1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
/*
* setup.c: Setup pointers to hardware dependent routines.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2006, Wind River System Inc. Rongkai.zhan <rongkai.zhan@windriver.com>
*/
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/pm.h>
#include <asm/io.h>
#include <asm/bootinfo.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/gt64120.h>
unsigned long gt64120_base = KSEG1ADDR(0x14000000);
#ifdef WRPPMC_EARLY_DEBUG
static volatile unsigned char * wrppmc_led = \
(volatile unsigned char *)KSEG1ADDR(WRPPMC_LED_BASE);
/*
* PPMC LED control register:
* -) bit[0] controls DS1 LED (1 - OFF, 0 - ON)
* -) bit[1] controls DS2 LED (1 - OFF, 0 - ON)
* -) bit[2] controls DS4 LED (1 - OFF, 0 - ON)
*/
void wrppmc_led_on(int mask)
{
unsigned char value = *wrppmc_led;
value &= (0xF8 | mask);
*wrppmc_led = value;
}
/* If mask = 0, turn off all LEDs */
void wrppmc_led_off(int mask)
{
unsigned char value = *wrppmc_led;
value |= (0x7 & mask);
*wrppmc_led = value;
}
/*
* We assume that bootloader has initialized UART16550 correctly
*/
void __init wrppmc_early_putc(char ch)
{
static volatile unsigned char *wrppmc_uart = \
(volatile unsigned char *)KSEG1ADDR(WRPPMC_UART16550_BASE);
unsigned char value;
/* Wait until Transmit-Holding-Register is empty */
while (1) {
value = *(wrppmc_uart + 5);
if (value & 0x20)
break;
}
*wrppmc_uart = ch;
}
void __init wrppmc_early_printk(const char *fmt, ...)
{
static char pbuf[256] = {'\0', };
char *ch = pbuf;
va_list args;
unsigned int i;
memset(pbuf, 0, 256);
va_start(args, fmt);
i = vsprintf(pbuf, fmt, args);
va_end(args);
/* Print the string */
while (*ch != '\0') {
wrppmc_early_putc(*ch);
/* if print '\n', also print '\r' */
if (*ch++ == '\n')
wrppmc_early_putc('\r');
}
}
#endif /* WRPPMC_EARLY_DEBUG */
unsigned long __init prom_free_prom_memory(void)
{
return 0;
}
#ifdef CONFIG_SERIAL_8250
static void wrppmc_setup_serial(void)
{
struct uart_port up;
memset(&up, 0x00, sizeof(struct uart_port));
/*
* A note about mapbase/membase
* -) mapbase is the physical address of the IO port.
* -) membase is an 'ioremapped' cookie.
*/
up.line = 0;
up.type = PORT_16550;
up.iotype = UPIO_MEM;
up.mapbase = WRPPMC_UART16550_BASE;
up.membase = ioremap(up.mapbase, 8);
up.irq = WRPPMC_UART16550_IRQ;
up.uartclk = WRPPMC_UART16550_CLOCK;
up.flags = UPF_SKIP_TEST/* | UPF_BOOT_AUTOCONF */;
up.regshift = 0;
early_serial_setup(&up);
}
#endif
void __init plat_mem_setup(void)
{
extern void wrppmc_time_init(void);
extern void wrppmc_timer_setup(struct irqaction *);
extern void wrppmc_machine_restart(char *command);
extern void wrppmc_machine_halt(void);
extern void wrppmc_machine_power_off(void);
_machine_restart = wrppmc_machine_restart;
_machine_halt = wrppmc_machine_halt;
pm_power_off = wrppmc_machine_power_off;
/* Use MIPS Count/Compare Timer */
board_time_init = wrppmc_time_init;
board_timer_setup = wrppmc_timer_setup;
/* This makes the operations of 'in/out[bwl]' to the
* physical address ( < KSEG0) can work via KSEG1
*/
set_io_port_base(KSEG1);
#ifdef CONFIG_SERIAL_8250
wrppmc_setup_serial();
#endif
}
const char *get_system_type(void)
{
return "Wind River PPMC (GT64120)";
}
/*
* Initializes basic routines and structures pointers, memory size (as
* given by the bios and saves the command line.
*/
void __init prom_init(void)
{
mips_machgroup = MACH_GROUP_GALILEO;
mips_machtype = MACH_EV64120A;
add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);
wrppmc_early_printk("prom_init: GT64120 SDRAM Bank 0: 0x%x - 0x%08lx\n",
WRPPMC_SDRAM_SCS0_BASE, (WRPPMC_SDRAM_SCS0_BASE + WRPPMC_SDRAM_SCS0_SIZE));
}
|
