1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
|
/*
* Copyright (c) 2005 MontaVista Software
* Copyright (C) 2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
* by Hunter Wu.
*/
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
#include <linux/usb/hcd.h>
#include "../core/usb.h"
#include "ehci-fsl.h"
#include <mach/fsl_usb.h>
extern void usb_host_set_wakeup(struct device *wkup_dev, bool para);
static void fsl_usb_lowpower_mode(struct fsl_usb2_platform_data *pdata, bool enable)
{
unsigned long flags;
spin_lock_irqsave(&pdata->lock, flags);
if (enable) {
if (pdata->phy_lowpower_suspend)
pdata->phy_lowpower_suspend(pdata, true);
} else {
if (pdata->phy_lowpower_suspend)
pdata->phy_lowpower_suspend(pdata, false);
}
pdata->lowpower = enable;
spin_unlock_irqrestore(&pdata->lock, flags);
}
static void fsl_usb_clk_gate(struct fsl_usb2_platform_data *pdata, bool enable)
{
if (pdata->usb_clock_for_pm)
pdata->usb_clock_for_pm(enable);
}
#undef EHCI_PROC_PTC
#ifdef EHCI_PROC_PTC /* /proc PORTSC:PTC support */
/*
* write a PORTSC:PTC value to /proc/driver/ehci-ptc
* to put the controller into test mode.
*/
#include <linux/proc_fs.h>
#include <asm/uaccess.h>
#define EFPSL 3 /* ehci fsl proc string length */
static int ehci_fsl_proc_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
{
return 0;
}
static int ehci_fsl_proc_write(struct file *file, const char __user *buffer,
unsigned long count, void *data)
{
int ptc;
u32 portsc;
struct ehci_hcd *ehci = (struct ehci_hcd *) data;
char str[EFPSL] = {0};
if (count > EFPSL-1)
return -EINVAL;
if (copy_from_user(str, buffer, count))
return -EFAULT;
str[count] = '\0';
ptc = simple_strtoul(str, NULL, 0);
portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
portsc &= ~(0xf << 16);
portsc |= (ptc << 16);
printk(KERN_INFO "PTC %x portsc %08x\n", ptc, portsc);
ehci_writel(ehci, portsc, &ehci->regs->port_status[0]);
return count;
}
static int ehci_testmode_init(struct ehci_hcd *ehci)
{
struct proc_dir_entry *entry;
entry = create_proc_read_entry("driver/ehci-ptc", 0644, NULL,
ehci_fsl_proc_read, ehci);
if (!entry)
return -ENODEV;
entry->write_proc = ehci_fsl_proc_write;
return 0;
}
#else
static int ehci_testmode_init(struct ehci_hcd *ehci)
{
return 0;
}
#endif /* /proc PORTSC:PTC support */
/**
* The hcd operation need to be done during the wakeup irq
*/
void fsl_usb_recover_hcd(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 cmd = 0;
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* After receive remote wakeup signaling. Must restore
* CMDRUN bit in 20ms to keep port status.
*/
cmd = ehci_readl(ehci, &ehci->regs->command);
if (!(cmd & CMD_RUN) || (hcd->state == HC_STATE_SUSPENDED)) {
ehci_writel(ehci, ehci->command, &ehci->regs->command);
/* Resume root hub here? */
usb_hcd_resume_root_hub(hcd);
}
/* disable all interrupt, will re-enable in resume */
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
}
/**
* This irq is used to open the hw access and let usb_hcd_irq process the usb event
* ehci_fsl_pre_irq will be called before usb_hcd_irq
* The hcd operation need to be done during the wakeup irq
*/
static irqreturn_t ehci_fsl_pre_irq(int irq, void *dev)
{
struct platform_device *pdev = (struct platform_device *)dev;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct fsl_usb2_platform_data *pdata;
pdata = hcd->self.controller->platform_data;
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
if (pdata->irq_delay || (pdata->wakeup_event == WAKEUP_EVENT_VBUS)
|| (pdata->wakeup_event == WAKEUP_EVENT_INVALID))
return IRQ_NONE;
pr_debug("%s\n", __func__);
pdata->wakeup_event = WAKEUP_EVENT_INVALID;
fsl_usb_recover_hcd(pdev);
return IRQ_HANDLED;
} else {
u32 portsc = 0;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
/* PORT_USB11 macro is used to judge line state K*/
if ((PORT_USB11(portsc)) && (portsc & PORT_SUSPEND)) {
pdata = hcd->self.controller->platform_data;
if (pdata->platform_resume)
pdata->platform_resume(pdata);
}
}
return IRQ_NONE;
}
/**
* usb_hcd_fsl_probe - initialize FSL-based HCDs
* @drvier: Driver to be used for this HCD
* @pdev: USB Host Controller being probed
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller.
