path: root/drivers/input/touchscreen/egalax_ts.c

/*
 * Driver for EETI eGalax Multiple Touch Controller
 *
 * Copyright (C) 2011 Freescale Semiconductor, Inc.
 *
 * based on max11801_ts.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.

 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.

 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

/* EETI eGalax serial touch screen controller is a I2C based multiple
 * touch screen controller, it can supports 5 pointer multiple
 * touch. */

/* TODO:
  - auto idle mode support
  - early suspend support for android
*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/bitops.h>

#define REPORT_MODE_SINGLE		0x1
#define REPORT_MODE_VENDOR		0x3
#define REPORT_MODE_MTTOUCH		0x4

#define MAX_SUPPORT_POINTS		5

#define EVENT_MODE		0
#define EVENT_STATUS		1
#define EVENT_VALID_OFFSET	7
#define EVENT_VAILD_MASK	(0x1 << EVENT_VALID_OFFSET)
#define EVENT_ID_OFFSET		2
#define EVENT_ID_MASK		(0xf << EVENT_ID_OFFSET)
#define EVENT_IN_RANGE		(0x1 << 1)
#define EVENT_DOWN_UP		(0X1 << 0)

#define MAX_I2C_DATA_LEN	10

struct egalax_pointer {
	bool valid;
	bool status;
	u16 x;
	u16 y;
};

struct egalax_ts {
	struct i2c_client		*client;
	struct input_dev		*input_dev;
	struct egalax_pointer		events[MAX_SUPPORT_POINTS];
};

static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
{
	struct egalax_ts *data = dev_id;
	struct input_dev *input_dev = data->input_dev;
	struct i2c_client *client = data->client;
	struct egalax_pointer *events = data->events;
	u8 buf[MAX_I2C_DATA_LEN];
	int i, id, ret, x, y;
	bool down, valid;
	u8 state;

retry:
	ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
	if (ret == -EAGAIN)
		goto retry;

	if (ret < 0)
		return IRQ_HANDLED;

	dev_dbg(&client->dev, "recv ret:%d", ret);
	for (i = 0; i < MAX_I2C_DATA_LEN; i++)
		dev_dbg(&client->dev, " %x ", buf[i]);

	if (buf[0] != REPORT_MODE_VENDOR
	    && buf[0] != REPORT_MODE_SINGLE
	    && buf[0] != REPORT_MODE_MTTOUCH) {
		/* invalid point */
		return IRQ_HANDLED;
	}

	if (buf[0] == REPORT_MODE_VENDOR) {
		dev_dbg(&client->dev, "vendor message, ignored\n");
		return IRQ_HANDLED;
	}

	state = buf[1];
	x = (buf[3] << 8) | buf[2];
	y = (buf[5] << 8) | buf[4];

	/* Currently, the panel Freescale using on SMD board _NOT_
	 * support single pointer mode. All event are going to
	 * multiple pointer mode.  Add single pointer mode according
	 * to EETI eGalax I2C programming manual.
	 */
	if (buf[0] == REPORT_MODE_SINGLE) {
		input_report_abs(input_dev, ABS_X, x);
		input_report_abs(input_dev, ABS_Y, y);
		input_report_key(input_dev, BTN_TOUCH, !!state);
		input_sync(input_dev);
		return IRQ_HANDLED;
	}

	/* deal with multiple touch  */
	valid = state & EVENT_VAILD_MASK;
	id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
	down = state & EVENT_DOWN_UP;

	if (!valid || id > MAX_SUPPORT_POINTS) {
		dev_dbg(&client->dev, "point invalid\n");
		return IRQ_HANDLED;
	}

	if (down) {
		/* should also report old pointers */
		events[id].valid = valid;
		events[id].status = down;
		events[id].x = x;
		events[id].y = y;

#ifdef FORCE_SINGLE_POINTER_SUPPORT
		input_report_abs(input_dev, ABS_X, x);
		input_report_abs(input_dev, ABS_Y, y);
		input_event(data->input_dev, EV_KEY, BTN_TOUCH, 1);
		input_report_abs(input_dev, ABS_PRESSURE, 1);
#else
		for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
			if (!events[i].valid)
				continue;
			dev_dbg(&client->dev, "report id:%d valid:%d x:%d y:%d",
				i, valid, x, y);

			input_report_abs(input_dev,
					 ABS_MT_TRACKING_ID, i);
			input_report_abs(input_dev,
					 ABS_MT_TOUCH_MAJOR, 1);
			input_report_abs(input_dev,
					 ABS_MT_POSITION_X, events[i].x);
			input_report_abs(input_dev,
					 ABS_MT_POSITION_Y, events[i].y);
			input_mt_sync(input_dev);
		}
#endif
	} else {
		dev_dbg(&client->dev, "release id:%d\n", id);
		events[id].valid = 0;
		events[id].status = 0;
#ifdef FORCE_SINGLE_POINTER_SUPPORT
		input_report_key(input_dev, BTN_TOUCH, 0);
		input_report_abs(input_dev, ABS_PRESSURE, 0);
#else
		input_report_abs(input_dev, ABS_MT_TRACKING_ID, id);
		input_event(input_dev, EV_ABS, ABS_MT_TOUCH_MAJOR, 0);
		input_mt_sync(input_dev);
#endif
	}

