Initial revision

124 files changed, 48888 insertions, 0 deletions

diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c
new file mode 100644
index 00000000000..78c1838b792
--- /dev/null
+++ b/board/RPXlite/flash.c
@@ -0,0 +1,524 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-Boot port on RPXlite board
+ *
+ * Some of flash control words are modified. (from 2x16bit device
+ * to 4x8bit device)
+ * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
+ * are not tested.
+ *
+ * (?) Does an RPXLite board which
+ * 	does not use AM29LV800 flash memory exist ?
+ *	I don't know...
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+/*	volatile immap_t     *immap  = (immap_t *)CFG_IMMR; */
+/*	volatile memctl8xx_t *memctl = &immap->im_memctl; */
+	unsigned long size_b0 ;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+/*
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE_DEBUG, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+*/
+	/* Remap FLASH according to real size */
+/*%%%
+	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+%%%*/
+	/* Re-do sizing to get full correct info */
+
+	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      &flash_info[0]);
+#endif
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00010000;
+		info->start[2] = base + 0x00018000;
+		info->start[3] = base + 0x00020000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + ((i-3) * 0x00040000) ;
+		}
+	} else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00010000;
+		info->start[i--] = base + info->size - 0x00018000;
+		info->start[i--] = base + info->size - 0x00020000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00040000;
+		}
+	}
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0xAAA] = 0x00AA00AA ;
+	addr[0x555] = 0x00550055 ;
+	addr[0xAAA] = 0x00900090 ;
+
+	value = addr[0] ;
+
+	switch (value & 0x00FF00FF) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[2] ;		/* device ID		*/
+
+	switch (value & 0x00FF00FF) {
+	case (AMD_ID_LV400T & 0x00FF00FF):
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (AMD_ID_LV400B & 0x00FF00FF):
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (AMD_ID_LV800T & 0x00FF00FF):
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (AMD_ID_LV800B & 0x00FF00FF):
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00400000;	/*%%% Size doubled by yooth */
+		break;				/* => 4 MB		*/
+
+	case (AMD_ID_LV160T & 0x00FF00FF):
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+
+	case (AMD_ID_LV160B & 0x00FF00FF):
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+#if 0	/* enable when device IDs are available */
+	case AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+
+	case AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+#endif
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+	/*%%% sector start address modified */
+	/* set up sector start address table */
+	if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00010000;
+		info->start[2] = base + 0x00018000;
+		info->start[3] = base + 0x00020000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + ((i-3) * 0x00040000) ;
+		}
+	} else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00010000;
+		info->start[i--] = base + info->size - 0x00018000;
+		info->start[i--] = base + info->size - 0x00020000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00040000;
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr = (volatile unsigned long *)(info->start[i]);
+		info->protect[i] = addr[4] & 1 ;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (volatile unsigned long *)info->start[0];
+
+		*addr = 0xF0F0F0F0;	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	vu_long *addr = (vu_long*)(info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+	addr[0xAAA] = 0x80808080;
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (vu_long *)(info->start[sect]) ;
+			addr[0] = 0x30303030 ;
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (vu_long *)(info->start[l_sect]);
+	while ((addr[0] & 0x80808080) != 0x80808080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (vu_long *)info->start[0];
+	addr[0] = 0xF0F0F0F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)(info->start[0]);
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+	addr[0xAAA] = 0xA0A0A0A0;
+
+	*((vu_long *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c
new file mode 100644
index 00000000000..941ea65edb9
--- /dev/null
+++ b/board/cogent/lcd.c
@@ -0,0 +1,231 @@
+/* most of this is taken from the file */
+/* hal/powerpc/cogent/current/src/hal_diag.c in the */
+/* Cygnus eCos source. Here is the copyright notice: */
+/* */
+/*============================================================================= */
+/* */
+/*      hal_diag.c */
+/* */
+/*      HAL diagnostic output code */
+/* */
+/*============================================================================= */
+/*####COPYRIGHTBEGIN#### */
+/* */
+/* ------------------------------------------- */
+/* The contents of this file are subject to the Cygnus eCos Public License */
+/* Version 1.0 (the "License"); you may not use this file except in */
+/* compliance with the License.  You may obtain a copy of the License at */
+/* http://sourceware.cygnus.com/ecos */
+/* */
+/* Software distributed under the License is distributed on an "AS IS" */
+/* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the */
+/* License for the specific language governing rights and limitations under */
+/* the License. */
+/* */
+/* The Original Code is eCos - Embedded Cygnus Operating System, released */
+/* September 30, 1998. */
+/* */
+/* The Initial Developer of the Original Code is Cygnus.  Portions created */
+/* by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved. */
+/* ------------------------------------------- */
+/* */
+/*####COPYRIGHTEND#### */
+/*============================================================================= */
+/*#####DESCRIPTIONBEGIN#### */
+/* */
+/* Author(s):    nickg, jskov */
+/* Contributors: nickg, jskov */
+/* Date:         1999-03-23 */
+/* Purpose:      HAL diagnostic output */
+/* Description:  Implementations of HAL diagnostic output support. */
+/* */
+/*####DESCRIPTIONEND#### */
+/* */
+/*============================================================================= */
+
+/*----------------------------------------------------------------------------- */
+/* Cogent board specific LCD code */
+
+#include <common.h>
+#include <stdarg.h>
+#include <board/cogent/lcd.h>
+
+static char lines[2][LCD_LINE_LENGTH+1];
+static int curline;
+static int linepos;
+static int heartbeat_active;
+/* make the next two strings exactly LCD_LINE_LENGTH (16) chars long */
+/* pad to the right with spaces if necessary */
+static char init_line0[LCD_LINE_LENGTH+1] = "U-Boot Cogent  ";
+static char init_line1[LCD_LINE_LENGTH+1] = "mjj, 11 Aug 2000";
+
+static inline unsigned char
+lcd_read_status(cma_mb_lcd *clp)
+{
+    /* read the Busy Status Register */
+    return (cma_mb_reg_read(&clp->lcd_bsr));
+}
+
+static inline void
+lcd_wait_not_busy(cma_mb_lcd *clp)
+{
+    /*
+     * wait for not busy
+     * Note: It seems that the LCD isn't quite ready to process commands
+     * when it clears the BUSY flag. Reading the status address an extra
+     * time seems to give it enough breathing room.
+     */
+
+    while (lcd_read_status(clp) & LCD_STAT_BUSY)
+	;
+
+    (void)lcd_read_status(clp);
+}
+
+static inline void
+lcd_write_command(cma_mb_lcd *clp, unsigned char cmd)
+{
+    lcd_wait_not_busy(clp);
+
+    /* write the Command Register */
+    cma_mb_reg_write(&clp->lcd_cmd, cmd);
+}
+
+static inline void
+lcd_write_data(cma_mb_lcd *clp, unsigned char data)
+{
+    lcd_wait_not_busy(clp);
+
+    /* write the Current Character Register */
+    cma_mb_reg_write(&clp->lcd_ccr, data);
+}
+
+static inline void
+lcd_dis(int addr, char *string)
+{
+    cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
+    int pos, linelen;
+
+    linelen = LCD_LINE_LENGTH;
+    if (heartbeat_active && addr == LCD_LINE0)
+	linelen--;
+
+    lcd_write_command(clp, LCD_CMD_ADD + addr);
+    for (pos = 0; *string != '\0' && pos < linelen; pos++)
+        lcd_write_data(clp, *string++);
+}
+
+void
+lcd_init(void)
+{
+    cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
+    int i;
+
+    /* configure the lcd for 8 bits/char, 2 lines and 5x7 dot matrix */
+    lcd_write_command(clp, LCD_CMD_MODE);
+
+    /* turn the LCD display on */
+    lcd_write_command(clp, LCD_CMD_DON);
+
+    curline = 0;
+    linepos = 0;
+
+    for (i = 0; i < LCD_LINE_LENGTH; i++) {
+        lines[0][i] = init_line0[i];
+	lines[1][i] = init_line1[i];
+    }
+
+    lines[0][LCD_LINE_LENGTH] = lines[1][LCD_LINE_LENGTH] = 0;
+
+    lcd_dis(LCD_LINE0, lines[0]);
+    lcd_dis(LCD_LINE1, lines[1]);
+
+    printf("HD44780 2 line x %d char display\n", LCD_LINE_LENGTH);
+}
+
+void
+lcd_write_char(const char c)
+{
+    int i, linelen;
+
+    /* ignore CR */
+    if (c == '\r')
+	return;
+
+    linelen = LCD_LINE_LENGTH;
+    if (heartbeat_active && curline == 0)
+	linelen--;
+
+    if (c == '\n') {
+        lcd_dis(LCD_LINE0, &lines[curline^1][0]);
+        lcd_dis(LCD_LINE1, &lines[curline][0]);
+
+        /* Do a line feed */
+        curline ^= 1;
+	linelen = LCD_LINE_LENGTH;
+	if (heartbeat_active && curline == 0)
+	    linelen--;
+        linepos = 0;
+
+        for (i = 0; i < linelen; i++)
+            lines[curline][i] = ' ';
+
+        return;
+    }
+
+    /* Only allow to be output if there is room on the LCD line */
+    if (linepos < linelen)
+        lines[curline][linepos++] = c;
+}
+
+void
+lcd_flush(void)
+{
+    lcd_dis(LCD_LINE1, &lines[curline][0]);
+}
+
+void
+lcd_write_string(const char *s)
+{
+    char *p;
+
+    for (p = (char *)s; *p != '\0'; p++)
+	lcd_write_char(*p);
+}
+
+void
+lcd_printf(const char *fmt, ...)
+{
+    va_list args;
+    char buf[CFG_PBSIZE];
+
+    va_start(args, fmt);
+    (void)vsprintf(buf, fmt, args);
+    va_end(args);
+
+    lcd_write_string(buf);
+}
+
+void
+lcd_heartbeat(void)
+{
+    cma_mb_lcd *clp = (cma_mb_lcd *)CMA_MB_LCD_BASE;
+#if 0
+    static char rotchars[] = { '|', '/', '-', '\\' };
+#else
+    /* HD44780 Rom Code A00 has no backslash */
+    static char rotchars[] = { '|', '/', '-', '\315' };
+#endif
+    static int rotator_index = 0;
+
+    heartbeat_active = 1;
+
+    /* write the address */
+    lcd_write_command(clp, LCD_CMD_ADD + LCD_LINE0 + (LCD_LINE_LENGTH - 1));
+
+    /* write the next char in the sequence */
+    lcd_write_data(clp, rotchars[rotator_index]);
+
+    if (++rotator_index >= (sizeof rotchars / sizeof rotchars[0]))
+	rotator_index = 0;
+}
diff --git a/board/cogent/lcd.h b/board/cogent/lcd.h
new file mode 100644
index 00000000000..1056eea473d
--- /dev/null
+++ b/board/cogent/lcd.h
@@ -0,0 +1,84 @@
+/* most of this is taken from the file */
+/* hal/powerpc/cogent/current/src/hal_diag.c in the */
+/* Cygnus eCos source. Here is the copyright notice: */
+/* */
+/*============================================================================= */
+/* */
+/*      hal_diag.c */
+/* */
+/*      HAL diagnostic output code */
+/* */
+/*============================================================================= */
+/*####COPYRIGHTBEGIN#### */
+/* */
+/* ------------------------------------------- */
+/* The contents of this file are subject to the Cygnus eCos Public License */
+/* Version 1.0 (the "License"); you may not use this file except in */
+/* compliance with the License.  You may obtain a copy of the License at */
+/* http://sourceware.cygnus.com/ecos */
+/* */
+/* Software distributed under the License is distributed on an "AS IS" */
+/* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the */
+/* License for the specific language governing rights and limitations under */
+/* the License. */
+/* */
+/* The Original Code is eCos - Embedded Cygnus Operating System, released */
+/* September 30, 1998. */
+/* */
+/* The Initial Developer of the Original Code is Cygnus.  Portions created */
+/* by Cygnus are Copyright (C) 1998,1999 Cygnus Solutions.  All Rights Reserved. */
+/* ------------------------------------------- */
+/* */
+/*####COPYRIGHTEND#### */
+/*============================================================================= */
+/*#####DESCRIPTIONBEGIN#### */
+/* */
+/* Author(s):    nickg, jskov */
+/* Contributors: nickg, jskov */
+/* Date:         1999-03-23 */
+/* Purpose:      HAL diagnostic output */
+/* Description:  Implementations of HAL diagnostic output support. */
+/* */
+/*####DESCRIPTIONEND#### */
+/* */
+/*============================================================================= */
+
+/* FEMA 162B 16 character x 2 line LCD */
+
+/* status register bit definitions */
+#define LCD_STAT_BUSY	0x80	/* 1 = display busy */
+#define LCD_STAT_ADD	0x7F	/* bits 0-6 return current display address */
+
+/* command register definitions */
+#define LCD_CMD_RST	0x01	/* clear entire display and reset display addr */
+#define LCD_CMD_HOME	0x02	/* reset display address and reset any shifting */
+#define LCD_CMD_ECL	0x04	/* move cursor left one pos on next data write */
+#define LCD_CMD_ESL	0x05	/* shift display left one pos on next data write */
+#define LCD_CMD_ECR	0x06	/* move cursor right one pos on next data write */
+#define LCD_CMD_ESR	0x07	/* shift disp right one pos on next data write */
+#define LCD_CMD_DOFF	0x08	/* display off, cursor off, blinking off */
+#define LCD_CMD_BL	0x09	/* blink character at current cursor position */
+#define LCD_CMD_CUR	0x0A	/* enable cursor on */
+#define LCD_CMD_DON	0x0C	/* turn display on */
+#define LCD_CMD_CL	0x10	/* move cursor left one position */
+#define LCD_CMD_SL	0x14	/* shift display left one position */
+#define LCD_CMD_CR	0x18	/* move cursor right one position */
+#define LCD_CMD_SR	0x1C	/* shift display right one position */
+#define LCD_CMD_MODE	0x38	/* sets 8 bits, 2 lines, 5x7 characters */
+#define LCD_CMD_ACG	0x40	/* bits 0-5 sets character generator address */
+#define LCD_CMD_ADD	0x80	/* bits 0-6 sets display data addr to line 1 + */
+
+/* LCD status values */
+#define LCD_OK		0x00
+#define LCD_ERR 	0x01
+
+#define LCD_LINE0	0x00
+#define LCD_LINE1	0x40
+
+#define LCD_LINE_LENGTH	16
+
+extern void lcd_init(void);
+extern void lcd_write_char(const char);
+extern void lcd_flush(void);
+extern void lcd_write_string(const char *);
+extern void lcd_printf(const char *, ...);
diff --git a/board/cray/L1/flash.c b/board/cray/L1/flash.c
new file mode 100644
index 00000000000..6d66905d9a0
--- /dev/null
+++ b/board/cray/L1/flash.c
@@ -0,0 +1,471 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+/*
+ * Modified July 20, 2001
+ * Strip down to support ONLY the AMD29F032B.
+ * Dave Updegraff - Cray, Inc. dave@cray.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/* The flash chip we use... */
+#define AMD_ID_F032B	0x41	/* 29F032B ID  32 Mbit,64 64Kx8 sectors */
+#define FLASH_AM320B    0x0009
+
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1)
+	  {
+	    /* Setup offsets */
+	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+#if 0
+	    /* Monitor protection ON by default */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				FLASH_BASE0_PRELIM,
+				FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+				&flash_info[0]);
+#endif
+	    size_b1 = 0 ;
+	    flash_info[0].size = size_b0;
+	  }
+
+	return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+        int k;
+        int size;
+        int erased;
+        volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM320B:printf ("AM29F032B (32 Mbit 64x64KB uniform sectors)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+                /*
+                 * Check if whole sector is erased
+                 */
+                if (i != (info->sector_count-1))
+                  size = info->start[i+1] - info->start[i];
+                else
+                  size = info->start[0] + info->size - info->start[i];
+                erased = 1;
+                flash = (volatile unsigned long *)info->start[i];
+                size = size >> 2;        /* divide by 4 for longword access */
+                for (k=0; k<size; k++)
+                  {
+                    if (*flash++ != 0xffffffff)
+                      {
+                        erased = 0;
+                        break;
+                      }
+                  }
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   "
+		);
+	}
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	FLASH_WORD_SIZE value;
+	ulong base = (ulong)addr;
+        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+
+	value = addr2[0];
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr2[1];			/* device ID		*/
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_ID_F032B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 64;
+		info->size = 0x0400000; /* => 4 MB */
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+        info->protect[i] = addr2[2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr2 = (FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+	start = get_timer (0);
+    last  = start;
+    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+        if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+            printf ("Timeout\n");
+            return -1;
+        }
+        /* show that we're waiting */
+        if ((now - last) > 1000) {  /* every second */
+            putc ('.');
+            last = now;
+        }
+    }
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+		    addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+		    printf("Erasing sector %p\n", addr2);
+
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+		    l_sect = sect;
+		    /*
+		     * Wait for each sector to complete, it's more
+		     * reliable.  According to AMD Spec, you must
+		     * issue all erase commands within a specified
+		     * timeout.  This has been seen to fail, especially
+		     * if printf()s are included (for debug)!!
+		     */
+		    wait_for_DQ7(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
+        volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+        volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+	ulong start;
+	int flag;
+        int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *)dest) &
+             (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+        for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+          {
+            addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+            addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+            addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0;
+
+            dest2[i] = data2[i];
+
+            /* re-enable interrupts if necessary */
+            if (flag)
+              enable_interrupts();
+
+            /* data polling for D7 */
+            start = get_timer (0);
+            while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
+                   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+              if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+                return (1);
+              }
+            }
+          }
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S
new file mode 100644
index 00000000000..acc52051f9b
--- /dev/null
+++ b/board/cray/L1/init.S
@@ -0,0 +1,147 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/*       This source code has been made available to you by IBM on an AS-IS */
+/*       basis.  Anyone receiving this source is licensed under IBM */
+/*       copyrights to use it in any way he or she deems fit, including */
+/*       copying it, modifying it, compiling it, and redistributing it either */
+/*       with or without modifications.  No license under IBM patents or */
+/*       patent applications is to be implied by the copyright license. */
+/* */
+/*       Any user of this software should understand that IBM cannot provide */
+/*       technical support for this software and will not be responsible for */
+/*       any consequences resulting from the use of this software. */
+/* */
+/*       Any person who transfers this source code or any derivative work */
+/*       must include the IBM copyright notice, this paragraph, and the */
+/*       preceding two paragraphs in the transferred software. */
+/* */
+/*       COPYRIGHT   I B M   CORPORATION 1995 */
+/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function:     ext_bus_cntlr_init */
+/* Description:  Initializes the External Bus Controller for the external */
+/*		peripherals. IMPORTANT: For pass1 this code must run from */
+/*		cache since you can not reliably change a peripheral banks */
+/*		timing register (pbxap) while running code from that bank. */
+/*		For ex., since we are running from ROM on bank 0, we can NOT */
+/*		execute the code that modifies bank 0 timings from ROM, so */
+/*		we run it from cache. */
+/*	Bank 0 - Flash and SRAM */
+/*	Bank 1 - NVRAM/RTC */
+/*	Bank 2 - Keyboard/Mouse controller */
+/*	Bank 3 - IR controller */
+/*	Bank 4 - not used */
+/*	Bank 5 - not used */
+/*	Bank 6 - not used */
+/*	Bank 7 - FPGA registers */
+/*-----------------------------------------------------------------------------#include <config.h> */
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+/* CRAY - L1: only nominally a 'walnut', since ext.Bus.Cntlr is all empty */
+/*	except for #1 which we use for DMA'ing to IOCA-like things, so the */
+/*	control registers to set that up are determined by what we've */
+/*	empirically discovered work there. */
+
+     	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+        mflr    r4                      /* save link register */
+        bl      ..getAddr
+..getAddr:
+        mflr    r3                      /* get address of ..getAddr */
+        mtlr    r4                      /* restore link register */
+        addi    r4,0,14                 /* set ctr to 10; used to prefetch */
+        mtctr   r4                      /* 10 cache lines to fit this function */
+                                        /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+        icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+        addi    r3,r3,32		/* move to next cache line */
+        bdnz    ..ebcloop               /* continue for 10 cache lines */
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure all accesses to ROM are complete before changing */
+	    /* bank 0 timings. 200usec should be enough. */
+        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+        /*------------------------------------------------------------------- */
+	addis	r3,0,0x0
+        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+        mtctr   r3
+..spinlp:
+        bdnz    ..spinlp                /* spin loop */
+
+
+        /*---------------------------------------------------------------------- */
+        /* Peripheral Bank 0 (Flash) initialization */
+        /*---------------------------------------------------------------------- */
+		/* 0x7F8FFE80 slowest boot */
+        addi    r4,0,pb0ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,0x9B01
+        ori     r4,r4,0x5480
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb0cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,0xFFC5           /* BAS=0xFFC,BS=0x4(4MB),BU=0x3(R/W), */
+        ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
+        mtdcr   ebccfgd,r4
+
+        blr
+
+        /*---------------------------------------------------------------------- */
+        /* Peripheral Bank 1 (NVRAM/RTC) initialization */
+		/* CRAY:the L1 has NOT this bank, it is tied to SV2/IOCA/etc/ instead */
+		/* and we do DMA on it.  The ConfigurationRegister part is threfore */
+		/* almost arbitrary, except that our linux driver needs to know the */
+		/* address, but it can query, it.. */
+		/* */
+		/* The AccessParameter is CRITICAL, */
+		/* thouch, since it needs to agree with the electrical timings on the */
+		/* IOCA parallel interface.  That value is: 0x0185,4380 */
+		/* BurstModeEnable			BME=0 */
+		/* TransferWait				TWT=3 */
+		/* ChipSelectOnTiming		CSN=1 */
+		/* OutputEnableOnTimimg		OEN=1 */
+		/* WriteByteEnableOnTiming	WBN=1 */
+		/* WriteByteEnableOffTiming	WBF=0 */
+		/* TransferHold				TH=1 */
+		/* ReadyEnable				RE=1 */
+		/* SampleOnReady			SOR=1 */
+		/* ByteEnableMode			BEM=0 */
+		/* ParityEnable				PEN=0 */
+		/* all reserved bits=0 */
+        /*---------------------------------------------------------------------- */
+        /*---------------------------------------------------------------------- */
+        addi    r4,0,pb1ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,0x0185		/* hiword */
+        ori     r4,r4,0x4380	/* loword */
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb1cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,0xF001           /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W), */
+        ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
+        mtdcr   ebccfgd,r4
+
+        blr
+
+/*----------------------------------------------------------------------------- */
+/* Function:	sdram_init */
+/* Description:	Configures SDRAM memory banks. */
+/*				NOTE: for CrayL1 we have ECC memory, so enable it. */
+/*....now done in C in L1.c:init_sdram for readability. */
+/*----------------------------------------------------------------------------- */
+        .globl  sdram_init
+
+sdram_init:
+ blr
diff --git a/board/dnp1110/config.mk b/board/dnp1110/config.mk
new file mode 100644
index 00000000000..72ba595f1ac
--- /dev/null
+++ b/board/dnp1110/config.mk
@@ -0,0 +1,17 @@
+#
+# DNP/1110 board with SA1100 cpu
+#
+# http://www.dilnetpc.com
+#
+
+#
+# DILNETPC has 1 banks of 32 MB DRAM
+#
+# c000'0000
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to c1f0'0000, the upper 1 MB of the first (only) bank
+#
+
+TEXT_BASE = 0xc1f00000
diff --git a/board/dnp1110/memsetup.S b/board/dnp1110/memsetup.S
new file mode 100644
index 00000000000..bebd697a83b
--- /dev/null
+++ b/board/dnp1110/memsetup.S
@@ -0,0 +1,96 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+MEM_BASE:	.long	0xa0000000
+MEM_START:	.long	0xc0000000
+
+#define	MDCNFG	0x00
+#define MDCAS0	0x04
+#define MDCAS1	0x08
+#define MDCAS2	0x0c
+#define MSC0	0x10
+#define MSC1	0x14
+#define MECR	0x18
+
+mdcas0:		.long	0xc71c703f
+mdcas1:		.long	0xffc71c71
+mdcas2:		.long	0xffffffff
+/* mdcnfg:		.long   0x0bb2bcbf */
+mdcnfg:		.long	0x0334b22f	@ alt
+/* mcs0:		.long   0xfff8fff8 */
+msc0:		.long	0xad8c4888	@ alt
+mecr:		.long	0x00060006
+/* mecr:		.long	0x994a994a	@ alt */
+
+/* setting up the memory */
+
+.globl memsetup
+memsetup:
+	ldr	r0, MEM_BASE
+
+	/* Setup the flash memory */
+	ldr	r1, msc0
+	str	r1, [r0, #MSC0]
+
+	/* Set up the DRAM */
+
+	/* MDCAS0 */
+	ldr	r1, mdcas0
+	str	r1, [r0, #MDCAS0]
+
+	/* MDCAS1 */
+	ldr	r1, mdcas1
+	str	r1, [r0, #MDCAS1]
+
+	/* MDCAS2 */
+	ldr	r1, mdcas2
+	str	r1, [r0, #MDCAS2]
+
+	/* MDCNFG */
+	ldr	r1, mdcnfg
+	str	r1, [r0, #MDCNFG]
+
+	/* Set up PCMCIA space */
+	ldr	r1, mecr
+	str	r1, [r0, #MECR]
+
+	/* Load something to activate bank */
+	ldr	r1, MEM_START
+
+.rept	8
+	ldr	r0, [r1]
+.endr
+
+	/* everything is fine now */
+	mov	pc, lr
+
diff --git a/board/ebony/flash.c b/board/ebony/flash.c
new file mode 100644
index 00000000000..6efd566e896
--- /dev/null
+++ b/board/ebony/flash.c
@@ -0,0 +1,736 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define     BOOT_SMALL_FLASH        32              /* 00100000 */
+#define     FLASH_ONBD_N            2               /* 00000010 */
+#define     FLASH_SRAM_SEL          1               /* 00000001 */
+
+#define     BOOT_SMALL_FLASH_VAL    4
+#define     FLASH_ONBD_N_VAL        2
+#define     FLASH_SRAM_SEL_VAL      1
+
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+static  unsigned    long    flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+        {0xffc00000, 0xffe00000, 0xff880000},   /* 0:000: configuraton 3 */
+        {0xffc00000, 0xffe00000, 0xff800000},   /* 1:001: configuraton 4 */
+        {0xffc00000, 0xffe00000, 0x00000000},   /* 2:010: configuraton 7 */
+        {0xffc00000, 0xffe00000, 0x00000000},   /* 3:011: configuraton 8 */
+        {0xff800000, 0xffa00000, 0xfff80000},   /* 4:100: configuraton 1 */
+        {0xff800000, 0xffa00000, 0xfff00000},   /* 5:101: configuraton 2 */
+        {0xffc00000, 0xffe00000, 0x00000000},   /* 6:110: configuraton 5 */
+        {0xffc00000, 0xffe00000, 0x00000000}    /* 7:111: configuraton 6 */
+};
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#if 0
+static void flash_get_offsets (ulong base, flash_info_t *info);
+#endif
+
+#ifdef CONFIG_ADCIOP
+#define ADDR0           0x0aa9
+#define ADDR1           0x0556
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_CPCI405
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_WALNUT405
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_EBONY
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void) {
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned char * fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char switch_status;
+	unsigned short index = 0;
+	int i;
+
+
+	/* read FPGA base register FPGA_REG0 */
+	switch_status = *fpga_base;
+
+	/* check the bitmap of switch status */
+	if (switch_status & BOOT_SMALL_FLASH) {
+		index += BOOT_SMALL_FLASH_VAL;
+	}
+	if (switch_status & FLASH_ONBD_N) {
+		index += FLASH_ONBD_N_VAL;
+	}
+	if (switch_status & FLASH_SRAM_SEL) {
+		index += FLASH_SRAM_SEL_VAL;
+	}
+
+    DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size(
+			(vu_long *)flash_addr_table[index][i], &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+				i, size_b[i], size_b[i]<<20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+#if 0
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id  == FLASH_AM040) ||
+	    (info->flash_id  == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type	*/
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] = base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type		*/
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+        int k;
+        int size;
+        int erased;
+        volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMD016:	printf ("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+		break;
+	default:		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+                /*
+                 * Check if whole sector is erased
+                 */
+                if (i != (info->sector_count-1))
+			size = info->start[i+1] - info->start[i];
+                else
+			size = info->start[0] + info->size - info->start[i];
+                erased = 1;
+                flash = (volatile unsigned long *)info->start[i];
+                size = size >> 2;        /* divide by 4 for longword access */
+                for (k=0; k<size; k++)
+		{
+			if (*flash++ != 0xffffffff)
+			{
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+			printf (" %08lX%s%s",
+				info->start[i],
+				erased ? " E" : "  ",
+				info->protect[i] ? "RO " : "   "
+				);
+			}
+		printf ("\n");
+		return;
+	}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+	static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+		{
+			short i;
+			FLASH_WORD_SIZE value;
+			ulong base = (ulong)addr;
+			volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+            DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
+
+			/* Write auto select command: read Manufacturer ID */
+            udelay(10000);
+			addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+            udelay(1000);
+			addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+            udelay(1000);
+			addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+            udelay(1000);
+
+#ifdef CONFIG_ADCIOP
+			value = addr2[2];
+#else
+			value = addr2[0];
+#endif
+
+			DEBUGF("FLASH MANUFACT: %x\n", value);
+
+			switch (value) {
+			case (FLASH_WORD_SIZE)AMD_MANUFACT:
+				info->flash_id = FLASH_MAN_AMD;
+				break;
+			case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+				info->flash_id = FLASH_MAN_FUJ;
+				break;
+			case (FLASH_WORD_SIZE)SST_MANUFACT:
+				info->flash_id = FLASH_MAN_SST;
+				break;
+			default:
+				info->flash_id = FLASH_UNKNOWN;
+				info->sector_count = 0;
+				info->size = 0;
+				return (0);			/* no or unknown flash	*/
+			}
+
+#ifdef CONFIG_ADCIOP
+			value = addr2[0];			/* device ID		*/
+			debug ("\ndev_code=%x\n", value);
+#else
+			value = addr2[1];			/* device ID		*/
+#endif
+
+			DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+			switch (value) {
+			case (FLASH_WORD_SIZE)AMD_ID_F016D:
+				info->flash_id += FLASH_AMD016;
+				info->sector_count = 32;
+				info->size = 0x00200000;
+				break;				/* => 2 MB		*/
+			case (FLASH_WORD_SIZE)AMD_ID_F040B:
+				info->flash_id += FLASH_AM040;
+				info->sector_count = 8;
+				info->size = 0x0080000; /* => 512 ko */
+				break;
+			case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+				info->flash_id += FLASH_AM400T;
+				info->sector_count = 11;
+				info->size = 0x00080000;
+				break;				/* => 0.5 MB		*/
+
+			case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+				info->flash_id += FLASH_AM400B;
+				info->sector_count = 11;
+				info->size = 0x00080000;
+				break;				/* => 0.5 MB		*/
+
+			case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+				info->flash_id += FLASH_AM800T;
+				info->sector_count = 19;
+				info->size = 0x00100000;
+				break;				/* => 1 MB		*/
+
+			case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+				info->flash_id += FLASH_AM800B;
+				info->sector_count = 19;
+				info->size = 0x00100000;
+				break;				/* => 1 MB		*/
+
+			case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+				info->flash_id += FLASH_AM160T;
+				info->sector_count = 35;
+				info->size = 0x00200000;
+				break;				/* => 2 MB		*/
+
+			case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+				info->flash_id += FLASH_AM160B;
+				info->sector_count = 35;
+				info->size = 0x00200000;
+				break;				/* => 2 MB		*/
+#if 0	/* enable when device IDs are available */
+			case (FLASH_WORD_SIZE)AMD_ID_LV320T:
+				info->flash_id += FLASH_AM320T;
+				info->sector_count = 67;
+				info->size = 0x00400000;
+				break;				/* => 4 MB		*/
+
+			case (FLASH_WORD_SIZE)AMD_ID_LV320B:
+				info->flash_id += FLASH_AM320B;
+				info->sector_count = 67;
+				info->size = 0x00400000;
+				break;				/* => 4 MB		*/
+#endif
+			case (FLASH_WORD_SIZE)SST_ID_xF800A:
+				info->flash_id += FLASH_SST800A;
+				info->sector_count = 16;
+				info->size = 0x00100000;
+				break;				/* => 1 MB		*/
+
+			case (FLASH_WORD_SIZE)SST_ID_xF160A:
+				info->flash_id += FLASH_SST160A;
+				info->sector_count = 32;
+				info->size = 0x00200000;
+				break;				/* => 2 MB		*/
+
+			default:
+				info->flash_id = FLASH_UNKNOWN;
+				return (0);			/* => no or unknown flash */
+
+			}
+
+			/* set up sector start address table */
+			if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+			    (info->flash_id  == FLASH_AM040) ||
+			    (info->flash_id  == FLASH_AMD016)) {
+				for (i = 0; i < info->sector_count; i++)
+					info->start[i] = base + (i * 0x00010000);
+			} else {
+				if (info->flash_id & FLASH_BTYPE) {
+					/* set sector offsets for bottom boot block type	*/
+					info->start[0] = base + 0x00000000;
+					info->start[1] = base + 0x00004000;
+					info->start[2] = base + 0x00006000;
+					info->start[3] = base + 0x00008000;
+					for (i = 4; i < info->sector_count; i++) {
+						info->start[i] = base + (i * 0x00010000) - 0x00030000;
+					}
+				} else {
+					/* set sector offsets for top boot block type		*/
+					i = info->sector_count - 1;
+					info->start[i--] = base + info->size - 0x00004000;
+					info->start[i--] = base + info->size - 0x00006000;
+					info->start[i--] = base + info->size - 0x00008000;
+					for (; i >= 0; i--) {
+						info->start[i] = base + i * 0x00010000;
+					}
+				}
+			}
+
+			/* check for protected sectors */
+			for (i = 0; i < info->sector_count; i++) {
+				/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+				/* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+				addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+				info->protect[i] = addr2[4] & 1;
+#else
+				addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+				if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+					info->protect[i] = 0;
+				else
+					info->protect[i] = addr2[2] & 1;
+#endif
+			}
+
+			/*
+			 * Prevent writes to uninitialized FLASH.
+			 */
+			if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+				addr2 = (volatile unsigned char *)info->start[0];
+				addr2[ADDR0] = 0xAA;
+				addr2[ADDR1] = 0x55;
+				addr2[ADDR0] = 0xF0;  /* reset bank */
+#else
+				addr2 = (FLASH_WORD_SIZE *)info->start[0];
+				*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+#endif
+#else /* test-only */
+				addr2 = (FLASH_WORD_SIZE *)info->start[0];
+				*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+#endif /* test-only */
+			}
+
+			return (info->size);
+		}
+
+	int wait_for_DQ7(flash_info_t *info, int sect)
+		{
+			ulong start, now, last;
+			volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+			start = get_timer (0);
+			last  = start;
+			while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+				if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					return -1;
+				}
+				/* show that we're waiting */
+				if ((now - last) > 1000) {  /* every second */
+					putc ('.');
+					last = now;
+				}
+			}
+			return 0;
+		}
+
+/*-----------------------------------------------------------------------
+ */
+
+	int	flash_erase (flash_info_t *info, int s_first, int s_last)
+		{
+			volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+			volatile FLASH_WORD_SIZE *addr2;
+			int flag, prot, sect, l_sect;
+			int i;
+
+			if ((s_first < 0) || (s_first > s_last)) {
+				if (info->flash_id == FLASH_UNKNOWN) {
+					printf ("- missing\n");
+				} else {
+					printf ("- no sectors to erase\n");
+				}
+				return 1;
+			}
+
+			if (info->flash_id == FLASH_UNKNOWN) {
+				printf ("Can't erase unknown flash type - aborted\n");
+				return 1;
+			}
+
+			prot = 0;
+			for (sect=s_first; sect<=s_last; ++sect) {
+				if (info->protect[sect]) {
+					prot++;
+				}
+			}
+
+			if (prot) {
+				printf ("- Warning: %d protected sectors will not be erased!\n",
+					prot);
+			} else {
+				printf ("\n");
+			}
+
+			l_sect = -1;
+
+			/* Disable interrupts which might cause a timeout here */
+			flag = disable_interrupts();
+
+			/* Start erase on unprotected sectors */
+			for (sect = s_first; sect<=s_last; sect++) {
+				if (info->protect[sect] == 0) {	/* not protected */
+					addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+					printf("Erasing sector %p\n", addr2);
+
+					if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+						addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+						addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
+						for (i=0; i<50; i++)
+							udelay(1000);  /* wait 1 ms */
+					} else {
+						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+						addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+						addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+					}
+					l_sect = sect;
+					/*
+					 * Wait for each sector to complete, it's more
+					 * reliable.  According to AMD Spec, you must
+					 * issue all erase commands within a specified
+					 * timeout.  This has been seen to fail, especially
+					 * if printf()s are included (for debug)!!
+					 */
+					wait_for_DQ7(info, sect);
+				}
+			}
+
+			/* re-enable interrupts if necessary */
+			if (flag)
+				enable_interrupts();
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+
+#if 0
+			/*
+			 * We wait for the last triggered sector
+			 */
+			if (l_sect < 0)
+				goto DONE;
+			wait_for_DQ7(info, l_sect);
+
+		DONE:
+#endif
+			/* reset to read mode */
+			addr = (FLASH_WORD_SIZE *)info->start[0];
+			addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+
+			printf (" done\n");
+			return 0;
+		}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+	int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+		{
+			ulong cp, wp, data;
+			int i, l, rc;
+
+			wp = (addr & ~3);	/* get lower word aligned address */
+
+			/*
+			 * handle unaligned start bytes
+			 */
+			if ((l = addr - wp) != 0) {
+				data = 0;
+				for (i=0, cp=wp; i<l; ++i, ++cp) {
+					data = (data << 8) | (*(uchar *)cp);
+				}
+				for (; i<4 && cnt>0; ++i) {
+					data = (data << 8) | *src++;
+					--cnt;
+					++cp;
+				}
+				for (; cnt==0 && i<4; ++i, ++cp) {
+					data = (data << 8) | (*(uchar *)cp);
+				}
+
+				if ((rc = write_word(info, wp, data)) != 0) {
+					return (rc);
+				}
+				wp += 4;
+			}
+
+			/*
+			 * handle word aligned part
+			 */
+			while (cnt >= 4) {
+				data = 0;
+				for (i=0; i<4; ++i) {
+					data = (data << 8) | *src++;
+				}
+				if ((rc = write_word(info, wp, data)) != 0) {
+					return (rc);
+				}
+				wp  += 4;
+				cnt -= 4;
+			}
+
+			if (cnt == 0) {
+				return (0);
+			}
+
+			/*
+			 * handle unaligned tail bytes
+			 */
+			data = 0;
+			for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+				data = (data << 8) | *src++;
+				--cnt;
+			}
+			for (; i<4; ++i, ++cp) {
+				data = (data << 8) | (*(uchar *)cp);
+			}
+
+			return (write_word(info, wp, data));
+		}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+	static int write_word (flash_info_t * info, ulong dest, ulong data)
+		{
+			volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+			volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+			volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+			ulong start;
+			int i;
+
+			/* Check if Flash is (sufficiently) erased */
+			if ((*((volatile FLASH_WORD_SIZE *) dest) &
+			     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+				return (2);
+			}
+
+			for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+				int flag;
+
+				/* Disable interrupts which might cause a timeout here */
+				flag = disable_interrupts ();
+
+				addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+				dest2[i] = data2[i];
+
+				/* re-enable interrupts if necessary */
+				if (flag)
+					enable_interrupts ();
+
+				/* data polling for D7 */
+				start = get_timer (0);
+				while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+				       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+					if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+						return (1);
+					}
+				}
+			}
+
+			return (0);
+		}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/eltec/mhpc/config.mk b/board/eltec/mhpc/config.mk
new file mode 100644
index 00000000000..607ebbcb1f5
--- /dev/null
+++ b/board/eltec/mhpc/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MHPC boards
+#
+
+TEXT_BASE = 0xfe000000
+/*TEXT_BASE  = 0x00200000 */
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/board/eric/flash.c b/board/eric/flash.c
new file mode 100644
index 00000000000..c3f6e15bc54
--- /dev/null
+++ b/board/eric/flash.c
@@ -0,0 +1,1130 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+
+#ifdef CFG_FLASH_16BIT
+#define FLASH_WORD_SIZE	unsigned short
+#define	FLASH_ID_MASK	0xFFFF
+#else
+#define FLASH_WORD_SIZE unsigned long
+#define	FLASH_ID_MASK	0xFFFFFFFF
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+/* stolen from esteem192e/flash.c */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
+
+#ifndef CFG_FLASH_16BIT
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#else
+static int write_short (flash_info_t *info, ulong dest, ushort data);
+#endif
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+        uint pbcr;
+        unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1)
+	  {
+	    /* Setup offsets */
+	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	    /* Monitor protection ON by default */
+#if 0	    /* sand: */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				FLASH_BASE0_PRELIM-CFG_MONITOR_LEN+size_b0,
+				FLASH_BASE0_PRELIM-1+size_b0,
+				&flash_info[0]);
+#else
+	    (void)flash_protect(FLAG_PROTECT_SET,
+		      		CFG_MONITOR_BASE,
+		      		CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      		&flash_info[0]);
+#endif
+	    size_b1 = 0 ;
+	    flash_info[0].size = size_b0;
+	  }
+
+	/* 2 banks */
+	else
+	  {
+	    size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+	    /* Re-do sizing to get full correct info */
+
+	    if (size_b1)
+	      {
+		mtdcr(ebccfga, pb0cr);
+		pbcr = mfdcr(ebccfgd);
+		mtdcr(ebccfga, pb0cr);
+		base_b1 = -size_b1;
+		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+		mtdcr(ebccfgd, pbcr);
+		/*          printf("pb1cr = %x\n", pbcr); */
+	      }
+
+	    if (size_b0)
+	      {
+		mtdcr(ebccfga, pb1cr);
+		pbcr = mfdcr(ebccfgd);
+		mtdcr(ebccfga, pb1cr);
+		base_b0 = base_b1 - size_b0;
+		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+		mtdcr(ebccfgd, pbcr);
+		/*            printf("pb0cr = %x\n", pbcr); */
+	      }
+
+	    size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
+
+	    flash_get_offsets (base_b0, &flash_info[0]);
+
+	    /* monitor protection ON by default */
+#if 0	    /* sand: */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				FLASH_BASE0_PRELIM-CFG_MONITOR_LEN+size_b0,
+				FLASH_BASE0_PRELIM-1+size_b0,
+				&flash_info[0]);
+#else
+	    (void)flash_protect(FLAG_PROTECT_SET,
+		      		CFG_MONITOR_BASE,
+		      		CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      		&flash_info[0]);
+#endif
+
+	    if (size_b1) {
+	      /* Re-do sizing to get full correct info */
+	      size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b1, &flash_info[1]);
+
+	      flash_get_offsets (base_b1, &flash_info[1]);
+
+	      /* monitor protection ON by default */
+	      (void)flash_protect(FLAG_PROTECT_SET,
+				  base_b1+size_b1-CFG_MONITOR_LEN,
+				  base_b1+size_b1-1,
+				  &flash_info[1]);
+	      /* monitor protection OFF by default (one is enough) */
+	      (void)flash_protect(FLAG_PROTECT_CLEAR,
+				  base_b0+size_b0-CFG_MONITOR_LEN,
+				  base_b0+size_b0-1,
+				  &flash_info[0]);
+	    } else {
+	      flash_info[1].flash_id = FLASH_UNKNOWN;
+	      flash_info[1].sector_count = -1;
+	    }
+
+	    flash_info[0].size = size_b0;
+	    flash_info[1].size = size_b1;
+	  }/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start adress table */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F320J3A ||
+	    (info->flash_id & FLASH_TYPEMASK) == FLASH_28F640J3A ||
+	    (info->flash_id & FLASH_TYPEMASK) == FLASH_28F128J3A) {
+	    for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = base + (i * info->size/info->sector_count);
+	    }
+	} else if (info->flash_id & FLASH_BTYPE) {
+             if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CFG_FLASH_16BIT
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00008000;
+		info->start[3] = base + 0x0000C000;
+		info->start[4] = base + 0x00010000;
+		info->start[5] = base + 0x00014000;
+		info->start[6] = base + 0x00018000;
+		info->start[7] = base + 0x0001C000;
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00020000) - 0x000E0000;
+	        }
+               }
+             else {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00008000;
+		info->start[2] = base + 0x0000C000;
+		info->start[3] = base + 0x00010000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00020000) - 0x00060000;
+		}
+	       }
+#else
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00002000;
+		info->start[2] = base + 0x00004000;
+		info->start[3] = base + 0x00006000;
+		info->start[4] = base + 0x00008000;
+		info->start[5] = base + 0x0000A000;
+		info->start[6] = base + 0x0000C000;
+		info->start[7] = base + 0x0000E000;
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00070000;
+	        }
+	       }
+             else {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	       }
+#endif
+	} else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+             if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+
+#ifndef CFG_FLASH_16BIT
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000C000;
+		info->start[i--] = base + info->size - 0x00010000;
+		info->start[i--] = base + info->size - 0x00014000;
+		info->start[i--] = base + info->size - 0x00018000;
+		info->start[i--] = base + info->size - 0x0001C000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00020000;
+		}
+
+               } else {
+
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000C000;
+		info->start[i--] = base + info->size - 0x00010000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00020000;
+		}
+	       }
+#else
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000A000;
+		info->start[i--] = base + info->size - 0x0000C000;
+		info->start[i--] = base + info->size - 0x0000E000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+
+               } else {
+
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	       }
+#endif
+	}
+
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+	uchar *boottype;
+	uchar botboot[]=", bottom boot sect)\n";
+	uchar topboot[]=", top boot sector)\n";
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("STM ");		break;
+	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	if (info->flash_id & 0x0001 ) {
+	boottype = botboot;
+	} else {
+	boottype = topboot;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit%s",boottype);
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit%s",boottype);
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit%s",boottype);
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit%s",boottype);
+				break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit%s",boottype);
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit%s",boottype);
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit%s",boottype);
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL800B:	printf ("INTEL28F800B (8 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL800T:	printf ("INTEL28F800T (8 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL160B:	printf ("INTEL28F160B (16 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL160T:	printf ("INTEL28F160T (16 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL320B:	printf ("INTEL28F320B (32 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL320T:	printf ("INTEL28F320T (32 Mbit%s",boottype);
+				break;
+
+#if 0 /* enable when devices are available */
+
+	case FLASH_INTEL640B:	printf ("INTEL28F640B (64 Mbit%s",boottype);
+				break;
+	case FLASH_INTEL640T:	printf ("INTEL28F640T (64 Mbit%s",boottype);
+				break;
+#endif
+	case FLASH_28F320J3A:	printf ("INTEL28F320J3A (32 Mbit%s",boottype);
+				break;
+	case FLASH_28F640J3A:	printf ("INTEL28F640J3A (64 Mbit%s",boottype);
+				break;
+	case FLASH_28F128J3A:	printf ("INTEL28F128J3A (128 Mbit%s",boottype);
+				break;
+
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
+{
+	short i;
+	ulong base = (ulong)addr;
+	FLASH_WORD_SIZE value;
+
+	/* Write auto select command: read Manufacturer ID */
+
+
+#ifndef CFG_FLASH_16BIT
+
+	/*
+	 * Note: if it is an AMD flash and the word at addr[0000]
+         * is 0x00890089 this routine will think it is an Intel
+         * flash device and may(most likely) cause trouble.
+	 */
+
+	addr[0x0000] = 0x00900090;
+	if(addr[0x0000] != 0x00890089){
+		addr[0x0555] = 0x00AA00AA;
+		addr[0x02AA] = 0x00550055;
+		addr[0x0555] = 0x00900090;
+#else
+
+	/*
+	 * Note: if it is an AMD flash and the word at addr[0000]
+         * is 0x0089 this routine will think it is an Intel
+         * flash device and may(most likely) cause trouble.
+	 */
+
+	addr[0x0000] = 0x0090;
+
+	if(addr[0x0000] != 0x0089){
+		addr[0x0555] = 0x00AA;
+		addr[0x02AA] = 0x0055;
+		addr[0x0555] = 0x0090;
+#endif
+	}
+	value = addr[0];
+
+	switch (value) {
+	case (AMD_MANUFACT & FLASH_ID_MASK):
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (FUJ_MANUFACT & FLASH_ID_MASK):
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (STM_MANUFACT & FLASH_ID_MASK):
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	case (SST_MANUFACT & FLASH_ID_MASK):
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (INTEL_MANUFACT & FLASH_ID_MASK):
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+
+	}
+
+	value = addr[1];			/* device ID		*/
+
+	switch (value) {
+
+	case (AMD_ID_LV400T & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (AMD_ID_LV400B & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (AMD_ID_LV800T & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (AMD_ID_LV800B & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (AMD_ID_LV160T & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+
+	case (AMD_ID_LV160B & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+#if 0	/* enable when device IDs are available */
+	case (AMD_ID_LV320T & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+
+	case (AMD_ID_LV320B & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+#endif
+
+	case (INTEL_ID_28F800B3T & FLASH_ID_MASK):
+		info->flash_id += FLASH_INTEL800T;
+		info->sector_count = 23;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (INTEL_ID_28F800B3B & FLASH_ID_MASK):
+		info->flash_id += FLASH_INTEL800B;
+		info->sector_count = 23;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (INTEL_ID_28F160B3T & FLASH_ID_MASK):
+		info->flash_id += FLASH_INTEL160T;
+		info->sector_count = 39;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+
+	case (INTEL_ID_28F160B3B & FLASH_ID_MASK):
+		info->flash_id += FLASH_INTEL160B;
+		info->sector_count = 39;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+
+	case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
+		info->flash_id += FLASH_INTEL320T;
+		info->sector_count = 71;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+
+	case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 71;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+
+#if 0 /* enable when devices are available */
+	case (INTEL_ID_28F320B3T & FLASH_ID_MASK):
+		info->flash_id += FLASH_INTEL320T;
+		info->sector_count = 135;
+		info->size = 0x01000000;
+		break;				/* => 16 MB		*/
+
+	case (INTEL_ID_28F320B3B & FLASH_ID_MASK):
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 135;
+		info->size = 0x01000000;
+		break;				/* => 16 MB		*/
+#endif
+	case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
+		info->flash_id += FLASH_28F320J3A;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		break;				/* => 32 MBit  	*/
+	case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		break;				/* => 64 MBit  	*/
+	case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x01000000;
+		break;				/* => 128 MBit  	*/
+
+	default:
+		/* FIXME*/
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+	}
+
+	flash_get_offsets(base, info);
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+		info->protect[i] = addr[2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+		if( (info->flash_id & 0xFF00) == FLASH_MAN_INTEL){
+		   *addr = (0x00F000F0 & FLASH_ID_MASK);	/* reset bank */
+		} else {
+		   *addr = (0x00FF00FF & FLASH_ID_MASK);	/* reset bank */
+		}
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+
+	volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+	int flag, prot, sect, l_sect, barf;
+	ulong start, now, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+	    ((info->flash_id > FLASH_AMD_COMP) &&
+             ( (info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL ) ) ){
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+    if(info->flash_id < FLASH_AMD_COMP) {
+#ifndef CFG_FLASH_16BIT
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+	addr[0x0555] = 0x00800080;
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+#else
+	addr[0x0555] = 0x00AA;
+	addr[0x02AA] = 0x0055;
+	addr[0x0555] = 0x0080;
+	addr[0x0555] = 0x00AA;
+	addr[0x02AA] = 0x0055;
+#endif
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
+			addr[0] = (0x00300030 & FLASH_ID_MASK);
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
+	while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
+			  (0x00800080&FLASH_ID_MASK)  )
+	{
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			serial_putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (0x00F000F0 & FLASH_ID_MASK);	/* reset bank */
+    } else {
+
+
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			barf = 0;
+#ifndef CFG_FLASH_16BIT
+			addr = (vu_long*)(info->start[sect]);
+			addr[0] = 0x00200020;
+			addr[0] = 0x00D000D0;
+			while(!(addr[0] & 0x00800080));	/* wait for error or finish */
+			if( addr[0] & 0x003A003A) {	/* check for error */
+				barf = addr[0] & 0x003A0000;
+				if( barf ) {
+					barf >>=16;
+				} else {
+					barf = addr[0] & 0x0000003A;
+				}
+			}
+#else
+			addr = (vu_short*)(info->start[sect]);
+			addr[0] = 0x0020;
+			addr[0] = 0x00D0;
+			while(!(addr[0] & 0x0080));	/* wait for error or finish */
+			if( addr[0] & 0x003A)	/* check for error */
+				barf = addr[0] & 0x003A;
+#endif
+			if(barf) {
+				printf("\nFlash error in sector at %lx\n",(unsigned long)addr);
+				if(barf & 0x0002) printf("Block locked, not erased.\n");
+				if((barf & 0x0030) == 0x0030)
+					printf("Command Sequence error.\n");
+				if((barf & 0x0030) == 0x0020)
+					printf("Block Erase error.\n");
+				if(barf & 0x0008) printf("Vpp Low error.\n");
+				rcode = 1;
+			} else printf(".");
+			l_sect = sect;
+		}
+	addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (0x00FF00FF & FLASH_ID_MASK);	/* reset bank */
+
+	}
+
+    }
+	printf (" done\n");
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*flash_info_t *addr2info (ulong addr)
+{
+	flash_info_t *info;
+	int i;
+
+	for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) {
+		if ((addr >= info->start[0]) &&
+		    (addr < (info->start[0] + info->size)) ) {
+			return (info);
+		}
+	}
+
+	return (NULL);
+}
+*/
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ * Make sure all target addresses are within Flash bounds,
+ * and no protected sectors are hit.
+ * Returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - target range includes protected sectors
+ * 8 - target address not in Flash memory
+ */
+
+/*int flash_write (uchar *src, ulong addr, ulong cnt)
+{
+	int i;
+	ulong         end        = addr + cnt - 1;
+	flash_info_t *info_first = addr2info (addr);
+	flash_info_t *info_last  = addr2info (end );
+	flash_info_t *info;
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	if (!info_first || !info_last) {
+		return (8);
+	}
+
+	for (info = info_first; info <= info_last; ++info) {
+		ulong b_end = info->start[0] + info->size;*/	/* bank end addr */
+/*		short s_end = info->sector_count - 1;
+		for (i=0; i<info->sector_count; ++i) {
+			ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
+
+			if ((end >= info->start[i]) && (addr < e_addr) &&
+			    (info->protect[i] != 0) ) {
+				return (4);
+			}
+		}
+	}
+
+*/	/* finally write data to flash */
+/*	for (info = info_first; info <= info_last && cnt>0; ++info) {
+		ulong len;
+
+		len = info->start[0] + info->size - addr;
+		if (len > cnt)
+			len = cnt;
+		if ((i = write_buff(info, src, addr, len)) != 0) {
+			return (i);
+		}
+		cnt  -= len;
+		addr += len;
+		src  += len;
+	}
+	return (0);
+}
+*/
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+#ifndef CFG_FLASH_16BIT
+	ulong cp, wp, data;
+	int l;
+#else
+	ulong cp, wp;
+	ushort data;
+#endif
+	int i, rc;
+
+#ifndef CFG_FLASH_16BIT
+
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+
+#else
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start byte
+	 */
+	if (addr - wp) {
+		data = 0;
+		data = (data << 8) | *src++;
+		--cnt;
+		if ((rc = write_short(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+/*	l = 0; used for debuging  */
+	while (cnt >= 2) {
+		data = 0;
+		for (i=0; i<2; ++i) {
+			data = (data << 8) | *src++;
+		}
+
+/*		if(!l){
+			printf("%x",data);
+			l = 1;
+		}  used for debuging */
+
+		if ((rc = write_short(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<2; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_short(info, wp, data));
+
+
+#endif
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifndef CFG_FLASH_16BIT
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long*)(info->start[0]);
+	ulong start,barf;
+	int flag;
+
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+     if(info->flash_id > FLASH_AMD_COMP) {
+	/* AMD stuff */
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+	addr[0x0555] = 0x00A000A0;
+     } else {
+	/* intel stuff */
+	*addr = 0x00400040;
+     }
+	*((vu_long *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+
+     if(info->flash_id > FLASH_AMD_COMP) {
+
+	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+
+     } else {
+
+	while(!(addr[0] & 0x00800080)){  	/* wait for error or finish */
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+	}
+
+	if( addr[0] & 0x003A003A) {	/* check for error */
+		barf = addr[0] & 0x003A0000;
+		if( barf ) {
+			barf >>=16;
+		} else {
+		        barf = addr[0] & 0x0000003A;
+		}
+		printf("\nFlash write error at address %lx\n",(unsigned long)dest);
+		if(barf & 0x0002) printf("Block locked, not erased.\n");
+		if(barf & 0x0010) printf("Programming error.\n");
+		if(barf & 0x0008) printf("Vpp Low error.\n");
+	  	return(2);
+	}
+
+
+     }
+
+	return (0);
+
+}
+
+#else
+
+static int write_short (flash_info_t *info, ulong dest, ushort data)
+{
+	vu_short *addr = (vu_short*)(info->start[0]);
+	ulong start,barf;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_short *)dest) & data) != data) {
+		return (2);
+	}
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+     if(info->flash_id < FLASH_AMD_COMP) {
+	/* AMD stuff */
+	addr[0x0555] = 0x00AA;
+	addr[0x02AA] = 0x0055;
+	addr[0x0555] = 0x00A0;
+     } else {
+	/* intel stuff */
+        *addr = 0x00D0;
+	*addr = 0x0040;
+     }
+	*((vu_short *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+
+     if(info->flash_id < FLASH_AMD_COMP) {
+          /* AMD stuff */
+	while ((*((vu_short *)dest) & 0x0080) != (data & 0x0080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+
+     } else {
+	/* intel stuff */
+	while(!(addr[0] & 0x0080)){  	/* wait for error or finish */
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+	}
+
+	if( addr[0] & 0x003A) {	/* check for error */
+		barf = addr[0] & 0x003A;
+		printf("\nFlash write error at address %lx\n",(unsigned long)dest);
+		if(barf & 0x0002) printf("Block locked, not erased.\n");
+		if(barf & 0x0010) printf("Programming error.\n");
+		if(barf & 0x0008) printf("Vpp Low error.\n");
+	  	return(2);
+	}
+	*addr = 0x00B0;
+	*addr = 0x0070;
+	while(!(addr[0] & 0x0080)){  	/* wait for error or finish */
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) return (1);
+	}
+
+	*addr = 0x00FF;
+
+     }
+
+	return (0);
+
+}
+
+
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
diff --git a/board/eric/init.S b/board/eric/init.S
new file mode 100644
index 00000000000..bdf90a5f25d
--- /dev/null
+++ b/board/eric/init.S
@@ -0,0 +1,355 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/*       This source code has been made available to you by IBM on an AS-IS */
+/*       basis.  Anyone receiving this source is licensed under IBM */
+/*       copyrights to use it in any way he or she deems fit, including */
+/*       copying it, modifying it, compiling it, and redistributing it either */
+/*       with or without modifications.  No license under IBM patents or */
+/*       patent applications is to be implied by the copyright license. */
+/* */
+/*       Any user of this software should understand that IBM cannot provide */
+/*       technical support for this software and will not be responsible for */
+/*       any consequences resulting from the use of this software. */
+/* */
+/*       Any person who transfers this source code or any derivative work */
+/*       must include the IBM copyright notice, this paragraph, and the */
+/*       preceding two paragraphs in the transferred software. */
+/* */
+/*       COPYRIGHT   I B M   CORPORATION 1995 */
+/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function:     ext_bus_cntlr_init */
+/* Description:  Initializes the External Bus Controller for the external */
+/*		peripherals. IMPORTANT: For pass1 this code must run from */
+/*		cache since you can not reliably change a peripheral banks */
+/*		timing register (pbxap) while running code from that bank. */
+/*		For ex., since we are running from ROM on bank 0, we can NOT */
+/*		execute the code that modifies bank 0 timings from ROM, so */
+/*		we run it from cache. */
+/* */
+/*----------------------------------------------------------------------------- */
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+     	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+        mflr    r4                      /* save link register */
+        bl      ..getAddr
+..getAddr:
+        mflr    r3                      /* get address of ..getAddr */
+        mtlr    r4                      /* restore link register */
+        addi    r4,0,14                 /* set ctr to 10; used to prefetch */
+        mtctr   r4                      /* 10 cache lines to fit this function */
+                                        /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+        icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+        addi    r3,r3,32		/* move to next cache line */
+        bdnz    ..ebcloop               /* continue for 10 cache lines */
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure all accesses to ROM are complete before changing */
+	/* bank 0 timings. 200usec should be enough. */
+        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+        /*------------------------------------------------------------------- */
+	addis	r3,0,0x0
+        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+        mtctr   r3
+..spinlp:
+        bdnz    ..spinlp                /* spin loop */
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 0 (Flash) initialization (from openbios) */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb0ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS0_AP@h
+        ori     r4,r4,CS0_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb0cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS0_CR@h
+        ori     r4,r4,CS0_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 1 (NVRAM/RTC) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb1ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS1_AP@h
+        ori     r4,r4,CS1_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb1cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS1_CR@h
+        ori     r4,r4,CS1_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 2 (A/D converter) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb2ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS2_AP@h
+        ori     r4,r4,CS2_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb2cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS2_CR@h
+        ori     r4,r4,CS2_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 3 (Ethernet PHY Reset) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb3ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS3_AP@h
+        ori     r4,r4,CS3_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb3cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS3_CR@h
+        ori     r4,r4,CS3_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb4ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS4_AP@h
+        ori     r4,r4,CS4_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb4cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS4_CR@h
+        ori     r4,r4,CS4_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb5ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS5_AP@h
+        ori     r4,r4,CS5_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb5cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS5_CR@h
+        ori     r4,r4,CS5_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 6 (CPU LED0) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb6ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS6_AP@h
+        ori     r4,r4,CS6_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb6cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS6_CR@h
+        ori     r4,r4,CS5_CR@l
+        mtdcr   ebccfgd,r4
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 7 (CPU LED1) initialization */
+        /*----------------------------------------------------------------------- */
+
+        addi    r4,0,pb7ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS7_AP@h
+        ori     r4,r4,CS7_AP@l
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb7cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,CS7_CR@h
+        ori     r4,r4,CS7_CR@l
+        mtdcr   ebccfgd,r4
+
+/*	addis   r4,r0,FPGA_BRDC@h */
+/*        ori     r4,r4,FPGA_BRDC@l */
+/*        lbz     r3,0(r4)                //get FPGA board control reg */
+/*        eieio */
+/*        ori	r3,r3,0x01              //set UART1 control to select CTS/RTS */
+/*	stb     r3,0(r4) */
+
+	nop				/* pass2 DCR errata #8 */
+        blr
+
+/*----------------------------------------------------------------------------- */
+/* Function:     sdram_init */
+/* Description:  Configures SDRAM memory banks on ERIC. */
+/*               We do manually init our SDRAM. */
+/*               If we have two SDRAM banks, simply undef SINGLE_BANK (ROLF :-) */
+/*		 It is assumed that a 32MB 12x8(2) SDRAM is used. */
+/*----------------------------------------------------------------------------- */
+        .globl  sdram_init
+
+sdram_init:
+
+	mflr	r31
+
+#ifdef CFG_SDRAM_MANUALLY
+        /*------------------------------------------------------------------- */
+        /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb0cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB0CF@h
+        ori     r4,r4,MB0CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb1cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB1CF@h
+        ori     r4,r4,MB1CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set MB2CF for bank 2. off */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb2cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB2CF@h
+        ori     r4,r4,MB2CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set MB3CF for bank 3. off */
+        /*------------------------------------------------------------------- */
+
+        addi    r4,0,mem_mb3cf
+        mtdcr   memcfga,r4
+        addis   r4,0,MB3CF@h
+        ori     r4,r4,MB3CF@l
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
+        /* To set the appropriate timings, we need to know the SDRAM speed. */
+	/* We can use the PLB speed since the SDRAM speed is the same as */
+	/* the PLB speed. The PLB speed is the FBK divider times the */
+	/* 405GP reference clock, which on the Walnut board is 33Mhz. */
+	/* Thus, if FBK div is 2, SDRAM is 66Mhz; if FBK div is 3, SDRAM is */
+	/* 100Mhz; if FBK is 3, SDRAM is 133Mhz. */
+	/* NOTE: The Walnut board supports SDRAM speeds of 66Mhz, 100Mhz, and */
+	/* maybe 133Mhz. */
+        /*------------------------------------------------------------------- */
+
+        mfdcr   r5,strap                 /* determine FBK divider */
+                                          /* via STRAP reg to calc PLB speed. */
+                                          /* SDRAM speed is the same as the PLB */
+				          /* speed. */
+        rlwinm  r4,r5,4,0x3             /* get FBK divide bits */
+
+..chk_66:
+        cmpi    %cr0,0,r4,0x1
+        bne     ..chk_100
+	addis	r6,0,SDTR_66@h		/* SDTR1 value for 66Mhz */
+	ori     r6,r6,SDTR_66@l
+	addis	r7,0,RTR_66		/* RTR value for 66Mhz */
+        b	..sdram_ok
+..chk_100:
+        cmpi    %cr0,0,r4,0x2
+        bne     ..chk_133
+        addis   r6,0,SDTR_100@h        /* SDTR1 value for 100Mhz */
+        ori     r6,r6,SDTR_100@l
+        addis   r7,0,RTR_100           /* RTR value for 100Mhz */
+        b       ..sdram_ok
+..chk_133:
+        addis   r6,0,0x0107            /* SDTR1 value for 133Mhz */
+        ori     r6,r6,0x4015
+        addis   r7,0,0x07F0            /* RTR value for 133Mhz */
+
+..sdram_ok:
+        /*------------------------------------------------------------------- */
+        /* Set SDTR1 */
+        /*------------------------------------------------------------------- */
+        addi    r4,0,mem_sdtr1
+        mtdcr   memcfga,r4
+        mtdcr   memcfgd,r6
+
+        /*------------------------------------------------------------------- */
+        /* Set RTR */
+        /*------------------------------------------------------------------- */
+        addi    r4,0,mem_rtr
+        mtdcr   memcfga,r4
+        mtdcr   memcfgd,r7
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure 200usec have elapsed since reset. Assume worst */
+        /* case that the core is running 200Mhz: */
+        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+        /*------------------------------------------------------------------- */
+        addis   r3,0,0x0000
+        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+        mtctr   r3
+..spinlp2:
+        bdnz    ..spinlp2               /* spin loop */
+
+        /*------------------------------------------------------------------- */
+        /* Set memory controller options reg, MCOPT1. */
+	/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
+	/* read/prefetch. */
+        /*------------------------------------------------------------------- */
+        addi    r4,0,mem_mcopt1
+        mtdcr   memcfga,r4
+        addis   r4,0,0x8080             /* set DC_EN=1 */
+        ori     r4,r4,0x0000
+        mtdcr   memcfgd,r4
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure 10msec have elapsed since reset. This is */
+        /* required for the MPC952 to stabalize. Assume worst */
+        /* case that the core is running 200Mhz: */
+        /*   200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
+        /* This delay should occur before accessing SDRAM. */
+        /*------------------------------------------------------------------- */
+        addis   r3,0,0x001E
+        ori     r3,r3,0x8480          /* ensure 10msec have passed since reset */
+        mtctr   r3
+..spinlp3:
+        bdnz    ..spinlp3                /* spin loop */
+
+#else
+/*fixme: do SDRAM Autoconfig from EEPROM here */
+
+#endif
+        mtlr    r31                     /* restore lr */
+        blr
diff --git a/board/esd/ar405/flash.c b/board/esd/ar405/flash.c
new file mode 100644
index 00000000000..4fa6b2733fd
--- /dev/null
+++ b/board/esd/ar405/flash.c
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+        uint pbcr;
+        unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	base_b0 = FLASH_BASE0_PRELIM;
+	size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	base_b1 = FLASH_BASE1_PRELIM;
+	size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+	/* Re-do sizing to get full correct info */
+
+        if (size_b1)
+          {
+            mtdcr(ebccfga, pb0cr);
+            pbcr = mfdcr(ebccfgd);
+            mtdcr(ebccfga, pb0cr);
+            base_b1 = -size_b1;
+            pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+            mtdcr(ebccfgd, pbcr);
+            /*          printf("pb1cr = %x\n", pbcr); */
+          }
+
+        if (size_b0)
+          {
+            mtdcr(ebccfga, pb1cr);
+            pbcr = mfdcr(ebccfgd);
+            mtdcr(ebccfga, pb1cr);
+            base_b0 = base_b1 - size_b0;
+            pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+            mtdcr(ebccfgd, pbcr);
+            /*            printf("pb0cr = %x\n", pbcr); */
+          }
+
+	size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+	flash_get_offsets (base_b0, &flash_info[0]);
+
+	/* monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    base_b0+size_b0-CFG_MONITOR_LEN,
+			    base_b0+size_b0-1,
+			    &flash_info[0]);
+
+	if (size_b1) {
+		/* Re-do sizing to get full correct info */
+		size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+		flash_get_offsets (base_b1, &flash_info[1]);
+
+		/* monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    base_b1+size_b1-CFG_MONITOR_LEN,
+				    base_b1+size_b1-1,
+				    &flash_info[1]);
+                /* monitor protection OFF by default (one is enough) */
+                (void)flash_protect(FLAG_PROTECT_CLEAR,
+                                    base_b0+size_b0-CFG_MONITOR_LEN,
+                                    base_b0+size_b0-1,
+                                    &flash_info[0]);
+	} else {
+		flash_info[1].flash_id = FLASH_UNKNOWN;
+		flash_info[1].sector_count = -1;
+	}
+
+	flash_info[0].size = size_b0;
+	flash_info[1].size = size_b1;
+
+	return (size_b0 + size_b1);
+}
diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c
new file mode 100644
index 00000000000..214948f6d85
--- /dev/null
+++ b/board/esd/canbt/flash.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+        uint pbcr;
+        unsigned long base_b0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+        /* Setup offsets */
+        flash_get_offsets (-size_b0, &flash_info[0]);
+
+        /* Re-do sizing to get full correct info */
+        mtdcr(ebccfga, pb0cr);
+        pbcr = mfdcr(ebccfgd);
+        mtdcr(ebccfga, pb0cr);
+        base_b0 = -size_b0;
+        pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+        mtdcr(ebccfgd, pbcr);
+        /*          printf("pb1cr = %x\n", pbcr); */
+
+        /* Monitor protection ON by default */
+        (void)flash_protect(FLAG_PROTECT_SET,
+                            -CFG_MONITOR_LEN,
+                            0xffffffff,
+                            &flash_info[0]);
+
+        flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
diff --git a/board/esd/cpciiser4/flash.c b/board/esd/cpciiser4/flash.c
new file mode 100644
index 00000000000..214948f6d85
--- /dev/null
+++ b/board/esd/cpciiser4/flash.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+        uint pbcr;
+        unsigned long base_b0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+        /* Setup offsets */
+        flash_get_offsets (-size_b0, &flash_info[0]);
+
+        /* Re-do sizing to get full correct info */
+        mtdcr(ebccfga, pb0cr);
+        pbcr = mfdcr(ebccfgd);
+        mtdcr(ebccfga, pb0cr);
+        base_b0 = -size_b0;
+        pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+        mtdcr(ebccfgd, pbcr);
+        /*          printf("pb1cr = %x\n", pbcr); */
+
+        /* Monitor protection ON by default */
+        (void)flash_protect(FLAG_PROTECT_SET,
+                            -CFG_MONITOR_LEN,
+                            0xffffffff,
+                            &flash_info[0]);
+
+        flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
diff --git a/board/esd/dasa_sim/eeprom.c b/board/esd/dasa_sim/eeprom.c
new file mode 100644
index 00000000000..59ef1d6ab4b
--- /dev/null
+++ b/board/esd/dasa_sim/eeprom.c
@@ -0,0 +1,181 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+
+
+#define EEPROM_CAP              0x50000358
+#define EEPROM_DATA             0x5000035c
+
+
+unsigned int eepromReadLong(int offs)
+{
+  unsigned int value;
+  volatile unsigned short ret;
+  int count;
+
+  *(unsigned short *)EEPROM_CAP = offs;
+
+  count = 0;
+
+  for (;;)
+    {
+      count++;
+      ret = *(unsigned short *)EEPROM_CAP;
+
+      if ((ret & 0x8000) != 0)
+        break;
+    }
+
+  value = *(unsigned long *)EEPROM_DATA;
+
+  return value;
+}
+
+
+unsigned char eepromReadByte(int offs)
+{
+  unsigned int valueLong;
+  unsigned char *ptr;
+
+  valueLong = eepromReadLong(offs & ~3);
+  ptr = (unsigned char *)&valueLong;
+
+  return ptr[offs & 3];
+}
+
+
+void eepromWriteLong(int offs, unsigned int value)
+{
+  volatile unsigned short ret;
+  int count;
+
+  count = 0;
+
+  *(unsigned long *)EEPROM_DATA = value;
+  *(unsigned short *)EEPROM_CAP = 0x8000 + offs;
+
+  for (;;)
+    {
+      count++;
+      ret = *(unsigned short *)EEPROM_CAP;
+
+      if ((ret & 0x8000) == 0)
+        break;
+    }
+}
+
+
+void eepromWriteByte(int offs, unsigned char valueByte)
+{
+  unsigned int valueLong;
+  unsigned char *ptr;
+
+  valueLong = eepromReadLong(offs & ~3);
+  ptr = (unsigned char *)&valueLong;
+
+  ptr[offs & 3] = valueByte;
+
+  eepromWriteLong(offs & ~3, valueLong);
+}
+
+
+void i2c_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+  int i;
+  int len2, ptr;
+
+  /*  printf("\naddr=%x alen=%x buffer=%x len=%x", addr[0], addr[1], *(short *)addr, alen, buffer, len); // test-only */
+
+  ptr = *(short *)addr;
+
+  /*
+   * Read till lword boundary
+   */
+  len2 = 4 - (*(short *)addr & 0x0003);
+  for (i=0; i<len2; i++)
+    {
+      *buffer++ = eepromReadByte(ptr++);
+    }
+
+  /*
+   * Read all lwords
+   */
+  len2 = (len - len2) >> 2;
+  for (i=0; i<len2; i++)
+    {
+      *(unsigned int *)buffer = eepromReadLong(ptr);
+      buffer += 4;
+      ptr += 4;
+    }
+
+  /*
+   * Read last bytes
+   */
+  len2 = (*(short *)addr + len) & 0x0003;
+  for (i=0; i<len2; i++)
+    {
+      *buffer++ = eepromReadByte(ptr++);
+    }
+}
+
+void i2c_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+  int i;
+  int len2, ptr;
+
+  /*  printf("\naddr=%x alen=%x buffer=%x len=%x", addr[0], addr[1], *(short *)addr, alen, buffer, len); // test-only */
+
+  ptr = *(short *)addr;
+
+  /*
+   * Write till lword boundary
+   */
+  len2 = 4 - (*(short *)addr & 0x0003);
+  for (i=0; i<len2; i++)
+    {
+      eepromWriteByte(ptr++, *buffer++);
+    }
+
+  /*
+   * Write all lwords
+   */
+  len2 = (len - len2) >> 2;
+  for (i=0; i<len2; i++)
+    {
+      eepromWriteLong(ptr, *(unsigned int *)buffer);
+      buffer += 4;
+      ptr += 4;
+    }
+
+  /*
+   * Write last bytes
+   */
+  len2 = (*(short *)addr + len) & 0x0003;
+  for (i=0; i<len2; i++)
+    {
+      eepromWriteByte(ptr++, *buffer++);
+    }
+}
diff --git a/board/evb64260/ecctest.c b/board/evb64260/ecctest.c
new file mode 100644
index 00000000000..e7c58b3a292
--- /dev/null
+++ b/board/evb64260/ecctest.c
@@ -0,0 +1,91 @@
+#ifdef ECC_TEST
+static inline void ecc_off(void)
+{
+	*(volatile int *)(INTERNAL_REG_BASE_ADDR+0x4b4) &= ~0x00200000;
+}
+
+static inline void ecc_on(void)
+{
+	*(volatile int *)(INTERNAL_REG_BASE_ADDR+0x4b4) |= 0x00200000;
+}
+
+static int putshex(const char *buf, int len)
+{
+    int i;
+    for (i=0;i<len;i++) {
+	printf("%02x", buf[i]);
+    }
+    return 0;
+}
+
+static int char_memcpy(void *d, const void *s, int len)
+{
+    int i;
+    char *cd=d;
+    const char *cs=s;
+    for(i=0;i<len;i++) {
+	*(cd++)=*(cs++);
+    }
+    return 0;
+}
+
+static int memory_test(char *buf)
+{
+    const char src[][16]={
+	{   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0},
+	{0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01},
+	{0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02},
+	{0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04},
+	{0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08},
+	{0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10},
+	{0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20},
+	{0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x40},
+	{0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80},
+	{0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55,0x55},
+	{0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa},
+	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff}
+    };
+    const int foo[] = {0};
+    int i,j,a;
+
+    printf("\ntest @ %d %p\n", foo[0], buf);
+    for(i=0;i<12;i++) {
+	for(a=0;a<8;a++) {
+	    const char *s=src[i]+a;
+	    int align=(unsigned)(s)&0x7;
+	    /* ecc_off(); */
+	    memcpy(buf,s,8);
+	    /* ecc_on(); */
+	    putshex(s,8);
+	    if(memcmp(buf,s,8)) {
+		putc('\n');
+		putshex(buf,8);
+		printf(" [FAIL] (%p) align=%d\n", s, align);
+		for(j=0;j<8;j++) {
+		    s[j]==buf[j]?puts("  "):printf("%02x", (s[j])^(buf[j]));
+		}
+		putc('\n');
+	    } else {
+		printf(" [PASS] (%p) align=%d\n", s, align);
+	    }
+	    /* ecc_off(); */
+	    char_memcpy(buf,s,8);
+	    /* ecc_on(); */
+	    putshex(s,8);
+	    if(memcmp(buf,s,8)) {
+		putc('\n');
+		putshex(buf,8);
+		printf(" [FAIL] (%p) align=%d\n", s, align);
+		for(j=0;j<8;j++) {
+		    s[j]==buf[j]?puts("  "):printf("%02x", (s[j])^(buf[j]));
+		}
+		putc('\n');
+	    } else {
+		printf(" [PASS] (%p) align=%d\n", s, align);
+	    }
+	}
+    }
+
+    return 0;
+}
+#endif
diff --git a/board/evb64260/eth.h b/board/evb64260/eth.h
new file mode 100644
index 00000000000..ecc376213a5
--- /dev/null
+++ b/board/evb64260/eth.h
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * eth.h - header file for the polled mode GT ethernet driver
+ */
+
+#ifndef __GT6426x_ETH_H__
+#define __GT6426x_ETH_H__
+
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <common.h>
+
+typedef struct eth0_tx_desc_struct {
+	volatile __u32 bytecount_reserved;
+	volatile __u32 command_status;
+	volatile struct eth0_tx_desc_struct * next_desc;
+	/* Note - the following will not work for 64 bit addressing */
+	volatile unsigned char * buff_pointer;
+} eth0_tx_desc_single __attribute__ ((packed));
+
+typedef struct eth0_rx_desc_struct {
+  volatile __u32 buff_size_byte_count;
+  volatile __u32 command_status;
+  volatile struct eth0_rx_desc_struct * next_desc;
+  volatile unsigned char * buff_pointer;
+} eth0_rx_desc_single __attribute__ ((packed));
+
+#define NT 20 /* Number of Transmit buffers */
+#define NR 20 /* Number of Receive buffers */
+#define MAX_BUFF_SIZE (1536+2*CACHE_LINE_SIZE) /* 1600 */
+#define ETHERNET_PORTS_DIFFERENCE_OFFSETS 0x400
+
+unsigned long TDN_ETH0 , RDN_ETH0; /* Rx/Tx current Descriptor Number*/
+unsigned int EVB64260_ETH0_irq;
+
+#define CLOSED 0
+#define OPENED 1
+
+#define PORT_ETH0 0
+
+extern eth0_tx_desc_single *eth0_tx_desc;
+extern eth0_rx_desc_single *eth0_rx_desc;
+extern char *eth0_tx_buffer;
+extern char *eth0_rx_buffer[NR];
+extern char *eth_data;
+
+extern int gt6426x_eth_poll(void *v);
+extern int gt6426x_eth_transmit(void *v, volatile char *p, unsigned int s);
+extern void gt6426x_eth_disable(void *v);
+extern int gt6426x_eth_probe(void *v, bd_t *bis);
+
+#endif  /* __GT64260x_ETH_H__ */
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
new file mode 100644
index 00000000000..31a6a0d1de8
--- /dev/null
+++ b/board/evb64260/mpsc.c
@@ -0,0 +1,864 @@
+/*
+ * (C) Copyright 2001
+ * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpsc.c - driver for console over the MPSC.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/cache.h>
+
+#include <malloc.h>
+#include "mpsc.h"
+
+int (*mpsc_putchar)(char ch) = mpsc_putchar_early;
+
+static volatile unsigned int *rx_desc_base=NULL;
+static unsigned int rx_desc_index=0;
+static volatile unsigned int *tx_desc_base=NULL;
+static unsigned int tx_desc_index=0;
+
+/* local function declarations */
+static int galmpsc_connect(int channel, int connect);
+static int galmpsc_route_serial(int channel, int connect);
+static int galmpsc_route_rx_clock(int channel, int brg);
+static int galmpsc_route_tx_clock(int channel, int brg);
+static int galmpsc_write_config_regs(int mpsc, int mode);
+static int galmpsc_config_channel_regs(int mpsc);
+static int galmpsc_set_char_length(int mpsc, int value);
+static int galmpsc_set_stop_bit_length(int mpsc, int value);
+static int galmpsc_set_parity(int mpsc, int value);
+static int galmpsc_enter_hunt(int mpsc);
+static int galmpsc_set_brkcnt(int mpsc, int value);
+static int galmpsc_set_tcschar(int mpsc, int value);
+static int galmpsc_set_snoop(int mpsc, int value);
+static int galmpsc_shutdown(int mpsc);
+
+static int galsdma_set_RFT(int channel);
+static int galsdma_set_SFM(int channel);
+static int galsdma_set_rxle(int channel);
+static int galsdma_set_txle(int channel);
+static int galsdma_set_burstsize(int channel, unsigned int value);
+static int galsdma_set_RC(int channel, unsigned int value);
+
+static int galbrg_set_CDV(int channel, int value);
+static int galbrg_enable(int channel);
+static int galbrg_disable(int channel);
+static int galbrg_set_clksrc(int channel, int value);
+static int galbrg_set_CUV(int channel, int value);
+
+static void galsdma_enable_rx(void);
+
+/* static int galbrg_reset(int channel); */
+
+#define SOFTWARE_CACHE_MANAGEMENT
+
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+#define FLUSH_DCACHE(a,b)		 if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
+#define INVALIDATE_DCACHE(a,b)		 if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
+#else
+#define FLUSH_DCACHE(a,b)
+#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
+#define INVALIDATE_DCACHE(a,b)
+#endif
+
+
+/* GT64240A errata: cant read MPSC/BRG registers... so make mirrors in ram for read/modify write */
+#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->mirror_hack))
+
+#define GT_REG_WRITE_MIRROR_G(a,d) {MIRROR_HACK->a ## _M = d; GT_REG_WRITE(a,d);}
+#define GTREGREAD_MIRROR_G(a) (MIRROR_HACK->a ## _M)
+
+#define GT_REG_WRITE_MIRROR(a,i,g,d) {MIRROR_HACK->a ## _M[i] = d; GT_REG_WRITE(a + (i*g),d);}
+#define GTREGREAD_MIRROR(a,i,g) (MIRROR_HACK->a ## _M[i])
+
+/* make sure this isn't bigger than 16 long words (u-boot.h) */
+struct _tag_mirror_hack {
+    unsigned GALMPSC_PROTOCONF_REG_M[2];	/* 8008 */
+    unsigned GALMPSC_CHANNELREG_1_M[2];		/* 800c */
+    unsigned GALMPSC_CHANNELREG_2_M[2];		/* 8010 */
+    unsigned GALBRG_0_CONFREG_M[2];		/* b200 */
+
+    unsigned GALMPSC_ROUTING_REGISTER_M;	/* b400 */
+    unsigned GALMPSC_RxC_ROUTE_M;		/* b404 */
+    unsigned GALMPSC_TxC_ROUTE_M;		/* b408 */
+
+    unsigned int baudrate;			/* current baudrate, for tsc delay calc */
+};
+
+/* static struct _tag_mirror_hack *mh = NULL;   */
+
+/* special function for running out of flash.  doesn't modify any
+ * global variables [josh] */
+int
+mpsc_putchar_early(char ch)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int mpsc=CHANNEL;
+	int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+	galmpsc_set_tcschar(mpsc,ch);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_2+(mpsc*GALMPSC_REG_GAP), temp|0x200);
+
+#define MAGIC_FACTOR	(10*1000000)
+
+	udelay(MAGIC_FACTOR / MIRROR_HACK->baudrate);
+	return 0;
+}
+
+/* This is used after relocation, see serial.c and mpsc_init2 */
+static int
+mpsc_putchar_sdma(char ch)
+{
+    	volatile unsigned int *p;
+	unsigned int temp;
+
+
+	/* align the descriptor */
+	p = tx_desc_base;
+	memset((void *)p, 0, 8 * sizeof(unsigned int));
+
+	/* fill one 64 bit buffer */
+	/* word swap, pad with 0 */
+	p[4] = 0;						/* x */
+	p[5] = (unsigned int)ch;				/* x */
+
+	/* CHANGED completely according to GT64260A dox - NTL */
+	p[0] = 0x00010001;					/* 0 */
+	p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;		/* 4 */
+	p[2] = 0;						/* 8 */
+	p[3] = (unsigned int)&p[4];				/* c */
+
+#if 0
+	p[9] = DESC_FIRST | DESC_LAST;
+	p[10] = (unsigned int)&p[0];
+	p[11] = (unsigned int)&p[12];
+#endif
+
+	FLUSH_DCACHE(&p[0], &p[8]);
+
+	GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
+		     (unsigned int)&p[0]);
+	GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
+		     (unsigned int)&p[0]);
+
+	temp = GTREGREAD(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF));
+	temp |= (TX_DEMAND | TX_STOP);
+	GT_REG_WRITE(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF), temp);
+
+	INVALIDATE_DCACHE(&p[1], &p[2]);
+
+	while(p[1] & DESC_OWNER) {
+	    udelay(100);
+	    INVALIDATE_DCACHE(&p[1], &p[2]);
+	}
+
+	return 0;
+}
+
+char
+mpsc_getchar(void)
+{
+    DECLARE_GLOBAL_DATA_PTR;
+    static unsigned int done = 0;
+    volatile char ch;
+    unsigned int len=0, idx=0, temp;
+
+    volatile unsigned int *p;
+
+
+    do {
+	p=&rx_desc_base[rx_desc_index*8];
+
+	INVALIDATE_DCACHE(&p[0], &p[1]);
+	/* Wait for character */
+	while (p[1] & DESC_OWNER){
+	    udelay(100);
+	    INVALIDATE_DCACHE(&p[0], &p[1]);
+	}
+
+	/* Handle error case */
+	if (p[1] & (1<<15)) {
+		printf("oops, error: %08x\n", p[1]);
+
+		temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,CHANNEL,GALMPSC_REG_GAP);
+		temp |= (1 << 23);
+		GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2, CHANNEL,GALMPSC_REG_GAP, temp);
+
+		/* Can't poll on abort bit, so we just wait. */
+		udelay(100);
+
+		galsdma_enable_rx();
+	}
+
+	/* Number of bytes left in this descriptor */
+	len = p[0] & 0xffff;
+
+	if (len) {
+	    /* Where to look */
+	    idx = 5;
+	    if (done > 3) idx = 4;
+	    if (done > 7) idx = 7;
+	    if (done > 11) idx = 6;
+
+	    INVALIDATE_DCACHE(&p[idx], &p[idx+1]);
+	    ch = p[idx] & 0xff;
+	    done++;
+	}
+
+	if (done < len) {
+		/* this descriptor has more bytes still
+		 * shift down the char we just read, and leave the
+		 * buffer in place for the next time around
+		 */
+		p[idx] =  p[idx] >> 8;
+		FLUSH_DCACHE(&p[idx], &p[idx+1]);
+	}
+
+	if (done == len) {
+	    	/* nothing left in this descriptor.
+		 * go to next one
+		 */
+		p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
+		p[0] = 0x00100000;
+		FLUSH_DCACHE(&p[0], &p[1]);
+		/* Next descriptor */
+		rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+		done = 0;
+	}
+    } while (len==0);	/* galileo bug.. len might be zero */
+
+    return ch;
+}
+
+int
+mpsc_test_char(void)
+{
+	volatile unsigned int *p=&rx_desc_base[rx_desc_index*8];
+
+	INVALIDATE_DCACHE(&p[1], &p[2]);
+
+	if (p[1] & DESC_OWNER) return 0;
+	else return 1;
+}
+
+int
+mpsc_init(int baud)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack));
+	MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff;
+
+	/* BRG CONFIG */
+	galbrg_set_baudrate(CHANNEL, baud);
+#ifdef CONFIG_ZUMA_V2
+	galbrg_set_clksrc(CHANNEL,0x8);	/* connect TCLK -> BRG */
+#else
+	galbrg_set_clksrc(CHANNEL,0);
+#endif
+	galbrg_set_CUV(CHANNEL, 0);
+	galbrg_enable(CHANNEL);
+
+	/* Set up clock routing */
+	galmpsc_connect(CHANNEL, GALMPSC_CONNECT);
+	galmpsc_route_serial(CHANNEL, GALMPSC_CONNECT);
+	galmpsc_route_rx_clock(CHANNEL, CHANNEL);
+	galmpsc_route_tx_clock(CHANNEL, CHANNEL);
+
+	/* reset MPSC state */
+	galmpsc_shutdown(CHANNEL);
+
+	/* SDMA CONFIG */
+	galsdma_set_burstsize(CHANNEL, L1_CACHE_BYTES/8);	/* in 64 bit words (8 bytes) */
+	galsdma_set_txle(CHANNEL);
+	galsdma_set_rxle(CHANNEL);
+	galsdma_set_RC(CHANNEL, 0xf);
+	galsdma_set_SFM(CHANNEL);
+	galsdma_set_RFT(CHANNEL);
+
+	/* MPSC CONFIG */
+	galmpsc_write_config_regs(CHANNEL, GALMPSC_UART);
+	galmpsc_config_channel_regs(CHANNEL);
+	galmpsc_set_char_length(CHANNEL, GALMPSC_CHAR_LENGTH_8);       /* 8 */
+	galmpsc_set_parity(CHANNEL, GALMPSC_PARITY_NONE);              /* N */
+	galmpsc_set_stop_bit_length(CHANNEL, GALMPSC_STOP_BITS_1);     /* 1 */
+
+	/* COMM_MPSC CONFIG */
+#ifdef SOFTWARE_CACHE_MANAGEMENT
+	galmpsc_set_snoop(CHANNEL, 0);     				/* disable snoop */
+#else
+	galmpsc_set_snoop(CHANNEL, 1);     				/* enable snoop */
+#endif
+
+	return 0;
+}
+
+void
+mpsc_init2(void)
+{
+	int i;
+
+	mpsc_putchar = mpsc_putchar_sdma;
+
+	/* RX descriptors */
+	rx_desc_base = (unsigned int *)malloc(((RX_DESC+1)*8) *
+		sizeof(unsigned int));
+
+	/* align descriptors */
+	rx_desc_base = (unsigned int *)
+		(((unsigned int)rx_desc_base+32) & 0xFFFFFFF0);
+
+	rx_desc_index = 0;
+
+	memset((void *)rx_desc_base, 0, (RX_DESC*8)*sizeof(unsigned int));
+
+	for (i = 0; i < RX_DESC; i++) {
+		rx_desc_base[i*8 + 3] = (unsigned int)&rx_desc_base[i*8 + 4]; /* Buffer */
+		rx_desc_base[i*8 + 2] = (unsigned int)&rx_desc_base[(i+1)*8]; /* Next descriptor */
+		rx_desc_base[i*8 + 1] = DESC_OWNER | DESC_FIRST | DESC_LAST;  /* Command & control */
+		rx_desc_base[i*8] = 0x00100000;
+	}
+	rx_desc_base[(i-1)*8 + 2] = (unsigned int)&rx_desc_base[0];
+
+	FLUSH_DCACHE(&rx_desc_base[0], &rx_desc_base[RX_DESC*8]);
+	GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR+(CHANNEL*GALSDMA_REG_DIFF),
+		     (unsigned int)&rx_desc_base[0]);
+
+	/* TX descriptors */
+	tx_desc_base = (unsigned int *)malloc(((TX_DESC+1)*8) *
+		sizeof(unsigned int));
+
+	/* align descriptors */
+	tx_desc_base = (unsigned int *)
+		(((unsigned int)tx_desc_base+32) & 0xFFFFFFF0);
+
+	tx_desc_index = -1;
+
+	memset((void *)tx_desc_base, 0, (TX_DESC*8)*sizeof(unsigned int));
+
+	for (i = 0; i < TX_DESC; i++) {
+		tx_desc_base[i*8 + 5] = (unsigned int)0x23232323;
+		tx_desc_base[i*8 + 4] = (unsigned int)0x23232323;
+		tx_desc_base[i*8 + 3] = (unsigned int)&tx_desc_base[i*8 + 4];
+		tx_desc_base[i*8 + 2] = (unsigned int)&tx_desc_base[(i+1)*8];
+		tx_desc_base[i*8 + 1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
+
+		/* set sbytecnt and shadow byte cnt to 1 */
+		tx_desc_base[i*8] = 0x00010001;
+	}
+	tx_desc_base[(i-1)*8 + 2] = (unsigned int)&tx_desc_base[0];
+
+	FLUSH_DCACHE(&tx_desc_base[0], &tx_desc_base[TX_DESC*8]);
+
+	udelay(100);
+
+	galsdma_enable_rx();
+
+	return;
+}
+
+int
+galbrg_set_baudrate(int channel, int rate)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int clock;
+
+	galbrg_disable(channel);
+
+#ifdef CONFIG_ZUMA_V2
+	/* from tclk */
+	clock = (CFG_BUS_HZ/(16*rate)) - 1;
+#else
+	clock = (3686400/(16*rate)) - 1;
+#endif
+
+	galbrg_set_CDV(channel, clock);
+
+	galbrg_enable(channel);
+
+	MIRROR_HACK->baudrate = rate;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+/* Below are all the private functions that no one else needs */
+
+static int
+galbrg_set_CDV(int channel, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
+	temp &= 0xFFFF0000;
+	temp |= (value & 0x0000FFFF);
+	GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG,channel,GALBRG_REG_GAP, temp);
+
+	return 0;
+}
+
+static int
+galbrg_enable(int channel)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
+	temp |= 0x00010000;
+	GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP,temp);
+
+	return 0;
+}
+
+static int
+galbrg_disable(int channel)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
+	temp &= 0xFFFEFFFF;
+	GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP,temp);
+
+	return 0;
+}
+
+static int
+galbrg_set_clksrc(int channel, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP);
+	temp &= 0xFF83FFFF;
+	temp |= (value << 18);
+	GT_REG_WRITE_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP,temp);
+
+	return 0;
+}
+
+static int
+galbrg_set_CUV(int channel, int value)
+{
+	GT_REG_WRITE(GALBRG_0_BTREG + (channel * GALBRG_REG_GAP), value);
+
+	return 0;
+}
+
+#if 0
+static int
+galbrg_reset(int channel)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD(GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP));
+	temp |= 0x20000;
+	GT_REG_WRITE(GALBRG_0_CONFREG + (channel * GALBRG_REG_GAP), temp);
+
+	return 0;
+}
+#endif
+
+static int
+galsdma_set_RFT(int channel)
+{
+	unsigned int temp;
+
+        temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+	temp |= 0x00000001;
+	GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+	return 0;
+}
+
+static int
+galsdma_set_SFM(int channel)
+{
+	unsigned int temp;
+
+        temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+	temp |= 0x00000002;
+	GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+	return 0;
+}
+
+static int
+galsdma_set_rxle(int channel)
+{
+	unsigned int temp;
+
+        temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+	temp |= 0x00000040;
+	GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+	return 0;
+}
+
+static int
+galsdma_set_txle(int channel)
+{
+	unsigned int temp;
+
+        temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+	temp |= 0x00000080;
+	GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+	return 0;
+}
+
+static int
+galsdma_set_RC(int channel, unsigned int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+	temp &= ~0x0000003c;
+	temp |= (value << 2);
+	GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF), temp);
+
+	return 0;
+}
+
+static int
+galsdma_set_burstsize(int channel, unsigned int value)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF));
+	temp &= 0xFFFFCFFF;
+	switch (value) {
+	 case 8:
+		GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+			     (temp | (0x3 << 12)));
+		break;
+
+	 case 4:
+		GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+			     (temp | (0x2 << 12)));
+		break;
+
+	 case 2:
+		GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+			     (temp | (0x1 << 12)));
+		break;
+
+	 case 1:
+		GT_REG_WRITE(GALSDMA_0_CONF_REG+(channel*GALSDMA_REG_DIFF),
+			     (temp | (0x0 << 12)));
+		break;
+
+	 default:
+		return -1;
+		break;
+	}
+
+	return 0;
+}
+
+static int
+galmpsc_connect(int channel, int connect)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER);
+
+	if ((channel == 0) && connect)
+		temp &= ~0x00000007;
+	else if ((channel == 1) && connect)
+		temp &= ~(0x00000007 << 6);
+	else if ((channel == 0) && !connect)
+		temp |= 0x00000007;
+	else
+		temp |= (0x00000007 << 6);
+
+	/* Just in case... */
+	temp &= 0x3fffffff;
+
+	GT_REG_WRITE_MIRROR_G(GALMPSC_ROUTING_REGISTER, temp);
+
+	return 0;
+}
+
+static int
+galmpsc_route_serial(int channel, int connect)
+{
+	unsigned int temp;
+
+	temp = GTREGREAD(GALMPSC_SERIAL_MULTIPLEX);
+
+	if ((channel == 0) && connect)
+		temp |= 0x00000100;
+	else if ((channel == 1) && connect)
+		temp |= 0x00001000;
+	else if ((channel == 0) && !connect)
+		temp &= ~0x00000100;
+	else
+		temp &= ~0x00001000;
+
+	GT_REG_WRITE(GALMPSC_SERIAL_MULTIPLEX,temp);
+
+	return 0;
+}
+
+static int
+galmpsc_route_rx_clock(int channel, int brg)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE);
+
+	if (channel == 0)
+		temp |= brg;
+	else
+		temp |= (brg << 8);
+
+	GT_REG_WRITE_MIRROR_G(GALMPSC_RxC_ROUTE,temp);
+
+	return 0;
+}
+
+static int
+galmpsc_route_tx_clock(int channel, int brg)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE);
+
+	if (channel == 0)
+		temp |= brg;
+	else
+		temp |= (brg << 8);
+
+	GT_REG_WRITE_MIRROR_G(GALMPSC_TxC_ROUTE,temp);
+
+	return 0;
+}
+
+static int
+galmpsc_write_config_regs(int mpsc, int mode)
+{
+	if (mode == GALMPSC_UART) {
+		/* Main config reg Low (Null modem, Enable Tx/Rx, UART mode) */
+		GT_REG_WRITE(GALMPSC_MCONF_LOW + (mpsc*GALMPSC_REG_GAP),
+			     0x000004c4);
+
+		/* Main config reg High (32x Rx/Tx clock mode, width=8bits */
+		GT_REG_WRITE(GALMPSC_MCONF_HIGH +(mpsc*GALMPSC_REG_GAP),
+			     0x024003f8);
+		/*        22 2222 1111 */
+		/*        54 3210 9876 */
+		/* 0000 0010 0000 0000 */
+		/*       1 */
+		/*       098 7654 3210 */
+		/* 0000 0011 1111 1000 */
+	} else
+		return -1;
+
+	return 0;
+}
+
+static int
+galmpsc_config_channel_regs(int mpsc)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0);
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_4+(mpsc*GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_5+(mpsc*GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_6+(mpsc*GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_7+(mpsc*GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_8+(mpsc*GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_9+(mpsc*GALMPSC_REG_GAP), 0);
+	GT_REG_WRITE(GALMPSC_CHANNELREG_10+(mpsc*GALMPSC_REG_GAP), 0);
+
+	galmpsc_set_brkcnt(mpsc, 0x3);
+	galmpsc_set_tcschar(mpsc, 0xab);
+
+	return 0;
+}
+
+static int
+galmpsc_set_brkcnt(int mpsc, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
+	temp &= 0x0000FFFF;
+	temp |= (value << 16);
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, temp);
+
+	return 0;
+}
+
+static int
+galmpsc_set_tcschar(int mpsc, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
+	temp &= 0xFFFF0000;
+	temp |= value;
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, temp);
+
+	return 0;
+}
+
+static int
+galmpsc_set_char_length(int mpsc, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
+	temp &= 0xFFFFCFFF;
+	temp |= (value << 12);
+	GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP, temp);
+
+	return 0;
+}
+
+static int
+galmpsc_set_stop_bit_length(int mpsc, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
+	temp |= (value << 14);
+	GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP,temp);
+
+	return 0;
+}
+
+static int
+galmpsc_set_parity(int mpsc, int value)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+	if (value != -1) {
+		temp &= 0xFFF3FFF3;
+		temp |= ((value << 18) | (value << 2));
+		temp |= ((value << 17) | (value << 1));
+	} else {
+		temp &= 0xFFF1FFF1;
+	}
+
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, temp);
+
+	return 0;
+}
+
+static int
+galmpsc_enter_hunt(int mpsc)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	int temp;
+
+	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+	temp |= 0x80000000;
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, temp);
+
+	/* Should Poll on Enter Hunt bit, but the register is write-only */
+	/* errata suggests pausing 100 system cycles */
+	udelay(100);
+
+	return 0;
+}
+
+
+static int
+galmpsc_shutdown(int mpsc)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	unsigned int temp;
+
+	/* cause RX abort (clears RX) */
+	temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
+	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
+	temp &= ~MPSC_ENTER_HUNT;
+	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP,temp);
+
+	GT_REG_WRITE(GALSDMA_0_COM_REG, 0);
+	GT_REG_WRITE(GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+
+	/* shut down the MPSC */
+	GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
+	GT_REG_WRITE(GALMPSC_MCONF_HIGH, 0);
+	GT_REG_WRITE_MIRROR(GALMPSC_PROTOCONF_REG, mpsc, GALMPSC_REG_GAP,0);
+
+	udelay(100);
+
+	/* shut down the sdma engines. */
+	/* reset config to default */
+	GT_REG_WRITE(GALSDMA_0_CONF_REG, 0x000000fc);
+
+	udelay(100);
+
+	/* clear the SDMA current and first TX and RX pointers */
+	GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR, 0);
+	GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR, 0);
+	GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR, 0);
+
+	udelay(100);
+
+	return 0;
+}
+
+static void
+galsdma_enable_rx(void)
+{
+	int temp;
+
+	/* Enable RX processing */
+	temp = GTREGREAD(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF));
+	temp |= RX_ENABLE;
+	GT_REG_WRITE(GALSDMA_0_COM_REG+(CHANNEL*GALSDMA_REG_DIFF), temp);
+
+	galmpsc_enter_hunt(CHANNEL);
+}
+
+static int
+galmpsc_set_snoop(int mpsc, int value)
+{
+	int reg = mpsc ? MPSC_1_ADDRESS_CONTROL_LOW : MPSC_0_ADDRESS_CONTROL_LOW;
+	int temp=GTREGREAD(reg);
+	if(value)
+	    temp |= (1<< 6) | (1<<14) | (1<<22) | (1<<30);
+	else
+	    temp &= ~((1<< 6) | (1<<14) | (1<<22) | (1<<30));
+	GT_REG_WRITE(reg, temp);
+	return 0;
+}
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
new file mode 100644
index 00000000000..10c484576b3
--- /dev/null
+++ b/board/evb64260/zuma_pbb.c
@@ -0,0 +1,200 @@
+#include <common.h>
+#include <malloc.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#include <command.h>
+#include <cmd_bsp.h>
+#endif
+
+#include <pci.h>
+#include <galileo/pci.h>
+#include "zuma_pbb.h"
+
+#undef DEBUG
+
+#define PAT_LO 0x00010203
+#define PAT_HI 0x04050607
+
+static PBB_DMA_REG_MAP *zuma_pbb_reg = NULL;
+
+static char test_buf1[2048];
+static char test_buf2[2048];
+
+int zuma_test_dma (int cmd, int size)
+{
+	static const char *const test_legend[] = {
+		"write", "verify",
+		"copy", "compare",
+		"write inc", "verify inc"
+	};
+	register int i, j;
+	unsigned int p1 = ((unsigned int) test_buf1 + 0xff) & (~0xff);
+	unsigned int p2 = ((unsigned int) test_buf2 + 0xff) & (~0xff);
+	volatile unsigned int *ps = (unsigned int *) p1;
+	volatile unsigned int *pd = (unsigned int *) p2;
+	unsigned int funct, pat_lo = PAT_LO, pat_hi = PAT_HI;
+	DMA_INT_STATUS stat;
+	int ret = 0;
+
+	if (!zuma_pbb_reg) {
+		printf ("not initted\n");
+		return -1;
+	}
+
+	if (cmd < 0 || cmd > 5) {
+		printf ("inv cmd %d\n", cmd);
+		return -1;
+	}
+
+	if (cmd == 2 || cmd == 3) {
+		/* not implemented */
+		return 0;
+	}
+
+	if (size <= 0 || size > 1024)
+		size = 1024;
+
+	size &= (~7);				/* throw away bottom 3 bits */
+
+	p1 = ((unsigned int) test_buf1 + 0xff) & (~0xff);
+	p2 = ((unsigned int) test_buf2 + 0xff) & (~0xff);
+
+	memset ((void *) p1, 0, size);
+	memset ((void *) p2, 0, size);
+
+	for (i = 0; i < size / 4; i += 2) {
+		ps[i] = pat_lo;
+		ps[i + 1] = pat_hi;
+		if (cmd == 4 || cmd == 5) {
+			unsigned char *pl = (unsigned char *) &pat_lo;
+			unsigned char *ph = (unsigned char *) &pat_hi;
+
+			for (j = 0; j < 4; j++) {
+				pl[j] += 8;
+				ph[j] += 8;
+			}
+		}
+	}
+
+	funct = (1 << 31) | (cmd << 24) | (size);
+
+	zuma_pbb_reg->int_mask.pci_bits.chan0 =
+			EOF_RX_FLAG | EOF_TX_FLAG | EOB_TX_FLAG;
+
+	zuma_pbb_reg->debug_57 = PAT_LO;	/* patl */
+	zuma_pbb_reg->debug_58 = PAT_HI;	/* path */
+
+	zuma_pbb_reg->debug_54 = cpu_to_le32 (p1);	/* src 0x01b0 */
+	zuma_pbb_reg->debug_55 = cpu_to_le32 (p2);	/* dst 0x01b8 */
+	zuma_pbb_reg->debug_56 = cpu_to_le32 (funct);	/* func, 0x01c0 */
+
+	/* give DMA time to chew on things.. dont use DRAM or PCI */
+	/* if you can avoid it. */
+	do {
+		for (i = 0; i < 1000 * 10; i++);
+	} while (le32_to_cpu (zuma_pbb_reg->debug_56) & (1 << 31));
+
+	stat.word = zuma_pbb_reg->status.word;
+	zuma_pbb_reg->int_mask.word = 0;
+
+	printf ("stat: %08x (%x)\n", stat.word, stat.pci_bits.chan0);
+
+	printf ("func: %08x\n", le32_to_cpu (zuma_pbb_reg->debug_56));
+	printf ("src @%08x: %08x %08x %08x %08x\n", p1, ps[0], ps[1], ps[2],
+			ps[3]);
+	printf ("dst @%08x: %08x %08x %08x %08x\n", p2, pd[0], pd[1], pd[2],
+			pd[3]);
+	printf ("func: %08x\n", le32_to_cpu (zuma_pbb_reg->debug_56));
+
+
+	if (cmd == 0 || cmd == 4) {
+		/* this is a write */
+		if (!(stat.pci_bits.chan0 & EOF_RX_FLAG) ||	/* not done */
+			(memcmp ((void *) ps, (void *) pd, size) != 0)) {	/* cmp error */
+			for (i = 0; i < size / 4; i += 2) {
+				if ((ps[i] != pd[i]) || (ps[i + 1] != pd[i + 1])) {
+					printf ("s @%p:%08x %08x\n", &ps[i], ps[i], ps[i + 1]);
+					printf ("d @%p:%08x %08x\n", &pd[i], pd[i], pd[i + 1]);
+				}
+			}
+			ret = -1;
+		}
+	} else {
+		/* this is a verify */
+		if (!(stat.pci_bits.chan0 & EOF_TX_FLAG) ||	/* not done */
+			(stat.pci_bits.chan0 & EOB_TX_FLAG)) {	/* cmp error */
+			printf ("%08x: %08x %08x\n",
+					le32_to_cpu (zuma_pbb_reg->debug_63),
+					zuma_pbb_reg->debug_61, zuma_pbb_reg->debug_62);
+			ret = -1;
+		}
+	}
+
+	printf ("%s cmd %d, %d bytes: %s!\n", test_legend[cmd], cmd, size,
+			(ret == 0) ? "PASSED" : "FAILED");
+	return 0;
+}
+
+void zuma_init_pbb (void)
+{
+	unsigned int iobase;
+	pci_dev_t dev =
+			pci_find_device (VENDOR_ID_ZUMA, DEVICE_ID_ZUMA_PBB, 0);
+
+	if (dev == -1) {
+		printf ("no zuma pbb\n");
+		return;
+	}
+
+	pci_read_config_dword (dev, PCI_BASE_ADDRESS_0, &iobase);
+
+	zuma_pbb_reg =
+			(PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+
+	if (!zuma_pbb_reg) {
+		printf ("zuma pbb bar none! (hah hah, get it?)\n");
+		return;
+	}
+
+	zuma_pbb_reg->int_mask.word = 0;
+
+	printf ("pbb @ %p v%d.%d, timestamp %08x\n", zuma_pbb_reg,
+			zuma_pbb_reg->version.pci_bits.rev_major,
+			zuma_pbb_reg->version.pci_bits.rev_minor,
+			zuma_pbb_reg->timestamp);
+
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+
+static int last_cmd = 4;		/* write increment */
+static int last_size = 64;
+
+int
+do_zuma_init_pbb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	zuma_init_pbb ();
+	return 0;
+}
+
+int
+do_zuma_test_dma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (argc > 1) {
+		last_cmd = simple_strtoul (argv[1], NULL, 10);
+	}
+	if (argc > 2) {
+		last_size = simple_strtoul (argv[2], NULL, 10);
+	}
+	zuma_test_dma (last_cmd, last_size);
+	return 0;
+}
+
+int
+do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	zuma_mbox_init ();
+	return 0;
+}
+
+#endif /* CFG_CMD_BSP */
diff --git a/board/evb64260/zuma_pbb_mbox.c b/board/evb64260/zuma_pbb_mbox.c
new file mode 100644
index 00000000000..5131339a6c9
--- /dev/null
+++ b/board/evb64260/zuma_pbb_mbox.c
@@ -0,0 +1,187 @@
+#include <common.h>
+#include <galileo/pci.h>
+#include <net.h>
+#include <pci.h>
+
+#include "zuma_pbb.h"
+#include "zuma_pbb_mbox.h"
+
+
+struct _zuma_mbox_dev zuma_mbox_dev;
+
+
+static int zuma_mbox_write(struct _zuma_mbox_dev *dev, unsigned int data)
+{
+  unsigned int status, count = 0, i;
+
+  status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+
+  while((status & OUT_PENDING) && count < 1000) {
+    count++;
+    for(i=0;i<1000;i++);
+    status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+  }
+  if(count < 1000) {
+    /* if SET it means msg pending */
+    /* printf("mbox real write %08x\n",data); */
+    dev->sip->mbox_out = cpu_to_le32(data);
+    return 4;
+  }
+
+  printf("mbox tx timeout\n");
+  return 0;
+}
+
+static int zuma_mbox_read(struct _zuma_mbox_dev *dev, unsigned int *data)
+{
+  unsigned int status, count = 0, i;
+
+  status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+
+  while(!(status & IN_VALID) && count < 1000) {
+    count++;
+    for(i=0;i<1000;i++);
+    status = (volatile int)le32_to_cpu(dev->sip->mbox_status);
+  }
+  if(count < 1000) {
+    /* if SET it means msg pending */
+    *data=le32_to_cpu(dev->sip->mbox_in);
+    /*printf("mbox real read %08x\n", *data); */
+    return 4;
+  }
+  printf("mbox rx timeout\n");
+  return 0;
+}
+
+static int zuma_mbox_do_one_mailbox(unsigned int out, unsigned int *in)
+{
+  int ret;
+  ret=zuma_mbox_write(&zuma_mbox_dev,out);
+  /*printf("write 0x%08x (%d bytes)\n", out, ret); */
+  if(ret!=4) return -1;
+  ret=zuma_mbox_read(&zuma_mbox_dev,in);
+  /*printf("read 0x%08x (%d bytes)\n", *in, ret); */
+  if(ret!=4) return -1;
+  return 0;
+}
+
+
+#define RET_IF_FAILED(x)	if ((x) == -1) return -1
+
+static int zuma_mbox_do_all_mailbox(void)
+{
+  unsigned int data_in;
+  unsigned short sdata_in;
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_START, &data_in));
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_MACL, &data_in));
+  memcpy(zuma_acc_mac+2,&data_in,4);
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_MACH, &data_in));
+  sdata_in=data_in&0xffff;
+  memcpy(zuma_acc_mac,&sdata_in,2);
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_IP, &data_in));
+  zuma_ip=data_in;
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_SLOT, &data_in));
+  zuma_slot_bac=data_in>>3;
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_BAUD, &data_in));
+  zuma_console_baud = data_in & 0xffff;
+  zuma_debug_baud   = data_in >> 16;
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_ENG_PRV_MACL, &data_in));
+  memcpy(zuma_prv_mac+2,&data_in,4);
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_ENG_PRV_MACH, &data_in));
+  sdata_in=data_in&0xffff;
+  memcpy(zuma_prv_mac,&sdata_in,2);
+
+  RET_IF_FAILED(zuma_mbox_do_one_mailbox(ZUMA_MBOXMSG_DONE, &data_in));
+
+  return 0;
+}
+
+
+static void
+zuma_mbox_dump(void)
+{
+  printf("ACC MAC=%04x%08x\n",*(unsigned short *)(&zuma_acc_mac),*(unsigned int *)((char *)&zuma_acc_mac+2));
+  printf("PRV MAC=%04x%08x\n",*(unsigned short *)(&zuma_prv_mac),*(unsigned int *)((char *)&zuma_prv_mac+2));
+  printf("slot:bac=%d:%d\n",(zuma_slot_bac>>2)&0xf, zuma_slot_bac & 0x3);
+  printf("BAUD1=%d BAUD2=%d\n",zuma_console_baud,zuma_debug_baud);
+}
+
+
+static void
+zuma_mbox_setenv(void)
+{
+  unsigned char *data, buf[32];
+  unsigned char save = 0;
+
+  data = getenv("baudrate");
+
+  if(!data || (zuma_console_baud != simple_strtoul(data, NULL, 10))) {
+    sprintf(buf, "%6d", zuma_console_baud);
+    setenv("baudrate", buf);
+    save=1;
+    printf("baudrate doesn't match from mbox\n");
+  }
+
+  ip_to_string(zuma_ip, buf);
+  setenv("ipaddr", buf);
+
+  sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
+	  zuma_prv_mac[0],
+	  zuma_prv_mac[1],
+	  zuma_prv_mac[2],
+	  zuma_prv_mac[3],
+	  zuma_prv_mac[4],
+	  zuma_prv_mac[5]);
+  setenv("ethaddr", buf);
+
+  sprintf(buf,"%02x",zuma_slot_bac);
+  setenv("bacslot", buf);
+
+  if(save)
+    saveenv();
+}
+
+/**
+ * 	zuma_mbox_init:
+ */
+
+int zuma_mbox_init(void)
+{
+  unsigned int iobase;
+  memset(&zuma_mbox_dev, 0, sizeof(struct _zuma_mbox_dev));
+
+  zuma_mbox_dev.dev = pci_find_device(VENDOR_ID_ZUMA, DEVICE_ID_ZUMA_PBB, 0);
+
+  if(zuma_mbox_dev.dev == -1) {
+    printf("no zuma pbb\n");
+    return -1;
+  }
+
+  pci_read_config_dword(zuma_mbox_dev.dev, PCI_BASE_ADDRESS_0, &iobase);
+
+  zuma_mbox_dev.sip = (PBB_DMA_REG_MAP *) (iobase & PCI_BASE_ADDRESS_MEM_MASK);
+
+  zuma_mbox_dev.sip->int_mask.word=0;
+
+  printf("pbb @ %p v%d.%d, timestamp %08x\n", zuma_mbox_dev.sip,
+	 zuma_mbox_dev.sip->version.pci_bits.rev_major,
+	 zuma_mbox_dev.sip->version.pci_bits.rev_minor,
+	 zuma_mbox_dev.sip->timestamp);
+
+  if (zuma_mbox_do_all_mailbox() == -1) {
+	  printf("mailbox failed.. no ACC?\n");
+	  return -1;
+  }
+
+  zuma_mbox_dump();
+
+  zuma_mbox_setenv();
+
+  return 0;
+}
diff --git a/board/fads/fads.c b/board/fads/fads.c
new file mode 100644
index 00000000000..3b97f51f233
--- /dev/null
+++ b/board/fads/fads.c
@@ -0,0 +1,876 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+#include "fads.h"
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+#if defined(CONFIG_DRAM_50MHZ)
+/* 50MHz tables */
+const uint dram_60ns[] =
+{ 0x8fffec24, 0x0fffec04, 0x0cffec04, 0x00ffec04,
+  0x00ffec00, 0x37ffec47, 0xffffffff, 0xffffffff,
+  0x8fffec24, 0x0fffec04, 0x08ffec04, 0x00ffec0c,
+  0x03ffec00, 0x00ffec44, 0x00ffcc08, 0x0cffcc44,
+  0x00ffec0c, 0x03ffec00, 0x00ffec44, 0x00ffcc00,
+  0x3fffc847, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
+  0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint dram_70ns[] =
+{ 0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
+  0x00ffcc00, 0x37ffcc47, 0xffffffff, 0xffffffff,
+  0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
+  0x00ffcc08, 0x0cffcc44, 0x00ffec0c, 0x03ffec00,
+  0x00ffec44, 0x00ffcc08, 0x0cffcc44, 0x00ffec04,
+  0x00ffec00, 0x3fffec47, 0xffffffff, 0xffffffff,
+  0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
+  0x7fffcc06, 0xffffcc85, 0xffffcc05, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_60ns[] =
+{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
+  0x00f3ec00, 0x37f7ec47, 0xffffffff, 0xffffffff,
+  0x8fffec24, 0x0ffbec04, 0x0cf3ec04, 0x00f3ec0c,
+  0x0cf3ec00, 0x00f3ec4c, 0x0cf3ec00, 0x00f3ec4c,
+  0x0cf3ec00, 0x00f3ec44, 0x03f3ec00, 0x3ff7ec47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
+  0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_70ns[] =
+{ 0x8ffbcc24, 0x0ff3cc04, 0x0cf3cc04, 0x00f3cc04,
+  0x00f3cc00, 0x37f7cc47, 0xffffffff, 0xffffffff,
+  0x8fffcc24, 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc0c,
+  0x03f3cc00, 0x00f3cc44, 0x00f3ec0c, 0x0cf3ec00,
+  0x00f3ec4c, 0x03f3ec00, 0x00f3ec44, 0x00f3cc00,
+  0x33f7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
+  0x0cafcc00, 0x33bfcc47, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
+  0x7fffcc04, 0xffffcc86, 0xffffcc05, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+#elif defined(CONFIG_DRAM_25MHZ)
+
+/* 25MHz tables */
+
+const uint dram_60ns[] =
+{ 0x0fffcc04, 0x08ffcc00, 0x33ffcc47, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
+  0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
+  0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+  0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+  0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint dram_70ns[] =
+{ 0x0fffec04, 0x08ffec04, 0x00ffec00, 0x3fffcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
+  0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
+  0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+  0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
+  0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_60ns[] =
+{ 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0ffbcc04, 0x09f3cc0c, 0x09f3cc0c, 0x09f3cc0c,
+  0x08f3cc00, 0x3ff7cc47, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fefcc04, 0x08afcc00, 0x07afcc48, 0x08afcc48,
+  0x08afcc48, 0x39bfcc47, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+const uint edo_70ns[] =
+{ 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0ffbec04, 0x08f3ec04, 0x03f3ec48, 0x08f3cc00,
+  0x0ff3cc4c, 0x08f3cc00, 0x0ff3cc4c, 0x08f3cc00,
+  0x3ff7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x0fefcc04, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
+  0x07afcc4c, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
+  0x37bfcc47, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+
+
+#else
+#error dram not correct defined - use CONFIG_DRAM_25MHZ or CONFIG_DRAM_50MHZ
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	uint k;
+
+	puts ("Board: ");
+
+#ifdef CONFIG_FADS
+	k = (*((uint *)BCSR3) >> 24) & 0x3f;
+
+	switch(k) {
+	case 0x03 :
+	case 0x20 :
+	case 0x21 :
+	case 0x22 :
+	case 0x23 :
+	case 0x24 :
+	case 0x3f :
+		puts ("FADS");
+		break;
+
+	default :
+		printf("unknown board (0x%02x)\n", k);
+		return -1;
+	}
+
+	printf(" with db ");
+
+	switch(k) {
+	case 0x03 :
+		puts ("MPC823");
+		break;
+	case 0x20 :
+		puts ("MPC801");
+		break;
+	case 0x21 :
+		puts ("MPC850");
+		break;
+	case 0x22 :
+		puts ("MPC821, MPC860 / MPC860SAR / MPC860T");
+		break;
+	case 0x23 :
+		puts ("MPC860SAR");
+		break;
+	case 0x24 :
+		puts ("MPC860T");
+		break;
+	case 0x3f :
+		puts ("MPC850SAR");
+		break;
+	}
+
+	printf(" rev ");
+
+	k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
+	  | (((*((uint *)BCSR3) >> 19) & 1) << 2)
+	  | (((*((uint *)BCSR3) >> 16) & 3));
+
+	switch(k) {
+	case 0x01 :
+		puts ("ENG or PILOT\n");
+		break;
+
+	default:
+		printf("unknown (0x%x)\n", k);
+		return -1;
+	}
+
+	return 0;
+#endif	/* CONFIG_FADS */
+
+#ifdef CONFIG_ADS
+  printf("ADS rev ");
+
+  k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
+    | (((*((uint *)BCSR3) >> 19) & 1) << 2)
+    | (((*((uint *)BCSR3) >> 16) & 3));
+
+  switch(k) {
+  case 0x00 : puts ("ENG - this board sucks, check the errata, not supported\n");
+              return -1;
+  case 0x01 : puts ("PILOT - warning, read errata \n"); break;
+  case 0x02 : puts ("A - warning, read errata \n"); break;
+  case 0x03 : puts ("B \n"); break;
+  default   : printf ("unknown revision (0x%x)\n", k); return -1;
+  }
+
+  return 0;
+#endif	/* CONFIG_ADS */
+
+}
+
+/* ------------------------------------------------------------------------- */
+int _draminit(uint base, uint noMbytes, uint edo, uint delay)
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	/* init upm */
+
+	switch(delay)
+	{
+		case 70:
+		{
+			if(edo)
+			{
+				upmconfig(UPMA, (uint *) edo_70ns, sizeof(edo_70ns)/sizeof(uint));
+			}
+			else
+			{
+				upmconfig(UPMA, (uint *) dram_70ns, sizeof(dram_70ns)/sizeof(uint));
+			}
+
+			break;
+		}
+
+		case 60:
+		{
+			if(edo)
+			{
+				upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
+			}
+			else
+			{
+				upmconfig(UPMA, (uint *) dram_60ns, sizeof(dram_60ns)/sizeof(uint));
+			}
+
+			break;
+		}
+
+		default :
+			return -1;
+	}
+
+	memctl->memc_mptpr = 0x0400; /* divide by 16 */
+
+	switch(noMbytes)
+	{
+
+		case 8:  /* 8 Mbyte uses both CS3 and CS2 */
+		{
+			memctl->memc_mamr = 0x13a01114;
+			memctl->memc_or3 = 0xffc00800;
+			memctl->memc_br3 = 0x00400081 + base;
+			memctl->memc_or2 = 0xffc00800;
+			break;
+		}
+
+		case 4: /* 4 Mbyte uses only CS2 */
+		{
+			memctl->memc_mamr = 0x13a01114;
+			memctl->memc_or2 = 0xffc00800;
+			break;
+		}
+
+		case 32: /* 32 Mbyte uses both CS3 and CS2 */
+		{
+			memctl->memc_mamr = 0x13b01114;
+			memctl->memc_or3 = 0xff000800;
+			memctl->memc_br3 = 0x01000081 + base;
+			memctl->memc_or2 = 0xff000800;
+			break;
+		}
+
+		case 16: /* 16 Mbyte uses only CS2 */
+		{
+#ifdef CONFIG_ADS
+			memctl->memc_mamr = 0x60b21114;
+#else
+			memctl->memc_mamr = 0x13b01114;
+#endif
+			memctl->memc_or2 = 0xff000800;
+			break;
+		}
+
+		default:
+		    return -1;
+	}
+
+	memctl->memc_br2 = 0x81 + base;     /* use upma */
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void _dramdisable(void)
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_br2 = 0x00000000;
+	memctl->memc_br3 = 0x00000000;
+
+	/* maybe we should turn off upma here or something */
+}
+
+#if defined(CONFIG_SDRAM_100MHZ)
+
+/* ------------------------------------------------------------------------- */
+/* sdram table by Dan Malek                                                  */
+
+/* This has the stretched early timing so the 50 MHz
+ * processor can make the 100 MHz timing.  This will
+ * work at all processor speeds.
