path: root/drivers/mtd/nand/gpmi-nfc/gpmi-nfc.h

/*
 * Freescale GPMI NFC NAND Flash Driver
 *
 * Copyright (C) 2010 Freescale Semiconductor, Inc.
 * Copyright (C) 2008 Embedded Alley Solutions, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#ifndef __DRIVERS_MTD_NAND_GPMI_NFC_H
#define __DRIVERS_MTD_NAND_GPMI_NFC_H

/* Linux header files. */

#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
#include <linux/gpmi-nfc.h>
#include <asm/sizes.h>

/* Platform header files. */

#include <mach/system.h>
#include <mach/dmaengine.h>
#include <mach/device.h>
#include <mach/clock.h>

/* Driver header files. */

#include "../nand_device_info.h"

/*
 *------------------------------------------------------------------------------
 * Fundamental Macros
 *------------------------------------------------------------------------------
 */

/* Define this macro to enable detailed information messages. */

#define DETAILED_INFO

/* Define this macro to enable event reporting. */

/*#define EVENT_REPORTING*/

/*
 *------------------------------------------------------------------------------
 * Fundamental Data Structures
 *------------------------------------------------------------------------------
 */

/**
 * struct resources - The collection of resources the driver needs.
 *
 * @gpmi_regs:         A pointer to the GPMI registers.
 * @bch_regs:          A pointer to the BCH registers.
 * @bch_interrupt:     The BCH interrupt number.
 * @dma_low_channel:   The low  DMA channel.
 * @dma_high_channel:  The high DMA channel.
 * @dma_interrupt:     The DMA interrupt number.
 * @clock:             A pointer to the struct clk for the NFC's clock.
 */

struct resources {
	void          *gpmi_regs;
	void          *bch_regs;
	unsigned int  bch_interrupt;
	unsigned int  dma_low_channel;
	unsigned int  dma_high_channel;
	unsigned int  dma_interrupt;
	struct clk    *clock;
};

/**
 * struct mil - State for the MTD Interface Layer.
 *
 * @nand:                    The NAND Flash MTD data structure that represents
 *                           the NAND Flash medium.
 * @mtd:                     The MTD data structure that represents the NAND
 *                           Flash medium.
 * @oob_layout:              A structure that describes how bytes are laid out
 *                           in the OOB.
 * @general_use_mtd:         A pointer to an MTD we export for general use.
 *                           This *may* simply be a pointer to the mtd field, if
 *                           we've been instructed NOT to protect the boot
 *                           areas.
 * @partitions:              A pointer to a set of partitions applied to the
 *                           general use MTD.
 * @partition_count:         The number of partitions.
 * @ubi_partition_memory:    If not NULL, a block of memory used to create a set
 *                           of partitions that help with the problem that UBI
 *                           can't handle an MTD larger than 2GiB.
 * @current_chip:            The chip currently selected by the NAND Fash MTD
 *                           code. A negative value indicates that no chip is
 *                           selected.
 * @command_length:          The length of the command that appears in the
 *                           command buffer (see cmd_virt, below).
 * @inject_ecc_error:        Indicates the driver should inject a "fake" ECC
 *                           error into the next read operation that uses ECC.
 *                           User space programs can set this value through the
 *                           sysfs node of the same name. If this value is less
 *                           than zero, the driver will inject an uncorrectable
 *                           ECC error. If this value is greater than zero, the
 *                           driver will inject that number of correctable
 *                           errors, capped by the maximum possible number of
 *                           errors that could appear in a single read.
 * @ignore_bad_block_marks:  Indicates we are ignoring bad block marks.
 * @saved_bbt:               A saved pointer to the in-memory NAND Flash MTD bad
 *                           block table. See show_device_ignorebad() for more
 *                           details.
 * @raw_oob_mode:            Indicates the OOB is to be read/written in "raw"
 *                           mode. See mil_ecc_read_oob() for details.
 * @hooked_read_oob:         A pointer to the ecc.read_oob() function we
 *                           "hooked." See mil_ecc_read_oob() for details.
 * @hooked_write_oob:        A pointer to the ecc.write_oob() function pointer
 *                           we "hooked." See mil_ecc_read_oob() for details.
 * @marking_a_bad_block:     Indicates the caller is marking a bad block. See
 *                           mil_ecc_write_oob() for details.
 * @hooked_block_markbad:    A pointer to the block_markbad() function we
 *                           we "hooked." See mil_ecc_write_oob() for details.
 * @cmd_virt:                A pointer to a DMA-coherent buffer in which we
 *                           accumulate command bytes before we give them to the
 *                           NFC layer. See mil_cmd_ctrl() for more details.
 * @cmd_phys:                The physical address for the cmd_virt buffer.
 * @page_buffer_virt:        A pointer to a DMA-coherent buffer we use for
 *                           reading and writing pages. This buffer includes
 *                           space for both the payload data and the auxiliary
 *                           data (including status bytes, but not syndrome
 *                           bytes).
 * @page_buffer_phys:        The physical address for the page_buffer_virt
 *                           buffer.
 * @page_buffer_size:        The size of the page buffer.
 * @payload_virt:            A pointer to a location in the page buffer used
 *                           for payload bytes. The size of this buffer is
 *                           determined by struct nfc_geometry.
 * @payload_phys:            The physical address for payload_virt.
 * @payload_size:            The size of the payload area in the page buffer.
 * @auxiliary_virt:          A pointer to a location in the page buffer used
 *                           for auxiliary bytes. The size of this buffer is
 *                           determined by struct nfc_geometry.
 * @auxiliary_phys:          The physical address for auxiliary_virt.
 * @auxiliary_size:          The size of the auxiliary area in the page buffer.
 */

