1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
|
/*
* Setup pointers to hardware-dependent routines.
* Copyright (C) 2000-2001 Toshiba Corporation
*
* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mtd/physmap.h>
#include <asm/reboot.h>
#include <asm/io.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/rbtx4938.h>
#include <linux/spi/spi.h>
#include <asm/txx9/spi.h>
#include <asm/txx9pio.h>
static void rbtx4938_machine_restart(char *command)
{
local_irq_disable();
writeb(1, rbtx4938_softresetlock_addr);
writeb(1, rbtx4938_sfvol_addr);
writeb(1, rbtx4938_softreset_addr);
/* fallback */
(*_machine_halt)();
}
static void __init rbtx4938_pci_setup(void)
{
#ifdef CONFIG_PCI
int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
struct pci_controller *c = &txx9_primary_pcic;
register_pci_controller(c);
if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
txx9_pci_option =
(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
TXX9_PCI_OPT_CLK_66; /* already configured */
/* Reset PCI Bus */
writeb(0, rbtx4938_pcireset_addr);
/* Reset PCIC */
txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
TXX9_PCI_OPT_CLK_66)
tx4938_pciclk66_setup();
mdelay(10);
/* clear PCIC reset */
txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
writeb(1, rbtx4938_pcireset_addr);
iob();
tx4938_report_pciclk();
tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
TXX9_PCI_OPT_CLK_AUTO &&
txx9_pci66_check(c, 0, 0)) {
/* Reset PCI Bus */
writeb(0, rbtx4938_pcireset_addr);
/* Reset PCIC */
txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
tx4938_pciclk66_setup();
mdelay(10);
/* clear PCIC reset */
txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
writeb(1, rbtx4938_pcireset_addr);
iob();
/* Reinitialize PCIC */
tx4938_report_pciclk();
tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
}
if (__raw_readq(&tx4938_ccfgptr->pcfg) &
(TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) {
/* Reset PCIC1 */
txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
if (!(__raw_readq(&tx4938_ccfgptr->ccfg)
& TX4938_CCFG_PCI1DMD))
tx4938_ccfg_set(TX4938_CCFG_PCI1_66);
mdelay(10);
/* clear PCIC1 reset */
txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
tx4938_report_pci1clk();
/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
register_pci_controller(c);
tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
}
tx4938_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
/* SPI support */
/* chip select for SPI devices */
#define SEEPROM1_CS 7 /* PIO7 */
#define SEEPROM2_CS 0 /* IOC */
#define SEEPROM3_CS 1 /* IOC */
#define SRTC_CS 2 /* IOC */
static int __init rbtx4938_ethaddr_init(void)
{
#ifdef CONFIG_PCI
unsigned char dat[17];
unsigned char sum;
int i;
/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
printk(KERN_ERR "seeprom: read error.\n");
return -ENODEV;
} else {
if (strcmp(dat, "MAC") != 0)
printk(KERN_WARNING "seeprom: bad signature.\n");
for (i = 0, sum = 0; i < sizeof(dat); i++)
sum += dat[i];
if (sum)
printk(KERN_WARNING "seeprom: bad checksum.\n");
}
tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
#endif /* CONFIG_PCI */
return 0;
}
static void __init rbtx4938_spi_setup(void)
{
/* set SPI_SEL */
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL);
}
static struct resource rbtx4938_fpga_resource;
static void __init rbtx4938_time_init(void)
{
tx4938_time_init(0);
}
static void __init rbtx4938_mem_setup(void)
{
unsigned long long pcfg;
char *argptr;
if (txx9_master_clock == 0)
txx9_master_clock = 25000000; /* 25MHz */
tx4938_setup();
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(RBTX4938_ETHER_BASE);
#endif
tx4938_sio_init(7372800, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if (!strstr(argptr, "console="))
strcat(argptr, " console=ttyS0,38400");
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
printk(KERN_INFO "PIOSEL: enabling nand selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
printk(KERN_INFO "PIOSEL: enabling ata selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
rbtx4938_spi_setup();
pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
/* fixup piosel */
if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
TX4938_PCFG_ATA_SEL)
writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
rbtx4938_piosel_addr);
else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
TX4938_PCFG_NDF_SEL)
writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
rbtx4938_piosel_addr);
else
writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
rbtx4938_piosel_addr);
rbtx4938_fpga_resource.name = "FPGA Registers";
rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
printk(KERN_ERR "request resource for fpga failed\n");
_machine_restart = rbtx4938_machine_restart;
writeb(0xff, rbtx4938_led_addr);
printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
readb(rbtx4938_fpga_rev_addr),
readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
}
static void __init rbtx4938_ne_init(void)
{
struct resource res[] = {
{
.start = RBTX4938_RTL_8019_BASE,
.end = RBTX4938_RTL_8019_BASE + 0x20 - 1,
.flags = IORESOURCE_IO,
}, {
.start = RBTX4938_RTL_8019_IRQ,
.flags = IORESOURCE_IRQ,
}
};
platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
u8 val;
unsigned long flags;
spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
val = readb(rbtx4938_spics_addr);
if (value)
val |= 1 << offset;
else
val &= ~(1 << offset);
writeb(val, rbtx4938_spics_addr);
mmiowb();
spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
}
static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
unsigned int offset, int value)
{
rbtx4938_spi_gpio_set(chip, offset, value);
return 0;
}
static struct gpio_chip rbtx4938_spi_gpio_chip = {
.set = rbtx4938_spi_gpio_set,
.direction_output = rbtx4938_spi_gpio_dir_out,
.label = "RBTX4938-SPICS",
.base = 16,
.ngpio = 3,
};
static int __init rbtx4938_spi_init(void)
{
struct spi_board_info srtc_info = {
.modalias = "rtc-rs5c348",
.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
.bus_num = 0,
.chip_select = 16 + SRTC_CS,
/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */
.mode = SPI_MODE_1 | SPI_CS_HIGH,
};
spi_register_board_info(&srtc_info, 1);
spi_eeprom_register(SEEPROM1_CS);
spi_eeprom_register(16 + SEEPROM2_CS);
spi_eeprom_register(16 + SEEPROM3_CS);
gpio_request(16 + SRTC_CS, "rtc-rs5c348");
gpio_direction_output(16 + SRTC_CS, 0);
gpio_request(SEEPROM1_CS, "seeprom1");
gpio_direction_output(SEEPROM1_CS, 1);
gpio_request(16 + SEEPROM2_CS, "seeprom2");
gpio_direction_output(16 + SEEPROM2_CS, 1);
gpio_request(16 + SEEPROM3_CS, "seeprom3");
gpio_direction_output(16 + SEEPROM3_CS, 1);
tx4938_spi_init(0);
return 0;
}
static void __init rbtx4938_mtd_init(void)
{
struct physmap_flash_data pdata = {
.width = 4,
};
switch (readb(rbtx4938_bdipsw_addr) & 7) {
case 0:
/* Boot */
txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
/* System */
txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
break;
case 1:
/* System */
txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
/* Boot */
txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
break;
case 2:
/* Ext */
txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
/* System */
txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
/* Boot */
txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
break;
case 3:
/* Boot */
txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
/* System */
txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
break;
}
}
static void __init rbtx4938_arch_init(void)
{
gpiochip_add(&rbtx4938_spi_gpio_chip);
rbtx4938_pci_setup();
rbtx4938_spi_init();
}
static void __init rbtx4938_device_init(void)
{
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
tx4938_wdt_init();
rbtx4938_mtd_init();
}
struct txx9_board_vec rbtx4938_vec __initdata = {
.system = "Toshiba RBTX4938",
.prom_init = rbtx4938_prom_init,
.mem_setup = rbtx4938_mem_setup,
.irq_setup = rbtx4938_irq_setup,
.time_init = rbtx4938_time_init,
.device_init = rbtx4938_device_init,
.arch_init = rbtx4938_arch_init,
#ifdef CONFIG_PCI
.pci_map_irq = rbtx4938_pci_map_irq,
#endif
};
|
