/* * drivers/serial/tegra_hsuart.c * * High-speed serial driver for NVIDIA Tegra SoCs * * Copyright (C) 2009 NVIDIA Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ /*#define DEBUG 1*/ /*#define VERBOSE_DEBUG 1*/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE) #define BYTES_TO_ALIGN(x) ((unsigned long)(ALIGN((x), sizeof(u32))) - \ (unsigned long)(x)) #define UART_RX_DMA_BUFFER_SIZE (2048*4) #define UART_LSR_FIFOE 0x80 #define UART_IER_EORD 0x20 #define UART_MCR_RTS_EN 0x40 #define UART_MCR_CTS_EN 0x20 #define UART_LSR_ANY (UART_LSR_OE | UART_LSR_BI | \ UART_LSR_PE | UART_LSR_FE) #define TX_FORCE_PIO 0 #define RX_FORCE_PIO 0 const int dma_req_sel[] = { TEGRA_DMA_REQ_SEL_UARTA, TEGRA_DMA_REQ_SEL_UARTB, TEGRA_DMA_REQ_SEL_UARTC, TEGRA_DMA_REQ_SEL_UARTD, TEGRA_DMA_REQ_SEL_UARTE, }; #define TEGRA_TX_PIO 1 #define TEGRA_TX_DMA 2 #define TEGRA_UART_MIN_DMA 16 #define TEGRA_UART_FIFO_SIZE 8 /* Tx fifo trigger level setting in tegra uart is in * reverse way then conventional uart */ #define TEGRA_UART_TX_TRIG_16B 0x00 #define TEGRA_UART_TX_TRIG_8B 0x10 #define TEGRA_UART_TX_TRIG_4B 0x20 #define TEGRA_UART_TX_TRIG_1B 0x30 struct tegra_uart_port { struct uart_port uport; char port_name[32]; /* Module info */ unsigned long size; struct clk *clk; unsigned int baud; /* Register shadow */ unsigned char fcr_shadow; unsigned char mcr_shadow; unsigned char lcr_shadow; unsigned char ier_shadow; bool use_cts_control; bool rts_active; int tx_in_progress; unsigned int tx_bytes; dma_addr_t xmit_dma_addr; /* TX DMA */ struct tegra_dma_req tx_dma_req; struct tegra_dma_channel *tx_dma; /* RX DMA */ struct tegra_dma_req rx_dma_req; struct tegra_dma_channel *rx_dma; bool use_rx_dma; bool use_tx_dma; bool rx_timeout; int rx_in_progress; }; static inline u8 uart_readb(struct tegra_uart_port *t, unsigned long reg) { u8 val = readb(t->uport.membase + (reg << t->uport.regshift)); dev_vdbg(t->uport.dev, "%s: %p %03lx = %02x\n", __func__, t->uport.membase, reg << t->uport.regshift, val); return val; } static inline void uart_writeb(struct tegra_uart_port *t, u8 val, unsigned long reg) { dev_vdbg(t->uport.dev, "%s: %p %03lx %02x\n", __func__, t->uport.membase, reg << t->uport.regshift, val); writeb(val, t->uport.membase + (reg << t->uport.regshift)); } static inline void uart_writel(struct tegra_uart_port *t, u32 val, unsigned long reg) { dev_vdbg(t->uport.dev, "%s: %p %03lx %08x\n", __func__, t->uport.membase, reg << t->uport.regshift, val); writel(val, t->uport.membase + (reg << t->uport.regshift)); } static void tegra_set_baudrate(struct tegra_uart_port *t, unsigned int baud); static void tegra_set_mctrl(struct uart_port *u, unsigned int mctrl); static void do_handle_rx_pio(struct tegra_uart_port *t); static void do_handle_rx_dma(struct tegra_uart_port *t); static void set_rts(struct tegra_uart_port *t, bool active); static void set_dtr(struct tegra_uart_port *t, bool active); static void fill_tx_fifo(struct tegra_uart_port *t, int max_bytes) { int i; struct circ_buf *xmit = &t->uport.state->xmit; for (i = 0; i < max_bytes; i++) { BUG_ON(uart_circ_empty(xmit)); uart_writeb(t, xmit->buf[xmit->tail], UART_TX); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); t->uport.icount.tx++; } } static void tegra_start_pio_tx(struct tegra_uart_port *t, unsigned int bytes) { if (bytes > TEGRA_UART_FIFO_SIZE) bytes = TEGRA_UART_FIFO_SIZE; t->fcr_shadow &= ~UART_FCR_T_TRIG_11; t->fcr_shadow |= TEGRA_UART_TX_TRIG_8B; uart_writeb(t, t->fcr_shadow, UART_FCR); t->tx_in_progress = TEGRA_TX_PIO; t->tx_bytes = bytes; t->ier_shadow |= UART_IER_THRI; uart_writeb(t, t->ier_shadow, UART_IER); } static void tegra_start_dma_tx(struct tegra_uart_port *t, unsigned long bytes) { struct circ_buf *xmit; xmit = &t->uport.state->xmit; dma_sync_single_for_device(t->uport.dev, t->xmit_dma_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); t->fcr_shadow &= ~UART_FCR_T_TRIG_11; t->fcr_shadow |= TEGRA_UART_TX_TRIG_4B; uart_writeb(t, t->fcr_shadow, UART_FCR); t->tx_bytes = bytes & ~(sizeof(u32)-1); t->tx_dma_req.source_addr = t->xmit_dma_addr + xmit->tail; t->tx_dma_req.size = t->tx_bytes; t->tx_in_progress = TEGRA_TX_DMA; tegra_dma_enqueue_req(t->tx_dma, &t->tx_dma_req); } /* Called with u->lock taken */ static void tegra_start_next_tx(struct tegra_uart_port *t) { unsigned long tail; unsigned long count; struct circ_buf *xmit; xmit = &t->uport.state->xmit; tail = (unsigned long)&xmit->buf[xmit->tail]; count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); dev_vdbg(t->uport.dev, "+%s %lu %d\n", __func__, count, t->tx_in_progress); if (count == 0) goto out; if (!t->use_tx_dma || count < TEGRA_UART_MIN_DMA) tegra_start_pio_tx(t, count); else if (BYTES_TO_ALIGN(tail) > 0) tegra_start_pio_tx(t, BYTES_TO_ALIGN(tail)); else tegra_start_dma_tx(t, count); out: dev_vdbg(t->uport.dev, "-%s", __func__); } /* Called by serial core driver with u->lock taken. */ static void tegra_start_tx(struct uart_port *u) { struct tegra_uart_port *t; struct circ_buf *xmit; t = container_of(u, struct tegra_uart_port, uport); xmit = &u->state->xmit; if (!uart_circ_empty(xmit) && !t->tx_in_progress) tegra_start_next_tx(t); } static int tegra_start_dma_rx(struct tegra_uart_port *t) { wmb(); if (tegra_dma_enqueue_req(t->rx_dma, &t->rx_dma_req)) { dev_err(t->uport.dev, "Could not enqueue Rx DMA req\n"); return -EINVAL; } return 0; } static void tegra_rx_dma_threshold_callback(struct tegra_dma_req *req) { struct tegra_uart_port *t = req->dev; struct uart_port *u = &t->uport; unsigned long flags; spin_lock_irqsave(&u->lock, flags); do_handle_rx_dma(t); spin_unlock_irqrestore(&u->lock, flags); } /* It is expected that the callers take the UART lock when this API is called. * * There are 2 contexts when this function is called: * * 1. DMA ISR - DMA ISR triggers the threshold complete calback, which calls the * dequue API which in-turn calls this callback. UART lock is taken during * the call to the threshold callback. * * 2. UART ISR - UART calls the dequue API which in-turn will call this API. * In this case, UART ISR takes the UART lock. * */ static void tegra_rx_dma_complete_callback(struct tegra_dma_req *req) { struct tegra_uart_port *t = req->dev; struct uart_port *u = &t->uport; struct tty_struct *tty = u->state->port.tty; /* If we are here, DMA is stopped */ dev_dbg(t->uport.dev, "%s: %d %d\n", __func__, req->bytes_transferred, req->status); if (req->bytes_transferred) { t->uport.icount.rx += req->bytes_transferred; tty_insert_flip_string(tty, ((unsigned char *)(req->virt_addr)), req->bytes_transferred); } do_handle_rx_pio(t); /* Push the read data later in caller place. */ if (req->status == -TEGRA_DMA_REQ_ERROR_ABORTED) return; spin_unlock(&u->lock); tty_flip_buffer_push(u->state->port.tty); spin_lock(&u->lock); } /* Lock already taken */ static void do_handle_rx_dma(struct tegra_uart_port *t) { struct uart_port *u = &t->uport; if (t->rts_active) set_rts(t, false); tegra_dma_dequeue(t->rx_dma); tty_flip_buffer_push(u->state->port.tty); /* enqueue the request again */ tegra_start_dma_rx(t); if (t->rts_active) set_rts(t, true); } static char do_decode_rx_error(struct tegra_uart_port *t, u8 lsr) { char flag = TTY_NORMAL; if (unlikely(lsr & UART_LSR_ANY)) { if (lsr & UART_LSR_OE) { /* Overrrun error */ flag |= TTY_OVERRUN; t->uport.icount.overrun++; dev_err(t->uport.dev, "Got overrun