2 files changed, 497 insertions, 464 deletions
diff --git a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
index 198c517..9d3adc1 100644
--- a/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Apalis_T30_LinuxReleaseNotesV2.x.txt
@@ -1,221 +1,223 @@
-***********************************************
-Release Notes:  Linux Image V2.x for Apalis T30
-***********************************************
-
-Contents:
-- U-Boot 2011.06 boot loader
-- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
-- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
-
-Licensing:
-- proprietary multimedia codecs included for evaluation purpose only
-- customer required to obtain proper re-distribution license
-
-********************************************************************************
-Linux Image V2.0 Beta 2 (August 19, 2013)
-This updates u-boot and kernel to cope with the increased eMMC and changed T30
-CPU SKU on Apalis T30 - 2GB V1.0C
-- U-Boot:
-  - eMMC and RAM size / offset detection
-  - rename shell prompt  colibri
-- Linux kernel:
-  - workaround limited CPU clock
-  - provision for the Analogue Camera Module
-  - v4l kernel drivers configured as kernel modules
-- rootfs / oe-core:
-  - update to latest git revision for kernel and u-boot
-  - image added relevant v4l kernel modules plus v4l-utils
-
-- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta2_20130819
-
-Known Issues:
-- We are in an early Beta state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution, 
-  comments with timings for other resolutions provided
-- lxappearance is segfaulting upon start
-- connecting an analogue mic to the on module codec resets the codec, so that 
-  neither headphone out nor mic in works anymore. Workaround: Have mic 
-  connected before boot or change the output source between DAC/LineIn
-- certain low-speed USB devices might not get detected
+***********************************************
+Release Notes:  Linux Image V2.x for Apalis T30
+***********************************************
+
+Contents:
+- U-Boot 2011.06 boot loader
+- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
+- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
+
+Licensing:
+- proprietary multimedia codecs included for evaluation purpose only
+- customer required to obtain proper re-distribution license
+
+********************************************************************************
+Linux Image V2.0 Beta 2 (August 19, 2013)
+This updates u-boot and kernel to cope with the increased eMMC and changed T30
+CPU SKU on Apalis T30 - 2GB V1.0c, Apalis T30 - 1GB V1.0a
+- U-Boot:
+  - eMMC and RAM size / offset detection
+  - rename shell prompt to Apalis T30
+- Linux kernel:
+  - workaround limited CPU clock
+  - provision for the Analogue Camera Module
+  - v4l kernel drivers configured as kernel modules
+- rootfs / oe-core:
+  - update to latest git revision for kernel and u-boot
+  - image added relevant v4l kernel modules plus v4l-utils
+
+- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta2_20130816
+
+Known Issues:
+- We are in an early Beta state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution, 
+  comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that 
+  neither headphone out nor mic in works anymore. Workaround: Have mic 
+  connected before boot or change the output source between DAC/LineIn
+- certain low-speed USB devices might not get detected
 - on first boot the resizing process adversely affects system performance for 
-  the first few minutes until completed
-
-********************************************************************************
-Linux Image V2.0 Beta 1 (June 26, 2013)
-- U-Boot:
-  - initial integration
-  - integrate NVIDIA partition table parsing incl. Toradex Apalis configuration block
-  - adjust available amount of memory
-  - activate DVI-D framebuffer console
-  - increase CPU frequency at boot
-  - decrease boot delay
-  - fix overflow in HCD conversion
-- Linux kernel:
-  - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
-  - revise Ethernet MAC address assignment
-  - fix PCIe AXI response decoding errors
-  - fix PCIe reset issue
-  - remove spurious tegra_aes_device
-  - video4linux adv7180 and max9526 integration
-  - fix PCIe by forcing GEN1 speed
-  - set board local critical temperature to 95°C
-  - hack to avoid 24 Hz mode in X resulting in no display at all
-  - silence extensive HDMI HDA audio messages
-- rootfs / oe-core:
-  - update to latest git revision for kernel and u-boot
-  - extend rootfs partition on eMMC to its full partition size on first boot
-  - unified update procedure for all T20/T30
-  - limit journal size
-  - nv-binaries: update to L4T R16.3
-  - added packages: gstreamer deinterlacer, scrot
-  - lxterminal, florence: fix garbled titlebar
-
-- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta1_20130626
-
-Known Issues:
-- We are in an early Beta state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution, 
-  comments with timings for other resolutions provided
-- lxappearance is segfaulting upon start
-- connecting an analogue mic to the on module codec resets the codec, so that 
-  neither headphone out nor mic in works anymore. Workaround: Have mic 
-  connected before boot or change the output source between DAC/LineIn
-- certain low-speed USB devices might not get detected
+  the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Beta 1 (June 26, 2013)
+- U-Boot:
+  - initial integration
+  - integrate NVIDIA partition table parsing incl. Toradex Apalis configuration block
+  - adjust available amount of memory
+  - activate DVI-D framebuffer console
+  - increase CPU frequency at boot
+  - decrease boot delay
+  - fix overflow in HCD conversion
+- Linux kernel:
+  - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
+  - revise Ethernet MAC address assignment
+  - fix PCIe AXI response decoding errors
+  - fix PCIe reset issue
+  - remove spurious tegra_aes_device
+  - video4linux adv7180 and max9526 integration
+  - fix PCIe by forcing GEN1 speed
+  - set board local critical temperature to 95°C
+  - hack to avoid 24 Hz mode in X resulting in no display at all
+  - silence extensive HDMI HDA audio messages
+- rootfs / oe-core:
+  - update to latest git revision for kernel and u-boot
+  - extend rootfs partition on eMMC to its full partition size on first boot
+  - unified update procedure for all T20/T30
+  - limit journal size
+  - nv-binaries: update to L4T R16.3
+  - added packages: gstreamer deinterlacer, scrot
+  - lxterminal, florence: fix garbled titlebar
+
+- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Beta1_20130626
+
+Known Issues:
+- We are in an early Beta state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution, 
+  comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that 
+  neither headphone out nor mic in works anymore. Workaround: Have mic 
+  connected before boot or change the output source between DAC/LineIn
+- certain low-speed USB devices might not get detected
 - on first boot the resizing process adversely affects system performance for 
-  the first few minutes until completed
-
-********************************************************************************
-Linux Image V2.0 Alpha 1 (March 15, 2013)
-(ported form the Linux Image V2.0 Beta1 for Colibri T30)
-- U-Boot:
-  - first release
-- Linux kernel:
-  - first release
-- oe-core:
-  - first release
-- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Alpha1_20130315
-
-Known Issues:
-- We are in an early Alpha state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution, 
-  comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-- Gigabit Ethernet MAC address hard-coded to 00:0e:c6:87:72:01
-- stability issues on concurrent PCIe and SATA stress testing
-- connecting an analog mic to the on module codec resets the codec, so that 
-  neither headphone out nor mic in works anymore. Workaround: Have mic 
-  connected before boot or change the output source between DAC/LineIn
-
-********************************************************************************
-Notes:
-- 115200 baud serial debug console on UARTA aka UART1 (EvalBoard lower X28 resp. X29 depending on JP10/12) without any handshake
-- user account: root with empty password
-- ext3 root file system
-- opkg package manager
-- HDMI: not all pixel clock frequencies allow for HDMI audio
-- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
-- Linux host used for recovery mode flashing requires proper 32-bit execution environment (e.g. install ia32-libs on 64-bit Ubuntu)
-
-Working on latest image:
-- U-Boot boot loader
-  - environment storage in eMMC
-  - ASIX based USB to Ethernet adapters
+  the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Alpha 1 (March 15, 2013)
+(ported form the Linux Image V2.0 Beta1 for Colibri T30)
+- U-Boot:
+  - first release
+- Linux kernel:
+  - first release
+- oe-core:
+  - first release
+- sources git.toradex.com tag Apalis_T30_LinuxImageV2.0Alpha1_20130315
+
+Known Issues:
+- We are in an early Alpha state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to full HD resolution, 
+  comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+- Gigabit Ethernet MAC address hard-coded to 00:0e:c6:87:72:01
+- stability issues on concurrent PCIe and SATA stress testing
+- connecting an analog mic to the on module codec resets the codec, so that 
+  neither headphone out nor mic in works anymore. Workaround: Have mic 
+  connected before boot or change the output source between DAC/LineIn
+
+********************************************************************************
+Notes:
