path: root/drivers/input/keyboard/mxc_keyb.c

/*
 * Copyright 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
 */

/*
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/*!
 * @file mxc_keyb.c
 *
 * @brief Driver for the Freescale Semiconductor MXC keypad port.
 *
 * The keypad driver is designed as a standard Input driver which interacts
 * with low level keypad port hardware. Upon opening, the Keypad driver
 * initializes the keypad port. When the keypad interrupt happens the driver
 * calles keypad polling timer and scans the keypad matrix for key
 * press/release. If all key press/release happened it comes out of timer and
 * waits for key press interrupt. The scancode for key press and release events
 * are passed to Input subsytem.
 *
 * @ingroup keypad
 */

/*!
 * Comment KPP_DEBUG to disable debug messages
 */
#define KPP_DEBUG        0

#if KPP_DEBUG
#define	DEBUG
#include <linux/kernel.h>
#endif

#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <mach/hardware.h>
#include <linux/kd.h>
#include <linux/fs.h>
#include <linux/kbd_kern.h>
#include <linux/ioctl.h>
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/input.h>
#include <linux/miscdevice.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/mach/keypad.h>

/*!
 * Keypad Module Name
 */
#define MOD_NAME  "mxckpd"

/*!
 * XLATE mode selection
 */
#define KEYPAD_XLATE        0

/*!
 * RAW mode selection
 */
#define KEYPAD_RAW          1

/*!
 * Maximum number of keys.
 */
#define MAXROW			8
#define MAXCOL			8
#define MXC_MAXKEY		(MAXROW * MAXCOL)

/*!
 * This define indicates break scancode for every key release. A constant
 * of 128 is added to the key press scancode.
 */
#define  MXC_KEYRELEASE   128

/*
 * _reg_KPP_KPCR   _reg_KPP_KPSR _reg_KPP_KDDR _reg_KPP_KPDR
 *  The offset of Keypad Control Register Address
 */
#define KPCR    0x00

/*
 * The offset of Keypad Status Register Address
 */
#define KPSR    0x02

/*
 * The offset of Keypad Data Direction Address
 */
#define KDDR   0x04

/*
 * The offset of Keypad Data Register
 */
#define KPDR    0x06

/*
 * Key Press Interrupt Status bit
 */
#define KBD_STAT_KPKD        0x01

/*
 * Key Release Interrupt Status bit
 */
#define KBD_STAT_KPKR        0x02

/*
 * Key Depress Synchronizer Chain Status bit
 */
#define KBD_STAT_KDSC        0x04

/*
 * Key Release Synchronizer Status bit
 */
#define KBD_STAT_KRSS        0x08

/*
 * Key Depress Interrupt Enable Status bit
 */
#define KBD_STAT_KDIE        0x100

/*
 * Key Release Interrupt Enable
 */
#define KBD_STAT_KRIE        0x200

/*
 * Keypad Clock Enable
 */
#define KBD_STAT_KPPEN       0x400

/*!
 * Buffer size of keypad queue. Should be a power of 2.
 */
#define KPP_BUF_SIZE    128

/*!
 * Test whether bit is set for integer c
 */
#define TEST_BIT(c, n) ((c) & (0x1 << (n)))

/*!
 * Set nth bit in the integer c
 */
#define BITSET(c, n)   ((c) | (1 << (n)))

/*!
 * Reset nth bit in the integer c
 */
#define BITRESET(c, n) ((c) & ~(1 << (n)))

/*!
 * This enum represents the keypad state machine to maintain debounce logic
 * for key press/release.
 */
enum KeyState {

	/*!
	 * Key press state.
	 */
	KStateUp,

	/*!
	 * Key press debounce state.
	 */
	KStateFirstDown,

	/*!
	 * Key release state.
	 */
	KStateDown,

	/*!
	 * Key release debounce state.
	 */
	KStateFirstUp
};

/*!
 * Keypad Private Data Structure
 */
struct keypad_priv {

	/*!
	 * Keypad state machine.
	 */
	enum KeyState iKeyState;

	/*!
	 * Number of rows configured in the keypad matrix
	 */
	unsigned long kpp_rows;

	/*!
	 * Number of Columns configured in the keypad matrix
	 */
	unsigned long kpp_cols;

	/*!
	 * Timer used for Keypad polling.
	 */
	struct timer_list poll_timer;

	/*!
	 * The base address
	 */
	void __iomem *base;
};
/*!
 * This structure holds the keypad private data structure.
 */
static struct keypad_priv kpp_dev;

/*! Indicates if the key pad device is enabled. */
static unsigned int key_pad_enabled;

/*! Input device structure. */
static struct input_dev *mxckbd_dev = NULL;

/*! KPP clock handle. */
static struct clk *kpp_clk;

