trdx-image-fstype: pull out common files

Pull out common files of the module specific trees into the common library
directory and symlink the files.

4 files changed, 4 insertions, 564 deletions

diff --git a/recipes/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh b/recipes/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh
index 2a4e898..ce71dbd 100755..120000
--- a/recipes/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh
+++ b/recipes/images/files/colibri-t30/colibri-t30_bin/mk-u-boot-scripts.sh
@@ -1,5 +1 @@
-#!/bin/sh
-for f in *.scr
-do
-	mkimage -T script -C none -n 'Flash Apalis iMX6' -d $f `basename $f .scr`.img
-done	
+../../library/mk-u-boot-scripts.sh
\ No newline at end of file
diff --git a/recipes/images/files/colibri-t30/create_configblock.sh b/recipes/images/files/colibri-t30/create_configblock.sh
index a33600a..c8bdac7 100755..120000
--- a/recipes/images/files/colibri-t30/create_configblock.sh
+++ b/recipes/images/files/colibri-t30/create_configblock.sh
@@ -1,206 +1 @@
-#! /bin/sh
-
-Usage()
-{
-	echo "create_configblock creates a configblock binary from the info on the module sticker."
-	echo "This can be used when the configblock got lost during a failed update attempt."
-	echo "The created configblock can then be written to the module with:"
-	echo "update.sh -c"
-	echo ""
-}
-
-while getopts "h" Option ; do
-        case $Option in
-                h) Usage
-                        # Exit if only usage (-h) was specfied.
-                        if [ "$#" -eq 1 ] ; then
-                                exit 10
-                        fi
-                        exit 0
-                        ;;
-        esac
-done
-
-# autotect MODTYPE from from rootfs directory
-CNT=`grep -c "T20" rootfs/etc/issue || true`
-if [ ${CNT} -ge 1 ] ; then
-	echo "Colibri T20 rootfs detected"
-	MODTYPE=colibri-t20
-	BOOT_DEVICE=nand
-else
-	CNT=`grep -c "T30" rootfs/etc/issue || true`
-	if [ ${CNT} -ge 1 ] ; then
-		CNT=`grep -c "Apalis" rootfs/etc/issue || true`
-		if [ ${CNT} -ge 1 ] ; then
-			echo "Apalis T30 rootfs detected"
-			MODTYPE=apalis-t30
-		else
-			echo "Colibri T30 rootfs detected"
-			MODTYPE=colibri-t30
-		fi
-	else
-		CNT=`grep -c "VF" rootfs/etc/issue || true`
-		if [ "$CNT" -ge 1 ] ; then
-			CNT=`grep -c "VF50" rootfs/etc/issue || true`
-			if [ "$CNT" -ge 1 ] ; then
-				echo "Colibri VF50 rootfs detected"
-				MODTYPE=colibri-vf50
-			else
-				echo "Colibri VF61 rootfs detected"
-				MODTYPE=colibri-vf61
-			fi
-		else
-			CNT=`grep -c "Colibri_iMX6" rootfs/etc/issue || true`
-			if [ "$CNT" -ge 1 ] ; then
-				echo "Colibri iMX6 rootfs detected"
-				MODTYPE=colibri-imx6
-			else
-				CNT=`grep -ic "imx6" rootfs/etc/issue || true`
-				if [ "$CNT" -ge 1 ] ; then
-					echo "Apalis iMX6 rootfs detected"
-					MODTYPE=apalis-imx6
-				else