errors\n"); } else if (lsr & UART_LSR_PE) { /* Parity error */ flag |= TTY_PARITY; t->uport.icount.parity++; dev_err(t->uport.dev, "Got Parity errors\n"); } else if (lsr & UART_LSR_FE) { flag |= TTY_FRAME; t->uport.icount.frame++; dev_err(t->uport.dev, "Got frame errors\n"); } else if (lsr & UART_LSR_BI) { dev_err(t->uport.dev, "Got Break\n"); t->uport.icount.brk++; /* If FIFO read error without any data, reset Rx FIFO */ if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE)) { unsigned char fcr = t->fcr_shadow; fcr |= UART_FCR_CLEAR_RCVR; uart_writeb(t, fcr, UART_FCR); } } } return flag; } static void do_handle_rx_pio(struct tegra_uart_port *t) { int count = 0; do { char flag = TTY_NORMAL; unsigned char lsr = 0; unsigned char ch; lsr = uart_readb(t, UART_LSR); if (!(lsr & UART_LSR_DR)) break; flag = do_decode_rx_error(t, lsr); ch = uart_readb(t, UART_RX); t->uport.icount.rx++; count++; if (!uart_handle_sysrq_char(&t->uport, c)) uart_insert_char(&t->uport, lsr, UART_LSR_OE, ch, flag); } while (1); dev_dbg(t->uport.dev, "PIO received %d bytes\n", count); return; } static void do_handle_modem_signal(struct uart_port *u) { unsigned char msr; struct tegra_uart_port *t; t = container_of(u, struct tegra_uart_port, uport); msr = uart_readb(t, UART_MSR); if (msr & UART_MSR_CTS) dev_dbg(u->dev, "CTS triggered\n"); if (msr & UART_MSR_DSR) dev_dbg(u->dev, "DSR enabled\n"); if (msr & UART_MSR_DCD) dev_dbg(u->dev, "CD enabled\n"); if (msr & UART_MSR_RI) dev_dbg(u->dev, "RI enabled\n"); return; } static void do_handle_tx_pio(struct tegra_uart_port *t) { struct circ_buf *xmit = &t->uport.state->xmit; fill_tx_fifo(t, t->tx_bytes); t->tx_in_progress = 0; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&t->uport); tegra_start_next_tx(t); return; } static void tegra_tx_dma_complete_callback(struct tegra_dma_req *req) { struct tegra_uart_port *t = req->dev; struct circ_buf *xmit = &t->uport.state->xmit; int count = req->bytes_transferred; unsigned long flags; dev_vdbg(t->uport.dev, "%s: %d\n", __func__, count); spin_lock_irqsave(&t->uport.lock, flags); xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); t->tx_in_progress = 0; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&t->uport); if (req->status != -TEGRA_DMA_REQ_ERROR_ABORTED) tegra_start_next_tx(t); spin_unlock_irqrestore(&t->uport.lock, flags); } static irqreturn_t tegra_uart_isr(int irq, void *data) { struct tegra_uart_port *t = data; struct uart_port *u = &t->uport; unsigned char iir; unsigned char ier; bool is_rx_int = false; unsigned long flags; spin_lock_irqsave(&u->lock, flags); t = container_of(u, struct tegra_uart_port, uport); while (1) { iir = uart_readb(t, UART_IIR); if (iir & UART_IIR_NO_INT) { if (likely(t->use_rx_dma) && is_rx_int) { do_handle_rx_dma(t); if (t->rx_in_progress) { ier = t->ier_shadow; ier |= (UART_IER_RLSI | UART_IER_RTOIE | UART_IER_EORD); t->ier_shadow = ier; uart_writeb(t, ier, UART_IER); } } spin_unlock_irqrestore(&u->lock, flags); return IRQ_HANDLED; } dev_dbg(u->dev, "tegra_uart_isr iir = 0x%x (%d)\n", iir, (iir >> 1) & 0x7); switch ((iir >> 1) & 0x7) { case 0: /* Modem signal change interrupt */ do_handle_modem_signal(u); break; case 1: /* Transmit interrupt only triggered when using PIO */ t->ier_shadow &= ~UART_IER_THRI; uart_writeb(t, t->ier_shadow, UART_IER); do_handle_tx_pio(t); break; case 4: /* End of data */ case 6: /* Rx timeout */ case 2: /* Receive */ if (likely(t->use_rx_dma)) { if (!is_rx_int) { is_rx_int = true; /* Disable interrups */ ier = t->ier_shadow; ier |= UART_IER_RDI; uart_writeb(t, ier, UART_IER); ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | UART_IER_EORD); t->ier_shadow = ier; uart_writeb(t, ier, UART_IER); } } else { do_handle_rx_pio(t); spin_unlock_irqrestore(&u->lock, flags); tty_flip_buffer_push(u->state->port.tty); spin_lock_irqsave(&u->lock, flags); } break; case 3: /* Receive error */ /* FIXME how to handle this? Why do we get here */ do_decode_rx_error(t, uart_readb(t, UART_LSR)); break; case 5: /* break nothing to handle */ case 7: /* break nothing to handle */ break; } } } static void tegra_stop_rx(struct uart_port *u) { struct tegra_uart_port *t; unsigned char ier; t = container_of(u, struct tegra_uart_port, uport); if (t->rts_active) set_rts(t, false); if (t->rx_in_progress) { ier = t->ier_shadow; ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE | UART_IER_EORD); t->ier_shadow = ier; uart_writeb(t, ier, UART_IER); t->rx_in_progress = 0; } if (t->use_rx_dma && t->rx_dma) { tegra_dma_dequeue(t->rx_dma); tty_flip_buffer_push(u->state->port.tty); } return; } static void tegra_uart_hw_deinit(struct tegra_uart_port *t) { unsigned char fcr; unsigned long flags; /* Disable interrupts */ uart_writeb(t, 0, UART_IER); while ((uart_readb(t, UART_LSR) & UART_LSR_TEMT) != UART_LSR_TEMT); udelay(200); spin_lock_irqsave(&t->uport.lock, flags); /* Reset the Rx and Tx FIFOs */ fcr = t->fcr_shadow; fcr |= UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR; uart_writeb(t, fcr, UART_FCR); udelay(200); clk_disable(t->clk); t->baud = 0; spin_unlock_irqrestore(&t->uport.lock, flags); } static void tegra_uart_free_rx_dma(struct tegra_uart_port *t) { if (!t->use_rx_dma) return; tegra_dma_free_channel(t->rx_dma); t->rx_dma = NULL; if (likely(t->rx_dma_req.dest_addr)) dma_free_coherent(t->uport.dev, t->rx_dma_req.size, t->rx_dma_req.virt_addr, t->rx_dma_req.dest_addr); t->rx_dma_req.dest_addr = 0; t->rx_dma_req.virt_addr = NULL; t->use_rx_dma = false; } static int tegra_uart_hw_init(struct tegra_uart_port *t) { unsigned char fcr; unsigned char ier; dev_vdbg(t->uport.dev, "+tegra_uart_hw_init\n"); t->fcr_shadow = 0; t->mcr_shadow = 0; t->lcr_shadow = 0; t->ier_shadow = 0; t->baud = 0; clk_enable(t->clk); /* Reset the UART controller to clear all previous status.*/ tegra_periph_reset_assert(t->clk); udelay(100); tegra_periph_reset_deassert(t->clk); udelay(100); t->rx_in_progress = 0; /* Reset the FIFO twice with some delay to make sure that the FIFOs are * really flushed. Wait is needed as the clearing needs to cross * multiple clock domains. * */ t->fcr_shadow = UART_FCR_ENABLE_FIFO; fcr = t->fcr_shadow; fcr |= UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR; uart_writeb(t, fcr, UART_FCR); udelay(100); uart_writeb(t, t->fcr_shadow, UART_FCR); udelay(100); /* Set the trigger level * * For PIO mode: * * For receive, this will interrupt the CPU after that many number of * bytes are received, for the remaining bytes the receive timeout * interrupt is received. * * Rx high watermark is set to 4. * * For transmit, if the trasnmit interrupt is enabled, this will * interrupt the CPU when the number of entries in the FIFO reaches the * low watermark. * * Tx low watermark is set to 8. * * For DMA mode: * * Set the Tx trigger to 4. This should match the DMA burst size that * programmed in the DMA registers. * */ t->fcr_shadow |= UART_FCR_R_TRIG_01; t->fcr_shadow |= TEGRA_UART_TX_TRIG_8B; uart_writeb(t, t->fcr_shadow, UART_FCR); if (t->use_rx_dma) { /* initialize the UART for a simple default configuration * so that the receive DMA buffer may be enqueued */ t->lcr_shadow = 3; /* no parity, stop, 8 data bits */ tegra_set_baudrate(t, 9600); t->fcr_shadow |= UART_FCR_DMA_SELECT; uart_writeb(t, t->fcr_shadow, UART_FCR); if (tegra_start_dma_rx(t)) { dev_err(t->uport.dev, "Rx DMA enqueue