+- 115200 baud serial debug console on UARTA aka UART1 (EvalBoard lower X28 resp. X29 depending on JP10/12) without any handshake
+- user account: root with empty password
+- ext3 root file system
+- opkg package manager
+- HDMI: not all pixel clock frequencies allow for HDMI audio
+- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
+- Linux host used for recovery mode flashing requires proper 32-bit execution environment and awk (e.g. install ia32-libs on 64-bit Ubuntu)
+
+Working on latest image:
+- U-Boot boot loader
+  - environment storage in eMMC
+  - ASIX based USB to Ethernet adapters
   - MMC/SD cards (only GPT partitioned)
-  - eMMC flash with NVIDIA partition table parsing
-  - serial console debug UARTA aka UART1
-  - Toradex Apalis configuration block handling
-  - USB storage as host
-- Linux kernel
-  - GPIOlib /sys/class/gpio (LVDS transmitter configuration)
-  - temperature sensor /sys/bus/i2c/devices/4-004c
-  - RTC (Tegra internal, PMIC and board level I2C RTC)
-  - Gigabit Ethernet eth0
-  - serial console debug UARTA aka UART1
-  - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2
-  - I2C via /dev/i2c-X
-  - 8-bit MMC card mmc1
-  - 4-bit SD card mmc2
-  - PWM LEDs /sys/class/leds/
-  - HDMI HDA audio
-  - analog audio capture, playback and touch
-    - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
-    - touch has some jitter
-  - SPI via /dev/spidev0.0 aka SPI1 and /dev/spidev4.2 aka SPI2
-  - framebuffer console
-  - custom Ethernet MAC Address
-  - serial number and board revision
-  - USB host port
-  - USB audio driver
-  - USB webcam
-  - USB raw HID device /dev/hidrawX
-  - USB device Ethernet RNDIS, provided by Android gadget
-  - automatic USB device/host/suspend detection aka full OTG support
-  - suspend LP1
-  - CAN via can0 and can1
-  - PCIe (regular ports and mini-PCIe slot)
-  - SATA (regular port or mSATA slot
-  - DVFS power management
-  - parallel camera interface
-- Linux user-space
-  - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
-  - tegrastats
-  - Firefox
-  - Gstreamer video encode and playback, dual full HD video decode
-  - LXDE
-  - tegrastats-gtk, CPU information visible in graphical environment
-  - LVDS transmitter configuration (see lvds-dual-channel.sh resp. lvds-single-channel.sh)
-
-Not working or not tested:
-- U-Boot boot loader
-  - U-Boot USB keyboard
-  - Gigabit Ethernet
-- Linux kernel
-  - analog input AD0 .. AD3 not implemented
-  - watchdog
-  - HDA audio
-  - IrDA
-  - RS-422/485
-  - SIM card
-- Linux user-space
-  - Adobe Flash not provided by L4T (and probably never will)
-  - opkg package feeds don't seem to be usable
-  - GPIO config tool missing Apalis MXM3 pin description integration
-
-**********************************************
-eMMC Boot: Apalis T30 V1.0a and V1.0b (Sample)
-**********************************************
-
-Initial Preparation:
-- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
-
-Flash eMMC:
-- EvalBoard V1.0a
-  - connect USB micro A/B (X49) or USB B (X50) to development workstation using micro or regular USB cable
-  - connect serial debug console to lower X28 or X29 using null modem RS-232 or regular USB cable
-  - enter recovery mode:
-    - Eboot (e.g. transitioning from WEC):
-      - 115200 baud without any handshake
-      - hold space key while applying power or resetting
-      - press x to enter command mode
-      - use 'reboot rcm' command
-    - U-Boot (e.g. updating Embedded Linux):
-      - 115200 baud without any handshake
-      - apply power or reset
-      - hit any key to stop auto booting
-      - use 'enterrcm' command
-  - for more information about recovery mode please consult Apalis T30 datasheet chapter 6
-- run update.sh script
-
-Boot from eMMC:
-- EvalBoard V1.0a
-- power cycle
-- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
-
-Toradex, August 19, 2013
+  - eMMC flash with NVIDIA partition table parsing
+  - serial console debug UARTA aka UART1
+  - Toradex Apalis configuration block handling
+  - USB storage as host
+- Linux kernel
+  - GPIOlib /sys/class/gpio (LVDS transmitter configuration)
+  - temperature sensor /sys/bus/i2c/devices/4-004c
+  - RTC (Tegra internal, PMIC and board level I2C RTC)
+  - Gigabit Ethernet eth0
+  - serial console debug UARTA aka UART1
+  - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2
+  - I2C via /dev/i2c-X
+  - 8-bit MMC card mmc1
+  - 4-bit SD card mmc2
+  - PWM LEDs /sys/class/leds/
+  - HDMI 
+ audio
+  - HDA audio (on Eval Board V1.0a: check datasheet/schematics for patch instructions)
+  - analog audio capture, playback and touch
+    - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
+    - touch has some jitter
+  - SPI via /dev/spidev0.0 aka SPI1 and /dev/spidev4.2 aka SPI2
+  - framebuffer console
+  - custom Ethernet MAC Address
