1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
|
/*
* arch/ppc/syslib/ppc85xx_setup.c
*
* MPC85XX common board code
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/serial.h>
#include <linux/tty.h> /* for linux/serial_core.h */
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <asm/time.h>
#include <asm/mpc85xx.h>
#include <asm/immap_85xx.h>
#include <asm/mmu.h>
#include <asm/ppc_sys.h>
#include <asm/kgdb.h>
#include <asm/machdep.h>
#include <syslib/ppc85xx_setup.h>
extern void abort(void);
/* Return the amount of memory */
unsigned long __init
mpc85xx_find_end_of_memory(void)
{
bd_t *binfo;
binfo = (bd_t *) __res;
return binfo->bi_memsize;
}
/* The decrementer counts at the system (internal) clock freq divided by 8 */
void __init
mpc85xx_calibrate_decr(void)
{
bd_t *binfo = (bd_t *) __res;
unsigned int freq, divisor;
/* get the core frequency */
freq = binfo->bi_busfreq;
/* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */
divisor = 8;
tb_ticks_per_jiffy = freq / divisor / HZ;
tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
/* Set the time base to zero */
mtspr(SPRN_TBWL, 0);
mtspr(SPRN_TBWU, 0);
/* Clear any pending timer interrupts */
mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
/* Enable decrementer interrupt */
mtspr(SPRN_TCR, TCR_DIE);
}
#ifdef CONFIG_SERIAL_8250
void __init
mpc85xx_early_serial_map(void)
{
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
struct uart_port serial_req;
#endif
struct plat_serial8250_port *pdata;
bd_t *binfo = (bd_t *) __res;
pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART);
/* Setup serial port access */
pdata[0].uartclk = binfo->bi_busfreq;
pdata[0].mapbase += binfo->bi_immr_base;
pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE);
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
memset(&serial_req, 0, sizeof (serial_req));
serial_req.iotype = UPIO_MEM;
serial_req.mapbase = pdata[0].mapbase;
serial_req.membase = pdata[0].membase;
serial_req.regshift = 0;
gen550_init(0, &serial_req);
#endif
pdata[1].uartclk = binfo->bi_busfreq;
pdata[1].mapbase += binfo->bi_immr_base;
pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE);
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
/* Assume gen550_init() doesn't modify serial_req */
serial_req.mapbase = pdata[1].mapbase;
serial_req.membase = pdata[1].membase;
gen550_init(1, &serial_req);
#endif
}
#endif
void
mpc85xx_restart(char *cmd)
{
local_irq_disable();
abort();
}
void
mpc85xx_power_off(void)
{
local_irq_disable();
for(;;);
}
void
mpc85xx_halt(void)
{
local_irq_disable();
for(;;);
}
#ifdef CONFIG_PCI
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
#endif
static void __init
mpc85xx_setup_pci1(struct pci_controller *hose)
{
volatile struct ccsr_pci *pci;
volatile struct ccsr_guts *guts;
unsigned short temps;
bd_t *binfo = (bd_t *) __res;
pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET,
MPC85xx_PCI1_SIZE);
guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET,
MPC85xx_GUTS_SIZE);
early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps);
temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
early_write_config_word(hose, 0, 0, PCI_COMMAND, temps);
#define PORDEVSR_PCI (0x00800000) /* PCI Mode */
if (guts->pordevsr & PORDEVSR_PCI) {
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
} else {
/* PCI-X init */
temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps);
}
/* Disable all windows (except powar0 since its ignored) */
pci->powar1 = 0;
pci->powar2 = 0;
pci->powar3 = 0;
pci->powar4 = 0;
pci->piwar1 = 0;
pci->piwar2 = 0;
pci->piwar3 = 0;
/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */
pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
pci->potear1 = 0x00000000;
pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff;
/* Enable, Mem R/W */
pci->powar1 = 0x80044000 |
(__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1);
/* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */
pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff;
/* Enable, IO R/W */
pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1);
/* Setup 2G inbound Memory Window @ 0 */
pci->pitar1 = 0x00000000;
pci->piwbar1 = 0x00000000;
pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local
Mem, Snoop R/W, 2G */
}
extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin);
extern int mpc85xx_exclude_device(u_char bus, u_char devfn);
#ifdef CONFIG_85xx_PCI2
static void __init
mpc85xx_setup_pci2(struct pci_controller *hose)
{
volatile struct ccsr_pci *pci;
unsigned short temps;
bd_t *binfo = (bd_t *) __res;
pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET,
MPC85xx_PCI2_SIZE);
early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps);
temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps);
early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80);
/* Disable all windows (except powar0 since its ignored) */
pci->powar1 = 0;
pci->powar2 = 0;
pci->powar3 = 0;
pci->powar4 = 0;
pci->piwar1 = 0;
pci->piwar2 = 0;
pci->piwar3 = 0;
/* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */
pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
pci->potear1 = 0x00000000;
pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff;
/* Enable, Mem R/W */
pci->powar1 = 0x80044000 |
(__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1);
/* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */
pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff;;
pci->potear2 = 0x00000000;
pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff;
/* Enable, IO R/W */
pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1);
/* Setup 2G inbound Memory Window @ 0 */
pci->pitar1 = 0x00000000;
pci->piwbar1 = 0x00000000;
pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local
Mem, Snoop R/W, 2G */
}
#endif /* CONFIG_85xx_PCI2 */
int mpc85xx_pci1_last_busno = 0;
void __init
mpc85xx_setup_hose(void)
{
struct pci_controller *hose_a;
#ifdef CONFIG_85xx_PCI2
struct pci_controller *hose_b;
#endif
bd_t *binfo = (bd_t *) __res;
hose_a = pcibios_alloc_controller();
if (!hose_a)
return;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = mpc85xx_map_irq;
hose_a->first_busno = 0;
hose_a->bus_offset = 0;
hose_a->last_busno = 0xff;
setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
hose_a->set_cfg_type = 1;
mpc85xx_setup_pci1(hose_a);
hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET;
hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM;
hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM;
hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO;
hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO;
hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE;
#ifdef CONFIG_85xx_PCI2
hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE,
MPC85XX_PCI1_IO_SIZE +
MPC85XX_PCI2_IO_SIZE);
#else
hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE,
MPC85XX_PCI1_IO_SIZE);
#endif
isa_io_base = (unsigned long)hose_a->io_base_virt;
/* setup resources */
pci_init_resource(&hose_a->mem_resources[0],
MPC85XX_PCI1_LOWER_MEM,
MPC85XX_PCI1_UPPER_MEM,
IORESOURCE_MEM, "PCI1 host bridge");
pci_init_resource(&hose_a->io_resource,
MPC85XX_PCI1_LOWER_IO,
MPC85XX_PCI1_UPPER_IO,
IORESOURCE_IO, "PCI1 host bridge");
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
/* Pre pciauto_bus_scan VIA init */
mpc85xx_cds_enable_via(hose_a);
#endif
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
/* Post pciauto_bus_scan VIA fixup */
mpc85xx_cds_fixup_via(hose_a);
#endif
#ifdef CONFIG_85xx_PCI2
hose_b = pcibios_alloc_controller();
if (!hose_b)
return;
hose_b->bus_offset = hose_a->last_busno + 1;
hose_b->first_busno = hose_a->last_busno + 1;
hose_b->last_busno = 0xff;
setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
hose_b->set_cfg_type = 1;
mpc85xx_setup_pci2(hose_b);
hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET;
hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM;
hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM;
hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO;
hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO;
hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE;
hose_b->io_base_virt = hose_a->io_base_virt + MPC85XX_PCI1_IO_SIZE;
/* setup resources */
pci_init_resource(&hose_b->mem_resources[0],
MPC85XX_PCI2_LOWER_MEM,
MPC85XX_PCI2_UPPER_MEM,
IORESOURCE_MEM, "PCI2 host bridge");
pci_init_resource(&hose_b->io_resource,
MPC85XX_PCI2_LOWER_IO,
MPC85XX_PCI2_UPPER_IO,
IORESOURCE_IO, "PCI2 host bridge");
hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno);
/* let board code know what the last bus number was on PCI1 */
mpc85xx_pci1_last_busno = hose_a->last_busno;
#endif
return;
}
#endif /* CONFIG_PCI */
|