failed\n"); tegra_uart_free_rx_dma(t); t->fcr_shadow &= ~UART_FCR_DMA_SELECT; uart_writeb(t, t->fcr_shadow, UART_FCR); } } else uart_writeb(t, t->fcr_shadow, UART_FCR); t->rx_in_progress = 1; /* * Enable IE_RXS for the receive status interrupts like line errros. * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd. * * If using DMA mode, enable EORD instead of receive interrupt which * will interrupt after the UART is done with the receive instead of * the interrupt when the FIFO "threshold" is reached. * * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when * the DATA is sitting in the FIFO and couldn't be transferred to the * DMA as the DMA size alignment(4 bytes) is not met. EORD will be * triggered when there is a pause of the incomming data stream for 4 * characters long. * * For pauses in the data which is not aligned to 4 bytes, we get * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first * then the EORD. * * Don't get confused, believe in the magic of nvidia hw...:-) */ ier = 0; ier |= UART_IER_RLSI | UART_IER_RTOIE; if (t->use_rx_dma) ier |= UART_IER_EORD; else ier |= UART_IER_RDI; t->ier_shadow = ier; uart_writeb(t, ier, UART_IER); dev_vdbg(t->uport.dev, "-tegra_uart_hw_init\n"); return 0; } static int tegra_uart_init_rx_dma(struct tegra_uart_port *t) { dma_addr_t rx_dma_phys; void *rx_dma_virt; t->rx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_CONTINUOUS); if (!t->rx_dma) { dev_err(t->uport.dev, "%s: failed to allocate RX DMA.\n", __func__); return -ENODEV; } t->rx_dma_req.size = UART_RX_DMA_BUFFER_SIZE; rx_dma_virt = dma_alloc_coherent(t->uport.dev, t->rx_dma_req.size, &rx_dma_phys, GFP_KERNEL); if (!rx_dma_virt) { dev_err(t->uport.dev, "DMA buffers allocate failed\n"); goto fail; } t->rx_dma_req.dest_addr = rx_dma_phys; t->rx_dma_req.virt_addr = rx_dma_virt; t->rx_dma_req.source_addr = (unsigned long)t->uport.mapbase; t->rx_dma_req.source_wrap = 4; t->rx_dma_req.dest_wrap = 0; t->rx_dma_req.to_memory = 1; t->rx_dma_req.source_bus_width = 8; t->rx_dma_req.dest_bus_width = 32; t->rx_dma_req.req_sel = dma_req_sel[t->uport.line]; t->rx_dma_req.complete = tegra_rx_dma_complete_callback; t->rx_dma_req.threshold = tegra_rx_dma_threshold_callback; t->rx_dma_req.dev = t; return 0; fail: tegra_uart_free_rx_dma(t); return -ENODEV; } static int tegra_startup(struct uart_port *u) { struct tegra_uart_port *t = container_of(u, struct tegra_uart_port, uport); int ret = 0; t = container_of(u, struct tegra_uart_port, uport); sprintf(t->port_name, "tegra_uart_%d", u->line); t->use_tx_dma = false; if (!TX_FORCE_PIO) { t->tx_dma = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT); if (t->tx_dma) t->use_tx_dma = true; else pr_err("%s: failed to allocate TX DMA.\n", __func__); } if (t->use_tx_dma) { t->tx_dma_req.instance = u->line; t->tx_dma_req.complete = tegra_tx_dma_complete_callback; t->tx_dma_req.to_memory = 0; t->tx_dma_req.dest_addr = (unsigned long)t->uport.mapbase; t->tx_dma_req.dest_wrap = 4; t->tx_dma_req.source_wrap = 0; t->tx_dma_req.source_bus_width = 32; t->tx_dma_req.dest_bus_width = 8; t->tx_dma_req.req_sel = dma_req_sel[t->uport.line]; t->tx_dma_req.dev = t; t->tx_dma_req.size = 0; t->xmit_dma_addr = dma_map_single(t->uport.dev, t->uport.