+  - serial number and board revision
+  - USB host port
+  - USB audio driver
+  - USB webcam
+  - USB raw HID device /dev/hidrawX
+  - USB device Ethernet RNDIS, provided by Android gadget
+  - automatic USB device/host/suspend detection aka full OTG support
+  - suspend LP1
+  - CAN via can0 and can1
+  - PCIe (regular ports and mini-PCIe slot)
+  - SATA (regular port or mSATA slot
+  - DVFS power management
+  - parallel camera interface
+- Linux user-space
+  - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
+  - tegrastats
+  - Firefox
+  - Gstreamer video encode and playback, dual full HD video decode
+  - LXDE
+  - tegrastats-gtk, CPU information visible in graphical environment
+  - LVDS transmitter configuration (see lvds-dual-channel.sh resp. lvds-single-channel.sh)
+
+Not working or not tested:
+- U-Boot boot loader
+  - U-Boot USB keyboard
+  - Gigabit Ethernet
+- Linux kernel
+  - analog input AD0 .. AD3 not implemented
+  - watchdog
+  - IrDA
+  - RS-422/485
+  - SIM card
+- Linux user-space
+  - Adobe Flash not provided by L4T (and probably never will)
+  - opkg package feeds don't seem to be usable
+  - GPIO config tool missing Apalis MXM3 pin description integration
+
+*********************************************************
+eMMC Boot: Apalis T30 2GB V1.0a, V1.0b and V1.0c (Sample)
+eMMC Boot: Apalis T30 1GB V1.0a (Sample)
+*********************************************************
+
+Initial Preparation:
+- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
+
+Flash eMMC:
+- EvalBoard V1.0a
+  - connect USB micro A/B (X49) or USB B (X50) to development workstation using micro or regular USB cable
+  - connect serial debug console to lower X28 or X29 using null modem RS-232 or regular USB cable
+  - enter recovery mode:
+    - Eboot (e.g. transitioning from WEC):
+      - 115200 baud without any handshake
+      - hold space key while applying power or resetting
+      - press x to enter command mode
+      - use 'reboot rcm' command
+    - U-Boot (e.g. updating Embedded Linux):
+      - 115200 baud without any handshake
+      - apply power or reset
+      - hit any key to stop auto booting
+      - use 'enterrcm' command
+  - for more information about recovery mode please consult Apalis T30 datasheet chapter 6
+- run update.sh script
+
+Boot from eMMC:
+- EvalBoard V1.0a
+- power cycle
+- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
+
+Toradex, August 19, 2013
diff --git a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
index d1a431c..962d59e 100644
--- a/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
+++ b/release-notes/Colibri_T30_LinuxReleaseNotesV2.x.txt
@@ -1,250 +1,281 @@
-************************************************
-Release Notes:  Linux Image V2.x for Colibri T30
-************************************************
-
-Contents:
-- U-Boot 2011.06 boot loader
-- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
-- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
-
-Licensing:
-- proprietary multimedia codecs included for evaluation purpose only
-- customer required to obtain proper re-distribution license
-
-********************************************************************************
-Linux Image V2.0 Beta 2 (June 26, 2013)
-- U-Boot:
-  - integrate NVIDIA partition table parsing incl. Toradex Colibri configuration block
-  - increase CPU frequency at boot
-  - decrease boot delay
-  - fix overflow in HCD conversion
-- Linux kernel:
-  - allow easy integration of a custom Linux boot logo
-  - add TouchRev Fusion 10 aka CPT CLAA101NC05 display timings
-  - integrate TouchRev Fusion 7 and 10 multi-touch driver
-  - fix gpio-key pull-ups
-  - enable back key wake-up
-  - rename UARTs and PWM LEDs
-  - explicitly configure for 4-bit MMC/SD cards by default
-  - integrate MCP251x and SJA1000 CAN support
-  - fix Ethernet MAC address assignment after suspend
-  - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
-  - export some GPIOs via /sys/class/gpio
-  - add comment about GMI_ADV_N usage
-  - remove spurious tegra_aes_device
-  - video4linux adv7180 and max9526 integration
-  - set board local critical temperature to 95°C
-  - hack to avoid 24 Hz mode in X resulting in no display at all
-- rootfs / oe-core:
-  - update to latest git revision for kernel and u-boot
-  - extend rootfs partition on eMMC to its full partition size on first boot
-  - unified update procedure for all T20/T30
-  - limit journal size
-  - nv-binaries: update to L4T R16.3
-  - added packages: gstreamer deinterlacer, scrot
-  - lxterminal, florence: fix garbled titlebar
-
-- sources git.toradex.com tag T30_LinuxImageV2.0Beta2_20130626
-
-Known Issues:
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
-  comments with timings for other resolutions provided
-- lxappearance is segfaulting upon start
