1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
|
/*
* arch/mips/ddb5476/setup.c -- NEC DDB Vrc-5476 setup routines
*
* Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
* Sony Software Development Center Europe (SDCE), Brussels
*/
#include <linux/init.h>
#include <linux/kbd_ll.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <asm/addrspace.h>
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/gdb-stub.h>
#include <asm/time.h>
#include <asm/debug.h>
#include <asm/traps.h>
#include <asm/ddb5xxx/ddb5xxx.h>
// #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
#ifdef USE_CPU_COUNTER_TIMER
#define CPU_COUNTER_FREQUENCY 83000000
#else
/* otherwise we use general purpose timer */
#define TIMER_FREQUENCY 83000000
#define TIMER_BASE DDB_T2CTRL
#define TIMER_IRQ (VRC5476_IRQ_BASE + VRC5476_IRQ_GPT)
#endif
static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
static void ddb_machine_restart(char *command)
{
u32 t;
/* PCI cold reset */
t = ddb_in32(DDB_PCICTRL + 4);
t |= 0x40000000;
ddb_out32(DDB_PCICTRL + 4, t);
/* CPU cold reset */
t = ddb_in32(DDB_CPUSTAT);
t |= 1;
ddb_out32(DDB_CPUSTAT, t);
/* Call the PROM */
back_to_prom();
}
static void ddb_machine_halt(void)
{
printk(KERN_NOTICE "DDB Vrc-5476 halted.\n");
while (1);
}
static void ddb_machine_power_off(void)
{
printk(KERN_NOTICE "DDB Vrc-5476 halted. Please turn off the power.\n");
while (1);
}
extern void rtc_ds1386_init(unsigned long base);
static void __init ddb_time_init(void)
{
#if defined(USE_CPU_COUNTER_TIMER)
mips_hpt_frequency = CPU_COUNTER_FREQUENCY;
#endif
/* we have ds1396 RTC chip */
rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE));
}
extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
static void __init ddb_timer_setup(struct irqaction *irq)
{
#if defined(USE_CPU_COUNTER_TIMER)
unsigned int count;
/* we are using the cpu counter for timer interrupts */
setup_irq(CPU_IRQ_BASE + 7, irq);
/* to generate the first timer interrupt */
count = read_c0_count();
write_c0_compare(count + 1000);
#else
ddb_out32(TIMER_BASE, TIMER_FREQUENCY/HZ);
ddb_out32(TIMER_BASE+4, 0x1); /* enable timer */
setup_irq(TIMER_IRQ, irq);
#endif
}
static struct {
struct resource dma1;
struct resource timer;
struct resource rtc;
struct resource dma_page_reg;
struct resource dma2;
} ddb5476_ioport = {
{
"dma1", 0x00, 0x1f, IORESOURCE_BUSY}, {
"timer", 0x40, 0x5f, IORESOURCE_BUSY}, {
"rtc", 0x70, 0x7f, IORESOURCE_BUSY}, {
"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY}, {
"dma2", 0xc0, 0xdf, IORESOURCE_BUSY}
};
static struct {
struct resource nile4;
} ddb5476_iomem = {
{ "Nile 4", DDB_BASE, DDB_BASE + DDB_SIZE - 1, IORESOURCE_BUSY}
};
static void ddb5476_board_init(void);
void __init plat_setup(void)
{
set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
board_time_init = ddb_time_init;
board_timer_setup = ddb_timer_setup;
_machine_restart = ddb_machine_restart;
_machine_halt = ddb_machine_halt;
_machine_power_off = ddb_machine_power_off;
/* request io port/mem resources */
if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||
request_resource(&ioport_resource, &ddb5476_ioport.timer) ||
request_resource(&ioport_resource, &ddb5476_ioport.rtc) ||
request_resource(&ioport_resource,
&ddb5476_ioport.dma_page_reg)
|| request_resource(&ioport_resource, &ddb5476_ioport.dma2)
|| request_resource(&iomem_resource, &ddb5476_iomem.nile4)) {
printk
("ddb_setup - requesting oo port resources failed.\n");
for (;;);
}
/* Reboot on panic */
panic_timeout = 180;
/* [jsun] we need to set BAR0 so that SDRAM 0 appears at 0x0 in PCI */
/* *(long*)0xbfa00218 = 0x8; */
/* board initialization stuff */
ddb5476_board_init();
}
/*
* We don't trust bios. We essentially does hardware re-initialization
* as complete as possible, as far as we know we can safely do.