+ */
+
+#define SDRAM_MPTPRVALUE 0x0400
+
+#define SDRAM_MBMRVALUE0 0xc3802114  /* (16-14) 50 MHz */
+#define SDRAM_MBMRVALUE1 SDRAM_MBMRVALUE0
+
+#define SDRAM_OR4VALUE   0xffc00a00
+#define SDRAM_BR4VALUE   0x000000c1   /* base address will be or:ed on */
+
+#define SDRAM_MARVALUE   0x88
+
+#define SDRAM_MCRVALUE0  0x80808111   /* run pattern 0x11 */
+#define SDRAM_MCRVALUE1  SDRAM_MCRVALUE0
+
+
+const uint sdram_table[] =
+{
+	/* single read. (offset 0 in upm RAM) */
+	0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x11adfc04,
+	0xefbbbc00, 0x1ff77c45, 0xffffffff, 0xffffffff,
+
+	/* burst read. (offset 8 in upm RAM) */
+	0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x10adfc04,
+	0xf0affc00, 0xf0affc00, 0xf1affc00, 0xefbbbc00,
+	0x1ff77c45, 0xeffbbc04, 0x1ff77c34, 0xefeabc34,
+	0x1fb57c35, 0xffffffff, 0xffffffff, 0xffffffff,
+
+	/* single write. (offset 18 in upm RAM) */
+	0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x01b93c04,
+	0x1ff77c45, 0xffffffff, 0xffffffff, 0xffffffff,
+
+	/* burst write. (offset 20 in upm RAM) */
+	0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x10ad7c00,
+	0xf0affc00, 0xf0affc00, 0xe1bbbc04, 0x1ff77c45,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+
+	/* refresh. (offset 30 in upm RAM) */
+	0xeffafc84, 0x1ff5fc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, 0xffffffff, 0xffffffff,
+	0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+
+	/* exception. (offset 3c in upm RAM) */
+	0xeffffc06, 0x1ffffc07, 0xffffffff, 0xffffffff };
+
+#elif defined(CONFIG_SDRAM_50MHZ)
+
+/* ------------------------------------------------------------------------- */
+/* sdram table stolen from the fads manual                                   */
+/* for chip MB811171622A-100                                                 */
+
+/* this table is for 32-50MHz operation */
+
+#define _not_used_ 0xffffffff
+
+#define SDRAM_MPTPRVALUE 0x0400
+
+#define SDRAM_MBMRVALUE0 0x80802114   /* refresh at 32MHz */
+#define SDRAM_MBMRVALUE1 0x80802118
+
+#define SDRAM_OR4VALUE   0xffc00a00
+#define SDRAM_BR4VALUE   0x000000c1   /* base address will be or:ed on */
+
+#define SDRAM_MARVALUE   0x88
+
+#define SDRAM_MCRVALUE0  0x80808105
+#define SDRAM_MCRVALUE1  0x80808130
+
+const uint sdram_table[] =
+{
+	/* single read. (offset 0 in upm RAM) */
+	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+	0x1ff77c47,
+
+	/* MRS initialization (offset 5) */
+
+	0x1ff77c34, 0xefeabc34, 0x1fb57c35,
+
+	/* burst read. (offset 8 in upm RAM) */
+	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* single write. (offset 18 in upm RAM) */
+	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* burst write. (offset 20 in upm RAM) */
+	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* refresh. (offset 30 in upm RAM) */
+	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* exception. (offset 3c in upm RAM) */
+	0x7ffffc07, _not_used_, _not_used_, _not_used_ };
+
+/* ------------------------------------------------------------------------- */
+#else
+#error SDRAM not correctly configured
+#endif
+
+int _initsdram(uint base, uint noMbytes)
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	if(noMbytes != 4)
+	{
+		return -1;
+	}
+
+	upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
+
+	memctl->memc_mptpr = SDRAM_MPTPRVALUE;
+
+	/* Configure the refresh (mostly).  This needs to be
+	* based upon processor clock speed and optimized to provide
+	* the highest level of performance.  For multiple banks,
+	* this time has to be divided by the number of banks.
+	* Although it is not clear anywhere, it appears the
+	* refresh steps through the chip selects for this UPM
+	* on each refresh cycle.
+	* We have to be careful changing
+	* UPM registers after we ask it to run these commands.
+	*/
+
+	memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+	memctl->memc_mar = SDRAM_MARVALUE;  /* MRS code */
+
+	udelay(200);
+
+	/* Now run the precharge/nop/mrs commands.
+	*/
+
+	memctl->memc_mcr = 0x80808111;   /* run pattern 0x11 */
+
+	udelay(200);
+
+	/* Run 8 refresh cycles */
+
+	memctl->memc_mcr = SDRAM_MCRVALUE0;
+
+	udelay(200);
+
+	memctl->memc_mbmr = SDRAM_MBMRVALUE1;
+	memctl->memc_mcr = SDRAM_MCRVALUE1;
+
+	udelay(200);
+
+	memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+
+	memctl->memc_or4 = SDRAM_OR4VALUE;
+	memctl->memc_br4 = SDRAM_BR4VALUE | base;
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+void _sdramdisable(void)
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_br4 = 0x00000000;
+
+	/* maybe we should turn off upmb here or something */
+}
+
+/* ------------------------------------------------------------------------- */
+
+int initsdram(uint base, uint *noMbytes)
+{
+	uint m = 4;
+
+	*((uint *)BCSR1) |= BCSR1_SDRAM_EN; /* enable sdram */
+								  /* _fads_sdraminit needs access to sdram */
+	*noMbytes = m;
+
+	if(!_initsdram(base, m))
+	{
+
+		return 0;
+	}
+	else
+	{
+		*((uint *)BCSR1) &= ~BCSR1_SDRAM_EN; /* disable sdram */
+
+		_sdramdisable();
+
+		return -1;
+	}
+}
+
+long int initdram (int board_type)
+{
+#ifdef CONFIG_ADS
+	/* ADS: has no SDRAM, so start DRAM at 0 */
+	uint base = (unsigned long)0x0;
+#else
+	/* FADS: has 4MB SDRAM, put DRAM above it */
+	uint base = (unsigned long)0x00400000;
+#endif
+	uint k, m, s;
+
+	k = (*((uint *)BCSR2) >> 23) & 0x0f;
+
+	m = 0;
+
+	switch(k & 0x3)
+	{
+		/* "MCM36100 / MT8D132X" */
+		case 0x00 :
+			m = 4;
+			break;
+
+		/* "MCM36800 / MT16D832X" */
+		case 0x01 :
+			m = 32;
+			break;
+		/* "MCM36400 / MT8D432X" */
+		case 0x02 :
+			m = 16;
+			break;
+		/* "MCM36200 / MT16D832X ?" */
+		case 0x03 :
+			m = 8;
+			break;
+
+	}
+
+	switch(k >> 2)
+	{
+		case 0x02 :
+			k = 70;
+			break;
+
+		case 0x03 :
+			k = 60;
+			break;
+
+		default :
+			printf("unknown dramdelay (0x%x) - defaulting to 70 ns", k);
+			k = 70;
+	}
+
+#ifdef CONFIG_FADS
+	/* the FADS is missing this bit, all rams treated as non-edo */
+	s = 0;
+#else
+	s = (*((uint *)BCSR2) >> 27) & 0x01;
+#endif
+
+	if(!_draminit(base, m, s, k))
+	{
+#ifdef CONFIG_FADS
+		uint	sdramsz;
+#endif
+		*((uint *)BCSR1) &= ~BCSR1_DRAM_EN;  /* enable dram */
+
+#ifdef CONFIG_FADS
+		if (!initsdram(0x00000000, &sdramsz)) {
+				m += sdramsz;
+				printf("(%u MB SDRAM) ", sdramsz);
+		} else {
+				_dramdisable();
+
+				/********************************
+				*DRAM ERROR, HALT PROCESSOR
+				*********************************/
+				while(1);
+
+				return -1;
+		}
+#endif
+
+		return (m << 20);
+	}
+	else
+	{
+		_dramdisable();
+
+		/********************************
+		*DRAM ERROR, HALT PROCESSOR
+		*********************************/
+		while(1);
+
+		return -1;
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+    /* TODO: XXX XXX XXX */
+    printf ("test: 16 MB - ok\n");
+
+    return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+	volatile pcmconf8xx_t	*pcmp;
+	uint v, slota, slotb;
+
+	/*
+	** Enable the PCMCIA for a Flash card.
+	*/
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+#if 0
+	pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR;
+	pcmp->pcmc_por0 = 0xc00ff05d;
+#endif
+
+	/* Set all slots to zero by default. */
+	pcmp->pcmc_pgcra = 0;
+	pcmp->pcmc_pgcrb = 0;
+#ifdef PCMCIA_SLOT_A
+	pcmp->pcmc_pgcra = 0x40;
+#endif
+#ifdef PCMCIA_SLOT_B
+	pcmp->pcmc_pgcrb = 0x40;
+#endif
+
+	/* enable PCMCIA buffers */
+	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
+
+	/* Check if any PCMCIA card is plugged in. */
+
+	slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
+	slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
+
+	if (!(slota || slotb))
+	{
+		printf("No card present\n");
+#ifdef PCMCIA_SLOT_A
+		pcmp->pcmc_pgcra = 0;
+#endif
+#ifdef PCMCIA_SLOT_B
+		pcmp->pcmc_pgcrb = 0;
+#endif
+		return -1;
+	}
+	else
+		printf("Card present (");
+
+	v = 0;
+
+	/* both the ADS and the FADS have a 5V keyed pcmcia connector (?)
+	**
+	** Paolo - Yes, but i have to insert some 3.3V card in that slot on
+	**	   my FADS... :-)
+	*/
+
+#if defined(CONFIG_MPC860)
+	switch( (pcmp->pcmc_pipr >> 30) & 3 )
+#elif defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
+	switch( (pcmp->pcmc_pipr >> 14) & 3 )
+#endif
+	{
+		case 0x00 :
+			printf("5V");
+			v = 5;
+			break;
+		case 0x01 :
+			printf("5V and 3V");
+#ifdef CONFIG_FADS
+			v = 3; /* User lower voltage if supported! */
+#else
+			v = 5;
+#endif
+			break;
+		case 0x03 :
+			printf("5V, 3V and x.xV");
+#ifdef CONFIG_FADS
+			v = 3; /* User lower voltage if supported! */
+#else
+			v = 5;
+#endif
+			break;
+	}
+
+	switch(v){
+#ifdef CONFIG_FADS
+	case 3:
+	    printf("; using 3V");
+	    /*
+	    ** Enable 3 volt Vcc.
+	    */
+	    *((uint *)BCSR1) &= ~BCSR1_PCCVCC1;
+	    *((uint *)BCSR1) |= BCSR1_PCCVCC0;
+	    break;
+#endif
+	case 5:
+	    printf("; using 5V");
+#ifdef CONFIG_ADS
+	    /*
+	    ** Enable 5 volt Vcc.
+	    */
+	    *((uint *)BCSR1) &= ~BCSR1_PCCVCCON;
+#endif
+#ifdef CONFIG_FADS
+	    /*
+	    ** Enable 5 volt Vcc.
+	    */
+	    *((uint *)BCSR1) &= ~BCSR1_PCCVCC0;
+	    *((uint *)BCSR1) |= BCSR1_PCCVCC1;
+#endif
+	    break;
+
+	default:
+		*((uint *)BCSR1) |= BCSR1_PCCEN;  /* disable pcmcia */
+
+		printf("; unknown voltage");
+		return -1;
+	}
+	printf(")\n");
+	/* disable pcmcia reset after a while */
+
+	udelay(20);
+
+#ifdef MPC860
+	pcmp->pcmc_pgcra = 0;
+#elif MPC823
+	pcmp->pcmc_pgcrb = 0;
+#endif
+
+	/* If you using a real hd you should give a short
+	* spin-up time. */
+#ifdef CONFIG_DISK_SPINUP_TIME
+	udelay(CONFIG_DISK_SPINUP_TIME);
+#endif
+
+	return 0;
+}
+
+#endif	/* CFG_CMD_PCMCIA */
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CFG_PC_IDE_RESET
+
+void ide_set_reset(int on)
+{
+	volatile immap_t *immr = (immap_t *)CFG_IMMR;
+
+	/*
+	 * Configure PC for IDE Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+	} else {		/* release RESET */
+		immr->im_ioport.iop_pcdat |=   CFG_PC_IDE_RESET;
+	}
+
+	/* program port pin as GPIO output */
+	immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
+	immr->im_ioport.iop_pcso  &= ~(CFG_PC_IDE_RESET);
+	immr->im_ioport.iop_pcdir |=   CFG_PC_IDE_RESET;
+}
+
+#endif	/* CFG_PC_IDE_RESET */
+/* ------------------------------------------------------------------------- */
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c
new file mode 100644
index 00000000000..8f32ad74b05
--- /dev/null
+++ b/board/genietv/genietv.c
@@ -0,0 +1,375 @@
+/*
+ * genietv/genietv.c
+ *
+ * The GENIETV is using the following physical memorymap (copied from
+ * the FADS configuration):
+ *
+ * ff020000 -> ff02ffff : pcmcia
+ * ff010000 -> ff01ffff : BCSR       connected to CS1, setup by 8xxROM
+ * ff000000 -> ff00ffff : IMAP       internal in the cpu
+ * 02800000 -> 0287ffff : flash      connected to CS0
+ * 00000000 -> nnnnnnnn : sdram      setup by U-Boot
+ *
+ * CS pins are connected as follows:
+ *
+ * CS0 -512Kb boot flash
+ * CS1 - SDRAM #1
+ * CS2 - SDRAM #2
+ * CS3 - Flash #1
+ * CS4 - Flash #2
+ * CS5 - LON (if present)
+ * CS6 - PCMCIA #1
+ * CS7 - PCMCIA #2
+ *
+ * Ports are configured as follows:
+ *
+ * PA7 - SDRAM banks enable
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#define CFG_PA7		0x0100
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMB RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBEEC00,
+	0x1FFDDC47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMB RAM)
+	 *
+         * This is no UPM entry point. The following definition uses
+         * the remaining space to establish an initialization
+         * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FFDDC34, 0xEFEEAC34, 0x1FBD5C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMB RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBEEC00, 0x1FFDDC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMB RAM)
+	 */
+	0x1F2DFC04, 0xEEAFAC00, 0x01BE4C04, 0x1FFDDC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMB RAM)
+	 */
+	0x1F0DFC04, 0xEEAFAC00, 0x10AF5C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BEEC04, 0x1FFDDC47, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMB RAM)
+	 */
+	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMB RAM)
+	 */
+	0x7FFFFC07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity
+ */
+
+int checkboard (void)
+{
+    puts ("Board: GenieTV\n");
+    return 0;
+}
+
+#if 0
+static void PrintState(void)
+{
+    volatile immap_t     *im  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &im->im_memctl;
+
+    printf("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0, memctl->memc_or0);
+    printf("\n1 - SDRAM: B=%08x O=%08x", memctl->memc_br1, memctl->memc_or1);
+    printf("\n2 - SDRAM: B=%08x O=%08x", memctl->memc_br2, memctl->memc_or2);
+}
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+    volatile immap_t     *im  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &im->im_memctl;
+    long int size_b0, size_b1, size8;
+
+    /* Enable SDRAM */
+
+    /* Configuring PA7 for general purpouse output pin */
+    im->im_ioport.iop_papar &= ~CFG_PA7 ;	/* 0 = general purpouse */
+    im->im_ioport.iop_padir |= CFG_PA7 ;	/* 1 = output */
+
+    /* Enable SDRAM - PA7 = 1 */
+    im->im_ioport.iop_padat |= CFG_PA7 ;	/* value of PA7 */
+
+    /*
+     * Preliminary prescaler for refresh (depends on number of
+     * banks): This value is selected for four cycles every 62.4 us
+     * with two SDRAM banks or four cycles every 31.2 us with one
+     * bank. It will be adjusted after memory sizing.
+     */
+    memctl->memc_mptpr = CFG_MPTPR_2BK_4K ;
+
+    memctl->memc_mbmr = CFG_MBMR_8COL;
+
+    upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+    /*
+     * Map controller banks 1 and 2 to the SDRAM banks 1 and 2 at
+     * preliminary addresses - these have to be modified after the
+     * SDRAM size has been determined.
+     */
+
+    memctl->memc_or1 = 0xF0000000 | CFG_OR_TIMING_SDRAM;
+    memctl->memc_br1 = ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
+
+    memctl->memc_or2 = 0xF0000000 | CFG_OR_TIMING_SDRAM;
+    memctl->memc_br2 = ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V);
+
+    /* perform SDRAM initialization sequence */
+    memctl->memc_mar  = 0x00000088;
+
+    memctl->memc_mcr  = 0x80802105;	/* SDRAM bank 0 */
+
+    memctl->memc_mcr  = 0x80804105;	/* SDRAM bank 1 */
+
+    /* Execute refresh 8 times */
+    memctl->memc_mbmr = (CFG_MBMR_8COL & ~MAMR_TLFB_MSK) | MAMR_TLFB_8X ;
+
+    memctl->memc_mcr  = 0x80802130;	/* SDRAM bank 0 - execute twice */
+
+    memctl->memc_mcr  = 0x80804130;	/* SDRAM bank 1 - execute twice */
+
+    /* Execute refresh 4 times */
+    memctl->memc_mbmr = CFG_MBMR_8COL;
+
+    /*
+     * Check Bank 0 Memory Size for re-configuration
+     *
+     * try 8 column mode
+     */
+
+#if 0
+    PrintState();
+#endif
+/*    printf ("\nChecking bank1..."); */
+    size8 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+
+    size_b0 = size8 ;
+
+/*    printf ("\nChecking bank2..."); */
+    size_b1 = dram_size (memctl->memc_mbmr, (ulong *)SDRAM_BASE2_PRELIM,SDRAM_MAX_SIZE);
+
+    /*
+     * Final mapping: map bigger bank first
+     */
+
+    memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+    memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
+
+    if (size_b1 > 0)
+    {
+        /*
+         * Position Bank 1 immediately above Bank 0
+         */
+        memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+        memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) +
+	                   (size_b0 & BR_BA_MSK);
+    }
+	else
+    {
+        /*
+         * No bank 1
+         *
+         * invalidate bank
+         */
+        memctl->memc_br2 = 0;
+	/* adjust refresh rate depending on SDRAM type, one bank */
+	memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+    }
+
+    /* If no memory detected, disable SDRAM */
+    if ((size_b0 + size_b1) == 0)
+    {
+	printf("disabling SDRAM!\n");
+	/* Disable SDRAM - PA7 = 1 */
+	im->im_ioport.iop_padat &= ~CFG_PA7 ;	/* value of PA7 */
+    }
+/*	else */
+/*    printf("done! (%08lx)\n", size_b0 + size_b1); */
+
+#if 0
+    PrintState();
+#endif
+    return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mbmr_value, long int *base, long int maxsize)
+{
+    volatile long int	 *addr;
+    long int		  cnt, val;
+
+    /*memctl->memc_mbmr = mbmr_value; */
+
+    for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	*addr = ~cnt;
+    }
+
+    /* write 0 to base address */
+    addr = base;
+    *addr = 0;
+
+    /* check at base address */
+    if ((val = *addr) != 0) {
+	printf("(0)");
+	return (0);
+    }
+
+    for (cnt = 1; ; cnt <<= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	val = *addr;
+	if (val != (~cnt)) {
+/*	    printf("(%08lx)", cnt*sizeof(long)); */
+	    return (cnt * sizeof(long));
+	}
+    }
+    /* NOTREACHED */
+	return (0);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef	CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+	volatile pcmconf8xx_t	*pcmp;
+	uint v, slota, slotb;
+
+	/*
+	** Enable the PCMCIA for a Flash card.
+	*/
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+#if 0
+	pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR;
+	pcmp->pcmc_por0 = 0xc00ff05d;
+#endif
+
+	/* Set all slots to zero by default. */
+	pcmp->pcmc_pgcra = 0;
+	pcmp->pcmc_pgcrb = 0;
+#ifdef PCMCIA_SLOT_A
+	pcmp->pcmc_pgcra = 0x40;
+#endif
+#ifdef PCMCIA_SLOT_B
+	pcmp->pcmc_pgcrb = 0x40;
+#endif
+
+	/* Check if any PCMCIA card is luged in. */
+	slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
+	slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
+
+	if (!(slota || slotb))
+	{
+		printf("No card present\n");
+#ifdef PCMCIA_SLOT_A
+		pcmp->pcmc_pgcra = 0;
+#endif
+#ifdef PCMCIA_SLOT_B
+		pcmp->pcmc_pgcrb = 0;
+#endif
+		return -1;
+	}
+	    else
+	printf("Unknown card (");
+
+	v = 0;
+
+	switch( (pcmp->pcmc_pipr >> 14) & 3 )
+	{
+		case 0x00 :
+			printf("5V");
+			v = 5;
+			break;
+		case 0x01 :
+			printf("5V and 3V");
+			v = 3;
+			break;
+		case 0x03 :
+			printf("5V, 3V and x.xV");
+			v = 3;
+			break;
+	}
+
+	switch(v){
+	case 3:
+	    printf("; using 3V");
+	    /* Enable 3 volt Vcc. */
+
+	    break;
+
+	default:
+		printf("; unknown voltage");
+		return -1;
+	}
+	printf(")\n");
+	/* disable pcmcia reset after a while */
+
+	udelay(20);
+
+	pcmp->pcmc_pgcrb = 0;
+
+	/* If you using a real hd you should give a short
+	* spin-up time. */
+#ifdef CONFIG_DISK_SPINUP_TIME
+	udelay(CONFIG_DISK_SPINUP_TIME);
+#endif
+
+	return 0;
+}
+#endif	/* CFG_CMD_PCMCIA */
diff --git a/board/lart/config.mk b/board/lart/config.mk
new file mode 100644
index 00000000000..8f1a62bbaa1
--- /dev/null
+++ b/board/lart/config.mk
@@ -0,0 +1,23 @@
+#
+# LART board with SA1100 cpu
+#
+# see http://www.lart.tudelft.nl/ for more information on LART
+#
+
+#
+# LART has 4 banks of 8 MB DRAM
+#
+# c000'0000
+# c100'0000
+# c800'0000
+# c900'0000
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to c170'0000, the upper 1 MB of second bank
+#
+# download areas is c800'0000
+#
+
+
+TEXT_BASE = 0xc1700000
diff --git a/board/lart/memsetup.S b/board/lart/memsetup.S
new file mode 100644
index 00000000000..bebd697a83b
--- /dev/null
+++ b/board/lart/memsetup.S
@@ -0,0 +1,96 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+MEM_BASE:	.long	0xa0000000
+MEM_START:	.long	0xc0000000
+
+#define	MDCNFG	0x00
+#define MDCAS0	0x04
+#define MDCAS1	0x08
+#define MDCAS2	0x0c
+#define MSC0	0x10
+#define MSC1	0x14
+#define MECR	0x18
+
+mdcas0:		.long	0xc71c703f
+mdcas1:		.long	0xffc71c71
+mdcas2:		.long	0xffffffff
+/* mdcnfg:		.long   0x0bb2bcbf */
+mdcnfg:		.long	0x0334b22f	@ alt
+/* mcs0:		.long   0xfff8fff8 */
+msc0:		.long	0xad8c4888	@ alt
+mecr:		.long	0x00060006
+/* mecr:		.long	0x994a994a	@ alt */
+
+/* setting up the memory */
+
+.globl memsetup
+memsetup:
+	ldr	r0, MEM_BASE
+
+	/* Setup the flash memory */
+	ldr	r1, msc0
+	str	r1, [r0, #MSC0]
+
+	/* Set up the DRAM */
+
+	/* MDCAS0 */
+	ldr	r1, mdcas0
+	str	r1, [r0, #MDCAS0]
+
+	/* MDCAS1 */
+	ldr	r1, mdcas1
+	str	r1, [r0, #MDCAS1]
+
+	/* MDCAS2 */
+	ldr	r1, mdcas2
+	str	r1, [r0, #MDCAS2]
+
+	/* MDCNFG */
+	ldr	r1, mdcnfg
+	str	r1, [r0, #MDCNFG]
+
+	/* Set up PCMCIA space */
+	ldr	r1, mecr
+	str	r1, [r0, #MECR]
+
+	/* Load something to activate bank */
+	ldr	r1, MEM_START
+
+.rept	8
+	ldr	r0, [r1]
+.endr
+
+	/* everything is fine now */
+	mov	pc, lr
+
diff --git a/board/lubbock/memsetup.S b/board/lubbock/memsetup.S
new file mode 100644
index 00000000000..c0278340a82
--- /dev/null
+++ b/board/lubbock/memsetup.S
@@ -0,0 +1,749 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE:  .long   CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+   .macro CPWAIT reg
+   mrc  p15,0,\reg,c2,c0,0
+   mov  \reg,\reg
+   sub  pc,pc,#4
+   .endm
+
+
+.globl memsetup
+memsetup:
+
+    mov      r10, lr
+
+    /* Set up GPIO pins first */
+
+	ldr		r0,	=GPSR0
+	ldr		r1,	=CFG_GPSR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR1
+	ldr		r1,	=CFG_GPSR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPSR2
+	ldr		r1,	=CFG_GPSR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR0
+	ldr		r1,	=CFG_GPCR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR1
+	ldr		r1,	=CFG_GPCR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPCR2
+	ldr		r1,	=CFG_GPCR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR0
+	ldr		r1,	=CFG_GPDR0_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR1
+	ldr		r1,	=CFG_GPDR1_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GPDR2
+	ldr		r1,	=CFG_GPDR2_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_L
+	ldr		r1,	=CFG_GAFR0_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR0_U
+	ldr		r1,	=CFG_GAFR0_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_L
+	ldr		r1,	=CFG_GAFR1_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR1_U
+	ldr		r1,	=CFG_GAFR1_U_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_L
+	ldr		r1,	=CFG_GAFR2_L_VAL
+	str		r1,   [r0]
+
+	ldr		r0,	=GAFR2_U
+	ldr		r1,	=CFG_GAFR2_U_VAL
+	str		r1,   [r0]
+
+   /* enable GPIO pins */
+	ldr		r0,	=PSSR
+	ldr		r1,	=CFG_PSSR_VAL
+	str		r1,   [r0]
+
+   ldr    r3, =MSC1		    		/* low - bank 2 Lubbock Registers / SRAM */
+   ldr    r2, =CFG_MSC1_VAL			/* high - bank 3 Ethernet Controller */
+   str    r2, [r3]  				/* need to set MSC1 before trying to write to the HEX LEDs */
+   ldr    r2, [r3]  				/* need to read it back to make sure the value latches (see MSC section of manual) */
+
+   ldr    r1, =LED_BLANK
+   mov    r0, #0xFF
+   str    r0, [r1]    		/* turn on hex leds */
+
+loop:
+   ldr		r0, =0xB0070001
+   ldr    	r1, =_LED
+   str    	r0, [r1]    							/* hex display */
+
+/*********************************************************************
+    Initlialize Memory Controller
+	 The sequence below is based on the recommended init steps detailed
+	 in the EAS, chapter 5 (Chapter 10, Operating Systems Developers Guide)
+
+
+    pause for 200 uSecs- allow internal clocks to settle
+	 *Note: only need this if hard reset... doing it anyway for now
+*/
+
+	@ ---- Wait 200 usec
+	ldr r3, =OSCR       @ reset the OS Timer Count to zero
+	mov r2, #0
+	str r2, [r3]
+	ldr r4, =0x300			@ really 0x2E1 is about 200usec, so 0x300 should be plenty
+1:
+	ldr r2, [r3]
+	cmp r4, r2
+	bgt 1b
+
+mem_init:
+        @ get memory controller base address
+        ldr     r1,  =MEMC_BASE
+
+@****************************************************************************
+@  Step 1
+@
+
+        @ write msc0, read back to ensure data latches
+        @
+        ldr     r2,   =CFG_MSC0_VAL
+        str     r2,   [r1, #MSC0_OFFSET]
+        ldr     r2,   [r1, #MSC0_OFFSET]
+
+        @ write msc1
+        ldr     r2,  =CFG_MSC1_VAL
+        str     r2,  [r1, #MSC1_OFFSET]
+        ldr     r2,  [r1, #MSC1_OFFSET]
+
+        @ write msc2
+        ldr     r2,  =CFG_MSC2_VAL
+        str     r2,  [r1, #MSC2_OFFSET]
+        ldr     r2,  [r1, #MSC2_OFFSET]
+
+        @ write mecr
+        ldr     r2,  =CFG_MECR_VAL
+        str     r2,  [r1, #MECR_OFFSET]
+
+        @ write mcmem0
+        ldr     r2,  =CFG_MCMEM0_VAL
+        str     r2,  [r1, #MCMEM0_OFFSET]
+
+        @ write mcmem1
+        ldr     r2,  =CFG_MCMEM1_VAL
+        str     r2,  [r1, #MCMEM1_OFFSET]
+
+        @ write mcatt0
+        ldr     r2,  =CFG_MCATT0_VAL
+        str     r2,  [r1, #MCATT0_OFFSET]
+
+        @ write mcatt1
+        ldr     r2,  =CFG_MCATT1_VAL
+        str     r2,  [r1, #MCATT1_OFFSET]
+
+        @ write mcio0
+        ldr     r2,  =CFG_MCIO0_VAL
+        str     r2,  [r1, #MCIO0_OFFSET]
+
+        @ write mcio1
+        ldr     r2,  =CFG_MCIO1_VAL
+        str     r2,  [r1, #MCIO1_OFFSET]
+
+        @-------------------------------------------------------
+        @ 3rd bullet, Step 1
+        @
+
+        @ get the mdrefr settings
+        ldr     r3,  =CFG_MDREFR_VAL_100
+
+        @ extract DRI field (we need a valid DRI field)
+        @
+        ldr     r2,  =0xFFF
+
+        @ valid DRI field in r3
+        @
+        and     r3,  r3,  r2
+
+        @ get the reset state of MDREFR
+        @
+        ldr     r4,  [r1, #MDREFR_OFFSET]
+
+        @ clear the DRI field
+        @
+        bic     r4,  r4,  r2
+
+        @ insert the valid DRI field loaded above
+        @
+        orr     r4,  r4,  r3
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+
+        @ *Note: preserve the mdrefr value in r4 *
+
+@****************************************************************************
+@  Step 2
+@
+        /* This should be for SRAM, why is it commented out??? */
+
+        @ fetch sxcnfg value
+        @
+        @ldr     r2,  =0
+        @ write back sxcnfg
+        @str     r2,  [r1, #SXCNFG_OFFSET]
+
+/*        @if sxcnfg=0, don't program for synch-static memory */
+        @cmp     r2,  #0
+        @beq     1f
+
+        @program sxmrs
+        @ldr     r2,  =SXMRS_SETTINGS
+        @str     r2,  [r1, #SXMRS_OFFSET]
+
+
+@****************************************************************************
+@  Step 3
+@
+
+        @ Assumes previous mdrefr value in r4, if not then read current mdrefr
+
+        @ clear the free-running clock bits
+        @ (clear K0Free, K1Free, K2Free
+        @
+        bic     r4,  r4,  #(0x00800000 | 0x01000000 | 0x02000000)
+
+        @ set K1RUN if bank 0 installed
+        @
+        orr   r4,  r4,  #0x00010000
+
+
+
+#ifdef THIS
+@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+@<!<!<!<!<!<!<!<!<!<!<!  Begin INSERT 1    <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+        @ Lubbock: Allow the user to select the {T/R/M} with predetermined
+        @   SDCLK.  Based on Table 3-1 in PXA250 and PXA210 Dev Man.
+        @
+        @  * = Must set MDREFR.K1DB2 to halve the MemClk for desired SDCLK[1]
+        @
+        @   S25, S26 used to provide all 400 MHz BIN values for Cotulla (0,0 - 1,3)
+        @   S25, S26 used to provide all 200 MHz BIN values for Sabinal
+        @
+        @   S23: Force the halving of MemClk when deriving SDCLK[1]
+        @        DOT: no override  !DOT: halve (if not already forced half)
+/*        @        *For certain MemClks, SDCLK's derivation is forced to be halved */
+        @
+        @   S24: Run/Turbo.
+        @        DOT: Run mode   !DOT: Turbo mode
+        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+        @
+        @ Allow the user to control K1DB2 where applicable
+        @
+        @ Get the value of S23:          @ 1 = DOT (unity), 0 = !DOT (halve it)
+        @
+        @ DOT:   set K1DB2     (SDCLD = MemClk)
+        @ !DOT:  clear K1DB2   (SDCLK = MemClk/2)
+        @
+        @ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+        bl GET_S23                          @ r3, r2                    @ get the value of S23 in R0, i put the base adx of fpga in r3
+
+        cmp      r3, #0x0                 @ is !DOT?
+        orreq    r4, r4,  #0x00020000     @ SDClk[1] = MemClk/2
+        bicne    r4, r4,  #0x00020000     @ SDClk[1] = MemClk
+
+        @
+        @ Next, we need to look for S25,S26 selections that necessitate the
+        @  halving of MemClk to derive SDCLK[1]: (S25,S26)={03-0C, 10-13}
+        @ Override above S23-based selection accordingly.
+        @
+        ldr r2, =FPGA_REGS_BASE_PHYSICAL
+        bl  GET_S25                           @ r0, r2
+                                       @ get the value of S25 in R0, i put the base adx of fpga in r2
+
+
+
+        ldr r2, =FPGA_REGS_BASE_PHYSICAL
+        BL  GET_S26                              @ r3, r2
+                                      @ get the value of S26 in R1, i put the base adx of fpga in r2
+
+        orr     r0, r0, r3               @ concatenate S25 & S26 vals
+        and     r0, r0, #0xFF
+
+        @ Set K1DB2 for the frequencies that require it
+        @
+        cmp     r0, #0x03
+        cmpne   r0, #0x04
+        cmpne   r0, #0x05
+        cmpne   r0, #0x06
+        cmpne   r0, #0x07
+        cmpne   r0, #0x08
+        cmpne   r0, #0x09
+        cmpne   r0, #0x0A
+        cmpne   r0, #0x0B
+        cmpne   r0, #0x0C
+        cmpne   r0, #0x10
+        cmpne   r0, #0x11
+        cmpne   r0, #0x12
+        cmpne   r0, #0x13
+        orreq   r4, r4,  #0x00020000     @ SDCLK[1] = (MemClk)/2 for 03 - 0C @ 10 - 13
+
+        @
+        @ *Must make MSC0&1 adjustments now for MEMClks > 100MHz.
+        @
+        @ Adjust MSC0 for MemClks > 100 MHz
+        @
+        ldreq   r0,   [r1, #MSC0_OFFSET]
+        ldreq   r3,   =0x7F007F00
+        biceq   r0,   r0, r3                @ clear MSC0[14:12, 11:8] (RRR, RDN)
+        ldreq   r3,   =0x46004600
+        orreq   r0,   r0, r3                @ set   MSC0[14, 10:9]  (doubling RRR, RDN)
+        streq   r0,   [r1, #MSC0_OFFSET]
+        ldreq   r0,   [r1, #MSC0_OFFSET]    @ read it back to ensure that the data latches
+
+        @
+        @ Adjust MSC1.LH for MemClks > 100 MHz
+        @
+        ldreq   r0,   [r1, #MSC1_OFFSET]
+        ldreq   r3,   =0x7FF0
+        biceq   r0,   r0, r3               @ clear MSC1[14:12, 11:8, 7:4] (RRR, RDN, RDF)
+        ldreq   r3,   =0x4880
+        orreq   r0,   r0, r3               @ set   MSC1[14, 11, 7]  (doubling RRR, RDN, RDF)
+        streq   r0,   [r1, #MSC1_OFFSET]
+        ldreq   r0,   [r1, #MSC1_OFFSET]   @ read it back to ensure that the data latches
+
+        @                                                                   @
+        @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+#endif
+
+@<!<!<!<!<!<!<!<!<!<!<!    End INSERT 1    <!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+@<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<!<
+
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+        ldr     r4,  [r1, #MDREFR_OFFSET]
+
+        @ deassert SLFRSH
+        @
+        bic     r4,  r4,  #0x00400000
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+
+        @ assert E1PIN
+        @
+        orr     r4,  r4,  #0x00008000
+
+        @ write back mdrefr
+        @
+        str     r4,  [r1, #MDREFR_OFFSET]
+        ldr     r4,  [r1, #MDREFR_OFFSET]
+        nop
+        nop
+
+
+@****************************************************************************
+@  Step 4
+@
+
+        @ fetch platform value of mdcnfg
+        @
+        ldr     r2,  =CFG_MDCNFG_VAL
+
+        @ disable all sdram banks
+        @
+        bic     r2,  r2,  #(MDCNFG_DE0 | MDCNFG_DE1)
+        bic     r2,  r2,  #(MDCNFG_DE2 | MDCNFG_DE3)
+
+        @ program banks 0/1 for bus width
+        @
+        bic   r2,  r2,  #MDCNFG_DWID0      @0=32-bit
+
+
+        @ write initial value of mdcnfg, w/o enabling sdram banks
+        @
+        str     r2,  [r1, #MDCNFG_OFFSET]
+
+@ ****************************************************************************
+@  Step 5
+@
+
+        @ pause for 200 uSecs
+        @
+    	ldr r3, =OSCR   @reset the OS Timer Count to zero
+    	mov r2, #0
+	    str r2, [r3]
+	    ldr r4, =0x300			@really 0x2E1 is about 200usec, so 0x300 should be plenty
+1:
+	    ldr r2, [r3]
+	    cmp r4, r2
+	    bgt 1b
+
+
+@****************************************************************************
+@  Step 6
+@
+
+	    mov    r0, #0x78				    @turn everything off
+      mcr    p15, 0, r0, c1, c0, 0		@(caches off, MMU off, etc.)
+
+
+@ ****************************************************************************
+@  Step 7
+@
+        @ Access memory *not yet enabled* for CBR refresh cycles (8)
+        @ - CBR is generated for all banks
+
+	    ldr     r2, =CFG_DRAM_BASE
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+
+
+@ ****************************************************************************
+@  Step 8: NOP (enable dcache if you wanna... we dont)
+@
+
+
+@ ****************************************************************************
+@  Step 9
+@
+
+
+        @get memory controller base address
+        @
+        ldr     r1,  =MEMC_BASE
+
+        @fetch current mdcnfg value
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+        @enable sdram bank 0 if installed (must do for any populated bank)
+        @
+        orr     r3,  r3,  #MDCNFG_DE0
+
+        @write back mdcnfg, enabling the sdram bank(s)
+        @
+        str     r3,  [r1, #MDCNFG_OFFSET]
+
+
+@****************************************************************************
+@  Step 10
+@
+
+        @ write mdmrs
+        @
+        ldr     r2,  =CFG_MDMRS_VAL
+        str     r2,  [r1, #MDMRS_OFFSET]
+
+
+@****************************************************************************
+@  Step 11: Final Step
+@
+
+@INITINTC
+        @********************************************************************
+        @ Disable (mask) all interrupts at the interrupt controller
+        @
+
+        @ clear the interrupt level register (use IRQ, not FIQ)
+        @
+        mov     r1, #0
+        ldr     r2,  =ICLR
+        str     r1,  [r2]
+
+        @ mask all interrupts at the controller
+        @
+        ldr     r2,  =ICMR
+        str     r1,  [r2]
+
+
+@INITCLKS
+        @ ********************************************************************
+        @ Disable the peripheral clocks, and set the core clock
+        @ frequency (hard-coding at 398.12MHz for now).
+        @
+
+		@ Turn Off ALL on-chip peripheral clocks for re-configuration
+		@ *Note: See label 'ENABLECLKS' for the re-enabling
+		@
+        ldr     r1,  =CKEN
+        mov     r2,  #0
+        str     r2,  [r1]
+
+
+        @ default value in case no valid rotary switch setting is found
+        ldr     r2, =(CCCR_L27 | CCCR_M2 | CCCR_N10)        @ DEFAULT: {200/200/100}
+
+
+        @... and write the core clock config register
+        @
+        ldr     r1,  =CCCR
+        str     r2,  [r1]
+
+/*        @ enable the 32Khz oscillator for RTC and PowerManager
+        @
+        ldr     r1,  =OSCC
+        mov     r2,  #OSCC_OON
+        str     r2,  [r1]
+
+
+        @ NOTE:  spin here until OSCC.OOK get set,
+        @        meaning the PLL has settled.
+        @
+60:
+        ldr     r2, [r1]
+        ands    r2, r2, #1
+        beq     60b
+*/
+
+@OSCC_OON_DONE
+
+
+#ifdef  A0_COTULLA
+    @****************************************************************************
+    @ !!! Take care of A0 Errata Sighting #4 --
+    @ after a frequency change, the memory controller must be restarted
+    @
+
+        @ get memory controller base address
+        ldr     r1,  =MEMC_BASE
+
+        @ get the current state of MDREFR
+        @
+        ldr     r2,  [r1, #MDREFR_OFFSET]
+
+        @ clear E0PIN, E1PIN
+        @
+        bic     r3,  r2,  #(MDREFR_E0PIN | MDREFR_E1PIN)
+
+        @ write MDREFR with E0PIN, E1PIN cleared (disable sdclk[0,1])
+        @
+        str     r3,  [r1, #MDREFR_OFFSET]
+
+        @ then write MDREFR with E0PIN, E1PIN set (enable sdclk[0,1])
+        @
+        str     r2,  [r1, #MDREFR_OFFSET]
+
+        @ get the current state of MDCNFG
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+        @ disable all SDRAM banks
+        @
+        bic     r3,  r3,  #(MDCNFG_DE0 | MDCNFG_DE1)
+        bic     r3,  r3,  #(MDCNFG_DE2 |  MDCNFG_DE3)
+
+        @ write back MDCNFG
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+	    @ Access memory not yet enabled for CBR refresh cycles (8)
+        @ - CBR is generated for *all* banks
+	    ldr     r2, =CFG_DRAM_BASE
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+	    str     r2, [r2]
+
+        @ fetch current mdcnfg value
+        @
+        ldr     r3,  [r1, #MDCNFG_OFFSET]
+
+        @ enable sdram bank 0 if installed
+        @
+        orr     r3,  r3,  #MDCNFG_DE0
+
+        @ write back mdcnfg, enabling the sdram bank(s)
+        @
+        str     r3,  [r1, #MDCNFG_OFFSET]
+
+        @ write mdmrs
+        @
+        ldr     r2,  =CFG_MDMRS_VAL
+        str     r2,  [r1, #MDMRS_OFFSET]
+
+
+
+    /*    @ errata: don't enable auto power-down */
+        @ get current value of mdrefr
+        @ldr     r3,  [r1, #MDREFR_OFFSET]
+        @ enable auto-power down
+        @orr     r3,  r3,  #MDREFR_APD
+        @write back mdrefr
+        @str     r3,  [r1, #MDREFR_OFFSET]
+
+#endif A0_Cotulla
+
+
+  ldr     r0, =0x000C0dE3
+  ldr    	r1, =_LED
+  str    	r0, [r1]    		/* hex display */
+
+@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+@ ^%^%^%^%^%^%^%^%^%   above could be replaced by prememLLI ^%^%^%^%^%^%^%^%^%
+@ ^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%^%
+
+
+	/* Save SDRAM size */
+    ldr     r1, =DRAM_SIZE
+	 str	   r8, [r1]
+
+    ldr     r0, =0xC0DE0006
+    ldr    	r1, =_LED
+    str    	r0, [r1]    		/* hex display */
+
+	/* Interrupt init */
+	/* Mask all interrupts */
+    ldr	r0, =ICMR /* enable no sources */
+	mov r1, #0
+    str r1, [r0]
+
+#define NODEBUG
+#ifdef NODEBUG
+	/*Disable software and data breakpoints */
+	mov	r0,#0
+	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
+	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
+	mcr	p15,0,r0,c14,c4,0  /* dbcon */
+
+	/*Enable all debug functionality */
+	mov	r0,#0x80000000
+	mcr	p14,0,r0,c10,c0,0  /* dcsr */
+
+#endif
+
+	ldr     r0, =0xBEEF001D
+    ldr    	r1, =_LED
+    str    	r0, [r1]    		/* hex display */
+
+	mov	pc, r10
+
+@ End memsetup
+
+@ %%%%%%%%%%%   Useful subroutines
+GET_S23:
+    @ This macro will read S23 and return its value in r3
+    @ r2 contains the base address of the Lubbock user registers
+    ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+    /*@ read S23's value */
+    ldr     r3, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r3, r3, #0x200
+
+    @ get bit into position 0
+    mov     r3, r3, LSR #9
+
+    mov     pc, lr
+@ End GET_S23
+
+
+GET_S24:
+    @ This macro will read S24 and return its value in r0
+    @ r2 contains the base address of the Lubbock user registers
+    ldr r2, =FPGA_REGS_BASE_PHYSICAL
+
+    /*@ read S24's value */
+    ldr     r0, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r0, r0, #0x100
+
+    @ get bit into position 0
+    mov     r0, r0, LSR #8
+
+    mov     pc, lr
+@ End GET_S23
+
+
+GET_S25:
+    @ This macro will read rotary S25 and return its value in r0
+    @ r2 contains the base address of the Lubbock user registers
+    @ read the user switches register
+    ldr     r0, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r0, r0, #0xF0
+
+    mov     pc, lr
+@ End subroutine
+
+
+GET_S26:
+    @ This macro will read rotary S26 and return its value in r3
+    @ r2 contains the base address of the Lubbock user registers
+    @ read the user switches register
+    ldr     r3, [r2, #USER_SWITCHES_OFFSET]
+
+    @ mask out irrelevant bits
+    and     r3, r3, #0x0F
+
+    mov     pc, lr
+@ End subroutine GET_S26
+
+
diff --git a/board/mbx8xx/config.mk b/board/mbx8xx/config.mk
new file mode 100644
index 00000000000..d5e8ed264c4
--- /dev/null
+++ b/board/mbx8xx/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MBX8xx boards
+#
+
+TEXT_BASE = 0xfe000000
+/*TEXT_BASE  = 0x00200000 */
diff --git a/board/ml2/flash.c b/board/ml2/flash.c
new file mode 100644
index 00000000000..77e0931bcd6
--- /dev/null
+++ b/board/ml2/flash.c
@@ -0,0 +1,301 @@
+/*
+ * flash.c: Support code for the flash chips on the Xilinx ML2 board
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire program
+ * is licensed under the GPL.
+ *
+ */
+
+#include <common.h>
+#include <asm/u-boot.h>
+#include <configs/ML2.h>
+
+#define FLASH_BANK_SIZE (64*1024*1024)
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+#define SECT_SIZE		(512*1024)
+
+#define CMD_READ_ARRAY	0x00FF00FF00FF00FULL
+#define CMD_IDENTIFY        0x0090009000900090ULL
+#define CMD_ERASE_SETUP     0x0020002000200020ULL
+#define CMD_ERASE_CONFIRM   0x00D000D000D000D0ULL
+#define CMD_PROGRAM     0x0040004000400040ULL
+#define CMD_RESUME      0x00D000D000D000D0ULL
+#define CMD_SUSPEND     0x00B000B000B000B0ULL
+#define CMD_STATUS_READ     0x0070007000700070ULL
+#define CMD_STATUS_RESET    0x0050005000500050ULL
+
+#define BIT_BUSY        0x0080008000800080ULL
+#define BIT_ERASE_SUSPEND   0x004000400400040ULL
+#define BIT_ERASE_ERROR     0x0020002000200020ULL
+#define BIT_PROGRAM_ERROR   0x0010001000100010ULL
+#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL
+#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL
+#define BIT_PROTECT_ERROR   0x0002000200020002ULL
+#define BIT_UNDEFINED       0x0001000100010001ULL
+
+#define BIT_SEQUENCE_ERROR  0x0030003000300030ULL
+
+#define BIT_TIMEOUT     0x80000000
+
+
+inline void eieio(void) {
+
+	__asm__ __volatile__ ("eieio" : : : "memory");
+
+}
+
+ulong flash_init(void) {
+
+	int i, j;
+	ulong size = 0;
+
+	for(i=0;i<CFG_MAX_FLASH_BANKS;i++) {
+		ulong flashbase = 0;
+
+		flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) |
+								 (INTEL_ID_28F128J3A & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		if (i==0)
+			flashbase = CFG_FLASH_BASE;
+		else
+			panic("configured to many flash banks!\n");
+		for (j = 0; j < flash_info[i].sector_count; j++)
+				flash_info[i].start[j]=flashbase + j * SECT_SIZE;
+
+		size += flash_info[i].size;
+	}
+
+	return size;
+}
+
+void flash_print_info  (flash_info_t *info) {
+
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case (INTEL_MANUFACT & FLASH_VENDMASK):
+			printf("Intel: ");
+			break;
+		default:
+			printf("Unknown Vendor ");
+			break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+		case (INTEL_ID_28F128J3A & FLASH_TYPEMASK):
+			printf("4x 28F128J3A (128Mbit)\n");
+			break;
+		default:
+			printf("Unknown Chip Type\n");
+			break;
+	}
+
+	printf("  Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf (" %08lX%s", info->start[i],
+				 info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+}
+
+int flash_error (unsigned long long code) {
+
+	if (code & BIT_TIMEOUT) {
+		printf ("Timeout\n");
+		return ERR_TIMOUT;
+	}
+
+	if (~code & BIT_BUSY) {
+		printf ("Busy\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_VPP_RANGE_ERROR) {
+		printf ("Vpp range error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_PROTECT_ERROR) {
+		printf ("Device protect error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_SEQUENCE_ERROR) {
+		printf ("Command seqence error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_ERASE_ERROR) {
+		printf ("Block erase error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_PROGRAM_ERROR) {
+		printf ("Program error\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_ERASE_SUSPEND) {
+		printf ("Block erase suspended\n");
+		return ERR_PROG_ERROR;
+	}
+
+	if (code & BIT_PROGRAM_SUSPEND) {
+		printf ("Program suspended\n");
+		return ERR_PROG_ERROR;
+	}
+
+	return ERR_OK;
+
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last) {
+
+	int rc = ERR_OK;
+	int sect;
+	unsigned long long result;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last))
+		return ERR_INVAL;
+
+	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
+		return ERR_UNKNOWN_FLASH_VENDOR;
+
+	for (sect=s_first; sect<=s_last; ++sect)
+		if (info->protect[sect])
+			return ERR_PROTECTED;
+
+	for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+		volatile unsigned long long *addr=
+									(unsigned long long *)(info->start[sect]);
+
+		printf("Erasing sector %2d ... ", sect);
+
+		*addr=CMD_STATUS_RESET;
+		eieio();
+		*addr=CMD_ERASE_SETUP;
+		eieio();
+		*addr=CMD_ERASE_CONFIRM;
+		eieio();
+
+		do {
+			result = *addr;
+		} while(~result & BIT_BUSY);
+
+		*addr=CMD_READ_ARRAY;
+
+		if ((rc = flash_error(result)) == ERR_OK)
+			printf("ok.\n");
+		else
+			break;
+	}
+
+	if (ctrlc())
+		printf("User Interrupt!\n");
+
+	return rc;
+}
+
+volatile static int write_word (flash_info_t *info, ulong dest, unsigned long long data) {
+
+	volatile unsigned long long *addr=(unsigned long long *)dest;
+	unsigned long long result;
+	int rc = ERR_OK;
+
+	result=*addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+	*addr=CMD_STATUS_RESET;
+	eieio();
+	*addr=CMD_PROGRAM;
+	eieio();
+	*addr=data;
+	eieio();
+
+	do {
+		result=*addr;
+	} while(~result & BIT_BUSY);
+
+	*addr=CMD_READ_ARRAY;
+
+	rc = flash_error(result);
+
+	return rc;
+
+}
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
+
+	ulong cp, wp;
+	unsigned long long data;
+	int l;
+	int i,rc;
+
+	wp=(addr & ~7);
+
+	if((l=addr-wp) != 0) {
+		data=0;
+		for(i=0,cp=wp;i<l;++i,++cp)
+			data = (data >> 8) | (*(uchar *)cp << 24);
+
+		for (; i<8 && cnt>0; ++i) {
+			data = (data >> 8) | (*src++ << 24);
+			--cnt;
+			++cp;
+		}
+
+		for (; i<8; ++i, ++cp)
+			data = (data >> 8) | (*(uchar *)cp << 24);
+
+		if ((rc = write_word(info, wp, data)) != 0)
+			return rc;
+
+		wp+=8;
+	}
+
+	while(cnt>=8) {
+		data=*((unsigned long long *)src);
+		if ((rc = write_word(info, wp, data)) != 0)
+			return rc;
+		src+=8;
+		wp+=8;
+		cnt-=8;
+	}
+
+	if(cnt == 0)
+		return ERR_OK;
+
+	data = 0;
+	for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 24);
+		--cnt;
+	}
+	for (; i<8; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *)cp << 24);
+	}
+
+	return write_word(info, wp, data);
+
+}
+
diff --git a/board/ml2/init.S b/board/ml2/init.S
new file mode 100644
index 00000000000..2386c2ac806
--- /dev/null
+++ b/board/ml2/init.S
@@ -0,0 +1,34 @@
+/*
+ * init.S: Stubs for U-Boot initialization
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+     	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+        blr
+
+        .globl  sdram_init
+sdram_init:
+        blr
diff --git a/board/ml2/ml2.c b/board/ml2/ml2.c
new file mode 100644
index 00000000000..a89a8f9b417
--- /dev/null
+++ b/board/ml2/ml2.c
@@ -0,0 +1,67 @@
+/*
+ * ml2.c: U-Boot platform support for Xilinx ML2 board
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * Derived from : Other platform support files in this tree
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+
+
+
+int board_pre_init (void)
+{
+	return 0;
+}
+
+
+int checkboard (void)
+{
+	unsigned char *s = getenv ("serial#");
+	unsigned char *e;
+
+	if (!s || strncmp (s, "ML2", 9)) {
+		printf ("### No HW ID - assuming ML2");
+	} else {
+		for (e = s; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+
+		for (; s < e; ++s) {
+			putc (*s);
+		}
+	}
+
+
+	putc ('\n');
+
+	return (0);
+}
+
+
+long int initdram (int board_type)
+{
+	return 32 * 1024 * 1024;
+}
+
+int testdram (void)
+{
+	printf ("test: xxx MB - ok\n");
+
+	return (0);
+}
diff --git a/board/mousse/README b/board/mousse/README
new file mode 100644
index 00000000000..ef072bd92ff
--- /dev/null
+++ b/board/mousse/README
@@ -0,0 +1,350 @@
+
+U-Boot for MOUSSE/MPC8240 (KAHLUA)
+----------------------------------
+James Dougherty (jfd@broadcom.com), 09/10/01
+
+The Broadcom/Vooha Mousse board is a 3U Compact PCI system board
+which uses the MPC8240, a 64MB SDRAM SIMM, and has onboard
+DEC 21143, NS16550 UART, an SGS M48T59Y TOD, and 4MB FLASH.
+See also: http://www.vooha.com/
+
+* NVRAM setenv/printenv/savenv supported.
+* Date Command
+* Serial Console support
+* Network support
+* FLASH of kernel images is supported.
+* FLASH of U-Boot to onboard and PLCC boot region.
+* Kernel command line options from NVRAM is supported.
+* IP PNP options supported.
+
+U-Boot Loading...
+
+
+
+U-Boot 1.0.5 (Sep 10 2001 - 00:22:25)
+
+CPU:   MPC8240 Revision 1.1 at 198 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: MOUSSE MPC8240/KAHLUA - CHRP (MAP B)
+Built: Sep 10 2001 at 01:01:50
+MPLD:  Revision 127
+Local Bus:  33 MHz
+RTC:   M48T589 TOD/NVRAM (8176) bytes
+  Current date/time: 9/10/2001 0:18:52
+DRAM:  64 MB
+FLASH:  1.960 MB
+PCI:    scanning bus0 ...
+  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
+  00  00  00 1057  0003  060000 11  00000008 00000000 01   00
+  00  0d  00 1011  0019  020000 41  80000001 80000000 01   01
+  00  0e  00 105a  4d38  018000 01  a0000001 a0001001 01   03
+In:    serial
+Out:   serial
+Err:   serial
+
+Hit any key to stop autoboot:  0
+=>
+
+I. Root FileSystem/IP Configuration
+
+bootcmd=tftp 100000 vmlinux.img;bootm
+bootdelay=3
+baudrate=9600
+ipaddr=<IP ADDRESS>
+netmask=<NETMASK>
+hostname=<NAME>
+serverip=<NFS SERVER IP ADDRESS>
+ethaddr=00:00:10:20:30:44
+nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
+gateway=<IP ADDRESS>
+root=/dev/nfs
+stdin=serial
+stdout=serial
+stderr=serial
+
+NVRAM environment variables.
+
+use the command:
+
+setenv <attribute> <value>
+
+type "saveenv" to write to NVRAM.
+
+
+
+II. To boot from a hard drive:
+
+setenv root /dev/hda1
+
+
+III. IP options which configure the network:
+
+ipaddr=<IP ADDRESS OF MACHINE>
+netmask=<NETMASK>
+hostname=mousse
+ethaddr=00:00:10:20:30:44
+gateway=<IP ADDRESS OF GATEWAY/ROUTER>
+
+
+IV. IP Options which configure NFS Root/Boot Support
+
+root=/dev/nfs
+serverip=<NFS SERVER IP ADDRESS>
+nfsroot=<NFS SERVER IP ADDRESS>:/boot/root-fs
+
+V. U-Boot Image Support
+
+The U-Boot boot loader assumes that after you build
+your kernel (vmlinux), you will create a U-Boot image
+using the following commands or script:
+
+#!/bin/csh
+/bin/touch vmlinux.img
+/bin/rm vmlinux.img
+set path=($TOOLBASE/bin $path)
+set path=($U_BOOT/tools $path)
+powerpc-linux-objcopy -S -O binary vmlinux vmlinux.bin
+gzip -vf vmlinux.bin
+mkimage -A ppc -O linux -T kernel -C gzip -a 0 -e 0 -n vmlinux.bin.gz -d vmlinux.bin.gz vmlinux.img
+ls -l vmlinux.img
+
+
+VI. ONBOARD FLASH Support
+
+FLASH support is provided for the onboard FLASH chip Bootrom area.
+U-Boot is loaded into either the ROM boot region of the FLASH chip,
+after first being boot-strapped from a pre-progammed AMD29F040 PLCC
+bootrom. The PLCC needs to be programmed with a ROM burner using
+AMD 29F040 ROM parts and the u-boot.bin or u-boot.hex (S-Record)
+images.
+
+The PLCC overlays this same region of flash as the onboard FLASH,
+the jumper J100 is a chip-select for which flash chip you want to
+progam. When jumper J100 is connected to pins 2-3, you boot from
+PLCC FLASH.
+
+To bringup a system, simply flash a flash an AMD29F040 PLCC
+bootrom, and put this in the PLCC socket. Move jumper J100 to
+pins 2-3 and boot from the PLCC.
+
+
+Now, while the system is running, move Jumper J100 to
+pins 1-2 and follow the procedure below to FLASH a bootrom
+(u-boot.bin) image into the onboard bootrom region (AMD29LV160DB):
+
+tftp 100000 u-boot.bin
+protect off FFF00000 FFF7FFFF
+erase FFF00000 FFF7FFFF
+cp.b 100000 FFF00000 \$(filesize)\
+
+
+Here is an example:
+
+=>tftp 100000 u-boot.bin
+eth_halt
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 123220 (1e154 hex)
+eth_halt
+=>protect off FFF00000 FFF7FFFF
+Un-Protected 8 sectors
+=>erase FFF00000 FFF7FFFF
+Erase Flash from 0xfff00000 to 0xfff7ffff
+Erase FLASH[PLCC_BOOT] -8 sectors:........ done
+Erased 8 sectors
+=>cp.b 100000 FFF00000 1e154
+Copy to Flash... FLASH[PLCC_BOOT]:..done
+=>
+
+
+B. FLASH RAMDISK REGION
+
+FLASH support is provided for an Onboard 512K RAMDISK region.
+
+TThe following commands will FLASH a bootrom (u-boot.bin) image
+into the onboard FLASH region (AMD29LV160DB 2MB FLASH):
+
+tftp 100000 u-boot.bin
+protect off FFF80000 FFFFFFFF
+erase FFF80000 FFFFFFFF
+cp.b 100000 FFF80000 \$(filesize)\
+
+
+
+C. FLASH KERNEL REGION (960KB)
+
+FLASH support is provided for the 960KB onboard FLASH1 segment.
+This allows flashing of kernel images which U-Boot can load
+and run (standalone) from the onboard FLASH chip. It also assumes
+
+The following commands will FLASH a kernel image to 0xffe10000
+
+tftp 100000 vmlinux.img
+protect off FFE10000 FFEFFFFF
+erase FFE10000 FFEFFFFF
+cp.b 100000 FFE10000 \$(filesize)\
+reset
+
+Here is an example:
+
+
+=>tftp 100000 vmlinux.img
+eth_halt
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+TFTP from server 209.128.93.133; our IP address is 209.128.93.138
+Filename 'vmlinux.img'.
+Load address: 0x100000
+Loading: #####################################################################################################################################################
+done
+Bytes transferred = 760231 (b99a7 hex)
+eth_halt
+=>protect off FFE10000 FFEFFFFF
+Un-Protected 15 sectors
+=>erase FFE10000 FFEFFFFF
+Erase Flash from 0xffe10000 to 0xffefffff
+Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
+Erased 15 sectors
+=>cp.b 100000 FFE10000 b99a7
+Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
+=>
+
+
+
+When finished, use the command:
+
+bootm ffe10000
+
+to start the kernel.
+
+Finally, to make this the default boot command, use
+the following commands:
+
+setenv bootcmd bootm ffe10000
+savenv
+
+to make it automatically boot the kernel from FLASH.
+
+
+To go back to development mode (NFS boot)
+
+setenv bootcmd tftp 100000 vmlinux.img\;bootm
+savenv
+
+
+=>tftp 100000 vmlinux.img
+eth0: DC21143 Ethernet adapter(bus=0, device=13, func=0)
+DEC Ethernet iobase=0x80000000
+ARP broadcast 1
+Filename 'vmlinux.img'.
+Load address: 0x100000
+Loading: ####################################################################################################################################################
+done
+Bytes transferred = 752717 (b7c4d hex)
+eth_halt
+=>protect off FFE10000 FFEFFFFF
+Un-Protected 15 sectors
+=>erase FFE10000 FFEFFFFF
+Erase Flash from 0xffe10000 to 0xffefffff
+Erase FLASH[F0_SA3(KERNEL)] -15 sectors:............... done
+Erased 15 sectors
+=>cp.b 100000 FFE10000 b7c4d
+Copy to Flash... FLASH[F0_SA3(KERNEL)]:............done
+=>bootm ffe10000
+## Booting image at ffe10000 ...
+   Image Name:   vmlinux.bin.gz
+   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
+   Data Size:    752653 Bytes = 735 kB = 0 MB
+   Load Address: 00000000
+   Entry Point:  00000000
+   Verifying Checksum ... OK
+   Uncompressing Kernel Image ... OK
+Total memory = 64MB; using 0kB for hash table (at 00000000)
+Linux version 2.4.2_hhl20 (jfd@atlantis) (gcc version 2.95.2 19991024 (release)) #597 Wed Sep 5 23:23:23 PDT 2001
+cpu0: MPC8240/KAHLUA : MOUSSE Platform : 64MB RAM: MPLD Rev. 7f
+Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)
+IP PNP: 802.3 Ethernet Address=<0:0:10:20:30:44>
+NOTICE: mounting root file system via NFS
+On node 0 totalpages: 16384
+zone(0): 16384 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+time_init: decrementer frequency = 16.665914 MHz
+time_init: MPC8240 PCI Bus frequency = 33.331828 MHz
+Calibrating delay loop... 133.12 BogoMIPS
+Memory: 62436k available (1336k kernel code, 500k data, 88k init, 0k highmem)
+Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
+Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
+Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
+POSIX conformance testing by UNIFIX
+PCI: Probing PCI hardware
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Initializing RT netlink socket
+Starting kswapd v1.8
+pty: 256 Unix98 ptys configured
+block: queued sectors max/low 41394kB/13798kB, 128 slots per queue
+Uniform Multi-Platform E-IDE driver Revision: 6.31
+ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+PDC20262: IDE controller on PCI bus 00 dev 70
+PDC20262: chipset revision 1
+PDC20262: not 100% native mode: will probe irqs later
+PDC20262: ROM enabled at 0x000d0000
+PDC20262: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
+PDC20262: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
+PDC20262: irq=3 dev->irq=3
+    ide0: BM-DMA at 0xbfff00-0xbfff07, BIOS settings: hda:DMA, hdb:DMA
+    ide1: BM-DMA at 0xbfff08-0xbfff0f, BIOS settings: hdc:pio, hdd:pio
+hda: WDC WD300AB-00BVA0, ATA DISK drive
+hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
+ide0 at 0xbfff78-0xbfff7f,0xbfff76 on irq 3
+ide1 at 0xbfff68-0xbfff6f,0xbfff66 on irq 3
+hda: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(66)
+hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache
+Uniform CD-ROM driver Revision: 3.12
+Partition check:
+ /dev/ide/host0/bus0/target0/lun0: p1 p2
+hd: unable to get major 3 for hard disk
+udf: registering filesystem
+loop: loaded (max 8 devices)
+Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
+ttyS00 at 0xffe08080 (irq = 4) is a ST16650
+Linux Tulip driver version 0.9.13a (January 20, 2001)
+eth0: Digital DS21143 Tulip rev 65 at 0xbfff80, EEPROM not present, 00:00:10:20:30:44, IRQ 1.
+eth0:  MII transceiver #0 config 3000 status 7829 advertising 01e1.
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 4096 bind 4096)
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
+devfs: boot_options: 0x0
+VFS: Mounted root (nfs filesystem).
+Mounted devfs on /dev
+Freeing unused kernel memory: 88k init 4k openfirmware
+eth0: Setting full-duplex based on MII#0 link partner capability of 45e1.
+INIT: version 2.78 booting
+INIT: Entering runlevel: 2
+
+
+Welcome to Linux/PPC
+MPC8240/MOUSSE
+
+
+mousse login: root
+Password:
+PAM_unix[13]: (login) session opened for user root by LOGIN(uid=0)
+Last login: Thu Sep  6 00:16:51 2001 on console
+
+
+Welcome to Linux/PPC
+MPC8240/MOUSSE
+
+
+mousse#
diff --git a/board/mousse/mousse.h b/board/mousse/mousse.h
new file mode 100644
index 00000000000..5468314eb72
--- /dev/null
+++ b/board/mousse/mousse.h
@@ -0,0 +1,259 @@
+/*
+ * MOUSSE/MPC8240 Board definitions.
+ * For more info, see http://www.vooha.com/
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James Dougherty (jfd@cs.stanford.edu)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MOUSSE_H
+#define __MOUSSE_H
+
+/* System addresses */
+
+#define PCI_SPECIAL_BASE	0xfe000000
+#define PCI_SPECIAL_SIZE	0x01000000
+
+/* PORTX Device Addresses for Mousse */
+
+#define PORTX_DEV_BASE		0xff000000
+#define PORTX_DEV_SIZE		0x01000000
+
+#define ENET_DEV_BASE		0x80000000
+
+#define PLD_REG_BASE		(PORTX_DEV_BASE | 0xe09000)
+#define PLD_REG(off)		(*(volatile unsigned char *) \
+				 (PLD_REG_BASE + (off)))
+
+#define PLD_REVID_B1		0x7f
+#define PLD_REVID_B2		0x01
+
+/* MPLD */
+#define SYS_HARD_RESET()	{ for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
+#define SYS_REVID_GET()		((int) PLD_REG(0) & 0x7f)
+#define SYS_LED_OFF()		(PLD_REG(1) |= 0x80)
+#define SYS_LED_ON()		(PLD_REG(1) &= ~0x80)
+#define SYS_WATCHDOG_IRQ3()	(PLD_REG(2) |= 0x80)
+#define SYS_WATCHDOG_RESET()	(PLD_REG(2) &= ~0x80)
+#define SYS_TOD_PROTECT()	(PLD_REG(3) |= 0x80)
+#define SYS_TOD_UNPROTECT()	(PLD_REG(3) &= ~0x80)
+
+/* SGS M48T59Y */
+#define TOD_BASE		(PORTX_DEV_BASE | 0xe0a000)
+#define TOD_REG_BASE		(TOD_BASE | 0x1ff0)
+#define TOD_NVRAM_BASE		TOD_BASE
+#define TOD_NVRAM_SIZE		0x1ff0
+#define TOD_NVRAM_LIMIT		(TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
+
+/* NS16552 SIO */
+#define SERIAL_BASE(_x)		(PORTX_DEV_BASE | 0xe08000 | ((_x) ? 0 : 0x80))
+#define N_SIO_CHANNELS		2
+#define N_COM_PORTS		N_SIO_CHANNELS
+
+/*
+ * On-board Dec21143 PCI Ethernet
+ * Note: The PCI MBAR chosen here was used from MPC8240UM which states
+ * that PCI memory is at: 0x80000 - 0xFDFFFFFF, if AMBOR[CPU_FD_ALIAS]
+ * is set, then PCI memory maps 1-1 with this address range in the
+ * correct byte order.
+ */
+#define PCI_ENET_IOADDR		0x80000000
+#define PCI_ENET_MEMADDR	0x80000000
+
+/*
+ * Flash Memory Layout
+ *
+ *    2 MB Flash Bank 0 runs in 8-bit mode.  In Flash Bank 0, the 32 kB
+ *    sector SA3 is obscured by the 32 kB serial/TOD access space, and
+ *    the 64 kB sectors SA19-SA26 are obscured by the 512 kB PLCC
+ *    containing the fixed boot ROM.  (If the 512 kB PLCC is
+ *    deconfigured by jumper, this window to Flash Bank 0 becomes
+ *    visible, but it still contains the fixed boot code and should be
+ *    considered read-only).  Flash Bank 0 sectors SA0 (16 kB), SA1 (8
+ *    kB), and SA2 (8 kB) are currently unused.
+ *
+ *    2 MB Flash Bank 1 runs in 16-bit mode.  Flash Bank 1 is fully
+ *    usable, but it's a 16-bit wide device on a 64-bit bus.  Therefore
+ *    16-bit words only exist at addresses that are multiples of 8.  All
+ *    PROM data and control addresses must be multiplied by 8.
+ *
+ *    See flashMap.c for description of flash filesystem layout.
+ */
+
+/*
+ * FLASH memory address space: 8-bit wide FLASH memory spaces.
+ */
+#define FLASH0_SEG0_START	0xffe00000	 /* Baby 32Kb segment */
+#define FLASH0_SEG0_END		0xffe07fff	 /* 16 kB + 8 kB + 8 kB */
+#define FLASH0_SEG0_SIZE	0x00008000	 /*   (sectors SA0-SA2) */
+
+#define FLASH0_SEG1_START	0xffe10000	 /* 1MB - 64Kb FLASH0 seg */
+#define FLASH0_SEG1_END		0xffefffff	 /* 960 kB */
+#define FLASH0_SEG1_SIZE	0x000f0000
+
+#define FLASH0_SEG2_START	0xfff00000	 /* Boot Loader stored here */
+#define FLASH0_SEG2_END		0xfff7ffff	 /* 512 kB FLASH0/PLCC seg */
+#define FLASH0_SEG2_SIZE	0x00080000
+
+#define FLASH0_SEG3_START	0xfff80000	 /* 512 kB FLASH0 seg */
+#define FLASH0_SEG3_END		0xffffffff
+#define FLASH0_SEG3_SIZE	0x00080000
+
+/* Where Kahlua starts */
+#define FLASH_RESET_VECT	0xfff00100
+
+/*
+ * CHRP / PREP (MAP A/B) definitions.
+ */
+
+#define PREP_REG_ADDR		0x80000cf8	/* MPC107 Config, Map A */
+#define PREP_REG_DATA		0x80000cfc	/* MPC107 Config, Map A */
+/* MPC107 (MPC8240 internal EUMBBAR mapped) */
+#define CHRP_REG_ADDR		0xfec00000	/* MPC106 Config, Map B */
+#define CHRP_REG_DATA		0xfee00000	/* MPC106 Config, Map B */
+
+/*
+ * Mousse PCI IDSEL Assignments (Device Number)
+ */
+#define MOUSSE_IDSEL_ENET	13		/* On-board 21143 Ethernet */
+#define MOUSSE_IDSEL_LPCI	14		/* On-board PCI slot */
+#define MOUSSE_IDSEL_82371	15		/* That other thing */
+#define MOUSSE_IDSEL_CPCI2	31		/* CPCI slot 2 */
+#define MOUSSE_IDSEL_CPCI3	30		/* CPCI slot 3 */
+#define MOUSSE_IDSEL_CPCI4	29		/* CPCI slot 4 */
+#define MOUSSE_IDSEL_CPCI5	28		/* CPCI slot 5 */
+#define MOUSSE_IDSEL_CPCI6	27		/* CPCI slot 6 */
+
+/*
+ * Mousse Interrupt Mapping:
+ *
+ *	IRQ1	Enet (intA|intB|intC|intD)
+ *	IRQ2	CPCI intA (See below)
+ *	IRQ3	Local PCI slot intA|intB|intC|intD
+ *	IRQ4	COM1 Serial port (Actually higher addressed port on duart)
+ *
+ * PCI Interrupt Mapping in CPCI chassis:
+ *
+ *		   |	       CPCI Slot
+ *		   | 1 (CPU)	2	3	4	5	6
+ *	-----------+--------+-------+-------+-------+-------+-------+
+ *	  intA	   |	X		X		X
+ *	  intB	   |		X		X		X
+ *	  intC	   |	X		X		X
+ *	  intD	   |		X		X		X
+ */
+
+
+#define EPIC_VECTOR_EXT0	0
+#define EPIC_VECTOR_EXT1	1
+#define EPIC_VECTOR_EXT2	2
+#define EPIC_VECTOR_EXT3	3
+#define EPIC_VECTOR_EXT4	4
+#define EPIC_VECTOR_TM0		16
+#define EPIC_VECTOR_TM1		17
+#define EPIC_VECTOR_TM2		18
+#define EPIC_VECTOR_TM3		19
+#define EPIC_VECTOR_I2C		20
+#define EPIC_VECTOR_DMA0	21
+#define EPIC_VECTOR_DMA1	22
+#define EPIC_VECTOR_I2O		23
+
+
+#define INT_VEC_IRQ0		0
+#define INT_NUM_IRQ0		INT_VEC_IRQ0
+#define MOUSSE_IRQ_ENET		EPIC_VECTOR_EXT1	/* Hardwired */
+#define MOUSSE_IRQ_CPCI		EPIC_VECTOR_EXT2	/* Hardwired */
+#define MOUSSE_IRQ_LPCI		EPIC_VECTOR_EXT3	/* Hardwired */
+#define MOUSSE_IRQ_DUART	EPIC_VECTOR_EXT4	/* Hardwired */
+
+/* Onboard DEC 21143 Ethernet */
+#define PCI_ENET_MEMADDR	0x80000000
+#define PCI_ENET_IOADDR		0x80000000
+
+/* Some other PCI device */
+#define PCI_SLOT_MEMADDR	0x81000000
+#define PCI_SLOT_IOADDR		0x81000000
+
+/* Promise ATA66 PCI Device (ATA controller) */
+#define PROMISE_MBAR0  0xa0000000
+#define PROMISE_MBAR1  (PROMISE_MBAR0 + 0x1000)
+#define PROMISE_MBAR2  (PROMISE_MBAR0 + 0x2000)
+#define PROMISE_MBAR3  (PROMISE_MBAR0 + 0x3000)
+#define PROMISE_MBAR4  (PROMISE_MBAR0 + 0x4000)
+#define PROMISE_MBAR5  (PROMISE_MBAR0 + 0x5000)
+
+/* ATA/66 Controller offsets */
+#define CFG_ATA_BASE_ADDR     PROMISE_MBAR0
+#define CFG_IDE_MAXBUS	       2 /* ide0/ide1 */
+#define CFG_IDE_MAXDEVICE      2 /* 2 drives per controller */
+#define CFG_ATA_IDE0_OFFSET    0
+#define CFG_ATA_IDE1_OFFSET    0x3000
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define CFG_ATA_DATA_OFFSET    0
+#define CFG_ATA_REG_OFFSET     0
+#define CFG_ATA_ALT_OFFSET    (0x1000)
+
+/*
+ * The constants ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, and RAM_LOW_ADRS
+ * are defined in config.h and Makefile.
+ * All definitions for these constants must be identical.
+ */
+#define ROM_BASE_ADRS		0xfff00000	/* base address of ROM */
+#define ROM_TEXT_ADRS		(ROM_BASE_ADRS+0x0100) /* with PC & SP */
+#define ROM_WARM_ADRS		(ROM_TEXT_ADRS+0x0004) /* warm reboot entry */
+#define ROM_SIZE		0x00080000	/* 512KB ROM space */
+#define RAM_LOW_ADRS		0x00010000   /* RAM address for vxWorks */
+#define RAM_HIGH_ADRS		0x00c00000   /* RAM address for bootrom */
+
+/*
+ *  NVRAM configuration
+ *  NVRAM is implemented via the SGS Thomson M48T59Y
+ *  64Kbit (8Kbx8) Timekeeper SRAM.
+ *  This 8KB NVRAM also has a TOD. See m48t59y.{h,c} for more information.
+ */
+
+#define NV_RAM_ADRS		TOD_NVRAM_BASE
+#define NV_RAM_INTRVL		1
+#define NV_RAM_WR_ENBL		SYS_TOD_UNPROTECT()
+#define NV_RAM_WR_DSBL		SYS_TOD_PROTECT()
+
+#define NV_OFF_BOOT0		0x0000	/* Boot string 0 (256b) */
+#define NV_OFF_BOOT1		0x0100	/* Boot string 1 (256b) */
+#define NV_OFF_BOOT2		0x0200	/* Boot string 2 (256b)*/
+#define NV_OFF_MACADDR		0x0400	/* 21143 MAC address (6b) */
+#define NV_OFF_ACTIVEBOOT	0x0406	/* Active boot string, 0 to 2 (1b) */
+#define NV_OFF_UNUSED1		0x0407	/* Unused (1b) */
+#define NV_OFF_BINDFIX		0x0408	/* See sysLib.c:sysBindFix() (1b) */
+#define NV_OFF_UNUSED2		0x0409	/* Unused (7b) */
+#define NV_OFF_TIMEZONE		0x0410	/* TIMEZONE env var (64b) */
+#define NV_OFF_VXWORKS_END	0x07FF	/* 2047 VxWorks Total */
+#define NV_OFF_U_BOOT		0x0800	/* 2048 U-Boot boot-loader */
+#define NV_OFF_U_BOOT_ADDR	(TOD_BASE + NV_OFF_U_BOOT) /* sysaddr*/
+#define NV_U_BOOT_ENV_SIZE	2048	/* 2K - U-Boot Total */
+#define NV_OFF__next_free	(NV_U_BOOT_ENVSIZE +1)
+#define NV_RAM_SIZE		8176	/* NVRAM End */
+
+#endif /* __MOUSSE_H */
diff --git a/board/mvs1/README b/board/mvs1/README
new file mode 100644
index 00000000000..6c66d677207
--- /dev/null
+++ b/board/mvs1/README
@@ -0,0 +1,15 @@
+This port is for the MATRIX Vision mvSensor.
+It is an mpc823-based universal image processing board
+with CMOS or CCD sensor, 4MB FLASH and 16-64MB RAM.
+
+See http://www.matrix-vision.de for more details or mail...
+
+mvsensor@matrix-vision.de
+
+Howard Gray
+MATRIX Vision GmbH
+Talstr. 16
+D-71570
+Oppenweiler
+Germany
+
diff --git a/board/mvs1/mvs1.c b/board/mvs1/mvs1.c
new file mode 100644
index 00000000000..da98de56c65
--- /dev/null
+++ b/board/mvs1/mvs1.c
@@ -0,0 +1,404 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Changes for MATRIX Vision MVsensor (C) Copyright 2001
+ * MATRIX Vision GmbH / hg, info@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
+	0x1FF5FC47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1F0DFC04 /*0x1F2DFC04??*/, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x7FFFFC07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: MATRIX Vision MVsensor\n");
+	return 0;
+}
+
+
+
+#ifdef DO_RAM_TEST
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Test SDRAM by writing its address to itself and reading several times
+*/
+#define READ_RUNS 4
+static void test_dram (unsigned long *start, unsigned long *end)
+{
+	unsigned long *addr;
+	unsigned long value;
+	int read_runs, errors, addr_errors;
+
+	printf ("\nChecking SDRAM from %p to %p\n", start, end);
+	udelay (1000000);
+	for (addr = start; addr < end; addr++)
+		*addr = (unsigned long) addr;
+
+	for (addr = start, addr_errors = 0; addr < end; addr++) {
+		for (read_runs = READ_RUNS, errors = 0; read_runs > 0; read_runs--) {
+			if ((value = *addr) != (unsigned long) addr)
+				errors++;
+		}
+		if (errors > 0) {
+			addr_errors++;
+			printf ("SDRAM errors (%d) at %p, last read  = %ld\n",
+					errors, addr, value);
+			udelay (10000);
+		}
+	}
+	printf ("SDRAM check finished, total errors = %d\n", addr_errors);
+}
+#endif							/*  DO_RAM_TEST */
+
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0, size_b1, size8, size9;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+	 * preliminary addresses - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+	memctl->memc_or2 = CFG_OR2_PRELIM;
+	memctl->memc_br2 = CFG_BR2_PRELIM;
+
+#if defined (CFG_OR3_PRELIM) && defined (CFG_BR3_PRELIM)
+	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
+		memctl->memc_or3 = CFG_OR3_PRELIM;
+		memctl->memc_br3 = CFG_BR3_PRELIM;
+	}
+#endif
+
+	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
+	udelay (1);
+	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
+	udelay (1);
+
+	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
+		memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
+		udelay (1);
+		memctl->memc_mcr = 0x80006230;	/* SDRAM bank 1 - execute twice */
+		udelay (1);
+	}
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	udelay (1000);
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	udelay (1000);
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
+					   SDRAM_MAX_SIZE);
+
+	if (size8 < size9) {		/* leave configuration at 9 columns */
+		size_b0 = size9;
+	} else {					/* back to 8 columns            */
+		size_b0 = size8;
+		memctl->memc_mamr = CFG_MAMR_8COL;
+		udelay (500);
+	}
+
+	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
+		/*
+		 * Check Bank 1 Memory Size
+		 * use current column settings
+		 * [9 column SDRAM may also be used in 8 column mode,
+		 *  but then only half the real size will be used.]
+		 */
+#if defined (SDRAM_BASE3_PRELIM)
+		size_b1 =
+				dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
+						   SDRAM_MAX_SIZE);
+#else
+		size_b1 = 0;
+#endif
+	} else {
+		size_b1 = 0;
+	}
+
+	udelay (1000);
+
+	/*
+	 * Adjust refresh rate depending on SDRAM type, both banks
+	 * For types > 128 MBit leave it at the current (fast) rate
+	 */
+	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
+		/* reduce to 15.6 us (62.4 us / quad) */
+		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		udelay (1000);
+	}
+
+	/*
+	 * Final mapping: map bigger bank first
+	 */
+	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
+
+		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_br3 =
+				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+		if (size_b0 > 0) {
+			/*
+			 * Position Bank 0 immediately above Bank 1
+			 */
+			memctl->memc_or2 =
+					((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			memctl->memc_br2 =
+					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					+ size_b1;
+		} else {
+			unsigned long reg;
+
+			/*
+			 * No bank 0
+			 *
+			 * invalidate bank
+			 */
+			memctl->memc_br2 = 0;
+
+			/* adjust refresh rate depending on SDRAM type, one bank */
+			reg = memctl->memc_mptpr;
+			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			memctl->memc_mptpr = reg;
+		}
+
+	} else {					/* SDRAM Bank 0 is bigger - map first   */
+
+		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_br2 =
+				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+		if (size_b1 > 0) {
+			/*
+			 * Position Bank 1 immediately above Bank 0
+			 */
+			memctl->memc_or3 =
+					((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			memctl->memc_br3 =
+					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					+ size_b0;
+		} else {
+			unsigned long reg;
+
+			/*
+			 * No bank 1
+			 *
+			 * invalidate bank
+			 */
+			memctl->memc_br3 = 0;
+
+			/* adjust refresh rate depending on SDRAM type, one bank */
+			reg = memctl->memc_mptpr;
+			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			memctl->memc_mptpr = reg;
+		}
+	}
+
+	udelay (10000);
+
+#ifdef DO_RAM_TEST
+	if (size_b0 > 0)
+		test_dram ((unsigned long *) CFG_SDRAM_BASE,
+				   (unsigned long *) (CFG_SDRAM_BASE + size_b0));
+#endif
+
+	return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	long int cnt, val;
+
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		return (0);
+	}
+
+	for (cnt = 1;; cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	/* NOTREACHED */
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+u8 *dhcp_vendorex_prep (u8 * e)
+{
+	char *ptr;
+
+/* DHCP vendor-class-identifier = 60 */
+	if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
+		*e++ = 60;
+		*e++ = strlen (ptr);
+		while (*ptr)
+			*e++ = *ptr++;
+	}
+/* my DHCP_CLIENT_IDENTIFIER = 61 */
+	if ((ptr = getenv ("dhcp_client_id"))) {
+		*e++ = 61;
+		*e++ = strlen (ptr);
+		while (*ptr)
+			*e++ = *ptr++;
+	}
+
+	return e;
+}
+
+
+/* ------------------------------------------------------------------------- */
+u8 *dhcp_vendorex_proc (u8 * popt)
+{
+	return NULL;
+}
diff --git a/board/ppmc8260/ppmc8260.c b/board/ppmc8260/ppmc8260.c
new file mode 100644
index 00000000000..ab32622c205
--- /dev/null
+++ b/board/ppmc8260/ppmc8260.c
@@ -0,0 +1,307 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+        /* PA31 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 *ATMTXEN */
+	/* PA30 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTCA   */
+	/* PA29 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTSOC  */
+	/* PA28 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 *ATMRXEN */
+	/* PA27 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRSOC */
+	/* PA26 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRCA */
+	/* PA25 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[0] */
+	/* PA24 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[1] */
+	/* PA23 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[2] */
+	/* PA22 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[3] */
+	/* PA21 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[4] */
+	/* PA20 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[5] */
+	/* PA19 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[6] */
+	/* PA18 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[7] */
+	/* PA17 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
+	/* PA16 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
+	/* PA15 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
+	/* PA14 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
+	/* PA13 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
+	/* PA12 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
+	/* PA11 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
+	/* PA10 */ {   0,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
+	/* PA9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC2 TXD */
+	/* PA8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC2 RXD */
+	/* PA7  */ {   1,   0,   0,   1,   0,   0   }, /* TDM_A1:L1TSYNC */
+	/* PA6  */ {   1,   0,   0,   1,   0,   0   }, /* TDN_A1:L1RSYNC */
+	/* PA5  */ {   0,   0,   0,   0,   0,   0   }, /* PA5 */
+	/* PA4  */ {   0,   0,   0,   0,   0,   0   }, /* PA4 */
+	/* PA3  */ {   0,   0,   0,   0,   0,   0   }, /* PA3 */
+	/* PA2  */ {   0,   0,   0,   0,   0,   0   }, /* PA2 */
+	/* PA1  */ {   0,   0,   0,   0,   0,   0   }, /* PA1 */
+	/* PA0  */ {   0,   0,   0,   0,   0,   0   }  /* PA0 */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   0,   0,   0,   0,   0,   0   }, /* PB17 */
+	/* PB16 */ {   1,   0,   0,   0,   0,   0   }, /* TDM_A1:L1CLK0 */
+	/* PB15 */ {   1,   0,   0,   1,   0,   1   }, /* /FETHRST */
+	/* PB14 */ {   1,   0,   0,   1,   0,   0   }, /* FETHDIS */
+	/* PB13 */ {   0,   0,   0,   0,   0,   0   }, /* PB13 */
+	/* PB12 */ {   1,   0,   0,   1,   0,   0   }, /* TDM_B1:L1CLK0 */
+	/* PB11 */ {   1,   0,   0,   1,   0,   0   }, /* TDM_D1:L1TXD */
+	/* PB10 */ {   1,   0,   0,   1,   0,   0   }, /* TDM_D1:L1RXD */
+	/* PB9  */ {   1,   0,   0,   1,   0,   0   }, /* TDM_D1:L1TSYNC */
+	/* PB8  */ {   1,   0,   0,   1,   0,   0   }, /* TDM_D1:L1RSYNC */
+	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
+	/* PB6  */ {   0,   0,   0,   0,   0,   0   }, /* PB6 */
+	/* PB5  */ {   0,   0,   0,   0,   0,   0   }, /* PB5 */
+	/* PB4  */ {   0,   0,   0,   0,   0,   0   }, /* PB4 */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,   0,   0,   0,   0   }, /* PC31 */
+	/* PC30 */ {   0,   0,   0,   0,   0,   0   }, /* PC30 */
+	/* PC29 */ {   0,   0,   0,   0,   0,   0   }, /* PC28 */
+	/* PC28 */ {   1,   1,   0,   0,   0,   0   }, /* CLK4 */
+	/* PC27 */ {   0,   0,   0,   0,   0,   0   }, /* PC27 */
+	/* PC26 */ {   0,   0,   0,   0,   0,   0   }, /* PC26 */
+	/* PC25 */ {   1,   1,   0,   0,   0,   0   }, /* CLK7 */
+	/* PC24 */ {   0,   0,   0,   0,   0,   0   }, /* PC24 */
+	/* PC23 */ {   1,   0,   0,   1,   0,   0   }, /* ATMTFCLK */
+	/* PC22 */ {   0,   0,   0,   0,   0,   0   }, /* PC22 */
+	/* PC21 */ {   0,   0,   0,   0,   0,   0   }, /* PC23 */
+	/* PC20 */ {   0,   0,   0,   0,   0,   0   }, /* PC24 */
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
+	/* PC17 */ {   0,   0,   0,   0,   0,   0   }, /* PC17 */
+	/* PC16 */ {   0,   0,   0,   0,   0,   0   }, /* PC16 */
+	/* PC15 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:TxAddr[0] */
+	/* PC14 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:RxAddr[0] */
+	/* PC13 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:TxAddr[1] */
+	/* PC12 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:RxAddr[1] */
+	/* PC11 */ {   1,   1,   0,   1,   0,   0   }, /* TDM_D1:L1CLK0 */
+	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MDC */
+	/* PC9  */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MDIO */
+	/* PC8  */ {   0,   0,   0,   0,   0,   0   }, /* PC8 */
+	/* PC7  */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:TxAddr[2]*/
+	/* PC6  */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:RxAddr[2] */
+	/* PC5  */ {   0,   0,   0,   0,   0,   0   }, /* PC5 */
+	/* PC4  */ {   0,   0,   0,   0,   0,   0   }, /* PC4 */
+	/* PC3  */ {   1,   0,   0,   1,   0,   0   }, /* IDMA2:DACK */
+	/* PC2  */ {   1,   0,   0,   1,   0,   0   }, /* IDMA2:DONE */
+	/* PC1  */ {   1,   0,   0,   1,   0,   0   }, /* IDMA2:DREQ */
+	/* PC0  */ {   1,   0,   0,   1,   0,   0   }, /* IDMA1:DREQ */
+    },
+
+    /* Port D */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   0,   0,   0,   0,   0,   0   }, /* PD31 */
+	/* PD30 */ {   0,   0,   0,   0,   0,   0   }, /* PD30 */
+	/* PD29 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1:RxAddr[3] */
+	/* PD28 */ {   0,   0,   0,   0,   0,   0   }, /* PD28 */
+	/* PD27 */ {   0,   0,   0,   0,   0,   0   }, /* PD27 */
+	/* PD26 */ {   1,   0,   0,   1,   0,   0   }, /* TDM_C1:L1RSYNC */
+	/* PD25 */ {   0,   0,   0,   0,   0,   0   }, /* PD25 */
+	/* PD24 */ {   0,   0,   0,   0,   0,   0   }, /* PD24 */
+	/* PD23 */ {   0,   0,   0,   0,   0,   0   }, /* PD23 */
+	/* PD22 */ {   0,   0,   0,   0,   0,   0   }, /* PD22 */
+	/* PD21 */ {   0,   0,   0,   0,   0,   0   }, /* PD21 */
+	/* PD20 */ {   0,   0,   0,   0,   0,   0   }, /* PD20 */
+	/* PD19 */ {   0,   0,   0,   0,   0,   0   }, /* PD19 */
+	/* PD18 */ {   0,   0,   0,   0,   0,   0   }, /* PD19 */
+	/* PD17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
+	/* PD16 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+	/* PD13 */ {   1,   0,   0,   0,   0,   0   }, /* TDM_B1:L1TXD */
+	/* PD12 */ {   1,   0,   0,   0,   0,   0   }, /* TDM_B1:L1RXD */
+	/* PD11 */ {   1,   0,   0,   0,   0,   0   }, /* TDM_B1:L1TSYNC */
+	/* PD10 */ {   1,   0,   0,   0,   0,   0   }, /* TDM_B1:L1RSYNC*/
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1:TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1:RXD */
+	/* PD7  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1:SMSYN */
+	/* PD6  */ {   1,   0,   0,   1,   0,   0   }, /* IDMA1:DACK */
+	/* PD5  */ {   1,   0,   0,   1,   0,   0   }, /* IDMA1:DONE */
+	/* PD4  */ {   0,   0,   0,   0,   0,   0   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: Wind River PPMC8260\n");
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	volatile uchar c = 0xff;
+	volatile uchar *ramaddr0 = (uchar *) (CFG_SDRAM0_BASE);
+	volatile uchar *ramaddr1 = (uchar *) (CFG_SDRAM1_BASE);
+	ulong psdmr = CFG_PSDMR;
+	volatile uchar *ramaddr2 = (uchar *) (CFG_SDRAM2_BASE);
+	ulong lsdmr = CFG_LSDMR;
+	int i;
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 */
+
+	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CFG_MPTPR;
+
+#ifndef CFG_RAMBOOT
+	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+	*ramaddr0++ = c;
+	*ramaddr1++ = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++) {
+		*ramaddr0++ = c;
+		*ramaddr1++ = c;
+	}
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+	ramaddr0 = (uchar *) (CFG_SDRAM0_BASE + 0x110);
+	ramaddr1 = (uchar *) (CFG_SDRAM1_BASE + 0x110);
+	*ramaddr0 = c;
+	*ramaddr1 = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr0 = c;
+	*ramaddr1 = c;
+
+	memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA;
+	*ramaddr2++ = c;
+
+	memctl->memc_lsdmr = lsdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++) {
+		*ramaddr2++ = c;
+	}
+
+	memctl->memc_lsdmr = lsdmr | PSDMR_OP_MRW;
+	*ramaddr2++ = c;
+
+	memctl->memc_lsdmr = lsdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr2 = c;
+#endif
+
+	/* return total ram size */
+	return ((CFG_SDRAM0_SIZE + CFG_SDRAM1_SIZE) * 1024 * 1024);
+}
+
+#ifdef CONFIG_MISC_INIT_R
+/* ------------------------------------------------------------------------- */
+int misc_init_r (void)
+{
+#ifdef CFG_LED_BASE
+	uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+	uchar ss;
+	uchar tmp[64];
+	int res;
+
+	if ((ds != 0) && (ds != 0xff)) {
+		res = getenv_r ("ethaddr", tmp, sizeof (tmp));
+		if (res > 0) {
+			ss = ((ds >> 4) & 0x0f);
+			ss += ss < 0x0a ? '0' : ('a' - 10);
+			tmp[15] = ss;
+
+			ss = (ds & 0x0f);
+			ss += ss < 0x0a ? '0' : ('a' - 10);
+			tmp[16] = ss;
+
+			tmp[17] = '\0';
+			setenv ("ethaddr", tmp);
+			/* set the led to show the address */
+			*((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+		}
+	}
+#endif /* CFG_LED_BASE */
+	return (0);
+}
+#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/ppmc8260/strataflash.c b/board/ppmc8260/strataflash.c
new file mode 100644
index 00000000000..bb2184895bd
--- /dev/null
+++ b/board/ppmc8260/strataflash.c
@@ -0,0 +1,755 @@
+/*
+ * (C) Copyright 2002
+ * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/processor.h>
+
+#undef  DEBUG_FLASH
+/*
+ * This file implements a Common Flash Interface (CFI) driver for U-Boot.
+ * The width of the port and the width of the chips are determined at initialization.
+ * These widths are used to calculate the address for access CFI data structures.
+ * It has been tested on an Intel Strataflash implementation.
+ *
+ * References
+ * JEDEC Standard JESD68 - Common Flash Interface (CFI)
+ * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
+ * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
+ * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
+ *
+ * TODO
+ * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
+ * Add support for other command sets Use the PRI and ALT to determine command set
+ * Verify erase and program timeouts.
+ */
+
+#define FLASH_CMD_CFI			0x98
+#define FLASH_CMD_READ_ID		0x90
+#define FLASH_CMD_RESET			0xff
+#define FLASH_CMD_BLOCK_ERASE		0x20
+#define FLASH_CMD_ERASE_CONFIRM		0xD0
+#define FLASH_CMD_WRITE			0x40
+#define FLASH_CMD_PROTECT		0x60
+#define FLASH_CMD_PROTECT_SET		0x01
+#define FLASH_CMD_PROTECT_CLEAR		0xD0
+#define FLASH_CMD_CLEAR_STATUS		0x50
+#define FLASH_CMD_WRITE_TO_BUFFER       0xE8
+#define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
+
+#define FLASH_STATUS_DONE		0x80
+#define FLASH_STATUS_ESS		0x40
+#define FLASH_STATUS_ECLBS		0x20
+#define FLASH_STATUS_PSLBS		0x10
+#define FLASH_STATUS_VPENS		0x08
+#define FLASH_STATUS_PSS		0x04
+#define FLASH_STATUS_DPS		0x02
+#define FLASH_STATUS_R			0x01
+#define FLASH_STATUS_PROTECT		0x01
+
+#define FLASH_OFFSET_CFI		0x55
+#define FLASH_OFFSET_CFI_RESP		0x10
+#define FLASH_OFFSET_WTOUT		0x1F
+#define FLASH_OFFSET_WBTOUT             0x20
+#define FLASH_OFFSET_ETOUT		0x21
+#define FLASH_OFFSET_CETOUT             0x22
+#define FLASH_OFFSET_WMAX_TOUT		0x23
+#define FLASH_OFFSET_WBMAX_TOUT         0x24
+#define FLASH_OFFSET_EMAX_TOUT		0x25
+#define FLASH_OFFSET_CEMAX_TOUT         0x26
+#define FLASH_OFFSET_SIZE		0x27
+#define FLASH_OFFSET_INTERFACE          0x28
+#define FLASH_OFFSET_BUFFER_SIZE        0x2A
+#define FLASH_OFFSET_NUM_ERASE_REGIONS	0x2C
+#define FLASH_OFFSET_ERASE_REGIONS	0x2D
+#define FLASH_OFFSET_PROTECT		0x02
+#define FLASH_OFFSET_USER_PROTECTION    0x85
+#define FLASH_OFFSET_INTEL_PROTECTION   0x81
+
+
+#define FLASH_MAN_CFI			0x01000000
+
+
+
+
+typedef union {
+	unsigned char c;
+	unsigned short w;
+	unsigned long l;
+} cfiword_t;
+
+typedef union {
+	unsigned char * cp;
+	unsigned short *wp;
+	unsigned long *lp;
+} cfiptr_t;
+
+#define NUM_ERASE_REGIONS 4
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+
+
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c);
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf);
+static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
+static int flash_detect_cfi(flash_info_t * info);
+static ulong flash_get_size (ulong base, int banknum);
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword);
+static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt);
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len);
+#endif
+/*-----------------------------------------------------------------------
+ * create an address based on the offset and the port width
+ */
+inline uchar * flash_make_addr(flash_info_t * info, int sect, int offset)
+{
+	return ((uchar *)(info->start[sect] + (offset * info->portwidth)));
+}
+/*-----------------------------------------------------------------------
+ * read a character at a port width address
+ */
+inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
+{
+	uchar *cp;
+	cp = flash_make_addr(info, 0, offset);
+	return (cp[info->portwidth - 1]);
+}
+
+/*-----------------------------------------------------------------------
+ * read a short word by swapping for ppc format.
+ */
+ushort flash_read_ushort(flash_info_t * info, int sect,  uchar offset)
+{
+    uchar * addr;
+
+    addr = flash_make_addr(info, sect, offset);
+    return ((addr[(2*info->portwidth) - 1] << 8) | addr[info->portwidth - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ * read a long word by picking the least significant byte of each maiximum
+ * port size word. Swap for ppc format.
+ */
+ulong flash_read_long(flash_info_t * info, int sect,  uchar offset)
+{
+    uchar * addr;
+
+    addr = flash_make_addr(info, sect, offset);
+    return ( (addr[(2*info->portwidth) - 1] << 24 ) | (addr[(info->portwidth) -1] << 16) |
+	    (addr[(4*info->portwidth) - 1] << 8) | addr[(3*info->portwidth) - 1]);
+
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size;
+	int i;
+	unsigned long  address;
+
+
+	/* The flash is positioned back to back, with the demultiplexing of the chip
+	 * based on the A24 address line.
+	 *
+	 */
+
+	address = CFG_FLASH_BASE;
+	size = 0;
+
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		size += flash_info[i].size = flash_get_size(address, i);
+		address += CFG_FLASH_INCREMENT;
+		if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",i,
+				flash_info[0].size, flash_info[i].size<<20);
+		}
+	}
+
+	/* Monitor protection ON by default */
+#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
+	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++)
+		(void)flash_real_protect(&flash_info[0], i, 1);
+#endif
+
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int rcode = 0;
+	int prot;
+	int sect;
+
+	if( info->flash_id != FLASH_MAN_CFI) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) { /* not protected */
+			flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
+			flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
+			flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
+
+			if(flash_full_status_check(info, sect, info->erase_blk_tout, "erase")) {
+				rcode = 1;
+			} else
+				printf(".");
+		}
+	}
+	printf (" done\n");
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id != FLASH_MAN_CFI) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	printf("CFI conformant FLASH (%d x %d)",
+	       (info->portwidth	 << 3 ), (info->chipwidth  << 3 ));
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+	printf(" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
+	       info->erase_blk_tout, info->write_tout, info->buffer_write_tout, info->buffer_size);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n");
+		printf (" %08lX%5s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : " "
+			);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong wp;
+	ulong cp;
+	int aln;
+	cfiword_t cword;
+	int i, rc;
+
+	/* get lower aligned address */
+	wp = (addr & ~(info->portwidth - 1));
+
+	/* handle unaligned start */
+	if((aln = addr - wp) != 0) {
+		cword.l = 0;
+		cp = wp;
+		for(i=0;i<aln; ++i, ++cp)
+			flash_add_byte(info, &cword, (*(uchar *)cp));
+
+		for(; (i< info->portwidth) && (cnt > 0) ; i++) {
+			flash_add_byte(info, &cword, *src++);
+			cnt--;
+			cp++;
+		}
+		for(; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
+			flash_add_byte(info, &cword, (*(uchar *)cp));
+		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+			return rc;
+		wp = cp;
+	}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+	while(cnt >= info->portwidth) {
+		i = info->buffer_size > cnt? cnt: info->buffer_size;
+		if((rc = flash_write_cfibuffer(info, wp, src,i)) != ERR_OK)
+			return rc;
+		wp += i;
+		src += i;
+		cnt -=i;
+	}
+#else
+	/* handle the aligned part */
+	while(cnt >= info->portwidth) {
+		cword.l = 0;
+		for(i = 0; i < info->portwidth; i++) {
+			flash_add_byte(info, &cword, *src++);
+		}
+		if((rc = flash_write_cfiword(info, wp, cword)) != 0)
+			return rc;
+		wp += info->portwidth;
+		cnt -= info->portwidth;
+	}
+#endif /* CFG_FLASH_USE_BUFFER_WRITE */
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	cword.l = 0;
+	for (i=0, cp=wp; (i<info->portwidth) && (cnt>0); ++i, ++cp) {
+		flash_add_byte(info, &cword, *src++);
+		--cnt;
+	}
+	for (; i<info->portwidth; ++i, ++cp) {
+		flash_add_byte(info, & cword, (*(uchar *)cp));
+	}
+
+	return flash_write_cfiword(info, wp, cword);
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_real_protect(flash_info_t *info, long sector, int prot)
+{
+	int retcode = 0;
+
+	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
+	if(prot)
+		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
+	else
+		flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
+
+	if((retcode = flash_full_status_check(info, sector, info->erase_blk_tout,
+					 prot?"protect":"unprotect")) == 0) {
+
+		info->protect[sector] = prot;
+		/* Intel's unprotect unprotects all locking */
+		if(prot == 0) {
+			int i;
+			for(i = 0 ; i<info->sector_count; i++) {
+				if(info->protect[i])
+					flash_real_protect(info, i, 1);
+			}
+		}
+	}
+
+	return retcode;
+}
+/*-----------------------------------------------------------------------
+ *  wait for XSR.7 to be set. Time out with an error if it does not.
+ *  This routine does not set the flash to read-array mode.
+ */
+static int flash_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+{
+	ulong start;
+
+	/* Wait for command completion */
+	start = get_timer (0);
+	while(!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
+		if (get_timer(start) > info->erase_blk_tout) {
+			printf("Flash %s timeout at address %lx\n", prompt, info->start[sector]);
+			flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+			return ERR_TIMOUT;
+		}
+	}
+	return ERR_OK;
+}
+/*-----------------------------------------------------------------------
+ * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
+ * This routine sets the flash to read-array mode.
+ */
+static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout, char * prompt)
+{
+	int retcode;
+	retcode = flash_status_check(info, sector, tout, prompt);
+	if((retcode == ERR_OK) && !flash_isequal(info,sector, 0, FLASH_STATUS_DONE)) {
+		retcode = ERR_INVAL;
+		printf("Flash %s error at address %lx\n", prompt,info->start[sector]);
+		if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)){
+			printf("Command Sequence Error.\n");
+		} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
+			printf("Block Erase Error.\n");
+		        retcode = ERR_NOT_ERASED;
+		} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
+			printf("Locking Error\n");
+		}
+		if(flash_isset(info, sector, 0, FLASH_STATUS_DPS)){
+			printf("Block locked.\n");
+			retcode = ERR_PROTECTED;
+		}
+		if(flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
+			printf("Vpp Low Error.\n");
+	}
+	flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
+	return retcode;
+}
+/*-----------------------------------------------------------------------
+ */
+static void flash_add_byte(flash_info_t *info, cfiword_t * cword, uchar c)
+{
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cword->c = c;
+		break;
+	case FLASH_CFI_16BIT:
+		cword->w = (cword->w << 8) | c;
+		break;
+	case FLASH_CFI_32BIT:
+		cword->l = (cword->l << 8) | c;
+	}
+}
+
+
+/*-----------------------------------------------------------------------
+ * make a proper sized command based on the port and chip widths
+ */
+static void flash_make_cmd(flash_info_t * info, uchar cmd, void * cmdbuf)
+{
+	int i;
+	uchar *cp = (uchar *)cmdbuf;
+	for(i=0; i< info->portwidth; i++)
+		*cp++ = ((i+1) % info->chipwidth) ? '\0':cmd;
+}
+
+/*
+ * Write a proper sized command to the correct address
+ */
+static void flash_write_cmd(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+
+	volatile cfiptr_t addr;
+	cfiword_t cword;
+	addr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		*addr.cp = cword.c;
+		break;
+	case FLASH_CFI_16BIT:
+		*addr.wp = cword.w;
+		break;
+	case FLASH_CFI_32BIT:
+		*addr.lp = cword.l;
+		break;
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+	cptr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = (cptr.cp[0] == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		retval = (cptr.wp[0] == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		retval = (cptr.lp[0] == cword.l);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
+}
+/*-----------------------------------------------------------------------
+ */
+static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
+{
+	cfiptr_t cptr;
+	cfiword_t cword;
+	int retval;
+	cptr.cp = flash_make_addr(info, sect, offset);
+	flash_make_cmd(info, cmd, &cword);
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		retval = ((cptr.cp[0] & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		retval = ((cptr.wp[0] & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		retval = ((cptr.lp[0] & cword.l) == cword.l);
+		break;
+	default:
+		retval = 0;
+		break;
+	}
+	return retval;
+}
+
+/*-----------------------------------------------------------------------
+ * detect if flash is compatible with the Common Flash Interface (CFI)
+ * http://www.jedec.org/download/search/jesd68.pdf
+ *
+*/
+static int flash_detect_cfi(flash_info_t * info)
+{
+
+	for(info->portwidth=FLASH_CFI_8BIT; info->portwidth <= FLASH_CFI_32BIT;
+	    info->portwidth <<= 1) {
+		for(info->chipwidth =FLASH_CFI_BY8;
+		    info->chipwidth <= info->portwidth;
+		    info->chipwidth <<= 1) {
+			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+			flash_write_cmd(info, 0, FLASH_OFFSET_CFI, FLASH_CMD_CFI);
+			if(flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP,'Q') &&
+			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1, 'R') &&
+			   flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2, 'Y'))
+				return 1;
+		}
+	}
+	return 0;
+}
+/*
+ * The following code cannot be run from FLASH!
