config SND_SOC_TEGRA
	tristate "SoC Audio for the Tegra System-on-Chip"
	depends on ARCH_TEGRA && TEGRA_SYSTEM_DMA
	depends on !TEGRA_LEGACY_AUDIO
	help
	  Say Y or M here if you want support for SoC audio on Tegra.

config SND_SOC_TEGRA20_DAS
	tristate "Tegra 20 Digital Audio Switch driver"
	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC

config SND_SOC_TEGRA20_I2S
	tristate "Tegra 20 I2S driver"
	depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
	select SND_SOC_TEGRA20_DAS
	help
	  Say Y or M if you want to add support for codecs attached to the
	  Tegra I2S interface. You will also need to select the individual
	  machine drivers to support below.

config SND_SOC_TEGRA30_AHUB
	tristate "Tegra 30 Audio Hub driver"
	depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC

config SND_SOC_TEGRA30_I2S
	tristate "Tegra 30 I2S driver"
	depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
	select SND_SOC_TEGRA30_AHUB
	help
	  Say Y or M if you want to add support for codecs attached to the
	  Tegra I2S interface. You will also need to select the individual
	  machine drivers to support below.

config SND_SOC_TEGRA_SPDIF
	tristate
	depends on SND_SOC_TEGRA
	default m
	help
	  Say Y or M if you want to add support for the SPDIF interface.
	  You will also need to select the individual machine drivers to support
	  below.

config MACH_HAS_SND_SOC_TEGRA_WM8903
	bool
	help
	  Machines that use the SND_SOC_TEGRA_WM8903 driver should select
	  this config option, in order to allow the user to enable
	  SND_SOC_TEGRA_WM8903.

config SND_SOC_TEGRA_WM8903
	tristate "SoC Audio support for Tegra boards using a WM8903 codec"
	depends on SND_SOC_TEGRA && I2C
	depends on MACH_HAS_SND_SOC_TEGRA_WM8903
	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
	select SND_SOC_WM8903
	help
	  Say Y or M here if you want to add support for SoC audio on Tegra
	  boards using the WM8093 codec. Currently, the supported boards are
	  Harmony, Ventana, Seaboard, Kaen, and Aebl.

config SND_SOC_TEGRA_TRIMSLICE
	tristate "SoC Audio support for TrimSlice board"
	depends on SND_SOC_TEGRA && MACH_TRIMSLICE && I2C
	select SND_SOC_TEGRA_I2S
	select SND_SOC_TLV320AIC23
	help
	  Say Y or M here if you want to add support for SoC audio on the
	  TrimSlice platform.

config MACH_HAS_SND_SOC_TEGRA_WM8753
	bool
	help
	  Machines that use the SND_SOC_TEGRA_WM8753 driver should select
	  this config option, in order to allow the user to enable
	  SND_SOC_TEGRA_WM8753.

config SND_SOC_TEGRA_WM8753
	tristate "SoC Audio support for Tegra boards using a WM8753 codec"
	depends on SND_SOC_TEGRA && I2C
	depends on MACH_HAS_SND_SOC_TEGRA_WM8753
	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
	select SND_SOC_WM8753
	help
	  Say Y or M here if you want to add support for SoC audio on Tegra
	  boards using the WM8753 codec. Currently, only supported board is
	  Whistler.

config MACH_HAS_SND_SOC_TEGRA_MAX98088
	bool
	help
	  Machines that use the SND_SOC_TEGRA_MAX98088 driver should select
	  this config option, in order to allow the user to enable
	  SND_SOC_TEGRA_MAX98088.

config SND_SOC_TEGRA_MAX98088
	tristate "SoC Audio support for Tegra boards using a MAX98088 codec"
	depends on SND_SOC_TEGRA && I2C
	depends on MACH_HAS_SND_SOC_TEGRA_MAX98088
	select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
	select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
	select SND_SOC_MAX98088
	help
	  Say Y or M here if you want to add support for SoC audio on Tegra
	  boards using the MAX98088 codec. Currently, only supported board is
	  Enterprise.