path: root/arch/arm/mach-mx28/sleep.S

/*
 * Copyright (C) 2010 Freescale Semiconductor, Inc.
 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable-hwdef.h>
#include <mach/hardware.h>
#include <mach/regs-power.h>
#include <mach/regs-rtc.h>
#include "regs-pinctrl.h"
#include "regs-clkctrl.h"
#include "regs-dram.h"
#include "sleep.h"

#define BM_DRAM_CTL17_SREFRESH	0x00000001
#define HW_CLKCTRL_CPU_ADDR \
	(MX28_SOC_IO_ADDRESS(CLKCTRL_PHYS_ADDR) + HW_CLKCTRL_CPU)
#define HW_POWER_MINPWR_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_MINPWR)
#define HW_POWER_RESET_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_RESET)

#define HW_DRAM_CTL17_ADDR \
	(MX28_SOC_IO_ADDRESS(DRAM_PHYS_ADDR) + HW_DRAM_CTL17)
#define HW_DRAM_CTL22_ADDR \
	(MX28_SOC_IO_ADDRESS(DRAM_PHYS_ADDR) + HW_DRAM_CTL22)

#define HW_RTC_PERSISTENT0_ADDR \
	(MX28_SOC_IO_ADDRESS(RTC_PHYS_ADDR) + HW_RTC_PERSISTENT0)
#define HW_CLKCTRL_EMI_ADDR \
	(MX28_SOC_IO_ADDRESS(CLKCTRL_PHYS_ADDR) + HW_CLKCTRL_EMI)
#define HW_CLKCTRL_PLL0CTRL0_ADDR \
	(MX28_SOC_IO_ADDRESS(CLKCTRL_PHYS_ADDR) + HW_CLKCTRL_PLL0CTRL0)
#define HW_POWER_VDDIOCTRL_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_VDDIOCTRL)
#define HW_POWER_VDDDCTRL_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_VDDDCTRL)
#define HW_POWER_VDDACTRL_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_VDDACTRL)
#define HW_PINCTRL_EMI_DS_CTRL_ADDR \
	(MX28_SOC_IO_ADDRESS(PINCTRL_PHYS_ADDR) + HW_PINCTRL_EMI_DS_CTRL)

#define HW_POWER_LOOPCTRL_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_LOOPCTRL)

#define HW_POWER_MINPWR_ADDR \
	(MX28_SOC_IO_ADDRESS(POWER_PHYS_ADDR) + HW_POWER_MINPWR)

#define PHYS_RAM_START		0x40000000

#define LOWER_VDDIO 6
#define LOWER_VDDA 9
#define LOWER_VDDD 0x16

#define VDDIOCTRL_BACKUP 0
#define VDDACTRL_BACKUP 1
#define VDDDCTRL_BACKUP 2
#define POWER_LOOPCTRL_BACKUP 3
#define POWER_MINPWR_BACKUP 4

.macro PM_BITS_SET, addr, val
	mov	r0, #(\addr & 0x000000FF)
	orr	r0, r0, #(\addr & 0x0000FF00)
	orr	r0, r0, #(\addr & 0x00FF0000)
	orr	r0, r0, #(\addr & 0xFF000000)
	ldr	r1, [r0]
	orr	r1, r1, #(\val)
	str r1, [r0]
.endm

.macro PM_BITS_CLR, addr, val
	mov	r0, #(\addr & 0x000000FF)
	orr	r0, r0, #(\addr & 0x0000FF00)
	orr	r0, r0, #(\addr & 0x00FF0000)
	orr	r0, r0, #(\addr & 0xFF000000)
	ldr	r1, [r0]
	bic	r1, r1, #(\val)
	str r1, [r0]
.endm

.macro PM_BACKUP_REG, addr, num
	mov	r0, #(\addr & 0x000000FF)
	orr	r0, r0, #(\addr & 0x0000FF00)
	orr	r0, r0, #(\addr & 0x00FF0000)
	orr	r0, r0, #(\addr & 0xFF000000)
	ldr	r1, [r0]
	str r1, __mx28_temp_stack + \num * 4
.endm