-- connecting an analogue mic to the on module codec resets the codec, so that 
-  neither headphone out nor mic in works anymore. Workaround: Have mic 
-  connected before boot or change the output source between DAC/LineIn
+************************************************
+Release Notes:  Linux Image V2.x for Colibri T30
+************************************************
+
+Contents:
+- U-Boot 2011.06 boot loader
+- Linux 3.1.10 kernel, based on NVIDIA's Linux for Tegra (L4T) release 16-r3
+- OpenEmbedded oe-core 2012.10 based root file system, using LXDE desktop environment
+
+Licensing:
+- proprietary multimedia codecs included for evaluation purpose only
+- customer required to obtain proper re-distribution license
+
+********************************************************************************
+Linux Image V2.0 Beta 3 (August 20, 2013)
+This updates u-boot and kernel to cope with the increased eMMC and changed T30
+CPU SKU on Colibri T30
+- U-Boot:
+  - eMMC and RAM size / offset detection
+  - rename shell prompt to Colibri T30
+- Linux kernel:
+  - workaround limited CPU clock
+  - provision for the Analogue Camera Module
+  - v4l kernel drivers configured as kernel modules
+- rootfs / oe-core:
+  - update to latest git revision for kernel and u-boot
+  - image added v4l-utils
+  - removed warning output from commandline tegrastats
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Beta3_20130820
+
+Known Issues:
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
+  comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that 
+  neither headphone out nor mic in works anymore. Workaround: Have mic 
+  connected before boot or change the output source between DAC/LineIn
 - certain low-speed USB devices might not get detected
 - on first boot the resizing process adversely affects system performance for 
-  the first few minutes until completed
-
-********************************************************************************
-Linux Image V2.0 Beta 1 (March 28, 2013)
-- U-Boot:
-  - no changes
-- Linux kernel:
-  - fbcon: logo: allow easy integration of a custom Linux boot logo
-- rootfs / oe-core:
-  - use newer Linux kernel
-  - use latest GPIOConfig, fixed SODIMM numbers
-  - use a unified recipe for the Linux kernel
-  - UBOOT_MACHINE variable definition moved to machine .conf file
-  - add setxkbmap package
-  - add florence package, virtual keyboard application
-  - burnflash: fix race condition in genext3fs.sh and use -F option for mount
-  - xorg framebuffer depth 16bit
-  - use new Toradex CI
-
-- sources git.toradex.com tag T30_LinuxImageV2.0Beta1_20130314
-
-Known Issues:
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
-  comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-- connecting an analog mic to the on module codec resets the codec, so that 
-  neither headphone out nor mic in works anymore. Workaround: Have mic 
-  connected before boot or change the output source between DAC/LineIn
-
-
-********************************************************************************
-Linux Image V2.0 Alpha 1 (January 22, 2013)
-- U-Boot:
-  - moved to proper machine type
-- Linux kernel:
-  - added one wire platform data (conditional, CONFIG_W1_MASTER_TEGRA must be enabled)
-  - fix USB hang on device insertion
-  - added correct spidev platform data (/dev/spidev0.0)
-  - PWM B, PWM C, PWM D now accessible from userspace, /sys/class/leds/
-  - refined pin muxing
-  - added thermal throttling, i.e. CPU freq. is reduced when CPU gets hot
-  - updated audio codec driver, audio input now working
-  - GPIO keys implementation
-  - LP1 suspend support
-  - moved to proper machine type
-  - fix PMIC regulator platform data
-- oe-core:
-  - use latest u-boot and Linux kernel
-  - use latest GPIOConfig, fixes issues with tristated pins and GPIO with num >222
-  
-- sources git.toradex.com tag T30_LinuxImageV2.0Alpha1_20130122
-
-Known Issues:
-- We are in an early Alpha state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
-  comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-- issues with the genext3.sh scripts: if your language settings expect 
-  something different to 'y' to a question, the script failes.
-  The rootfs is empty resulting in a kernel panic during boot.
-  Workaround: edit line 38 of bin/genext3.sh as follows:
-  old: echo y | mkfs.ext3 $@ -L arm 
-  new: mkfs.ext3 -F -L arm $@
-
-********************************************************************************
-Linux Image V2.0 Alpha 0 (December 27, 2012)
-(ported form the Linux Image V2.0 Beta1 for Colibri T20)
-- U-Boot:
-  - first release
-- Linux kernel:
-  - first release
-- oe-core:
-  - first release
-- sources git.toradex.com tag T30_LinuxImageV2.0Alpha0_20121227
-
-Known Issues:
-- We are in an early Alpha state, not all functions are tested.
