path: root/drivers/usb/gadget/arcotg_udc.h

/*
 * Copyright (C) 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

/*!
 * @file arcotg_udc.h
 * @brief Freescale USB device/endpoint management registers
 * @ingroup USB
 */

#ifndef __ARCOTG_UDC_H
#define __ARCOTG_UDC_H

#define TRUE 1
#define FALSE 0

#define MSC_BULK_CB_WRAP_LEN 31
#define USE_MSC_WR(len) false

/* Iram patch */
#ifdef CONFIG_USB_STATIC_IRAM_PPH
/* size of 1 qTD's buffer,one is for BULK IN and other is BULK OUT */
#define USB_IRAM_SIZE		SZ_8K
#define IRAM_TD_PPH_SIZE	(USB_IRAM_SIZE / 2)
#define IRAM_PPH_NTD	2	/* number of TDs in IRAM  */
#else
#define USB_IRAM_SIZE		0
#define IRAM_TD_PPH_SIZE	0
#define IRAM_PPH_NTD	0
#endif

#define NEED_IRAM(ep) ((g_iram_size) && \
	((ep)->desc->bmAttributes == USB_ENDPOINT_XFER_BULK))

#ifdef CONFIG_ARCH_MX5
#define POSTPONE_FREE_LAST_DTD
#else
#undef POSTPONE_FREE_LAST_DTD
#endif

/* ### define USB registers here
 */
#define USB_MAX_ENDPOINTS		8
#define USB_MAX_PIPES			(USB_MAX_ENDPOINTS*2)
#define USB_MAX_CTRL_PAYLOAD		64
#define	USB_DR_SYS_OFFSET		0x400

#define	USB_DR_OFFSET	0x3100

struct usb_dr_device {
	/* Capability register */
	u32 id;
	u32 res1[35];
	u32 sbuscfg;		/* sbuscfg ahb burst */
	u32 res11[27];
	u16 caplength;		/* Capability Register Length */
	u16 hciversion;		/* Host Controller Interface Version */
	u32 hcsparams;		/* Host Controller Structual Parameters */
	u32 hccparams;		/* Host Controller Capability Parameters */
	u32 res2[5];
	u32 dciversion;		/* Device Controller Interface Version */
	u32 dccparams;		/* Device Controller Capability Parameters */
	u32 res3[6];
	/* Operation register */
	u32 usbcmd;		/* USB Command Register */
	u32 usbsts;		/* USB Status Register */
	u32 usbintr;		/* USB Interrupt Enable Register */
	u32 frindex;		/* Frame Index Register */
	u32 res4;
	u32 deviceaddr;		/* Device Address */
	u32 endpointlistaddr;	/* Endpoint List Address Register */
	u32 res5;
	u32 burstsize;		/* Master Interface Data Burst Size Register */
	u32 txttfilltuning;	/* Transmit FIFO Tuning Controls Register */
	u32 res6[6];
	u32 configflag;		/* Configure Flag Register */
	u32 portsc1;		/* Port 1 Status and Control Register */
	u32 res7[7];
	u32 otgsc;		/* On-The-Go Status and Control */
	u32 usbmode;		/* USB Mode Register */
	u32 endptsetupstat;	/* Endpoint Setup Status Register */
	u32 endpointprime;	/* Endpoint Initialization Register */
	u32 endptflush;		/* Endpoint Flush Register */
	u32 endptstatus;	/* Endpoint Status Register */
	u32 endptcomplete;	/* Endpoint Complete Register */
	u32 endptctrl[8 * 2];	/* Endpoint Control Registers */
	u32 res8[256];
#ifdef CONFIG_ARCH_MX5
	u32 res9[128];		/* i.MX51 start from 0x800 */
#endif
	u32 usbctrl;
	u32 otgmirror;
	u32 phyctrl0;
	u32 phyctrl1;
	u32 ctrl1;
	u32 uh2ctrl;
};