-					echo "can not detect modulue type from ./rootfs/etc/issue"
-					echo "exiting"
-					exit 1
-				fi
-			fi
-		fi
-	fi
-fi
-
-echo "Enter the modules serial number on the modules sticker or"
-echo "use a barcode scanner to enter the content of the stickers barcode"
-
-# read a barcode and test it to be 8 or 16 numbers only 0025100102489109 0115100000000024
-#                                                       1234567890123456 1234567890123456
-until [ "${BARCODE}x" != "x" ]
-do
-	read BARCODE
-	#remove all whitespace
-	BARCODE=`echo $BARCODE | tr -d ' '`	
-	#get strlen and the number of numeric characters
-	STRLEN=`echo $BARCODE  | wc -c`
-	NUMCNT=`echo $BARCODE | sed 's/[^0-9]//g' | wc -c`
-	if [ $STRLEN -ne 17 ] ; then 
-		if [ $STRLEN -ne 9 ] ; then
-			echo "The serial number must be 8 numbers long (the barcode 16)"
-			BARCODE=""
-		fi
-	fi
-	if [ $NUMCNT -ne $STRLEN ] ; then
-		echo "The serial number must contain all numeric characters"
-		BARCODE=""
-	fi
-done
-DATECODE=19700101000000
-if [ $STRLEN -eq 17 ] ; then
-	SERIALNR=`echo $BARCODE | awk 'BEGIN{ FIELDWIDTHS = "8 8"} {print $2}'`
-	PRODUCTNR=`echo $BARCODE | awk 'BEGIN{ FIELDWIDTHS = "8 8"} {print $1}'`
-else
-	SERIALNR=$BARCODE
-	CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock.bin
-	case ${MODTYPE} in
-	"colibri-t20")
-		RAM_SIZE=256
-		echo "Enter the RAM size ( 256 / 512 ):"
-		read RAM_SIZE
-		echo "Enter I for IT version, nothing otherwise"
-		read IT
-		if [ $RAM_SIZE -eq 512 ] ; then
-			if [ "$IT"x = "I" ] ; then
-				PROD_ID="0022"
-			else
-				PROD_ID="0021"
-			fi
-			CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock_512.bin
-
-		else
-			if [ "$IT"x = "I" ] ; then
-				PROD_ID="0024"
-			else
-				PROD_ID="0020"
-			fi
-			PROD_ID="0020"
-			CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock_256.bin
-		fi
-		;;
-	"colibri-t30")
-		PROD_ID="0023"
-		;;
-	"apalis-t30")
-		PROD_ID="0025"
-		;;
-	"colibri-vf50")
-		PROD_ID="0010"
-		;;
-	"colibir-vf61")
-		PROD_ID="0011"
-		;;
-	"apalis-imx6")
-		PROD_ID="0027"
-		;;
-	"colibri-imx6")
-		RAM_SIZE=256
-		echo "Enter the RAM size ( 256 / 512 ):"
-		read RAM_SIZE
-		echo "Enter I for IT version, nothing otherwise"
-		read IT
-		if [ $RAM_SIZE -eq 512 ] ; then
-			if [ "$IT"x = "I" ] ; then
-				PROD_ID="0017"
-			else
-				PROD_ID="0015"
-			fi
-			CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock.bin
-
-		else
-			if [ "$IT"x = "I" ] ; then
-				PROD_ID="0016"
-			else
-				PROD_ID="0014"
-			fi
-			CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock.bin
-		fi
-		;;
-	esac
-
-	echo "Enter the module version, e.g. V1.2 C"
-	read PRODVERSION
-	VER_MAJ=`echo $PRODVERSION | awk 'BEGIN{ FIELDWIDTHS = "1 1 1 1 1 1"} {print $2}'`
-	VER_MIN=`echo $PRODVERSION | awk 'BEGIN{ FIELDWIDTHS = "1 1 1 1 1 1"} {print $4}'`
-	#VARIANT: A=0, B=1 ...
