/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __ODM_DBG_H__ #define __ODM_DBG_H__ //----------------------------------------------------------------------------- // Define the debug levels // // 1. DBG_TRACE and DBG_LOUD are used for normal cases. // So that, they can help SW engineer to develope or trace states changed // and also help HW enginner to trace every operation to and from HW, // e.g IO, Tx, Rx. // // 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, // which help us to debug SW or HW. // //----------------------------------------------------------------------------- // // Never used in a call to ODM_RT_TRACE()! // #define ODM_DBG_OFF 1 // // Fatal bug. // For example, Tx/Rx/IO locked up, OS hangs, memory access violation, // resource allocation failed, unexpected HW behavior, HW BUG and so on. // #define ODM_DBG_SERIOUS 2 // // Abnormal, rare, or unexpeted cases. // For example, IRP/Packet/OID canceled, device suprisely unremoved and so on. // #define ODM_DBG_WARNING 3 // // Normal case with useful information about current SW or HW state. // For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status, // SW protocol state change, dynamic mechanism state change and so on. // #define ODM_DBG_LOUD 4 // // Normal case with detail execution flow or information. // #define ODM_DBG_TRACE 5 //----------------------------------------------------------------------------- // Define the tracing components // //----------------------------------------------------------------------------- //BB Functions #define ODM_COMP_DIG BIT0 #define ODM_COMP_RA_MASK BIT1 #define ODM_COMP_DYNAMIC_TXPWR BIT2 #define ODM_COMP_FA_CNT BIT3 #define ODM_COMP_RSSI_MONITOR BIT4 #define ODM_COMP_CCK_PD BIT5 #define ODM_COMP_ANT_DIV BIT6 #define ODM_COMP_PWR_SAVE BIT7 #define ODM_COMP_PWR_TRAIN BIT8 #define ODM_COMP_RATE_ADAPTIVE BIT9 #define ODM_COMP_PATH_DIV BIT10 #define ODM_COMP_PSD BIT11 #define ODM_COMP_DYNAMIC_PRICCA BIT12 #define ODM_COMP_RXHP BIT13 //MAC Functions #define ODM_COMP_EDCA_TURBO BIT16 #define ODM_COMP_EARLY_MODE BIT17 //RF Functions #define ODM_COMP_TX_PWR_TRACK BIT24 #define ODM_COMP_RX_GAIN_TRACK BIT25 #define ODM_COMP_CALIBRATION BIT26 //Common Functions #define ODM_COMP_COMMON BIT30 #define ODM_COMP_INIT BIT31 /*------------------------Export Marco Definition---------------------------*/ #if (DM_ODM_SUPPORT_TYPE == ODM_MP) #define RT_PRINTK DbgPrint #elif (DM_ODM_SUPPORT_TYPE == ODM_CE) #define DbgPrint printk #define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args); #else #define DbgPrint panic_printk #define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args); #endif #ifndef ASSERT #define ASSERT(expr) #endif #if DBG #define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \ if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \ { \ if(pDM_Odm->SupportICType == ODM_RTL8192C) \ DbgPrint("[ODM-92C] "); \ else if(pDM_Odm->SupportICType == ODM_RTL8192D) \ DbgPrint("[ODM-92D] "); \ else if(pDM_Odm->SupportICType == ODM_RTL8723A) \ DbgPrint("[ODM-8723A] "); \ else if(pDM_Odm->SupportICType == ODM_RTL8188E) \ DbgPrint("[ODM-8188E] "); \ else if(pDM_Odm->SupportICType == ODM_RTL8812) \ DbgPrint("[ODM-8812] "); \ else if(pDM_Odm->SupportICType == ODM_RTL8821) \ DbgPrint("[ODM-8821] "); \ RT_PRINTK fmt; \ } #define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \ if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \ { \ RT_PRINTK fmt; \ } #define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \ if(!