/****************************************************************************** * * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ #include "iwl-dev.h" #include "iwl-agn.h" #include "iwl-sta.h" #include "iwl-core.h" #include "iwl-agn-calib.h" static int iwlagn_disable_bss(struct iwl_priv *priv, struct iwl_rxon_context *ctx, struct iwl_rxon_cmd *send) { __le32 old_filter = send->filter_flags; int ret; send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send); send->filter_flags = old_filter; if (ret) IWL_ERR(priv, "Error clearing ASSOC_MSK on BSS (%d)\n", ret); return ret; } static int iwlagn_disable_pan(struct iwl_priv *priv, struct iwl_rxon_context *ctx, struct iwl_rxon_cmd *send) { __le32 old_filter = send->filter_flags; u8 old_dev_type = send->dev_type; int ret; send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; send->dev_type = RXON_DEV_TYPE_P2P; ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send); send->filter_flags = old_filter; send->dev_type = old_dev_type; if (ret) IWL_ERR(priv, "Error disabling PAN (%d)\n", ret); /* FIXME: WAIT FOR PAN DISABLE */ msleep(300); return ret; } static int iwlagn_update_beacon(struct iwl_priv *priv, struct ieee80211_vif *vif) { lockdep_assert_held(&priv->mutex); dev_kfree_skb(priv->beacon_skb); priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif); if (!priv->beacon_skb) return -ENOMEM; return iwlagn_send_beacon_cmd(priv); } /** * iwlagn_commit_rxon - commit staging_rxon to hardware * * The RXON command in staging_rxon is committed to the hardware and * the active_rxon structure is updated with the new data. This * function correctly transitions out of the RXON_ASSOC_MSK state if * a HW tune is required based on the RXON structure changes. */ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) { /* cast away the const for active_rxon in this function */ struct iwl_rxon_cmd *active = (void *)&ctx->active; bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); int ret; lockdep_assert_held(&priv->mutex); if (!iwl_is_alive(priv)) return -EBUSY; /* This function hardcodes a bunch of dual-mode assumptions */ BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); if (!ctx->is_active) return 0; /* always get timestamp with Rx frame */ ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; else ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; ret = iwl_check_rxon_cmd(priv, ctx); if (ret) { IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); return -EINVAL; } /* * receive commit_rxon request * abort any previous channel switch if still in process */ if (priv->switch_rxon.switch_in_progress && (priv->switch_rxon.channel != ctx->staging.channel)) { IWL_DEBUG_11H(priv, "abort channel switch on %d\n", le16_to_cpu(priv->switch_rxon.channel)); iwl_chswitch_done(priv, false); } /* * If we don't need to send a full RXON, we can use * iwl_rxon_assoc_cmd which is used to reconfigure filter * and other flags for the current radio configuration. */ if (!iwl_full_rxon_required(priv, ctx)) { ret = iwl_send_rxon_assoc(priv, ctx); if (ret) { IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); return ret; } memcpy(active, &ctx->staging, sizeof(*active)); iwl_print_rx_config_cmd(priv, ctx); return 0; } if (priv->cfg->ops->hcmd->set_pan_params) { ret = priv->cfg->ops->hcmd->set_pan_params(priv); if (ret) return ret; } iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto); IWL_DEBUG_INFO(priv, "Going to commit RXON\n" " * with%s RXON_FILTER_ASSOC_MSK\n" " * channel = %d\n" " * bssid = %pM\n", (new_assoc ? "" : "out"), le16_to_cpu(ctx->staging.channel), ctx->staging.bssid_addr); /* * Always clear associated first, but with the correct config. * This is required as for example station addition for the * AP station must be done after the BSSID is set to correctly * set up filters in the device. */ if (ctx->ctxid == IWL_RXON_CTX_BSS) ret = iwlagn_disable_bss(priv, ctx, &ctx->staging); else ret = iwlagn_disable_pan(priv, ctx, &ctx->staging); if (ret) return ret; memcpy(active, &ctx->staging, sizeof(*active)); /* * Un-assoc RXON clears the station table and WEP * keys, so we have to restore those afterwards. */ iwl_clear_ucode_stations(priv, ctx); iwl_restore_stations(priv, ctx); ret = iwl_restore_default_wep_keys(priv, ctx); if (ret) { IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); return ret; } /* RXON timing must be before associated RXON */ ret = iwl_send_rxon_timing(priv, ctx); if (ret) { IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); return ret; } if (new_assoc) { /* * We'll run into this code path when beaconing is * enabled, but then we also need to send the beacon * to the device. */ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) { ret = iwlagn_update_beacon(priv, ctx->vif); if (ret) { IWL_ERR(priv, "Error sending required beacon (%d)!