-- If a a monitor is connected to DVI, the kernel sometime hangs when the 
-  display controller DC1 is initialised. -> reboot required. 
-- When no device was attached to the USB host port during boot, the 
-  system crashes when one is attached when the system is up.
-- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
-  comments with timings for other resolutions provided
-- some windows have garbled titlebar, e.g. lxterminal
-- lxappearance is segfaulting upon start
-
-********************************************************************************
-Notes:
-- 115200 baud serial debug console on UARTA aka FFUART (lower X25 on EvalBoards, X13 on Iris) without any handshake
-- user account: root with empty password
-- ext3 root file system
-- opkg package manager
-- HDMI: not all pixel clock frequencies allow for HDMI audio
-- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
-- Linux host used for recovery mode flashing requires proper 32-bit execution environment (e.g. install ia32-libs on 64-bit Ubuntu)
-
-Working on latest image:
-- U-Boot boot loader
-  - environment storage in eMMC
-  - Ethernet
+  the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Beta 2 (June 26, 2013)
+- U-Boot:
+  - integrate NVIDIA partition table parsing incl. Toradex Colibri configuration block
+  - increase CPU frequency at boot
+  - decrease boot delay
+  - fix overflow in HCD conversion
+- Linux kernel:
+  - allow easy integration of a custom Linux boot logo
+  - add TouchRev Fusion 10 aka CPT CLAA101NC05 display timings
+  - integrate TouchRev Fusion 7 and 10 multi-touch driver
+  - fix gpio-key pull-ups
+  - enable back key wake-up
+  - rename UARTs and PWM LEDs
+  - explicitly configure for 4-bit MMC/SD cards by default
+  - integrate MCP251x and SJA1000 CAN support
+  - fix Ethernet MAC address assignment after suspend
+  - hack to make newer SD cards work by adding a quirk for lack of 1.8v support
+  - export some GPIOs via /sys/class/gpio
+  - add comment about GMI_ADV_N usage
+  - remove spurious tegra_aes_device
+  - video4linux adv7180 and max9526 integration
+  - set board local critical temperature to 95°C
+  - hack to avoid 24 Hz mode in X resulting in no display at all
+- rootfs / oe-core:
+  - update to latest git revision for kernel and u-boot
+  - extend rootfs partition on eMMC to its full partition size on first boot
+  - unified update procedure for all T20/T30
+  - limit journal size
+  - nv-binaries: update to L4T R16.3
+  - added packages: gstreamer deinterlacer, scrot
+  - lxterminal, florence: fix garbled titlebar
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Beta2_20130626
+
+Known Issues:
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
+  comments with timings for other resolutions provided
+- lxappearance is segfaulting upon start
+- connecting an analogue mic to the on module codec resets the codec, so that 
+  neither headphone out nor mic in works anymore. Workaround: Have mic 
+  connected before boot or change the output source between DAC/LineIn
+- certain low-speed USB devices might not get detected
+- on first boot the resizing process adversely affects system performance for 
+  the first few minutes until completed
+
+********************************************************************************
+Linux Image V2.0 Beta 1 (March 28, 2013)
+- U-Boot:
+  - no changes
+- Linux kernel:
+  - fbcon: logo: allow easy integration of a custom Linux boot logo
+- rootfs / oe-core:
+  - use newer Linux kernel
+  - use latest GPIOConfig, fixed SODIMM numbers
+  - use a unified recipe for the Linux kernel
+  - UBOOT_MACHINE variable definition moved to machine .conf file
+  - add setxkbmap package
+  - add florence package, virtual keyboard application
+  - burnflash: fix race condition in genext3fs.sh and use -F option for mount
+  - xorg framebuffer depth 16bit
+  - use new Toradex CI
+
+- sources git.toradex.com tag T30_LinuxImageV2.0Beta1_20130314
+
+Known Issues:
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
+  comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+- connecting an analog mic to the on module codec resets the codec, so that 
+  neither headphone out nor mic in works anymore. Workaround: Have mic 
+  connected before boot or change the output source between DAC/LineIn
+
+
+********************************************************************************
+Linux Image V2.0 Alpha 1 (January 22, 2013)
+- U-Boot:
+  - moved to proper machine type
+- Linux kernel:
+  - added one wire platform data (conditional, CONFIG_W1_MASTER_TEGRA must be enabled)
+  - fix USB hang on device insertion
+  - added correct spidev platform data (/dev/spidev0.0)
+  - PWM B, PWM C, PWM D now accessible from userspace, /sys/class/leds/
+  - refined pin muxing
+  - added thermal throttling, i.e. CPU freq. is reduced when CPU gets hot
+  - updated audio codec driver, audio input now working
+  - GPIO keys implementation
+  - LP1 suspend support
+  - moved to proper machine type
+  - fix PMIC regulator platform data
+- oe-core:
+  - use latest u-boot and Linux kernel
+  - use latest GPIOConfig, fixes issues with tristated pins and GPIO with num >222
+  
+- sources git.toradex.com tag T30_LinuxImageV2.0Alpha1_20130122
+
+Known Issues:
+- We are in an early Alpha state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
+  comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+- issues with the genext3.sh scripts: if your language settings expect 
+  something different to 'y' to a question, the script failes.
