1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
|
/*
* SDIO Host Controller Spec header file
* Register map and definitions for the Standard Host Controller
*
* Copyright (C) 1999-2011, Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a license
* other than the GPL, without Broadcom's express prior written consent.
*
* $Id: sdioh.h,v 13.17.2.3 2011-01-08 05:28:21 Exp $
*/
#ifndef _SDIOH_H
#define _SDIOH_H
#define SD_SysAddr 0x000
#define SD_BlockSize 0x004
#define SD_BlockCount 0x006
#define SD_Arg0 0x008
#define SD_Arg1 0x00A
#define SD_TransferMode 0x00C
#define SD_Command 0x00E
#define SD_Response0 0x010
#define SD_Response1 0x012
#define SD_Response2 0x014
#define SD_Response3 0x016
#define SD_Response4 0x018
#define SD_Response5 0x01A
#define SD_Response6 0x01C
#define SD_Response7 0x01E
#define SD_BufferDataPort0 0x020
#define SD_BufferDataPort1 0x022
#define SD_PresentState 0x024
#define SD_HostCntrl 0x028
#define SD_PwrCntrl 0x029
#define SD_BlockGapCntrl 0x02A
#define SD_WakeupCntrl 0x02B
#define SD_ClockCntrl 0x02C
#define SD_TimeoutCntrl 0x02E
#define SD_SoftwareReset 0x02F
#define SD_IntrStatus 0x030
#define SD_ErrorIntrStatus 0x032
#define SD_IntrStatusEnable 0x034
#define SD_ErrorIntrStatusEnable 0x036
#define SD_IntrSignalEnable 0x038
#define SD_ErrorIntrSignalEnable 0x03A
#define SD_CMD12ErrorStatus 0x03C
#define SD_Capabilities 0x040
#define SD_Capabilities3 0x044
#define SD_MaxCurCap 0x048
#define SD_MaxCurCap_Reserved 0x04C
#define SD_ADMA_ErrStatus 0x054
#define SD_ADMA_SysAddr 0x58
#define SD_SlotInterruptStatus 0x0FC
#define SD_HostControllerVersion 0x0FE
/* SD specific registers in PCI config space */
#define SD_SlotInfo 0x40
/* HC 3.0 specific registers and offsets */
#define SD3_HostCntrl2 0x03E
/* preset regsstart and count */
#define SD3_PresetValStart 0x060
#define SD3_PresetValCount 8
/* preset-indiv regs */
#define SD3_PresetVal_init 0x060
#define SD3_PresetVal_default 0x062
#define SD3_PresetVal_HS 0x064
#define SD3_PresetVal_SDR12 0x066
#define SD3_PresetVal_SDR25 0x068
#define SD3_PresetVal_SDR50 0x06a
#define SD3_PresetVal_SDR104 0x06c
#define SD3_PresetVal_DDR50 0x06e
/* preset value indices */
#define SD3_PRESETVAL_INITIAL_IX 0
#define SD3_PRESETVAL_DESPEED_IX 1
#define SD3_PRESETVAL_HISPEED_IX 2
#define SD3_PRESETVAL_SDR12_IX 3
#define SD3_PRESETVAL_SDR25_IX 4
#define SD3_PRESETVAL_SDR50_IX 5
#define SD3_PRESETVAL_SDR104_IX 6
#define SD3_PRESETVAL_DDR50_IX 7
/* SD_Capabilities reg (0x040) */
#define CAP_TO_CLKFREQ_M BITFIELD_MASK(6)
#define CAP_TO_CLKFREQ_S 0
#define CAP_TO_CLKUNIT_M BITFIELD_MASK(1)
#define CAP_TO_CLKUNIT_S 7
/* Note: for sdio-2.0 case, this mask has to be 6 bits, but msb 2
bits are reserved. going ahead with 8 bits, as it is req for 3.0
*/
#define CAP_BASECLK_M BITFIELD_MASK(8)
#define CAP_BASECLK_S 8
#define CAP_MAXBLOCK_M BITFIELD_MASK(2)
#define CAP_MAXBLOCK_S 16
#define CAP_ADMA2_M BITFIELD_MASK(1)
#define CAP_ADMA2_S 19
#define CAP_ADMA1_M BITFIELD_MASK(1)
#define CAP_ADMA1_S 20
#define CAP_HIGHSPEED_M BITFIELD_MASK(1)
#define CAP_HIGHSPEED_S 21
#define CAP_DMA_M BITFIELD_MASK(1)
#define CAP_DMA_S 22
#define CAP_SUSPEND_M BITFIELD_MASK(1)
#define CAP_SUSPEND_S 23
#define CAP_VOLT_3_3_M BITFIELD_MASK(1)
#define CAP_VOLT_3_3_S 24
#define CAP_VOLT_3_0_M BITFIELD_MASK(1)
#define CAP_VOLT_3_0_S 25
#define CAP_VOLT_1_8_M BITFIELD_MASK(1)
#define CAP_VOLT_1_8_S 26
#define CAP_64BIT_HOST_M BITFIELD_MASK(1)
#define CAP_64BIT_HOST_S 28
#define SDIO_OCR_READ_FAIL (2)
#define CAP_ASYNCINT_SUP_M BITFIELD_MASK(1)
#define CAP_ASYNCINT_SUP_S 29
#define CAP_SLOTTYPE_M BITFIELD_MASK(2)
#define CAP_SLOTTYPE_S 30
#define CAP3_MSBits_OFFSET (32)
/* note: following are caps MSB32 bits.