+ *
+ */
+static ulong flash_get_size (ulong base, int banknum)
+{
+	flash_info_t * info = &flash_info[banknum];
+	int i, j;
+	int sect_cnt;
+	unsigned long sector;
+	unsigned long tmp;
+	int size_ratio;
+	uchar num_erase_regions;
+	int  erase_region_size;
+	int  erase_region_count;
+
+	info->start[0] = base;
+
+	if(flash_detect_cfi(info)){
+		size_ratio = info->portwidth / info->chipwidth;
+		num_erase_regions = flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
+#ifdef DEBUG_FLASH
+		printf("found %d erase regions\n", num_erase_regions);
+#endif
+		sect_cnt = 0;
+		sector = base;
+		for(i = 0 ; i < num_erase_regions; i++) {
+			if(i > NUM_ERASE_REGIONS) {
+				printf("%d erase regions found, only %d used\n",
+				       num_erase_regions, NUM_ERASE_REGIONS);
+				break;
+			}
+			tmp = flash_read_long(info, 0, FLASH_OFFSET_ERASE_REGIONS);
+			erase_region_size = (tmp & 0xffff)? ((tmp & 0xffff) * 256): 128;
+			tmp >>= 16;
+			erase_region_count = (tmp & 0xffff) +1;
+			for(j = 0; j< erase_region_count; j++) {
+				info->start[sect_cnt] = sector;
+				sector += (erase_region_size * size_ratio);
+				info->protect[sect_cnt] = flash_isset(info, sect_cnt, FLASH_OFFSET_PROTECT, FLASH_STATUS_PROTECT);
+				sect_cnt++;
+			}
+		}
+
+		info->sector_count = sect_cnt;
+		/* multiply the size by the number of chips */
+		info->size = (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) * size_ratio;
+		info->buffer_size = (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
+		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
+		info->erase_blk_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
+		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
+		info->buffer_write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
+		tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
+		info->write_tout = (tmp * (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT)))/ 1000;
+		info->flash_id = FLASH_MAN_CFI;
+	}
+
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+	return(info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+static int flash_write_cfiword (flash_info_t *info, ulong dest, cfiword_t cword)
+{
+
+	cfiptr_t ctladdr;
+	cfiptr_t cptr;
+	int flag;
+
+	ctladdr.cp = flash_make_addr(info, 0, 0);
+	cptr.cp = (uchar *)dest;
+
+
+	/* Check if Flash is (sufficiently) erased */
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		flag = ((cptr.cp[0] & cword.c) == cword.c);
+		break;
+	case FLASH_CFI_16BIT:
+		flag = ((cptr.wp[0] & cword.w) == cword.w);
+		break;
+	case FLASH_CFI_32BIT:
+		flag = ((cptr.lp[0] & cword.l)	== cword.l);
+		break;
+	default:
+		return 2;
+	}
+	if(!flag)
+		return 2;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
+
+	switch(info->portwidth) {
+	case FLASH_CFI_8BIT:
+		cptr.cp[0] = cword.c;
+		break;
+	case FLASH_CFI_16BIT:
+		cptr.wp[0] = cword.w;
+		break;
+	case FLASH_CFI_32BIT:
+		cptr.lp[0] = cword.l;
+		break;
+	}
+
+	/* re-enable interrupts if necessary */
+	if(flag)
+		enable_interrupts();
+
+	return flash_full_status_check(info, 0, info->write_tout, "write");
+}
+
+#ifdef CFG_FLASH_USE_BUFFER_WRITE
+
+/* loop through the sectors from the highest address
+ * when the passed address is greater or equal to the sector address
+ * we have a match
+ */
+static int find_sector(flash_info_t *info, ulong addr)
+{
+	int sector;
+	for(sector = info->sector_count - 1; sector >= 0; sector--) {
+		if(addr >= info->start[sector])
+			break;
+	}
+	return sector;
+}
+
+static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp, int len)
+{
+
+	int sector;
+	int cnt;
+	int retcode;
+	volatile cfiptr_t src;
+	volatile cfiptr_t dst;
+
+	src.cp = cp;
+	dst.cp = (uchar *)dest;
+	sector = find_sector(info, dest);
+	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
+	if((retcode = flash_status_check(info, sector, info->buffer_write_tout,
+					 "write to buffer")) == ERR_OK) {
+		switch(info->portwidth) {
+		case FLASH_CFI_8BIT:
+			cnt = len;
+			break;
+		case FLASH_CFI_16BIT:
+			cnt = len >> 1;
+			break;
+		case FLASH_CFI_32BIT:
+			cnt = len >> 2;
+			break;
+		default:
+			return ERR_INVAL;
+			break;
+		}
+		flash_write_cmd(info, sector, 0, (uchar)cnt-1);
+		while(cnt-- > 0) {
+			switch(info->portwidth) {
+			case FLASH_CFI_8BIT:
+				*dst.cp++ = *src.cp++;
+				break;
+			case FLASH_CFI_16BIT:
+				*dst.wp++ = *src.wp++;
+				break;
+			case FLASH_CFI_32BIT:
+				*dst.lp++ = *src.lp++;
+				break;
+			default:
+				return ERR_INVAL;
+				break;
+			}
+		}
+		flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_BUFFER_CONFIRM);
+		retcode = flash_full_status_check(info, sector, info->buffer_write_tout,
+					     "buffer write");
+	}
+	flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
+	return retcode;
+}
+#endif /* CFG_USE_FLASH_BUFFER_WRITE */
diff --git a/board/rpxsuper/rpxsuper.c b/board/rpxsuper/rpxsuper.c
new file mode 100644
index 00000000000..2c0717ed2e4
--- /dev/null
+++ b/board/rpxsuper/rpxsuper.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include "rpxsuper.h"
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+        /* PA31 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 *ATMTXEN */
+	/* PA30 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTCA   */
+	/* PA29 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTSOC  */
+	/* PA28 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 *ATMRXEN */
+	/* PA27 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRSOC */
+	/* PA26 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRCA */
+	/* PA25 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[0] */
+	/* PA24 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[1] */
+	/* PA23 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[2] */
+	/* PA22 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[3] */
+	/* PA21 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[4] */
+	/* PA20 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[5] */
+	/* PA19 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[6] */
+	/* PA18 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXD[7] */
+	/* PA17 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
+	/* PA16 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
+	/* PA15 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
+	/* PA14 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
+	/* PA13 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
+	/* PA12 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
+	/* PA11 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
+	/* PA10 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
+	/* PA9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC2 TXD */
+	/* PA8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC2 RXD */
+	/* PA7  */ {   1,   0,   0,   0,   0,   0   }, /* PA7 */
+	/* PA6  */ {   1,   0,   0,   0,   0,   0   }, /* PA6 */
+	/* PA5  */ {   1,   0,   0,   0,   0,   0   }, /* PA5 */
+	/* PA4  */ {   1,   0,   0,   0,   0,   0   }, /* PA4 */
+	/* PA3  */ {   1,   0,   0,   0,   0,   0   }, /* PA3 */
+	/* PA2  */ {   1,   0,   0,   0,   0,   0   }, /* PA2 */
+	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* PA1 */
+	/* PA0  */ {   1,   0,   0,   0,   0,   0   }  /* PA0 */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_DV */
+	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_ER */
+	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_ER */
+	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_EN */
+	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII COL */
+	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CRS */
+	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[3] */
+	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[2] */
+	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[1] */
+	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[0] */
+	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
+	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[1] */
+	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[2] */
+	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[3] */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   1,   0,   0,   1,   0,   0   }, /* PC31 */
+	/* PC30 */ {   1,   0,   0,   1,   0,   0   }, /* PC30 */
+	/* PC29 */ {   1,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
+	/* PC28 */ {   1,   0,   0,   1,   0,   0   }, /* PC28 */
+	/* PC27 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[0] */
+	/* PC26 */ {   1,   0,   0,   1,   0,   0   }, /* PC26 */
+	/* PC25 */ {   1,   0,   0,   1,   0,   0   }, /* PC25 */
+	/* PC24 */ {   1,   0,   0,   1,   0,   0   }, /* PC24 */
+	/* PC23 */ {   1,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
+	/* PC22 */ {   1,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
+	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
+	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
+	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_CLK */
+	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII TX_CLK */
+	/* PC15 */ {   1,   0,   0,   0,   0,   0   }, /* PC15 */
+	/* PC14 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
+	/* PC13 */ {   1,   0,   0,   1,   0,   0   }, /* PC13 */
+	/* PC12 */ {   1,   0,   0,   1,   0,   0   }, /* PC12 */
+	/* PC11 */ {   1,   0,   0,   1,   0,   0   }, /* PC11 */
+	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MDC */
+	/* PC9  */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MDIO */
+	/* PC8  */ {   1,   0,   0,   1,   0,   0   }, /* PC8 */
+	/* PC7  */ {   1,   0,   0,   1,   0,   0   }, /* PC7 */
+	/* PC6  */ {   1,   0,   0,   1,   0,   0   }, /* PC6 */
+	/* PC5  */ {   1,   0,   0,   1,   0,   0   }, /* PC5 */
+	/* PC4  */ {   1,   0,   0,   1,   0,   0   }, /* PC4 */
+	/* PC3  */ {   1,   0,   0,   1,   0,   0   }, /* PC3 */
+	/* PC2  */ {   1,   0,   0,   1,   0,   1   }, /* ENET FDE */
+	/* PC1  */ {   1,   0,   0,   1,   0,   0   }, /* ENET DSQE */
+	/* PC0  */ {   1,   0,   0,   1,   0,   0   }, /* ENET LBK */
+    },
+
+    /* Port D */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   0,   0,   0,   0,   0   }, /* SCC1 EN RxD */
+	/* PD30 */ {   1,   0,   0,   0,   0,   0   }, /* SCC1 EN TxD */
+	/* PD29 */ {   1,   0,   0,   0,   0,   0   }, /* SCC1 EN TENA */
+	/* PD28 */ {   1,   0,   0,   0,   0,   0   }, /* PD28 */
+	/* PD27 */ {   1,   0,   0,   0,   0,   0   }, /* PD27 */
+	/* PD26 */ {   1,   0,   0,   0,   0,   0   }, /* PD26 */
+	/* PD25 */ {   1,   0,   0,   0,   0,   0   }, /* PD25 */
+	/* PD24 */ {   1,   0,   0,   0,   0,   0   }, /* PD24 */
+	/* PD23 */ {   1,   0,   0,   0,   0,   0   }, /* PD23 */
+	/* PD22 */ {   1,   0,   0,   0,   0,   0   }, /* PD22 */
+	/* PD21 */ {   1,   0,   0,   0,   0,   0   }, /* PD21 */
+	/* PD20 */ {   1,   0,   0,   0,   0,   0   }, /* PD20 */
+	/* PD19 */ {   1,   0,   0,   0,   0,   0   }, /* PD19 */
+	/* PD18 */ {   1,   0,   0,   0,   0,   0   }, /* PD19 */
+	/* PD17 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
+	/* PD16 */ {   1,   0,   0,   0,   0,   0   }, /* FCC1 ATMTXPRTY */
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+	/* PD13 */ {   1,   0,   0,   0,   0,   0   }, /* PD13 */
+	/* PD12 */ {   1,   0,   0,   0,   0,   0   }, /* PD12 */
+	/* PD11 */ {   1,   0,   0,   0,   0,   0   }, /* PD11 */
+	/* PD10 */ {   1,   0,   0,   0,   0,   0   }, /* PD10 */
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   1,   0,   0,   0,   0,   0   }, /* PD7 */
+	/* PD6  */ {   1,   0,   0,   0,   0,   0   }, /* PD6 */
+	/* PD5  */ {   1,   0,   0,   0,   0,   0   }, /* PD5 */
+	/* PD4  */ {   1,   0,   0,   0,   0,   0   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Setup CS4 to enable the Board Control/Status registers.
+ * Otherwise the smcs won't work.
+*/
+int board_pre_init (void)
+{
+    volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8260_t *memctl = &immap->im_memctl;
+    memctl->memc_br4 = CFG_BR4_PRELIM;
+    memctl->memc_or4 = CFG_OR4_PRELIM;
+    regs->bcsr1 = 0x70; /* to enable terminal no SMC1 */
+    regs->bcsr2 = 0x20;	/* mut be written to enable writing FLASH */
+    return 0;
+}
+
+void
+reset_phy(void)
+{
+    volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    regs->bcsr4 = 0xC3;
+}
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard(void)
+{
+    volatile t_rpx_regs *regs = (t_rpx_regs*)CFG_REGS_BASE;
+    printf ("Board: Embedded Planet RPX Super, Revision %d\n",
+	regs->bcsr0 >> 4);
+
+    return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8260_t *memctl = &immap->im_memctl;
+    volatile uchar c = 0, *ramaddr;
+    ulong psdmr, lsdmr, bcr;
+    long size = 0;
+    int i;
+
+    psdmr = CFG_PSDMR;
+    lsdmr = CFG_LSDMR;
+
+    /*
+     * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+     *
+     * "At system reset, initialization software must set up the
+     *  programmable parameters in the memory controller banks registers
+     *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+     *  system software should execute the following initialization sequence
+     *  for each SDRAM device.
+     *
+     *  1. Issue a PRECHARGE-ALL-BANKS command
+     *  2. Issue eight CBR REFRESH commands
+     *  3. Issue a MODE-SET command to initialize the mode register
+     *
+     *  The initial commands are executed by setting P/LSDMR[OP] and
+     *  accessing the SDRAM with a single-byte transaction."
+     *
+     * The appropriate BRx/ORx registers have already been set when we
+     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     */
+
+    size = CFG_SDRAM0_SIZE;
+    bcr = immap->im_siu_conf.sc_bcr;
+    immap->im_siu_conf.sc_bcr = (bcr & ~BCR_EBM);
+
+    memctl->memc_mptpr = CFG_MPTPR;
+
+    ramaddr = (uchar *)(CFG_SDRAM0_BASE);
+    memctl->memc_psrt = CFG_PSRT;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+    *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+    for (i = 0; i < 8; i++)
+        *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+    *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+    *ramaddr = c;
+
+    immap->im_siu_conf.sc_bcr = bcr;
+
+#ifndef CFG_RAMBOOT
+/*    size += CFG_SDRAM1_SIZE; */
+    ramaddr = (uchar *)(CFG_SDRAM1_BASE);
+    memctl->memc_lsrt = CFG_LSRT;
+
+    memctl->memc_lsdmr = lsdmr | PSDMR_OP_PREA;
+    *ramaddr = c;
+
+    memctl->memc_lsdmr = lsdmr | PSDMR_OP_CBRR;
+    for (i = 0; i < 8; i++)
+	*ramaddr = c;
+
+    memctl->memc_lsdmr = lsdmr | PSDMR_OP_MRW;
+    *ramaddr = c;
+
+    memctl->memc_lsdmr = lsdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+    *ramaddr = c;
+#endif
+
+    /* return total ram size */
+    return (size * 1024 * 1024);
+}
diff --git a/board/rsdproto/config.mk b/board/rsdproto/config.mk
new file mode 100644
index 00000000000..5844ec1ea4c
--- /dev/null
+++ b/board/rsdproto/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MBX8xx boards
+#
+
+TEXT_BASE = 0xff000000
+/*TEXT_BASE  = 0x00200000 */
diff --git a/board/rsdproto/rsdproto.c b/board/rsdproto/rsdproto.c
new file mode 100644
index 00000000000..bf4fd5305f9
--- /dev/null
+++ b/board/rsdproto/rsdproto.c
@@ -0,0 +1,378 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include <i2c.h>
+
+/* define to initialise the SDRAM on the local bus */
+#undef INIT_LOCAL_BUS_SDRAM
+
+/* I2C Bus adresses for PPC & Protocol board */
+#define PPC8260_I2C_ADR		0x30	/*(0)011.0000 */
+#define LM84_PPC_I2C_ADR	0x2A	/*(0)010.1010 */
+#define LM84_SHARC_I2C_ADR	0x29	/*(0)010.1001 */
+#define VIRTEX_I2C_ADR		0x25	/*(0)010.0101 */
+#define X24645_PPC_I2C_ADR	0x00	/*(0)00X.XXXX  -> be careful ! No other i2c-chip should have an adress beginning with (0)00 !!! */
+#define RS5C372_PPC_I2C_ADR	0x32	/*(0)011.0010  -> this adress is programmed by the manufacturer and cannot be changed !!! */
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PA31 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA30 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA29 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA28 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA27 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA26 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA25 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA24 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA23 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA22 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA21 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA20 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA19 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA18 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA17 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA16 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA15 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA14 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA13 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA12 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA11 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA10 */ {   0,   0,   0,   0,   0,   0   },
+	/* PA9  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA8  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA7  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA6  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA5  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA4  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA3  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA2  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA1  */ {   0,   0,   0,   0,   0,   0   },
+	/* PA0  */ {   0,   0,   0,   0,   0,   0   }
+    },
+
+
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB16 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB15 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB14 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB13 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB12 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB11 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB10 */ {   0,   0,   0,   0,   0,   0   },
+	/* PB9  */ {   0,   0,   0,   0,   0,   0   },
+	/* PB8  */ {   0,   0,   0,   0,   0,   0   },
+	/* PB7  */ {   0,   0,   0,   0,   0,   0   },
+	/* PB6  */ {   0,   0,   0,   0,   0,   0   },
+	/* PB5  */ {   0,   0,   0,   0,   0,   0   },
+	/* PB4  */ {   0,   0,   0,   0,   0,   0   },
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC30 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC29 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC28 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC27 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC26 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC25 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC24 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC23 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC22 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC21 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC20 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   },
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* ETHRXCLK: CLK14 */
+	/* PC17 */ {   0,   0,   0,   0,   0,   0   }, /* ETHTXCLK: CLK15 */
+	/* PC16 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC15 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC14 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 UART CD/ */
+	/* PC13 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC12 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC11 */ {   0,   0,   0,   0,   0,   0   },
+	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* ETHMDC: GP */
+	/* PC9  */ {   1,   0,   0,   1,   0,   0   }, /* ETHMDIO: GP */
+	/* PC8  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC7  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC6  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC5  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC4  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC3  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC2  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC1  */ {   0,   0,   0,   0,   0,   0   },
+	/* PC0  */ {   0,   0,   0,   0,   0,   0   }
+    },
+
+
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 UART RxD */
+	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 UART TxD */
+	/* PD29 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD28 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD27 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD26 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD25 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD24 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD23 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD22 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD21 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD20 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD19 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD18 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD17 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD16 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+	/* PD13 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD12 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD11 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD10 */ {   0,   0,   0,   0,   0,   0   },
+	/* PD9  */ {   0,   0,   0,   0,   0,   0   },
+	/* PD8  */ {   0,   0,   0,   0,   0,   0   },
+	/* PD7  */ {   0,   0,   0,   0,   0,   0   },
+	/* PD6  */ {   0,   0,   0,   0,   0,   0   },
+	/* PD5  */ {   0,   0,   0,   0,   0,   0   },
+	/* PD4  */ {   0,   0,   0,   0,   0,   0   },
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+struct tm {
+	unsigned int tm_sec;
+	unsigned int tm_min;
+	unsigned int tm_hour;
+	unsigned int tm_wday;
+	unsigned int tm_mday;
+	unsigned int tm_mon;
+	unsigned int tm_year;
+};
+
+void read_RS5C372_time (struct tm *timedate)
+{
+	unsigned char buffer[8];
+
+#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
+
+	if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
+		timedate->tm_sec = BCD_TO_BIN (buffer[0]);
+		timedate->tm_min = BCD_TO_BIN (buffer[1]);
+		timedate->tm_hour = BCD_TO_BIN (buffer[2]);
+		timedate->tm_wday = BCD_TO_BIN (buffer[3]);
+		timedate->tm_mday = BCD_TO_BIN (buffer[4]);
+		timedate->tm_mon = BCD_TO_BIN (buffer[5]);
+		timedate->tm_year = BCD_TO_BIN (buffer[6]) + 2000;
+	} else {
+		/*printf("i2c error %02x\n", rc); */
+		memset (timedate, 0, sizeof (struct tm));
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+int read_LM84_temp (int address)
+{
+	unsigned char buffer[8];
+	/*int rc;*/
+
+	if (i2c_read (address, 0, 1, buffer, 1)) {
+		return (int) buffer[0];
+	} else {
+		/*printf("i2c error %02x\n", rc); */
+		return -42;
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	struct tm timedate;
+	unsigned int ppctemp, prottemp;
+
+	puts ("Board: Rohde & Schwarz 8260 Protocol Board\n");
+
+	/* initialise i2c */
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	read_RS5C372_time (&timedate);
+	printf ("  Time:  %02d:%02d:%02d\n",
+			timedate.tm_hour, timedate.tm_min, timedate.tm_sec);
+	printf ("  Date:  %02d-%02d-%04d\n",
+			timedate.tm_mday, timedate.tm_mon, timedate.tm_year);
+	ppctemp = read_LM84_temp (LM84_PPC_I2C_ADR);
+	prottemp = read_LM84_temp (LM84_SHARC_I2C_ADR);
+	printf ("  Temp:  PPC %d C, Protocol Board %d C\n",
+			ppctemp, prottemp);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Miscelaneous platform dependent initialisations while still
+ * running in flash
+ */
+
+int misc_init_f (void)
+{
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+
+#ifdef INIT_LOCAL_BUS_SDRAM
+	volatile uchar *ramaddr8;
+#endif
+	volatile ulong *ramaddr32;
+	ulong sdmr;
+	int i;
+
+	/*
+	 * Only initialize SDRAM when running from FLASH.
+	 * When running from RAM, don't touch it.
+	 */
+	if ((ulong) initdram & 0xff000000) {
+		immap->im_siu_conf.sc_ppc_acr = 0x02;
+		immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
+		immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;
+		immap->im_siu_conf.sc_lcl_acr = 0x02;
+		immap->im_siu_conf.sc_lcl_alrh = 0x01234567;
+		immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;
+		/*
+		 * Program local/60x bus Transfer Error Status and Control Regs:
+		 * Disable parity errors
+		 */
+		immap->im_siu_conf.sc_tescr1 = 0x00040000;
+		immap->im_siu_conf.sc_ltescr1 = 0x00040000;
+
+		/*
+		 * Perform Power-Up Initialisation of SDRAM (see 8260 UM, 10.4.2)
+		 *
+		 * The appropriate BRx/ORx registers have already
+		 * been set when we get here (see cpu_init_f). The
+		 * SDRAM can be accessed at the address CFG_SDRAM_BASE.
+		 */
+		memctl->memc_mptpr = 0x2000;
+		memctl->memc_mar = 0x0200;
+#ifdef INIT_LOCAL_BUS_SDRAM
+		/* initialise local bus ram
+		 *
+		 * (using the PSRMR_ definitions is NOT an error here
+		 * - the LSDMR has the same fields as the PSDMR!)
+		 */
+		memctl->memc_lsrt = 0x0b;
+		memctl->memc_lurt = 0x00;
+		ramaddr = (uchar *) PHYS_SDRAM_LOCAL;
+		sdmr = CFG_LSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
+		memctl->memc_lsdmr = sdmr | PSDMR_OP_PREA;
+		*ramaddr = 0xff;
+		for (i = 0; i < 8; i++) {
+			memctl->memc_lsdmr = sdmr | PSDMR_OP_CBRR;
+			*ramaddr = 0xff;
+		}
+		memctl->memc_lsdmr = sdmr | PSDMR_OP_MRW;
+		*ramaddr = 0xff;
+		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_NORM;
+#endif
+		/* initialise 60x bus ram */
+		memctl->memc_psrt = 0x0b;
+		memctl->memc_purt = 0x08;
+		ramaddr32 = (ulong *) PHYS_SDRAM_60X;
+		sdmr = CFG_PSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);
+		memctl->memc_psdmr = sdmr | PSDMR_OP_PREA;
+		ramaddr32[0] = 0x00ff00ff;
+		ramaddr32[1] = 0x00ff00ff;
+		memctl->memc_psdmr = sdmr | PSDMR_OP_CBRR;
+		for (i = 0; i < 8; i++) {
+			ramaddr32[0] = 0x00ff00ff;
+			ramaddr32[1] = 0x00ff00ff;
+		}
+		memctl->memc_psdmr = sdmr | PSDMR_OP_MRW;
+		ramaddr32[0] = 0x00ff00ff;
+		ramaddr32[1] = 0x00ff00ff;
+		memctl->memc_psdmr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	}
+
+	/* return the size of the 60x bus ram */
+	return PHYS_SDRAM_60X_SIZE;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Miscelaneous platform dependent initialisations after monitor
+ * has been relocated into ram
+ */
+
+int misc_init_r (void)
+{
+	printf ("misc_init_r\n");
+	return (0);
+}
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
new file mode 100644
index 00000000000..0f0f0e6cc03
--- /dev/null
+++ b/board/sacsng/sacsng.c
@@ -0,0 +1,801 @@
+/*
+ * (C) Copyright 2002
+ * Custom IDEAS, Inc. <www.cideas.com>
+ * Gerald Van Baren <vanbaren@cideas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/u-boot.h>
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+/*NO// #include <memtest.h> */
+#include <i2c.h>
+#include <spi.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+#include <status_led.h>
+#endif
+
+#include "clkinit.h"
+#include "ioconfig.h" /* I/O configuration table */
+
+/*
+ * PBI Page Based Interleaving
+ *   PSDMR_PBI page based interleaving
+ *   0         bank based interleaving
+ * External Address Multiplexing (EAMUX) adds a clock to address cycles
+ *   (this can help with marginal board layouts)
+ *   PSDMR_EAMUX  adds a clock
+ *   0            no extra clock
+ * Buffer Command (BUFCMD) adds a clock to command cycles.
+ *   PSDMR_BUFCMD adds a clock
+ *   0            no extra clock
+ */
+#define CONFIG_PBI		PSDMR_PBI
+#define PESSIMISTIC_SDRAM	0
+#define EAMUX			0	/* EST requires EAMUX */
+#define BUFCMD			0
+
+/*
+ * ADC/DAC Defines:
+ */
+#define INITIAL_SAMPLE_RATE 10016     /* Initial Daq sample rate */
+#define INITIAL_RIGHT_JUST  0         /* Initial DAC right justification */
+#define INITIAL_MCLK_DIVIDE 0         /* Initial MCLK Divide */
+#define INITIAL_SAMPLE_64X  1         /* Initial  64x clocking mode */
+#define INITIAL_SAMPLE_128X 0         /* Initial 128x clocking mode */
+
+/*
+ * ADC Defines:
+ */
+#define I2C_ADC_1_ADDR 0x0E           /* I2C Address of the ADC #1 */
+#define I2C_ADC_2_ADDR 0x0F           /* I2C Address of the ADC #2 */
+
+#define ADC_SDATA1_MASK 0x00020000    /* PA14 - CH12SDATA_PU   */
+#define ADC_SDATA2_MASK 0x00010000    /* PA15 - CH34SDATA_PU   */
+
+#define ADC_VREF_CAP   100            /* VREF capacitor in uF */
+#define ADC_INITIAL_DELAY (10 * ADC_VREF_CAP) /* 10 usec per uF, in usec */
+#define ADC_SDATA_DELAY    100        /* ADC SDATA release delay in usec */
+#define ADC_CAL_DELAY (1000000 / INITIAL_SAMPLE_RATE * 4500)
+                                      /* Wait at least 4100 LRCLK's */
+
+#define ADC_REG1_FRAME_START    0x80  /* Frame start */
+#define ADC_REG1_GROUND_CAL     0x40  /* Ground calibration enable */
+#define ADC_REG1_ANA_MOD_PDOWN  0x20  /* Analog modulator section in power down */
+#define ADC_REG1_DIG_MOD_PDOWN  0x10  /* Digital modulator section in power down */
+
+#define ADC_REG2_128x           0x80  /* Oversample at 128x */
+#define ADC_REG2_CAL            0x40  /* System calibration enable */
+#define ADC_REG2_CHANGE_SIGN    0x20  /* Change sign enable */
+#define ADC_REG2_LR_DISABLE     0x10  /* Left/Right output disable */
+#define ADC_REG2_HIGH_PASS_DIS  0x08  /* High pass filter disable */
+#define ADC_REG2_SLAVE_MODE     0x04  /* Slave mode */
+#define ADC_REG2_DFS            0x02  /* Digital format select */
+#define ADC_REG2_MUTE           0x01  /* Mute */
+
+#define ADC_REG7_ADDR_ENABLE    0x80  /* Address enable */
+#define ADC_REG7_PEAK_ENABLE    0x40  /* Peak enable */
+#define ADC_REG7_PEAK_UPDATE    0x20  /* Peak update */
+#define ADC_REG7_PEAK_FORMAT    0x10  /* Peak display format */
+#define ADC_REG7_DIG_FILT_PDOWN 0x04  /* Digital filter power down enable */
+#define ADC_REG7_FIR2_IN_EN     0x02  /* External FIR2 input enable */
+#define ADC_REG7_PSYCHO_EN      0x01  /* External pyscho filter input enable */
+
+/*
+ * DAC Defines:
+ */
+
+#define I2C_DAC_ADDR 0x11             /* I2C Address of the DAC */
+
+#define DAC_RST_MASK 0x00008000       /* PA16 - DAC_RST*  */
+#define DAC_RESET_DELAY    100        /* DAC reset delay in usec */
+#define DAC_INITIAL_DELAY 5000        /* DAC initialization delay in usec */
+
+#define DAC_REG1_AMUTE   0x80         /* Auto-mute */
+
+#define DAC_REG1_LEFT_JUST_24_BIT (0 << 4) /* Fmt 0: Left justified 24 bit  */
+#define DAC_REG1_I2S_24_BIT       (1 << 4) /* Fmt 1: I2S up to 24 bit       */
+#define DAC_REG1_RIGHT_JUST_16BIT (2 << 4) /* Fmt 2: Right justified 16 bit */
+#define DAC_REG1_RIGHT_JUST_24BIT (3 << 4) /* Fmt 3: Right justified 24 bit */
+#define DAC_REG1_RIGHT_JUST_20BIT (4 << 4) /* Fmt 4: Right justified 20 bit */
+#define DAC_REG1_RIGHT_JUST_18BIT (5 << 4) /* Fmt 5: Right justified 18 bit */
+
+#define DAC_REG1_DEM_NO           (0 << 2) /* No      De-emphasis  */
+#define DAC_REG1_DEM_44KHZ        (1 << 2) /* 44.1KHz De-emphasis  */
+#define DAC_REG1_DEM_48KHZ        (2 << 2) /* 48KHz   De-emphasis  */
+#define DAC_REG1_DEM_32KHZ        (3 << 2) /* 32KHz   De-emphasis  */
+
+#define DAC_REG1_SINGLE 0             /*   4- 50KHz sample rate  */
+#define DAC_REG1_DOUBLE 1             /*  50-100KHz sample rate  */
+#define DAC_REG1_QUAD   2             /* 100-200KHz sample rate  */
+#define DAC_REG1_DSD    3             /* Direct Stream Data, DSD */
+
+#define DAC_REG5_INVERT_A   0x80      /* Invert channel A */
+#define DAC_REG5_INVERT_B   0x40      /* Invert channel B */
+#define DAC_REG5_I2C_MODE   0x20      /* Control port (I2C) mode */
+#define DAC_REG5_POWER_DOWN 0x10      /* Power down mode */
+#define DAC_REG5_MUTEC_A_B  0x08      /* Mutec A=B */
+#define DAC_REG5_FREEZE     0x04      /* Freeze */
+#define DAC_REG5_MCLK_DIV   0x02      /* MCLK divide by 2 */
+#define DAC_REG5_RESERVED   0x01      /* Reserved */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard(void)
+{
+    printf ("SACSng\n");
+
+    return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+    volatile immap_t *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8260_t *memctl = &immap->im_memctl;
+    volatile uchar c = 0;
+    volatile uchar *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
+    uint  psdmr = CFG_PSDMR;
+    int   i;
+    uint   psrt = 14;					/* for no SPD */
+    uint   chipselects = 1;				/* for no SPD */
+    uint   sdram_size = CFG_SDRAM0_SIZE * 1024 * 1024;	/* for no SPD */
+    uint   or = CFG_OR2_PRELIM;				/* for no SPD */
+#ifdef SDRAM_SPD_ADDR
+    uint   data_width;
+    uint   rows;
+    uint   banks;
+    uint   cols;
+    uint   caslatency;
+    uint   width;
+    uint   rowst;
+    uint   sdam;
+    uint   bsma;
+    uint   sda10;
+    u_char spd_size;
+    u_char data;
+    u_char cksum;
+    int    j;
+#endif
+
+#ifdef SDRAM_SPD_ADDR
+    /* Keep the compiler from complaining about potentially uninitialized vars */
+    data_width = chipselects = rows = banks = cols = caslatency = psrt = 0;
+
+    /*
+     * Read the SDRAM SPD EEPROM via I2C.
+     */
+    i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1);
+    spd_size = data;
+    cksum    = data;
+    for(j = 1; j < 64; j++) {	/* read only the checksummed bytes */
+	/* note: the I2C address autoincrements when alen == 0 */
+	i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1);
+	     if(j ==  5) chipselects = data & 0x0F;
+	else if(j ==  6) data_width  = data;
+	else if(j ==  7) data_width |= data << 8;
+	else if(j ==  3) rows        = data & 0x0F;
+	else if(j ==  4) cols        = data & 0x0F;
+	else if(j == 12) {
+	    /*
+             * Refresh rate: this assumes the prescaler is set to
+	     * approximately 1uSec per tick.
+	     */
+	    switch(data & 0x7F) {
+                default:
+                case 0:  psrt =  14 ; /*  15.625uS */  break;
+                case 1:  psrt =   2;  /*   3.9uS   */  break;
+                case 2:  psrt =   6;  /*   7.8uS   */  break;
+                case 3:  psrt =  29;  /*  31.3uS   */  break;
+                case 4:  psrt =  60;  /*  62.5uS   */  break;
+                case 5:  psrt = 120;  /* 125uS     */  break;
+	    }
+	}
+	else if(j == 17) banks       = data;
+	else if(j == 18) {
+	    caslatency = 3; /* default CL */
+#if(PESSIMISTIC_SDRAM)
+		 if((data & 0x04) != 0) caslatency = 3;
+	    else if((data & 0x02) != 0) caslatency = 2;
+	    else if((data & 0x01) != 0) caslatency = 1;
+#else
+		 if((data & 0x01) != 0) caslatency = 1;
+	    else if((data & 0x02) != 0) caslatency = 2;
+	    else if((data & 0x04) != 0) caslatency = 3;
+#endif
+	    else {
+		printf ("WARNING: Unknown CAS latency 0x%02X, using 3\n",
+		        data);
+	    }
+	}
+	else if(j == 63) {
+	    if(data != cksum) {
+		printf ("WARNING: Configuration data checksum failure:"
+		        " is 0x%02x, calculated 0x%02x\n",
+			data, cksum);
+	    }
+	}
+	cksum += data;
+    }
+
+    /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */
+    if(caslatency < 2) {
+	printf("CL was %d, forcing to 2\n", caslatency);
+	caslatency = 2;
+    }
+    if(rows > 14) {
+	printf("This doesn't look good, rows = %d, should be <= 14\n", rows);
+	rows = 14;
+    }
+    if(cols > 11) {
+	printf("This doesn't look good, columns = %d, should be <= 11\n", cols);
+	cols = 11;
+    }
+
+    if((data_width != 64) && (data_width != 72))
+    {
+	printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n",
+	    data_width);
+    }
+    width = 3;		/* 2^3 = 8 bytes = 64 bits wide */
+    /*
+     * Convert banks into log2(banks)
+     */
+    if     (banks == 2)	banks = 1;
+    else if(banks == 4)	banks = 2;
+    else if(banks == 8)	banks = 3;
+
+    sdram_size = 1 << (rows + cols + banks + width);
+
+#if(CONFIG_PBI == 0)	/* bank-based interleaving */
+    rowst = ((32 - 6) - (rows + cols + width)) * 2;
+#else
+    rowst = 32 - (rows + banks + cols + width);
+#endif
+
+    or = ~(sdram_size - 1)    |	/* SDAM address mask	*/
+	  ((banks-1) << 13)   |	/* banks per device	*/
+	  (rowst << 9)        |	/* rowst		*/
+	  ((rows - 9) << 6);	/* numr			*/
+
+    memctl->memc_or2 = or;
+
+    /*
+     * SDAM specifies the number of columns that are multiplexed
+     * (reference AN2165/D), defined to be (columns - 6) for page
+     * interleave, (columns - 8) for bank interleave.
+     *
+     * BSMA is 14 - max(rows, cols).  The bank select lines come
+     * into play above the highest "address" line going into the
+     * the SDRAM.
+     */
+#if(CONFIG_PBI == 0)	/* bank-based interleaving */
+    sdam = cols - 8;
+    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+    sda10 = sdam + 2;
+#else
+    sdam = cols - 6;
+    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
+    sda10 = sdam;
+#endif
+#if(PESSIMISTIC_SDRAM)
+    psdmr = (CONFIG_PBI              |\
+	     PSDMR_RFEN              |\
+	     PSDMR_RFRC_16_CLK       |\
+	     PSDMR_PRETOACT_8W       |\
+	     PSDMR_ACTTORW_8W        |\
+	     PSDMR_WRC_4C            |\
+	     PSDMR_EAMUX             |\
+             PSDMR_BUFCMD)           |\
+	     caslatency              |\
+	     ((caslatency - 1) << 6) |	/* LDOTOPRE is CL - 1 */ \
+	     (sdam << 24)            |\
+	     (bsma << 21)            |\
+	     (sda10 << 18);
+#else
+    psdmr = (CONFIG_PBI              |\
+	     PSDMR_RFEN              |\
+	     PSDMR_RFRC_7_CLK        |\
+	     PSDMR_PRETOACT_3W       |	/* 1 for 7E parts (fast PC-133) */ \
+	     PSDMR_ACTTORW_2W        |	/* 1 for 7E parts (fast PC-133) */ \
+	     PSDMR_WRC_1C            |	/* 1 clock + 7nSec */
+	     EAMUX                   |\
+             BUFCMD)                 |\
+	     caslatency              |\
+	     ((caslatency - 1) << 6) |	/* LDOTOPRE is CL - 1 */ \
+	     (sdam << 24)            |\
+	     (bsma << 21)            |\
+	     (sda10 << 18);
+#endif
+#endif
+
+    /*
+     * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+     *
+     * "At system reset, initialization software must set up the
+     *  programmable parameters in the memory controller banks registers
+     *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+     *  system software should execute the following initialization sequence
+     *  for each SDRAM device.
+     *
+     *  1. Issue a PRECHARGE-ALL-BANKS command
+     *  2. Issue eight CBR REFRESH commands
+     *  3. Issue a MODE-SET command to initialize the mode register
+     *
+     * Quote from Micron MT48LC8M16A2 data sheet:
+     *
+     *  "...the SDRAM requires a 100uS delay prior to issuing any
+     *  command other than a COMMAND INHIBIT or NOP.  Starting at some
+     *  point during this 100uS period and continuing at least through
+     *  the end of this period, COMMAND INHIBIT or NOP commands should
+     *  be applied."
+     *
+     *  "Once the 100uS delay has been satisfied with at least one COMMAND
+     *  INHIBIT or NOP command having been applied, a /PRECHARGE command/
+     *  should be applied.  All banks must then be precharged, thereby
+     *  placing the device in the all banks idle state."
+     *
+     *  "Once in the idle state, /two/ AUTO REFRESH cycles must be
+     *  performed.  After the AUTO REFRESH cycles are complete, the
+     *  SDRAM is ready for mode register programming."
+     *
+     *  (/emphasis/ mine, gvb)
+     *
+     *  The way I interpret this, Micron start up sequence is:
+     *  1. Issue a PRECHARGE-BANK command (initial precharge)
+     *  2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged")
+     *  3. Issue two (presumably, doing eight is OK) CBR REFRESH commands
+     *  4. Issue a MODE-SET command to initialize the mode register
+     *
+     *  --------
+     *
+     *  The initial commands are executed by setting P/LSDMR[OP] and
+     *  accessing the SDRAM with a single-byte transaction."
+     *
+     * The appropriate BRx/ORx registers have already been set when we
+     * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+     */
+
+    memctl->memc_mptpr = CFG_MPTPR;
+    memctl->memc_psrt  = psrt;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+    *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+    for (i = 0; i < 8; i++)
+	*ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+    *ramaddr = c;
+
+    memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+    *ramaddr = c;
+
+    /*
+     * Do it a second time for the second set of chips if the DIMM has
+     * two chip selects (double sided).
+     */
+    if(chipselects > 1) {
+        ramaddr += sdram_size;
+
+	memctl->memc_br3 = CFG_BR3_PRELIM + sdram_size;
+	memctl->memc_or3 = or;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+	    *ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr = c;
+    }
+
+    /* return total ram size */
+    return (sdram_size * chipselects);
+}
+
+/*-----------------------------------------------------------------------
+ * Board Control Functions
+ */
+void board_poweroff (void)
+{
+    while (1);		/* hang forever */
+}
+
+
+#ifdef CONFIG_MISC_INIT_R
+/* ------------------------------------------------------------------------- */
+int misc_init_r(void)
+{
+    /*
+     * Note: iop is used by the I2C macros, and iopa by the ADC/DAC initialization.
+     */
+    volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
+    volatile ioport_t *iop  = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT);
+
+    int  reg;          /* I2C register value */
+    char *ep;          /* Environment pointer */
+    char str_buf[12] ; /* sprintf output buffer */
+    int  sample_rate;  /* ADC/DAC sample rate */
+    int  sample_64x;   /* Use  64/4 clocking for the ADC/DAC */
+    int  sample_128x;  /* Use 128/4 clocking for the ADC/DAC */
+    int  right_just;   /* Is the data to the DAC right justified? */
+    int  mclk_divide;  /* MCLK Divide */
+
+    /*
+     * SACSng custom initialization:
+     *    Start the ADC and DAC clocks, since the Crystal parts do not
+     *    work on the I2C bus until the clocks are running.
+     */
+
+    sample_rate = INITIAL_SAMPLE_RATE;
+    if ((ep = getenv("DaqSampleRate")) != NULL) {
+        sample_rate = simple_strtol(ep, NULL, 10);
+    }
+
+    sample_64x  = INITIAL_SAMPLE_64X;
+    sample_128x = INITIAL_SAMPLE_128X;
+    if ((ep = getenv("Daq64xSampling")) != NULL) {
+        sample_64x = simple_strtol(ep, NULL, 10);
+	if (sample_64x) {
+	    sample_128x = 0;
+	}
+	else {
+	    sample_128x = 1;
+	}
+    }
+    else {
+        if ((ep = getenv("Daq128xSampling")) != NULL) {
+	    sample_128x = simple_strtol(ep, NULL, 10);
+	    if (sample_128x) {
+	        sample_64x = 0;
+	    }
+	    else {
+	        sample_64x = 1;
+	    }
+	}
+    }
+
+    Daq_Init_Clocks(sample_rate, sample_64x);
+    sample_rate = Daq_Get_SampleRate();
+    Daq_Start_Clocks(sample_rate);
+
+    sprintf(str_buf, "%d", sample_rate);
+    setenv("DaqSampleRate", str_buf);
+
+    if (sample_64x) {
+        setenv("Daq64xSampling",  "1");
+        setenv("Daq128xSampling", NULL);
+    }
+    else {
+        setenv("Daq64xSampling",  NULL);
+        setenv("Daq128xSampling", "1");
+    }
+
+    /* Display the ADC/DAC clocking information */
+    Daq_Display_Clocks();
+
+    /*
+     * Determine the DAC data justification
+     */
+
+    right_just = INITIAL_RIGHT_JUST;
+    if ((ep = getenv("DaqDACRightJustified")) != NULL) {
+        right_just = simple_strtol(ep, NULL, 10);
+    }
+
+    sprintf(str_buf, "%d", right_just);
+    setenv("DaqDACRightJustified", str_buf);
+
+    /*
+     * Determine the DAC MCLK Divide
+     */
+
+    mclk_divide = INITIAL_MCLK_DIVIDE;
+    if ((ep = getenv("DaqDACMClockDivide")) != NULL) {
+        mclk_divide = simple_strtol(ep, NULL, 10);
+    }
+
+    sprintf(str_buf, "%d", mclk_divide);
+    setenv("DaqDACMClockDivide", str_buf);
+
+    /*
+     * Initializing the I2C address in the Crystal A/Ds:
+     *
+     * 1) Wait for VREF cap to settle (10uSec per uF)
+     * 2) Release pullup on SDATA
+     * 3) Write the I2C address to register 6
+     * 4) Enable address matching by setting the MSB in register 7
+     */
+
+    printf("Initializing the ADC...\n");
+    udelay(ADC_INITIAL_DELAY);		/* 10uSec per uF of VREF cap */
+
+    iopa->pdat &= ~ADC_SDATA1_MASK;     /* release SDATA1 */
+    udelay(ADC_SDATA_DELAY);		/* arbitrary settling time */
+
+    i2c_reg_write(0x00, 0x06, I2C_ADC_1_ADDR);	/* set address */
+    i2c_reg_write(I2C_ADC_1_ADDR, 0x07,         /* turn on ADDREN */
+		  ADC_REG7_ADDR_ENABLE);
+
+    i2c_reg_write(I2C_ADC_1_ADDR, 0x02, /* 128x, slave mode, !HPEN */
+		  (sample_64x ? 0 : ADC_REG2_128x) |
+		  ADC_REG2_HIGH_PASS_DIS |
+		  ADC_REG2_SLAVE_MODE);
+
+    reg = i2c_reg_read(I2C_ADC_1_ADDR, 0x06) & 0x7F;
+    if(reg != I2C_ADC_1_ADDR)
+	printf("Init of ADC U10 failed: address is 0x%02X should be 0x%02X\n",
+	       reg, I2C_ADC_1_ADDR);
+
+    iopa->pdat &= ~ADC_SDATA2_MASK;	/* release SDATA2 */
+    udelay(ADC_SDATA_DELAY);		/* arbitrary settling time */
+
+    i2c_reg_write(0x00, 0x06, I2C_ADC_2_ADDR);	/* set address (do not set ADDREN yet) */
+
+    i2c_reg_write(I2C_ADC_2_ADDR, 0x02, /* 64x, slave mode, !HPEN */
+		  (sample_64x ? 0 : ADC_REG2_128x) |
+		  ADC_REG2_HIGH_PASS_DIS |
+		  ADC_REG2_SLAVE_MODE);
+
+    reg = i2c_reg_read(I2C_ADC_2_ADDR, 0x06) & 0x7F;
+    if(reg != I2C_ADC_2_ADDR)
+	printf("Init of ADC U15 failed: address is 0x%02X should be 0x%02X\n",
+	       reg, I2C_ADC_2_ADDR);
+
+    i2c_reg_write(I2C_ADC_1_ADDR, 0x01, /* set FSTART and GNDCAL */
+		  ADC_REG1_FRAME_START |
+		  ADC_REG1_GROUND_CAL);
+
+    i2c_reg_write(I2C_ADC_1_ADDR, 0x02, /* Start calibration */
+		  (sample_64x ? 0 : ADC_REG2_128x) |
+		  ADC_REG2_CAL |
+		  ADC_REG2_HIGH_PASS_DIS |
+		  ADC_REG2_SLAVE_MODE);
+
+    udelay(ADC_CAL_DELAY);		/* a minimum of 4100 LRCLKs */
+    i2c_reg_write(I2C_ADC_1_ADDR, 0x01, 0x00);	/* remove GNDCAL */
+
+    /*
+     * Now that we have synchronized the ADC's, enable address
+     * selection on the second ADC as well as the first.
+     */
+    i2c_reg_write(I2C_ADC_2_ADDR, 0x07, ADC_REG7_ADDR_ENABLE);
+
+    /*
+     * Initialize the Crystal DAC
+     *
+     * Two of the config lines are used for I2C so we have to set them
+     * to the proper initialization state without inadvertantly
+     * sending an I2C "start" sequence.  When we bring the I2C back to
+     * the normal state, we send an I2C "stop" sequence.
+     */
+    printf("Initializing the DAC...\n");
+
+    /*
+     * Bring the I2C clock and data lines low for initialization
+     */
+    I2C_SCL(0);
+    I2C_DELAY;
+    I2C_SDA(0);
+    I2C_ACTIVE;
+    I2C_DELAY;
+
+    /* Reset the DAC */
+    iopa->pdat &= ~DAC_RST_MASK;
+    udelay(DAC_RESET_DELAY);
+
+    /* Release the DAC reset */
+    iopa->pdat |=  DAC_RST_MASK;
+    udelay(DAC_INITIAL_DELAY);
+
+    /*
+     * Cause the DAC to:
+     *     Enable control port (I2C mode)
+     *     Going into power down
+     */
+    i2c_reg_write(I2C_DAC_ADDR, 0x05,
+		  DAC_REG5_I2C_MODE |
+		  DAC_REG5_POWER_DOWN);
+
+    /*
+     * Cause the DAC to:
+     *     Enable control port (I2C mode)
+     *     Going into power down
+     *         . MCLK divide by 1
+     *         . MCLK divide by 2
+     */
+    i2c_reg_write(I2C_DAC_ADDR, 0x05,
+		  DAC_REG5_I2C_MODE |
+		  DAC_REG5_POWER_DOWN |
+		  (mclk_divide ? DAC_REG5_MCLK_DIV : 0));
+
+    /*
+     * Cause the DAC to:
+     *     Auto-mute disabled
+     *         . Format 0, left  justified 24 bits
+     *         . Format 3, right justified 24 bits
+     *     No de-emphasis
+     *         . Single speed mode
+     *         . Double speed mode
+     */
+    i2c_reg_write(I2C_DAC_ADDR, 0x01,
+		  (right_just ? DAC_REG1_RIGHT_JUST_24BIT :
+                                DAC_REG1_LEFT_JUST_24_BIT) |
+		  DAC_REG1_DEM_NO |
+		  (sample_rate >= 50000 ? DAC_REG1_DOUBLE : DAC_REG1_SINGLE));
+
+    sprintf(str_buf, "%d",
+	    sample_rate >= 50000 ? DAC_REG1_DOUBLE : DAC_REG1_SINGLE);
+    setenv("DaqDACFunctionalMode", str_buf);
+
+    /*
+     * Cause the DAC to:
+     *     Enable control port (I2C mode)
+     *     Remove power down
+     *         . MCLK divide by 1
+     *         . MCLK divide by 2
+     */
+    i2c_reg_write(I2C_DAC_ADDR, 0x05,
+		  DAC_REG5_I2C_MODE |
+		  (mclk_divide ? DAC_REG5_MCLK_DIV : 0));
+
+    /*
+     * Create a I2C stop condition:
+     *     low->high on data while clock is high.
+     */
+    I2C_SCL(1);
+    I2C_DELAY;
+    I2C_SDA(1);
+    I2C_DELAY;
+    I2C_TRISTATE;
+
+    printf("\n");
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+    /*
+     * Turn off the RED fail LED now that we are up and running.
+     */
+    status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
+#endif
+
+    return 0;
+}
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+/*
+ * Show boot status: flash the LED if something goes wrong, indicating
+ * that last thing that worked and thus, by implication, what is broken.
+ *
+ * This stores the last OK value in RAM so this will not work properly
+ * before RAM is initialized.  Since it is being used for indicating
+ * boot status (i.e. after RAM is initialized), that is OK.
+ */
+static void flash_code(uchar number, uchar modulo, uchar digits)
+{
+    int   j;
+
+    /*
+     * Recursively do upper digits.
+     */
+    if(digits > 1) {
+        flash_code(number / modulo, modulo, digits - 1);
+    }
+
+    number = number % modulo;
+
+    /*
+     * Zero is indicated by one long flash (dash).
+     */
+    if(number == 0) {
+        status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+        udelay(1000000);
+        status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+        udelay(200000);
+    } else {
+        /*
+         * Non-zero is indicated by short flashes, one per count.
+         */
+        for(j = 0; j < number; j++) {
+            status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+            udelay(100000);
+            status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
+            udelay(200000);
+        }
+    }
+    /*
+     * Inter-digit pause: we've already waited 200 mSec, wait 1 sec total
+     */
+    udelay(700000);
+}
+
+static int last_boot_progress;
+
+void show_boot_progress (int status)
+{
+    if(status != -1) {
+        last_boot_progress = status;
+    } else {
+        /*
+         * Houston, we have a problem.  Blink the last OK status which
+         * indicates where things failed.
+         */
+        status_led_set(STATUS_LED_RED, STATUS_LED_ON);
+        flash_code(last_boot_progress, 5, 3);
+        udelay(1000000);
+        status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
+    }
+}
+#endif /* CONFIG_SHOW_BOOT_PROGRESS */
+
+
+/*
+ * The following are used to control the SPI chip selects for the SPI command.
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_SPI)
+
+#define SPI_ADC_CS_MASK	0x00000800
+#define SPI_DAC_CS_MASK	0x00001000
+
+void spi_adc_chipsel(int cs)
+{
+    volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
+
+    if(cs)
+	iopd->pdat &= ~SPI_ADC_CS_MASK;	/* activate the chip select */
+    else
+	iopd->pdat |=  SPI_ADC_CS_MASK;	/* deactivate the chip select */
+}
+
+void spi_dac_chipsel(int cs)
+{
+    volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
+
+    if(cs)
+	iopd->pdat &= ~SPI_DAC_CS_MASK;	/* activate the chip select */
+    else
+	iopd->pdat |=  SPI_DAC_CS_MASK;	/* deactivate the chip select */
+}
+
+/*
+ * The SPI command uses this table of functions for controlling the SPI
+ * chip selects: it calls the appropriate function to control the SPI
+ * chip selects.
+ */
+spi_chipsel_type spi_chipsel[2] = {
+	spi_adc_chipsel,
+	spi_dac_chipsel
+};
+#endif /* CFG_CMD_SPI */
+
+#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/sandpoint/flash.c b/board/sandpoint/flash.c
new file mode 100644
index 00000000000..572199dd0af
--- /dev/null
+++ b/board/sandpoint/flash.c
@@ -0,0 +1,766 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <asm/pci_io.h>
+#include <w83c553f.h>
+
+#define ROM_CS0_START	0xFF800000
+#define ROM_CS1_START	0xFF000000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+#if 0
+static void flash_get_offsets (ulong base, flash_info_t *info);
+#endif /* 0 */
+
+/*flash command address offsets*/
+
+#if 0
+#define ADDR0           (0x555)
+#define ADDR1           (0x2AA)
+#define ADDR3           (0x001)
+#else
+#define ADDR0		(0xAAA)
+#define ADDR1		(0x555)
+#define ADDR3		(0x001)
+#endif
+
+#define FLASH_WORD_SIZE unsigned char
+
+/*-----------------------------------------------------------------------
+ */
+
+#if 0
+static int byte_parity_odd(unsigned char x) __attribute__ ((const));
+#endif /* 0 */
+static unsigned long flash_id(unsigned char mfct, unsigned char chip) __attribute__ ((const));
+
+typedef struct
+{
+  FLASH_WORD_SIZE extval;
+  unsigned short intval;
+} map_entry;
+
+#if 0
+static int
+byte_parity_odd(unsigned char x)
+{
+  x ^= x >> 4;
+  x ^= x >> 2;
+  x ^= x >> 1;
+  return (x & 0x1) != 0;
+}
+#endif /* 0 */
+
+
+
+static unsigned long
+flash_id(unsigned char mfct, unsigned char chip)
+{
+  static const map_entry mfct_map[] =
+    {
+      {(FLASH_WORD_SIZE) AMD_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
+      {(FLASH_WORD_SIZE) FUJ_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
+      {(FLASH_WORD_SIZE) STM_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
+      {(FLASH_WORD_SIZE) MT_MANUFACT,	(unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
+      {(FLASH_WORD_SIZE) INTEL_MANUFACT,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
+      {(FLASH_WORD_SIZE) INTEL_ALT_MANU,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
+    };
+
+  static const map_entry chip_map[] =
+  {
+    {AMD_ID_F040B,	FLASH_AM040},
+    {(FLASH_WORD_SIZE) STM_ID_x800AB,	FLASH_STM800AB}
+  };
+
+  const map_entry *p;
+  unsigned long result = FLASH_UNKNOWN;
+
+  /* find chip id */
+  for(p = &chip_map[0]; p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
+    if(p->extval == chip)
+    {
+      result = FLASH_VENDMASK | p->intval;
+      break;
+    }
+
+  /* find vendor id */
+  for(p = &mfct_map[0]; p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
+    if(p->extval == mfct)
+    {
+      result &= ~FLASH_VENDMASK;
+      result |= (unsigned long) p->intval << 16;
+      break;
+    }
+
+  return result;
+}
+
+
+
+unsigned long
+flash_init(void)
+{
+  unsigned long i;
+  unsigned char j;
+  static const ulong flash_banks[] = CFG_FLASH_BANKS;
+
+  /* Init: no FLASHes known */
+  for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+  {
+    flash_info_t * const pflinfo = &flash_info[i];
+    pflinfo->flash_id = FLASH_UNKNOWN;
+    pflinfo->size = 0;
+    pflinfo->sector_count = 0;
+  }
+
+  /* Enable writes to Sandpoint flash */
+  {
+    register unsigned char temp;
+    CONFIG_READ_BYTE(CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
+    temp &= ~0x20; /* clear BIOSWP bit */
+    CONFIG_WRITE_BYTE(CFG_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
+  }
+
+  for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++)
+  {
+    flash_info_t * const pflinfo = &flash_info[i];
+    const unsigned long base_address = flash_banks[i];
+    volatile FLASH_WORD_SIZE * const flash = (FLASH_WORD_SIZE *) base_address;
+#if 0
+    volatile FLASH_WORD_SIZE * addr2;
+#endif
+#if 0
+    /* write autoselect sequence */
+    flash[0x5555] = 0xaa;
+    flash[0x2aaa] = 0x55;
+    flash[0x5555] = 0x90;
+#else
+    flash[0xAAA << (3 * i)] = 0xaa;
+    flash[0x555 << (3 * i)] = 0x55;
+    flash[0xAAA << (3 * i)] = 0x90;
+#endif
+    __asm__ __volatile__("sync");
+
+#if 0
+    pflinfo->flash_id = flash_id(flash[0x0], flash[0x1]);
+#else
+    pflinfo->flash_id = flash_id(flash[0x0], flash[0x2 + 14 * i]);
+#endif
+
+    switch(pflinfo->flash_id & FLASH_TYPEMASK)
+    {
+      case FLASH_AM040:
+        pflinfo->size = 0x00080000;
+	pflinfo->sector_count = 8;
+        for(j = 0; j < 8; j++)
+	{
+	  pflinfo->start[j] = base_address + 0x00010000 * j;
+	  pflinfo->protect[j] = flash[(j << 16) | 0x2];
+	}
+	break;
+      case FLASH_STM800AB:
+	pflinfo->size = 0x00100000;
+	pflinfo->sector_count = 19;
+	pflinfo->start[0] = base_address;
+	pflinfo->start[1] = base_address + 0x4000;
+	pflinfo->start[2] = base_address + 0x6000;
+	pflinfo->start[3] = base_address + 0x8000;
+	for(j = 1; j < 16; j++)
+	{
+	  pflinfo->start[j+3] = base_address + 0x00010000 * j;
+	}
+#if 0
+        /* check for protected sectors */
+        for (j = 0; j < pflinfo->sector_count; j++) {
+          /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+          /* D0 = 1 if protected */
+          addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
+            if (pflinfo->flash_id & FLASH_MAN_SST)
+              pflinfo->protect[j] = 0;
+            else
+              pflinfo->protect[j] = addr2[2] & 1;
+        }
+#endif
+	break;
+    }
+    /* Protect monitor and environment sectors
+     */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+    flash_protect(FLAG_PROTECT_SET,
+		CFG_MONITOR_BASE,
+		CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		&flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+    flash_protect(FLAG_PROTECT_SET,
+		CFG_ENV_ADDR,
+		CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		&flash_info[0]);
+#endif
+
+    /* reset device to read mode */
+    flash[0x0000] = 0xf0;
+    __asm__ __volatile__("sync");
+  }
+
+    return flash_info[0].size + flash_info[1].size;
+}
+
+#if 0
+static void
+flash_get_offsets (ulong base, flash_info_t *info)
+{
+    int i;
+
+    /* set up sector start address table */
+        if (info->flash_id & FLASH_MAN_SST)
+          {
+            for (i = 0; i < info->sector_count; i++)
+              info->start[i] = base + (i * 0x00010000);
+          }
+        else
+    if (info->flash_id & FLASH_BTYPE) {
+        /* set sector offsets for bottom boot block type    */
+        info->start[0] = base + 0x00000000;
+        info->start[1] = base + 0x00004000;
+        info->start[2] = base + 0x00006000;
+        info->start[3] = base + 0x00008000;
+        for (i = 4; i < info->sector_count; i++) {
+            info->start[i] = base + (i * 0x00010000) - 0x00030000;
+        }
+    } else {
+        /* set sector offsets for top boot block type       */
+        i = info->sector_count - 1;
+        info->start[i--] = base + info->size - 0x00004000;
+        info->start[i--] = base + info->size - 0x00006000;
+        info->start[i--] = base + info->size - 0x00008000;
+        for (; i >= 0; i--) {
+            info->start[i] = base + i * 0x00010000;
+        }
+    }
+
+}
+#endif /* 0 */
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info(flash_info_t *info)
+{
+  static const char unk[] = "Unknown";
+  const char *mfct = unk, *type = unk;
+  unsigned int i;
+
+  if(info->flash_id != FLASH_UNKNOWN)
+  {
+    switch(info->flash_id & FLASH_VENDMASK)
+    {
+      case FLASH_MAN_AMD:	mfct = "AMD";				break;
+      case FLASH_MAN_FUJ:	mfct = "FUJITSU";			break;
+      case FLASH_MAN_STM:	mfct = "STM";				break;
+      case FLASH_MAN_SST:	mfct = "SST";				break;
+      case FLASH_MAN_BM:	mfct = "Bright Microelectonics";	break;
+      case FLASH_MAN_INTEL:	mfct = "Intel";				break;
+    }
+
+    switch(info->flash_id & FLASH_TYPEMASK)
+    {
+      case FLASH_AM040:		type = "AM29F040B (512K * 8, uniform sector size)";	break;
+      case FLASH_AM400B:	type = "AM29LV400B (4 Mbit, bottom boot sect)";		break;
+      case FLASH_AM400T:	type = "AM29LV400T (4 Mbit, top boot sector)";		break;
+      case FLASH_AM800B:	type = "AM29LV800B (8 Mbit, bottom boot sect)";		break;
+      case FLASH_AM800T:	type = "AM29LV800T (8 Mbit, top boot sector)";		break;
+      case FLASH_AM160T:	type = "AM29LV160T (16 Mbit, top boot sector)";		break;
+      case FLASH_AM320B:	type = "AM29LV320B (32 Mbit, bottom boot sect)";	break;
+      case FLASH_AM320T:	type = "AM29LV320T (32 Mbit, top boot sector)";		break;
+      case FLASH_STM800AB:	type = "M29W800AB (8 Mbit, bottom boot sect)";		break;
+      case FLASH_SST800A:	type = "SST39LF/VF800 (8 Mbit, uniform sector size)";	break;
+      case FLASH_SST160A:	type = "SST39LF/VF160 (16 Mbit, uniform sector size)";	break;
+    }
+  }
+
+  printf(
+    "\n  Brand: %s Type: %s\n"
+    "  Size: %lu KB in %d Sectors\n",
+    mfct,
+    type,
+    info->size >> 10,
+    info->sector_count
+  );
+
+  printf ("  Sector Start Addresses:");
+
+  for (i = 0; i < info->sector_count; i++)
+  {
+    unsigned long size;
+    unsigned int erased;
+    unsigned long * flash = (unsigned long *) info->start[i];
+
+    /*
+     * Check if whole sector is erased
+     */
+    size =
+      (i != (info->sector_count - 1)) ?
+      (info->start[i + 1] - info->start[i]) >> 2 :
+      (info->start[0] + info->size - info->start[i]) >> 2;
+
+    for(
+      flash = (unsigned long *) info->start[i], erased = 1;
+      (flash != (unsigned long *) info->start[i] + size) && erased;
+      flash++
+    )
+      erased = *flash == ~0x0UL;
+
+    printf(
+      "%s %08lX %s %s",
+      (i % 5) ? "" : "\n   ",
+      info->start[i],
+      erased ? "E" : " ",
+      info->protect[i] ? "RO" : "  "
+    );
+  }
+
+  puts("\n");
+  return;
+}
+
+#if 0
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong
+flash_get_size (vu_long *addr, flash_info_t *info)
+{
+   short i;
+    FLASH_WORD_SIZE value;
+    ulong base = (ulong)addr;
+        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+    printf("flash_get_size: \n");
+    /* Write auto select command: read Manufacturer ID */
+    eieio();
+    addr2[ADDR0] = (FLASH_WORD_SIZE)0xAA;
+    addr2[ADDR1] = (FLASH_WORD_SIZE)0x55;
+    addr2[ADDR0] = (FLASH_WORD_SIZE)0x90;
+    value = addr2[0];
+
+    switch (value) {
+    case (FLASH_WORD_SIZE)AMD_MANUFACT:
+        info->flash_id = FLASH_MAN_AMD;
+        break;
+    case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+        info->flash_id = FLASH_MAN_FUJ;
+        break;
+    case (FLASH_WORD_SIZE)SST_MANUFACT:
+        info->flash_id = FLASH_MAN_SST;
+        break;
+    default:
+        info->flash_id = FLASH_UNKNOWN;
+        info->sector_count = 0;
+        info->size = 0;
+        return (0);         /* no or unknown flash  */
+    }
+    printf("recognised manufacturer");
+
+    value = addr2[ADDR3];          /* device ID        */
+        debug ("\ndev_code=%x\n", value);
+
+    switch (value) {
+    case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+        info->flash_id += FLASH_AM400T;
+        info->sector_count = 11;
+        info->size = 0x00080000;
+        break;              /* => 0.5 MB        */
+
+    case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+        info->flash_id += FLASH_AM400B;
+        info->sector_count = 11;
+        info->size = 0x00080000;
+        break;              /* => 0.5 MB        */
+
+    case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+        info->flash_id += FLASH_AM800T;
+        info->sector_count = 19;
+        info->size = 0x00100000;
+        break;              /* => 1 MB      */
+
+    case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+        info->flash_id += FLASH_AM800B;
+        info->sector_count = 19;
+        info->size = 0x00100000;
+        break;              /* => 1 MB      */
+
+    case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+        info->flash_id += FLASH_AM160T;
+        info->sector_count = 35;
+        info->size = 0x00200000;
+        break;              /* => 2 MB      */
+
+    case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+        info->flash_id += FLASH_AM160B;
+        info->sector_count = 35;
+        info->size = 0x00200000;
+        break;              /* => 2 MB      */
+
+    case (FLASH_WORD_SIZE)SST_ID_xF800A:
+        info->flash_id += FLASH_SST800A;
+        info->sector_count = 16;
+        info->size = 0x00100000;
+        break;              /* => 1 MB      */
+
+    case (FLASH_WORD_SIZE)SST_ID_xF160A:
+        info->flash_id += FLASH_SST160A;
+        info->sector_count = 32;
+        info->size = 0x00200000;
+        break;              /* => 2 MB      */
+
+    case (FLASH_WORD_SIZE)AMD_ID_F040B:
+        info->flash_id += FLASH_AM040;
+        info->sector_count = 8;
+        info->size = 0x00080000;
+        break;              /* => 0.5 MB      */
+
+    default:
+        info->flash_id = FLASH_UNKNOWN;
+        return (0);         /* => no or unknown flash */
+
+    }
+
+    printf("flash id %lx; sector count %x, size %lx\n", info->flash_id,info->sector_count,info->size);
+    /* set up sector start address table */
+        if (info->flash_id & FLASH_MAN_SST)
+          {
+            for (i = 0; i < info->sector_count; i++)
+              info->start[i] = base + (i * 0x00010000);
+          }
+        else
+    if (info->flash_id & FLASH_BTYPE) {
+        /* set sector offsets for bottom boot block type    */
+        info->start[0] = base + 0x00000000;
+        info->start[1] = base + 0x00004000;
+        info->start[2] = base + 0x00006000;
+        info->start[3] = base + 0x00008000;
+        for (i = 4; i < info->sector_count; i++) {
+            info->start[i] = base + (i * 0x00010000) - 0x00030000;
+        }
+    } else {
+        /* set sector offsets for top boot block type       */
+        i = info->sector_count - 1;
+        info->start[i--] = base + info->size - 0x00004000;
+        info->start[i--] = base + info->size - 0x00006000;
+        info->start[i--] = base + info->size - 0x00008000;
+        for (; i >= 0; i--) {
+            info->start[i] = base + i * 0x00010000;
+        }
+    }
+
+    /* check for protected sectors */
+    for (i = 0; i < info->sector_count; i++) {
+        /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+        /* D0 = 1 if protected */
+        addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+                if (info->flash_id & FLASH_MAN_SST)
+                  info->protect[i] = 0;
+                else
+                  info->protect[i] = addr2[2] & 1;
+    }
+
+    /*
+     * Prevent writes to uninitialized FLASH.
+     */
+    if (info->flash_id != FLASH_UNKNOWN) {
+       addr2 = (FLASH_WORD_SIZE *)info->start[0];
+        *addr2 = (FLASH_WORD_SIZE)0x00F000F0;   /* reset bank */
+    }
+
+    return (info->size);
+}
+
+#endif
+
+
+int
+flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+    volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+    int flag, prot, sect, l_sect;
+    ulong start, now, last;
+    unsigned char sh8b;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+        if (info->flash_id == FLASH_UNKNOWN) {
+            printf ("- missing\n");
+        } else {
+            printf ("- no sectors to erase\n");
+        }
+        return 1;
+    }
+
+    if ((info->flash_id == FLASH_UNKNOWN) ||
+        (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
+        printf ("Can't erase unknown flash type - aborted\n");
+        return 1;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+        if (info->protect[sect]) {
+            prot++;
+        }
+    }
+
+    if (prot) {
+        printf ("- Warning: %d protected sectors will not be erased!\n",
+            prot);
+    } else {
+        printf ("\n");
+    }
+
+    l_sect = -1;
+
+    /* Check the ROM CS */
+    if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+      sh8b = 3;
+    else
+      sh8b = 0;
+
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last; sect++) {
+        if (info->protect[sect] == 0) { /* not protected */
+            addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+				(info->start[sect] - info->start[0]) << sh8b));
+                        if (info->flash_id & FLASH_MAN_SST)
+                          {
+                            addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+                            addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+                            addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+                            addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+                            addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+                            addr[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
+                            udelay(30000);  /* wait 30 ms */
+                          }
+                        else
+                          addr[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+            l_sect = sect;
+        }
+    }
+
+    /* re-enable interrupts if necessary */
+    if (flag)
+        enable_interrupts();
+
+    /* wait at least 80us - let's wait 1 ms */
+    udelay (1000);
+
+    /*
+     * We wait for the last triggered sector
+     */
+    if (l_sect < 0)
+        goto DONE;
+
+    start = get_timer (0);
+    last  = start;
+    addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+			(info->start[l_sect] - info->start[0]) << sh8b));
+    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+        if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+            printf ("Timeout\n");
+            return 1;
+        }
+        /* show that we're waiting */
+        if ((now - last) > 1000) {  /* every second */
+            serial_putc ('.');
+            last = now;
+        }
+    }
+
+DONE:
+    /* reset to read mode */
+    addr = (FLASH_WORD_SIZE *)info->start[0];
+    addr[0] = (FLASH_WORD_SIZE)0x00F000F0;  /* reset bank */
+
+    printf (" done\n");
+    return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp, data;
+    int i, l, rc;
+
+    wp = (addr & ~3);   /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+        data = 0;
+        for (i=0, cp=wp; i<l; ++i, ++cp) {
+            data = (data << 8) | (*(uchar *)cp);
+        }
+        for (; i<4 && cnt>0; ++i) {
+            data = (data << 8) | *src++;
+            --cnt;
+            ++cp;
+        }
+        for (; cnt==0 && i<4; ++i, ++cp) {
+            data = (data << 8) | (*(uchar *)cp);
+        }
+
+        if ((rc = write_word(info, wp, data)) != 0) {
+            return (rc);
+        }
+        wp += 4;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 4) {
+        data = 0;
+        for (i=0; i<4; ++i) {
+            data = (data << 8) | *src++;
+        }
+        if ((rc = write_word(info, wp, data)) != 0) {
+            return (rc);
+        }
+        wp  += 4;
+        cnt -= 4;
+    }
+
+    if (cnt == 0) {
+        return (0);
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+        data = (data << 8) | *src++;
+        --cnt;
+    }
+    for (; i<4; ++i, ++cp) {
+        data = (data << 8) | (*(uchar *)cp);
+    }
+
+    return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+        volatile FLASH_WORD_SIZE *dest2;
+        volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+    ulong start;
+    int flag;
+        int i;
+    unsigned char sh8b;
+
+    /* Check the ROM CS */
+    if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+      sh8b = 3;
+    else
+      sh8b = 0;
+
+    dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
+				info->start[0]);
+
+    /* Check if Flash is (sufficiently) erased */
+    if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+        return (2);
+    }
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+        for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+          {
+            addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+            addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+            addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
+
+            dest2[i << sh8b] = data2[i];
+
+            /* re-enable interrupts if necessary */
+            if (flag)
+              enable_interrupts();
+
+            /* data polling for D7 */
+            start = get_timer (0);
+            while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
+                   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+              if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+                return (1);
+              }
+            }
+          }
+
+    return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/sbc8260/flash.c b/board/sbc8260/flash.c
new file mode 100644
index 00000000000..ab2bf354c3a
--- /dev/null
+++ b/board/sbc8260/flash.c
@@ -0,0 +1,392 @@
+/*
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Flash Routines for AMD 29F080B devices
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+    unsigned long size;
+    int i;
+
+    /* Init: no FLASHes known */
+    for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	flash_info[i].flash_id = FLASH_UNKNOWN;
+    }
+
+    /* for now, only support the 4 MB Flash SIMM */
+    size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+
+    /*
+     * protect monitor and environment sectors
+     */
+
+#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+    flash_protect(FLAG_PROTECT_SET,
+		  CFG_MONITOR_BASE,
+		  CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		  &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+    flash_protect(FLAG_PROTECT_SET,
+		  CFG_ENV_ADDR,
+		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		  &flash_info[0]);
+#endif
+
+    return /*size*/ (CFG_FLASH0_SIZE * 1024 * 1024);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+    int i;
+
+    if (info->flash_id == FLASH_UNKNOWN) {
+	printf ("missing or unknown FLASH type\n");
+	return;
+    }
+
+    switch ((info->flash_id >> 16) & 0xff) {
+    case 0x1:
+	printf ("AMD ");
+	break;
+    default:
+	printf ("Unknown Vendor ");
+	break;
+    }
+
+    switch (info->flash_id & FLASH_TYPEMASK) {
+    case AMD_ID_F040B:
+	printf ("AM29F040B (4 Mbit)\n");
+	break;
+    case AMD_ID_F080B:
+	printf ("AM29F080B (8 Mbit)\n");
+	break;
+    default:
+	printf ("Unknown Chip Type\n");
+	break;
+    }
+
+    printf ("  Size: %ld MB in %d Sectors\n",
+	    info->size >> 20, info->sector_count);
+
+    printf ("  Sector Start Addresses:");
+    for (i=0; i<info->sector_count; ++i) {
+	if ((i % 5) == 0)
+	  printf ("\n   ");
+	printf (" %08lX%s",
+		info->start[i],
+		info->protect[i] ? " (RO)" : "     "
+		);
+    }
+    printf ("\n");
+    return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+    short i;
+    vu_long vendor, devid;
+    ulong base = (ulong)addr;
+
+/*    printf("addr   = %08lx\n", (unsigned long)addr); */
+
+    /* Reset and Write auto select command: read Manufacturer ID */
+    addr[0] = 0xf0f0f0f0;
+    addr[0x0555] = 0xAAAAAAAA;
+    addr[0x02AA] = 0x55555555;
+    addr[0x0555] = 0x90909090;
+    udelay (1000);
+
+    vendor = addr[0];
+/*    printf("vendor = %08lx\n", vendor); */
+    if (vendor != 0x01010101) {
+	info->size = 0;
+	goto out;
+    }
+
+    devid = addr[1];
+/*    printf("devid  = %08lx\n", devid); */
+
+    if ((devid & 0xff) == AMD_ID_F080B) {
+	info->flash_id     = (vendor & 0xff) << 16 | AMD_ID_F080B;
+	/* we have 16 sectors with 64KB each x 4 */
+	info->sector_count = 16;
+	info->size         = 4 * info->sector_count * 64*1024;
+    }
+    else {
+	info->size = 0;
+	goto out;
+    }
+
+    /* check for protected sectors */
+    for (i = 0; i < info->sector_count; i++) {
+	/* sector base address */
+	info->start[i] = base + i * (info->size / info->sector_count);
+	/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+	/* D0 = 1 if protected */
+	addr = (volatile unsigned long *)(info->start[i]);
+	info->protect[i] = addr[2] & 1;
+    }
+
+    /* reset command */
+    addr = (vu_long *)info->start[0];
+
+out:
+    addr[0] = 0xf0f0f0f0;
+
+    return info->size;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+    vu_long *addr = (vu_long*)(info->start[0]);
+    int flag, prot, sect, l_sect;
+    ulong start, now, last;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+	if (info->flash_id == FLASH_UNKNOWN) {
+	    printf ("- missing\n");
+	} else {
+	    printf ("- no sectors to erase\n");
+	}
+	return 1;
+    }
+
+    prot = 0;
+    for (sect = s_first; sect <= s_last; sect++) {
+	if (info->protect[sect]) {
+	    prot++;
+	}
+    }
+
+    if (prot) {
+	printf ("- Warning: %d protected sectors will not be erased!\n",
+		prot);
+    } else {
+	printf ("\n");
+    }
+
+    l_sect = -1;
+
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+    addr[0x0555] = 0xAAAAAAAA;
+    addr[0x02AA] = 0x55555555;
+    addr[0x0555] = 0x80808080;
+    addr[0x0555] = 0xAAAAAAAA;
+    addr[0x02AA] = 0x55555555;
+    udelay (100);
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last; sect++) {
+	if (info->protect[sect] == 0) {	/* not protected */
+	    addr = (vu_long*)(info->start[sect]);
+	    addr[0] = 0x30303030;
+	    l_sect = sect;
+	}
+    }
+
+    /* re-enable interrupts if necessary */
+    if (flag)
+      enable_interrupts();
+
+    /* wait at least 80us - let's wait 1 ms */
+    udelay (1000);
+
+    /*
+     * We wait for the last triggered sector
+     */
+    if (l_sect < 0)
+      goto DONE;
+
+    start = get_timer (0);
+    last  = start;
+    addr = (vu_long*)(info->start[l_sect]);
+    while ((addr[0] & 0x80808080) != 0x80808080) {
+	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+	    printf ("Timeout\n");
+	    return 1;
+	}
+	/* show that we're waiting */
+	if ((now - last) > 1000) {	/* every second */
+	    serial_putc ('.');
+	    last = now;
+	}
+    }
+
+    DONE:
+    /* reset to read mode */
+    addr = (volatile unsigned long *)info->start[0];
+    addr[0] = 0xF0F0F0F0;	/* reset bank */
+
+    printf (" done\n");
+    return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp, data;
+    int i, l, rc;
+
+    wp = (addr & ~3);	/* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+	data = 0;
+	for (i=0, cp=wp; i<l; ++i, ++cp) {
+	    data = (data << 8) | (*(uchar *)cp);
+	}
+	for (; i<4 && cnt>0; ++i) {
+	    data = (data << 8) | *src++;
+	    --cnt;
+	    ++cp;
+	}
+	for (; cnt==0 && i<4; ++i, ++cp) {
+	    data = (data << 8) | (*(uchar *)cp);
+	}
+
+	if ((rc = write_word(info, wp, data)) != 0) {
+	    return (rc);
+	}
+	wp += 4;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 4) {
+	data = 0;
+	for (i=0; i<4; ++i) {
+	    data = (data << 8) | *src++;
+	}
+	if ((rc = write_word(info, wp, data)) != 0) {
+	    return (rc);
+	}
+	wp  += 4;
+	cnt -= 4;
+    }
+
+    if (cnt == 0) {
+	return (0);
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+	data = (data << 8) | *src++;
+	--cnt;
+    }
+    for (; i<4; ++i, ++cp) {
+	data = (data << 8) | (*(uchar *)cp);
+    }
+
+    return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+    vu_long *addr = (vu_long*)(info->start[0]);
+    ulong start;
+    int flag;
+
+    /* Check if Flash is (sufficiently) erased */
+    if ((*((vu_long *)dest) & data) != data) {
+	return (2);
+    }
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+    addr[0x0555] = 0xAAAAAAAA;
+    addr[0x02AA] = 0x55555555;
+    addr[0x0555] = 0xA0A0A0A0;
+
+    *((vu_long *)dest) = data;
+
+    /* re-enable interrupts if necessary */
+    if (flag)
+      enable_interrupts();
+
+    /* data polling for D7 */
+    start = get_timer (0);
+    while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+	if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	    return (1);
+	}
+    }
+    return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/sbc8260/sbc8260.c b/board/sbc8260/sbc8260.c
new file mode 100644
index 00000000000..48aefa010e2
--- /dev/null
+++ b/board/sbc8260/sbc8260.c
@@ -0,0 +1,289 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PA31 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 *ATMTXEN */
+	/* PA30 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTCA   */
+	/* PA29 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTSOC  */
+	/* PA28 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 *ATMRXEN */
+	/* PA27 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRSOC */
+	/* PA26 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRCA */
+	/* PA25 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
+	/* PA24 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
+	/* PA23 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
+	/* PA22 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
+	/* PA21 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
+	/* PA20 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
+	/* PA19 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
+	/* PA18 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
+	/* PA17 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[7] */
+	/* PA16 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[6] */
+	/* PA15 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[5] */
+	/* PA14 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[4] */
+	/* PA13 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[3] */
+	/* PA12 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[2] */
+	/* PA11 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[1] */
+	/* PA10 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 ATMRXD[0] */
+	/* PA9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC2 TXD */
+	/* PA8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC2 RXD */
+	/* PA7  */ {   1,   0,   0,   1,   0,   0   }, /* PA7 */
+	/* PA6  */ {   1,   0,   0,   1,   0,   0   }, /* PA6 */
+	/* PA5  */ {   1,   0,   0,   1,   0,   0   }, /* PA5 */
+	/* PA4  */ {   1,   0,   0,   1,   0,   0   }, /* PA4 */
+	/* PA3  */ {   1,   0,   0,   1,   0,   0   }, /* PA3 */
+	/* PA2  */ {   1,   0,   0,   1,   0,   0   }, /* PA2 */
+	/* PA1  */ {   1,   0,   0,   1,   0,   0   }, /* PA1 */
+	/* PA0  */ {   1,   0,   0,   1,   0,   0   }  /* PA0 */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   1,   0,   0,   1,   0,   0   }, /* PB17 */
+	/* PB16 */ {   1,   0,   0,   1,   0,   0   }, /* PB16 */
+	/* PB15 */ {   1,   0,   0,   1,   0,   0   }, /* PB15 */
+	/* PB14 */ {   1,   0,   0,   1,   0,   0   }, /* PB14 */
+	/* PB13 */ {   1,   0,   0,   1,   0,   0   }, /* PB13 */
+	/* PB12 */ {   1,   0,   0,   1,   0,   0   }, /* PB12 */
+	/* PB11 */ {   1,   0,   0,   1,   0,   0   }, /* PB11 */
+	/* PB10 */ {   1,   0,   0,   1,   0,   0   }, /* PB10 */
+	/* PB9  */ {   1,   0,   0,   1,   0,   0   }, /* PB9 */
+	/* PB8  */ {   1,   0,   0,   1,   0,   0   }, /* PB8 */
+	/* PB7  */ {   1,   0,   0,   1,   0,   0   }, /* PB7 */
+	/* PB6  */ {   1,   0,   0,   1,   0,   0   }, /* PB6 */
+	/* PB5  */ {   1,   0,   0,   1,   0,   0   }, /* PB5 */
+	/* PB4  */ {   1,   0,   0,   1,   0,   0   }, /* PB4 */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   1,   0,   0,   1,   0,   0   }, /* PC31 */
+	/* PC30 */ {   1,   0,   0,   1,   0,   0   }, /* PC30 */
+	/* PC29 */ {   1,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
+	/* PC28 */ {   1,   0,   0,   1,   0,   0   }, /* PC28 */
+	/* PC27 */ {   1,   0,   0,   1,   0,   0   }, /* PC27 */
+	/* PC26 */ {   1,   0,   0,   1,   0,   0   }, /* PC26 */
+	/* PC25 */ {   1,   0,   0,   1,   0,   0   }, /* PC25 */
+	/* PC24 */ {   1,   0,   0,   1,   0,   0   }, /* PC24 */
+	/* PC23 */ {   1,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
+	/* PC22 */ {   1,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
+	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
+	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
+	/* PC17 */ {   1,   0,   0,   1,   0,   0   }, /* PC17 */
+	/* PC16 */ {   1,   0,   0,   1,   0,   0   }, /* PC16 */
+	/* PC15 */ {   1,   0,   0,   1,   0,   0   }, /* PC15 */
+	/* PC14 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
+	/* PC13 */ {   1,   0,   0,   1,   0,   0   }, /* PC13 */
+	/* PC12 */ {   1,   0,   0,   1,   0,   0   }, /* PC12 */
+	/* PC11 */ {   1,   0,   0,   1,   0,   0   }, /* PC11 */
+	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MDC */
+	/* PC9  */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MDIO */
+	/* PC8  */ {   1,   0,   0,   1,   0,   0   }, /* PC8 */
+	/* PC7  */ {   1,   0,   0,   1,   0,   0   }, /* PC7 */
+	/* PC6  */ {   1,   0,   0,   1,   0,   0   }, /* PC6 */
+	/* PC5  */ {   1,   0,   0,   1,   0,   0   }, /* PC5 */
+	/* PC4  */ {   1,   0,   0,   1,   0,   0   }, /* PC4 */
+	/* PC3  */ {   1,   0,   0,   1,   0,   0   }, /* PC3 */
+	/* PC2  */ {   1,   0,   0,   1,   0,   1   }, /* ENET FDE */
+	/* PC1  */ {   1,   0,   0,   1,   0,   0   }, /* ENET DSQE */
+	/* PC0  */ {   1,   0,   0,   1,   0,   0   }, /* ENET LBK */
+    },
+
+    /* Port D */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
+	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
+	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
+	/* PD28 */ {   1,   0,   0,   1,   0,   0   }, /* PD28 */
+	/* PD27 */ {   1,   0,   0,   1,   0,   0   }, /* PD27 */
+	/* PD26 */ {   1,   0,   0,   1,   0,   0   }, /* PD26 */
+	/* PD25 */ {   1,   0,   0,   1,   0,   0   }, /* PD25 */
+	/* PD24 */ {   1,   0,   0,   1,   0,   0   }, /* PD24 */
+	/* PD23 */ {   1,   0,   0,   1,   0,   0   }, /* PD23 */
+	/* PD22 */ {   1,   0,   0,   1,   0,   0   }, /* PD22 */
+	/* PD21 */ {   1,   0,   0,   1,   0,   0   }, /* PD21 */
+	/* PD20 */ {   1,   0,   0,   1,   0,   0   }, /* PD20 */
+	/* PD19 */ {   1,   0,   0,   1,   0,   0   }, /* PD19 */
+	/* PD18 */ {   1,   0,   0,   1,   0,   0   }, /* PD18 */
+	/* PD17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
+	/* PD16 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
+#if defined(CONFIG_SOFT_I2C)
+	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
+	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
+#else
+#if defined(CONFIG_HARD_I2C)
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+#else /* normal I/O port pins */
+	/* PD15 */ {   1,   0,   0,   1,   0,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   0,   0,   1,   0,   0   }, /* I2C SCL */
+#endif
+#endif
+	/* PD13 */ {   1,   0,   0,   0,   0,   0   }, /* PD13 */
+	/* PD12 */ {   1,   0,   0,   0,   0,   0   }, /* PD12 */
+	/* PD11 */ {   1,   0,   0,   0,   0,   0   }, /* PD11 */
+	/* PD10 */ {   1,   0,   0,   0,   0,   0   }, /* PD10 */
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   1,   0,   0,   1,   0,   1   }, /* PD7 */
+	/* PD6  */ {   1,   0,   0,   1,   0,   1   }, /* PD6 */
+	/* PD5  */ {   1,   0,   0,   1,   0,   1   }, /* PD5 */
+	/* PD4  */ {   1,   0,   0,   1,   0,   1   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: EST SBC8260\n");
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	volatile uchar c = 0, *ramaddr = (uchar *) (CFG_SDRAM_BASE + 0x8);
+	ulong psdmr = CFG_PSDMR;
+	int i;
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+	 */
+
+	memctl->memc_psrt = CFG_PSRT;
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+	*ramaddr = c;
+
+	memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*ramaddr = c;
+
+	/* return total ram size */
+	return (CFG_SDRAM0_SIZE * 1024 * 1024);
+}
+
+#ifdef CONFIG_MISC_INIT_R
+/* ------------------------------------------------------------------------- */
+int misc_init_r (void)
+{
+#ifdef CFG_LED_BASE
+	uchar ds = *(unsigned char *) (CFG_LED_BASE + 1);
+	uchar ss;
+	uchar tmp[64];
+	int res;
+
+	if ((ds != 0) && (ds != 0xff)) {
+		res = getenv_r ("ethaddr", tmp, sizeof (tmp));
+		if (res > 0) {
+			ss = ((ds >> 4) & 0x0f);
+			ss += ss < 0x0a ? '0' : ('a' - 10);
+			tmp[15] = ss;
+
+			ss = (ds & 0x0f);
+			ss += ss < 0x0a ? '0' : ('a' - 10);
+			tmp[16] = ss;
+
+			tmp[17] = '\0';
+			setenv ("ethaddr", tmp);
+			/* set the led to show the address */
+			*((unsigned char *) (CFG_LED_BASE + 1)) = ds;
+		}
+	}
+#endif /* CFG_LED_BASE */
+	return (0);
+}
+#endif /* CONFIG_MISC_INIT_R */
diff --git a/board/shannon/config.mk b/board/shannon/config.mk
new file mode 100644
index 00000000000..736d3af623e
--- /dev/null
+++ b/board/shannon/config.mk
@@ -0,0 +1,23 @@
+#
+# LART board with SA1100 cpu
+#
+# see http://www.lart.tudelft.nl/ for more information on LART
+#
+
+#
+# Tuxscreen has 4 banks of 4 MB DRAM each
+#
+# c000'0000
+# c800'0000
+# d000'0000
+# d800'0000
+#
+# Linux-Kernel is expected to be at c000'8000, entry c000'8000
+#
+# we load ourself to d830'0000, the upper 1 MB of the last (4th) bank
+#
+# download areas is c800'0000
+#
+
+
+TEXT_BASE = 0xd8300000
diff --git a/board/shannon/memsetup.S b/board/shannon/memsetup.S
new file mode 100644
index 00000000000..4f0c464cece
--- /dev/null
+++ b/board/shannon/memsetup.S
@@ -0,0 +1,94 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+MEM_BASE:	.long	0xa0000000
+MEM_START:	.long	0xc0000000
+
+#define	MDCNFG	0x00
+#define MDCAS0	0x04
+#define MDCAS1	0x08
+#define MDCAS2	0x0c
+#define MSC0	0x10
+#define MSC1	0x14
+#define MECR	0x18
+
+mdcas0:		.long	0xc71c703f @ cccccccf
+mdcas1:		.long	0xffc71c71 @ fffffffc
+mdcas2:		.long	0xffffffff @ ffffffff
+mdcnfg:		.long	0x0334b21f @ 9326991f
+msc0:		.long   0xfff84458 @ 42304230
+msc1:		.long	0xffffffff @ 20182018
+mecr:		.long	0x7fff7fff @ 01000000
+
+/* setting up the memory */
+
+.globl memsetup
+memsetup:
+	ldr	r0, MEM_BASE
+
+	/* Setup the flash memory */
+	ldr	r1, msc0
+	str	r1, [r0, #MSC0]
+
+	/* Set up the DRAM */
+
+	/* MDCAS0 */
+	ldr	r1, mdcas0
+	str	r1, [r0, #MDCAS0]
+
+	/* MDCAS1 */
+	ldr	r1, mdcas1
+	str	r1, [r0, #MDCAS1]
+
+	/* MDCAS2 */
+	ldr	r1, mdcas2
+	str	r1, [r0, #MDCAS2]
+
+	/* MDCNFG */
+	ldr	r1, mdcnfg
+	str	r1, [r0, #MDCNFG]
+
+	/* Set up PCMCIA space */
+	ldr	r1, mecr
+	str	r1, [r0, #MECR]
+
+	/* Load something to activate bank */
+	ldr	r1, MEM_START
+
+.rept	8
+	ldr	r0, [r1]
+.endr
+
+	/* everything is fine now */
+	mov	pc, lr
+
diff --git a/board/siemens/IAD210/config.mk b/board/siemens/IAD210/config.mk
new file mode 100644
index 00000000000..c30abcb274d
--- /dev/null
+++ b/board/siemens/IAD210/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# iad210 boards
+#
+
+TEXT_BASE = 0x08000000
+/*TEXT_BASE  = 0x00200000 */
diff --git a/board/smdk2400/config.mk b/board/smdk2400/config.mk
new file mode 100644
index 00000000000..18c412a45ae
--- /dev/null
+++ b/board/smdk2400/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# SAMSUNG board with S3C2400X (ARM920T) CPU
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# SAMSUNG has 1 bank of 32 MB DRAM
+#
+# 0C00'0000 to 0E00'0000
+#
+# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
+# optionally with a ramdisk at 0c80'0000
+#
+# we load ourself to 0CF00000 (must be high enough not to be
+# overwritten by the uncompessing Linux kernel)
+#
+# download area is 0C80'0000
+#
+
+
+TEXT_BASE = 0x0CF00000
diff --git a/board/smdk2400/memsetup.S b/board/smdk2400/memsetup.S
new file mode 100644
index 00000000000..b53e996f253
--- /dev/null
+++ b/board/smdk2400/memsetup.S
@@ -0,0 +1,165 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the Samsung development board by
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+/*
+ *
+ * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
+ *
+ * Copyright (C) 2001 Samsung Electronics by chc, 010406
+ *
+ * S3C2400 specific tweaks.
+ *
+ */
+
+/* memory controller */
+#define BWSCON 0x14000000
+#define BANKCON3 0x14000010	/* for cs8900, ethernet */
+
+/* Bank0 */
+#define B0_Tacs	0x0	/* 0 clk */
+#define B0_Tcos	0x0	/* 0 clk */
+#define B0_Tacc	0x7	/* 14 clk */
+#define B0_Tcoh	0x0	/* 0 clk */
+#define B0_Tah	0x0	/* 0 clk */
+#define B0_Tacp	0x0
+#define B0_PMC	0x0	/* normal */
+
+/* Bank1 */
+#define B1_Tacs	0x0	/* 0 clk */
+#define B1_Tcos	0x0	/* 0 clk */
+#define B1_Tacc	0x7	/* 14 clk */
+#define B1_Tcoh	0x0	/* 0 clk */
+#define B1_Tah	0x0	/* 0 clk */
+#define B1_Tacp	0x0
+#define B1_PMC	0x0	/* normal */
+
+/* Bank2 */
+#define B2_Tacs	0x0	/* 0 clk */
+#define B2_Tcos	0x0	/* 0 clk */
+#define B2_Tacc	0x7	/* 14 clk */
+#define B2_Tcoh	0x0	/* 0 clk */
+#define B2_Tah	0x0	/* 0 clk */
+#define B2_Tacp	0x0
+#define B2_PMC	0x0	/* normal */
+
+/* Bank3 - setup for the cs8900 */
+#define B3_Tacs	0x0	/* 0 clk */
+#define B3_Tcos	0x3	/* 4 clk */
+#define B3_Tacc	0x7	/* 14 clk */
+#define B3_Tcoh	0x1	/* 1 clk */
+#define B3_Tah	0x0	/* 0 clk */
+#define B3_Tacp	0x3	/* 6 clk */
+#define B3_PMC	0x0	/* normal */
+
+/* Bank4 */
+#define B4_Tacs	0x0	/* 0 clk */
+#define B4_Tcos	0x0	/* 0 clk */
+#define B4_Tacc	0x7	/* 14 clk */
+#define B4_Tcoh	0x0	/* 0 clk */
+#define B4_Tah	0x0	/* 0 clk */
+#define B4_Tacp	0x0
+#define B4_PMC	0x0	/* normal */
+
+/* Bank5 */
+#define B5_Tacs	0x0	/* 0 clk */
+#define B5_Tcos	0x0	/* 0 clk */
+#define B5_Tacc	0x7	/* 14 clk */
+#define B5_Tcoh	0x0	/* 0 clk */
+#define B5_Tah	0x0	/* 0 clk */
+#define B5_Tacp	0x0
+#define B5_PMC	0x0	/* normal */
+
+/* Bank6 */
+#define	B6_MT	0x3	/* SDRAM */
+#define	B6_Trcd	0x1	/* 3clk */
+#define	B6_SCAN	0x1	/* 9 bit */
+
+/* Bank7 */
+#define	B7_MT	0x3	/* SDRAM */
+#define	B7_Trcd	0x1	/* 3clk */
+#define	B7_SCAN	0x1	/* 9 bit */
+
+/* refresh parameter */
+#define REFEN	0x1	/* enable refresh */
+#define TREFMD	0x0	/* CBR(CAS before RAS)/auto refresh */
+#define Trp	0x0	/* 2 clk */
+#define Trc	0x3	/* 7 clk */
+#define Tchr	0x2 	/* 3 clk */
+
+#define REFCNT	1113	/* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
+
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl memsetup
+memsetup:
+	/* memory control configuration */
+	/* make r0 relative the current location so that it */
+	/* reads SMRDATA out of FLASH rather than memory ! */
+	ldr     r0, =SMRDATA
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
+	add     r2, r0, #52
+0:
+	ldr     r3, [r0], #4
+	str     r3, [r1], #4
+	cmp     r2, r0
+	bne     0b
+
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+/* the literal pools origin */
+
+SMRDATA:
+	.word	0x2211d114	/* d->Ethernet, BUSWIDTH=32 */
+	.word	((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
+	.word	((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
+	.word	((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
+	.word	((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
+	.word	((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
+	.word	((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
+	.word	((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
+	.word	((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
+	.word	((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+	.word	0x10	/* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
+	.word	0x30	/* MRSR6, CL=3clk */
+	.word	0x30	/* MRSR7 */
+
diff --git a/board/smdk2410/config.mk b/board/smdk2410/config.mk
new file mode 100644
index 00000000000..b06b493c79e
--- /dev/null
+++ b/board/smdk2410/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# SMDK2410 has 1 bank of 64 MB DRAM
+#
+# 3000'0000 to 3400'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# we load ourself to 33F0'0000
+#
+# download area is 3300'0000
+#
+
+
+TEXT_BASE = 0x33F00000
diff --git a/board/trab/config.mk b/board/trab/config.mk
new file mode 100644
index 00000000000..37ed5b1cce4
--- /dev/null
+++ b/board/trab/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# TRAB board with S3C2400X (arm920t) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# TRAB has 1 bank of 16 MB DRAM
+#
+# 0c00'0000 to 0e00'0000
+#
+# Linux-Kernel is expected to be at 0c00'8000, entry 0c00'8000
+#
+# we load ourself to 0cf0'0000
+#
+# download areas is 0c80'0000
+#
+
+
+TEXT_BASE = 0x0cf00000
diff --git a/board/trab/memsetup.S b/board/trab/memsetup.S
new file mode 100644
index 00000000000..ea4bccc8b82
--- /dev/null
+++ b/board/trab/memsetup.S
@@ -0,0 +1,168 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the TRAB board by
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/* some parameters for the board */
+
+/*
+ *
+ * Copied from linux/arch/arm/boot/compressed/head-s3c2400.S
+ *
+ * Copyright (C) 2001 Samsung Electronics by chc, 010406
+ *
+ * TRAB specific tweaks.
+ *
+ */
+
+/* memory controller */
+#define BWSCON 0x14000000
+
+/* Bank0 */
+#define B0_Tacs	0x0	/* 0 clk */
+#define B0_Tcos	0x0	/* 0 clk */
+#define B0_Tacc	0x7	/* 14 clk */
+#define B0_Tcoh	0x0	/* 0 clk */
+#define B0_Tah	0x0	/* 0 clk */
+#define B0_Tacp	0x0
+#define B0_PMC	0x0	/* normal */
+
+/* Bank1 - SRAM */
+#define B1_Tacs	0x0	/* 0 clk */
+#define B1_Tcos	0x0	/* 0 clk */
+#define B1_Tacc	0x7	/* 14 clk */
+#define B1_Tcoh	0x0	/* 0 clk */
+#define B1_Tah	0x0	/* 0 clk */
+#define B1_Tacp	0x0
+#define B1_PMC	0x0	/* normal */
+
+/* Bank2 - CPLD */
+#define B2_Tacs	0x0	/* 0 clk */
+#define B2_Tcos	0x4	/* 4 clk */
+#define B2_Tacc	0x7	/* 14 clk */
+#define B2_Tcoh	0x4	/* 4 clk */
+#define B2_Tah	0x0	/* 0 clk */
+#define B2_Tacp	0x0
+#define B2_PMC	0x0	/* normal */
+
+/* Bank3 - setup for the cs8900 */
+#define B3_Tacs	0x3	/* 4 clk */
+#define B3_Tcos	0x3	/* 4 clk */
+#define B3_Tacc	0x7	/* 14 clk */
+#define B3_Tcoh	0x1	/* 1 clk */
+#define B3_Tah	0x0	/* 0 clk */
+#define B3_Tacp	0x3	/* 6 clk */
+#define B3_PMC	0x0	/* normal */
+
+/* Bank4 */
+#define B4_Tacs	0x0	/* 0 clk */
+#define B4_Tcos	0x0	/* 0 clk */
+#define B4_Tacc	0x7	/* 14 clk */
+#define B4_Tcoh	0x0	/* 0 clk */
+#define B4_Tah	0x0	/* 0 clk */
+#define B4_Tacp	0x0
+#define B4_PMC	0x0	/* normal */
+
+/* Bank5 */
+#define B5_Tacs	0x0	/* 0 clk */
+#define B5_Tcos	0x0	/* 0 clk */
+#define B5_Tacc	0x7	/* 14 clk */
+#define B5_Tcoh	0x0	/* 0 clk */
+#define B5_Tah	0x0	/* 0 clk */
+#define B5_Tacp	0x0
+#define B5_PMC	0x0	/* normal */
+
+/* Bank6 */
+#define	B6_MT	0x3	/* SDRAM */
+#define	B6_Trcd	0x1	/* 2clk */
+#define	B6_SCAN	0x0	/* 8 bit */
+
+/* Bank7 */
+#define	B7_MT	0x3	/* SDRAM */
+#define	B7_Trcd	0x1	/* 2clk */
+#define	B7_SCAN	0x0	/* 8 bit */
+
+/* refresh parameter */
+#define REFEN	0x1	/* enable refresh */
+#define TREFMD	0x0	/* CBR(CAS before RAS)/auto refresh */
+#define Trp	0x0	/* 2 clk */
+#define Trc	0x3	/* 7 clk */
+#define Tchr	0x2 	/* 3 clk */
+
+#ifdef CONFIG_TRAB_50MHZ
+#define REFCNT	1269	/* period=15.6 us, HCLK=50Mhz, (2048+1-15.6*50) */
+#else
+#define REFCNT	1011	/* period=15.6 us, HCLK=66.5Mhz, (2048+1-15.6*66.5) */
+#endif
+
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl memsetup
+memsetup:
+	/* memory control configuration */
+	/* make r0 relative the current location so that it */
+	/* reads SMRDATA out of FLASH rather than memory ! */
+	ldr     r0, =SMRDATA
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
+	add     r2, r0, #52
+0:
+	ldr     r3, [r0], #4
+	str     r3, [r1], #4
+	cmp     r2, r0
+	bne     0b
+
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+/* the literal pools origin */
+
+SMRDATA:
+	.word	0x2211d644	/* d->Ethernet, 6->CPLD, 4->SRAM, 4->FLASH */
+	.word	((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
+	.word	((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
+	.word	((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
+	.word	((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
+	.word	((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
+	.word	((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
+	.word	((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
+	.word	((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
+	.word	((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+	.word	0x17	/* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 16M/16M */
+	.word	0x30	/* MRSR6, CL=3clk */
+	.word	0x30	/* MRSR7 */
+
diff --git a/board/utx8245/flash.c b/board/utx8245/flash.c
new file mode 100644
index 00000000000..947fbc3aa5e
--- /dev/null
+++ b/board/utx8245/flash.c
@@ -0,0 +1,491 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Gregory E. Allen, gallen@arlut.utexas.edu
+ * Matthew E. Karger, karger@arlut.utexas.edu
+ * Applied Research Laboratories, The University of Texas at Austin
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+#define ROM_CS0_START	0xFF800000
+#define ROM_CS1_START	0xFF000000
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+#define	FLASH_BANK_SIZE	0x200000
+#define	MAIN_SECT_SIZE 	0x10000
+#define	SECT_SIZE_32KB	0x8000
+#define	SECT_SIZE_8KB	0x2000
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+static __inline__ unsigned long get_msr(void)
+{	unsigned long msr;
+	__asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+    return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+    __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
+
+/*flash command address offsets*/
+#define ADDR0		(0x555)
+#define ADDR1		(0xAAA)
+#define ADDR3		(0x001)
+
+#define FLASH_WORD_SIZE unsigned char
+
+/*---------------------------------------------------------------------*/
+/*#define	DEBUG_FLASH	1 */
+
+/*---------------------------------------------------------------------*/
+
+unsigned long flash_init(void)
+{
+    int i, j;
+    ulong size = 0;
+	unsigned char manuf_id, device_id;
+
+    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+	{
+    	vu_char *addr = (vu_char *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+
+	addr[0x555] = 0xAA;			/* 3 cycles to read device info.  See */
+	addr[0x2AA] = 0x55;			/* AM29LV116D datasheet for list of */
+	addr[0x555] = 0x90;			/* available commands. */
+
+	manuf_id = addr[0];
+	device_id = addr[1];
+
+#if defined DEBUG_FLASH
+	printf("manuf_id = %x, device_id = %x\n", manuf_id, device_id);
+#endif
+
+		if (  (manuf_id == (uchar)(AMD_MANUFACT)) &&
+	    	( device_id == AMD_ID_LV116DT))
+		{
+	    	flash_info[i].flash_id = ((FLASH_MAN_AMD & FLASH_VENDMASK) << 16) |
+	    			     (AMD_ID_LV116DT & FLASH_TYPEMASK);
+		} else {
+	    	flash_info[i].flash_id = FLASH_UNKNOWN;
+	    	addr[0] = (long)0xFFFFFFFF;
+	    	goto Done;
+		}
+
+#if defined DEBUG_FLASH
+		printf ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+#endif
+
+		addr[0] = (long)0xFFFFFFFF;
+
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+		for (j = 0; j < flash_info[i].sector_count; j++)
+		{
+
+			if (j < (CFG_MAX_FLASH_SECT - 3) )
+
+				flash_info[i].start[j] = CFG_FLASH_BASE + i * FLASH_BANK_SIZE +
+			                       			j * MAIN_SECT_SIZE;
+
+			else if (j == (CFG_MAX_FLASH_SECT - 3) )
+
+				flash_info[i].start[j] =  flash_info[i].start[j-1] + SECT_SIZE_32KB;
+
+
+			else
+
+				flash_info[i].start[j] =  flash_info[i].start[j-1] + SECT_SIZE_8KB;
+
+		}
+
+	size += flash_info[i].size;
+    }
+
+    /* Protect monitor and environment sectors
+     */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+     flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+    flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+					CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+#endif
+
+Done:
+    return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t *info)
+{
+  static const char unk[] = "Unknown";
+  const char *mfct = unk, *type = unk;
+  unsigned int i;
+
+  if(info->flash_id != FLASH_UNKNOWN)
+  {
+    switch(info->flash_id & FLASH_VENDMASK)
+    {
+      case FLASH_MAN_AMD:	mfct = "AMD";				break;
+      case FLASH_MAN_FUJ:	mfct = "FUJITSU";			break;
+      case FLASH_MAN_STM:	mfct = "STM";				break;
+      case FLASH_MAN_SST:	mfct = "SST";				break;
+      case FLASH_MAN_BM:	mfct = "Bright Microelectonics";	break;
+      case FLASH_MAN_INTEL:	mfct = "Intel";				break;
+    }
+
+    switch(info->flash_id & FLASH_TYPEMASK)
+    {
+      case FLASH_AM040:		type = "AM29F040B (512K * 8, uniform sector size)";	break;
+      case FLASH_AM400B:	type = "AM29LV400B (4 Mbit, bottom boot sect)";		break;
+      case FLASH_AM400T:	type = "AM29LV400T (4 Mbit, top boot sector)";		break;
+      case FLASH_AM800B:	type = "AM29LV800B (8 Mbit, bottom boot sect)";		break;
+      case FLASH_AM800T:	type = "AM29LV800T (8 Mbit, top boot sector)";		break;
+      case FLASH_AM160T:	type = "AM29LV160T (16 Mbit, top boot sector)";		break;
+      case FLASH_AM320B:	type = "AM29LV320B (32 Mbit, bottom boot sect)";	break;
+      case FLASH_AM320T:	type = "AM29LV320T (32 Mbit, top boot sector)";		break;
+      case FLASH_STM800AB:	type = "M29W800AB (8 Mbit, bottom boot sect)";		break;
+      case FLASH_SST800A:	type = "SST39LF/VF800 (8 Mbit, uniform sector size)";	break;
+      case FLASH_SST160A:	type = "SST39LF/VF160 (16 Mbit, uniform sector size)";	break;
+    }
+  }
+
+  printf(
+    "\n  Brand: %s Type: %s\n"
+    "  Size: %lu KB in %d Sectors\n",
+    mfct,
+    type,
+    info->size >> 10,
+    info->sector_count
+  );
+
+  printf ("  Sector Start Addresses:");
+
+  for (i = 0; i < info->sector_count; i++)
+  {
+    unsigned long size;
+    unsigned int erased;
+    unsigned long * flash = (unsigned long *) info->start[i];
+
+    /*
+     * Check if whole sector is erased
+     */
+    size =
+      (i != (info->sector_count - 1)) ?
+      (info->start[i + 1] - info->start[i]) >> 2 :
+      (info->start[0] + info->size - info->start[i]) >> 2;
+
+    for(
+      flash = (unsigned long *) info->start[i], erased = 1;
+      (flash != (unsigned long *) info->start[i] + size) && erased;
+      flash++
+    )
+      erased = *flash == ~0x0UL;
+
+    printf(
+      "%s %08lX %s %s",
+      (i % 5) ? "" : "\n   ",
+      info->start[i],
+      erased ? "E" : " ",
+      info->protect[i] ? "RO" : "  "
+    );
+  }
+
+  puts("\n");
+  return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+    int flag, prot, sect, l_sect;
+    ulong start, now, last;
+    unsigned char sh8b;
+
+    if ((s_first < 0) || (s_first > s_last)) {
+        if (info->flash_id == FLASH_UNKNOWN) {
+            printf ("- missing\n");
+        } else {
+            printf ("- no sectors to erase\n");
+        }
+        return 1;
+    }
+
+    if ((info->flash_id == FLASH_UNKNOWN) ||
+        (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
+        printf ("Can't erase unknown flash type - aborted\n");
+        return 1;
+    }
+
+    prot = 0;
+    for (sect=s_first; sect<=s_last; ++sect) {
+        if (info->protect[sect]) {
+            prot++;
+        }
+    }
+
+    if (prot) {
+        printf ("- Warning: %d protected sectors will not be erased!\n",
+            prot);
+    } else {
+        printf ("\n");
+    }
+
+    l_sect = -1;
+
+    /* Check the ROM CS */
+    if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+      sh8b = 3;
+    else
+      sh8b = 0;
+
+	/* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+    addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+    addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+
+    /* Start erase on unprotected sectors */
+    for (sect = s_first; sect<=s_last; sect++)
+	{
+        if (info->protect[sect] == 0)
+		{ /* not protected */
+            addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+				(info->start[sect] - info->start[0]) << sh8b));
+
+			if (info->flash_id & FLASH_MAN_SST)
+			{
+				addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+				addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+ 				addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
+				addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+				addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+				addr[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
+				udelay(30000);  /* wait 30 ms */
+			}
+
+			else
+				addr[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+
+			l_sect = sect;
+        }
+    }
+
+    /* re-enable interrupts if necessary */
+    if (flag)
+        enable_interrupts();
+
+    /* wait at least 80us - let's wait 1 ms */
+    udelay (1000);
+
+    /*
+     * We wait for the last triggered sector
+     */
+    if (l_sect < 0)
+        goto DONE;
+
+    start = get_timer (0);
+    last  = start;
+    addr = (FLASH_WORD_SIZE *)(info->start[0] + (
+			(info->start[l_sect] - info->start[0]) << sh8b));
+    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+        if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+            printf ("Timeout\n");
+            return 1;
+        }
+        /* show that we're waiting */
+        if ((now - last) > 1000) {  /* every second */
+            serial_putc ('.');
+            last = now;
+        }
+    }
+
+DONE:
+    /* reset to read mode */
+    addr = (FLASH_WORD_SIZE *)info->start[0];
+    addr[0] = (FLASH_WORD_SIZE)0x00F000F0;  /* reset bank */
+
+    printf (" done\n");
+    return 0;
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+    ulong cp, wp, data;
+    int i, l, rc;
+
+    wp = (addr & ~3);   /* get lower word aligned address */
+
+    /*
+     * handle unaligned start bytes
+     */
+    if ((l = addr - wp) != 0) {
+        data = 0;
+        for (i=0, cp=wp; i<l; ++i, ++cp) {
+            data = (data << 8) | (*(uchar *)cp);
+        }
+        for (; i<4 && cnt>0; ++i) {
+            data = (data << 8) | *src++;
+            --cnt;
+            ++cp;
+        }
+        for (; cnt==0 && i<4; ++i, ++cp) {
+            data = (data << 8) | (*(uchar *)cp);
+        }
+
+        if ((rc = write_word(info, wp, data)) != 0) {
+            return (rc);
+        }
+        wp += 4;
+    }
+
+    /*
+     * handle word aligned part
+     */
+    while (cnt >= 4) {
+        data = 0;
+        for (i=0; i<4; ++i) {
+            data = (data << 8) | *src++;
+        }
+        if ((rc = write_word(info, wp, data)) != 0) {
+            return (rc);
+        }
+        wp  += 4;
+        cnt -= 4;
+    }
+
+    if (cnt == 0) {
+        return (0);
+    }
+
+    /*
+     * handle unaligned tail bytes
+     */
+    data = 0;
+    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+        data = (data << 8) | *src++;
+        --cnt;
+    }
+    for (; i<4; ++i, ++cp) {
+        data = (data << 8) | (*(uchar *)cp);
+    }
+
+    return (write_word(info, wp, data));
+}
+
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
+	volatile FLASH_WORD_SIZE *dest2;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+	ulong start;
+	int flag;
+	int i;
+	unsigned char sh8b;
+
+    /* Check the ROM CS */
+    if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
+      sh8b = 3;
+    else
+      sh8b = 0;
+
+    dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
+				info->start[0]);
+
+    /* Check if Flash is (sufficiently) erased */
+    if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
+        return (2);
+    }
+    /* Disable interrupts which might cause a timeout here */
+    flag = disable_interrupts();
+
+        for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
+          {
+            addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
+            addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
+            addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
+
+            dest2[i << sh8b] = data2[i];
+
+            /* re-enable interrupts if necessary */
+            if (flag)
+              enable_interrupts();
+
+            /* data polling for D7 */
+            start = get_timer (0);
+            while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
+                   (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
+              if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+                return (1);
+              }
+            }
+          }
+
+    return (0);
+}
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/walnut405/flash.c b/board/walnut405/flash.c
new file mode 100644
index 00000000000..81f950ba8cb
--- /dev/null
+++ b/board/walnut405/flash.c
@@ -0,0 +1,730 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#ifdef CONFIG_ADCIOP
+#define ADDR0           0x0aa9
+#define ADDR1           0x0556
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_CPCI405
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_WALNUT405
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+        uint pbcr;
+        unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1)
+	  {
+	    /* Setup offsets */
+	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	    /* Monitor protection ON by default */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				FLASH_BASE0_PRELIM,
+				FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+				&flash_info[0]);
+	    size_b1 = 0 ;
+	    flash_info[0].size = size_b0;
+	  }
+
+	/* 2 banks */
+	else
+	  {
+	    size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+	    /* Re-do sizing to get full correct info */
+
+	    if (size_b1)
+	      {
+		mtdcr(ebccfga, pb0cr);
+		pbcr = mfdcr(ebccfgd);
+		mtdcr(ebccfga, pb0cr);
+		base_b1 = -size_b1;
+		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+		mtdcr(ebccfgd, pbcr);
+		/*          printf("pb1cr = %x\n", pbcr); */
+	      }
+
+	    if (size_b0)
+	      {
+		mtdcr(ebccfga, pb1cr);
+		pbcr = mfdcr(ebccfgd);
+		mtdcr(ebccfga, pb1cr);
+		base_b0 = base_b1 - size_b0;
+		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+		mtdcr(ebccfgd, pbcr);
+		/*            printf("pb0cr = %x\n", pbcr); */
+	      }
+
+	    size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+	    flash_get_offsets (base_b0, &flash_info[0]);
+
+	    /* monitor protection ON by default */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				base_b0+size_b0-CFG_MONITOR_LEN,
+				base_b0+size_b0-1,
+				&flash_info[0]);
+
+	    if (size_b1) {
+	      /* Re-do sizing to get full correct info */
+	      size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+	      flash_get_offsets (base_b1, &flash_info[1]);
+
+	      /* monitor protection ON by default */
+	      (void)flash_protect(FLAG_PROTECT_SET,
+				  base_b1+size_b1-CFG_MONITOR_LEN,
+				  base_b1+size_b1-1,
+				  &flash_info[1]);
+	      /* monitor protection OFF by default (one is enough) */
+	      (void)flash_protect(FLAG_PROTECT_CLEAR,
+				  base_b0+size_b0-CFG_MONITOR_LEN,
+				  base_b0+size_b0-1,
+				  &flash_info[0]);
+	    } else {
+	      flash_info[1].flash_id = FLASH_UNKNOWN;
+	      flash_info[1].sector_count = -1;
+	    }
+
+	    flash_info[0].size = size_b0;
+	    flash_info[1].size = size_b1;
+	  }/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id  == FLASH_AM040)){
+	    for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+        } else {
+	    if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	    } else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	    }
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+        int k;
+        int size;
+        int erased;
+        volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+				break;
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+				break;
+	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+				break;
+	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+                /*
+                 * Check if whole sector is erased
+                 */
+                if (i != (info->sector_count-1))
+                  size = info->start[i+1] - info->start[i];
+                else
+                  size = info->start[0] + info->size - info->start[i];
+                erased = 1;
+                flash = (volatile unsigned long *)info->start[i];
+                size = size >> 2;        /* divide by 4 for longword access */
+                for (k=0; k<size; k++)
+                  {
+                    if (*flash++ != 0xffffffff)
+                      {
+                        erased = 0;
+                        break;
+                      }
+                  }
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+#if 0 /* test-only */
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+#else
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   "
+#endif
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	FLASH_WORD_SIZE value;
+	ulong base = (ulong)addr;
+        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[2];
+#else
+	value = addr2[0];
+#endif
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (FLASH_WORD_SIZE)SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[0];			/* device ID		*/
+        /*        printf("\ndev_code=%x\n", value); */
+#else
+	value = addr2[1];			/* device ID		*/
+#endif
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_ID_F040B:
+	        info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000; /* => 512 ko */
+		break;
+	case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;				/* => 0.5 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;				/* => 0.5 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+#if 0	/* enable when device IDs are available */
+	case (FLASH_WORD_SIZE)AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+#endif
+	case (FLASH_WORD_SIZE)SST_ID_xF800A:
+		info->flash_id += FLASH_SST800A;
+		info->sector_count = 16;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (FLASH_WORD_SIZE)SST_ID_xF160A:
+		info->flash_id += FLASH_SST160A;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id  == FLASH_AM040)){
+	    for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+        } else {
+	    if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	    } else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	    }
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+		info->protect[i] = addr2[4] & 1;
+#else
+		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+                  info->protect[i] = 0;
+                else
+                  info->protect[i] = addr2[2] & 1;
+#endif
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+		addr2 = (volatile unsigned char *)info->start[0];
+                addr2[ADDR0] = 0xAA;
+                addr2[ADDR1] = 0x55;
+                addr2[ADDR0] = 0xF0;  /* reset bank */
+#else
+		addr2 = (FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+#endif
+#else /* test-only */
+		addr2 = (FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+#endif /* test-only */
+	}
+
+	return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+	start = get_timer (0);
+    last  = start;
+    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+        if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+            printf ("Timeout\n");
+            return -1;
+        }
+        /* show that we're waiting */
+        if ((now - last) > 1000) {  /* every second */
+            putc ('.');
+            last = now;
+        }
+    }
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+		    addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+		    printf("Erasing sector %p\n", addr2);	/* CLH */
+
+		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			for (i=0; i<50; i++)
+				udelay(1000);  /* wait 1 ms */
+		    } else {
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+		    }
+		    l_sect = sect;
+		    /*
+		     * Wait for each sector to complete, it's more
+		     * reliable.  According to AMD Spec, you must
+		     * issue all erase commands within a specified
+		     * timeout.  This has been seen to fail, especially
+		     * if printf()s are included (for debug)!!