-	VARIANT=`echo $PRODVERSION | awk 'BEGIN{ FIELDWIDTHS = "1 1 1 1 1 1"} {print $6}'`
-	VARIANT=`printf "%d\n" "'$VARIANT"`
-	VARIANT=`expr $VARIANT - 65`
-	if [ "$VARIANT" -lt 10 ] ; then
-		VARIANT=0$VARIANT
-	fi
-	PRODUCTNR=${PROD_ID}${VER_MAJ}${VER_MIN}${VARIANT}
-fi
-
-#write the config block file
-if [ "${MODTYPE}" = "colibri-t20" ] ; then
-	PROD_ID=`echo $PRODUCTNR | awk 'BEGIN{ FIELDWIDTHS = "4 4"} {print $1}'`
-	CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock_256.bin
-	if [ ${PROD_ID} = "0021" ] ; then
-		CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock_512.bin
-	fi
-	if [ ${PROD_ID} = "0022" ] ; then
-		CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock_512.bin
-	fi
-else
-	CONFIGBLOCK_FILE=${MODTYPE}_bin/configblock.bin
-fi
-sudo chown ${USER}: ${MODTYPE}_bin
-sudo rm -f $CONFIGBLOCK_FILE
-#file header
-awk 'function sc(c) {return (c<128?c:(c-256))} BEGIN{printf "%c%c%c%c",0,64,1,-49}' > $CONFIGBLOCK_FILE
-#mac addr / serial
-echo $SERIALNR | awk 'function sc(c) {return (c<128?c:(c-256))} {printf "%c%c%c%c%c%c%c%c%c%c%c%c",2,64,0,0, 0,20,45, sc(int($0/256/256)), sc(int($0/256)%256), sc($0%256),0,0 }' >> $CONFIGBLOCK_FILE
-#product describtion, $1 char 0/1: ??, $2 char 2/3: ProdID, $3 char 4:VerMaj, $4 char 5:VerMin, $5 char 6/7:Variant
-echo $PRODUCTNR | awk 'BEGIN{ FIELDWIDTHS = "2 2 1 1 2"} function sc(c) {return (c<128?c:(c-256))} {printf "%c%c%c%c%c%c%c%c%c%c%c%c",2,64,8,0 ,sc($3),0, sc($4),0, sc($5),0, sc($2),0 }' >> $CONFIGBLOCK_FILE
-#fill to 32 bytes
-awk 'function sc(c) {return (c<128?c:(c-256))} BEGIN{printf "%c%c%c%c",-1,-1,-1,-1}' >> $CONFIGBLOCK_FILE
-
-exit 0
+../library/create_configblock.sh
\ No newline at end of file
diff --git a/recipes/images/files/colibri-t30/tegra-uboot-flasher/genext3fs.sh b/recipes/images/files/colibri-t30/tegra-uboot-flasher/genext3fs.sh
index 3c8ecc8..cc716db 100755..120000
--- a/recipes/images/files/colibri-t30/tegra-uboot-flasher/genext3fs.sh
+++ b/recipes/images/files/colibri-t30/tegra-uboot-flasher/genext3fs.sh
@@ -1,80 +1 @@
-#!/bin/sh
-#creates a file containing a ext3 binary blob of the content of the ../rootfs folder
-
-# sometimes we need the binary echo, not the shell builtin
-ECHO=`which echo`
-
-MOUNTPOINT="mnt/trdx-rootfs"
-
-Usage()
-{
-	echo "creates a file containing a ext3 binary blob. Output file name taken from command line"
-	echo "Usage: genext3fs.sh [OPTION]... dest_file_name"
-	echo "-h : Prints this message"
-	echo "-b : Sets the partition size in MBytes, default 256"
-	echo "-d : Selects the directory which contains the partition content, default ../rootfs"
-	echo ""
-}
-
-PARTITIONSIZE=256
-SRCPATH=../rootfs
-
-while getopts "b:d:h" Option ; do
-	case $Option in
-		h) Usage
-			# Exit if only usage (-h) was specfied.
