This is similar to the VSC8574 according to the Linux commit that adds support for it [1]. This was tested on an HX1000 board with SGMII (PIC64-HX SoC which has a GEM MAC). [1]: https://lore.kernel.org/all/dfabe39a52efcd2cfff9358f271b8673143503b8.1480497966.git.neill.whillans@codethink.co.uk/ Signed-off-by: Charles Perry <charles.perry@microchip.com> Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
The ADIN1200 chip is register compatible with the ADIN1300, but only supports 10/100 Mbit. Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Replace the proprietary airoha,pnswap-rx / airoha,pnswap-tx boolean device tree properties with the standard rx-polarity and tx-polarity properties defined in phy-common-props.yaml. Backward compatibility is maintained by reading the legacy boolean properties first and passing them as the default_pol argument to phy_get_rx/tx_polarity(). If the standard properties are absent the legacy values are used transparently, so existing device trees remain functional without modification. Link: https://git.kernel.org/linus/66d8a334b57e64e43810623b3d88f0ce9745270b Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Since Linux commit c360eb0c3ccb ("dt-bindings: net: ethernet-controller:
Add informative text about RGMII delays"), the interpretation of RGMII
delays has changed. Prior to the commit, the RGMII Variant among "rgmii",
"rgmii-id", "rgmii-rxid" and "rgmii-txid" clearly specified whether it is
the MAC or the PHY that "should" add the delay. However, post that commit,
the RGMII Variant only specifies whether or not there is a delay on the
PCB traces between the MAC and the PHY, leaving it open as to who adds the
delay.
Hence, instead of enforcing the existence of the device-tree properties
"ti,rx-internal-delay" and "ti,tx-internal-delay", default to a delay
of 2ns, while continuing to override this delay with the aforementioned
properties, if they exist in the device-tree.
This is in line with the Linux driver implementation updated by commit
6bf78849371d ("net: phy: dp83867: use 2ns delay if not specified in DTB").
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n, when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so let's simplify the various checks across the codebase. SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so the proper symbol is still defined in SPL whenever needed. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the option to NET_LEGACY. This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL. The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is using the legacy networking app so this seems fine to do. This also has the benefit of removing potential confusion on NET being a specific networking stack instead of "any" network stack. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Current timeout for PHY out of reset is 50ms which is too short. Increase it to 2s to align with kernel. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
After a warm reboot, the PHY is left in power-down state
(BMCR_PDOWN set) causing auto-negotiation to timeout when
running the dhcp command.
Fix this by calling phy_reset() in dp83867_config() which
brings the PHY to a known clean state. The existing
DP83867_SW_RESTART is removed as it is redundant after phy_reset().
Fixes: 721aed79126b ("net: phy: Add support for Texas Instruments DP83867")
Signed-off-by: Pranav Tilak <pranav.vinaytilak@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
- Add a call to phy_reset() in ksz9031_config() to ensure the PHY is properly reset during initialization. - This clears the power-down bit and ensures the PHY recovers correctly after Linux reboot. Tested on Agilex5 hardware with KSZ90X1 PHY. Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>