path: root/arch/arm/mach-tegra/Kconfig

# Copyright (c) 2012-2014, NVIDIA CORPORATION.  All rights reserved.
#
# This program is free software; you can redistribute it and/or modify it
# under the terms and conditions of the GNU General Public License,
# version 2, as published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

if ARCH_TEGRA

comment "NVIDIA Tegra options"

config ARCH_TEGRA_2x_SOC
	bool "Enable support for Tegra20 family"
	depends on !ARCH_TEGRA_12x_SOC
	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
	select ARM_ERRATA_720789
	select ARM_ERRATA_742230 if SMP
	select ARM_ERRATA_751472
	select ARM_ERRATA_754327 if SMP
	select ARM_ERRATA_761320 if SMP
	select ARM_ERRATA_764369 if SMP
	select ARM_GIC
	select COMMON_CLK
	select CPU_FREQ_TABLE if CPU_FREQ
	select CPU_V7
	select PINCTRL
	select PINCTRL_TEGRA20
	select PL310_ERRATA_727915 if CACHE_L2X0
	select PL310_ERRATA_769419 if CACHE_L2X0
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_ULPI if USB_PHY
	select USB_ULPI_VIEWPORT if USB_PHY
	help
	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

config ARCH_TEGRA_3x_SOC
	bool "Enable support for Tegra30 family"
	depends on !ARCH_TEGRA_12x_SOC
	select ARM_ERRATA_743622
	select ARM_ERRATA_751472
	select ARM_ERRATA_754322
	select ARM_ERRATA_761320 if SMP
	select ARM_ERRATA_764369 if SMP
	select ARM_GIC
	select COMMON_CLK
	select CPU_FREQ_TABLE if CPU_FREQ
	select CPU_V7
	select PINCTRL
	select PINCTRL_TEGRA30
	select PL310_ERRATA_727915
	select PL310_ERRATA_769419 if CACHE_L2X0
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_ULPI if USB_PHY
	select USB_ULPI_VIEWPORT if USB_PHY
	help
	  Support for NVIDIA Tegra T30 processor family, based on the
	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

config ARCH_TEGRA_12x_SOC
	bool "Tegra 12x family SOC"
	select ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS if !ARM64
	select ARCH_TEGRA_HAS_PCIE
	select CPU_V7
	select ARM_L1_CACHE_SHIFT_6
	select ARM_ARCH_TIMER
	select ARCH_TEGRA_HAS_SYMMETRIC_CPU_PWR_GATE
	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
	select ARM_CPU_SUSPEND if PM
	select ARM_SAVE_DEBUG_CONTEXT if PM_SLEEP
	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
	select ARM_GIC
	select ARCH_REQUIRE_GPIOLIB
	select USB_ARCH_HAS_EHCI if USB_SUPPORT
	select USB_EHCI_TEGRA if USB_SUPPORT
	select USB_ULPI if USB_SUPPORT
	select USB_ULPI_VIEWPORT if USB_SUPPORT
	select USE_OF
	select REPORT_PRESENT_CPUS if TEGRA_AUTO_HOTPLUG
	select TEGRA_LP2_CPU_TIMER if !TEGRA_RAIL_OFF_MULTIPLE_CPUS
	select ARCH_SUPPORTS_MSI if PCI_TEGRA
	select PCI_MSI if PCI_TEGRA
	select NVMAP_CACHE_MAINT_BY_SET_WAYS if TEGRA_NVMAP && !ARM64
	select NVMAP_CACHE_MAINT_BY_SET_WAYS_ON_ONE_CPU if TEGRA_NVMAP && !ARM64
	select ARCH_TEGRA_HAS_CL_DVFS
	select TEGRA_DUAL_CBUS
	select SOC_BUS
	select THERMAL
	select PM_GENERIC_DOMAINS if PM
	select PINCTRL
	select PINCTRL_TEGRA124
	select POWER_RESET
	select SYSTEM_PMIC
	select TEGRA_DC_TEMPORAL_DITHER
	select TEGRA_VDD_CORE_OVERRIDE if TEGRA_EMC_SCALING_ENABLE
	select REGULATOR_TEGRA_DFLL_BYPASS if !ARCH_TEGRA_13x_SOC
	select HAVE_ARM_ARCH_TIMER
	select ARCH_HAS_PASR
	select POWER_SUPPLY
	select TEGRA_ISOMGR
	select TEGRA_ISOMGR_SYSFS
	select PROC_DEVICETREE
	help
	  Support for NVIDIA Tegra 12x family of SoCs, based upon the
	  ARM Cortex-A15MP CPU

config TEGRA_NO_CARVEOUT
	bool "Disable Tegra carveout"
	default n

config ARCH_TEGRA_HAS_ARM_SCU
	bool

config ARCH_TEGRA_HAS_DUAL_3D
	bool

config ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS
	bool

config ARCH_TEGRA_HAS_SYMMETRIC_CPU_PWR_GATE
	bool

config ARCH_TEGRA_HAS_PCIE
	bool

config ARCH_TEGRA_HAS_SATA
	bool

config ARCH_TEGRA_HAS_CL_DVFS
	bool

config TEGRA_AHB
	bool "Enable AHB driver for NVIDIA Tegra SoCs"
	default y
	help
	  Adds AHB configuration functionality for NVIDIA Tegra SoCs,
	  which controls AHB bus master arbitration and some
	  performance parameters(priority, prefech size).

comment "Tegra board type"

config MACH_BONAIRE
       bool "Bonaire board"
       depends on ARCH_TEGRA_12x_SOC
       select TEGRA_FPGA_PLATFORM
       help
         Support for NVIDIA Bonaire FPGA development platform

config MACH_ARDBEG
       bool "ARDBEG board"
       depends on ARCH_TEGRA_12x_SOC || ARCH_TEGRA_11x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5645 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_MAX98090 if SND_SOC
       select SYSEDP_FRAMEWORK
       help
         Support for NVIDIA ARDBEG Development platform

config MACH_LOKI
       bool "Loki board"
       depends on ARCH_TEGRA_12x_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
       select MACH_HAS_SND_SOC_TEGRA_RT5645 if SND_SOC
       select LEDS_PWM
       help
         Support for NVIDIA LOKI Development platform

config MACH_P2360
       bool "P2360 board"
       depends on ARCH_TEGRA_12x_SOC
       help
         Support for NVIDIA P2360 Automotive Development platform

config MACH_VCM30_T124
       bool "VCM30_T124(Automotive) board"
       depends on ARCH_TEGRA_12x_SOC
       help
         Support for NVIDIA VCM30_T124 Automotive Development platform

config MACH_LAGUNA
	 bool "LAGUNA board"
	 depends on ARCH_TEGRA_12x_SOC || ARCH_TEGRA_11x_SOC
	 select MACH_HAS_SND_SOC_TEGRA_RT5639 if SND_SOC
	 select MACH_HAS_SND_SOC_TEGRA_RT5645 if SND_SOC
	 select MACH_HAS_SND_SOC_TEGRA_MAX98090 if SND_SOC
	 help
	 Support for NVIDIA LAGUNA Development platform

choice
       prompt "Tegra platform type"
       default TEGRA_SILICON_PLATFORM

config TEGRA_SILICON_PLATFORM
        bool "Silicon"
        help
          This enables support for a Tegra silicon platform.

config TEGRA_SIMULATION_PLATFORM
        bool "Simulation"
        select TEGRA_PRE_SILICON_SUPPORT
	select LESS_GCC_OPT if DEBUG_KERNEL
	select READABLE_ASM if DEBUG_KERNEL
        select TEGRA_SIMULATION_SPLIT_MEM
        help
          This enables support for a Tegra simulation platform.
          Select this only if you are an NVIDIA developer working
          on a simulation platform.

config TEGRA_FPGA_PLATFORM
        bool "FPGA"
        select TEGRA_PRE_SILICON_SUPPORT
	select LESS_GCC_OPT if DEBUG_KERNEL
	select READABLE_ASM if DEBUG_KERNEL
        help
          This enables support for a Tegra FPGA platform.
          Select this only if you are an NVIDIA developer working
          on a FPGA platform.
endchoice

config TEGRA_PRE_SILICON_SUPPORT
        bool "Enable pre-silicon platform support"
        help
          This enables support for Tegra early development platforms.
          Select this only if you are an NVIDIA developer working on
          FPGA, Emulation or Simulation.

config TEGRA_SIMULATION_SPLIT_MEM
        bool "Tegra Simulation Split Memory Configuration"
        default n
        help
          This enables support for a Tegra split memory
          simulation. It can be used as part of ASIM/QT test
          setup. Select this only if you are an NVIDIA developer
          working on a simulation platform.

config FIQ_DEBUGGER
	bool "FIQ Mode Serial Debugger"
	select FIQ
	select FIQ_GLUE
	default n
	help
	  The FIQ serial debugger can accept commands even when the
	  kernel is unresponsive due to being stuck with interrupts
	  disabled. Also, we can save kernel log in FIQ handler.
	  It will not work if FIQ not work or hardware hang.

config FIQ_DEBUGGER_NO_SLEEP
	bool "Keep serial debugger active"
	depends on FIQ_DEBUGGER
	default n
	help
	  Enables the serial debugger at boot. Passing
	  fiq_debugger.no_sleep on the kernel commandline will
	  override this config option.
	  Enable this config then serial debugger will never off.

config FIQ_DEBUGGER_WAKEUP_IRQ_ALWAYS_ON
	bool "Don't disable wakeup IRQ when debugger is active"
	depends on FIQ_DEBUGGER
	default n
	help
	  Don't disable the wakeup irq when enabling the uart clock.  This will
	  cause extra interrupts, but it makes the serial debugger usable with
	  on some MSM radio builds that ignore the uart clock request in power
	  collapse.

config FIQ_DEBUGGER_CONSOLE
	bool "Console on FIQ Serial Debugger port"
	depends on FIQ_DEBUGGER
	default n
	help
	  Enables a console so that printk messages are displayed on
	  the debugger serial port as the occur.

config FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE
	bool "Put the FIQ debugger into console mode by default"
	depends on FIQ_DEBUGGER_CONSOLE
	default n
	help
	  If enabled, this puts the fiq debugger into console mode by default.
	  Otherwise, the fiq debugger will start out in debug mode.

config TEGRA_FIQ_DEBUGGER
	bool "Enable the FIQ serial debugger on Tegra"
	default n
	select FIQ_DEBUGGER
	help
	  Enables the FIQ serial debugger on Tegra

config TEGRA_WDT_FIQ_SOFT_HANG_STACK_DUMP
	bool "Enable Tegra system soft hang stack dump"
	default n
	help
	  This option will generate stack dump for all online CPUs upon
	  soft hang detection by using the FIQ debugger mechanism even
	  the IRQ is disabled on the CPU. This option is useful if we
	  only have one watchdog generating FIQ for all CPUs.

config TEGRA_PTM
	bool "Enable PTM debugger on Tegra"
	default n
	help
	  This option enables PTM debugger on Tegra. This driver is used
	  for tracking each branch instructions executed by processor. It
	  can save such tracking information to the ETB buffer, which can
	  be further parsed by a user space program to re-construct the
	  complete program flows.

config TEGRA_EMC_SCALING_ENABLE
	bool "Enable scaling the memory frequency"
	default n

config TEGRA_CPU_DVFS
	bool "Enable voltage scaling on Tegra CPU"
	default y

config TEGRA_CORE_DVFS
	bool "Enable voltage scaling on Tegra core"
	depends on TEGRA_CPU_DVFS
	default y

config TEGRA_GPU_DVFS
	bool "Enable voltage scaling on Tegra GPU"
	depends on TEGRA_SILICON_PLATFORM
	depends on ARCH_TEGRA_12x_SOC
	default y

config TEGRA_DVFS_RAIL_CONNECT_ALL
	bool "Enable voltage scaling only if all rails matched by dvfs (cpu, gpu, core) are connected"
	default y
	help
	 This option adds an extra check to enable voltage scaling. Set to y
	 if you want to enable voltage scaling only when all the rails matched
	 by dvfs connect successfully to the system

config TEGRA_AVP_KERNEL_ON_MMU
	bool "Use AVP MMU to relocate AVP kernel"
	depends on ARCH_TEGRA_2x_SOC
	default y
	help
	  Use AVP MMU to relocate AVP kernel (nvrm_avp.bin).

config TEGRA_AVP_KERNEL_ON_SMMU
	bool "Use SMMU to relocate AVP kernel"
	depends on TEGRA_IOMMU_SMMU
	default y
	help
	  Use SMMU to relocate AVP kernel (nvrm_avp.bin).

config TEGRA_ARB_SEMAPHORE
	bool

config TEGRA_THERMAL_THROTTLE
	bool "Enable throttling of CPU speed on overtemp"
	depends on CPU_FREQ
	depends on THERMAL
	default y
	help
	  Also requires enabling a temperature sensor such as NCT1008.

config TEGRA_THERMAL_THROTTLE_EXACT_FREQ
	bool "Use exact cpu frequency capping when thermal throttling"
	depends on TEGRA_THERMAL_THROTTLE
	default y if TEGRA_THERMAL_THROTTLE
	default n
	help
	  When this option is enabled, the cpu will run at the exact
	  frequency specified in the thermal throttle table when thermal
	  throttling; when disabled, the cpu frequency will clip to
	  the next lower frequency from the cpu frequency table.

config TEGRA_CLOCK_DEBUG_WRITE
	bool "Enable debugfs write access to clock tree"
	depends on DEBUG_FS
	default n

config TEGRA_CLOCK_DEBUG_FUNC
	bool "Enable extra debug functions to access to clock tree"
	depends on TEGRA_CLOCK_DEBUG_WRITE
	default n

config TEGRA_CLUSTER_CONTROL
	bool
	depends on ARCH_TEGRA_HAS_DUAL_CPU_CLUSTERS
	default y if PM_SLEEP

config TEGRA_CPUQUIET
	bool

config TEGRA_AUTO_HOTPLUG
	bool "Enable automatic CPU hot-plugging"
	depends on HOTPLUG_CPU && CPU_FREQ && !ARCH_CPU_PROBE_RELEASE && !ARCH_TEGRA_2x_SOC
	select TEGRA_CPUQUIET
	default y
	help
	  This option enables turning CPUs off/on and switching tegra
	  high/low power CPU clusters automatically, corresponding to
	  CPU frequency scaling.

config TEGRA_MC_EARLY_ACK
	bool "Enable early acknowledgement from mermory controller"
	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_11x_SOC
	default y
	help
	  This option enables early acknowledgement from memory
	  controller. This feature is used to improve CPU memory
	  write performance.

config TEGRA_ERRATA_1252872
	bool "DLL experiences internal sychronization issue"
	depends on ARCH_TEGRA_14x_SOC
	help
	  The digital DLL in the T148 A01 chip has an internal synchronization
	  issue that can lead to reading invalid results. These invalid results
	  are returned when multiple bits change in one calibration value to
	  the next. To work around this a two step process is used: (1) the DLL
	  is enabled and locked (but not sampled); and (2) the DLL clock is
	  disabled and the internal state machine is reinvoked (and then
	  sampled). This requires that the DLL is never placed in a continuous
	  running mode.

config TEGRA_ERRATA_1213083
	bool "HOTRESET_STAT can return invalid status"
	depends on ARCH_TEGRA_14x_SOC
	help
	  On T14x it is possible to read the HOTRESET_STAT register before
	  the HW has had a chance to transition into the flush state. Thus
	  the flush status appears to be done. This errata adds a small delay
	  (at least 25 mcclk cycles) before polling the HOTRESET_STAT register.

config TEGRA_ERRATA_1157520
	bool "Memory writes are not consistent/ordered from CPU"
	depends on ARCH_TEGRA_11x_SOC
	help
	  On T11x With early ack scoreboard on, the read/writes to
	  SO and Non-Cached meory are randomly not observed in the
	  order they are performed. Enabling this errata disables
	  early ack scoreboard for T11x.

config TEGRA_ERRATA_977223
	bool "PTSA ring 1 to ring 0 does not account for forced coalescing"
	depends on ARCH_TEGRA_11x_SOC || ARCH_TEGRA_14x_SOC
	help
	  The forced coalescing logic will "drop" the first request of the
	  coalesced pair after the ring 1 snap arbiter.  This means that for
	  forced coalescing clients, ring 0 only sees half the requests.
	  Therefore the grant decrement for the ptsa would only happen 1/2 of
	  the expected times resulting in ring 1 input always being
	  high priority. A SW work around is to program the ring 1 input to
	  ring 0 ptsa rate to be 1/2 of the value intended.

config TEGRA_EDP_LIMITS
	bool "Enforce electrical design limits on CPU rail"
	depends on CPU_FREQ
	depends on THERMAL
	default y if ARCH_TEGRA_3x_SOC
	default n
	help
	  Limit maximum CPU frequency based on temperature and number
	  of on-line CPUs to keep CPU rail current within power supply
	  capabilities.

config TEGRA_CPU_EDP_FIXED_LIMITS
	bool "Enforce fixed EDP limits on CPU rail per chip SKU"
	depends on ARCH_TEGRA_11x_SOC
	depends on TEGRA_EDP_LIMITS
	default n
	help
	  Enforce CPU EDP frequency limits which are fixed for a given
	  chip SKU. By default, the max frequency is determined optimally
	  for each individual chip.

config TEGRA_GPU_EDP
       bool "enable GPU EDP "
       depends on THERMAL
       depends on TEGRA_EDP_LIMITS
       depends on ARCH_TEGRA_12x_SOC
       default n
       help
         Limit maximum GPU frequency based on temperature
         to keep GPU rail current within power supply
         capabilities.

config TEGRA_CPU_VOLT_CAP
	bool "Allow cpu voltage to be capped based on usage metrics."
	depends on TEGRA_EDP_LIMITS
	default n
	help
	  Provide userspace with an interface to dynamically adjust
	  CPU <voltage, temperature> cap. Userspace must respect
	  datasheet-imposed limits.

config TEGRA_CORE_CAP
	bool "Control core capping limits"
	default y
	help
	  Provide userspace control of floor and caps via sysfs and QoS
	  interface.


config TEGRA_EMC_TO_DDR_CLOCK
	int "EMC to DDR clocks ratio"
	default "2" if ARCH_TEGRA_2x_SOC
	default "1"

config TEGRA_GADGET_BOOST_CPU_FREQ
	int "Boost cpu frequency for tegra usb gadget"
	range 0 1300 if ARCH_TEGRA_3x_SOC
	range 0 1800 if ARCH_TEGRA_11x_SOC
	range 0 2000 if ARCH_TEGRA_14x_SOC
	range 0 2000 if ARCH_TEGRA_12x_SOC
	default 0
	help
	  Devices need to boost frequency of CPU when they are connected
	  to host pc through usb cable for better performance. This value
	  is the amount of the frequency (in Mhz) to be boosted. If it is
	  zero boosting frequency will not be enabled. This value will be
	  used only by usb gadget driver.

config TEGRA_EHCI_BOOST_CPU_FREQ
        int "Boost cpu frequency(in Mhz) for tegra usb host"
        range 0 1300 if ARCH_TEGRA_3x_SOC
        range 0 1800 if ARCH_TEGRA_11x_SOC
        range 0 2000 if ARCH_TEGRA_14x_SOC
        range 0 2000 if ARCH_TEGRA_12x_SOC
        default 0
        help
          This value is the amount of the cpu frequency (in Mhz)
          to be boosted. If it is zero boosting frequency will not
          be enabled. This value will be used only by usb ehci driver.

config TEGRA_CPU_FREQ_GOVERNOR_KERNEL_START
	bool "Initialize CPU governor to a performance after DVFS initialization"
	default 0
	help
	  During a boot up, once DVFS is initialized, there is a period of
	  time in which the frequency could adjusted higher before the userspace
	  configures the governor by using a more performance governor for
	  a faster boot up. Selecting this option will make the system to choose
	  a performance governor once the DVFS initialization is complete. Userspace
	  or init script can override the governor chosen here.

config TEGRA_DYNAMIC_PWRDET
	bool "Enable dynamic activation of IO level auto-detection"
	default n
	help
	  This option allows turning off tegra IO level auto-detection
	  when IO power is stable. If set auto-detection cells are active
	  only during power transitions, otherwise, the cells are active
	  always

config TEGRA_EDP_EXACT_FREQ
	bool "Use maximum possible cpu frequency when EDP capping"
	depends on TEGRA_EDP_LIMITS
	default y
	help
	  When enabled the cpu will run at the exact frequency
	  specified in the EDP table when EDP capping is applied; when
	  disabled the next lower cpufreq frequency will be used.

config TEGRA_WAKEUP_MONITOR
	bool "Enable tegra wakeup monitor"
	depends on PM_SLEEP
	help
	  This option enables support for the monitor of tegra wakeups, it will
	  send out wakeup source and uevents which indicate suspend_prepare and
	  post_suspend.

config TEGRA_INTERNAL_USB_CABLE_WAKE_SUPPORT
	bool "Enable Tegra internal USB cable wake support"
	depends on PM_SLEEP
	default n
	help
	  Enables Tegra suspend wakeup with USB cable through Tegra
	  integrated hardware. Enabled for selected Tegra chipsets.
	  This feature allows wakeup from suspend using either
	  device or host type USB cable.

config TEGRA_BB_XMM_POWER
	bool "Enable power driver for XMM modem"
	default n
	help
	  Enables power driver which controls gpio signals to XMM modem.

config TEGRA_BB_XMM_POWER2
	tristate "Enable power driver for XMM modem (flashless)"
	default n
	help
	  Enables power driver which controls gpio signals to XMM modem
	  (in flashless configuration).  User-mode application must
	  insert this LKM to initiate 2nd USB enumeration power sequence
	  - after modem software has been downloaded to flashless device.

config TEGRA_BBC_PROXY
	bool "Enable BBC Proxy driver"
	default n
	help
	  Enables driver which handles miscellaneous services required
	  by the BB core. Handles initialization of EDP, ISO Bandwidth,
	  and Latency Allowance settings. Additional setting adjustments
	  can be done from user space through sysfs.

config TEGRA_BBC_THERMAL
	bool "Enable BBC Thermal reporting support"
	depends on NVSHM
	depends on TEGRA_BBC_PROXY
	default y
	help
	  Enables the reporting of BBC-managed temperature sensors values as
	  thermal zones.  This uses the statistics framework where the data
	  reside, and thus depends on the NVSHM driver to provides the API to
	  browse the BBC statistics and be notified of modem [re-]boot.

config TEGRA_PLLM_RESTRICTED
	bool "Restrict PLLM usage as module clock source"
	depends on !ARCH_TEGRA_2x_SOC
	default n
	help
	  When enabled, PLLM usage may be restricted to modules with dividers
	  capable of dividing maximum PLLM frequency at minimum voltage. When
	  disabled, PLLM is used as a clock source with no restrictions (which
	  may effectively increase lower limit for core voltage).

config TEGRA_WDT_RECOVERY
	bool "Enable suspend/resume watchdog recovery mechanism"
	default n
	help
	  Enables watchdog recovery mechanism to protect against
	  suspend/resume hangs.

config TEGRA_LP2_CPU_TIMER
	bool

config TEGRA_RAIL_OFF_MULTIPLE_CPUS
	bool

config TEGRA_SLOW_CSITE
	bool "lower csite clock to 1 Mhz to reduce its power consumption"
	default n
	help
	  When enabled, csite will be running at 1 Mhz and the performance of
	  jtag, lauterbach and other debugger will be extremely slow.

config TEGRA_PREINIT_CLOCKS
	bool "Preinitialize Tegra clocks to known states"
	default n
	help
	  Preinitialize Tegra clocks to known states before actual full-
	  scale clock initialization starts.

config TEGRA_PREPOWER_WIFI
	bool "Pre-power up WiFi "
	default n
	help
	  Pre-power up the on board WiFi chip

config TEGRA_DYNAMIC_CBUS
	bool "Adjust dynamically graphics clocks cumulative dvfs table"

config TEGRA_DUAL_CBUS
	bool "Use two plls (PLLC2/PLLC3) as graphics clocks sources"

config TEGRA_MIGRATE_CBUS_USERS
	bool "Move cbus users between source plls to optimize cumulative dvfs"
	depends on TEGRA_DYNAMIC_CBUS && TEGRA_DUAL_CBUS

config TEGRA_SKIN_THROTTLE
	bool "Skin Temperature throttling"
	depends on TEGRA_THERMAL_THROTTLE
	depends on THERM_EST
	default n
	help
	  Enable throttling to control the temperature of the skin/case
	  of the device.

config ARCH_TEGRA_4GB_MEMORY
	bool "Full 4GB physical memory support"
	default n
	help
	  Harmless to select this even if hardware does not support full
	  4GB physical memory.

config TEGRA_LP1_LOW_COREVOLTAGE
	bool "LP1 low core voltage"
	default n
	depends on ARCH_TEGRA_3x_SOC || ARCH_TEGRA_11x_SOC
	help
		Enable support for LP1 Core voltage to set to lowest

config TEGRA_DISABLE_BBC_LATENCY_ALLOWANCE
	bool "Disable BBCRW latency allowance"
	help
	  Disables BBCRW latency allowance configuration by
	  clients. The BBCRW latency allowance would remain
	  same as boot time configured value.

config TEGRA_BASEBAND
	bool "Enable integrated tegra baseband support"
	default n
	help
	  This option enables support for integrated icera baseband
	  This driver is used to setup shared memory space, provide
	  functions to handle IPC mechanism and a sysfs interface for IPC
	  notification which support polling on sysfs file.

config TEGRA_BASEBAND_SIMU
	bool "Enable integrated tegra baseband simulation"
	select TEGRA_BASEBAND
	help
	  This option enables tegra baseband simulation when actual hardware
	  is not present. IPC is simulated when writing to status file which
	  allow high level tests in local loopback

config TEGRA_MC_PTSA
	bool "Enable MC PTSA programming"
	help
	  Enables Priority Tier Snap Arbiter programming in
	  Memory Controller. PTSA is a Memory Controller feature that
	  allows specifying the bandwidth necessary for ISO clients.

config TEGRA_ISOMGR
	bool "Isochronous Bandwidth Manager "
	help
	  When enabled, drivers for ISO units can obtain ISO BW.
	  The memory controller (MC) for each Tegra platform can supply
	  a limited amount of isochronous (real-time) bandwidth.  When
	  enabled, isomgr will manage a pool of ISO BW.

config TEGRA_ISOMGR_POOL_KB_PER_SEC
	int "Size of isomgr pool "
	default 0
	help
	  Set this maximum ISO BW (in Kbytes/sec) that platform supports.
	  The memory controller (MC) for each Tegra platform can supply
	  a limited amount of isochronous (real-time) bandwidth.  Each
	  platform must specify the maximum amount of ISO BW that isomgr
	  should manage.

config TEGRA_ISOMGR_SYSFS
	bool "Visibility into Isochronous Bandwidth Manager state "
	depends on TEGRA_ISOMGR
	help
	  When enabled, sysfs can be used to query isomgr state.
	  This is used for visibility into isomgr state.  It could
	  be useful in debug or in understanding performance on a
	  running system.

config TEGRA_ISOMGR_MAX_ISO_BW_QUIRK
	bool "Relax Max ISO Bw limit"
	depends on TEGRA_ISOMGR
	default y
	help
	  When enabled, allows system with less ISO bw continue to
	  work. This is necessary for systems running at lower
	  EMC clock freq or on FPGA.

config TEGRA_IO_DPD
	bool "Allow IO DPD"
	depends on ARCH_TEGRA_3x_SOC
	depends on PM_SLEEP
	default y
	help
	  Allow devices listed in tegra_list_io_dpd[] to go into
	  Deep Power Down (DPD) state. This is a temporary config
	  option until a proper way is implemented to resolve this issue.

config TEGRA_USE_DFLL_RANGE
	int "Default CPU DFLL operating range"
	depends on ARCH_TEGRA_HAS_CL_DVFS
	range 0 3
	default "0" if TEGRA_SILICON_PLATFORM && ARCH_TEGRA_21x_SOC
	default "1" if TEGRA_SILICON_PLATFORM && ARCH_TEGRA_13x_SOC
	default "2" if TEGRA_SILICON_PLATFORM && ARCH_TEGRA_11x_SOC
	default "1"
	help
	  Defines default range for dynamic frequency lock loop (DFLL)
	  to be used as CPU clock source:
	  "0" - DFLL is not used,
	  "1" - DFLL is used as a source for all CPU rates
	  "2" - DFLL is used only for high rates above crossover with
		PLL dvfs curve
	  "3" - DFLL usage is controlled by thermal cooling device

config REGULATOR_TEGRA_DFLL_BYPASS
	bool "Use dfll bypass regulator"
	depends on ARCH_TEGRA_HAS_CL_DVFS
	default n
        help
	  Enables use of dfll bypass interfaces for voltage control
	  by s/w driver.

config TEGRA_TIMER_HZ
	int "Kernel HZ (jiffies per second)"
	default "100" if TEGRA_PRE_SILICON_SUPPORT
	default "1000"

config TEGRA_SOCTHERM
	bool "Enable soctherm"
	depends on ARCH_TEGRA_11x_SOC || ARCH_TEGRA_14x_SOC || ARCH_TEGRA_12x_SOC
	default y
        help
	  Enables use of soctherm for thermal management.

config TEGRA_USE_SECURE_KERNEL
	bool "Boot the linux kernel in non-secure mode"
	help
	 When enabled, the CPU will boot in the non-secure mode and issue
	 SMCs in order to access secure registers. SMC requests would be
	 serviced by a third party software component running in the secure
	 mode.

config TEGRA_VIRTUAL_CPUID
	bool "virtualized CPUID"
	depends on !TEGRA_USE_SECURE_KERNEL
	depends on ARCH_TEGRA_HAS_SYMMETRIC_CPU_PWR_GATE
	default n
	help
	  Enables virtualized CPUID.

config TEGRA_NVDUMPER
	bool "Enable NvDumper for post-mortem debugging"
	default n
	help
	  The nvdumper is a tool that saves a copy of RAM following a crash.
	  nvdumper kernel module tracks whether the system has been rebooted
	  cleanly. It does this by writing 'dirty' to a fixed physical memory
	  address when the kernel starts.
	  Then, on a planned reboot, we write 'clean' to this location.
	  The bootloader can then examine this location and see if the reboot
	  was dirty or clean.
	  It will dump the contents of memory after a dirty reboot.
	  This tool would be helpful for debugging kernel crash.
	  In order to use this feature, you should enable debug feature in
	  bootloader compiling option also (-DENABLE_NVDUMPER).
	  You can dump RAM with nvflash tool in dirty boot status.
	  usage: nvflash --dumpram [phy. RAM offset] [length] <filename>

config TEGRA_ARBITRATION_EMEM_INTR
	bool "Enable the ARBITRATION_EMEM interrupt in the MC"
	help
	  Enable this to allow the kernel to track arbitration conflicts
	  in the memory controller.

config TEGRA_CORE_EDP_LIMITS
	bool "Enforce electrical design limits on core rail"
	depends on TEGRA_SILICON_PLATFORM
	depends on THERMAL
	default n
	help
	  Limit maximum GPU and memory frequency to keep core rail current
	  within power supply capabilities.

config TEGRA_PLLM_SCALED
	bool "Enable memory PLLM run time scaling"
	depends on TEGRA_DUAL_CBUS
	select TEGRA_PLLM_RESTRICTED
	default n
	help
	  When enabled, memory PLLM can be scaled at run time to reduce
	  granularity of possible memory rate steps. In this case PLLC
	  provides a backup memory clock while PLLM is re-locking to the
	  new rate.

config ARCH_TEGRA_VIC
	bool "Tegra Video Image Compositor present"
	default y
	help
	  Say Y here if the SOC supports the Tegra Video Image Compositor.
	  Note that this not the same as the ARM Vectored Interrupt Controller.

config TEGRA_USE_NCT
	bool "Enable NCT partition access"
	help
	  When enabled, we can read non-volatile items from NCT partition.

config TEGRA_VDD_CORE_OVERRIDE
	bool "Enable core rail override support"
	depends on TEGRA_SILICON_PLATFORM
	default n
	select CONFIG_TEGRA_CORE_CAP
	help
	  When enabled, core rail can be fixed and locked at specified voltage
	  within override range, and core modules clocks are capped at rates
	  safe at override level.

config TEGRA_GMI
	bool

config TEGRA_SOC_TIMERS
	bool "Enable support for SOC timers"
	default n
	help
	  When enabled, cpu clock events will be using SOC timers instead
	  of arm private timers.

config TEGRA_LP0_IN_IDLE
	bool "Enable support LP0-in-idle state"
	default n

config TEGRA_HDMI_PRIMARY
	bool "Use HDMI as primary display"
	depends on TEGRA_DC
	depends on !FRAMEBUFFER_CONSOLE
	help
	  Configure system to support HDMI as the primary display.
	  When enabled, dispA/fb0 will be configured to use HDMI.

config TEGRA_USE_SIMON
	bool "Use Tegra Silicon Monitor"
	default n
	help
	  Enable Tegra silicon state monitoring, grading, and notification.

config AID_FUSE
	bool "Support AID fuse reads"
	default n if ARCH_TEGRA_11x_SOC || ARCH_TEGRA_14x_SOC || \
	(ARCH_TEGRA_12x_SOC && !ARCH_TEGRA_13x_SOC)
	default y
	help
	  When enabled, allows sysfs reads of the AID fuse, which contains
	  the chip family ID and a chip-unique Tegra ID. Supported on t132+.
endif