blob: 877742a6f4087f72c818ee6dd819b436541a97f3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ovti,ov1063x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: OmniVision OV10633/OV1035 8/10 bit digital Camera Sensor
maintainers:
- Benoit Parrot <bparrot@ti.com>
- Sukrut Bellary <sbellary@baylibre.com>
<x1125864@ti.com>
description: |-
The OmniVision OV1063x is a 720p(HD) camera sensor which supports resolutions
up to 1280x800(WXGA) and 8/10-bit YUV output formats.
Each camera nodes should contain a 'port' child node with child
'endpoint' node. Please refer to the bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.yaml.
properties:
compatible:
enum:
- ovti,ov10633
- ovti,ov10635
reg:
maxItems: 1
clocks:
maxItems: 1
clock-names:
const: xvclk
reset-gpios:
maxItems: 1
description:
phandle to the GPIO connected to the RESETB pin, if any.
powerdown-gpios:
maxItems: 1
description:
phandle for the GPIO connected to the PWDN pin, if any.
port:
$ref: /schemas/graph.yaml#/$defs/port-base
additionalProperties: false
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
hsync-active: true
vsync-active: true
pclk-sample: true
bus-width:
enum: [ 8, 10 ]
required:
- compatible
- reg
- clocks
- clock-names
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
camera@30 {
compatible = "ovti,ov10635";
reg = <0x30>;
clocks = <&fixed_clock>;
clock-names = "xvclk";
reset-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
powerdown-gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;
port {
camera1: endpoint {
remote-endpoint = <&vin1a_ep>;
hsync-active = <1>;
vsync-active = <1>;
pclk-sample = <0>;
bus-width = <8>;
};
};
};
};
...
|