 /* non-EHCI USB system interface registers (Big Endian) */
struct usb_sys_interface {
	u32 snoop1;
	u32 snoop2;
	u32 age_cnt_thresh;	/* Age Count Threshold Register */
	u32 pri_ctrl;		/* Priority Control Register */
	u32 si_ctrl;		/* System Interface Control Register */
	u8 res[236];
	u32 control;		/* General Purpose Control Register */
};

/* ep0 transfer state */
#define WAIT_FOR_SETUP          0
#define DATA_STATE_XMIT         1
#define DATA_STATE_NEED_ZLP     2
#define WAIT_FOR_OUT_STATUS     3
#define DATA_STATE_RECV         4

/* Device Controller Capability Parameter register */
#define DCCPARAMS_DC				0x00000080
#define DCCPARAMS_DEN_MASK			0x0000001f

/* Frame Index Register Bit Masks */
#define	USB_FRINDEX_MASKS			(0x3fff)
/* USB CMD  Register Bit Masks */
#define  USB_CMD_RUN_STOP                     (0x00000001)
#define  USB_CMD_CTRL_RESET                   (0x00000002)
#define  USB_CMD_PERIODIC_SCHEDULE_EN         (0x00000010)
#define  USB_CMD_ASYNC_SCHEDULE_EN            (0x00000020)
#define  USB_CMD_INT_AA_DOORBELL              (0x00000040)
#define  USB_CMD_ASP                          (0x00000300)
#define  USB_CMD_ASYNC_SCH_PARK_EN            (0x00000800)
#define  USB_CMD_SUTW                         (0x00002000)
#define  USB_CMD_ATDTW                        (0x00004000)
#define  USB_CMD_ITC                          (0x00FF0000)

/* bit 15,3,2 are frame list size */
#define  USB_CMD_FRAME_SIZE_1024              (0x00000000)
#define  USB_CMD_FRAME_SIZE_512               (0x00000004)
#define  USB_CMD_FRAME_SIZE_256               (0x00000008)
#define  USB_CMD_FRAME_SIZE_128               (0x0000000C)
#define  USB_CMD_FRAME_SIZE_64                (0x00008000)
#define  USB_CMD_FRAME_SIZE_32                (0x00008004)
#define  USB_CMD_FRAME_SIZE_16                (0x00008008)
#define  USB_CMD_FRAME_SIZE_8                 (0x0000800C)

/* bit 9-8 are async schedule park mode count */
#define  USB_CMD_ASP_00                       (0x00000000)
#define  USB_CMD_ASP_01                       (0x00000100)
#define  USB_CMD_ASP_10                       (0x00000200)
#define  USB_CMD_ASP_11                       (0x00000300)
#define  USB_CMD_ASP_BIT_POS                  (8)

/* bit 23-16 are interrupt threshold control */
#define  USB_CMD_ITC_NO_THRESHOLD             (0x00000000)
#define  USB_CMD_ITC_1_MICRO_FRM              (0x00010000)
#define  USB_CMD_ITC_2_MICRO_FRM              (0x00020000)
#define  USB_CMD_ITC_4_MICRO_FRM              (0x00040000)
#define  USB_CMD_ITC_8_MICRO_FRM              (0x00080000)
#define  USB_CMD_ITC_16_MICRO_FRM             (0x00100000)
#define  USB_CMD_ITC_32_MICRO_FRM             (0x00200000)
#define  USB_CMD_ITC_64_MICRO_FRM             (0x00400000)
#define  USB_CMD_ITC_BIT_POS                  (16)