.macro PM_WRITE_REG_MASK, addr, bitmask, val
	mov	r0, #(\addr & 0x000000FF)
	orr	r0, r0, #(\addr & 0x0000FF00)
	orr	r0, r0, #(\addr & 0x00FF0000)
	orr	r0, r0, #(\addr & 0xFF000000)
	ldr	r1, [r0]
	bic r1, r1, #(\bitmask)
	orr r1, r1, #(\val)
	str r1, [r0]
.endm

.macro PM_SET_AND_BACKUP_REG, addr, bitmask, val, num
	mov	r0, #(\addr & 0x000000FF)
	orr	r0, r0, #(\addr & 0x0000FF00)
	orr	r0, r0, #(\addr & 0x00FF0000)
	orr	r0, r0, #(\addr & 0xFF000000)
	ldr	r1, [r0]
	str r1, __mx28_temp_stack + \num * 4
	bic r1, r1, #(\bitmask)
	orr r1, r1, #(\val)
	str r1, [r0]
.endm

.macro PM_SET_RESTORE_REG, addr, num
	mov	r0, #(\addr & 0x000000FF)
	orr	r0, r0, #(\addr & 0x0000FF00)
	orr	r0, r0, #(\addr & 0x00FF0000)
	orr	r0, r0, #(\addr & 0xFF000000)
	ldr r1, __mx28_temp_stack + \num * 4
	str r1, [r0]
.endm


.global cpu_arm926_switch_mm

		.text

.align 8
ENTRY(mx28_cpu_standby)
	@ save registers on stack
	stmfd	sp!, {r0 - r9, lr}

	adr	r9, __mx28_temp_stack

	@ clean cache
	ldr	r1, __mx28_flush_cache_addr
	mov	lr, pc
	mov	pc, r1
	@ put DRAM into self refresh
	mov	r0, #(HW_DRAM_CTL17_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0xFF000000)
	ldr	r1, [r0]
	orr	r1, r1, #(BM_DRAM_CTL17_SREFRESH)
	str	r1, [r0]
	@ wait for it to actually happen
	mov	r0, #24 << 5
11:	sub	r0, r0, #1
	cmp	r0, #0
	bne	11b

	@ gate clk
	mov	r0, #(HW_CLKCTRL_EMI_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_CLKCTRL_EMI_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_CLKCTRL_EMI_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_CLKCTRL_EMI_ADDR & 0xFF000000)
	ldr	r1, [r0]
	orr	r1, r1, #(BM_CLKCTRL_EMI_CLKGATE)
	str	r1, [r0]

//	PM_SET_AND_BACKUP_REG HW_PINCTRL_EMI_DS_CTRL_ADDR,\
//	BM_PINCTRL_EMI_DS_CTRL_DDR_MODE,\
//	BF_PINCTRL_EMI_DS_CTRL_DDR_MODE(0x1), 4

	// vddio
	PM_SET_AND_BACKUP_REG HW_POWER_VDDIOCTRL_ADDR,\
	BM_POWER_VDDIOCTRL_TRG, LOWER_VDDIO, VDDIOCTRL_BACKUP
	mov	r0, #24 << 10
1:	sub	r0, r0, #1
	cmp	r0, #0
	bne	1b

	PM_SET_AND_BACKUP_REG HW_POWER_VDDACTRL_ADDR,\
	BM_POWER_VDDACTRL_TRG, LOWER_VDDA, VDDACTRL_BACKUP
	mov	r0, #24 << 10
2:	sub	r0, r0, #1
	cmp	r0, #0
	bne	2b

	PM_SET_AND_BACKUP_REG HW_POWER_VDDDCTRL_ADDR,\
	BM_POWER_VDDDCTRL_TRG, LOWER_VDDD, VDDDCTRL_BACKUP
	mov	r0, #24 << 10
3:	sub	r0, r0, #1
	cmp	r0, #0
	bne	3b