#define MIL_COMMAND_BUFFER_SIZE (10)

struct mil {

	/* MTD Data Structures */

	struct nand_chip       nand;
	struct mtd_info        mtd;
	struct nand_ecclayout  oob_layout;

	/* Partitioning and Boot Area Protection */

	struct mtd_info        *general_use_mtd;
	struct mtd_partition   *partitions;
	unsigned int           partition_count;
	void                   *ubi_partition_memory;

	/* General-use Variables */

	int                    current_chip;
	unsigned int           command_length;
	int                    inject_ecc_error;
	int                    ignore_bad_block_marks;
	void                   *saved_bbt;

	/* MTD Function Pointer Hooks */

	int                    raw_oob_mode;
	int                    (*hooked_read_oob)(struct mtd_info *mtd,
					loff_t from, struct mtd_oob_ops *ops);
	int                    (*hooked_write_oob)(struct mtd_info *mtd,
					loff_t to, struct mtd_oob_ops *ops);

	int                    marking_a_bad_block;
	int                    (*hooked_block_markbad)(struct mtd_info *mtd,
					loff_t ofs);

	/* DMA Buffers */

	char                   *cmd_virt;
	dma_addr_t             cmd_phys;

	void                   *page_buffer_virt;
	dma_addr_t             page_buffer_phys;
	unsigned int           page_buffer_size;

	void                   *payload_virt;
	dma_addr_t             payload_phys;

	void                   *auxiliary_virt;
	dma_addr_t             auxiliary_phys;

};

/**
 * struct physical_geometry - Physical geometry description.
 *
 * This structure describes the physical geometry of the medium.
 *
 * @chip_count:                    The number of chips in the medium.
 * @chip_size_in_bytes:            The size, in bytes, of a single chip
 *                                 (excluding the out-of-band bytes).
 * @block_size_in_bytes:           The size, in bytes, of a single block
 *                                 (excluding the out-of-band bytes).
 * @page_data_size_in_bytes:       The size, in bytes, of the data area in a
 *                                 page (excluding the out-of-band bytes).
 * @page_oob_size_in_bytes:        The size, in bytes, of the out-of-band area
 *                                 in a page.
 */

struct physical_geometry {
	unsigned int  chip_count;
	uint64_t      chip_size_in_bytes;
	unsigned int  block_size_in_bytes;
	unsigned int  page_data_size_in_bytes;
	unsigned int  page_oob_size_in_bytes;
};