/* USB STS Register Bit Masks */
#define  USB_STS_INT                          (0x00000001)
#define  USB_STS_ERR                          (0x00000002)
#define  USB_STS_PORT_CHANGE                  (0x00000004)
#define  USB_STS_FRM_LST_ROLL                 (0x00000008)
#define  USB_STS_SYS_ERR                      (0x00000010)
#define  USB_STS_IAA                          (0x00000020)
#define  USB_STS_RESET                        (0x00000040)
#define  USB_STS_SOF                          (0x00000080)
#define  USB_STS_SUSPEND                      (0x00000100)
#define  USB_STS_HC_HALTED                    (0x00001000)
#define  USB_STS_RCL                          (0x00002000)
#define  USB_STS_PERIODIC_SCHEDULE            (0x00004000)
#define  USB_STS_ASYNC_SCHEDULE               (0x00008000)

/* USB INTR Register Bit Masks */
#define  USB_INTR_INT_EN                      (0x00000001)
#define  USB_INTR_ERR_INT_EN                  (0x00000002)
#define  USB_INTR_PTC_DETECT_EN               (0x00000004)
#define  USB_INTR_FRM_LST_ROLL_EN             (0x00000008)
#define  USB_INTR_SYS_ERR_EN                  (0x00000010)
#define  USB_INTR_ASYN_ADV_EN                 (0x00000020)
#define  USB_INTR_RESET_EN                    (0x00000040)
#define  USB_INTR_SOF_EN                      (0x00000080)
#define  USB_INTR_DEVICE_SUSPEND              (0x00000100)

/* Device Address bit masks */
#define  USB_DEVICE_ADDRESS_MASK              (0xFE000000)
#define  USB_DEVICE_ADDRESS_BIT_POS           (25)

/* endpoint list address bit masks */
#define USB_EP_LIST_ADDRESS_MASK              (0xfffff800)

/* PORTSCX  Register Bit Masks */
#define  PORTSCX_CURRENT_CONNECT_STATUS       (0x00000001)
#define  PORTSCX_CONNECT_STATUS_CHANGE        (0x00000002)
#define  PORTSCX_PORT_ENABLE                  (0x00000004)
#define  PORTSCX_PORT_EN_DIS_CHANGE           (0x00000008)
#define  PORTSCX_OVER_CURRENT_ACT             (0x00000010)
#define  PORTSCX_OVER_CURRENT_CHG             (0x00000020)
#define  PORTSCX_PORT_FORCE_RESUME            (0x00000040)
#define  PORTSCX_PORT_SUSPEND                 (0x00000080)
#define  PORTSCX_PORT_RESET                   (0x00000100)
#define  PORTSCX_LINE_STATUS_BITS             (0x00000C00)
#define  PORTSCX_PORT_POWER                   (0x00001000)
#define  PORTSCX_PORT_INDICTOR_CTRL           (0x0000C000)
#define  PORTSCX_PORT_TEST_CTRL               (0x000F0000)
#define  PORTSCX_WAKE_ON_CONNECT_EN           (0x00100000)
#define  PORTSCX_WAKE_ON_CONNECT_DIS          (0x00200000)
#define  PORTSCX_WAKE_ON_OVER_CURRENT         (0x00400000)
#define  PORTSCX_PHY_LOW_POWER_SPD            (0x00800000)
#define  PORTSCX_PORT_FORCE_FULL_SPEED        (0x01000000)
#define  PORTSCX_PORT_SPEED_MASK              (0x0C000000)
#define  PORTSCX_PORT_WIDTH                   (0x10000000)
#define  PORTSCX_PHY_TYPE_SEL                 (0xC0000000)

/* bit 11-10 are line status */
#define  PORTSCX_LINE_STATUS_SE0              (0x00000000)
#define  PORTSCX_LINE_STATUS_JSTATE           (0x00000400)
#define  PORTSCX_LINE_STATUS_KSTATE           (0x00000800)
#define  PORTSCX_LINE_STATUS_UNDEF            (0x00000C00)
#define  PORTSCX_LINE_STATUS_BIT_POS          (10)