+		     */
+		    wait_for_DQ7(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+#if 0
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+	wait_for_DQ7(info, l_sect);
+
+DONE:
+#endif
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *) dest) &
+	    (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts ();
+
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts ();
+
+		/* data polling for D7 */
+		start = get_timer (0);
+		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/walnut405/init.S b/board/walnut405/init.S
new file mode 100644
index 00000000000..d141707219d
--- /dev/null
+++ b/board/walnut405/init.S
@@ -0,0 +1,99 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/*       This source code has been made available to you by IBM on an AS-IS */
+/*       basis.  Anyone receiving this source is licensed under IBM */
+/*       copyrights to use it in any way he or she deems fit, including */
+/*       copying it, modifying it, compiling it, and redistributing it either */
+/*       with or without modifications.  No license under IBM patents or */
+/*       patent applications is to be implied by the copyright license. */
+/* */
+/*       Any user of this software should understand that IBM cannot provide */
+/*       technical support for this software and will not be responsible for */
+/*       any consequences resulting from the use of this software. */
+/* */
+/*       Any person who transfers this source code or any derivative work */
+/*       must include the IBM copyright notice, this paragraph, and the */
+/*       preceding two paragraphs in the transferred software. */
+/* */
+/*       COPYRIGHT   I B M   CORPORATION 1995 */
+/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function:     ext_bus_cntlr_init */
+/* Description:  Initializes the External Bus Controller for the external */
+/*		peripherals. IMPORTANT: For pass1 this code must run from */
+/*		cache since you can not reliably change a peripheral banks */
+/*		timing register (pbxap) while running code from that bank. */
+/*		For ex., since we are running from ROM on bank 0, we can NOT */
+/*		execute the code that modifies bank 0 timings from ROM, so */
+/*		we run it from cache. */
+/*	Bank 0 - Flash and SRAM */
+/*	Bank 1 - NVRAM/RTC */
+/*	Bank 2 - Keyboard/Mouse controller */
+/*	Bank 3 - IR controller */
+/*	Bank 4 - not used */
+/*	Bank 5 - not used */
+/*	Bank 6 - not used */
+/*	Bank 7 - FPGA registers */
+/*----------------------------------------------------------------------------- */
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+     	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+        mflr    r4                      /* save link register */
+        bl      ..getAddr
+..getAddr:
+        mflr    r3                      /* get address of ..getAddr */
+        mtlr    r4                      /* restore link register */
+        addi    r4,0,14                 /* set ctr to 10; used to prefetch */
+        mtctr   r4                      /* 10 cache lines to fit this function */
+                                        /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+        icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+        addi    r3,r3,32		/* move to next cache line */
+        bdnz    ..ebcloop               /* continue for 10 cache lines */
+
+        /*------------------------------------------------------------------- */
+        /* Delay to ensure all accesses to ROM are complete before changing */
+	/* bank 0 timings. 200usec should be enough. */
+        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+        /*------------------------------------------------------------------- */
+	addis	r3,0,0x0
+        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+        mtctr   r3
+..spinlp:
+        bdnz    ..spinlp                /* spin loop */
+
+        /*----------------------------------------------------------------------- */
+        /* Memory Bank 0 (Flash and SRAM) initialization */
+        /*----------------------------------------------------------------------- */
+        addi    r4,0,pb0ap
+        mtdcr   ebccfga,r4
+        addis   r4,0,0x9B01
+        ori     r4,r4,0x5480
+        mtdcr   ebccfgd,r4
+
+        addi    r4,0,pb0cr
+        mtdcr   ebccfga,r4
+        addis   r4,0,0xFFF1           /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
+        ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
+        mtdcr   ebccfgd,r4
+
+        blr
+
+
+/*----------------------------------------------------------------------------- */
+/* Function:     sdram_init */
+/* Description:  Dummy implementation here - done in C later */
+/*----------------------------------------------------------------------------- */
+        .globl  sdram_init
+sdram_init:
+        blr
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
new file mode 100644
index 00000000000..93ab10f3af1
--- /dev/null
+++ b/common/cmd_boot.c
@@ -0,0 +1,1103 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Boot support
+ */
+#include <common.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <cmd_autoscript.h>
+#include <s_record.h>
+#include <net.h>
+#include <syscall.h>
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
+static ulong load_serial (ulong offset);
+static int read_record (char *buf, ulong len);
+# if (CONFIG_COMMANDS & CFG_CMD_SAVES)
+static int save_serial (ulong offset, ulong size);
+static int write_record (char *buf);
+# endif /* CFG_CMD_SAVES */
+
+static int do_echo = 1;
+#endif /* CFG_CMD_LOADS */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_BDI)
+static void print_num(const char *, ulong);
+
+#ifndef CONFIG_ARM	/* PowerPC and other */
+
+static void print_str(const char *, const char *);
+
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int i;
+	bd_t *bd = gd->bd;
+	char buf[32];
+
+#ifdef DEBUG
+	print_num ("bd address",    (ulong)bd		);
+#endif
+	print_num ("memstart",	    bd->bi_memstart	);
+	print_num ("memsize",	    bd->bi_memsize	);
+	print_num ("flashstart",    bd->bi_flashstart	);
+	print_num ("flashsize",	    bd->bi_flashsize	);
+	print_num ("flashoffset",   bd->bi_flashoffset	);
+	print_num ("sramstart",	    bd->bi_sramstart	);
+	print_num ("sramsize",	    bd->bi_sramsize	);
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
+	print_num ("immr_base",	    bd->bi_immr_base	);
+#endif
+	print_num ("bootflags",	    bd->bi_bootflags	);
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
+	print_str ("procfreq",	    strmhz(buf, bd->bi_procfreq));
+	print_str ("plb_busfreq",	    strmhz(buf, bd->bi_plb_busfreq));
+#if defined(CONFIG_405GP)
+	print_str ("pci_busfreq",	    strmhz(buf, bd->bi_pci_busfreq));
+#endif
+#else
+#if defined(CONFIG_8260)
+	print_str ("vco",	    strmhz(buf, bd->bi_vco));
+	print_str ("sccfreq",	    strmhz(buf, bd->bi_sccfreq));
+	print_str ("brgfreq",	    strmhz(buf, bd->bi_brgfreq));
+#endif
+	print_str ("intfreq",	    strmhz(buf, bd->bi_intfreq));
+#if defined(CONFIG_8260)
+	print_str ("cpmfreq",	    strmhz(buf, bd->bi_cpmfreq));
+#endif
+	print_str ("busfreq",	    strmhz(buf, bd->bi_busfreq));
+#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
+	printf ("ethaddr     =");
+	for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+	}
+#ifdef CONFIG_PN62
+	printf ("\neth1addr    =");
+	for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enet1addr[i]);
+	}
+#endif /* CONFIG_PN62 */
+#ifdef CONFIG_HERMES
+	print_str ("ethspeed",	    strmhz(buf, bd->bi_ethspeed));
+#endif
+	printf ("\nIP addr     = ");	print_IPaddr (bd->bi_ip_addr);
+	printf ("\nbaudrate    = %6ld bps\n", bd->bi_baudrate   );
+	return 0;
+}
+
+#else	/* ARM */
+
+int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int i;
+	bd_t *bd = gd->bd;
+
+	print_num ("arch_number",	bd->bi_arch_number);
+	print_num ("env_t",		(ulong)bd->bi_env);
+	print_num ("boot_params",	(ulong)bd->bi_boot_params);
+
+	for (i=0; i<CONFIG_NR_DRAM_BANKS; ++i) {
+		printf ("DRAM:%02d.start = %08lX\n",
+			i, bd->bi_dram[i].start);
+		printf ("DRAM:%02d.size  = %08lX\n",
+			i, bd->bi_dram[i].size);
+	}
+
+	printf ("ethaddr     =");
+	for (i=0; i<6; ++i) {
+		printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
+	}
+	printf ("\n"
+		"ip_addr       = ");
+	print_IPaddr (bd->bi_ip_addr);
+	printf ("\n"
+		"baudrate      = %d bps\n", bd->bi_baudrate);
+
+	return 0;
+}
+
+#endif /* CONFIG_ARM XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+
+static void print_num(const char *name, ulong value)
+{
+	printf ("%-12s= 0x%08lX\n", name, value);
+}
+
+#ifndef	CONFIG_ARM
+static void print_str(const char *name, const char *str)
+{
+	printf ("%-12s= %6s MHz\n", name, str);
+}
+#endif	/* CONFIG_ARM */
+
+#endif	/* CFG_CMD_BDI */
+
+int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong	addr, rc;
+	int     rcode = 0;
+
+	if (argc < 2) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+
+	printf ("## Starting application at 0x%08lx ...\n", addr);
+
+	/*
+	 * pass address parameter as argv[0] (aka command name),
+	 * and all remaining args
+	 */
+	rc = ((ulong (*)(int, char *[]))addr) (--argc, &argv[1]);
+	if (rc != 0) rcode = 1;
+
+	printf ("## Application terminated, rc = 0x%lx\n", rc);
+	return rcode;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
+int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong offset = 0;
+	ulong addr;
+	int i;
+	char *env_echo;
+	int rcode = 0;
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	DECLARE_GLOBAL_DATA_PTR;
+	int load_baudrate, current_baudrate;
+
+	load_baudrate = current_baudrate = gd->baudrate;
+#endif
+
+	if (((env_echo = getenv("loads_echo")) != NULL) && (*env_echo == '1')) {
+		do_echo = 1;
+	} else {
+		do_echo = 0;
+	}
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (argc >= 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+	if (argc == 3) {
+		load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
+
+		/* default to current baudrate */
+		if (load_baudrate == 0)
+			load_baudrate = current_baudrate;
+	}
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+	if (argc == 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+			load_baudrate);
+		udelay(50000);
+		gd->baudrate = load_baudrate;
+		serial_setbrg ();
+		udelay(50000);
+		for (;;) {
+			if (getc() == '\r')
+				break;
+		}
+	}
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+	printf ("## Ready for S-Record download ...\n");
+
+	addr = load_serial (offset);
+
+	/*
+	 * Gather any trailing characters (for instance, the ^D which
+	 * is sent by 'cu' after sending a file), and give the
+	 * box some time (100 * 1 ms)
+	 */
+	for (i=0; i<100; ++i) {
+		if (serial_tstc()) {
+			(void) serial_getc();
+		}
+		udelay(1000);
+	}
+
+	if (addr == ~0) {
+		printf ("## S-Record download aborted\n");
+		rcode = 1;
+	} else {
+		printf ("## Start Addr      = 0x%08lx\n", addr);
+		load_addr = addr;
+	}
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+			current_baudrate);
+		udelay (50000);
+		gd->baudrate = current_baudrate;
+		serial_setbrg ();
+		udelay (50000);
+		for (;;) {
+			if (getc() == 0x1B) /* ESC */
+				break;
+		}
+	}
+#endif
+	return rcode;
+}
+
+static ulong
+load_serial (ulong offset)
+{
+	char	record[SREC_MAXRECLEN + 1];	/* buffer for one S-Record	*/
+	char	binbuf[SREC_MAXBINLEN];		/* buffer for binary data	*/
+	int	binlen;				/* no. of data bytes in S-Rec.	*/
+	int	type;				/* return code for record type	*/
+	ulong	addr;				/* load address from S-Record	*/
+	ulong	size;				/* number of bytes transferred	*/
+	char	buf[32];
+	ulong	store_addr;
+	ulong	start_addr = ~0;
+	ulong	end_addr   =  0;
+	int	line_count =  0;
+
+	while (read_record(record, SREC_MAXRECLEN + 1) >= 0) {
+		type = srec_decode (record, &binlen, &addr, binbuf);
+
+		if (type < 0) {
+			return (~0);		/* Invalid S-Record		*/
+		}
+
+		switch (type) {
+		case SREC_DATA2:
+		case SREC_DATA3:
+		case SREC_DATA4:
+		    store_addr = addr + offset;
+		    if (addr2info(store_addr)) {
+			int rc;
+
+			rc = flash_write((uchar *)binbuf,store_addr,binlen);
+			if (rc != 0) {
+				flash_perror (rc);
+				return (~0);
+			}
+		    } else {
+			memcpy ((char *)(store_addr), binbuf, binlen);
+		    }
+		    if ((store_addr) < start_addr)
+		    	start_addr = store_addr;
+		    if ((store_addr + binlen - 1) > end_addr)
+		    	end_addr = store_addr + binlen - 1;
+		    break;
+		case SREC_END2:
+		case SREC_END3:
+		case SREC_END4:
+		    udelay (10000);
+		    size = end_addr - start_addr + 1;
+		    printf ("\n"
+			    "## First Load Addr = 0x%08lX\n"
+			    "## Last  Load Addr = 0x%08lX\n"
+			    "## Total Size      = 0x%08lX = %ld Bytes\n",
+			    start_addr, end_addr, size, size
+		    );
+		    flush_cache (addr, size);
+		    sprintf(buf, "%lX", size);
+		    setenv("filesize", buf);
+		    return (addr);
+		case SREC_START:
+		    break;
+		default:
+		    break;
+		}
+		if (!do_echo) {	/* print a '.' every 100 lines */
+			if ((++line_count % 100) == 0)
+				putc ('.');
+		}
+	}
+
+	return (~0);			/* Download aborted		*/
+}
+
+static int
+read_record (char *buf, ulong len)
+{
+	char *p;
+	char c;
+
+	--len;	/* always leave room for terminating '\0' byte */
+
+	for (p=buf; p < buf+len; ++p) {
+		c = serial_getc();		/* read character		*/
+		if (do_echo)
+			serial_putc (c);	/* ... and echo it		*/
+
+		switch (c) {
+		case '\r':
+		case '\n':
+			*p = '\0';
+			return (p - buf);
+		case '\0':
+		case 0x03:			/* ^C - Control C		*/
+			return (-1);
+		default:
+			*p = c;
+		}
+
+	    /* Check for the console hangup (if any different from serial) */
+
+	    if (syscall_tbl[SYSCALL_GETC] != serial_getc) {
+		if (ctrlc()) {
+		    return (-1);
+		}
+	    }
+	}
+
+	/* line too long - truncate */
+	*p = '\0';
+	return (p - buf);
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_SAVES)
+
+int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	ulong offset = 0;
+	ulong size   = 0;
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	DECLARE_GLOBAL_DATA_PTR;
+	int save_baudrate, current_baudrate;
+
+	save_baudrate = current_baudrate = gd->baudrate;
+#endif
+
+	if (argc >= 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (argc >= 3) {
+		size = simple_strtoul(argv[2], NULL, 16);
+	}
+	if (argc == 4) {
+		save_baudrate = (int)simple_strtoul(argv[3], NULL, 10);
+
+		/* default to current baudrate */
+		if (save_baudrate == 0)
+			save_baudrate = current_baudrate;
+	}
+#else	/* ! CFG_LOADS_BAUD_CHANGE */
+	if (argc == 3) {
+		size = simple_strtoul(argv[2], NULL, 16);
+	}
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (save_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+			save_baudrate);
+		udelay(50000);
+		gd->baudrate = save_baudrate;
+		serial_setbrg ();
+		udelay(50000);
+		for (;;) {
+			if (getc() == '\r')
+				break;
+		}
+	}
+#endif	/* CFG_LOADS_BAUD_CHANGE */
+	printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
+	for (;;) {
+		if (getc() == '\r')
+			break;
+	}
+	if(save_serial (offset, size)) {
+		printf ("## S-Record upload aborted\n");
+	} else {
+		printf ("## S-Record upload complete\n");
+	}
+#ifdef	CFG_LOADS_BAUD_CHANGE
+	if (save_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+			(int)current_baudrate);
+		udelay (50000);
+		gd->baudrate = current_baudrate;
+		serial_setbrg ();
+		udelay (50000);
+		for (;;) {
+			if (getc() == 0x1B) /* ESC */
+				break;
+		}
+	}
+#endif
+	return 0;
+}
+
+#define SREC3_START				"S0030000FC\n"
+#define SREC3_FORMAT			"S3%02X%08lX%s%02X\n"
+#define SREC3_END				"S70500000000FA\n"
+#define SREC_BYTES_PER_RECORD	16
+
+static int save_serial (ulong address, ulong count)
+{
+	int i, c, reclen, checksum, length;
+	char *hex = "0123456789ABCDEF";
+	char	record[2*SREC_BYTES_PER_RECORD+16];	/* buffer for one S-Record	*/
+	char	data[2*SREC_BYTES_PER_RECORD+1];	/* buffer for hex data	*/
+
+	reclen = 0;
+	checksum  = 0;
+
+	if(write_record(SREC3_START))			/* write the header */
+		return (-1);
+	do {
+		if(count) {						/* collect hex data in the buffer  */
+			c = *(volatile uchar*)(address + reclen);	/* get one byte    */
+			checksum += c;							/* accumulate checksum */
+			data[2*reclen]   = hex[(c>>4)&0x0f];
+			data[2*reclen+1] = hex[c & 0x0f];
+			data[2*reclen+2] = '\0';
+			++reclen;
+			--count;
+		}
+		if(reclen == SREC_BYTES_PER_RECORD || count == 0) {
+			/* enough data collected for one record: dump it */
+			if(reclen) {	/* build & write a data record: */
+				/* address + data + checksum */
+				length = 4 + reclen + 1;
+
+				/* accumulate length bytes into checksum */
+				for(i = 0; i < 2; i++)
+					checksum += (length >> (8*i)) & 0xff;
+
+				/* accumulate address bytes into checksum: */
+				for(i = 0; i < 4; i++)
+					checksum += (address >> (8*i)) & 0xff;
+
+				/* make proper checksum byte: */
+				checksum = ~checksum & 0xff;
+
+				/* output one record: */
+				sprintf(record, SREC3_FORMAT, length, address, data, checksum);
+				if(write_record(record))
+					return (-1);
+			}
+			address  += reclen;  /* increment address */
+			checksum  = 0;
+			reclen    = 0;
+		}
+	}
+	while(count);
+	if(write_record(SREC3_END))	/* write the final record */
+		return (-1);
+	return(0);
+}
+
+static int
+write_record (char *buf)
+{
+	char c;
+
+	while((c = *buf++))
+		serial_putc(c);
+
+	/* Check for the console hangup (if any different from serial) */
+
+	if (ctrlc()) {
+	    return (-1);
+	}
+	return (0);
+}
+# endif /* CFG_CMD_SAVES */
+
+#endif	/* CFG_CMD_LOADS */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_LOADB)  /* loadb command (load binary) included */
+
+#define XON_CHAR        17
+#define XOFF_CHAR       19
+#define START_CHAR      0x01
+#define END_CHAR        0x0D
+#define SPACE           0x20
+#define K_ESCAPE        0x23
+#define SEND_TYPE       'S'
+#define DATA_TYPE       'D'
+#define ACK_TYPE        'Y'
+#define NACK_TYPE       'N'
+#define BREAK_TYPE      'B'
+#define tochar(x) ((char) (((x) + SPACE) & 0xff))
+#define untochar(x) ((int) (((x) - SPACE) & 0xff))
+
+extern int os_data_count;
+extern int os_data_header[8];
+
+static void set_kerm_bin_mode(unsigned long *);
+static int k_recv(void);
+static ulong load_serial_bin (ulong offset);
+
+
+char his_eol;        /* character he needs at end of packet */
+int  his_pad_count;  /* number of pad chars he needs */
+char his_pad_char;   /* pad chars he needs */
+char his_quote;      /* quote chars he'll use */
+
+int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	ulong offset = 0;
+	ulong addr;
+	int i;
+	int load_baudrate, current_baudrate;
+	int rcode = 0;
+
+	load_baudrate = current_baudrate = gd->baudrate;
+
+	if (argc >= 2) {
+		offset = simple_strtoul(argv[1], NULL, 16);
+	}
+	if (argc == 3) {
+		load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
+
+		/* default to current baudrate */
+		if (load_baudrate == 0)
+			load_baudrate = current_baudrate;
+	}
+
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+			load_baudrate);
+		udelay(50000);
+		gd->baudrate = load_baudrate;
+		serial_setbrg ();
+		udelay(50000);
+		for (;;) {
+			if (getc() == '\r')
+				break;
+		}
+	}
+	printf ("## Ready for binary (kermit) download ...\n");
+
+	addr = load_serial_bin (offset);
+
+	/*
+	 * Gather any trailing characters (for instance, the ^D which
+	 * is sent by 'cu' after sending a file), and give the
+	 * box some time (100 * 1 ms)
+	 */
+	for (i=0; i<100; ++i) {
+		if (serial_tstc()) {
+			(void) serial_getc();
+		}
+		udelay(1000);
+	}
+
+	if (addr == ~0) {
+		load_addr = 0;
+		printf ("## Binary (kermit) download aborted\n");
+		rcode = 1;
+	} else {
+		printf ("## Start Addr      = 0x%08lx\n", addr);
+		load_addr = addr;
+	}
+
+	if (load_baudrate != current_baudrate) {
+		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+			current_baudrate);
+		udelay (50000);
+		gd->baudrate = current_baudrate;
+		serial_setbrg ();
+		udelay (50000);
+		for (;;) {
+			if (getc() == 0x1B) /* ESC */
+				break;
+		}
+	}
+
+#ifdef CONFIG_AUTOSCRIPT
+	if (load_addr) {
+		char *s;
+
+		if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) {
+			printf("Running autoscript at addr 0x%08lX ...\n", load_addr);
+			rcode = autoscript (load_addr);
+		}
+	}
+#endif
+	return rcode;
+}
+
+
+static ulong load_serial_bin (ulong offset)
+{
+	int size;
+	char buf[32];
+
+	set_kerm_bin_mode ((ulong *) offset);
+	size = k_recv ();
+	flush_cache (offset, size);
+
+	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
+	sprintf(buf, "%X", size);
+	setenv("filesize", buf);
+
+	return offset;
+}
+
+void send_pad (void)
+{
+	int count = his_pad_count;
+
+	while (count-- > 0)
+		serial_putc (his_pad_char);
+}
+
+/* converts escaped kermit char to binary char */
+char ktrans (char in)
+{
+	if ((in & 0x60) == 0x40) {
+		return (char) (in & ~0x40);
+	} else if ((in & 0x7f) == 0x3f) {
+		return (char) (in | 0x40);
+	} else
+		return in;
+}
+
+int chk1 (char *buffer)
+{
+	int total = 0;
+
+	while (*buffer) {
+		total += *buffer++;
+	}
+	return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
+}
+
+void s1_sendpacket (char *packet)
+{
+	send_pad ();
+	while (*packet) {
+		serial_putc (*packet++);
+	}
+}
+
+static char a_b[24];
+void send_ack (int n)
+{
+	a_b[0] = START_CHAR;
+	a_b[1] = tochar (3);
+	a_b[2] = tochar (n);
+	a_b[3] = ACK_TYPE;
+	a_b[4] = '\0';
+	a_b[4] = tochar (chk1 (&a_b[1]));
+	a_b[5] = his_eol;
+	a_b[6] = '\0';
+	s1_sendpacket (a_b);
+}
+
+void send_nack (int n)
+{
+	a_b[0] = START_CHAR;
+	a_b[1] = tochar (3);
+	a_b[2] = tochar (n);
+	a_b[3] = NACK_TYPE;
+	a_b[4] = '\0';
+	a_b[4] = tochar (chk1 (&a_b[1]));
+	a_b[5] = his_eol;
+	a_b[6] = '\0';
+	s1_sendpacket (a_b);
+}
+
+
+
+/* os_data_* takes an OS Open image and puts it into memory, and
+   puts the boot header in an array named os_data_header
+
+   if image is binary, no header is stored in os_data_header.
+*/
+void (*os_data_init) (void);
+void (*os_data_char) (char new_char);
+static int os_data_state, os_data_state_saved;
+int os_data_count;
+static int os_data_count_saved;
+static char *os_data_addr, *os_data_addr_saved;
+static char *bin_start_address;
+int os_data_header[8];
+static void bin_data_init (void)
+{
+	os_data_state = 0;
+	os_data_count = 0;
+	os_data_addr = bin_start_address;
+}
+static void os_data_save (void)
+{
+	os_data_state_saved = os_data_state;
+	os_data_count_saved = os_data_count;
+	os_data_addr_saved = os_data_addr;
+}
+static void os_data_restore (void)
+{
+	os_data_state = os_data_state_saved;
+	os_data_count = os_data_count_saved;
+	os_data_addr = os_data_addr_saved;
+}
+static void bin_data_char (char new_char)
+{
+	switch (os_data_state) {
+	case 0:					/* data */
+		*os_data_addr++ = new_char;
+		--os_data_count;
+		break;
+	}
+}
+static void set_kerm_bin_mode (unsigned long *addr)
+{
+	bin_start_address = (char *) addr;
+	os_data_init = bin_data_init;
+	os_data_char = bin_data_char;
+}
+
+
+/* k_data_* simply handles the kermit escape translations */
+static int k_data_escape, k_data_escape_saved;
+void k_data_init (void)
+{
+	k_data_escape = 0;
+	os_data_init ();
+}
+void k_data_save (void)
+{
+	k_data_escape_saved = k_data_escape;
+	os_data_save ();
+}
+void k_data_restore (void)
+{
+	k_data_escape = k_data_escape_saved;
+	os_data_restore ();
+}
+void k_data_char (char new_char)
+{
+	if (k_data_escape) {
+		/* last char was escape - translate this character */
+		os_data_char (ktrans (new_char));
+		k_data_escape = 0;
+	} else {
+		if (new_char == his_quote) {
+			/* this char is escape - remember */
+			k_data_escape = 1;
+		} else {
+			/* otherwise send this char as-is */
+			os_data_char (new_char);
+		}
+	}
+}
+
+#define SEND_DATA_SIZE  20
+char send_parms[SEND_DATA_SIZE];
+char *send_ptr;
+
+/* handle_send_packet interprits the protocol info and builds and
+   sends an appropriate ack for what we can do */
+void handle_send_packet (int n)
+{
+	int length = 3;
+	int bytes;
+
+	/* initialize some protocol parameters */
+	his_eol = END_CHAR;		/* default end of line character */
+	his_pad_count = 0;
+	his_pad_char = '\0';
+	his_quote = K_ESCAPE;
+
+	/* ignore last character if it filled the buffer */
+	if (send_ptr == &send_parms[SEND_DATA_SIZE - 1])
+		--send_ptr;
+	bytes = send_ptr - send_parms;	/* how many bytes we'll process */
+	do {
+		if (bytes-- <= 0)
+			break;
+		/* handle MAXL - max length */
+		/* ignore what he says - most I'll take (here) is 94 */
+		a_b[++length] = tochar (94);
+		if (bytes-- <= 0)
+			break;
+		/* handle TIME - time you should wait for my packets */
+		/* ignore what he says - don't wait for my ack longer than 1 second */
+		a_b[++length] = tochar (1);
+		if (bytes-- <= 0)
+			break;
+		/* handle NPAD - number of pad chars I need */
+		/* remember what he says - I need none */
+		his_pad_count = untochar (send_parms[2]);
+		a_b[++length] = tochar (0);
+		if (bytes-- <= 0)
+			break;
+		/* handle PADC - pad chars I need */
+		/* remember what he says - I need none */
+		his_pad_char = ktrans (send_parms[3]);
+		a_b[++length] = 0x40;	/* He should ignore this */
+		if (bytes-- <= 0)
+			break;
+		/* handle EOL - end of line he needs */
+		/* remember what he says - I need CR */
+		his_eol = untochar (send_parms[4]);
+		a_b[++length] = tochar (END_CHAR);
+		if (bytes-- <= 0)
+			break;
+		/* handle QCTL - quote control char he'll use */
+		/* remember what he says - I'll use '#' */
+		his_quote = send_parms[5];
+		a_b[++length] = '#';
+		if (bytes-- <= 0)
+			break;
+		/* handle QBIN - 8-th bit prefixing */
+		/* ignore what he says - I refuse */
+		a_b[++length] = 'N';
+		if (bytes-- <= 0)
+			break;
+		/* handle CHKT - the clock check type */
+		/* ignore what he says - I do type 1 (for now) */
+		a_b[++length] = '1';
+		if (bytes-- <= 0)
+			break;
+		/* handle REPT - the repeat prefix */
+		/* ignore what he says - I refuse (for now) */
+		a_b[++length] = 'N';
+		if (bytes-- <= 0)
+			break;
+		/* handle CAPAS - the capabilities mask */
+		/* ignore what he says - I only do long packets - I don't do windows */
+		a_b[++length] = tochar (2);	/* only long packets */
+		a_b[++length] = tochar (0);	/* no windows */
+		a_b[++length] = tochar (94);	/* large packet msb */
+		a_b[++length] = tochar (94);	/* large packet lsb */
+	} while (0);
+
+	a_b[0] = START_CHAR;
+	a_b[1] = tochar (length);
+	a_b[2] = tochar (n);
+	a_b[3] = ACK_TYPE;
+	a_b[++length] = '\0';
+	a_b[length] = tochar (chk1 (&a_b[1]));
+	a_b[++length] = his_eol;
+	a_b[++length] = '\0';
+	s1_sendpacket (a_b);
+}
+
+/* k_recv receives a OS Open image file over kermit line */
+static int k_recv (void)
+{
+	char new_char;
+	char k_state, k_state_saved;
+	int sum;
+	int done;
+	int length;
+	int n, last_n;
+	int z = 0;
+	int len_lo, len_hi;
+
+	/* initialize some protocol parameters */
+	his_eol = END_CHAR;		/* default end of line character */
+	his_pad_count = 0;
+	his_pad_char = '\0';
+	his_quote = K_ESCAPE;
+
+	/* initialize the k_recv and k_data state machine */
+	done = 0;
+	k_state = 0;
+	k_data_init ();
+	k_state_saved = k_state;
+	k_data_save ();
+	n = 0;				/* just to get rid of a warning */
+	last_n = -1;
+
+	/* expect this "type" sequence (but don't check):
+	   S: send initiate
+	   F: file header
+	   D: data (multiple)
+	   Z: end of file
+	   B: break transmission
+	 */
+
+	/* enter main loop */
+	while (!done) {
+		/* set the send packet pointer to begining of send packet parms */
+		send_ptr = send_parms;
+
+		/* With each packet, start summing the bytes starting with the length.
+		   Save the current sequence number.
+		   Note the type of the packet.
+		   If a character less than SPACE (0x20) is received - error.
+		 */
+
+#if 0
+		/* OLD CODE, Prior to checking sequence numbers */
+		/* first have all state machines save current states */
+		k_state_saved = k_state;
+		k_data_save ();
+#endif
+
+		/* get a packet */
+		/* wait for the starting character */
+		while (serial_getc () != START_CHAR);
+		/* get length of packet */
+		sum = 0;
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		sum += new_char & 0xff;
+		length = untochar (new_char);
+		/* get sequence number */
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		sum += new_char & 0xff;
+		n = untochar (new_char);
+		--length;
+
+		/* NEW CODE - check sequence numbers for retried packets */
+		/* Note - this new code assumes that the sequence number is correctly
+		 * received.  Handling an invalid sequence number adds another layer
+		 * of complexity that may not be needed - yet!  At this time, I'm hoping
+		 * that I don't need to buffer the incoming data packets and can write
+		 * the data into memory in real time.
+		 */
+		if (n == last_n) {
+			/* same sequence number, restore the previous state */
+			k_state = k_state_saved;
+			k_data_restore ();
+		} else {
+			/* new sequence number, checkpoint the download */
+			last_n = n;
+			k_state_saved = k_state;
+			k_data_save ();
+		}
+		/* END NEW CODE */
+
+		/* get packet type */
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		sum += new_char & 0xff;
+		k_state = new_char;
+		--length;
+		/* check for extended length */
+		if (length == -2) {
+			/* (length byte was 0, decremented twice) */
+			/* get the two length bytes */
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			sum += new_char & 0xff;
+			len_hi = untochar (new_char);
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			sum += new_char & 0xff;
+			len_lo = untochar (new_char);
+			length = len_hi * 95 + len_lo;
+			/* check header checksum */
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+				goto packet_error;
+			sum += new_char & 0xff;
+/* --length; */ /* new length includes only data and block check to come */
+		}
+		/* bring in rest of packet */
+		while (length > 1) {
+			new_char = serial_getc ();
+			if ((new_char & 0xE0) == 0)
+				goto packet_error;
+			sum += new_char & 0xff;
+			--length;
+			if (k_state == DATA_TYPE) {
+				/* pass on the data if this is a data packet */
+				k_data_char (new_char);
+			} else if (k_state == SEND_TYPE) {
+				/* save send pack in buffer as is */
+				*send_ptr++ = new_char;
+				/* if too much data, back off the pointer */
+				if (send_ptr >= &send_parms[SEND_DATA_SIZE])
+					--send_ptr;
+			}
+		}
+		/* get and validate checksum character */
+		new_char = serial_getc ();
+		if ((new_char & 0xE0) == 0)
+			goto packet_error;
+		if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+			goto packet_error;
+		/* get END_CHAR */
+		new_char = serial_getc ();
+		if (new_char != END_CHAR) {
+		  packet_error:
+			/* restore state machines */
+			k_state = k_state_saved;
+			k_data_restore ();
+			/* send a negative acknowledge packet in */
+			send_nack (n);
+		} else if (k_state == SEND_TYPE) {
+			/* crack the protocol parms, build an appropriate ack packet */
+			handle_send_packet (n);
+		} else {
+			/* send simple acknowledge packet in */
+			send_ack (n);
+			/* quit if end of transmission */
+			if (k_state == BREAK_TYPE)
+				done = 1;
+		}
+		++z;
+	}
+	return ((ulong) os_data_addr - (ulong) bin_start_address);
+}
+#endif	/* CFG_CMD_LOADB */
+#if (CONFIG_COMMANDS & CFG_CMD_HWFLOW)
+int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	extern int hwflow_onoff(int);
+
+	if (argc == 2) {
+		if (strcmp(argv[1], "off") == 0)
+			hwflow_onoff(-1);
+		else
+			if (strcmp(argv[1], "on") == 0)
+				hwflow_onoff(1);
+			else
+				printf("Usage: %s\n", cmdtp->usage);
+	}
+	printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off");
+	return 0;
+}
+#endif /* CFG_CMD_HWFLOW */
diff --git a/common/hush.c b/common/hush.c
new file mode 100644
index 00000000000..3cb6fc3b1cb
--- /dev/null
+++ b/common/hush.c
@@ -0,0 +1,3461 @@
+/* vi: set sw=4 ts=4: */
+/*
+ * sh.c -- a prototype Bourne shell grammar parser
+ *      Intended to follow the original Thompson and Ritchie
+ *      "small and simple is beautiful" philosophy, which
+ *      incidentally is a good match to today's BusyBox.
+ *
+ * Copyright (C) 2000,2001  Larry Doolittle  <larry@doolittle.boa.org>
+ *
+ * Credits:
+ *      The parser routines proper are all original material, first
+ *      written Dec 2000 and Jan 2001 by Larry Doolittle.
+ *      The execution engine, the builtins, and much of the underlying
+ *      support has been adapted from busybox-0.49pre's lash,
+ *      which is Copyright (C) 2000 by Lineo, Inc., and
+ *      written by Erik Andersen <andersen@lineo.com>, <andersee@debian.org>.
+ *      That, in turn, is based in part on ladsh.c, by Michael K. Johnson and
+ *      Erik W. Troan, which they placed in the public domain.  I don't know
+ *      how much of the Johnson/Troan code has survived the repeated rewrites.
+ * Other credits:
+ *      simple_itoa() was lifted from boa-0.93.15
+ *      b_addchr() derived from similar w_addchar function in glibc-2.2
+ *      setup_redirect(), redirect_opt_num(), and big chunks of main()
+ *        and many builtins derived from contributions by Erik Andersen
+ *      miscellaneous bugfixes from Matt Kraai
+ *
+ * There are two big (and related) architecture differences between
+ * this parser and the lash parser.  One is that this version is
+ * actually designed from the ground up to understand nearly all
+ * of the Bourne grammar.  The second, consequential change is that
+ * the parser and input reader have been turned inside out.  Now,
+ * the parser is in control, and asks for input as needed.  The old
+ * way had the input reader in control, and it asked for parsing to
+ * take place as needed.  The new way makes it much easier to properly
+ * handle the recursion implicit in the various substitutions, especially
+ * across continuation lines.
+ *
+ * Bash grammar not implemented: (how many of these were in original sh?)
+ *      $@ (those sure look like weird quoting rules)
+ *      $_
+ *      ! negation operator for pipes
+ *      &> and >& redirection of stdout+stderr
+ *      Brace Expansion
+ *      Tilde Expansion
+ *      fancy forms of Parameter Expansion
+ *      aliases
+ *      Arithmetic Expansion
+ *      <(list) and >(list) Process Substitution
+ *      reserved words: case, esac, select, function
+ *      Here Documents ( << word )
+ *      Functions
+ * Major bugs:
+ *      job handling woefully incomplete and buggy
+ *      reserved word execution woefully incomplete and buggy
+ * to-do:
+ *      port selected bugfixes from post-0.49 busybox lash - done?
+ *      finish implementing reserved words: for, while, until, do, done
+ *      change { and } from special chars to reserved words
+ *      builtins: break, continue, eval, return, set, trap, ulimit
+ *      test magic exec
+ *      handle children going into background
+ *      clean up recognition of null pipes
+ *      check setting of global_argc and global_argv
+ *      control-C handling, probably with longjmp
+ *      follow IFS rules more precisely, including update semantics
+ *      figure out what to do with backslash-newline
+ *      explain why we use signal instead of sigaction
+ *      propagate syntax errors, die on resource errors?
+ *      continuation lines, both explicit and implicit - done?
+ *      memory leak finding and plugging - done?
+ *      more testing, especially quoting rules and redirection
+ *      document how quoting rules not precisely followed for variable assignments
+ *      maybe change map[] to use 2-bit entries
+ *      (eventually) remove all the printf's
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define __U_BOOT__
+#ifdef __U_BOOT__
+#include <malloc.h>         /* malloc, free, realloc*/
+#include <linux/ctype.h>    /* isalpha, isdigit */
+#include <common.h>        /* readline */
+#include <hush.h>
+#include <command.h>        /* find_cmd */
+#include <cmd_bootm.h>      /* do_bootd */
+#endif
+#ifdef CFG_HUSH_PARSER
+#ifndef __U_BOOT__
+#include <ctype.h>     /* isalpha, isdigit */
+#include <unistd.h>    /* getpid */
+#include <stdlib.h>    /* getenv, atoi */
+#include <string.h>    /* strchr */
+#include <stdio.h>     /* popen etc. */
+#include <glob.h>      /* glob, of course */
+#include <stdarg.h>    /* va_list */
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>    /* should be pretty obvious */
+
+#include <sys/stat.h>  /* ulimit */
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <signal.h>
+
+/* #include <dmalloc.h> */
+/* #define DEBUG_SHELL */
+
+#ifdef BB_VER
+#include "busybox.h"
+#include "cmdedit.h"
+#else
+#define applet_name "hush"
+#include "standalone.h"
+#define hush_main main
+#undef BB_FEATURE_SH_FANCY_PROMPT
+#endif
+#endif
+#define SPECIAL_VAR_SYMBOL 03
+#ifndef __U_BOOT__
+#define FLAG_EXIT_FROM_LOOP 1
+#define FLAG_PARSE_SEMICOLON (1 << 1)		/* symbol ';' is special for parser */
+#define FLAG_REPARSING       (1 << 2)		/* >= 2nd pass */
+
+#endif
+
+#ifdef __U_BOOT__
+#define EXIT_SUCCESS 0
+#define EOF -1
+#define syntax() syntax_err()
+#define xstrdup strdup
+#define error_msg printf
+#else
+typedef enum {
+	REDIRECT_INPUT     = 1,
+	REDIRECT_OVERWRITE = 2,
+	REDIRECT_APPEND    = 3,
+	REDIRECT_HEREIS    = 4,
+	REDIRECT_IO        = 5
+} redir_type;
+
+/* The descrip member of this structure is only used to make debugging
+ * output pretty */
+struct {int mode; int default_fd; char *descrip;} redir_table[] = {
+	{ 0,                         0, "()" },
+	{ O_RDONLY,                  0, "<"  },
+	{ O_CREAT|O_TRUNC|O_WRONLY,  1, ">"  },
+	{ O_CREAT|O_APPEND|O_WRONLY, 1, ">>" },
+	{ O_RDONLY,                 -1, "<<" },
+	{ O_RDWR,                    1, "<>" }
+};
+#endif
+
+typedef enum {
+	PIPE_SEQ = 1,
+	PIPE_AND = 2,
+	PIPE_OR  = 3,
+	PIPE_BG  = 4,
+} pipe_style;
+
+/* might eventually control execution */
+typedef enum {
+	RES_NONE  = 0,
+	RES_IF    = 1,
+	RES_THEN  = 2,
+	RES_ELIF  = 3,
+	RES_ELSE  = 4,
+	RES_FI    = 5,
+	RES_FOR   = 6,
+	RES_WHILE = 7,
+	RES_UNTIL = 8,
+	RES_DO    = 9,
+	RES_DONE  = 10,
+	RES_XXXX  = 11,
+	RES_IN    = 12,
+	RES_SNTX  = 13
+} reserved_style;
+#define FLAG_END   (1<<RES_NONE)
+#define FLAG_IF    (1<<RES_IF)
+#define FLAG_THEN  (1<<RES_THEN)
+#define FLAG_ELIF  (1<<RES_ELIF)
+#define FLAG_ELSE  (1<<RES_ELSE)
+#define FLAG_FI    (1<<RES_FI)
+#define FLAG_FOR   (1<<RES_FOR)
+#define FLAG_WHILE (1<<RES_WHILE)
+#define FLAG_UNTIL (1<<RES_UNTIL)
+#define FLAG_DO    (1<<RES_DO)
+#define FLAG_DONE  (1<<RES_DONE)
+#define FLAG_IN    (1<<RES_IN)
+#define FLAG_START (1<<RES_XXXX)
+
+/* This holds pointers to the various results of parsing */
+struct p_context {
+	struct child_prog *child;
+	struct pipe *list_head;
+	struct pipe *pipe;
+#ifndef __U_BOOT__
+	struct redir_struct *pending_redirect;
+#endif
+	reserved_style w;
+	int old_flag;				/* for figuring out valid reserved words */
+	struct p_context *stack;
+	int type;			/* define type of parser : ";$" common or special symbol */
+	/* How about quoting status? */
+};
+
+#ifndef __U_BOOT__
+struct redir_struct {
+	redir_type type;			/* type of redirection */
+	int fd;						/* file descriptor being redirected */
+	int dup;					/* -1, or file descriptor being duplicated */
+	struct redir_struct *next;	/* pointer to the next redirect in the list */
+	glob_t word;				/* *word.gl_pathv is the filename */
+};
+#endif
+
+struct child_prog {
+#ifndef __U_BOOT__
+	pid_t pid;					/* 0 if exited */
+#endif
+	char **argv;				/* program name and arguments */
+#ifdef __U_BOOT__
+	int    argc;                            /* number of program arguments */
+#endif
+	struct pipe *group;			/* if non-NULL, first in group or subshell */
+#ifndef __U_BOOT__
+	int subshell;				/* flag, non-zero if group must be forked */
+	struct redir_struct *redirects;	/* I/O redirections */
+	glob_t glob_result;			/* result of parameter globbing */
+	int is_stopped;				/* is the program currently running? */
+	struct pipe *family;		/* pointer back to the child's parent pipe */
+#endif
+	int sp;				/* number of SPECIAL_VAR_SYMBOL */
+	int type;
+};
+
+struct pipe {
+#ifndef __U_BOOT__
+	int jobid;					/* job number */
+#endif
+	int num_progs;				/* total number of programs in job */
+#ifndef __U_BOOT__
+	int running_progs;			/* number of programs running */
+	char *text;					/* name of job */
+	char *cmdbuf;				/* buffer various argv's point into */
+	pid_t pgrp;					/* process group ID for the job */
+#endif
+	struct child_prog *progs;	/* array of commands in pipe */
+	struct pipe *next;			/* to track background commands */
+#ifndef __U_BOOT__
+	int stopped_progs;			/* number of programs alive, but stopped */
+	int job_context;			/* bitmask defining current context */
+#endif
+	pipe_style followup;		/* PIPE_BG, PIPE_SEQ, PIPE_OR, PIPE_AND */
+	reserved_style r_mode;		/* supports if, for, while, until */
+};
+
+#ifndef __U_BOOT__
+struct close_me {
+	int fd;
+	struct close_me *next;
+};
+#endif
+
+struct variables {
+	char *name;
+	char *value;
+	int flg_export;
+	int flg_read_only;
+	struct variables *next;
+};
+
+/* globals, connect us to the outside world
+ * the first three support $?, $#, and $1 */
+#ifndef __U_BOOT__
+char **global_argv;
+unsigned int global_argc;
+#endif
+unsigned int last_return_code;
+#ifndef __U_BOOT__
+extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
+#endif
+
+/* "globals" within this file */
+static char *ifs;
+static char map[256];
+#ifndef __U_BOOT__
+static int fake_mode;
+static int interactive;
+static struct close_me *close_me_head;
+static const char *cwd;
+static struct pipe *job_list;
+static unsigned int last_bg_pid;
+static unsigned int last_jobid;
+static unsigned int shell_terminal;
+static char *PS1;
+static char *PS2;
+struct variables shell_ver = { "HUSH_VERSION", "0.01", 1, 1, 0 };
+struct variables *top_vars = &shell_ver;
+#else
+static int flag_repeat = 0;
+static int do_repeat = 0;
+static struct variables *top_vars ;
+#endif /*__U_BOOT__ */
+
+#define B_CHUNK (100)
+#define B_NOSPAC 1
+
+typedef struct {
+	char *data;
+	int length;
+	int maxlen;
+	int quote;
+	int nonnull;
+} o_string;
+#define NULL_O_STRING {NULL,0,0,0,0}
+/* used for initialization:
+	o_string foo = NULL_O_STRING; */
+
+/* I can almost use ordinary FILE *.  Is open_memstream() universally
+ * available?  Where is it documented? */
+struct in_str {
+	const char *p;
+#ifndef __U_BOOT__
+	char peek_buf[2];
+#endif
+	int __promptme;
+	int promptmode;
+#ifndef __U_BOOT__
+	FILE *file;
+#endif
+	int (*get) (struct in_str *);
+	int (*peek) (struct in_str *);
+};
+#define b_getch(input) ((input)->get(input))
+#define b_peek(input) ((input)->peek(input))
+
+#ifndef __U_BOOT__
+#define JOB_STATUS_FORMAT "[%d] %-22s %.40s\n"
+
+struct built_in_command {
+	char *cmd;					/* name */
+	char *descr;				/* description */
+	int (*function) (struct child_prog *);	/* function ptr */
+};
+#endif
+
+/* belongs in busybox.h */
+static inline int max(int a, int b) {
+	return (a>b)?a:b;
+}
+
+/* This should be in utility.c */
+#ifdef DEBUG_SHELL
+#ifndef __U_BOOT__
+static void debug_printf(const char *format, ...)
+{
+	va_list args;
+	va_start(args, format);
+	vfprintf(stderr, format, args);
+	va_end(args);
+}
+#else
+#define debug_printf printf             /* U-Boot debug flag */
+#endif
+#else
+static inline void debug_printf(const char *format, ...) { }
+#endif
+#define final_printf debug_printf
+
+#ifdef __U_BOOT__
+static void syntax_err(void) {
+	 printf("syntax error\n");
+}
+#else
+static void __syntax(char *file, int line) {
+	error_msg("syntax error %s:%d", file, line);
+}
+#define syntax() __syntax(__FILE__, __LINE__)
+#endif
+
+#ifdef __U_BOOT__
+static void *xmalloc(size_t size);
+static void *xrealloc(void *ptr, size_t size);
+#else
+/* Index of subroutines: */
+/*   function prototypes for builtins */
+static int builtin_cd(struct child_prog *child);
+static int builtin_env(struct child_prog *child);
+static int builtin_eval(struct child_prog *child);
+static int builtin_exec(struct child_prog *child);
+static int builtin_exit(struct child_prog *child);
+static int builtin_export(struct child_prog *child);
+static int builtin_fg_bg(struct child_prog *child);
+static int builtin_help(struct child_prog *child);
+static int builtin_jobs(struct child_prog *child);
+static int builtin_pwd(struct child_prog *child);
+static int builtin_read(struct child_prog *child);
+static int builtin_set(struct child_prog *child);
+static int builtin_shift(struct child_prog *child);
+static int builtin_source(struct child_prog *child);
+static int builtin_umask(struct child_prog *child);
+static int builtin_unset(struct child_prog *child);
+static int builtin_not_written(struct child_prog *child);
+#endif
+/*   o_string manipulation: */
+static int b_check_space(o_string *o, int len);
+static int b_addchr(o_string *o, int ch);
+static void b_reset(o_string *o);
+static int b_addqchr(o_string *o, int ch, int quote);
+static int b_adduint(o_string *o, unsigned int i);
+/*  in_str manipulations: */
+static int static_get(struct in_str *i);
+static int static_peek(struct in_str *i);
+static int file_get(struct in_str *i);
+static int file_peek(struct in_str *i);
+#ifndef __U_BOOT__
+static void setup_file_in_str(struct in_str *i, FILE *f);
+#else
+static void setup_file_in_str(struct in_str *i);
+#endif
+static void setup_string_in_str(struct in_str *i, const char *s);
+#ifndef __U_BOOT__
+/*  close_me manipulations: */
+static void mark_open(int fd);
+static void mark_closed(int fd);
+static void close_all();
+#endif
+/*  "run" the final data structures: */
+static char *indenter(int i);
+static int free_pipe_list(struct pipe *head, int indent);
+static int free_pipe(struct pipe *pi, int indent);
+/*  really run the final data structures: */
+#ifndef __U_BOOT__
+static int setup_redirects(struct child_prog *prog, int squirrel[]);
+#endif
+static int run_list_real(struct pipe *pi);
+#ifndef __U_BOOT__
+static void pseudo_exec(struct child_prog *child) __attribute__ ((noreturn));
+#endif
+static int run_pipe_real(struct pipe *pi);
+/*   extended glob support: */
+#ifndef __U_BOOT__
+static int globhack(const char *src, int flags, glob_t *pglob);
+static int glob_needed(const char *s);
+static int xglob(o_string *dest, int flags, glob_t *pglob);
+#endif
+/*   variable assignment: */
+static int is_assignment(const char *s);
+/*   data structure manipulation: */
+#ifndef __U_BOOT__
+static int setup_redirect(struct p_context *ctx, int fd, redir_type style, struct in_str *input);
+#endif
+static void initialize_context(struct p_context *ctx);
+static int done_word(o_string *dest, struct p_context *ctx);
+static int done_command(struct p_context *ctx);
+static int done_pipe(struct p_context *ctx, pipe_style type);
+/*   primary string parsing: */
+#ifndef __U_BOOT__
+static int redirect_dup_num(struct in_str *input);
+static int redirect_opt_num(o_string *o);
+static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end);
+static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch);
+#endif
+static char *lookup_param(char *src);
+static char *make_string(char **inp);
+static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input);
+#ifndef __U_BOOT__
+static int parse_string(o_string *dest, struct p_context *ctx, const char *src);
+#endif
+static int parse_stream(o_string *dest, struct p_context *ctx, struct in_str *input0, int end_trigger);
+/*   setup: */
+static int parse_stream_outer(struct in_str *inp, int flag);
+#ifndef __U_BOOT__
+static int parse_string_outer(const char *s, int flag);
+static int parse_file_outer(FILE *f);
+#endif
+#ifndef __U_BOOT__
+/*   job management: */
+static int checkjobs(struct pipe* fg_pipe);
+static void insert_bg_job(struct pipe *pi);
+static void remove_bg_job(struct pipe *pi);
+#endif
+/*     local variable support */
+static char **make_list_in(char **inp, char *name);
+static char *insert_var_value(char *inp);
+static char *get_local_var(const char *var);
+#ifndef __U_BOOT__
+static void  unset_local_var(const char *name);
+#endif
+static int set_local_var(const char *s, int flg_export);
+
+#ifndef __U_BOOT__
+/* Table of built-in functions.  They can be forked or not, depending on
+ * context: within pipes, they fork.  As simple commands, they do not.
+ * When used in non-forking context, they can change global variables
+ * in the parent shell process.  If forked, of course they can not.
+ * For example, 'unset foo | whatever' will parse and run, but foo will
+ * still be set at the end. */
+static struct built_in_command bltins[] = {
+	{"bg", "Resume a job in the background", builtin_fg_bg},
+	{"break", "Exit for, while or until loop", builtin_not_written},
+	{"cd", "Change working directory", builtin_cd},
+	{"continue", "Continue for, while or until loop", builtin_not_written},
+	{"env", "Print all environment variables", builtin_env},
+	{"eval", "Construct and run shell command", builtin_eval},
+	{"exec", "Exec command, replacing this shell with the exec'd process",
+		builtin_exec},
+	{"exit", "Exit from shell()", builtin_exit},
+	{"export", "Set environment variable", builtin_export},
+	{"fg", "Bring job into the foreground", builtin_fg_bg},
+	{"jobs", "Lists the active jobs", builtin_jobs},
+	{"pwd", "Print current directory", builtin_pwd},
+	{"read", "Input environment variable", builtin_read},
+	{"return", "Return from a function", builtin_not_written},
+	{"set", "Set/unset shell local variables", builtin_set},
+	{"shift", "Shift positional parameters", builtin_shift},
+	{"trap", "Trap signals", builtin_not_written},
+	{"ulimit","Controls resource limits", builtin_not_written},
+	{"umask","Sets file creation mask", builtin_umask},
+	{"unset", "Unset environment variable", builtin_unset},
+	{".", "Source-in and run commands in a file", builtin_source},
+	{"help", "List shell built-in commands", builtin_help},
+	{NULL, NULL, NULL}
+};
+
+static const char *set_cwd(void)
+{
+	if(cwd==unknown)
+		cwd = NULL;     /* xgetcwd(arg) called free(arg) */
+	cwd = xgetcwd((char *)cwd);
+	if (!cwd)
+		cwd = unknown;
+	return cwd;
+}
+
+/* built-in 'eval' handler */
+static int builtin_eval(struct child_prog *child)
+{
+	char *str = NULL;
+	int rcode = EXIT_SUCCESS;
+
+	if (child->argv[1]) {
+		str = make_string(child->argv + 1);
+		parse_string_outer(str, FLAG_EXIT_FROM_LOOP |
+					FLAG_PARSE_SEMICOLON);
+		free(str);
+		rcode = last_return_code;
+	}
+	return rcode;
+}
+
+/* built-in 'cd <path>' handler */
+static int builtin_cd(struct child_prog *child)
+{
+	char *newdir;
+	if (child->argv[1] == NULL)
+		newdir = getenv("HOME");
+	else
+		newdir = child->argv[1];
+	if (chdir(newdir)) {
+		printf("cd: %s: %s\n", newdir, strerror(errno));
+		return EXIT_FAILURE;
+	}
+	set_cwd();
+	return EXIT_SUCCESS;
+}
+
+/* built-in 'env' handler */
+static int builtin_env(struct child_prog *dummy)
+{
+	char **e = environ;
+	if (e == NULL) return EXIT_FAILURE;
+	for (; *e; e++) {
+		puts(*e);
+	}
+	return EXIT_SUCCESS;
+}
+
+/* built-in 'exec' handler */
+static int builtin_exec(struct child_prog *child)
+{
+	if (child->argv[1] == NULL)
+		return EXIT_SUCCESS;   /* Really? */
+	child->argv++;
+	pseudo_exec(child);
+	/* never returns */
+}
+
+/* built-in 'exit' handler */
+static int builtin_exit(struct child_prog *child)
+{
+	if (child->argv[1] == NULL)
+		exit(last_return_code);
+	exit (atoi(child->argv[1]));
+}
+
+/* built-in 'export VAR=value' handler */
+static int builtin_export(struct child_prog *child)
+{
+	int res = 0;
+	char *name = child->argv[1];
+
+	if (name == NULL) {
+		return (builtin_env(child));
+	}
+
+	name = strdup(name);
+
+	if(name) {
+		char *value = strchr(name, '=');
+
+		if (!value) {
+			char *tmp;
+			/* They are exporting something without an =VALUE */
+
+			value = get_local_var(name);
+			if (value) {
+				size_t ln = strlen(name);
+
+				tmp = realloc(name, ln+strlen(value)+2);
+				if(tmp==NULL)
+					res = -1;
+				else {
+					sprintf(tmp+ln, "=%s", value);
+					name = tmp;
+				}
+			} else {
+				/* bash does not return an error when trying to export
+				 * an undefined variable.  Do likewise. */
+				res = 1;
+			}
+		}
+	}
+	if (res<0)
+		perror_msg("export");
+	else if(res==0)
+		res = set_local_var(name, 1);
+	else
+		res = 0;
+	free(name);
+	return res;
+}
+
+/* built-in 'fg' and 'bg' handler */
+static int builtin_fg_bg(struct child_prog *child)
+{
+	int i, jobnum;
+	struct pipe *pi=NULL;
+
+	if (!interactive)
+		return EXIT_FAILURE;
+	/* If they gave us no args, assume they want the last backgrounded task */
+	if (!child->argv[1]) {
+		for (pi = job_list; pi; pi = pi->next) {
+			if (pi->jobid == last_jobid) {
+				break;
+			}
+		}
+		if (!pi) {
+			error_msg("%s: no current job", child->argv[0]);
+			return EXIT_FAILURE;
+		}
+	} else {
+		if (sscanf(child->argv[1], "%%%d", &jobnum) != 1) {
+			error_msg("%s: bad argument '%s'", child->argv[0], child->argv[1]);
+			return EXIT_FAILURE;
+		}
+		for (pi = job_list; pi; pi = pi->next) {
+			if (pi->jobid == jobnum) {
+				break;
+			}
+		}
+		if (!pi) {
+			error_msg("%s: %d: no such job", child->argv[0], jobnum);
+			return EXIT_FAILURE;
+		}
+	}
+
+	if (*child->argv[0] == 'f') {
+		/* Put the job into the foreground.  */
+		tcsetpgrp(shell_terminal, pi->pgrp);
+	}
+
+	/* Restart the processes in the job */
+	for (i = 0; i < pi->num_progs; i++)
+		pi->progs[i].is_stopped = 0;
+
+	if ( (i=kill(- pi->pgrp, SIGCONT)) < 0) {
+		if (i == ESRCH) {
+			remove_bg_job(pi);
+		} else {
+			perror_msg("kill (SIGCONT)");
+		}
+	}
+
+	pi->stopped_progs = 0;
+	return EXIT_SUCCESS;
+}
+
+/* built-in 'help' handler */
+static int builtin_help(struct child_prog *dummy)
+{
+	struct built_in_command *x;
+
+	printf("\nBuilt-in commands:\n");
+	printf("-------------------\n");
+	for (x = bltins; x->cmd; x++) {
+		if (x->descr==NULL)
+			continue;
+		printf("%s\t%s\n", x->cmd, x->descr);
+	}
+	printf("\n\n");
+	return EXIT_SUCCESS;
+}
+
+/* built-in 'jobs' handler */
+static int builtin_jobs(struct child_prog *child)
+{
+	struct pipe *job;
+	char *status_string;
+
+	for (job = job_list; job; job = job->next) {
+		if (job->running_progs == job->stopped_progs)
+			status_string = "Stopped";
+		else
+			status_string = "Running";
+
+		printf(JOB_STATUS_FORMAT, job->jobid, status_string, job->text);
+	}
+	return EXIT_SUCCESS;
+}
+
+
+/* built-in 'pwd' handler */
+static int builtin_pwd(struct child_prog *dummy)
+{
+	puts(set_cwd());
+	return EXIT_SUCCESS;
+}
+
+/* built-in 'read VAR' handler */
+static int builtin_read(struct child_prog *child)
+{
+	int res;
+
+	if (child->argv[1]) {
+		char string[BUFSIZ];
+		char *var = 0;
+
+		string[0] = 0;  /* In case stdin has only EOF */
+		/* read string */
+		fgets(string, sizeof(string), stdin);
+		chomp(string);
+		var = malloc(strlen(child->argv[1])+strlen(string)+2);
+		if(var) {
+			sprintf(var, "%s=%s", child->argv[1], string);
+			res = set_local_var(var, 0);
+		} else
+			res = -1;
+		if (res)
+			fprintf(stderr, "read: %m\n");
+		free(var);      /* So not move up to avoid breaking errno */
+		return res;
+	} else {
+		do res=getchar(); while(res!='\n' && res!=EOF);
+		return 0;
+	}
+}
+
+/* built-in 'set VAR=value' handler */
+static int builtin_set(struct child_prog *child)
+{
+	char *temp = child->argv[1];
+	struct variables *e;
+
+	if (temp == NULL)
+		for(e = top_vars; e; e=e->next)
+			printf("%s=%s\n", e->name, e->value);
+	else
+		set_local_var(temp, 0);
+
+		return EXIT_SUCCESS;
+}
+
+
+/* Built-in 'shift' handler */
+static int builtin_shift(struct child_prog *child)
+{
+	int n=1;
+	if (child->argv[1]) {
+		n=atoi(child->argv[1]);
+	}
+	if (n>=0 && n<global_argc) {
+		/* XXX This probably breaks $0 */
+		global_argc -= n;
+		global_argv += n;
+		return EXIT_SUCCESS;
+	} else {
+		return EXIT_FAILURE;
+	}
+}
+
+/* Built-in '.' handler (read-in and execute commands from file) */
+static int builtin_source(struct child_prog *child)
+{
+	FILE *input;
+	int status;
+
+	if (child->argv[1] == NULL)
+		return EXIT_FAILURE;
+
+	/* XXX search through $PATH is missing */
+	input = fopen(child->argv[1], "r");
+	if (!input) {
+		error_msg("Couldn't open file '%s'", child->argv[1]);
+		return EXIT_FAILURE;
+	}
+
+	/* Now run the file */
+	/* XXX argv and argc are broken; need to save old global_argv
+	 * (pointer only is OK!) on this stack frame,
+	 * set global_argv=child->argv+1, recurse, and restore. */
+	mark_open(fileno(input));
+	status = parse_file_outer(input);
+	mark_closed(fileno(input));
+	fclose(input);
+	return (status);
+}
+
+static int builtin_umask(struct child_prog *child)
+{
+	mode_t new_umask;
+	const char *arg = child->argv[1];
+	char *end;
+	if (arg) {
+		new_umask=strtoul(arg, &end, 8);
+		if (*end!='\0' || end == arg) {
+			return EXIT_FAILURE;
+		}
+	} else {
+		printf("%.3o\n", (unsigned int) (new_umask=umask(0)));
+	}
+	umask(new_umask);
+	return EXIT_SUCCESS;
+}
+
+/* built-in 'unset VAR' handler */
+static int builtin_unset(struct child_prog *child)
+{
+	/* bash returned already true */
+	unset_local_var(child->argv[1]);
+	return EXIT_SUCCESS;
+}
+
+static int builtin_not_written(struct child_prog *child)
+{
+	printf("builtin_%s not written\n",child->argv[0]);
+	return EXIT_FAILURE;
+}
+#endif
+
+static int b_check_space(o_string *o, int len)
+{
+	/* It would be easy to drop a more restrictive policy
+	 * in here, such as setting a maximum string length */
+	if (o->length + len > o->maxlen) {
+		char *old_data = o->data;
+		/* assert (data == NULL || o->maxlen != 0); */
+		o->maxlen += max(2*len, B_CHUNK);
+		o->data = realloc(o->data, 1 + o->maxlen);
+		if (o->data == NULL) {
+			free(old_data);
+		}
+	}
+	return o->data == NULL;
+}
+
+static int b_addchr(o_string *o, int ch)
+{
+	debug_printf("b_addchr: %c %d %p\n", ch, o->length, o);
+	if (b_check_space(o, 1)) return B_NOSPAC;
+	o->data[o->length] = ch;
+	o->length++;
+	o->data[o->length] = '\0';
+	return 0;
+}
+
+static void b_reset(o_string *o)
+{
+	o->length = 0;
+	o->nonnull = 0;
+	if (o->data != NULL) *o->data = '\0';
+}
+
+static void b_free(o_string *o)
+{
+	b_reset(o);
+	if (o->data != NULL) free(o->data);
+	o->data = NULL;
+	o->maxlen = 0;
+}
+
+/* My analysis of quoting semantics tells me that state information
+ * is associated with a destination, not a source.
+ */
+static int b_addqchr(o_string *o, int ch, int quote)
+{
+	if (quote && strchr("*?[\\",ch)) {
+		int rc;
+		rc = b_addchr(o, '\\');
+		if (rc) return rc;
+	}
+	return b_addchr(o, ch);
+}
+
+/* belongs in utility.c */
+char *simple_itoa(unsigned int i)
+{
+	/* 21 digits plus null terminator, good for 64-bit or smaller ints */
+	static char local[22];
+	char *p = &local[21];
+	*p-- = '\0';
+	do {
+		*p-- = '0' + i % 10;
+		i /= 10;
+	} while (i > 0);
+	return p + 1;
+}
+
+static int b_adduint(o_string *o, unsigned int i)
+{
+	int r;
+	char *p = simple_itoa(i);
+	/* no escape checking necessary */
+	do r=b_addchr(o, *p++); while (r==0 && *p);
+	return r;
+}
+
+static int static_get(struct in_str *i)
+{
+	int ch=*i->p++;
+	if (ch=='\0') return EOF;
+	return ch;
+}
+
+static int static_peek(struct in_str *i)
+{
+	return *i->p;
+}
+
+#ifndef __U_BOOT__
+static inline void cmdedit_set_initial_prompt(void)
+{
+#ifndef BB_FEATURE_SH_FANCY_PROMPT
+	PS1 = NULL;
+#else
+	PS1 = getenv("PS1");
+	if(PS1==0)
+		PS1 = "\\w \\$ ";
+#endif
+}
+
+static inline void setup_prompt_string(int promptmode, char **prompt_str)
+{
+	debug_printf("setup_prompt_string %d ",promptmode);
+#ifndef BB_FEATURE_SH_FANCY_PROMPT
+	/* Set up the prompt */
+	if (promptmode == 1) {
+		if (PS1)
+			free(PS1);
+		PS1=xmalloc(strlen(cwd)+4);
+		sprintf(PS1, "%s %s", cwd, ( geteuid() != 0 ) ?  "$ ":"# ");
+		*prompt_str = PS1;
+	} else {
+		*prompt_str = PS2;
+	}
+#else
+	*prompt_str = (promptmode==1)? PS1 : PS2;
+#endif
+	debug_printf("result %s\n",*prompt_str);
+}
+#endif
+
+static void get_user_input(struct in_str *i)
+{
+#ifndef __U_BOOT__
+	char *prompt_str;
+	static char the_command[BUFSIZ];
+
+	setup_prompt_string(i->promptmode, &prompt_str);
+#ifdef BB_FEATURE_COMMAND_EDITING
+	/*
+	 ** enable command line editing only while a command line
+	 ** is actually being read; otherwise, we'll end up bequeathing
+	 ** atexit() handlers and other unwanted stuff to our
+	 ** child processes (rob@sysgo.de)
+	 */
+	cmdedit_read_input(prompt_str, the_command);
+#else
+	fputs(prompt_str, stdout);
+	fflush(stdout);
+	the_command[0]=fgetc(i->file);
+	the_command[1]='\0';
+#endif
+	fflush(stdout);
+	i->p = the_command;
+#else
+	extern char console_buffer[CFG_CBSIZE];
+	int n;
+	static char the_command[CFG_CBSIZE];
+
+	i->__promptme = 1;
+	if (i->promptmode == 1) {
+		n = readline(CFG_PROMPT);
+	} else {
+		n = readline(CFG_PROMPT_HUSH_PS2);
+	}
+	if (n == -1 ) {
+		flag_repeat = 0;
+		i->__promptme = 0;
+	}
+	n = strlen(console_buffer);
+	console_buffer[n] = '\n';
+	console_buffer[n+1]= '\0';
+	if (had_ctrlc()) flag_repeat = 0;
+	clear_ctrlc();
+	do_repeat = 0;
+	if (i->promptmode == 1) {
+		if (console_buffer[0] == '\n'&& flag_repeat == 0) {
+			strcpy(the_command,console_buffer);
+		}
+		else {
+			if (console_buffer[0] != '\n') {
+				strcpy(the_command,console_buffer);
+				flag_repeat = 1;
+			}
+			else {
+				do_repeat = 1;
+			}
+		}
+		i->p = the_command;
+	}
+	else {
+	        if (console_buffer[0] != '\n') {
+	                if (strlen(the_command) + strlen(console_buffer)
+			    < CFG_CBSIZE) {
+			        n = strlen(the_command);
+			        the_command[n-1] = ' ';
+			        strcpy(&the_command[n],console_buffer);
+			}
+			else {
+				the_command[0] = '\n';
+				the_command[1] = '\0';
+				flag_repeat = 0;
+			}
+		}
+		if (i->__promptme == 0) {
+			the_command[0] = '\n';
+			the_command[1] = '\0';
+		}
+		i->p = console_buffer;
+	}
+#endif
+}
+
+/* This is the magic location that prints prompts
+ * and gets data back from the user */
+static int file_get(struct in_str *i)
+{
+	int ch;
+
+	ch = 0;
+	/* If there is data waiting, eat it up */
+	if (i->p && *i->p) {
+		ch=*i->p++;
+	} else {
+		/* need to double check i->file because we might be doing something
+		 * more complicated by now, like sourcing or substituting. */
+#ifndef __U_BOOT__
+		if (i->__promptme && interactive && i->file == stdin) {
+			while(! i->p || (interactive && strlen(i->p)==0) ) {
+#else
+			while(! i->p  || strlen(i->p)==0 ) {
+#endif
+				get_user_input(i);
+			}
+			i->promptmode=2;
+#ifndef __U_BOOT__
+			i->__promptme = 0;
+#endif
+			if (i->p && *i->p) {
+				ch=*i->p++;
+			}
+#ifndef __U_BOOT__
+		} else {
+			ch = fgetc(i->file);
+		}
+
+#endif
+		debug_printf("b_getch: got a %d\n", ch);
+	}
+#ifndef __U_BOOT__
+	if (ch == '\n') i->__promptme=1;
+#endif
+	return ch;
+}
+
+/* All the callers guarantee this routine will never be
+ * used right after a newline, so prompting is not needed.
+ */
+static int file_peek(struct in_str *i)
+{
+#ifndef __U_BOOT__
+	if (i->p && *i->p) {
+#endif
+		return *i->p;
+#ifndef __U_BOOT__
+	} else {
+		i->peek_buf[0] = fgetc(i->file);
+		i->peek_buf[1] = '\0';
+		i->p = i->peek_buf;
+		debug_printf("b_peek: got a %d\n", *i->p);
+		return *i->p;
+	}
+#endif
+}
+
+#ifndef __U_BOOT__
+static void setup_file_in_str(struct in_str *i, FILE *f)
+#else
+static void setup_file_in_str(struct in_str *i)
+#endif
+{
+	i->peek = file_peek;
+	i->get = file_get;
+	i->__promptme=1;
+	i->promptmode=1;
+#ifndef __U_BOOT__
+	i->file = f;
+#endif
+	i->p = NULL;
+}
+
+static void setup_string_in_str(struct in_str *i, const char *s)
+{
+	i->peek = static_peek;
+	i->get = static_get;
+	i->__promptme=1;
+	i->promptmode=1;
+	i->p = s;
+}
+
+#ifndef __U_BOOT__
+static void mark_open(int fd)
+{
+	struct close_me *new = xmalloc(sizeof(struct close_me));
+	new->fd = fd;
+	new->next = close_me_head;
+	close_me_head = new;
+}
+
+static void mark_closed(int fd)
+{
+	struct close_me *tmp;
+	if (close_me_head == NULL || close_me_head->fd != fd)
+		error_msg_and_die("corrupt close_me");
+	tmp = close_me_head;
+	close_me_head = close_me_head->next;
+	free(tmp);
+}
+
+static void close_all()
+{
+	struct close_me *c;
+	for (c=close_me_head; c; c=c->next) {
+		close(c->fd);
+	}
+	close_me_head = NULL;
+}
+
+/* squirrel != NULL means we squirrel away copies of stdin, stdout,
+ * and stderr if they are redirected. */
+static int setup_redirects(struct child_prog *prog, int squirrel[])
+{
+	int openfd, mode;
+	struct redir_struct *redir;
+
+	for (redir=prog->redirects; redir; redir=redir->next) {
+		if (redir->dup == -1 && redir->word.gl_pathv == NULL) {
+			/* something went wrong in the parse.  Pretend it didn't happen */
+			continue;
+		}
+		if (redir->dup == -1) {
+			mode=redir_table[redir->type].mode;
+			openfd = open(redir->word.gl_pathv[0], mode, 0666);
+			if (openfd < 0) {
+			/* this could get lost if stderr has been redirected, but
+			   bash and ash both lose it as well (though zsh doesn't!) */
+				perror_msg("error opening %s", redir->word.gl_pathv[0]);
+				return 1;
+			}
+		} else {
+			openfd = redir->dup;
+		}
+
+		if (openfd != redir->fd) {
+			if (squirrel && redir->fd < 3) {
+				squirrel[redir->fd] = dup(redir->fd);
+			}
+			if (openfd == -3) {
+				close(openfd);
+			} else {
+				dup2(openfd, redir->fd);
+				if (redir->dup == -1)
+					close (openfd);
+			}
+		}
+	}
+	return 0;
+}
+
+static void restore_redirects(int squirrel[])
+{
+	int i, fd;
+	for (i=0; i<3; i++) {
+		fd = squirrel[i];
+		if (fd != -1) {
+			/* No error checking.  I sure wouldn't know what
+			 * to do with an error if I found one! */
+			dup2(fd, i);
+			close(fd);
+		}
+	}
+}
+
+/* never returns */
+/* XXX no exit() here.  If you don't exec, use _exit instead.
+ * The at_exit handlers apparently confuse the calling process,
+ * in particular stdin handling.  Not sure why? */
+static void pseudo_exec(struct child_prog *child)
+{
+	int i, rcode;
+	char *p;
+	struct built_in_command *x;
+	if (child->argv) {
+		for (i=0; is_assignment(child->argv[i]); i++) {
+			debug_printf("pid %d environment modification: %s\n",getpid(),child->argv[i]);
+			p = insert_var_value(child->argv[i]);
+			putenv(strdup(p));
+			if (p != child->argv[i]) free(p);
+		}
+		child->argv+=i;  /* XXX this hack isn't so horrible, since we are about
+		                        to exit, and therefore don't need to keep data
+		                        structures consistent for free() use. */
+		/* If a variable is assigned in a forest, and nobody listens,
+		 * was it ever really set?
+		 */
+		if (child->argv[0] == NULL) {
+			_exit(EXIT_SUCCESS);
+		}
+
+		/*
+		 * Check if the command matches any of the builtins.
+		 * Depending on context, this might be redundant.  But it's
+		 * easier to waste a few CPU cycles than it is to figure out
+		 * if this is one of those cases.
+		 */
+		for (x = bltins; x->cmd; x++) {
+			if (strcmp(child->argv[0], x->cmd) == 0 ) {
+				debug_printf("builtin exec %s\n", child->argv[0]);
+				rcode = x->function(child);
+				fflush(stdout);
+				_exit(rcode);
+			}
+		}
+
+		/* Check if the command matches any busybox internal commands
+		 * ("applets") here.
+		 * FIXME: This feature is not 100% safe, since
+		 * BusyBox is not fully reentrant, so we have no guarantee the things
+		 * from the .bss are still zeroed, or that things from .data are still
+		 * at their defaults.  We could exec ourself from /proc/self/exe, but I
+		 * really dislike relying on /proc for things.  We could exec ourself
+		 * from global_argv[0], but if we are in a chroot, we may not be able
+		 * to find ourself... */
+#ifdef BB_FEATURE_SH_STANDALONE_SHELL
+		{
+			int argc_l;
+			char** argv_l=child->argv;
+			char *name = child->argv[0];
+
+#ifdef BB_FEATURE_SH_APPLETS_ALWAYS_WIN
+			/* Following discussions from November 2000 on the busybox mailing
+			 * list, the default configuration, (without
+			 * get_last_path_component()) lets the user force use of an
+			 * external command by specifying the full (with slashes) filename.
+			 * If you enable BB_FEATURE_SH_APPLETS_ALWAYS_WIN, then applets
+			 * _aways_ override external commands, so if you want to run
+			 * /bin/cat, it will use BusyBox cat even if /bin/cat exists on the
+			 * filesystem and is _not_ busybox.  Some systems may want this,
+			 * most do not.  */
+			name = get_last_path_component(name);
+#endif
+			/* Count argc for use in a second... */
+			for(argc_l=0;*argv_l!=NULL; argv_l++, argc_l++);
+			optind = 1;
+			debug_printf("running applet %s\n", name);
+			run_applet_by_name(name, argc_l, child->argv);
+		}
+#endif
+		debug_printf("exec of %s\n",child->argv[0]);
+		execvp(child->argv[0],child->argv);
+		perror_msg("couldn't exec: %s",child->argv[0]);
+		_exit(1);
+	} else if (child->group) {
+		debug_printf("runtime nesting to group\n");
+		interactive=0;    /* crucial!!!! */
+		rcode = run_list_real(child->group);
+		/* OK to leak memory by not calling free_pipe_list,
+		 * since this process is about to exit */
+		_exit(rcode);
+	} else {
+		/* Can happen.  See what bash does with ">foo" by itself. */
+		debug_printf("trying to pseudo_exec null command\n");
+		_exit(EXIT_SUCCESS);
+	}
+}
+
+static void insert_bg_job(struct pipe *pi)
+{
+	struct pipe *thejob;
+
+	/* Linear search for the ID of the job to use */
+	pi->jobid = 1;
+	for (thejob = job_list; thejob; thejob = thejob->next)
+		if (thejob->jobid >= pi->jobid)
+			pi->jobid = thejob->jobid + 1;
+
+	/* add thejob to the list of running jobs */
+	if (!job_list) {
+		thejob = job_list = xmalloc(sizeof(*thejob));
+	} else {
+		for (thejob = job_list; thejob->next; thejob = thejob->next) /* nothing */;
+		thejob->next = xmalloc(sizeof(*thejob));
+		thejob = thejob->next;
+	}
+
+	/* physically copy the struct job */
+	memcpy(thejob, pi, sizeof(struct pipe));
+	thejob->next = NULL;
+	thejob->running_progs = thejob->num_progs;
+	thejob->stopped_progs = 0;
+	thejob->text = xmalloc(BUFSIZ); /* cmdedit buffer size */
+
+	/*if (pi->progs[0] && pi->progs[0].argv && pi->progs[0].argv[0]) */
+	{
+		char *bar=thejob->text;
+		char **foo=pi->progs[0].argv;
+		while(foo && *foo) {
+			bar += sprintf(bar, "%s ", *foo++);
+		}
+	}
+
+	/* we don't wait for background thejobs to return -- append it
+	   to the list of backgrounded thejobs and leave it alone */
+	printf("[%d] %d\n", thejob->jobid, thejob->progs[0].pid);
+	last_bg_pid = thejob->progs[0].pid;
+	last_jobid = thejob->jobid;
+}
+
+/* remove a backgrounded job */
+static void remove_bg_job(struct pipe *pi)
+{
+	struct pipe *prev_pipe;
+
+	if (pi == job_list) {
+		job_list = pi->next;
+	} else {
+		prev_pipe = job_list;
+		while (prev_pipe->next != pi)
+			prev_pipe = prev_pipe->next;
+		prev_pipe->next = pi->next;
+	}
+	if (job_list)
+		last_jobid = job_list->jobid;
+	else
+		last_jobid = 0;
+
+	pi->stopped_progs = 0;
+	free_pipe(pi, 0);
+	free(pi);
+}
+
+/* Checks to see if any processes have exited -- if they
+   have, figure out why and see if a job has completed */
+static int checkjobs(struct pipe* fg_pipe)
+{
+	int attributes;
+	int status;
+	int prognum = 0;
+	struct pipe *pi;
+	pid_t childpid;
+
+	attributes = WUNTRACED;
+	if (fg_pipe==NULL) {
+		attributes |= WNOHANG;
+	}
+
+	while ((childpid = waitpid(-1, &status, attributes)) > 0) {
+		if (fg_pipe) {
+			int i, rcode = 0;
+			for (i=0; i < fg_pipe->num_progs; i++) {
+				if (fg_pipe->progs[i].pid == childpid) {
+					if (i==fg_pipe->num_progs-1)
+						rcode=WEXITSTATUS(status);
+					(fg_pipe->num_progs)--;
+					return(rcode);
+				}
+			}
+		}
+
+		for (pi = job_list; pi; pi = pi->next) {
+			prognum = 0;
+			while (prognum < pi->num_progs && pi->progs[prognum].pid != childpid) {
+				prognum++;
+			}
+			if (prognum < pi->num_progs)
+				break;
+		}
+
+		if(pi==NULL) {
+			debug_printf("checkjobs: pid %d was not in our list!\n", childpid);
+			continue;
+		}
+
+		if (WIFEXITED(status) || WIFSIGNALED(status)) {
+			/* child exited */
+			pi->running_progs--;
+			pi->progs[prognum].pid = 0;
+
+			if (!pi->running_progs) {
+				printf(JOB_STATUS_FORMAT, pi->jobid, "Done", pi->text);
+				remove_bg_job(pi);
+			}
+		} else {
+			/* child stopped */
+			pi->stopped_progs++;
+			pi->progs[prognum].is_stopped = 1;
+
+#if 0
+			/* Printing this stuff is a pain, since it tends to
+			 * overwrite the prompt an inconveinient moments.  So
+			 * don't do that.  */
+			if (pi->stopped_progs == pi->num_progs) {
+				printf("\n"JOB_STATUS_FORMAT, pi->jobid, "Stopped", pi->text);
+			}
+#endif
+		}
+	}
+
+	if (childpid == -1 && errno != ECHILD)
+		perror_msg("waitpid");
+
+	/* move the shell to the foreground */
+	/*if (interactive && tcsetpgrp(shell_terminal, getpgid(0))) */
+	/*	perror_msg("tcsetpgrp-2"); */
+	return -1;
+}
+
+/* Figure out our controlling tty, checking in order stderr,
+ * stdin, and stdout.  If check_pgrp is set, also check that
+ * we belong to the foreground process group associated with
+ * that tty.  The value of shell_terminal is needed in order to call
+ * tcsetpgrp(shell_terminal, ...); */
+void controlling_tty(int check_pgrp)
+{
+	pid_t curpgrp;
+
+	if ((curpgrp = tcgetpgrp(shell_terminal = 2)) < 0
+			&& (curpgrp = tcgetpgrp(shell_terminal = 0)) < 0
+			&& (curpgrp = tcgetpgrp(shell_terminal = 1)) < 0)
+		goto shell_terminal_error;
+
+	if (check_pgrp && curpgrp != getpgid(0))
+		goto shell_terminal_error;
+
+	return;
+
+shell_terminal_error:
+		shell_terminal = -1;
+		return;
+}
+#endif
+
+/* run_pipe_real() starts all the jobs, but doesn't wait for anything
+ * to finish.  See checkjobs().
+ *
+ * return code is normally -1, when the caller has to wait for children
+ * to finish to determine the exit status of the pipe.  If the pipe
+ * is a simple builtin command, however, the action is done by the
+ * time run_pipe_real returns, and the exit code is provided as the
+ * return value.
+ *
+ * The input of the pipe is always stdin, the output is always
+ * stdout.  The outpipe[] mechanism in BusyBox-0.48 lash is bogus,
+ * because it tries to avoid running the command substitution in
+ * subshell, when that is in fact necessary.  The subshell process
+ * now has its stdout directed to the input of the appropriate pipe,
+ * so this routine is noticeably simpler.
+ */
+static int run_pipe_real(struct pipe *pi)
+{
+	int i;
+#ifndef __U_BOOT__
+	int nextin, nextout;
+	int pipefds[2];				/* pipefds[0] is for reading */
+	struct child_prog *child;
+	struct built_in_command *x;
+	char *p;
+#else
+	int nextin;
+	int flag = do_repeat ? CMD_FLAG_REPEAT : 0;
+	struct child_prog *child;
+	cmd_tbl_t *cmdtp;
+	char *p;
+#endif
+
+	nextin = 0;
+#ifndef __U_BOOT__
+	pi->pgrp = -1;
+#endif
+
+	/* Check if this is a simple builtin (not part of a pipe).
+	 * Builtins within pipes have to fork anyway, and are handled in
+	 * pseudo_exec.  "echo foo | read bar" doesn't work on bash, either.
+	 */
+	if (pi->num_progs == 1) child = & (pi->progs[0]);
+#ifndef __U_BOOT__
+	if (pi->num_progs == 1 && child->group && child->subshell == 0) {
+		int squirrel[] = {-1, -1, -1};
+		int rcode;
+		debug_printf("non-subshell grouping\n");
+		setup_redirects(child, squirrel);
+		/* XXX could we merge code with following builtin case,
+		 * by creating a pseudo builtin that calls run_list_real? */
+		rcode = run_list_real(child->group);
+		restore_redirects(squirrel);
+#else
+		if (pi->num_progs == 1 && child->group) {
+		int rcode;
+		debug_printf("non-subshell grouping\n");
+		rcode = run_list_real(child->group);
+#endif
+		return rcode;
+	} else if (pi->num_progs == 1 && pi->progs[0].argv != NULL) {
+		for (i=0; is_assignment(child->argv[i]); i++) { /* nothing */ }
+		if (i!=0 && child->argv[i]==NULL) {
+			/* assignments, but no command: set the local environment */
+			for (i=0; child->argv[i]!=NULL; i++) {
+
+				/* Ok, this case is tricky.  We have to decide if this is a
+				 * local variable, or an already exported variable.  If it is
+				 * already exported, we have to export the new value.  If it is
+				 * not exported, we need only set this as a local variable.
+				 * This junk is all to decide whether or not to export this
+				 * variable. */
+				int export_me=0;
+				char *name, *value;
+				name = xstrdup(child->argv[i]);
+				debug_printf("Local environment set: %s\n", name);
+				value = strchr(name, '=');
+				if (value)
+					*value=0;
+#ifndef __U_BOOT__
+				if ( get_local_var(name)) {
+					export_me=1;
+				}
+#endif
+				free(name);
+				p = insert_var_value(child->argv[i]);
+				set_local_var(p, export_me);
+				if (p != child->argv[i]) free(p);
+			}
+			return EXIT_SUCCESS;   /* don't worry about errors in set_local_var() yet */
+		}
+		for (i = 0; is_assignment(child->argv[i]); i++) {
+			p = insert_var_value(child->argv[i]);
+#ifndef __U_BOOT__
+			putenv(strdup(p));
+#else
+			set_local_var(p, 0);
+#endif
+			if (p != child->argv[i]) {
+				child->sp--;
+				free(p);
+			}
+		}
+		if (child->sp) {
+			char * str = NULL;
+
+			str = make_string((child->argv + i));
+			parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING);
+			free(str);
+			return last_return_code;
+		}
+#ifndef __U_BOOT__
+		for (x = bltins; x->cmd; x++) {
+			if (strcmp(child->argv[i], x->cmd) == 0 ) {
+				int squirrel[] = {-1, -1, -1};
+				int rcode;
+				if (x->function == builtin_exec && child->argv[i+1]==NULL) {
+					debug_printf("magic exec\n");
+					setup_redirects(child,NULL);
+					return EXIT_SUCCESS;
+				}
+				debug_printf("builtin inline %s\n", child->argv[0]);
+				/* XXX setup_redirects acts on file descriptors, not FILEs.
+				 * This is perfect for work that comes after exec().
+				 * Is it really safe for inline use?  Experimentally,
+				 * things seem to work with glibc. */
+				setup_redirects(child, squirrel);
+#else
+			/* check ";", because ,example , argv consist from
+			 * "help;flinfo" must not execute
+			 */
+			if (strchr(child->argv[i], ';')) {
+				printf ("Unknown command '%s' - try 'help' or use 'run' command\n",
+					child->argv[i]);
+				return -1;
+			}
+		   	/* Look up command in command table */
+			if ((cmdtp = find_cmd(child->argv[i])) == NULL) {
+				printf ("Unknown command '%s' - try 'help'\n", child->argv[i]);
+				return -1;	/* give up after bad command */
+			} else {
+				int rcode;
+#if (CONFIG_COMMANDS & CFG_CMD_BOOTD)
+		                /* avoid "bootd" recursion */
+				if (cmdtp->cmd == do_bootd) {
+					if (flag & CMD_FLAG_BOOTD) {
+						printf ("'bootd' recursion detected\n");
+						return -1;
+					}
+				else
+					flag |= CMD_FLAG_BOOTD;
+				}
+#endif	/* CFG_CMD_BOOTD */
+		                /* found - check max args */
+				if ((child->argc - i) > cmdtp->maxargs) {
+					printf ("Usage:\n%s\n", cmdtp->usage);
+					return -1;
+				}
+#endif
+				child->argv+=i;  /* XXX horrible hack */
+#ifndef __U_BOOT__
+				rcode = x->function(child);
+#else
+				/* OK - call function to do the command */
+				rcode = (cmdtp->cmd)
+					(cmdtp, flag,child->argc-i,&child->argv[i]);
+				if ( !cmdtp->repeatable )
+					flag_repeat = 0;
+#endif
+				child->argv-=i;  /* XXX restore hack so free() can work right */
+#ifndef __U_BOOT__
+				restore_redirects(squirrel);
+#endif
+				return rcode;
+			}
+		}
+#ifndef __U_BOOT__
+	}
+
+	for (i = 0; i < pi->num_progs; i++) {
+		child = & (pi->progs[i]);
+
+		/* pipes are inserted between pairs of commands */
+		if ((i + 1) < pi->num_progs) {
+			if (pipe(pipefds)<0) perror_msg_and_die("pipe");
+			nextout = pipefds[1];
+		} else {
+			nextout=1;
+			pipefds[0] = -1;
+		}
+
+		/* XXX test for failed fork()? */
+		if (!(child->pid = fork())) {
+			/* Set the handling for job control signals back to the default.  */
+			signal(SIGINT, SIG_DFL);
+			signal(SIGQUIT, SIG_DFL);
+			signal(SIGTERM, SIG_DFL);
+			signal(SIGTSTP, SIG_DFL);
+			signal(SIGTTIN, SIG_DFL);
+			signal(SIGTTOU, SIG_DFL);
+			signal(SIGCHLD, SIG_DFL);
+
+			close_all();
+
+			if (nextin != 0) {
+				dup2(nextin, 0);
+				close(nextin);
+			}
+			if (nextout != 1) {
+				dup2(nextout, 1);
+				close(nextout);
+			}
+			if (pipefds[0]!=-1) {
+				close(pipefds[0]);  /* opposite end of our output pipe */
+			}
+
+			/* Like bash, explicit redirects override pipes,
+			 * and the pipe fd is available for dup'ing. */
+			setup_redirects(child,NULL);
+
+			if (interactive && pi->followup!=PIPE_BG) {
+				/* If we (the child) win the race, put ourselves in the process
+				 * group whose leader is the first process in this pipe. */
+				if (pi->pgrp < 0) {
+					pi->pgrp = getpid();
+				}
+				if (setpgid(0, pi->pgrp) == 0) {
+					tcsetpgrp(2, pi->pgrp);
+				}
+			}
+
+			pseudo_exec(child);
+		}
+
+
+		/* put our child in the process group whose leader is the
+		   first process in this pipe */
+		if (pi->pgrp < 0) {
+			pi->pgrp = child->pid;
+		}
+		/* Don't check for errors.  The child may be dead already,
+		 * in which case setpgid returns error code EACCES. */
+		setpgid(child->pid, pi->pgrp);
+
+		if (nextin != 0)
+			close(nextin);
+		if (nextout != 1)
+			close(nextout);
+
+		/* If there isn't another process, nextin is garbage
+		   but it doesn't matter */
+		nextin = pipefds[0];
+	}
+#endif
+	return -1;
+}
+
+static int run_list_real(struct pipe *pi)
+{
+	char *save_name = NULL;
+	char **list = NULL;
+	char **save_list = NULL;
+	struct pipe *rpipe;
+	int flag_rep = 0;
+#ifndef __U_BOOT__
+	int save_num_progs;
+#endif
+	int rcode=0, flag_skip=1;
+	int flag_restore = 0;
+	int if_code=0, next_if_code=0;  /* need double-buffer to handle elif */
+	reserved_style rmode, skip_more_in_this_rmode=RES_XXXX;
+	/* check syntax for "for" */
+	for (rpipe = pi; rpipe; rpipe = rpipe->next) {
+		if ((rpipe->r_mode == RES_IN ||
+		    rpipe->r_mode == RES_FOR) &&
+		    (rpipe->next == NULL)) {
+				syntax();
+#ifdef __U_BOOT__
+				flag_repeat = 0;
+#endif
+				return 1;
+		}
+		if ((rpipe->r_mode == RES_IN &&
+			(rpipe->next->r_mode == RES_IN &&
+			rpipe->next->progs->argv != NULL))||
+			(rpipe->r_mode == RES_FOR &&
+			rpipe->next->r_mode != RES_IN)) {
+				syntax();
+#ifdef __U_BOOT__
+				flag_repeat = 0;
+#endif
+				return 1;
+		}
+	}
+	for (; pi; pi = (flag_restore != 0) ? rpipe : pi->next) {
+		if (pi->r_mode == RES_WHILE || pi->r_mode == RES_UNTIL ||
+			pi->r_mode == RES_FOR) {
+#ifdef __U_BOOT__
+				/* check Ctrl-C */
+				ctrlc();
+				if ((had_ctrlc())) {
+					return 1;
+				}
+#endif
+				flag_restore = 0;
+				if (!rpipe) {
+					flag_rep = 0;
+					rpipe = pi;
+				}
+		}
+		rmode = pi->r_mode;
+		debug_printf("rmode=%d  if_code=%d  next_if_code=%d skip_more=%d\n", rmode, if_code, next_if_code, skip_more_in_this_rmode);
+		if (rmode == skip_more_in_this_rmode && flag_skip) {
+			if (pi->followup == PIPE_SEQ) flag_skip=0;
+			continue;
+		}
+		flag_skip = 1;
+		skip_more_in_this_rmode = RES_XXXX;
+		if (rmode == RES_THEN || rmode == RES_ELSE) if_code = next_if_code;
+		if (rmode == RES_THEN &&  if_code) continue;
+		if (rmode == RES_ELSE && !if_code) continue;
+		if (rmode == RES_ELIF && !if_code) continue;
+		if (rmode == RES_FOR && pi->num_progs) {
+			if (!list) {
+				/* if no variable values after "in" we skip "for" */
+				if (!pi->next->progs->argv) continue;
+				/* create list of variable values */
+				list = make_list_in(pi->next->progs->argv,
+					pi->progs->argv[0]);
+				save_list = list;
+				save_name = pi->progs->argv[0];
+				pi->progs->argv[0] = NULL;
+				flag_rep = 1;
+			}
+			if (!(*list)) {
+				free(pi->progs->argv[0]);
+				free(save_list);
+				list = NULL;
+				flag_rep = 0;
+				pi->progs->argv[0] = save_name;
+#ifndef __U_BOOT__
+				pi->progs->glob_result.gl_pathv[0] =
+					pi->progs->argv[0];
+#endif
+				continue;
+			} else {
+				/* insert new value from list for variable */
+				if (pi->progs->argv[0])
+					free(pi->progs->argv[0]);
+				pi->progs->argv[0] = *list++;
+#ifndef __U_BOOT__
+				pi->progs->glob_result.gl_pathv[0] =
+					pi->progs->argv[0];
+#endif
+			}
+		}
+		if (rmode == RES_IN) continue;
+		if (rmode == RES_DO) {
+			if (!flag_rep) continue;
+		}
+		if ((rmode == RES_DONE)) {
+			if (flag_rep) {
+				flag_restore = 1;
+			} else {
+				rpipe = NULL;
+			}
+		}
+		if (pi->num_progs == 0) continue;
+#ifndef __U_BOOT__
+		save_num_progs = pi->num_progs; /* save number of programs */
+#endif
+		rcode = run_pipe_real(pi);
+		debug_printf("run_pipe_real returned %d\n",rcode);
+#ifndef __U_BOOT__
+		if (rcode!=-1) {
+			/* We only ran a builtin: rcode was set by the return value
+			 * of run_pipe_real(), and we don't need to wait for anything. */
+		} else if (pi->followup==PIPE_BG) {
+			/* XXX check bash's behavior with nontrivial pipes */
+			/* XXX compute jobid */
+			/* XXX what does bash do with attempts to background builtins? */
+			insert_bg_job(pi);
+			rcode = EXIT_SUCCESS;
+		} else {
+			if (interactive) {
+				/* move the new process group into the foreground */
+				if (tcsetpgrp(shell_terminal, pi->pgrp) && errno != ENOTTY)
+					perror_msg("tcsetpgrp-3");
+				rcode = checkjobs(pi);
+				/* move the shell to the foreground */
+				if (tcsetpgrp(shell_terminal, getpgid(0)) && errno != ENOTTY)
+					perror_msg("tcsetpgrp-4");
+			} else {
+				rcode = checkjobs(pi);
+			}
+			debug_printf("checkjobs returned %d\n",rcode);
+		}
+		last_return_code=rcode;
+#else
+		last_return_code=(rcode == 0) ? 0 : 1;
+#endif
+#ifndef __U_BOOT__
+		pi->num_progs = save_num_progs; /* restore number of programs */
+#endif
+		if ( rmode == RES_IF || rmode == RES_ELIF )
+			next_if_code=rcode;  /* can be overwritten a number of times */
+		if (rmode == RES_WHILE)
+			flag_rep = !last_return_code;
+		if (rmode == RES_UNTIL)
+			flag_rep = last_return_code;
+		if ( (rcode==EXIT_SUCCESS && pi->followup==PIPE_OR) ||
+		     (rcode!=EXIT_SUCCESS && pi->followup==PIPE_AND) )
+			skip_more_in_this_rmode=rmode;
+#ifndef __U_BOOT__
+		checkjobs(NULL);
+#endif
+	}
+	return rcode;
+}
+
+/* broken, of course, but OK for testing */
+static char *indenter(int i)
+{
+	static char blanks[]="                                    ";
+	return &blanks[sizeof(blanks)-i-1];
+}
+
+/* return code is the exit status of the pipe */
+static int free_pipe(struct pipe *pi, int indent)
+{
+	char **p;
+	struct child_prog *child;
+#ifndef __U_BOOT__
+	struct redir_struct *r, *rnext;
+#endif
+	int a, i, ret_code=0;
+	char *ind = indenter(indent);
+
+#ifndef __U_BOOT__
+	if (pi->stopped_progs > 0)
+		return ret_code;
+	final_printf("%s run pipe: (pid %d)\n",ind,getpid());
+#endif
+	for (i=0; i<pi->num_progs; i++) {
+		child = &pi->progs[i];
+		final_printf("%s  command %d:\n",ind,i);
+		if (child->argv) {
+			for (a=0,p=child->argv; *p; a++,p++) {
+				final_printf("%s   argv[%d] = %s\n",ind,a,*p);
+			}
+#ifndef __U_BOOT__
+			globfree(&child->glob_result);
+#else
+	                for (a = child->argc;a >= 0;a--) {
+	                        free(child->argv[a]);
+	                }
+					free(child->argv);
+	                child->argc = 0;
+#endif
+			child->argv=NULL;
+		} else if (child->group) {
+#ifndef __U_BOOT__
+			final_printf("%s   begin group (subshell:%d)\n",ind, child->subshell);
+#endif
+			ret_code = free_pipe_list(child->group,indent+3);
+			final_printf("%s   end group\n",ind);
+		} else {
+			final_printf("%s   (nil)\n",ind);
+		}
+#ifndef __U_BOOT__
+		for (r=child->redirects; r; r=rnext) {
+			final_printf("%s   redirect %d%s", ind, r->fd, redir_table[r->type].descrip);
+			if (r->dup == -1) {
+				/* guard against the case >$FOO, where foo is unset or blank */
+				if (r->word.gl_pathv) {
+					final_printf(" %s\n", *r->word.gl_pathv);
+					globfree(&r->word);
+				}
+			} else {
+				final_printf("&%d\n", r->dup);
+			}
+			rnext=r->next;
+			free(r);
+		}
+		child->redirects=NULL;
+#endif
+	}
+	free(pi->progs);   /* children are an array, they get freed all at once */
+	pi->progs=NULL;
+	return ret_code;
+}
+
+static int free_pipe_list(struct pipe *head, int indent)
+{
+	int rcode=0;   /* if list has no members */
+	struct pipe *pi, *next;
+	char *ind = indenter(indent);
+	for (pi=head; pi; pi=next) {
+		final_printf("%s pipe reserved mode %d\n", ind, pi->r_mode);
+		rcode = free_pipe(pi, indent);
+		final_printf("%s pipe followup code %d\n", ind, pi->followup);
+		next=pi->next;
+		pi->next=NULL;
+		free(pi);
+	}
+	return rcode;
+}
+
+/* Select which version we will use */
+static int run_list(struct pipe *pi)
+{
+	int rcode=0;
+#ifndef __U_BOOT__
+	if (fake_mode==0) {
+#endif
+		rcode = run_list_real(pi);
+#ifndef __U_BOOT__
+	}
+#endif
+	/* free_pipe_list has the side effect of clearing memory
+	 * In the long run that function can be merged with run_list_real,
+	 * but doing that now would hobble the debugging effort. */
+	free_pipe_list(pi,0);
+	return rcode;
+}
+
+/* The API for glob is arguably broken.  This routine pushes a non-matching
+ * string into the output structure, removing non-backslashed backslashes.
+ * If someone can prove me wrong, by performing this function within the
+ * original glob(3) api, feel free to rewrite this routine into oblivion.
+ * Return code (0 vs. GLOB_NOSPACE) matches glob(3).
+ * XXX broken if the last character is '\\', check that before calling.
+ */
+#ifndef __U_BOOT__
+static int globhack(const char *src, int flags, glob_t *pglob)
+{
+	int cnt=0, pathc;
+	const char *s;
+	char *dest;
+	for (cnt=1, s=src; s && *s; s++) {
+		if (*s == '\\') s++;
+		cnt++;
+	}
+	dest = malloc(cnt);
+	if (!dest) return GLOB_NOSPACE;
+	if (!(flags & GLOB_APPEND)) {
+		pglob->gl_pathv=NULL;
+		pglob->gl_pathc=0;
+		pglob->gl_offs=0;
+		pglob->gl_offs=0;
+	}
+	pathc = ++pglob->gl_pathc;
+	pglob->gl_pathv = realloc(pglob->gl_pathv, (pathc+1)*sizeof(*pglob->gl_pathv));
+	if (pglob->gl_pathv == NULL) return GLOB_NOSPACE;
+	pglob->gl_pathv[pathc-1]=dest;
+	pglob->gl_pathv[pathc]=NULL;
+	for (s=src; s && *s; s++, dest++) {
+		if (*s == '\\') s++;
+		*dest = *s;
+	}
+	*dest='\0';
+	return 0;
+}
+
+/* XXX broken if the last character is '\\', check that before calling */
+static int glob_needed(const char *s)
+{
+	for (; *s; s++) {
+		if (*s == '\\') s++;
+		if (strchr("*[?",*s)) return 1;
+	}
+	return 0;
+}
+
+#if 0
+static void globprint(glob_t *pglob)
+{
+	int i;
+	debug_printf("glob_t at %p:\n", pglob);
+	debug_printf("  gl_pathc=%d  gl_pathv=%p  gl_offs=%d  gl_flags=%d\n",
+		pglob->gl_pathc, pglob->gl_pathv, pglob->gl_offs, pglob->gl_flags);
+	for (i=0; i<pglob->gl_pathc; i++)
+		debug_printf("pglob->gl_pathv[%d] = %p = %s\n", i,
+			pglob->gl_pathv[i], pglob->gl_pathv[i]);
+}
+#endif
+
+static int xglob(o_string *dest, int flags, glob_t *pglob)
+{
+	int gr;
+
+ 	/* short-circuit for null word */
+	/* we can code this better when the debug_printf's are gone */
+ 	if (dest->length == 0) {
+ 		if (dest->nonnull) {
+ 			/* bash man page calls this an "explicit" null */
+ 			gr = globhack(dest->data, flags, pglob);
+ 			debug_printf("globhack returned %d\n",gr);
+ 		} else {
+			return 0;
+		}
+ 	} else if (glob_needed(dest->data)) {
+		gr = glob(dest->data, flags, NULL, pglob);
+		debug_printf("glob returned %d\n",gr);
+		if (gr == GLOB_NOMATCH) {
+			/* quote removal, or more accurately, backslash removal */
+			gr = globhack(dest->data, flags, pglob);
+			debug_printf("globhack returned %d\n",gr);
+		}
+	} else {
+		gr = globhack(dest->data, flags, pglob);
+		debug_printf("globhack returned %d\n",gr);
+	}
+	if (gr == GLOB_NOSPACE)
+		error_msg_and_die("out of memory during glob");
+	if (gr != 0) { /* GLOB_ABORTED ? */
+		error_msg("glob(3) error %d",gr);
+	}
+	/* globprint(glob_target); */
+	return gr;
+}
+#endif
+
+/* This is used to get/check local shell variables */
+static char *get_local_var(const char *s)
+{
+	struct variables *cur;
+
+	if (!s)
+		return NULL;
+	for (cur = top_vars; cur; cur=cur->next)
+		if(strcmp(cur->name, s)==0)
+			return cur->value;
+	return NULL;
+}
+
+/* This is used to set local shell variables
+   flg_export==0 if only local (not exporting) variable
+   flg_export==1 if "new" exporting environ
+   flg_export>1  if current startup environ (not call putenv()) */
+static int set_local_var(const char *s, int flg_export)
+{
+	char *name, *value;
+	int result=0;
+	struct variables *cur;
+
+	name=strdup(s);
+
+#ifdef __U_BOOT__
+	if (getenv(name) != NULL) {
+		printf ("ERROR: "
+				"There is a global environmet variable with the same name.\n");
+		return -1;
+	}
+#endif
+	/* Assume when we enter this function that we are already in
+	 * NAME=VALUE format.  So the first order of business is to
+	 * split 's' on the '=' into 'name' and 'value' */
+	value = strchr(name, '=');
+	if (value==0 && ++value==0) {
+		free(name);
+		return -1;
+	}
+	*value++ = 0;
+
+	for(cur = top_vars; cur; cur = cur->next) {
+		if(strcmp(cur->name, name)==0)
+			break;
+	}
+
+	if(cur) {
+		if(strcmp(cur->value, value)==0) {
+			if(flg_export>0 && cur->flg_export==0)
+				cur->flg_export=flg_export;
+			else
+				result++;
+		} else {
+			if(cur->flg_read_only) {
+				error_msg("%s: readonly variable", name);
+				result = -1;
+			} else {
+				if(flg_export>0 || cur->flg_export>1)
+					cur->flg_export=1;
+				free(cur->value);
+
+				cur->value = strdup(value);
+			}
+		}
+	} else {
+		cur = malloc(sizeof(struct variables));
+		if(!cur) {
+			result = -1;
+		} else {
+			cur->name = strdup(name);
+			if(cur->name == 0) {
+				free(cur);
+				result = -1;
+			} else {
+				struct variables *bottom = top_vars;
+				cur->value = strdup(value);
+				cur->next = 0;
+				cur->flg_export = flg_export;
+				cur->flg_read_only = 0;
+				while(bottom->next) bottom=bottom->next;
+				bottom->next = cur;
+			}
+		}
+	}
+
+#ifndef __U_BOOT__
+	if(result==0 && cur->flg_export==1) {
+		*(value-1) = '=';
+		result = putenv(name);
+	} else {
+#endif
+		free(name);
+#ifndef __U_BOOT__
+		if(result>0)            /* equivalent to previous set */
+			result = 0;
+	}
+#endif
+	return result;
+}
+
+#ifndef __U_BOOT__
+static void unset_local_var(const char *name)
+{
+	struct variables *cur;
+
+	if (name) {
+		for (cur = top_vars; cur; cur=cur->next) {
+			if(strcmp(cur->name, name)==0)
+				break;
+		}
+		if(cur!=0) {
+			struct variables *next = top_vars;
+			if(cur->flg_read_only) {
+				error_msg("%s: readonly variable", name);
+				return;
+			} else {
+				if(cur->flg_export)
+					unsetenv(cur->name);
+				free(cur->name);
+				free(cur->value);
+				while (next->next != cur)
+					next = next->next;
+				next->next = cur->next;
+			}
+			free(cur);
+		}
+	}
+}
+#endif
+
+static int is_assignment(const char *s)
+{
+	if (s==NULL || !isalpha(*s)) return 0;
+	++s;
+	while(isalnum(*s) || *s=='_') ++s;
+	return *s=='=';
+}
+
+#ifndef __U_BOOT__
+/* the src parameter allows us to peek forward to a possible &n syntax
+ * for file descriptor duplication, e.g., "2>&1".
+ * Return code is 0 normally, 1 if a syntax error is detected in src.
+ * Resource errors (in xmalloc) cause the process to exit */
+static int setup_redirect(struct p_context *ctx, int fd, redir_type style,
+	struct in_str *input)
+{
+	struct child_prog *child=ctx->child;
+	struct redir_struct *redir = child->redirects;
+	struct redir_struct *last_redir=NULL;
+
+	/* Create a new redir_struct and drop it onto the end of the linked list */
+	while(redir) {
+		last_redir=redir;
+		redir=redir->next;
+	}
+	redir = xmalloc(sizeof(struct redir_struct));
+	redir->next=NULL;
+	redir->word.gl_pathv=NULL;
+	if (last_redir) {
+		last_redir->next=redir;
+	} else {
+		child->redirects=redir;
+	}
+
+	redir->type=style;
+	redir->fd= (fd==-1) ? redir_table[style].default_fd : fd ;
+
+	debug_printf("Redirect type %d%s\n", redir->fd, redir_table[style].descrip);
+
+	/* Check for a '2>&1' type redirect */
+	redir->dup = redirect_dup_num(input);
+	if (redir->dup == -2) return 1;  /* syntax error */
+	if (redir->dup != -1) {
+		/* Erik had a check here that the file descriptor in question
+		 * is legit; I postpone that to "run time"
+		 * A "-" representation of "close me" shows up as a -3 here */
+		debug_printf("Duplicating redirect '%d>&%d'\n", redir->fd, redir->dup);
+	} else {
+		/* We do _not_ try to open the file that src points to,
+		 * since we need to return and let src be expanded first.
+		 * Set ctx->pending_redirect, so we know what to do at the
+		 * end of the next parsed word.
+		 */
+		ctx->pending_redirect = redir;
+	}
+	return 0;
+}
+#endif
+
+struct pipe *new_pipe(void) {
+	struct pipe *pi;
+	pi = xmalloc(sizeof(struct pipe));
+	pi->num_progs = 0;
+	pi->progs = NULL;
+	pi->next = NULL;
+	pi->followup = 0;  /* invalid */
+	return pi;
+}
+
+static void initialize_context(struct p_context *ctx)
+{
+	ctx->pipe=NULL;
+#ifndef __U_BOOT__
+	ctx->pending_redirect=NULL;
+#endif
+	ctx->child=NULL;
+	ctx->list_head=new_pipe();
+	ctx->pipe=ctx->list_head;
+	ctx->w=RES_NONE;
+	ctx->stack=NULL;
+#ifdef __U_BOOT__
+	ctx->old_flag=0;
+#endif
+	done_command(ctx);   /* creates the memory for working child */
+}
+
+/* normal return is 0
+ * if a reserved word is found, and processed, return 1
+ * should handle if, then, elif, else, fi, for, while, until, do, done.
+ * case, function, and select are obnoxious, save those for later.
+ */
+int reserved_word(o_string *dest, struct p_context *ctx)
+{
+	struct reserved_combo {
+		char *literal;
+		int code;
+		long flag;
+	};
+	/* Mostly a list of accepted follow-up reserved words.
+	 * FLAG_END means we are done with the sequence, and are ready
+	 * to turn the compound list into a command.
+	 * FLAG_START means the word must start a new compound list.
