Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Highlight that NET really is the legacy networking stack by renaming the option to NET_LEGACY. This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL. The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is using the legacy networking app so this seems fine to do. This also has the benefit of removing potential confusion on NET being a specific networking stack instead of "any" network stack. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Change the SUPPORTS_FW_LOADER option to be enabled by default.
This is a dependency-only option intended to be used like:
depends on SUPPORTS_FW_LOADER
Instead of having to always remember to do both:
depends on CMDLINE
depends on ENV_SUPPORT
In order to actually work though, the option has to be enabled.
Reported-by: Weijie Gao <weijie.gao@mediatek.com>
Closes: https://lore.kernel.org/u-boot/20260410015311.4066075-1-weijie.gao@mediatek.com/
Fixes: 4ed440e6be80 ("fw_loader: Introduce SUPPORTS_FW_LOADER symbol")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
This symbol should not be enabled by the user directly but rather selected when implemented in a given platform. This converts all of the current users of this feature and hides the symbol. Signed-off-by: Tom Rini <trini@konsulko.com>
In order to build this code, outside of QEMU systems which instead have provided tables that we use, we must select ACPIGEN as well. Signed-off-by: Tom Rini <trini@konsulko.com>
The implementation of FW_LOADER requires CMDLINE to be enabled, and expressses this. In order to not have to have every users also depends on CMDLINE introduce SUPPORTS_FW_LOADER. This depends on CMDLINE and ENV_SUPPORT and then we have all users depends on SUPPORTS_FW_LOADER. Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, we have a copy of the LZMA SDK code, version 9.20, with small updates. The original import of the LZMA SDK included a script to update the library. This is no longer possible, due to important local changes, so remove it. We also remove a number of extra text files that should be unchanged from upstream, but provide no direct value to the project. Instead, have the help text for LZMA note that this comes from the LZMA SDK. Next, we move our code up to the current release, 25.01. There are a number of new header files, and some performance improvements made to the code, at the cost of between 2 to 3 kilobytes in binary size. As there is now a Kconfig option to disable this and retain similar speed to what we have currently, the default option is to make this trade-off. Our changes to the code around calling schedule() to avoid the watchdog being triggered are kept. We add __UBOOT__ guards in two places to prevent conflict with our own usage of these words on MIPS. Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, our LZMA library has an option for optimizing for size, rather than speed. It is a minimal savings today, and has not been worth enabling. As this will change in the near future, add options now to allow disabling it in full U-Boot or in SPL, and enable these on gardena-smart-gateway-mt7688 which is very close to the size limit today. Reviewed-by: Stefan Roese <stefan.roese@mailbox.org> Signed-off-by: Tom Rini <trini@konsulko.com>
The following functions are provided: Count leading zero bits * int __clzsi2 (unsigned int a) * int __clzdi2 (unsigned long a) * int __clzti2 (unsigned long long a) Count trailing zero bits * int __ctzsi2 (unsigned int a) * int __ctzdi2 (unsigned long a) * int __ctzti2 (unsigned long long a) Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Implement SM3_256 Hash algorithm, based on
linux commit f83a4f2a4d8c: ("Merge tag 'erofs-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs")
Therefore add the needed parts from linux.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>