at91: Introduction of at91sam9g45 SOC.

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>

20 files changed, 1221 insertions, 22 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 705bac5a77b..5a8f12c236f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -547,6 +547,9 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
 
 	meesc		ARM926EJS (AT91SAM9263 SoC)
 
+Sedji Gaouaou<sedji.gaouaou@atmel.com>
+	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
+
 Marius Gröger <mag@sysgo.de>
 
 	impa7		ARM720T (EP7211)
diff --git a/MAKEALL b/MAKEALL
index 41f144553e0..03ef5b45cdf 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -578,24 +578,25 @@ LIST_ARM_CORTEX_A8="		\
 ## AT91 Systems
 #########################################################################
 
-LIST_at91="		\
-	afeb9260	\
-	at91cap9adk	\
-	at91rm9200dk	\
-	at91rm9200ek	\
-	at91sam9260ek	\
-	at91sam9261ek	\
-	at91sam9263ek	\
-	at91sam9g20ek	\
-	at91sam9rlek	\
-	cmc_pu2		\
-	csb637		\
-	kb9202		\
-	meesc		\
-	mp2usb		\
-	m501sk		\
-	pm9261		\
-	pm9263		\
+LIST_at91="			\
+	afeb9260		\
+	at91cap9adk		\
+	at91rm9200dk		\
+	at91rm9200ek		\
+	at91sam9260ek		\
+	at91sam9261ek		\
+	at91sam9263ek		\
+	at91sam9m10g45ek	\
+	at91sam9g20ek		\
+	at91sam9rlek		\
+	cmc_pu2			\
+	csb637			\
+	kb9202			\
+	meesc			\
+	mp2usb			\
+	m501sk			\
+	pm9261			\
+	pm9263			\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 2a064402495..55a9648d781 100644
--- a/Makefile
+++ b/Makefile
@@ -2800,6 +2800,31 @@ meesc_config	:	unconfig
 pm9261_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
 
