The DM_REGULATOR_QCOM_USB_VBUS functionality can only work with DM_PMIC
enabled as well, so express this dependency in Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
Link: https://patch.msgid.link/20260323195302.2363577-1-trini@konsulko.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

Symbol CONFIG_SPL_DM_REGULATOR_FAN53555 is selected by
SPL_DM_PMIC_FAN53555 and used in a Makefile. But the
symbol definition is missing.

Add the missing configuration symbol.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add a new regulator driver for MT6359P and similar PMIC chips.

The MT6359P is a eco version for MT6359 regulator. For the MT8391
platform, we use the MT6359P (MT6365) as the main PMIC. The MT6359 and
MT6359P have different register maps. Therefore, on the MT8391 platform,
we only provide support for the MT6359P. If support for the MT6359 PMIC
it can be added later.

Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add a driver for the power regulators of the MediaTek MT6357 PMIC chip.

Signed-off-by: Julien Masson <jmasson@baylibre.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

The devm alloc functions that we have may follow the Linux kernel model
where allocations are (almost always) automatically free()'d. However,
quite often we don't enable, in full U-Boot, the tracking and free()'ing
functionality. This in turn leads to memory leaks because the driver
author expects that since the functions have the same name as in the
Linux Kernel they have the same behavior. In turn we then get
functionally correct commits such as commit 00e1fed93c8c ("firmware:
ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource") that manually
add these calls. Rather than manually tracking allocations and
implementing free()s, rework things so that we follow expectations by
enabling the DEVRES functionality (outside of xPL phases).

This turns DEVRES from a prompted symbol to a symbol that must be
select'd, and we now remove our non-managed alloc/free functions from
outside of xPL builds.

Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

gpio-regulator uses dm gpio API, so it depends on SPL_DM_GPIO, not
SPL_GPIO.

Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

SPL_DM_PWM option simply doesn't exist. Moreover, drivers/pwm is only
included by drivers/Makefile for non-xPL stages so making
SPL_REGULATOR_PWM properly build for SPL/xPL is more involved than just
adding an SPL_DM_PWM option.

Reading the original commit (ddc824f89aa8 ("power: regulator: Allow PWM
regulator to be omitted from SPL."), the intent seemingly wasn't to
allow building support in XPL but rather to allow removing it which is
done by using $(PHASE_) ($(SPL_) at that time) in the Makefile. If
anyone needs that, let them figure out what they need to do without
misleading potential users of this symbol by simply removing it.

Fixes: 2a846e04c622 ("power: regulator: Correct dependencies on SPL_REGULATOR_PWM")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

The PWM regulator driver is a uclass driver, thus requiring DM_PWM to be
enabled to be actually usable (and with the appropriate PWM controller
driver enabled as well, but that we cannot enforce easily), so let's add
this missing dependency.

Fixes: 1a01695615f9 ("power: regulator: add pwm regulator")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

In order to enable and build with SPL_REGULATOR_PWM we need to have both
SPL_DM_REGULATOR and SPL_DM_PWM enabled. Build-wise, we can have SPL
have PWM regulator support without enabling it in U-Boot itself so drop
that dependency.

Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>