-			if [[ "$#" -eq "1" ]] ; then
-				exit 10
-			fi
-			exit 0
-			;;
-		b) PARTITIONSIZE=$OPTARG
-			;;
-		d) SRCPATH=$OPTARG
-			;;
-	esac
-done
-#adjust the commandline arg for the now used options
-shift $(($OPTIND - 1))
-
-#create the file used for the loopbackdevice and format it for ext3
-#answer y to "is not a block special device"
-dd if=/dev/zero of=$@ bs=1024k count=$PARTITIONSIZE
-mkfs.ext3 -F -L arm $@
-#disable fsck checks based on mount count or time interval
-tune2fs -c 0 -i 0 $@
-
-#prepare mountpoint for the loopdevice 
-sudo mkdir -p $MOUNTPOINT
-sudo umount $MOUNTPOINT &> /dev/null
-sudo rm -rf $MOUNTPOINT/*
-#mount the file as a loopdevice 
-#there seems to be a race between mkfs.ext3 not yet finished and mount already trying to mount, so try until it works
-MOUNTED=0
-while [ "$MOUNTED" -eq  "0" ] ; do
-	sync
-	sleep 1
-	sudo mount $@ $MOUNTPOINT/ -o loop -t ext3
-	MOUNTED=`mount | grep -c "$MOUNTPOINT"`
-done
-#extract rootfs into the file
-sudo cp -rpP $SRCPATH/* $MOUNTPOINT
-if [ "$?" -ne "0" ] ; then
-	$ECHO -e "\033[1mCopying the rootfs failed.\033[0m"
-	echo "Check for error messages from cp"
-	sudo rm $@
-	exit 1
-fi
-
-#unmount again
-sudo umount $MOUNTPOINT
-
-#if the mounting was unsuccesful all rootfs data now still is in MOUNTPOINT, and $@ contains an empty fs
-#delete $@ in that case to fail early
-sync
-FAILED=`ls $MOUNTPOINT | wc -l`
-if [ "$FAILED" -ne "0" ] ; then
-	$ECHO -e "\033[1mMounting the loopdevice $@ failed.\033[0m"
-	sudo rm $@
-	exit 1
-fi
+../../library/genext3fs.sh
\ No newline at end of file
diff --git a/recipes/images/files/colibri-t30/update.sh b/recipes/images/files/colibri-t30/update.sh
index 21b4ac6..fb897ec 100755..120000
--- a/recipes/images/files/colibri-t30/update.sh
+++ b/recipes/images/files/colibri-t30/update.sh
@@ -1,273 +1 @@
-#!/bin/sh
-# Prepare files needed for flashing a Apalis/Colibri T30 module
-#
-# inspired by meta-fsl-arm/classes/image_types_fsl.bbclass
-
-# sometimes we need the binary echo, not the shell builtin
-ECHO=`which echo`
-#some distros have fs tools only in root's path
-PARTED=`which parted` 2> /dev/null
-if [ -e "$PARTED" ] ; then
-	MKFSVFAT=`which mkfs.vfat`
-else
-	PARTED=`sudo which parted`
-	MKFSVFAT=`sudo which mkfs.vfat`
-fi
-
-Flash()
-{
-	echo ""
-	echo "To flash the Apalis/Colibri T30 module, boot the module to the U-Boot prompt and"
-	echo ""
-	echo "when using a SD-card, insert the SD-card and enter:"
-	echo "run setupdate"
-	echo ""
-	echo "when using tftp, connect Ethernet and enter:"
-	echo "tftp \$loadaddr flash_eth.img ; source \$loadaddr"
-	echo ""
-	echo "then enter to update all:"
-	echo "run update"
-	echo ""
-	echo "to update a single component enter one of:"
-	echo "run update_uboot"
-	echo "run update_kernel"
-	echo ""
-	echo ""
-	echo "If you don't have a working U-Boot anymore, connect your PC to the module's"
-	echo "USB client port, bring the module in the serial download mode and start"
-	echo "the update.sh script with the -d option. This will copy U-Boot into the"
-	echo "modules RAM and execute it."