/*! This static variable indicates whether a key event is pressed/released. */
static unsigned short KPress;

/*! cur_rcmap and prev_rcmap array is used to detect key press and release. */
static unsigned short *cur_rcmap;	/* max 64 bits (8x8 matrix) */
static unsigned short *prev_rcmap;

/*!
 * Debounce polling period(10ms) in system ticks.
 */
static unsigned short KScanRate = (10 * HZ) / 1000;

static struct keypad_data *keypad;

static int has_leaning_key;
/*!
 * These arrays are used to store press and release scancodes.
 */
static short **press_scancode;
static short **release_scancode;

static const unsigned short *mxckpd_keycodes;
static unsigned short mxckpd_keycodes_size;

#define press_left_code     30
#define press_right_code    29
#define press_up_code       28
#define press_down_code     27

#define rel_left_code       158
#define rel_right_code      157
#define rel_up_code         156
#define rel_down_code       155
/*!
 * These functions are used to configure and the GPIO pins for keypad to
 * activate and deactivate it.
 */
extern void gpio_keypad_active(void);
extern void gpio_keypad_inactive(void);

/*!
 * This function is called for generating scancodes for key press and
 * release on keypad for the board.
 *
 *  @param   row        Keypad row pressed on the keypad matrix.
 *  @param   col        Keypad col pressed on the keypad matrix.
 *  @param   press      Indicated key press/release.
 *
 *  @return     Key press/release Scancode.
 */
static signed short mxc_scan_matrix_leaning_key(int row, int col, int press)
{
	static unsigned first_row;
	static unsigned first_set = 0, flag = 0;
	signed short scancode = -1;

	if (press) {
		if ((3 == col) && ((3 == row) ||
				   (4 == row) || (5 == row) || (6 == row))) {
			if (first_set == 0) {
				first_set = 1;
				first_row = row;
			} else {
				first_set = 0;
				if (((first_row == 6) || (first_row == 3))
				    && ((row == 6) || (row == 3)))
					scancode = press_down_code;
				else if (((first_row == 3) || (first_row == 5))
					 && ((row == 3) || (row == 5)))
					scancode = press_left_code;
				else if (((first_row == 6) || (first_row == 4))
					 && ((row == 6) || (row == 4)))
					scancode = press_right_code;
				else if (((first_row == 4) || (first_row == 5))
					 && ((row == 4) || (row == 5)))
					scancode = press_up_code;
				KPress = 1;
				kpp_dev.iKeyState = KStateUp;
				pr_debug("Press (%d, %d) scan=%d Kpress=%d\n",
					 row, col, scancode, KPress);
			}
		} else {
			/*
			 * check for other keys only
			 * if the cursor key presses
			 * are not detected may be
			 * this needs better logic
			 */
			if ((0 == (cur_rcmap[3] & BITSET(0, 3))) &&
			    (0 == (cur_rcmap[4] & BITSET(0, 3))) &&
			    (0 == (cur_rcmap[5] & BITSET(0, 3))) &&
			    (0 == (cur_rcmap[6] & BITSET(0, 3)))) {
				scancode = ((col * kpp_dev.kpp_rows) + row);
				KPress = 1;
				kpp_dev.iKeyState = KStateUp;
				flag = 1;
				pr_debug("Press (%d, %d) scan=%d Kpress=%d\n",
					 row, col, scancode, KPress);
			}
		}
	} else {
		if ((flag == 0) && (3 == col)
		    && ((3 == row) || (4 == row) || (5 == row)
			|| (6 == row))) {
			if (first_set == 0) {
				first_set = 1;
				first_row = row;
			} else {
				first_set = 0;
				if (((first_row == 6) || (first_row == 3))
				    && ((row == 6) || (row == 3)))
					scancode = rel_down_code;
				else if (((first_row == 3) || (first_row == 5))
					 && ((row == 3) || (row == 5)))
					scancode = rel_left_code;
				else if (((first_row == 6) || (first_row == 4))
					 && ((row == 6) || (row == 4)))
					scancode = rel_right_code;
				else if (((first_row == 4) || (first_row == 5))
					 && ((row == 4) || (row == 5)))
					scancode = rel_up_code;
				KPress = 0;
				kpp_dev.iKeyState = KStateDown;
				pr_debug("Release (%d, %d) scan=%d Kpress=%d\n",
					 row, col, scancode, KPress);
			}
		} else {
			/*
			 * check for other keys only
			 * if the cursor key presses
			 * are not detected may be
			 * this needs better logic
			 */
			if ((0 == (prev_rcmap[3] & BITSET(0, 3))) &&
			    (0 == (prev_rcmap[4] & BITSET(0, 3))) &&
			    (0 == (cur_rcmap[5] & BITSET(0, 3))) &&
			    (0 == (cur_rcmap[6] & BITSET(0, 3)))) {
				scancode = ((col * kpp_dev.kpp_rows) + row) +
				    MXC_KEYRELEASE;
				KPress = 0;
				flag = 0;
				kpp_dev.iKeyState = KStateDown;
				pr_debug("Release (%d, %d) scan=%d Kpress=%d\n",
					 row, col, scancode, KPress);
			}
		}
	}
	return scancode;
}