	PM_BACKUP_REG HW_POWER_LOOPCTRL_ADDR, POWER_LOOPCTRL_BACKUP
	PM_BACKUP_REG HW_POWER_MINPWR_ADDR, POWER_MINPWR_BACKUP

//	PM_BITS_CLR	HW_POWER_LOOPCTRL_ADDR, BM_POWER_LOOPCTRL_EN_RCSCALE
//	PM_WRITE_REG_MASK	HW_POWER_LOOPCTRL_ADDR, BM_POWER_LOOPCTRL_DC_R,\
//		(2<<BP_POWER_LOOPCTRL_DC_R)

	// half fets
	PM_BITS_SET HW_POWER_MINPWR_ADDR, BM_POWER_MINPWR_HALF_FETS

	PM_BITS_CLR	HW_POWER_LOOPCTRL_ADDR, BM_POWER_LOOPCTRL_CM_HYST_THRESH
	PM_BITS_CLR	HW_POWER_LOOPCTRL_ADDR, BM_POWER_LOOPCTRL_EN_CM_HYST
	PM_BITS_CLR	HW_POWER_LOOPCTRL_ADDR, BM_POWER_LOOPCTRL_EN_DF_HYST

	// enable PFM
	PM_BITS_SET	HW_POWER_LOOPCTRL_ADDR, BM_POWER_LOOPCTRL_HYST_SIGN
	PM_BITS_SET HW_POWER_MINPWR_ADDR, BM_POWER_MINPWR_EN_DC_PFM


    //Gated PLL0
	PM_BITS_CLR	HW_CLKCTRL_PLL0CTRL0_ADDR, BM_CLKCTRL_PLL0CTRL0_POWER

	@ do enter standby
	mov	r0, #(HW_CLKCTRL_CPU_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_CLKCTRL_CPU_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_CLKCTRL_CPU_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_CLKCTRL_CPU_ADDR & 0xFF000000)
	mov	r1, #(1<<12)
	str	r1, [r0, #4]
	mov	r2, #0
	mcr	p15, 0, r2, c7, c0, 4
	nop

	@ sleeping now...

	@ remove INTERRUPT_WAIT bit
	str	r1, [r0, #8]
	nop
	nop
	nop

	PM_BITS_SET	HW_CLKCTRL_PLL0CTRL0_ADDR, BM_CLKCTRL_PLL0CTRL0_POWER

	PM_SET_RESTORE_REG HW_POWER_MINPWR_ADDR, POWER_MINPWR_BACKUP

	PM_SET_RESTORE_REG HW_POWER_LOOPCTRL_ADDR, POWER_LOOPCTRL_BACKUP

	// vddio
	PM_SET_RESTORE_REG HW_POWER_VDDIOCTRL_ADDR, VDDIOCTRL_BACKUP
	mov	r0, #24 << 10
10:	sub	r0, r0, #1
	cmp	r0, #0
	bne	10b
	PM_SET_RESTORE_REG HW_POWER_VDDACTRL_ADDR, VDDACTRL_BACKUP
	mov	r0, #24 << 10
20:	sub	r0, r0, #1
	cmp	r0, #0
	bne	20b
	PM_SET_RESTORE_REG HW_POWER_VDDDCTRL_ADDR, VDDDCTRL_BACKUP
	mov	r0, #24 << 10
30:	sub	r0, r0, #1
	cmp	r0, #0
	bne	30b

	@ ungate clk
	mov	r0, #(HW_CLKCTRL_EMI_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_CLKCTRL_EMI_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_CLKCTRL_EMI_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_CLKCTRL_EMI_ADDR & 0xFF000000)
	ldr	r1, [r0]
	bic	r1, r1, #(BM_CLKCTRL_EMI_CLKGATE)
	str	r1, [r0]