So the bits start from 0, instead of 32. that is why
CAP3_MSBits_OFFSET is subtracted.
*/
#define CAP3_SDR50_SUP_M BITFIELD_MASK(1)
#define CAP3_SDR50_SUP_S (32 - CAP3_MSBits_OFFSET)
#define CAP3_SDR104_SUP_M BITFIELD_MASK(1)
#define CAP3_SDR104_SUP_S (33 - CAP3_MSBits_OFFSET)
#define CAP3_DDR50_SUP_M BITFIELD_MASK(1)
#define CAP3_DDR50_SUP_S (34 - CAP3_MSBits_OFFSET)
/* for knowing the clk caps in a single read */
#define CAP3_30CLKCAP_M BITFIELD_MASK(3)
#define CAP3_30CLKCAP_S (32 - CAP3_MSBits_OFFSET)
#define CAP3_DRIVTYPE_A_M BITFIELD_MASK(1)
#define CAP3_DRIVTYPE_A_S (36 - CAP3_MSBits_OFFSET)
#define CAP3_DRIVTYPE_C_M BITFIELD_MASK(1)
#define CAP3_DRIVTYPE_C_S (37 - CAP3_MSBits_OFFSET)
#define CAP3_DRIVTYPE_D_M BITFIELD_MASK(1)
#define CAP3_DRIVTYPE_D_S (38 - CAP3_MSBits_OFFSET)
#define CAP3_RETUNING_TC_M BITFIELD_MASK(4)
#define CAP3_RETUNING_TC_S (40 - CAP3_MSBits_OFFSET)
#define CAP3_TUNING_SDR50_M BITFIELD_MASK(1)
#define CAP3_TUNING_SDR50_S (45 - CAP3_MSBits_OFFSET)
#define CAP3_RETUNING_MODES_M BITFIELD_MASK(2)
#define CAP3_RETUNING_MODES_S (46 - CAP3_MSBits_OFFSET)
#define CAP3_CLK_MULT_M BITFIELD_MASK(8)
#define CAP3_CLK_MULT_S (48 - CAP3_MSBits_OFFSET)
#define PRESET_DRIVR_SELECT_M BITFIELD_MASK(2)
#define PRESET_DRIVR_SELECT_S 14
#define PRESET_CLK_DIV_M BITFIELD_MASK(10)
#define PRESET_CLK_DIV_S 0
/* SD_MaxCurCap reg (0x048) */
#define CAP_CURR_3_3_M BITFIELD_MASK(8)
#define CAP_CURR_3_3_S 0
#define CAP_CURR_3_0_M BITFIELD_MASK(8)
#define CAP_CURR_3_0_S 8
#define CAP_CURR_1_8_M BITFIELD_MASK(8)
#define CAP_CURR_1_8_S 16
/* SD_SysAddr: Offset 0x0000, Size 4 bytes */
/* SD_BlockSize: Offset 0x004, Size 2 bytes */
#define BLKSZ_BLKSZ_M BITFIELD_MASK(12)
#define BLKSZ_BLKSZ_S 0
#define BLKSZ_BNDRY_M BITFIELD_MASK(3)
#define BLKSZ_BNDRY_S 12
/* SD_BlockCount: Offset 0x006, size 2 bytes */
/* SD_Arg0: Offset 0x008, size = 4 bytes */
/* SD_TransferMode Offset 0x00C, size = 2 bytes */
#define XFER_DMA_ENABLE_M BITFIELD_MASK(1)
#define XFER_DMA_ENABLE_S 0
#define XFER_BLK_COUNT_EN_M BITFIELD_MASK(1)
#define XFER_BLK_COUNT_EN_S 1
#define XFER_CMD_12_EN_M BITFIELD_MASK(1)
#define XFER_CMD_12_EN_S 2
#define XFER_DATA_DIRECTION_M BITFIELD_MASK(1)
#define XFER_DATA_DIRECTION_S 4
#define XFER_MULTI_BLOCK_M BITFIELD_MASK(1)
#define XFER_MULTI_BLOCK_S 5
/* SD_Command: Offset 0x00E, size = 2 bytes */
/* resp_type field */
#define RESP_TYPE_NONE 0
#define RESP_TYPE_136 1
#define RESP_TYPE_48 2
#define RESP_TYPE_48_BUSY 3
/* type field */
#define CMD_TYPE_NORMAL 0
#define CMD_TYPE_SUSPEND 1
#define CMD_TYPE_RESUME 2
#define CMD_TYPE_ABORT 3
