1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
|
/*
* AMD Geode definitions
* Copyright (C) 2006, Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*/
#ifndef _ASM_GEODE_H_
#define _ASM_GEODE_H_
#include <asm/processor.h>
#include <linux/io.h>
/* Generic southbridge functions */
#define GEODE_DEV_PMS 0
#define GEODE_DEV_ACPI 1
#define GEODE_DEV_GPIO 2
#define GEODE_DEV_MFGPT 3
extern int geode_get_dev_base(unsigned int dev);
/* Useful macros */
#define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS)
#define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI)
#define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO)
#define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT)
/* MSRS */
#define MSR_GLIU_P2D_RO0 0x10000029
#define MSR_LX_GLD_MSR_CONFIG 0x48002001
#define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data
* sheet has the wrong value */
#define MSR_GLCP_SYS_RSTPLL 0x4C000014
#define MSR_GLCP_DOTPLL 0x4C000015
#define MSR_LBAR_SMB 0x5140000B
#define MSR_LBAR_GPIO 0x5140000C
#define MSR_LBAR_MFGPT 0x5140000D
#define MSR_LBAR_ACPI 0x5140000E
#define MSR_LBAR_PMS 0x5140000F
#define MSR_DIVIL_SOFT_RESET 0x51400017
#define MSR_PIC_YSEL_LOW 0x51400020
#define MSR_PIC_YSEL_HIGH 0x51400021
#define MSR_PIC_ZSEL_LOW 0x51400022
#define MSR_PIC_ZSEL_HIGH 0x51400023
#define MSR_MFGPT_IRQ 0x51400028
#define MSR_MFGPT_NR 0x51400029
#define MSR_MFGPT_SETUP 0x5140002B
#define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */
#define MSR_GX_GLD_MSR_CONFIG 0xC0002001
#define MSR_GX_MSR_PADSEL 0xC0002011
/* Resource Sizes */
#define LBAR_GPIO_SIZE 0xFF
#define LBAR_MFGPT_SIZE 0x40
#define LBAR_ACPI_SIZE 0x40
#define LBAR_PMS_SIZE 0x80
/* ACPI registers (PMS block) */
/*
* PM1_EN is only valid when VSA is enabled for 16 bit reads.
* When VSA is not enabled, *always* read both PM1_STS and PM1_EN
* with a 32 bit read at offset 0x0
*/
#define PM1_STS 0x00
#define PM1_EN 0x02
#define PM1_CNT 0x08
#define PM2_CNT 0x0C
#define PM_TMR 0x10
#define PM_GPE0_STS 0x18
#define PM_GPE0_EN 0x1C
/* PMC registers (PMS block) */
#define PM_SSD 0x00
#define PM_SCXA 0x04
#define PM_SCYA 0x08
#define PM_OUT_SLPCTL 0x0C
#define PM_SCLK 0x10
#define PM_SED 0x1
#define PM_SCXD 0x18
#define PM_SCYD 0x1C
#define PM_IN_SLPCTL 0x20
#define PM_WKD 0x30
#define PM_WKXD 0x34
#define PM_RD 0x38
#define PM_WKXA 0x3C
#define PM_FSD 0x40
#define PM_TSD 0x44
#define PM_PSD 0x48
#define PM_NWKD 0x4C
#define PM_AWKD 0x50
#define PM_SSC 0x54
/* VSA2 magic values */
#define VSA_VRC_INDEX 0xAC1C
#define VSA_VRC_DATA 0xAC1E
#define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
#define VSA_VR_SIGNATURE 0x0003
#define VSA_VR_MEM_SIZE 0x0200
#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
/* GPIO */
#define GPIO_OUTPUT_VAL 0x00
#define GPIO_OUTPUT_ENABLE 0x04
#define GPIO_OUTPUT_OPEN_DRAIN 0x08
#define GPIO_OUTPUT_INVERT 0x0C
#define GPIO_OUTPUT_AUX1 0x10
#define GPIO_OUTPUT_AUX2 0x14
#define GPIO_PULL_UP 0x18