/* bit 15-14 are port indicator control */
#define  PORTSCX_PIC_OFF                      (0x00000000)
#define  PORTSCX_PIC_AMBER                    (0x00004000)
#define  PORTSCX_PIC_GREEN                    (0x00008000)
#define  PORTSCX_PIC_UNDEF                    (0x0000C000)
#define  PORTSCX_PIC_BIT_POS                  (14)

/* bit 19-16 are port test control */
#define  PORTSCX_PTC_DISABLE                  (0x00000000)
#define  PORTSCX_PTC_JSTATE                   (0x00010000)
#define  PORTSCX_PTC_KSTATE                   (0x00020000)
#define  PORTSCX_PTC_SEQNAK                   (0x00030000)
#define  PORTSCX_PTC_PACKET                   (0x00040000)
#define  PORTSCX_PTC_FORCE_EN                 (0x00050000)
#define  PORTSCX_PTC_BIT_POS                  (16)

/* bit 27-26 are port speed */
#define  PORTSCX_PORT_SPEED_FULL              (0x00000000)
#define  PORTSCX_PORT_SPEED_LOW               (0x04000000)
#define  PORTSCX_PORT_SPEED_HIGH              (0x08000000)
#define  PORTSCX_PORT_SPEED_UNDEF             (0x0C000000)
#define  PORTSCX_SPEED_BIT_POS                (26)

/* OTGSC Register Bit Masks */
#define  OTGSC_ID_CHANGE_IRQ_STS		(1 << 16)
#define  OTGSC_B_SESSION_VALID_IRQ_EN           (1 << 27)
#define  OTGSC_B_SESSION_VALID_IRQ_STS          (1 << 19)
#define  OTGSC_B_SESSION_VALID                  (1 << 11)
#define  OTGSC_A_BUS_VALID			(1 << 9)

/* bit 28 is parallel transceiver width for UTMI interface */
#define  PORTSCX_PTW                          (0x10000000)
#define  PORTSCX_PTW_8BIT                     (0x00000000)
#define  PORTSCX_PTW_16BIT                    (0x10000000)

/* bit 31-30 are port transceiver select */
#define  PORTSCX_PTS_UTMI                     (0x00000000)
#define  PORTSCX_PTS_ULPI                     (0x80000000)
#define  PORTSCX_PTS_FSLS                     (0xC0000000)
#define  PORTSCX_PTS_BIT_POS                  (30)

/* USB MODE Register Bit Masks */
#define  USB_MODE_CTRL_MODE_IDLE              (0x00000000)
#define  USB_MODE_CTRL_MODE_DEVICE            (0x00000002)
#define  USB_MODE_CTRL_MODE_HOST              (0x00000003)
#define  USB_MODE_CTRL_MODE_MASK              0x00000003
#define  USB_MODE_CTRL_MODE_RSV               (0x00000001)
#define  USB_MODE_ES                          0x00000004 /* (big) Endian Sel */
#define  USB_MODE_SETUP_LOCK_OFF              (0x00000008)
#define  USB_MODE_STREAM_DISABLE              (0x00000010)
/* Endpoint Flush Register */
#define EPFLUSH_TX_OFFSET		      (0x00010000)
#define EPFLUSH_RX_OFFSET		      (0x00000000)

/* Endpoint Setup Status bit masks */
#define  EP_SETUP_STATUS_MASK                 (0x0000003F)
#define  EP_SETUP_STATUS_EP0		      (0x00000001)