-}
-
-Usage()
-{
-	echo ""
-	echo "Prepares and copies files for flashing the internal eMMC of a Apalis/Colibri T30"
-	echo ""
-	echo "Will require a running U-Boot on the target. Either one already flashed"
-	echo "on the eMMC or one copied over usb into the module's RAM"
-	echo ""
-	echo "-d           : use USB connection to copy and execute U-Boot to the module's RAM"
-	echo "-h           : Prints this message"
-	echo "-o directory : output directory, defaults to /media/KERNEL"
-	echo "               if this is on a SD card, it should be the"
-	echo "               first partition formated with VFAT"
-	echo ""
-	echo "Example \"./update.sh\" copies the requiered files to /media/KERNEL/"
-	echo "Example \"./update.sh -o /srv/tftp/\" copies the requiered files to /srv/tftp/"
-	echo ""
-	echo ""
-	Flash
-}
-
-#initialise options
-UBOOT_RECOVERY=0
-OUT_DIR="/media/KERNEL"
-MIN_PARTITION_FREE_SIZE=100
-ROOTFSPATH=rootfs
-# No devicetree by default
-KERNEL_DEVICETREE=""
-KERNEL_IMAGETYPE="uImage"
-
-while getopts "dho:" Option ; do
-	case $Option in
-		d)	UBOOT_RECOVERY=1
-			;;
-		h) 	Usage
-			# Exit if only usage (-h) was specfied.
-			if [ "$#" -eq 1 ] ; then
-				exit 10
-			fi
-			exit 0
-			;;
-		o)	OUT_DIR=$OPTARG
-			;;
-	esac
-done
-
-# autotect MODTYPE from from rootfs directory
-CNT=`grep -ic "t30" rootfs/etc/issue || true`
-if [ "$CNT" -ge 1 ] ; then
-	CNT=`grep -ic "apalis" rootfs/etc/issue || true`
-	if [ "$CNT" -ge 1 ] ; then
-		echo "Apalis T30 rootfs detected"
-		MODTYPE=apalis-t30
-		IMAGEFILE=root.ext3
-		U_BOOT_BINARY=u-boot-dtb-tegra.bin
-		KERNEL_DEVICETREE="tegra30-apalis-eval.dtb"
-		LOCPATH="tegra-uboot-flasher"
-		# eMMC size [in sectors of 512]
-		EMMC_SIZE=$(expr 1024 \* 3500 \* 2)
-		BCT=apalis_t30_12MHz_MT41K512M8RH-125_533MHz.bct
-		CBOOT_IMAGE=apalis_t30.img
-	else
-		echo "Colibri T30 rootfs detected"
-		MODTYPE=colibri-t30
-		IMAGEFILE=root.ext3
-		U_BOOT_BINARY=u-boot-dtb-tegra.bin
-		KERNEL_DEVICETREE="tegra30-colibri-eval-v3.dtb"
-		LOCPATH="tegra-uboot-flasher"
-		EMMC_SIZE=$(expr 1024 \* 2000 \* 2)
-		# with new kernel, boot with 400MHz, then switch between 400 & 800
-		BCT=colibri_t30_12MHz_NT5CC256M16CP-DI_400MHz.bct
-#		BCT=colibri_t30_12MHz_NT5CC256M16CP-DI_533MHz.bct
-		CBOOT_IMAGE=colibri_t30.img
-	fi
-else
-	echo "can not detect module type from ./rootfs/etc/issue"
-	echo "exiting"
-	exit 1
-fi
-BINARIES=${MODTYPE}_bin
-
-#is only U-Boot to be copied to RAM?
-if [ "$UBOOT_RECOVERY" -ge 1 ] ; then
-	cd ${LOCPATH}
-	sudo ./tegrarcm --bct=../${BINARIES}/${BCT} --bootloader=../${BINARIES}/${U_BOOT_BINARY} --loadaddr=0x80108000
-	exit 1
-fi
-
-# is OUT_DIR an existing directory?
-if [ ! -d "$OUT_DIR" ] ; then
-	echo "$OUT_DIR" "does not exist, exiting"
-	exit 1
-fi
-
-#sanity check for correct untared rootfs
-DEV_OWNER=`ls -ld rootfs/dev | awk '{print $3}'`
-if [ "${DEV_OWNER}x" != "rootx" ]
-then
-	$ECHO -e "rootfs/dev is not owned by root, but it should!"