+	 */
+	static struct reserved_combo reserved_list[] = {
+		{ "if",    RES_IF,    FLAG_THEN | FLAG_START },
+		{ "then",  RES_THEN,  FLAG_ELIF | FLAG_ELSE | FLAG_FI },
+		{ "elif",  RES_ELIF,  FLAG_THEN },
+		{ "else",  RES_ELSE,  FLAG_FI   },
+		{ "fi",    RES_FI,    FLAG_END  },
+		{ "for",   RES_FOR,   FLAG_IN   | FLAG_START },
+		{ "while", RES_WHILE, FLAG_DO   | FLAG_START },
+		{ "until", RES_UNTIL, FLAG_DO   | FLAG_START },
+		{ "in",    RES_IN,    FLAG_DO   },
+		{ "do",    RES_DO,    FLAG_DONE },
+		{ "done",  RES_DONE,  FLAG_END  }
+	};
+	struct reserved_combo *r;
+	for (r=reserved_list;
+#define NRES sizeof(reserved_list)/sizeof(struct reserved_combo)
+		r<reserved_list+NRES; r++) {
+		if (strcmp(dest->data, r->literal) == 0) {
+			debug_printf("found reserved word %s, code %d\n",r->literal,r->code);
+			if (r->flag & FLAG_START) {
+				struct p_context *new = xmalloc(sizeof(struct p_context));
+				debug_printf("push stack\n");
+				if (ctx->w == RES_IN || ctx->w == RES_FOR) {
+					syntax();
+					free(new);
+					ctx->w = RES_SNTX;
+					b_reset(dest);
+					return 1;
+				}
+				*new = *ctx;   /* physical copy */
+				initialize_context(ctx);
+				ctx->stack=new;
+			} else if ( ctx->w == RES_NONE || ! (ctx->old_flag & (1<<r->code))) {
+				syntax();
+				ctx->w = RES_SNTX;
+				b_reset(dest);
+				return 1;
+			}
+			ctx->w=r->code;
+			ctx->old_flag = r->flag;
+			if (ctx->old_flag & FLAG_END) {
+				struct p_context *old;
+				debug_printf("pop stack\n");
+				done_pipe(ctx,PIPE_SEQ);
+				old = ctx->stack;
+				old->child->group = ctx->list_head;
+#ifndef __U_BOOT__
+				old->child->subshell = 0;
+#endif
+				*ctx = *old;   /* physical copy */
+				free(old);
+			}
+			b_reset (dest);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/* normal return is 0.
+ * Syntax or xglob errors return 1. */
+static int done_word(o_string *dest, struct p_context *ctx)
+{
+	struct child_prog *child=ctx->child;
+#ifndef __U_BOOT__
+	glob_t *glob_target;
+	int gr, flags = 0;
+#else
+	char *str, *s;
+	int argc, cnt;
+#endif
+
+	debug_printf("done_word: %s %p\n", dest->data, child);
+	if (dest->length == 0 && !dest->nonnull) {
+		debug_printf("  true null, ignored\n");
+		return 0;
+	}
+#ifndef __U_BOOT__
+	if (ctx->pending_redirect) {
+		glob_target = &ctx->pending_redirect->word;
+	} else {
+#endif
+		if (child->group) {
+			syntax();
+			return 1;  /* syntax error, groups and arglists don't mix */
+		}
+		if (!child->argv && (ctx->type & FLAG_PARSE_SEMICOLON)) {
+			debug_printf("checking %s for reserved-ness\n",dest->data);
+			if (reserved_word(dest,ctx)) return ctx->w==RES_SNTX;
+		}
+#ifndef __U_BOOT__
+		glob_target = &child->glob_result;
+ 		if (child->argv) flags |= GLOB_APPEND;
+#else
+		for (cnt = 1, s = dest->data; s && *s; s++) {
+			if (*s == '\\') s++;
+			cnt++;
+		}
+		str = malloc(cnt);
+		if (!str) return 1;
+		if ( child->argv == NULL) {
+			child->argc=0;
+		}
+		argc = ++child->argc;
+		child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv));
+		if (child->argv == NULL) return 1;
+		child->argv[argc-1]=str;
+		child->argv[argc]=NULL;
+		for (s = dest->data; s && *s; s++,str++) {
+			if (*s == '\\') s++;
+			*str = *s;
+		}
+		*str = '\0';
+#endif
+#ifndef __U_BOOT__
+	}
+	gr = xglob(dest, flags, glob_target);
+	if (gr != 0) return 1;
+#endif
+
+	b_reset(dest);
+#ifndef __U_BOOT__
+	if (ctx->pending_redirect) {
+		ctx->pending_redirect=NULL;
+		if (glob_target->gl_pathc != 1) {
+			error_msg("ambiguous redirect");
+			return 1;
+		}
+	} else {
+		child->argv = glob_target->gl_pathv;
+	}
+#endif
+	if (ctx->w == RES_FOR) {
+		done_word(dest,ctx);
+		done_pipe(ctx,PIPE_SEQ);
+	}
+	return 0;
+}
+
+/* The only possible error here is out of memory, in which case
+ * xmalloc exits. */
+static int done_command(struct p_context *ctx)
+{
+	/* The child is really already in the pipe structure, so
+	 * advance the pipe counter and make a new, null child.
+	 * Only real trickiness here is that the uncommitted
+	 * child structure, to which ctx->child points, is not
+	 * counted in pi->num_progs. */
+	struct pipe *pi=ctx->pipe;
+	struct child_prog *prog=ctx->child;
+
+	if (prog && prog->group == NULL
+	         && prog->argv == NULL
+#ifndef __U_BOOT__
+	         && prog->redirects == NULL) {
+#else
+										) {
+#endif
+		debug_printf("done_command: skipping null command\n");
+		return 0;
+	} else if (prog) {
+		pi->num_progs++;
+		debug_printf("done_command: num_progs incremented to %d\n",pi->num_progs);
+	} else {
+		debug_printf("done_command: initializing\n");
+	}
+	pi->progs = xrealloc(pi->progs, sizeof(*pi->progs) * (pi->num_progs+1));
+
+	prog = pi->progs + pi->num_progs;
+#ifndef __U_BOOT__
+	prog->redirects = NULL;
+#endif
+	prog->argv = NULL;
+#ifndef __U_BOOT__
+	prog->is_stopped = 0;
+#endif
+	prog->group = NULL;
+#ifndef __U_BOOT__
+	prog->glob_result.gl_pathv = NULL;
+	prog->family = pi;
+#endif
+	prog->sp = 0;
+	ctx->child = prog;
+	prog->type = ctx->type;
+
+	/* but ctx->pipe and ctx->list_head remain unchanged */
+	return 0;
+}
+
+static int done_pipe(struct p_context *ctx, pipe_style type)
+{
+	struct pipe *new_p;
+	done_command(ctx);  /* implicit closure of previous command */
+	debug_printf("done_pipe, type %d\n", type);
+	ctx->pipe->followup = type;
+	ctx->pipe->r_mode = ctx->w;
+	new_p=new_pipe();
+	ctx->pipe->next = new_p;
+	ctx->pipe = new_p;
+	ctx->child = NULL;
+	done_command(ctx);  /* set up new pipe to accept commands */
+	return 0;
+}
+
+#ifndef __U_BOOT__
+/* peek ahead in the in_str to find out if we have a "&n" construct,
+ * as in "2>&1", that represents duplicating a file descriptor.
+ * returns either -2 (syntax error), -1 (no &), or the number found.
+ */
+static int redirect_dup_num(struct in_str *input)
+{
+	int ch, d=0, ok=0;
+	ch = b_peek(input);
+	if (ch != '&') return -1;
+
+	b_getch(input);  /* get the & */
+	ch=b_peek(input);
+	if (ch == '-') {
+		b_getch(input);
+		return -3;  /* "-" represents "close me" */
+	}
+	while (isdigit(ch)) {
+		d = d*10+(ch-'0');
+		ok=1;
+		b_getch(input);
+		ch = b_peek(input);
+	}
+	if (ok) return d;
+
+	error_msg("ambiguous redirect");
+	return -2;
+}
+
+/* If a redirect is immediately preceded by a number, that number is
+ * supposed to tell which file descriptor to redirect.  This routine
+ * looks for such preceding numbers.  In an ideal world this routine
+ * needs to handle all the following classes of redirects...
+ *     echo 2>foo     # redirects fd  2 to file "foo", nothing passed to echo
+ *     echo 49>foo    # redirects fd 49 to file "foo", nothing passed to echo
+ *     echo -2>foo    # redirects fd  1 to file "foo",    "-2" passed to echo
+ *     echo 49x>foo   # redirects fd  1 to file "foo",   "49x" passed to echo
+ * A -1 output from this program means no valid number was found, so the
+ * caller should use the appropriate default for this redirection.
+ */
+static int redirect_opt_num(o_string *o)
+{
+	int num;
+
+	if (o->length==0) return -1;
+	for(num=0; num<o->length; num++) {
+		if (!isdigit(*(o->data+num))) {
+			return -1;
+		}
+	}
+	/* reuse num (and save an int) */
+	num=atoi(o->data);
+	b_reset(o);
+	return num;
+}
+
+FILE *generate_stream_from_list(struct pipe *head)
+{
+	FILE *pf;
+#if 1
+	int pid, channel[2];
+	if (pipe(channel)<0) perror_msg_and_die("pipe");
+	pid=fork();
+	if (pid<0) {
+		perror_msg_and_die("fork");
+	} else if (pid==0) {
+		close(channel[0]);
+		if (channel[1] != 1) {
+			dup2(channel[1],1);
+			close(channel[1]);
+		}
+#if 0
+#define SURROGATE "surrogate response"
+		write(1,SURROGATE,sizeof(SURROGATE));
+		_exit(run_list(head));
+#else
+		_exit(run_list_real(head));   /* leaks memory */
+#endif
+	}
+	debug_printf("forked child %d\n",pid);
+	close(channel[1]);
+	pf = fdopen(channel[0],"r");
+	debug_printf("pipe on FILE *%p\n",pf);
+#else
+	free_pipe_list(head,0);
+	pf=popen("echo surrogate response","r");
+	debug_printf("started fake pipe on FILE *%p\n",pf);
+#endif
+	return pf;
+}
+
+/* this version hacked for testing purposes */
+/* return code is exit status of the process that is run. */
+static int process_command_subs(o_string *dest, struct p_context *ctx, struct in_str *input, int subst_end)
+{
+	int retcode;
+	o_string result=NULL_O_STRING;
+	struct p_context inner;
+	FILE *p;
+	struct in_str pipe_str;
+	initialize_context(&inner);
+
+	/* recursion to generate command */
+	retcode = parse_stream(&result, &inner, input, subst_end);
+	if (retcode != 0) return retcode;  /* syntax error or EOF */
+	done_word(&result, &inner);
+	done_pipe(&inner, PIPE_SEQ);
+	b_free(&result);
+
+	p=generate_stream_from_list(inner.list_head);
+	if (p==NULL) return 1;
+	mark_open(fileno(p));
+	setup_file_in_str(&pipe_str, p);
+
+	/* now send results of command back into original context */
+	retcode = parse_stream(dest, ctx, &pipe_str, '\0');
+	/* XXX In case of a syntax error, should we try to kill the child?
+	 * That would be tough to do right, so just read until EOF. */
+	if (retcode == 1) {
+		while (b_getch(&pipe_str)!=EOF) { /* discard */ };
+	}
+
+	debug_printf("done reading from pipe, pclose()ing\n");
+	/* This is the step that wait()s for the child.  Should be pretty
+	 * safe, since we just read an EOF from its stdout.  We could try
+	 * to better, by using wait(), and keeping track of background jobs
+	 * at the same time.  That would be a lot of work, and contrary
+	 * to the KISS philosophy of this program. */
+	mark_closed(fileno(p));
+	retcode=pclose(p);
+	free_pipe_list(inner.list_head,0);
+	debug_printf("pclosed, retcode=%d\n",retcode);
+	/* XXX this process fails to trim a single trailing newline */
+	return retcode;
+}
+
+static int parse_group(o_string *dest, struct p_context *ctx,
+	struct in_str *input, int ch)
+{
+	int rcode, endch=0;
+	struct p_context sub;
+	struct child_prog *child = ctx->child;
+	if (child->argv) {
+		syntax();
+		return 1;  /* syntax error, groups and arglists don't mix */
+	}
+	initialize_context(&sub);
+	switch(ch) {
+		case '(': endch=')'; child->subshell=1; break;
+		case '{': endch='}'; break;
+		default: syntax();   /* really logic error */
+	}
+	rcode=parse_stream(dest,&sub,input,endch);
+	done_word(dest,&sub); /* finish off the final word in the subcontext */
+	done_pipe(&sub, PIPE_SEQ);  /* and the final command there, too */
+	child->group = sub.list_head;
+	return rcode;
+	/* child remains "open", available for possible redirects */
+}
+#endif
+
+/* basically useful version until someone wants to get fancier,
+ * see the bash man page under "Parameter Expansion" */
+static char *lookup_param(char *src)
+{
+	char *p=NULL;
+	if (src) {
+		p = getenv(src);
+		if (!p)
+			p = get_local_var(src);
+	}
+	return p;
+}
+
+/* return code: 0 for OK, 1 for syntax error */
+static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input)
+{
+#ifndef __U_BOOT__
+	int i, advance=0;
+#else
+	int advance=0;
+#endif
+#ifndef __U_BOOT__
+	char sep[]=" ";
+#endif
+	int ch = input->peek(input);  /* first character after the $ */
+	debug_printf("handle_dollar: ch=%c\n",ch);
+	if (isalpha(ch)) {
+		b_addchr(dest, SPECIAL_VAR_SYMBOL);
+		ctx->child->sp++;
+		while(ch=b_peek(input),isalnum(ch) || ch=='_') {
+			b_getch(input);
+			b_addchr(dest,ch);
+		}
+		b_addchr(dest, SPECIAL_VAR_SYMBOL);
+#ifndef __U_BOOT__
+	} else if (isdigit(ch)) {
+		i = ch-'0';  /* XXX is $0 special? */
+		if (i<global_argc) {
+			parse_string(dest, ctx, global_argv[i]); /* recursion */
+		}
+		advance = 1;
+#endif
+	} else switch (ch) {
+#ifndef __U_BOOT__
+		case '$':
+			b_adduint(dest,getpid());
+			advance = 1;
+			break;
+		case '!':
+			if (last_bg_pid > 0) b_adduint(dest, last_bg_pid);
+			advance = 1;
+			break;
+#endif
+		case '?':
+			b_adduint(dest,last_return_code);
+			advance = 1;
+			break;
+#ifndef __U_BOOT__
+		case '#':
+			b_adduint(dest,global_argc ? global_argc-1 : 0);
+			advance = 1;
+			break;
+#endif
+		case '{':
+			b_addchr(dest, SPECIAL_VAR_SYMBOL);
+			ctx->child->sp++;
+			b_getch(input);
+			/* XXX maybe someone will try to escape the '}' */
+			while(ch=b_getch(input),ch!=EOF && ch!='}') {
+				b_addchr(dest,ch);
+			}
+			if (ch != '}') {
+				syntax();
+				return 1;
+			}
+			b_addchr(dest, SPECIAL_VAR_SYMBOL);
+			break;
+#ifndef __U_BOOT__
+		case '(':
+			b_getch(input);
+			process_command_subs(dest, ctx, input, ')');
+			break;
+		case '*':
+			sep[0]=ifs[0];
+			for (i=1; i<global_argc; i++) {
+				parse_string(dest, ctx, global_argv[i]);
+				if (i+1 < global_argc) parse_string(dest, ctx, sep);
+			}
+			break;
+		case '@':
+		case '-':
+		case '_':
+			/* still unhandled, but should be eventually */
+			error_msg("unhandled syntax: $%c",ch);
+			return 1;
+			break;
+#endif
+		default:
+			b_addqchr(dest,'$',dest->quote);
+	}
+	/* Eat the character if the flag was set.  If the compiler
+	 * is smart enough, we could substitute "b_getch(input);"
+	 * for all the "advance = 1;" above, and also end up with
+	 * a nice size-optimized program.  Hah!  That'll be the day.
+	 */
+	if (advance) b_getch(input);
+	return 0;
+}
+
+#ifndef __U_BOOT__
+int parse_string(o_string *dest, struct p_context *ctx, const char *src)
+{
+	struct in_str foo;
+	setup_string_in_str(&foo, src);
+	return parse_stream(dest, ctx, &foo, '\0');
+}
+#endif
+
+/* return code is 0 for normal exit, 1 for syntax error */
+int parse_stream(o_string *dest, struct p_context *ctx,
+	struct in_str *input, int end_trigger)
+{
+	unsigned int ch, m;
+#ifndef __U_BOOT__
+	int redir_fd;
+	redir_type redir_style;
+#endif
+	int next;
+
+	/* Only double-quote state is handled in the state variable dest->quote.
+	 * A single-quote triggers a bypass of the main loop until its mate is
+	 * found.  When recursing, quote state is passed in via dest->quote. */
+
+	debug_printf("parse_stream, end_trigger=%d\n",end_trigger);
+	while ((ch=b_getch(input))!=EOF) {
+		m = map[ch];
+#ifdef __U_BOOT__
+		if (input->__promptme == 0) return 1;
+#endif
+		next = (ch == '\n') ? 0 : b_peek(input);
+		debug_printf("parse_stream: ch=%c (%d) m=%d quote=%d\n",
+			ch,ch,m,dest->quote);
+		if (m==0 || ((m==1 || m==2) && dest->quote)) {
+			b_addqchr(dest, ch, dest->quote);
+		} else {
+			if (m==2) {  /* unquoted IFS */
+				if (done_word(dest, ctx)) {
+					return 1;
+				}
+				/* If we aren't performing a substitution, treat a newline as a
+				 * command separator.  */
+				if (end_trigger != '\0' && ch=='\n')
+					done_pipe(ctx,PIPE_SEQ);
+			}
+			if (ch == end_trigger && !dest->quote && ctx->w==RES_NONE) {
+				debug_printf("leaving parse_stream (triggered)\n");
+				return 0;
+			}
+#if 0
+			if (ch=='\n') {
+				/* Yahoo!  Time to run with it! */
+				done_pipe(ctx,PIPE_SEQ);
+				run_list(ctx->list_head);
+				initialize_context(ctx);
+			}
+#endif
+			if (m!=2) switch (ch) {
+		case '#':
+			if (dest->length == 0 && !dest->quote) {
+				while(ch=b_peek(input),ch!=EOF && ch!='\n') { b_getch(input); }
+			} else {
+				b_addqchr(dest, ch, dest->quote);
+			}
+			break;
+		case '\\':
+			if (next == EOF) {
+				syntax();
+				return 1;
+			}
+			b_addqchr(dest, '\\', dest->quote);
+			b_addqchr(dest, b_getch(input), dest->quote);
+			break;
+		case '$':
+			if (handle_dollar(dest, ctx, input)!=0) return 1;
+			break;
+		case '\'':
+			dest->nonnull = 1;
+			while(ch=b_getch(input),ch!=EOF && ch!='\'') {
+#ifdef __U_BOOT__
+				if(input->__promptme == 0) return 1;
+#endif
+				b_addchr(dest,ch);
+			}
+			if (ch==EOF) {
+				syntax();
+				return 1;
+			}
+			break;
+		case '"':
+			dest->nonnull = 1;
+			dest->quote = !dest->quote;
+			break;
+#ifndef __U_BOOT__
+		case '`':
+			process_command_subs(dest, ctx, input, '`');
+			break;
+		case '>':
+			redir_fd = redirect_opt_num(dest);
+			done_word(dest, ctx);
+			redir_style=REDIRECT_OVERWRITE;
+			if (next == '>') {
+				redir_style=REDIRECT_APPEND;
+				b_getch(input);
+			} else if (next == '(') {
+				syntax();   /* until we support >(list) Process Substitution */
+				return 1;
+			}
+			setup_redirect(ctx, redir_fd, redir_style, input);
+			break;
+		case '<':
+			redir_fd = redirect_opt_num(dest);
+			done_word(dest, ctx);
+			redir_style=REDIRECT_INPUT;
+			if (next == '<') {
+				redir_style=REDIRECT_HEREIS;
+				b_getch(input);
+			} else if (next == '>') {
+				redir_style=REDIRECT_IO;
+				b_getch(input);
+			} else if (next == '(') {
+				syntax();   /* until we support <(list) Process Substitution */
+				return 1;
+			}
+			setup_redirect(ctx, redir_fd, redir_style, input);
+			break;
+#endif
+		case ';':
+			done_word(dest, ctx);
+			done_pipe(ctx,PIPE_SEQ);
+			break;
+		case '&':
+			done_word(dest, ctx);
+			if (next=='&') {
+				b_getch(input);
+				done_pipe(ctx,PIPE_AND);
+			} else {
+#ifndef __U_BOOT__
+				done_pipe(ctx,PIPE_BG);
+#else
+				syntax_err();
+				return 1;
+#endif
+			}
+			break;
+		case '|':
+			done_word(dest, ctx);
+			if (next=='|') {
+				b_getch(input);
+				done_pipe(ctx,PIPE_OR);
+			} else {
+				/* we could pick up a file descriptor choice here
+				 * with redirect_opt_num(), but bash doesn't do it.
+				 * "echo foo 2| cat" yields "foo 2". */
+#ifndef __U_BOOT__
+				done_command(ctx);
+#else
+				syntax_err();
+				return 1;
+#endif
+			}
+			break;
+#ifndef __U_BOOT__
+		case '(':
+		case '{':
+			if (parse_group(dest, ctx, input, ch)!=0) return 1;
+			break;
+		case ')':
+		case '}':
+			syntax();   /* Proper use of this character caught by end_trigger */
+			return 1;
+			break;
+#endif
+		default:
+			syntax();   /* this is really an internal logic error */
+			return 1;
+			}
+		}
+	}
+	/* complain if quote?  No, maybe we just finished a command substitution
+	 * that was quoted.  Example:
+	 * $ echo "`cat foo` plus more"
+	 * and we just got the EOF generated by the subshell that ran "cat foo"
+	 * The only real complaint is if we got an EOF when end_trigger != '\0',
+	 * that is, we were really supposed to get end_trigger, and never got
+	 * one before the EOF.  Can't use the standard "syntax error" return code,
+	 * so that parse_stream_outer can distinguish the EOF and exit smoothly. */
+	debug_printf("leaving parse_stream (EOF)\n");
+	if (end_trigger != '\0') return -1;
+	return 0;
+}
+
+void mapset(const unsigned char *set, int code)
+{
+	const unsigned char *s;
+	for (s=set; *s; s++) map[*s] = code;
+}
+
+void update_ifs_map(void)
+{
+	/* char *ifs and char map[256] are both globals. */
+	ifs = getenv("IFS");
+	if (ifs == NULL) ifs=" \t\n";
+	/* Precompute a list of 'flow through' behavior so it can be treated
+	 * quickly up front.  Computation is necessary because of IFS.
+	 * Special case handling of IFS == " \t\n" is not implemented.
+	 * The map[] array only really needs two bits each, and on most machines
+	 * that would be faster because of the reduced L1 cache footprint.
+	 */
+	memset(map,0,sizeof(map)); /* most characters flow through always */
+#ifndef __U_BOOT__
+	mapset("\\$'\"`", 3);      /* never flow through */
+	mapset("<>;&|(){}#", 1);   /* flow through if quoted */
+#else
+	mapset("\\$'\"", 3);       /* never flow through */
+	mapset(";&|#", 1);         /* flow through if quoted */
+#endif
+	mapset(ifs, 2);            /* also flow through if quoted */
+}
+
+/* most recursion does not come through here, the exeception is
+ * from builtin_source() */
+int parse_stream_outer(struct in_str *inp, int flag)
+{
+
+	struct p_context ctx;
+	o_string temp=NULL_O_STRING;
+	int rcode;
+#ifdef __U_BOOT__
+	int code = 0;
+#endif
+	do {
+		ctx.type = flag;
+		initialize_context(&ctx);
+		update_ifs_map();
+		if (!(flag & FLAG_PARSE_SEMICOLON) || (flag & FLAG_REPARSING)) mapset(";$&|", 0);
+		inp->promptmode=1;
+		rcode = parse_stream(&temp, &ctx, inp, '\n');
+#ifdef __U_BOOT__
+		if (rcode == 1) flag_repeat = 0;
+#endif
+		if (rcode != 1 && ctx.old_flag != 0) {
+			syntax();
+#ifdef __U_BOOT__
+			flag_repeat = 0;
+#endif
+		}
+		if (rcode != 1 && ctx.old_flag == 0) {
+			done_word(&temp, &ctx);
+			done_pipe(&ctx,PIPE_SEQ);
+#ifndef __U_BOOT__
+			run_list(ctx.list_head);
+#else
+			if (((code = run_list(ctx.list_head)) == -1))
+			    flag_repeat = 0;
+#endif
+		} else {
+			if (ctx.old_flag != 0) {
+				free(ctx.stack);
+				b_reset(&temp);
+			}
+#ifdef __U_BOOT__
+			if (inp->__promptme == 0) printf("<INTERRUPT>\n");
+			inp->__promptme = 1;
+#endif
+			temp.nonnull = 0;
+			temp.quote = 0;
+			inp->p = NULL;
+			free_pipe_list(ctx.list_head,0);
+		}
+		b_free(&temp);
+	} while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP));   /* loop on syntax errors, return on EOF */
+#ifndef __U_BOOT__
+	return 0;
+#else
+	return (code != 0) ? 1 : 0;
+#endif /* __U_BOOT__ */
+}
+
+#ifndef __U_BOOT__
+static int parse_string_outer(const char *s, int flag)
+#else
+int parse_string_outer(char *s, int flag)
+#endif	/* __U_BOOT__ */
+{
+	struct in_str input;
+#ifdef __U_BOOT__
+	char *p = NULL;
+	int rcode;
+	if ( !s || !*s)
+		return 1;
+	if (!(p = strchr(s, '\n')) || *++p) {
+		p = xmalloc(strlen(s) + 2);
+		strcpy(p, s);
+		strcat(p, "\n");
+		setup_string_in_str(&input, p);
+		rcode = parse_stream_outer(&input, flag);
+		free(p);
+		return rcode;
+	} else {
+#endif
+	setup_string_in_str(&input, s);
+	return parse_stream_outer(&input, flag);
+#ifdef __U_BOOT__
+	}
+#endif
+}
+
+#ifndef __U_BOOT__
+static int parse_file_outer(FILE *f)
+#else
+int parse_file_outer(void)
+#endif
+{
+	int rcode;
+	struct in_str input;
+#ifndef __U_BOOT__
+	setup_file_in_str(&input, f);
+#else
+	setup_file_in_str(&input);
+#endif
+	rcode = parse_stream_outer(&input, FLAG_PARSE_SEMICOLON);
+	return rcode;
+}
+
+#ifdef __U_BOOT__
+int u_boot_hush_start(void)
+{
+	top_vars = malloc(sizeof(struct variables));
+	top_vars->name = "HUSH_VERSION";
+	top_vars->value = "0.01";
+	top_vars->next = 0;
+	top_vars->flg_export = 0;
+	top_vars->flg_read_only = 1;
+	return 0;
+}
+
+static void *xmalloc(size_t size)
+{
+	void *p = NULL;
+
+	if (!(p = malloc(size))) {
+	    printf("ERROR : memory not allocated\n");
+	    for(;;);
+	}
+	return p;
+}
+
+static void *xrealloc(void *ptr, size_t size)
+{
+	void *p = NULL;
+
+	if (!(p = realloc(ptr, size))) {
+	    printf("ERROR : memory not allocated\n");
+	    for(;;);
+	}
+	return p;
+}
+#endif /* __U_BOOT__ */
+
+#ifndef __U_BOOT__
+/* Make sure we have a controlling tty.  If we get started under a job
+ * aware app (like bash for example), make sure we are now in charge so
+ * we don't fight over who gets the foreground */
+static void setup_job_control()
+{
+	static pid_t shell_pgrp;
+	/* Loop until we are in the foreground.  */
+	while (tcgetpgrp (shell_terminal) != (shell_pgrp = getpgrp ()))
+		kill (- shell_pgrp, SIGTTIN);
+
+	/* Ignore interactive and job-control signals.  */
+	signal(SIGINT, SIG_IGN);
+	signal(SIGQUIT, SIG_IGN);
+	signal(SIGTERM, SIG_IGN);
+	signal(SIGTSTP, SIG_IGN);
+	signal(SIGTTIN, SIG_IGN);
+	signal(SIGTTOU, SIG_IGN);
+	signal(SIGCHLD, SIG_IGN);
+
+	/* Put ourselves in our own process group.  */
+	setsid();
+	shell_pgrp = getpid ();
+	setpgid (shell_pgrp, shell_pgrp);
+
+	/* Grab control of the terminal.  */
+	tcsetpgrp(shell_terminal, shell_pgrp);
+}
+
+int hush_main(int argc, char **argv)
+{
+	int opt;
+	FILE *input;
+	char **e = environ;
+
+	/* XXX what should these be while sourcing /etc/profile? */
+	global_argc = argc;
+	global_argv = argv;
+
+	/* (re?) initialize globals.  Sometimes hush_main() ends up calling
+	 * hush_main(), therefore we cannot rely on the BSS to zero out this
+	 * stuff.  Reset these to 0 every time. */
+	ifs = NULL;
+	/* map[] is taken care of with call to update_ifs_map() */
+	fake_mode = 0;
+	interactive = 0;
+	close_me_head = NULL;
+	last_bg_pid = 0;
+	job_list = NULL;
+	last_jobid = 0;
+
+	/* Initialize some more globals to non-zero values */
+	set_cwd();
+#ifdef BB_FEATURE_COMMAND_EDITING
+	cmdedit_set_initial_prompt();
+#else
+	PS1 = NULL;
+#endif
+	PS2 = "> ";
+
+	/* initialize our shell local variables with the values
+	 * currently living in the environment */
+	if (e) {
+		for (; *e; e++)
+			set_local_var(*e, 2);   /* without call putenv() */
+	}
+
+	last_return_code=EXIT_SUCCESS;
+
+
+	if (argv[0] && argv[0][0] == '-') {
+		debug_printf("\nsourcing /etc/profile\n");
+		if ((input = fopen("/etc/profile", "r")) != NULL) {
+			mark_open(fileno(input));
+			parse_file_outer(input);
+			mark_closed(fileno(input));
+			fclose(input);
+		}
+	}
+	input=stdin;
+
+	while ((opt = getopt(argc, argv, "c:xif")) > 0) {
+		switch (opt) {
+			case 'c':
+				{
+					global_argv = argv+optind;
+					global_argc = argc-optind;
+					opt = parse_string_outer(optarg, FLAG_PARSE_SEMICOLON);
+					goto final_return;
+				}
+				break;
+			case 'i':
+				interactive++;
+				break;
+			case 'f':
+				fake_mode++;
+				break;
+			default:
+#ifndef BB_VER
+				fprintf(stderr, "Usage: sh [FILE]...\n"
+						"   or: sh -c command [args]...\n\n");
+				exit(EXIT_FAILURE);
+#else
+				show_usage();
+#endif
+		}
+	}
+	/* A shell is interactive if the `-i' flag was given, or if all of
+	 * the following conditions are met:
+	 *	  no -c command
+	 *    no arguments remaining or the -s flag given
+	 *    standard input is a terminal
+	 *    standard output is a terminal
+	 *    Refer to Posix.2, the description of the `sh' utility. */
+	if (argv[optind]==NULL && input==stdin &&
+			isatty(fileno(stdin)) && isatty(fileno(stdout))) {
+		interactive++;
+	}
+
+	debug_printf("\ninteractive=%d\n", interactive);
+	if (interactive) {
+		/* Looks like they want an interactive shell */
+		fprintf(stdout, "\nhush -- the humble shell v0.01 (testing)\n\n");
+		setup_job_control();
+	}
+
+	if (argv[optind]==NULL) {
+		opt=parse_file_outer(stdin);
+		goto final_return;
+	}
+
+	debug_printf("\nrunning script '%s'\n", argv[optind]);
+	global_argv = argv+optind;
+	global_argc = argc-optind;
+	input = xfopen(argv[optind], "r");
+	opt = parse_file_outer(input);
+
+#ifdef BB_FEATURE_CLEAN_UP
+	fclose(input);
+	if (cwd && cwd != unknown)
+		free((char*)cwd);
+	{
+		struct variables *cur, *tmp;
+		for(cur = top_vars; cur; cur = tmp) {
+			tmp = cur->next;
+			if (!cur->flg_read_only) {
+				free(cur->name);
+				free(cur->value);
+				free(cur);
+			}
+		}
+	}
+#endif
+
+final_return:
+	return(opt?opt:last_return_code);
+}
+#endif
+
+static char *insert_var_value(char *inp)
+{
+	int res_str_len = 0;
+	int len;
+	int done = 0;
+	char *p, *p1, *res_str = NULL;
+
+	while ((p = strchr(inp, SPECIAL_VAR_SYMBOL))) {
+		if (p != inp) {
+			len = p - inp;
+			res_str = xrealloc(res_str, (res_str_len + len));
+			strncpy((res_str + res_str_len), inp, len);
+			res_str_len += len;
+		}
+		inp = ++p;
+		p = strchr(inp, SPECIAL_VAR_SYMBOL);
+		*p = '\0';
+		if ((p1 = lookup_param(inp))) {
+			len = res_str_len + strlen(p1);
+			res_str = xrealloc(res_str, (1 + len));
+			strcpy((res_str + res_str_len), p1);
+			res_str_len = len;
+		}
+		*p = SPECIAL_VAR_SYMBOL;
+		inp = ++p;
+		done = 1;
+	}
+	if (done) {
+		res_str = xrealloc(res_str, (1 + res_str_len + strlen(inp)));
+		strcpy((res_str + res_str_len), inp);
+		while ((p = strchr(res_str, '\n'))) {
+			*p = ' ';
+		}
+	}
+	return (res_str == NULL) ? inp : res_str;
+}
+
+static char **make_list_in(char **inp, char *name)
+{
+	int len, i;
+	int name_len = strlen(name);
+	int n = 0;
+	char **list;
+	char *p1, *p2, *p3;
+
+	/* create list of variable values */
+	list = xmalloc(sizeof(*list));
+	for (i = 0; inp[i]; i++) {
+		p3 = insert_var_value(inp[i]);
+		p1 = p3;
+		while (*p1) {
+			if ((*p1 == ' ')) {
+				p1++;
+				continue;
+			}
+			if ((p2 = strchr(p1, ' '))) {
+				len = p2 - p1;
+			} else {
+				len = strlen(p1);
+				p2 = p1 + len;
+			}
+			/* we use n + 2 in realloc for list,because we add
+			 * new element and then we will add NULL element */
+			list = xrealloc(list, sizeof(*list) * (n + 2));
+			list[n] = xmalloc(2 + name_len + len);
+			strcpy(list[n], name);
+			strcat(list[n], "=");
+			strncat(list[n], p1, len);
+			list[n++][name_len + len + 1] = '\0';
+			p1 = p2;
+		}
+		if (p3 != inp[i]) free(p3);
+	}
+	list[n] = NULL;
+	return list;
+}
+
+/* Make new string for parser */
+static char * make_string(char ** inp)
+{
+	char *p;
+	char *str = NULL;
+	int n;
+	int len = 2;
+
+	for (n = 0; inp[n]; n++) {
+		p = insert_var_value(inp[n]);
+		str = xrealloc(str, (len + strlen(p)));
+		if (n) {
+			strcat(str, " ");
+		} else {
+			*str = '\0';
+		}
+		strcat(str, p);
+		len = strlen(str) + 3;
+		if (p != inp[n]) free(p);
+	}
+	len = strlen(str);
+	*(str + len) = '\n';
+	*(str + len + 1) = '\0';
+	return str;
+}
+
+#endif /* CFG_HUSH_PARSER */
+/****************************************************************************/
diff --git a/cpu/74xx_7xx/cache.S b/cpu/74xx_7xx/cache.S
new file mode 100644
index 00000000000..f35966c61e9
--- /dev/null
+++ b/cpu/74xx_7xx/cache.S
@@ -0,0 +1,381 @@
+#include <config.h>
+#include <mpc74xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+	mfspr	r3,PVR
+	rlwinm	r3,r3,16,16,31
+	cmpi	0,r3,1
+	beqlr			/* for 601, do nothing */
+	/* 603/604 processor - use invalidate-all bit in HID0 */
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_DCFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_data_cache)
+	lis	r3,0
+	lis	r5,CACHE_LINE_SIZE
+flush:
+	cmp	0,1,r3,r5
+	bge	done
+	lwz	r5,0(r3)
+	lis	r5,CACHE_LINE_SIZE
+	addi	r3,r3,0x4
+	b	flush
+done:
+	blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+	mfspr	r5,PVR
+	rlwinm	r5,r5,16,16,31
+	cmpi	0,r5,1
+	beqlr				/* for 601, do nothing */
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5	/* align r3 down to cache line */
+	subf	r4,r3,r4	/* r4 = offset of stop from start of cache line */
+	add	r4,r4,r5	/* r4 += cache_line_size-1 */
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE  /* r4 = number of cache lines to flush */
+	beqlr				  /* if r4 == 0 return */
+	mtctr	r4			  /* ctr = r4 */
+
+	sync
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbf	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbf's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+	mfspr	r5,PVR
+	rlwinm	r5,r5,16,16,31
+	cmpi	0,r5,1
+	beqlr				/* for 601, do nothing */
+	rlwinm	r3,r3,0,0,19		/* Get page base address */
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3			/* Write line to ram */
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+	mfspr	r5,PVR
+	rlwinm	r5,r5,16,16,31
+	cmpi	0,r5,1
+	beqlr				/* for 601, do nothing */
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+1:	icbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+	li	r0,4096/CACHE_LINE_SIZE
+	mtctr	r0
+1:	dcbz	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_ICFI|HID0_ILOCK
+	andc	r3, r3, r5
+	ori	r3, r3, HID0_ICE
+	ori	r5, r3, HID0_ICFI
+	mtspr	HID0, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+	mfspr	r3, HID0
+	li	r5, 0
+	ori	r5, r5, HID0_ICE
+	andc	r3, r3, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_ICE
+	blr
+
+
+_GLOBAL(l1dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+	blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+#ifdef CFG_L2
+	mflr	r5
+	bl	l2cache_enable		/* uses r3 and r4 */
+	sync
+	mtlr	r5
+#endif
+	blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_data_cache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_data_cache	/* uses r3 and r5 */
+	sync
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	li	r5, HID0_DCE|HID0_DCFI
+	andc	r3, r3, r5		/* no enable, no invalidate */
+	mtspr	HID0, r3
+	sync
+#ifdef CFG_L2
+	bl	l2cache_disable_no_flush /* uses r3 */
+#endif
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_DCE
+	blr
+
+/*
+ * Invalidate L2 cache using L2I and polling L2IP
+ */
+_GLOBAL(l2cache_invalidate)
+	sync
+	oris	r3, r3, L2CR_L2I@h
+	sync
+	mtspr	l2cr, r3
+	sync
+invl2:
+	mfspr	r3, l2cr
+	andi.	r3, r3, L2CR_L2IP
+	bne	invl2
+	/* turn off the global invalidate bit */
+	mfspr	r3, l2cr
+	rlwinm	r3, r3, 0, 11, 9
+	sync
+	mtspr	l2cr, r3
+	sync
+	blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+	mflr	r4			/* save link register */
+	bl	l2cache_invalidate	/* uses r3 */
+	sync
+	lis	r3, L2_ENABLE@h
+	ori	r3, r3, L2_ENABLE@l
+	mtspr	l2cr, r3
+	isync
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_data_cache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_data_cache	/* uses r3 and r5 */
+	sync
+	mtlr	r4			/* restore link register */
+l2cache_disable_no_flush:		/* provide way to disable L2 w/o flushing */
+	lis	r3, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	mtspr	l2cr, r3
+	isync
+	blr
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
new file mode 100644
index 00000000000..e9899a9103f
--- /dev/null
+++ b/cpu/arm720t/start.S
@@ -0,0 +1,429 @@
+/*
+ *  armboot - Startup Code for ARM720 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:	b       reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+/*
+ * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h)
+ */
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+	.word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+	.word armboot_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+	.word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0x13
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifdef CONFIG_INIT_CRITICAL
+	bl	cpu_init_crit
+#endif
+
+relocate:
+	/*
+	 * relocate armboot to RAM
+	 */
+	adr	r0, _start		/* r0 <- current position of code */
+	ldr	r2, _armboot_start
+	ldr	r3, _armboot_end
+	sub	r2, r3, r2		/* r2 <- size of armboot */
+	ldr	r1, _TEXT_BASE		/* r1 <- destination address */
+	add	r2, r0, r2		/* r2 <- source end address */
+
+	/*
+	 * r0 = source address
+	 * r1 = target address
+	 * r2 = source end address
+	 */
+copy_loop:
+	ldmia	r0!, {r3-r10}
+	stmia	r1!, {r3-r10}
+	cmp	r0, r2
+	ble	copy_loop
+
+	/* set up the stack */
+	ldr	r0, _armboot_end
+	add	r0, r0, #CONFIG_STACKSIZE
+	sub	sp, r0, #12		/* leave 3 words for abort-stack */
+
+	ldr	pc, _start_armboot
+
+_start_armboot:	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+/* Interupt-Controller base addresses */
+INTMR1:		.word	0x80000280 @ 32 bit size
+INTMR2:		.word	0x80001280 @ 16 bit size
+INTMR3:		.word	0x80002280 @  8 bit size
+
+/* SYSCONs */
+SYSCON1:	.word	0x80000100
+SYSCON2:	.word	0x80001100
+SYSCON3:	.word	0x80002200
+
+#define CLKCTL	       0x6  /* mask */
+#define CLKCTL_18      0x0  /* 18.432 MHz */
+#define CLKCTL_36      0x2  /* 36.864 MHz */
+#define CLKCTL_49      0x4  /* 49.152 MHz */
+#define CLKCTL_73      0x6  /* 73.728 MHz */
+
+cpu_init_crit:
+	/*
+	 * mask all IRQs by clearing all bits in the INTMRs
+	 */
+	mov	r1, #0x00
+	ldr	r0, INTMR1
+	str	r1, [r0]
+	ldr	r0, INTMR2
+	str	r1, [r0]
+	ldr	r0, INTMR3
+	str	r1, [r0]
+
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15,0,r0,c1,c0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x0000008f	@ clear bits 7, 3:0 (B--- WCAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	mcr	p15,0,r0,c1,c0
+
+#ifdef CONFIG_ARM7_REVD
+	/* set clock speed */
+	/* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */
+	/* !!! not doing DRAM refresh properly! */
+	ldr	r0, SYSCON3
+	ldr	r1, [r0]
+	bic	r1, r1, #CLKCTL
+	orr	r1, r1, #CLKCTL_36
+	str	r1, [r0]
+#endif
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip, lr
+	bl	memsetup
+	mov	lr, ip
+
+	mov	pc, lr
+
+
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+
+	ldr	r2, _armboot_end
+	add	r2, r2, #CONFIG_STACKSIZE
+	sub	r2, r2, #8
+	ldmia	r2, {r2 - r4}                   @ get pc, cpsr, old_r0
+	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r4}                   @ save sp_SVC, lr_SVC, pc, cpsr, old_r
+	mov	r0, sp
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
+	str     lr, [r8, #0]                    @ Save calling PC
+	mrs     r6, spsr
+	str     r6, [r8, #4]                    @ Save CPSR
+	str     r0, [r8, #8]                    @ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_end		@ setup our mode stack
+	add	r13, r13, #CONFIG_STACKSIZE	@ resides at top of normal stack
+	sub	r13, r13, #8
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str     lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	msr	spsr_c, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	mov     ip, #0
+	mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
+	mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
+	mrc     p15, 0, ip, c1, c0, 0           @ get ctrl register
+	bic     ip, ip, #0x000f                 @ ............wcam
+	bic     ip, ip, #0x2100                 @ ..v....s........
+	mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
+	mov     pc, r0
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
new file mode 100644
index 00000000000..a858dfa05eb
--- /dev/null
+++ b/cpu/arm920t/start.S
@@ -0,0 +1,475 @@
+/*
+ *  armboot - Startup Code for ARM920 CPU-core
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:	b       reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+/*
+ * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h)
+ */
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+	.word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+	.word armboot_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+	.word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0xd3
+	msr	cpsr,r0
+
+/* turn off the watchdog */
+#if defined(CONFIG_S3C2400)
+#define pWTCON		0x15300000
+/* Interupt-Controller base addresses */
+#define INTMSK		0x14400008
+/* clock divisor register */
+#define CLKDIVN		0x14800014
+#elif defined(CONFIG_S3C2410)
+#define pWTCON		0x53000000
+/* Interupt-Controller base addresses */
+#define INTMSK		0x4A000008
+#define INTSUBMSK	0x4A00001C
+/* clock divisor register */
+#define CLKDIVN		0x4C000014
+#endif
+
+	ldr     r0, =pWTCON
+	mov     r1, #0x0
+	str     r1, [r0]
+
+	/*
+	 * mask all IRQs by setting all bits in the INTMR - default
+	 */
+	mov	r1, #0xffffffff
+	ldr	r0, =INTMSK
+	str	r1, [r0]
+#if defined(CONFIG_S3C2410)
+	ldr	r1, =0x3ff
+	ldr	r0, =INTSUBMSK
+	str	r1, [r0]
+#endif
+
+	/* FCLK:HCLK:PCLK = 1:2:4 */
+	/* default FCLK is 120 MHz ! */
+	ldr	r0, =CLKDIVN
+	mov	r1, #3
+	str	r1, [r0]
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifdef CONFIG_INIT_CRITICAL
+	bl	cpu_init_crit
+#endif
+
+relocate:
+	/*
+	 * relocate armboot to RAM
+	 */
+	adr	r0, _start		/* r0 <- current position of code */
+	ldr	r2, _armboot_start
+	ldr	r3, _armboot_end
+	sub	r2, r3, r2		/* r2 <- size of armboot */
+	ldr	r1, _TEXT_BASE		/* r1 <- destination address */
+	add	r2, r0, r2		/* r2 <- source end address */
+
+	/*
+	 * r0 = source address
+	 * r1 = target address
+	 * r2 = source end address
+	 */
+copy_loop:
+	ldmia	r0!, {r3-r10}
+	stmia	r1!, {r3-r10}
+	cmp	r0, r2
+	ble	copy_loop
+
+#if 0
+	/* try doing this stuff after the relocation */
+	ldr     r0, =pWTCON
+	mov     r1, #0x0
+	str     r1, [r0]
+
+	/*
+	 * mask all IRQs by setting all bits in the INTMR - default
+	 */
+	mov	r1, #0xffffffff
+	ldr	r0, =INTMR
+	str	r1, [r0]
+
+	/* FCLK:HCLK:PCLK = 1:2:4 */
+	/* default FCLK is 120 MHz ! */
+	ldr	r0, =CLKDIVN
+	mov	r1, #3
+	str	r1, [r0]
+	/* END stuff after relocation */
+#endif
+
+	/* set up the stack */
+	ldr	r0, _armboot_end
+	add	r0, r0, #CONFIG_STACKSIZE
+	sub	sp, r0, #12		/* leave 3 words for abort-stack */
+
+	ldr	pc, _start_armboot
+
+_start_armboot:	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * disable MMU stuff and caches
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
+	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
+	mcr	p15, 0, r0, c1, c0, 0
+
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip, lr
+	bl	memsetup
+	mov	lr, ip
+
+	mov	pc, lr
+
+
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+
+	ldr	r2, _armboot_end
+	add	r2, r2, #CONFIG_STACKSIZE
+	sub	r2, r2, #8
+	ldmia	r2, {r2 - r4}                   @ get pc, cpsr, old_r0
+	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r4}                   @ save sp_SVC, lr_SVC, pc, cpsr, old_r
+	mov	r0, sp
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
+	str     lr, [r8, #0]                    @ Save calling PC
+	mrs     r6, spsr
+	str     r6, [r8, #4]                    @ Save CPSR
+	str     r0, [r8, #8]                    @ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_end		@ setup our mode stack
+	add	r13, r13, #CONFIG_STACKSIZE	@ resides at top of normal stack
+	sub	r13, r13, #8
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str     lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	@ msr	spsr_c, r13
+	msr	spsr, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+#ifdef CONFIG_S3C2400
+	bl	disable_interrupts
+	ldr	r1, _rWTCON
+	ldr	r2, _rWTCNT
+	/* Disable watchdog */
+	mov	r3, #0x0000
+	str	r3, [r1]
+	/* Initialize watchdog timer count register */
+	mov	r3, #0x0001
+	str	r3, [r2]
+	/* Enable watchdog timer; assert reset at timer timeout */
+	mov	r3, #0x0021
+	str	r3, [r1]
+_loop_forever:
+	b	_loop_forever
+_rWTCON:
+	.word	0x15300000
+_rWTCNT:
+	.word	0x15300008
+#else /* ! CONFIG_S3C2400 */
+	mov     ip, #0
+	mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
+	mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
+	mrc     p15, 0, ip, c1, c0, 0           @ get ctrl register
+	bic     ip, ip, #0x000f                 @ ............wcam
+	bic     ip, ip, #0x2100                 @ ..v....s........
+	mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
+	mov     pc, r0
+#endif /* CONFIG_S3C2400 */
diff --git a/cpu/mpc8260/ether_scc.c b/cpu/mpc8260/ether_scc.c
new file mode 100644
index 00000000000..ff164fece73
--- /dev/null
+++ b/cpu/mpc8260/ether_scc.c
@@ -0,0 +1,358 @@
+/*
+ * MPC8260 SCC Ethernet
+ *
+ * Copyright (c) 2000 MontaVista Software, Inc.   Dan Malek (dmalek@jlc.net)
+ *
+ * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright (c) 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/cpm_8260.h>
+#include <mpc8260.h>
+#include <net.h>
+#include <command.h>
+#include <config.h>
+
+#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_COMMANDS & CFG_CMD_NET)
+
+#if (CONFIG_ETHER_INDEX == 1)
+#  define PROFF_ENET            PROFF_SCC1
+#  define CPM_CR_ENET_PAGE      CPM_CR_SCC1_PAGE
+#  define CPM_CR_ENET_SBLOCK    CPM_CR_SCC1_SBLOCK
+#  define CMXSCR_MASK          (CMXSCR_SC1          |\
+                                CMXSCR_RS1CS_MSK    |\
+                                CMXSCR_TS1CS_MSK)
+
+#elif (CONFIG_ETHER_INDEX == 2)
+#  define PROFF_ENET            PROFF_SCC2
+#  define CPM_CR_ENET_PAGE      CPM_CR_SCC2_PAGE
+#  define CPM_CR_ENET_SBLOCK    CPM_CR_SCC2_SBLOCK
+#  define CMXSCR_MASK          (CMXSCR_SC2          |\
+                                CMXSCR_RS2CS_MSK    |\
+                                CMXSCR_TS2CS_MSK)
+
+#elif (CONFIG_ETHER_INDEX == 3)
+#  define PROFF_ENET            PROFF_SCC3
+#  define CPM_CR_ENET_PAGE      CPM_CR_SCC3_PAGE
+#  define CPM_CR_ENET_SBLOCK    CPM_CR_SCC3_SBLOCK
+#  define CMXSCR_MASK          (CMXSCR_SC3          |\
+                                CMXSCR_RS3CS_MSK    |\
+                                CMXSCR_TS3CS_MSK)
+#elif (CONFIG_ETHER_INDEX == 4)
+#  define PROFF_ENET            PROFF_SCC4
+#  define CPM_CR_ENET_PAGE      CPM_CR_SCC4_PAGE
+#  define CPM_CR_ENET_SBLOCK    CPM_CR_SCC4_SBLOCK
+#  define CMXSCR_MASK          (CMXSCR_SC4          |\
+                                CMXSCR_RS4CS_MSK    |\
+                                CMXSCR_TS4CS_MSK)
+
+#endif
+
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH  1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 1000000
+
+static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
+
+static uint rxIdx;      /* index of the current RX buffer */
+static uint txIdx;      /* index of the current TX buffer */
+
+/*
+ * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+ *  immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+    cbd_t rxbd[PKTBUFSRX];         /* Rx BD */
+    cbd_t txbd[TX_BUF_CNT];        /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+
+int eth_send(volatile void *packet, int length)
+{
+    int i;
+    int result = 0;
+
+    if (length <= 0) {
+        printf("scc: bad packet size: %d\n", length);
+        goto out;
+    }
+
+    for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+        if (i >= TOUT_LOOP) {
+            printf("scc: tx buffer not ready\n");
+            goto out;
+        }
+    }
+
+    rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
+    rtx->txbd[txIdx].cbd_datlen = length;
+    rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
+                                BD_ENET_TX_WRAP);
+
+    for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
+        if (i >= TOUT_LOOP) {
+            printf("scc: tx error\n");
+            goto out;
+        }
+    }
+
+    /* return only status bits */
+    result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
+
+ out:
+    return result;
+}
+
+
+int eth_rx(void)
+{
+    int length;
+
+    for (;;)
+    {
+        if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+            length = -1;
+            break;     /* nothing received - leave for() loop */
+        }
+
+        length = rtx->rxbd[rxIdx].cbd_datlen;
+
+        if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
+        {
+            printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
+        }
+        else
+        {
+            /* Pass the packet up to the protocol layers. */
+            NetReceive(NetRxPackets[rxIdx], length - 4);
+        }
+
+
+        /* Give the buffer back to the SCC. */
+        rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+        /* wrap around buffer index when necessary */
+        if ((rxIdx + 1) >= PKTBUFSRX) {
+            rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
+                                               BD_ENET_RX_EMPTY);
+            rxIdx = 0;
+        }
+        else {
+            rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+            rxIdx++;
+        }
+    }
+    return length;
+}
+
+/**************************************************************
+ *
+ * SCC Ethernet Initialization Routine
+ *
+ *************************************************************/
+
+int eth_init(bd_t *bis)
+{
+    int i;
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    scc_enet_t *pram_ptr;
+    uint dpaddr;
+
+    rxIdx = 0;
+    txIdx = 0;
+
+    /* assign static pointer to BD area */
+    dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
+    rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
+
+    /* 24.21 - (1-3): ioports have been set up already */
+
+    /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
+    immr->im_cpmux.cmx_uar = 0;
+    immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
+                               CFG_CMXSCR_VALUE);
+
+
+    /* 24.21 (6) write RBASE and TBASE to parameter RAM */
+    pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]);
+    pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]);
+    pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]);
+
+    pram_ptr->sen_genscc.scc_rfcr = 0x18;  /* Nrml Ops and Mot byte ordering */
+    pram_ptr->sen_genscc.scc_tfcr = 0x18;  /* Mot byte ordering, Nrml access */
+
+    pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */
+
+    pram_ptr->sen_cpres  = ~(0x0);        /* Preset CRC */
+    pram_ptr->sen_cmask  = 0xdebb20e3;    /* Constant Mask for CRC */
+
+
+    /* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */
+    while(immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+    immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE,
+                                     CPM_CR_ENET_SBLOCK,
+                                     0x0c,
+                                     CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+    /* 24.21 - (8-18): Set up parameter RAM */
+    pram_ptr->sen_crcec  = 0x0;           /* Error Counter CRC (unused) */
+    pram_ptr->sen_alec   = 0x0;           /* Align Error Counter (unused) */
+    pram_ptr->sen_disfc  = 0x0;           /* Discard Frame Counter (unused) */
+
+    pram_ptr->sen_pads   = 0x8888;        /* Short Frame PAD Characters */
+
+    pram_ptr->sen_retlim = 15;            /* Retry Limit Threshold */
+
+    pram_ptr->sen_maxflr = 1518;  /* MAX Frame Length Register */
+    pram_ptr->sen_minflr = 64;            /* MIN Frame Length Register */
+
+    pram_ptr->sen_maxd1  = DBUF_LENGTH;   /* MAX DMA1 Length Register */
+    pram_ptr->sen_maxd2  = DBUF_LENGTH;   /* MAX DMA2 Length Register */
+
+    pram_ptr->sen_gaddr1 = 0x0;   /* Group Address Filter 1 (unused) */
+    pram_ptr->sen_gaddr2 = 0x0;   /* Group Address Filter 2 (unused) */
+    pram_ptr->sen_gaddr3 = 0x0;   /* Group Address Filter 3 (unused) */
+    pram_ptr->sen_gaddr4 = 0x0;   /* Group Address Filter 4 (unused) */
+
+#  define ea bis->bi_enetaddr
+    pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+    pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+    pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+#  undef ea
+
+    pram_ptr->sen_pper   = 0x0;   /* Persistence (unused) */
+
+    pram_ptr->sen_iaddr1 = 0x0;   /* Individual Address Filter 1 (unused) */
+    pram_ptr->sen_iaddr2 = 0x0;   /* Individual Address Filter 2 (unused) */
+    pram_ptr->sen_iaddr3 = 0x0;   /* Individual Address Filter 3 (unused) */
+    pram_ptr->sen_iaddr4 = 0x0;   /* Individual Address Filter 4 (unused) */
+
+    pram_ptr->sen_taddrh = 0x0;   /* Tmp Address (MSB) (unused) */
+    pram_ptr->sen_taddrm = 0x0;   /* Tmp Address (unused) */
+    pram_ptr->sen_taddrl = 0x0;   /* Tmp Address (LSB) (unused) */
+
+
+    /* 24.21 - (19): Initialize RxBD */
+    for (i = 0; i < PKTBUFSRX; i++)
+    {
+        rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+        rtx->rxbd[i].cbd_datlen = 0;                  /* Reset */
+        rtx->rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
+    }
+
+    rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+    /* 24.21 - (20): Initialize TxBD */
+    for (i = 0; i < TX_BUF_CNT; i++)
+    {
+        rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD  |
+                               BD_ENET_TX_LAST |
+                               BD_ENET_TX_TC);
+        rtx->txbd[i].cbd_datlen = 0;                  /* Reset */
+        rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
+    }
+
+    rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+    /* 24.21 - (21): Write 0xffff to SCCE */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0);
+
+    /* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE |
+                                                   SCCE_ENET_RXF |
+                                                   SCCE_ENET_TXB);
+
+    /* 24.21 - (23): we don't use ethernet interrupts */
+
+    /* 24.21 - (24): Clear GSMR_H to enable normal operations */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0;
+
+    /* 24.21 - (25): Clear GSMR_L to enable normal operations */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI        |
+                                                    SCC_GSMRL_TPL_48     |
+                                                    SCC_GSMRL_TPP_10     |
+                                                    SCC_GSMRL_MODE_ENET);
+
+    /* 24.21 - (26): Initialize DSR */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555;
+
+    /* 24.21 - (27): Initialize PSMR2
+     *
+     * Settings:
+     *	CRC = 32-Bit CCITT
+     *	NIB = Begin searching for SFD 22 bits after RENA
+     *	FDE = Full Duplex Enable
+     *	BRO = Reject broadcast packets
+     *	PROMISCOUS = Catch all packets regardless of dest. MAC adress
+     */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr   =	SCC_PSMR_ENCRC	|
+							SCC_PSMR_NIB22	|
+#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
+							SCC_PSMR_FDE	|
+#endif
+#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
+							SCC_PSMR_BRO	|
+#endif
+#if defined(CONFIG_SCC_ENET_PROMISCOUS)
+							SCC_PSMR_PRO	|
+#endif
+							0;
+
+    /* 24.21 - (28): Write to GSMR_L to enable SCC */
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
+                                                     SCC_GSMRL_ENT);
+
+    return 1;
+}
+
+
+
+void eth_halt(void)
+{
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
+                                                      SCC_GSMRL_ENT);
+}
+
+#if 0
+void restart(void)
+{
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
+                                                            SCC_GSMRL_ENT);
+}
+#endif
+
+#endif  /* CONFIG_ETHER_ON_SCC && CFG_CMD_NET */
+
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
new file mode 100644
index 00000000000..78681cd1d29
--- /dev/null
+++ b/cpu/ppc4xx/kgdb.S
@@ -0,0 +1,78 @@
+/*
+ *  Copyright (C) 2000	Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <version.h>
+
+#define CONFIG_405GP 1		/* needed for Linux kernel header files */
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+ /*
+ * cache flushing routines for kgdb
+ */
+
+	.globl	kgdb_flush_cache_all
+kgdb_flush_cache_all:
+	/* icache */
+	iccci   r0,r0		/* iccci invalidates the entire I cache */
+	/* dcache */
+	addi    r6,0,0x0000     /* clear GPR 6 */
+        addi    r7,r0, 128 	/* do loop for # of dcache lines */
+				/* NOTE: dccci invalidates both */
+        mtctr   r7              /* ways in the D cache */
+..dcloop:
+        dccci   0,r6            /* invalidate line */
+        addi    r6,r6, 32	/* bump to next line */
+        bdnz    ..dcloop
+	blr
+
+	.globl	kgdb_flush_cache_range
+kgdb_flush_cache_range:
+	li	r5,CFG_CACHELINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,CFG_CACHELINE_SHIFT
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,CFG_CACHELINE_SIZE
+	bdnz	1b
+	sync			/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,CFG_CACHELINE_SIZE
+	bdnz	2b
+	SYNC
+	blr
+
+#endif /* CFG_CMD_KGDB */
diff --git a/cpu/ppc4xx/resetvec.S b/cpu/ppc4xx/resetvec.S
new file mode 100644
index 00000000000..53502254dc3
--- /dev/null
+++ b/cpu/ppc4xx/resetvec.S
@@ -0,0 +1,10 @@
+/* Copyright MontaVista Software Incorporated, 2000 */
+
+
+	.section .resetvec,"ax"
+#if defined(CONFIG_440)
+	b _start_440
+#else
+	b _start
+#endif
+
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
new file mode 100644
index 00000000000..d02ff2fa692
--- /dev/null
+++ b/cpu/ppc4xx/serial.c
@@ -0,0 +1,808 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*------------------------------------------------------------------------------+ */
+/*
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis.  Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications.  No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT   I B M   CORPORATION 1995
+ * LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+ */
+/*------------------------------------------------------------------------------- */
+
+#include <common.h>
+#include <commproc.h>
+#include <asm/processor.h>
+#include <watchdog.h>
+#include "vecnum.h"
+
+#if CONFIG_SERIAL_SOFTWARE_FIFO
+#include <malloc.h>
+#endif
+
+/*****************************************************************************/
+#ifdef CONFIG_IOP480
+
+#define SPU_BASE         0x40000000
+
+#define spu_LineStat_rc  0x00	/* Line Status Register (Read/Clear) */
+#define spu_LineStat_w   0x04	/* Line Status Register (Set) */
+#define spu_Handshk_rc   0x08	/* Handshake Status Register (Read/Clear) */
+#define spu_Handshk_w    0x0c	/* Handshake Status Register (Set) */
+#define spu_BRateDivh    0x10	/* Baud rate divisor high */
+#define spu_BRateDivl    0x14	/* Baud rate divisor low */
+#define spu_CtlReg       0x18	/* Control Register */
+#define spu_RxCmd        0x1c	/* Rx Command Register */
+#define spu_TxCmd        0x20	/* Tx Command Register */
+#define spu_RxBuff       0x24	/* Rx data buffer */
+#define spu_TxBuff       0x24	/* Tx data buffer */
+
+/*-----------------------------------------------------------------------------+
+  | Line Status Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncLSRport1           0x40000000
+#define asyncLSRport1set        0x40000004
+#define asyncLSRDataReady             0x80
+#define asyncLSRFramingError          0x40
+#define asyncLSROverrunError          0x20
+#define asyncLSRParityError           0x10
+#define asyncLSRBreakInterrupt        0x08
+#define asyncLSRTxHoldEmpty           0x04
+#define asyncLSRTxShiftEmpty          0x02
+
+/*-----------------------------------------------------------------------------+
+  | Handshake Status Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncHSRport1           0x40000008
+#define asyncHSRport1set        0x4000000c
+#define asyncHSRDsr                   0x80
+#define asyncLSRCts                   0x40
+
+/*-----------------------------------------------------------------------------+
+  | Control Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncCRport1            0x40000018
+#define asyncCRNormal                 0x00
+#define asyncCRLoopback               0x40
+#define asyncCRAutoEcho               0x80
+#define asyncCRDtr                    0x20
+#define asyncCRRts                    0x10
+#define asyncCRWordLength7            0x00
+#define asyncCRWordLength8            0x08
+#define asyncCRParityDisable          0x00
+#define asyncCRParityEnable           0x04
+#define asyncCREvenParity             0x00
+#define asyncCROddParity              0x02
+#define asyncCRStopBitsOne            0x00
+#define asyncCRStopBitsTwo            0x01
+#define asyncCRDisableDtrRts          0x00
+
+/*-----------------------------------------------------------------------------+
+  | Receiver Command Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncRCRport1           0x4000001c
+#define asyncRCRDisable               0x00
+#define asyncRCREnable                0x80
+#define asyncRCRIntDisable            0x00
+#define asyncRCRIntEnabled            0x20
+#define asyncRCRDMACh2                0x40
+#define asyncRCRDMACh3                0x60
+#define asyncRCRErrorInt              0x10
+#define asyncRCRPauseEnable           0x08
+
+/*-----------------------------------------------------------------------------+
+  | Transmitter Command Register.
+  +-----------------------------------------------------------------------------*/
+#define asyncTCRport1           0x40000020
+#define asyncTCRDisable               0x00
+#define asyncTCREnable                0x80
+#define asyncTCRIntDisable            0x00
+#define asyncTCRIntEnabled            0x20
+#define asyncTCRDMACh2                0x40
+#define asyncTCRDMACh3                0x60
+#define asyncTCRTxEmpty               0x10
+#define asyncTCRErrorInt              0x08
+#define asyncTCRStopPause             0x04
+#define asyncTCRBreakGen              0x02
+
+/*-----------------------------------------------------------------------------+
+  | Miscellanies defines.
+  +-----------------------------------------------------------------------------*/
+#define asyncTxBufferport1      0x40000024
+#define asyncRxBufferport1      0x40000024
+#define asyncDLABLsbport1       0x40000014
+#define asyncDLABMsbport1       0x40000010
+#define asyncXOFFchar                 0x13
+#define asyncXONchar                  0x11
+
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+int serial_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile char val;
+	unsigned short br_reg;
+
+	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+	/*
+	 * Init onboard UART
+	 */
+	out8 (SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
+	out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
+	out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
+	out8 (SPU_BASE + spu_CtlReg, 0x08);	/* Set 8 bits, no parity and 1 stop bit */
+	out8 (SPU_BASE + spu_RxCmd, 0xb0);	/* Enable Rx */
+	out8 (SPU_BASE + spu_TxCmd, 0x9c);	/* Enable Tx */
+	out8 (SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
+	val = in8 (SPU_BASE + spu_RxBuff);	/* Dummy read, to clear receiver */
+
+	return (0);
+}
+
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned short br_reg;
+
+	br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
+
+	out8 (SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
+	out8 (SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
+}
+
+
+void serial_putc (const char c)
+{
+	if (c == '\n')
+		serial_putc ('\r');
+
+	/* load status from handshake register */
+	if (in8 (SPU_BASE + spu_Handshk_rc) != 00)
+		out8 (SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
+
+	out8 (SPU_BASE + spu_TxBuff, c);	/* Put char */
+
+	while ((in8 (SPU_BASE + spu_LineStat_rc) & 04) != 04) {
+		if (in8 (SPU_BASE + spu_Handshk_rc) != 00)
+			out8 (SPU_BASE + spu_Handshk_rc, 0xff);	/* Clear Handshake */
+	}
+}
+
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+
+int serial_getc ()
+{
+	unsigned char status = 0;
+
+	while (1) {
+		status = in8 (asyncLSRport1);
+		if ((status & asyncLSRDataReady) != 0x0) {
+			break;
+		}
+		if ((status & ( asyncLSRFramingError |
+				asyncLSROverrunError |
+				asyncLSRParityError  |
+				asyncLSRBreakInterrupt )) != 0) {
+			(void) out8 (asyncLSRport1,
+				     asyncLSRFramingError |
+				     asyncLSROverrunError |
+				     asyncLSRParityError  |
+				     asyncLSRBreakInterrupt );
+		}
+	}
+	return (0x000000ff & (int) in8 (asyncRxBufferport1));
+}
+
+
+int serial_tstc ()
+{
+	unsigned char status;
+
+	status = in8 (asyncLSRport1);
+	if ((status & asyncLSRDataReady) != 0x0) {
+		return (1);
+	}
+	if ((status & ( asyncLSRFramingError |
+			asyncLSROverrunError |
+			asyncLSRParityError  |
+			asyncLSRBreakInterrupt )) != 0) {
+		(void) out8 (asyncLSRport1,
+			     asyncLSRFramingError |
+			     asyncLSROverrunError |
+			     asyncLSRParityError  |
+			     asyncLSRBreakInterrupt);
+	}
+	return 0;
+}
+
+#endif	/* CONFIG_IOP480 */
+
+
+/*****************************************************************************/
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440)
+
+#if defined(CONFIG_440)
+#define UART0_BASE  CFG_PERIPHERAL_BASE + 0x00000200
+#define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000300
+#define CR0_MASK        0x3fff0000
+#define CR0_EXTCLK_ENA  0x00600000
+#define CR0_UDIV_POS    16
+#else
+#define UART_BASE_PTR   0xF800FFFC;	/* pointer to uart base */
+#define UART0_BASE      0xef600300
+#define UART1_BASE      0xef600400
+#define CR0_MASK        0x00001fff
+#define CR0_EXTCLK_ENA  0x00000c00
+#define CR0_UDIV_POS    1
+#endif
+
+#define UART_RBR    0x00
+#define UART_THR    0x00
+#define UART_IER    0x01
+#define UART_IIR    0x02
+#define UART_FCR    0x02
+#define UART_LCR    0x03
+#define UART_MCR    0x04
+#define UART_LSR    0x05
+#define UART_MSR    0x06
+#define UART_SCR    0x07
+#define UART_DLL    0x00
+#define UART_DLM    0x01
+
+/*-----------------------------------------------------------------------------+
+  | Line Status Register.
+  +-----------------------------------------------------------------------------*/
+/*#define asyncLSRport1           UART0_BASE+0x05 */
+#define asyncLSRDataReady1            0x01
+#define asyncLSROverrunError1         0x02
+#define asyncLSRParityError1          0x04
+#define asyncLSRFramingError1         0x08
+#define asyncLSRBreakInterrupt1       0x10
+#define asyncLSRTxHoldEmpty1          0x20
+#define asyncLSRTxShiftEmpty1         0x40
+#define asyncLSRRxFifoError1          0x80
+
+/*-----------------------------------------------------------------------------+
+  | Miscellanies defines.
+  +-----------------------------------------------------------------------------*/
+/*#define asyncTxBufferport1      UART0_BASE+0x00 */
+/*#define asyncRxBufferport1      UART0_BASE+0x00 */
+
+
+#if CONFIG_SERIAL_SOFTWARE_FIFO
+/*-----------------------------------------------------------------------------+
+  | Fifo
+  +-----------------------------------------------------------------------------*/
+typedef struct {
+	char *rx_buffer;
+	ulong rx_put;
+	ulong rx_get;
+} serial_buffer_t;
+
+volatile static serial_buffer_t buf_info;
+#endif
+
+
+#if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK)
+static void serial_divs (int baudrate, unsigned long *pudiv,
+			 unsigned short *pbdiv )
+{
+	sys_info_t	sysinfo;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;    /* smallest diff */
+	unsigned long udiv;     /* best udiv */
+
+	unsigned short idiff;   /* current diff */
+	unsigned short ibdiv;   /* current bdiv */
+	unsigned long i;
+	unsigned long est;      /* current estimate */
+
+	get_sys_info( &sysinfo );
+
+	udiv = 32;     /* Assume lowest possible serial clk */
+	div = sysinfo.freqPLB/(16*baudrate); /* total divisor */
+	umin = sysinfo.pllOpbDiv<<1; /* 2 x OPB divisor */
+	diff = 32;      /* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (32) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for( i = 32; i > umin; i-- ){
+		ibdiv = div/i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if( idiff == 0 ){
+			udiv = i;
+			break;      /* can't do better */
+		}
+		else if( idiff < diff ){
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+
+	*pudiv = udiv;
+	*pbdiv = div/udiv;
+
+}
+#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK */
+
+
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+#if defined(CONFIG_440)
+int serial_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned long reg;
+	unsigned long udiv;
+	unsigned short bdiv;
+	volatile char val;
+#ifdef CFG_EXT_SERIAL_CLOCK
+	unsigned long tmp;
+#endif
+
+	reg = mfdcr(cntrl0) & ~CR0_MASK;
+#ifdef CFG_EXT_SERIAL_CLOCK
+	reg |= CR0_EXTCLK_ENA;
+	udiv = 1;
+	tmp  = gd->baudrate * 16;
+	bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+#else
+	/* For 440, the cpu clock is on divider chain A, UART on divider
+	 * chain B ... so cpu clock is irrelevant. Get the "optimized"
+	 * values that are subject to the 1/2 opb clock constraint
+	 */
+	serial_divs (gd->baudrate, &udiv, &bdiv);
+#endif
+
+	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
+	mtdcr (cntrl0, reg);
+
+	out8 (UART0_BASE + UART_LCR, 0x80);	/* set DLAB bit */
+	out8 (UART0_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
+	out8 (UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
+	out8 (UART0_BASE + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out8 (UART0_BASE + UART_FCR, 0x00);	/* disable FIFO */
+	out8 (UART0_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
+	val = in8 (UART0_BASE + UART_LSR);	/* clear line status */
+	val = in8 (UART0_BASE + UART_RBR);	/* read receive buffer */
+	out8 (UART0_BASE + UART_SCR, 0x00);	/* set scratchpad */
+	out8 (UART0_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
+
+	return (0);
+}
+
+#else /* !defined(CONFIG_440) */
+
+int serial_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned long reg;
+	unsigned long tmp;
+	unsigned long clk;
+	unsigned long udiv;
+	unsigned short bdiv;
+	volatile char val;
+
+	reg = mfdcr(cntrl0) & ~CR0_MASK;
+#ifdef CFG_EXT_SERIAL_CLOCK
+	clk = CFG_EXT_SERIAL_CLOCK;
+	udiv = 1;
+	reg |= CR0_EXTCLK_ENA;
+#else
+	clk = gd->cpu_clk;
+#ifdef CFG_405_UART_ERRATA_59
+	udiv = 31;			/* Errata 59: stuck at 31 */
+#else
+	tmp = CFG_BASE_BAUD * 16;
+	udiv = (clk + tmp / 2) / tmp;
+#endif
+#endif
+
+	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
+	mtdcr (cntrl0, reg);
+
+	tmp = gd->baudrate * udiv * 16;
+	bdiv = (clk + tmp / 2) / tmp;
+
+	out8 (UART0_BASE + UART_LCR, 0x80);	/* set DLAB bit */
+	out8 (UART0_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
+	out8 (UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
+	out8 (UART0_BASE + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+	out8 (UART0_BASE + UART_FCR, 0x00);	/* disable FIFO */
+	out8 (UART0_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
+	val = in8 (UART0_BASE + UART_LSR);	/* clear line status */
+	val = in8 (UART0_BASE + UART_RBR);	/* read receive buffer */
+	out8 (UART0_BASE + UART_SCR, 0x00);	/* set scratchpad */
+	out8 (UART0_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
+
+	return (0);
+}
+
+#endif /* if defined(CONFIG_440) */
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned long tmp;
+	unsigned long clk;
+	unsigned long udiv;
+	unsigned short bdiv;
+
+#ifdef CFG_EXT_SERIAL_CLOCK
+	clk = CFG_EXT_SERIAL_CLOCK;
+#else
+	clk = gd->cpu_clk;
+#endif
+	udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
+	tmp = gd->baudrate * udiv * 16;
+	bdiv = (clk + tmp / 2) / tmp;
+
+	out8 (UART0_BASE + UART_LCR, 0x80);	/* set DLAB bit */
+	out8 (UART0_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
+	out8 (UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
+	out8 (UART0_BASE + UART_LCR, 0x03);	/* clear DLAB; set 8 bits, no parity */
+}
+
+
+void serial_putc (const char c)
+{
+	int i;
+
+	if (c == '\n')
+		serial_putc ('\r');
+
+	/* check THRE bit, wait for transmiter available */
+	for (i = 1; i < 3500; i++) {
+		if ((in8 (UART0_BASE + UART_LSR) & 0x20) == 0x20)
+			break;
+		udelay (100);
+	}
+	out8 (UART0_BASE + UART_THR, c);	/* put character out */
+}
+
+
+void serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+
+int serial_getc ()
+{
+	unsigned char status = 0;
+
+	while (1) {
+#if defined(CONFIG_HW_WATCHDOG)
+		WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
+#endif	/* CONFIG_HW_WATCHDOG */
+		status = in8 (UART0_BASE + UART_LSR);
+		if ((status & asyncLSRDataReady1) != 0x0) {
+			break;
+		}
+		if ((status & ( asyncLSRFramingError1 |
+				asyncLSROverrunError1 |
+				asyncLSRParityError1  |
+				asyncLSRBreakInterrupt1 )) != 0) {
+			out8 (UART0_BASE + UART_LSR,
+			      asyncLSRFramingError1 |
+			      asyncLSROverrunError1 |
+			      asyncLSRParityError1  |
+			      asyncLSRBreakInterrupt1);
+		}
+	}
+	return (0x000000ff & (int) in8 (UART0_BASE));
+}
+
+
+int serial_tstc ()
+{
+	unsigned char status;
+
+	status = in8 (UART0_BASE + UART_LSR);
+	if ((status & asyncLSRDataReady1) != 0x0) {
+		return (1);
+	}
+	if ((status & ( asyncLSRFramingError1 |
+			asyncLSROverrunError1 |
+			asyncLSRParityError1  |
+			asyncLSRBreakInterrupt1 )) != 0) {
+		out8 (UART0_BASE + UART_LSR,
+		      asyncLSRFramingError1 |
+		      asyncLSROverrunError1 |
+		      asyncLSRParityError1  |
+		      asyncLSRBreakInterrupt1);
+	}
+	return 0;
+}
+
+
+#if CONFIG_SERIAL_SOFTWARE_FIFO
+
+void serial_isr (void *arg)
+{
+	int space;
+	int c;
+	const int rx_get = buf_info.rx_get;
+	int rx_put = buf_info.rx_put;
+
+	if (rx_get <= rx_put) {
+		space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+	} else {
+		space = rx_get - rx_put;
+	}
+	while (serial_tstc ()) {
+		c = serial_getc ();
+		if (space) {
+			buf_info.rx_buffer[rx_put++] = c;
+			space--;
+		}
+		if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
+			rx_put = 0;
+		if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
+			/* Stop flow by setting RTS inactive */
+			out8 (UART0_BASE + UART_MCR,
+			      in8 (UART0_BASE + UART_MCR) & (0xFF ^ 0x02));
+		}
+	}
+	buf_info.rx_put = rx_put;
+}
+
+void serial_buffered_init (void)
+{
+	serial_puts ("Switching to interrupt driven serial input mode.\n");
+	buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
+	buf_info.rx_put = 0;
+	buf_info.rx_get = 0;
+
+	if (in8 (UART0_BASE + UART_MSR) & 0x10) {
+		serial_puts ("Check CTS signal present on serial port: OK.\n");
+	} else {
+		serial_puts ("WARNING: CTS signal not present on serial port.\n");
+	}
+
+	irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
+			      serial_isr /*interrupt_handler_t *handler */ ,
+			      (void *) &buf_info /*void *arg */ );
+
+	/* Enable "RX Data Available" Interrupt on UART */
+	/* out8(UART0_BASE + UART_IER, in8(UART0_BASE + UART_IER) |0x01); */
+	out8 (UART0_BASE + UART_IER, 0x01);
+	/* Set DTR active */
+	out8 (UART0_BASE + UART_MCR, in8 (UART0_BASE + UART_MCR) | 0x01);
+	/* Start flow by setting RTS active */
+	out8 (UART0_BASE + UART_MCR, in8 (UART0_BASE + UART_MCR) | 0x02);
+	/* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
+	out8 (UART0_BASE + UART_FCR, (1 << 6) | 1);
+}
+
+void serial_buffered_putc (const char c)
+{
+	/* Wait for CTS */
+#if defined(CONFIG_HW_WATCHDOG)
+	while (!(in8 (UART0_BASE + UART_MSR) & 0x10))
+		WATCHDOG_RESET ();
+#else
+	while (!(in8 (UART0_BASE + UART_MSR) & 0x10));
+#endif
+	serial_putc (c);
+}
+
+void serial_buffered_puts (const char *s)
+{
+	serial_puts (s);
+}
+
+int serial_buffered_getc (void)
+{
+	int space;
+	int c;
+	int rx_get = buf_info.rx_get;
+	int rx_put;
+
+#if defined(CONFIG_HW_WATCHDOG)
+	while (rx_get == buf_info.rx_put)
+		WATCHDOG_RESET ();
+#else
+	while (rx_get == buf_info.rx_put);
+#endif
+	c = buf_info.rx_buffer[rx_get++];
+	if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
+		rx_get = 0;
+	buf_info.rx_get = rx_get;
+
+	rx_put = buf_info.rx_put;
+	if (rx_get <= rx_put) {
+		space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
+	} else {
+		space = rx_get - rx_put;
+	}
+	if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
+		/* Start flow by setting RTS active */
+		out8 (UART0_BASE + UART_MCR, in8 (UART0_BASE + UART_MCR) | 0x02);
+	}
+
+	return c;
+}
+
+int serial_buffered_tstc (void)
+{
+	return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
+}
+
+#endif	/* CONFIG_SERIAL_SOFTWARE_FIFO */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+/*
+  AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
+  number 0 or number 1
+  - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 :
+  configuration has been already done
+  - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 :
+  configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
+*/
+#if (CONFIG_KGDB_SER_INDEX & 2)
+void kgdb_serial_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile char val;
+	unsigned short br_reg;
+
+	get_clocks ();
+	br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
+		  5) / 10;
+	/*
+	 * Init onboard 16550 UART
+	 */
+	out8 (UART1_BASE + UART_LCR, 0x80);	/* set DLAB bit */
+	out8 (UART1_BASE + UART_DLL, (br_reg & 0x00ff));	/* set divisor for 9600 baud */
+	out8 (UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8));	/* set divisor for 9600 baud */
+	out8 (UART1_BASE + UART_LCR, 0x03);	/* line control 8 bits no parity */
+	out8 (UART1_BASE + UART_FCR, 0x00);	/* disable FIFO */
+	out8 (UART1_BASE + UART_MCR, 0x00);	/* no modem control DTR RTS */
+	val = in8 (UART1_BASE + UART_LSR);	/* clear line status */
+	val = in8 (UART1_BASE + UART_RBR);	/* read receive buffer */
+	out8 (UART1_BASE + UART_SCR, 0x00);	/* set scratchpad */
+	out8 (UART1_BASE + UART_IER, 0x00);	/* set interrupt enable reg */
+}
+
+
+void putDebugChar (const char c)
+{
+	if (c == '\n')
+		serial_putc ('\r');
+
+	out8 (UART1_BASE + UART_THR, c);	/* put character out */
+
+	/* check THRE bit, wait for transfer done */
+	while ((in8 (UART1_BASE + UART_LSR) & 0x20) != 0x20);
+}
+
+
+void putDebugStr (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+
+int getDebugChar (void)
+{
+	unsigned char status = 0;
+
+	while (1) {
+		status = in8 (UART1_BASE + UART_LSR);
+		if ((status & asyncLSRDataReady1) != 0x0) {
+			break;
+		}
+		if ((status & ( asyncLSRFramingError1 |
+				asyncLSROverrunError1 |
+				asyncLSRParityError1  |
+				asyncLSRBreakInterrupt1 )) != 0) {
+			out8 (UART1_BASE + UART_LSR,
+			      asyncLSRFramingError1 |
+			      asyncLSROverrunError1 |
+			      asyncLSRParityError1  |
+			      asyncLSRBreakInterrupt1);
+		}
+	}
+	return (0x000000ff & (int) in8 (UART1_BASE));
+}
+
+
+void kgdb_interruptible (int yes)
+{
+	return;
+}
+
+#else	/* ! (CONFIG_KGDB_SER_INDEX & 2) */
+
+void kgdb_serial_init (void)
+{
+	serial_printf ("[on serial] ");
+}
+
+void putDebugChar (int c)
+{
+	serial_putc (c);
+}
+
+void putDebugStr (const char *str)
+{
+	serial_puts (str);
+}
+
+int getDebugChar (void)
+{
+	return serial_getc ();
+}
+
+void kgdb_interruptible (int yes)
+{
+	return;
+}
+#endif	/* (CONFIG_KGDB_SER_INDEX & 2) */
+#endif	/* CFG_CMD_KGDB */
+
+#endif	/* CONFIG_405GP || CONFIG_405CR */
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
new file mode 100644
index 00000000000..fc0c980c73b
--- /dev/null
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -0,0 +1,1764 @@
+/*
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson Business Innovation.
+ * kenneth.johansson@inn.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for IBM 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+
+#ifdef CONFIG_SPD_EEPROM
+
+/*
+ * Set default values
+ */
+#ifndef	CFG_I2C_SPEED
+#define	CFG_I2C_SPEED	50000
+#endif
+
+#ifndef	CFG_I2C_SLAVE
+#define	CFG_I2C_SLAVE	0xFE
+#endif
+
+#ifndef  CONFIG_440              /* for 405 WALNUT board */
+
+#define  SDRAM0_CFG_DCE          0x80000000
+#define  SDRAM0_CFG_SRE          0x40000000
+#define  SDRAM0_CFG_PME          0x20000000
+#define  SDRAM0_CFG_MEMCHK       0x10000000
+#define  SDRAM0_CFG_REGEN        0x08000000
+#define  SDRAM0_CFG_ECCDD        0x00400000
+#define  SDRAM0_CFG_EMDULR       0x00200000
+#define  SDRAM0_CFG_DRW_SHIFT    (31-6)
+#define  SDRAM0_CFG_BRPF_SHIFT   (31-8)
+
+#define  SDRAM0_TR_CASL_SHIFT    (31-8)
+#define  SDRAM0_TR_PTA_SHIFT     (31-13)
+#define  SDRAM0_TR_CTP_SHIFT     (31-15)
+#define  SDRAM0_TR_LDF_SHIFT     (31-17)
+#define  SDRAM0_TR_RFTA_SHIFT    (31-29)
+#define  SDRAM0_TR_RCD_SHIFT     (31-31)
+
+#define  SDRAM0_RTR_SHIFT        (31-15)
+#define  SDRAM0_ECCCFG_SHIFT     (31-11)
+
+/* SDRAM0_CFG enable macro  */
+#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
+
+#define SDRAM0_BXCR_SZ_MASK  0x000e0000
+#define SDRAM0_BXCR_AM_MASK  0x0000e000
+
+#define SDRAM0_BXCR_SZ_SHIFT (31-14)
+#define SDRAM0_BXCR_AM_SHIFT (31-18)
+
+#define SDRAM0_BXCR_SZ(x)  ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
+#define SDRAM0_BXCR_AM(x)  ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
+
+#ifdef CONFIG_W7O
+# define SPD_ERR(x) do { return 0; } while (0)
+#else
+# define SPD_ERR(x) do { printf(x); hang(); } while (0)
+#endif
+
+/*
+ * what we really want is
+ * (1/hertz) but we don't want to use floats so multiply with 10E9
+ *
+ * The error needs to be on the safe side so we want the floor function.
+ * This means we get an exact value or we calculate that our bus frequency is
+ * a bit faster than it really is and thus we don't progam the sdram controller
+ * to run to fast
+ */
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+
+/* function prototypes */
+int spd_read(uint addr);			/* prototype */
+
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the IBM walnut has.
+ *
+ * BUG: Don't handle ECC memory
+ * BUG: A few values in the TR register is currently hardcoded
+ */
+
+long int spd_sdram(void)
+{
+	int bus_period,tmp,row,col;
+	int total_size,bank_size,bank_code;
+	int ecc_on;
+	int mode = 4;
+	int bank_cnt = 1;
+
+	int sdram0_pmit=0x07c00000;
+	int sdram0_besr0=-1;
+	int sdram0_besr1=-1;
+	int sdram0_eccesr=-1;
+	int sdram0_ecccfg;
+
+	int sdram0_rtr=0;
+	int sdram0_tr=0;
+
+	int sdram0_b0cr;
+	int sdram0_b1cr;
+	int sdram0_b2cr;
+	int sdram0_b3cr;
+
+	int sdram0_cfg=0;
+
+	int t_rp;
+	int t_rcd;
+	int t_rc = 70; /* This value not available in SPD_EEPROM */
+	int min_cas = 2;
+
+	/*
+	 * Make sure I2C controller is initialized
+	 * before continuing.
+	 */
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/*
+	 * Calculate the bus period, we do it this
+	 * way to minimize stack utilization.
+	 */
+    	tmp = (mfdcr(pllmd) >> (31-6)) & 0xf;	/* get FBDV bits */
+	tmp = CONFIG_SYS_CLK_FREQ * tmp;	/* get plb freq */
+	bus_period = sdram_HZ_to_ns(tmp);	/* get sdram speed */
+
+     	/* Make shure we are using SDRAM */
+	if (spd_read(2) != 0x04){
+          SPD_ERR("SDRAM - non SDRAM memory module found\n");
+     	  }
+
+/*------------------------------------------------------------------
+  configure memory timing register
+
+  data from DIMM:
+  27	IN Row Precharge Time ( t RP)
+  29	MIN RAS to CAS Delay ( t RCD)
+  127   Component and Clock Detail ,clk0-clk3, junction temp, CAS
+  -------------------------------------------------------------------*/
+
+     /*
+      * first figure out which cas latency mode to use
+      * use the min supported mode
+      */
+
+	tmp = spd_read(127) & 0x6;
+     if(tmp == 0x02){      	   /* only cas = 2 supported */
+     	  min_cas = 2;
+/*     	  t_ck = spd_read(9); */
+/*     	  t_ac = spd_read(10); */
+	  }
+     else if (tmp == 0x04){         /* only cas = 3 supported */
+     	  min_cas = 3;
+/*     	  t_ck = spd_read(9); */
+/*     	  t_ac = spd_read(10); */
+	  }
+     else if (tmp == 0x06){         /* 2,3 supported, so use 2 */
+     	  min_cas = 2;
+/*     	  t_ck = spd_read(23); */
+/*     	  t_ac = spd_read(24); */
+	  }
+     else {
+	     SPD_ERR("SDRAM - unsupported CAS latency \n");
+	}
+
+     /* get some timing values, t_rp,t_rcd
+     */
+     t_rp = spd_read(27);
+     t_rcd = spd_read(29);
+
+
+     /* The following timing calcs subtract 1 before deviding.
+      * this has effect of using ceiling intead of floor rounding,
+      * and also subtracting 1 to convert number to reg value
+      */
+     /* set up CASL */
+     sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+     /* set up PTA */
+     sdram0_tr |= (((t_rp - 1)/bus_period) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+     /* set up CTP */
+     tmp = ((t_rc - t_rcd - t_rp -1) / bus_period) & 0x3;
+     if(tmp<1) SPD_ERR("SDRAM - unsupported prech to act time (Trp)\n");
+     sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+     /* set LDF	= 2 cycles, reg value = 1 */
+     sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+     /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+	tmp = ((t_rc - 1) / bus_period)-4;
+	if(tmp<0)tmp=0;
+	if(tmp>6)tmp=6;
+	sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
+     /* set RCD = t_rcd/bus_period*/
+     sdram0_tr |= (((t_rcd - 1) / bus_period) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+
+
+/*------------------------------------------------------------------
+  configure RTR register
+  -------------------------------------------------------------------*/
+     row = spd_read(3);
+     col = spd_read(4);
+     tmp = spd_read(12) & 0x7f ; /* refresh type less self refresh bit */
+     switch(tmp){
+	case 0x00:
+	  tmp=15625;
+	  break;
+	case 0x01:
+	  tmp=15625/4;
+	  break;
+	case 0x02:
+	  tmp=15625/2;
+	  break;
+	case 0x03:
+	  tmp=15625*2;
+	  break;
+	case 0x04:
+	  tmp=15625*4;
+	  break;
+	case 0x05:
+	  tmp=15625*8;
+	  break;
+	default:
+     	  SPD_ERR("SDRAM - Bad refresh period \n");
+	}
+	/* convert from nsec to bus cycles */
+	tmp = tmp/bus_period;
+	sdram0_rtr = (tmp & 0x3ff8)<<  SDRAM0_RTR_SHIFT;
+
+/*------------------------------------------------------------------
+  determine the number of banks used
+  -------------------------------------------------------------------*/
+	/* byte 7:6 is module data width */
+	if(spd_read(7) != 0)
+	    SPD_ERR("SDRAM - unsupported module width\n");
+	tmp = spd_read(6);
+	if (tmp < 32)
+	    SPD_ERR("SDRAM - unsupported module width\n");
+	else if (tmp < 64)
+	    bank_cnt=1;		/* one bank per sdram side */
+	else if (tmp < 73)
+	    bank_cnt=2;	/* need two banks per side */
+	else if (tmp < 161)
+	    bank_cnt=4;	/* need four banks per side */
+	else
+	    SPD_ERR("SDRAM - unsupported module width\n");
+
+	/* byte 5 is the module row count (refered to as dimm "sides") */
+	tmp = spd_read(5);
+	if(tmp==1);
+	else if(tmp==2) bank_cnt *=2;
+	else if(tmp==4) bank_cnt *=4;
+	else bank_cnt = 8; 		/* 8 is an error code */
+
+	if(bank_cnt > 4)	/* we only have 4 banks to work with */
+	    SPD_ERR("SDRAM - unsupported module rows for this width\n");
+
+	/* now check for ECC ability of module. We only support ECC
+	 *   on 32 bit wide devices with 8 bit ECC.
+	 */
+	if ( (spd_read(11)==2) && ((spd_read(6)==40) || (spd_read(14)==8)) ){
+	   sdram0_ecccfg=0xf<<SDRAM0_ECCCFG_SHIFT;
+	   ecc_on = 1;
+   	}
+	else{
+	   sdram0_ecccfg=0;
+	   ecc_on = 0;
+   	}
+
+/*------------------------------------------------------------------
+	calculate total size
+  -------------------------------------------------------------------*/
+	/* calculate total size and do sanity check */
+	tmp = spd_read(31);
+	total_size=1<<22;	/* total_size = 4MB */
+	/* now multiply 4M by the smallest device roe density */
+	/* note that we don't support asymetric rows */
+	while (((tmp & 0x0001) == 0) && (tmp != 0)){
+	    total_size= total_size<<1;
+	    tmp = tmp>>1;
+	    }
+	total_size *= spd_read(5);	/* mult by module rows (dimm sides) */
+
+/*------------------------------------------------------------------
+	map  rows * cols * banks to a mode
+ -------------------------------------------------------------------*/
+
+	switch( row )
+	{
+	case 11:
+		switch ( col )
+		{
+		case 8:
+			mode=4; /* mode 5 */
+			break;
+		case 9:
+		case 10:
+			mode=0; /* mode 1 */
+			break;
+		default:
+	     	SPD_ERR("SDRAM - unsupported mode\n");
+		}
+		break;
+	case 12:
+		switch ( col )
+		{
+		case 8:
+			mode=3; /* mode 4 */
+			break;
+		case 9:
+		case 10:
+			mode=1; /* mode 2 */
+			break;
+		default:
+	     	SPD_ERR("SDRAM - unsupported mode\n");
+		}
+		break;
+	case 13:
+		switch ( col )
+		{
+		case 8:
+			mode=5; /* mode 6 */
+			break;
+		case 9:
+		case 10:
+			if (spd_read(17) ==2 )
+				mode=6; /* mode 7 */
+			else
+				mode=2; /* mode 3 */
+			break;
+		case 11:
+			mode=2; /* mode 3 */
+			break;
+		default:
+	     	SPD_ERR("SDRAM - unsupported mode\n");
+		}
+		break;
+	default:
+	     SPD_ERR("SDRAM - unsupported mode\n");
+	}
+
+/*------------------------------------------------------------------
+	using the calculated values, compute the bank
+	config register values.
+ -------------------------------------------------------------------*/
+	sdram0_b1cr = 0;
+	sdram0_b2cr = 0;
+	sdram0_b3cr = 0;
+
+	/* compute the size of each bank */
+	bank_size = total_size / bank_cnt;
+	/* convert bank size to bank size code for ppc4xx
+		by takeing log2(bank_size) - 22 */
+	tmp=bank_size; 		/* start with tmp = bank_size */
+	bank_code=0;			/* and bank_code = 0 */
+	while (tmp>1){ 		/* this takes log2 of tmp */
+		bank_code++;		/* and stores result in bank_code */
+		tmp=tmp>>1;
+		}				/* bank_code is now log2(bank_size) */
+	bank_code-=22;				/* subtract 22 to get the code */
+
+	tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
+    	sdram0_b0cr = (bank_size) * 0 | tmp;
+    	if(bank_cnt>1) sdram0_b2cr = (bank_size) * 1 | tmp;
+    	if(bank_cnt>2) sdram0_b1cr = (bank_size) * 2 | tmp;
+    	if(bank_cnt>3) sdram0_b3cr = (bank_size) * 3 | tmp;
+
+
+	/*
+	 *   enable sdram controller DCE=1
+	 *  enable burst read prefetch to 32 bytes BRPF=2
+	 *  leave other functions off
+	 */
+
+/*------------------------------------------------------------------
+	now that we've done our calculations, we are ready to
+	program all the registers.
+ -------------------------------------------------------------------*/
+
+
+#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+	/* disable memcontroller so updates work */
+	sdram0_cfg = 0;
+	mtsdram0( mem_mcopt1, sdram0_cfg );
+
+	mtsdram0( mem_besra , sdram0_besr0 );
+	mtsdram0( mem_besrb , sdram0_besr1 );
+	mtsdram0( mem_rtr   , sdram0_rtr );
+	mtsdram0( mem_pmit  , sdram0_pmit );
+	mtsdram0( mem_mb0cf , sdram0_b0cr );
+	mtsdram0( mem_mb1cf , sdram0_b1cr );
+	mtsdram0( mem_mb2cf , sdram0_b2cr );
+	mtsdram0( mem_mb3cf , sdram0_b3cr );
+	mtsdram0( mem_sdtr1 , sdram0_tr );
+	mtsdram0( mem_ecccf , sdram0_ecccfg );
+	mtsdram0( mem_eccerr, sdram0_eccesr );
+
+	/* SDRAM have a power on delay,  500 micro should do */
+	udelay(500);
+	sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
+	if(ecc_on) sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+	mtsdram0( mem_mcopt1, sdram0_cfg );
+
+
+	/* kernel 2.4.2 from mvista has a bug with memory over 128MB */
+#ifdef MVISTA_MEM_BUG
+	if (total_size > 128*1024*1024 )
+		total_size=128*1024*1024;
+#endif
+	return (total_size);
+}
+
+int spd_read(uint addr)
+{
+	char data[2];
+
+	if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
+		return (int)data[0];
+	else
+		return 0;
+}
+
+#else                             /* CONFIG_440 */
+
+/*-----------------------------------------------------------------------------
+|  Memory Controller Options 0
++-----------------------------------------------------------------------------*/
+#define SDRAM_CFG0_DCEN           0x80000000  /* SDRAM Controller Enable      */
+#define SDRAM_CFG0_MCHK_MASK      0x30000000  /* Memory data errchecking mask */
+#define SDRAM_CFG0_MCHK_NON       0x00000000  /* No ECC generation            */
+#define SDRAM_CFG0_MCHK_GEN       0x20000000  /* ECC generation               */
+#define SDRAM_CFG0_MCHK_CHK       0x30000000  /* ECC generation and checking  */
+#define SDRAM_CFG0_RDEN           0x08000000  /* Registered DIMM enable       */
+#define SDRAM_CFG0_PMUD           0x04000000  /* Page management unit         */
+#define SDRAM_CFG0_DMWD_MASK      0x02000000  /* DRAM width mask              */
+#define SDRAM_CFG0_DMWD_32        0x00000000  /* 32 bits                      */
+#define SDRAM_CFG0_DMWD_64        0x02000000  /* 64 bits                      */
+#define SDRAM_CFG0_UIOS_MASK      0x00C00000  /* Unused IO State              */
+#define SDRAM_CFG0_PDP            0x00200000  /* Page deallocation policy     */
+
+/*-----------------------------------------------------------------------------
+|  Memory Controller Options 1
++-----------------------------------------------------------------------------*/
+#define SDRAM_CFG1_SRE            0x80000000  /* Self-Refresh Entry           */
+#define SDRAM_CFG1_PMEN           0x40000000  /* Power Management Enable      */
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM DEVPOT Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_DEVOPT_DLL          0x80000000
+#define SDRAM_DEVOPT_DS           0x40000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM MCSTS Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTS_MRSC          0x80000000
+#define SDRAM_MCSTS_SRMS          0x40000000
+#define SDRAM_MCSTS_CIS           0x20000000
+
+/*-----------------------------------------------------------------------------
+|  SDRAM Refresh Timer Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK       0xFFFF0000
+#define SDRAM_RTR_RINT_ENCODE(n)  (((n) << 16) & SDRAM_RTR_RINT_MASK)
+#define sdram_HZ_to_ns(hertz)     (1000000000/(hertz))
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM UABus Base Address Reg
++-----------------------------------------------------------------------------*/
+#define SDRAM_UABBA_UBBA_MASK     0x0000000F
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-7 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_BXCR_SDBA_MASK      0xff800000      /* Base address             */
+#define SDRAM_BXCR_SDSZ_MASK      0x000e0000      /* Size                     */
+#define SDRAM_BXCR_SDSZ_8         0x00020000      /*   8M                     */
+#define SDRAM_BXCR_SDSZ_16        0x00040000      /*  16M                     */
+#define SDRAM_BXCR_SDSZ_32        0x00060000      /*  32M                     */
+#define SDRAM_BXCR_SDSZ_64        0x00080000      /*  64M                     */
+#define SDRAM_BXCR_SDSZ_128       0x000a0000      /* 128M                     */
+#define SDRAM_BXCR_SDSZ_256       0x000c0000      /* 256M                     */
+#define SDRAM_BXCR_SDSZ_512       0x000e0000      /* 512M                     */
+#define SDRAM_BXCR_SDAM_MASK      0x0000e000      /* Addressing mode          */
+#define SDRAM_BXCR_SDAM_1         0x00000000      /*   Mode 1                 */
+#define SDRAM_BXCR_SDAM_2         0x00002000      /*   Mode 2                 */
+#define SDRAM_BXCR_SDAM_3         0x00004000      /*   Mode 3                 */
+#define SDRAM_BXCR_SDAM_4         0x00006000      /*   Mode 4                 */
+#define SDRAM_BXCR_SDBE           0x00000001      /* Memory Bank Enable       */
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM TR0 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_TR0_SDWR_MASK       0x80000000
+#define   SDRAM_TR0_SDWR_2_CLK    0x00000000
+#define   SDRAM_TR0_SDWR_3_CLK    0x80000000
+#define SDRAM_TR0_SDWD_MASK       0x40000000
+#define   SDRAM_TR0_SDWD_0_CLK    0x00000000
+#define   SDRAM_TR0_SDWD_1_CLK    0x40000000
+#define SDRAM_TR0_SDCL_MASK       0x01800000
+#define   SDRAM_TR0_SDCL_2_0_CLK  0x00800000
+#define   SDRAM_TR0_SDCL_2_5_CLK  0x01000000
+#define   SDRAM_TR0_SDCL_3_0_CLK  0x01800000
+#define SDRAM_TR0_SDPA_MASK       0x000C0000
+#define   SDRAM_TR0_SDPA_2_CLK    0x00040000
+#define   SDRAM_TR0_SDPA_3_CLK    0x00080000
+#define   SDRAM_TR0_SDPA_4_CLK    0x000C0000
+#define SDRAM_TR0_SDCP_MASK       0x00030000
+#define   SDRAM_TR0_SDCP_2_CLK    0x00000000
+#define   SDRAM_TR0_SDCP_3_CLK    0x00010000
+#define   SDRAM_TR0_SDCP_4_CLK    0x00020000
+#define   SDRAM_TR0_SDCP_5_CLK    0x00030000
+#define SDRAM_TR0_SDLD_MASK       0x0000C000
+#define   SDRAM_TR0_SDLD_1_CLK    0x00000000
+#define   SDRAM_TR0_SDLD_2_CLK    0x00004000
+#define SDRAM_TR0_SDRA_MASK       0x0000001C
+#define   SDRAM_TR0_SDRA_6_CLK    0x00000000
+#define   SDRAM_TR0_SDRA_7_CLK    0x00000004
+#define   SDRAM_TR0_SDRA_8_CLK    0x00000008
+#define   SDRAM_TR0_SDRA_9_CLK    0x0000000C
+#define   SDRAM_TR0_SDRA_10_CLK   0x00000010
+#define   SDRAM_TR0_SDRA_11_CLK   0x00000014
+#define   SDRAM_TR0_SDRA_12_CLK   0x00000018
+#define   SDRAM_TR0_SDRA_13_CLK   0x0000001C
+#define SDRAM_TR0_SDRD_MASK       0x00000003
+#define   SDRAM_TR0_SDRD_2_CLK    0x00000001
+#define   SDRAM_TR0_SDRD_3_CLK    0x00000002
+#define   SDRAM_TR0_SDRD_4_CLK    0x00000003
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM TR1 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_TR1_RDSS_MASK         0xC0000000
+#define   SDRAM_TR1_RDSS_TR0        0x00000000
+#define   SDRAM_TR1_RDSS_TR1        0x40000000
+#define   SDRAM_TR1_RDSS_TR2        0x80000000
+#define   SDRAM_TR1_RDSS_TR3        0xC0000000
+#define SDRAM_TR1_RDSL_MASK         0x00C00000
+#define   SDRAM_TR1_RDSL_STAGE1     0x00000000
+#define   SDRAM_TR1_RDSL_STAGE2     0x00400000
+#define   SDRAM_TR1_RDSL_STAGE3     0x00800000
+#define SDRAM_TR1_RDCD_MASK         0x00000800
+#define   SDRAM_TR1_RDCD_RCD_0_0    0x00000000
+#define   SDRAM_TR1_RDCD_RCD_1_2    0x00000800
+#define SDRAM_TR1_RDCT_MASK         0x000001FF
+#define   SDRAM_TR1_RDCT_ENCODE(x)  (((x) << 0) & SDRAM_TR1_RDCT_MASK)
+#define   SDRAM_TR1_RDCT_DECODE(x)  (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
+#define   SDRAM_TR1_RDCT_MIN        0x00000000
+#define   SDRAM_TR1_RDCT_MAX        0x000001FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM WDDCTR Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_WDDCTR_WRCP_MASK       0xC0000000
+#define   SDRAM_WDDCTR_WRCP_0DEG     0x00000000
+#define   SDRAM_WDDCTR_WRCP_90DEG    0x40000000
+#define   SDRAM_WDDCTR_WRCP_180DEG   0x80000000
+#define SDRAM_WDDCTR_DCD_MASK        0x000001FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM CLKTR Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK       0xC0000000
+#define   SDRAM_CLKTR_CLKP_0DEG     0x00000000
+#define   SDRAM_CLKTR_CLKP_90DEG    0x40000000
+#define   SDRAM_CLKTR_CLKP_180DEG   0x80000000
+#define SDRAM_CLKTR_DCDT_MASK       0x000001FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM DLYCAL Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLYCAL_DLCV_MASK      0x000003FC
+#define   SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define   SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+
+/*-----------------------------------------------------------------------------+
+|  General Definition
++-----------------------------------------------------------------------------*/
+#define DEFAULT_SPD_ADDR1   0x53
+#define DEFAULT_SPD_ADDR2   0x52
+#define ONE_BILLION         1000000000
+#define MAXBANKS            4               /* at most 4 dimm banks */
+#define MAX_SPD_BYTES       256
+#define NUMHALFCYCLES       4
+#define NUMMEMTESTS         8
+#define NUMMEMWORDS         8
+#define MAXBXCR             4
+#define TRUE                1
+#define FALSE               0
+
+const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+    {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+     0xFFFFFFFF, 0xFFFFFFFF},
+    {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+     0x00000000, 0x00000000},
+    {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+     0x55555555, 0x55555555},
+    {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+     0xAAAAAAAA, 0xAAAAAAAA},
+    {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+     0x5A5A5A5A, 0x5A5A5A5A},
+    {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+     0xA5A5A5A5, 0xA5A5A5A5},
+    {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+     0x55AA55AA, 0x55AA55AA},
+    {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+     0xAA55AA55, 0xAA55AA55}
+};
+
+
+unsigned char spd_read(uchar chip, uint addr);
+
+void get_spd_info(unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void check_mem_type
+                 (unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void check_volt_type
+                 (unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void program_cfg0(unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void program_cfg1(unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void program_rtr (unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void program_tr0 (unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks);
+
+void program_tr1 (void);
+
+void program_ecc (unsigned long  num_bytes);
+
+unsigned
+long  program_bxcr(unsigned long* dimm_populated,
+                   unsigned char* iic0_dimm_addr,
+                   unsigned long  num_dimm_banks);
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the IBM walnut has.
+ *
+ * BUG: Don't handle ECC memory
+ * BUG: A few values in the TR register is currently hardcoded
+ */
+
+long int spd_sdram(void) {
+    unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
+    unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
+    unsigned long total_size;
+    unsigned long cfg0;
+    unsigned long mcsts;
+    unsigned long num_dimm_banks;               /* on board dimm banks */
+
+    num_dimm_banks = sizeof(iic0_dimm_addr);
+
+	/*
+	 * Make sure I2C controller is initialized
+	 * before continuing.
+	 */
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+    /*
+     * Read the SPD information using I2C interface. Check to see if the
+     * DIMM slots are populated.
+     */
+    get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * Check the memory type for the dimms plugged.
+     */
+    check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * Check the voltage type for the dimms plugged.
+     */
+    check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * program 440GP SDRAM controller options (SDRAM0_CFG0)
+     */
+    program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * program 440GP SDRAM controller options (SDRAM0_CFG1)
+     */
+    program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * program SDRAM refresh register (SDRAM0_RTR)
+     */
+    program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * program SDRAM Timing Register 0 (SDRAM0_TR0)
+     */
+    program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+    /*
+     * program the BxCR registers to find out total sdram installed
+     */
+    total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
+        num_dimm_banks);
+
+    /*
+     * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
+     */
+    mtsdram(mem_clktr, 0x40000000);
+
+    /*
+     * delay to ensure 200 usec has elapsed
+     */
+    udelay(400);
+
+    /*
+     * enable the memory controller
+     */
+    mfsdram(mem_cfg0, cfg0);
+    mtsdram(mem_cfg0, cfg0 | SDRAM_CFG0_DCEN);
+
+    /*
+     * wait for SDRAM_CFG0_DC_EN to complete
+     */
+    while(1) {
+        mfsdram(mem_mcsts, mcsts);
+        if ((mcsts & SDRAM_MCSTS_MRSC) != 0) {
+            break;
+        }
+    }
+
+    /*
+     * program SDRAM Timing Register 1, adding some delays
+     */
+    program_tr1();
+
+    /*
+     * if ECC is enabled, initialize parity bits
+     */
+
+	return total_size;
+}
+
+unsigned char spd_read(uchar chip, uint addr) {
+	unsigned char data[2];
+
+	if (i2c_read(chip, addr, 1, data, 1) == 0)
+		return data[0];
+	else
+		return 0;
+}
+
+void get_spd_info(unsigned long*   dimm_populated,
+                  unsigned char*   iic0_dimm_addr,
+                  unsigned long    num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned long dimm_found;
+    unsigned char num_of_bytes;
+    unsigned char total_size;
+
+    dimm_found = FALSE;
+    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+        num_of_bytes = 0;
+        total_size = 0;
+
+        num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+        total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+
+        if ((num_of_bytes != 0) && (total_size != 0)) {
+            dimm_populated[dimm_num] = TRUE;
+            dimm_found = TRUE;
+#if 0
+            printf("DIMM slot %lu: populated\n", dimm_num);
+#endif
+        }
+        else {
+            dimm_populated[dimm_num] = FALSE;
+#if 0
+            printf("DIMM slot %lu: Not populated\n", dimm_num);
+#endif
+        }
+    }
+
+    if (dimm_found == FALSE) {
+        printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+        hang();
+    }
+}
+
+void check_mem_type(unsigned long*   dimm_populated,
+                    unsigned char*   iic0_dimm_addr,
+                    unsigned long    num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned char dimm_type;
+
+    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+        if (dimm_populated[dimm_num] == TRUE) {
+            dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+            switch (dimm_type) {
+            case 7:
+#if 0
+                printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
+#endif
+                break;
+            default:
+                printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
+                    dimm_num);
+                printf("Only DDR SDRAM DIMMs are supported.\n");
+                printf("Replace the DIMM module with a supported DIMM.\n\n");
+                hang();
+                break;
+            }
+        }
+    }
+}
+
+
+void check_volt_type(unsigned long*   dimm_populated,
+                     unsigned char*   iic0_dimm_addr,
+                     unsigned long    num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned long voltage_type;
+
+    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+        if (dimm_populated[dimm_num] == TRUE) {
+            voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+            if (voltage_type != 0x04) {
+                printf("ERROR: DIMM %lu with unsupported voltage level.\n",
+                    dimm_num);
+                hang();
+            }
+            else {
+#if 0
+                printf("DIMM %lu voltage level supported.\n", dimm_num);
+#endif
+            }
+            break;
+        }
+    }
+}
+
+void program_cfg0(unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned long cfg0;
+    unsigned long ecc_enabled;
+    unsigned char ecc;
+    unsigned char attributes;
+    unsigned long data_width;
+    unsigned long dimm_32bit;
+    unsigned long dimm_64bit;
+
+    /*
+     * get Memory Controller Options 0 data
+     */
+    mfsdram(mem_cfg0, cfg0);
+
+    /*
+     * clear bits
+     */
+    cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
+              SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
+              SDRAM_CFG0_DMWD_MASK |
+              SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
+
+
+    /*
+     * FIXME: assume the DDR SDRAMs in both banks are the same
+     */
+    ecc_enabled = TRUE;
+    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+        if (dimm_populated[dimm_num] == TRUE) {
+            ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
+            if (ecc != 0x02) {
+                ecc_enabled = FALSE;
+            }
+
+            /*
+             * program Registered DIMM Enable
+             */
+            attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
+            if ((attributes & 0x02) != 0x00) {
+                cfg0 |= SDRAM_CFG0_RDEN;
+            }
+
+            /*
+             * program DDR SDRAM Data Width
+             */
+            data_width =
+                (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
+                (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
+            if (data_width == 64 || data_width == 72) {
+                dimm_64bit = TRUE;
+                cfg0 |= SDRAM_CFG0_DMWD_64;
+            }
+            else if (data_width == 32 || data_width == 40) {
+                dimm_32bit = TRUE;
+                cfg0 |= SDRAM_CFG0_DMWD_32;
+            }
+            else {
+                printf("WARNING: DIMM with datawidth of %lu bits.\n",
+                    data_width);
+                printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
+                hang();
+            }
+            break;
+        }
+    }
+
+    /*
+     * program Memory Data Error Checking
+     */
+    if (ecc_enabled == TRUE) {
+        cfg0 |= SDRAM_CFG0_MCHK_GEN;
+    }
+    else {
+        cfg0 |= SDRAM_CFG0_MCHK_NON;
+    }
+
+    /*
+     * program Page Management Unit
+     */
+    cfg0 |= SDRAM_CFG0_PMUD;
+
+    /*
+     * program Memory Controller Options 0
+     * Note: DCEN must be enabled after all DDR SDRAM controller
+     * configuration registers get initialized.