(expr)) { \ DbgPrint( "Assertion failed! %s at ......\n", #expr); \ DbgPrint( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \ RT_PRINTK fmt; \ ASSERT(FALSE); \ } #define ODM_dbg_enter() { DbgPrint("==> %s\n", __FUNCTION__); } #define ODM_dbg_exit() { DbgPrint("<== %s\n", __FUNCTION__); } #define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __FUNCTION__, str); } #define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \ if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \ { \ int __i; \ pu1Byte __ptr = (pu1Byte)ptr; \ DbgPrint("[ODM] "); \ DbgPrint(title_str); \ DbgPrint(" "); \ for( __i=0; __i<6; __i++ ) \ DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-"); \ DbgPrint("\n"); \ } #else #define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) #define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) #define ODM_RT_ASSERT(pDM_Odm, expr, fmt) #define ODM_dbg_enter() #define ODM_dbg_exit() #define ODM_dbg_trace(str) #define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) #endif VOID ODM_InitDebugSetting( IN PDM_ODM_T pDM_Odm ); #if 0 #if DBG #define DbgPrint printk #define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \ { \ char *szTitle = _TitleString; \ pu1Byte pbtHexData = _HexData; \ u4Byte u4bHexDataLen = _HexDataLen; \ u4Byte __i; \ DbgPrint("%s", szTitle); \ for (__i=0;__i=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22. #define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \ if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \ { \ int __i; \ u1Byte buffer[MAX_STR_LEN]; \ int length = (_Len\n", _Len, buffer); \ } #else // of #if DBG #define DbgPrint(...) #define PRINT_DATA(_TitleString, _HexData, _HexDataLen) #define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) #define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) #define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) #define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) #endif // of #if DBG #endif #if 0 /* Define debug print header for every service module.*/ typedef struct tag_ODM_DBGP_Service_Module_Header_Name_Structure { const char *pMANS; const char *pRTOS; const char *pALM; const char *pPEM; const char *pCMPK; const char *pRAPD; const char *pTXPB; const char *pQUMG; }ODM_DBGP_HEAD_T; /* Define different debug flag for dedicated service modules in debug flag array. */ // Each module has independt 32 bit debug flag you cnn define the flag as yout require. typedef enum tag_ODM_DBGP_Flag_Type_Definition { ODM_FTX = 0, ODM_FRX , ODM_FPHY , ODM_FPWR , ODM_FDM , ODM_FC2H , ODM_FBT , ODM_DBGP_TYPE_MAX }ODM_DBGP_FLAG_E; // Define TX relative debug bit --> FTX #define ODM_TX_DESC BIT0 #define ODM_TX_DESC_TID BIT1 #define ODM_TX_PATH BIT2 // Define RX relative debug bit --> FRX #define ODM_RX_DATA BIT0 #define ODM_RX_PHY_STS BIT1 #define ODM_RX_PHY_SS BIT2 #define ODM_RX_PHY_SQ BIT3 #define ODM_RX_PHY_ASTS BIT4 #define ODM_RX_ERR_LEN BIT5 #define ODM_RX_DEFRAG BIT6 #define ODM_RX_ERR_RATE BIT7 #define ODM_RX_PATH BIT8 #define ODM_RX_BEACON BIT9 // Define PHY-BB/RF/MAC check module bit --> FPHY #define ODM_PHY_BBR BIT0 #define ODM_PHY_BBW BIT1 #define ODM_PHY_RFR BIT2 #define ODM_PHY_RFW BIT3 #define ODM_PHY_MACR BIT4 #define ODM_PHY_MACW BIT5 #define ODM_PHY_ALLR BIT6 #define ODM_PHY_ALLW BIT7 #define ODM_PHY_TXPWR BIT8 #define ODM_PHY_PWRDIFF BIT9 #define ODM_PHY_SICR BIT10 #define ODM_PHY_SICW BIT11 extern u4Byte ODM_GlobalDebugLevel; #if DBG extern u8Byte