diff options
Diffstat (limited to 'recipes')
7 files changed, 0 insertions, 456 deletions
diff --git a/recipes/xorg-xserver/files/crash-hack.patch b/recipes/xorg-xserver/files/crash-hack.patch deleted file mode 100644 index 0053a10..0000000 --- a/recipes/xorg-xserver/files/crash-hack.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- xorg-server-1.11.2/miext/damage/damage.c~ 2011-04-24 06:54:03.000000000 +0200 -+++ xorg-server-1.11.2/miext/damage/damage.c 2012-07-27 12:12:00.012473812 +0200 -@@ -596,6 +596,8 @@ - ScreenPtr pScreen = pDst->pDrawable->pScreen; - PictureScreenPtr ps = GetPictureScreen(pScreen); - damageScrPriv(pScreen); -+ //ugly hack, the xserver crashes when gtk programs use some fancy font rendering, this prevents this -+ maskFormat = 0; - - if (checkPictureDamage (pDst)) - { diff --git a/recipes/xorg-xserver/xserver-xf86-config/apalis-t30/xorg.conf b/recipes/xorg-xserver/xserver-xf86-config/apalis-t30/xorg.conf deleted file mode 100644 index 9aa54a4..0000000 --- a/recipes/xorg-xserver/xserver-xf86-config/apalis-t30/xorg.conf +++ /dev/null @@ -1,135 +0,0 @@ -# This is an optimised configuration for Xorg on the Toradex Tegra based Apalis -# and Colibri modules -# -# In order to disable unused monitor outputs, apply the Option "Ignore" "true" -# (in the monitor section). By defining a particular resolution one can choose -# a preferred mode for all monitors. However, this mode is only used if the -# monitor reports it as being supported (via EDID on DVI-D aka HDMI). -# - -# Please refer to the xorg.conf man page for more configuration -# options provided by the X server, including display-related options -# provided by RandR 1.2 and higher. - -# Disable extensions not useful on Tegra. -Section "Module" - Disable "dri" - Disable "dri2" - Disable "glx" - SubSection "extmod" - Option "omit xfree86-dga" - EndSubSection -EndSection - -Section "Device" - Identifier "Tegra" - Driver "tegra" - -# VirtualDesktop indicates which virtual desktops should be used by X. -# X will use the specified virtual desktop *and* the next one. In -# order for an external app to share a display with the X server, it -# needs to use the same virtual desktop. Valid values are integers 0 -# (default) or 1. - -# Option "VirtualDesktop" "1" - -# OverlayDepth is a 32-bit integer which is used to control overlay -# stacking order. The overlay with the lowest depth is in front of -# all others. This value has meaning only when multiple overlays are -# present on a display. - -# Option "OverlayDepth" "255" - -# OverlayCombineMode determines how the X overlay is combined with the -# overlay behind it during scanout. Available modes are: Opaque -# (default), SourceAlphaBlend, and PremultSourceAlphaBlend. This -# value has meaning only when an external process has created a -# display which is behind the X server. - -# Option "OverlayCombineMode" "PremultSourceAlphaBlend" - -# ARGBHWCursor controls whether the X driver uses an overlay to -# display 32-bit "true-color" cursors, or whether such cursors are -# emulated in software. Valid values are "true" (default) to enable -# hardware cursors, and "false" to disable them. - - Option "ARGBHWCursor" "false" - -# Use monitor section with identifier, enables explicit disabling - Option "Monitor-LVDS-1" "LVDS" - Option "Monitor-HDMI-1" "HDMI" -EndSection - -Section "ServerFlags" - - Option "DefaultServerLayout" "Default Layout" -# Set the basic blanking screen saver timeout in minutes. 