/* ENDPOINTCTRLx  Register Bit Masks */
#define  EPCTRL_TX_ENABLE                     (0x00800000)
#define  EPCTRL_TX_DATA_TOGGLE_RST            (0x00400000)	/* Not EP0 */
#define  EPCTRL_TX_DATA_TOGGLE_INH            (0x00200000)	/* Not EP0 */
#define  EPCTRL_TX_TYPE                       (0x000C0000)
#define  EPCTRL_TX_DATA_SOURCE                (0x00020000)	/* Not EP0 */
#define  EPCTRL_TX_EP_STALL                   (0x00010000)
#define  EPCTRL_RX_ENABLE                     (0x00000080)
#define  EPCTRL_RX_DATA_TOGGLE_RST            (0x00000040)	/* Not EP0 */
#define  EPCTRL_RX_DATA_TOGGLE_INH            (0x00000020)	/* Not EP0 */
#define  EPCTRL_RX_TYPE                       (0x0000000C)
#define  EPCTRL_RX_DATA_SINK                  (0x00000002)	/* Not EP0 */
#define  EPCTRL_RX_EP_STALL                   (0x00000001)

/* bit 19-18 and 3-2 are endpoint type */
#define  EPCTRL_EP_TYPE_CONTROL               (0)
#define  EPCTRL_EP_TYPE_ISO                   (1)
#define  EPCTRL_EP_TYPE_BULK                  (2)
#define  EPCTRL_EP_TYPE_INTERRUPT             (3)
#define  EPCTRL_TX_EP_TYPE_SHIFT              (18)
#define  EPCTRL_RX_EP_TYPE_SHIFT              (2)

/* SNOOPn Register Bit Masks */
#define  SNOOP_ADDRESS_MASK                   (0xFFFFF000)
#define  SNOOP_SIZE_ZERO                      (0x00)	/* snooping disable */
#define  SNOOP_SIZE_4KB                       (0x0B)	/* 4KB snoop size */
#define  SNOOP_SIZE_8KB                       (0x0C)
#define  SNOOP_SIZE_16KB                      (0x0D)
#define  SNOOP_SIZE_32KB                      (0x0E)
#define  SNOOP_SIZE_64KB                      (0x0F)
#define  SNOOP_SIZE_128KB                     (0x10)
#define  SNOOP_SIZE_256KB                     (0x11)
#define  SNOOP_SIZE_512KB                     (0x12)
#define  SNOOP_SIZE_1MB                       (0x13)
#define  SNOOP_SIZE_2MB                       (0x14)
#define  SNOOP_SIZE_4MB                       (0x15)
#define  SNOOP_SIZE_8MB                       (0x16)
#define  SNOOP_SIZE_16MB                      (0x17)
#define  SNOOP_SIZE_32MB                      (0x18)
#define  SNOOP_SIZE_64MB                      (0x19)
#define  SNOOP_SIZE_128MB                     (0x1A)
#define  SNOOP_SIZE_256MB                     (0x1B)
#define  SNOOP_SIZE_512MB                     (0x1C)
#define  SNOOP_SIZE_1GB                       (0x1D)
#define  SNOOP_SIZE_2GB                       (0x1E)	/* 2GB snoop size */

/* pri_ctrl Register Bit Masks */
#define  PRI_CTRL_PRI_LVL1                    (0x0000000C)
#define  PRI_CTRL_PRI_LVL0                    (0x00000003)

/* si_ctrl Register Bit Masks */
#define  SI_CTRL_ERR_DISABLE                  (0x00000010)
#define  SI_CTRL_IDRC_DISABLE                 (0x00000008)
#define  SI_CTRL_RD_SAFE_EN                   (0x00000004)
#define  SI_CTRL_RD_PREFETCH_DISABLE          (0x00000002)
#define  SI_CTRL_RD_PREFEFETCH_VAL            (0x00000001)

/* control Register Bit Masks */
#define  USB_CTRL_IOENB                       (0x00000004)
#define  USB_CTRL_ULPI_INT0EN                 (0x00000001)
#define  USB_CTRL_OTG_WUIR                   (0x80000000)
#define  USB_CTRL_OTG_WUIE                   (0x08000000)
#define  USB_CTRL_OTG_VWUE			(0x00001000)
#define  USB_CTRL_OTG_IWUE			(0x00100000)

/* PHY control0 Register Bit Masks */
#define	PHY_CTRL0_CONF2			(1 << 26)
#define PHY_CTRL0_USBEN			(1 << 24) /* USB UTMI PHY Enable */

/* USB UH2 CTRL Register Bits */
#define USB_UH2_OVBWK_EN		(1 << 6) /* OTG VBUS Wakeup Enable */
#define USB_UH2_OIDWK_EN		(1 << 5) /* OTG ID Wakeup Enable */
/*!
 * Endpoint Queue Head data struct
 * Rem: all the variables of qh are LittleEndian Mode
 * and NEXT_POINTER_MASK should operate on a LittleEndian, Phy Addr
 */
struct ep_queue_head {
	/*!
	 * Mult(31-30) , Zlt(29) , Max Pkt len  and IOS(15)
	 */
	u32 max_pkt_length;

	/*!
	 *  Current dTD Pointer(31-5)
	 */
	u32 curr_dtd_ptr;

	/*!
	 *  Next dTD Pointer(31-5), T(0)
	 */
	u32 next_dtd_ptr;

	/*!
	 *  Total bytes (30-16), IOC (15), MultO(11-10), STS (7-0)
	 */
	u32 size_ioc_int_sts;

	/*!
	 * Buffer pointer Page 0 (31-12)
	 */
	u32 buff_ptr0;

	/*!
	 * Buffer pointer Page 1 (31-12)
	 */
	u32 buff_ptr1;

	/*!
	 * Buffer pointer Page 2 (31-12)
	 */
	u32 buff_ptr2;

	/*!
	 * Buffer pointer Page 3 (31-12)
	 */
	u32 buff_ptr3;

	/*!
	 * Buffer pointer Page 4 (31-12)
	 */
	u32 buff_ptr4;

	/*!
	 * reserved field 1
	 */
	u32 res1;
	/*!
	 * Setup data 8 bytes
	 */
	u8 setup_buffer[8];	/* Setup data 8 bytes */

	/*!
	 * reserved field 2,pad out to 64 bytes
	 */
	u32 res2[4];
};

/* Endpoint Queue Head Bit Masks */
#define  EP_QUEUE_HEAD_MULT_POS               (30)
#define  EP_QUEUE_HEAD_ZLT_SEL                (0x20000000)
#define  EP_QUEUE_HEAD_MAX_PKT_LEN_POS        (16)
#define  EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)   (((ep_info)>>16)&0x07ff)
#define  EP_QUEUE_HEAD_IOS                    (0x00008000)
#define  EP_QUEUE_HEAD_NEXT_TERMINATE         (0x00000001)
#define  EP_QUEUE_HEAD_IOC                    (0x00008000)
#define  EP_QUEUE_HEAD_MULTO                  (0x00000C00)
#define  EP_QUEUE_HEAD_STATUS_HALT	      (0x00000040)
#define  EP_QUEUE_HEAD_STATUS_ACTIVE          (0x00000080)
#define  EP_QUEUE_CURRENT_OFFSET_MASK         (0x00000FFF)
#define  EP_QUEUE_HEAD_NEXT_POINTER_MASK      0xFFFFFFE0
#define  EP_QUEUE_FRINDEX_MASK                (0x000007FF)
#define  EP_MAX_LENGTH_TRANSFER               (0x4000)

/*!
 * Endpoint Transfer Descriptor data struct
 *  Rem: all the variables of td are LittleEndian Mode
 *       must be 32-byte aligned
 */
struct ep_td_struct {
	/*!
	 *  Next TD pointer(31-5), T(0) set indicate invalid
	 */
	u32 next_td_ptr;

	/*!
	 *  Total bytes (30-16), IOC (15),MultO(11-10), STS (7-0)
	 */
	u32 size_ioc_sts;

	/*!
	 * Buffer pointer Page 0
	 */
	u32 buff_ptr0;

	/*!
	 * Buffer pointer Page 1
	 */
	u32 buff_ptr1;

	/*!
	 * Buffer pointer Page 2
	 */
	u32 buff_ptr2;

