u-boot-toradex.git/api/Kconfig, branch master U-Boot bootloader for Apalis and Colibri modules examples: eliminate CONFIG_STANDALONE_LOAD_ADDR 2025-02-04T17:57:36+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2025-01-27T07:18:46+00:00 72bbb645b365c19def1527855248c11ec9665f28 CONFIG_STANDALONE_LOAD_ADDR has been used for examples/standalone but not for examples/api. The suitability of an address to load an ELF binary and run it does not only depend on the architecture but also on the memory layout of the board which is not reflected in the default value of CONFIG_STANDALONE_LOAD_ADDR. Commit 32b7e39db4d3 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig") set the default on RISC-V to 0x0 though most boards used 0x80200000 before the patch. On most boards we can assume 8 MiB of memory available above $loadaddr. So we can safely use $loadaddr + 4 MiB as load address for the standalone example and eliminate CONFIG_STANDALONE_LOAD_ADDR altogether. Fixes: 32b7e39db4d3 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
CONFIG_STANDALONE_LOAD_ADDR has been used for examples/standalone
but not for examples/api.

The suitability of an address to load an ELF binary and run it does
not only depend on the architecture but also on the memory layout of
the board which is not reflected in the default value of
CONFIG_STANDALONE_LOAD_ADDR.

Commit 32b7e39db4d3 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig")
set the default on RISC-V to 0x0 though most boards used 0x80200000
before the patch.

On most boards we can assume 8 MiB of memory available above $loadaddr.
So we can safely use $loadaddr + 4 MiB as load address for the standalone
example and eliminate CONFIG_STANDALONE_LOAD_ADDR altogether.

Fixes: 32b7e39db4d3 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
api: Rework menu, and make it depend on CC_IS_GCC 2023-04-25T19:31:28+00:00 Tom Rini trini@konsulko.com 2023-04-06T13:48:58+00:00 ac44c6cf957a91cea5271334c2d6e6cd867cb5d6 We can only use the old U-Boot API for standalone applications when building U-Boot with GCC as it relies upon the "gd is a register" trick that only GCC supports. Further, rework the rest of the options so that they are in the API menu and only visible if API support is enabled. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
We can only use the old U-Boot API for standalone applications when
building U-Boot with GCC as it relies upon the "gd is a register" trick
that only GCC supports. Further, rework the rest of the options so that
they are in the API menu and only visible if API support is enabled.

Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
api: move API related config options into submenu 2023-03-30T19:09:58+00:00 Heinrich Schuchardt heinrich.schuchardt@canonical.com 2023-03-03T22:31:22+00:00 fef0f1cc38a19f68e215fcc2504b4f60005179a2 Kconfig settings that are related to the API for standalone applications should be in the API sub-menu and not on the top level. CONFIG_STANDALONE_LOAD_ADDR is only relevant if standalone example applications are built. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> 
Kconfig settings that are related to the API for standalone applications
should be in the API sub-menu and not on the top level.

CONFIG_STANDALONE_LOAD_ADDR is only relevant if standalone example
applications are built.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig 2022-12-22T15:31:48+00:00 Tom Rini trini@konsulko.com 2022-12-02T21:42:44+00:00 32b7e39db4d3af0d94f1387a7641152f375b23ac This converts the following to Kconfig: CONFIG_STANDALONE_LOAD_ADDR Signed-off-by: Tom Rini <trini@konsulko.com> 
This converts the following to Kconfig:
   CONFIG_STANDALONE_LOAD_ADDR

Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_SYS_MMC_MAX_DEVICE to Kconfig 2022-11-10T15:08:55+00:00 Tom Rini trini@konsulko.com 2022-10-29T00:27:06+00:00 9ba938e744d81e0164f5abbd087c461596ad63d4 This converts the following to Kconfig: CONFIG_SYS_MMC_MAX_DEVICE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> 
This converts the following to Kconfig:
   CONFIG_SYS_MMC_MAX_DEVICE

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Kconfig: Remove all default n/no options 2021-08-31T21:47:49+00:00 Michal Simek michal.simek@xilinx.com 2021-08-27T06:48:10+00:00 b4c2c151b14b59a2403675526adf666710cade67 default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com> 
default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[trini: Rework FSP_USE_UPD portion]
Signed-off-by: Tom Rini <trini@konsulko.com>
kconfig: Add API kconfig file 2017-02-08T20:56:31+00:00 Emmanuel Vadot manu@bidouilliste.com 2017-01-31T11:17:04+00:00 4db98d3d92827e38d0853f0c1932d3db7d757622 Add kconfig file to enable API support Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
Add kconfig file to enable API support

Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>