	input_sync(input_dev);
	return IRQ_HANDLED;
}

static int egalax_wake_up_device(struct i2c_client *client)
{
	int gpio = irq_to_gpio(client->irq);
	int ret;

	ret = gpio_request(gpio, "egalax_irq");
	if (ret < 0) {
		dev_err(&client->dev, "request gpio failed:%d\n", ret);
		return ret;
	}
	/* wake up controller via an falling edge on IRQ. */
	gpio_direction_output(gpio, 0);
	gpio_set_value(gpio, 1);
	/* controller should be waken up, return irq.  */
	gpio_direction_input(gpio);
	gpio_free(gpio);
	return 0;
}

static int egalax_7200_firmware_version(struct i2c_client *client)
{
	static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
	int ret;
	ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
	if (ret < 0)
		return ret;
	return 0;
}

static int __devinit egalax_ts_probe(struct i2c_client *client,
				       const struct i2c_device_id *id)
{
	struct egalax_ts *data;
	struct input_dev *input_dev;
	int ret;

	data = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
	if (!data) {
		dev_err(&client->dev, "Failed to allocate memory\n");
		return -ENOMEM;
	}

	input_dev = input_allocate_device();
	if (!input_dev) {
		dev_err(&client->dev, "Failed to allocate memory\n");
		ret = -ENOMEM;
		goto err_free_data;
	}

	data->client = client;
	data->input_dev = input_dev;
	egalax_wake_up_device(client);
	ret = egalax_7200_firmware_version(client);
	if (ret < 0) {
		dev_err(&client->dev,
			"egalax_ts: failed to read firmware version\n");
		ret = -EIO;
		goto err_free_dev;
	}

	input_dev->name = "eGalax Touch Screen";
	input_dev->phys = "I2C",
	input_dev->id.bustype = BUS_I2C;
	input_dev->id.vendor = 0x0EEF;
	input_dev->id.product = 0x0020;
	input_dev->id.version = 0x0001;
	input_dev->dev.parent = &client->dev;

	__set_bit(EV_ABS, input_dev->evbit);
	__set_bit(EV_KEY, input_dev->evbit);
	__set_bit(BTN_TOUCH, input_dev->keybit);
	__set_bit(ABS_X, input_dev->absbit);
	__set_bit(ABS_Y, input_dev->absbit);
	__set_bit(ABS_PRESSURE, input_dev->absbit);
	input_set_abs_params(input_dev, ABS_X, 0, 32767, 0, 0);
	input_set_abs_params(input_dev, ABS_Y, 0, 32767, 0, 0);

#ifndef FORCE_SINGLE_POINTER_SUPPORT
	input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 32767, 0, 0);
	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 32767, 0, 0);
	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
	input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
	input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
			     MAX_SUPPORT_POINTS, 0, 0);
#endif
	input_set_drvdata(input_dev, data);

	ret = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
				   "egalax_ts", data);
	if (ret < 0) {
		dev_err(&client->dev, "Failed to register interrupt\n");
		goto err_free_dev;
	}

	ret = input_register_device(data->input_dev);
	if (ret < 0)
		goto err_free_irq;
	i2c_set_clientdata(client, data);
	return 0;

err_free_irq:
	free_irq(client->irq, data);
err_free_dev:
	input_free_device(input_dev);
err_free_data:
	kfree(data);

	return ret;
}

static __devexit int egalax_ts_remove(struct i2c_client *client)
{
	struct egalax_ts *data = i2c_get_clientdata(client);

	free_irq(client->irq, data);
	input_unregister_device(data->input_dev);
	input_free_device(data->input_dev);
	kfree(data);

	return 0;
}

static const struct i2c_device_id egalax_ts_id[] = {
	{"egalax_ts", 0},
	{}
};
MODULE_DEVICE_TABLE(i2c, egalax_ts_id);

#ifdef CONFIG_PM_SLEEP
static int egalax_ts_suspend(struct device *dev)
{
	int ret;
	u8 suspend_cmd[MAX_I2C_DATA_LEN] = {0x3, 0x6, 0xa, 0x3, 0x36,
					    0x3f, 0x2, 0, 0, 0};
	struct i2c_client *client = to_i2c_client(dev);
	ret = i2c_master_send(client, suspend_cmd,
			       MAX_I2C_DATA_LEN);
	return ret > 0 ? 0 : ret;
}

static int egalax_ts_resume(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	return egalax_wake_up_device(client);
}
#endif

static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
static struct i2c_driver egalax_ts_driver = {
	.driver = {
		.name = "egalax_ts",
		.pm	= &egalax_ts_pm_ops,
	},
	.id_table	= egalax_ts_id,
	.probe		= egalax_ts_probe,
	.remove		= __devexit_p(egalax_ts_remove),
};

static int __init egalax_ts_init(void)
{
	return i2c_add_driver(&egalax_ts_driver);
}

static void __exit egalax_ts_exit(void)
{
	i2c_del_driver(&egalax_ts_driver);
}

module_init(egalax_ts_init);
module_exit(egalax_ts_exit);

MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
MODULE_LICENSE("GPL");