/*!
 * This function is called to scan the keypad matrix to find out the key press
 * and key release events. Make scancode and break scancode are generated for
 * key press and key release events.
 *
 * The following scanning sequence are done for
 * keypad row and column scanning,
 * -# Write 1's to KPDR[15:8], setting column data to 1's
 * -# Configure columns as totem pole outputs(for quick discharging of keypad
 * capacitance)
 * -# Configure columns as open-drain
 * -# Write a single column to 0, others to 1.
 * -# Sample row inputs and save data. Multiple key presses can be detected on
 * a single column.
 * -# Repeat steps the above steps for remaining columns.
 * -# Return all columns to 0 in preparation for standby mode.
 * -# Clear KPKD and KPKR status bit(s) by writing to a 1,
 *    Set the KPKR synchronizer chain by writing "1" to KRSS register,
 *    Clear the KPKD synchronizer chain by writing "1" to KDSC register
 *
 * @result    Number of key pressed/released.
 */
static int mxc_kpp_scan_matrix(void)
{
	unsigned short reg_val;
	int col, row;
	short scancode = 0;
	int keycnt = 0;		/* How many keys are still pressed */

	/*
	 * wmb() linux kernel function which guarantees orderings in write
	 * operations
	 */
	wmb();

	/* save cur keypad matrix to prev */

	memcpy(prev_rcmap, cur_rcmap, kpp_dev.kpp_rows * sizeof(prev_rcmap[0]));
	memset(cur_rcmap, 0, kpp_dev.kpp_rows * sizeof(cur_rcmap[0]));

	for (col = 0; col < kpp_dev.kpp_cols; col++) {	/* Col */
		/* 2. Write 1.s to KPDR[15:8] setting column data to 1.s */
		reg_val = __raw_readw(kpp_dev.base + KPDR);
		reg_val |= 0xff00;
		__raw_writew(reg_val, kpp_dev.base + KPDR);

		/*
		 * 3. Configure columns as totem pole outputs(for quick
		 * discharging of keypad capacitance)
		 */
		reg_val = __raw_readw(kpp_dev.base + KPCR);
		reg_val &= 0x00ff;
		__raw_writew(reg_val, kpp_dev.base + KPCR);

		udelay(2);

		/*
		 * 4. Configure columns as open-drain
		 */
		reg_val = __raw_readw(kpp_dev.base + KPCR);
		reg_val |= ((1 << kpp_dev.kpp_cols) - 1) << 8;
		__raw_writew(reg_val, kpp_dev.base + KPCR);

		/*
		 * 5. Write a single column to 0, others to 1.
		 * 6. Sample row inputs and save data. Multiple key presses
		 * can be detected on a single column.
		 * 7. Repeat steps 2 - 6 for remaining columns.
		 */

		/* Col bit starts at 8th bit in KPDR */
		reg_val = __raw_readw(kpp_dev.base + KPDR);
		reg_val &= ~(1 << (8 + col));
		__raw_writew(reg_val, kpp_dev.base + KPDR);

		/* Delay added to avoid propagating the 0 from column to row
		 * when scanning. */

		udelay(5);

		/* Read row input */
		reg_val = __raw_readw(kpp_dev.base + KPDR);
		for (row = 0; row < kpp_dev.kpp_rows; row++) {	/* sample row */
			if (TEST_BIT(reg_val, row) == 0) {
				cur_rcmap[row] = BITSET(cur_rcmap[row], col);
				keycnt++;
			}
		}
	}

	/*
	 * 8. Return all columns to 0 in preparation for standby mode.
	 * 9. Clear KPKD and KPKR status bit(s) by writing to a .1.,
	 * set the KPKR synchronizer chain by writing "1" to KRSS register,
	 * clear the KPKD synchronizer chain by writing "1" to KDSC register
	 */
	reg_val = 0x00;
	__raw_writew(reg_val, kpp_dev.base + KPDR);
	reg_val = __raw_readw(kpp_dev.base + KPDR);
	reg_val = __raw_readw(kpp_dev.base + KPSR);
	reg_val |= KBD_STAT_KPKD | KBD_STAT_KPKR | KBD_STAT_KRSS |
	    KBD_STAT_KDSC;
	__raw_writew(reg_val, kpp_dev.base + KPSR);

	/* Check key press status change */

	/*
	 * prev_rcmap array will contain the previous status of the keypad
	 * matrix.  cur_rcmap array will contains the present status of the
	 * keypad matrix. If a bit is set in the array, that (row, col) bit is
	 * pressed, else it is not pressed.
	 *
	 * XORing these two variables will give us the change in bit for
	 * particular row and column.  If a bit is set in XOR output, then that
	 * (row, col) has a change of status from the previous state.  From
	 * the diff variable the key press and key release of row and column
	 * are found out.
	 *
	 * If the key press is determined then scancode for key pressed
	 * can be generated using the following statement:
	 *    scancode = ((row * 8) + col);
	 *
	 * If the key release is determined then scancode for key release
	 * can be generated using the following statement:
	 *    scancode = ((row * 8) + col) + MXC_KEYRELEASE;
	 */
	for (row = 0; row < kpp_dev.kpp_rows; row++) {
		unsigned char diff;

		/*
		 * Calculate the change in the keypad row status
		 */
		diff = prev_rcmap[row] ^ cur_rcmap[row];

		for (col = 0; col < kpp_dev.kpp_cols; col++) {
			if ((diff >> col) & 0x1) {
				/* There is a status change on col */
				if ((prev_rcmap[row] & BITSET(0, col)) == 0) {
					/*
					 * Previous state is 0, so now
					 * a key is pressed
					 */
					if (has_leaning_key) {
						scancode =
						    mxc_scan_matrix_leaning_key
						    (row, col, 1);
					} else {
						scancode =
						    ((row * kpp_dev.kpp_cols) +
						     col);
						KPress = 1;
						kpp_dev.iKeyState = KStateUp;
					}
					pr_debug("Press   (%d, %d) scan=%d "
						 "Kpress=%d\n",
						 row, col, scancode, KPress);
					press_scancode[row][col] =
					    (short)scancode;
				} else {
					/*
					 * Previous state is not 0, so
					 * now a key is released
					 */
					if (has_leaning_key) {
						scancode =
						    mxc_scan_matrix_leaning_key
						    (row, col, 0);
					} else {
						scancode =
						    (row * kpp_dev.kpp_cols) +
						    col + MXC_KEYRELEASE;
						KPress = 0;
						kpp_dev.iKeyState = KStateDown;
					}

					pr_debug
					    ("Release (%d, %d) scan=%d Kpress=%d\n",
					     row, col, scancode, KPress);
					release_scancode[row][col] =
					    (short)scancode;
					keycnt++;
				}
			}
		}
	}

	/*
	 * This switch case statement is the
	 * implementation of state machine of debounce
	 * logic for key press/release.
	 * The explaination of state machine is as
	 * follows:
	 *
	 * KStateUp State:
	 * This is in intial state of the state machine
	 * this state it checks for any key presses.
	 * The key press can be checked using the
	 * variable KPress. If KPress is set, then key
	 * press is identified and switches the to
	 * KStateFirstDown state for key press to
	 * debounce.
	 *
	 * KStateFirstDown:
	 * After debounce delay(10ms), if the KPress is
	 * still set then pass scancode generated to
	 * input device and change the state to
	 * KStateDown, else key press debounce is not
	 * satisfied so change the state to KStateUp.
	 *
	 * KStateDown:
	 * In this state it checks for any key release.
	 * If KPress variable is cleared, then key
	 * release is indicated and so, switch the
	 * state to KStateFirstUp else to state
	 * KStateDown.
	 *
	 * KStateFirstUp:
	 * After debounce delay(10ms), if the KPress is
	 * still reset then pass the key release
	 * scancode to input device and change
	 * the state to KStateUp else key release is
	 * not satisfied so change the state to
	 * KStateDown.
	 */
	switch (kpp_dev.iKeyState) {
	case KStateUp:
		if (KPress) {
			/* First Down (must debounce). */
			kpp_dev.iKeyState = KStateFirstDown;
		} else {
			/* Still UP.(NO Changes) */
			kpp_dev.iKeyState = KStateUp;
		}
		break;

	case KStateFirstDown:
		if (KPress) {
			for (row = 0; row < kpp_dev.kpp_rows; row++) {
				for (col = 0; col < kpp_dev.kpp_cols; col++) {
					if ((press_scancode[row][col] != -1)) {
						/* Still Down, so add scancode */
						scancode =
						    press_scancode[row][col];
						input_event(mxckbd_dev, EV_KEY,
							    mxckpd_keycodes
							    [scancode], 1);
						if (mxckpd_keycodes[scancode] ==
						    KEY_LEFTSHIFT) {
							input_event(mxckbd_dev,
								    EV_KEY,
								    KEY_3, 1);
						}
						kpp_dev.iKeyState = KStateDown;
						press_scancode[row][col] = -1;
					}
				}
			}
		} else {
			/* Just a bounce */
			kpp_dev.iKeyState = KStateUp;
		}
		break;

	case KStateDown:
		if (KPress) {
			/* Still down (no change) */
			kpp_dev.iKeyState = KStateDown;
		} else {
			/* First Up. Must debounce */
			kpp_dev.iKeyState = KStateFirstUp;
		}
		break;

	case KStateFirstUp:
		if (KPress) {
			/* Just a bounce */
			kpp_dev.iKeyState = KStateDown;
		} else {
			for (row = 0; row < kpp_dev.kpp_rows; row++) {
				for (col = 0; col < kpp_dev.kpp_cols; col++) {
					if ((release_scancode[row][col] != -1)) {
						scancode =
						    release_scancode[row][col];
						scancode =
						    scancode - MXC_KEYRELEASE;
						input_event(mxckbd_dev, EV_KEY,
							    mxckpd_keycodes
							    [scancode], 0);
						if (mxckpd_keycodes[scancode] ==
						    KEY_LEFTSHIFT) {
							input_event(mxckbd_dev,
								    EV_KEY,
								    KEY_3, 0);
						}
						kpp_dev.iKeyState = KStateUp;
						release_scancode[row][col] = -1;
					}
				}
			}
		}
		break;

	default:
		return -EBADRQC;
		break;
	}

	return keycnt;
}

/*!
 * This function is called to start the timer for scanning the keypad if there
 * is any key press. Currently this interval is  set to 10 ms. When there are
 * no keys pressed on the keypad we return back, waiting for a keypad key
 * press interrupt.
 *
 * @param data  Opaque data passed back by kernel. Not used.
 */
static void mxc_kpp_handle_timer(unsigned long data)
{
	unsigned short reg_val;
	int i;

	if (key_pad_enabled == 0) {
		return;
	}
	if (mxc_kpp_scan_matrix() == 0) {
		/*
		 * Stop scanning and wait for interrupt.
		 * Enable press interrupt and disable release interrupt.
		 */
		__raw_writew(0x00FF, kpp_dev.base + KPDR);
		reg_val = __raw_readw(kpp_dev.base + KPSR);
		reg_val |= (KBD_STAT_KPKR | KBD_STAT_KPKD);
		reg_val |= KBD_STAT_KRSS | KBD_STAT_KDSC;
		__raw_writew(reg_val, kpp_dev.base + KPSR);
		reg_val |= KBD_STAT_KDIE;
		reg_val &= ~KBD_STAT_KRIE;
		__raw_writew(reg_val, kpp_dev.base + KPSR);

		/*
		 * No more keys pressed... make sure unwanted key codes are
		 * not given upstairs
		 */
		for (i = 0; i < kpp_dev.kpp_rows; i++) {
			memset(press_scancode[i], -1,
			       sizeof(press_scancode[0][0]) * kpp_dev.kpp_cols);
			memset(release_scancode[i], -1,
			       sizeof(release_scancode[0][0]) *
			       kpp_dev.kpp_cols);
		}
		return;
	}

	/*
	 * There are still some keys pressed, continue to scan.
	 * We shall scan again in 10 ms. This has to be tuned according
	 * to the requirement.
	 */
	kpp_dev.poll_timer.expires = jiffies + KScanRate;
	kpp_dev.poll_timer.function = mxc_kpp_handle_timer;
	add_timer(&kpp_dev.poll_timer);
}

/*!
 * This function is the keypad Interrupt handler.
 * This function checks for keypad status register (KPSR) for key press
 * and interrupt. If key press interrupt has occurred, then the key
 * press interrupt in the KPSR are disabled.
 * It then calls mxc_kpp_scan_matrix to check for any key pressed/released.
 * If any key is found to be pressed, then a timer is set to call
 * mxc_kpp_scan_matrix function for every 10 ms.
 *
 * @param   irq      The Interrupt number
 * @param   dev_id   Driver private data
 *
 * @result    The function returns \b IRQ_RETVAL(1) if interrupt was handled,
 *            returns \b IRQ_RETVAL(0) if the interrupt was not handled.
 *            \b IRQ_RETVAL is defined in include/linux/interrupt.h.
 */
static irqreturn_t mxc_kpp_interrupt(int irq, void *dev_id)
{
	unsigned short reg_val;

	/* Delete the polling timer */
	del_timer(&kpp_dev.poll_timer);
	reg_val = __raw_readw(kpp_dev.base + KPSR);

	/* Check if it is key press interrupt */
	if (reg_val & KBD_STAT_KPKD) {
		/*
		 * Disable key press(KDIE status bit) interrupt
		 */
		reg_val &= ~KBD_STAT_KDIE;
		__raw_writew(reg_val, kpp_dev.base + KPSR);
	} else {
		/* spurious interrupt */
		return IRQ_RETVAL(0);
	}
	/*
	 * Check if any keys are pressed, if so start polling.
	 */
	mxc_kpp_handle_timer(0);

	return IRQ_RETVAL(1);
}

/*!
 * This function is called when the keypad driver is opened.
 * Since keypad initialization is done in __init, nothing is done in open.
 *
 * @param    dev    Pointer to device inode
 *
 * @result    The function always return 0
 */
static int mxc_kpp_open(struct input_dev *dev)
{
	return 0;
}

/*!
 * This function is called close the keypad device.
 * Nothing is done in this function, since every thing is taken care in
 * __exit function.
 *
 * @param    dev    Pointer to device inode
 *
 */
static void mxc_kpp_close(struct input_dev *dev)
{
}

#ifdef CONFIG_PM
/*!
 * This function puts the Keypad controller in low-power mode/state.
 * If Keypad is enabled as a wake source(i.e. it can resume the system
 * from suspend mode), the Keypad controller doesn't enter low-power state.
 *
 * @param   pdev  the device structure used to give information on Keypad
 *                to suspend
 * @param   state the power state the device is entering
 *
 * @return  return -1 when the keypad is pressed. Otherwise, return 0
 */
static int mxc_kpp_suspend(struct platform_device *pdev, pm_message_t state)
{
	/* When the keypad is still pressed, clean up registers and timers */
	if (timer_pending(&kpp_dev.poll_timer))
		return -1;

	if (device_may_wakeup(&pdev->dev)) {
		enable_irq_wake(keypad->irq);
	} else {
		disable_irq(keypad->irq);
		key_pad_enabled = 0;
		clk_disable(kpp_clk);
		gpio_keypad_inactive();
	}

	return 0;
}

/*!
 * This function brings the Keypad controller back from low-power state.
 * If Keypad is enabled as a wake source(i.e. it can resume the system
 * from suspend mode), the Keypad controller doesn't enter low-power state.
 *
 * @param   pdev  the device structure used to give information on Keypad
 *                to resume
 *
 * @return  The function always returns 0.
 */
static int mxc_kpp_resume(struct platform_device *pdev)
{
	if (device_may_wakeup(&pdev->dev)) {
		disable_irq_wake(keypad->irq);
	} else {
		gpio_keypad_active();
		clk_enable(kpp_clk);
		key_pad_enabled = 1;
		enable_irq(keypad->irq);
	}

	return 0;
}

#else
#define mxc_kpp_suspend  NULL
#define mxc_kpp_resume   NULL
#endif				/* CONFIG_PM */

/*!
 * This function is called to free the allocated memory for local arrays
 */
static void mxc_kpp_free_allocated(void)
{

	int i;

	if (press_scancode) {
		for (i = 0; i < kpp_dev.kpp_rows; i++) {
			if (press_scancode[i])
				kfree(press_scancode[i]);
		}
		kfree(press_scancode);
	}

	if (release_scancode) {
		for (i = 0; i < kpp_dev.kpp_rows; i++) {
			if (release_scancode[i])
				kfree(release_scancode[i]);
		}
		kfree(release_scancode);
	}

	if (cur_rcmap)
		kfree(cur_rcmap);

	if (prev_rcmap)
		kfree(prev_rcmap);

	if (mxckbd_dev)
		input_free_device(mxckbd_dev);
}

/*!
 * This function is called during the driver binding process.
 *
 * @param   pdev  the device structure used to store device specific
 *                information that is used by the suspend, resume and remove
 *                functions.
 *
 * @return  The function returns 0 on successful registration. Otherwise returns
 *          specific error code.
 */
static int mxc_kpp_probe(struct platform_device *pdev)
{
	int i, irq;
	int retval;
	unsigned int reg_val;
	struct resource *res;

	keypad = (struct keypad_data *)pdev->dev.platform_data;

	kpp_dev.kpp_cols = keypad->colmax;
	kpp_dev.kpp_rows = keypad->rowmax;
	key_pad_enabled = 0;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	kpp_dev.base = ioremap(res->start, res->end - res->start + 1);
	if (!kpp_dev.base)
		return -ENOMEM;

	irq = platform_get_irq(pdev, 0);
	keypad->irq = irq;

	/* Enable keypad clock */
	kpp_clk = clk_get(&pdev->dev, "kpp_clk");
	clk_enable(kpp_clk);

	/* IOMUX configuration for keypad */
	gpio_keypad_active();

	/* Configure keypad */

	/* Enable number of rows in keypad (KPCR[7:0])
	 * Configure keypad columns as open-drain (KPCR[15:8])
	 *
	 * Configure the rows/cols in KPP
	 * LSB nibble in KPP is for 8 rows
	 * MSB nibble in KPP is for 8 cols
	 */
	reg_val = __raw_readw(kpp_dev.base + KPCR);
	reg_val |= (1 << keypad->rowmax) - 1;	/* LSB */
	reg_val |= ((1 << keypad->colmax) - 1) << 8;	/* MSB */
	__raw_writew(reg_val, kpp_dev.base + KPCR);

	/* Write 0's to KPDR[15:8] */
	reg_val = __raw_readw(kpp_dev.base + KPDR);
	reg_val &= 0x00ff;
	__raw_writew(reg_val, kpp_dev.base + KPDR);

	/* Configure columns as output, rows as input (KDDR[15:0]) */
	reg_val = __raw_readw(kpp_dev.base + KDDR);
	reg_val |= 0xff00;
	reg_val &= 0xff00;
	__raw_writew(reg_val, kpp_dev.base + KDDR);

	reg_val = __raw_readw(kpp_dev.base + KPSR);
	reg_val &= ~(KBD_STAT_KPKR | KBD_STAT_KPKD);
	reg_val |= KBD_STAT_KPKD;
	reg_val |= KBD_STAT_KRSS | KBD_STAT_KDSC;
	__raw_writew(reg_val, kpp_dev.base + KPSR);
	reg_val |= KBD_STAT_KDIE;
	reg_val &= ~KBD_STAT_KRIE;
	__raw_writew(reg_val, kpp_dev.base + KPSR);

	has_leaning_key = keypad->learning;
	mxckpd_keycodes = keypad->matrix;
	mxckpd_keycodes_size = keypad->rowmax * keypad->colmax;

	if ((keypad->matrix == (void *)0)
	    || (mxckpd_keycodes_size == 0)) {
		retval = -ENODEV;
		goto err1;
	}

	mxckbd_dev = input_allocate_device();
	if (!mxckbd_dev) {
		printk(KERN_ERR
		       "mxckbd_dev: not enough memory for input device\n");
		retval = -ENOMEM;
		goto err1;
	}

	mxckbd_dev->keycode = (void *)mxckpd_keycodes;
	mxckbd_dev->keycodesize = sizeof(mxckpd_keycodes[0]);
	mxckbd_dev->keycodemax = mxckpd_keycodes_size;
	mxckbd_dev->name = "mxckpd";
	mxckbd_dev->id.bustype = BUS_HOST;
	mxckbd_dev->open = mxc_kpp_open;
	mxckbd_dev->close = mxc_kpp_close;

	retval = input_register_device(mxckbd_dev);
	if (retval < 0) {
		printk(KERN_ERR
		       "mxckbd_dev: failed to register input device\n");
		goto err2;
	}

	/* allocate required memory */
	press_scancode = kmalloc(kpp_dev.kpp_rows * sizeof(press_scancode[0]),
				 GFP_KERNEL);
	release_scancode =
	    kmalloc(kpp_dev.kpp_rows * sizeof(release_scancode[0]), GFP_KERNEL);

	if (!press_scancode || !release_scancode) {
		retval = -ENOMEM;
		goto err3;
	}

	for (i = 0; i < kpp_dev.kpp_rows; i++) {
		press_scancode[i] = kmalloc(kpp_dev.kpp_cols
					    * sizeof(press_scancode[0][0]),
					    GFP_KERNEL);
		release_scancode[i] =
		    kmalloc(kpp_dev.kpp_cols * sizeof(release_scancode[0][0]),
			    GFP_KERNEL);

		if (!press_scancode[i] || !release_scancode[i]) {
			retval = -ENOMEM;
			goto err3;
		}
	}

	cur_rcmap =
	    kmalloc(kpp_dev.kpp_rows * sizeof(cur_rcmap[0]), GFP_KERNEL);
	prev_rcmap =
	    kmalloc(kpp_dev.kpp_rows * sizeof(prev_rcmap[0]), GFP_KERNEL);

	if (!cur_rcmap || !prev_rcmap) {
		retval = -ENOMEM;
		goto err3;
	}

	__set_bit(EV_KEY, mxckbd_dev->evbit);

	for (i = 0; i < mxckpd_keycodes_size; i++)
		__set_bit(mxckpd_keycodes[i], mxckbd_dev->keybit);

	for (i = 0; i < kpp_dev.kpp_rows; i++) {
		memset(press_scancode[i], -1,
		       sizeof(press_scancode[0][0]) * kpp_dev.kpp_cols);
		memset(release_scancode[i], -1,
		       sizeof(release_scancode[0][0]) * kpp_dev.kpp_cols);
	}
	memset(cur_rcmap, 0, kpp_dev.kpp_rows * sizeof(cur_rcmap[0]));
	memset(prev_rcmap, 0, kpp_dev.kpp_rows * sizeof(prev_rcmap[0]));

	key_pad_enabled = 1;
	/* Initialize the polling timer */
	init_timer(&kpp_dev.poll_timer);