/**
 * struct nfc_geometry - NFC geometry description.
 *
 * This structure describes the NFC's view of the medium geometry.
 *
 * @ecc_algorithm:            The human-readable name of the ECC algorithm
 *                            (e.g., "Reed-Solomon" or "BCH").
 * @ecc_strength:             A number that describes the strength of the ECC
 *                            algorithm.
 * @page_size_in_bytes:       The size, in bytes, of a physical page, including
 *                            both data and OOB.
 * @metadata_size_in_bytes:   The size, in bytes, of the metadata.
 * @ecc_chunk_size_in_bytes:  The size, in bytes, of a single ECC chunk. Note
 *                            the first chunk in the page includes both data and
 *                            metadata, so it's a bit larger than this value.
 * @ecc_chunk_count:          The number of ECC chunks in the page,
 * @payload_size_in_bytes:    The size, in bytes, of the payload buffer.
 * @auxiliary_size_in_bytes:  The size, in bytes, of the auxiliary buffer.
 * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
 *                            the ECC status appears.
 * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
 *                            which the underlying physical block mark appears.
 * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
 *                            which the underlying physical block mark appears.
 */

struct nfc_geometry {
	char          *ecc_algorithm;
	unsigned int  ecc_strength;
	unsigned int  page_size_in_bytes;
	unsigned int  metadata_size_in_bytes;
	unsigned int  ecc_chunk_size_in_bytes;
	unsigned int  ecc_chunk_count;
	unsigned int  payload_size_in_bytes;
	unsigned int  auxiliary_size_in_bytes;
	unsigned int  auxiliary_status_offset;
	unsigned int  block_mark_byte_offset;
	unsigned int  block_mark_bit_offset;
};

/**
 * struct boot_rom_geometry - Boot ROM geometry description.
 *
 * This structure encapsulates decisions made by the Boot ROM Helper.
 *
 * @boot_area_count:             The number of boot areas. The first boot area
 *                               appears at the beginning of chip 0, the next
 *                               at the beginning of chip 1, etc.
 * @boot_area_size_in_bytes:     The size, in bytes, of each boot area.
 * @stride_size_in_pages:        The size of a boot block stride, in pages.
 * @search_area_stride_exponent: The logarithm to base 2 of the size of a
 *                               search area in boot block strides.
 */

struct boot_rom_geometry {
	unsigned int  boot_area_count;
	unsigned int  boot_area_size_in_bytes;
	unsigned int  stride_size_in_pages;
	unsigned int  search_area_stride_exponent;
};

/**
 * struct gpmi_nfc_data - i.MX NFC per-device data.
 *
 * Note that the "device" managed by this driver represents the NAND Flash
 * controller *and* the NAND Flash medium behind it. Thus, the per-device data
 * structure has information about the controller, the chips to which it is
 * connected, and properties of the medium as a whole.
 *
 * @dev:                 A pointer to the owning struct device.
 * @pdev:                A pointer to the owning struct platform_device.
 * @pdata:               A pointer to the device's platform data.
 * @resources:           Information about system resources used by this driver.
 * @device_info:         A structure that contains detailed information about
 *                       the NAND Flash device.
 * @physical_geometry:   A description of the medium's physical geometry.
 * @nfc:                 A pointer to a structure that represents the underlying
 *                       NFC hardware.
 * @nfc_geometry:        A description of the medium geometry as viewed by the
 *                       NFC.
 * @rom:                 A pointer to a structure that represents the underlying
 *                       Boot ROM.
 * @rom_geometry:        A description of the medium geometry as viewed by the
 *                       Boot ROM.
 * @mil:                 A collection of information used by the MTD Interface
 *                       Layer.
 */

struct gpmi_nfc_data {

	/* System Interface */
	struct device                  *dev;
	struct platform_device         *pdev;
	struct gpmi_nfc_platform_data  *pdata;

	/* Resources */
	struct resources               resources;

	/* Flash Hardware */
	struct nand_device_info        device_info;
	struct physical_geometry       physical_geometry;

	/* NFC HAL */
	struct nfc_hal                 *nfc;
	struct nfc_geometry            nfc_geometry;

	/* Boot ROM Helper */
	struct boot_rom_helper         *rom;
	struct boot_rom_geometry       rom_geometry;

	/* MTD Interface Layer */
	struct mil                     mil;

};

