u-boot-toradex.git/configs/iot2050_defconfig, branch master

configs: Resync with savedefconfig

2026-05-11T18:26:03+00:00

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2026-01-06T15:13:29+00:00

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2025-10-27T15:57:45+00:00

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini

treewide: Remove empty board_init() function from all boards

2025-07-24T19:30:19+00:00

Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.

This cleanup was made semi-automatically using these scripts: [1].

No functional change, but the binary size for the modified boards is
reduced a bit.

[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init

Signed-off-by: Sam Protsenko 
Tested-by: Adam Ford  #imx8mm_beacon
Tested-by: Bryan Brattlof 
Acked-by: Peng Fan   #NXP boards

configs: Resync with savedefconfig

2025-07-07T20:15:18+00:00

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini

env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANT

2025-06-20T18:15:08+00:00

Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.

Signed-off-by: Marek Vasut

configs: set SPL_TEXT_BASE by default for k3 platforms

2025-04-24T14:23:07+00:00

SPL_TEXT_BASE is used as the load address for the main domain SPL on k3
platforms.

Since the config value is the same for every board, this patch sets the
value 0x80080000 as default for all 64-bit ARCH_K3, 0x43c00000 as
default for the R5 cores and deletes the instances of SPL_TEXT_BASE in
individual defconfigs.

Signed-off-by: Anshul Dalal 
Reviewed-by: Tom Rini

Merge patch series "Introduce K3 remoteproc driver for M4 subsystem"

2025-02-14T19:39:10+00:00

Judith Mendez  says:

Some K3 devices like am62x and am64x have a M4 processor in the MCU
voltage domain. This patch series introduces remoteproc M4 driver which
will be used to load firmware into and start the M4 remote core.

This series also adds support for R5F cores on am64x SoCs in patch 2 and
sets up environment to load FW in remote cores in patch 3,4,5.

This patch series also enables remoteproc drivers by default as per what
remoteproc sybsystem is supported per SoC, thus all remoteproc options
are now deleted in configs/* since they are no longer required.

This patch series was tested on am64x EVM, am62x SK, am62ax SK,
am62px SK boards.

Any additional tested by's are welcome since I was not able to
test any additional boards.

Tested by running the following commands in u-boot prompt:

=> setenv dorprocboot 1
=> run boot_rprocs

Link: https://lore.kernel.org/r/20250210202944.1071931-1-jm@ti.com

configs: Resync with savedefconfig

2025-01-24T22:35:58+00:00

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2024-11-12T21:00:36+00:00

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini