diff options
Diffstat (limited to 'recipes-images/images/files/colibri-t30/colibri-t30_bin')
9 files changed, 111 insertions, 0 deletions
diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30.img.cfg b/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30.img.cfg new file mode 100644 index 0000000..d797a13 --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30.img.cfg @@ -0,0 +1,22 @@ +# Copyright (C) 2013-2014 Toradex, Inc. +# +# This software is provided 'as-is', without any express or implied +# warranty. In no event will the authors be held liable for any damages +# arising from the use of this software. +# +# Permission is granted to anyone to use this software for any purpose, +# including commercial applications, and to alter it and redistribute it +# freely, subject to the following restrictions: +# +# 1. The origin of this software must not be misrepresented; you must not +# claim that you wrote the original software. If you use this software +# in a product, an acknowledgment in the product documentation would be +# appreciated but is not required. +# 2. Altered source versions must be plainly marked as such, and must not be +# misrepresented as being the original software. +# 3. This notice may not be removed or altered from any source distribution. + +Version = 0x00020001; +Bctcopy = 1; +Bctfile = colibri_t30_12MHz_NT5CC256M16CP-DI_400MHz.bct; +BootLoader = u-boot-dtb-tegra.bin,0x80108000,0x80108000,Complete; diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30_12MHz_NT5CC256M16CP-DI_400MHz.bct b/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30_12MHz_NT5CC256M16CP-DI_400MHz.bct Binary files differnew file mode 100755 index 0000000..109f0c0 --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30_12MHz_NT5CC256M16CP-DI_400MHz.bct diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30_12MHz_NT5CC256M16CP-DI_533MHz.bct b/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30_12MHz_NT5CC256M16CP-DI_533MHz.bct Binary files differnew file mode 100644 index 0000000..0349242 --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/colibri_t30_12MHz_NT5CC256M16CP-DI_533MHz.bct diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr new file mode 100644 index 0000000..02a920a --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_blk.scr @@ -0,0 +1,42 @@ +test -n ${interface} || setenv interface mmc +test -n ${drive} || setenv drive 1 + +setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200' +setenv set_nextpos 'setexpr filepos ${filepos} + ${filesize}; setexpr blkstart ${blkstart} + ${blkcnt}' + +setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1' +setenv check_2 'setenv conf_blk_offset 0xfff; mmc read ${loadaddr} ${conf_blk_offset} 1' +setenv check_3 'setenv conf_blk_offset 0x7ff; mmc read ${loadaddr} ${conf_blk_offset} 1' +setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mmc dev 0 1; run check_1 || run check_2 || run check_3; crc32 -v ${toradex_oui_addr} 3 94305232' + +setenv migrate_1 'mmc dev 0 0; mmc read ${loadaddr} 6000 1; setenv conf_blk_offset 0x1fff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_2 'mmc dev 0 0; mmc read ${loadaddr} 8000 1; setenv conf_blk_offset 0xfff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_3 'mmc dev 0 0; mmc read ${loadaddr} 9000 1; setenv conf_blk_offset 0x7ff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_4 'mmc dev 0 0; mmc read ${loadaddr} 34000 1; setenv conf_blk_offset 0x1fff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_5 'mmc dev 0 0; mmc read ${loadaddr} 36000 1; setenv conf_blk_offset 0xfff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_6 'mmc dev 0 0; mmc read ${loadaddr} 37000 1; setenv conf_blk_offset 0x7ff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; run migrate_1; run migrate_2; run migrate_3; run migrate_4; run migrate_5; run migrate_6' + +setenv cp_file_chunk 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/root.ext3 ${filesize} ${filepos}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}' + +setenv update_uboot 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/${board_name}.img && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 0x0 ${blkcnt}' + +setenv update_kernel 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}' + +setenv update_fdt 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && fatwrite mmc 0:1 ${loadaddr} ${soc}-colibri-${fdt_board}.dtb ${filesize}' + +setenv update_configblock 'run check_configblock; load ${interface} ${drive}:1 ${loadaddr} ${board_name}/configblock.bin && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' + +setenv update_1 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1' +setenv update_2 'load ${interface} ${drive}:1 ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}' +#do it in chunks of 64M to fit into DDR RAM of the smallest module +setenv update_3 'setenv filesize 4000000; setenv filepos 0; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextpos; done' + +setenv echo_v2.3b1 echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_v2.3b1\" to complete update" +setenv migrate_v2.3b1 'run migrate_configblock; run update_new' +setenv update_v2.3b1 'run update_uboot && run echo_v2.3b1' + +setenv update_new 'run check_configblock || run migrate_configblock; run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3; reset' +setenv update 'if test -v ${ver}; then