ODM_GlobalDebugComponents; #endif #endif #if 0 //----------------------------------------------------------------------------- // Define the debug levels // // 1. DBG_TRACE and DBG_LOUD are used for normal cases. // So that, they can help SW engineer to develope or trace states changed // and also help HW enginner to trace every operation to and from HW, // e.g IO, Tx, Rx. // // 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, // which help us to debug SW or HW. // //----------------------------------------------------------------------------- // // Never used in a call to ODM_RT_TRACE(pDM_Odm,)! // #define DBG_OFF 0 // // Deprecated! Don't use it! // TODO: fix related debug message! // //#define DBG_SEC 1 // // Fatal bug. // For example, Tx/Rx/IO locked up, OS hangs, memory access violation, // resource allocation failed, unexpected HW behavior, HW BUG and so on. // #define DBG_SERIOUS 2 // // Abnormal, rare, or unexpeted cases. // For example, IRP/Packet/OID canceled, device suprisely unremoved and so on. // #define DBG_WARNING 3 // // Normal case with useful information about current SW or HW state. // For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status, // SW protocol state change, dynamic mechanism state change and so on. // #define DBG_LOUD 4 // // Normal case with detail execution flow or information. // #define DBG_TRACE 5 //----------------------------------------------------------------------------- // Define the tracing components // //----------------------------------------------------------------------------- #define COMP_TRACE BIT0 // For function call tracing. #define COMP_DBG BIT1 // Only for temporary debug message. #define COMP_INIT BIT2 // during driver initialization / halt / reset. #define COMP_OID_QUERY BIT3 // Query OID. #define COMP_OID_SET BIT4 // Set OID. #define COMP_RECV BIT5 // Reveive part data path. #define COMP_SEND BIT6 // Send part path. #define COMP_IO BIT7 // I/O Related. Added by Annie, 2006-03-02. #define COMP_POWER BIT8 // 802.11 Power Save mode or System/Device Power state related. #define COMP_MLME BIT9 // 802.11 link related: join/start BSS, leave BSS. #define COMP_SCAN BIT10 // For site survey. #define COMP_SYSTEM BIT11 // For general platform function. #define COMP_SEC BIT12 // For Security. #define COMP_AP BIT13 // For AP mode related. #define COMP_TURBO BIT14 // For Turbo Mode related. By Annie, 2005-10-21. #define COMP_QOS BIT15 // For QoS. #define COMP_AUTHENTICATOR BIT16 // For AP mode Authenticator. Added by Annie, 2006-01-30. #define COMP_BEACON BIT17 // For Beacon related, by rcnjko. #define COMP_ANTENNA BIT18 // For Antenna diversity related, by rcnjko. #define COMP_RATE BIT19 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. #define COMP_EVENTS 0x00000080 // Event handling #define COMP_EVENTS BIT20 // Event handling #define COMP_FPGA BIT21 // For FPGA verfication #define COMP_RM BIT22 // For Radio Measurement. #define COMP_MP BIT23 // For mass production test, by shien chang, 2006.07.13 #define COMP_RXDESC BIT24 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15. #define COMP_CKIP BIT25 // For CCX 1 S13: CKIP. Added by Annie, 2006-08-14. #define COMP_DIG BIT26 // For DIG, 2006.09.25, by rcnjko. #define COMP_TXAGC BIT27 // For Tx power, 060928, by rcnjko. #define COMP_HIPWR BIT28 // For High Power Mechanism, 060928, by rcnjko. #define COMP_HALDM BIT29 // For HW Dynamic Mechanism, 061010, by rcnjko. #define COMP_RSNA BIT30 // For RSNA IBSS , 061201, by CCW. #define COMP_INDIC BIT31 // For link indication #define COMP_LED BIT32 // For LED. #define COMP_RF BIT33 // For RF. //1!!!!!!!!!!!!!!!!!!!!!!!!!!! //1//1Attention Please!!!<11n or 8190 specific code should be put below this line> //1!!!!!!!!!!!!!!!!!!!!!!!!!!! #define COMP_HT BIT34 // For 802.11n HT related information. by Emily 2006-8-11 #define COMP_POWER_TRACKING BIT35 //FOR 8190 TX POWER TRACKING #define COMP_RX_REORDER BIT36 // 8190 Rx Reorder #define COMP_AMSDU BIT37 // For A-MSDU Debugging #define COMP_WPS BIT38 //WPS Debug Message #define COMP_RATR BIT39 #define COMP_RESET BIT40 // For debug command to print on dbgview!! #define COMP_CMD BIT41 #define COMP_EFUSE BIT42 #define COMP_MESH_INTERWORKING BIT43 #define COMP_CCX BIT44 //CCX Debug Flag #define COMP_IOCTL BIT45 // IO Control #define COMP_GP BIT46 // For generic parser. #define COMP_TXAGG BIT47 #define COMP_HVL BIT48 // For Ndis 6.2 Context Swirch and Hardware Virtualiztion Layer #define COMP_TEST BIT49 #define COMP_BB_POWERSAVING BIT50 #define COMP_SWAS BIT51 // For SW Antenna Switch #define COMP_P2P BIT52 #define COMP_MUX BIT53 #define COMP_FUNC BIT54 #define COMP_TDLS BIT55 #define COMP_OMNIPEEK BIT56 #define COMP_DUALMACSWITCH BIT60 // 2010/12/27 Add for Dual mac mode debug #define COMP_EASY_CONCURRENT BIT61 // 2010/12/27 Add for easy cncurrent mode debug #define COMP_PSD BIT63 //2011/3/9 Add for WLAN PSD for BT AFH #define COMP_DFS BIT62 #define COMP_ALL UINT64_C(0xFFFFFFFFFFFFFFFF) // All components // For debug print flag to use /*------------------------------Define structure----------------------------*/ /* 2007/07/13 MH *//*------For DeBuG Print modeue------*/ /* Defnie structure to store different debug flag variable. Every debug flag is a UINT32 integer and you can assign 32 different events. */ typedef struct tag_DBGP_Debug_Flag_Structure { u4Byte Mans; /* Main Scheduler module. */ u4Byte Rtos; /* RTOS module. */ u4Byte Alarm; /* Alarm module. */ u4Byte Pm; /* Performance monitor module. */ }DBGP_FLAG_T; /* Define debug print header for every service module.*/ typedef struct tag_DBGP_Service_Module_Header_Name_Structure { const char *pMANS; const char *pRTOS; const char *pALM; const char *pPEM; const char *pCMPK; const char *pRAPD; const char *pTXPB; const char *pQUMG; }DBGP_HEAD_T; /* Define different debug flag for dedicated service modules in debug flag array. */ // Each module has independt 32 bit debug flag you cnn define the flag as yout require. typedef enum tag_DBGP_Flag_Type_Definition { FQoS = 0, FTX = 1, FRX = 2, FSEC = 3, FMGNT = 4, FMLME = 5, FRESOURCE = 6, FBEACON = 7, FISR = 8, FPHY = 9, FMP = 10, FEEPROM = 11, FPWR = 12, FDM = 13, FDBG_CTRL = 14, FC2H = 15, FBT = 16, FINIT = 17, FIOCTL = 18, FSHORT_CUT = 19, DBGP_TYPE_MAX }DBGP_FLAG_E; // Define Qos Relative debug flag bit --> FQoS #define QoS_INIT BIT0 #define QoS_VISTA BIT1 // Define TX relative debug bit --> FTX #define TX_DESC BIT0 #define TX_DESC_TID BIT1 #define TX_PATH BIT2 // Define RX relative debug bit --> FRX #define RX_DATA BIT0 #define RX_PHY_STS BIT1 #define RX_PHY_SS BIT2 #define RX_PHY_SQ BIT3 #define RX_PHY_ASTS BIT4 #define RX_ERR_LEN BIT5 #define RX_DEFRAG BIT6 #define RX_ERR_RATE BIT7 #define RX_PATH BIT8 #define RX_BEACON BIT9 // Define Security relative debug bit --> FSEC // Define MGNT relative debug bit --> FMGNT // Define MLME relative debug bit --> FMLME #define MEDIA_STS BIT0 #define LINK_STS BIT1 // Define OS resource check module bit --> FRESOURCE #define