+     */
+    mtsdram(mem_cfg0, cfg0);
+}
+
+void program_cfg1(unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks)
+{
+    unsigned long cfg1;
+    mfsdram(mem_cfg1, cfg1);
+
+    /*
+     * Self-refresh exit, disable PM
+     */
+    cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
+
+    /*
+     * program Memory Controller Options 1
+     */
+    mtsdram(mem_cfg1, cfg1);
+}
+
+void program_rtr (unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned long bus_period_x_10;
+    unsigned long refresh_rate = 0;
+    unsigned char refresh_rate_type;
+    unsigned long refresh_interval;
+    unsigned long sdram_rtr;
+    PPC440_SYS_INFO sys_info;
+
+    /*
+     * get the board info
+     */
+    get_sys_info(&sys_info);
+    bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+
+    for (dimm_num = 0;  dimm_num < num_dimm_banks; dimm_num++) {
+        if (dimm_populated[dimm_num] == TRUE) {
+            refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
+            switch (refresh_rate_type) {
+            case 0x00:
+                refresh_rate = 15625;
+                break;
+            case 0x011:
+                refresh_rate = 15625/4;
+                break;
+            case 0x02:
+                refresh_rate = 15625/2;
+                break;
+            case 0x03:
+                refresh_rate = 15626*2;
+                break;
+            case 0x04:
+                refresh_rate = 15625*4;
+                break;
+            case 0x05:
+                refresh_rate = 15625*8;
+                break;
+            default:
+                printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
+                    dimm_num);
+                printf("Replace the DIMM module with a supported DIMM.\n");
+                break;
+            }
+
+            break;
+        }
+    }
+
+    refresh_interval = refresh_rate * 10 / bus_period_x_10;
+    sdram_rtr = (refresh_interval & 0x3ff8) <<  16;
+
+    /*
+     * program Refresh Timer Register (SDRAM0_RTR)
+     */
+    mtsdram(mem_rtr, sdram_rtr);
+}
+
+void program_tr0 (unsigned long* dimm_populated,
+                  unsigned char* iic0_dimm_addr,
+                  unsigned long  num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned long tr0;
+    unsigned char wcsbc;
+    unsigned char t_rp_ns;
+    unsigned char t_rcd_ns;
+    unsigned char t_ras_ns;
+    unsigned long t_rp_clk;
+    unsigned long t_ras_rcd_clk;
+    unsigned long t_rcd_clk;
+    unsigned long t_rfc_clk;
+    unsigned long plb_check;
+    unsigned char cas_bit;
+    unsigned long cas_index;
+    unsigned char cas_2_0_available;
+    unsigned char cas_2_5_available;
+    unsigned char cas_3_0_available;
+    unsigned long cycle_time_ns_x_10[3];
+    unsigned long tcyc_3_0_ns_x_10;
+    unsigned long tcyc_2_5_ns_x_10;
+    unsigned long tcyc_2_0_ns_x_10;
+    unsigned long tcyc_reg;
+    unsigned long bus_period_x_10;
+    PPC440_SYS_INFO sys_info;
+    unsigned long residue;
+
+    /*
+     * get the board info
+     */
+    get_sys_info(&sys_info);
+    bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+    /*
+     * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+     */
+    mfsdram(mem_tr0, tr0);
+    tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
+             SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
+             SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
+             SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
+
+    /*
+     * initialization
+     */
+    wcsbc = 0;
+    t_rp_ns = 0;
+    t_rcd_ns = 0;
+    t_ras_ns = 0;
+    cas_2_0_available = TRUE;
+    cas_2_5_available = TRUE;
+    cas_3_0_available = TRUE;
+    tcyc_2_0_ns_x_10 = 0;
+    tcyc_2_5_ns_x_10 = 0;
+    tcyc_3_0_ns_x_10 = 0;
+
+    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+        if (dimm_populated[dimm_num] == TRUE) {
+            wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
+            t_rp_ns  = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+            t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
+            t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
+            cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+
+            for (cas_index = 0; cas_index < 3; cas_index++) {
+                switch (cas_index) {
+                case 0:
+                    tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+                    break;
+                case 1:
+                    tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+                    break;
+                default:
+                    tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+                    break;
+                }
+
+                if ((tcyc_reg & 0x0F) >= 10) {
+                    printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
+                        dimm_num);
+                    hang();
+                }
+
+                cycle_time_ns_x_10[cas_index] =
+                    (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
+            }
+
+            cas_index = 0;
+
+            if ((cas_bit & 0x80) != 0) {
+                cas_index += 3;
+            }
+            else if ((cas_bit & 0x40) != 0) {
+                cas_index += 2;
+            }
+            else if ((cas_bit & 0x20) != 0) {
+                cas_index += 1;
+            }
+
+            if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
+                tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+                cas_index++;
+            }
+            else {
+                if (cas_index != 0) {
+                    cas_index++;
+                }
+                cas_3_0_available = FALSE;
+            }
+
+            if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
+                tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
+                cas_index++;
+            }
+            else {
+                if (cas_index != 0) {
+                    cas_index++;
+                }
+                cas_2_5_available = FALSE;
+            }
+
+            if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
+                tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
+                cas_index++;
+            }
+            else {
+                if (cas_index != 0) {
+                    cas_index++;
+                }
+                cas_2_0_available = FALSE;
+            }
+
+            break;
+        }
+    }
+
+    /*
+     * Program SD_WR and SD_WCSBC fields
+     */
+    tr0 |= SDRAM_TR0_SDWR_2_CLK;                /* Write Recovery: 2 CLK */
+    switch (wcsbc) {
+    case 0:
+        tr0 |= SDRAM_TR0_SDWD_0_CLK;
+        break;
+    default:
+        tr0 |= SDRAM_TR0_SDWD_1_CLK;
+        break;
+    }
+
+    /*
+     * Program SD_CASL field
+     */
+    if ((cas_2_0_available == TRUE) &&
+        (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
+        tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
+    }
+    else if((cas_2_5_available == TRUE) &&
+        (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
+        tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
+    }
+    else if((cas_3_0_available == TRUE) &&
+        (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
+        tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
+    }
+    else {
+        printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
+        printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+        printf("Make sure the PLB speed is within the supported range.\n");
+        hang();
+    }
+
+    /*
+     * Calculate Trp in clock cycles and round up if necessary
+     * Program SD_PTA field
+     */
+    t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
+    plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
+    if (sys_info.freqPLB != plb_check) {
+        t_rp_clk++;
+    }
+    switch ((unsigned long)t_rp_clk) {
+    case 0:
+    case 1:
+    case 2:
+        tr0 |= SDRAM_TR0_SDPA_2_CLK;
+        break;
+    case 3:
+        tr0 |= SDRAM_TR0_SDPA_3_CLK;
+        break;
+    default:
+        tr0 |= SDRAM_TR0_SDPA_4_CLK;
+        break;
+    }
+
+    /*
+     * Program SD_CTP field
+     */
+    t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
+    plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
+    if (sys_info.freqPLB != plb_check) {
+        t_ras_rcd_clk++;
+    }
+    switch (t_ras_rcd_clk) {
+    case 0:
+    case 1:
+    case 2:
+      tr0 |= SDRAM_TR0_SDCP_2_CLK;
+      break;
+    case 3:
+      tr0 |= SDRAM_TR0_SDCP_3_CLK;
+      break;
+    case 4:
+      tr0 |= SDRAM_TR0_SDCP_4_CLK;
+      break;
+    default:
+      tr0 |= SDRAM_TR0_SDCP_5_CLK;
+      break;
+    }
+
+    /*
+     * Program SD_LDF field
+     */
+    tr0 |= SDRAM_TR0_SDLD_2_CLK;
+
+    /*
+     * Program SD_RFTA field
+     * FIXME tRFC hardcoded as 75 nanoseconds
+     */
+    t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
+    residue = sys_info.freqPLB % (ONE_BILLION / 75);
+    if (residue >= (ONE_BILLION / 150)) {
+        t_rfc_clk++;
+    }
+    switch (t_rfc_clk) {
+    case 0:
+    case 1:
+    case 2:
+    case 3:
+    case 4:
+    case 5:
+    case 6:
+        tr0 |= SDRAM_TR0_SDRA_6_CLK;
+        break;
+    case 7:
+        tr0 |= SDRAM_TR0_SDRA_7_CLK;
+        break;
+    case 8:
+        tr0 |= SDRAM_TR0_SDRA_8_CLK;
+        break;
+    case 9:
+        tr0 |= SDRAM_TR0_SDRA_9_CLK;
+        break;
+    case 10:
+        tr0 |= SDRAM_TR0_SDRA_10_CLK;
+        break;
+    case 11:
+        tr0 |= SDRAM_TR0_SDRA_11_CLK;
+        break;
+    case 12:
+        tr0 |= SDRAM_TR0_SDRA_12_CLK;
+        break;
+    default:
+        tr0 |= SDRAM_TR0_SDRA_13_CLK;
+        break;
+    }
+
+    /*
+     * Program SD_RCD field
+     */
+    t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
+    plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
+    if (sys_info.freqPLB != plb_check) {
+        t_rcd_clk++;
+    }
+    switch (t_rcd_clk) {
+    case 0:
+    case 1:
+    case 2:
+        tr0 |= SDRAM_TR0_SDRD_2_CLK;
+        break;
+    case 3:
+        tr0 |= SDRAM_TR0_SDRD_3_CLK;
+        break;
+    default:
+        tr0 |= SDRAM_TR0_SDRD_4_CLK;
+        break;
+    }
+
+#if 0
+    printf("tr0: %x\n", tr0);
+#endif
+    mtsdram(mem_tr0, tr0);
+}
+
+void program_tr1 (void)
+{
+    unsigned long tr0;
+    unsigned long tr1;
+    unsigned long cfg0;
+    unsigned long ecc_temp;
+    unsigned long dlycal;
+    unsigned long dly_val;
+    unsigned long i, j, k;
+    unsigned long bxcr_num;
+    unsigned long max_pass_length;
+    unsigned long current_pass_length;
+    unsigned long current_fail_length;
+    unsigned long current_start;
+    unsigned long rdclt;
+    unsigned long rdclt_offset;
+    long max_start;
+    long max_end;
+    long rdclt_average;
+    unsigned char window_found;
+    unsigned char fail_found;
+    unsigned char pass_found;
+    unsigned long * membase;
+    PPC440_SYS_INFO sys_info;
+
+    /*
+     * get the board info
+     */
+    get_sys_info(&sys_info);
+
+    /*
+     * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
+     */
+    mfsdram(mem_tr1, tr1);
+    tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
+             SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
+
+    mfsdram(mem_tr0, tr0);
+    if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
+       (sys_info.freqPLB > 100000000)) {
+        tr1 |= SDRAM_TR1_RDSS_TR2;
+        tr1 |= SDRAM_TR1_RDSL_STAGE3;
+        tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+    }
+    else {
+        tr1 |= SDRAM_TR1_RDSS_TR1;
+        tr1 |= SDRAM_TR1_RDSL_STAGE2;
+        tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+    }
+
+    /*
+     * save CFG0 ECC setting to a temporary variable and turn ECC off
+     */
+    mfsdram(mem_cfg0, cfg0);
+    ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
+    mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
+
+    /*
+     * get the delay line calibration register value
+     */
+    mfsdram(mem_dlycal, dlycal);
+    dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+    max_pass_length = 0;
+    max_start = 0;
+    max_end = 0;
+    current_pass_length = 0;
+    current_fail_length = 0;
+    current_start = 0;
+    rdclt_offset = 0;
+    window_found = FALSE;
+    fail_found = FALSE;
+    pass_found = FALSE;
+#ifdef DEBUG
+    printf("Starting memory test ");
+#endif
+    for (k = 0; k < NUMHALFCYCLES; k++) {
+        for (rdclt = 0; rdclt < dly_val; rdclt++)  {
+            /*
+             * Set the timing reg for the test.
+             */
+            mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
+
+            for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+                mtdcr(memcfga, mem_b0cr + (bxcr_num<<2));
+                if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
+                    /* Bank is enabled */
+                    membase = (unsigned long*)
+                        (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK);
+
+                    /*
+                     * Run the short memory test
+                     */
+                    for (i = 0; i < NUMMEMTESTS; i++) {
+                        for (j = 0; j < NUMMEMWORDS; j++) {
+                            membase[j] = test[i][j];
+                            ppcDcbf((unsigned long)&(membase[j]));
+                        }
+
+                        for (j = 0; j < NUMMEMWORDS; j++) {
+                            if (membase[j] != test[i][j]) {
+                                ppcDcbf((unsigned long)&(membase[j]));
+                                break;
+                            }
+                            ppcDcbf((unsigned long)&(membase[j]));
+                        }
+
+                        if (j < NUMMEMWORDS) {
+                            break;
+                        }
+                    }
+
+                    /*
+                     * see if the rdclt value passed
+                     */
+                    if (i < NUMMEMTESTS) {
+                        break;
+                    }
+                }
+            }
+
+            if (bxcr_num == MAXBXCR) {
+                if (fail_found == TRUE) {
+                    pass_found = TRUE;
+                    if (current_pass_length == 0) {
+                        current_start = rdclt_offset + rdclt;
+                    }
+
+                    current_fail_length = 0;
+                    current_pass_length++;
+
+                    if (current_pass_length > max_pass_length) {
+                        max_pass_length = current_pass_length;
+                        max_start = current_start;
+                        max_end = rdclt_offset + rdclt;
+                    }
+                }
+            }
+            else {
+                current_pass_length = 0;
+                current_fail_length++;
+
+                if (current_fail_length >= (dly_val>>2)) {
+                    if (fail_found == FALSE) {
+                        fail_found = TRUE;
+                    }
+                    else if (pass_found == TRUE) {
+                        window_found = TRUE;
+                        break;
+                    }
+                }
+            }
+        }
+#ifdef DEBUG
+        printf(".");
+#endif
+        if (window_found == TRUE) {
+            break;
+        }
+
+        tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+        rdclt_offset += dly_val;
+    }
+#ifdef DEBUG
+    printf("\n");
+#endif
+
+    /*
+     * make sure we find the window
+     */
+    if (window_found == FALSE) {
+       printf("ERROR: Cannot determine a common read delay.\n");
+       hang();
+    }
+
+    /*
+     * restore the orignal ECC setting
+     */
+    mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
+
+    /*
+     * set the SDRAM TR1 RDCD value
+     */
+    tr1 &= ~SDRAM_TR1_RDCD_MASK;
+    if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
+        tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
+    }
+    else {
+        tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
+    }
+
+    /*
+     * set the SDRAM TR1 RDCLT value
+     */
+    tr1 &= ~SDRAM_TR1_RDCT_MASK;
+    while (max_end >= (dly_val<<1)) {
+        max_end -= (dly_val<<1);
+        max_start -= (dly_val<<1);
+    }
+
+    rdclt_average = ((max_start + max_end) >> 1);
+    if (rdclt_average >= 0x60)
+        while(1);
+
+    if (rdclt_average < 0) {
+        rdclt_average = 0;
+    }
+
+    if (rdclt_average >= dly_val) {
+        rdclt_average -= dly_val;
+        tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
+    }
+    tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
+
+#if 0
+    printf("tr1: %x\n", tr1);
+#endif
+    /*
+     * program SDRAM Timing Register 1 TR1
+     */
+    mtsdram(mem_tr1, tr1);
+}
+
+unsigned long program_bxcr(unsigned long* dimm_populated,
+                           unsigned char* iic0_dimm_addr,
+                           unsigned long  num_dimm_banks)
+{
+    unsigned long dimm_num;
+    unsigned long bxcr_num;
+    unsigned long bank_base_addr;
+    unsigned long bank_size_bytes;
+    unsigned long cr;
+    unsigned long i;
+    unsigned long temp;
+    unsigned char num_row_addr;
+    unsigned char num_col_addr;
+    unsigned char num_banks;
+    unsigned char bank_size_id;
+
+
+    /*
+     * Set the BxCR regs.  First, wipe out the bank config registers.
+     */
+    for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
+        mtdcr(memcfga, mem_b0cr + (bxcr_num << 2));
+        mtdcr(memcfgd, 0x00000000);
+    }
+
+    /*
+     * reset the bank_base address
+     */
+    bank_base_addr = CFG_SDRAM_BASE;
+
+    for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+        if (dimm_populated[dimm_num] == TRUE) {
+            num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
+            num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+            num_banks    = spd_read(iic0_dimm_addr[dimm_num], 5);
+            bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+
+            /*
+             * Set the SDRAM0_BxCR regs
+             */
+            cr = 0;
+            bank_size_bytes = 4 * 1024 * 1024 * bank_size_id;
+            switch (bank_size_id) {
+            case 0x02:
+                cr |= SDRAM_BXCR_SDSZ_8;
+                break;
+            case 0x04:
+                cr |= SDRAM_BXCR_SDSZ_16;
+                break;
+            case 0x08:
+                cr |= SDRAM_BXCR_SDSZ_32;
+                break;
+            case 0x10:
+                cr |= SDRAM_BXCR_SDSZ_64;
+                break;
+            case 0x20:
+                cr |= SDRAM_BXCR_SDSZ_128;
+                break;
+            case 0x40:
+                cr |= SDRAM_BXCR_SDSZ_256;
+                break;
+            case 0x80:
+                cr |= SDRAM_BXCR_SDSZ_512;
+                break;
+            default:
+                printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+                    dimm_num);
+                printf("ERROR: Unsupported value for the banksize: %d.\n",
+                   bank_size_id);
+                printf("Replace the DIMM module with a supported DIMM.\n\n");
+                hang();
+            }
+
+            switch (num_col_addr) {
+            case 0x08:
+                cr |= SDRAM_BXCR_SDAM_1;
+                break;
+            case 0x09:
+                cr |= SDRAM_BXCR_SDAM_2;
+                break;
+            case 0x0A:
+                cr |= SDRAM_BXCR_SDAM_3;
+                break;
+            case 0x0B:
+                cr |= SDRAM_BXCR_SDAM_4;
+                break;
+            default:
+                printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
+                   dimm_num);
+                printf("ERROR: Unsupported value for number of "
+                   "column addresses: %d.\n", num_col_addr);
+                printf("Replace the DIMM module with a supported DIMM.\n\n");
+                hang();
+            }
+
+            /*
+             * enable the bank
+             */
+            cr |= SDRAM_BXCR_SDBE;
+
+            /*------------------------------------------------------------------
+            | This next section is hardware dependent and must be programmed
+            | to match the hardware.
+            +-----------------------------------------------------------------*/
+            if (dimm_num == 0) {
+                for (i = 0; i < num_banks; i++) {
+                    mtdcr(memcfga, mem_b0cr + (i << 2));
+                    temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
+                                              SDRAM_BXCR_SDSZ_MASK |
+                                              SDRAM_BXCR_SDAM_MASK |
+                                              SDRAM_BXCR_SDBE);
+                    cr |= temp;
+                    cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
+                    mtdcr(memcfgd, cr);
+                    bank_base_addr += bank_size_bytes;
+                }
+            }
+            else {
+                for (i = 0; i < num_banks; i++) {
+                    mtdcr(memcfga, mem_b2cr + (i << 2));
+                    temp = mfdcr(memcfgd) & ~(SDRAM_BXCR_SDBA_MASK |
+                                              SDRAM_BXCR_SDSZ_MASK |
+                                              SDRAM_BXCR_SDAM_MASK |
+                                              SDRAM_BXCR_SDBE);
+                    cr |= temp;
+                    cr |= bank_base_addr & SDRAM_BXCR_SDBA_MASK;
+                    mtdcr(memcfgd, cr);
+                    bank_base_addr += bank_size_bytes;
+                }
+            }
+        }
+    }
+
+    return(bank_base_addr);
+}
+
+void program_ecc (unsigned long  num_bytes)
+{
+    unsigned long bank_base_addr;
+    unsigned long current_address;
+    unsigned long end_address;
+    unsigned long address_increment;
+    unsigned long cfg0;
+
+    /*
+     * get Memory Controller Options 0 data
+     */
+    mfsdram(mem_cfg0, cfg0);
+
+    /*
+     * reset the bank_base address
+     */
+    bank_base_addr = CFG_SDRAM_BASE;
+
+    if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) {
+        mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+            SDRAM_CFG0_MCHK_GEN);
+
+        if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) {
+            address_increment = 4;
+        }
+        else {
+            address_increment = 8;
+        }
+
+        current_address = (unsigned long)(bank_base_addr);
+        end_address = (unsigned long)(bank_base_addr) + num_bytes;
+
+        while (current_address < end_address) {
+            *((unsigned long*)current_address) = 0x00000000;
+            current_address += address_increment;
+        }
+
+        mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) |
+            SDRAM_CFG0_MCHK_CHK);
+    }
+}
+
+#endif /* CONFIG_440 */
+
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/sa1100/serial.c b/cpu/sa1100/serial.c
new file mode 100644
index 00000000000..68bcd1f2a40
--- /dev/null
+++ b/cpu/sa1100/serial.c
@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+
+void serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	unsigned int reg = 0;
+
+	if (gd->baudrate == 1200)
+		reg = 191;
+	else if (gd->baudrate == 9600)
+		reg = 23;
+	else if (gd->baudrate == 19200)
+		reg = 11;
+	else if (gd->baudrate == 38400)
+		reg = 5;
+	else if (gd->baudrate == 57600)
+		reg = 3;
+	else if (gd->baudrate == 115200)
+		reg = 1;
+	else
+		hang ();
+
+#ifdef CONFIG_SERIAL1
+	/* Wait until port is ready ... */
+	while (Ser1UTSR1 & UTSR1_TBY) {
+	}
+
+	/* init serial serial 1 */
+	Ser1UTCR3 = 0x00;
+	Ser1UTSR0 = 0xff;
+	Ser1UTCR0 = (UTCR0_1StpBit | UTCR0_8BitData);
+	Ser1UTCR1 = 0;
+	Ser1UTCR2 = (u32) reg;
+	Ser1UTCR3 = (UTCR3_RXE | UTCR3_TXE);
+#elif CONFIG_SERIAL3
+	/* Wait until port is ready ... */
+	while (Ser3UTSR1 & UTSR1_TBY) {
+	}
+
+	/* init serial serial 3 */
+	Ser3UTCR3 = 0x00;
+	Ser3UTSR0 = 0xff;
+	Ser3UTCR0 = (UTCR0_1StpBit | UTCR0_8BitData);
+	Ser3UTCR1 = 0;
+	Ser3UTCR2 = (u32) reg;
+	Ser3UTCR3 = (UTCR3_RXE | UTCR3_TXE);
+#else
+#error "Bad: you didn't configured serial ..."
+#endif
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+	serial_setbrg ();
+
+	return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+#ifdef CONFIG_SERIAL1
+	/* wait for room in the tx FIFO on SERIAL1 */
+	while ((Ser1UTSR0 & UTSR0_TFS) == 0);
+
+	Ser1UTDR = c;
+#elif CONFIG_SERIAL3
+	/* wait for room in the tx FIFO on SERIAL3 */
+	while ((Ser3UTSR0 & UTSR0_TFS) == 0);
+
+	Ser3UTDR = c;
+#endif
+
+	/* If \n, also do \r */
+	if (c == '\n')
+		serial_putc ('\r');
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_tstc (void)
+{
+#ifdef CONFIG_SERIAL1
+	return Ser1UTSR1 & UTSR1_RNE;
+#elif CONFIG_SERIAL3
+	return Ser3UTSR1 & UTSR1_RNE;
+#endif
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+#ifdef CONFIG_SERIAL1
+	while (!(Ser1UTSR1 & UTSR1_RNE));
+
+	return (char) Ser1UTDR & 0xff;
+#elif CONFIG_SERIAL3
+	while (!(Ser3UTSR1 & UTSR1_RNE));
+
+	return (char) Ser3UTDR & 0xff;
+#endif
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
diff --git a/cpu/sa1100/start.S b/cpu/sa1100/start.S
new file mode 100644
index 00000000000..c0f30f5c321
--- /dev/null
+++ b/cpu/sa1100/start.S
@@ -0,0 +1,422 @@
+/*
+ *  armboot - Startup Code for SA1100 CPU
+ *
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
+ *  Copyright (c) 2001	Alex Züpke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+
+#include <config.h>
+#include <version.h>
+
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:	b       reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:	.word undefined_instruction
+_software_interrupt:	.word software_interrupt
+_prefetch_abort:	.word prefetch_abort
+_data_abort:		.word data_abort
+_not_used:		.word not_used
+_irq:			.word irq
+_fiq:			.word fiq
+
+	.balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * relocate armboot to ram
+ * setup stack
+ * jump to second stage
+ *
+ *************************************************************************
+ */
+
+/*
+ * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h)
+ */
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+	.word _start
+
+/*
+ * Note: _armboot_end_data and _armboot_end are defined
+ * by the (board-dependent) linker script.
+ * _armboot_end_data is the first usable FLASH address after armboot
+ */
+.globl _armboot_end_data
+_armboot_end_data:
+	.word armboot_end_data
+.globl _armboot_end
+_armboot_end:
+	.word armboot_end
+
+/*
+ * _armboot_real_end is the first usable RAM address behind armboot
+ * and the various stacks
+ */
+.globl _armboot_real_end
+_armboot_real_end:
+	.word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+	.word	0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+	.word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+	/*
+	 * set the cpu to SVC32 mode
+	 */
+	mrs	r0,cpsr
+	bic	r0,r0,#0x1f
+	orr	r0,r0,#0x13
+	msr	cpsr,r0
+
+	/*
+	 * we do sys-critical inits only at reboot,
+	 * not when booting from ram!
+	 */
+#ifdef CONFIG_INIT_CRITICAL
+	bl	cpu_init_crit
+#endif
+
+relocate:
+	/*
+	 * relocate armboot to RAM
+	 */
+	adr	r0, _start		/* r0 <- current position of code */
+	ldr	r2, _armboot_start
+	ldr	r3, _armboot_end
+	sub	r2, r3, r2		/* r2 <- size of armboot */
+	ldr	r1, _TEXT_BASE		/* r1 <- destination address */
+	add	r2, r0, r2		/* r2 <- source end address */
+
+	/*
+	 * r0 = source address
+	 * r1 = target address
+	 * r2 = source end address
+	 */
+copy_loop:
+	ldmia	r0!, {r3-r10}
+	stmia	r1!, {r3-r10}
+	cmp	r0, r2
+	ble	copy_loop
+
+	/* set up the stack */
+	ldr	r0, _armboot_end
+	add	r0, r0, #CONFIG_STACKSIZE
+	sub	sp, r0, #12		/* leave 3 words for abort-stack */
+
+	ldr	pc, _start_armboot
+
+_start_armboot:	.word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+/* Interupt-Controller base address */
+IC_BASE:	.word	0x90050000
+#define ICMR	0x04
+
+
+/* Reset-Controller */
+RST_BASE:		.word   0x90030000
+#define RSRR	0x00
+#define RCSR	0x04
+
+
+/* PWR */
+PWR_BASE:		.word   0x90020000
+#define PSPR    0x08
+#define PPCR    0x14
+cpuspeed:		.word   CFG_CPUSPEED
+
+
+cpu_init_crit:
+	/*
+	 * mask all IRQs
+	 */
+	ldr	r0, IC_BASE
+	mov	r1, #0x00
+	str	r1, [r0, #ICMR]
+
+	/* set clock speed */
+	ldr	r0, PWR_BASE
+	ldr	r1, cpuspeed
+	str	r1, [r0, #PPCR]
+
+	/*
+	 * before relocating, we have to setup RAM timing
+	 * because memory timing is board-dependend, you will
+	 * find a memsetup.S in your board directory.
+	 */
+	mov	ip,	lr
+	bl	memsetup
+	mov	lr,	ip
+
+	/*
+	 * disable MMU stuff and enable I-cache
+	 */
+	mrc	p15,0,r0,c1,c0
+	bic	r0, r0, #0x00002000	@ clear bit 13 (X)
+	bic	r0, r0, #0x0000000f	@ clear bits 3-0 (WCAM)
+	orr	r0, r0, #0x00001000	@ set bit 12 (I) Icache
+	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
+	mcr	p15,0,r0,c1,c0
+
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	mov	pc, lr
+
+
+
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE	72
+
+#define S_OLD_R0	68
+#define S_PSR		64
+#define S_PC		60
+#define S_LR		56
+#define S_SP		52
+
+#define S_IP		48
+#define S_FP		44
+#define S_R10		40
+#define S_R9		36
+#define S_R8		32
+#define S_R7		28
+#define S_R6		24
+#define S_R5		20
+#define S_R4		16
+#define S_R3		12
+#define S_R2		8
+#define S_R1		4
+#define S_R0		0
+
+#define MODE_SVC 0x13
+#define I_BIT	 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+	.macro	bad_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+
+	ldr	r2, _armboot_end
+	add	r2, r2, #CONFIG_STACKSIZE
+	sub	r2, r2, #8
+	ldmia	r2, {r2 - r4}                   @ get pc, cpsr, old_r0
+	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
+
+	add	r5, sp, #S_SP
+	mov	r1, lr
+	stmia	r5, {r0 - r4}                   @ save sp_SVC, lr_SVC, pc, cpsr, old_r
+	mov	r0, sp
+	.endm
+
+	.macro	irq_save_user_regs
+	sub	sp, sp, #S_FRAME_SIZE
+	stmia	sp, {r0 - r12}			@ Calling r0-r12
+	add     r8, sp, #S_PC
+	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
+	str     lr, [r8, #0]                    @ Save calling PC
+	mrs     r6, spsr
+	str     r6, [r8, #4]                    @ Save CPSR
+	str     r0, [r8, #8]                    @ Save OLD_R0
+	mov	r0, sp
+	.endm
+
+	.macro	irq_restore_user_regs
+	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
+	mov	r0, r0
+	ldr	lr, [sp, #S_PC]			@ Get PC
+	add	sp, sp, #S_FRAME_SIZE
+	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro get_bad_stack
+	ldr	r13, _armboot_end		@ setup our mode stack
+	add	r13, r13, #CONFIG_STACKSIZE	@ resides at top of normal stack
+	sub	r13, r13, #8
+
+	str	lr, [r13]			@ save caller lr / spsr
+	mrs	lr, spsr
+	str     lr, [r13, #4]
+
+	mov	r13, #MODE_SVC			@ prepare SVC-Mode
+	msr	spsr_c, r13
+	mov	lr, pc
+	movs	pc, lr
+	.endm
+
+	.macro get_irq_stack			@ setup IRQ stack
+	ldr	sp, IRQ_STACK_START
+	.endm
+
+	.macro get_fiq_stack			@ setup FIQ stack
+	ldr	sp, FIQ_STACK_START
+	.endm
+
+/*
+ * exception handlers
+ */
+	.align  5
+undefined_instruction:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_undefined_instruction
+
+	.align	5
+software_interrupt:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_software_interrupt
+
+	.align	5
+prefetch_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_prefetch_abort
+
+	.align	5
+data_abort:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_data_abort
+
+	.align	5
+not_used:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+	.align	5
+irq:
+	get_irq_stack
+	irq_save_user_regs
+	bl 	do_irq
+	irq_restore_user_regs
+
+	.align	5
+fiq:
+	get_fiq_stack
+	/* someone ought to write a more effiction fiq_save_user_regs */
+	irq_save_user_regs
+	bl 	do_fiq
+	irq_restore_user_regs
+
+#else
+
+	.align	5
+irq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_irq
+
+	.align	5
+fiq:
+	get_bad_stack
+	bad_save_user_regs
+	bl 	do_fiq
+
+#endif
+
+	.align	5
+.globl reset_cpu
+reset_cpu:
+	ldr	r0, RST_BASE
+	mov	r1, #0x0			@ set bit 3-0 ...
+	str	r1, [r0, #RCSR]			@ ... to clear in RCSR
+	mov	r1, #0x1
+	str	r1, [r0, #RSRR]			@ and perform reset
+	b	reset_cpu			@ silly, but repeat endlessly
diff --git a/disk/part_dos.c b/disk/part_dos.c
new file mode 100644
index 00000000000..8e71baae0dd
--- /dev/null
+++ b/disk/part_dos.c
@@ -0,0 +1,233 @@
+/*
+ * (C) Copyright 2001
+ * Raymond Lo, lo@routefree.com
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Support for harddisk partitions.
+ *
+ * To be compatible with LinuxPPC and Apple we use the standard Apple
+ * SCSI disk partitioning scheme. For more information see:
+ * http://developer.apple.com/techpubs/mac/Devices/Devices-126.html#MARKER-14-92
+ */
+
+#include <common.h>
+#include <command.h>
+#include <ide.h>
+#include <cmd_disk.h>
+#include "part_dos.h"
+
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI)) && defined(CONFIG_DOS_PARTITION)
+
+/* Convert char[4] in little endian format to the host format integer
+ */
+static inline int le32_to_int(unsigned char *le32)
+{
+    return ((le32[3] << 24) +
+	    (le32[2] << 16) +
+	    (le32[1] << 8) +
+	     le32[0]
+	   );
+}
+
+static inline int is_extended(int part_type)
+{
+    return (part_type == 0x5 ||
+	    part_type == 0xf ||
+	    part_type == 0x85);
+}
+
+static void print_one_part (dos_partition_t *p, int ext_part_sector, int part_num)
+{
+	int lba_start = ext_part_sector + le32_to_int (p->start4);
+	int lba_size  = le32_to_int (p->size4);
+
+	printf ("%5d\t\t%10d\t%10d\t%2x%s\n",
+		part_num, lba_start, lba_size, p->sys_ind,
+		(is_extended (p->sys_ind) ? " Extd" : ""));
+}
+
+
+
+int test_part_dos (block_dev_desc_t *dev_desc)
+{
+	unsigned char buffer[DEFAULT_SECTOR_SIZE];
+
+	if ((dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) buffer) != 1) ||
+	    (buffer[DOS_PART_MAGIC_OFFSET + 0] != 0x55) ||
+	    (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) ) {
+	    	return (-1);
+	}
+	return (0);
+}
+
+/*  Print a partition that is relative to its Extended partition table
+ */
+static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_sector, int relative,
+							   int part_num)
+{
+	unsigned char buffer[DEFAULT_SECTOR_SIZE];
+	dos_partition_t *pt;
+	int i;
+
+	if (dev_desc->block_read(dev_desc->dev, ext_part_sector, 1, (ulong *) buffer) != 1) {
+		printf ("** Can't read partition table on %d:%d **\n",
+			dev_desc->dev, ext_part_sector);
+		return;
+	}
+	if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 ||
+		buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) {
+		printf ("bad MBR sector signature 0x%02x%02x\n",
+			buffer[DOS_PART_MAGIC_OFFSET],
+			buffer[DOS_PART_MAGIC_OFFSET + 1]);
+		return;
+	}
+
+	/* Print all primary/logical partitions */
+	pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET);
+	for (i = 0; i < 4; i++, pt++) {
+		/*
+                 * fdisk does not show the extended partitions that
+		 * are not in the MBR
+		 */
+
+		if ((pt->sys_ind != 0) &&
+		    (ext_part_sector == 0 || !is_extended (pt->sys_ind)) ) {
+			print_one_part (pt, ext_part_sector, part_num);
+		}
+
+		/* Reverse engr the fdisk part# assignment rule! */
+		if ((ext_part_sector == 0) ||
+		    (pt->sys_ind != 0 && !is_extended (pt->sys_ind)) ) {
+			part_num++;
+		}
+	}
+
+	/* Follows the extended partitions */
+	pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET);
+	for (i = 0; i < 4; i++, pt++) {
+		if (is_extended (pt->sys_ind)) {
+			int lba_start = le32_to_int (pt->start4) + relative;
+
+			print_partition_extended (dev_desc, lba_start,
+						  ext_part_sector == 0  ? lba_start
+									: relative,
+						  part_num);
+		}
+	}
+
+	return;
+}
+
+
+/*  Print a partition that is relative to its Extended partition table
+ */
+static int get_partition_info_extended (block_dev_desc_t *dev_desc, int ext_part_sector,
+				 int relative, int part_num,
+				 int which_part, disk_partition_t *info)
+{
+	unsigned char buffer[DEFAULT_SECTOR_SIZE];
+	dos_partition_t *pt;
+	int i;
+
+	if (dev_desc->block_read (dev_desc->dev, ext_part_sector, 1, (ulong *) buffer) != 1) {
+		printf ("** Can't read partition table on %d:%d **\n",
+			dev_desc->dev, ext_part_sector);
+		return -1;
+	}
+	if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 ||
+		buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) {
+		printf ("bad MBR sector signature 0x%02x%02x\n",
+			buffer[DOS_PART_MAGIC_OFFSET],
+			buffer[DOS_PART_MAGIC_OFFSET + 1]);
+		return -1;
+	}
+
+	/* Print all primary/logical partitions */
+	pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET);
+	for (i = 0; i < 4; i++, pt++) {
+		/*
+                 * fdisk does not show the extended partitions that
+                 * are not in the MBR
+		 */
+		if (pt->sys_ind != 0 && part_num == which_part) {
+			info->blksz = 512;
+			info->start = ext_part_sector + le32_to_int (pt->start4);
+			info->size  = le32_to_int (pt->size4);
+			switch(dev_desc->if_type) {
+				case IF_TYPE_IDE:
+				case IF_TYPE_ATAPI:
+					sprintf (info->name, "hd%c%d\n", 'a' + dev_desc->dev, part_num);
+					break;
+				case IF_TYPE_SCSI:
+					sprintf (info->name, "sd%c%d\n", 'a' + dev_desc->dev, part_num);
+					break;
+				case IF_TYPE_USB:
+					sprintf (info->name, "usbd%c%d\n", 'a' + dev_desc->dev, part_num);
+					break;
+				case IF_TYPE_DOC:
+					sprintf (info->name, "docd%c%d\n", 'a' + dev_desc->dev, part_num);
+					break;
+				default:
+					sprintf (info->name, "xx%c%d\n", 'a' + dev_desc->dev, part_num);
+					break;
+			}
+			/* sprintf(info->type, "%d, pt->sys_ind); */
+			sprintf (info->type, "U-Boot");
+			return 0;
+		}
+
+		/* Reverse engr the fdisk part# assignment rule! */
+		if ((ext_part_sector == 0) ||
+		    (pt->sys_ind != 0 && !is_extended (pt->sys_ind)) ) {
+			part_num++;
+		}
+	}
+
+	/* Follows the extended partitions */
+	pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET);
+	for (i = 0; i < 4; i++, pt++) {
+		if (is_extended (pt->sys_ind)) {
+			int lba_start = le32_to_int (pt->start4) + relative;
+
+			return get_partition_info_extended (dev_desc, lba_start,
+				 ext_part_sector == 0 ? lba_start : relative,
+				 part_num, which_part, info);
+		}
+	}
+	return -1;
+}
+
+void print_part_dos (block_dev_desc_t *dev_desc)
+{
+	printf ("Partition     Start Sector     Num Sectors     Type\n");
+	print_partition_extended (dev_desc, 0, 0, 1);
+}
+
+int get_partition_info_dos (block_dev_desc_t *dev_desc, int part, disk_partition_t * info)
+{
+	return get_partition_info_extended (dev_desc, 0, 0, 1, part, info);
+}
+
+
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_IDE) && CONFIG_DOS_PARTITION */
diff --git a/disk/part_mac.c b/disk/part_mac.c
new file mode 100644
index 00000000000..ee9d170b700
--- /dev/null
+++ b/disk/part_mac.c
@@ -0,0 +1,251 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Support for harddisk partitions.
+ *
+ * To be compatible with LinuxPPC and Apple we use the standard Apple
+ * SCSI disk partitioning scheme. For more information see:
+ * http://developer.apple.com/techpubs/mac/Devices/Devices-126.html#MARKER-14-92
+ */
+
+#include <common.h>
+#include <command.h>
+#include <ide.h>
+#include <cmd_disk.h>
+#include "part_mac.h"
+
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI)) && defined(CONFIG_MAC_PARTITION)
+
+/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
+#ifndef __ldiv_t_defined
+typedef struct {
+	long int quot;		/* Quotient	*/
+	long int rem;		/* Remainder	*/
+} ldiv_t;
+extern ldiv_t ldiv (long int __numer, long int __denom);
+# define __ldiv_t_defined	1
+#endif
+
+
+static int part_mac_read_ddb (block_dev_desc_t *dev_desc, mac_driver_desc_t *ddb_p);
+static int part_mac_read_pdb (block_dev_desc_t *dev_desc, int part, mac_partition_t *pdb_p);
+
+/*
+ * Test for a valid MAC partition
+ */
+int test_part_mac (block_dev_desc_t *dev_desc)
+{
+	mac_driver_desc_t	ddesc;
+	mac_partition_t		mpart;
+	ulong i, n;
+
+	if (part_mac_read_ddb (dev_desc, &ddesc)) {
+		/* error reading Driver Desriptor Block, or no valid Signature */
+		return (-1);
+	}
+
+	n = 1;	/* assuming at least one partition */
+	for (i=1; i<=n; ++i) {
+		if ((dev_desc->block_read(dev_desc->dev, i, 1, (ulong *)&mpart) != 1) ||
+		    (mpart.signature != MAC_PARTITION_MAGIC) ) {
+			return (-1);
+		}
+		/* update partition count */
+		n = mpart.map_count;
+	}
+	return (0);
+}
+
+
+void print_part_mac (block_dev_desc_t *dev_desc)
+{
+	ulong i, n;
+	mac_driver_desc_t	ddesc;
+	mac_partition_t		mpart;
+	ldiv_t mb, gb;
+
+	if (part_mac_read_ddb (dev_desc, &ddesc)) {
+		/* error reading Driver Desriptor Block, or no valid Signature */
+		return;
+	}
+
+	n  = ddesc.blk_count;
+
+	mb = ldiv(n, ((1024 * 1024) / ddesc.blk_size)); /* MB */
+	/* round to 1 digit */
+	mb.rem *= 10 * ddesc.blk_size;
+	mb.rem += 512 * 1024;
+	mb.rem /= 1024 * 1024;
+
+	gb = ldiv(10 * mb.quot + mb.rem, 10240);
+	gb.rem += 512;
+	gb.rem /= 1024;
+
+
+	printf ("Block Size=%d, Number of Blocks=%d, "
+		"Total Capacity: %ld.%ld MB = %ld.%ld GB\n"
+		"DeviceType=0x%x, DeviceId=0x%x\n\n"
+		"   #:                 type name"
+		"                   length   base       (size)\n",
+		ddesc.blk_size,
+		ddesc.blk_count,
+		mb.quot, mb.rem, gb.quot, gb.rem,
+		ddesc.dev_type, ddesc.dev_id
+		);
+
+	n = 1;	/* assuming at least one partition */
+	for (i=1; i<=n; ++i) {
+		ulong bytes;
+		char c;
+
+		printf ("%4ld: ", i);
+		if (dev_desc->block_read (dev_desc->dev, i, 1, (ulong *)&mpart) != 1) {
+			printf ("** Can't read Partition Map on %d:%ld **\n",
+				dev_desc->dev, i);
+			return;
+		}
+
+		if (mpart.signature != MAC_PARTITION_MAGIC) {
+			printf ("** Bad Signature on %d:%ld - "
+				"expected 0x%04x, got 0x%04x\n",
+				dev_desc->dev, i, MAC_PARTITION_MAGIC, mpart.signature);
+			return;
+		}
+
+		/* update partition count */
+		n = mpart.map_count;
+
+		c      = 'k';
+		bytes  = mpart.block_count;
+		bytes /= (1024 / ddesc.blk_size);  /* kB; assumes blk_size == 512 */
+		if (bytes >= 1024) {
+			bytes >>= 10;
+			c = 'M';
+		}
+		if (bytes >= 1024) {
+			bytes >>= 10;
+			c = 'G';
+		}
+
+		printf ("%20.32s %-18.32s %10u @ %-10u (%3ld%c)\n",
+			mpart.type,
+			mpart.name,
+			mpart.block_count,
+			mpart.start_block,
+			bytes, c
+			);
+	}
+
+	return;
+}
+
+
+/*
+ * Read Device Descriptor Block
+ */
+static int part_mac_read_ddb (block_dev_desc_t *dev_desc, mac_driver_desc_t *ddb_p)
+{
+	if (dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *)ddb_p) != 1) {
+		printf ("** Can't read Driver Desriptor Block **\n");
+		return (-1);
+	}
+
+	if (ddb_p->signature != MAC_DRIVER_MAGIC) {
+#if 0
+		printf ("** Bad Signature: expected 0x%04x, got 0x%04x\n",
+			MAC_DRIVER_MAGIC, ddb_p->signature);
+#endif
+		return (-1);
+	}
+	return (0);
+}
+
+/*
+ * Read Partition Descriptor Block
+ */
+static int part_mac_read_pdb (block_dev_desc_t *dev_desc, int part, mac_partition_t *pdb_p)
+{
+	int n = 1;
+
+	for (;;) {
+		/*
+                 * We must always read the descritpor block for
+                 * partition 1 first since this is the only way to
+                 * know how many partitions we have.
+		 */
+		if (dev_desc->block_read (dev_desc->dev, n, 1, (ulong *)pdb_p) != 1) {
+			printf ("** Can't read Partition Map on %d:%d **\n",
+				dev_desc->dev, n);
+			return (-1);
+		}
+
+		if (pdb_p->signature != MAC_PARTITION_MAGIC) {
+			printf ("** Bad Signature on %d:%d: "
+				"expected 0x%04x, got 0x%04x\n",
+				dev_desc->dev, n, MAC_PARTITION_MAGIC, pdb_p->signature);
+			return (-1);
+		}
+
+		if (n == part)
+			return (0);
+
+		if ((part < 1) || (part > pdb_p->map_count)) {
+			printf ("** Invalid partition %d:%d [%d:1...%d:%d only]\n",
+				dev_desc->dev, part,
+				dev_desc->dev,
+				dev_desc->dev, pdb_p->map_count);
+			return (-1);
+		}
+
+		/* update partition count */
+		n = part;
+	}
+
+	/* NOTREACHED */
+}
+
+int get_partition_info_mac (block_dev_desc_t *dev_desc, int part, disk_partition_t *info)
+{
+	mac_driver_desc_t	ddesc;
+	mac_partition_t		mpart;
+
+	if (part_mac_read_ddb (dev_desc, &ddesc)) {
+		return (-1);
+	}
+
+	info->blksz = ddesc.blk_size;
+
+	if (part_mac_read_pdb (dev_desc, part, &mpart)) {
+		return (-1);
+	}
+
+	info->start = mpart.start_block;
+	info->size  = mpart.block_count;
+	memcpy (info->type, mpart.type, sizeof(info->type));
+	memcpy (info->name, mpart.name, sizeof(info->name));
+
+	return (0);
+}
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_IDE) && CONFIG_MAC_PARTITION */
diff --git a/disk/part_mac.h b/disk/part_mac.h
new file mode 100644
index 00000000000..0340fe8febd
--- /dev/null
+++ b/disk/part_mac.h
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * See also Linux sources, fs/partitions/mac.h
+ *
+ * This file describes structures and values related to the standard
+ * Apple SCSI disk partitioning scheme. For more information see:
+ * http://developer.apple.com/techpubs/mac/Devices/Devices-126.html#MARKER-14-92
+ */
+
+#ifndef	_DISK_PART_MAC_H
+#define	_DISK_PART_MAC_H
+
+#define MAC_DRIVER_MAGIC	0x4552
+
+/*
+ * Driver Descriptor Structure, in block 0.
+ * This block is (and shall remain) 512 bytes long.
+ * Note that there is an alignment problem for the driver descriptor map!
+ */
+typedef struct mac_driver_desc {
+	__u16	signature;	/* expected to be MAC_DRIVER_MAGIC	*/
+	__u16	blk_size;	/* block size of device			*/
+	__u32	blk_count;	/* number of blocks on device		*/
+	__u16	dev_type;	/* device type				*/
+	__u16	dev_id;		/* device id				*/
+	__u32	data;		/* reserved				*/
+	__u16	drvr_cnt;	/* number of driver descriptor entries	*/
+	__u16	drvr_map[247];	/* driver descriptor map		*/
+} mac_driver_desc_t;
+
+/*
+ * Device Driver Entry
+ * (Cannot be included in mac_driver_desc because of alignment problems)
+ */
+typedef struct mac_driver_entry {
+	__u32	block;		/* block number of starting block	*/
+	__u16	size;		/* size of driver, in 512 byte blocks	*/
+	__u16	type;		/* OS Type				*/
+} mac_driver_entry_t;
+
+
+#define MAC_PARTITION_MAGIC	0x504d
+
+/* type field value for A/UX or other Unix partitions */
+#define APPLE_AUX_TYPE	"Apple_UNIX_SVR2"
+
+/*
+ * Each Partition Map entry (in blocks 1 ... N) has this format:
+ */
+typedef struct mac_partition {
+	__u16	signature;	/* expected to be MAC_PARTITION_MAGIC	*/
+	__u16	sig_pad;	/* reserved				*/
+	__u32	map_count;	/* # blocks in partition map		*/
+	__u32	start_block;	/* abs. starting block # of partition	*/
+	__u32	block_count;	/* number of blocks in partition	*/
+	uchar	name[32];	/* partition name			*/
+	uchar	type[32];	/* string type description		*/
+	__u32	data_start;	/* rel block # of first data block	*/
+	__u32	data_count;	/* number of data blocks		*/
+	__u32	status;		/* partition status bits		*/
+	__u32	boot_start;	/* first block of boot code		*/
+	__u32	boot_size;	/* size of boot code, in bytes		*/
+	__u32	boot_load;	/* boot code load address		*/
+	__u32	boot_load2;	/* reserved				*/
+	__u32	boot_entry;	/* boot code entry point		*/
+	__u32	boot_entry2;	/* reserved				*/
+	__u32	boot_cksum;	/* boot code checksum			*/
+	uchar	processor[16];	/* Type of Processor			*/
+	__u16	part_pad[188];	/* reserved				*/
+} mac_partition_t;
+
+#define MAC_STATUS_BOOTABLE	8	/* partition is bootable */
+
+#endif	/* _DISK_PART_MAC_H */
diff --git a/doc/README.PIP405 b/doc/README.PIP405
new file mode 100644
index 00000000000..c5ccf1875e2
--- /dev/null
+++ b/doc/README.PIP405
@@ -0,0 +1,385 @@
+U-Boot Changes due to PIP405 Port:
+===================================
+
+Changed files:
+==============
+- MAKEALL			added PIP405
+- makefile			added PIP405
+- common/Makefile		added Floppy disk and SCSI support
+- common/board.c		added PIP405, SCSI support, get_PCI_freq()
+- common/bootm.c		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
+- common/cmd_i2c.c		added "defined(CONFIG_PIP405)"
+- common/cmd_ide.c		changed div. functions to work with block device
+				description
+				added ATAPI support
+- common/command.c		added SCSI and Floppy support
+- common/console.c		replaced // with /* comments
+				added console settings from environment
+- common/devices.c		added ISA keyboard init
+- common/main.c			corrected the read of bootdelay
+- cpu/ppc4xx/405gp_pci.c	excluded file from PIP405
+- cpu/ppc4xx/i2c.c		added 16bit read write I2C support
+				added page write
+- cpu/ppc4xx/speed.c		added get_PCI_freq
+- cpu/ppc4xx/start.S		added CONFIG_IDENT_STRING
+- disk/Makefile			added part_iso for CD support
+- disk/part.c			changed to work with block device description
+				added ISO CD support
+				added dev_print (was ide_print in cmd_ide.c)
+- disk/part_dos.c		changed to work with block device description
+- disk/part_mac.c		changed to work with block device description
+- include/ata.h			added ATAPI commands
+- include/cmd_bsp.h		added PIP405 commands definitions
+- include/cmd_condefs.h		added Floppy and SCSI support
+- include/cmd_disk.h		changed to work with block device description
+- include/config_LANTEC.h	excluded CFG_CMD_FDC and CFG_CMD_SCSI from
+				CONFIG_CMD_FULL
+- include/config_hymod.h	excluded CFG_CMD_FDC and CFG_CMD_SCSI from
+				CONFIG_CMD_FULL
+- include/flash.h		added INTEL_ID_28F320C3T  0x88C488C4
+- include/i2c.h			added "defined(CONFIG_PIP405)"
+- include/image.h		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
+- include/u-boot.h		moved partitions functions definitions to part.h
+				added "defined(CONFIG_PIP405)"
+				added get_PCI_freq() definition
+- rtc/Makefile			added MC146818 RTC support
+- tools/mkimage.c		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
+
+Added files:
+============
+- board/pip405			directory for PIP405
+- board/pip405/cmd_pip405.c	board specific commands
+- board/pip405/config.mk	config make
+- board/pip405/flash.c		flash support
+- board/pip405/init.s		start-up
+- board/pip405/kbd.c		keyboard support
+- board/pip405/kbd.h		keyboard support
+- board/pip405/Makefile		Makefile
+- board/pip405/pci_piix4.h	southbridge definitions
+- board/pip405/pci_pip405.c	PCI support for PIP405
+- board/pip405/pci_pip405.h	PCI support for PIP405
+- board/pip405/pip405.c		PIP405 board init
+- board/pip405/pip405.h		PIP405 board init
+- board/pip405/pip405_isa.c	ISA support
+- board/pip405/pip405_isa.h	ISA support
+- board/pip405/u-boot.lds	Linker description
+- board/pip405/u-boot.lds.debugLinker description debug
+- board/pip405/sym53c8xx.c	SYM53C810A support
+- board/pip405/sym53c8xx_defs.h SYM53C810A definitions
+- board/pip405/vga_table.h	definitions of tables for VGA
+- board/pip405/video.c		CT69000 support
+- board/pip405/video.h		CT69000 support
+- common/cmd_fdc.c		Floppy disk support
+- common/cmd_scsi.c		SCSI support
+- disk/part_iso.c		ISO CD ROM support
+- disk/part_iso.h		ISO CD ROM support
+- include/cmd_fdc.h		command forFloppy disk support
+- include/cmd_scsi.h		command for SCSI support
+- include/part.h		partitions functions definitions
+				(was part of u-boot.h)
+- include/scsi.h		SCSI support
+- rtc/mc146818.c		MC146818 RTC support
+
+
+New Config Switches:
+====================
+For detailed description, refer to the corresponding paragraph in the
+section "Changes".
+
+New Commands:
+-------------
+CFG_CMD_SCSI	SCSI Support
+CFG_CMF_FDC	Floppy disk support
+
+IDE additions:
+--------------
+CONFIG_IDE_RESET_ROUTINE	defines that instead of a reset Pin,
+				the routine ide_set_reset(int idereset) is used.
+ATAPI support (experimental)
+----------------------------
+CONFIG_ATAPI	enables ATAPI Support
+
+SCSI support (experimental) only SYM53C8xx supported
+----------------------------------------------------
+CONFIG_SCSI_SYM53C8XX		type of SCSI controller
+CFG_SCSI_MAX_LUN	8	number of supported LUNs
+CFG_SCSI_MAX_SCSI_ID	7	maximum SCSI ID (0..6)
+CFG_SCSI_MAX_DEVICE	CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN
+				maximum of Target devices (multiple LUN support
+				for boot)
+
+ISO (CD-Boot) partition support (Experimental)
+----------------------------------------------
+CONFIG_ISO_PARTITION		CD-boot support
+
+RTC
+----
+CONFIG_RTC_MC146818		MC146818 RTC support
+
+Keyboard:
+---------
+CONFIG_ISA_KEYBOARD		Standard (PC-Style) Keyboard support
+
+Video:
+------
+CONFIG_VIDEO_CT69000		Enable Chips & Technologies 69000 Video chip
+				CONFIG_VIDEO must be defined also
+
+External peripheral base address:
+---------------------------------
+CFG_ISA_IO_BASE_ADDRESS		address of all ISA-bus related parts
+				_must_ be defined for ISA-bus parts
+
+Identify:
+---------
+CONFIG_IDENT_STRING		added to the U_BOOT_VERSION String
+
+
+I2C stuff:
+----------
+CFG_EEPROM_PAGE_WRITE_ENABLE	enables page write of the I2C EEPROM
+				CFG_EEPROM_PAGE_WRITE_BITS _must_ be
+				defined.
+
+
+Environment / Console:
+----------------------
+
+CFG_CONSOLE_IS_IN_ENV		if defined, stdin, stdout and stderr used from
+				the values stored in the evironment.
+
+CFG_CONSOLE_OVERWRITE_ROUTINE	if defined, console_overwrite() decides if the
+				values stored in the environment or the standard
+				serial in/out put should be assigned to the console.
+
+CFG_CONSOLE_ENV_OVERWRITE	if defined, the start-up console switching
+				are stored in the environment.
+
+PIP405 specific:
+----------------
+CONFIG_PORT_ADDR		address used to read boot configuration
+MULTI_PURPOSE_SOCKET_ADDR	address of the multi purpose socked
+SDRAM_EEPROM_WRITE_ADDRESS	addresses of the serial presence detect
+SDRAM_EEPROM_READ_ADDRESS	EEPROM on the SDRAM module.
+
+
+Changes:
+========
+
+Added Devices:
+==============
+
+Floppy support:
+---------------
+Support of a standard floppy disk controller at address CFG_ISA_IO_BASE_ADDRESS
++ 0x3F0. Enabled with define CFG_CMD_FDC. Reads a unformated floppy disk with a
+image header (see: mkimage). No interrupts and no DMA are used for this.
+Added files:
+- common/cmd_fdc.c
+- include/cmd_fdc.h
+
+SCSI support:
+-------------
+Support for Symbios SYM53C810A chip. Implemented as follows:
+- without disconnect
+- only asynchrounous
+- multiple LUN support (caution, needs a lot of RAM. define CFG_SCSI_MAX_LUN 1 to
+  save RAM)
+- multiple SCSI ID support
+- no write support
+- analyses the MAC, DOS and ISO pratition similar to the IDE support
+- allows booting from SCSI devices similar to the IDE support.
+The device numbers are not assigned like they are within the IDE support. The first
+device found will get the number 0, the next 1 etc. If all SCSI IDs (0..6) and all
+LUNs (8) are enabled, 56 boot devices are possible. This uses a lot of RAM since the
+device descriptors are not yet dynamically allocated. 56 boot devices are overkill
+anyway. Please refer to the section "Todo" chapter "block device support enhancement".
+The SYM53C810A uses 1 Interrupt and must be able of mastering the PCI bus.
+Added files:
+- common/cmd_scsi.c
+- common/board.c
+- include/cmd_scsi.h
+- include/scsi.h
+- board/pip405/sym53c8xx.c
+- board/pip405/sym53c8xx_defs.h
+
+ATAPI support (IDE changes):
+----------------------------
+Added ATAPI support (with CONFIG_ATAPI) in the file cmd_ide.c.
+To support a hardreset, when the IDE reset pin is not connected to the
+CFG_PC_IDE_RESET pin, the switch CONFIG_IDE_RESET_ROUTINE has been added. When
+this switch is enabled the routine void ide_set_reset(int idereset) must be
+within the board specific files.
+Only read from ATAPI devices are supported.
+Found out that the function trim_trail cuts off the last character if the whole
+string is filled. Added function cpy_ident instead, which trims also leading
+spaces and copies the string in the buffer.
+Changed files:
+- common/cmd_ide.c
+- include/ata.h
+
+ISO partition support:
+----------------------
+Added CD boot support for El-Torito bootable ISO CDs. The bootfile image must contain
+the U-Boot image header. Since CDs do not have "partitions", the boot partition is 0.
+The bootcatalog feature has not been tested so far. CD Boot is supported for ATAPI
+("diskboot") and SCSI ("scsiboot") devices.
+Added files:
+- disk/iso_part.c
+- disk/iso_part.h
+
+Block device changes:
+---------------------
+To allow the use of dos_part.c, mac_part.c and iso_part.c, the parameter
+block_dev_desc will be used when accessing the functions in these files. The block
+device descriptor (block_dev_desc) contains a pointer to the read routine of the
+device, which will be used to read blocks from the device.
+Renamed function ide_print to dev_print and moved it to the file disk/part.c to use
+it for IDE ATAPI and SCSI devices.
+Please refer to the section "Todo" chapter "block device support enhancement".
+Added files:
+- include/part.h
+changed files:
+- disk/dos_part.c
+- disk/dos_part.h
+- disk/mac_part.c
+- disk/mac_part.h
+- disk/part.c
+- common/cmd_ide.c
+- include/u-boot.h
+
+
+MC146818 RTC support:
+---------------------
+Added support for MC146818 RTC with defining CONFIG_RTC_MC146818. The ISA bus IO
+base address must be defined with CFG_ISA_IO_BASE_ADDRESS.
+Added files:
+- rtc/mc146818.c
+
+Standard ISA bus Keyboard support:
+----------------------------------
+Added support for the standard PC kyeboard controller. For the PIP405 the superIO
+controller must be set up previously. The keyboard uses the standard ISA IRQ, so
+the ISA PIC must also be set up.
+Added files:
+- board/pip405/kbd.c
+- board/pip405/kbd.h
+- board/pip405/pip405_isa.c
+- board/pip405/pip405_isa.h
+
+Chips and Technologie 69000 VGA controller support:
+---------------------------------------------------
+Added support for the CT69000 VGA controller.
+Added files:
+- board/pip405/video.c
+- board/pip405/video.h
+- board/pip405/vga_table.h
+
+
+Changed Items:
+==============
+
+Identify:
+---------
+Added the config variable CONFIG_IDENT_STRING which will be added to the
+"U_BOOT_VERSION __TIME__ DATE___ " String, to allows to identify intermidiate
+and custom versions.
+Changed files:
+- cpu/ppc4xx/start.s
+
+Firmware Image:
+---------------
+Added IH_OS_U_BOOT and IH_TYPE_FIRMWARE to the image definitions to allows the
+U-Boot update with prior CRC check.
+Changed files:
+- include/image.h
+- tools/mkimage.c
+- common/cmd_bootm.c
+
+Correct PCI Frequency for PPC405:
+---------------------------------
+Added function (in cpu/ppc4xx/speed.c) to get the PCI frequency for PPC405 CPU.
+The PCI Frequency will now be set correct in the board description in common/board.c.
+(was set to the busfreq before).
+Changed files:
+- cpu/ppc4xx/speed.c
+- common/board.c
+
+I2C Stuff:
+----------
+Added defined(CONFIG_PIP405) at several points in common/cmd_i2c.c.
+Added 16bit read/write support for I2C (PPC405), and page write to
+I2C EEPROM if defined CFG_EEPROM_PAGE_WRITE_ENABLE.
+Changed files:
+- cpu/ppc4xx/i2c.c
+- common/cmd_i2c.c
+
+Environment / Console:
+----------------------
+Although in README.console described, the U-Boot has not assinged the values
+found in the environment to the console. Corrected this behavior, but only if
+CFG_CONSOLE_IS_IN_ENV is defined.
+If CFG_CONSOLE_OVERWRITE_ROUTINE is defined, console_overwrite() decides if the
+values stored in the environment or the standard serial in/output should be
+assigned to the console. This is useful if the environment values are not correct.
+If CFG_CONSOLE_ENV_OVERWRITE is defined the devices assigned to the console at
+start-up time will be written to the environment. This means that if the
+environment values are overwritten by the overwrite_console() routine, they will be
+stored in the environment.
+Changed files:
+- common/console.c
+
+Correct bootdelay intepretation:
+--------------------------------
+Changed bootdelay read from the environment from simple_strtoul (unsigned) to
+simple_strtol (signed), to be able to get a bootdelay of -1.
+Changed files:
+- common/main.c
+
+Todo:
+=====
+
+Block device support enhancement:
+---------------------------------
+Consider to unify the block device handling. Instead of using diskboot for IDE,
+scsiboot for SCSI and fdcboot for floppy disks, it would make sense to use only
+one command ("devboot" ???) with a parameter of the desired device ("hda1", "sda1",
+"fd0" ???) to boot from. The other ide commands can be handled in the same way
+("dev hda read.." instead of "ide read.." or "dev sda read.." instead of
+"scsi read..."). Todo this, a common way of assign a block device to its name
+(first found ide device = hda, second found hdb etc., or hda is device 0 on bus 0,
+hdb is device 1 on bus 0 etc.) as well as the names (hdx for ide, sdx for scsi, fx for
+floppy ???) must be defined.
+Maybe there are better ideas to do this.
+
+Console assingment:
+-------------------
+Consider to initialize and assign the console stdin, stdout and stderr as soon as
+possible to see the boot messages also on an other console than serial.
+
+
+Todo for PIP405:
+================
+
+LCD support for VGA:
+--------------------
+Add LCD support for the CT69000
+
+Default environment:
+--------------------
+Consider to write a default environment to the OTP part of the EEPROM and use it
+if the normal environment is not valid. Useful for serial# and ethaddr values.
+
+Watchdog:
+---------
+Implement Watchdog.
+
+Files clean-up:
+---------------
+Following files needs to be cleaned up:
+- cmd_pip405.c
+- flash.c
+- pci_pip405.c
+- pip405.c
+- pip405_isa.c
+Consider to split up the files in their functions.
diff --git a/doc/README.RPXlite b/doc/README.RPXlite
new file mode 100644
index 00000000000..25bf80b2a84
--- /dev/null
+++ b/doc/README.RPXlite
@@ -0,0 +1,887 @@
+# Porting U-Boot onto RPXlite board
+# Written by Yoo. Jonghoon
+# E-Mail : yooth@ipone.co.kr
+# IP ONE Inc.
+
+# Since 2001. 1. 29
+
+# Shell : bash
+# Cross-compile tools : Montavista Hardhat
+# Debugging tools : Windriver VisionProbe (PowerPC BDM)
+# ppcboot ver. : ppcboot-0.8.1
+
+###############################################################
+#	1. Hardware setting
+###############################################################
+
+1.1. Board, BDM settings
+	Install board, BDM, connect each other
+
+1.2. Save Register value
+	Boot with board-on monitor program and save the
+	register values with BDM.
+
+1.3. Configure flash programmer
+	Check flash memory area in the memory map.
+	0xFFC00000 - 0xFFFFFFFF
+
+	Boot monitor program is at
+	0xFFF00000
+
+	You can program on-board flash memory with VisionClick
+	flash programmer. Set the target flash device as:
+
+	29DL800B
+
+	(?) The flash memory device in the board *is* 29LV800B,
+		but I cannot program it with '29LV800B' option.
+		(in VisionClick flash programming tools)
+		I don't know why...
+
+1.4. Save boot monitor program *IMPORTANT*
+	Upload boot monitor program from board to file.
+	boot monitor program starts at 0xFFF00000
+
+1.5. Test flash memory programming
+	Try to erase boot program in the flash memory,
+	and re-write them.
+	*WARNING* YOU MUST SAVE BOOT PROGRAM TO FILE
+		BEFORE ERASING FLASH
+
+###############################################################
+#	2. U-Boot setting
+###############################################################
+
+2.1. Download U-Boot tarball at
+	ftp://ftp.denx.de
+	(The latest version is ppcboot-0.8.1.tar.bz2)
+
+	To extract the archive use the following syntax :
+	> bzip2 -cd ppcboot-0.8.1.tar.bz2 | tar xf -
+
+2.2. Add the following lines in '.profile'
+	export PATH=$PATH:/opt/hardhat/devkit/ppc/8xx/bin
+
+2.3. Make board specific config, for example:
+	> cd ppcboot-0.8.1
+	> make TQM860L_config
+
+	Now we can build ppcboot bin files.
+	After make all, you must see these files in your
+	ppcboot root directory.
+
+	ppcboot
+	ppcboot.bin
+	ppcboot.srec
+	ppcboot.map
+
+2.4. Make your own board directory into the
+	ppcboot-0.8.1/board
+	and make your board-specific files here.
+
+	For exmanple, tqm8xx files are composed of
+	.depend : Nothing
+	Makefile : To make config file
+	config.mk : Sets base address
+	flash.c : Flash memory control files
+	ppcboot.lds : linker(ld) script? (I don't know this yet)
+	tqm8xx.c : DRAM control and board check routines
+
+	And, add your board config lines in the
+	ppcboot-0.8.1/Makefile
+
+	Finally, add config_(your board).h file in the
+	ppcboot-0.8.1/include/
+
+	I've made board/rpxlite directory, and just copied
+	tqm8xx settings for now.
+
+	Rebuild ppcboot for rpxlite board:
+	> make rpxlite_config
+	> make
+
+###############################################################
+#	3. U-Boot porting
+###############################################################
+
+3.1. My RPXlite files are based on tqm8xx board files.
+	> cd board
+	> cp -r tqm8xx RPXLITE
+	> cd RPXLITE
+	> mv tqm8xx.c RPXLITE.c
+	> cd ../../include
+	> cp config_tqm8xx.h config_RPXLITE.h
+
+3.2. Modified files are:
+	board/RPXLITE/RPXLITE.c		/* DRAM-related routines */
+	board/RPXLITE/flash.c		/* flash-related routines */
+	board/RPXLITE/config.mk		/* set text base address */
+	cpu/mpc8xx/serial.c			/* board specific register setting */
+	include/config_RPXLITE.h	/* board specific registers */
+
+	See 'reg_config.txt' for register values in detail.
+
+###############################################################
+#	4. Running Linux
+###############################################################
+
+
+
+
+
+
+
+
+
+###############################################################
+#	Misc Information
+###############################################################
+
+mem_config.txt:
+===============
+
+Flash memory device : AM29LV800BB (1Mx8Bit) x 4 device
+manufacturer id : 01     (AMD)
+device id       : 5B     (AM29LV800B)
+size            : 4Mbyte
+sector #        : 19
+
+Sector information :
+
+number   start addr.     size
+00       FFC0_0000       64
+01       FFC1_0000       32
+02       FFC1_8000       32
+03       FFC2_0000       128
+04       FFC4_0000       256
+05       FFC8_0000       256
+06       FFCC_0000       256
+07       FFD0_0000       256
+08       FFD4_0000       256
+09       FFD8_0000       256
+10       FFDC_0000       256
+11       FFE0_0000       256
+12       FFE4_0000       256
+13       FFE8_0000       256
+14       FFEC_0000       256
+15       FFF0_0000       256
+16       FFF4_0000       256
+17       FFF8_0000       256
+18       FFFC_0000       256
+
+
+reg_config.txt:
+===============
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	SIU (System Interface Unit) */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+
+
+/*### IMMR */
+/*### Internal Memory Map Register */
+/*### Chap. 11.4.1 */
+
+	ISB		= 0xFA20		/* Set the Immap base = 0xFA20 0000 */
+	PARTNUM = 0x21
+	MASKNUM = 0x00
+
+	=> 0xFA20 2100
+
+---------------------------------------------------------------------
+
+/*### SIUMCR */
+/*### SIU Module Configuration Register */
+/*### Chap. 11.4.2 */
+/*### Offset : 0x0000 0000 */
+
+	EARB	= 0
+	EARP	= 0
+	DSHW	= 0
+	DBGC	= 0
+	DBPC	= 0
+	FRC		= 0
+	DLK		= 0
+	OPAR	= 0
+	PNCS	= 0
+	DPC		= 0
+	MPRE	= 0
+	MLRC	= 10		/* ~KR/~RETRY/~IRQ4/SPKROUT functions as ~KR/~TRTRY */
+	AEME	= 0
+	SEME	= 0
+	BSC		= 0
+	GB5E	= 0
+	B2DD	= 0
+	B3DD	= 0
+
+	=> 0x0000 0800
+
+---------------------------------------------------------------------
+
+/*### SYPCR */
+/*### System Protection Control Register */
+/*### Chap. 11.4.3 */
+/*### Offset : 0x0000 0004 */
+
+	SWTC	= 0xFFFF	/* SW watchdog timer count = 0xFFFF */
+	BMT		= 0x06		/* BUS monitoring timing */
+	BME		= 1			/* BUS monitor enable */
+	SWF		= 1
+	SWE		= 0			/* SW watchdog disable */
+	SWRI	= 0
+	SWP		= 1
+
+	=> 0xFFFF 0689
+
+---------------------------------------------------------------------
+
+/*### TESR */
+/*### Transfer Error Status Register */
+/*### Chap. 11.4.4 */
+/*### Offset : 0x0000 0020 */
+
+	IEXT	= 0
+	ITMT	= 0
+	IPB		= 0000
+	DEXT	= 0
+	DTMT	= 0
+	DPB		= 0000
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIPEND */
+/*### SIU Interrupt Pending Register */
+/*### Chap. 11.5.4.1 */
+/*### Offset : 0x0000 0010 */
+
+	IRQ0~IRQ7 = 0
+	LVL0~LVL7 = 0
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIMASK */
+/*### SIU Interrupt Mask Register */
+/*### Chap. 11.5.4.2 */
+/*### Offset : 0x0000 0014 */
+
+	IRM0~IRM7 = 0		/* Mask all interrupts */
+	LVL0~LVL7 = 0
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIEL */
+/*### SIU Interrupt Edge/Level Register */
+/*### Chap. 11.5.4.3 */
+/*### Offset : 0x0000 0018 */
+
+	ED0~ED7 = 0			/* Low level triggered */
+	WMn0~WMn7 = 0		/* Not allowed to exit from low-power mode */
+
+	=> 0x0000 0000
+
+---------------------------------------------------------------------
+
+/*### SIVEC */
+/*### SIU Interrupt Vector Register */
+/*### Chap. 11.5.4.4 */
+/*### Offset : 0x0000 001C */
+
+	INTC = 3C		/* The lowest interrupt is pending..(?) */
+
+	=> 0x3C00 0000
+
+---------------------------------------------------------------------
+
+/*### SWSR */
+/*### Software Service Register */
+/*### Chap. 11.7.1 */
+/*### Offset : 0x0000 001E */
+
+	SEQ = 0
+
+	=> 0x0000
+
+---------------------------------------------------------------------
+
+/*### SDCR */
+/*### SDMA Configuration Register */
+/*### Chap. 20.2.1 */
+/*### Offset : 0x0000 0032 */
+
+	FRZ = 0
+	RAID = 01	/* Priority level 5 (BR5) (normal operation) */
+
+	=> 0x0000 0001
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	UPMA (User Programmable Machine A) */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+
+/*### Chap. 16.6.4.1 */
+/*### Offset = 0x0000 017c */
+
+	T0  = CFFF CC24		/* Single Read */
+	T1  = 0FFF CC04
+	T2  = 0CAF CC04
+	T3  = 03AF CC08
+	T4  = 3FBF CC27		/* last */
+	T5  = FFFF CC25
+	T6  = FFFF CC25
+	T7  = FFFF CC25
+	T8  = CFFF CC24		/* Burst Read */
+	T9  = 0FFF CC04
+	T10 = 0CAF CC84
+	T11 = 03AF CC88
+	T12 = 3FBF CC27		/* last */
+	T13 = FFFF CC25
+	T14 = FFFF CC25
+	T15 = FFFF CC25
+	T16 = FFFF CC25
+	T17 = FFFF CC25
+	T18 = FFFF CC25
+	T19 = FFFF CC25
+	T20 = FFFF CC25
+	T21 = FFFF CC25
+	T22 = FFFF CC25
+	T23 = FFFF CC25
+	T24 = CFFF CC24		/* Single Write */
+	T25 = 0FFF CC04
+	T26 = 0CFF CC04
+	T27 = 03FF CC00
+	T28 = 3FFF CC27		/* last */
+	T29 = FFFF CC25
+	T30 = FFFF CC25
+	T31 = FFFF CC25
+	T32 = CFFF CC24		/* Burst Write */
+	T33 = 0FFF CC04
+	T34 = 0CFF CC80
+	T35 = 03FF CC8C
+	T36 = 0CFF CC00
+	T37 = 33FF CC27		/* last */
+	T38 = FFFF CC25
+	T39 = FFFF CC25
+	T40 = FFFF CC25
+	T41 = FFFF CC25
+	T42 = FFFF CC25
+	T43 = FFFF CC25
+	T44 = FFFF CC25
+	T45 = FFFF CC25
+	T46 = FFFF CC25
+	T47 = FFFF CC25
+	T48 = C0FF CC24		/* Refresh */
+	T49 = 03FF CC24
+	T50 = 0FFF CC24
+	T51 = 0FFF CC24
+	T52 = 3FFF CC27		/* last */
+	T53 = FFFF CC25
+	T54 = FFFF CC25
+	T55 = FFFF CC25
+	T56 = FFFF CC25
+	T57 = FFFF CC25
+	T58 = FFFF CC25
+	T59 = FFFF CC25
+	T60 = FFFF CC25		/* Exception */
+	T61 = FFFF CC25
+	T62 = FFFF CC25
+	T63 = FFFF CC25
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	UPMB */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### Chap. 16.6.4.1 */
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	MEMC */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### BR0 & OR0 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR0(0x0000 0100) & OR0(0x0000 0104) */
+/*### Flash memory */
+
+	BA   = 1111 1110 0000 0000 0	/* Base addr = 0xFE00 0000 */
+	AT   = 000
+	PS   = 00
+	PARE = 0
+	WP   = 0
+	MS   = 0				/* GPCM */
+	V    = 1				/* Valid */
+
+	=> 0xFE00 0001
+
+	AM            = 1111 1110 0000 0000 0	/* 32MBytes */
+	ATM           = 000
+	CSNT/SAM      = 0
+	ACS/G5LA,G5LS = 00
+	BIH           = 1			/* Burst inhibited */
+	SCY           = 0100		/* cycle length = 4 */
+	SETA          = 0
+	TRLX          = 0
+	EHTR          = 0
+
+	=> 0xFE00 0140
+
+/*### BR1 & OR1 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR1(0x0000 0108) & OR1(0x0000 010C) */
+/*### SDRAM */
+
+	BA   = 0000 0000 0000 0000 0	/* Base addr = 0x0000 0000 */
+	AT   = 000
+	PS   = 00
+	PARE = 0
+	WP   = 0
+	MS   = 1 				/* UPMA */
+	V    = 1				/* Valid */
+
+	=> 0x0000 0081
+
+	AM            = 1111 1110 0000 0000	/* 32MBytes */
+	ATM           = 000
+	CSNT/SAM      = 1
+	ACS/G5LA,G5LS = 11
+	BIH           = 0
+	SCY           = 0000		/* cycle length = 0 */
+	SETA          = 0
+	TRLX          = 0
+	EHTR          = 0
+
+	=> 0xFE00 0E00
+
+/*### BR2 & OR2 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR2(0x0000 0110) & OR2(0x0000 0114) */
+
+	BR2 & OR2 = 0x0000 0000		/* Not used */
+
+/*### BR3 & OR3 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR3(0x0000 0118) & OR3(0x0000 011C) */
+/*### BCSR */
+
+	BA   = 1111 1010 0100 0000 0	/* Base addr = 0xFA40 0000 */
+	AT   = 000
+	PS   = 00
+	PARE = 0
+	WP   = 0
+	MS   = 0 				/* GPCM */
+	V    = 1				/* Valid */
+
+	=> 0xFA40 0001
+
+	AM            = 1111 1111 0111 1111 1	/* (?) */
+	ATM           = 000
+	CSNT/SAM      = 1
+	ACS/G5LA,G5LS = 00
+	BIH           = 1			/* Burst inhibited */
+	SCY           = 0001		/* cycle length = 1 */
+	SETA          = 0
+	TRLX          = 0
+
+	=> 0xFF7F 8910
+
+/*### BR4 & OR4 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR4(0x0000 0120) & OR4(0x0000 0124) */
+/*### NVRAM & SRAM */
+
+	BA   = 1111 1010 0000 0000 0	/* Base addr = 0xFA00 0000 */
+	AT   = 000
+	PS   = 01
+	PARE = 0
+	WP   = 0
+	MS   = 0 				/* GPCM */
+	V    = 1				/* Valid */
+
+	=> 0xFA00 0401
+
+	AM            = 1111 1111 1111 1000 0	/* 8MByte */
+	ATM           = 000
+	CSNT/SAM      = 1
+	ACS/G5LA,G5LS = 00
+	BIH           = 1			/* Burst inhibited */
+	SCY           = 0111		/* cycle length = 7 */
+	SETA          = 0
+	TRLX          = 0
+
+	=> 0xFFF8 0970
+
+/*### BR5 & OR5 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR2(0x0000 0128) & OR2(0x0000 012C) */
+
+	BR5 & OR5 = 0x0000 0000		/* Not used */
+
+/*### BR6 & OR6 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR2(0x0000 0130) & OR2(0x0000 0134) */
+
+	BR6 & OR6 = 0x0000 0000		/* Not used */
+
+/*### BR7 & OR7 */
+/*### Base Registers & Option Registers */
+/*### Chap. 16.4.1 & 16.4.2 */
+/*### Offset : BR7(0x0000 0138) & OR7(0x0000 013C) */
+
+	BR7 & OR7 = 0x0000 0000		/* Not used */
+
+/*### MAR */
+/*### Memory Address Register */
+/*### Chap. 16.4.7 */
+/*### Offset : 0x0000 0164 */
+
+	MA = External memory address
+
+/*### MCR */
+/*### Memory Command Register */
+/*### Chap. 16.4.5 */
+/*### Offset : 0x0000 0168 */
+
+	OP   = xx			/* Command op code */
+	UM   = 1			/* Select UPMA */
+	MB   = 001			/* Select CS1 */
+	MCLF = xxxx			/* Loop times */
+	MAD  = xx xxxx		/* Memory array index */
+
+/*### MAMR */
+/*### Machine A Mode Register */
+/*### Chap. 16.4.4 */
+/*### Offset : 0x0000 0170 */
+
+	PTA = 0101 1000
+	PTAE = 1			/* Periodic timer A enabled */
+	AMA = 010
+	DSA = 00
+	G0CLA = 000
+	GPLA4DIS = 1
+	RLFA = 0100
+	WLFA = 0011
+	TLFA = 0000
+
+	=> 0x58A0 1430
+
+/*### MBMR */
+/*### Machine B Mode Register */
+/*### Chap. 16.4.4 */
+/*### Offset : 0x0000 0174 */
+
+	PTA = 0100 1110
+	PTAE = 0			/* Periodic timer B disabled */
+	AMA = 000
+	DSA = 00
+	G0CLA = 000
+	GPLA4DIS = 1
+	RLFA = 0000
+	WLFA = 0000
+	TLFA = 0000
+
+	=> 0x4E00 1000
+
+/*### MSTAT */
+/*### Memory Status Register */
+/*### Chap. 16.4.3 */
+/*### Offset : 0x0000 0178 */
+
+	PER0~PER7 = Parity error
+	WPER      = Write protection error
+
+	=> 0x0000
+
+/*### MPTPR */
+/*### Memory Periodic Timer Prescaler Register */
+/*### Chap. 16.4.8 */
+/*### Offset : 0x0000 017A */
+
+	PTP = 0000 1000		/* Divide by 8 */
+
+	=> 0x0800
+
+/*### MDR */
+/*### Memory Data Register */
+/*### Chap. 16.4.6 */
+/*### Offset : 0x0000 017C */
+
+	MD = Memory data contains the RAM array word
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	TIMERS */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### TBREFx */
+/*### Timebase Reference Registers */
+/*### Chap. 11.9.2 */
+/*### Offset : TBREFF0(0x0000 0204)/TBREFF1(0x0000 0208) */
+/*### (Locked) */
+
+	TBREFF0 = 0xFFFF FFFF
+	TBREFF1 = 0xFFFF FFFF
+
+---------------------------------------------------------------------
+
+/*### TBSCR */
+/*### Timebase Status and Control Registers */
+/*### Chap. 11.9.3 */
+/*### Offset : 0x0000 0200 */
+/*### (Locked) */
+
+	TBIRQ = 00000000
+	REF0  = 0
+	REF1  = 0
+	REFE0 = 0			/* Reference interrupt disable */
+	REFE1 = 0
+	TBF   = 1
+	TBE   = 1			/* Timebase enable */
+
+	=> 0x0003
+
+---------------------------------------------------------------------
+
+/*### RTCSC */
+/*### Real-Time Clock Status and Control Registers */
+/*### Chap. 11.10.1 */
+/*### Offset : 0x0000 0220 */
+/*### (Locked) */
+
+	RTCIRQ = 00000000
+	SEC = 1
+	ALR = 0
+	38K = 0				/* PITRTCLK is driven by 32.768KHz */
+	SIE = 0
+	ALE = 0
+	RTF = 0
+	RTE = 1				/* Real-Time clock enabled */
+
+	=> 0x0081
+
+---------------------------------------------------------------------
+
+/*### RTC */
+/*### Real-Time Clock Registers */
+/*### Chap. 11.10.2 */
+/*### Offset : 0x0000 0224 */
+/*### (Locked) */
+
+	RTC = Real time clock measured in second
+
+---------------------------------------------------------------------
+
+/*### RTCAL */
+/*### Real-Time Clock Alarm Registers */
+/*### Chap. 11.10.3 */
+/*### Offset : 0x0000 022C */
+/*### (Locked) */
+
+	ALARM = 0xFFFF FFFF
+
+---------------------------------------------------------------------
+
+/*### RTSEC */
+/*### Real-Time Clock Alarm Second Registers */
+/*### Chap. 11.10.4 */
+/*### Offset : 0x0000 0228 */
+/*### (Locked) */
+
+	COUNTER = Counter bits(fraction of a second)
+
+---------------------------------------------------------------------
+
+/*### PISCR */
+/*### Periodic Interrupt Status and Control Register */
+/*### Chap. 11.11.1 */
+/*### Offset : 0x0000 0240 */
+/*### (Locked) */
+
+	PIRQ = 0
+	PS   = 0		/* Write 1 to clear */
+	PIE  = 0
+	PITF = 1
+	PTE  = 0		/* PIT disabled */
+
+---------------------------------------------------------------------
+
+/*### PITC */
+/*### PIT Count Register */
+/*### Chap. 11.11.2 */
+/*### Offset : 0x0000 0244 */
+/*### (Locked) */
+
+	PITC = PIT count
+
+---------------------------------------------------------------------
+
+/*### PITR */
+/*### PIT Register */
+/*### Chap. 11.11.3 */
+/*### Offset : 0x0000 0248 */
+/*### (Locked) */
+
+	PIT = PIT count		/* Read only */
+
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	CLOCKS */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+
+---------------------------------------------------------------------
+
+/*### SCCR */
+/*### System Clock and Reset Control Register */
+/*### Chap. 15.6.1 */
+/*### Offset : 0x0000 0280 */
+/*### (Locked) */
+
+	COM    = 11		/* Clock output disabled */
+	TBS    = 1		/* Timebase frequency source is GCLK2 divided by 16 */
+	RTDIV  = 0		/* The clock is divided by 4 */
+	RTSEL  = 0		/* OSCM(Crystal oscillator) is selected */
+	CRQEN  = 0
+	PRQEN  = 0
+	EBDF   = 00		/* CLKOUT is GCLK2 divided by 1 */
+	DFSYNC = 00		/* Divided by 1 (normal operation) */
+	DFBRG  = 00		/* Divided by 1 (normal operation) */
+	DFNL   = 000
+	DFNH   = 000
+
+	=> 0x6200 0000
+
+---------------------------------------------------------------------
+
+/*### PLPRCR */
+/*### PLL, Low-Power, and Reset Control Register */
+/*### Chap. 15.6.2 */
+/*### Offset : 0x0000 0284 */
+/*### (Locked) */
+
+	MF    = 0x005	/* 48MHz (?) (  = 8MHz * (MF+1) ) */
+	SPLSS = 0
+	TEXPS = 0
+	TMIST = 0
+	CSRC  = 0		/* The general system clock is generated by the DFNH field */
+	LPM   = 00		/* Normal high/normal low mode */
+	CSR   = 0
+	LOLRE = 0
+	FIOPD = 0
+
+	=> 0x0050 0000
+
+---------------------------------------------------------------------
+
+/*### RSR */
+/*### Reset Status Register */
+/*### Chap. 12.2 */
+/*### Offset : 0x0000 0288 */
+/*### (Locked) */
+
+	EHRS  = External hard reset
+	ESRS  = External soft reset
+	LLRS  = Loss-of-lock reset
+	SWRS  = Software watchdog reset
+	CSRS  = Check stop reset
+	DBHRS = Debug port hard reset
+	DBSRS = Debug port soft reset
+	JTRS  = JTAG reset
+
+
+
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+/*	DMA */
+/* */
+/*------------------------------------------------------------------- */
+/*------------------------------------------------------------------- */
+---------------------------------------------------------------------
+
+/*### SDSR */
+/*### SDMA Status Register */
+/*### Chap. 20.2.2 */
+/*### Offset : 0x0000 0908 */
+
+	SBER = 0	/* SDMA channel bus error */
+	DSP2 = 0	/* DSP chain2 (Tx) interrupt */
+	DSP1 = 0	/* DSP chain1 (Rx) interrupt */
+
+	=> 0x00
+
+/*### SDMR */
+/*### SDMA Mask Register */
+/*### Chap. 20.2.3 */
+/*### Offset : 0x0000 090C */
+
+	SBER = 0
+	DSP2 = 0
+	DSP1 = 0	/* All interrupts are masked */
+
+	=> 0x00
+
+/*### SDAR */
+/*### SDMA Address Register */
+/*### Chap. 20.2.4 */
+/*### Offset : 0x0000 0904 */
+
+	AR = 0xxxxx xxxx	/* current system address */
+
+	=> 0xFA20 23AC
+
+/*### IDSRx */
+/*### IDMA Status Register */
+/*### Chap. 20.3.3.2 */
+/*### Offset : IDSR1(0x0000 0910) & IDSR2(0x0000 0918) */
+
+	AD   = 0
+	DONE = 0
+	OB   = 0
+
+	=> 0x00
+
+/*### IDMRx */
+/*### IDMA Mask Register */
+/*### Chap. 20.3.3.3 */
+/*### Offset : IDMR1(0x0000 0914) & IDMR2(0x0000 091C) */
+
+	AD   = 0
+	DONE = 0
+	OB   = 0
+
diff --git a/doc/README.Sandpoint8240 b/doc/README.Sandpoint8240
new file mode 100644
index 00000000000..5cb79b32d6a
--- /dev/null
+++ b/doc/README.Sandpoint8240
@@ -0,0 +1,397 @@
+The port was tested on a Sandpoint 8240 X3 board, with U-Boot
+installed in the flash memory of the CPU card. Please use the
+following DIP switch settings:
+
+Motherboard:
+
+SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
+SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
+
+SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
+SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
+
+
+CPU Card:
+
+SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
+SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
+
+SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
+SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
+
+
+
+The followind detailed description of installation and initial steps
+with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
+
+
+Directions for installing U-Boot on Sandpoint+Unity8240
+using the Abatron BDI2000 BDM/JTAG debugger ...
+
+Background and Reference info:
+http://u-boot.sourceforge.net/
+http://www.abatron.ch/
+http://www.abatron.ch/BDI/bdihw.html
+http://www.abatron.ch/DataSheets/BDI2000.pdf
+http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
+http://e-www.motorola.com/collateral/SPX3UM.pdf
+http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
+
+
+
+Connection Diagram:
+                                            ===========
+ ===                     =====             |-----      |
+|   | <---------------> |     |            |     |     |
+|PC |       rs232       | BDI |=============[]   |     |
+|   |                   |2000 |  BDM probe |     |     |
+|   | <---------------> |     |            |-----      |
+ ===       ethernet      =====             |           |
+                                           |           |
+                                            ===========
+                                         Sandpoint X3 with
+                                          Unity 8240 proc
+
+
+PART 1)
+  DIP Switch Settings:
+
+Sandpoint X3 8240 processor board DIP switch settings, with
+U-Boot to be installed in the flash memory of the CPU card:
+
+Motorola Sandpoint X3 Motherboard:
+SW1.1: on	SW1.2: on	SW1.3: on	SW1.4: on
+SW1.5: on	SW1.6: on	SW1.7: on	SW1.8: on
+SW2.1: on	SW2.2: on	SW2.3: on	SW2.4: on
+SW2.5: on	SW2.6: on	SW2.7: on	SW2.8: on
+
+Motorola Unity 8240 CPU Card:
+SW2.1: OFF	SW2.2: OFF	SW2.3: on	SW2.4: on
+SW2.5: OFF	SW2.6: OFF	SW2.7: OFF	SW2.8: OFF
+SW3.1: OFF	SW3.2: on	SW3.3: OFF	SW3.4: OFF
+SW3.5: on	SW3.6: OFF	SW3.7: OFF	SW3.8: on
+
+
+PART 2)
+  Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
+
+BDM Pin 1 on the Unity 8240 processor board is towards the
+PCI PMC connectors, or away from the socketed SDRAM, i.e.:
+
+  ====================
+  | ---------------- |
+  | |    SDRAM     | |
+  | |              | |
+  | ---------------- |
+  | |~|              |
+  | |B|       ++++++ |
+  | |D|       + uP + |
+  | |M|       +8240+ |
+  |  ~ 1      ++++++ |
+  |                  |
+  |                  |
+  |                  |
+  | PMC conn ======  |
+  |   =====  ======  |
+  |                  |
+  ====================
+
+
+PART 3)
+  Setting up the BDI2000, and preparing for TCP/IP network comms:
+
+Connect the BDI2000 to the PC using the supplied serial cable.
+Download the BDI2000 software and install it using setup.exe.
+
+[Note: of course you  can  also  use  the  Linux  command  line  tool
+"bdisetup"  to  configure  your BDI2000 - the sources are included on
+the floppy disk that comes with your BDI2000. Just in case you  don't
+have any Windows PC's - like me :-)   -- wd ]
+
+Power up the BDI2000; then follow directions to assign the IP
+address and related network information.  Note that U-Boot
+will be loaded to the Sandpoint via tftp.  You need to either
+use the Abatron-provided tftp application or provide a tftp
+server (e.g. Linux/Solaris/*BSD) somewhere on your network.
+Once the IP address etc are assigned via the RS232 port,
+further communication with the BDI2000 will happen via the
+ethernet connection.
+
+PART 4)
+  Making a TCP/IP network connection to the Abatron BDI2000:
+
+Telnet to the Abatron BDI2000.  Assuming that all of the
+networking info was loaded via RS232 correctly, you will see
+the following (scrolling):
+
+- TARGET: waiting for target Vcc
+- TARGET: waiting for target Vcc
+
+
+PART 5)
+  Power up the target Sandpoint:
+If the BDM connections are correct, the following will now appear:
+
+- TARGET: waiting for target Vcc
+- TARGET: waiting for target Vcc
+- TARGET: processing power-up delay
+- TARGET: processing user reset request
+- BDI asserts HRESET
+- Reset JTAG controller passed
+- Bypass check: 0x55 => 0xAA
+- Bypass check: 0x55 => 0xAA
+- JTAG exists check passed
+- Target PVR is 0x00810101
+- COP status is 0x01
+- Check running state passed
+- BDI scans COP freeze command
+- BDI removes HRESET
+- COP status is 0x05
+- Check stopped state passed
+- Check LSRL length passed
+- BDI sets breakpoint at 0xFFF00100
+- BDI resumes program execution
+- Waiting for target stop passed
+- TARGET: Target PVR is 0x00810101
+- TARGET: reseting target passed
+- TARGET: processing target startup ....
+- TARGET: processing target startup passed
+BDI>
+
+
+PART 6)
+  Erase the current contents of the flash memory:
+
+BDI>era 0xFFF00000
+    Erasing flash at 0xfff00000
+    Erasing flash passed
+BDI>era 0xFFF04000
+    Erasing flash at 0xfff04000
+    Erasing flash passed
+BDI>era 0xFFF06000
+    Erasing flash at 0xfff06000
+    Erasing flash passed
+BDI>era 0xFFF08000
+    Erasing flash at 0xfff08000
+    Erasing flash passed
+BDI>era 0xFFF10000
+    Erasing flash at 0xfff10000
+    Erasing flash passed
+BDI>era 0xFFF20000
+    Erasing flash at 0xfff20000
+    Erasing flash passed
+
+
+PART 7)
+  Program the flash memory with the U-Boot image:
+
+BDI>prog 0xFFF00000 u-boot.bin bin
+    Programming u-boot.bin , please wait ....
+    Programming flash passed
+
+
+PART 8)
+  Connect PC to Sandpoint:
+Using a crossover serial cable, attach the PC serial port to the
+Sandpoint's COM1.  Set communications parameters to 8N1 / 9600 baud.
+
+
+PART 9)
+  Reset the Unity and begin U-Boot execution:
+
+BDI>reset
+- TARGET: processing user reset request
+- TARGET: Target PVR is 0x00810101
+- TARGET: reseting target passed
+- TARGET: processing target init list ....
+- TARGET: processing target init list passed
+
+BDI>go
+
+Now see output from U-Boot running, sent via serial port:
+
+U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
+
+CPU:   MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: Sandpoint 8240 Unity
+DRAM:  64 MB
+FLASH:  2 MB
+PCI:    scanning bus0 ...
+  bus dev fn venID devID class  rev MBAR0    MBAR1    IPIN ILINE
+  00  00  00 1057  0003  060000 13  00000008 00000000 01   00
+  00  0b  00 10ad  0565  060100 10  00000000 00000000 00   00
+  00  0f  00 8086  1229  020000 08  80000000 80000001 01   00
+In:    serial
+Out:   serial
+Err:   serial
+=>
+
+
+PART 10)
+  Set and save any required environmental variables, examples of some:
+
+=> setenv ethaddr 00:03:47:97:D0:79
+=> setenv bootfile your_qnx_image_here
+=> setenv hostname sandpointX
+=> setenv netmask 255.255.255.0
+=> setenv ipaddr 192.168.0.11
+=> setenv serverip 192.168.0.10
+=> setenv gatewayip=192.168.0.1
+=> saveenv
+Saving Enviroment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=>
+
+**** Example environment: ****
+
+=> printenv
+baudrate=9600
+bootfile=telemetry
+hostname=sp1
+ethaddr=00:03:47:97:E4:6B
+load=tftp 100000 u-boot.bin
+update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 $(filesize);saveenv
+filesize=1f304
+gatewayip=145.17.228.1
+netmask=255.255.255.0
+ipaddr=145.17.228.42
+serverip=145.17.242.46
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 332/8188 bytes
+=>
+
+here's some text useful stuff for cut-n-paste:
+setenv hostname sandpoint1
+setenv netmask 255.255.255.0
+setenv ipaddr 145.17.228.81
+setenv serverip 145.17.242.46
+setenv gatewayip 145.17.228.1
+saveenv
+
+PART 11)
+  Test U-Boot by tftp'ing new U-Boot, overwriting current:
+
+=> protect off all
+Un-Protect Flash Bank # 1
+=> tftp 100000 u-boot.bin
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 127628 (1f28c hex)
+=> era all
+Erase Flash Bank # 1
+ done
+Erase Flash Bank # 2 - missing
+=> cp.b 0x100000 FFF00000 1f28c
+Copy to Flash... done
+=> saveenv
+Saving Enviroment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=> reset
+
+You can put these commands into some environment variables;
+
+=> setenv load tftp 100000 u-boot.bin
+=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \$(filesize)\;saveenv
+=> saveenv
+
+Then you just have to type "run load" then "run update"
+
+=> run load
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 127748 (1f304 hex)
+=> run update
+Un-Protect Flash Bank # 1
+Un-Protect Flash Bank # 2
+Erase Flash from 0xfff00000 to 0xfff3ffff
+ done
+Erased 7 sectors
+Copy to Flash... done
+Saving Enviroment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=>
+
+
+PART 12)
+  Load OS image (ELF format) via U-Boot using tftp
+
+
+=> tftp 800000 sandpoint-simple.elf
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'sandpoint-simple.elf'.
+Load address: 0x800000
+Loading: #################################################################
+         #################################################################
+         #################################################################
+         ########################
+done
+Bytes transferred = 1120284 (11181c hex)
+==>
+
+PART 13)
+  Begin OS image execution: (note that unless you have the
+serial parameters of your OS image set to 9600 (i.e. same as
+the U-Boot binary) you will get garbage here until you change
+the serial communications speed.
+
+=> bootelf 800000
+Loading  @ 0x001f0100 (1120028 bytes)
+## Starting application at 0x001f1d28 ...
+Replace init_hwinfo() with a board specific version
+
+Loading QNX6....
+
+Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
+<...loader and kernel messages snipped...>
+
+Welcome to Neutrino on the Sandpoint
+#
+
+
+other information:
+
+CVS Retrieval Notes:
+
+U-Boot's SourceForge CVS repository can be checked out
+through anonymous (pserver) CVS with the following
+instruction set. The module you wish to check out must
+be specified as the modulename. When prompted for a
+password for anonymous, simply press the Enter key.
+
+cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
+
+cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
+
diff --git a/drivers/3c589.c b/drivers/3c589.c
new file mode 100644
index 00000000000..541f93b712b
--- /dev/null
+++ b/drivers/3c589.c
@@ -0,0 +1,522 @@
+/*------------------------------------------------------------------------
+ . 3c589.c
+ . This is a driver for 3Com's 3C589 (Etherlink III) PCMCIA Ethernet device.
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ .
+ ----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_3C589
+
+#include "3c589.h"
+
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN	0
+
+#define NO_AUTOPROBE
+
+static const char version[] =
+	"Your ad here! :P\n";
+
+
+#undef EL_DEBUG
+
+typedef unsigned char byte;
+typedef unsigned short word;
+typedef unsigned long int dword;
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Wait time for memory to be free.  This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+
+#if (EL_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if EL_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef EL_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+#define outb(args...)	mmio_outb(args)
+#define mmio_outb(value, addr)	(*((volatile byte *)(addr)) = value)
+
+#define inb(args...)	mmio_inb(args)
+#define mmio_inb(addr) (*((volatile byte *)(addr)))
+
+#define outw(args...)	mmio_outw(args)
+#define mmio_outw(value, addr)	(*((volatile word *)(addr)) = value)
+
+#define inw(args...)	mmio_inw(args)
+#define mmio_inw(addr) (*((volatile word *)(addr)))
+
+#define outsw(args...)	mmio_outsw(args)
+#define mmio_outsw(r,b,l)	({	int __i; \
+					word *__b2; \
+					__b2 = (word *) b; \
+					for (__i = 0; __i < l; __i++) { \
+					    mmio_outw( *(__b2 + __i), r); \
+					} \
+				})
+
+#define insw(args...)	mmio_insw(args)
+#define mmio_insw(r,b,l) 	({	int __i ;  \
+					word *__b2;  \
+			    		__b2 = (word *) b;  \
+			    		for (__i = 0; __i < l; __i++) {  \
+					  *(__b2 + __i) = mmio_inw(r);  \
+					  mmio_inw(0);  \
+					};  \
+				})
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver.  If you are changing anything
+ . here with the 3Com stuff, you should have the datasheet and know
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define EL_BASE_ADDR	0x20000000
+
+
+/* Offsets from base I/O address. */
+#define EL3_DATA	0x00
+#define EL3_TIMER	0x0a
+#define EL3_CMD		0x0e
+#define EL3_STATUS	0x0e
+
+#define EEPROM_READ	0x0080
+
+#define EL3WINDOW(win_num) mmio_outw(SelectWindow + (win_num), EL_BASE_ADDR + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+   11 bits are the parameter, if applicable. */
+enum c509cmd {
+    TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+    RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+    TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+    FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+    SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+    SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+    StatsDisable = 22<<11, StopCoax = 23<<11,
+};
+
+enum c509status {
+    IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+    TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+    IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+    RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO		0x00
+#define RX_FIFO		0x00
+#define RX_STATUS 	0x08
+#define TX_STATUS 	0x0B
+#define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
+
+
+/*
+  Read a word from the EEPROM using the regular EEPROM access register.
+  Assume that we are in register window zero.
+*/
+static word read_eeprom(dword ioaddr, int index)
+{
+    int i;
+    outw(EEPROM_READ + index, ioaddr + 0xa);
+    /* Reading the eeprom takes 162 us */
+    for (i = 1620; i >= 0; i--)
+	if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+	    break;
+    return inw(ioaddr + 0xc);
+}
+
+static void el_get_mac_addr( unsigned char *mac_addr )
+{
+	int i;
+	union
+	{
+		word w;
+		unsigned char b[2];
+	} wrd;
+	unsigned char old_window = inw( EL_BASE_ADDR + EL3_STATUS ) >> 13;
+	GO_WINDOW(0);
+	VX_BUSY_WAIT;
+	for (i = 0; i < 3; i++)
+	{
+		wrd.w = read_eeprom(EL_BASE_ADDR, 0xa+i);
+#ifdef __BIG_ENDIAN
+		mac_addr[2*i]   = wrd.b[0];
+		mac_addr[2*i+1] = wrd.b[1];
+#else
+		mac_addr[2*i]   = wrd.b[1];
+		mac_addr[2*i+1] = wrd.b[0];
+#endif
+	}
+	GO_WINDOW(old_window);
+	VX_BUSY_WAIT;
+}
+
+
+#if EL_DEBUG > 1
+static void print_packet( byte * buf, int length )
+{
+        int i;
+        int remainder;
+        int lines;
+
+        PRINTK2("Packet of length %d \n", length );
+
+        lines = length / 16;
+        remainder = length % 16;
+
+        for ( i = 0; i < lines ; i ++ ) {
+                int cur;
+
+                for ( cur = 0; cur < 8; cur ++ ) {
+                        byte a, b;
+
+                        a = *(buf ++ );
+                        b = *(buf ++ );
+                        PRINTK2("%02x%02x ", a, b );
+                }
+                PRINTK2("\n");
+        }
+        for ( i = 0; i < remainder/2 ; i++ ) {
+                byte a, b;
+
+                a = *(buf ++ );
+                b = *(buf ++ );
+                PRINTK2("%02x%02x ", a, b );
+        }
+        PRINTK2("\n");
+}
+#endif /* EL_DEBUG > 1 */
+
+
+
+/**************************************************************************
+ETH_RESET - Reset adapter
+***************************************************************************/
+static void el_reset(bd_t *bd)
+{
+	/***********************************************************
+			Reset 3Com 595 card
+	*************************************************************/
+	/* QUICK HACK
+	 * - adjust timing for 3c589
+	 * - enable io for PCMCIA */
+	outw(0x0004, 0xa0000018);
+	udelay(100);
+	outw(0x0041, 0x28010000);
+	udelay(100);
+
+	/* issue global reset */
+	outw(GLOBAL_RESET, BASE + VX_COMMAND);
+
+	/* must wait for at least 1ms */
+	udelay(100000000);
+
+	/* set mac addr */
+	{
+		unsigned char *mac_addr = bd->bi_enetaddr;
+		int i;
+
+		el_get_mac_addr( mac_addr );
+
+		GO_WINDOW(2);
+		VX_BUSY_WAIT;
+
+		printf("3C589 MAC Addr.: ");
+		for (i = 0; i < 6; i++)
+		{
+			printf("%02x", mac_addr[i]);
+			outb(mac_addr[i], BASE + VX_W2_ADDR_0 + i);
+			VX_BUSY_WAIT;
+		}
+		printf("\n\n");
+	}
+
+	/* set RX filter */
+	outw(SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+
+	/* set irq mask and read_zero */
+	outw(SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	outw(SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
+		S_TX_COMPLETE | S_TX_AVAIL, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	/* enable TP Linkbeat */
+	GO_WINDOW(4);
+	VX_BUSY_WAIT;
+
+	outw( ENABLE_UTP, BASE + VX_W4_MEDIA_TYPE);
+	VX_BUSY_WAIT;
+
+
+/*
+ * Attempt to get rid of any stray interrupts that occured during
+ * configuration.  On the i386 this isn't possible because one may
+ * already be queued.  However, a single stray interrupt is
+ * unimportant.
+ */
+
+	outw(ACK_INTR | 0xff, BASE + VX_COMMAND);
+	VX_BUSY_WAIT;
+
+	/* enable TX and RX */
+	outw( RX_ENABLE, BASE + VX_COMMAND );
+	VX_BUSY_WAIT;
+
+	outw( TX_ENABLE, BASE + VX_COMMAND );
+	VX_BUSY_WAIT;
+
+
+	/* print the diag. regs. */
+	PRINTK2("Diag. Regs\n");
+	PRINTK2("--> MEDIA_TYPE:   %04x\n", inw(BASE + VX_W4_MEDIA_TYPE));
+	PRINTK2("--> NET_DIAG:     %04x\n", inw(BASE + VX_W4_NET_DIAG));
+	PRINTK2("--> FIFO_DIAG:    %04x\n", inw(BASE + VX_W4_FIFO_DIAG));
+	PRINTK2("--> CTRLR_STATUS: %04x\n", inw(BASE + VX_W4_CTRLR_STATUS));
+	PRINTK2("\n\n");
+
+	/* enter working mode */
+	GO_WINDOW(1);
+	VX_BUSY_WAIT;
+
+	/* wait for another 1ms */
+	udelay(100000000);
+}
+
+
+/*-----------------------------------------------------------------
+ .
+ .  The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------  */
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+int eth_init(bd_t *bd)
+{
+	el_reset(bd);
+	return 0;
+}
+
+void eth_halt() {
+	return;
+}
+
+#define EDEBUG 1
+
+
+/**************************************************************************
+ETH_POLL - Wait for a frame
+***************************************************************************/
+
+int eth_rx()
+{
+	word status, rx_status, packet_size;
+
+	VX_BUSY_WAIT;
+
+	status = inw( BASE + VX_STATUS );
+
+	if ( (status & S_RX_COMPLETE) == 0 ) return 0; /* nothing to do */
+
+	/* Packet waiting -> check RX_STATUS */
+	rx_status = inw( BASE + VX_W1_RX_STATUS );
+
+	if ( rx_status & ERR_RX )
+	{
+		/* error in packet -> discard */
+		PRINTK("[ERROR] Invalid packet -> discarding\n");
+		PRINTK("-- error code 0x%02x\n", rx_status & ERR_MASK);
+		PRINTK("-- rx bytes 0x%04d\n", rx_status & ((1<<11) - 1));
+		PRINTK("[ERROR] Invalid packet -> discarding\n");
+		outw( RX_DISCARD_TOP_PACK, BASE + VX_COMMAND );
+		return 0;
+	}
+
+	/* correct pack. waiting in fifo */
+	packet_size = rx_status & RX_BYTES_MASK;
+
+	PRINTK("Correct packet waiting in fifo, size: %d\n", packet_size);
+
+	{
+		volatile word *packet_start = (word *)(BASE + VX_W1_RX_PIO_RD_1);
+		word *RcvBuffer = (word *)(NetRxPackets[0]);
+		int wcount = 0;
+
+		for (wcount = 0; wcount < (packet_size >> 1); wcount++)
+		{
+			*RcvBuffer++ = *(packet_start);
+		}
+
+		/* handle odd packets */
+		if ( packet_size & 1 )
+		{
+			*RcvBuffer++ = *(packet_start);
+		}
+	}
+
+	/* fifo should now be empty (besides the padding bytes) */
+	if ( ((*((word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK) > 3 )
+	{
+		PRINTK("[ERROR] Fifo not empty after packet read (remaining pkts: %d)\n",
+			(((*(word *)(BASE + VX_W1_RX_STATUS))) & RX_BYTES_MASK));
+	}
+
+	/* discard packet */
+	*((word *)(BASE + VX_COMMAND)) = RX_DISCARD_TOP_PACK;
+
+	/* Pass Packets to upper Layer */
+	NetReceive(NetRxPackets[0], packet_size);
+	return packet_size;
+}
+
+
+
+/**************************************************************************
+ETH_TRANSMIT - Transmit a frame
+***************************************************************************/
+static char padmap[] = {
+	0, 3, 2, 1};
+
+
+int eth_send(volatile void *packet, int length) {
+	int pad;
+	int status;
+	volatile word *buf = (word *)packet;
+	int dummy = 0;
+
+	/* padding stuff */
+	pad = padmap[length & 3];
+
+	PRINTK("eth_send(), length: %d\n", length);
+	/* drop acknowledgements */
+	while(( status=inb(EL_BASE_ADDR + VX_W1_TX_STATUS) )& TXS_COMPLETE ) {
+		if(status & (TXS_UNDERRUN|TXS_MAX_COLLISION|TXS_STATUS_OVERFLOW)) {
+			outw(TX_RESET, EL_BASE_ADDR + VX_COMMAND);
+			outw(TX_ENABLE, EL_BASE_ADDR + VX_COMMAND);
+			PRINTK("Bad status, resetting and reenabling transmitter\n");
+		}
+
+		outb(0x0, EL_BASE_ADDR + VX_W1_TX_STATUS);
+	}
+
+
+	while (inw(EL_BASE_ADDR + VX_W1_FREE_TX) < length + pad + 4) {
+		/* no room in FIFO */
+		if (dummy == 0)
+		{
+			PRINTK("No room in FIFO, waiting...\n");
+			dummy++;
+		}
+
+	}
+
+	PRINTK("    ---> FIFO ready\n");
+
+
+	outw(length, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+
+	/* Second dword meaningless */
+	outw(0x0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+
+#if EL_DEBUG > 1
+	print_packet((byte *)buf, length);
+#endif
+
+	/* write packet */
+	{
+		unsigned int i, totw;
+
+		totw = ((length + 1) >> 1);
+		PRINTK("Buffer: (totw = %d)\n", totw);
+		for (i = 0; i < totw; i++) {
+			outw( *(buf+i), EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+			udelay(10);
+		}
+		if(totw & 1)
+		{	/* pad to double word length */
+			outw( 0, EL_BASE_ADDR + VX_W1_TX_PIO_WR_1);
+			udelay(10);
+		}
+		PRINTK("\n\n");
+	}
+
+        /* wait for Tx complete */
+	PRINTK("Waiting for Tx to complete...\n");
+        while(((status = inw(EL_BASE_ADDR + VX_STATUS)) & S_COMMAND_IN_PROGRESS) != 0)
+	{
+		udelay(10);
+	}
+	PRINTK("   ---> Tx completed, status = 0x%04x\n", status);
+
+	return length;
+}
+
+
+
+#endif /* CONFIG_DRIVER_3C589 */
diff --git a/drivers/bcm570x_autoneg.c b/drivers/bcm570x_autoneg.c
new file mode 100644
index 00000000000..1818c6a2714
--- /dev/null
+++ b/drivers/bcm570x_autoneg.c
@@ -0,0 +1,444 @@
+/******************************************************************************/
+/*                                                                            */
+/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom         */
+/* Corporation.                                                               */
+/* All rights reserved.                                                       */
+/*                                                                            */
+/* This program is free software; you can redistribute it and/or modify       */
+/* it under the terms of the GNU General Public License as published by       */
+/* the Free Software Foundation, located in the file LICENSE.                 */
+/*                                                                            */
+/* History:                                                                   */
+/******************************************************************************/
+#if !defined(CONFIG_NET_MULTI)
+#if INCLUDE_TBI_SUPPORT
+#include "bcm570x_autoneg.h"
+#include "bcm570x_mm.h"
+
+
+
+/******************************************************************************/
+/* Description:                                                               */
+/*                                                                            */
+/* Return:                                                                    */
+/******************************************************************************/
+void
+MM_AnTxConfig(
+    PAN_STATE_INFO pAnInfo)
+{
+    PLM_DEVICE_BLOCK pDevice;
+
+    pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
+
+    REG_WR(pDevice, MacCtrl.TxAutoNeg, (LM_UINT32) pAnInfo->TxConfig.AsUSHORT);
+
+    pDevice->MacMode |= MAC_MODE_SEND_CONFIGS;
+    REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
+}
+
+
+
+/******************************************************************************/
+/* Description:                                                               */
+/*                                                                            */
+/* Return:                                                                    */
+/******************************************************************************/
+void
+MM_AnTxIdle(
+    PAN_STATE_INFO pAnInfo)
+{
+    PLM_DEVICE_BLOCK pDevice;
+
+    pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
+
+    pDevice->MacMode &= ~MAC_MODE_SEND_CONFIGS;
+    REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
+}
+
+
+
+/******************************************************************************/
+/* Description:                                                               */
+/*                                                                            */
+/* Return:                                                                    */
+/******************************************************************************/
+char
+MM_AnRxConfig(
+    PAN_STATE_INFO pAnInfo,
+    unsigned short *pRxConfig)
+{
+    PLM_DEVICE_BLOCK pDevice;
+    LM_UINT32 Value32;
+    char Retcode;
+
+    Retcode = AN_FALSE;
+
+    pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
+
+    Value32 = REG_RD(pDevice, MacCtrl.Status);
+    if(Value32 & MAC_STATUS_RECEIVING_CFG)
+    {
+        Value32 = REG_RD(pDevice, MacCtrl.RxAutoNeg);
+        *pRxConfig = (unsigned short) Value32;
+
+        Retcode = AN_TRUE;
+    }
+
+    return Retcode;
+}
+
+
+
+/******************************************************************************/
+/* Description:                                                               */
+/*                                                                            */
+/* Return:                                                                    */
+/******************************************************************************/
+void
+AutonegInit(
+    PAN_STATE_INFO pAnInfo)
+{
+    unsigned long j;
+
+    for(j = 0; j < sizeof(AN_STATE_INFO); j++)
+    {
+        ((unsigned char *) pAnInfo)[j] = 0;
+    }
+
+    /* Initialize the default advertisement register. */
+    pAnInfo->mr_adv_full_duplex = 1;
+    pAnInfo->mr_adv_sym_pause = 1;
+    pAnInfo->mr_adv_asym_pause = 1;
+    pAnInfo->mr_an_enable = 1;
+}
+
+
+
+/******************************************************************************/
+/* Description:                                                               */
+/*                                                                            */
+/* Return:                                                                    */
+/******************************************************************************/
+AUTONEG_STATUS
+Autoneg8023z(
+    PAN_STATE_INFO pAnInfo)
+{
+    unsigned short RxConfig;
+    unsigned long Delta_us;
+    AUTONEG_STATUS AnRet;
+
+    /* Get the current time. */
+    if(pAnInfo->State == AN_STATE_UNKNOWN)
+    {
+        pAnInfo->RxConfig.AsUSHORT = 0;
+        pAnInfo->CurrentTime_us = 0;
+        pAnInfo->LinkTime_us = 0;
+        pAnInfo->AbilityMatchCfg = 0;
+        pAnInfo->AbilityMatchCnt = 0;
+        pAnInfo->AbilityMatch = AN_FALSE;
+        pAnInfo->IdleMatch = AN_FALSE;
+        pAnInfo->AckMatch = AN_FALSE;
+    }
+
+    /* Increment the timer tick.  This function is called every microsecon. */
+/*    pAnInfo->CurrentTime_us++; */
+
+    /* Set the AbilityMatch, IdleMatch, and AckMatch flags if their */
+    /* corresponding conditions are satisfied. */
+    if(MM_AnRxConfig(pAnInfo, &RxConfig))
+    {
+        if(RxConfig != pAnInfo->AbilityMatchCfg)
+        {
+            pAnInfo->AbilityMatchCfg = RxConfig;
+            pAnInfo->AbilityMatch = AN_FALSE;
+            pAnInfo->AbilityMatchCnt = 0;
+        }
+        else
+        {
+            pAnInfo->AbilityMatchCnt++;
+            if(pAnInfo->AbilityMatchCnt > 1)
+            {
+                pAnInfo->AbilityMatch = AN_TRUE;
+                pAnInfo->AbilityMatchCfg = RxConfig;
+            }
+        }
+
+        if(RxConfig & AN_CONFIG_ACK)
+        {
+            pAnInfo->AckMatch = AN_TRUE;
+        }
+        else
+        {
+            pAnInfo->AckMatch = AN_FALSE;
+        }
+
+        pAnInfo->IdleMatch = AN_FALSE;
+    }
+    else
+    {
+        pAnInfo->IdleMatch = AN_TRUE;
+
+        pAnInfo->AbilityMatchCfg = 0;
+        pAnInfo->AbilityMatchCnt = 0;
+        pAnInfo->AbilityMatch = AN_FALSE;
+        pAnInfo->AckMatch = AN_FALSE;
+
+        RxConfig = 0;
+    }
+
+    /* Save the last Config. */
+    pAnInfo->RxConfig.AsUSHORT = RxConfig;
+
+    /* Default return code. */
+    AnRet = AUTONEG_STATUS_OK;
+
+    /* Autoneg state machine as defined in 802.3z section 37.3.1.5. */
+    switch(pAnInfo->State)
+    {
+        case AN_STATE_UNKNOWN:
+            if(pAnInfo->mr_an_enable || pAnInfo->mr_restart_an)
+            {
+                pAnInfo->CurrentTime_us = 0;
+                pAnInfo->State = AN_STATE_AN_ENABLE;
+            }
+
+            /* Fall through.*/
+
+        case AN_STATE_AN_ENABLE:
+            pAnInfo->mr_an_complete = AN_FALSE;
+            pAnInfo->mr_page_rx = AN_FALSE;
+
+            if(pAnInfo->mr_an_enable)
+            {
+                pAnInfo->LinkTime_us = 0;
+                pAnInfo->AbilityMatchCfg = 0;
+                pAnInfo->AbilityMatchCnt = 0;
+                pAnInfo->AbilityMatch = AN_FALSE;
+                pAnInfo->IdleMatch = AN_FALSE;
+                pAnInfo->AckMatch = AN_FALSE;
+
+                pAnInfo->State = AN_STATE_AN_RESTART_INIT;
+            }
+            else
+            {
+                pAnInfo->State = AN_STATE_DISABLE_LINK_OK;
+            }
+            break;
+
+        case AN_STATE_AN_RESTART_INIT:
+            pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
+            pAnInfo->mr_np_loaded = AN_FALSE;
+
+            pAnInfo->TxConfig.AsUSHORT = 0;
+            MM_AnTxConfig(pAnInfo);
+
+            AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+
+            pAnInfo->State = AN_STATE_AN_RESTART;
+
+            /* Fall through.*/
+
+        case AN_STATE_AN_RESTART:
+            /* Get the current time and compute the delta with the saved */
+            /* link timer. */
+            Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
+            if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
+            {
+                pAnInfo->State = AN_STATE_ABILITY_DETECT_INIT;
+            }
+            else
+            {
+                AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+            }
+            break;
+
+        case AN_STATE_DISABLE_LINK_OK:
+            AnRet = AUTONEG_STATUS_DONE;
+            break;
+
+        case AN_STATE_ABILITY_DETECT_INIT:
+            /* Note: in the state diagram, this variable is set to */
+            /* mr_adv_ability<12>.  Is this right?. */
+            pAnInfo->mr_toggle_tx = AN_FALSE;
+
+            /* Send the config as advertised in the advertisement register. */
+            pAnInfo->TxConfig.AsUSHORT = 0;
+            pAnInfo->TxConfig.D5_FD = pAnInfo->mr_adv_full_duplex;
+            pAnInfo->TxConfig.D6_HD = pAnInfo->mr_adv_half_duplex;
+            pAnInfo->TxConfig.D7_PS1 = pAnInfo->mr_adv_sym_pause;
+            pAnInfo->TxConfig.D8_PS2 = pAnInfo->mr_adv_asym_pause;
+            pAnInfo->TxConfig.D12_RF1 = pAnInfo->mr_adv_remote_fault1;
+            pAnInfo->TxConfig.D13_RF2 = pAnInfo->mr_adv_remote_fault2;
+            pAnInfo->TxConfig.D15_NP = pAnInfo->mr_adv_next_page;
+
+            MM_AnTxConfig(pAnInfo);
+
+            pAnInfo->State = AN_STATE_ABILITY_DETECT;
+
+            break;
+
+        case AN_STATE_ABILITY_DETECT:
+            if(pAnInfo->AbilityMatch == AN_TRUE &&
+                pAnInfo->RxConfig.AsUSHORT != 0)
+            {
+                pAnInfo->State = AN_STATE_ACK_DETECT_INIT;
+            }
+
+            break;
+
+        case AN_STATE_ACK_DETECT_INIT:
+            pAnInfo->TxConfig.D14_ACK = 1;
+            MM_AnTxConfig(pAnInfo);
+
+            pAnInfo->State = AN_STATE_ACK_DETECT;
+
+            /* Fall through. */
+
+        case AN_STATE_ACK_DETECT:
+            if(pAnInfo->AckMatch == AN_TRUE)
+            {
+                if((pAnInfo->RxConfig.AsUSHORT & ~AN_CONFIG_ACK) ==
+                    (pAnInfo->AbilityMatchCfg & ~AN_CONFIG_ACK))
+                {
+                    pAnInfo->State = AN_STATE_COMPLETE_ACK_INIT;
+                }
+                else
+                {
+                    pAnInfo->State = AN_STATE_AN_ENABLE;
+                }
+            }
+            else if(pAnInfo->AbilityMatch == AN_TRUE &&
+                pAnInfo->RxConfig.AsUSHORT == 0)
+            {
+                pAnInfo->State = AN_STATE_AN_ENABLE;
+            }
+
+            break;
+
+        case AN_STATE_COMPLETE_ACK_INIT:
+            /* Make sure invalid bits are not set. */
+            if(pAnInfo->RxConfig.bits.D0 || pAnInfo->RxConfig.bits.D1 ||
+                pAnInfo->RxConfig.bits.D2 || pAnInfo->RxConfig.bits.D3 ||
+                pAnInfo->RxConfig.bits.D4 || pAnInfo->RxConfig.bits.D9 ||
+                pAnInfo->RxConfig.bits.D10 || pAnInfo->RxConfig.bits.D11)
+            {
+                AnRet = AUTONEG_STATUS_FAILED;
+                break;
+            }
+
+            /* Set up the link partner advertisement register. */
+            pAnInfo->mr_lp_adv_full_duplex = pAnInfo->RxConfig.D5_FD;
+            pAnInfo->mr_lp_adv_half_duplex = pAnInfo->RxConfig.D6_HD;
+            pAnInfo->mr_lp_adv_sym_pause = pAnInfo->RxConfig.D7_PS1;
+            pAnInfo->mr_lp_adv_asym_pause = pAnInfo->RxConfig.D8_PS2;
+            pAnInfo->mr_lp_adv_remote_fault1 = pAnInfo->RxConfig.D12_RF1;
+            pAnInfo->mr_lp_adv_remote_fault2 = pAnInfo->RxConfig.D13_RF2;
+            pAnInfo->mr_lp_adv_next_page = pAnInfo->RxConfig.D15_NP;
+
+            pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
+
+            pAnInfo->mr_toggle_tx = !pAnInfo->mr_toggle_tx;
+            pAnInfo->mr_toggle_rx = pAnInfo->RxConfig.bits.D11;
+            pAnInfo->mr_np_rx = pAnInfo->RxConfig.D15_NP;
+            pAnInfo->mr_page_rx = AN_TRUE;
+
+            pAnInfo->State = AN_STATE_COMPLETE_ACK;
+            AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+
+            break;
+
+        case AN_STATE_COMPLETE_ACK:
+            if(pAnInfo->AbilityMatch == AN_TRUE &&
+                pAnInfo->RxConfig.AsUSHORT == 0)
+            {
+                pAnInfo->State = AN_STATE_AN_ENABLE;
+                break;
+            }
+
+            Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
+
+            if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
+            {
+                if(pAnInfo->mr_adv_next_page == 0 ||
+                    pAnInfo->mr_lp_adv_next_page == 0)
+                {
+                    pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
+                }
+                else
+                {
+                    if(pAnInfo->TxConfig.bits.D15 == 0 &&
+                        pAnInfo->mr_np_rx == 0)
+                    {
+                        pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
+                    }
+                    else
+                    {
+                        AnRet = AUTONEG_STATUS_FAILED;
+                    }
+                }
+            }
+
+            break;
+
+        case AN_STATE_IDLE_DETECT_INIT:
+            pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
+
+            MM_AnTxIdle(pAnInfo);
+
+            pAnInfo->State = AN_STATE_IDLE_DETECT;
+
+            AnRet = AUTONEG_STATUS_TIMER_ENABLED;
+
+            break;
+
+        case AN_STATE_IDLE_DETECT:
+            if(pAnInfo->AbilityMatch == AN_TRUE &&
+                pAnInfo->RxConfig.AsUSHORT == 0)
+            {
+                pAnInfo->State = AN_STATE_AN_ENABLE;
+                break;
+            }
+
+            Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
+            if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
+            {
+#if 0
+/*                if(pAnInfo->IdleMatch == AN_TRUE) */
+/*                { */
+#endif
+                    pAnInfo->State = AN_STATE_LINK_OK;
+#if 0
+/*                } */
+/*                else */
+/*                { */
+/*                    AnRet = AUTONEG_STATUS_FAILED; */
+/*                    break; */
+/*                } */
+#endif
+            }
+
+            break;
+
+        case AN_STATE_LINK_OK:
+            pAnInfo->mr_an_complete = AN_TRUE;
+            pAnInfo->mr_link_ok = AN_TRUE;
+            AnRet = AUTONEG_STATUS_DONE;
+
+            break;
+
+        case AN_STATE_NEXT_PAGE_WAIT_INIT:
+            break;
+
+        case AN_STATE_NEXT_PAGE_WAIT:
+            break;
+
+        default:
+            AnRet = AUTONEG_STATUS_FAILED;
+            break;
+    }
+
+    return AnRet;
+}
+#endif /* INCLUDE_TBI_SUPPORT */
+
+#endif /* !defined(CONFIG_NET_MULTI) */
diff --git a/drivers/cs8900.h b/drivers/cs8900.h
new file mode 100644
index 00000000000..0a35ba6c76c
--- /dev/null
+++ b/drivers/cs8900.h
@@ -0,0 +1,256 @@
+/*
+ * Cirrus Logic CS8900A Ethernet
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 1999 Ben Williamson <benw@pobox.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is loaded into SRAM in bootstrap mode, where it waits
+ * for commands on UART1 to read and write memory, jump to code etc.