*
*/
int usb_hcd_fsl_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
struct usb_hcd *hcd;
struct resource *res;
struct ehci_hcd *ehci;
int irq;
int retval;
pr_debug("initializing FSL-SOC USB Controller\n");
/* Need platform data for setup */
pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev,
"No platform data for %s.\n", dev_name(&pdev->dev));
return -ENODEV;
}
/*
* This is a host mode driver, verify that we're supposed to be
* in host mode.
*/
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
(pdata->operating_mode == FSL_USB2_MPH_HOST) ||
(pdata->operating_mode == FSL_USB2_DR_OTG))) {
dev_err(&pdev->dev,
"Non Host Mode configured for %s. Wrong driver linked.\n",
dev_name(&pdev->dev));
return -ENODEV;
}
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
goto err1;
}
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_err(&pdev->dev,
"Found HC with no IRQ. Check %s setup!\n",
dev_name(&pdev->dev));
return -ENODEV;
}
irq = res->start;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (pdata->operating_mode != FSL_USB2_DR_OTG) {
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
retval = -EBUSY;
goto err2;
}
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&pdev->dev, "error mapping memory\n");
retval = -EFAULT;
goto err3;
}
pdata->regs = hcd->regs;
/*
* do platform specific init: check the clock, grab/config pins, etc.
*/
if (pdata->init && pdata->init(pdev)) {
retval = -ENODEV;
goto err4;
}
fsl_platform_set_host_mode(hcd);
hcd->power_budget = pdata->power_budget;
ehci = hcd_to_ehci(hcd);
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
dbg("pdev=0x%p hcd=0x%p ehci=0x%p\n", pdev, hcd, ehci);
ehci->transceiver = otg_get_transceiver();
dbg("ehci->transceiver=0x%p\n", ehci->transceiver);
if (!ehci->transceiver) {
printk(KERN_ERR "can't find transceiver\n");
retval = -ENODEV;
goto err4;
}
retval = otg_set_host(ehci->transceiver, &ehci_to_hcd(ehci)->self);
if (retval)
otg_put_transceiver(ehci->transceiver);
} else if ((pdata->operating_mode == FSL_USB2_MPH_HOST) || \
(pdata->operating_mode == FSL_USB2_DR_HOST))
fsl_platform_set_vbus_power(pdata, 1);
/*
* The ehci_fsl_pre_irq must be registered before usb_hcd_irq, in that case
* it can be called before usb_hcd_irq when irq occurs
*/
retval = request_irq(irq, ehci_fsl_pre_irq, IRQF_SHARED,
"fsl ehci pre interrupt", (void *)pdev);
if (retval != 0)
goto err5;
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
fsl_platform_set_ahb_burst(hcd);
ehci_testmode_init(hcd_to_ehci(hcd));
/*
* Only for HSIC host controller, let HSCI controller
* connect with device, call it after EHCI initialization
* finishes.
*/
if (pdata->hsic_post_ops)
pdata->hsic_post_ops();
ehci = hcd_to_ehci(hcd);
pdata->pm_command = ehci->command;
spin_lock_init(&pdata->lock);
return retval;
err6:
free_irq(irq, (void *)pdev);
err5:
otg_put_transceiver(ehci->transceiver);
err4:
iounmap(hcd->regs);
err3:
if (pdata->operating_mode != FSL_USB2_DR_OTG)
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err2:
usb_put_hcd(hcd);
err1:
dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
if (pdata->exit)
pdata->exit(pdata->pdev);
return retval;
}
/**
* usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_fsl_probe().