OS_CHK BIT0 // Define beacon content check module bit --> FBEACON #define BCN_SHOW BIT0 #define BCN_PEER BIT1 // Define ISR/IMR check module bit --> FISR #define ISR_CHK BIT0 // Define PHY-BB/RF/MAC check module bit --> FPHY #define PHY_BBR BIT0 #define PHY_BBW BIT1 #define PHY_RFR BIT2 #define PHY_RFW BIT3 #define PHY_MACR BIT4 #define PHY_MACW BIT5 #define PHY_ALLR BIT6 #define PHY_ALLW BIT7 #define PHY_TXPWR BIT8 #define PHY_PWRDIFF BIT9 #define PHY_SICR BIT10 #define PHY_SICW BIT11 // Define MPT driver check module bit --> FMP #define MP_RX BIT0 #define MP_SWICH_CH BIT1 // Define EEPROM and EFUSE check module bit --> FEEPROM #define EEPROM_W BIT0 #define EFUSE_PG BIT1 #define EFUSE_READ_ALL BIT2 #define EFUSE_ANALYSIS BIT3 #define EFUSE_PG_DETAIL BIT4 // Define power save check module bit --> FPWR #define LPS BIT0 #define IPS BIT1 #define PWRSW BIT2 #define PWRHW BIT3 #define PWRHAL BIT4 // Define Dynamic Mechanism check module bit --> FDM #define WA_IOT BIT0 #define DM_PWDB BIT1 #define DM_Monitor BIT2 #define DM_DIG BIT3 #define DM_EDCA_Turbo BIT4 #define DM_BT30 BIT5 // Define Dbg Control module bit --> FDBG_CTRL #define DBG_CTRL_TRACE BIT0 #define DBG_CTRL_INBAND_NOISE BIT1 // Define FW C2H Cmd check module bit --> FC2H #define C2H_Summary BIT0 #define C2H_PacketData BIT1 #define C2H_ContentData BIT2 // Define BT Cmd check module bit --> FBT #define BT_TRACE BIT0 #define BT_RFPoll BIT1 // Define init check for module bit --> FINIT #define INIT_EEPROM BIT0 #define INIT_TxPower BIT1 #define INIT_IQK BIT2 #define INIT_RF BIT3 // Define IOCTL Cmd check module bit --> FIOCTL // section 1 : IRP related #define IOCTL_IRP BIT0 #define IOCTL_IRP_DETAIL BIT1 #define IOCTL_IRP_STATISTICS BIT2 #define IOCTL_IRP_HANDLE BIT3 // section 2 : HCI command/event #define IOCTL_BT_HCICMD BIT8 #define IOCTL_BT_HCICMD_DETAIL BIT9 #define IOCTL_BT_HCICMD_EXT BIT10 #define IOCTL_BT_EVENT BIT11 #define IOCTL_BT_EVENT_DETAIL BIT12 #define IOCTL_BT_EVENT_PERIODICAL BIT13 // section 3 : BT tx/rx data and throughput #define IOCTL_BT_TX_ACLDATA BIT16 #define IOCTL_BT_TX_ACLDATA_DETAIL BIT17 #define IOCTL_BT_RX_ACLDATA BIT18 #define IOCTL_BT_RX_ACLDATA_DETAIL BIT19 #define IOCTL_BT_TP BIT20 // section 4 : BT connection state machine. #define IOCTL_STATE BIT21 #define IOCTL_BT_LOGO BIT22 // section 5 : BT function trace #define IOCTL_CALLBACK_FUN BIT24 #define IOCTL_PARSE_BT_PKT BIT25 #define IOCTL_BT_TX_PKT BIT26 #define IOCTL_BT_FLAG_MON BIT27 // // Define init check for module bit --> FSHORT_CUT // 2011/07/20 MH Add for short but definition. // #define SHCUT_TX BIT0 #define SHCUT_RX BIT1 /* 2007/07/13 MH *//*------For DeBuG Print modeue------*/ /*------------------------------Define structure----------------------------*/ /*------------------------Export Marco Definition---------------------------*/ #if (DM_ODM_SUPPORT_TYPE != ODM_MP) #define RT_PRINTK(fmt, args...) printk( "%s(): " fmt, __FUNCTION__, ## args); #if DBG #define ODM_RT_TRACE(pDM_Odm,comp, level, fmt) \ if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \ { \ RT_PRINTK fmt; \ } #define RT_TRACE_F(comp, level, fmt) \ if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \ { \ RT_PRINTK fmt; \ } #define RT_ASSERT(expr,fmt) \ if(!(expr)) { \ printk( "Assertion failed! %s at ......