#define GPIO_PULL_DOWN 0x1C
#define GPIO_INPUT_ENABLE 0x20
#define GPIO_INPUT_INVERT 0x24
#define GPIO_INPUT_FILTER 0x28
#define GPIO_INPUT_EVENT_COUNT 0x2C
#define GPIO_READ_BACK 0x30
#define GPIO_INPUT_AUX1 0x34
#define GPIO_EVENTS_ENABLE 0x38
#define GPIO_LOCK_ENABLE 0x3C
#define GPIO_POSITIVE_EDGE_EN 0x40
#define GPIO_NEGATIVE_EDGE_EN 0x44
#define GPIO_POSITIVE_EDGE_STS 0x48
#define GPIO_NEGATIVE_EDGE_STS 0x4C
#define GPIO_MAP_X 0xE0
#define GPIO_MAP_Y 0xE4
#define GPIO_MAP_Z 0xE8
#define GPIO_MAP_W 0xEC
static inline u32 geode_gpio(unsigned int nr)
{
BUG_ON(nr > 28);
return 1 << nr;
}
extern void geode_gpio_set(u32, unsigned int);
extern void geode_gpio_clear(u32, unsigned int);
extern int geode_gpio_isset(u32, unsigned int);
extern void geode_gpio_setup_event(unsigned int, int, int);
extern void geode_gpio_set_irq(unsigned int, unsigned int);
static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
{
geode_gpio_setup_event(gpio, pair, 0);
}
static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
{
geode_gpio_setup_event(gpio, pair, 1);
}
/* Specific geode tests */
static inline int is_geode_gx(void)
{
return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
(boot_cpu_data.x86 == 5) &&
(boot_cpu_data.x86_model == 5));
}
static inline int is_geode_lx(void)
{
return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
(boot_cpu_data.x86 == 5) &&
(boot_cpu_data.x86_model == 10));
}
static inline int is_geode(void)
{
return (is_geode_gx() || is_geode_lx());
}
#ifdef CONFIG_MGEODE_LX
extern int geode_has_vsa2(void);
#else
static inline int geode_has_vsa2(void)
{
return 0;
}
#endif
/* MFGPTs */
#define MFGPT_MAX_TIMERS 8
#define MFGPT_TIMER_ANY (-1)
#define MFGPT_DOMAIN_WORKING 1
#define MFGPT_DOMAIN_STANDBY 2
#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
#define MFGPT_CMP1 0
#define MFGPT_CMP2 1
#define MFGPT_EVENT_IRQ 0
#define MFGPT_EVENT_NMI 1
#define MFGPT_EVENT_RESET 3
#define MFGPT_REG_CMP1 0
#define MFGPT_REG_CMP2 2
#define MFGPT_REG_COUNTER 4
#define MFGPT_REG_SETUP 6
#define MFGPT_SETUP_CNTEN (1 << 15)
#define MFGPT_SETUP_CMP2 (1 << 14)
#define MFGPT_SETUP_CMP1 (1 << 13)
#define MFGPT_SETUP_SETUP (1 << 12)
#define MFGPT_SETUP_STOPEN (1 << 11)
#define MFGPT_SETUP_EXTEN (1 << 10)
#define MFGPT_SETUP_REVEN (1 << 5)
#define MFGPT_SETUP_CLKSEL (1 << 4)
static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
{
u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
outw(value, base + reg + (timer * 8));
}
static inline u16 geode_mfgpt_read(int timer, u16 reg)
{
u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
return inw(base + reg + (timer * 8));
}
extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
extern int geode_mfgpt_alloc_timer(int timer, int domain);
#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
#ifdef CONFIG_GEODE_MFGPT_TIMER
extern int __init mfgpt_timer_setup(void);
#else
static inline int mfgpt_timer_setup(void) { return 0; }
#endif
#endif
|