-	$ECHO -e "\033[1mPlease unpack the tarball with root rights.\033[0m"
-	$ECHO -e "e.g. sudo tar xjvf Apalis_T30_LinuxImageV2.1_20140201.tar.bz2"
-	exit 1
-fi
-
-#sanity check for existens of U-Boot and kernel
-[ -e ${BINARIES}/${U_BOOT_BINARY} ] || { echo "${BINARIES}/${U_BOOT_BINARY} does not exist"; exit 1; }
-[ -e ${BINARIES}/uImage ] || { echo "${BINARIES}/uImage does not exist"; exit 1; }
-
-#sanity check for some programs
-MCOPY=`sudo which mcopy`
-[ "${MCOPY}x" != "x" ] || { echo >&2 "Program mcopy not available.  Aborting."; exit 1; }
-sudo ${PARTED} -v >/dev/null 2>&1 || { echo >&2 "Program parted not available.  Aborting."; exit 1; }
-[ "${MKFSVFAT}x" != "x" ] || { echo >&2 "Program mkfs.vfat not available.  Aborting."; exit 1; }
-MKFSEXT3=`sudo which mkfs.ext3`
-[ "${MKFSEXT3}x" != "x" ] || { echo >&2 "Program mkfs.ext3 not available.  Aborting."; exit 1; }
-awk -V  >/dev/null 2>&1 || { echo >&2 "Program awk not available.  Aborting."; exit 1; }
-dd --help >/dev/null 2>&1 || { echo >&2 "Program dd not available.  Aborting."; exit 1; }
-tegra-uboot-flasher/cbootimage -h >/dev/null 2>&1
-[ "$?" -lt 2 ] || { echo >&2 "Program cbootimage not available. 32bit compatibility libs?  Aborting."; exit 1; }
-
-#make the directory with the outputfiles writable
-sudo chown $USER: ${BINARIES}
-
-#make a file with the used versions for U-Boot, kernel and rootfs
-rm ${BINARIES}/versions.txt
-touch ${BINARIES}/versions.txt
-echo "Component Versions" > ${BINARIES}/versions.txt
-basename "`readlink -e ${BINARIES}/${U_BOOT_BINARY}`" >> ${BINARIES}/versions.txt
-basename "`readlink -e ${BINARIES}/uImage`" >> ${BINARIES}/versions.txt
-$ECHO -n "Rootfs " >> ${BINARIES}/versions.txt
-grep -i t30 rootfs/etc/issue >> ${BINARIES}/versions.txt
-
-
-# The emmc layout used is:
-#
-# boot area partition 1 aka eMMC boot sector:
-#
-# with cbootimage containing BCT and U-Boot boot loader
-#
-# user area aka general purpose eMMC region:
-#
-#    0                      -> IMAGE_ROOTFS_ALIGNMENT         - reserved to bootloader (not partitioned)
-#    IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE                     - kernel and other data
-#    BOOT_SPACE             -> SDIMG_SIZE                     - rootfs
-#
-#                                                     Default Free space = 1.3x
-#                                                     Use IMAGE_OVERHEAD_FACTOR to add more space
-#                                                     <--------->
-#            4MiB               16MiB           SDIMG_ROOTFS                    4MiB
-# <-----------------------> <----------> <----------------------> <------------------------------>
-#  ------------------------ ------------ ------------------------ -------------------------------
-# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE            |     IMAGE_ROOTFS_ALIGNMENT    |
-#  ------------------------ ------------ ------------------------ -------------------------------
-# ^                        ^            ^                        ^                               ^
-# |                        |            |                        |                               |
-# 0                      4096     4MiB +  16MiB       4MiB +  16Mib + SDIMG_ROOTFS   4MiB +  16MiB + SDIMG_ROOTFS + 4MiB
-#
-# with the U-Boot environment at 512 * 1024, the config block is at 640 * 1024
-
-
-# generate cbootimage containing BCT and U-Boot boot loader
-cd ${BINARIES}
-sudo ../${LOCPATH}/cbootimage -s tegra30 ${CBOOT_IMAGE}.cfg ${CBOOT_IMAGE}
-cd ..