+ * A design goal for this program is to be entirely independent of the
+ * target board.  Anything with a CL-PS7111 or EP7211 should be able to run
+ * this code in bootstrap mode.  All the board specifics can be handled on
+ * the host.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/types.h>
+#include <config.h>
+
+#ifdef CONFIG_DRIVER_CS8900
+
+/* although the registers are 16 bit, they are 32-bit aligned on the
+   EDB7111. so we have to read them as 32-bit registers and ignore the
+   upper 16-bits. i'm not sure if this holds for the EDB7211. */
+
+#ifdef CS8900_BUS16
+  /* 16 bit aligned registers, 16 bit wide */
+  #define CS8900_REG u16
+  #define CS8900_OFF 0x02
+  #define CS8900_BUS16_0  *(volatile u8 *)(CS8900_BASE+0x00)
+  #define CS8900_BUS16_1  *(volatile u8 *)(CS8900_BASE+0x01)
+#elif  CS8900_BUS32
+  /* 32 bit aligned registers, 16 bit wide (we ignore upper 16 bits) */
+  #define CS8900_REG u32
+  #define CS8900_OFF 0x04
+#else
+  #error unknown bussize ...
+#endif
+
+#define CS8900_RTDATA *(volatile CS8900_REG *)(CS8900_BASE+0x00*CS8900_OFF)
+#define CS8900_TxCMD  *(volatile CS8900_REG *)(CS8900_BASE+0x02*CS8900_OFF)
+#define CS8900_TxLEN  *(volatile CS8900_REG *)(CS8900_BASE+0x03*CS8900_OFF)
+#define CS8900_ISQ    *(volatile CS8900_REG *)(CS8900_BASE+0x04*CS8900_OFF)
+#define CS8900_PPTR   *(volatile CS8900_REG *)(CS8900_BASE+0x05*CS8900_OFF)
+#define CS8900_PDATA  *(volatile CS8900_REG *)(CS8900_BASE+0x06*CS8900_OFF)
+
+
+#define ISQ_RxEvent     0x04
+#define ISQ_TxEvent     0x08
+#define ISQ_BufEvent    0x0C
+#define ISQ_RxMissEvent 0x10
+#define ISQ_TxColEvent  0x12
+#define ISQ_EventMask   0x3F
+
+/* packet page register offsets */
+
+/* bus interface registers */
+#define PP_ChipID    0x0000  /* Chip identifier - must be 0x630E */
+#define PP_ChipRev   0x0002  /* Chip revision, model codes */
+
+#define PP_IntReg    0x0022  /* Interrupt configuration */
+#define PP_IntReg_IRQ0         0x0000  /* Use INTR0 pin */
+#define PP_IntReg_IRQ1         0x0001  /* Use INTR1 pin */
+#define PP_IntReg_IRQ2         0x0002  /* Use INTR2 pin */
+#define PP_IntReg_IRQ3         0x0003  /* Use INTR3 pin */
+
+/* status and control registers */
+
+#define PP_RxCFG     0x0102  /* Receiver configuration */
+#define PP_RxCFG_Skip1         0x0040  /* Skip (i.e. discard) current frame */
+#define PP_RxCFG_Stream        0x0080  /* Enable streaming mode */
+#define PP_RxCFG_RxOK          0x0100  /* RxOK interrupt enable */
+#define PP_RxCFG_RxDMAonly     0x0200  /* Use RxDMA for all frames */
+#define PP_RxCFG_AutoRxDMA     0x0400  /* Select RxDMA automatically */
+#define PP_RxCFG_BufferCRC     0x0800  /* Include CRC characters in frame */
+#define PP_RxCFG_CRC           0x1000  /* Enable interrupt on CRC error */
+#define PP_RxCFG_RUNT          0x2000  /* Enable interrupt on RUNT frames */
+#define PP_RxCFG_EXTRA         0x4000  /* Enable interrupt on frames with extra data */
+
+#define PP_RxCTL     0x0104  /* Receiver control */
+#define PP_RxCTL_IAHash        0x0040  /* Accept frames that match hash */
+#define PP_RxCTL_Promiscuous   0x0080  /* Accept any frame */
+#define PP_RxCTL_RxOK          0x0100  /* Accept well formed frames */
+#define PP_RxCTL_Multicast     0x0200  /* Accept multicast frames */
+#define PP_RxCTL_IA            0x0400  /* Accept frame that matches IA */
+#define PP_RxCTL_Broadcast     0x0800  /* Accept broadcast frames */
+#define PP_RxCTL_CRC           0x1000  /* Accept frames with bad CRC */
+#define PP_RxCTL_RUNT          0x2000  /* Accept runt frames */
+#define PP_RxCTL_EXTRA         0x4000  /* Accept frames that are too long */
+
+#define PP_TxCFG     0x0106  /* Transmit configuration */
+#define PP_TxCFG_CRS           0x0040  /* Enable interrupt on loss of carrier */
+#define PP_TxCFG_SQE           0x0080  /* Enable interrupt on Signal Quality Error */
+#define PP_TxCFG_TxOK          0x0100  /* Enable interrupt on successful xmits */
+#define PP_TxCFG_Late          0x0200  /* Enable interrupt on "out of window" */
+#define PP_TxCFG_Jabber        0x0400  /* Enable interrupt on jabber detect */
+#define PP_TxCFG_Collision     0x0800  /* Enable interrupt if collision */
+#define PP_TxCFG_16Collisions  0x8000  /* Enable interrupt if > 16 collisions */
+
+#define PP_TxCmd     0x0108  /* Transmit command status */
+#define PP_TxCmd_TxStart_5     0x0000  /* Start after 5 bytes in buffer */
+#define PP_TxCmd_TxStart_381   0x0040  /* Start after 381 bytes in buffer */
+#define PP_TxCmd_TxStart_1021  0x0080  /* Start after 1021 bytes in buffer */
+#define PP_TxCmd_TxStart_Full  0x00C0  /* Start after all bytes loaded */
+#define PP_TxCmd_Force         0x0100  /* Discard any pending packets */
+#define PP_TxCmd_OneCollision  0x0200  /* Abort after a single collision */
+#define PP_TxCmd_NoCRC         0x1000  /* Do not add CRC */
+#define PP_TxCmd_NoPad         0x2000  /* Do not pad short packets */
+
+#define PP_BufCFG    0x010A  /* Buffer configuration */
+#define PP_BufCFG_SWI          0x0040  /* Force interrupt via software */
+#define PP_BufCFG_RxDMA        0x0080  /* Enable interrupt on Rx DMA */
+#define PP_BufCFG_TxRDY        0x0100  /* Enable interrupt when ready for Tx */
+#define PP_BufCFG_TxUE         0x0200  /* Enable interrupt in Tx underrun */
+#define PP_BufCFG_RxMiss       0x0400  /* Enable interrupt on missed Rx packets */
+#define PP_BufCFG_Rx128        0x0800  /* Enable Rx interrupt after 128 bytes */
+#define PP_BufCFG_TxCol        0x1000  /* Enable int on Tx collision ctr overflow */
+#define PP_BufCFG_Miss         0x2000  /* Enable int on Rx miss ctr overflow */
+#define PP_BufCFG_RxDest       0x8000  /* Enable int on Rx dest addr match */
+
+#define PP_LineCTL   0x0112  /* Line control */
+#define PP_LineCTL_Rx          0x0040  /* Enable receiver */
+#define PP_LineCTL_Tx          0x0080  /* Enable transmitter */
+#define PP_LineCTL_AUIonly     0x0100  /* AUI interface only */
+#define PP_LineCTL_AutoAUI10BT 0x0200  /* Autodetect AUI or 10BaseT interface */
+#define PP_LineCTL_ModBackoffE 0x0800  /* Enable modified backoff algorithm */
+#define PP_LineCTL_PolarityDis 0x1000  /* Disable Rx polarity autodetect */
+#define PP_LineCTL_2partDefDis 0x2000  /* Disable two-part defferal */
+#define PP_LineCTL_LoRxSquelch 0x4000  /* Reduce receiver squelch threshold */
+
+#define PP_SelfCTL   0x0114  /* Chip self control */
+#define PP_SelfCTL_Reset       0x0040  /* Self-clearing reset */
+#define PP_SelfCTL_SWSuspend   0x0100  /* Initiate suspend mode */
+#define PP_SelfCTL_HWSleepE    0x0200  /* Enable SLEEP input */
+#define PP_SelfCTL_HWStandbyE  0x0400  /* Enable standby mode */
+#define PP_SelfCTL_HC0E        0x1000  /* use HCB0 for LINK LED */
+#define PP_SelfCTL_HC1E        0x2000  /* use HCB1 for BSTATUS LED */
+#define PP_SelfCTL_HCB0        0x4000  /* control LINK LED if HC0E set */
+#define PP_SelfCTL_HCB1        0x8000  /* control BSTATUS LED if HC1E set */
+
+#define PP_BusCTL    0x0116  /* Bus control */
+#define PP_BusCTL_ResetRxDMA   0x0040  /* Reset RxDMA pointer */
+#define PP_BusCTL_DMAextend    0x0100  /* Extend DMA cycle */
+#define PP_BusCTL_UseSA        0x0200  /* Assert MEMCS16 on address decode */
+#define PP_BusCTL_MemoryE      0x0400  /* Enable memory mode */
+#define PP_BusCTL_DMAburst     0x0800  /* Limit DMA access burst */
+#define PP_BusCTL_IOCHRDYE     0x1000  /* Set IOCHRDY high impedence */
+#define PP_BusCTL_RxDMAsize    0x2000  /* Set DMA buffer size 64KB */
+#define PP_BusCTL_EnableIRQ    0x8000  /* Generate interrupt on interrupt event */
+
+#define PP_TestCTL   0x0118  /* Test control */
+#define PP_TestCTL_DisableLT   0x0080  /* Disable link status */
+#define PP_TestCTL_ENDECloop   0x0200  /* Internal loopback */
+#define PP_TestCTL_AUIloop     0x0400  /* AUI loopback */
+#define PP_TestCTL_DisBackoff  0x0800  /* Disable backoff algorithm */
+#define PP_TestCTL_FDX         0x4000  /* Enable full duplex mode */
+
+#define PP_ISQ       0x0120  /* Interrupt Status Queue */
+
+#define PP_RER       0x0124  /* Receive event */
+#define PP_RER_IAHash          0x0040  /* Frame hash match */
+#define PP_RER_Dribble         0x0080  /* Frame had 1-7 extra bits after last byte */
+#define PP_RER_RxOK            0x0100  /* Frame received with no errors */
+#define PP_RER_Hashed          0x0200  /* Frame address hashed OK */
+#define PP_RER_IA              0x0400  /* Frame address matched IA */
+#define PP_RER_Broadcast       0x0800  /* Broadcast frame */
+#define PP_RER_CRC             0x1000  /* Frame had CRC error */
+#define PP_RER_RUNT            0x2000  /* Runt frame */
+#define PP_RER_EXTRA           0x4000  /* Frame was too long */
+
+#define PP_TER       0x0128 /* Transmit event */
+#define PP_TER_CRS             0x0040  /* Carrier lost */
+#define PP_TER_SQE             0x0080  /* Signal Quality Error */
+#define PP_TER_TxOK            0x0100  /* Packet sent without error */
+#define PP_TER_Late            0x0200  /* Out of window */
+#define PP_TER_Jabber          0x0400  /* Stuck transmit? */
+#define PP_TER_NumCollisions   0x7800  /* Number of collisions */
+#define PP_TER_16Collisions    0x8000  /* > 16 collisions */
+
+#define PP_BER       0x012C /* Buffer event */
+#define PP_BER_SWint           0x0040 /* Software interrupt */
+#define PP_BER_RxDMAFrame      0x0080 /* Received framed DMAed */
+#define PP_BER_Rdy4Tx          0x0100 /* Ready for transmission */
+#define PP_BER_TxUnderrun      0x0200 /* Transmit underrun */
+#define PP_BER_RxMiss          0x0400 /* Received frame missed */
+#define PP_BER_Rx128           0x0800 /* 128 bytes received */
+#define PP_BER_RxDest          0x8000 /* Received framed passed address filter */
+
+#define PP_RxMiss    0x0130  /*  Receiver miss counter */
+
+#define PP_TxCol     0x0132  /*  Transmit collision counter */
+
+#define PP_LineSTAT  0x0134  /* Line status */
+#define PP_LineSTAT_LinkOK     0x0080  /* Line is connected and working */
+#define PP_LineSTAT_AUI        0x0100  /* Connected via AUI */
+#define PP_LineSTAT_10BT       0x0200  /* Connected via twisted pair */
+#define PP_LineSTAT_Polarity   0x1000  /* Line polarity OK (10BT only) */
+#define PP_LineSTAT_CRS        0x4000  /* Frame being received */
+
+#define PP_SelfSTAT  0x0136  /* Chip self status */
+#define PP_SelfSTAT_33VActive  0x0040  /* supply voltage is 3.3V */
+#define PP_SelfSTAT_InitD      0x0080  /* Chip initialization complete */
+#define PP_SelfSTAT_SIBSY      0x0100  /* EEPROM is busy */
+#define PP_SelfSTAT_EEPROM     0x0200  /* EEPROM present */
+#define PP_SelfSTAT_EEPROM_OK  0x0400  /* EEPROM checks out */
+#define PP_SelfSTAT_ELPresent  0x0800  /* External address latch logic available */
+#define PP_SelfSTAT_EEsize     0x1000  /* Size of EEPROM */
+
+#define PP_BusSTAT   0x0138  /* Bus status */
+#define PP_BusSTAT_TxBid       0x0080  /* Tx error */
+#define PP_BusSTAT_TxRDY       0x0100  /* Ready for Tx data */
+
+#define PP_TDR       0x013C  /* AUI Time Domain Reflectometer */
+
+/* initiate transmit registers */
+
+#define PP_TxCommand 0x0144  /* Tx Command */
+#define PP_TxLength  0x0146  /* Tx Length */
+
+
+/* address filter registers */
+
+#define PP_LAF       0x0150  /* Logical address filter (6 bytes) */
+#define PP_IA        0x0158  /* Individual address (MAC) */
+
+/* EEPROM Kram */
+#define SI_BUSY 0x0100
+#define PP_SelfST 0x0136	/*  Self State register */
+#define PP_EECMD 0x0040		/*  NVR Interface Command register */
+#define PP_EEData 0x0042	/*  NVR Interface Data Register */
+#define EEPROM_WRITE_EN		0x00F0
+#define EEPROM_WRITE_DIS	0x0000
+#define EEPROM_WRITE_CMD	0x0100
+#define EEPROM_READ_CMD		0x0200
+
+
+
+#endif /* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/natsemi.c b/drivers/natsemi.c
new file mode 100644
index 00000000000..5a8c5b4ecc1
--- /dev/null
+++ b/drivers/natsemi.c
@@ -0,0 +1,881 @@
+/*
+   natsemi.c: A U-Boot driver for the NatSemi DP8381x series.
+   Author: Mark A. Rakes (mark_rakes@vivato.net)
+
+   Adapted from an Etherboot driver written by:
+
+   Copyright (C) 2001 Entity Cyber, Inc.
+
+   This development of this Etherboot driver was funded by
+
+      Sicom Systems: http://www.sicompos.com/
+
+   Author: Marty Connor (mdc@thinguin.org)
+   Adapted from a Linux driver which was written by Donald Becker
+
+   This software may be used and distributed according to the terms
+   of the GNU Public License (GPL), incorporated herein by reference.
+
+   Original Copyright Notice:
+
+   Written/copyright 1999-2001 by Donald Becker.
+
+   This software may be used and distributed according to the terms of
+   the GNU General Public License (GPL), incorporated herein by reference.
+   Drivers based on or derived from this code fall under the GPL and must
+   retain the authorship, copyright and license notice.  This file is not
+   a complete program and may only be used when the entire operating
+   system is licensed under the GPL.  License for under other terms may be
+   available.  Contact the original author for details.
+
+   The original author may be reached as becker@scyld.com, or at
+   Scyld Computing Corporation
+   410 Severn Ave., Suite 210
+   Annapolis MD 21403
+
+   Support information and updates available at
+   http://www.scyld.com/network/netsemi.html
+
+   References:
+   http://www.scyld.com/expert/100mbps.html
+   http://www.scyld.com/expert/NWay.html
+   Datasheet is available from:
+   http://www.national.com/pf/DP/DP83815.html
+*/
+
+/* Revision History
+ * October 2002 mar	1.0
+ *   Initial U-Boot Release.  Tested with Netgear FA311 board
+ *   and dp83815 chipset on custom board
+*/
+
+/* Includes */
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+	defined(CONFIG_NATSEMI)
+
+/* defines */
+#define EEPROM_SIZE 0xb /*12 16-bit chunks, or 24 bytes*/
+
+#define DSIZE     0x00000FFF
+#define ETH_ALEN	6
+#define CRC_SIZE  4
+#define TOUT_LOOP   500000
+#define TX_BUF_SIZE    1536
+#define RX_BUF_SIZE    1536
+#define NUM_RX_DESC    4	/* Number of Rx descriptor registers. */
+
+/* Offsets to the device registers.
+   Unlike software-only systems, device drivers interact with complex hardware.
+   It's not useful to define symbolic names for every register bit in the
+   device.  */
+enum register_offsets {
+	ChipCmd 	= 0x00,
+	ChipConfig 	= 0x04,
+	EECtrl 		= 0x08,
+	IntrMask 	= 0x14,
+	IntrEnable 	= 0x18,
+	TxRingPtr 	= 0x20,
+	TxConfig 	= 0x24,
+	RxRingPtr 	= 0x30,
+	RxConfig 	= 0x34,
+	ClkRun 		= 0x3C,
+	RxFilterAddr 	= 0x48,
+	RxFilterData 	= 0x4C,
+	SiliconRev 	= 0x58,
+	PCIPM 		= 0x44,
+	BasicControl	= 0x80,
+	BasicStatus	= 0x84,
+	/* These are from the spec, around page 78... on a separate table. */
+	PGSEL 		= 0xCC,
+	PMDCSR 		= 0xE4,
+	TSTDAT 		= 0xFC,
+	DSPCFG 		= 0xF4,
+	SDCFG 		= 0x8C
+};
+
+/* Bit in ChipCmd. */
+enum ChipCmdBits {
+	ChipReset 	= 0x100,
+	RxReset 	= 0x20,
+	TxReset 	= 0x10,
+	RxOff 		= 0x08,
+	RxOn 		= 0x04,
+	TxOff 		= 0x02,
+	TxOn 		= 0x01
+};
+
+enum ChipConfigBits {
+	LinkSts 	= 0x80000000,
+	HundSpeed 	= 0x40000000,
+	FullDuplex 	= 0x20000000,
+	TenPolarity	= 0x10000000,
+	AnegDone	= 0x08000000,
+	AnegEnBothBoth	= 0x0000E000,
+	AnegDis100Full	= 0x0000C000,
+	AnegEn100Both	= 0x0000A000,
+	AnegDis100Half	= 0x00008000,
+	AnegEnBothHalf	= 0x00006000,
+	AnegDis10Full	= 0x00004000,
+	AnegEn10Both	= 0x00002000,
+	DuplexMask	= 0x00008000,
+	SpeedMask	= 0x00004000,
+	AnegMask	= 0x00002000,
+	AnegDis10Half	= 0x00000000,
+	ExtPhy 		= 0x00001000,
+	PhyRst 		= 0x00000400,
+	PhyDis 		= 0x00000200,
+	BootRomDisable	= 0x00000004,
+	BEMode 		= 0x00000001,
+};
+
+enum TxConfig_bits {
+	TxDrthMask 	= 0x3f,
+	TxFlthMask 	= 0x3f00,
+	TxMxdmaMask	= 0x700000,
+	TxMxdma_512 	= 0x0,
+	TxMxdma_4 	= 0x100000,
+	TxMxdma_8 	= 0x200000,
+	TxMxdma_16 	= 0x300000,
+	TxMxdma_32 	= 0x400000,
+	TxMxdma_64 	= 0x500000,
+	TxMxdma_128 	= 0x600000,
+	TxMxdma_256 	= 0x700000,
+	TxCollRetry 	= 0x800000,
+	TxAutoPad 	= 0x10000000,
+	TxMacLoop 	= 0x20000000,
+	TxHeartIgn 	= 0x40000000,
+	TxCarrierIgn 	= 0x80000000
+};
+
+enum RxConfig_bits {
+	RxDrthMask 	= 0x3e,
+	RxMxdmaMask 	= 0x700000,
+	RxMxdma_512 	= 0x0,
+	RxMxdma_4 	= 0x100000,
+	RxMxdma_8 	= 0x200000,
+	RxMxdma_16 	= 0x300000,
+	RxMxdma_32 	= 0x400000,
+	RxMxdma_64 	= 0x500000,
+	RxMxdma_128 	= 0x600000,
+	RxMxdma_256 	= 0x700000,
+	RxAcceptLong 	= 0x8000000,
+	RxAcceptTx 	= 0x10000000,
+	RxAcceptRunt 	= 0x40000000,
+	RxAcceptErr 	= 0x80000000
+};
+
+/* Bits in the RxMode register. */
+enum rx_mode_bits {
+	AcceptErr 		= 0x20,
+	AcceptRunt 		= 0x10,
+	AcceptBroadcast 	= 0xC0000000,
+	AcceptMulticast 	= 0x00200000,
+	AcceptAllMulticast 	= 0x20000000,
+	AcceptAllPhys 		= 0x10000000,
+	AcceptMyPhys 		= 0x08000000
+};
+
+typedef struct _BufferDesc {
+	u32 link;
+	vu_long cmdsts;
+	u32 bufptr;
+	u32 software_use;
+} BufferDesc;
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+	DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
+	DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
+	DescSizeMask = 0xfff,
+
+	DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
+	DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
+	DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
+	DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
+
+	DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
+	DescRxDest = 0x01800000, DescRxLong = 0x00400000,
+	DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
+	DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
+	DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
+};
+
+/* Globals */
+#ifdef NATSEMI_DEBUG
+static int natsemi_debug = 0;	/* 1 verbose debugging, 0 normal */
+#endif
+static u32 SavedClkRun;
+static unsigned int cur_rx;
+static unsigned int advertising;
+static unsigned int rx_config;
+static unsigned int tx_config;
+
+/* Note: transmit and receive buffers and descriptors must be
+   longword aligned */
+static BufferDesc txd __attribute__ ((aligned(4)));
+static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(4)));
+
+static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(4)));
+static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
+    __attribute__ ((aligned(4)));
+
+/* Function Prototypes */
+#if 0
+static void write_eeprom(struct eth_device *dev, long addr, int location,
+			 short value);
+#endif
+static int read_eeprom(struct eth_device *dev, long addr, int location);
+static int mdio_read(struct eth_device *dev, int phy_id, int location);
+static int natsemi_init(struct eth_device *dev, bd_t * bis);
+static void natsemi_reset(struct eth_device *dev);
+static void natsemi_init_rxfilter(struct eth_device *dev);
+static void natsemi_init_txd(struct eth_device *dev);
+static void natsemi_init_rxd(struct eth_device *dev);
+static void natsemi_set_rx_mode(struct eth_device *dev);
+static void natsemi_check_duplex(struct eth_device *dev);
+static int natsemi_send(struct eth_device *dev, volatile void *packet,
+			int length);
+static int natsemi_poll(struct eth_device *dev);
+static void natsemi_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+	{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815},
+	{}
+};
+
+#define bus_to_phys(a)	pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a)	pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+static inline int
+INW(struct eth_device *dev, u_long addr)
+{
+	return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
+}
+
+static int
+INL(struct eth_device *dev, u_long addr)
+{
+	return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
+}
+
+static inline void
+OUTW(struct eth_device *dev, int command, u_long addr)
+{
+	*(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
+}
+
+static inline void
+OUTL(struct eth_device *dev, int command, u_long addr)
+{
+	*(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
+}
+
+/*
+ * Function: natsemi_initialize
+ *
+ * Description: Retrieves the MAC address of the card, and sets up some
+ * globals required by other routines,  and initializes the NIC, making it
+ * ready to send and receive packets.
+ *
+ * Side effects:
+ *            leaves the natsemi initialized, and ready to recieve packets.
+ *
+ * Returns:   struct eth_device *:          pointer to NIC data structure
+ */
+
+int
+natsemi_initialize(bd_t * bis)
+{
+	pci_dev_t devno;
+	int card_number = 0;
+	struct eth_device *dev;
+	u32 iobase, status, chip_config;
+	int i, idx = 0;
+	int prev_eedata;
+	u32 tmp;
+
+	while (1) {
+		/* Find PCI device(s) */
+		if ((devno = pci_find_devices(supported, idx++)) < 0) {
+			break;
+		}
+
+		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+		iobase &= ~0x3;	/* 1: unused and 0:I/O Space Indicator */
+
+		pci_write_config_dword(devno, PCI_COMMAND,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+		/* Check if I/O accesses and Bus Mastering are enabled. */
+		pci_read_config_dword(devno, PCI_COMMAND, &status);
+		if (!(status & PCI_COMMAND_MEMORY)) {
+			printf("Error: Can not enable MEM access.\n");
+			continue;
+		} else if (!(status & PCI_COMMAND_MASTER)) {
+			printf("Error: Can not enable Bus Mastering.\n");
+			continue;
+		}
+
+		dev = (struct eth_device *) malloc(sizeof *dev);
+
+		sprintf(dev->name, "dp83815#%d", card_number);
+		dev->iobase = bus_to_phys(iobase);
+#ifdef NATSEMI_DEBUG
+		printf("natsemi: NatSemi ns8381[56] @ %#x\n", dev->iobase);
+#endif
+		dev->priv = (void *) devno;
+		dev->init = natsemi_init;
+		dev->halt = natsemi_disable;
+		dev->send = natsemi_send;
+		dev->recv = natsemi_poll;
+
+		eth_register(dev);
+
+		card_number++;
+
+		/* Set the latency timer for value. */
+		pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20);
+
+		udelay(10 * 1000);
+
+		/* natsemi has a non-standard PM control register
+		 * in PCI config space.  Some boards apparently need
+		 * to be brought to D0 in this manner.  */
+		pci_read_config_dword(devno, PCIPM, &tmp);
+		if (tmp & (0x03 | 0x100)) {
+			/* D0 state, disable PME assertion */
+			u32 newtmp = tmp & ~(0x03 | 0x100);
+			pci_write_config_dword(devno, PCIPM, newtmp);
+		}
+
+		printf("natsemi: EEPROM contents:\n");
+		for (i = 0; i <= EEPROM_SIZE; i++) {
+			short eedata = read_eeprom(dev, EECtrl, i);
+			printf(" %04hx", eedata);
+		}
+		printf("\n");
+
+		/* get MAC address */
+		prev_eedata = read_eeprom(dev, EECtrl, 6);
+		for (i = 0; i < 3; i++) {
+			int eedata = read_eeprom(dev, EECtrl, i + 7);
+			dev->enetaddr[i*2] = (eedata << 1) + (prev_eedata >> 15);
+			dev->enetaddr[i*2+1] = eedata >> 7;
+			prev_eedata = eedata;
+		}
+
+		/* Reset the chip to erase any previous misconfiguration. */
+		OUTL(dev, ChipReset, ChipCmd);
+
+		advertising = mdio_read(dev, 1, 4);
+		chip_config = INL(dev, ChipConfig);
+#ifdef NATSEMI_DEBUG
+		printf("%s: Transceiver status %#08X advertising %#08X\n",
+		       	dev->name, (int) INL(dev, BasicStatus), advertising);
+		printf("%s: Transceiver default autoneg. %s 10%s %s duplex.\n",
+			dev->name, chip_config & AnegMask ? "enabled, advertise" :
+			"disabled, force", chip_config & SpeedMask ? "0" : "",
+			chip_config & DuplexMask ? "full" : "half");
+#endif
+		chip_config |= AnegEnBothBoth;
+#ifdef NATSEMI_DEBUG
+		printf("%s: changed to autoneg. %s 10%s %s duplex.\n",
+			dev->name, chip_config & AnegMask ? "enabled, advertise" :
+			"disabled, force", chip_config & SpeedMask ? "0" : "",
+			chip_config & DuplexMask ? "full" : "half");
+#endif
+		/*write new autoneg bits, reset phy*/
+		OUTL(dev, (chip_config | PhyRst), ChipConfig);
+		/*un-reset phy*/
+		OUTL(dev, chip_config, ChipConfig);
+
+		/* Disable PME:
+		 * The PME bit is initialized from the EEPROM contents.
+		 * PCI cards probably have PME disabled, but motherboard
+		 * implementations may have PME set to enable WakeOnLan.
+		 * With PME set the chip will scan incoming packets but
+		 * nothing will be written to memory. */
+		SavedClkRun = INL(dev, ClkRun);
+		OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+	}
+	return card_number;
+}
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+   The EEPROM code is for common 93c06/46 EEPROMs w/ 6bit addresses.  */
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but future 66Mhz
+   access may need a delay. */
+#define eeprom_delay(ee_addr)	INL(dev, ee_addr)
+
+enum EEPROM_Ctrl_Bits {
+	EE_ShiftClk = 0x04,
+	EE_DataIn = 0x01,
+	EE_ChipSelect = 0x08,
+	EE_DataOut = 0x02
+};
+
+#define EE_Write0 (EE_ChipSelect)
+#define EE_Write1 (EE_ChipSelect | EE_DataIn)
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+	EE_WrEnCmd = (4 << 6), EE_WriteCmd = (5 << 6),
+	EE_ReadCmd = (6 << 6), EE_EraseCmd = (7 << 6),
+};
+
+#if 0
+static void
+write_eeprom(struct eth_device *dev, long addr, int location, short value)
+{
+	int i;
+	int ee_addr = (typeof(ee_addr))addr;
+	short wren_cmd = EE_WrEnCmd | 0x30; /*wren is 100 + 11XXXX*/
+	short write_cmd = location | EE_WriteCmd;
+
+#ifdef NATSEMI_DEBUG
+	printf("write_eeprom: %08x, %04hx, %04hx\n",
+		dev->iobase + ee_addr, write_cmd, value);
+#endif
+	/* Shift the write enable command bits out. */
+	for (i = 9; i >= 0; i--) {
+		short cmdval = (wren_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		OUTL(dev, cmdval, ee_addr);
+		eeprom_delay(ee_addr);
+		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	OUTL(dev, 0, ee_addr); /*bring chip select low*/
+	OUTL(dev, EE_ShiftClk, ee_addr);
+	eeprom_delay(ee_addr);
+
+	/* Shift the write command bits out. */
+	for (i = 9; i >= 0; i--) {
+		short cmdval = (write_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		OUTL(dev, cmdval, ee_addr);
+		eeprom_delay(ee_addr);
+		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	for (i = 0; i < 16; i++) {
+		short cmdval = (value & (1 << i)) ? EE_Write1 : EE_Write0;
+		OUTL(dev, cmdval, ee_addr);
+		eeprom_delay(ee_addr);
+		OUTL(dev, cmdval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	OUTL(dev, 0, ee_addr); /*bring chip select low*/
+	OUTL(dev, EE_ShiftClk, ee_addr);
+	for (i = 0; i < 200000; i++) {
+		OUTL(dev, EE_Write0, ee_addr); /*poll for done*/
+		if (INL(dev, ee_addr) & EE_DataOut) {
+		    break; /*finished*/
+		}
+	}
+	eeprom_delay(ee_addr);
+
+	/* Terminate the EEPROM access. */
+	OUTL(dev, EE_Write0, ee_addr);
+	OUTL(dev, 0, ee_addr);
+	return;
+}
+#endif
+
+static int
+read_eeprom(struct eth_device *dev, long addr, int location)
+{
+	int i;
+	int retval = 0;
+	int ee_addr = (typeof(ee_addr))addr;
+	int read_cmd = location | EE_ReadCmd;
+
+	OUTL(dev, EE_Write0, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		OUTL(dev, dataval, ee_addr);
+		eeprom_delay(ee_addr);
+		OUTL(dev, dataval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+	OUTL(dev, EE_ChipSelect, ee_addr);
+	eeprom_delay(ee_addr);
+
+	for (i = 0; i < 16; i++) {
+		OUTL(dev, EE_ChipSelect | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+		retval |= (INL(dev, ee_addr) & EE_DataOut) ? 1 << i : 0;
+		OUTL(dev, EE_ChipSelect, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	OUTL(dev, EE_Write0, ee_addr);
+	OUTL(dev, 0, ee_addr);
+#ifdef NATSEMI_DEBUG
+	if (natsemi_debug)
+		printf("read_eeprom: %08x, %08x, retval %08x\n",
+			dev->iobase + ee_addr, read_cmd, retval);
+#endif
+	return retval;
+}
+
+/*  MII transceiver control section.
+	The 83815 series has an internal transceiver, and we present the
+	management registers as if they were MII connected. */
+
+static int
+mdio_read(struct eth_device *dev, int phy_id, int location)
+{
+	if (phy_id == 1 && location < 32)
+		return INL(dev, BasicControl+(location<<2))&0xffff;
+	else
+		return 0xffff;
+}
+
+/* Function: natsemi_init
+ *
+ * Description: resets the ethernet controller chip and configures
+ *    registers and data structures required for sending and receiving packets.
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * returns:  	int.
+ */
+
+static int
+natsemi_init(struct eth_device *dev, bd_t * bis)
+{
+
+	natsemi_reset(dev);
+
+	/* Disable PME:
+	 * The PME bit is initialized from the EEPROM contents.
+	 * PCI cards probably have PME disabled, but motherboard
+	 * implementations may have PME set to enable WakeOnLan.
+	 * With PME set the chip will scan incoming packets but
+	 * nothing will be written to memory. */
+	OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+	natsemi_init_rxfilter(dev);
+	natsemi_init_txd(dev);
+	natsemi_init_rxd(dev);
+
+	/* Configure the PCI bus bursts and FIFO thresholds. */
+	tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 | (0x1002);
+	rx_config = RxMxdma_256 | 0x20;
+
+#ifdef NATSEMI_DEBUG
+	printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
+	printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+	OUTL(dev, tx_config, TxConfig);
+	OUTL(dev, rx_config, RxConfig);
+
+	natsemi_check_duplex(dev);
+	natsemi_set_rx_mode(dev);
+
+	OUTL(dev, (RxOn | TxOn), ChipCmd);
+	return 1;
+}
+
+/*
+ * Function: natsemi_reset
+ *
+ * Description: soft resets the controller chip
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * Returns:   void.
+ */
+static void
+natsemi_reset(struct eth_device *dev)
+{
+	OUTL(dev, ChipReset, ChipCmd);
+
+	/* On page 78 of the spec, they recommend some settings for "optimum
+	   performance" to be done in sequence.  These settings optimize some
+	   of the 100Mbit autodetection circuitry.  Also, we only want to do
+	   this for rev C of the chip.  */
+	if (INL(dev, SiliconRev) == 0x302) {
+		OUTW(dev, 0x0001, PGSEL);
+		OUTW(dev, 0x189C, PMDCSR);
+		OUTW(dev, 0x0000, TSTDAT);
+		OUTW(dev, 0x5040, DSPCFG);
+		OUTW(dev, 0x008C, SDCFG);
+	}
+	/* Disable interrupts using the mask. */
+	OUTL(dev, 0, IntrMask);
+	OUTL(dev, 0, IntrEnable);
+}
+
+/* Function: natsemi_init_rxfilter
+ *
+ * Description: sets receive filter address to our MAC address
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * returns:   void.
+ */
+
+static void
+natsemi_init_rxfilter(struct eth_device *dev)
+{
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i += 2) {
+		OUTL(dev, i, RxFilterAddr);
+		OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
+		     RxFilterData);
+	}
+}
+
+/*
+ * Function: natsemi_init_txd
+ *
+ * Description: initializes the Tx descriptor
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * returns:   void.
+ */
+
+static void
+natsemi_init_txd(struct eth_device *dev)
+{
+	txd.link = (u32) 0;
+	txd.cmdsts = (u32) 0;
+	txd.bufptr = (u32) & txb[0];
+
+	/* load Transmit Descriptor Register */
+	OUTL(dev, (u32) & txd, TxRingPtr);
+#ifdef NATSEMI_DEBUG
+	printf("natsemi_init_txd: TX descriptor reg loaded with: %#08X\n",
+	       INL(dev, TxRingPtr));
+#endif
+}
+
+/* Function: natsemi_init_rxd
+ *
+ * Description: initializes the Rx descriptor ring
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * Returns:   void.
+ */
+
+static void
+natsemi_init_rxd(struct eth_device *dev)
+{
+	int i;
+
+	cur_rx = 0;
+
+	/* init RX descriptor */
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		rxd[i].link =
+		    cpu_to_le32((i + 1 <
+				 NUM_RX_DESC) ? (u32) & rxd[i +
+							    1] : (u32) &
+				rxd[0]);
+		rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
+		rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
+#ifdef NATSEMI_DEBUG
+		printf
+		    ("natsemi_init_rxd: rxd[%d]=%p link=%X cmdsts=%lX bufptr=%X\n",
+		     	i, &rxd[i], le32_to_cpu(rxd[i].link),
+		     		rxd[i].cmdsts, rxd[i].bufptr);
+#endif
+	}
+
+	/* load Receive Descriptor Register */
+	OUTL(dev, (u32) & rxd[0], RxRingPtr);
+
+#ifdef NATSEMI_DEBUG
+	printf("natsemi_init_rxd: RX descriptor register loaded with: %X\n",
+	       INL(dev, RxRingPtr));
+#endif
+}
+
+/* Function: natsemi_set_rx_mode
+ *
+ * Description:
+ *    sets the receive mode to accept all broadcast packets and packets
+ *    with our MAC address, and reject all multicast packets.
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * Returns:   void.
+ */
+
+static void
+natsemi_set_rx_mode(struct eth_device *dev)
+{
+	u32 rx_mode = AcceptBroadcast | AcceptMyPhys;
+
+	OUTL(dev, rx_mode, RxFilterAddr);
+}
+
+static void
+natsemi_check_duplex(struct eth_device *dev)
+{
+	int duplex = INL(dev, ChipConfig) & FullDuplex ? 1 : 0;
+
+#ifdef NATSEMI_DEBUG
+	printf("%s: Setting %s-duplex based on negotiated link"
+	       " capability.\n", dev->name, duplex ? "full" : "half");
+#endif
+	if (duplex) {
+		rx_config |= RxAcceptTx;
+		tx_config |= (TxCarrierIgn | TxHeartIgn);
+	} else {
+		rx_config &= ~RxAcceptTx;
+		tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+	}
+	OUTL(dev, tx_config, TxConfig);
+	OUTL(dev, rx_config, RxConfig);
+}
+
+/* Function: natsemi_send
+ *
+ * Description: transmits a packet and waits for completion or timeout.
+ *
+ * Returns:   void.  */
+static int
+natsemi_send(struct eth_device *dev, volatile void *packet, int length)
+{
+	u32 i, status = 0;
+	u32 tx_status = 0;
+
+	/* Stop the transmitter */
+	OUTL(dev, TxOff, ChipCmd);
+
+#ifdef NATSEMI_DEBUG
+	if (natsemi_debug)
+		printf("natsemi_send: sending %d bytes\n", (int) length);
+#endif
+
+	/* set the transmit buffer descriptor and enable Transmit State Machine */
+	txd.link = cpu_to_le32(0);
+	txd.bufptr = cpu_to_le32(phys_to_bus((u32) packet));
+	txd.cmdsts = cpu_to_le32(DescOwn | length);
+
+	/* load Transmit Descriptor Register */
+	OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
+#ifdef NATSEMI_DEBUG
+	if (natsemi_debug)
+	    printf("natsemi_send: TX descriptor register loaded with: %#08X\n",
+	     INL(dev, TxRingPtr));
+#endif
+	/* restart the transmitter */
+	OUTL(dev, TxOn, ChipCmd);
+
+	for (i = 0;
+	     ((vu_long)tx_status = le32_to_cpu(txd.cmdsts)) & DescOwn;
+	     i++) {
+		if (i >= TOUT_LOOP) {
+			printf
+			    ("%s: tx error buffer not ready: txd.cmdsts == %#X\n",
+			     dev->name, tx_status);
+			goto Done;
+		}
+	}
+
+	if (!(tx_status & DescPktOK)) {
+		printf("natsemi_send: Transmit error, Tx status %X.\n",
+		       tx_status);
+		goto Done;
+	}
+
+	status = 1;
+      Done:
+	return status;
+}
+
+/* Function: natsemi_poll
+ *
+ * Description: checks for a received packet and returns it if found.
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * Returns:   1 if    packet was received.
+ *            0 if no packet was received.
+ *
+ * Side effects:
+ *            Returns (copies) the packet to the array dev->packet.
+ *            Returns the length of the packet.
+ */
+
+static int
+natsemi_poll(struct eth_device *dev)
+{
+	int retstat = 0;
+	int length = 0;
+	u32 rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
+
+	if (!(rx_status & (u32) DescOwn))
+		return retstat;
+#ifdef NATSEMI_DEBUG
+	if (natsemi_debug)
+		printf("natsemi_poll: got a packet: cur_rx:%d, status:%X\n",
+		       cur_rx, rx_status);
+#endif
+	length = (rx_status & DSIZE) - CRC_SIZE;
+
+	if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
+		printf
+		    ("natsemi_poll: Corrupted packet received, buffer status = %X\n",
+		     rx_status);
+		retstat = 0;
+	} else {		/* give packet to higher level routine */
+		NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
+		retstat = 1;
+	}
+
+	/* return the descriptor and buffer to receive ring */
+	rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
+	rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
+
+	if (++cur_rx == NUM_RX_DESC)
+		cur_rx = 0;
+
+	/* re-enable the potentially idle receive state machine */
+	OUTL(dev, RxOn, ChipCmd);
+
+	return retstat;
+}
+
+/* Function: natsemi_disable
+ *
+ * Description: Turns off interrupts and stops Tx and Rx engines
+ *
+ * Arguments: struct eth_device *dev:          NIC data structure
+ *
+ * Returns:   void.
+ */
+
+static void
+natsemi_disable(struct eth_device *dev)
+{
+	/* Disable interrupts using the mask. */
+	OUTL(dev, 0, IntrMask);
+	OUTL(dev, 0, IntrEnable);
+
+	/* Stop the chip's Tx and Rx processes. */
+	OUTL(dev, RxOff | TxOff, ChipCmd);
+
+	/* Restore PME enable bit */
+	OUTL(dev, SavedClkRun, ClkRun);
+}
+
+#endif
diff --git a/drivers/nicext.h b/drivers/nicext.h
new file mode 100644
index 00000000000..0879dc22712
--- /dev/null
+++ b/drivers/nicext.h
@@ -0,0 +1,110 @@
+/****************************************************************************
+ * Copyright(c) 2000-2001 Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Name:        nicext.h
+ *
+ * Description: Broadcom Network Interface Card Extension (NICE) is an
+ *              extension to Linux NET device kernel mode drivers.
+ *              NICE is designed to provide additional functionalities,
+ *              such as receive packet intercept. To support Broadcom NICE,
+ *              the network device driver can be modified by adding an
+ *              device ioctl handler and by indicating receiving packets
+ *              to the NICE receive handler. Broadcom NICE will only be
+ *              enabled by a NICE-aware intermediate driver, such as
+ *              Broadcom Advanced Server Program Driver (BASP). When NICE
+ *              is not enabled, the modified network device drivers
+ *              functions exactly as other non-NICE aware drivers.
+ *
+ * Author:      Frankie Fan
+ *
+ * Created:     September 17, 2000
+ *
+ ****************************************************************************/
+#ifndef _nicext_h_
+#define _nicext_h_
+
+/*
+ * ioctl for NICE
+ */
+#define SIOCNICE                   	SIOCDEVPRIVATE+7
+
+/*
+ * SIOCNICE:
+ *
+ * The following structure needs to be less than IFNAMSIZ (16 bytes) because
+ * we're overloading ifreq.ifr_ifru.
+ *
+ * If 16 bytes is not enough, we should consider relaxing this because
+ * this is no field after ifr_ifru in the ifreq structure. But we may
+ * run into future compatiability problem in case of changing struct ifreq.
+ */
+struct nice_req
+{
+    __u32 cmd;
+
+    union
+    {
+#ifdef __KERNEL__
+        /* cmd = NICE_CMD_SET_RX or NICE_CMD_GET_RX */
+        struct
+        {
+            void (*nrqus1_rx)( struct sk_buff*, void* );
+            void* nrqus1_ctx;
+        } nrqu_nrqus1;
+
+        /* cmd = NICE_CMD_QUERY_SUPPORT */
+        struct
+        {
+            __u32 nrqus2_magic;
+            __u32 nrqus2_support_rx:1;
+            __u32 nrqus2_support_vlan:1;
+            __u32 nrqus2_support_get_speed:1;
+        } nrqu_nrqus2;
+#endif
+
+        /* cmd = NICE_CMD_GET_SPEED */
+        struct
+        {
+            unsigned int nrqus3_speed; /* 0 if link is down, */
+                                       /* otherwise speed in Mbps */
+        } nrqu_nrqus3;
+
+        /* cmd = NICE_CMD_BLINK_LED */
+        struct
+        {
+            unsigned int nrqus4_blink_time; /* blink duration in seconds */
+        } nrqu_nrqus4;
+
+    } nrq_nrqu;
+};
+
+#define nrq_rx           nrq_nrqu.nrqu_nrqus1.nrqus1_rx
+#define nrq_ctx          nrq_nrqu.nrqu_nrqus1.nrqus1_ctx
+#define nrq_support_rx   nrq_nrqu.nrqu_nrqus2.nrqus2_support_rx
+#define nrq_magic        nrq_nrqu.nrqu_nrqus2.nrqus2_magic
+#define nrq_support_vlan nrq_nrqu.nrqu_nrqus2.nrqus2_support_vlan
+#define nrq_support_get_speed nrq_nrqu.nrqu_nrqus2.nrqus2_support_get_speed
+#define nrq_speed        nrq_nrqu.nrqu_nrqus3.nrqus3_speed
+#define nrq_blink_time   nrq_nrqu.nrqu_nrqus4.nrqus4_blink_time
+
+/*
+ * magic constants
+ */
+#define NICE_REQUESTOR_MAGIC            0x4543494E /* NICE in ascii */
+#define NICE_DEVICE_MAGIC               0x4E494345 /* ECIN in ascii */
+
+/*
+ * command field
+ */
+#define NICE_CMD_QUERY_SUPPORT          0x00000001
+#define NICE_CMD_SET_RX                 0x00000002
+#define NICE_CMD_GET_RX                 0x00000003
+#define NICE_CMD_GET_SPEED              0x00000004
+#define NICE_CMD_BLINK_LED              0x00000005
+
+#endif  /* _nicext_h_ */
+
diff --git a/drivers/ns8382x.c b/drivers/ns8382x.c
new file mode 100644
index 00000000000..978080eb20c
--- /dev/null
+++ b/drivers/ns8382x.c
@@ -0,0 +1,863 @@
+/*
+   ns8382x.c: A U-Boot driver for the NatSemi DP8382[01].
+   ported by: Mark A. Rakes (mark_rakes@vivato.net)
+
+   Adapted from:
+   1. an Etherboot driver for DP8381[56] written by:
+	   Copyright (C) 2001 Entity Cyber, Inc.
+
+	   This development of this Etherboot driver was funded by
+		  Sicom Systems: http://www.sicompos.com/
+
+	   Author: Marty Connor (mdc@thinguin.org)
+	   Adapted from a Linux driver which was written by Donald Becker
+
+	   This software may be used and distributed according to the terms
+	   of the GNU Public License (GPL), incorporated herein by reference.
+
+   2. A Linux driver by Donald Becker, ns820.c:
+		Written/copyright 1999-2002 by Donald Becker.
+
+		This software may be used and distributed according to the terms of
+		the GNU General Public License (GPL), incorporated herein by reference.
+		Drivers based on or derived from this code fall under the GPL and must
+		retain the authorship, copyright and license notice.  This file is not
+		a complete program and may only be used when the entire operating
+		system is licensed under the GPL.  License for under other terms may be
+		available.  Contact the original author for details.
+
+		The original author may be reached as becker@scyld.com, or at
+		Scyld Computing Corporation
+		410 Severn Ave., Suite 210
+		Annapolis MD 21403
+
+		Support information and updates available at
+		http://www.scyld.com/network/netsemi.html
+
+   Datasheets available from:
+   http://www.national.com/pf/DP/DP83820.html
+   http://www.national.com/pf/DP/DP83821.html
+*/
+
+/* Revision History
+ * October 2002 mar	1.0
+ *   Initial U-Boot Release.
+ *   	Tested with Netgear GA622T (83820)
+ *   	and SMC9452TX (83821)
+ *   	NOTE: custom boards with these chips may (likely) require
+ *   	a programmed EEPROM device (if present) in order to work
+ *   	correctly.
+*/
+
+/* Includes */
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+	defined(CONFIG_NS8382X)
+
+/* defines */
+#define DSIZE     0x00000FFF
+#define ETH_ALEN		6
+#define CRC_SIZE  4
+#define TOUT_LOOP   500000
+#define TX_BUF_SIZE    1536
+#define RX_BUF_SIZE    1536
+#define NUM_RX_DESC    4	/* Number of Rx descriptor registers. */
+
+enum register_offsets {
+	ChipCmd = 0x00,
+	ChipConfig = 0x04,
+	EECtrl = 0x08,
+	IntrMask = 0x14,
+	IntrEnable = 0x18,
+	TxRingPtr = 0x20,
+	TxRingPtrHi = 0x24,
+	TxConfig = 0x28,
+	RxRingPtr = 0x30,
+	RxRingPtrHi = 0x34,
+	RxConfig = 0x38,
+	PriQueue = 0x3C,
+	RxFilterAddr = 0x48,
+	RxFilterData = 0x4C,
+	ClkRun = 0xCC,
+	PCIPM = 0x44,
+};
+
+enum ChipCmdBits {
+	ChipReset = 0x100,
+	RxReset = 0x20,
+	TxReset = 0x10,
+	RxOff = 0x08,
+	RxOn = 0x04,
+	TxOff = 0x02,
+	TxOn = 0x01
+};
+
+enum ChipConfigBits {
+	LinkSts = 0x80000000,
+	GigSpeed = 0x40000000,
+	HundSpeed = 0x20000000,
+	FullDuplex = 0x10000000,
+	TBIEn = 0x01000000,
+	Mode1000 = 0x00400000,
+	T64En = 0x00004000,
+	D64En = 0x00001000,
+	M64En = 0x00000800,
+	PhyRst = 0x00000400,
+	PhyDis = 0x00000200,
+	ExtStEn = 0x00000100,
+	BEMode = 0x00000001,
+};
+#define SpeedStatus_Polarity ( GigSpeed | HundSpeed | FullDuplex)
+
+enum TxConfig_bits {
+	TxDrthMask 	= 0x000000ff,
+	TxFlthMask 	= 0x0000ff00,
+	TxMxdmaMask	= 0x00700000,
+	TxMxdma_8 	= 0x00100000,
+	TxMxdma_16 	= 0x00200000,
+	TxMxdma_32 	= 0x00300000,
+	TxMxdma_64 	= 0x00400000,
+	TxMxdma_128 	= 0x00500000,
+	TxMxdma_256 	= 0x00600000,
+	TxMxdma_512 	= 0x00700000,
+	TxMxdma_1024 	= 0x00000000,
+	TxCollRetry 	= 0x00800000,
+	TxAutoPad 	= 0x10000000,
+	TxMacLoop 	= 0x20000000,
+	TxHeartIgn 	= 0x40000000,
+	TxCarrierIgn 	= 0x80000000
+};
+
+enum RxConfig_bits {
+	RxDrthMask 	= 0x0000003e,
+	RxMxdmaMask 	= 0x00700000,
+	RxMxdma_8 	= 0x00100000,
+	RxMxdma_16 	= 0x00200000,
+	RxMxdma_32 	= 0x00300000,
+	RxMxdma_64 	= 0x00400000,
+	RxMxdma_128 	= 0x00500000,
+	RxMxdma_256 	= 0x00600000,
+	RxMxdma_512 	= 0x00700000,
+	RxMxdma_1024 	= 0x00000000,
+	RxAcceptLenErr 	= 0x04000000,
+	RxAcceptLong 	= 0x08000000,
+	RxAcceptTx 	= 0x10000000,
+	RxStripCRC 	= 0x20000000,
+	RxAcceptRunt 	= 0x40000000,
+	RxAcceptErr 	= 0x80000000,
+};
+
+/* Bits in the RxMode register. */
+enum rx_mode_bits {
+	RxFilterEnable 		= 0x80000000,
+	AcceptAllBroadcast 	= 0x40000000,
+	AcceptAllMulticast 	= 0x20000000,
+	AcceptAllUnicast 	= 0x10000000,
+	AcceptPerfectMatch 	= 0x08000000,
+};
+
+typedef struct _BufferDesc {
+	u32 link;
+	u32 bufptr;
+	vu_long cmdsts;
+	u32 extsts;		/*not used here */
+} BufferDesc;
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+	DescOwn = 0x80000000, DescMore = 0x40000000, DescIntr = 0x20000000,
+	DescNoCRC = 0x10000000, DescPktOK = 0x08000000,
+	DescSizeMask = 0xfff,
+
+	DescTxAbort = 0x04000000, DescTxFIFO = 0x02000000,
+	DescTxCarrier = 0x01000000, DescTxDefer = 0x00800000,
+	DescTxExcDefer = 0x00400000, DescTxOOWCol = 0x00200000,
+	DescTxExcColl = 0x00100000, DescTxCollCount = 0x000f0000,
+
+	DescRxAbort = 0x04000000, DescRxOver = 0x02000000,
+	DescRxDest = 0x01800000, DescRxLong = 0x00400000,
+	DescRxRunt = 0x00200000, DescRxInvalid = 0x00100000,
+	DescRxCRC = 0x00080000, DescRxAlign = 0x00040000,
+	DescRxLoop = 0x00020000, DesRxColl = 0x00010000,
+};
+
+/* Bits in MEAR */
+enum mii_reg_bits {
+	MDIO_ShiftClk = 0x0040,
+	MDIO_EnbOutput = 0x0020,
+	MDIO_Data = 0x0010,
+};
+
+/* PHY Register offsets.  */
+enum phy_reg_offsets {
+	BMCR = 0x00,
+	BMSR = 0x01,
+	PHYIDR1 = 0x02,
+	PHYIDR2 = 0x03,
+	ANAR = 0x04,
+	KTCR = 0x09,
+};
+
+/* basic mode control register bits */
+enum bmcr_bits {
+	Bmcr_Reset = 0x8000,
+	Bmcr_Loop = 0x4000,
+	Bmcr_Speed0 = 0x2000,
+	Bmcr_AutoNegEn = 0x1000,	/*if set ignores Duplex, Speed[01] */
+	Bmcr_RstAutoNeg = 0x0200,
+	Bmcr_Duplex = 0x0100,
+	Bmcr_Speed1 = 0x0040,
+	Bmcr_Force10H = 0x0000,
+	Bmcr_Force10F = 0x0100,
+	Bmcr_Force100H = 0x2000,
+	Bmcr_Force100F = 0x2100,
+	Bmcr_Force1000H = 0x0040,
+	Bmcr_Force1000F = 0x0140,
+};
+
+/* auto negotiation advertisement register */
+enum anar_bits {
+	anar_adv_100F = 0x0100,
+	anar_adv_100H = 0x0080,
+	anar_adv_10F = 0x0040,
+	anar_adv_10H = 0x0020,
+	anar_ieee_8023 = 0x0001,
+};
+
+/* 1K-base T control register */
+enum ktcr_bits {
+	ktcr_adv_1000H = 0x0100,
+	ktcr_adv_1000F = 0x0200,
+};
+
+/* Globals */
+static u32 SavedClkRun;
+static unsigned int cur_rx;
+static unsigned int rx_config;
+static unsigned int tx_config;
+
+/* Note: transmit and receive buffers and descriptors must be
+   long long word aligned */
+static BufferDesc txd __attribute__ ((aligned(8)));
+static BufferDesc rxd[NUM_RX_DESC] __attribute__ ((aligned(8)));
+static unsigned char txb[TX_BUF_SIZE] __attribute__ ((aligned(8)));
+static unsigned char rxb[NUM_RX_DESC * RX_BUF_SIZE]
+    __attribute__ ((aligned(8)));
+
+/* Function Prototypes */
+static int mdio_read(struct eth_device *dev, int phy_id, int addr);
+static void mdio_write(struct eth_device *dev, int phy_id, int addr, int value);
+static void mdio_sync(struct eth_device *dev, u32 offset);
+static int ns8382x_init(struct eth_device *dev, bd_t * bis);
+static void ns8382x_reset(struct eth_device *dev);
+static void ns8382x_init_rxfilter(struct eth_device *dev);
+static void ns8382x_init_txd(struct eth_device *dev);
+static void ns8382x_init_rxd(struct eth_device *dev);
+static void ns8382x_set_rx_mode(struct eth_device *dev);
+static void ns8382x_check_duplex(struct eth_device *dev);
+static int ns8382x_send(struct eth_device *dev, volatile void *packet,
+			int length);
+static int ns8382x_poll(struct eth_device *dev);
+static void ns8382x_disable(struct eth_device *dev);
+
+static struct pci_device_id supported[] = {
+	{PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_8382x},
+	{}
+};
+
+#define bus_to_phys(a)	pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a)	pci_phys_to_mem((pci_dev_t)dev->priv, a)
+
+static inline int
+INW(struct eth_device *dev, u_long addr)
+{
+	return le16_to_cpu(*(vu_short *) (addr + dev->iobase));
+}
+
+static int
+INL(struct eth_device *dev, u_long addr)
+{
+	return le32_to_cpu(*(vu_long *) (addr + dev->iobase));
+}
+
+static inline void
+OUTW(struct eth_device *dev, int command, u_long addr)
+{
+	*(vu_short *) ((addr + dev->iobase)) = cpu_to_le16(command);
+}
+
+static inline void
+OUTL(struct eth_device *dev, int command, u_long addr)
+{
+	*(vu_long *) ((addr + dev->iobase)) = cpu_to_le32(command);
+}
+
+/* Function: ns8382x_initialize
+ * Description: Retrieves the MAC address of the card, and sets up some
+ *  globals required by other routines, and initializes the NIC, making it
+ *  ready to send and receive packets.
+ * Side effects: initializes ns8382xs, ready to recieve packets.
+ * Returns:   int:          number of cards found
+ */
+
+int
+ns8382x_initialize(bd_t * bis)
+{
+	pci_dev_t devno;
+	int card_number = 0;
+	struct eth_device *dev;
+	u32 iobase, status;
+	int i, idx = 0;
+	u32 phyAddress;
+	u32 tmp;
+	u32 chip_config;
+
+	while (1) {		/* Find PCI device(s) */
+		if ((devno = pci_find_devices(supported, idx++)) < 0)
+			break;
+
+		pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase);
+		iobase &= ~0x3;	/* 1: unused and 0:I/O Space Indicator */
+
+#ifdef NS8382X_DEBUG
+		printf("ns8382x: NatSemi dp8382x @ 0x%x\n", iobase);
+#endif
+
+		pci_write_config_dword(devno, PCI_COMMAND,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+		/* Check if I/O accesses and Bus Mastering are enabled. */
+		pci_read_config_dword(devno, PCI_COMMAND, &status);
+		if (!(status & PCI_COMMAND_MEMORY)) {
+			printf("Error: Can not enable MEM access.\n");
+			continue;
+		} else if (!(status & PCI_COMMAND_MASTER)) {
+			printf("Error: Can not enable Bus Mastering.\n");
+			continue;
+		}
+
+		dev = (struct eth_device *) malloc(sizeof *dev);
+
+		sprintf(dev->name, "dp8382x#%d", card_number);
+		dev->iobase = bus_to_phys(iobase);
+		dev->priv = (void *) devno;
+		dev->init = ns8382x_init;
+		dev->halt = ns8382x_disable;
+		dev->send = ns8382x_send;
+		dev->recv = ns8382x_poll;
+
+		/* ns8382x has a non-standard PM control register
+		 * in PCI config space.  Some boards apparently need
+		 * to be brought to D0 in this manner.  */
+		pci_read_config_dword(devno, PCIPM, &tmp);
+		if (tmp & (0x03 | 0x100)) {	/* D0 state, disable PME assertion */
+			u32 newtmp = tmp & ~(0x03 | 0x100);
+			pci_write_config_dword(devno, PCIPM, newtmp);
+		}
+
+		/* get MAC address */
+		for (i = 0; i < 3; i++) {
+			u32 data;
+			char *mac = &dev->enetaddr[i * 2];
+
+			OUTL(dev, i * 2, RxFilterAddr);
+			data = INL(dev, RxFilterData);
+			*mac++ = data;
+			*mac++ = data >> 8;
+		}
+		/* get PHY address, can't be zero */
+		for (phyAddress = 1; phyAddress < 32; phyAddress++) {
+			u32 rev, phy1;
+
+			phy1 = mdio_read(dev, phyAddress, PHYIDR1);
+			if (phy1 == 0x2000) {	/*check for 83861/91 */
+				rev = mdio_read(dev, phyAddress, PHYIDR2);
+				if ((rev & ~(0x000f)) == 0x00005c50 ||
+				    (rev & ~(0x000f)) == 0x00005c60) {
+#ifdef NS8382X_DEBUG
+					printf("phy rev is %x\n", rev);
+					printf("phy address is %x\n",
+					       phyAddress);
+#endif
+					break;
+				}
+			}
+		}
+
+		/* set phy to autonegotiate && advertise everything */
+		mdio_write(dev, phyAddress, KTCR,
+			   (ktcr_adv_1000H | ktcr_adv_1000F));
+		mdio_write(dev, phyAddress, ANAR,
+			   (anar_adv_100F | anar_adv_100H | anar_adv_10H |
+			    anar_adv_10F | anar_ieee_8023));
+		mdio_write(dev, phyAddress, BMCR, 0x0);	/*restore */
+		mdio_write(dev, phyAddress, BMCR,
+			   (Bmcr_AutoNegEn | Bmcr_RstAutoNeg));
+		/* Reset the chip to erase any previous misconfiguration. */
+		OUTL(dev, (ChipReset), ChipCmd);
+
+		chip_config = INL(dev, ChipConfig);
+		/* reset the phy */
+		OUTL(dev, (chip_config | PhyRst), ChipConfig);
+		/* power up and initialize transceiver */
+		OUTL(dev, (chip_config & ~(PhyDis)), ChipConfig);
+
+		mdio_sync(dev, EECtrl);
+#ifdef NS8382X_DEBUG
+		{
+			u32 chpcfg =
+			    INL(dev, ChipConfig) ^ SpeedStatus_Polarity;
+
+			printf("%s: Transceiver 10%s %s duplex.\n", dev->name,
+			       (chpcfg & GigSpeed) ? "00" : (chpcfg & HundSpeed)
+			       ? "0" : "",
+			       chpcfg & FullDuplex ? "full" : "half");
+			printf("%s: %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
+			       dev->enetaddr[0], dev->enetaddr[1],
+			       dev->enetaddr[2], dev->enetaddr[3],
+			       dev->enetaddr[4], dev->enetaddr[5]);
+		}
+#endif
+		/* Disable PME:
+		 * The PME bit is initialized from the EEPROM contents.
+		 * PCI cards probably have PME disabled, but motherboard
+		 * implementations may have PME set to enable WakeOnLan.
+		 * With PME set the chip will scan incoming packets but
+		 * nothing will be written to memory. */
+		SavedClkRun = INL(dev, ClkRun);
+		OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+		eth_register(dev);
+
+		card_number++;
+
+		pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x60);
+
+		udelay(10 * 1000);
+	}
+	return card_number;
+}
+
+/*  MII transceiver control section.
+	Read and write MII registers using software-generated serial MDIO
+	protocol.  See the MII specifications or DP83840A data sheet for details.
+
+	The maximum data clock rate is 2.5 Mhz.  To meet minimum timing we
+	must flush writes to the PCI bus with a PCI read. */
+#define mdio_delay(mdio_addr) INL(dev, mdio_addr)
+
+#define MDIO_EnbIn  (0)
+#define MDIO_WRITE0 (MDIO_EnbOutput)
+#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput)
+
+/* Generate the preamble required for initial synchronization and
+   a few older transceivers. */
+static void
+mdio_sync(struct eth_device *dev, u32 offset)
+{
+	int bits = 32;
+
+	/* Establish sync by sending at least 32 logic ones. */
+	while (--bits >= 0) {
+		OUTL(dev, MDIO_WRITE1, offset);
+		mdio_delay(offset);
+		OUTL(dev, MDIO_WRITE1 | MDIO_ShiftClk, offset);
+		mdio_delay(offset);
+	}
+}
+
+static int
+mdio_read(struct eth_device *dev, int phy_id, int addr)
+{
+	int mii_cmd = (0xf6 << 10) | (phy_id << 5) | addr;
+	int i, retval = 0;
+
+	/* Shift the read command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		OUTL(dev, dataval, EECtrl);
+		mdio_delay(EECtrl);
+		OUTL(dev, dataval | MDIO_ShiftClk, EECtrl);
+		mdio_delay(EECtrl);
+	}
+	/* Read the two transition, 16 data, and wire-idle bits. */
+	for (i = 19; i > 0; i--) {
+		OUTL(dev, MDIO_EnbIn, EECtrl);
+		mdio_delay(EECtrl);
+		retval =
+		    (retval << 1) | ((INL(dev, EECtrl) & MDIO_Data) ? 1 : 0);
+		OUTL(dev, MDIO_EnbIn | MDIO_ShiftClk, EECtrl);
+		mdio_delay(EECtrl);
+	}
+	return (retval >> 1) & 0xffff;
+}
+
+static void
+mdio_write(struct eth_device *dev, int phy_id, int addr, int value)
+{
+	int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (addr << 18) | value;
+	int i;
+
+	/* Shift the command bits out. */
+	for (i = 31; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+
+		OUTL(dev, dataval, EECtrl);
+		mdio_delay(EECtrl);
+		OUTL(dev, dataval | MDIO_ShiftClk, EECtrl);
+		mdio_delay(EECtrl);
+	}
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		OUTL(dev, MDIO_EnbIn, EECtrl);
+		mdio_delay(EECtrl);
+		OUTL(dev, MDIO_EnbIn | MDIO_ShiftClk, EECtrl);
+		mdio_delay(EECtrl);
+	}
+	return;
+}
+
+/* Function: ns8382x_init
+ * Description: resets the ethernet controller chip and configures
+ *    registers and data structures required for sending and receiving packets.
+ * Arguments: struct eth_device *dev:       NIC data structure
+ * returns:  	int.
+ */
+
+static int
+ns8382x_init(struct eth_device *dev, bd_t * bis)
+{
+	u32 config;
+
+	ns8382x_reset(dev);
+
+	/* Disable PME:
+	 * The PME bit is initialized from the EEPROM contents.
+	 * PCI cards probably have PME disabled, but motherboard
+	 * implementations may have PME set to enable WakeOnLan.
+	 * With PME set the chip will scan incoming packets but
+	 * nothing will be written to memory. */
+	OUTL(dev, SavedClkRun & ~0x100, ClkRun);
+
+	ns8382x_init_rxfilter(dev);
+	ns8382x_init_txd(dev);
+	ns8382x_init_rxd(dev);
+
+	/*set up ChipConfig */
+	config = INL(dev, ChipConfig);
+	/*turn off 64 bit ops && Ten-bit interface
+	 * && big-endian mode && extended status */
+	config &= ~(TBIEn | Mode1000 | T64En | D64En | M64En | BEMode | PhyDis | ExtStEn);
+	OUTL(dev, config, ChipConfig);
+
+	/* Configure the PCI bus bursts and FIFO thresholds. */
+	tx_config = TxCarrierIgn | TxHeartIgn | TxAutoPad
+	    | TxCollRetry | TxMxdma_1024 | (0x1002);
+	rx_config = RxMxdma_1024 | 0x20;
+#ifdef NS8382X_DEBUG
+	printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config);
+	printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+	OUTL(dev, tx_config, TxConfig);
+	OUTL(dev, rx_config, RxConfig);
+
+	/*turn off priority queueing */
+	OUTL(dev, 0x0, PriQueue);
+
+	ns8382x_check_duplex(dev);
+	ns8382x_set_rx_mode(dev);
+
+	OUTL(dev, (RxOn | TxOn), ChipCmd);
+	return 1;
+}
+
+/* Function: ns8382x_reset
+ * Description: soft resets the controller chip
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * Returns:   void.
+ */
+static void
+ns8382x_reset(struct eth_device *dev)
+{
+	OUTL(dev, ChipReset, ChipCmd);
+	while (INL(dev, ChipCmd))
+		/*wait until done */ ;
+	OUTL(dev, 0, IntrMask);
+	OUTL(dev, 0, IntrEnable);
+}
+
+/* Function: ns8382x_init_rxfilter
+ * Description: sets receive filter address to our MAC address
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * returns:   void.
+ */
+
+static void
+ns8382x_init_rxfilter(struct eth_device *dev)
+{
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i += 2) {
+		OUTL(dev, i, RxFilterAddr);
+		OUTW(dev, dev->enetaddr[i] + (dev->enetaddr[i + 1] << 8),
+		     RxFilterData);
+	}
+}
+
+/* Function: ns8382x_init_txd
+ * Description: initializes the Tx descriptor
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * returns:   void.
+ */
+
+static void
+ns8382x_init_txd(struct eth_device *dev)
+{
+	txd.link = (u32) 0;
+	txd.bufptr = cpu_to_le32((u32) & txb[0]);
+	txd.cmdsts = (u32) 0;
+	txd.extsts = (u32) 0;
+
+	OUTL(dev, 0x0, TxRingPtrHi);
+	OUTL(dev, phys_to_bus((u32)&txd), TxRingPtr);
+#ifdef NS8382X_DEBUG
+	printf("ns8382x_init_txd: TX descriptor register loaded with: %#08X (&txd: %p)\n",
+	       INL(dev, TxRingPtr), &txd);
+#endif
+}
+
+/* Function: ns8382x_init_rxd
+ * Description: initializes the Rx descriptor ring
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * Returns:   void.
+ */
+
+static void
+ns8382x_init_rxd(struct eth_device *dev)
+{
+	int i;
+
+	OUTL(dev, 0x0, RxRingPtrHi);
+
+	cur_rx = 0;
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		rxd[i].link =
+		    cpu_to_le32((i + 1 <
+				 NUM_RX_DESC) ? (u32) & rxd[i +
+							    1] : (u32) &
+				rxd[0]);
+		rxd[i].extsts = cpu_to_le32((u32) 0x0);
+		rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE);
+		rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]);
+#ifdef NS8382X_DEBUG
+		printf
+		    ("ns8382x_init_rxd: rxd[%d]=%p link=%X cmdsts=%X bufptr=%X\n",
+		     i, &rxd[i], le32_to_cpu(rxd[i].link),
+		     le32_to_cpu(rxd[i].cmdsts), le32_to_cpu(rxd[i].bufptr));
+#endif
+	}
+	OUTL(dev, phys_to_bus((u32) & rxd), RxRingPtr);
+
+#ifdef NS8382X_DEBUG
+	printf("ns8382x_init_rxd: RX descriptor register loaded with: %X\n",
+	       INL(dev, RxRingPtr));
+#endif
+}
+
+/* Function: ns8382x_set_rx_mode
+ * Description:
+ *    sets the receive mode to accept all broadcast packets and packets
+ *    with our MAC address, and reject all multicast packets.
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * Returns:   void.
+ */
+
+static void
+ns8382x_set_rx_mode(struct eth_device *dev)
+{
+	u32 rx_mode = 0x0;
+	/*spec says RxFilterEnable has to be 0 for rest of
+	 * this stuff to be properly configured. Linux driver
+	 * seems to support this*/
+/*	OUTL(dev, rx_mode, RxFilterAddr);*/
+	rx_mode = (RxFilterEnable | AcceptAllBroadcast | AcceptPerfectMatch);
+	OUTL(dev, rx_mode, RxFilterAddr);
+	printf("ns8382x_set_rx_mode: set to %X\n", rx_mode);
+	/*now we turn RxFilterEnable back on */
+	/*rx_mode |= RxFilterEnable;
+	OUTL(dev, rx_mode, RxFilterAddr);*/
+}
+
+static void
+ns8382x_check_duplex(struct eth_device *dev)
+{
+	int gig = 0;
+	int hun = 0;
+	int duplex = 0;
+	int config = (INL(dev, ChipConfig) ^ SpeedStatus_Polarity);
+
+	duplex = (config & FullDuplex) ? 1 : 0;
+	gig = (config & GigSpeed) ? 1 : 0;
+	hun = (config & HundSpeed) ? 1 : 0;
+#ifdef NS8382X_DEBUG
+	printf("%s: Setting 10%s %s-duplex based on negotiated link"
+	       " capability.\n", dev->name, (gig) ? "00" : (hun) ? "0" : "",
+	       duplex ? "full" : "half");
+#endif
+	if (duplex) {
+		rx_config |= RxAcceptTx;
+		tx_config |= (TxCarrierIgn | TxHeartIgn);
+	} else {
+		rx_config &= ~RxAcceptTx;
+		tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+	}
+#ifdef NS8382X_DEBUG
+	printf("%s: Resetting TxConfig Register %#08X\n", dev->name, tx_config);
+	printf("%s: Resetting RxConfig Register %#08X\n", dev->name, rx_config);
+#endif
+	OUTL(dev, tx_config, TxConfig);
+	OUTL(dev, rx_config, RxConfig);
+
+	/*if speed is 10 or 100, remove MODE1000,
+	 * if it's 1000, then set it */
+	config = INL(dev, ChipConfig);
+	if (gig)
+		config |= Mode1000;
+	else
+		config &= ~Mode1000;
+
+#ifdef NS8382X_DEBUG
+	printf("%s: %setting Mode1000\n", dev->name, (gig) ? "S" : "Uns");
+#endif
+	OUTL(dev, config, ChipConfig);
+}
+
+/* Function: ns8382x_send
+ * Description: transmits a packet and waits for completion or timeout.
+ * Returns:   void.  */
+static int
+ns8382x_send(struct eth_device *dev, volatile void *packet, int length)
+{
+	u32 i, status = 0;
+	u32 tx_stat = 0;
+
+	/* Stop the transmitter */
+	OUTL(dev, TxOff, ChipCmd);
+#ifdef NS8382X_DEBUG
+	printf("ns8382x_send: sending %d bytes\n", (int)length);
+#endif
+
+	/* set the transmit buffer descriptor and enable Transmit State Machine */
+	txd.link = cpu_to_le32(0x0);
+	txd.bufptr = cpu_to_le32(phys_to_bus((u32)packet));
+	txd.extsts = cpu_to_le32(0x0);
+	txd.cmdsts = cpu_to_le32(DescOwn | length);
+
+	/* load Transmit Descriptor Register */
+	OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr);
+#ifdef NS8382X_DEBUG
+	printf("ns8382x_send: TX descriptor register loaded with: %#08X\n",
+	       INL(dev, TxRingPtr));
+	printf("\ttxd.link:%X\tbufp:%X\texsts:%X\tcmdsts:%X\n",
+	       le32_to_cpu(txd.link), le32_to_cpu(txd.bufptr),
+	       le32_to_cpu(txd.extsts), le32_to_cpu(txd.cmdsts));
+#endif
+	/* restart the transmitter */
+	OUTL(dev, TxOn, ChipCmd);
+
+	for (i = 0; ((vu_long)tx_stat = le32_to_cpu(txd.cmdsts)) & DescOwn; i++) {
+		if (i >= TOUT_LOOP) {
+			printf ("%s: tx error buffer not ready: txd.cmdsts %#X\n",
+			     dev->name, tx_stat);
+			goto Done;
+		}
+	}
+
+	if (!(tx_stat & DescPktOK)) {
+		printf("ns8382x_send: Transmit error, Tx status %X.\n", tx_stat);
+		goto Done;
+	}
+#ifdef NS8382X_DEBUG
+	printf("ns8382x_send: tx_stat: %#08X\n", tx_stat);
+#endif
+
+	status = 1;
+      Done:
+	return status;
+}
+
+/* Function: ns8382x_poll
+ * Description: checks for a received packet and returns it if found.
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * Returns:   1 if    packet was received.
+ *            0 if no packet was received.
+ * Side effects:
+ *            Returns (copies) the packet to the array dev->packet.
+ *            Returns the length of the packet.
+ */
+
+static int
+ns8382x_poll(struct eth_device *dev)
+{
+	int retstat = 0;
+	int length = 0;
+	vu_long rx_status = le32_to_cpu(rxd[cur_rx].cmdsts);
+
+	if (!(rx_status & (u32) DescOwn))
+		return retstat;
+#ifdef NS8382X_DEBUG
+	printf("ns8382x_poll: got a packet: cur_rx:%u, status:%lx\n",
+	       cur_rx, rx_status);
+#endif
+	length = (rx_status & DSIZE) - CRC_SIZE;
+
+	if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {
+		/* corrupted packet received */
+		printf("ns8382x_poll: Corrupted packet, status:%lx\n", rx_status);
+		retstat = 0;
+	} else {
+		/* give packet to higher level routine */
+		NetReceive((rxb + cur_rx * RX_BUF_SIZE), length);
+		retstat = 1;
+	}
+
+	/* return the descriptor and buffer to receive ring */
+	rxd[cur_rx].cmdsts = cpu_to_le32(RX_BUF_SIZE);
+	rxd[cur_rx].bufptr = cpu_to_le32((u32) & rxb[cur_rx * RX_BUF_SIZE]);
+
+	if (++cur_rx == NUM_RX_DESC)
+		cur_rx = 0;
+
+	/* re-enable the potentially idle receive state machine */
+	OUTL(dev, RxOn, ChipCmd);
+
+	return retstat;
+}
+
+/* Function: ns8382x_disable
+ * Description: Turns off interrupts and stops Tx and Rx engines
+ * Arguments: struct eth_device *dev:          NIC data structure
+ * Returns:   void.
+ */
+
+static void
+ns8382x_disable(struct eth_device *dev)
+{
+	/* Disable interrupts using the mask. */
+	OUTL(dev, 0, IntrMask);
+	OUTL(dev, 0, IntrEnable);
+
+	/* Stop the chip's Tx and Rx processes. */
+	OUTL(dev, (RxOff | TxOff), ChipCmd);
+
+	/* Restore PME enable bit */
+	OUTL(dev, SavedClkRun, ClkRun);
+}
+
+#endif
diff --git a/drivers/smc91111.c b/drivers/smc91111.c
new file mode 100644
index 00000000000..62d213339ef
--- /dev/null
+++ b/drivers/smc91111.c
@@ -0,0 +1,1383 @@
+/*------------------------------------------------------------------------
+ . smc91111.c
+ . This is a driver for SMSC's 91C111 single-chip Ethernet device.
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ .
+ . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ .       Developed by Simple Network Magic Corporation (SNMC)
+ . Copyright (C) 1996 by Erik Stahlman (ES)
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ .
+ . Information contained in this file was obtained from the LAN91C111
+ . manual from SMC.  To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ .
+ . "Features" of the SMC chip:
+ .   Integrated PHY/MAC for 10/100BaseT Operation
+ .   Supports internal and external MII
+ .   Integrated 8K packet memory
+ .   EEPROM interface for configuration
+ .
+ . Arguments:
+ . 	io	= for the base address
+ .	irq	= for the IRQ
+ .
+ . author:
+ . 	Erik Stahlman				( erik@vt.edu )
+ . 	Daris A Nevil				( dnevil@snmc.com )
+ .
+ .
+ . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
+ .
+ . Sources:
+ .    o   SMSC LAN91C111 databook (www.smsc.com)
+ .    o   smc9194.c by Erik Stahlman
+ .    o   skeleton.c by Donald Becker ( becker@cesdis.gsfc.nasa.gov )
+ .
+ . History:
+ .	10/17/01  Marco Hasewinkel Modify for DNP/1110
+ .	07/25/01  Woojung Huh      Modify for ADS Bitsy
+ .	04/25/01  Daris A Nevil    Initial public release through SMSC
+ .	03/16/01  Daris A Nevil    Modified smc9194.c for use with LAN91C111
+ ----------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <command.h>
+#include "smc91111.h"
+#include <net.h>
+
+#ifdef CONFIG_DRIVER_SMC91111
+
+/* Use power-down feature of the chip */
+#define POWER_DOWN	0
+
+#define NO_AUTOPROBE
+
+static const char version[] =
+	"smc91111.c:v1.0 04/25/01 by Daris A Nevil (dnevil@snmc.com)\n";
+
+#define SMC_DEBUG 0
+
+/*------------------------------------------------------------------------
+ .
+ . Configuration options, for the experienced user to change.
+ .
+ -------------------------------------------------------------------------*/
+
+/*
+ . Wait time for memory to be free.  This probably shouldn't be
+ . tuned that much, as waiting for this means nothing else happens
+ . in the system
+*/
+#define MEMORY_WAIT_TIME 16
+
+
+#if (SMC_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if SMC_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef SMC_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+/*------------------------------------------------------------------------
+ .
+ . The internal workings of the driver.  If you are changing anything
+ . here with the SMC stuff, you should have the datasheet and know
+ . what you are doing.
+ .
+ -------------------------------------------------------------------------*/
+#define CARDNAME "LAN91C111"
+
+/* Memory sizing constant */
+#define LAN91C111_MEMORY_MULTIPLIER	(1024*2)
+
+#ifndef CONFIG_SMC91111_BASE
+#define CONFIG_SMC91111_BASE 0x20000300
+#endif
+
+#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
+
+#define SMC_DEV_NAME "SMC91111"
+#define SMC_PHY_ADDR 0x0000
+#define SMC_ALLOC_MAX_TRY 5
+#define SMC_TX_TIMEOUT 30
+
+#define SMC_PHY_CLOCK_DELAY 1000
+
+#define ETH_ZLEN 60
+
+#ifdef  CONFIG_SMC_USE_32_BIT
+#define USE_32_BIT  1
+#else
+#undef USE_32_BIT
+#endif
+/*-----------------------------------------------------------------
+ .
+ .  The driver can be entered at any of the following entry points.
+ .
+ .------------------------------------------------------------------  */
+
+extern int eth_init(bd_t *bd);
+extern void eth_halt(void);
+extern int eth_rx(void);
+extern int eth_send(volatile void *packet, int length);
+
+
+
+
+
+/*
+ . This is called by  register_netdev().  It is responsible for
+ . checking the portlist for the SMC9000 series chipset.  If it finds
+ . one, then it will initialize the device, find the hardware information,
+ . and sets up the appropriate device parameters.
+ . NOTE: Interrupts are *OFF* when this procedure is called.
+ .
+ . NB:This shouldn't be static since it is referred to externally.
+*/
+int smc_init(void);
+
+/*
+ . This is called by  unregister_netdev().  It is responsible for
+ . cleaning up before the driver is finally unregistered and discarded.
+*/
+void smc_destructor(void);
+
+/*
+ . The kernel calls this function when someone wants to use the device,
+ . typically 'ifconfig ethX up'.
+*/
+static int smc_open(void);
+
+
+/*
+ . This is called by the kernel in response to 'ifconfig ethX down'.  It
+ . is responsible for cleaning up everything that the open routine
+ . does, and maybe putting the card into a powerdown state.
+*/
+static int smc_close(void);
+
+/*
+ . Configures the PHY through the MII Management interface
+*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_phy_configure(void);
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+/*
+ . This is a separate procedure to handle the receipt of a packet, to
+ . leave the interrupt code looking slightly cleaner
+*/
+static int smc_rcv(void);
+
+
+
+/*
+ ------------------------------------------------------------
+ .
+ . Internal routines
+ .
+ ------------------------------------------------------------
+*/
+
+static char smc_mac_addr[] = {0x02, 0x80, 0xad, 0x20, 0x31, 0xb8};
+
+/*
+ * This function must be called before smc_open() if you want to override
+ * the default mac address.
+ */
+
+void smc_set_mac_addr(const char *addr) {
+	int i;
+
+	for (i=0; i < sizeof(smc_mac_addr); i++){
+		smc_mac_addr[i] = addr[i];
+	}
+}
+
+/*
+ * smc_get_macaddr is no longer used. If you want to override the default
+ * mac address, call smc_get_mac_addr as a part of the board initialisation.
+ */
+
+#if 0
+void smc_get_macaddr( byte *addr ) {
+	/* MAC ADDRESS AT FLASHBLOCK 1 / OFFSET 0x10 */
+        unsigned char *dnp1110_mac = (unsigned char *) (0xE8000000 + 0x20010);
+	int i;
+
+
+        for (i=0; i<6; i++) {
+            addr[0] = *(dnp1110_mac+0);
+            addr[1] = *(dnp1110_mac+1);
+            addr[2] = *(dnp1110_mac+2);
+            addr[3] = *(dnp1110_mac+3);
+            addr[4] = *(dnp1110_mac+4);
+            addr[5] = *(dnp1110_mac+5);
+        }
+}
+#endif /* 0 */
+
+/***********************************************
+ * Show available memory                       *
+ ***********************************************/
+void dump_memory_info(void)
+{
+        word mem_info;
+        word old_bank;
+
+        old_bank = SMC_inw(BANK_SELECT)&0xF;
+
+        SMC_SELECT_BANK(0);
+        mem_info = SMC_inw( MIR_REG );
+        PRINTK2("Memory: %4d available\n", (mem_info >> 8)*2048);
+
+        SMC_SELECT_BANK(old_bank);
+}
+/*
+ . A rather simple routine to print out a packet for debugging purposes.
+*/
+#if SMC_DEBUG > 2
+static void print_packet( byte *, int );
+#endif
+
+#define tx_done(dev) 1
+
+
+
+/* this does a soft reset on the device */
+static void smc_reset( void );
+
+/* Enable Interrupts, Receive, and Transmit */
+static void smc_enable( void );
+
+/* this puts the device in an inactive state */
+static void smc_shutdown( void );
+
+/* Routines to Read and Write the PHY Registers across the
+   MII Management Interface
+*/
+
+#ifndef CONFIG_SMC91111_EXT_PHY
+static word smc_read_phy_register(byte phyreg);
+static void smc_write_phy_register(byte phyreg, word phydata);
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+static int poll4int( byte mask, int timeout ) {
+    int tmo = get_timer(0) + timeout * CFG_HZ;
+    int is_timeout = 0;
+    word old_bank = SMC_inw(BSR_REG);
+
+    PRINTK2("Polling...\n");
+    SMC_SELECT_BANK(2);
+    while((SMC_inw(SMC91111_INT_REG) & mask) == 0)
+    {
+        if (get_timer(0) >= tmo) {
+	  is_timeout = 1;
+          break;
+	}
+    }
+
+    /* restore old bank selection */
+    SMC_SELECT_BANK(old_bank);
+
+    if (is_timeout)
+	return 1;
+    else
+	return 0;
+}
+
+/*
+ . Function: smc_reset( void )
+ . Purpose:
+ .  	This sets the SMC91111 chip to its normal state, hopefully from whatever
+ . 	mess that any other DOS driver has put it in.
+ .
+ . Maybe I should reset more registers to defaults in here?  SOFTRST  should
+ . do that for me.
+ .
+ . Method:
+ .	1.  send a SOFT RESET
+ .	2.  wait for it to finish
+ .	3.  enable autorelease mode
+ .	4.  reset the memory management unit
+ .	5.  clear all interrupts
+ .
+*/
+static void smc_reset( void )
+{
+	PRINTK2("%s:smc_reset\n", SMC_DEV_NAME);
+
+	/* This resets the registers mostly to defaults, but doesn't
+	   affect EEPROM.  That seems unnecessary */
+	SMC_SELECT_BANK( 0 );
+	SMC_outw( RCR_SOFTRST, RCR_REG );
+
+	/* Setup the Configuration Register */
+	/* This is necessary because the CONFIG_REG is not affected */
+	/* by a soft reset */
+
+	SMC_SELECT_BANK( 1 );
+#if defined(CONFIG_SMC91111_EXT_PHY)
+	SMC_outw( CONFIG_DEFAULT | CONFIG_EXT_PHY, CONFIG_REG);
+#else
+	SMC_outw( CONFIG_DEFAULT, CONFIG_REG);
+#endif
+
+
+	/* Release from possible power-down state */
+	/* Configuration register is not affected by Soft Reset */
+	SMC_outw( SMC_inw( CONFIG_REG ) | CONFIG_EPH_POWER_EN, CONFIG_REG  );
+
+	SMC_SELECT_BANK( 0 );
+
+	/* this should pause enough for the chip to be happy */
+	udelay(10);
+
+	/* Disable transmit and receive functionality */
+	SMC_outw( RCR_CLEAR, RCR_REG );
+	SMC_outw( TCR_CLEAR, TCR_REG );
+
+	/* set the control register */
+	SMC_SELECT_BANK( 1 );
+	SMC_outw( CTL_DEFAULT, CTL_REG );
+
+	/* Reset the MMU */
+	SMC_SELECT_BANK( 2 );
+	SMC_outw( MC_RESET, MMU_CMD_REG );
+	while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+		udelay(1); /* Wait until not busy */
+
+	/* Note:  It doesn't seem that waiting for the MMU busy is needed here,
+	   but this is a place where future chipsets _COULD_ break.  Be wary
+ 	   of issuing another MMU command right after this */
+
+	/* Disable all interrupts */
+	SMC_outb( 0, IM_REG );
+}
+
+/*
+ . Function: smc_enable
+ . Purpose: let the chip talk to the outside work
+ . Method:
+ .	1.  Enable the transmitter
+ .	2.  Enable the receiver
+ .	3.  Enable interrupts
+*/
+static void smc_enable()
+{
+	PRINTK2("%s:smc_enable\n", SMC_DEV_NAME);
+	SMC_SELECT_BANK( 0 );
+	/* see the header file for options in TCR/RCR DEFAULT*/
+	SMC_outw( TCR_DEFAULT, TCR_REG );
+	SMC_outw( RCR_DEFAULT, RCR_REG );
+
+	/* clear MII_DIS */
+/*	smc_write_phy_register(PHY_CNTL_REG, 0x0000); */
+}
+
+/*
+ . Function: smc_shutdown
+ . Purpose:  closes down the SMC91xxx chip.
+ . Method:
+ .	1. zero the interrupt mask
+ .	2. clear the enable receive flag
+ .	3. clear the enable xmit flags
+ .
+ . TODO:
+ .   (1) maybe utilize power down mode.
+ .	Why not yet?  Because while the chip will go into power down mode,
+ .	the manual says that it will wake up in response to any I/O requests
+ .	in the register space.   Empirical results do not show this working.
+*/
+static void smc_shutdown()
+{
+	PRINTK2(CARDNAME ":smc_shutdown\n");
+
+	/* no more interrupts for me */
+	SMC_SELECT_BANK( 2 );
+	SMC_outb( 0, IM_REG );
+
+	/* and tell the card to stay away from that nasty outside world */
+	SMC_SELECT_BANK( 0 );
+	SMC_outb( RCR_CLEAR, RCR_REG );
+	SMC_outb( TCR_CLEAR, TCR_REG );
+}
+
+
+/*
+ . Function:  smc_hardware_send_packet(struct net_device * )
+ . Purpose:
+ .	This sends the actual packet to the SMC9xxx chip.
+ .
+ . Algorithm:
+ . 	First, see if a saved_skb is available.
+ .		( this should NOT be called if there is no 'saved_skb'
+ .	Now, find the packet number that the chip allocated
+ .	Point the data pointers at it in memory
+ .	Set the length word in the chip's memory
+ .	Dump the packet to chip memory
+ .	Check if a last byte is needed ( odd length packet )
+ .		if so, set the control flag right
+ . 	Tell the card to send it
+ .	Enable the transmit interrupt, so I know if it failed
+ . 	Free the kernel data if I actually sent it.
+*/
+static int smc_send_packet(volatile void *packet, int packet_length)
+{
+	byte	 		packet_no;
+	unsigned long		ioaddr;
+	byte			* buf;
+	int			length;
+	int			numPages;
+	int			try = 0;
+	int			time_out;
+	byte			status;
+
+
+	PRINTK3("%s:smc_hardware_send_packet\n", SMC_DEV_NAME);
+
+	length = ETH_ZLEN < packet_length ? packet_length : ETH_ZLEN;
+
+	/* allocate memory
+	** The MMU wants the number of pages to be the number of 256 bytes
+	** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
+	**
+	** The 91C111 ignores the size bits, but the code is left intact
+	** for backwards and future compatibility.
+	**
+	** Pkt size for allocating is data length +6 (for additional status
+	** words, length and ctl!)
+	**
+	** If odd size then last byte is included in this header.
+	*/
+	numPages =   ((length & 0xfffe) + 6);
+	numPages >>= 8; /* Divide by 256 */
+
+	if (numPages > 7 ) {
+		printf("%s: Far too big packet error. \n", SMC_DEV_NAME);
+		return 0;
+	}
+
+	/* now, try to allocate the memory */
+	SMC_SELECT_BANK( 2 );
+	SMC_outw( MC_ALLOC | numPages, MMU_CMD_REG );
+
+again:
+	try++;
+	time_out = MEMORY_WAIT_TIME;
+	do {
+		status = SMC_inb( SMC91111_INT_REG );
+		if ( status & IM_ALLOC_INT ) {
+			/* acknowledge the interrupt */
+			SMC_outb( IM_ALLOC_INT, SMC91111_INT_REG );
+  			break;
+		}
+   	} while ( -- time_out );
+
+   	if ( !time_out ) {
+			PRINTK2("%s: memory allocation, try %d failed ...\n",
+				SMC_DEV_NAME, try);
+			if (try < SMC_ALLOC_MAX_TRY)
+				goto again;
+			else
+				return 0;
+	}
+
+	PRINTK2("%s: memory allocation, try %d succeeded ...\n",
+		SMC_DEV_NAME,
+		try);
+
+	/* I can send the packet now.. */
+
+	ioaddr = SMC_BASE_ADDRESS;
+
+	buf = (byte *)packet;
+
+	/* If I get here, I _know_ there is a packet slot waiting for me */
+	packet_no = SMC_inb( AR_REG );
+	if ( packet_no & AR_FAILED ) {
+		/* or isn't there?  BAD CHIP! */
+		printf("%s: Memory allocation failed. \n",
+			SMC_DEV_NAME);
+		return 0;
+	}
+
+	/* we have a packet address, so tell the card to use it */
+	SMC_outb( packet_no, PN_REG );
+
+	/* point to the beginning of the packet */
+	SMC_outw( PTR_AUTOINC , PTR_REG );
+
+   	PRINTK3("%s: Trying to xmit packet of length %x\n",
+		SMC_DEV_NAME, length);
+
+#if SMC_DEBUG > 2
+	printf("Transmitting Packet\n");
+	print_packet( buf, length );
+#endif
+
+	/* send the packet length ( +6 for status, length and ctl byte )
+ 	   and the status word ( set to zeros ) */
+#ifdef USE_32_BIT
+	SMC_outl(  (length +6 ) << 16 , SMC91111_DATA_REG );
+#else
+	SMC_outw( 0, SMC91111_DATA_REG );
+	/* send the packet length ( +6 for status words, length, and ctl*/
+	SMC_outw( (length+6), SMC91111_DATA_REG );
+#endif
+
+	/* send the actual data
+	 . I _think_ it's faster to send the longs first, and then
+	 . mop up by sending the last word.  It depends heavily
+ 	 . on alignment, at least on the 486.  Maybe it would be
+ 	 . a good idea to check which is optimal?  But that could take
+	 . almost as much time as is saved?
+	*/
+#ifdef USE_32_BIT
+	SMC_outsl(SMC91111_DATA_REG, buf,  length >> 2 );
+	if ( length & 0x2  )
+		SMC_outw(*((word *)(buf + (length & 0xFFFFFFFC))), SMC91111_DATA_REG);
+#else
+	SMC_outsw(SMC91111_DATA_REG , buf, (length ) >> 1);
+#endif /* USE_32_BIT */
+
+	/* Send the last byte, if there is one.   */
+	if ( (length & 1) == 0 ) {
+		SMC_outw( 0, SMC91111_DATA_REG );
+	} else {
+		SMC_outw( buf[length -1 ] | 0x2000, SMC91111_DATA_REG );
+	}
+
+	/* and let the chipset deal with it */
+	SMC_outw( MC_ENQUEUE , MMU_CMD_REG );
+
+	/* poll for TX INT */
+	if (poll4int(IM_TX_INT, SMC_TX_TIMEOUT)) {
+		/* sending failed */
+		PRINTK2("%s: TX timeout, sending failed...\n",
+			SMC_DEV_NAME);
+
+		/* release packet */
+	        SMC_outw(MC_FREEPKT, MMU_CMD_REG);
+
+        	/* wait for MMU getting ready (low) */
+	        while (SMC_inw(MMU_CMD_REG) & MC_BUSY)
+        	{
+                	udelay(10);
+	        }
+
+        	PRINTK2("MMU ready\n");
+
+
+		return 0;
+	} else {
+		/* ack. int */
+		SMC_outw(IM_TX_INT, SMC91111_INT_REG);
+		PRINTK2("%s: Sent packet of length %d \n", SMC_DEV_NAME, length);
+
+		/* release packet */
+	        SMC_outw(MC_FREEPKT, MMU_CMD_REG);
+
+        	/* wait for MMU getting ready (low) */
+	        while (SMC_inw(MMU_CMD_REG) & MC_BUSY)
+        	{
+                	udelay(10);
+	        }
+
+        	PRINTK2("MMU ready\n");
+
+
+	}
+
+	return length;
+}
+
+/*-------------------------------------------------------------------------
+ |
+ | smc_destructor( struct net_device * dev )
+ |   Input parameters:
+ |	dev, pointer to the device structure
+ |
+ |   Output:
+ |	None.
+ |
+ ---------------------------------------------------------------------------
+*/
+void smc_destructor()
+{
+	PRINTK2(CARDNAME ":smc_destructor\n");
+}
+
+
+/*
+ * Open and Initialize the board
+ *
+ * Set up everything, reset the card, etc ..
+ *
+ */
+static int smc_open()
+{
+	int	i;	/* used to set hw ethernet address */
+
+	PRINTK2("%s:smc_open\n", SMC_DEV_NAME);
+
+	/* reset the hardware */
+
+	smc_reset();
+	smc_enable();
+
+	/* Configure the PHY */
+#ifndef CONFIG_SMC91111_EXT_PHY
+	smc_phy_configure();
+#endif
+
+
+	/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
+/*	SMC_SELECT_BANK(0); */
+/*	SMC_outw(0, RPC_REG); */
+
+#ifdef USE_32_BIT
+	for ( i = 0; i < 6; i += 2 ) {
+		word address;
+
+		address = smc_mac_addr[ i + 1 ] << 8 ;
+		address  |= smc_mac_addr[ i ];
+		SMC_outw( address, ADDR0_REG + i );
+	}
+#else
+	for ( i = 0; i < 6; i ++ )
+		SMC_outb( smc_mac_addr[i], ADDR0_REG + i );
+#endif
+
+	return 0;
+}
+
+#if 0 /* dead code? -- wd */
+#ifdef USE_32_BIT
+void
+insl32(r,b,l)
+{
+   int __i ;
+   dword *__b2;
+
+	__b2 = (dword *) b;
+	for (__i = 0; __i < l; __i++) {
+		  *(__b2 + __i) = *(dword *)(r+0x10000300);
+	}
+}
+#endif
+#endif
+
+/*-------------------------------------------------------------
+ .
+ . smc_rcv -  receive a packet from the card
+ .
+ . There is ( at least ) a packet waiting to be read from
+ . chip-memory.
+ .
+ . o Read the status
+ . o If an error, record it
+ . o otherwise, read in the packet
+ --------------------------------------------------------------
+*/
+static int smc_rcv()
+{
+	int 	packet_number;
+	word	status;
+	word	packet_length;
+	int     is_error = 0;
+#ifdef USE_32_BIT
+	dword stat_len;
+#endif
+
+
+	SMC_SELECT_BANK(2);
+	packet_number = SMC_inw( RXFIFO_REG );
+
+	if ( packet_number & RXFIFO_REMPTY ) {
+
+		return 0;
+	}
+
+	PRINTK3("%s:smc_rcv\n", SMC_DEV_NAME);
+	/*  start reading from the start of the packet */
+	SMC_outw( PTR_READ | PTR_RCV | PTR_AUTOINC, PTR_REG );
+
+	/* First two words are status and packet_length */
+#ifdef USE_32_BIT
+	stat_len = SMC_inl(SMC91111_DATA_REG);
+	status = stat_len & 0xffff;
+	packet_length = stat_len >> 16;
+#else
+	status 		= SMC_inw( SMC91111_DATA_REG );
+	packet_length 	= SMC_inw( SMC91111_DATA_REG );
+#endif
+
+	packet_length &= 0x07ff;  /* mask off top bits */
+
+	PRINTK2("RCV: STATUS %4x LENGTH %4x\n", status, packet_length );
+
+	if ( !(status & RS_ERRORS ) ){
+		/* Adjust for having already read the first two words */
+		packet_length -= 4; /*4; */
+
+
+
+		/* set odd length for bug in LAN91C111, */
+		/* which never sets RS_ODDFRAME */
+		/* TODO ? */
+
+
+#ifdef USE_32_BIT
+		PRINTK3(" Reading %d dwords (and %d bytes) \n",
+			packet_length >> 2, packet_length & 3 );
+		/* QUESTION:  Like in the TX routine, do I want
+		   to send the DWORDs or the bytes first, or some
+		   mixture.  A mixture might improve already slow PIO
+		   performance  */
+		SMC_insl( SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 2 );
+		/* read the left over bytes */
+		if (packet_length & 3) {
+			int i;
+
+			byte *tail = NetRxPackets[0] + (packet_length & ~3);
+			dword leftover = SMC_inl(SMC91111_DATA_REG);
+			for (i=0; i<(packet_length & 3); i++)
+				*tail++ = (byte) (leftover >> (8*i)) & 0xff;
+		}
+#else
+		PRINTK3(" Reading %d words and %d byte(s) \n",
+			(packet_length >> 1 ), packet_length & 1 );
+		SMC_insw(SMC91111_DATA_REG , NetRxPackets[0], packet_length >> 1);
+
+#endif /* USE_32_BIT */
+
+#if	SMC_DEBUG > 2
+		printf("Receiving Packet\n");
+		print_packet( NetRxPackets[0], packet_length );
+#endif
+	} else {
+		/* error ... */
+		/* TODO ? */
+		is_error = 1;
+	}
+
+	while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+		udelay(1); /* Wait until not busy */
+
+	/*  error or good, tell the card to get rid of this packet */
+	SMC_outw( MC_RELEASE, MMU_CMD_REG );
+
+	while ( SMC_inw( MMU_CMD_REG ) & MC_BUSY )
+		udelay(1); /* Wait until not busy */
+
+	if (!is_error) {
+		/* Pass the packet up to the protocol layers. */
+		NetReceive(NetRxPackets[0], packet_length);
+		return packet_length;
+	} else {
+		return 0;
+	}
+
+}
+
+
+
+/*----------------------------------------------------
+ . smc_close
+ .
+ . this makes the board clean up everything that it can
+ . and not talk to the outside world.   Caused by
+ . an 'ifconfig ethX down'
+ .
