1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
|
/*
* linux/arch/arm/mach-at91rm9200/board-csb337.c
*
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/hardware.h>
#include <asm/mach/serial_at91rm9200.h>
#include <asm/arch/board.h>
#include "generic.h"
static void __init csb337_init_irq(void)
{
/* Initialize AIC controller */
at91rm9200_init_irq(NULL);
/* Set up the GPIO interrupts */
at91_gpio_irq_setup(BGA_GPIO_BANKS);
}
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
#define CSB337_UART_MAP { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
#define CSB337_SERIAL_CONSOLE 0 /* ttyS0 */
static void __init csb337_map_io(void)
{
int serial[AT91_NR_UART] = CSB337_UART_MAP;
int i;
at91rm9200_map_io();
/* Initialize clocks: 3.6864 MHz crystal */
at91_clock_init(3686400);
/* Setup the LEDs */
at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
#ifdef CONFIG_SERIAL_AT91
at91_console_port = CSB337_SERIAL_CONSOLE;
memcpy(at91_serial_map, serial, sizeof(serial));
/* Register UARTs */
for (i = 0; i < AT91_NR_UART; i++) {
if (serial[i] >= 0)
at91_register_uart(i, serial[i]);
}
#endif
}
static struct at91_eth_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
};
static struct at91_usbh_data __initdata csb337_usbh_data = {
.ports = 2,
};
static struct at91_udc_data __initdata csb337_udc_data = {
// this has no VBUS sensing pin
.pullup_pin = AT91_PIN_PA24,
};
static struct at91_cf_data __initdata csb337_cf_data = {
/*
* connector P4 on the CSB 337 mates to
* connector P8 on the CSB 300CF
*/
/* CSB337 specific */
.det_pin = AT91_PIN_PC3,
/* CSB300CF specific */
.irq_pin = AT91_PIN_PA19,
.vcc_pin = AT91_PIN_PD0,
.rst_pin = AT91_PIN_PD2,
};
static struct at91_mmc_data __initdata csb337_mmc_data = {
.det_pin = AT91_PIN_PD5,
.is_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PD6,
};
static void __init csb337_board_init(void)
{
/* Ethernet */
at91_add_device_eth(&csb337_eth_data);
/* USB Host */
at91_add_device_usbh(&csb337_usbh_data);
/* USB Device */
at91_add_device_udc(&csb337_udc_data);
/* Compact Flash */
at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
at91_add_device_cf(&csb337_cf_data);
/* MMC */
at91_add_device_mmc(&csb337_mmc_data);
}
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = csb337_map_io,
.init_irq = csb337_init_irq,
.init_machine = csb337_board_init,
MACHINE_END
|