-
-
-# Boot partition [in sectors of 512]
-BOOT_START=$(expr 4096 \* 2)
-# Rootfs partition [in sectors of 512]
-ROOTFS_START=$(expr 20480 \* 2)
-# Boot partition volume id
-BOOTDD_VOLUME_ID="Boot"
-
-#make the partition size size(rootfs used + MIN_PARTITION_FREE_SIZE)
-#add about 4% to the rootfs to account for fs overhead. (/1024/985 instead of /1024/1024).                                                                                    
-#add 512 bytes per file to account for small files
-NUMBER_OF_FILES=`sudo find ${ROOTFSPATH} | wc -l`
-EXT_SIZE=`sudo du -DsB1 ${ROOTFSPATH} | awk -v min=$MIN_PARTITION_FREE_SIZE -v f=${NUMBER_OF_FILES} \
-		'{rootfs_size=$1+f*512;rootfs_size=int(rootfs_size/1024/985); print (rootfs_size+min) }'`
-
-echo ""
-echo "Creating MBR file and do the partitioning"
-# Initialize a sparse file
-dd if=/dev/zero of=${BINARIES}/mbr.bin bs=512 count=0 seek=${EMMC_SIZE}
-${PARTED} -s ${BINARIES}/mbr.bin mklabel msdos
-${PARTED} -a none -s ${BINARIES}/mbr.bin unit s mkpart primary fat32 ${BOOT_START} $(expr ${ROOTFS_START} - 1 )
-# the partition spans to the end of the disk, even though the fs size will be smaller
-# on the target the fs is then grown to the full size
-${PARTED} -a none -s ${BINARIES}/mbr.bin unit s mkpart primary ext2 ${ROOTFS_START} $(expr ${EMMC_SIZE} \- ${ROOTFS_START} \- 1)
-${PARTED} -s ${BINARIES}/mbr.bin unit s print 
-# get the size of the VFAT partition
-BOOT_BLOCKS=$(LC_ALL=C ${PARTED} -s ${BINARIES}/mbr.bin unit b print \
-	| awk '/ 1 / { print int(substr($4, 1, length($4 -1)) / 1024) }')
-# now crop the file to only the MBR size
-IMG_SIZE=512
-truncate -s $IMG_SIZE ${BINARIES}/mbr.bin
-
-
-echo ""
-echo "Creating VFAT partion image with the kernel"
-rm -f ${BINARIES}/boot.vfat
-${MKFSVFAT} -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${BINARIES}/boot.vfat $BOOT_BLOCKS 
-export MTOOLS_SKIP_CHECK=1
-mcopy -i ${BINARIES}/boot.vfat -s ${BINARIES}/uImage ::/uImage
-
-# Copy device tree file
-if test -n "${KERNEL_DEVICETREE}"; then
-	for DTS_FILE in ${KERNEL_DEVICETREE}; do
-		DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
-		if [ -e "${BINARIES}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
-			kernel_bin="`readlink ${BINARIES}/${KERNEL_IMAGETYPE}`"
-			kernel_bin_for_dtb="`readlink ${BINARIES}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MODTYPE},g;s,\.dtb$,.bin,g"`"
-			if [ "$kernel_bin" = "$kernel_bin_for_dtb" ]; then
-				mcopy -i ${BINARIES}/boot.vfat -s ${BINARIES}/${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
-				#copy also to out_dir
-				sudo cp ${BINARIES}/${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb "$OUT_DIR/${DTS_BASE_NAME}.dtb"
-			fi
-		fi
-	done
-fi
-
-echo ""
-echo "Creating rootfs partion image"
-rm -f ${BINARIES}/${IMAGEFILE}
-sudo $LOCPATH/genext3fs.sh -d rootfs -b ${EXT_SIZE} ${BINARIES}/${IMAGEFILE} || exit 1
-
-
-#copy to $OUT_DIR
-sudo cp ${BINARIES}/configblock.bin ${BINARIES}/${CBOOT_IMAGE} ${BINARIES}/uImage ${BINARIES}/mbr.bin ${BINARIES}/boot.vfat ${BINARIES}/${IMAGEFILE} ${BINARIES}/flash*.img ${BINARIES}/versions.txt "$OUT_DIR"
-sync
-
-Flash
+../library/t30/update.sh
\ No newline at end of file