#define CMD_RESP_TYPE_M BITFIELD_MASK(2) /* Bits [0-1] - Response type */
#define CMD_RESP_TYPE_S 0
#define CMD_CRC_EN_M BITFIELD_MASK(1) /* Bit 3 - CRC enable */
#define CMD_CRC_EN_S 3
#define CMD_INDEX_EN_M BITFIELD_MASK(1) /* Bit 4 - Enable index checking */
#define CMD_INDEX_EN_S 4
#define CMD_DATA_EN_M BITFIELD_MASK(1) /* Bit 5 - Using DAT line */
#define CMD_DATA_EN_S 5
#define CMD_TYPE_M BITFIELD_MASK(2) /* Bit [6-7] - Normal, abort, resume, etc
*/
#define CMD_TYPE_S 6
#define CMD_INDEX_M BITFIELD_MASK(6) /* Bits [8-13] - Command number */
#define CMD_INDEX_S 8
/* SD_BufferDataPort0 : Offset 0x020, size = 2 or 4 bytes */
/* SD_BufferDataPort1 : Offset 0x022, size = 2 bytes */
/* SD_PresentState : Offset 0x024, size = 4 bytes */
#define PRES_CMD_INHIBIT_M BITFIELD_MASK(1) /* Bit 0 May use CMD */
#define PRES_CMD_INHIBIT_S 0
#define PRES_DAT_INHIBIT_M BITFIELD_MASK(1) /* Bit 1 May use DAT */
#define PRES_DAT_INHIBIT_S 1
#define PRES_DAT_BUSY_M BITFIELD_MASK(1) /* Bit 2 DAT is busy */
#define PRES_DAT_BUSY_S 2
#define PRES_PRESENT_RSVD_M BITFIELD_MASK(5) /* Bit [3-7] rsvd */
#define PRES_PRESENT_RSVD_S 3
#define PRES_WRITE_ACTIVE_M BITFIELD_MASK(1) /* Bit 8 Write is active */
#define PRES_WRITE_ACTIVE_S 8
#define PRES_READ_ACTIVE_M BITFIELD_MASK(1) /* Bit 9 Read is active */
#define PRES_READ_ACTIVE_S 9
#define PRES_WRITE_DATA_RDY_M BITFIELD_MASK(1) /* Bit 10 Write buf is avail */
#define PRES_WRITE_DATA_RDY_S 10
#define PRES_READ_DATA_RDY_M BITFIELD_MASK(1) /* Bit 11 Read buf data avail */
#define PRES_READ_DATA_RDY_S 11
#define PRES_CARD_PRESENT_M BITFIELD_MASK(1) /* Bit 16 Card present - debounced */
#define PRES_CARD_PRESENT_S 16
#define PRES_CARD_STABLE_M BITFIELD_MASK(1) /* Bit 17 Debugging */
#define PRES_CARD_STABLE_S 17
#define PRES_CARD_PRESENT_RAW_M BITFIELD_MASK(1) /* Bit 18 Not debounced */
#define PRES_CARD_PRESENT_RAW_S 18
#define PRES_WRITE_ENABLED_M BITFIELD_MASK(1) /* Bit 19 Write protected? */
#define PRES_WRITE_ENABLED_S 19
#define PRES_DAT_SIGNAL_M BITFIELD_MASK(4) /* Bit [20-23] Debugging */
#define PRES_DAT_SIGNAL_S 20
#define PRES_CMD_SIGNAL_M BITFIELD_MASK(1) /* Bit 24 Debugging */
#define PRES_CMD_SIGNAL_S 24
/* SD_HostCntrl: Offset 0x028, size = 1 bytes */
#define HOST_LED_M BITFIELD_MASK(1) /* Bit 0 LED On/Off */
#define HOST_LED_S 0
#define HOST_DATA_WIDTH_M BITFIELD_MASK(1) /* Bit 1 4 bit enable */
#define HOST_DATA_WIDTH_S 1
#define HOST_HI_SPEED_EN_M BITFIELD_MASK(1) /* Bit 2 High speed vs low speed */
#define HOST_DMA_SEL_S 3
#define HOST_DMA_SEL_M BITFIELD_MASK(2) /* Bit 4:3 DMA Select */