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); } t->tx_in_progress = 0; t->use_rx_dma = false; if (!RX_FORCE_PIO) { if (!tegra_uart_init_rx_dma(t)) t->use_rx_dma = true; } ret = tegra_uart_hw_init(t); if (ret) goto fail; dev_dbg(u->dev, "Requesting IRQ %d\n", u->irq); msleep(1); ret = request_irq(u->irq, tegra_uart_isr, IRQF_DISABLED, t->port_name, t); if (ret) { dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq); goto fail; } dev_dbg(u->dev,"Started UART port %d\n", u->line); return 0; fail: dev_err(u->dev, "Tegra UART startup failed\n"); return ret; } static void tegra_shutdown(struct uart_port *u) { struct tegra_uart_port *t; t = container_of(u, struct tegra_uart_port, uport); dev_vdbg(u->dev, "+tegra_shutdown\n"); tegra_uart_hw_deinit(t); t->rx_in_progress = 0; t->tx_in_progress = 0; tegra_uart_free_rx_dma(t); if (t->use_tx_dma) { tegra_dma_free_channel(t->tx_dma); t->tx_dma = NULL; t->use_tx_dma = false; dma_unmap_single(t->uport.dev, t->xmit_dma_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); t->xmit_dma_addr = 0; } free_irq(u->irq, t); dev_vdbg(u->dev, "-tegra_shutdown\n"); } static void tegra_wake_peer(struct uart_port *u) { struct tegra_uart_platform_data *pdata = u->dev->platform_data; if (pdata && pdata->wake_peer) pdata->wake_peer(u); } static unsigned int tegra_get_mctrl(struct uart_port *u) { /* RI - Ring detector is active * CD/DCD/CAR - Carrier detect is always active. For some reason * linux has different names for carrier detect. * DSR - Data Set ready is active as the hardware doesn't support it. * Don't know if the linux support this yet? * CTS - Clear to send. Always set to active, as the hardware handles * CTS automatically. * */ return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS; } static void set_rts(struct tegra_uart_port *t, bool active) { unsigned char mcr; mcr = t->mcr_shadow; if (active) mcr |= UART_MCR_RTS; else mcr &= ~UART_MCR_RTS; if (mcr != t->mcr_shadow) { uart_writeb(t, mcr, UART_MCR); t->mcr_shadow = mcr; } return; } static void set_dtr(struct tegra_uart_port *t, bool active) { unsigned char mcr; mcr = t->mcr_shadow; if (active) mcr |= UART_MCR_DTR; else mcr &= ~UART_MCR_DTR; if (mcr != t->mcr_shadow) { uart_writeb(t, mcr, UART_MCR); t->mcr_shadow = mcr; } return; } static void tegra_set_mctrl(struct uart_port *u, unsigned int mctrl) { unsigned char mcr; struct tegra_uart_port *t; dev_dbg(u->dev, "tegra_set_mctrl called with %d\n", mctrl); t = container_of(u, struct tegra_uart_port, uport); mcr = t->mcr_shadow; if (mctrl & TIOCM_RTS) { t->rts_active = true; set_rts(t, true); } else { t->rts_active = false; set_rts(t, false); } if (mctrl & TIOCM_DTR) set_dtr(t, true); else set_dtr(t, false); return; } static void tegra_break_ctl(struct uart_port *u, int break_ctl) { struct tegra_uart_port *t; unsigned char lcr; t = container_of(u, struct tegra_uart_port, uport); lcr = t->lcr_shadow; if (break_ctl) lcr |= UART_LCR_SBC; else lcr &= ~UART_LCR_SBC; uart_writeb(t, lcr, UART_LCR); t->lcr_shadow = lcr; } static int tegra_request_port(struct uart_port *u) { return 0; } static void tegra_release_port(struct uart_port *u) { } static unsigned int tegra_tx_empty(struct uart_port *u) { struct tegra_uart_port *t; unsigned int ret = 0; unsigned long flags; unsigned char lsr; t = container_of(u, struct tegra_uart_port, uport); dev_vdbg(u->dev, "+tegra_tx_empty\n"); spin_lock_irqsave(&u->lock, flags); if (!t->tx_in_progress) { lsr = uart_readb(t, UART_LSR); if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS) ret = TIOCSER_TEMT; } spin_unlock_irqrestore(&u->lock, flags); dev_vdbg(u->dev, "-tegra_tx_empty\n"); return ret; } static void tegra_stop_tx(struct uart_port *u) { struct tegra_uart_port *t; t = container_of(u, struct tegra_uart_port, uport); if (t->use_tx_dma) tegra_dma_dequeue_req(t->tx_dma, &t->tx_dma_req); return; } static void tegra_enable_ms(struct uart_port *u) { } #define UART_CLOCK_ACCURACY 5 static void tegra_set_baudrate(struct tegra_uart_port *t, unsigned int baud) { unsigned long rate; unsigned int divisor; unsigned char lcr; if (t->baud == baud) return; rate = clk_get_rate(t->clk); divisor = rate; do_div(divisor, 16); divisor += baud/2; do_div(divisor, baud); lcr = t->lcr_shadow; lcr |= UART_LCR_DLAB; uart_writeb(t, lcr, UART_LCR); uart_writel(t, divisor & 0xFF, UART_TX); uart_writel(t, ((divisor >> 8) & 0xFF), UART_IER); lcr &= ~UART_LCR_DLAB; uart_writeb(t, lcr, UART_LCR); t->baud = baud; dev_dbg(t->uport.dev, "Baud %u clock freq %lu and divisor of %u\n", baud, rate, divisor); } static void tegra_set_termios(struct uart_port *u, struct ktermios *termios, struct ktermios *oldtermios) { struct tegra_uart_port *t; unsigned int baud; unsigned long flags; unsigned int lcr; unsigned int c_cflag = termios->c_cflag; unsigned char mcr; t = container_of(u, struct tegra_uart_port, uport); dev_vdbg(t->uport.dev, "+tegra_set_termios\n"); spin_lock_irqsave(&u->lock, flags); /* Changing configuration, it is safe to stop any rx now */ if (t->rts_active) set_rts(t, false); /* Baud rate */ baud = uart_get_baud_rate(u, termios, oldtermios, 200, 4000000); tegra_set_baudrate(t, baud); /* Parity */ lcr = t->lcr_shadow; lcr &= ~UART_LCR_PARITY; if (PARENB == (c_cflag & PARENB)) { if (CMSPAR == (c_cflag & CMSPAR)) { /* FIXME What is space parity? */ /* data |= SPACE_PARITY; */ } else if (c_cflag & PARODD) { lcr |= UART_LCR_PARITY; lcr &= ~UART_LCR_EPAR; lcr &= ~UART_LCR_SPAR; } else { lcr |= UART_LCR_PARITY; lcr |= UART_LCR_EPAR; lcr &= ~UART_LCR_SPAR; } } lcr &= ~UART_LCR_WLEN8; switch (c_cflag & CSIZE) { case CS5: lcr |= UART_LCR_WLEN5; break; case CS6: lcr |= UART_LCR_WLEN6; break; case CS7: lcr |= UART_LCR_WLEN7; break; default: lcr |= UART_LCR_WLEN8; break; } /* Stop bits */ if (termios->c_cflag & CSTOPB) lcr |= UART_LCR_STOP; else lcr &= ~UART_LCR_STOP; uart_writeb(t, lcr, UART_LCR); t->lcr_shadow = lcr; /* Flow control */ if (termios->c_cflag & CRTSCTS) { mcr = t->mcr_shadow; mcr |= UART_MCR_CTS_EN; mcr &= ~UART_MCR_RTS_EN; t->mcr_shadow = mcr; uart_writeb(t, mcr, UART_MCR); t->use_cts_control = true; /* if top layer has asked to set rts active then do so here */ if (t->rts_active) set_rts(t, true); } else { mcr = t->mcr_shadow; mcr &= ~UART_MCR_CTS_EN; mcr &= ~UART_MCR_RTS_EN; t->mcr_shadow = mcr; uart_writeb(t, mcr, UART_MCR); t->use_cts_control = false; } /* update the port timeout based on new settings */ uart_update_timeout(u, termios->c_cflag, baud); spin_unlock_irqrestore(&u->lock, flags); dev_vdbg(t->uport.dev, "-tegra_set_termios\n"); return; } /* * Flush any TX data submitted for DMA. Called when the TX circular * buffer is reset. */ static void tegra_flush_buffer(struct uart_port *u) { struct tegra_uart_port *t; dev_vdbg(u->dev, "%s called", __func__); t = container_of(u, struct tegra_uart_port, uport); if (t->use_tx_dma) { tegra_dma_dequeue_req(t->tx_dma, &t->tx_dma_req); t->tx_dma_req.size = 0; } return; } static void tegra_pm(struct uart_port *u, unsigned int state, unsigned int oldstate) { } static const char *tegra_type(struct uart_port *u) { return 0; } static struct uart_ops tegra_uart_ops = { .tx_empty = tegra_tx_empty, .set_mctrl = tegra_set_mctrl, .get_mctrl = tegra_get_mctrl, .stop_tx = tegra_stop_tx, .start_tx = tegra_start_tx, .stop_rx = tegra_stop_rx, .flush_buffer = tegra_flush_buffer, .enable_ms = tegra_enable_ms, .break_ctl = tegra_break_ctl, .startup = tegra_startup, .shutdown = tegra_shutdown, .wake_peer = tegra_wake_peer, .set_termios = tegra_set_termios, .pm = tegra_pm, .type = tegra_type, .request_port = tegra_request_port, .release_port = tegra_release_port, }; static int tegra_uart_probe(struct platform_device *pdev); static int __devexit tegra_uart_remove(struct platform_device *pdev); static int tegra_uart_suspend(struct platform_device *pdev, pm_message_t state); static int tegra_uart_resume(struct platform_device *pdev); static struct platform_driver tegra_uart_platform_driver = { .remove = tegra_uart_remove, .probe = tegra_uart_probe, .suspend = tegra_uart_suspend, .resume = tegra_uart_resume, .driver = { .name = "tegra_uart" } }; static struct uart_driver tegra_uart_driver = { .owner = THIS_MODULE, .driver_name = "tegra_uart", .dev_name = "ttyHS", .cons = 0, .nr = 5, }; static int tegra_uart_suspend(struct platform_device *pdev, pm_message_t state) { struct tegra_uart_port *t = platform_get_drvdata(pdev); struct uart_port *u; if (pdev->id < 0 || pdev->id > tegra_uart_driver.nr) pr_err("Invalid Uart instance (%d)\n", pdev->id); u = &t->uport; uart_suspend_port(&tegra_uart_driver, u); return 0; } static int tegra_uart_resume(struct platform_device *pdev) { struct tegra_uart_port *t = platform_get_drvdata(pdev); struct uart_port *u; if (pdev->id < 0 || pdev->id > tegra_uart_driver.nr) pr_err("Invalid Uart instance (%d)\n", pdev->id); u = &t->uport; uart_resume_port(&tegra_uart_driver, u); return 0; } static int __devexit tegra_uart_remove(struct platform_device *pdev) { struct tegra_uart_port *t = platform_get_drvdata(pdev); struct uart_port *u; if (pdev->id < 0 || pdev->id > tegra_uart_driver.nr) pr_err("Invalid Uart instance (%d)\n", pdev->id); u = &t->uport; uart_remove_one_port(&tegra_uart_driver, u); platform_set_drvdata(pdev, NULL); pr_info("Unregistered UART port %s%d\n", tegra_uart_driver.dev_name, u->line); kfree(t); return 0; } static int tegra_uart_probe(struct platform_device *pdev) { struct tegra_uart_port *t; struct uart_port *u; struct resource *resource; int ret; char name[64]; if (pdev->id < 0 || pdev->id > tegra_uart_driver.nr) { pr_err("Invalid Uart instance (%d)\n", pdev->id); return -ENODEV; } t = kzalloc(sizeof(struct tegra_uart_port), GFP_KERNEL); if (!t) { pr_err("%s: Failed to allocate memory\n", __func__); return -ENOMEM; } u = &t->uport; u->dev = &pdev->dev; platform_set_drvdata(pdev, u); u->line = pdev->id; u->ops = &tegra_uart_ops; u->type = ~PORT_UNKNOWN; u->fifosize = 32; resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!resource)) return -ENXIO; u->mapbase = resource->start; u->membase = IO_ADDRESS(u->mapbase); if (unlikely(!u->membase)) return -ENOMEM; u->irq = platform_get_irq(pdev, 0); if (unlikely(u->irq < 0)) return -ENXIO; u->regshift = 2; t->clk = clk_get(&pdev->dev, NULL); if (!t->clk) { dev_err(&pdev->dev, "Couldn't get the clock\n"); goto fail; } ret = uart_add_one_port(&tegra_uart_driver, u); if (ret) { pr_err("%s: Failed(%d) to add uart port %s%d\n", __func__, ret, tegra_uart_driver.dev_name, u->line); kfree(t); platform_set_drvdata(pdev, NULL); return ret; } snprintf(name, sizeof(name), "tegra_hsuart_%d", u->line); pr_info("Registered UART port %s%d\n", tegra_uart_driver.dev_name, u->line); return ret; fail: kfree(t); return -ENODEV; } static int __init tegra_uart_init(void) { int ret; ret = uart_register_driver(&tegra_uart_driver); if (unlikely(ret)) { pr_err("Could not register %s driver\n", tegra_uart_driver.driver_name); return ret; } ret = platform_driver_register(&tegra_uart_platform_driver); if (unlikely(ret)) { pr_err("Could not register the UART platfrom " "driver\n"); uart_unregister_driver(&tegra_uart_driver); return ret; } pr_info("Initialized tegra uart driver\n"); return 0; } static void __exit tegra_uart_exit(void) { pr_info("Unloading tegra uart driver\n"); platform_driver_unregister(&tegra_uart_platform_driver); uart_unregister_driver(&tegra_uart_driver); } module_init(tegra_uart_init); module_exit(tegra_uart_exit); MODULE_DESCRIPTION("High speed UART driver for tegra chipset");