0 to disable. - - Option "blank time" "0" - -# Set the DPMS timeouts. These are set here because they are global -# rather than screen-specific. These settings alone don't enable DPMS. -# It is enabled per-screen (or per-monitor), and even then only when -# the driver supports it. - - Option "standby time" "0" - Option "suspend time" "0" - Option "off time" "0" -EndSection - -Section "Monitor" - - Identifier "HDMI" - Option "Ignore" "false" - Option "DPMS" "off" - -# Default orientation -# Option "AboveOf" "LVDS" -# Option "Position" "0 0" - -# Explicitly choose a Resolution (check xrandr for available modes) -# Option "PreferredMode" "1280x720" - -EndSection - -Section "Monitor" - - Identifier "LVDS" - Option "Ignore" "false" - Option "DPMS" "off" - -# Note: It is not possible to use explicit modes here as the mode is inherited -# from the Linux framebuffer -# Check Framebuffer documentation: -# http://developer.toradex.com/knowledge-base/framebuffer-(linux) - -EndSection - -Section "Screen" -# NVIDIA uses only one screen, even in dual head mode -# the gluing logic is in the device section - - Identifier "Common Screen" - Device "Tegra" - -# This is the primary monitor - Monitor "LVDS" - - DefaultDepth 16 - -EndSection - -Section "ServerLayout" - Identifier "Default Layout" - - Screen "Common Screen" -EndSection - -Section "InputClass" - - Identifier "Fusion 7/10" - Driver "evdev" - MatchProduct "fusion_F0710A" - MatchDevicePath "/dev/input/event*" - -EndSection diff --git a/recipes/xorg-xserver/xserver-xf86-config/apalis-tk1/xorg.conf b/recipes/xorg-xserver/xserver-xf86-config/apalis-tk1/xorg.conf deleted file mode 100644 index e69de29..0000000 --- a/recipes/xorg-xserver/xserver-xf86-config/apalis-tk1/xorg.conf +++ /dev/null diff --git a/recipes/xorg-xserver/xserver-xf86-config/colibri-t20/xorg.conf b/recipes/xorg-xserver/xserver-xf86-config/colibri-t20/xorg.conf deleted file mode 100644 index 9aa54a4..0000000 --- a/recipes/xorg-xserver/xserver-xf86-config/colibri-t20/xorg.conf +++ /dev/null @@ -1,135 +0,0 @@ -# This is an optimised configuration for Xorg on the Toradex Tegra based Apalis -# and Colibri modules -# -# In order to disable unused monitor outputs, apply the Option "Ignore" "true" -# (in the monitor section). By defining a particular resolution one can choose -# a preferred mode for all monitors. However, this mode is only used if the -# monitor reports it as being supported (via EDID on DVI-D aka HDMI). -# - -# Please refer to the xorg.conf man page for more configuration -# options provided by the X server, including display-related options -# provided by RandR 1.2 and higher. - -# Disable extensions not useful on Tegra. -Section "Module" - Disable "dri" - Disable "dri2" - Disable "glx" - SubSection "extmod" - Option "omit xfree86-dga" - EndSubSection -EndSection - -Section "Device" - Identifier "Tegra" - Driver "tegra" - -# VirtualDesktop indicates which virtual desktops should be used by X. -# X will use the specified virtual desktop *and* the next one. In -# order for an external app to share a display with the X server, it -# needs to use the same virtual desktop. Valid values are integers 0 -# (default) or 1. - -# Option "VirtualDesktop" "1" - -# OverlayDepth is a 32-bit integer which is used to control overlay -# stacking order. The overlay with the lowest depth is in front of -# all others. This value has meaning only when multiple overlays are -# present on a display. - -# Option "OverlayDepth" "255" - -# OverlayCombineMode determines how the X overlay is combined with the -# overlay behind it during scanout. Available modes are: Opaque -# (default), SourceAlphaBlend, and PremultSourceAlphaBlend. This -# value has meaning only when an external process has created a -# display which is behind the X server. - -# Option "OverlayCombineMode" "PremultSourceAlphaBlend" - -# ARGBHWCursor controls whether the X driver uses an overlay to -# display 32-bit "true-color" cursors, or whether such cursors are -# emulated in software. Valid values are "true" (default) to enable -# hardware cursors, and "false" to disable them. - - Option "ARGBHWCursor" "false" - -# Use monitor section with identifier, enables explicit disabling - Option "Monitor-LVDS-1" "LVDS" - Option "Monitor-HDMI-1" "HDMI" -EndSection - -Section "ServerFlags" - - Option "DefaultServerLayout" "Default Layout" -# Set the basic blanking screen saver timeout in minutes. 