#define HOST_HI_SPEED_EN_S 2
/* Host Control2: */
#define HOSTCtrl2_PRESVAL_EN_M BITFIELD_MASK(1) /* 1 bit */
#define HOSTCtrl2_PRESVAL_EN_S 15 /* bit# */
#define HOSTCtrl2_ASYINT_EN_M BITFIELD_MASK(1) /* 1 bit */
#define HOSTCtrl2_ASYINT_EN_S 14 /* bit# */
#define HOSTCtrl2_SAMPCLK_SEL_M BITFIELD_MASK(1) /* 1 bit */
#define HOSTCtrl2_SAMPCLK_SEL_S 7 /* bit# */
#define HOSTCtrl2_EXEC_TUNING_M BITFIELD_MASK(1) /* 1 bit */
#define HOSTCtrl2_EXEC_TUNING_S 6 /* bit# */
#define HOSTCtrl2_DRIVSTRENGTH_SEL_M BITFIELD_MASK(2) /* 2 bit */
#define HOSTCtrl2_DRIVSTRENGTH_SEL_S 4 /* bit# */
#define HOSTCtrl2_1_8SIG_EN_M BITFIELD_MASK(1) /* 1 bit */
#define HOSTCtrl2_1_8SIG_EN_S 3 /* bit# */
#define HOSTCtrl2_UHSMODE_SEL_M BITFIELD_MASK(3) /* 3 bit */
#define HOSTCtrl2_UHSMODE_SEL_S 0 /* bit# */
#define HOST_CONTR_VER_2 (1)
#define HOST_CONTR_VER_3 (2)
/* misc defines */
#define SD1_MODE 0x1 /* SD Host Cntrlr Spec */
#define SD4_MODE 0x2 /* SD Host Cntrlr Spec */
/* SD_PwrCntrl: Offset 0x029, size = 1 bytes */
#define PWR_BUS_EN_M BITFIELD_MASK(1) /* Bit 0 Power the bus */
#define PWR_BUS_EN_S 0
#define PWR_VOLTS_M BITFIELD_MASK(3) /* Bit [1-3] Voltage Select */
#define PWR_VOLTS_S 1
/* SD_SoftwareReset: Offset 0x02F, size = 1 byte */
#define SW_RESET_ALL_M BITFIELD_MASK(1) /* Bit 0 Reset All */
#define SW_RESET_ALL_S 0
#define SW_RESET_CMD_M BITFIELD_MASK(1) /* Bit 1 CMD Line Reset */
#define SW_RESET_CMD_S 1
#define SW_RESET_DAT_M BITFIELD_MASK(1) /* Bit 2 DAT Line Reset */
#define SW_RESET_DAT_S 2
/* SD_IntrStatus: Offset 0x030, size = 2 bytes */
/* Defs also serve SD_IntrStatusEnable and SD_IntrSignalEnable */
#define INTSTAT_CMD_COMPLETE_M BITFIELD_MASK(1) /* Bit 0 */
#define INTSTAT_CMD_COMPLETE_S 0
#define INTSTAT_XFER_COMPLETE_M BITFIELD_MASK(1)
#define INTSTAT_XFER_COMPLETE_S 1
#define INTSTAT_BLOCK_GAP_EVENT_M BITFIELD_MASK(1)
#define INTSTAT_BLOCK_GAP_EVENT_S 2
#define INTSTAT_DMA_INT_M BITFIELD_MASK(1)
#define INTSTAT_DMA_INT_S 3
#define INTSTAT_BUF_WRITE_READY_M BITFIELD_MASK(1)
#define INTSTAT_BUF_WRITE_READY_S 4
#define INTSTAT_BUF_READ_READY_M BITFIELD_MASK(1)
#define INTSTAT_BUF_READ_READY_S 5
#define INTSTAT_CARD_INSERTION_M BITFIELD_MASK(1)
#define INTSTAT_CARD_INSERTION_S 6
#define INTSTAT_CARD_REMOVAL_M BITFIELD_MASK(1)
#define INTSTAT_CARD_REMOVAL_S 7
#define INTSTAT_CARD_INT_M BITFIELD_MASK(1)
#define INTSTAT_CARD_INT_S 8
#define INTSTAT_RETUNING_INT_M BITFIELD_MASK(1) /* Bit 12 */
#define INTSTAT_RETUNING_INT_S 12
#define INTSTAT_ERROR_INT_M BITFIELD_MASK(1) /* Bit 15 */
#define INTSTAT_ERROR_INT_S 15
