When creating the RSDT and the XSDT table they contain no entries.
The table size therefore must equal the header size.
Without this change a NULL deference has been observed in
acpi_find_table() when running `ut dm` on sandbox64_defconfig
executed via `sudo ./u-boot -D`.
Fixes: 94ba15a3f13f ("x86: Move base tables to a writer function")
Fixes: 7e586f69070d ("acpi: Put table-setup code in its own function")
Fixes: ab5efd576c4e ("x86: acpi: Adjust order in acpi_table.c")
Fixes: 867bcb63e79f ("x86: Generate a valid ACPI table")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update dm_test_acpi_ctx_and_base_tables() in test/dm/acpi.c to expect
sizeof(struct acpi_table_header) for the initial table length (instead
of sizeof(*rsdt) / sizeof(*xsdt)), and to compute the checksum over
header->length bytes rather than the full struct size:
Signed-off-by: Simon Glass <sjg@chromium.org>
test_fit.py declares a local make_fname closure that is byte-identical to fit_util.make_fname. Drop the local copy and call the shared helper at all seven call sites so there is one definition to maintain. No behavioural change. Both implementations return os.path.join(ubman.config.build_dir, basename). Signed-off-by: Aristo Chen <aristo.chen@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Add sandbox DM unit tests for the PHY common properties library and the corresponding device tree test nodes to arch/sandbox/dts/test.dts. Also enable CONFIG_PHY_COMMON_PROPS in configs/sandbox_defconfig so the tests are built and run in the sandbox environment. The test file covers rx/tx polarity lookups for all relevant cases: - missing property (defaults to PHY_POL_NORMAL) - single value without names array (applies to all modes) - count mismatch between values and names arrays (-EINVAL) - name found by exact match - name not found with no "default" fallback (-EINVAL) - name not found with a "default" entry (uses fallback value) - unsupported polarity value (-EOPNOTSUPP) Ported from Linux KUnit test: linux/drivers/phy/phy-common-props-test.c Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Add a unit test to verify that the SPI word length configuration is correctly handled by the SPI uclass and successfully passed down to the sandbox driver. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Simon Glass <simon.glass@canonical.com>
Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7c2 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n, when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so let's simplify the various checks across the codebase. SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so the proper symbol is still defined in SPL whenever needed. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the option to NET_LEGACY. This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL. The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is using the legacy networking app so this seems fine to do. This also has the benefit of removing potential confusion on NET being a specific networking stack instead of "any" network stack. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says: This series reworks the FIT test (test_fit.py) to make it easier to maintain and extend. It fixes the buildconfigspec so the test actually runs on sandbox, avoids unnecessary U-Boot restarts, renames the main test for easier selection, adds a missing-kernel check, fixes Python warnings, converts the test to use a class, splits into separate test functions, and adds Sphinx documentation. Link: https://lore.kernel.org/r/20260413130007.1987326-1-sjg@chromium.org
Create an 'fsetup' fixture which sets up files and parameters, and a prepare() helper which builds a FIT with given parameter overrides. Update check_equal() and check_not_equal() to look up filenames from a params dict by key, reducing the number of local variables needed. Split the single test_fit_operations() into individual test functions so that each appears separately in the results. Signed-off-by: Simon Glass <sjg@chromium.org>
Move this test over to use a class instead of a function, so we can easily split it into some related tests. Move the TODO so it is part of the comment for the class. Tidy up some function comments while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>