usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>

4 files changed, 223 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index 78708e22ac..851c3b911e 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -124,6 +124,10 @@ struct anadig_reg {
 #define CCM_CCSR_PLL1_PFD_CLK_SEL_MASK		(0x7 << 16)
 #define CCM_CCSR_PLL1_PFD_CLK_SEL(v)		(((v) & 0x7) << 16)
 
+#define CCM_CCSR_PLL3_PFD4_EN           (1 << 31)
+#define CCM_CCSR_PLL3_PFD3_EN           (1 << 30)
+#define CCM_CCSR_PLL3_PFD2_EN           (1 << 29)
+#define CCM_CCSR_PLL3_PFD1_EN           (1 << 28)
 #define CCM_CCSR_PLL2_PFD4_EN			(1 << 15)
 #define CCM_CCSR_PLL2_PFD3_EN			(1 << 14)
 #define CCM_CCSR_PLL2_PFD2_EN			(1 << 13)
@@ -189,6 +193,7 @@ struct anadig_reg {
 #define CCM_REG_CTRL_MASK			0xffffffff
 #define CCM_CCGR0_UART0_CTRL_MASK               (0x3 << 14)
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR1_USBC0_CTRL_MASK       (0x3 << 8)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
 #define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
@@ -207,14 +212,23 @@ struct anadig_reg {
 #define CCM_CCGR6_OCOTP_CTRL_MASK		(0x3 << 10)
 #define CCM_CCGR6_DDRMC_CTRL_MASK		(0x3 << 28)
 #define CCM_CCGR7_SDHC1_CTRL_MASK		(0x3 << 4)
+#define CCM_CCGR7_USBC1_CTRL_MASK       (0x3 << 8)
 #define CCM_CCGR9_FEC0_CTRL_MASK		0x3
 #define CCM_CCGR9_FEC1_CTRL_MASK		(0x3 << 2)
 #define CCM_CCGR10_NFC_CTRL_MASK		0x3
 
+#define ANADIG_PLL7_CTRL_BYPASS         (1 << 16)
+#define ANADIG_PLL7_CTRL_ENABLE         (1 << 13)
+#define ANADIG_PLL7_CTRL_POWERDOWN      (1 << 12)
+#define ANADIG_PLL7_CTRL_DIV_SELECT     (1 << 1)
 #define ANADIG_PLL5_CTRL_BYPASS                 (1 << 16)
 #define ANADIG_PLL5_CTRL_ENABLE                 (1 << 13)
 #define ANADIG_PLL5_CTRL_POWERDOWN              (1 << 12)
 #define ANADIG_PLL5_CTRL_DIV_SELECT		1
+#define ANADIG_PLL3_CTRL_BYPASS         (1 << 16)
+#define ANADIG_PLL3_CTRL_ENABLE         (1 << 13)
+#define ANADIG_PLL3_CTRL_POWERDOWN      (1 << 12)
+#define ANADIG_PLL3_CTRL_DIV_SELECT     (1 << 1)
 #define ANADIG_PLL2_CTRL_ENABLE			(1 << 13)
 #define ANADIG_PLL2_CTRL_POWERDOWN		(1 << 12)
 #define ANADIG_PLL2_CTRL_DIV_SELECT		1
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index a5908ca102..26057feee9 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -52,6 +52,7 @@
 #define SAI2_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00031000)
 #define SAI3_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00032000)
 #define CRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00033000)
+#define USBC0_BASE_ADDR     (AIPS0_BASE_ADDR + 0x00034000)
 #define PDB_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00036000)
 #define PIT_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00037000)
 #define FTM0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00038000)
@@ -65,6 +66,8 @@
 #define QSPI0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00044000)
 #define IOMUXC_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00048000)
 #define ANADIG_BASE_ADDR	(AIPS0_BASE_ADDR + 0x00050000)
+#define USB_PHY0_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050800)
+#define USB_PHY1_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050C00)
 #define SCSC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00052000)
 #define ASRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00060000)
 #define SPDIF_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00061000)
@@ -84,6 +87,7 @@
 #define DDR_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0002E000)
 #define ESDHC0_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00031000)
 #define ESDHC1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00032000)
+#define USBC1_BASE_ADDR     (AIPS1_BASE_ADDR + 0x00034000)
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
 #define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
 #define NFC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00060000)
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index eb6f34b53c..4bd9321160 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o
 obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
+obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
 obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
 obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
 
diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
new file mode 100644
index 0000000000..4aa3b9ccae
--- /dev/null
+++ b/drivers/usb/host/ehci-vf.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com>
+ * Copyright (C) 2015 Toradex AG
+ *
+ * Based on ehci-mx6 driver
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <errno.h>
+#include <linux/compiler.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <usb/ehci-fsl.h>
+
+#include "ehci.h"
+
+#define USB_NC_REG_OFFSET				0x00000800
+#define USBCx_CTRL_OFFSET				0x00000000
+#define USBCx_PHY_CTRL_OFFSET			0x00000018
+
+#define USBPHY_CTRL						0x00000030
+#define USBPHY_CTRL_SET					0x00000034
+#define USBPHY_CTRL_CLR					0x00000038
+#define USBPHY_CTRL_TOG					0x0000003c
+
+#define USBPHY_PWD						0x00000000
+#define USBPHY_TX						0x00000010
+#define USBPHY_RX						0x00000020
+#define USBPHY_DEBUG					0x00000050
+#define USBPHY_CTRL_SFTRST				0x80000000
+#define USBPHY_CTRL_CLKGATE				0x40000000
+#define USBPHY_CTRL_ENUTMILEVEL3		0x00008000
+#define USBPHY_CTRL_ENUTMILEVEL2		0x00004000
+#define USBPHY_CTRL_OTG_ID				0x08000000
+
+#define ANADIG_PLL_CTRL_BYPASS			0x00010000
+#define ANADIG_PLL_CTRL_ENABLE			0x00002000
+#define ANADIG_PLL_CTRL_POWER			0x00001000
+#define ANADIG_PLL_CTRL_EN_USB_CLKS		0x00000040
+
+#define UCTRL_OVER_CUR_POL	(1 << 8) /* OTG Polarity of Overcurrent */
+#define UCTRL_OVER_CUR_DIS	(1 << 7) /* Disable OTG Overcurrent Detection */
+
+/* USBCMD */
+#define UCMD_RUN_STOP		(1 << 0) /* controller run/stop */
+#define UCMD_RESET			(1 << 1) /* controller reset */
+
+static const unsigned phy_bases[] = {
+	USB_PHY0_BASE_ADDR,
+	USB_PHY1_BASE_ADDR,
+};
+
+static const unsigned nc_reg_bases[] = {
+	USBC0_BASE_ADDR,
+	USBC1_BASE_ADDR,
+};
+
+static void usb_internal_phy_clock_gate(int index)
+{
+	u32 reg;
+	void __iomem *phy_reg;
+
+	phy_reg = (void __iomem *)phy_bases[index];
+	reg = __raw_readl(phy_reg + USBPHY_CTRL);
+	reg &= ~USBPHY_CTRL_CLKGATE;
+	__raw_writel(reg, phy_reg + USBPHY_CTRL_SET);
+}
+
+static void usb_power_config(int index)
+{
+	struct anadig_reg __iomem *anadig =
+		(struct anadig_reg __iomem *)ANADIG_BASE_ADDR;
+	void __iomem *pll_ctrl;
+	u32 reg;
+
+	switch (index) {
+	case 0:
+		pll_ctrl = &anadig->pll3_ctrl;
+		break;
+	case 1:
+		pll_ctrl = &anadig->pll7_ctrl;
+		break;
+	default:
+		return;
+	}
+
+	reg = __raw_readl(pll_ctrl);
+	reg &= ~ANADIG_PLL_CTRL_BYPASS;
+	__raw_writel(reg, pll_ctrl);
+
+	reg = __raw_readl(pll_ctrl);
+	reg |= ANADIG_PLL_CTRL_ENABLE | ANADIG_PLL_CTRL_POWER
+			| ANADIG_PLL_CTRL_EN_USB_CLKS;
+	__raw_writel(reg, pll_ctrl);
+}
+
+static void usb_phy_enable(int index, struct usb_ehci *ehci)
+{
+	void __iomem *phy_reg;
+	void __iomem *phy_ctrl;
+	void __iomem *usb_cmd;
+	u32 val;
+
+	phy_reg = (void __iomem *)phy_bases[index];
+	phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+	usb_cmd = (void __iomem *)&ehci->usbcmd;
+
+	/* Stop then Reset */
+	val = __raw_readl(usb_cmd);
+	val &= ~UCMD_RUN_STOP;
+	__raw_writel(val, usb_cmd);
+	while (__raw_readl(usb_cmd) & UCMD_RUN_STOP)
+		;
+
+	val = __raw_readl(usb_cmd);
+	val |= UCMD_RESET;
+	__raw_writel(val, usb_cmd);
+	while (__raw_readl(usb_cmd) & UCMD_RESET)
+		;
+
+	/* Reset USBPHY module */
+	val = __raw_readl(phy_ctrl);
+	val |= USBPHY_CTRL_SFTRST;
+	__raw_writel(val, phy_ctrl);
+	udelay(10);
+
+	/* Remove CLKGATE and SFTRST */
+	val = __raw_readl(phy_ctrl);
+	val &= ~(USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
+	__raw_writel(val, phy_ctrl);
+	udelay(10);
+
+	/* Power up the PHY */
+	__raw_writel(0, phy_reg + USBPHY_PWD);
+	/* enable FS/LS device */
+	val = __raw_readl(phy_ctrl);
+	val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
+	__raw_writel(val, phy_ctrl);
+}
+
+static void usb_oc_config(int index)
+{
+	void __iomem *ctrl;
+	u32 val;
+
+	ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET +
+						USBCx_CTRL_OFFSET);
+
+	val = __raw_readl(ctrl);
+	val |= UCTRL_OVER_CUR_POL;
+	__raw_writel(val, ctrl);
+
+	val = __raw_readl(ctrl);
+	val |= UCTRL_OVER_CUR_DIS;
+	__raw_writel(val, ctrl);
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+	struct usb_ehci *ehci;
+
+	if (index >= ARRAY_SIZE(nc_reg_bases))
+		return -EINVAL;
+
+	if (init == USB_INIT_DEVICE && index == 1)
+		return -ENODEV;
+	if (init == USB_INIT_HOST && index == 0)
+		return -ENODEV;
+
+	ehci = (struct usb_ehci *)nc_reg_bases[index];
+
+	usb_power_config(index);
+	usb_oc_config(index);
+	usb_internal_phy_clock_gate(index);
+	usb_phy_enable(index, ehci);
+
+	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+	*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
+			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+
+	if (init == USB_INIT_DEVICE) {
+		setbits_le32(&ehci->usbmode, CM_DEVICE);
+		__raw_writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
+		setbits_le32(&ehci->portsc, USB_EN);
+	} else if (init == USB_INIT_HOST) {
+		setbits_le32(&ehci->usbmode, CM_HOST);
+		__raw_writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
+		setbits_le32(&ehci->portsc, USB_EN);
+	}
+
+	return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+	return 0;
+}