//	PM_SET_RESTORE_REG HW_PINCTRL_EMI_DS_CTRL_ADDR, 4
	@ restore normal DRAM mode
	mov	r0, #(HW_DRAM_CTL17_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0xFF000000)
	ldr	r1, [r0]
	bic	r1, r1, #BM_DRAM_CTL17_SREFRESH
	str	r1, [r0]
	@ wait for it to actually happen
	mov	r0, #24 << 5
12:	sub	r0, r0, #1
	cmp	r0, #0
	bne	12b

	nop
	nop
	nop

	@ restore regs and return
	ldmfd   sp!, {r0 - r9, pc}

	.space	0x100
__mx28_temp_stack:
	.space	128

#ifdef CONFIG_STMP378X_RAM_FREQ_SCALING
#include "emi.inc"
#endif

__mx28_flush_cache_addr:
	.word	arm926_flush_kern_cache_all

ENTRY(mx28_standby_alloc_sz)
	.word	. - mx28_cpu_standby

ENTRY(mx28_cpu_suspend)
	@ save registers on stack
	stmfd	sp!, {r1 - r12, lr}

	@ save context
	mov	r0, #0xd3	@ SVC, Interrupts disabled
	msr	cpsr, r0
	mov	r1, #0xC0000000
	ldr	r1, [r1]
	mrc	p15, 0, r0, c1, c0, 0
	str	r0, [r1, #MMUCTL_OFFS]
	mrc	p15, 0, r0, c15, c1, 0
	str	r0, [r1, #MMUCPACCESS_OFS]
	mrc	p15, 0, r0, c2, c0, 0
	str	r0, [r1, #MMUTTB_OFFS]
	mrc	p15, 0, r0, c3, c0, 0
	str	r0, [r1, #MMUDOMAIN_OFFS]
	mrc	p15, 0, r0, c13, c0, 0
	str	r0, [r1, #MMUPID_OFFS]

	str	sp, [r1, #SVC_SP_OFFS]
	mrs	r0, spsr
	str	r0, [r1, #SVC_SPSR_OFFS]

	add	r2, r1, #FIQ_SPSR_OFFS
	mov	r0, #0xd1	@ FIQ, Interrupts disabled
	msr	cpsr, r0
	mrs	r3, spsr
	stmia	r2!, {r3, r8-r12, sp, lr}

	add	r2, r1, #ABT_SPSR_OFFS
	mov	r0, #0xd7	@ ABT, Interrupts disabled
	msr	cpsr, r0
	mrs	r3, spsr
	stmia	r2!, {r3, sp, lr}

	add	r2, r1, #IRQ_SPSR_OFFS
	mov	r0, #0xd2	@ IRQ, Interrupts disabled
	msr	cpsr, r0
	mrs	r3, spsr
	stmia	r2!, {r3, sp, lr}

	add	r2, r1, #UND_SPSR_OFFS
	mov	r0, #0xdb	@ UND, Interrupts disabled
	msr	cpsr, r0
	mrs	r3, spsr
	stmia	r2!, {r3, sp, lr}

	add	r2, r1, #SYS_SP_OFFS
	mov	r0, #0xdf	@ SYS, Interrupts disabled
	msr	cpsr, r0
	stmia	r2!, {sp, lr}

	add	r2, r1, #SVC_R8_OFFS
	mov	r0, #0xd3	@ Back to SVC, Interrupts disabled
	msr	cpsr, r0

	@ save entry point
	sub	r1, r1, #(0xC0000000 - PHYS_RAM_START)
	mov	r0, #0xC0000000
	str	r1, [r0]
	ldr	r1, __mx28_resume_point
	sub	r1, r1, #(0xC0000000 - PHYS_RAM_START)
	str	r1, [r0, #4]
	mov	r0, #0

	@ clean cache
	ldr	r1, __mx28_flush_cache_addr2
	mov	lr, pc
	mov	pc, r1

	@ enable internal xtal
	mov	r2, #(HW_POWER_MINPWR_ADDR & 0x000000FF)
	orr	r2, r2, #(HW_POWER_MINPWR_ADDR & 0x0000FF00)
	orr	r2, r2, #(HW_POWER_MINPWR_ADDR & 0x00FF0000)
	orr	r2, r2, #(HW_POWER_MINPWR_ADDR & 0xFF000000)
	ldr	r1, [r2]
	orr	r1, r1, #(1<<9)
	str	r1, [r2]
	orr	r1, r1, #(1<<8)
	str	r1, [r2]

	@ enable RTC/RAM clocks
	mov	r0, #(HW_RTC_PERSISTENT0_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_RTC_PERSISTENT0_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_RTC_PERSISTENT0_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_RTC_PERSISTENT0_ADDR & 0xFF000000)
	mov	r1, #((1<<4)|(1<<5)|1)
	str	r1, [r0, #4]

	@ put DRAM into self refresh
	mov	r0, #(HW_DRAM_CTL17_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0xFF000000)
	ldr	r1, [r0]
	orr	r1, r1, #(BM_DRAM_CTL17_SREFRESH)
	str	r1, [r0]

	@ wait for it to actually happen
	nop
	nop
	nop
	nop
	nop
	nop

	@ power off RAM
	mov	r0, #(HW_DRAM_CTL17_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_DRAM_CTL17_ADDR & 0xFF000000)
	ldr	r1, [r0]
	orr	r1, r1, #(1<<24)
	str	r1, [r0]
	nop
	nop
	nop
	nop

	@ do enter sleep
	mov	r0, #(HW_POWER_RESET_ADDR & 0x000000FF)
	orr	r0, r0, #(HW_POWER_RESET_ADDR & 0x0000FF00)
	orr	r0, r0, #(HW_POWER_RESET_ADDR & 0x00FF0000)
	orr	r0, r0, #(HW_POWER_RESET_ADDR & 0xFF000000)
	mov	r1, #0xFF000000
	orr	r1, r1, #0x00FF0000
	str	r1, [r0, #8]
	mov	r1, #0x3E000000
	orr	r1, r1, #0x00770000
	str	r1, [r0, #4]
	mov	r1, #2
	str	r1, [r0, #8]
	mov	r1, #1
	str	r1, [r0, #4]
	nop
	nop
	nop
	nop
	nop
	nop

	@ sleeping now...

__restore_context:
	mov	r0, #0
	mcr	p15, 0, r0, c7, c10, 4	@ Drain write buffer
	mcr	p15, 0, r0, c8, c7, 0	@ Invalidate TLBs
	mcr	p15, 0, r0, c7, c7, 0	@ Invalidate I & D cache
	nop
	nop

	mov	r0, #0xd3
	msr	cpsr, r0

	bl	__create_temp_page_tables
	mov	r3, r4

	mov	r1, #PHYS_RAM_START
	ldr	r1, [r1]
	ldr	r2, [r1, #MMUDOMAIN_OFFS]
	ldr	r4, [r1, #MMUCPACCESS_OFS]
	ldr	r5, [r1, #MMUPID_OFFS]
	ldr	r6, =__resume_after_mmu
	ldr	r7, [r1, #MMUCTL_OFFS]
	ldr	r8, [r1, #MMUTTB_OFFS]
	add	r1, r1, #(0xC0000000 - PHYS_RAM_START)
	mov	r0, #0
@	mcr	p15, 0, r4, c15, c1, 0	@ cpaccess
	mcr	p15, 0, r5, c13, c0, 0	@ pid
	mcr	p15, 0, r2, c3, c0, 0	@ domain
	mcr	p15, 0, r3, c2, c0, 0	@ ttb
	b	1f
	.align 5
1:	mov	r0, r0
	mcr     p15, 0, r7, c1, c0, 0	@ mmuctl
	nop
	mrc	p15, 0, r0, c3, c0, 0	@ read id
	mov	r0, r0
	mov	r0, r0
	sub	pc, r6, r5, lsr #32
	nop
	nop
	nop
__resume_after_mmu:
	mov	r0, #0
	mcr	p15, 0, r0, c8, c7, 0	@ Invalidate TLBs
	mcr	p15, 0, r0, c7, c7, 0	@ Invalidate I & D cache