*
*/
static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
u32 tmp;
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
/* Need open clock for register access */
if (pdata->usb_clock_for_pm)
pdata->usb_clock_for_pm(true);
tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
if (tmp & PORT_PTS_PHCD) {
tmp &= ~PORT_PTS_PHCD;
ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
msleep(100);
if (pdata->usb_clock_for_pm)
pdata->usb_clock_for_pm(false);
}
}
/* DDD shouldn't we turn off the power here? */
fsl_platform_set_vbus_power(pdata, 0);
if (ehci->transceiver) {
(void)otg_set_host(ehci->transceiver, 0);
otg_put_transceiver(ehci->transceiver);
} else {
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
}
/*disable the host wakeup and put phy to low power mode */
usb_host_set_wakeup(hcd->self.controller, false);
fsl_usb_lowpower_mode(pdata, true);
/*free the ehci_fsl_pre_irq */
free_irq(hcd->irq, (void *)pdev);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
/*
* do platform specific un-initialization:
* release iomux pins clocks, etc.
*/
if (pdata->exit)
pdata->exit(pdata->pdev);
iounmap(hcd->regs);
}
static void fsl_setup_phy(struct ehci_hcd *ehci,
enum fsl_usb2_phy_modes phy_mode, int port_offset)
{
u32 portsc;
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
portsc |= PORT_PTS_ULPI;
break;
case FSL_USB2_PHY_SERIAL:
portsc |= PORT_PTS_SERIAL;
break;
case FSL_USB2_PHY_UTMI_WIDE:
portsc |= PORT_PTS_PTW;
/* fall through */
case FSL_USB2_PHY_UTMI:
portsc |= PORT_PTS_UTMI;
break;
/* HSIC */
case FSL_USB2_PHY_HSIC:
portsc |= PORT_PTS_HSIC;
break;
case FSL_USB2_PHY_NONE:
break;
}
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
}
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
fsl_platform_usb_setup(ehci);
ehci_port_power(ehci, 0);
return 0;
}
static int ehci_fsl_bus_suspend(struct usb_hcd *hcd)
{
int ret = 0;
struct fsl_usb2_platform_data *pdata;
u32 tmp, portsc, cmd;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
pdata = hcd->self.controller->platform_data;
printk(KERN_DEBUG "%s begins, %s\n", __func__, pdata->name);
/* the host is already at low power mode */
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
return 0;
}
portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
ret = ehci_bus_suspend(hcd);
if (ret != 0)
return ret;
cmd = ehci_readl(ehci, &ehci->regs->command);
if ((portsc & PORT_CONNECT) && ((cmd & CMD_RUN) == 0)) {
tmp = ehci_readl(ehci, &ehci->regs->command);
tmp |= CMD_RUN;
ehci_writel(ehci, tmp, &ehci->regs->command);
/* on MX6Q, it need a short delay between set RUNSTOP
* and set PHCD
*/
udelay(125);
}
if (pdata->platform_suspend)
pdata->platform_suspend(pdata);
usb_host_set_wakeup(hcd->self.controller, true);
fsl_usb_lowpower_mode(pdata, true);
fsl_usb_clk_gate(hcd->self.controller->platform_data, false);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
printk(KERN_DEBUG "%s ends, %s\n", __func__, pdata->name);
return ret;
}
static int ehci_fsl_bus_resume(struct usb_hcd *hcd)
{
int ret = 0;
struct fsl_usb2_platform_data *pdata;
pdata = hcd->self.controller->platform_data;
printk(KERN_DEBUG "%s begins, %s\n", __func__, pdata->name);
/*
* At otg mode, it should not call host resume for usb gadget device
* Otherwise, this usb device can't be recognized as a gadget
*/
if (hcd->self.is_b_host) {
return -ESHUTDOWN;
}
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
fsl_usb_clk_gate(hcd->self.controller->platform_data, true);
usb_host_set_wakeup(hcd->self.controller, false);
fsl_usb_lowpower_mode(pdata, false);
}
if (pdata->platform_resume)
pdata->platform_resume(pdata);
ret = ehci_bus_resume(hcd);
if (ret)
return ret;
printk(KERN_DEBUG "%s ends, %s\n", __func__, pdata->name);
return ret;
}
static void ehci_fsl_shutdown(struct usb_hcd *hcd)
{
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
fsl_usb_clk_gate(hcd->self.controller->platform_data, true);
