path: root/arch/arm/mach-mx5/pm.c

/*
 *  Copyright (C) 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved.
 */

/*
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/suspend.h>
#include <linux/regulator/machine.h>
#include <linux/proc_fs.h>
#include <linux/cpufreq.h>
#include <linux/iram_alloc.h>
#include <linux/fsl_devices.h>
#include <linux/mfd/da9052/da9052.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/tlb.h>
#include <asm/delay.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>

#define MXC_SRPG_EMPGC0_SRPGCR	(IO_ADDRESS(GPC_BASE_ADDR) + 0x2C0)
#define MXC_SRPG_EMPGC1_SRPGCR	(IO_ADDRESS(GPC_BASE_ADDR) + 0x2D0)
#define DATABAHN_CTL_REG0	0
#define DATABAHN_CTL_REG19	0x4c
#define DATABAHN_CTL_REG79	0x13c
#define DATABAHN_PHY_REG25	0x264
#define MX53_OFFSET 0x20000000

static struct cpu_wp *cpu_wp_tbl;
static int cpu_wp_nr;
static struct clk *cpu_clk;
static struct mxc_pm_platform_data *pm_data;

#if defined(CONFIG_CPU_FREQ)
static int org_freq;
extern int cpufreq_suspended;
extern int set_cpu_freq(int wp);
#endif


static struct device *pm_dev;
struct clk *gpc_dvfs_clk;
extern void cpu_do_suspend_workaround(u32 sdclk_iomux_addr);
extern void mx50_suspend(u32 databahn_addr);
extern struct cpu_wp *(*get_cpu_wp)(int *wp);
extern void __iomem *databahn_base;
extern void da9053_suspend_cmd_hw(void);
extern int da9053_restore_volt_settings(void);
extern void da9053_suspend_cmd_sw(void);
extern void da9053_resume_dump(void);
extern void pm_da9053_i2c_init(u32 base_addr);

extern int iram_ready;
void *suspend_iram_base;
void (*suspend_in_iram)(void *param1) = NULL;
void __iomem *suspend_param1;

#define TZIC_WAKEUP0_OFFSET            0x0E00
#define TZIC_WAKEUP1_OFFSET            0x0E04
#define TZIC_WAKEUP2_OFFSET            0x0E08
#define TZIC_WAKEUP3_OFFSET            0x0E0C
#define GPIO7_0_11_IRQ_BIT			   (0x1<<11)

static void mx53_smd_loco_irq_wake_fixup(void)
{
	void __iomem *tzic_base;
	tzic_base = ioremap(MX53_TZIC_BASE_ADDR, SZ_4K);
	if (NULL == tzic_base) {
		pr_err("fail to map MX53_TZIC_BASE_ADDR\n");
		return;
	}
	__raw_writel(0, tzic_base + TZIC_WAKEUP0_OFFSET);
	__raw_writel(0, tzic_base + TZIC_WAKEUP1_OFFSET);
	__raw_writel(0, tzic_base + TZIC_WAKEUP2_OFFSET);
	/* only enable irq wakeup for da9053 */
	__raw_writel(GPIO7_0_11_IRQ_BIT, tzic_base + TZIC_WAKEUP3_OFFSET);
	iounmap(tzic_base);
	pr_info("only da9053 irq is wakeup-enabled\n");
}

static int mx5_suspend_enter(suspend_state_t state)
{
	if (gpc_dvfs_clk == NULL)
		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs_clk");
	/* gpc clock is needed for SRPG */
	clk_enable(gpc_dvfs_clk);
	switch (state) {
	case PM_SUSPEND_MEM:
		mxc_cpu_lp_set(STOP_POWER_OFF);
		break;
	case PM_SUSPEND_STANDBY:
		mxc_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
		break;
	default:
		return -EINVAL;
	}

	if (tzic_enable_wake(0) != 0)
		return -EAGAIN;

	if (state == PM_SUSPEND_MEM) {
		local_flush_tlb_all();
		flush_cache_all();

		if (cpu_is_mx51() || cpu_is_mx53()) {
			if (machine_is_mx53_smd() ||
				(machine_is_mx53_loco() &&
				(!board_is_mx53_loco_mc34708()))) {
				if (board_is_rev(BOARD_REV_4) ||
					machine_is_mx53_loco()) {
					mx53_smd_loco_irq_wake_fixup();
					da9053_suspend_cmd_sw();
				} else {
				/*  for new OTP DA9053 board,
					enable other irq for wakeup,
					otherwise disable other wakeup sources.
				*/
					if (da9053_get_chip_version() !=
						DA9053_VERSION_BB)
						mx53_smd_loco_irq_wake_fixup();

					da9053_suspend_cmd_hw();
				}
			}
			/* Run the suspend code from iRAM. */
			suspend_in_iram(suspend_param1);
			if (machine_is_mx53_smd() ||
				(machine_is_mx53_loco() &&
				(!board_is_mx53_loco_mc34708())))
				if (da9053_get_chip_version())
					da9053_restore_volt_settings();
			/*clear the EMPGC0/1 bits */
			__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
			__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
		} else {
			if (cpu_is_mx50()) {
				if (pm_data->suspend_enter)
					pm_data->suspend_enter();