run update_new; else run update_v2.3b1; fi' + +echo 'enter "run update" to update the entire module' diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr new file mode 100644 index 0000000..cad7b5a --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/flash_eth.scr @@ -0,0 +1,43 @@ +setenv set_blkcnt 'setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200' +#workaround U-Boot counting in hex and split did in decimal +setenv incr_decimal 'setexpr filenum ${filenum} + 1; setexpr filenrlow ${filenum} % 0x10; test ${filenrlow} -eq "a" && setexpr filenum ${filenum} + 0x6; true' +setenv set_nextnum 'run incr_decimal; setexpr blkstart ${blkstart} + ${blkcnt}' + +setenv check_1 'setenv conf_blk_offset 0x1fff; mmc read ${loadaddr} ${conf_blk_offset} 1' +setenv check_2 'setenv conf_blk_offset 0xfff; mmc read ${loadaddr} ${conf_blk_offset} 1' +setenv check_3 'setenv conf_blk_offset 0x7ff; mmc read ${loadaddr} ${conf_blk_offset} 1' +setenv check_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; mmc dev 0 1; run check_1 || run check_2 || run check_3; crc32 -v ${toradex_oui_addr} 3 94305232' + +setenv migrate_1 'mmc dev 0 0; mmc read ${loadaddr} 6000 1; setenv conf_blk_offset 0x1fff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_2 'mmc dev 0 0; mmc read ${loadaddr} 8000 1; setenv conf_blk_offset 0xfff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_3 'mmc dev 0 0; mmc read ${loadaddr} 9000 1; setenv conf_blk_offset 0x7ff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_4 'mmc dev 0 0; mmc read ${loadaddr} 34000 1; setenv conf_blk_offset 0x1fff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_5 'mmc dev 0 0; mmc read ${loadaddr} 36000 1; setenv conf_blk_offset 0xfff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_6 'mmc dev 0 0; mmc read ${loadaddr} 37000 1; setenv conf_blk_offset 0x7ff; crc32 -v ${toradex_oui_addr} 3 94305232 && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' +setenv migrate_configblock 'setexpr toradex_oui_addr ${loadaddr} + 8; run migrate_1; run migrate_2; run migrate_3; run migrate_4; run migrate_5; run migrate_6' + +setenv cp_file_chunk 'tftpboot ${loadaddr} ${board_name}/root.ext3-${filenum}; run set_blkcnt; mmc dev 0 0 && mmc write ${loadaddr} ${blkstart} ${blkcnt}' + +setenv update_uboot 'tftpboot ${loadaddr} ${board_name}/${board_name}.img && run set_blkcnt && mmc dev 0 1 && mmc write ${loadaddr} 0x0 ${blkcnt}' + +setenv update_kernel 'tftpboot ${loadaddr} ${board_name}/uImage && fatwrite mmc 0:1 ${loadaddr} uImage ${filesize}' + +setenv update_fdt 'tftpboot ${loadaddr} ${board_name}/${soc}-colibri-${fdt_board}.dtb && fatwrite mmc 0:1 ${loadaddr} ${soc}-colibri-${fdt_board}.dtb ${filesize}' + +setenv update_configblock 'run check_configblock; tftpboot ${loadaddr} ${board_name}/configblock.bin && mmc dev 0 1 && mmc write ${loadaddr} ${conf_blk_offset} 1' + +setenv update_1 'tftpboot ${loadaddr} ${board_name}/mbr.bin && mmc dev 0 0 && mmc write ${loadaddr} 0x0 0x1' +setenv update_2 'tftpboot ${loadaddr} ${board_name}/boot.vfat && run set_blkcnt && mmc dev 0 0 && mmc write ${loadaddr} 0x2000 ${blkcnt}' +#do it in chunks of 64M to fit into DDR RAM of the smallest module +#split root.ext3 into multiple 64M chunks before copying to TFTP folder as follows +#split -a 2 -b `expr 64 \* 1024 \* 1024` --numeric-suffixes=10 root.ext3 root.ext3- +setenv update_3 'setenv filesize 4000000; setenv filenum 10; setenv blkstart a000; while test ${filesize} -eq "4000000"; do run cp_file_chunk; run set_nextnum; done' + +setenv echo_v2.3b1 echo "successfully updated U-Boot, power-cycle and enter \"run setupdate\; run migrate_v2.3b1\" to complete update" +setenv migrate_v2.3b1 'run migrate_configblock; run update_new' +setenv update_v2.3b1 'run update_uboot && run echo_v2.3b1' + +setenv update_new 'run check_configblock || run migrate_configblock; run update_uboot; run update_1; run update_2; run update_kernel; run update_fdt; run update_3; reset' +setenv update 'if test -v ${ver}; then run update_new; else run update_v2.3b1; fi' + +echo 'enter "run update" to update the entire module' diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_blk.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_blk.scr new file mode 120000 index 0000000..5954646 --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_blk.scr @@ -0,0 +1 @@ +../../library/fwd_blk.scr
\ No newline at end of file diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_eth.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_eth.scr new file mode 120000 index 0000000..decc214 --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_eth.scr @@ -0,0 +1 @@ +../../library/fwd_eth.scr
\ No newline at end of file diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_mmc.scr b/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_mmc.scr new file mode 120000 index 0000000..3848cfa --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/fwd_mmc.scr @@ -0,0 +1 @@ +../../library/fwd_mmc.scr
\ No newline at end of file diff --git a/recipes-images/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh b/recipes-images/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh new file mode 120000 index 0000000..ce71dbd --- /dev/null +++ b/recipes-images/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh @@ -0,0 +1 @@ +../../library/mk-u-boot-scripts.sh
\ No newline at end of file |