0 to disable. - - Option "blank time" "0" - -# Set the DPMS timeouts. These are set here because they are global -# rather than screen-specific. These settings alone don't enable DPMS. -# It is enabled per-screen (or per-monitor), and even then only when -# the driver supports it. - - Option "standby time" "0" - Option "suspend time" "0" - Option "off time" "0" -EndSection - -Section "Monitor" - - Identifier "HDMI" - Option "Ignore" "false" - Option "DPMS" "off" - -# Default orientation -# Option "AboveOf" "LVDS" -# Option "Position" "0 0" - -# Explicitly choose a Resolution (check xrandr for available modes) -# Option "PreferredMode" "1280x720" - -EndSection - -Section "Monitor" - - Identifier "LVDS" - Option "Ignore" "false" - Option "DPMS" "off" - -# Note: It is not possible to use explicit modes here as the mode is inherited -# from the Linux framebuffer -# Check Framebuffer documentation: -# http://developer.toradex.com/knowledge-base/framebuffer-(linux) - -EndSection - -Section "Screen" -# NVIDIA uses only one screen, even in dual head mode -# the gluing logic is in the device section - - Identifier "Common Screen" - Device "Tegra" - -# This is the primary monitor - Monitor "LVDS" - - DefaultDepth 16 - -EndSection - -Section "ServerLayout" - Identifier "Default Layout" - - Screen "Common Screen" -EndSection - -Section "InputClass" - - Identifier "Fusion 7/10" - Driver "evdev" - MatchProduct "fusion_F0710A" - MatchDevicePath "/dev/input/event*" - -EndSection diff --git a/recipes/xorg-xserver/xserver-xf86-config/colibri-t30/xorg.conf b/recipes/xorg-xserver/xserver-xf86-config/colibri-t30/xorg.conf deleted file mode 100644 index 9aa54a4..0000000 --- a/recipes/xorg-xserver/xserver-xf86-config/colibri-t30/xorg.conf +++ /dev/null @@ -1,135 +0,0 @@ -# This is an optimised configuration for Xorg on the Toradex Tegra based Apalis -# and Colibri modules -# -# In order to disable unused monitor outputs, apply the Option "Ignore" "true" -# (in the monitor section). By defining a particular resolution one can choose -# a preferred mode for all monitors. However, this mode is only used if the -# monitor reports it as being supported (via EDID on DVI-D aka HDMI). -# - -# Please refer to the xorg.conf man page for more configuration -# options provided by the X server, including display-related options -# provided by RandR 1.2 and higher. - -# Disable extensions not useful on Tegra. -Section "Module" - Disable "dri" - Disable "dri2" - Disable "glx" - SubSection "extmod" - Option "omit xfree86-dga" - EndSubSection -EndSection - -Section "Device" - Identifier "Tegra" - Driver "tegra" - -# VirtualDesktop indicates which virtual desktops should be used by X. -# X will use the specified virtual desktop *and* the next one. In -# order for an external app to share a display with the X server, it -# needs to use the same virtual desktop. Valid values are integers 0 -# (default) or 1. - -# Option "VirtualDesktop" "1" - -# OverlayDepth is a 32-bit integer which is used to control overlay -# stacking order. The overlay with the lowest depth is in front of -# all others. This value has meaning only when multiple overlays are -# present on a display. - -# Option "OverlayDepth" "255" - -# OverlayCombineMode determines how the X overlay is combined with the -# overlay behind it during scanout. Available