/**
 * struct gpmi_nfc_timing - GPMI NFC timing parameters.
 *
 * This structure contains the fundamental timing attributes for the NAND Flash
 * bus and the GPMI NFC hardware.
 *
 * @data_setup_in_ns:         The data setup time, in nanoseconds. Usually the
 *                            maximum of tDS and tWP. A negative value
 *                            indicates this characteristic isn't known.
 * @data_hold_in_ns:          The data hold time, in nanoseconds. Usually the
 *                            maximum of tDH, tWH and tREH. A negative value
 *                            indicates this characteristic isn't known.
 * @address_setup_in_ns:      The address setup time, in nanoseconds. Usually
 *                            the maximum of tCLS, tCS and tALS. A negative
 *                            value indicates this characteristic isn't known.
 * @gpmi_sample_delay_in_ns:  A GPMI-specific timing parameter. A negative value
 *                            indicates this characteristic isn't known.
 * @tREA_in_ns:               tREA, in nanoseconds, from the data sheet. A
 *                            negative value indicates this characteristic isn't
 *                            known.
 * @tRLOH_in_ns:              tRLOH, in nanoseconds, from the data sheet. A
 *                            negative value indicates this characteristic isn't
 *                            known.
 * @tRHOH_in_ns:              tRHOH, in nanoseconds, from the data sheet. A
 *                            negative value indicates this characteristic isn't
 *                            known.
 */

struct gpmi_nfc_timing {
	int8_t  data_setup_in_ns;
	int8_t  data_hold_in_ns;
	int8_t  address_setup_in_ns;
	int8_t  gpmi_sample_delay_in_ns;
	int8_t  tREA_in_ns;
	int8_t  tRLOH_in_ns;
	int8_t  tRHOH_in_ns;
};

/**
 * struct gpmi_nfc_hardware_timing - GPMI NFC hardware timing parameters.
 *
 * This structure contains timing information expressed in a form directly
 * usable by the GPMI NFC hardware.
 *
 * @data_setup_in_cycles:      The data setup time, in cycles.
 * @data_hold_in_cycles:       The data hold time, in cycles.
 * @address_setup_in_cycles:   The address setup time, in cycles.
 * @use_half_periods:          Indicates the clock is running slowly, so the
 *                             NFC DLL should use half-periods.
 * @sample_delay_factor:       The sample delay factor.
 */

struct gpmi_nfc_hardware_timing {
	uint8_t  data_setup_in_cycles;
	uint8_t  data_hold_in_cycles;
	uint8_t  address_setup_in_cycles;
	bool     use_half_periods;
	uint8_t  sample_delay_factor;
};

/**
 * struct nfc_hal - GPMI NFC HAL
 *
 * This structure embodies an abstract interface to the underlying NFC hardware.
 *
 * @version:                     The NFC hardware version.
 * @description:                 A pointer to a human-readable description of
 *                               the NFC hardware.
 * @max_chip_count:              The maximum number of chips the NFC can
 *                               possibly support (this value is a constant for
 *                               each NFC version). This may *not* be the actual
 *                               number of chips connected.
 * @max_data_setup_cycles:       The maximum number of data setup cycles that
 *                               can be expressed in the hardware.
 * @internal_data_setup_in_ns:   The time, in ns, that the NFC hardware requires
 *                               for data read internal setup. In the Reference
 *                               Manual, see the chapter "High-Speed NAND
 *                               Timing" for more details.
 * @max_sample_delay_factor:     The maximum sample delay factor that can be
 *                               expressed in the hardware.
 * @max_dll_clock_period_in_ns:  The maximum period of the GPMI clock that the
 *                               sample delay DLL hardware can possibly work
 *                               with (the DLL is unusable with longer periods).
 *                               If the full-cycle period is greater than HALF
 *                               this value, the DLL must be configured to use
 *                               half-periods.
 * @max_dll_delay_in_ns:         The maximum amount of delay, in ns, that the
 *                               DLL can implement.
 * @dma_descriptors:             A pool of DMA descriptors.
 * @isr_dma_channel:             The DMA channel with which the NFC HAL is
 *                               working. We record this here so the ISR knows
 *                               which DMA channel to acknowledge.
 * @dma_done:                    The completion structure used for DMA
 *                               interrupts.
 * @bch_done:                    The completion structure used for BCH
 *                               interrupts.
 * @timing:                      The current timing configuration.
 * @clock_frequency_in_hz:       The clock frequency, in Hz, during the current
 *                               I/O transaction. If no I/O transaction is in
 *                               progress, this is the clock frequency during
 *                               the most recent I/O transaction.
 * @hardware_timing:             The hardware timing configuration in effect
 *                               during the current I/O transaction. If no I/O
 *                               transaction is in progress, this is the
 *                               hardware timing configuration during the most
 *                               recent I/O transaction.
 * @init:                        Initializes the NFC hardware and data
 *                               structures. This function will be called after
 *                               everything has been set up for communication
 *                               with the NFC itself, but before the platform
 *                               has set up off-chip communication. Thus, this
 *                               function must not attempt to communicate with
 *                               the NAND Flash hardware.
 * @set_geometry:                Configures the NFC hardware and data structures
 *                               to match the physical NAND Flash geometry.
 * @set_geometry:                Configures the NFC hardware and data structures
 *                               to match the physical NAND Flash geometry.
 * @set_timing:                  Configures the NFC hardware and data structures
 *                               to match the given NAND Flash bus timing.
 * @get_timing:                  Returns the the clock frequency, in Hz, and
 *                               the hardware timing configuration during the
 *                               current I/O transaction. If no I/O transaction
 *                               is in progress, this is the timing state during
 *                               the most recent I/O transaction.
 * @exit:                        Shuts down the NFC hardware and data
 *                               structures. This function will be called after
 *                               the platform has shut down off-chip
 *                               communication but while communication with the
 *                               NFC itself still works.
 * @clear_bch:                   Clears a BCH interrupt (intended to be called
 *                               by a more general interrupt handler to do
 *                               device-specific clearing).
 * @is_ready:                    Returns true if the given chip is ready.
 * @begin:                       Begins an interaction with the NFC. This
 *                               function must be called before *any* of the
 *                               following functions so the NFC can prepare
 *                               itself.
 * @end:                         Ends interaction with the NFC. This function
 *                               should be called to give the NFC a chance to,
 *                               among other things, enter a lower-power state.
 * @send_command:                Sends the given buffer of command bytes.
 * @send_data:                   Sends the given buffer of data bytes.
 * @read_data:                   Reads data bytes into the given buffer.
 * @send_page:                   Sends the given given data and OOB bytes,
 *                               using the ECC engine.
 * @read_page:                   Reads a page through the ECC engine and
 *                               delivers the data and OOB bytes to the given
 *                               buffers.
 */

#define  NFC_DMA_DESCRIPTOR_COUNT  (4)

struct nfc_hal {

	/* Hardware attributes. */

	const unsigned int      version;
	const char              *description;
	const unsigned int      max_chip_count;
	const unsigned int      max_data_setup_cycles;
	const unsigned int      internal_data_setup_in_ns;
	const unsigned int      max_sample_delay_factor;
	const unsigned int      max_dll_clock_period_in_ns;
	const unsigned int      max_dll_delay_in_ns;

	/* Working variables. */

	struct mxs_dma_desc     *dma_descriptors[NFC_DMA_DESCRIPTOR_COUNT];
	int                     isr_dma_channel;
	struct completion       dma_done;
	struct completion       bch_done;
	struct gpmi_nfc_timing  timing;
	unsigned long           clock_frequency_in_hz;

	/* Configuration functions. */

	int   (*init)        (struct gpmi_nfc_data *);
	int   (*set_geometry)(struct gpmi_nfc_data *);
	int   (*set_timing)  (struct gpmi_nfc_data *,
					const struct gpmi_nfc_timing *);
	void  (*get_timing)  (struct gpmi_nfc_data *,
					unsigned long *clock_frequency_in_hz,
					struct gpmi_nfc_hardware_timing *);
	void  (*exit)        (struct gpmi_nfc_data *);

	/* Call these functions to begin and end I/O. */

	void  (*begin)       (struct gpmi_nfc_data *);
	void  (*end)         (struct gpmi_nfc_data *);