\n", #expr); \ printk( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \ } #define dbg_enter() { printk("==> %s\n", __FUNCTION__); } #define dbg_exit() { printk("<== %s\n", __FUNCTION__); } #define dbg_trace(str) { printk("%s:%s\n", __FUNCTION__, str); } #else #define ODM_RT_TRACE(pDM_Odm,comp, level, fmt) #define RT_TRACE_F(comp, level, fmt) #define RT_ASSERT(expr, fmt) #define dbg_enter() #define dbg_exit() #define dbg_trace(str) #endif #if DBG #define DbgPrint printk #define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \ { \ char *szTitle = _TitleString; \ pu1Byte pbtHexData = _HexData; \ u4Byte u4bHexDataLen = _HexDataLen; \ u4Byte __i; \ DbgPrint("%s", szTitle); \ for (__i=0;__i=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22. #define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \ if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \ { \ int __i; \ u1Byte buffer[MAX_STR_LEN]; \ int length = (_Len\n", _Len, buffer); \ } #else // of #if DBG #define DbgPrint(...) #define PRINT_DATA(_TitleString, _HexData, _HexDataLen) #define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) #define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) #define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) #define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) #endif // of #if DBG #endif // #if (DM_ODM_SUPPORT_TYPE != ODM_MP) #define DEBUG_PRINT 1 // Please add new OS's print API by yourself //#if (RT_PLATFORM==PLATFORM_WINDOWS) #if (DEBUG_PRINT == 1) && DBG #define RTPRINT(dbgtype, dbgflag, printstr)\ {\ if (DBGP_Type[dbgtype] & dbgflag)\ {\ DbgPrint printstr;\ }\ } #define RTPRINT_ADDR(dbgtype, dbgflag, printstr, _Ptr)\ {\ if (DBGP_Type[dbgtype] & dbgflag)\ {\ int __i; \ pu1Byte ptr = (pu1Byte)_Ptr; \ DbgPrint printstr; \ DbgPrint(" "); \ for( __i=0; __i<6; __i++ ) \ DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \ DbgPrint("\n"); \ }\ } #define RTPRINT_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)\ {\ if (DBGP_Type[dbgtype] & dbgflag)\ {\ int __i; \ pu1Byte ptr = (pu1Byte)_HexData; \ DbgPrint(_TitleString); \ for( __i=0; __i<(int)_HexDataLen; __i++ ) \ { \ DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" ");\ if (((__i + 1) % 16) == 0) DbgPrint("\n");\ } \ DbgPrint("\n"); \ }\ } #define FuncEntry FunctionIn(COMP_FUNC) #define FuncExit FunctionOut(COMP_FUNC) #define FunctionIn(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("==========> %s\n", __FUNCTION__)) #define FunctionOut(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("<========== %s\n", __FUNCTION__)) #else #define DBGP(dbgtype, dbgflag, printstr) #define RTPRINT(dbgtype, dbgflag, printstr) #define RTPRINT_ADDR(dbgtype, dbgflag, printstr, _Ptr) #define RTPRINT_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen) #define FuncEntry #define FuncExit #define FunctionIn(_comp) #define FunctionOut(_comp) #endif /*------------------------Export Marco Definition---------------------------*/ /*------------------------Export global variable----------------------------*/ extern u4Byte DBGP_Type[DBGP_TYPE_MAX]; extern DBGP_HEAD_T DBGP_Head; /*------------------------Export global variable----------------------------*/ /*--------------------------Exported Function prototype---------------------*/ extern void DBGP_Flag_Init(void); extern void DBG_PrintAllFlag(void); extern void DBG_PrintAllComp(void); extern void DBG_PrintFlagEvent(u1Byte DbgFlag); extern void DBG_DumpMem(const u1Byte DbgComp, const u1Byte DbgLevel, pu1Byte pMem, u2Byte Len); /*--------------------------Exported Function prototype---------------------*/ extern u4Byte GlobalDebugLevel; extern u8Byte GlobalDebugComponents; #endif #endif // __ODM_DBG_H__