+  The rootfs is empty resulting in a kernel panic during boot.
+  Workaround: edit line 38 of bin/genext3.sh as follows:
+  old: echo y | mkfs.ext3 $@ -L arm 
+  new: mkfs.ext3 -F -L arm $@
+
+********************************************************************************
+Linux Image V2.0 Alpha 0 (December 27, 2012)
+(ported form the Linux Image V2.0 Beta1 for Colibri T20)
+- U-Boot:
+  - first release
+- Linux kernel:
+  - first release
+- oe-core:
+  - first release
+- sources git.toradex.com tag T30_LinuxImageV2.0Alpha0_20121227
+
+Known Issues:
+- We are in an early Alpha state, not all functions are tested.
+- If a a monitor is connected to DVI, the kernel sometime hangs when the 
+  display controller DC1 is initialised. -> reboot required. 
+- When no device was attached to the USB host port during boot, the 
+  system crashes when one is attached when the system is up.
+- LVDS aka TFTLCD resolution hard-coded in kernel to VESA VGA resolution, 
+  comments with timings for other resolutions provided
+- some windows have garbled titlebar, e.g. lxterminal
+- lxappearance is segfaulting upon start
+
+********************************************************************************
+Notes:
+- 115200 baud serial debug console on UARTA aka FFUART (lower X25 on EvalBoards, X13 on Iris) without any handshake
+- user account: root with empty password
+- ext3 root file system
+- opkg package manager
+- HDMI: not all pixel clock frequencies allow for HDMI audio
+- CRT: the T30 internal video DAC output is unsupported by NVIDIA's L4T Linux SW stack
+- Linux host used for recovery mode flashing requires proper 32-bit execution environment and awk (e.g. install ia32-libs on 64-bit Ubuntu)
+
+Working on latest image:
+- U-Boot boot loader
+  - environment storage in eMMC
+  - Ethernet
   - MMC/SD cards (only GPT partitioned)
-  - eMMC flash with NVIDIA partition table parsing
-  - serial console debug UARTA
-  - Toradex Colibri configuration block handling
-  - USB storage as host
-- Linux kernel
-  - GPIOlib /sys/class/gpio
-  - temperature sensor /sys/bus/i2c/devices/4-004c
-  - RTC (Tegra internal, PMIC and board level I2C RTC)
-  - Ethernet eth0
-  - serial console debug UARTA
-  - high speed serial UARTB and UARTD
-  - I2C via /dev/i2c-X
-  - MMC/SD card, optional 8-bit SDHCI
-  - PWM LEDs /sys/class/leds/
-  - HDMI SPDIF audio
-  - analog audio capture, playback and touch
-    - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
-    - touch has some jitter
-  - SPI via /dev/spidev0.0
-  - GMI with multiplexed nPWE and RDnWR
-  - framebuffer console
-  - custom Ethernet MAC Address
-  - serial number and board revision
-  - USB host port
-  - USB audio driver
-  - USB webcam
-  - USB raw HID device /dev/hidrawX
-  - USB device Ethernet RNDIS, provided by Android gadget
-  - automatic USB device/host detection aka OTG support
-  - suspend LP1
-  - DVFS power management
-  - optional parallel camera interface
-- Linux user-space
-  - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
-  - tegrastats
-  - Firefox
-  - Gstreamer video encode and playback, dual full HD video decode
-  - GPIO config tool
-  - LXDE
-  - tegrastats-gtk, CPU information visible in graphical environment
-
-Not working or not tested:
-- U-Boot boot loader
-  - U-Boot USB keyboard
+  - eMMC flash with NVIDIA partition table parsing
+  - serial console debug UARTA
+  - Toradex Colibri configuration block handling
+  - USB storage as host
+- Linux kernel
+  - GPIOlib /sys/class/gpio
+  - temperature sensor /sys/bus/i2c/devices/4-004c
+  - RTC (Tegra internal, PMIC and board level I2C RTC)
+  - Ethernet eth0
+  - serial console debug UARTA
+  - high speed serial UARTB and UARTD
+  - I2C via /dev/i2c-X
+  - MMC/SD card, optional 8-bit SDHCI
+  - PWM LEDs /sys/class/leds/
+  - HDMI SPDIF audio
+  - analog audio capture, playback and touch