				/* Suspend now. */
				suspend_in_iram(databahn_base);

				if (pm_data->suspend_exit)
					pm_data->suspend_exit();
			}
		}
	} else {
			cpu_do_idle();
	}
	clk_disable(gpc_dvfs_clk);

	return 0;
}


/*
 * Called after processes are frozen, but before we shut down devices.
 */
static int mx5_suspend_prepare(void)
{
#if defined(CONFIG_CPU_FREQ)
#define MX53_SUSPEND_CPU_WP 400000000
	struct cpufreq_freqs freqs;
	u32 suspend_wp = 0;
	org_freq = clk_get_rate(cpu_clk);
	/* workaround for mx53 to suspend on 400MHZ wp */
	if (cpu_is_mx53())
		for (suspend_wp = 0; suspend_wp < cpu_wp_nr; suspend_wp++)
			if (cpu_wp_tbl[suspend_wp].cpu_rate
				== MX53_SUSPEND_CPU_WP)
				break;
	if (suspend_wp == cpu_wp_nr)
		suspend_wp = 0;
	pr_info("suspend wp cpu=%d\n", cpu_wp_tbl[suspend_wp].cpu_rate);
	freqs.old = org_freq / 1000;
	freqs.new = cpu_wp_tbl[suspend_wp].cpu_rate / 1000;
	freqs.cpu = 0;
	freqs.flags = 0;

	cpufreq_suspended = 1;
	if (clk_get_rate(cpu_clk) != cpu_wp_tbl[suspend_wp].cpu_rate) {
		set_cpu_freq(cpu_wp_tbl[suspend_wp].cpu_rate);
		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
	}
#endif
	return 0;
}

/*
 * Called before devices are re-setup.
 */
static void mx5_suspend_finish(void)
{
#if defined(CONFIG_CPU_FREQ)
	struct cpufreq_freqs freqs;

	freqs.old = clk_get_rate(cpu_clk) / 1000;
	freqs.new = org_freq / 1000;
	freqs.cpu = 0;
	freqs.flags = 0;

	cpufreq_suspended = 0;

	if (org_freq != clk_get_rate(cpu_clk)) {
		set_cpu_freq(org_freq);
		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
	}
#endif
}

/*
 * Called after devices are re-setup, but before processes are thawed.
 */
static void mx5_suspend_end(void)
{
}

static int mx5_pm_valid(suspend_state_t state)
{
	return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
}

struct platform_suspend_ops mx5_suspend_ops = {
	.valid = mx5_pm_valid,
	.prepare = mx5_suspend_prepare,
	.enter = mx5_suspend_enter,
	.finish = mx5_suspend_finish,
	.end = mx5_suspend_end,
};

static int __devinit mx5_pm_probe(struct platform_device *pdev)
{
	pm_dev = &pdev->dev;
	pm_data = pdev->dev.platform_data;

	return 0;
}

static struct platform_driver mx5_pm_driver = {
	.driver = {
		   .name = "mx5_pm",
		   },
	.probe = mx5_pm_probe,
};

#define SUSPEND_ID_MX51 1
#define SUSPEND_ID_MX53 3
#define SUSPEND_ID_NONE 4
static int __init pm_init(void)
{
	unsigned long iram_paddr;

	pr_info("Static Power Management for Freescale i.MX5\n");
	if (platform_driver_register(&mx5_pm_driver) != 0) {
		printk(KERN_ERR "mx5_pm_driver register failed\n");
		return -ENODEV;
	}
	suspend_param1 = 0;
	suspend_set_ops(&mx5_suspend_ops);
	/* Move suspend routine into iRAM */
	iram_alloc(SZ_4K, &iram_paddr);
	/* Need to remap the area here since we want the memory region
		 to be executable. */
	suspend_iram_base = __arm_ioremap(iram_paddr, SZ_4K,
					  MT_HIGH_VECTORS);

	if (cpu_is_mx51() || cpu_is_mx53()) {
		suspend_param1 =
			cpu_is_mx51() ? (void *)SUSPEND_ID_MX51:(void *)SUSPEND_ID_MX53;
		/* for mx53 ARD, doesn't operate DDR in suspend */
		if (machine_is_mx53_ard() || board_is_mx53_loco_mc34708())
			suspend_param1 = (void *)SUSPEND_ID_NONE;
		memcpy(suspend_iram_base, cpu_do_suspend_workaround,
				SZ_4K);
	} else if (cpu_is_mx50()) {
		/*
		 * Need to run the suspend code from IRAM as the DDR needs
		 * to be put into self refresh mode manually.
		 */
		memcpy(suspend_iram_base, mx50_suspend, SZ_4K);

		suspend_param1 = databahn_base;
	}
	suspend_in_iram = (void *)suspend_iram_base;

	cpu_wp_tbl = get_cpu_wp(&cpu_wp_nr);

	cpu_clk = clk_get(NULL, "cpu_clk");
	if (IS_ERR(cpu_clk)) {
		printk(KERN_DEBUG "%s: failed to get cpu_clk\n", __func__);
		return PTR_ERR(cpu_clk);
	}
	printk(KERN_INFO "PM driver module loaded\n");

	if (machine_is_mx53_smd() ||
		machine_is_mx53_loco())
		pm_da9053_i2c_init(I2C1_BASE_ADDR - MX53_OFFSET);

	return 0;
}


static void __exit pm_cleanup(void)
{
	/* Unregister the device structure */
	platform_driver_unregister(&mx5_pm_driver);
}

module_init(pm_init);
module_exit(pm_cleanup);

MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("PM driver");
MODULE_LICENSE("GPL");