modes are: Opaque -# (default), SourceAlphaBlend, and PremultSourceAlphaBlend. This -# value has meaning only when an external process has created a -# display which is behind the X server. - -# Option "OverlayCombineMode" "PremultSourceAlphaBlend" - -# ARGBHWCursor controls whether the X driver uses an overlay to -# display 32-bit "true-color" cursors, or whether such cursors are -# emulated in software. Valid values are "true" (default) to enable -# hardware cursors, and "false" to disable them. - - Option "ARGBHWCursor" "false" - -# Use monitor section with identifier, enables explicit disabling - Option "Monitor-LVDS-1" "LVDS" - Option "Monitor-HDMI-1" "HDMI" -EndSection - -Section "ServerFlags" - - Option "DefaultServerLayout" "Default Layout" -# Set the basic blanking screen saver timeout in minutes. 0 to disable. - - Option "blank time" "0" - -# Set the DPMS timeouts. These are set here because they are global -# rather than screen-specific. These settings alone don't enable DPMS. -# It is enabled per-screen (or per-monitor), and even then only when -# the driver supports it. - - Option "standby time" "0" - Option "suspend time" "0" - Option "off time" "0" -EndSection - -Section "Monitor" - - Identifier "HDMI" - Option "Ignore" "false" - Option "DPMS" "off" - -# Default orientation -# Option "AboveOf" "LVDS" -# Option "Position" "0 0" - -# Explicitly choose a Resolution (check xrandr for available modes) -# Option "PreferredMode" "1280x720" - -EndSection - -Section "Monitor" - - Identifier "LVDS" - Option "Ignore" "false" - Option "DPMS" "off" - -# Note: It is not possible to use explicit modes here as the mode is inherited -# from the Linux framebuffer -# Check Framebuffer documentation: -# http://developer.toradex.com/knowledge-base/framebuffer-(linux) - -EndSection - -Section "Screen" -# NVIDIA uses only one screen, even in dual head mode -# the gluing logic is in the device section - - Identifier "Common Screen" - Device "Tegra" - -# This is the primary monitor - Monitor "LVDS" - - DefaultDepth 16 - -EndSection - -Section "ServerLayout" - Identifier "Default Layout" - - Screen "Common Screen" -EndSection - -Section "InputClass" - - Identifier "Fusion 7/10" - Driver "evdev" - MatchProduct "fusion_F0710A" - MatchDevicePath "/dev/input/event*" - -EndSection diff --git a/recipes/xorg-xserver/xserver-xf86-config/colibri-vf/xorg.conf b/recipes/xorg-xserver/xserver-xf86-config/colibri-vf/xorg.conf deleted file mode 100644 index ee77e84..0000000 --- a/recipes/xorg-xserver/xserver-xf86-config/colibri-vf/xorg.conf +++ /dev/null @@ -1,39 +0,0 @@ -# Default Xorg configuration for Toradex Colibri VF50/VF61 modules -# (Freescale/NXP Vybrid based modules) -# -# This configuration uses the Xorg modesetting DDX driver, which requires -# the DRM based DCU kernel driver (CONFIG_DRM_FSL_DCU) -# - -Section "Device" - Identifier "FSL-DCU" - Driver "modesetting" - Option "kmsdev" "/dev/dri/card0" -EndSection - -Section "Monitor" - Identifier "LCD" - Option "DPMS" "off" -EndSection - -Section "Screen" - Identifier "Main" - Device "FSL-DCU" - Monitor "LCD" - DefaultDepth 16 -EndSection - -Section "ServerFlags" - Option "BlankTime" "0" - Option "StandbyTime" "0" - Option "SuspendTime" "0" - Option "OffTime" "0" -EndSection - -Section "InputClass" - Identifier "Fusion 7/10" - Driver "evdev" - MatchProduct "fusion_F0710A" - MatchDevicePath "/dev/input/event*" -EndSection - diff --git a/recipes/xorg-xserver/xserver-xf86-config_0.1.bbappend b/recipes/xorg-xserver/xserver-xf86-config_0.1.bbappend deleted file mode 100644 index 3feb3b1..0000000 --- a/recipes/xorg-xserver/xserver-xf86-config_0.1.bbappend +++ /dev/null @@ -1 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/xserver-xf86-config:" |