	/*!
	 * Buffer pointer Page 3
	 */
	u32 buff_ptr3;

	/*!
	 * Buffer pointer Page 4
	 */
	u32 buff_ptr4;

	/*!
	 * dma address of this td
	 * */
	dma_addr_t td_dma;

	/*!
	 * virtual address of next td
	 * */
	struct ep_td_struct *next_td_virt;

	/*!
	 * make it an even 16 words
	 * */
	u32 res[7];
};

/*!
 * Endpoint Transfer Descriptor bit Masks
 */
#define  DTD_NEXT_TERMINATE                   (0x00000001)
#define  DTD_IOC                              (0x00008000)
#define  DTD_STATUS_ACTIVE                    (0x00000080)
#define  DTD_STATUS_HALTED                    (0x00000040)
#define  DTD_STATUS_DATA_BUFF_ERR             (0x00000020)
#define  DTD_STATUS_TRANSACTION_ERR           (0x00000008)
#define  DTD_RESERVED_FIELDS                  (0x80007300)
#define  DTD_ADDR_MASK                        0xFFFFFFE0
#define  DTD_PACKET_SIZE                      (0x7FFF0000)
#define  DTD_LENGTH_BIT_POS                   (16)
#define  DTD_ERROR_MASK                       (DTD_STATUS_HALTED | \
				DTD_STATUS_DATA_BUFF_ERR | \
				DTD_STATUS_TRANSACTION_ERR)
/* Alignment requirements; must be a power of two */
#define DTD_ALIGNMENT				0x20
#define QH_ALIGNMENT				2048

/* Controller dma boundary */
#define UDC_DMA_BOUNDARY			0x1000

/* -----------------------------------------------------------------------*/
/* ##### enum data
*/
typedef enum {
	e_ULPI,
	e_UTMI_8BIT,
	e_UTMI_16BIT,
	e_SERIAL
} e_PhyInterface;

/*-------------------------------------------------------------------------*/

struct fsl_req {
	struct usb_request req;
	struct list_head queue;
	/* ep_queue() func will add
	   a request->queue into a udc_ep->queue 'd tail */
	struct fsl_ep *ep;
	unsigned mapped;

	struct ep_td_struct *head, *tail;	/* For dTD List
						   this is a BigEndian Virtual addr */
	unsigned int dtd_count;
	/* just for IRAM patch */
	dma_addr_t oridma;	/* original dma */
	size_t buffer_offset;	/* offset of user buffer */
	int last_one;		/* mark if reach to last packet */
	struct ep_td_struct *cur;	/* current tranfer dtd */
};

#define REQ_UNCOMPLETE		(1)

struct fsl_ep {
	struct usb_ep ep;
	struct list_head queue;
	struct fsl_udc *udc;
	struct ep_queue_head *qh;
	const struct usb_endpoint_descriptor *desc;
	struct usb_gadget *gadget;

	char name[14];
	unsigned stopped:1;
};

#define EP_DIR_IN	1
#define EP_DIR_OUT	0

struct fsl_udc {
	struct usb_gadget gadget;
	struct usb_gadget_driver *driver;
	struct fsl_usb2_platform_data *pdata;
	struct fsl_ep *eps;
	unsigned int max_ep;
	unsigned int irq;

	struct usb_ctrlrequest local_setup_buff;
	spinlock_t lock;
	u32 xcvr_type;
	struct otg_transceiver *transceiver;
	unsigned softconnect:1;
	unsigned vbus_active:1;
	unsigned remote_wakeup:1;
	/* we must distinguish the stopped and suspended state,
	 * stopped means the udc enter lowpower mode, suspended
	 * means the udc is suspended by system pm or by otg
	 * switching to host mode.if the udc in suspended state
	 * it also in the stopped state, while if the udc in
	 * stopped state,it may not be in the suspended state*/
	unsigned stopped:1;
	int suspended;