*/
static void ddb5476_board_init(void)
{
/* ----------- setup PDARs ------------ */
/* check SDRAM0, whether we are on MEM bus does not matter */
db_assert((ddb_in32(DDB_SDRAM0) & 0xffffffef) ==
ddb_calc_pdar(DDB_SDRAM_BASE, DDB_SDRAM_SIZE, 32, 0, 1));
/* SDRAM1 should be turned off. What is this for anyway ? */
db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0);
/* flash 1&2, DDB status, DDB control */
ddb_set_pdar(DDB_DCS2, DDB_DCS2_BASE, DDB_DCS2_SIZE, 16, 0, 0);
ddb_set_pdar(DDB_DCS3, DDB_DCS3_BASE, DDB_DCS3_SIZE, 16, 0, 0);
ddb_set_pdar(DDB_DCS4, DDB_DCS4_BASE, DDB_DCS4_SIZE, 8, 0, 0);
ddb_set_pdar(DDB_DCS5, DDB_DCS5_BASE, DDB_DCS5_SIZE, 8, 0, 0);
/* shut off other pdar so they don't accidentally get into the way */
ddb_set_pdar(DDB_DCS6, 0xffffffff, 0, 32, 0, 0);
ddb_set_pdar(DDB_DCS7, 0xffffffff, 0, 32, 0, 0);
ddb_set_pdar(DDB_DCS8, 0xffffffff, 0, 32, 0, 0);
/* verify VRC5477 base addr */
/* don't care about some details */
db_assert((ddb_in32(DDB_INTCS) & 0xffffff0f) ==
ddb_calc_pdar(DDB_INTCS_BASE, DDB_INTCS_SIZE, 8, 0, 0));
/* verify BOOT ROM addr */
/* don't care about some details */
db_assert((ddb_in32(DDB_BOOTCS) & 0xffffff0f) ==
ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0));
/* setup PCI windows - window1 for MEM/config, window0 for IO */
ddb_set_pdar(DDB_PCIW0, DDB_PCI_IO_BASE, DDB_PCI_IO_SIZE, 32, 0, 1);
ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1);
ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
/* ----------- setup PDARs ------------ */
/* this is problematic - it will reset Aladin which cause we loose
* serial port, and we don't know how to set up Aladin chip again.
*/
// ddb_pci_reset_bus();
ddb_out32(DDB_BAR0, 0x00000008);
ddb_out32(DDB_BARC, 0xffffffff);
ddb_out32(DDB_BARB, 0xffffffff);
ddb_out32(DDB_BAR1, 0xffffffff);
ddb_out32(DDB_BAR2, 0xffffffff);
ddb_out32(DDB_BAR3, 0xffffffff);
ddb_out32(DDB_BAR4, 0xffffffff);
ddb_out32(DDB_BAR5, 0xffffffff);
ddb_out32(DDB_BAR6, 0xffffffff);
ddb_out32(DDB_BAR7, 0xffffffff);
ddb_out32(DDB_BAR8, 0xffffffff);
/* ----------- switch PCI1 to PCI CONFIG space ------------ */
ddb_set_pdar(DDB_PCIW1, DDB_PCI_CONFIG_BASE, DDB_PCI_CONFIG_SIZE, 32, 0, 1);
ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_CFG, 0x0, DDB_PCI_ACCESS_32);
/* ----- M1543 PCI setup ------ */
/* we know M1543 PCI-ISA controller is at addr:18 */
/* xxxx1010 makes USB at addr:13 and PMU at addr:14 */
*(volatile unsigned char *) 0xa8040072 &= 0xf0;
*(volatile unsigned char *) 0xa8040072 |= 0xa;
/* setup USB interrupt to IRQ 9, (bit 0:3 - 0001)
* no IOCHRDY signal, (bit 7 - 1)
* M1543C & M7101 VID and Subsys Device ID are read-only (bit 6 - 1)
* Make USB Master INTAJ level to edge conversion (bit 4 - 1)
*/
*(unsigned char *) 0xa8040074 = 0xd1;
/* setup PMU(SCI to IRQ 10 (bit 0:3 - 0011)
* SCI routing to IRQ 13 disabled (bit 7 - 1)
* SCI interrupt level to edge conversion bypassed (bit 4 - 0)
*/
*(unsigned char *) 0xa8040076 = 0x83;
/* setup IDE controller
* enable IDE controller (bit 6 - 1)
* IDE IDSEL to be addr:24 (bit 4:5 - 11)
* no IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0)
* no IDE ATA Primary Bus Signal Pad Control (bit 2 - 0)
* primary IRQ is 14, secondary is 15 (bit 1:0 - 01
*/
// *(unsigned char*)0xa8040058 = 0x71;
// *(unsigned char*)0xa8040058 = 0x79;
// *(unsigned char*)0xa8040058 = 0x74; // use SIRQ, primary tri-state
*(unsigned char *) 0xa8040058 = 0x75; // primary tri-state
#if 0
/* this is not necessary if M5229 does not use SIRQ */
*(unsigned char *) 0xa8040044 = 0x0d; // primary to IRQ 14
*(unsigned char *) 0xa8040075 = 0x0d; // secondary to IRQ 14
#endif
/* enable IDE in the M5229 config register 0x50 (bit 0 - 1) */
/* M5229 IDSEL is addr:24; see above setting */
*(unsigned char *) 0xa9000050 |= 0x1;
/* enable bus master (bit 2) and IO decoding (bit 0) */
*(unsigned char *) 0xa9000004 |= 0x5;
/* enable native, copied from arch/ppc/k2boot/head.S */
/* TODO - need volatile, need to be portable */
*(unsigned char *) 0xa9000009 = 0xff;
/* ----- end of M1543 PCI setup ------ */
/* ----- reset on-board ether chip ------ */
*((volatile u32 *) 0xa8020004) |= 1; /* decode I/O */
*((volatile u32 *) 0xa8020010) = 0; /* set BAR address */
/* send reset command */
*((volatile u32 *) 0xa6000000) = 1; /* do a soft reset */
/* disable ether chip */
*((volatile u32 *) 0xa8020004) = 0; /* disable any decoding */
/* put it into sleep */
*((volatile u32 *) 0xa8020040) = 0x80000000;
/* ----- end of reset on-board ether chip ------ */
/* ----------- switch PCI1 back to PCI MEM space ------------ */
ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1);
ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
}
|