\n", ret); return ret; } } priv->start_calib = 0; /* * Apply the new configuration. * * Associated RXON doesn't clear the station table in uCode, * so we don't need to restore stations etc. after this. */ ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(struct iwl_rxon_cmd), &ctx->staging); if (ret) { IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); return ret; } memcpy(active, &ctx->staging, sizeof(*active)); /* IBSS beacon needs to be sent after setting assoc */ if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC)) if (iwlagn_update_beacon(priv, ctx->vif)) IWL_ERR(priv, "Error sending IBSS beacon\n"); } iwl_print_rx_config_cmd(priv, ctx); iwl_init_sensitivity(priv); /* * If we issue a new RXON command which required a tune then we must * send a new TXPOWER command or we won't be able to Tx any frames. * * FIXME: which RXON requires a tune? Can we optimise this out in * some cases? */ ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true); if (ret) { IWL_ERR(priv, "Error sending TX power (%d)\n", ret); return ret; } return 0; } static void iwlagn_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx) { int ret; if (!ctx->is_active) return; ctx->qos_data.def_qos_parm.qos_flags = 0; if (ctx->qos_data.qos_active) ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_UPDATE_EDCA_MSK; if (ctx->ht.enabled) ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", ctx->qos_data.qos_active, ctx->qos_data.def_qos_parm.qos_flags); ret = iwl_send_cmd_pdu(priv, ctx->qos_cmd, sizeof(struct iwl_qosparam_cmd), &ctx->qos_data.def_qos_parm); if (ret) IWL_ERR(priv, "Failed to update QoS\n"); } int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) { struct iwl_priv *priv = hw->priv; struct iwl_rxon_context *ctx; struct ieee80211_conf *conf = &hw->conf; struct ieee80211_channel *channel = conf->channel; const struct iwl_channel_info *ch_info; int ret = 0; bool ht_changed[NUM_IWL_RXON_CTX] = {}; IWL_DEBUG_MAC80211(priv, "changed %#x", changed); mutex_lock(&priv->mutex); if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) { IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); goto out; } if (!iwl_is_ready(priv)) { IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); goto out; } if (changed & (IEEE80211_CONF_CHANGE_SMPS | IEEE80211_CONF_CHANGE_CHANNEL)) { /* mac80211 uses static for non-HT which is what we want */ priv->current_ht_config.smps = conf->smps_mode; /* * Recalculate chain counts. * * If monitor mode is enabled then mac80211 will * set up the SM PS mode to OFF if an HT channel is * configured. */ if (priv->cfg->ops->hcmd->set_rxon_chain) for_each_context(priv, ctx) priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); } if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { unsigned long flags; ch_info = iwl_get_channel_info(priv, channel->band, channel->hw_value); if (!is_channel_valid(ch_info)) { IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); ret = -EINVAL; goto out; } spin_lock_irqsave(&priv->lock, flags); for_each_context(priv, ctx) { /* Configure HT40 channels */ if (ctx->ht.enabled != conf_is_ht(conf)) { ctx->ht.enabled = conf_is_ht(conf); ht_changed[ctx->ctxid] = true; } if (ctx->ht.enabled) { if (conf_is_ht40_minus(conf)) { ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; ctx->ht.is_40mhz = true; } else if (conf_is_ht40_plus(conf)) { ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; ctx->ht.is_40mhz = true; } else { ctx->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; ctx->ht.is_40mhz = false; } } else ctx->ht.is_40mhz = false; /* * Default to no protection. Protection mode will * later be set from BSS config in iwl_ht_conf */ ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; /* if we are switching from ht to 2.4 clear flags * from any ht related info since 2.4 does not * support ht */ if (le16_to_cpu(ctx->staging.channel) != channel->hw_value) ctx->staging.flags = 0; iwl_set_rxon_channel(priv, channel, ctx); iwl_set_rxon_ht(priv, &priv->current_ht_config); iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif); } spin_unlock_irqrestore(&priv->lock, flags); iwl_update_bcast_stations(priv); /* * The list of supported rates and rate mask can be different * for each band; since the band may have changed, reset * the rate mask to what mac80211 lists. */ iwl_set_rate(priv); } if (changed & (IEEE80211_CONF_CHANGE_PS | IEEE80211_CONF_CHANGE_IDLE)) { ret = iwl_power_update_mode(priv, false); if (ret) IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); } if (changed & IEEE80211_CONF_CHANGE_POWER) { IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", priv->tx_power_user_lmt, conf->power_level); iwl_set_tx_power(priv, conf->power_level, false); } for_each_context(priv, ctx) { if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) continue; iwlagn_commit_rxon(priv, ctx); if (ht_changed[ctx->ctxid]) iwlagn_update_qos(priv, ctx); } out: mutex_unlock(&priv->mutex); return ret; } static void iwlagn_check_needed_chains(struct iwl_priv *priv, struct iwl_rxon_context *ctx, struct ieee80211_bss_conf *bss_conf) { struct ieee80211_vif *vif = ctx->vif; struct iwl_rxon_context *tmp; struct ieee80211_sta *sta; struct iwl_ht_config *ht_conf = &priv->current_ht_config; bool need_multiple; lockdep_assert_held(&priv->mutex); switch (vif->type) { case NL80211_IFTYPE_STATION: rcu_read_lock(); sta = ieee80211_find_sta(vif, bss_conf->bssid); if (sta) { struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; int maxstreams; maxstreams = (ht_cap->mcs.tx_params & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; maxstreams += 1; need_multiple = true; if ((ht_cap->mcs.rx_mask[1] == 0) && (ht_cap->mcs.rx_mask[2] == 0)) need_multiple = false; if (maxstreams <= 1) need_multiple = false; } else { /* * If at all, this can only happen through a race * when the AP disconnects us while we're still * setting up the connection, in that case mac80211 * will soon tell us about that. */ need_multiple = false; } rcu_read_unlock(); break; case NL80211_IFTYPE_ADHOC: /* currently */ need_multiple = false; break; default: /* only AP really */ need_multiple = true; break; } ctx->ht_need_multiple_chains = need_multiple; if (!need_multiple) { /* check all contexts */ for_each_context(priv, tmp) { if (!tmp->vif) continue; if (tmp->ht_need_multiple_chains) { need_multiple = true; break; } } } ht_conf->single_chain_sufficient = !need_multiple; } void iwlagn_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, u32 changes) { struct iwl_priv *priv = hw->priv; struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); int ret; bool force = false; mutex_lock(&priv->mutex); if (changes & BSS_CHANGED_BEACON_INT) force = true; if (changes & BSS_CHANGED_QOS) { ctx->qos_data.qos_active = bss_conf->qos; iwlagn_update_qos(priv, ctx); } ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); if (vif->bss_conf.use_short_preamble) ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; else ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; if (changes & BSS_CHANGED_ASSOC) { if (bss_conf->assoc) { iwl_led_associate(priv); priv->timestamp = bss_conf->timestamp; ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; } else { ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; iwl_led_disassociate(priv); } } if (ctx->ht.enabled) { ctx->ht.protection = bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); iwlagn_check_needed_chains(priv, ctx, bss_conf); iwl_set_rxon_ht(priv, &priv->current_ht_config); } if (priv->cfg->ops->hcmd->set_rxon_chain) priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx); if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK; else ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; if (bss_conf->use_cts_prot) ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; else ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN; memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); if (vif->type == NL80211_IFTYPE_AP || vif->type == NL80211_IFTYPE_ADHOC) { if (vif->bss_conf.enable_beacon) { ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; priv->beacon_ctx = ctx; } else { ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; priv->beacon_ctx = NULL; } } if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) iwlagn_commit_rxon(priv, ctx); if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) { /* * The chain noise calibration will enable PM upon * completion. If calibration has already been run * then we need to enable power management here. */ if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) iwl_power_update_mode(priv, false); /* Enable RX differential gain and sensitivity calibrations */ iwl_chain_noise_reset(priv); priv->start_calib = 1; } if (changes & BSS_CHANGED_IBSS) { ret = iwlagn_manage_ibss_station(priv, vif, bss_conf->ibss_joined); if (ret) IWL_ERR(priv, "failed to %s IBSS station %pM\n", bss_conf->ibss_joined ? "add" : "remove", bss_conf->bssid); } if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC && priv->beacon_ctx) { if (iwlagn_update_beacon(priv, vif)) IWL_ERR(priv, "Error sending IBSS beacon\n"); } mutex_unlock(&priv->mutex); } void iwlagn_post_scan(struct iwl_priv *priv) { struct iwl_rxon_context *ctx; /* * Since setting the RXON may have been deferred while * performing the scan, fire one off if needed */ for_each_context(priv, ctx) if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) iwlagn_commit_rxon(priv, ctx); if (priv->cfg->ops->hcmd->set_pan_params) priv->cfg->ops->hcmd->set_pan_params(priv); }