u-boot-toradex.git, branch 2012.10-at91-ts1

ARM: sama5d3: change the nand partition table

2013-01-30T10:29:24+00:00

Signed-off-by: Bo Shen

GMAC: fix typo in gmac driver file

2013-01-30T10:29:24+00:00

Signed-off-by: Bo Shen

arm: at91sama5ek: code clean up.

2013-01-30T10:29:24+00:00

  - update file header
  - remove useless code
  - align the code

Signed-off-by: Bo Shen

arm: atmel: sama5: remove machine id

2013-01-30T10:29:24+00:00

Signed-off-by: Bo Shen

sama5: modify dtb update stuff to fit new dtb files

2013-01-29T11:18:40+00:00

There is a rework on dtb files at kernel side requiring some changes for ISI
node update.

Signed-off-by: Ludovic Desroches

sama5: add dtb on the fly update

2013-01-28T16:14:08+00:00

Before booting the Linux kernel, dtb will be updated. The atmel,mb-rev is
added and the isi pinctrl is updated for rev B motherboard.

Signed-off-by: Ludovic Desroches

at91sama5: nand: PMECC change ecc correctable bits to 4bits.

2013-01-25T03:07:36+00:00

at91sama5d31: for TFTP, sama5d31 emac meet many timeout for receiving packets.

2013-01-25T02:59:52+00:00

Root cause is NOT found. So for tempory make user feel better:
 1. increase retry count. from 20 -> 50.
 2. shorten the timeout wait time to minimum 1s.

Signed-off-by: Josh Wu

atmel_nand: add CONFIG_SYS_NAND_ONFI_DETECTION macro, otherwise it will meet compile error when CONFIG_SYS_NAND_ONFI_DETECTION is not defined.

2012-12-05T02:05:01+00:00

MTD: at91: atmel_nand: since PMECC support different ecc

2012-11-30T08:59:26+00:00

 correctable bits(2, 4, 8, 12, 24), add code to choose
 the ecc bits according to the ONFI parameter's minimum
 required ecc_bits.

we'll check the ecc_bits (minimum required ecc correct bits) in ONFI parameter.
If ecc_bits is smaller compare with CONFIG_PMECC_CAP in config file, then use ecc_bits. otherwise use CONFIG_PMECC_CAP.

for non-ONFI support nand flash, we assume its minimum ecc_bits is 1.