+at91sam9m10g45ek_nandflash_config \
+at91sam9m10g45ek_dataflash_config \
+at91sam9m10g45ek_dataflash_cs0_config \
+at91sam9m10g45ek_config \
+at91sam9g45ekes_nandflash_config \
+at91sam9g45ekes_dataflash_config \
+at91sam9g45ekes_dataflash_cs0_config \
+at91sam9g45ekes_config	:	unconfig
+	@mkdir -p $(obj)include
+		@if [ "$(findstring 9m10,$@)" ] ; then \
+		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... 9M10G45 Variant" ; \
+	else \
+		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
+	fi;
+
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+
 pm9263_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile
new file mode 100644
index 00000000000..4caf1e416dc
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9m10g45ek.o
+COBJS-y += led.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
new file mode 100644
index 00000000000..45a14a95f26
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -0,0 +1,334 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9m10g45ek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(3));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9m10g45ek_macb_hw_init(void)
+{
+	unsigned long rstc;
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA15) => PHY normal mode (not Test mode)
+	 * 	ERX0 (PA12) => PHY ADDR0
+	 *	ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA12) |
+	       pin_to_mask(AT91_PIN_PA13),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+	rstc = at91_sys_read(AT91_RSTC_MR);
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (rstc) |
+				     AT91_RSTC_URSTEN);
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA12) |
+	       pin_to_mask(AT91_PIN_PA13),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_LCD
+
+vidinfo_t panel_info = {
+	vl_col:		480,
+	vl_row:		272,
+	vl_clk:		9000000,
+	vl_sync:	ATMEL_LCDC_INVLINE_NORMAL |
+			ATMEL_LCDC_INVFRAME_NORMAL,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	45,
+	vl_left_margin:	1,
+	vl_right_margin:1,
+	vl_vsync_len:	1,
+	vl_upper_margin:40,
+	vl_lower_margin:1,
+	mmio:		AT91SAM9G45_LCDC_BASE,
+};
+
+
+void lcd_enable(void)
+{
+	at91_set_A_periph(AT91_PIN_PE6, 1);	/* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* power down */
+}
+
+static void at91sam9m10g45ek_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
+
+	gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9M10G45EK-Board */
+#ifdef CONFIG_AT91SAM9M10G45EK
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;
+#elif defined CONFIG_AT91SAM9G45EKES
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
+#endif
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9m10g45ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_ATMEL_SPI
+	at91_spi0_hw_init(1 << 4);
+#endif
+
+#ifdef CONFIG_MACB
+	at91sam9m10g45ek_macb_hw_init();
+#endif
+
+#ifdef CONFIG_LCD
+	at91sam9m10g45ek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	switch(slave->cs) {
+		case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 0);
+			break;
+		case 0:
+		default:
+			at91_set_gpio_output(AT91_PIN_PB3, 0);
+			break;
+	}
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	switch(slave->cs) {
+		case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 1);
+			break;
+		case 0:
+		default:
+			at91_set_gpio_output(AT91_PIN_PB3, 1);
+		break;
+	}
+}
+#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk
new file mode 100644
index 00000000000..7fe9d03138d
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x73f00000
diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c
new file mode 100644
index 00000000000..ff59a2d5d3b
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/led.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+
+	at91_set_gpio_output(CONFIG_RED_LED, 1);
+	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+
+	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+}
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index 3da89f4fba9..69051c1cd59 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -31,6 +31,8 @@ COBJS-$(CONFIG_AT91SAM9G20)	+= at91sam9260_devices.o
 COBJS-$(CONFIG_AT91SAM9261)	+= at91sam9261_devices.o
 COBJS-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
 COBJS-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
+COBJS-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
 COBJS-$(CONFIG_AT91_LED)	+= led.o
 COBJS-y += clock.o
 COBJS-y += cpu.o
diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
new file mode 100644
index 00000000000..98d90f2514b
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);	/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PD6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD7, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);	/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);;
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+	at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+	at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_A_periph(AT91_PIN_PB3, 0);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_B_periph(AT91_PIN_PB18, 0);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_B_periph(AT91_PIN_PB19, 0);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_B_periph(AT91_PIN_PD27, 0);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_gpio_output(AT91_PIN_PB3, 0);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_gpio_output(AT91_PIN_PB18, 0);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_gpio_output(AT91_PIN_PB19, 0);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_gpio_output(AT91_PIN_PD27, 0);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_A_periph(AT91_PIN_PB17, 0);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_B_periph(AT91_PIN_PD28, 0);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_A_periph(AT91_PIN_PD18, 0);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_A_periph(AT91_PIN_PD19, 0);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_gpio_output(AT91_PIN_PB17, 0);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_gpio_output(AT91_PIN_PD28, 0);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_gpio_output(AT91_PIN_PD18, 0);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_gpio_output(AT91_PIN_PD19, 0);
+	}
+
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+#ifndef CONFIG_RMII
+	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+#endif
+}
+#endif
diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c
index 9f03468b6c9..574f48824c0 100644
--- a/cpu/arm926ejs/at91/clock.c
+++ b/cpu/arm926ejs/at91/clock.c
@@ -183,15 +183,23 @@ int at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = at91_sys_read(AT91_PMC_MCKR);
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	/* plla divisor by 2 */
+	plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+#endif
 	freq = mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_CSS);
+
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));			/* prescale */
 #if defined(CONFIG_AT91RM9200)
 	mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #elif defined(CONFIG_AT91SAM9G20)
 	mck_rate_hz = (mckr & AT91_PMC_MDIV) ?
-		freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+		freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;		/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 	if (mckr & AT91_PMC_PDIV)
-		freq /= 2;		/* processor clock division */
+		freq /= 2;						/* processor clock division */
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	mck_rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+		freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #else
 	mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #endif
diff --git a/doc/README.at91 b/doc/README.at91
index 4a2c56bd9ed..269d0729a0e 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -75,6 +75,26 @@ Environment variables
 
 
 ------------------------------------------------------------------------------
+AT91SAM9M10G45EK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J12)
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 0 (dataflash card)
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9m10g45ek) :
+		make at91sam9m10g45ek_config			- use data flash (spi cs0) (default)
+		make at91sam9m10g45ek_nandflash_config		- use nand flash
+		make at91sam9m10g45ek_dataflash_cs0_config	- use data flash (spi cs0)
+
+
+------------------------------------------------------------------------------
 AT91SAM9RLEK
 ------------------------------------------------------------------------------
 
