summaryrefslogtreecommitdiff
path: root/arch/blackfin/include/asm/dpmc.h
blob: d1ba87793e9bbc153e13de2cd85cd30f1e1f6acd (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
/*
 * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
 *
 * Copyright (C) 2004-2009 Analog Device Inc.
 *
 * Licensed under the GPL-2
 */

#ifndef _BLACKFIN_DPMC_H_
#define _BLACKFIN_DPMC_H_

#include <mach/pll.h>

/* PLL_CTL Masks */
#define DF			0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
#define PLL_OFF			0x0002	/* PLL Not Powered */
#define STOPCK			0x0008	/* Core Clock Off */
#define PDWN			0x0020	/* Enter Deep Sleep Mode */
#ifdef __ADSPBF539__
# define IN_DELAY		0x0014	/* Add 200ps Delay To EBIU Input Latches */
# define OUT_DELAY		0x00C0	/* Add 200ps Delay To EBIU Output Signals */
#else
# define IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches */
# define OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals */
#endif
#define BYPASS			0x0100	/* Bypass the PLL */
#define MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
#define SPORT_HYST		0x8000	/* Enable Additional Hysteresis on SPORT Input Pins */
#define SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */

/* PLL_DIV Masks */
#define SSEL			0x000F	/* System Select */
#define CSEL			0x0030	/* Core Select */
#define CSEL_DIV1		0x0000	/* CCLK = VCO / 1 */
#define CSEL_DIV2		0x0010	/* CCLK = VCO / 2 */
#define CSEL_DIV4		0x0020	/* CCLK = VCO / 4 */
#define CSEL_DIV8		0x0030	/* CCLK = VCO / 8 */

#define CCLK_DIV1 CSEL_DIV1
#define CCLK_DIV2 CSEL_DIV2
#define CCLK_DIV4 CSEL_DIV4
#define CCLK_DIV8 CSEL_DIV8

#define SET_SSEL(x)	((x) & 0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
#define SCLK_DIV(x)	(x)		/* SCLK = VCO / x */

/* PLL_STAT Masks */
#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled */
#define FULL_ON			0x0002	/* Processor In Full On Mode */
#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled */
#define PLL_LOCKED		0x0020	/* PLL_LOCKCNT Has Been Reached */

#define RTCWS			0x0400	/* RTC/Reset Wake-Up Status */
#define CANWS			0x0800	/* CAN Wake-Up Status */
#define USBWS			0x2000	/* USB Wake-Up Status */
#define KPADWS			0x4000	/* Keypad Wake-Up Status */
#define ROTWS			0x8000	/* Rotary Wake-Up Status */
#define GPWS			0x1000	/* General-Purpose Wake-Up Status */

/* VR_CTL Masks */
#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
#define FREQ			0x3000	/* Switching Oscillator Frequency For Regulator */
#define FREQ_1000		0x3000	/* Switching Frequency Is 1 MHz */
#else
#define FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
#define FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
#define FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
#define FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
#endif
#define HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation */

#define GAIN			0x000C	/* Voltage Level Gain */
#define GAIN_5			0x0000	/* GAIN = 5 */
#define GAIN_10			0x0004	/* GAIN = 1 */
#define GAIN_20			0x0008	/* GAIN = 2 */
#define GAIN_50			0x000C	/* GAIN = 5 */

#define VLEV			0x00F0	/* Internal Voltage Level */
#ifdef __ADSPBF52x__
#define VLEV_085		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
#define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
#define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
#define VLEV_105		0x0080	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
#define VLEV_110		0x0090	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
#define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
#else
#define VLEV_085		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
#define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
#define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
#define VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
#define VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
#define VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
#define VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
#define VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
#define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
#endif

#define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
#define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
#define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
#define GPWE			0x0400	/* General-Purpose Wake-Up Enable */
#define MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
#define KPADWE			0x1000	/* Keypad Wake-Up Enable */
#define ROTWE			0x2000	/* Rotary Wake-Up Enable */
#define CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
#define SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */

#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
#define USBWE			0x0200	/* Enable USB Wakeup From Hibernate */
#else
#define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
#endif

#ifndef __ASSEMBLY__

void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void do_hibernate(int wakeup);
void set_dram_srfs(void);
void unset_dram_srfs(void);

#define VRPAIR(vlev, freq) (((vlev) << 16) | ((freq) >> 16))

#ifdef CONFIG_CPU_FREQ
#define CPUFREQ_CPU 0
#endif
struct bfin_dpmc_platform_data {
	const unsigned int *tuple_tab;
	unsigned short tabsize;
	unsigned short vr_settling_time; /* in us */
};

#endif

#endif	/*_BLACKFIN_DPMC_H_*/