+    - audio noise is high, workaround is to set headphone volume to maximum and use the DAC volume
+    - touch has some jitter
+  - SPI via /dev/spidev0.0
+  - GMI with multiplexed nPWE and RDnWR
+  - framebuffer console
+  - custom Ethernet MAC Address
+  - serial number and board revision
+  - USB host port
+  - USB audio driver
+  - USB webcam
+  - USB raw HID device /dev/hidrawX
+  - USB device Ethernet RNDIS, provided by Android gadget
+  - automatic USB device/host detection aka OTG support
+  - suspend LP1
+  - DVFS power management
+  - optional parallel camera interface
+- Linux user-space
+  - graphics (LVDS-1 aka TFTLCD and HDMI-1 aka DVI-D)
+  - tegrastats
+  - Firefox
+  - Gstreamer video encode and playback, dual full HD video decode
+  - GPIO config tool
+  - LXDE
+  - tegrastats-gtk, CPU information visible in graphical environment
+
+Not working or not tested:
+- U-Boot boot loader
+  - U-Boot USB keyboard
   - TFTLCD framebuffer support
-- Linux kernel
-  - analog input AD0 .. AD3 not implemented
-  - watchdog
-  - IrDA
-  - RS-422/485
-- Linux user-space
-  - Adobe Flash not provided by L4T (and probably never will)
-  - opkg package feeds don't seem to be usable
-
-***********************************************
-eMMC Boot: Colibri T30 V1.1b and V1.1c (Sample)
-***********************************************
-
-Initial Preparation:
-- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
-
-Flash eMMC:
-- EvalBoard V3.1a
-  - connect USB B (X29) or USB micro A/B (X30) to development workstation using regular or micro USB cable
-  - the jumper JP2 must be open
-  - press and hold recovery mode switch (SW9) during power up
-- Iris V1.1a
-  - connect USB micro A/B (X12) to development workstation using regular micro USB cable
-  - short pin 1-2 of JP1 on Iris for RECOVERY
-(other carrier boards see http://developer.toradex.com/knowledge-base/colibri-recovery-mode)
-- make sure that the carrier board supports USB high speed
-  - Iris & EvalBoard V3.1a OK, for other carrier boards see http://developer.toradex.com/knowledge-base/usb-2.0-high-speed-%28480mbps%29 )
-- apply power or reset
-- run update.sh script
-
-Boot from eMMC:
-- EvalBoard V3.1a
-  - do no longer press SW9
-- Iris V1.1a
-  - do no longer short any pins of JP1
-- power cycle
-- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
-
-Toradex, June 27, 2013
+- Linux kernel
+  - analog input AD0 .. AD3 not implemented
+  - watchdog
+  - IrDA
+  - RS-422/485
+- Linux user-space
+  - Adobe Flash not provided by L4T (and probably never will)
+  - opkg package feeds don't seem to be usable
+
+*********************************************************
+eMMC Boot: Colibri T30 V1.1b, V1.1c and V1.1d (Sample)
+*********************************************************
+
+Initial Preparation:
+- download and extract T30_LinuxImageVx.yz.tar.bz2 package with root permissions
+
+Flash eMMC:
+- EvalBoard V3.1a
+  - connect USB B (X29) or USB micro A/B (X30) to development workstation using regular or micro USB cable
+  - the jumper JP2 must be open
+  - press and hold recovery mode switch (SW9) during power up
+- Iris V1.1a
+  - connect USB micro A/B (X12) to development workstation using regular micro USB cable
+  - short pin 1-2 of JP1 on Iris for RECOVERY
+(other carrier boards see http://developer.toradex.com/knowledge-base/colibri-recovery-mode)
+- make sure that the carrier board supports USB high speed
+  - Iris & EvalBoard V3.1a OK, for other carrier boards see http://developer.toradex.com/knowledge-base/usb-2.0-high-speed-%28480mbps%29 )
+- apply power or reset
+- run update.sh script
+
+Boot from eMMC:
+- EvalBoard V3.1a
+  - do no longer press SW9
+- Iris V1.1a
+  - do no longer short any pins of JP1
+- power cycle
+- upon first boot post-install scripts are run which takes around 2 minutes, please be patient
+
+Toradex, August 20, 2013