}
/* Disable wakeup event first */
usb_host_set_wakeup(hcd->self.controller, false);
ehci_shutdown(hcd);
if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
fsl_usb_clk_gate(hcd->self.controller->platform_data, false);
}
}
/* called during probe() after chip reset completes */
static int ehci_fsl_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
retval = ehci_halt(ehci);
if (retval)
return retval;
/* data structure init */
retval = ehci_init(hcd);
if (retval)
return retval;
hcd->has_tt = 1;
ehci->sbrn = 0x20;
ehci_reset(ehci);
retval = ehci_fsl_reinit(ehci);
return retval;
}
/* called after hcd send port_reset cmd */
static int ehci_fsl_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
{
struct fsl_usb2_platform_data *pdata;
pdata = hcd->self.controller->platform_data;
if (pdata->hsic_device_connected)
pdata->hsic_device_connected();
return 0;
}
static const struct hc_driver ehci_fsl_hc_driver = {
.description = hcd_name,
.product_desc = "Freescale On-Chip EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
.flags = HCD_USB2,
/*
* basic lifecycle operations
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_fsl_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_fsl_bus_suspend,
.bus_resume = ehci_fsl_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
.reset_device = ehci_fsl_reset_device,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
{
if (usb_disabled())
return -ENODEV;
/* FIXME we only want one one probe() not two */
return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
}
static int ehci_fsl_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
/* FIXME we only want one one remove() not two */
usb_hcd_fsl_remove(hcd, pdev);
return 0;
}
#ifdef CONFIG_PM
static bool host_can_wakeup_system(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
if (pdata->operating_mode == FSL_USB2_DR_OTG)
if (device_may_wakeup(ehci->transceiver->dev))
return true;
else
return false;
else
if (device_may_wakeup(&(pdev->dev)))
return true;
else
return false;
}
/* suspend/resume, section 4.3 */
/* These routines rely on the bus (pci, platform, etc)
* to handle powerdown and wakeup, and currently also on
* transceivers that don't need any software attention to set up
* the right sort of wakeup.
*
* They're also used for turning on/off the port when doing OTG.
*/
static int ehci_fsl_drv_suspend(struct platform_device *pdev,
pm_message_t message)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct usb_device *roothub = hcd->self.root_hub;
u32 port_status;
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
printk(KERN_DEBUG "USB Host suspend begins\n");
/* Only handles OTG mode switch event, system suspend event will be done in bus suspend */
if (pdata->pmflags == 0) {
printk(KERN_DEBUG "%s, pm event \n", __func__);
if (!host_can_wakeup_system(pdev)) {
/* Need open clock for register access */
fsl_usb_clk_gate(hcd->self.controller->platform_data, true);
usb_host_set_wakeup(hcd->self.controller, false);
fsl_usb_clk_gate(hcd->self.controller->platform_data, false);
}
printk(KERN_DEBUG "host suspend ends\n");
return 0;
}
/* only the otg host can go here */
/* wait for all usb device on the hcd dettached */
usb_lock_device(roothub);
if (roothub->children[0] != NULL) {
int old = hcd->self.is_b_host;
printk(KERN_DEBUG "will resume roothub and its children\n");
hcd->self.is_b_host = 0;
/* resume the roothub, so that it can test the children is disconnected */
if (roothub->state == USB_STATE_SUSPENDED)
usb_resume(&roothub->dev, PMSG_USER_SUSPEND);
/* we must do unlock here, the hubd thread will hold the same lock
* here release the lock, so that the hubd thread can process the usb
* disconnect event and set the children[0] be NULL, or there will be
* a deadlock */
usb_unlock_device(roothub);
while (roothub->children[0] != NULL)
msleep(1);
usb_lock_device(roothub);
