diff options
Diffstat (limited to 'release-notes')
| -rw-r--r-- | release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt | 52 |
1 files changed, 47 insertions, 5 deletions
diff --git a/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt b/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt index 45ff75a..6e2646b 100644 --- a/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt +++ b/release-notes/Apalis_TK1_LinuxReleaseNotesV2.x.txt @@ -16,6 +16,47 @@ Licensing: - customer required to obtain proper re-distribution license ******************************************************************************** +Linux Image V2.6.1 Beta 2 (November 22, 2016) + +- U-Boot boot loader: + - remove GPIOs used as special function pins + - fix device tree pre-fix in DFU_ALT_EMMC_INFO + - clean-up AS3722 PMIC configuration + - pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2# + - configure DP_HPD_PFF0 pin as optional DisplayPort hot-plug detect + - adjust pin muxing for V1.1 HW + - sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2 +- Linux kernel: + - enable UART4 + - fix CL-DVFS and soctherm to unlock full performance + - remove GPIO functionality from DP_HPD and GPIO_PFF2 pins + - optional eDP support requiring DP_HPD_PFF0 pin as optional hot-plug detect + - integrate ADV7280-M, AP1302, OV5640 and TC358743 camera support + - revert introduction of 2 kthreads for camera capture + - configure IPv6 SIT driver as module + - fix PCIe clock and reset not conforming to specification + - fix some mistakes in Tegra124 concerning pin muxing + - add 200 MHz tap hole coefficients for UHS-I tuning on SDMMC1 + - pull-up GPIO_PI6 connected to TMP451's ALERT#/THERM2# + - adjust pin muxing for V1.1 HW + - sd card detect SD1_CD# applicable for V1.1 modules using GPIO_PV2 + - no longer do card detect polling on V1.1 HW +- Linux user-space: + - add initial asound.state +- OpenEmbedded build system: + - fix buildtime warnings in linux-driver-package + - Qt4 patch which fixes 24-bit colour depth + - QtQuickControls only built if QtBase configured with accessibility + - update toradex-mirrors to V2.6 + +- sources git.toradex.com tag Apalis_TK1_LinuxImageV2.6.1Beta2_20161122 + - repository linux-toradex branch toradex_tk1_l4t_r21.5 + - repository u-boot-toradex branch 2015.04-toradex + +Known Issues: +- License texts do not get deployed to the root file system. + +******************************************************************************** Linux Image V2.6.1 Beta 1 (September 29, 2016) - U-Boot boot loader: @@ -109,8 +150,10 @@ Working on latest image: - Gigabit Ethernet enpXs0, X being its PCIe bus number - eMMC ext3 - serial console debug UARTA aka UART1 ttyS0 + - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2 ttyHSX + - I2C via /dev/i2c-X - 4-bit MMC card mmc1 (full UHS-I support) - - 4-bit SD card mmc2 (full UHS-I support, polled card detect) + - 4-bit SD card mmc2 (full UHS-I support) - PWM /sys/class/pwm/pwmchip0 - HDMI HDA audio hw:1,3 - analogue audio capture and playback hw:0,0 @@ -127,6 +170,8 @@ Working on latest image: - SATA (regular port or mSATA slot) - DVFS power management including low-power core migration - single channel LVDS + - optional eDP + - optional CSI2 camera interface - Linux user-space - graphics (HDMI-0 aka DVI-D and LVDS-0) - tegrastats @@ -139,8 +184,6 @@ Not working or not tested: - U-Boot USB keyboard - Linux kernel - RTC (board level I2C RTC) - - high speed serial UARTB aka UART3, UARTC aka UART4 and UARTD aka UART2 ttyHSX - - I2C via /dev/i2c-X - HDA audio (on Eval Board V1.0a: check datasheet/schematics for patch instructions) - resistive touch @@ -148,7 +191,6 @@ Not working or not tested: - watchdog - analogue inputs - CAN via can0 and can1 - - optional CSI2 camera interface - IrDA - RS-485 - SIM card @@ -161,4 +203,4 @@ Not working or not tested: Flashing instruction have been moved to the Toradex developer article: http://developer.toradex.com/knowledge-base/flashing-linux-on-tegra-modules -Toradex, October 5, 2016 +Toradex, November 26, 2016 |