1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
|
/*
* Copyright 2014-2015 Toradex AG
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6dl.dtsi"
#include "imx6qdl-colibri.dtsi"
/* Add the following define if you connect a Fusion display with a capacitive
touch controller */
/* #define PCAP */
/ {
model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
compatible = "toradex,colibri_imx6dl-eval", "toradex,colibri_imx6dl", "fsl,imx6dl";
aliases {
i2c0 = &i2cddc;
i2c1 = &i2c2;
i2c2 = &i2c3;
};
aliases {
rtc0 = &rtc_i2c;
rtc1 = "/soc/aips-bus@02000000/snvs@020cc000/snvs-rtc-lp@34";
};
aliases {
/* the following, together with kernel patches, forces a fixed assignment
between device id and usdhc controller */
/* i.e. the eMMC on usdhc3 will be /dev/mmcblk0 */
mmc0 = &usdhc3; /* eMMC */
mmc1 = &usdhc1; /* MMC 4bit slot */
};
extcon_usbc_det: usbc_det {
compatible = "linux,extcon-usb-gpio";
debounce = <25>;
id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbc_det_1>;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
wakeup {
label = "Wake-Up";
gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
gpio-key,wakeup;
};
};
regulators {
reg_usb_host_vbus: usb_host_vbus {
status = "okay";
};
};
};
&backlight {
#if 0 /* PWM polarity: if 1 is brightest */
pwms = <&pwm3 0 5000000 0>;
#if 0 /* Fusion 7 needs 10kHz PWM frequency */
pwms = <&pwm3 0 100000 0>;
#endif
#else /* PWM polarity: if 0 is brightest */
pwms = <&pwm3 0 5000000 1>;
#endif
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
status = "okay";
};
/ {
clocks {
/* fixed crystal dedicated to mpc258x */
clk16m: clk@1 {
compatible = "fixed-clock";
reg=<1>;
#clock-cells = <0>;
clock-frequency = <16000000>;
clock-output-names = "clk16m";
};
};
};
/* Colibri SPI */
&ecspi4 {
status = "okay";
mcp258x0: mcp258x@1 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio3>;
interrupts = <27 0x2>;
spi-max-frequency = <10000000>;
status = "okay";
};
spidev0: spidev@1 {
compatible = "toradex,evalspi";
reg = <0>;
spi-max-frequency = <23000000>;
status = "disabled";
};
};
&hdmi_audio {
status = "okay";
};
&hdmi_core {
status = "okay";
};
&hdmi_video {
status = "okay";
};
/*
* I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier
* board)
*/
&i2c3 {
status = "okay";
/* Atmel maxtouch controller */
atmel_mxt_ts: atmel_mxt_ts@4a {
compatible = "atmel,maxtouch";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mxt_ts>;
reg = <0x4a>;
interrupt-parent = <&gpio2>;
interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
/*
* Note: When the status is set to okay, to avoid pinmux
* conflict, one should remove the pinctrl_weim_cs1 and
* pinctrl_weim_cs2 pingroup from the weim pinctrl-0
* property or disable weim node.
*/
status = "disabled";
};
#ifdef PCAP /* not standard pinout, disable PWM<B>, PWM<C> */
pcap@10 {
/* TouchRevolution Fusion 7 and 10 multi-touch controller */
compatible = "touchrevolution,fusion-f0710a";
reg = <0x10>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcap_1>;
gpios = <&gpio1 9 0 /* SODIMM 28, Pen down interrupt */
&gpio2 10 0 /* SODIMM 30, Reset */
>;
};
#endif
/* M41T0M6 real time clock on carrier board */
rtc_i2c: rtc@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
};
/*
* DDC_I2C: I2C2_SDA/SCL on extension connector pin 15/16
*/
&i2cddc {
status = "okay";
hdmi_ddc: edid@50 {
compatible = "fsl,imx6-hdmi-i2c";
reg = <0x50>;
};
};
&iomuxc {
/*
* Mux all pins which are unused to be GPIOs
* so they are ready for export to user space
*/
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
&pinctrl_csi_gpio_1
&pinctrl_gpio_1
&pinctrl_gpio_2
&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
gpio {
pinctrl_pcap_1: pcap-1 {
fsl,pins = <
MX6QDL_PAD_GPIO_9__GPIO1_IO09 PAD_CTRL_HYS_PD /* SODIMM 28 */
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 PAD_CTRL_HYS_PD /* SODIMM 30 */
>;
};
pinctrl_mxt_ts: mxt-ts {
fsl,pins = <
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 PAD_CTRL_HYS_PD /* SODIMM 107 */
MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 PAD_CTRL_HYS_PD /* SODIMM 106 */
>;
};
};
};
&lcd {
status = "okay";
};
&mxcfb1 {
status = "okay";
};
&mxcfb2 {
status = "okay";
};
#ifndef PCAP
&pwm1 {
status = "okay";
};
#endif
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
#ifndef PCAP
&pwm4 {
status = "okay";
};
#endif
&sound_hdmi {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
#if 0
linux,rs485-enabled-at-boot-time;
#endif
};
&uart3 {
status = "okay";
};
&usbh1 {
status = "okay";
};
&usbotg {
status = "okay";
extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
};
/* MMC */
&usdhc1 {
status = "okay";
};
&weim {
status = "okay";
fsl,weim-cs-gpr = <&gpr>;
/* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2, 32MB on CS3 */
ranges = <0 0 0x08000000 0x02000000
1 0 0x0a000000 0x02000000
2 0 0x0c000000 0x02000000
3 0 0x0e000000 0x02000000>;
/* SRAM on CS0 */
sram@0,0 {
compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
reg = <0 0 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
bank-width = <2>;
fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
0x00000000 0x04000040 0x00000000>;
};
/* SRAM on CS1 */
sram@1,0 {
compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
reg = <1 0 0x00010000>;
#address-cells = <1>;
#size-cells = <1>;
bank-width = <2>;
fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
0x00000000 0x04000040 0x00000000>;
};
};
|