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 6de0a04410a..c1843539f99 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -447,14 +447,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 	/* choose RMII or MII mode. This depends on the board */
 #ifdef CONFIG_RMII
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
 #endif
 #else
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index a82955c1bf2..9fe94c7e4cc 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -89,6 +89,7 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define			AT91SAM9_PMC_MDIV_6		(3 << 8)
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)
diff --git a/include/asm-arm/arch-at91/at91sam9_matrix.h b/include/asm-arm/arch-at91/at91sam9_matrix.h
index 913f3747908..6d97189d275 100644
--- a/include/asm-arm/arch-at91/at91sam9_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9_matrix.h
@@ -21,6 +21,8 @@
 #include <asm/arch/at91sam9rl_matrix.h>
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9_matrix.h>
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45_matrix.h>
 #else
 #error "Unsupported AT91SAM9/CAP9 processor"
 #endif
diff --git a/include/asm-arm/arch-at91/at91sam9g45.h b/include/asm-arm/arch-at91/at91sam9g45.h
new file mode 100644
index 00000000000..0feed9c28b3
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9g45.h
@@ -0,0 +1,139 @@
+/*
+ * Chip-specific header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_HCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+/*
+ * Cpu Name
+ */
+#define AT91_CPU_NAME	"AT91SAM9G45"
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9g45_matrix.h b/include/asm-arm/arch-at91/at91sam9g45_matrix.h
new file mode 100644
index 00000000000..1620e1baffc
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/include/asm-arm/arch-at91/clk.h b/include/asm-arm/arch-at91/clk.h
index 6aaf82eae23..f642dd99585 100644
--- a/include/asm-arm/arch-at91/clk.h
+++ b/include/asm-arm/arch-at91/clk.h
@@ -49,6 +49,11 @@ static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
 	return get_mck_clk_rate();
 }
 
+static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
+{
+	return get_mck_clk_rate();
+}
+
 static inline unsigned long get_twi_clk_rate(unsigned int dev_id)
 {
 	return get_mck_clk_rate();
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 870410645ff..c42709efcc8 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -37,6 +37,12 @@
 #include <asm/arch/at91sam9rl.h>
 #define AT91_BASE_SPI	AT91SAM9RL_BASE_SPI
 #define AT91_ID_UHP	AT91SAM9RL_ID_UHP
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45.h>
+#define AT91_BASE_EMAC  AT91SAM9G45_BASE_EMAC
+#define AT91_BASE_SPI   AT91SAM9G45_BASE_SPI0
+#define AT91_ID_UHP     AT91SAM9G45_ID_UHPHS
+#define AT91_PMC_UHP    AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9.h>
 #define AT91_BASE_SPI	AT91CAP9_BASE_SPI0
diff --git a/include/asm-arm/arch-at91/memory-map.h b/include/asm-arm/arch-at91/memory-map.h
index 8015dad6a9c..f605f37fd2c 100644
--- a/include/asm-arm/arch-at91/memory-map.h
+++ b/include/asm-arm/arch-at91/memory-map.h
@@ -30,5 +30,6 @@
 #define USART1_BASE AT91_USART1
 #define USART2_BASE AT91_USART2
 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
+#define SPI0_BASE	AT91_BASE_SPI
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
new file mode 100644
index 00000000000..572c45bfb0f
--- /dev/null
+++ b/include/configs/at91sam9m10g45ek.h
@@ -0,0 +1,225 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		12000000	/* from 12 MHz crystal */
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#ifdef CONFIG_AT91SAM9M10G45EK
+#define CONFIG_AT91SAM9M10G45	1	/* It's an Atmel AT91SAM9M10G45 SoC*/
+#else
+#define CONFIG_AT91SAM9G45	1	/* It's an Atmel AT91SAM9G45 SoC*/
+#endif
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_RGB565		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+/* board specific(not enough SRAM) */
+#define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x70000000
+#define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */
+
+/* DataFlash */
+#ifdef CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH		1
+#define CONFIG_SPI_FLASH_ATMEL		1
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS	1
+#endif
+
+/* NOR flash, if populated */
+#ifndef CONFIG_CMD_NAND
+#define CONFIG_SYS_NO_FLASH		1
+#else
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define PHYS_FLASH_1			0x10000000
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS			1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#define CONFIG_RMII			1
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00700000	/* AT91SAM9G45_UHP_OHCI_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(0xC0000000 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(0xC0000000 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 " \
+				"mtdparts=at91_nand:-(root) "\
+				"rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock5 " \
+				"mtdparts=at91_nand:128k(bootstrap)ro, \
+				256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
+				2M(linux),-(root) " \
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif