1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/****************************************************************************
* Driver for Solarflare Solarstorm network controllers and boards
* Copyright 2006-2008 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
/*
* Driver for XFP optical PHYs (plus some support specific to the Quake 2032)
* See www.amcc.com for details (search for qt2032)
*/
#include <linux/timer.h>
#include <linux/delay.h>
#include "efx.h"
#include "gmii.h"
#include "mdio_10g.h"
#include "xenpack.h"
#include "phy.h"
#include "mac.h"
#define XFP_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PCS | \
MDIO_MMDREG_DEVS0_PMAPMD | \
MDIO_MMDREG_DEVS0_PHYXS)
/****************************************************************************/
/* Quake-specific MDIO registers */
#define MDIO_QUAKE_LED0_REG (0xD006)
void xfp_set_led(struct efx_nic *p, int led, int mode)
{
int addr = MDIO_QUAKE_LED0_REG + led;
mdio_clause45_write(p, p->mii.phy_id, MDIO_MMD_PMAPMD, addr,
mode);
}
#define XFP_MAX_RESET_TIME 500
#define XFP_RESET_WAIT 10
/* Reset the PHYXS MMD. This is documented (for the Quake PHY) as doing
* a complete soft reset.
*/
static int xfp_reset_phy(struct efx_nic *efx)
{
int rc;
rc = mdio_clause45_reset_mmd(efx, MDIO_MMD_PHYXS,
XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
XFP_RESET_WAIT);
if (rc < 0)
goto fail;
/* Wait 250ms for the PHY to complete bootup */
msleep(250);
/* Check that all the MMDs we expect are present and responding. We
* expect faults on some if the link is down, but not on the PHY XS */
rc = mdio_clause45_check_mmds(efx, XFP_REQUIRED_DEVS,
MDIO_MMDREG_DEVS0_PHYXS);
if (rc < 0)
goto fail;
efx->board_info.init_leds(efx);
return rc;
fail:
EFX_ERR(efx, "XFP: reset timed out!\n");
return rc;
}
static int xfp_phy_init(struct efx_nic *efx)
{
u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS);
int rc;
EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision"
" %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
MDIO_ID_REV(devid));
rc = xfp_reset_phy(efx);
EFX_INFO(efx, "XFP: PHY init %s.\n",
rc ? "failed" : "successful");
return rc;
}
static void xfp_phy_clear_interrupt(struct efx_nic *efx)
{
xenpack_clear_lasi_irqs(efx);
}
static int xfp_link_ok(struct efx_nic *efx)
{
return mdio_clause45_links_ok(efx, XFP_REQUIRED_DEVS);
}
static int xfp_phy_check_hw(struct efx_nic *efx)
{
int rc = 0;
int link_up = xfp_link_ok(efx);
/* Simulate a PHY event if link state has changed */
if (link_up != efx->link_up)
falcon_xmac_sim_phy_event(efx);
return rc;
}
static void xfp_phy_reconfigure(struct efx_nic *efx)
{
efx->link_up = xfp_link_ok(efx);
efx->link_options = GM_LPA_10000FULL;
}
static void xfp_phy_fini(struct efx_nic *efx)
{
/* Clobber the LED if it was blinking */
efx->board_info.blink(efx, 0);
}
struct efx_phy_operations falcon_xfp_phy_ops = {
.init = xfp_phy_init,
.reconfigure = xfp_phy_reconfigure,
.check_hw = xfp_phy_check_hw,
.fini = xfp_phy_fini,
.clear_interrupt = xfp_phy_clear_interrupt,
.reset_xaui = efx_port_dummy_op_void,
.mmds = XFP_REQUIRED_DEVS,
};
|