	mov	r0, r8
	bl	cpu_arm926_switch_mm

	mov	r0, #0xd1 @FIQ, Interrupts disabled
	ldr	r2, [r1, #FIQ_SPSR_OFFS]
	add	r3, r1, #FIQ_R8_OFFS
	msr	cpsr, r0
	msr	spsr, r2
	ldmia	r3!, {r8-r12, sp, lr}

	mov	r0, #0xd7 @ABT, Interrupts disabled
	ldr	r2, [r1, #ABT_SPSR_OFFS]
	add	r3, r1, #ABT_SP_OFFS
	msr	cpsr, r0
	msr	spsr, r2
	ldmia	r3!, {sp, lr}

	mov	r0, #0xd2 @IRQ, Interrupts disabled
	ldr	r2, [r1, #IRQ_SPSR_OFFS]
	add	r3, r1, #IRQ_SP_OFFS
	msr	cpsr, r0
	msr	spsr, r2
	ldmia	r3!, {sp, lr}

	mov	r0, #0xdb @UND, Interrupts disabled
	ldr	r2, [r1, #UND_SPSR_OFFS]
	add	r3, r1, #UND_SP_OFFS
	msr	cpsr, r0
	msr	spsr, r2
	ldmia	r3!, {sp, lr}

	mov	r0, #0xdf @SYS, Interrupts disabled
	add	r3, r1, #SYS_SP_OFFS
	msr	cpsr, r0
	ldmia	r3!, {sp, lr}

	mov	r0, #0xd3 @SVC, interrupts disabled
	ldr	r2, [r1, #SVC_SPSR_OFFS]
	ldr	r3, [r1, #SVC_SP_OFFS]
	msr	cpsr, r0
	msr	spsr, r2
	mov	sp, r3

#if 0
	@ select CPU bypass, will be cleared afterwards
	ldr	r0, =HW_CLKCTRL_CLKSEQ_ADDR
	ldr	r2, =HW_CLKCTRL_HBUS_ADDR
	ldr	r4, =HW_CLKCTRL_CPU_ADDR
	mov	r1, #(1<<7)
	ldr	r3, [r2]
	bic	r3, r3, #BM_CLKCTRL_HBUS_DIV
	orr	r3, r3, #1
	ldr	r5, [r4]
	bic	r5, r5, #BM_CLKCTRL_CPU_DIV_CPU
	orr	r5, r5, #1
	str	r1, [r0, #4]
	str	r3, [r2]
	str	r5, [r4]
#endif
	@ restore regs and return
	ldmfd   sp!, {r1 - r12, lr}
	mov	pc, lr

__mx28_flush_cache_addr2:
	.word	arm926_flush_kern_cache_all
__mx28_resume_point:
	.word	__restore_context
ENTRY(mx28_s2ram_alloc_sz)
	.word	. - mx28_cpu_suspend

__create_temp_page_tables:
	ldr	r4, =(__temp_ttb - 0xC0000000 + PHYS_RAM_START)

	/*
	 * Clear the 16K level 1 swapper page table
	 */
	mov	r0, r4
	mov	r3, #0
	add	r6, r0, #0x4000
1:	str	r3, [r0], #4
	str	r3, [r0], #4
	str	r3, [r0], #4
	str	r3, [r0], #4
	teq	r0, r6
	bne	1b

	/*
	 * Create identity mapping for the area close to where we are to
	 * cater for the MMU enable.
	 */
	mov	r6, pc, lsr #20			@ kind of where we are
	ldr	r7, =\
	(PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE\
	| PMD_BIT4 | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ)

	orr	r3, r7, r6, lsl #20		@ flags + kernel base
	str	r3, [r4, r6, lsl #2]		@ identity mapping

	mov	r6, r6, lsl #20
	add	r6, r6, #(0xC0000000-PHYS_RAM_START)
	str	r3, [r4, r6, lsr #18]

	mov	pc, lr
	.ltorg

	.section ".sdata", "a"
	.align 14
__temp_ttb:
	.space 0x8000