1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
#define SCI_MAJOR 204
#define SCI_MINOR_START 8
/*
* SCI register subset common for all port types.
* Not all registers will exist on all parts.
*/
enum {
SCSMR, /* Serial Mode Register */
SCBRR, /* Bit Rate Register */
SCSCR, /* Serial Control Register */
SCxSR, /* Serial Status Register */
SCFCR, /* FIFO Control Register */
SCFDR, /* FIFO Data Count Register */
SCxTDR, /* Transmit (FIFO) Data Register */
SCxRDR, /* Receive (FIFO) Data Register */
SCLSR, /* Line Status Register */
SCTFDR, /* Transmit FIFO Data Count Register */
SCRFDR, /* Receive FIFO Data Count Register */
SCSPTR, /* Serial Port Register */
HSSRR, /* Sampling Rate Register */
SCPCR, /* Serial Port Control Register */
SCPDR, /* Serial Port Data Register */
SCIx_NR_REGS,
};
/* SCSMR (Serial Mode Register) */
#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */
#define SCSMR_PE (1 << 5) /* Parity Enable */
#define SCSMR_ODD (1 << 4) /* Odd Parity */
#define SCSMR_STOP (1 << 3) /* Stop Bit Length */
#define SCSMR_CKS 0x0003 /* Clock Select */
/* Serial Control Register, SCIFA/SCIFB only bits */
#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */
#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */
/* SCxSR (Serial Status Register) on SCI */
#define SCI_TDRE 0x80 /* Transmit Data Register Empty */
#define SCI_RDRF 0x40 /* Receive Data Register Full */
#define SCI_ORER 0x20 /* Overrun Error */
#define SCI_FER 0x10 /* Framing Error */
#define SCI_PER 0x08 /* Parity Error */
#define SCI_TEND 0x04 /* Transmit End */
#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
/* SCxSR (Serial Status Register) on SCIF, HSCIF */
#define SCIF_ER 0x0080 /* Receive Error */
#define SCIF_TEND 0x0040 /* Transmission End */
#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */
#define SCIF_BRK 0x0010 /* Break Detect */
#define SCIF_FER 0x0008 /* Framing Error */
#define SCIF_PER 0x0004 /* Parity Error */
#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */
#define SCIF_DR 0x0001 /* Receive Data Ready */
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
/* SCFCR (FIFO Control Register) */
#define SCFCR_MCE 0x0008 /* Modem Control Enable */
#define SCFCR_TFRST 0x0004 /* Transmit FIFO Data Register Reset */
#define SCFCR_RFRST 0x0002 /* Receive FIFO Data Register Reset */
#define SCFCR_LOOP (1 << 0) /* Loopback Test */
/* SCSPTR (Serial Port Register), optional */
#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */
#define SCSPTR_RTSDT (1 << 6) /* Serial Port RTS Pin Data */
#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */
#define SCSPTR_CTSDT (1 << 4) /* Serial Port CTS Pin Data */
#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */
#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */
/* HSSRR HSCIF */
#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */
/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
#define SCPCR_RTSC (1 << 4) /* Serial Port RTS Pin / Output Pin */
#define SCPCR_CTSC (1 << 3) /* Serial Port CTS Pin / Input Pin */
/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
#define SCPDR_RTSD (1 << 4) /* Serial Port RTS Output Pin Data */
#define SCPDR_CTSD (1 << 3) /* Serial Port CTS Input Pin Data */
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask)
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_ARCH_SH73A0) || \
defined(CONFIG_ARCH_R8A7740)
# define SCxSR_RDxF_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffdf)
# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
#else
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
#endif
|