hcd->self.is_b_host = old;
}
usb_unlock_device(roothub);
if (!(hcd->state & HC_STATE_SUSPENDED)) {
printk(KERN_DEBUG "will suspend roothub and its children\n");
usb_lock_device(roothub);
usb_suspend(&roothub->dev, PMSG_USER_SUSPEND);
usb_unlock_device(roothub);
}
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
fsl_usb_clk_gate(hcd->self.controller->platform_data, true);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
}
port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
/* save EHCI registers */
pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
pdata->pm_command &= ~CMD_RUN;
pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
pdata->pm_configured_flag =
ehci_readl(ehci, &ehci->regs->configured_flag);
pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
/* clear the W1C bits */
pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
/* clear PHCD bit */
pdata->pm_portsc &= ~PORT_PTS_PHCD;
usb_host_set_wakeup(hcd->self.controller, true);
fsl_usb_lowpower_mode(pdata, true);
if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
fsl_usb_clk_gate(hcd->self.controller->platform_data, false);
}
pdata->pmflags = 0;
printk(KERN_DEBUG "host suspend ends\n");
return 0;
}
static int ehci_fsl_drv_resume(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct usb_device *roothub = hcd->self.root_hub;
unsigned long flags;
u32 tmp;
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
struct fsl_usb2_wakeup_platform_data *wake_up_pdata = pdata->wakeup_pdata;
/* Only handles OTG mode switch event */
printk(KERN_DEBUG "ehci fsl drv resume begins: %s\n", pdata->name);
if (pdata->pmflags == 0) {
printk(KERN_DEBUG "%s,pm event, wait for wakeup irq if needed\n", __func__);
wait_event_interruptible(wake_up_pdata->wq, !wake_up_pdata->usb_wakeup_is_pending);
if (!host_can_wakeup_system(pdev)) {
/* Need open clock for register access */
fsl_usb_clk_gate(hcd->self.controller->platform_data, true);
usb_host_set_wakeup(hcd->self.controller, true);
#ifndef NO_FIX_DISCONNECT_ISSUE
/*Unplug&plug device during suspend without remote wakeup enabled
For Low and full speed device, we should power on and power off
the USB port to make sure USB internal state machine work well.
*/
tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
if ((tmp & PORT_CONNECT) && !(tmp & PORT_SUSPEND) &&
((tmp & (0x3<<26)) != (0x2<<26))) {
printk(KERN_DEBUG "%s will do power off and power on port.\n", pdata->name);
ehci_writel(ehci, tmp & ~(PORT_RWC_BITS | PORT_POWER),
&ehci->regs->port_status[0]);
ehci_writel(ehci, tmp | PORT_POWER,
&ehci->regs->port_status[0]);
}
#endif
fsl_usb_clk_gate(hcd->self.controller->platform_data, false);
}
return 0;
}
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
fsl_usb_clk_gate(hcd->self.controller->platform_data, true);
usb_host_set_wakeup(hcd->self.controller, false);
fsl_usb_lowpower_mode(pdata, false);
}
spin_lock_irqsave(&ehci->lock, flags);
/* set host mode */
fsl_platform_set_host_mode(hcd);
/* restore EHCI registers */
ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
ehci_writel(ehci, pdata->pm_configured_flag,
&ehci->regs->configured_flag);
tmp = ehci_readl(ehci, &ehci->regs->command);
tmp |= CMD_RUN;
ehci_writel(ehci, tmp, &ehci->regs->command);
spin_unlock_irqrestore(&ehci->lock, flags);
if ((hcd->state & HC_STATE_SUSPENDED)) {
printk(KERN_DEBUG "will resume roothub and its children\n");
usb_lock_device(roothub);
usb_resume(&roothub->dev, PMSG_USER_RESUME);
usb_unlock_device(roothub);
}
pdata->pmflags = 0;
printk(KERN_DEBUG "ehci fsl drv resume ends: %s\n", pdata->name);
return 0;
}
#endif
MODULE_ALIAS("platform:fsl-ehci");
static struct platform_driver ehci_fsl_driver = {
.probe = ehci_fsl_drv_probe,
.remove = ehci_fsl_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ehci_fsl_drv_suspend,
.resume = ehci_fsl_drv_resume,
#endif
.driver = {
.name = "fsl-ehci",
},
};
|