	/* Call these I/O functions only between begin() and end(). */

	void  (*clear_bch)   (struct gpmi_nfc_data *);
	int   (*is_ready)    (struct gpmi_nfc_data *, unsigned chip);
	int   (*send_command)(struct gpmi_nfc_data *, unsigned chip,
				dma_addr_t buffer, unsigned length);
	int   (*send_data)   (struct gpmi_nfc_data *, unsigned chip,
				dma_addr_t buffer, unsigned length);
	int   (*read_data)   (struct gpmi_nfc_data *, unsigned chip,
				dma_addr_t buffer, unsigned length);
	int   (*send_page)   (struct gpmi_nfc_data *, unsigned chip,
				dma_addr_t payload, dma_addr_t auxiliary);
	int   (*read_page)   (struct gpmi_nfc_data *, unsigned chip,
				dma_addr_t payload, dma_addr_t auxiliary);
};

/**
 * struct boot_rom_helper - Boot ROM Helper
 *
 * This structure embodies the interface to an object that assists the driver
 * in making decisions that relate to the Boot ROM.
 *
 * @version:                    The Boot ROM version.
 * @description:                A pointer to a human-readable description of the
 *                              Boot ROM.
 * @swap_block_mark:            Indicates that the Boot ROM will swap the block
 *                              mark with the first byte of the OOB.
 * @set_geometry:               Configures the Boot ROM geometry.
 * @check_transcription_stamp:  Checks for a transcription stamp. This pointer
 *                              is ignored if swap_block_mark is set.
 * @write_transcription_stamp:  Writes a transcription stamp. This pointer
 *                              is ignored if swap_block_mark is set.
 */

struct boot_rom_helper {
	const unsigned int  version;
	const char          *description;
	const int           swap_block_mark;
	int  (*set_geometry)             (struct gpmi_nfc_data *);
	int  (*check_transcription_stamp)(struct gpmi_nfc_data *);
	int  (*write_transcription_stamp)(struct gpmi_nfc_data *);
};

/*
 *------------------------------------------------------------------------------
 * External Symbols
 *------------------------------------------------------------------------------
 */

/* Event Reporting */

#if defined(EVENT_REPORTING)
	extern void gpmi_nfc_start_event_trace(char *description);
	extern void gpmi_nfc_add_event(char *description, int delta);
	extern void gpmi_nfc_stop_event_trace(char *description);
	extern void gpmi_nfc_dump_event_trace(void);
#else
	#define gpmi_nfc_start_event_trace(description)  do {} while (0)
	#define gpmi_nfc_add_event(description, delta)   do {} while (0)
	#define gpmi_nfc_stop_event_trace(description)   do {} while (0)
	#define gpmi_nfc_dump_event_trace()              do {} while (0)
#endif

/* NFC HAL Common Services */

extern irqreturn_t gpmi_nfc_bch_isr(int irq, void *cookie);
extern irqreturn_t gpmi_nfc_dma_isr(int irq, void *cookie);
extern int gpmi_nfc_dma_init(struct gpmi_nfc_data *this);
extern void gpmi_nfc_dma_exit(struct gpmi_nfc_data *this);
extern int gpmi_nfc_set_geometry(struct gpmi_nfc_data *this);
extern int gpmi_nfc_dma_go(struct gpmi_nfc_data *this, int  dma_channel);
extern int gpmi_nfc_compute_hardware_timing(struct gpmi_nfc_data *this,
					struct gpmi_nfc_hardware_timing *hw);

/* NFC HAL Structures */

extern struct nfc_hal  gpmi_nfc_hal_v0;
extern struct nfc_hal  gpmi_nfc_hal_v1;

/* Boot ROM Helper Common Services */

extern int gpmi_nfc_rom_helper_set_geometry(struct gpmi_nfc_data *this);

/* Boot ROM Helper Structures */

extern struct boot_rom_helper  gpmi_nfc_boot_rom_helper_v0;
extern struct boot_rom_helper  gpmi_nfc_boot_rom_helper_v1;

/* MTD Interface Layer */

extern int  gpmi_nfc_mil_init(struct gpmi_nfc_data *this);
extern void gpmi_nfc_mil_exit(struct gpmi_nfc_data *this);

#endif