/* SD_ErrorIntrStatus: Offset 0x032, size = 2 bytes */
/* Defs also serve SD_ErrorIntrStatusEnable and SD_ErrorIntrSignalEnable */
#define ERRINT_CMD_TIMEOUT_M BITFIELD_MASK(1)
#define ERRINT_CMD_TIMEOUT_S 0
#define ERRINT_CMD_CRC_M BITFIELD_MASK(1)
#define ERRINT_CMD_CRC_S 1
#define ERRINT_CMD_ENDBIT_M BITFIELD_MASK(1)
#define ERRINT_CMD_ENDBIT_S 2
#define ERRINT_CMD_INDEX_M BITFIELD_MASK(1)
#define ERRINT_CMD_INDEX_S 3
#define ERRINT_DATA_TIMEOUT_M BITFIELD_MASK(1)
#define ERRINT_DATA_TIMEOUT_S 4
#define ERRINT_DATA_CRC_M BITFIELD_MASK(1)
#define ERRINT_DATA_CRC_S 5
#define ERRINT_DATA_ENDBIT_M BITFIELD_MASK(1)
#define ERRINT_DATA_ENDBIT_S 6
#define ERRINT_CURRENT_LIMIT_M BITFIELD_MASK(1)
#define ERRINT_CURRENT_LIMIT_S 7
#define ERRINT_AUTO_CMD12_M BITFIELD_MASK(1)
#define ERRINT_AUTO_CMD12_S 8
#define ERRINT_VENDOR_M BITFIELD_MASK(4)
#define ERRINT_VENDOR_S 12
#define ERRINT_ADMA_M BITFIELD_MASK(1)
#define ERRINT_ADMA_S 9
/* Also provide definitions in "normal" form to allow combined masks */
#define ERRINT_CMD_TIMEOUT_BIT 0x0001
#define ERRINT_CMD_CRC_BIT 0x0002
#define ERRINT_CMD_ENDBIT_BIT 0x0004
#define ERRINT_CMD_INDEX_BIT 0x0008
#define ERRINT_DATA_TIMEOUT_BIT 0x0010
#define ERRINT_DATA_CRC_BIT 0x0020
#define ERRINT_DATA_ENDBIT_BIT 0x0040
#define ERRINT_CURRENT_LIMIT_BIT 0x0080
#define ERRINT_AUTO_CMD12_BIT 0x0100
#define ERRINT_ADMA_BIT 0x0200
/* Masks to select CMD vs. DATA errors */
#define ERRINT_CMD_ERRS (ERRINT_CMD_TIMEOUT_BIT | ERRINT_CMD_CRC_BIT |\
ERRINT_CMD_ENDBIT_BIT | ERRINT_CMD_INDEX_BIT)
#define ERRINT_DATA_ERRS (ERRINT_DATA_TIMEOUT_BIT | ERRINT_DATA_CRC_BIT |\
ERRINT_DATA_ENDBIT_BIT | ERRINT_ADMA_BIT)
#define ERRINT_TRANSFER_ERRS (ERRINT_CMD_ERRS | ERRINT_DATA_ERRS)
/* SD_WakeupCntr_BlockGapCntrl : Offset 0x02A , size = bytes */
/* SD_ClockCntrl : Offset 0x02C , size = bytes */
/* SD_SoftwareReset_TimeoutCntrl : Offset 0x02E , size = bytes */
/* SD_IntrStatus : Offset 0x030 , size = bytes */
/* SD_ErrorIntrStatus : Offset 0x032 , size = bytes */
/* SD_IntrStatusEnable : Offset 0x034 , size = bytes */
/* SD_ErrorIntrStatusEnable : Offset 0x036 , size = bytes */
/* SD_IntrSignalEnable : Offset 0x038 , size = bytes */
/* SD_ErrorIntrSignalEnable : Offset 0x03A , size = bytes */
/* SD_CMD12ErrorStatus : Offset 0x03C , size = bytes */
/* SD_Capabilities : Offset 0x040 , size = bytes */
/* SD_MaxCurCap : Offset 0x048 , size = bytes */
/* SD_MaxCurCap_Reserved: Offset 0x04C , size = bytes */
/* SD_SlotInterruptStatus: Offset 0x0FC , size = bytes */
/* SD_HostControllerVersion : Offset 0x0FE , size = bytes */
#endif /* _SDIOH_H */
|