	struct ep_queue_head *ep_qh;	/* Endpoints Queue-Head */
	struct fsl_req *status_req;	/* ep0 status request */
	struct fsl_req *data_req;	/* ep0 data request */
	struct dma_pool *td_pool;	/* dma pool for DTD */
	enum fsl_usb2_phy_modes phy_mode;

	size_t ep_qh_size;		/* size after alignment adjustment*/
	dma_addr_t ep_qh_dma;		/* dma address of QH */

	u32 max_pipes;		/* Device max pipes */
	u32 max_use_endpts;	/* Max endpointes to be used */
	u32 bus_reset;		/* Device is bus reseting */
	u32 resume_state;	/* USB state to resume */
	u32 usb_state;		/* USB current state */
	u32 usb_next_state;	/* USB next state */
	u32 ep0_dir;		/* Endpoint zero direction: can be
				   USB_DIR_IN or USB_DIR_OUT */
	u32 usb_sof_count;	/* SOF count */
	u32 errors;		/* USB ERRORs count */
	u8 device_address;	/* Device USB address */

	struct completion *done;	/* to make sure release() is done */
	u32 iram_buffer[IRAM_PPH_NTD];
	void *iram_buffer_v[IRAM_PPH_NTD];
	struct work_struct gadget_work;
	struct delayed_work gadget_delay_work;
};

/*-------------------------------------------------------------------------*/

#ifdef DEBUG
#define DBG(fmt, args...) 	printk(KERN_DEBUG "[%s]  " fmt "\n", \
				__func__, ## args)
#else
#define DBG(fmt, args...)	do {} while (0)
#endif

#if 0
static void dump_msg(const char *label, const u8 * buf, unsigned int length)
{
	unsigned int start, num, i;
	char line[52], *p;

	if (length >= 512)
		return;
	pr_debug("udc: %s, length %u:\n", label, length);
	start = 0;
	while (length > 0) {
		num = min(length, 16u);
		p = line;
		for (i = 0; i < num; ++i) {
			if (i == 8)
				*p++ = ' ';
			sprintf(p, " %02x", buf[i]);
			p += 3;
		}
		*p = 0;
		printk(KERN_DEBUG "%6x: %s\n", start, line);
		buf += num;
		start += num;
		length -= num;
	}
}
#endif

#ifdef VERBOSE
#define VDBG		DBG
#else
#define VDBG(stuff...)	do {} while (0)
#endif

#define ERR(stuff...)		printk(KERN_ERR "udc: " stuff)
#define INFO(stuff...)		printk(KERN_INFO "udc: " stuff)

/*-------------------------------------------------------------------------*/

/* ### Add board specific defines here
 */

/*
 * ### pipe direction macro from device view
 */
#define USB_RECV	(0)	/* OUT EP */
#define USB_SEND	(1)	/* IN EP */

/*
 * ### internal used help routines.
 */
#define ep_index(EP)         ((EP)->desc->bEndpointAddress&0xF)
#define ep_maxpacket(EP)     ((EP)->ep.maxpacket)

#define ep_is_in(EP)	((ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
				USB_DIR_IN) : ((EP)->desc->bEndpointAddress \
				& USB_DIR_IN) == USB_DIR_IN)

#define get_ep_by_pipe(udc, pipe)	((pipe == 1) ? &udc->eps[0] : \
					&udc->eps[pipe])
#define get_pipe_by_windex(windex)	((windex & USB_ENDPOINT_NUMBER_MASK) \
					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))

/* Bulk only class request */
#define USB_BULK_RESET_REQUEST          0xff

#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_ARCH_STMP3XXX) || \
	defined(CONFIG_ARCH_MXS)
#include <mach/fsl_usb_gadget.h>
#elif defined (CONFIG_PPC32)
#include <asm/fsl_usb_gadget.h>
#endif

#endif				/* __ARCOTG_UDC_H */