path: root/arch/m68knommu/platform/528x/config.c

/***************************************************************************/

/*
 *	linux/arch/m68knommu/platform/528x/config.c
 *
 *	Sub-architcture dependant initialization code for the Motorola
 *	5280 and 5282 CPUs.
 *
 *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
 *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
 */

/***************************************************************************/

#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfqspi.h>

#ifdef CONFIG_MTD_PARTITIONS
#include <linux/mtd/partitions.h>
#endif

/***************************************************************************/

void coldfire_reset(void);
static void coldfire_qspi_cs_control(u8 cs, u8 command);

/***************************************************************************/

#if defined(CONFIG_SPI)

#if defined(CONFIG_WILDFIRE)
#define SPI_NUM_CHIPSELECTS 	0x02
#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
#define SPI_CS_MASK		0x18

#define FLASH_BLOCKSIZE		(1024*64)
#define FLASH_NUMBLOCKS		16
#define FLASH_TYPE		"m25p80"

#define M25P80_CS		0
#define MMC_CS			1

#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition stm25p_partitions[] = {
	/* sflash */
	[0] = {
		.name = "stm25p80",
		.offset = 0x00000000,
		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
		.mask_flags = 0
	}
};

#endif

#elif defined(CONFIG_WILDFIREMOD)

#define SPI_NUM_CHIPSELECTS	0x08
#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
#define SPI_CS_MASK		0x78

#define FLASH_BLOCKSIZE		(1024*64)
#define FLASH_NUMBLOCKS		64
#define FLASH_TYPE		"m25p32"
/* Reserve 1M for the kernel parition */
#define FLASH_KERNEL_SIZE   (1024 * 1024)

#define M25P80_CS		5
#define MMC_CS			6

#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition stm25p_partitions[] = {
	/* sflash */
	[0] = {
		.name = "kernel",
		.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
		.size = FLASH_KERNEL_SIZE,
		.mask_flags = 0
	},
	[1] = {
		.name = "image",
		.offset = 0x00000000,
		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
		.mask_flags = 0
	},
	[2] = {
		.name = "all",
		.offset = 0x00000000,
		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
		.mask_flags = 0
	}
};
#endif

#else
#define SPI_NUM_CHIPSELECTS 	0x04
#define SPI_PAR_VAL		0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
#endif

#ifdef MMC_CS
static struct coldfire_spi_chip flash_chip_info = {
	.mode = SPI_MODE_0,
	.bits_per_word = 16,
	.del_cs_to_clk = 17,
	.del_after_trans = 1,
	.void_write_data = 0
};

static struct coldfire_spi_chip mmc_chip_info = {
	.mode = SPI_MODE_0,
	.bits_per_word = 16,
	.del_cs_to_clk = 17,
	.del_after_trans = 1,
	.void_write_data = 0xFFFF
};
#endif

#ifdef M25P80_CS
static struct flash_platform_data stm25p80_platform_data = {
	.name = "ST M25P80 SPI Flash chip",
#ifdef CONFIG_MTD_PARTITIONS
	.parts = stm25p_partitions,
	.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
#endif
	.type = FLASH_TYPE
};
#endif

static struct spi_board_info spi_board_info[] __initdata = {
#ifdef M25P80_CS
	{
		.modalias = "m25p80",
		.max_speed_hz = 16000000,
		.bus_num = 1,
		.chip_select = M25P80_CS,
		.platform_data = &stm25p80_platform_data,
		.controller_data = &flash_chip_info
	},
#endif
#ifdef MMC_CS
	{
		.modalias = "mmc_spi",
		.max_speed_hz = 16000000,
		.bus_num = 1,
		.chip_select = MMC_CS,
		.controller_data = &mmc_chip_info
	}
#endif
};

static struct coldfire_spi_master coldfire_master_info = {
	.bus_num = 1,
	.num_chipselect = SPI_NUM_CHIPSELECTS,
	.irq_source = MCF5282_QSPI_IRQ_SOURCE,
	.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
	.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
	.irq_lp = 0x2B,  /* Level 5 and Priority 3 */
	.par_val = SPI_PAR_VAL,
	.cs_control = coldfire_qspi_cs_control,
};

static struct resource coldfire_spi_resources[] = {
	[0] = {
		.name = "qspi-par",
		.start = MCF5282_QSPI_PAR,
		.end = MCF5282_QSPI_PAR,
		.flags = IORESOURCE_MEM
	},

	[1] = {
		.name = "qspi-module",
		.start = MCF5282_QSPI_QMR,
		.end = MCF5282_QSPI_QMR + 0x18,
		.flags = IORESOURCE_MEM
	},

	[2] = {
		.name = "qspi-int-level",
		.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
		.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
		.flags = IORESOURCE_MEM
	},

	[3] = {
		.name = "qspi-int-mask",
		.start = MCF5282_INTC0 + MCFINTC_IMRL,
		.end = MCF5282_INTC0 + MCFINTC_IMRL,
		.flags = IORESOURCE_MEM
	}
};

static struct platform_device coldfire_spi = {
	.name = "spi_coldfire",
	.id = -1,
	.resource = coldfire_spi_resources,
	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
	.dev = {
		.platform_data = &coldfire_master_info,
	}
};

static void coldfire_qspi_cs_control(u8 cs, u8 command)
{
	u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;

#if defined(CONFIG_WILDFIRE)
	u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
#endif
#if defined(CONFIG_WILDFIREMOD)
	u8 cs_mask = (cs << 3) & SPI_CS_MASK;
#endif

	/*
	 * Don't do anything if the chip select is not
	 * one of the port qs pins.
	 */
	if (command & QSPI_CS_INIT) {
#if defined(CONFIG_WILDFIRE)
		MCF5282_GPIO_DDRQS  |= cs_bit;
		MCF5282_GPIO_PQSPAR &= ~cs_bit;
#endif

#if defined(CONFIG_WILDFIREMOD)
		MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
		MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
#endif
	}

	if (command & QSPI_CS_ASSERT) {
		MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
		MCF5282_GPIO_PORTQS |= cs_mask;
	} else if (command & QSPI_CS_DROP) {
		MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
	}
}

static int __init spi_dev_init(void)
{
	int retval;

	retval = platform_device_register(&coldfire_spi);
	if (retval < 0)
		return retval;

	if (ARRAY_SIZE(spi_board_info))
		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));

	return retval;
}

#endif /* CONFIG_SPI */

/***************************************************************************/

static struct mcf_platform_uart m528x_uart_platform[] = {
	{
		.mapbase	= MCF_MBAR + MCFUART_BASE1,
		.irq		= MCFINT_VECBASE + MCFINT_UART0,
	},
	{
		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 1,
	},
	{
		.mapbase 	= MCF_MBAR + MCFUART_BASE3,
		.irq		= MCFINT_VECBASE + MCFINT_UART0 + 2,
	},
	{ },
};

static struct platform_device m528x_uart = {
	.name			= "mcfuart",
	.id			= 0,
	.dev.platform_data	= m528x_uart_platform,
};

static struct resource m528x_fec_resources[] = {
	{
		.start		= MCF_MBAR + 0x1000,
		.end		= MCF_MBAR + 0x1000 + 0x7ff,
		.flags		= IORESOURCE_MEM,
	},
	{
		.start		= 64 + 23,
		.end		= 64 + 23,
		.flags		= IORESOURCE_IRQ,
	},
	{
		.start		= 64 + 27,
		.end		= 64 + 27,
		.flags		= IORESOURCE_IRQ,
	},
	{
		.start		= 64 + 29,
		.end		= 64 + 29,
		.flags		= IORESOURCE_IRQ,
	},
};

static struct platform_device m528x_fec = {
	.name			= "fec",
	.id			= 0,
	.num_resources		= ARRAY_SIZE(m528x_fec_resources),
	.resource		= m528x_fec_resources,
};


static struct platform_device *m528x_devices[] __initdata = {
	&m528x_uart,
	&m528x_fec,
};

/***************************************************************************/

#define	INTC0	(MCF_MBAR + MCFICM_INTC0)

static void __init m528x_uart_init_line(int line, int irq)
{
	u8 port;
	u32 imr;

	if ((line < 0) || (line > 2))
		return;

	/* level 6, line based priority */
	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);

	imr = readl(INTC0 + MCFINTC_IMRL);
	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
	writel(imr, INTC0 + MCFINTC_IMRL);

	/* make sure PUAPAR is set for UART0 and UART1 */
	if (line < 2) {
		port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
		port |= (0x03 << (line * 2));
		writeb(port, MCF_MBAR + MCF5282_GPIO_PUAPAR);
	}
}

static void __init m528x_uarts_init(void)
{
	const int nrlines = ARRAY_SIZE(m528x_uart_platform);
	int line;

	for (line = 0; (line < nrlines); line++)
		m528x_uart_init_line(line, m528x_uart_platform[line].irq);
}

/***************************************************************************/

static void __init m528x_fec_init(void)
{
	u32 imr;
	u16 v16;

	/* Unmask FEC interrupts at ColdFire interrupt controller */
	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);

	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
	imr &= ~0xf;
	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
	imr &= ~0xff800001;
	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);

	/* Set multi-function pins to ethernet mode for fec0 */
	v16 = readw(MCF_IPSBAR + 0x100056);
	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
	writeb(0xc0, MCF_IPSBAR + 0x100058);
}

/***************************************************************************/

void mcf_disableall(void)
{
	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
}

/***************************************************************************/

void mcf_autovector(unsigned int vec)
{
	/* Everything is auto-vectored on the 5272 */
}

/***************************************************************************/

#ifdef CONFIG_WILDFIRE
void wildfire_halt(void)
{
	writeb(0, 0x30000007);
	writeb(0x2, 0x30000007);
}
#endif

#ifdef CONFIG_WILDFIREMOD
void wildfiremod_halt(void)
{
	printk(KERN_INFO "WildFireMod hibernating...\n");

	/* Set portE.5 to Digital IO */
	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));

	/* Make portE.5 an output */
	MCF5282_GPIO_DDRE |= (1 << 5);

	/* Now toggle portE.5 from low to high */
	MCF5282_GPIO_PORTE &= ~(1 << 5);
	MCF5282_GPIO_PORTE |= (1 << 5);

	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
}
#endif

void __init config_BSP(char *commandp, int size)
{
	mcf_disableall();

#ifdef CONFIG_WILDFIRE
	mach_halt = wildfire_halt;
#endif
#ifdef CONFIG_WILDFIREMOD
	mach_halt = wildfiremod_halt;
#endif
}

/***************************************************************************/

static int __init init_BSP(void)
{
	m528x_uarts_init();
	m528x_fec_init();
	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
	return 0;
}

arch_initcall(init_BSP);

/***************************************************************************/