	/*
	 * Request for IRQ number for keypad port. The Interrupt handler
	 * function (mxc_kpp_interrupt) is called when ever interrupt occurs on
	 * keypad port.
	 */
	retval = request_irq(irq, mxc_kpp_interrupt, 0, MOD_NAME, MOD_NAME);
	if (retval) {
		pr_debug("KPP: request_irq(%d) returned error %d\n",
			 MXC_INT_KPP, retval);
		goto err3;
	}

	/* By default, devices should wakeup if they can */
	/* So keypad is set as "should wakeup" as it can */
	device_init_wakeup(&pdev->dev, 1);

	return 0;

      err3:
	mxc_kpp_free_allocated();
      err2:
	input_free_device(mxckbd_dev);
      err1:
	free_irq(irq, MOD_NAME);
	clk_disable(kpp_clk);
	clk_put(kpp_clk);
	return retval;
}

/*!
 * Dissociates the driver from the kpp device.
 *
 * @param   pdev  the device structure used to give information on which SDHC
 *                to remove
 *
 * @return  The function always returns 0.
 */
static int mxc_kpp_remove(struct platform_device *pdev)
{
	unsigned short reg_val;

	/*
	 * Clear the KPKD status flag (write 1 to it) and synchronizer chain.
	 * Set KDIE control bit, clear KRIE control bit (avoid false release
	 * events. Disable the keypad GPIO pins.
	 */
	__raw_writew(0x00, kpp_dev.base + KPCR);
	__raw_writew(0x00, kpp_dev.base + KPDR);
	__raw_writew(0x00, kpp_dev.base + KDDR);

	reg_val = __raw_readw(kpp_dev.base + KPSR);
	reg_val |= KBD_STAT_KPKD;
	reg_val &= ~KBD_STAT_KRSS;
	reg_val |= KBD_STAT_KDIE;
	reg_val &= ~KBD_STAT_KRIE;
	__raw_writew(reg_val, kpp_dev.base + KPSR);

	gpio_keypad_inactive();
	clk_disable(kpp_clk);
	clk_put(kpp_clk);

	KPress = 0;

	del_timer(&kpp_dev.poll_timer);

	free_irq(keypad->irq, MOD_NAME);
	input_unregister_device(mxckbd_dev);

	mxc_kpp_free_allocated();

	return 0;
}

/*!
 * This structure contains pointers to the power management callback functions.
 */
static struct platform_driver mxc_kpd_driver = {
	.driver = {
		   .name = "mxc_keypad",
		   .bus = &platform_bus_type,
		   },
	.suspend = mxc_kpp_suspend,
	.resume = mxc_kpp_resume,
	.probe = mxc_kpp_probe,
	.remove = mxc_kpp_remove
};

/*!
 * This function is called for module initialization.
 * It registers keypad char driver and requests for KPP irq number. This
 * function does the initialization of the keypad device.
 *
 * The following steps are used for keypad configuration,\n
 * -# Enable number of rows in the keypad control register (KPCR[7:0}).\n
 * -# Write 0's to KPDR[15:8]\n
 * -# Configure keypad columns as open-drain (KPCR[15:8])\n
 * -# Configure columns as output, rows as input (KDDR[15:0])\n
 * -# Clear the KPKD status flag (write 1 to it) and synchronizer chain\n
 * -# Set KDIE control bit, clear KRIE control bit\n
 * In this function the keypad queue initialization is done.
 * The keypad IOMUX configuration are done here.*

 *
 * @return      0 on success and a non-zero value on failure.
 */
static int __init mxc_kpp_init(void)
{
	printk(KERN_INFO "MXC keypad loaded\n");
	platform_driver_register(&mxc_kpd_driver);
	return 0;
}

/*!
 * This function is called whenever the module is removed from the kernel. It
 * unregisters the keypad driver from kernel and frees the irq number.
 * This function puts the keypad to standby mode. The keypad interrupts are
 * disabled. It calls gpio_keypad_inactive function to switch gpio
 * configuration into default state.
 *
 */
static void __exit mxc_kpp_cleanup(void)
{
	platform_driver_unregister(&mxc_kpd_driver);
}

module_init(mxc_kpp_init);
module_exit(mxc_kpp_cleanup);

MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("MXC Keypad Controller Driver");
MODULE_LICENSE("GPL");