blob: 49c7d321e2bfbb7aae98d2c21c765911fa44b65c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
Device-Tree bindings for drivers/gpio/gpio-imx-rpmsg.c gpio driver over
rpmsg. On i.mx7ULP PTA PTB are connected on M4 side, so rpmsg gpio driver
needed to get/set gpio status from M4 side by rpmsg.
Required properties:
- compatible : Should be "fsl,imx-rpmsg-gpio".
- port_idx : Specify the GPIO PORT index, PTA:0, PTB:1.
- gpio-controller : Mark the device node as a gpio controller.
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify the gpio polarity:
0 = active high
1 = active low
Note: Each GPIO port should have an alias correctly numbered in "aliases"
node.
Examples:
aliases {
gpio4 = &rpmsg_gpio0;
gpio5 = &rpmsg_gpio1;
};
rpmsg_gpio0: rpmsg-gpio0 {
compatible = "fsl,imx-rpmsg-gpio";
port_idx = <0>;
gpio-controller;
#gpio-cells = <2>;
status = "okay";
};
rpmsg_gpio1: rpmsg-gpio1 {
compatible = "fsl,imx-rpmsg-gpio";
port_idx = <1>;
gpio-controller;
#gpio-cells = <2>;
status = "okay";
};
|