+ -----------------------------------------------------*/
+static int smc_close()
+{
+	PRINTK2("%s:smc_close\n", SMC_DEV_NAME);
+
+	/* clear everything */
+	smc_shutdown();
+
+	return 0;
+}
+
+
+#if 0
+/*------------------------------------------------------------
+ . Modify a bit in the LAN91C111 register set
+ .-------------------------------------------------------------*/
+static word smc_modify_regbit(int bank, int ioaddr, int reg,
+	unsigned int bit, int val)
+{
+	word regval;
+
+	SMC_SELECT_BANK( bank );
+
+	regval = SMC_inw( reg );
+	if (val)
+		regval |= bit;
+	else
+		regval &= ~bit;
+
+	SMC_outw( regval, 0 );
+	return(regval);
+}
+
+
+/*------------------------------------------------------------
+ . Retrieve a bit in the LAN91C111 register set
+ .-------------------------------------------------------------*/
+static int smc_get_regbit(int bank, int ioaddr, int reg, unsigned int bit)
+{
+	SMC_SELECT_BANK( bank );
+	if ( SMC_inw( reg ) & bit)
+		return(1);
+	else
+		return(0);
+}
+
+
+/*------------------------------------------------------------
+ . Modify a LAN91C111 register (word access only)
+ .-------------------------------------------------------------*/
+static void smc_modify_reg(int bank, int ioaddr, int reg, word val)
+{
+	SMC_SELECT_BANK( bank );
+	SMC_outw( val, reg );
+}
+
+
+/*------------------------------------------------------------
+ . Retrieve a LAN91C111 register (word access only)
+ .-------------------------------------------------------------*/
+static int smc_get_reg(int bank, int ioaddr, int reg)
+{
+	SMC_SELECT_BANK( bank );
+	return(SMC_inw( reg ));
+}
+
+#endif /* 0 */
+
+/*---PHY CONTROL AND CONFIGURATION----------------------------------------- */
+
+#if (SMC_DEBUG > 2 )
+
+/*------------------------------------------------------------
+ . Debugging function for viewing MII Management serial bitstream
+ .-------------------------------------------------------------*/
+static void smc_dump_mii_stream(byte* bits, int size)
+{
+	int i;
+
+	printf("BIT#:");
+	for (i = 0; i < size; ++i)
+		{
+		printf("%d", i%10);
+		}
+
+	printf("\nMDOE:");
+	for (i = 0; i < size; ++i)
+		{
+		if (bits[i] & MII_MDOE)
+			printf("1");
+		else
+			printf("0");
+		}
+
+	printf("\nMDO :");
+	for (i = 0; i < size; ++i)
+		{
+		if (bits[i] & MII_MDO)
+			printf("1");
+		else
+			printf("0");
+		}
+
+	printf("\nMDI :");
+	for (i = 0; i < size; ++i)
+		{
+		if (bits[i] & MII_MDI)
+			printf("1");
+		else
+			printf("0");
+		}
+
+	printf("\n");
+}
+#endif
+
+/*------------------------------------------------------------
+ . Reads a register from the MII Management serial interface
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static word smc_read_phy_register(byte phyreg)
+{
+	int oldBank;
+	int i;
+	byte mask;
+	word mii_reg;
+	byte bits[64];
+	int clk_idx = 0;
+	int input_idx;
+	word phydata;
+	byte phyaddr = SMC_PHY_ADDR;
+
+	/* 32 consecutive ones on MDO to establish sync */
+	for (i = 0; i < 32; ++i)
+		bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Start code <01> */
+	bits[clk_idx++] = MII_MDOE;
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Read command <10> */
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+	bits[clk_idx++] = MII_MDOE;
+
+	/* Output the PHY address, msb first */
+	mask = (byte)0x10;
+	for (i = 0; i < 5; ++i)
+		{
+		if (phyaddr & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+		}
+
+	/* Output the phy register number, msb first */
+	mask = (byte)0x10;
+	for (i = 0; i < 5; ++i)
+		{
+		if (phyreg & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+		}
+
+	/* Tristate and turnaround (2 bit times) */
+	bits[clk_idx++] = 0;
+	/*bits[clk_idx++] = 0; */
+
+	/* Input starts at this bit time */
+	input_idx = clk_idx;
+
+	/* Will input 16 bits */
+	for (i = 0; i < 16; ++i)
+		bits[clk_idx++] = 0;
+
+	/* Final clock bit */
+	bits[clk_idx++] = 0;
+
+	/* Save the current bank */
+	oldBank = SMC_inw( BANK_SELECT );
+
+	/* Select bank 3 */
+	SMC_SELECT_BANK( 3 );
+
+	/* Get the current MII register value */
+	mii_reg = SMC_inw( MII_REG );
+
+	/* Turn off all MII Interface bits */
+	mii_reg &= ~(MII_MDOE|MII_MCLK|MII_MDI|MII_MDO);
+
+	/* Clock all 64 cycles */
+	for (i = 0; i < sizeof bits; ++i)
+		{
+		/* Clock Low - output data */
+		SMC_outw( mii_reg | bits[i], MII_REG );
+		udelay(SMC_PHY_CLOCK_DELAY);
+
+
+		/* Clock Hi - input data */
+		SMC_outw( mii_reg | bits[i] | MII_MCLK, MII_REG );
+		udelay(SMC_PHY_CLOCK_DELAY);
+		bits[i] |= SMC_inw( MII_REG ) & MII_MDI;
+		}
+
+	/* Return to idle state */
+	/* Set clock to low, data to low, and output tristated */
+	SMC_outw( mii_reg, MII_REG );
+	udelay(SMC_PHY_CLOCK_DELAY);
+
+	/* Restore original bank select */
+	SMC_SELECT_BANK( oldBank );
+
+	/* Recover input data */
+	phydata = 0;
+	for (i = 0; i < 16; ++i)
+		{
+		phydata <<= 1;
+
+		if (bits[input_idx++] & MII_MDI)
+			phydata |= 0x0001;
+		}
+
+#if (SMC_DEBUG > 2 )
+	printf("smc_read_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+		phyaddr, phyreg, phydata);
+	smc_dump_mii_stream(bits, sizeof bits);
+#endif
+
+	return(phydata);
+}
+
+
+/*------------------------------------------------------------
+ . Writes a register to the MII Management serial interface
+ .-------------------------------------------------------------*/
+static void smc_write_phy_register(byte phyreg, word phydata)
+{
+	int oldBank;
+	int i;
+	word mask;
+	word mii_reg;
+	byte bits[65];
+	int clk_idx = 0;
+	byte phyaddr = SMC_PHY_ADDR;
+
+	/* 32 consecutive ones on MDO to establish sync */
+	for (i = 0; i < 32; ++i)
+		bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Start code <01> */
+	bits[clk_idx++] = MII_MDOE;
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Write command <01> */
+	bits[clk_idx++] = MII_MDOE;
+	bits[clk_idx++] = MII_MDOE | MII_MDO;
+
+	/* Output the PHY address, msb first */
+	mask = (byte)0x10;
+	for (i = 0; i < 5; ++i)
+		{
+		if (phyaddr & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+		}
+
+	/* Output the phy register number, msb first */
+	mask = (byte)0x10;
+	for (i = 0; i < 5; ++i)
+		{
+		if (phyreg & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+		}
+
+	/* Tristate and turnaround (2 bit times) */
+	bits[clk_idx++] = 0;
+	bits[clk_idx++] = 0;
+
+	/* Write out 16 bits of data, msb first */
+	mask = 0x8000;
+	for (i = 0; i < 16; ++i)
+		{
+		if (phydata & mask)
+			bits[clk_idx++] = MII_MDOE | MII_MDO;
+		else
+			bits[clk_idx++] = MII_MDOE;
+
+		/* Shift to next lowest bit */
+		mask >>= 1;
+		}
+
+	/* Final clock bit (tristate) */
+	bits[clk_idx++] = 0;
+
+	/* Save the current bank */
+	oldBank = SMC_inw( BANK_SELECT );
+
+	/* Select bank 3 */
+	SMC_SELECT_BANK( 3 );
+
+	/* Get the current MII register value */
+	mii_reg = SMC_inw( MII_REG );
+
+	/* Turn off all MII Interface bits */
+	mii_reg &= ~(MII_MDOE|MII_MCLK|MII_MDI|MII_MDO);
+
+	/* Clock all cycles */
+	for (i = 0; i < sizeof bits; ++i)
+		{
+		/* Clock Low - output data */
+		SMC_outw( mii_reg | bits[i], MII_REG );
+		udelay(SMC_PHY_CLOCK_DELAY);
+
+
+		/* Clock Hi - input data */
+		SMC_outw( mii_reg | bits[i] | MII_MCLK, MII_REG );
+		udelay(SMC_PHY_CLOCK_DELAY);
+		bits[i] |= SMC_inw( MII_REG ) & MII_MDI;
+		}
+
+	/* Return to idle state */
+	/* Set clock to low, data to low, and output tristated */
+	SMC_outw( mii_reg, MII_REG );
+	udelay(SMC_PHY_CLOCK_DELAY);
+
+	/* Restore original bank select */
+	SMC_SELECT_BANK( oldBank );
+
+#if (SMC_DEBUG > 2 )
+	printf("smc_write_phy_register(): phyaddr=%x,phyreg=%x,phydata=%x\n",
+		phyaddr, phyreg, phydata);
+	smc_dump_mii_stream(bits, sizeof bits);
+#endif
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+
+/*------------------------------------------------------------
+ . Waits the specified number of milliseconds - kernel friendly
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_wait_ms(unsigned int ms)
+{
+	udelay(ms*1000);
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+
+/*------------------------------------------------------------
+ . Configures the specified PHY using Autonegotiation. Calls
+ . smc_phy_fixed() if the user has requested a certain config.
+ .-------------------------------------------------------------*/
+#ifndef CONFIG_SMC91111_EXT_PHY
+static void smc_phy_configure()
+{
+	int timeout;
+	byte phyaddr;
+	word my_phy_caps; /* My PHY capabilities */
+	word my_ad_caps;  /* My Advertised capabilities */
+	word status = 0;  /*;my status = 0 */
+	int failed = 0;
+
+	PRINTK3("%s:smc_program_phy()\n", SMC_DEV_NAME);
+
+
+
+	/* Get the detected phy address */
+	phyaddr = SMC_PHY_ADDR;
+
+	/* Reset the PHY, setting all other bits to zero */
+	smc_write_phy_register(PHY_CNTL_REG, PHY_CNTL_RST);
+
+	/* Wait for the reset to complete, or time out */
+	timeout = 6; /* Wait up to 3 seconds */
+	while (timeout--)
+		{
+		if (!(smc_read_phy_register(PHY_CNTL_REG)
+		    & PHY_CNTL_RST))
+			{
+			/* reset complete */
+			break;
+			}
+
+		smc_wait_ms(500); /* wait 500 millisecs */
+		}
+
+	if (timeout < 1)
+		{
+		printf("%s:PHY reset timed out\n", SMC_DEV_NAME);
+		goto smc_phy_configure_exit;
+		}
+
+	/* Read PHY Register 18, Status Output */
+	/* lp->lastPhy18 = smc_read_phy_register(PHY_INT_REG); */
+
+	/* Enable PHY Interrupts (for register 18) */
+	/* Interrupts listed here are disabled */
+	smc_write_phy_register(PHY_INT_REG, 0xffff);
+
+	/* Configure the Receive/Phy Control register */
+	SMC_SELECT_BANK( 0 );
+	SMC_outw( RPC_DEFAULT, RPC_REG );
+
+	/* Copy our capabilities from PHY_STAT_REG to PHY_AD_REG */
+	my_phy_caps = smc_read_phy_register(PHY_STAT_REG);
+	my_ad_caps  = PHY_AD_CSMA; /* I am CSMA capable */
+
+	if (my_phy_caps & PHY_STAT_CAP_T4)
+		my_ad_caps |= PHY_AD_T4;
+
+	if (my_phy_caps & PHY_STAT_CAP_TXF)
+		my_ad_caps |= PHY_AD_TX_FDX;
+
+	if (my_phy_caps & PHY_STAT_CAP_TXH)
+		my_ad_caps |= PHY_AD_TX_HDX;
+
+	if (my_phy_caps & PHY_STAT_CAP_TF)
+		my_ad_caps |= PHY_AD_10_FDX;
+
+	if (my_phy_caps & PHY_STAT_CAP_TH)
+		my_ad_caps |= PHY_AD_10_HDX;
+
+	/* Update our Auto-Neg Advertisement Register */
+	smc_write_phy_register( PHY_AD_REG, my_ad_caps);
+
+	PRINTK2("%s:phy caps=%x\n", SMC_DEV_NAME, my_phy_caps);
+	PRINTK2("%s:phy advertised caps=%x\n", SMC_DEV_NAME, my_ad_caps);
+
+	/* Restart auto-negotiation process in order to advertise my caps */
+	smc_write_phy_register( PHY_CNTL_REG,
+		PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST );
+
+	/* Wait for the auto-negotiation to complete.  This may take from */
+	/* 2 to 3 seconds. */
+	/* Wait for the reset to complete, or time out */
+	timeout = 20; /* Wait up to 10 seconds */
+	while (timeout--)
+		{
+		status = smc_read_phy_register( PHY_STAT_REG);
+		if (status & PHY_STAT_ANEG_ACK)
+			{
+			/* auto-negotiate complete */
+			break;
+			}
+
+		smc_wait_ms(500); /* wait 500 millisecs */
+
+		/* Restart auto-negotiation if remote fault */
+		if (status & PHY_STAT_REM_FLT)
+			{
+			printf("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+
+			/* Restart auto-negotiation */
+			printf("%s:PHY restarting auto-negotiation\n",
+				SMC_DEV_NAME);
+			smc_write_phy_register( PHY_CNTL_REG,
+				PHY_CNTL_ANEG_EN | PHY_CNTL_ANEG_RST |
+				PHY_CNTL_SPEED | PHY_CNTL_DPLX);
+			}
+		}
+
+	if (timeout < 1)
+		{
+		printf("%s:PHY auto-negotiate timed out\n",
+			SMC_DEV_NAME);
+		printf("%s:PHY auto-negotiate timed out\n", SMC_DEV_NAME);
+		failed = 1;
+		}
+
+	/* Fail if we detected an auto-negotiate remote fault */
+	if (status & PHY_STAT_REM_FLT)
+		{
+		printf( "%s:PHY remote fault detected\n", SMC_DEV_NAME);
+		printf("%s:PHY remote fault detected\n", SMC_DEV_NAME);
+		failed = 1;
+		}
+
+	/* Re-Configure the Receive/Phy Control register */
+	SMC_outw( RPC_DEFAULT, RPC_REG );
+
+  smc_phy_configure_exit:
+
+}
+#endif /* !CONFIG_SMC91111_EXT_PHY */
+
+
+#if SMC_DEBUG > 2
+static void print_packet( byte * buf, int length )
+{
+#if 0
+        int i;
+        int remainder;
+        int lines;
+
+        printf("Packet of length %d \n", length );
+
+#if SMC_DEBUG > 3
+        lines = length / 16;
+        remainder = length % 16;
+
+        for ( i = 0; i < lines ; i ++ ) {
+                int cur;
+
+                for ( cur = 0; cur < 8; cur ++ ) {
+                        byte a, b;
+
+                        a = *(buf ++ );
+                        b = *(buf ++ );
+                        printf("%02x%02x ", a, b );
+                }
+                printf("\n");
+        }
+        for ( i = 0; i < remainder/2 ; i++ ) {
+                byte a, b;
+
+                a = *(buf ++ );
+                b = *(buf ++ );
+                printf("%02x%02x ", a, b );
+        }
+        printf("\n");
+#endif
+#endif
+}
+#endif
+
+int eth_init(bd_t *bd) {
+	smc_open();
+	return 0;
+}
+
+void eth_halt() {
+	smc_close();
+}
+
+int eth_rx() {
+	return smc_rcv();
+}
+
+int eth_send(volatile void *packet, int length) {
+	return smc_send_packet(packet, length);
+}
+
+#endif /* CONFIG_DRIVER_SMC91111 */
diff --git a/drivers/smc91111.h b/drivers/smc91111.h
new file mode 100644
index 00000000000..a372c2734d5
--- /dev/null
+++ b/drivers/smc91111.h
@@ -0,0 +1,619 @@
+/*------------------------------------------------------------------------
+ . smc91111.h - macros for the LAN91C111 Ethernet Driver
+ .
+ . (C) Copyright 2002
+ . Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ . Rolf Offermanns <rof@sysgo.de>
+ . Copyright (C) 2001 Standard Microsystems Corporation (SMSC)
+ .       Developed by Simple Network Magic Corporation (SNMC)
+ . Copyright (C) 1996 by Erik Stahlman (ES)
+ .
+ . This program is free software; you can redistribute it and/or modify
+ . it under the terms of the GNU General Public License as published by
+ . the Free Software Foundation; either version 2 of the License, or
+ . (at your option) any later version.
+ .
+ . This program is distributed in the hope that it will be useful,
+ . but WITHOUT ANY WARRANTY; without even the implied warranty of
+ . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ . GNU General Public License for more details.
+ .
+ . You should have received a copy of the GNU General Public License
+ . along with this program; if not, write to the Free Software
+ . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ .
+ . This file contains register information and access macros for
+ . the LAN91C111 single chip ethernet controller.  It is a modified
+ . version of the smc9194.h file.
+ .
+ . Information contained in this file was obtained from the LAN91C111
+ . manual from SMC.  To get a copy, if you really want one, you can find
+ . information under www.smsc.com.
+ .
+ . Authors
+ . 	Erik Stahlman				( erik@vt.edu )
+ .	Daris A Nevil				( dnevil@snmc.com )
+ .
+ . History
+ . 03/16/01		Daris A Nevil	Modified for use with LAN91C111 device
+ .
+ ---------------------------------------------------------------------------*/
+#ifndef _SMC91111_H_
+#define _SMC91111_H_
+
+#include <asm/types.h>
+#include <config.h>
+
+/*
+ * This function may be called by the board specific initialisation code
+ * in order to override the default mac address.
+ */
+
+void smc_set_mac_addr(const char *addr);
+
+
+/* I want some simple types */
+
+typedef unsigned char			byte;
+typedef unsigned short			word;
+typedef unsigned long int 		dword;
+
+/*
+ . DEBUGGING LEVELS
+ .
+ . 0 for normal operation
+ . 1 for slightly more details
+ . >2 for various levels of increasingly useless information
+ .    2 for interrupt tracking, status flags
+ .    3 for packet info
+ .    4 for complete packet dumps
+*/
+/*#define SMC_DEBUG 0 */
+
+/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */
+
+#define	SMC_IO_EXTENT	16
+
+#ifdef CONFIG_PXA250
+
+#define	SMC_inl(r) 	(*((volatile dword *)(SMC_BASE_ADDRESS+(r))))
+#define	SMC_inw(r) 	(*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define SMC_inb(p)	({ \
+	unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p)); \
+	unsigned int __v = *(volatile unsigned short *)((SMC_BASE_ADDRESS + __p) & ~1); \
+	if (__p & 1) __v >>= 8; \
+	else __v &= 0xff; \
+	__v; })
+
+#define	SMC_outl(d,r)	(*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d)
+#define	SMC_outw(d,r)	(*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define	SMC_outb(d,r)	({	word __d = (byte)(d);  \
+				word __w = SMC_inw((r)&~1);  \
+				__w &= ((r)&1) ? 0x00FF : 0xFF00;  \
+				__w |= ((r)&1) ? __d<<8 : __d;  \
+				SMC_outw(__w,(r)&~1);  \
+			})
+
+#define SMC_outsl(r,b,l)	({	int __i; \
+					dword *__b2; \
+					__b2 = (dword *) b; \
+					for (__i = 0; __i < l; __i++) { \
+					    SMC_outl( *(__b2 + __i), r); \
+					} \
+				})
+
+#define SMC_outsw(r,b,l)	({	int __i; \
+					word *__b2; \
+					__b2 = (word *) b; \
+					for (__i = 0; __i < l; __i++) { \
+					    SMC_outw( *(__b2 + __i), r); \
+					} \
+				})
+
+#define SMC_insl(r,b,l) 	({	int __i ;  \
+					dword *__b2;  \
+			    		__b2 = (dword *) b;  \
+			    		for (__i = 0; __i < l; __i++) {  \
+					  *(__b2 + __i) = SMC_inl(r);  \
+					  SMC_inl(0);  \
+					};  \
+				})
+
+#define SMC_insw(r,b,l) 	({	int __i ;  \
+					word *__b2;  \
+			    		__b2 = (word *) b;  \
+			    		for (__i = 0; __i < l; __i++) {  \
+					  *(__b2 + __i) = SMC_inw(r);  \
+					  SMC_inw(0);  \
+					};  \
+				})
+
+#define SMC_insb(r,b,l) 	({	int __i ;  \
+					byte *__b2;  \
+			    		__b2 = (byte *) b;  \
+			    		for (__i = 0; __i < l; __i++) {  \
+					  *(__b2 + __i) = SMC_inb(r);  \
+					  SMC_inb(0);  \
+					};  \
+				})
+
+#else /* if not CONFIG_PXA250 */
+
+/*
+ * We have only 16 Bit PCMCIA access on Socket 0
+ */
+
+#define	SMC_inw(r) 	(*((volatile word *)(SMC_BASE_ADDRESS+(r))))
+#define  SMC_inb(r)	(((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF)
+
+#define	SMC_outw(d,r)	(*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d)
+#define	SMC_outb(d,r)	({	word __d = (byte)(d);  \
+				word __w = SMC_inw((r)&~1);  \
+				__w &= ((r)&1) ? 0x00FF : 0xFF00;  \
+				__w |= ((r)&1) ? __d<<8 : __d;  \
+				SMC_outw(__w,(r)&~1);  \
+			})
+#if 0
+#define	SMC_outsw(r,b,l)	outsw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_outsw(r,b,l)	({	int __i; \
+					word *__b2; \
+					__b2 = (word *) b; \
+					for (__i = 0; __i < l; __i++) { \
+					    SMC_outw( *(__b2 + __i), r); \
+					} \
+				})
+#endif
+
+#if 0
+#define	SMC_insw(r,b,l) 	insw(SMC_BASE_ADDRESS+(r), (b), (l))
+#else
+#define SMC_insw(r,b,l) 	({	int __i ;  \
+					word *__b2;  \
+			    		__b2 = (word *) b;  \
+			    		for (__i = 0; __i < l; __i++) {  \
+					  *(__b2 + __i) = SMC_inw(r);  \
+					  SMC_inw(0);  \
+					};  \
+				})
+#endif
+
+#endif
+
+/*---------------------------------------------------------------
+ .
+ . A description of the SMSC registers is probably in order here,
+ . although for details, the SMC datasheet is invaluable.
+ .
+ . Basically, the chip has 4 banks of registers ( 0 to 3 ), which
+ . are accessed by writing a number into the BANK_SELECT register
+ . ( I also use a SMC_SELECT_BANK macro for this ).
+ .
+ . The banks are configured so that for most purposes, bank 2 is all
+ . that is needed for simple run time tasks.
+ -----------------------------------------------------------------------*/
+
+/*
+ . Bank Select Register:
+ .
+ .		yyyy yyyy 0000 00xx
+ .		xx 		= bank number
+ .		yyyy yyyy	= 0x33, for identification purposes.
+*/
+#define	BANK_SELECT		14
+
+/* Transmit Control Register */
+/* BANK 0  */
+#define	TCR_REG 	0x0000 	/* transmit control register */
+#define TCR_ENABLE	0x0001	/* When 1 we can transmit */
+#define TCR_LOOP	0x0002	/* Controls output pin LBK */
+#define TCR_FORCOL	0x0004	/* When 1 will force a collision */
+#define TCR_PAD_EN	0x0080	/* When 1 will pad tx frames < 64 bytes w/0 */
+#define TCR_NOCRC	0x0100	/* When 1 will not append CRC to tx frames */
+#define TCR_MON_CSN	0x0400	/* When 1 tx monitors carrier */
+#define TCR_FDUPLX    	0x0800  /* When 1 enables full duplex operation */
+#define TCR_STP_SQET	0x1000	/* When 1 stops tx if Signal Quality Error */
+#define	TCR_EPH_LOOP	0x2000	/* When 1 enables EPH block loopback */
+#define	TCR_SWFDUP	0x8000	/* When 1 enables Switched Full Duplex mode */
+
+#define	TCR_CLEAR	0	/* do NOTHING */
+/* the default settings for the TCR register : */
+/* QUESTION: do I want to enable padding of short packets ? */
+#define	TCR_DEFAULT  	TCR_ENABLE
+
+
+/* EPH Status Register */
+/* BANK 0  */
+#define EPH_STATUS_REG	0x0002
+#define ES_TX_SUC	0x0001	/* Last TX was successful */
+#define ES_SNGL_COL	0x0002	/* Single collision detected for last tx */
+#define ES_MUL_COL	0x0004	/* Multiple collisions detected for last tx */
+#define ES_LTX_MULT	0x0008	/* Last tx was a multicast */
+#define ES_16COL	0x0010	/* 16 Collisions Reached */
+#define ES_SQET		0x0020	/* Signal Quality Error Test */
+#define ES_LTXBRD	0x0040	/* Last tx was a broadcast */
+#define ES_TXDEFR	0x0080	/* Transmit Deferred */
+#define ES_LATCOL	0x0200	/* Late collision detected on last tx */
+#define ES_LOSTCARR	0x0400	/* Lost Carrier Sense */
+#define ES_EXC_DEF	0x0800	/* Excessive Deferral */
+#define ES_CTR_ROL	0x1000	/* Counter Roll Over indication */
+#define ES_LINK_OK	0x4000	/* Driven by inverted value of nLNK pin */
+#define ES_TXUNRN	0x8000	/* Tx Underrun */
+
+
+/* Receive Control Register */
+/* BANK 0  */
+#define	RCR_REG		0x0004
+#define	RCR_RX_ABORT	0x0001	/* Set if a rx frame was aborted */
+#define	RCR_PRMS	0x0002	/* Enable promiscuous mode */
+#define	RCR_ALMUL	0x0004	/* When set accepts all multicast frames */
+#define RCR_RXEN	0x0100	/* IFF this is set, we can receive packets */
+#define	RCR_STRIP_CRC	0x0200	/* When set strips CRC from rx packets */
+#define	RCR_ABORT_ENB	0x0200	/* When set will abort rx on collision */
+#define	RCR_FILT_CAR	0x0400	/* When set filters leading 12 bit s of carrier */
+#define RCR_SOFTRST	0x8000 	/* resets the chip */
+
+/* the normal settings for the RCR register : */
+#define	RCR_DEFAULT	(RCR_STRIP_CRC | RCR_RXEN)
+#define RCR_CLEAR	0x0	/* set it to a base state */
+
+/* Counter Register */
+/* BANK 0  */
+#define	COUNTER_REG	0x0006
+
+/* Memory Information Register */
+/* BANK 0  */
+#define	MIR_REG		0x0008
+
+/* Receive/Phy Control Register */
+/* BANK 0  */
+#define	RPC_REG		0x000A
+#define	RPC_SPEED	0x2000	/* When 1 PHY is in 100Mbps mode. */
+#define	RPC_DPLX	0x1000	/* When 1 PHY is in Full-Duplex Mode */
+#define	RPC_ANEG	0x0800	/* When 1 PHY is in Auto-Negotiate Mode */
+#define	RPC_LSXA_SHFT	5	/* Bits to shift LS2A,LS1A,LS0A to lsb */
+#define	RPC_LSXB_SHFT	2	/* Bits to get LS2B,LS1B,LS0B to lsb */
+#define RPC_LED_100_10	(0x00)	/* LED = 100Mbps OR's with 10Mbps link detect */
+#define RPC_LED_RES	(0x01)	/* LED = Reserved */
+#define RPC_LED_10	(0x02)	/* LED = 10Mbps link detect */
+#define RPC_LED_FD	(0x03)	/* LED = Full Duplex Mode */
+#define RPC_LED_TX_RX	(0x04)	/* LED = TX or RX packet occurred */
+#define RPC_LED_100	(0x05)	/* LED = 100Mbps link dectect */
+#define RPC_LED_TX	(0x06)	/* LED = TX packet occurred */
+#define RPC_LED_RX	(0x07)	/* LED = RX packet occurred */
+#define RPC_DEFAULT (RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
+
+/* Bank 0 0x000C is reserved */
+
+/* Bank Select Register */
+/* All Banks */
+#define BSR_REG	0x000E
+
+
+/* Configuration Reg */
+/* BANK 1 */
+#define CONFIG_REG	0x0000
+#define CONFIG_EXT_PHY	0x0200	/* 1=external MII, 0=internal Phy */
+#define CONFIG_GPCNTRL	0x0400	/* Inverse value drives pin nCNTRL */
+#define CONFIG_NO_WAIT	0x1000	/* When 1 no extra wait states on ISA bus */
+#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */
+
+/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */
+#define CONFIG_DEFAULT	(CONFIG_EPH_POWER_EN)
+
+
+/* Base Address Register */
+/* BANK 1 */
+#define	BASE_REG	0x0002
+
+
+/* Individual Address Registers */
+/* BANK 1 */
+#define	ADDR0_REG	0x0004
+#define	ADDR1_REG	0x0006
+#define	ADDR2_REG	0x0008
+
+
+/* General Purpose Register */
+/* BANK 1 */
+#define	GP_REG		0x000A
+
+
+/* Control Register */
+/* BANK 1 */
+#define	CTL_REG		0x000C
+#define CTL_RCV_BAD	0x4000 /* When 1 bad CRC packets are received */
+#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */
+#define	CTL_LE_ENABLE	0x0080 /* When 1 enables Link Error interrupt */
+#define	CTL_CR_ENABLE	0x0040 /* When 1 enables Counter Rollover interrupt */
+#define	CTL_TE_ENABLE	0x0020 /* When 1 enables Transmit Error interrupt */
+#define	CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */
+#define	CTL_RELOAD	0x0002 /* When set reads EEPROM into registers */
+#define	CTL_STORE	0x0001 /* When set stores registers into EEPROM */
+#define CTL_DEFAULT     (0x1210)
+
+/* MMU Command Register */
+/* BANK 2 */
+#define MMU_CMD_REG	0x0000
+#define MC_BUSY		1	/* When 1 the last release has not completed */
+#define MC_NOP		(0<<5)	/* No Op */
+#define	MC_ALLOC	(1<<5) 	/* OR with number of 256 byte packets */
+#define	MC_RESET	(2<<5)	/* Reset MMU to initial state */
+#define	MC_REMOVE	(3<<5) 	/* Remove the current rx packet */
+#define MC_RELEASE  	(4<<5) 	/* Remove and release the current rx packet */
+#define MC_FREEPKT  	(5<<5) 	/* Release packet in PNR register */
+#define MC_ENQUEUE	(6<<5)	/* Enqueue the packet for transmit */
+#define MC_RSTTXFIFO	(7<<5)	/* Reset the TX FIFOs */
+
+
+/* Packet Number Register */
+/* BANK 2 */
+#define	PN_REG		0x0002
+
+
+/* Allocation Result Register */
+/* BANK 2 */
+#define	AR_REG		0x0003
+#define AR_FAILED	0x80	/* Alocation Failed */
+
+
+/* RX FIFO Ports Register */
+/* BANK 2 */
+#define RXFIFO_REG	0x0004	/* Must be read as a word */
+#define RXFIFO_REMPTY	0x8000	/* RX FIFO Empty */
+
+
+/* TX FIFO Ports Register */
+/* BANK 2 */
+#define TXFIFO_REG	RXFIFO_REG	/* Must be read as a word */
+#define TXFIFO_TEMPTY	0x80	/* TX FIFO Empty */
+
+
+/* Pointer Register */
+/* BANK 2 */
+#define PTR_REG		0x0006
+#define	PTR_RCV		0x8000 /* 1=Receive area, 0=Transmit area */
+#define	PTR_AUTOINC 	0x4000 /* Auto increment the pointer on each access */
+#define PTR_READ	0x2000 /* When 1 the operation is a read */
+
+
+/* Data Register */
+/* BANK 2 */
+#define	SMC91111_DATA_REG	0x0008
+
+
+/* Interrupt Status/Acknowledge Register */
+/* BANK 2 */
+#define	SMC91111_INT_REG	0x000C
+
+
+/* Interrupt Mask Register */
+/* BANK 2 */
+#define IM_REG		0x000D
+#define	IM_MDINT	0x80 /* PHY MI Register 18 Interrupt */
+#define	IM_ERCV_INT	0x40 /* Early Receive Interrupt */
+#define	IM_EPH_INT	0x20 /* Set by Etheret Protocol Handler section */
+#define	IM_RX_OVRN_INT	0x10 /* Set by Receiver Overruns */
+#define	IM_ALLOC_INT	0x08 /* Set when allocation request is completed */
+#define	IM_TX_EMPTY_INT	0x04 /* Set if the TX FIFO goes empty */
+#define	IM_TX_INT	0x02 /* Transmit Interrrupt */
+#define IM_RCV_INT	0x01 /* Receive Interrupt */
+
+
+/* Multicast Table Registers */
+/* BANK 3 */
+#define	MCAST_REG1	0x0000
+#define	MCAST_REG2	0x0002
+#define	MCAST_REG3	0x0004
+#define	MCAST_REG4	0x0006
+
+
+/* Management Interface Register (MII) */
+/* BANK 3 */
+#define	MII_REG		0x0008
+#define MII_MSK_CRS100	0x4000 /* Disables CRS100 detection during tx half dup */
+#define MII_MDOE	0x0008 /* MII Output Enable */
+#define MII_MCLK	0x0004 /* MII Clock, pin MDCLK */
+#define MII_MDI		0x0002 /* MII Input, pin MDI */
+#define MII_MDO		0x0001 /* MII Output, pin MDO */
+
+
+/* Revision Register */
+/* BANK 3 */
+#define	REV_REG		0x000A /* ( hi: chip id   low: rev # ) */
+
+
+/* Early RCV Register */
+/* BANK 3 */
+/* this is NOT on SMC9192 */
+#define	ERCV_REG	0x000C
+#define ERCV_RCV_DISCRD	0x0080 /* When 1 discards a packet being received */
+#define ERCV_THRESHOLD	0x001F /* ERCV Threshold Mask */
+
+/* External Register */
+/* BANK 7 */
+#define	EXT_REG		0x0000
+
+
+#define CHIP_9192	3
+#define CHIP_9194	4
+#define CHIP_9195	5
+#define CHIP_9196	6
+#define CHIP_91100	7
+#define CHIP_91100FD	8
+#define CHIP_91111FD	9
+
+#if 0
+static const char * chip_ids[ 15 ] =  {
+	NULL, NULL, NULL,
+	/* 3 */ "SMC91C90/91C92",
+	/* 4 */ "SMC91C94",
+	/* 5 */ "SMC91C95",
+	/* 6 */ "SMC91C96",
+	/* 7 */ "SMC91C100",
+	/* 8 */ "SMC91C100FD",
+	/* 9 */ "SMC91C111",
+	NULL, NULL,
+	NULL, NULL, NULL};
+#endif
+
+/*
+ . Transmit status bits
+*/
+#define TS_SUCCESS 0x0001
+#define TS_LOSTCAR 0x0400
+#define TS_LATCOL  0x0200
+#define TS_16COL   0x0010
+
+/*
+ . Receive status bits
+*/
+#define RS_ALGNERR	0x8000
+#define RS_BRODCAST	0x4000
+#define RS_BADCRC	0x2000
+#define RS_ODDFRAME	0x1000	/* bug: the LAN91C111 never sets this on receive */
+#define RS_TOOLONG	0x0800
+#define RS_TOOSHORT	0x0400
+#define RS_MULTICAST	0x0001
+#define RS_ERRORS	(RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
+
+
+/* PHY Types */
+enum {
+	PHY_LAN83C183 = 1,	/* LAN91C111 Internal PHY */
+	PHY_LAN83C180
+};
+
+
+/* PHY Register Addresses (LAN91C111 Internal PHY) */
+
+/* PHY Control Register */
+#define PHY_CNTL_REG		0x00
+#define PHY_CNTL_RST		0x8000	/* 1=PHY Reset */
+#define PHY_CNTL_LPBK		0x4000	/* 1=PHY Loopback */
+#define PHY_CNTL_SPEED		0x2000	/* 1=100Mbps, 0=10Mpbs */
+#define PHY_CNTL_ANEG_EN	0x1000 /* 1=Enable Auto negotiation */
+#define PHY_CNTL_PDN		0x0800	/* 1=PHY Power Down mode */
+#define PHY_CNTL_MII_DIS	0x0400	/* 1=MII 4 bit interface disabled */
+#define PHY_CNTL_ANEG_RST	0x0200 /* 1=Reset Auto negotiate */
+#define PHY_CNTL_DPLX		0x0100	/* 1=Full Duplex, 0=Half Duplex */
+#define PHY_CNTL_COLTST		0x0080	/* 1= MII Colision Test */
+
+/* PHY Status Register */
+#define PHY_STAT_REG		0x01
+#define PHY_STAT_CAP_T4		0x8000	/* 1=100Base-T4 capable */
+#define PHY_STAT_CAP_TXF	0x4000	/* 1=100Base-X full duplex capable */
+#define PHY_STAT_CAP_TXH	0x2000	/* 1=100Base-X half duplex capable */
+#define PHY_STAT_CAP_TF		0x1000	/* 1=10Mbps full duplex capable */
+#define PHY_STAT_CAP_TH		0x0800	/* 1=10Mbps half duplex capable */
+#define PHY_STAT_CAP_SUPR	0x0040	/* 1=recv mgmt frames with not preamble */
+#define PHY_STAT_ANEG_ACK	0x0020	/* 1=ANEG has completed */
+#define PHY_STAT_REM_FLT	0x0010	/* 1=Remote Fault detected */
+#define PHY_STAT_CAP_ANEG	0x0008	/* 1=Auto negotiate capable */
+#define PHY_STAT_LINK		0x0004	/* 1=valid link */
+#define PHY_STAT_JAB		0x0002	/* 1=10Mbps jabber condition */
+#define PHY_STAT_EXREG		0x0001	/* 1=extended registers implemented */
+
+/* PHY Identifier Registers */
+#define PHY_ID1_REG		0x02	/* PHY Identifier 1 */
+#define PHY_ID2_REG		0x03	/* PHY Identifier 2 */
+
+/* PHY Auto-Negotiation Advertisement Register */
+#define PHY_AD_REG		0x04
+#define PHY_AD_NP		0x8000	/* 1=PHY requests exchange of Next Page */
+#define PHY_AD_ACK		0x4000	/* 1=got link code word from remote */
+#define PHY_AD_RF		0x2000	/* 1=advertise remote fault */
+#define PHY_AD_T4		0x0200	/* 1=PHY is capable of 100Base-T4 */
+#define PHY_AD_TX_FDX		0x0100	/* 1=PHY is capable of 100Base-TX FDPLX */
+#define PHY_AD_TX_HDX		0x0080	/* 1=PHY is capable of 100Base-TX HDPLX */
+#define PHY_AD_10_FDX		0x0040	/* 1=PHY is capable of 10Base-T FDPLX */
+#define PHY_AD_10_HDX		0x0020	/* 1=PHY is capable of 10Base-T HDPLX */
+#define PHY_AD_CSMA		0x0001	/* 1=PHY is capable of 802.3 CMSA */
+
+/* PHY Auto-negotiation Remote End Capability Register */
+#define PHY_RMT_REG		0x05
+/* Uses same bit definitions as PHY_AD_REG */
+
+/* PHY Configuration Register 1 */
+#define PHY_CFG1_REG		0x10
+#define PHY_CFG1_LNKDIS		0x8000	/* 1=Rx Link Detect Function disabled */
+#define PHY_CFG1_XMTDIS		0x4000	/* 1=TP Transmitter Disabled */
+#define PHY_CFG1_XMTPDN		0x2000	/* 1=TP Transmitter Powered Down */
+#define PHY_CFG1_BYPSCR		0x0400	/* 1=Bypass scrambler/descrambler */
+#define PHY_CFG1_UNSCDS		0x0200	/* 1=Unscramble Idle Reception Disable */
+#define PHY_CFG1_EQLZR		0x0100	/* 1=Rx Equalizer Disabled */
+#define PHY_CFG1_CABLE		0x0080	/* 1=STP(150ohm), 0=UTP(100ohm) */
+#define PHY_CFG1_RLVL0		0x0040	/* 1=Rx Squelch level reduced by 4.5db */
+#define PHY_CFG1_TLVL_SHIFT	2	/* Transmit Output Level Adjust */
+#define PHY_CFG1_TLVL_MASK	0x003C
+#define PHY_CFG1_TRF_MASK	0x0003	/* Transmitter Rise/Fall time */
+
+
+/* PHY Configuration Register 2 */
+#define PHY_CFG2_REG		0x11
+#define PHY_CFG2_APOLDIS	0x0020	/* 1=Auto Polarity Correction disabled */
+#define PHY_CFG2_JABDIS		0x0010	/* 1=Jabber disabled */
+#define PHY_CFG2_MREG		0x0008	/* 1=Multiple register access (MII mgt) */
+#define PHY_CFG2_INTMDIO	0x0004	/* 1=Interrupt signaled with MDIO pulseo */
+
+/* PHY Status Output (and Interrupt status) Register */
+#define PHY_INT_REG		0x12	/* Status Output (Interrupt Status) */
+#define PHY_INT_INT		0x8000	/* 1=bits have changed since last read */
+#define	PHY_INT_LNKFAIL		0x4000	/* 1=Link Not detected */
+#define PHY_INT_LOSSSYNC	0x2000	/* 1=Descrambler has lost sync */
+#define PHY_INT_CWRD		0x1000	/* 1=Invalid 4B5B code detected on rx */
+#define PHY_INT_SSD		0x0800	/* 1=No Start Of Stream detected on rx */
+#define PHY_INT_ESD		0x0400	/* 1=No End Of Stream detected on rx */
+#define PHY_INT_RPOL		0x0200	/* 1=Reverse Polarity detected */
+#define PHY_INT_JAB		0x0100	/* 1=Jabber detected */
+#define PHY_INT_SPDDET		0x0080	/* 1=100Base-TX mode, 0=10Base-T mode */
+#define PHY_INT_DPLXDET		0x0040	/* 1=Device in Full Duplex */
+
+/* PHY Interrupt/Status Mask Register */
+#define PHY_MASK_REG		0x13	/* Interrupt Mask */
+/* Uses the same bit definitions as PHY_INT_REG */
+
+
+
+/*-------------------------------------------------------------------------
+ .  I define some macros to make it easier to do somewhat common
+ . or slightly complicated, repeated tasks.
+ --------------------------------------------------------------------------*/
+
+/* select a register bank, 0 to 3  */
+
+#define SMC_SELECT_BANK(x)  { SMC_outw( x, BANK_SELECT ); }
+
+/* this enables an interrupt in the interrupt mask register */
+#define SMC_ENABLE_INT(x) {\
+		unsigned char mask;\
+		SMC_SELECT_BANK(2);\
+		mask = SMC_inb( IM_REG );\
+		mask |= (x);\
+		SMC_outb( mask, IM_REG ); \
+}
+
+/* this disables an interrupt from the interrupt mask register */
+
+#define SMC_DISABLE_INT(x) {\
+		unsigned char mask;\
+		SMC_SELECT_BANK(2);\
+		mask = SMC_inb( IM_REG );\
+		mask &= ~(x);\
+		SMC_outb( mask, IM_REG ); \
+}
+
+/*----------------------------------------------------------------------
+ . Define the interrupts that I want to receive from the card
+ .
+ . I want:
+ .  IM_EPH_INT, for nasty errors
+ .  IM_RCV_INT, for happy received packets
+ .  IM_RX_OVRN_INT, because I have to kick the receiver
+ .  IM_MDINT, for PHY Register 18 Status Changes
+ --------------------------------------------------------------------------*/
+#define SMC_INTERRUPT_MASK   (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \
+	IM_MDINT)
+
+#endif  /* _SMC_91111_H_ */
+
diff --git a/fs/jffs2/compr_rtime.c b/fs/jffs2/compr_rtime.c
new file mode 100644
index 00000000000..9bb4f1bcb63
--- /dev/null
+++ b/fs/jffs2/compr_rtime.c
@@ -0,0 +1,91 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright (C) 2001 Red Hat, Inc.
+ *
+ * Created by Arjan van de Ven <arjanv@redhat.com>
+ *
+ * The original JFFS, from which the design for JFFS2 was derived,
+ * was designed and implemented by Axis Communications AB.
+ *
+ * The contents of this file are subject to the Red Hat eCos Public
+ * License Version 1.1 (the "Licence"); you may not use this file
+ * except in compliance with the Licence.  You may obtain a copy of
+ * the Licence at http://www.redhat.com/
+ *
+ * Software distributed under the Licence is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
+ * See the Licence for the specific language governing rights and
+ * limitations under the Licence.
+ *
+ * The Original Code is JFFS2 - Journalling Flash File System, version 2
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the RHEPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the RHEPL or the GPL.
+ *
+ * $Id: compr_rtime.c,v 1.2 2002/01/24 22:58:42 rfeany Exp $
+ *
+ *
+ * Very simple lz77-ish encoder.
+ *
+ * Theory of operation: Both encoder and decoder have a list of "last
+ * occurances" for every possible source-value; after sending the
+ * first source-byte, the second byte indicated the "run" length of
+ * matches
+ *
+ * The algorithm is intended to only send "whole bytes", no bit-messing.
+ *
+ */
+
+#include <config.h>
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+
+#include <jffs2/jffs2.h>
+
+void rtime_decompress(unsigned char *data_in, unsigned char *cpage_out,
+		      u32 srclen, u32 destlen)
+{
+	int positions[256];
+	int outpos;
+	int pos;
+	int i;
+
+	outpos = pos = 0;
+
+	for (i = 0; i < 256; positions[i++] = 0);
+
+	while (outpos<destlen) {
+		unsigned char value;
+		int backoffs;
+		int repeat;
+
+		value = data_in[pos++];
+		cpage_out[outpos++] = value; /* first the verbatim copied byte */
+		repeat = data_in[pos++];
+		backoffs = positions[value];
+
+		positions[value]=outpos;
+		if (repeat) {
+			if (backoffs + repeat >= outpos) {
+				while(repeat) {
+					cpage_out[outpos++] = cpage_out[backoffs++];
+					repeat--;
+				}
+			} else {
+				for (i = 0; i < repeat; i++)
+					*(cpage_out + outpos + i) = *(cpage_out + backoffs + i);
+				outpos+=repeat;
+			}
+		}
+	}
+}
+
+#endif /* CFG_CMD_JFFS2 */
diff --git a/fs/jffs2/compr_rubin.c b/fs/jffs2/compr_rubin.c
new file mode 100644
index 00000000000..cf01f888a47
--- /dev/null
+++ b/fs/jffs2/compr_rubin.c
@@ -0,0 +1,124 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright (C) 2001 Red Hat, Inc.
+ *
+ * Created by Arjan van de Ven <arjanv@redhat.com>
+ *
+ * Heavily modified by Russ Dill <Russ.Dill@asu.edu> in an attempt at
+ * a little more speed.
+ *
+ * The original JFFS, from which the design for JFFS2 was derived,
+ * was designed and implemented by Axis Communications AB.
+ *
+ * The contents of this file are subject to the Red Hat eCos Public
+ * License Version 1.1 (the "Licence"); you may not use this file
+ * except in compliance with the Licence.  You may obtain a copy of
+ * the Licence at http://www.redhat.com/
+ *
+ * Software distributed under the Licence is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
+ * See the Licence for the specific language governing rights and
+ * limitations under the Licence.
+ *
+ * The Original Code is JFFS2 - Journalling Flash File System, version 2
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the RHEPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the RHEPL or the GPL.
+ *
+ * $Id: compr_rubin.c,v 1.2 2002/01/24 22:58:42 rfeany Exp $
+ *
+ */
+
+#include <config.h>
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+
+#include <jffs2/jffs2.h>
+#include <jffs2/compr_rubin.h>
+
+
+void rubin_do_decompress(unsigned char *bits, unsigned char *in,
+			 unsigned char *page_out, __u32 destlen)
+{
+	register char *curr = page_out;
+	char *end = page_out + destlen;
+	register unsigned long temp;
+	register unsigned long result;
+	register unsigned long p;
+	register unsigned long q;
+	register unsigned long rec_q;
+	register unsigned long bit;
+	register long i0;
+	unsigned long i;
+
+	/* init_pushpull */
+	temp = *(u32 *) in;
+	bit = 16;
+
+	/* init_rubin */
+	q = 0;
+	p = (long) (2 * UPPER_BIT_RUBIN);
+
+	/* init_decode */
+	rec_q = (in[0] << 8) | in[1];
+
+	while (curr < end) {
+		/* in byte */
+
+		result = 0;
+		for (i = 0; i < 8; i++) {
+			/* decode */
+
+			while ((q & UPPER_BIT_RUBIN) || ((p + q) <= UPPER_BIT_RUBIN)) {
+				q &= ~UPPER_BIT_RUBIN;
+				q <<= 1;
+				p <<= 1;
+				rec_q &= ~UPPER_BIT_RUBIN;
+				rec_q <<= 1;
+				rec_q |= (temp >> (bit++ ^ 7)) & 1;
+				if (bit > 31) {
+					bit = 0;
+					temp = *(++((u32 *) in));
+				}
+			}
+			i0 =  (bits[i] * p) >> 8;
+
+			if (i0 <= 0) i0 = 1;
+			/* if it fails, it fails, we have our crc
+			if (i0 >= p) i0 = p - 1; */
+
+			result >>= 1;
+			if (rec_q < q + i0) {
+				/* result |= 0x00; */
+				p = i0;
+			} else {
+				result |= 0x80;
+				p -= i0;
+				q += i0;
+			}
+		}
+		*(curr++) = result;
+	}
+}
+
+void dynrubin_decompress(unsigned char *data_in, unsigned char *cpage_out,
+		   unsigned long sourcelen, unsigned long dstlen)
+{
+	unsigned char bits[8];
+	int c;
+
+	for (c=0; c<8; c++)
+		bits[c] = (256 - data_in[c]);
+
+	rubin_do_decompress(bits, data_in+8, cpage_out, dstlen);
+}
+
+#endif /* CFG_CMD_JFFS2 */
diff --git a/fs/jffs2/compr_zlib.c b/fs/jffs2/compr_zlib.c
new file mode 100644
index 00000000000..1b35585eee5
--- /dev/null
+++ b/fs/jffs2/compr_zlib.c
@@ -0,0 +1,52 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright (C) 2001 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@cambridge.redhat.com>
+ *
+ * The original JFFS, from which the design for JFFS2 was derived,
+ * was designed and implemented by Axis Communications AB.
+ *
+ * The contents of this file are subject to the Red Hat eCos Public
+ * License Version 1.1 (the "Licence"); you may not use this file
+ * except in compliance with the Licence.  You may obtain a copy of
+ * the Licence at http://www.redhat.com/
+ *
+ * Software distributed under the Licence is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
+ * See the Licence for the specific language governing rights and
+ * limitations under the Licence.
+ *
+ * The Original Code is JFFS2 - Journalling Flash File System, version 2
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the RHEPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the RHEPL or the GPL.
+ *
+ * $Id: compr_zlib.c,v 1.2 2002/01/24 22:58:42 rfeany Exp $
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+
+#include <jffs2/jffs2.h>
+#include <jffs2/mini_inflate.h>
+
+long zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
+		      __u32 srclen, __u32 destlen)
+{
+    return (decompress_block(cpage_out, data_in + 2, ldr_memcpy));
+
+}
+
+#endif /* CFG_CMD_JFFS2 */
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
new file mode 100644
index 00000000000..bacec8e30cd
--- /dev/null
+++ b/fs/jffs2/jffs2_1pass.c
@@ -0,0 +1,995 @@
+/*
+-------------------------------------------------------------------------
+ * Filename:      jffs2.c
+ * Version:       $Id: jffs2_1pass.c,v 1.7 2002/01/25 01:56:47 nyet Exp $
+ * Copyright:     Copyright (C) 2001, Russ Dill
+ * Author:        Russ Dill <Russ.Dill@asu.edu>
+ * Description:   Module to load kernel from jffs2
+ *-----------------------------------------------------------------------*/
+/*
+ * some portions of this code are taken from jffs2, and as such, the
+ * following copyright notice is included.
+ *
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright (C) 2001 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@cambridge.redhat.com>
+ *
+ * The original JFFS, from which the design for JFFS2 was derived,
+ * was designed and implemented by Axis Communications AB.
+ *
+ * The contents of this file are subject to the Red Hat eCos Public
+ * License Version 1.1 (the "Licence"); you may not use this file
+ * except in compliance with the Licence.  You may obtain a copy of
+ * the Licence at http://www.redhat.com/
+ *
+ * Software distributed under the Licence is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
+ * See the Licence for the specific language governing rights and
+ * limitations under the Licence.
+ *
+ * The Original Code is JFFS2 - Journalling Flash File System, version 2
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the RHEPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the RHEPL or the GPL.
+ *
+ * $Id: jffs2_1pass.c,v 1.7 2002/01/25 01:56:47 nyet Exp $
+ *
+ */
+
+/* Ok, so anyone who knows the jffs2 code will probably want to get a papar
+ * bag to throw up into before reading this code. I looked through the jffs2
+ * code, the caching scheme is very elegant. I tried to keep the version
+ * for a bootloader as small and simple as possible. Instead of worring about
+ * unneccesary data copies, node scans, etc, I just optimized for the known
+ * common case, a kernel, which looks like:
+ * 	(1) most pages are 4096 bytes
+ *	(2) version numbers are somewhat sorted in acsending order
+ *	(3) multiple compressed blocks making up one page is uncommon
+ *
+ * So I create a linked list of decending version numbers (insertions at the
+ * head), and then for each page, walk down the list, until a matching page
+ * with 4096 bytes is found, and then decompress the watching pages in
+ * reverse order.
+ *
+ */
+
+/*
+ * Adapted by Nye Liu <nyet@zumanetworks.com> and
+ * Rex Feany <rfeany@zumanetworks.com>
+ * on Jan/2002 for U-Boot.
+ *
+ * Clipped out all the non-1pass functions, cleaned up warnings,
+ * wrappers, etc. No major changes to the code.
+ * Please, he really means it when he said have a paper bag
+ * handy. We needed it ;).
+ *
+ */
+
+#include <common.h>
+#include <config.h>
+#include <malloc.h>
+#include <linux/stat.h>
+#include <linux/time.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+
+#include <jffs2/jffs2.h>
+#include <jffs2/jffs2_1pass.h>
+
+#include "jffs2_private.h"
+
+/* Compression names */
+static char *compr_names[] = {
+        "NONE",
+        "ZERO",
+        "RTIME",
+        "RUBINMIPS",
+        "COPY",
+        "DYNRUBIN",
+        "ZLIB" };
+
+static char spinner[] = { '|', '\\', '-', '/' };
+
+#define DEBUG
+#ifdef  DEBUG
+# define DEBUGF(fmt,args...)	printf(fmt ,##args)
+#else
+# define DEBUGF(fmt,args...)
+#endif
+
+#define MALLOC_CHUNK (10*1024)
+
+
+static struct b_node *
+add_node(struct b_node *tail, u32 * count, u32 * memBase)
+{
+	u32 index;
+	u32 memLimit;
+	struct b_node *b;
+
+	index = (*count) * sizeof(struct b_node) % MALLOC_CHUNK;
+	memLimit = MALLOC_CHUNK;
+
+#if 0
+	putLabeledWord("add_node: index = ", index);
+	putLabeledWord("add_node: memLimit = ", memLimit);
+	putLabeledWord("add_node: memBase = ", *memBase);
+#endif
+
+	/* we need not keep a list of bases since we'll never free the */
+	/* memory, just jump the the kernel */
+	if ((index == 0) || (index > memLimit)) {	/* we need mode space before we continue */
+		if ((*memBase = (u32) mmalloc(MALLOC_CHUNK)) == (u32) NULL) {
+			putstr("add_node: malloc failed\n");
+			return NULL;
+		}
+#if 0
+		putLabeledWord("add_node: alloced a new membase at ", *memBase);
+#endif
+
+	}
+	/* now we have room to add it. */
+	b = (struct b_node *) (*memBase + index);
+
+	/* null on first call */
+	if (tail)
+		tail->next = b;
+
+#if 0
+	putLabeledWord("add_node: tail = ", (u32) tail);
+	if (tail)
+		putLabeledWord("add_node: tail->next = ", (u32) tail->next);
+
+#endif
+
+#if 0
+	putLabeledWord("add_node: mb+i = ", (u32) (*memBase + index));
+	putLabeledWord("add_node: b = ", (u32) b);
+#endif
+	(*count)++;
+	b->next = (struct b_node *) NULL;
+	return b;
+
+}
+
+/* we know we have empties at the start offset so we will hop */
+/* t points that would be non F if there were a node here to speed this up. */
+struct jffs2_empty_node {
+	u32 first;
+	u32 second;
+};
+
+static u32
+jffs2_scan_empty(u32 start_offset, struct part_info *part)
+{
+	u32 max = part->size - sizeof(struct jffs2_raw_inode);
+
+	/* this would be either dir node_crc or frag isize */
+	u32 offset = start_offset + 32;
+	struct jffs2_empty_node *node;
+
+	start_offset += 4;
+	while (offset < max) {
+		node = (struct jffs2_empty_node *) (part->offset + offset);
+		if ((node->first == 0xFFFFFFFF) && (node->second == 0xFFFFFFFF)) {
+			/* we presume that there were no nodes in between and advance in a hop */
+			/* putLabeledWord("\t\tjffs2_scan_empty: empty at offset=",offset); */
+			start_offset = offset + 4;
+			offset = start_offset + 32;	/* orig 32 + 4 bytes for the second==0xfffff */
+		} else {
+			return start_offset;
+		}
+	}
+	return start_offset;
+}
+
+static u32
+jffs_init_1pass_list(struct part_info *part)
+{
+	if ( 0 != ( part->jffs2_priv=malloc(sizeof(struct b_lists)))){
+		struct b_lists *pL =(struct b_lists *)part->jffs2_priv;
+
+		pL->dirListHead = pL->dirListTail = NULL;
+		pL->fragListHead = pL->fragListTail = NULL;
+		pL->dirListCount = 0;
+		pL->dirListMemBase = 0;
+		pL->fragListCount = 0;
+		pL->fragListMemBase = 0;
+		pL->partOffset = 0x0;
+	}
+	return 0;
+}
+
+/* find the inode from the slashless name given a parent */
+static long
+jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
+{
+	struct b_node *b;
+	struct jffs2_raw_inode *jNode;
+	u32 totalSize = 1;
+	u32 oldTotalSize = 0;
+	u32 size = 0;
+	char *lDest = (char *) dest;
+	char *src;
+	long ret;
+	int i;
+	u32 counter = 0;
+	char totalSizeSet = 0;
+
+#if 0
+	b = pL->fragListHead;
+	while (b) {
+		jNode = (struct jffs2_raw_inode *) (b->offset);
+		if ((inode == jNode->ino)) {
+			putLabeledWord("\r\n\r\nread_inode: totlen = ", jNode->totlen);
+			putLabeledWord("read_inode: inode = ", jNode->ino);
+			putLabeledWord("read_inode: version = ", jNode->version);
+			putLabeledWord("read_inode: isize = ", jNode->isize);
+			putLabeledWord("read_inode: offset = ", jNode->offset);
+			putLabeledWord("read_inode: csize = ", jNode->csize);
+			putLabeledWord("read_inode: dsize = ", jNode->dsize);
+			putLabeledWord("read_inode: compr = ", jNode->compr);
+			putLabeledWord("read_inode: usercompr = ", jNode->usercompr);
+			putLabeledWord("read_inode: flags = ", jNode->flags);
+		}
+
+		b = b->next;
+	}
+
+#endif
+
+#if 1
+	b = pL->fragListHead;
+	while (b && (size < totalSize)) {
+		jNode = (struct jffs2_raw_inode *) (b->offset);
+		if ((inode == jNode->ino)) {
+			if ((jNode->isize == oldTotalSize) && (jNode->isize > totalSize)) {
+				/* 2 consecutive isizes indicate file length */
+				totalSize = jNode->isize;
+				totalSizeSet = 1;
+			} else if (!totalSizeSet) {
+				totalSize = size + jNode->dsize + 1;
+			}
+			oldTotalSize = jNode->isize;
+
+			if(dest) {
+				src = ((char *) jNode) + sizeof(struct jffs2_raw_inode);
+				/* lDest = (char *) (dest + (jNode->offset & ~3)); */
+				lDest = (char *) (dest + jNode->offset);
+#if 0
+				putLabeledWord("\r\n\r\nread_inode: src = ", src);
+				putLabeledWord("read_inode: dest = ", lDest);
+				putLabeledWord("read_inode: dsize = ", jNode->dsize);
+				putLabeledWord("read_inode: csize = ", jNode->csize);
+				putLabeledWord("read_inode: version = ", jNode->version);
+				putLabeledWord("read_inode: isize = ", jNode->isize);
+				putLabeledWord("read_inode: offset = ", jNode->offset);
+				putLabeledWord("read_inode: compr = ", jNode->compr);
+				putLabeledWord("read_inode: flags = ", jNode->flags);
+#endif
+				switch (jNode->compr) {
+				case JFFS2_COMPR_NONE:
+#if 0
+					{
+						int i;
+
+						if ((dest > 0xc0092ff0) && (dest < 0xc0093000))
+							for (i = 0; i < first->length; i++) {
+								putLabeledWord("\tCOMPR_NONE: src =", src + i);
+								putLabeledWord("\tCOMPR_NONE: length =", first->length);
+								putLabeledWord("\tCOMPR_NONE: dest =", dest + i);
+								putLabeledWord("\tCOMPR_NONE: data =", (unsigned char) *(src + i));
+							}
+					}
+#endif
+
+					ret = (unsigned long) ldr_memcpy(lDest, src, jNode->dsize);
+					break;
+				case JFFS2_COMPR_ZERO:
+					ret = 0;
+					for (i = 0; i < jNode->dsize; i++)
+						*(lDest++) = 0;
+					break;
+				case JFFS2_COMPR_RTIME:
+					ret = 0;
+					rtime_decompress(src, lDest, jNode->csize, jNode->dsize);
+					break;
+				case JFFS2_COMPR_DYNRUBIN:
+					/* this is slow but it works */
+					ret = 0;
+					dynrubin_decompress(src, lDest, jNode->csize, jNode->dsize);
+					break;
+				case JFFS2_COMPR_ZLIB:
+					ret = zlib_decompress(src, lDest, jNode->csize, jNode->dsize);
+					break;
+				default:
+					/* unknown */
+					putLabeledWord("UNKOWN COMPRESSION METHOD = ", jNode->compr);
+					return -1;
+					break;
+				}
+			}
+
+			size += jNode->dsize;
+#if 0
+			putLabeledWord("read_inode: size = ", size);
+			putLabeledWord("read_inode: totalSize = ", totalSize);
+			putLabeledWord("read_inode: compr ret = ", ret);
+#endif
+		}
+		b = b->next;
+		counter++;
+	}
+#endif
+
+#if 0
+	putLabeledWord("read_inode: returning = ", size);
+#endif
+	return size;
+}
+
+/* find the inode from the slashless name given a parent */
+static u32
+jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
+{
+	struct b_node *b;
+	struct jffs2_raw_dirent *jDir;
+	int len;
+	u32 counter;
+	u32 version = 0;
+	u32 inode = 0;
+
+	/* name is assumed slash free */
+	len = strlen(name);
+
+	counter = 0;
+	/* we need to search all and return the inode with the highest version */
+	for(b = pL->dirListHead;b;b=b->next,counter++) {
+		jDir = (struct jffs2_raw_dirent *) (b->offset);
+		if ((pino == jDir->pino) && (len == jDir->nsize) && (jDir->ino) &&	/* 0 for unlink */
+		    (!strncmp(jDir->name, name, len))) {	/* a match */
+			if (jDir->version < version) continue;
+
+		        if(jDir->version==0) {
+			    	/* Is this legal? */
+				putstr(" ** WARNING ** ");
+				putnstr(jDir->name, jDir->nsize);
+				putstr(" is version 0 (in find, ignoring)\r\n");
+			} else if(jDir->version==version) {
+			    	/* Im pretty sure this isn't ... */
+				putstr(" ** ERROR ** ");
+				putnstr(jDir->name, jDir->nsize);
+				putLabeledWord(" has dup version =", version);
+			}
+			inode = jDir->ino;
+			version = jDir->version;
+		}
+#if 0
+		putstr("\r\nfind_inode:p&l ->");
+		putnstr(jDir->name, jDir->nsize);
+		putstr("\r\n");
+		putLabeledWord("pino = ", jDir->pino);
+		putLabeledWord("nsize = ", jDir->nsize);
+		putLabeledWord("b = ", (u32) b);
+		putLabeledWord("counter = ", counter);
+#endif
+	}
+	return inode;
+}
+
+static char *mkmodestr(unsigned long mode, char *str)
+{
+    static const char *l="xwr";
+    int mask=1, i;
+    char c;
+
+    switch (mode & S_IFMT) {
+        case S_IFDIR:    str[0]='d'; break;
+        case S_IFBLK:    str[0]='b'; break;
+        case S_IFCHR:    str[0]='c'; break;
+        case S_IFIFO:    str[0]='f'; break;
+        case S_IFLNK:    str[0]='l'; break;
+        case S_IFSOCK:   str[0]='s'; break;
+        case S_IFREG:    str[0]='-'; break;
+        default:        str[0]='?';
+    }
+
+    for(i=0;i<9;i++) {
+        c=l[i%3];
+        str[9-i]=(mode & mask)?c:'-';
+        mask=mask<<1;
+    }
+
+    if(mode & S_ISUID) str[3]=(mode & S_IXUSR)?'s':'S';
+    if(mode & S_ISGID) str[6]=(mode & S_IXGRP)?'s':'S';
+    if(mode & S_ISVTX) str[9]=(mode & S_IXOTH)?'t':'T';
+    str[10]='\0';
+    return str;
+}
+
+static inline void dump_stat(struct stat *st, const char *name)
+{
+    char str[20];
+    char s[64], *p;
+
+    if (st->st_mtime == (time_t)(-1))	/* some ctimes really hate -1 */
+        st->st_mtime = 1;
+
+    ctime_r(&st->st_mtime, s/*, 64*/);   /* newlib ctime doesn't have buflen */
+
+    if((p=strchr(s,'\n'))!=NULL) *p='\0';
+    if((p=strchr(s,'\r'))!=NULL) *p='\0';
+
+/*
+    printf("%6lo %s %8ld %s %s\n", st->st_mode, mkmodestr(st->st_mode, str),
+        st->st_size, s, name);
+*/
+
+    printf(" %s %8ld %s %s", mkmodestr(st->st_mode,str), st->st_size, s, name);
+}
+
+static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, struct jffs2_raw_inode *i)
+{
+	char fname[256];
+	struct stat st;
+
+	if(!d || !i) return -1;
+
+	strncpy(fname, d->name, d->nsize);
+	fname[d->nsize]='\0';
+
+	memset(&st,0,sizeof(st));
+
+	st.st_mtime=i->mtime;
+	st.st_mode=i->mode;
+	st.st_ino=i->ino;
+
+	/* neither dsize nor isize help us.. do it the long way */
+	st.st_size=jffs2_1pass_read_inode(pL, i->ino, NULL);
+
+	dump_stat(&st, fname);
+
+	if (d->type == DT_LNK) {
+		unsigned char *src = (unsigned char *) (&i[1]);
+	        putstr(" -> ");
+		putnstr(src, (int)i->dsize);
+	}
+
+	putstr("\r\n");
+
+	return 0;
+}
+
+/* list inodes with the given pino */
+static u32
+jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
+{
+	struct b_node *b;
+	struct jffs2_raw_dirent *jDir;
+
+	for(b = pL->dirListHead;b;b=b->next) {
+		jDir = (struct jffs2_raw_dirent *) (b->offset);
+		if ((pino == jDir->pino) && (jDir->ino)) {	/* 0 inode for unlink */
+			u32 i_version=0;
+			struct jffs2_raw_inode *jNode, *i=NULL;
+			struct b_node *b2 = pL->fragListHead;
+
+			while (b2) {
+				jNode = (struct jffs2_raw_inode *) (b2->offset);
+				if (jNode->ino == jDir->ino
+				    && jNode->version>=i_version)
+					i=jNode;
+				b2 = b2->next;
+			}
+
+			dump_inode(pL, jDir, i);
+		}
+	}
+	return pino;
+}
+
+static u32
+jffs2_1pass_search_inode(struct b_lists * pL, const char *fname, u32 pino)
+{
+	int i;
+	char tmp[256];
+	char working_tmp[256];
+	char *c;
+
+	/* discard any leading slash */
+	i = 0;
+	while (fname[i] == '/')
+		i++;
+	strcpy(tmp, &fname[i]);
+
+	while ((c = (char *) strchr(tmp, '/')))	/* we are still dired searching */
+	{
+		strncpy(working_tmp, tmp, c - tmp);
+		working_tmp[c - tmp] = '\0';
+#if 0
+		putstr("search_inode: tmp = ");
+		putstr(tmp);
+		putstr("\r\n");
+		putstr("search_inode: wtmp = ");
+		putstr(working_tmp);
+		putstr("\r\n");
+		putstr("search_inode: c = ");
+		putstr(c);
+		putstr("\r\n");
+#endif
+		for (i = 0; i < strlen(c) - 1; i++)
+			tmp[i] = c[i + 1];
+		tmp[i] = '\0';
+#if 0
+		putstr("search_inode: post tmp = ");
+		putstr(tmp);
+		putstr("\r\n");
+#endif
+
+		if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino))) {
+			putstr("find_inode failed for name=");
+			putstr(working_tmp);
+			putstr("\r\n");
+			return 0;
+		}
+	}
+	/* this is for the bare filename, directories have already been mapped */
+	if (!(pino = jffs2_1pass_find_inode(pL, tmp, pino))) {
+		putstr("find_inode failed for name=");
+		putstr(tmp);
+		putstr("\r\n");
+		return 0;
+	}
+	return pino;
+
+}
+
+static u32
+jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
+{
+	struct b_node *b;
+	struct b_node *b2;
+	struct jffs2_raw_dirent *jDir;
+	struct jffs2_raw_inode *jNode;
+	struct jffs2_raw_dirent *jDirFound = NULL;
+	char tmp[256];
+	u32 version = 0;
+	u32 pino;
+	unsigned char *src;
+
+	/* we need to search all and return the inode with the highest version */
+	for(b = pL->dirListHead; b; b=b->next) {
+		jDir = (struct jffs2_raw_dirent *) (b->offset);
+		if (ino == jDir->ino) {
+		    	if(jDir->version < version) continue;
+
+			if(jDir->version == 0) {
+			    	/* Is this legal? */
+				putstr(" ** WARNING ** ");
+				putnstr(jDir->name, jDir->nsize);
+				putstr(" is version 0 (in resolve, ignoring)\r\n");
+			} else if(jDir->version == version) {
+			    	/* Im pretty sure this isn't ... */
+				putstr(" ** ERROR ** ");
+				putnstr(jDir->name, jDir->nsize);
+				putLabeledWord(" has dup version (resolve) = ",
+					version);
+			}
+
+			jDirFound = jDir;
+			version = jDir->version;
+		}
+	}
+	/* now we found the right entry again. (shoulda returned inode*) */
+	if (jDirFound->type != DT_LNK)
+		return jDirFound->ino;
+	/* so its a soft link so we follow it again. */
+	b2 = pL->fragListHead;
+	while (b2) {
+		jNode = (struct jffs2_raw_inode *) (b2->offset);
+		if (jNode->ino == jDirFound->ino) {
+			src = (unsigned char *) (b2->offset + sizeof(struct jffs2_raw_inode));
+
+#if 0
+			putLabeledWord("\t\t dsize = ", jNode->dsize);
+			putstr("\t\t target = ");
+			putnstr(src, jNode->dsize);
+			putstr("\r\n");
+#endif
+			strncpy(tmp, src, jNode->dsize);
+			tmp[jNode->dsize] = '\0';
+			break;
+		}
+		b2 = b2->next;
+	}
+	/* ok so the name of the new file to find is in tmp */
+	/* if it starts with a slash it is root based else shared dirs */
+	if (tmp[0] == '/')
+		pino = 1;
+	else
+		pino = jDirFound->pino;
+
+	return jffs2_1pass_search_inode(pL, tmp, pino);
+}
+
+static u32
+jffs2_1pass_search_list_inodes(struct b_lists * pL, const char *fname, u32 pino)
+{
+	int i;
+	char tmp[256];
+	char working_tmp[256];
+	char *c;
+
+	/* discard any leading slash */
+	i = 0;
+	while (fname[i] == '/')
+		i++;
+	strcpy(tmp, &fname[i]);
+	working_tmp[0] = '\0';
+	while ((c = (char *) strchr(tmp, '/')))	/* we are still dired searching */
+	{
+		strncpy(working_tmp, tmp, c - tmp);
+		working_tmp[c - tmp] = '\0';
+		for (i = 0; i < strlen(c) - 1; i++)
+			tmp[i] = c[i + 1];
+		tmp[i] = '\0';
+		/* only a failure if we arent looking at top level */
+		if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino)) && (working_tmp[0])) {
+			putstr("find_inode failed for name=");
+			putstr(working_tmp);
+			putstr("\r\n");
+			return 0;
+		}
+	}
+
+	if (tmp[0] && !(pino = jffs2_1pass_find_inode(pL, tmp, pino))) {
+		putstr("find_inode failed for name=");
+		putstr(tmp);
+		putstr("\r\n");
+		return 0;
+	}
+	/* this is for the bare filename, directories have already been mapped */
+	if (!(pino = jffs2_1pass_list_inodes(pL, pino))) {
+		putstr("find_inode failed for name=");
+		putstr(tmp);
+		putstr("\r\n");
+		return 0;
+	}
+	return pino;
+
+}
+
+unsigned char
+jffs2_1pass_rescan_needed(struct part_info *part)
+{
+	struct b_node *b;
+	struct jffs2_unknown_node *node;
+	struct b_lists *pL=(struct b_lists *)part->jffs2_priv;
+
+	if (part->jffs2_priv == 0){
+		DEBUGF ("rescan: First time in use\n");
+		return 1;
+	}
+	/* if we have no list, we need to rescan */
+	if (pL->fragListCount == 0) {
+		DEBUGF ("rescan: fraglist zero\n");
+		return 1;
+	}
+
+	/* or if we are scanninga new partition */
+	if (pL->partOffset != part->offset) {
+		DEBUGF ("rescan: different partition\n");
+		return 1;
+	}
+	/* but suppose someone reflashed the root partition at the same offset... */
+	b = pL->dirListHead;
+	while (b) {
+		node = (struct jffs2_unknown_node *) (b->offset);
+		if (node->nodetype != JFFS2_NODETYPE_DIRENT) {
+			DEBUGF ("rescan: fs changed beneath me? (%lx)\n", (unsigned long) b->offset);
+			return 1;
+		}
+		b = b->next;
+	}
+	return 0;
+}
+
+static u32
+jffs2_1pass_build_lists(struct part_info * part)
+{
+	struct b_lists *pL;
+	struct jffs2_unknown_node *node;
+	u32 offset;
+	u32 max = part->size - sizeof(struct jffs2_raw_inode);
+	u32 counter = 0;
+	u32 counter4 = 0;
+	u32 counterF = 0;
+	u32 counterN = 0;
+
+	/* turn off the lcd.  Refreshing the lcd adds 50% overhead to the */
+	/* jffs2 list building enterprise nope.  in newer versions the overhead is */
+	/* only about 5 %.  not enough to inconvenience people for. */
+	/* lcd_off(); */
+
+	/* if we are building a list we need to refresh the cache. */
+	/* note that since we don't free our memory, eventually this will be bad. */
+	/* but we're a bootldr so what the hell. */
+	jffs_init_1pass_list(part);
+	pL=(struct b_lists *)part->jffs2_priv;
+	pL->partOffset = part->offset;
+	offset = 0;
+	printf("Scanning JFFS2 FS:   ");
+
+	/* start at the beginning of the partition */
+	while (offset < max) {
+	    	if (! (++counter%10000))
+			printf("\b\b%c ", spinner[(counter / 10000) % 4]);
+
+		node = (struct jffs2_unknown_node *) (part->offset + offset);
+		if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) {
+			/* if its a fragment add it */
+			if (node->nodetype == JFFS2_NODETYPE_INODE && inode_crc((struct jffs2_raw_inode *) node)) {
+				if (!(pL->fragListTail = add_node(pL->fragListTail, &(pL->fragListCount),
+								  &(pL->fragListMemBase)))) {
+					putstr("add_node failed!\r\n");
+					return 0;
+				}
+				pL->fragListTail->offset = (u32) (part->offset + offset);
+				if (!pL->fragListHead)
+					pL->fragListHead = pL->fragListTail;
+			} else if (node->nodetype == JFFS2_NODETYPE_DIRENT &&
+				   dirent_crc((struct jffs2_raw_dirent *) node)  &&
+				   dirent_name_crc((struct jffs2_raw_dirent *) node)) {
+				if (! (counterN%100))
+					printf("\b\b.  ");
+#if 0
+				printf("Found DIRENT @ 0x%lx\n", offset);
+				putstr("\r\nbuild_lists:p&l ->");
+				putnstr(((struct jffs2_raw_dirent *) node)->name, ((struct jffs2_raw_dirent *) node)->nsize);
+				putstr("\r\n");
+				putLabeledWord("\tpino = ", ((struct jffs2_raw_dirent *) node)->pino);
+				putLabeledWord("\tnsize = ", ((struct jffs2_raw_dirent *) node)->nsize);
+#endif
+
+				if (!(pL->dirListTail = add_node(pL->dirListTail, &(pL->dirListCount), &(pL->dirListMemBase)))) {
+					putstr("add_node failed!\r\n");
+					return 0;
+				}
+				pL->dirListTail->offset = (u32) (part->offset + offset);
+#if 0
+				putLabeledWord("\ttail = ", (u32) pL->dirListTail);
+				putstr("\ttailName ->");
+				putnstr(((struct jffs2_raw_dirent *) (pL->dirListTail->offset))->name,
+					((struct jffs2_raw_dirent *) (pL->dirListTail->offset))->nsize);
+				putstr("\r\n");
+#endif
+				if (!pL->dirListHead)
+					pL->dirListHead = pL->dirListTail;
+				counterN++;
+			} else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) {
+				if (node->totlen != sizeof(struct jffs2_unknown_node))
+					printf("OOPS Cleanmarker has bad size %d != %d\n", node->totlen, sizeof(struct jffs2_unknown_node));
+			} else {
+				printf("Unknown node type: %x len %d offset 0x%x\n", node->nodetype, node->totlen, offset);
+			}
+			offset += ((node->totlen + 3) & ~3);
+			counterF++;
+		} else if (node->magic == JFFS2_EMPTY_BITMASK && node->nodetype == JFFS2_EMPTY_BITMASK) {
+			offset = jffs2_scan_empty(offset, part);
+		} else {	/* if we know nothing of the filesystem, we just step and look. */
+			offset += 4;
+			counter4++;
+		}
+/*             printf("unknown node magic %4.4x %4.4x @ %lx\n", node->magic, node->nodetype, (unsigned long)node); */
+
+	}
+
+	putstr("\b\b done.\r\n");		/* close off the dots */
+	/* turn the lcd back on. */
+	/* splash(); */
+
+#if 0
+	putLabeledWord("dir entries = ", pL->dirListCount);
+	putLabeledWord("frag entries = ", pL->fragListCount);
+	putLabeledWord("+4 increments = ", counter4);
+	putLabeledWord("+file_offset increments = ", counterF);
+
+#endif
+
+#undef SHOW_ALL
+#undef SHOW_ALL_FRAGMENTS
+
+#ifdef SHOW_ALL
+	{
+		struct b_node *b;
+		struct b_node *b2;
+		struct jffs2_raw_dirent *jDir;
+		struct jffs2_raw_inode *jNode;
+
+		putstr("\r\n\r\n******The directory Entries******\r\n");
+		b = pL->dirListHead;
+		while (b) {
+			jDir = (struct jffs2_raw_dirent *) (b->offset);
+			putstr("\r\n");
+			putnstr(jDir->name, jDir->nsize);
+			putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic);
+			putLabeledWord("\tbuild_list: nodetype = ", jDir->nodetype);
+			putLabeledWord("\tbuild_list: hdr_crc = ", jDir->hdr_crc);
+			putLabeledWord("\tbuild_list: pino = ", jDir->pino);
+			putLabeledWord("\tbuild_list: version = ", jDir->version);
+			putLabeledWord("\tbuild_list: ino = ", jDir->ino);
+			putLabeledWord("\tbuild_list: mctime = ", jDir->mctime);
+			putLabeledWord("\tbuild_list: nsize = ", jDir->nsize);
+			putLabeledWord("\tbuild_list: type = ", jDir->type);
+			putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc);
+			putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc);
+			b = b->next;
+		}
+
+#ifdef SHOW_ALL_FRAGMENTS
+		putstr("\r\n\r\n******The fragment Entries******\r\n");
+		b = pL->fragListHead;
+		while (b) {
+			jNode = (struct jffs2_raw_inode *) (b->offset);
+			putLabeledWord("\r\n\tbuild_list: FLASH_OFFSET = ", b->offset);
+			putLabeledWord("\tbuild_list: totlen = ", jNode->totlen);
+			putLabeledWord("\tbuild_list: inode = ", jNode->ino);
+			putLabeledWord("\tbuild_list: version = ", jNode->version);
+			putLabeledWord("\tbuild_list: isize = ", jNode->isize);
+			putLabeledWord("\tbuild_list: atime = ", jNode->atime);
+			putLabeledWord("\tbuild_list: offset = ", jNode->offset);
+			putLabeledWord("\tbuild_list: csize = ", jNode->csize);
+			putLabeledWord("\tbuild_list: dsize = ", jNode->dsize);
+			putLabeledWord("\tbuild_list: compr = ", jNode->compr);
+			putLabeledWord("\tbuild_list: usercompr = ", jNode->usercompr);
+			putLabeledWord("\tbuild_list: flags = ", jNode->flags);
+			b = b->next;
+		}
+#endif /* SHOW_ALL_FRAGMENTS */
+	}
+
+#endif	/* SHOW_ALL */
+	/* give visual feedback that we are done scanning the flash */
+	led_blink(0x0, 0x0, 0x1, 0x1);	/* off, forever, on 100ms, off 100ms */
+	return 1;
+}
+
+
+
+
+
+static u32
+jffs2_1pass_fill_info(struct b_lists * pL, struct b_jffs2_info * piL)
+{
+	struct b_node *b;
+	struct jffs2_raw_inode *jNode;
+	int i;
+
+	b = pL->fragListHead;
+	for (i = 0; i < JFFS2_NUM_COMPR; i++) {
+		piL->compr_info[i].num_frags = 0;
+		piL->compr_info[i].compr_sum = 0;
+		piL->compr_info[i].decompr_sum = 0;
+	}
+
+	while (b) {
+		jNode = (struct jffs2_raw_inode *) (b->offset);
+		if (jNode->compr < JFFS2_NUM_COMPR) {
+			piL->compr_info[jNode->compr].num_frags++;
+			piL->compr_info[jNode->compr].compr_sum += jNode->csize;
+			piL->compr_info[jNode->compr].decompr_sum += jNode->dsize;
+		}
+		b = b->next;
+	}
+	return 0;
+}
+
+
+
+static struct b_lists *
+jffs2_get_list(struct part_info * part, const char *who)
+{
+	if (jffs2_1pass_rescan_needed(part)) {
+		if (!jffs2_1pass_build_lists(part)) {
+			printf("%s: Failed to scan JFFSv2 file structure\n", who);
+			return NULL;
+		}
+	}
+	return (struct b_lists *)part->jffs2_priv;
+}
+
+
+/* Print directory / file contents */
+u32
+jffs2_1pass_ls(struct part_info * part, const char *fname)
+{
+	struct b_lists *pl;
+	long ret = 0;
+	u32 inode;
+
+	if (! (pl  = jffs2_get_list(part, "ls")))
+		return 0;
+
+	if (! (inode = jffs2_1pass_search_list_inodes(pl, fname, 1))) {
+		putstr("ls: Failed to scan jffs2 file structure\r\n");
+		return 0;
+	}
+
+
+#if 0
+	putLabeledWord("found file at inode = ", inode);
+	putLabeledWord("read_inode returns = ", ret);
+#endif
+
+	return ret;
+}
+
+
+
+
+
+/* Load a file from flash into memory. fname can be a full path */
+u32
+jffs2_1pass_load(char *dest, struct part_info * part, const char *fname)
+{
+
+	struct b_lists *pl;
+	long ret = 0;
+	u32 inode;
+
+	if (! (pl  = jffs2_get_list(part, "load")))
+		return 0;
+
+	if (! (inode = jffs2_1pass_search_inode(pl, fname, 1))) {
+		putstr("load: Failed to find inode\r\n");
+		return 0;
+	}
+
+	/* Resolve symlinks */
+	if (! (inode = jffs2_1pass_resolve_inode(pl, inode))) {
+		putstr("load: Failed to resolve inode structure\r\n");
+		return 0;
+	}
+
+	if ((ret = jffs2_1pass_read_inode(pl, inode, dest)) < 0) {
+		putstr("load: Failed to read inode\r\n");
+		return 0;
+	}
+
+	DEBUGF ("load: loaded '%s' to 0x%lx (%ld bytes)\n", fname,
+				(unsigned long) dest, ret);
+	return ret;
+}
+
+/* Return information about the fs on this partition */
+u32
+jffs2_1pass_info(struct part_info * part)
+{
+	struct b_jffs2_info info;
+	struct b_lists *pl;
+	int i;
+
+	if (! (pl  = jffs2_get_list(part, "info")))
+		return 0;
+
+	jffs2_1pass_fill_info(pl, &info);
+	for (i=0; i < JFFS2_NUM_COMPR; i++) {
+		printf("Compression: %s\n", compr_names[i]);
+		printf("\tfrag count: %d\n", info.compr_info[i].num_frags);
+		printf("\tcompressed sum: %d\n", info.compr_info[i].compr_sum);
+		printf("\tuncompressed sum: %d\n", info.compr_info[i].decompr_sum);
+	}
+	return 1;
+}
+
+#endif /* CFG_CMD_JFFS2 */
diff --git a/include/asm-ppc/pnp.h b/include/asm-ppc/pnp.h
new file mode 100644
index 00000000000..15bf7f1dbb4
--- /dev/null
+++ b/include/asm-ppc/pnp.h
@@ -0,0 +1,643 @@
+/* 11/02/95                                                                   */
+/*----------------------------------------------------------------------------*/
+/*      Plug and Play header definitions                                      */
+/*----------------------------------------------------------------------------*/
+
+/* Structure map for PnP on PowerPC Reference Platform                        */
+/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993.  It        */
+/* (or later versions) is available on Compuserve in the PLUGPLAY area.       */
+/* This code has extensions to that specification, namely new short and       */
+/* long tag types for platform dependent information                          */
+
+/* Warning: LE notation used throughout this file                             */
+
+/* For enum's: if given in hex then they are bit significant, i.e.            */
+/* only one bit is on for each enum                                           */
+
+#ifndef _PNP_
+#define _PNP_
+
+#ifndef __ASSEMBLY__
+#define MAX_MEM_REGISTERS 9
+#define MAX_IO_PORTS 20
+#define MAX_IRQS 7
+/*#define MAX_DMA_CHANNELS 7*/
+
+/* Interrupt controllers */
+
+#define PNPinterrupt0 "PNP0000"      /* AT Interrupt Controller               */
+#define PNPinterrupt1 "PNP0001"      /* EISA Interrupt Controller             */
+#define PNPinterrupt2 "PNP0002"      /* MCA Interrupt Controller              */
+#define PNPinterrupt3 "PNP0003"      /* APIC                                  */
+#define PNPExtInt     "IBM000D"      /* PowerPC Extended Interrupt Controller */
+
+/* Timers */
+
+#define PNPtimer0     "PNP0100"      /* AT Timer                              */
+#define PNPtimer1     "PNP0101"      /* EISA Timer                            */
+#define PNPtimer2     "PNP0102"      /* MCA Timer                             */
+
+/* DMA controllers */
+
+#define PNPdma0       "PNP0200"      /* AT DMA Controller                     */
+#define PNPdma1       "PNP0201"      /* EISA DMA Controller                   */
+#define PNPdma2       "PNP0202"      /* MCA DMA Controller                    */
+
+/* start of August 15, 1994 additions */
+/* CMOS */
+#define PNPCMOS       "IBM0009"      /* CMOS                                  */
+
+/* L2 Cache */
+#define PNPL2         "IBM0007"      /* L2 Cache                              */
+
+/* NVRAM */
+#define PNPNVRAM      "IBM0008"      /* NVRAM                                 */
+
+/* Power Management */
+#define PNPPM         "IBM0005"      /* Power Management                      */
+/* end of August 15, 1994 additions */
+
+/* Keyboards */
+
+#define PNPkeyboard0  "PNP0300"      /* IBM PC/XT KB Cntlr (83 key, no mouse) */
+#define PNPkeyboard1  "PNP0301"      /* Olivetti ICO (102 key)                */
+#define PNPkeyboard2  "PNP0302"      /* IBM PC/AT KB Cntlr (84 key)           */
+#define PNPkeyboard3  "PNP0303"      /* IBM Enhanced (101/2 key, PS/2 mouse)  */
+#define PNPkeyboard4  "PNP0304"      /* Nokia 1050 KB Cntlr                   */
+#define PNPkeyboard5  "PNP0305"      /* Nokia 9140 KB Cntlr                   */
+#define PNPkeyboard6  "PNP0306"      /* Standard Japanese KB Cntlr            */
+#define PNPkeyboard7  "PNP0307"      /* Microsoft Windows (R) KB Cntlr        */
+
+/* Parallel port controllers */
+
+#define PNPparallel0 "PNP0400"       /* Standard LPT Parallel Port            */
+#define PNPparallel1 "PNP0401"       /* ECP Parallel Port                     */
+#define PNPepp       "IBM001C"       /* EPP Parallel Port                     */
+
+/* Serial port controllers */
+
+#define PNPserial0   "PNP0500"       /* Standard PC Serial port               */
+#define PNPSerial1   "PNP0501"       /* 16550A Compatible Serial port         */
+
+/* Disk controllers */
+
+#define PNPdisk0     "PNP0600"       /* Generic ESDI/IDE/ATA Compat HD Cntlr  */
+#define PNPdisk1     "PNP0601"       /* Plus Hardcard II                      */
+#define PNPdisk2     "PNP0602"       /* Plus Hardcard IIXL/EZ                 */
+
+/* Diskette controllers */
+
+#define PNPdiskette0 "PNP0700"       /* PC Standard Floppy Disk Controller    */
+
+/* Display controllers */
+
+#define PNPdisplay0  "PNP0900"       /* VGA Compatible                        */
+#define PNPdisplay1  "PNP0901"       /* Video Seven VGA                       */
+#define PNPdisplay2  "PNP0902"       /* 8514/A Compatible                     */
+#define PNPdisplay3  "PNP0903"       /* Trident VGA                           */
+#define PNPdisplay4  "PNP0904"       /* Cirrus Logic Laptop VGA               */
+#define PNPdisplay5  "PNP0905"       /* Cirrus Logic VGA                      */
+#define PNPdisplay6  "PNP0906"       /* Tseng ET4000 or ET4000/W32            */
+#define PNPdisplay7  "PNP0907"       /* Western Digital VGA                   */
+#define PNPdisplay8  "PNP0908"       /* Western Digital Laptop VGA            */
+#define PNPdisplay9  "PNP0909"       /* S3                                    */
+#define PNPdisplayA  "PNP090A"       /* ATI Ultra Pro/Plus (Mach 32)          */
+#define PNPdisplayB  "PNP090B"       /* ATI Ultra (Mach 8)                    */
+#define PNPdisplayC  "PNP090C"       /* XGA Compatible                        */
+#define PNPdisplayD  "PNP090D"       /* ATI VGA Wonder                        */
+#define PNPdisplayE  "PNP090E"       /* Weitek P9000 Graphics Adapter         */
+#define PNPdisplayF  "PNP090F"       /* Oak Technology VGA                    */
+
+/* Peripheral busses */
+
+#define PNPbuses0    "PNP0A00"       /* ISA Bus                               */
+#define PNPbuses1    "PNP0A01"       /* EISA Bus                              */
+#define PNPbuses2    "PNP0A02"       /* MCA Bus                               */
+#define PNPbuses3    "PNP0A03"       /* PCI Bus                               */
+#define PNPbuses4    "PNP0A04"       /* VESA/VL Bus                           */
+
+/* RTC, BIOS, planar devices */
+
+#define PNPspeaker0  "PNP0800"       /* AT Style Speaker Sound                */
+#define PNPrtc0      "PNP0B00"       /* AT RTC                                */
+#define PNPpnpbios0  "PNP0C00"       /* PNP BIOS (only created by root enum)  */
+#define PNPpnpbios1  "PNP0C01"       /* System Board Memory Device            */
+#define PNPpnpbios2  "PNP0C02"       /* Math Coprocessor                      */
+#define PNPpnpbios3  "PNP0C03"       /* PNP BIOS Event Notification Interrupt */
+
+/* PCMCIA controller */
+
+#define PNPpcmcia0   "PNP0E00"       /* Intel 82365 Compatible PCMCIA Cntlr   */
+
+/* Mice */
+
+#define PNPmouse0    "PNP0F00"       /* Microsoft Bus Mouse                   */
+#define PNPmouse1    "PNP0F01"       /* Microsoft Serial Mouse                */
+#define PNPmouse2    "PNP0F02"       /* Microsoft Inport Mouse                */
+#define PNPmouse3    "PNP0F03"       /* Microsoft PS/2 Mouse                  */
+#define PNPmouse4    "PNP0F04"       /* Mousesystems Mouse                    */
+#define PNPmouse5    "PNP0F05"       /* Mousesystems 3 Button Mouse - COM2    */
+#define PNPmouse6    "PNP0F06"       /* Genius Mouse - COM1                   */
+#define PNPmouse7    "PNP0F07"       /* Genius Mouse - COM2                   */
+#define PNPmouse8    "PNP0F08"       /* Logitech Serial Mouse                 */
+#define PNPmouse9    "PNP0F09"       /* Microsoft Ballpoint Serial Mouse      */
+#define PNPmouseA    "PNP0F0A"       /* Microsoft PNP Mouse                   */
+#define PNPmouseB    "PNP0F0B"       /* Microsoft PNP Ballpoint Mouse         */
+
+/* Modems */
+
+#define PNPmodem0    "PNP9000"       /* Specific IDs TBD                      */
+
+/* Network controllers */
+
+#define PNPnetworkC9 "PNP80C9"       /* IBM Token Ring                        */
+#define PNPnetworkCA "PNP80CA"       /* IBM Token Ring II                     */
+#define PNPnetworkCB "PNP80CB"       /* IBM Token Ring II/Short               */
+#define PNPnetworkCC "PNP80CC"       /* IBM Token Ring 4/16Mbs                */
+#define PNPnetwork27 "PNP8327"       /* IBM Token Ring (All types)            */
+#define PNPnetworket "IBM0010"       /* IBM Ethernet used by Power PC         */
+#define PNPneteisaet "IBM2001"       /* IBM Ethernet EISA adapter             */
+#define PNPAMD79C970 "IBM0016"       /* AMD 79C970 (PCI Ethernet)             */
+
+/* SCSI controllers */
+
+#define PNPscsi0     "PNPA000"       /* Adaptec 154x Compatible SCSI Cntlr    */
+#define PNPscsi1     "PNPA001"       /* Adaptec 174x Compatible SCSI Cntlr    */
+#define PNPscsi2     "PNPA002"       /* Future Domain 16-700 Compat SCSI Cntlr*/
+#define PNPscsi3     "PNPA003"       /* Panasonic CDROM Adapter (SBPro/SB16)  */
+#define PNPscsiF     "IBM000F"       /* NCR 810 SCSI Controller               */
+#define PNPscsi825   "IBM001B"       /* NCR 825 SCSI Controller               */
+#define PNPscsi875   "IBM0018"       /* NCR 875 SCSI Controller               */
+
+/* Sound/Video, Multimedia */
+
+#define PNPmm0       "PNPB000"       /* Sound Blaster Compatible Sound Device */
+#define PNPmm1       "PNPB001"       /* MS Windows Sound System Compat Device */
+#define PNPmmF       "IBM000E"       /* Crystal CS4231 Audio Device           */
+#define PNPv7310     "IBM0015"       /* ASCII V7310 Video Capture Device      */
+#define PNPmm4232    "IBM0017"       /* Crystal CS4232 Audio Device           */
+#define PNPpmsyn     "IBM001D"       /* YMF 289B chip (Yamaha)                */
+#define PNPgp4232    "IBM0012"       /* Crystal CS4232 Game Port              */
+#define PNPmidi4232  "IBM0013"       /* Crystal CS4232 MIDI                   */
+
+/* Operator Panel */
+#define PNPopctl     "IBM000B"       /* Operator's panel                      */
+
+/* Service Processor */
+#define PNPsp        "IBM0011"       /* IBM Service Processor                 */
+#define PNPLTsp      "IBM001E"       /* Lightning/Terlingua Support Processor */
+#define PNPLTmsp     "IBM001F"       /* Lightning/Terlingua Mini-SP           */
+
+/* Memory Controller */
+#define PNPmemctl    "IBM000A"       /* Memory controller                     */
+
+/* Graphics Assist */
+#define PNPg_assist  "IBM0014"       /* Graphics Assist                       */
+
+/* Miscellaneous Device Controllers */
+#define PNPtablet    "IBM0019"       /* IBM Tablet Controller                 */
+
+/* PNP Packet Handles */
+
+#define S1_Packet                0x0A   /* Version resource                   */
+#define S2_Packet                0x15   /* Logical DEVID (without flags)      */
+#define S2_Packet_flags          0x16   /* Logical DEVID (with flags)         */
+#define S3_Packet                0x1C   /* Compatible device ID               */
+#define S4_Packet                0x22   /* IRQ resource (without flags)       */
+#define S4_Packet_flags          0x23   /* IRQ resource (with flags)          */
+#define S5_Packet                0x2A   /* DMA resource                       */
+#define S6_Packet                0x30   /* Depend funct start (w/o priority)  */
+#define S6_Packet_priority       0x31   /* Depend funct start (w/ priority)   */
+#define S7_Packet                0x38   /* Depend funct end                   */
+#define S8_Packet                0x47   /* I/O port resource (w/o fixed loc)  */
+#define S9_Packet_fixed          0x4B   /* I/O port resource (w/ fixed loc)   */
+#define S14_Packet               0x71   /* Vendor defined                     */
+#define S15_Packet               0x78   /* End of resource (w/o checksum)     */
+#define S15_Packet_checksum      0x79   /* End of resource (w/ checksum)      */
+#define L1_Packet                0x81   /* Memory range                       */
+#define L1_Shadow                0x20   /* Memory is shadowable               */
+#define L1_32bit_mem             0x18   /* 32-bit memory only                 */
+#define L1_8_16bit_mem           0x10   /* 8- and 16-bit supported            */
+#define L1_Decode_Hi             0x04   /* decode supports high address       */
+#define L1_Cache                 0x02   /* read cacheable, write-through      */
+#define L1_Writeable             0x01   /* Memory is writeable                */
+#define L2_Packet                0x82   /* ANSI ID string                     */
+#define L3_Packet                0x83   /* Unicode ID string                  */
+#define L4_Packet                0x84   /* Vendor defined                     */
+#define L5_Packet                0x85   /* Large I/O                          */
+#define L6_Packet                0x86   /* 32-bit Fixed Loc Mem Range Desc    */
+#define END_TAG                  0x78   /* End of resource                    */
+#define DF_START_TAG             0x30   /* Dependent function start           */
+#define DF_START_TAG_priority    0x31   /* Dependent function start           */
+#define DF_END_TAG               0x38   /* Dependent function end             */
+#define SUBOPTIMAL_CONFIGURATION 0x2    /* Priority byte sub optimal config   */
+
+/* Device Base Type Codes */
+
+typedef enum _PnP_BASE_TYPE {
+  Reserved = 0,
+  MassStorageDevice = 1,
+  NetworkInterfaceController = 2,
+  DisplayController = 3,
+  MultimediaController = 4,
+  MemoryController = 5,
+  BridgeController = 6,
+  CommunicationsDevice = 7,
+  SystemPeripheral = 8,
+  InputDevice = 9,
+  ServiceProcessor = 0x0A,              /* 11/2/95                            */
+  } PnP_BASE_TYPE;
+
+/* Device Sub Type Codes */
+
+typedef enum _PnP_SUB_TYPE {
+  SCSIController = 0,
+  IDEController = 1,
+  FloppyController = 2,
+  IPIController = 3,
+  OtherMassStorageController = 0x80,
+
+  EthernetController = 0,
+  TokenRingController = 1,
+  FDDIController = 2,
+  OtherNetworkController = 0x80,
+
+  VGAController= 0,
+  SVGAController= 1,
+  XGAController= 2,
+  OtherDisplayController = 0x80,
+
+  VideoController = 0,
+  AudioController = 1,
+  OtherMultimediaController = 0x80,
+
+  RAM = 0,
+  FLASH = 1,
+  OtherMemoryDevice = 0x80,
+
+  HostProcessorBridge = 0,
+  ISABridge = 1,
+  EISABridge = 2,
+  MicroChannelBridge = 3,
+  PCIBridge = 4,
+  PCMCIABridge = 5,
+  VMEBridge = 6,
+  OtherBridgeDevice = 0x80,
+
+  RS232Device = 0,
+  ATCompatibleParallelPort = 1,
+  OtherCommunicationsDevice = 0x80,
+
+  ProgrammableInterruptController = 0,
+  DMAController = 1,
+  SystemTimer = 2,
+  RealTimeClock = 3,
+  L2Cache = 4,
+  NVRAM = 5,
+  PowerManagement = 6,
+  CMOS = 7,
+  OperatorPanel = 8,
+  ServiceProcessorClass1 = 9,
+  ServiceProcessorClass2 = 0xA,
+  ServiceProcessorClass3 = 0xB,
+  GraphicAssist = 0xC,
+  SystemPlanar = 0xF,                   /* 10/5/95                            */
+  OtherSystemPeripheral = 0x80,
+
+  KeyboardController = 0,
+  Digitizer = 1,
+  MouseController = 2,
+  TabletController = 3,                 /* 10/27/95                           */
+  OtherInputController = 0x80,
+
+  GeneralMemoryController = 0,
+  } PnP_SUB_TYPE;
+
+/* Device Interface Type Codes */
+
+typedef enum _PnP_INTERFACE {
+  General = 0,
+  GeneralSCSI = 0,
+  GeneralIDE = 0,
+  ATACompatible = 1,
+
+  GeneralFloppy = 0,
+  Compatible765 = 1,
+  NS398_Floppy = 2,                     /* NS Super I/O wired to use index
+                                           register at port 398 and data
+                                           register at port 399               */
+  NS26E_Floppy = 3,                     /* Ports 26E and 26F                  */
+  NS15C_Floppy = 4,                     /* Ports 15C and 15D                  */
+  NS2E_Floppy = 5,                      /* Ports 2E and 2F                    */
+  CHRP_Floppy = 6,                      /* CHRP Floppy in PR*P system         */
+
+  GeneralIPI = 0,
+
+  GeneralEther = 0,
+  GeneralToken = 0,
+  GeneralFDDI = 0,
+
+  GeneralVGA = 0,
+  GeneralSVGA = 0,
+  GeneralXGA = 0,
+
+  GeneralVideo = 0,
+  GeneralAudio = 0,
+  CS4232Audio = 1,                      /* CS 4232 Plug 'n Play Configured    */
+
+  GeneralRAM = 0,
+  GeneralFLASH = 0,
+  PCIMemoryController = 0,              /* PCI Config Method                  */
+  RS6KMemoryController = 1,             /* RS6K Config Method                 */
+
+  GeneralHostBridge = 0,
+  GeneralISABridge = 0,
+  GeneralEISABridge = 0,
+  GeneralMCABridge = 0,
+  GeneralPCIBridge = 0,
+  PCIBridgeDirect = 0,
+  PCIBridgeIndirect = 1,
+  PCIBridgeRS6K = 2,
+  GeneralPCMCIABridge = 0,
+  GeneralVMEBridge = 0,
+
+  GeneralRS232 = 0,
+  COMx = 1,
+  Compatible16450 = 2,
+  Compatible16550 = 3,
+  NS398SerPort = 4,                     /* NS Super I/O wired to use index
+                                           register at port 398 and data
+                                           register at port 399               */
+  NS26ESerPort = 5,                     /* Ports 26E and 26F                  */
+  NS15CSerPort = 6,                     /* Ports 15C and 15D                  */
+  NS2ESerPort = 7,                      /* Ports 2E and 2F                    */
+
+  GeneralParPort = 0,
+  LPTx = 1,
+  NS398ParPort = 2,                     /* NS Super I/O wired to use index
+                                           register at port 398 and data
+                                           register at port 399               */
+  NS26EParPort = 3,                     /* Ports 26E and 26F                  */
+  NS15CParPort = 4,                     /* Ports 15C and 15D                  */
+  NS2EParPort = 5,                      /* Ports 2E and 2F                    */
+
+  GeneralPIC = 0,
+  ISA_PIC = 1,
+  EISA_PIC = 2,
+  MPIC = 3,
+  RS6K_PIC = 4,
+
+  GeneralDMA = 0,
+  ISA_DMA = 1,
+  EISA_DMA = 2,
+
+  GeneralTimer = 0,
+  ISA_Timer = 1,
+  EISA_Timer = 2,
+  GeneralRTC = 0,
+  ISA_RTC = 1,
+
+  StoreThruOnly = 1,
+  StoreInEnabled = 2,
+  RS6KL2Cache = 3,
+
+  IndirectNVRAM = 0,                    /* Indirectly addressed               */
+  DirectNVRAM = 1,                      /* Memory Mapped                      */
+  IndirectNVRAM24 = 2,                  /* Indirectly addressed - 24 bit      */
+
+  GeneralPowerManagement = 0,
+  EPOWPowerManagement = 1,
+  PowerControl = 2,                    /* d1378 */
+
+  GeneralCMOS = 0,
+
+  GeneralOPPanel = 0,
+  HarddiskLight = 1,
+  CDROMLight = 2,
+  PowerLight = 3,
+  KeyLock = 4,
+  ANDisplay = 5,                        /* AlphaNumeric Display               */
+  SystemStatusLED = 6,                  /* 3 digit 7 segment LED              */
+  CHRP_SystemStatusLED = 7,             /* CHRP LEDs in PR*P system           */
+
+  GeneralServiceProcessor = 0,
+
+  TransferData = 1,
+  IGMC32 = 2,
+  IGMC64 = 3,
+
+  GeneralSystemPlanar = 0,              /* 10/5/95                            */
+
+  } PnP_INTERFACE;
+
+/* PnP resources */
+
+/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */
+
+typedef struct _SERIAL_ID {
+  unsigned char VendorID0;              /*    Bit(7)=0                        */
+                                        /*    Bits(6:2)=1st character in      */
+                                        /*       compressed ASCII             */
+                                        /*    Bits(1:0)=2nd character in      */
+                                        /*       compressed ASCII bits(4:3)   */
+  unsigned char VendorID1;              /*    Bits(7:5)=2nd character in      */
+                                        /*       compressed ASCII bits(2:0)   */
+                                        /*    Bits(4:0)=3rd character in      */
+                                        /*       compressed ASCII             */
+  unsigned char VendorID2;              /* Product number - vendor assigned   */
+  unsigned char VendorID3;              /* Product number - vendor assigned   */
+
+/* Serial number is to provide uniqueness if more than one board of same      */
+/* type is in system.  Must be "FFFFFFFF" if feature not supported.           */
+
+  unsigned char Serial0;                /* Unique serial number bits (7:0)    */
+  unsigned char Serial1;                /* Unique serial number bits (15:8)   */
+  unsigned char Serial2;                /* Unique serial number bits (23:16)  */
+  unsigned char Serial3;                /* Unique serial number bits (31:24)  */
+  unsigned char Checksum;
+  } SERIAL_ID;
+
+typedef enum _PnPItemName {
+  Unused = 0,
+  PnPVersion = 1,
+  LogicalDevice = 2,
+  CompatibleDevice = 3,
+  IRQFormat = 4,
+  DMAFormat = 5,
+  StartDepFunc = 6,
+  EndDepFunc = 7,
+  IOPort = 8,
+  FixedIOPort = 9,
+  Res1 = 10,
+  Res2 = 11,
+  Res3 = 12,
+  SmallVendorItem = 14,
+  EndTag = 15,
+  MemoryRange = 1,
+  ANSIIdentifier = 2,
+  UnicodeIdentifier = 3,
+  LargeVendorItem = 4,
+  MemoryRange32 = 5,
+  MemoryRangeFixed32 = 6,
+  } PnPItemName;
+
+/* Define a bunch of access functions for the bits in the tag field */
+
+/* Tag type - 0 = small; 1 = large */
+#define tag_type(t) (((t) & 0x80)>>7)
+#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7))
+
+/* Small item name is 4 bits - one of PnPItemName enum above */
+#define tag_small_item_name(t) (((t) & 0x78)>>3)
+#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3))
+
+/* Small item count is 3 bits - count of further bytes in packet */
+#define tag_small_count(t) ((t) & 0x07)
+#define set_tag_count(t,v) (t = (t & 0x78) | (v))
+
+/* Large item name is 7 bits - one of PnPItemName enum above */
+#define tag_large_item_name(t) ((t) & 0x7f)
+#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v))
+
+/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */
+
+typedef union _PnP_TAG_PACKET {
+  struct _S1_Pack{                      /* VERSION PACKET                     */
+    unsigned char Tag;                  /* small tag = 0x0a                   */
+    unsigned char Version[2];           /* PnP version, Vendor version        */
+    } S1_Pack;
+
+  struct _S2_Pack{                      /* LOGICAL DEVICE ID PACKET           */
+    unsigned char Tag;                  /* small tag = 0x15 or 0x16           */
+    unsigned char DevId[4];             /* Logical device id                  */
+    unsigned char Flags[2];             /* bit(0) boot device;                */
+                                        /* bit(7:1) cmd in range x31-x37      */
+                                        /* bit(7:0) cmd in range x28-x3f (opt)*/
+    } S2_Pack;
+
+  struct _S3_Pack{                      /* COMPATIBLE DEVICE ID PACKET        */
+    unsigned char Tag;                  /* small tag = 0x1c                   */
+    unsigned char CompatId[4];          /* Compatible device id               */
+    } S3_Pack;
+
+  struct _S4_Pack{                      /* IRQ PACKET                         */
+    unsigned char Tag;                  /* small tag = 0x22 or 0x23           */
+    unsigned char IRQMask[2];           /* bit(0) is IRQ0, ...;               */
+                                        /* bit(0) is IRQ8 ...                 */
+    unsigned char IRQInfo;              /* optional; assume bit(0)=1; else    */
+                                        /*  bit(0) - high true edge sensitive */
+                                        /*  bit(1) - low true edge sensitive  */
+                                        /*  bit(2) - high true level sensitive*/
+                                        /*  bit(3) - low true level sensitive */
+                                        /*  bit(7:4) - must be 0              */
+    } S4_Pack;
+
+  struct _S5_Pack{                      /* DMA PACKET                         */
+    unsigned char Tag;                  /* small tag = 0x2a                   */
+    unsigned char DMAMask;              /* bit(0) is channel 0 ...            */
+    unsigned char DMAInfo;
+    } S5_Pack;
+
+  struct _S6_Pack{                      /* START DEPENDENT FUNCTION PACKET    */
+    unsigned char Tag;                  /* small tag = 0x30 or 0x31           */
+    unsigned char Priority;             /* Optional; if missing then x01; else*/
+                                        /*  x00 = best possible               */
+                                        /*  x01 = acceptible                  */
+                                        /*  x02 = sub-optimal but functional  */
+    } S6_Pack;
+
+  struct _S7_Pack{                      /* END DEPENDENT FUNCTION PACKET      */
+    unsigned char Tag;                  /* small tag = 0x38                   */
+    } S7_Pack;
+
+  struct _S8_Pack{                      /* VARIABLE I/O PORT PACKET           */
+    unsigned char Tag;                  /* small tag x47                      */
+    unsigned char IOInfo;               /* x0  = decode only bits(9:0);       */
+#define  ISAAddr16bit         0x01      /* x01 = decode bits(15:0)            */
+    unsigned char RangeMin[2];          /* Min base address                   */
+    unsigned char RangeMax[2];          /* Max base address                   */
+    unsigned char IOAlign;              /* base alignmt, incr in 1B blocks    */
+    unsigned char IONum;                /* number of contiguous I/O ports     */
+    } S8_Pack;
+
+  struct _S9_Pack{                      /* FIXED I/O PORT PACKET              */
+    unsigned char Tag;                  /* small tag = 0x4b                   */
+    unsigned char Range[2];             /* base address 10 bits               */
+    unsigned char IONum;                /* number of contiguous I/O ports     */
+    } S9_Pack;
+
+  struct _S14_Pack{                     /* VENDOR DEFINED PACKET              */
+    unsigned char Tag;                  /* small tag = 0x7m m = 1-7           */
+    union _S14_Data{
+      unsigned char Data[7];            /* Vendor defined                     */
+      struct _S14_PPCPack{              /* Pr*p s14 pack                      */
+         unsigned char Type;            /* 00=non-IBM                         */
+         unsigned char PPCData[6];      /* Vendor defined                     */
+        } S14_PPCPack;
+      } S14_Data;
+    } S14_Pack;
+
+  struct _S15_Pack{                     /* END PACKET                         */
+    unsigned char Tag;                  /* small tag = 0x78 or 0x79           */
+    unsigned char Check;                /* optional - checksum                */
+    } S15_Pack;
+
+  struct _L1_Pack{                      /* MEMORY RANGE PACKET                */
+    unsigned char Tag;                  /* large tag = 0x81                   */
+    unsigned char Count0;               /* x09                                */
+    unsigned char Count1;               /* x00                                */
+    unsigned char Data[9];              /* a variable array of bytes,         */
+                                        /* count in tag                       */
+    } L1_Pack;
+
+  struct _L2_Pack{                      /* ANSI ID STRING PACKET              */
+    unsigned char Tag;                  /* large tag = 0x82                   */
+    unsigned char Count0;               /* Length of string                   */
+    unsigned char Count1;
+    unsigned char Identifier[1];        /* a variable array of bytes,         */
+                                        /* count in tag                       */
+    } L2_Pack;
+
+  struct _L3_Pack{                      /* UNICODE ID STRING PACKET           */
+    unsigned char Tag;                  /* large tag = 0x83                   */
+    unsigned char Count0;               /* Length + 2 of string               */
+    unsigned char Count1;
+    unsigned char Country0;             /* TBD                                */
+    unsigned char Country1;             /* TBD                                */
+    unsigned char Identifier[1];        /* a variable array of bytes,         */
+                                        /* count in tag                       */
+    } L3_Pack;
+
+  struct _L4_Pack{                      /* VENDOR DEFINED PACKET              */
+    unsigned char Tag;                  /* large tag = 0x84                   */
+    unsigned char Count0;
+    unsigned char Count1;
+    union _L4_Data{
+      unsigned char Data[1];            /* a variable array of bytes,         */
+                                        /* count in tag                       */
+      struct _L4_PPCPack{               /* Pr*p L4 packet                     */
+         unsigned char Type;            /* 00=non-IBM                         */
+         unsigned char PPCData[1];      /* a variable array of bytes,         */
+                                        /* count in tag                       */
+        } L4_PPCPack;
+      } L4_Data;
+    } L4_Pack;
+
+  struct _L5_Pack{
+    unsigned char Tag;                  /* large tag = 0x85                   */
+    unsigned char Count0;               /* Count = 17                         */
+    unsigned char Count1;
+    unsigned char Data[17];
+    } L5_Pack;
+
+  struct _L6_Pack{
+    unsigned char Tag;                  /* large tag = 0x86                   */
+    unsigned char Count0;               /* Count = 9                          */
+    unsigned char Count1;
+    unsigned char Data[9];
+    } L6_Pack;
+
+  } PnP_TAG_PACKET;
+
+#endif /* __ASSEMBLY__ */
+#endif  /* ndef _PNP_ */
diff --git a/include/ata.h b/include/ata.h
new file mode 100644
index 00000000000..968b3c47b4b
--- /dev/null
+++ b/include/ata.h
@@ -0,0 +1,246 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Most of the following information was derived from the document
+ * "Information Technology - AT Attachment-3 Interface (ATA-3)"
+ * which can be found at:
+ * http://www.dt.wdc.com/ata/ata-3/ata3r5v.zip
+ * ftp://poctok.iae.nsk.su/pub/asm/Documents/IDE/ATA3R5V.ZIP
+ * ftp://ftp.fee.vutbr.cz/pub/doc/io/ata/ata-3/ata3r5v.zip
+ */
+
+#ifndef	_ATA_H
+#define _ATA_H
+
+/* Register addressing depends on the hardware design; for instance,
+ * 8-bit (register) and 16-bit (data) accesses might use different
+ * address spaces. This is implemented by the following definitions.
+ */
+
+#define ATA_IO_DATA(x)	(CFG_ATA_DATA_OFFSET+(x))
+#define ATA_IO_REG(x)	(CFG_ATA_REG_OFFSET +(x))
+#define ATA_IO_ALT(x)	(CFG_ATA_ALT_OFFSET +(x))
+
+/*
+ * I/O Register Descriptions
+ */
+#define ATA_DATA_REG	ATA_IO_DATA(0)
+#define ATA_ERROR_REG	ATA_IO_REG(1)
+#define ATA_SECT_CNT	ATA_IO_REG(2)
+#define ATA_SECT_NUM	ATA_IO_REG(3)
+#define ATA_CYL_LOW	ATA_IO_REG(4)
+#define ATA_CYL_HIGH	ATA_IO_REG(5)
+#define ATA_DEV_HD	ATA_IO_REG(6)
+#define ATA_COMMAND	ATA_IO_REG(7)
+#define ATA_STATUS	ATA_COMMAND
+#define ATA_DEV_CTL	ATA_IO_ALT(6)
+#define ATA_LBA_LOW	ATA_SECT_NUM
+#define ATA_LBA_MID	ATA_CYL_LOW
+#define ATA_LBA_HIGH	ATA_CYL_HIGH
+#define ATA_LBA_SEL	ATA_DEV_CTL
+
+/*
+ * Status register bits
+ */
+#define ATA_STAT_BUSY	0x80	/* Device Busy			*/
+#define ATA_STAT_READY	0x40	/* Device Ready			*/
+#define ATA_STAT_FAULT	0x20	/* Device Fault			*/
+#define ATA_STAT_SEEK	0x10	/* Device Seek Complete		*/
+#define ATA_STAT_DRQ	0x08	/* Data Request (ready)		*/
+#define ATA_STAT_CORR	0x04	/* Corrected Data Error		*/
+#define ATA_STAT_INDEX	0x02	/* Vendor specific		*/
+#define ATA_STAT_ERR	0x01	/* Error			*/
+
+/*
+ * Device / Head Register Bits
+ */
+#define ATA_DEVICE(x)	((x & 1)<<4)
+#define ATA_LBA		0xE0
+
+/*
+ * ATA Commands (only mandatory commands listed here)
+ */
+#define ATA_CMD_READ	0x20	/* Read Sectors (with retries)	*/
+#define ATA_CMD_READN	0x21	/* Read Sectors ( no  retries)	*/
+#define ATA_CMD_WRITE	0x30	/* Write Sectores (with retries)*/
+#define ATA_CMD_WRITEN	0x31	/* Write Sectors  ( no  retries)*/
+#define ATA_CMD_VRFY	0x40	/* Read Verify  (with retries)	*/
+#define ATA_CMD_VRFYN	0x41	/* Read verify  ( no  retries)	*/
+#define ATA_CMD_SEEK	0x70	/* Seek				*/
+#define ATA_CMD_DIAG	0x90	/* Execute Device Diagnostic	*/
+#define ATA_CMD_INIT	0x91	/* Initialize Device Parameters	*/
+#define ATA_CMD_RD_MULT	0xC4	/* Read Multiple		*/
+#define ATA_CMD_WR_MULT	0xC5	/* Write Multiple		*/
+#define ATA_CMD_SETMULT	0xC6	/* Set Multiple Mode		*/
+#define ATA_CMD_RD_DMA	0xC8	/* Read DMA (with retries)	*/
+#define ATA_CMD_RD_DMAN	0xC9	/* Read DMS ( no  retries)	*/
+#define ATA_CMD_WR_DMA	0xCA	/* Write DMA (with retries)	*/
+#define ATA_CMD_WR_DMAN	0xCB	/* Write DMA ( no  retires)	*/
+#define ATA_CMD_IDENT	0xEC	/* Identify Device		*/
+#define ATA_CMD_SETF	0xEF	/* Set Features			*/
+#define ATA_CMD_CHK_PWR	0xE5	/* Check Power Mode		*/
+
+/*
+ * ATAPI Commands
+ */
+#define ATAPI_CMD_IDENT 0xA1 /* Identify AT Atachment Packed Interface Device */
+#define ATAPI_CMD_PACKET 0xA0 /* Packed Command */
+
+
+#define ATAPI_CMD_INQUIRY 0x12
+#define ATAPI_CMD_REQ_SENSE 0x03
+#define ATAPI_CMD_READ_CAP 0x25
+#define ATAPI_CMD_START_STOP 0x1B
+#define ATAPI_CMD_READ_12 0xA8
+
+
+#define ATA_GET_ERR()	inb(ATA_STATUS)
+#define ATA_GET_STAT()	inb(ATA_STATUS)
+#define ATA_OK_STAT(stat,good,bad)	(((stat)&((good)|(bad)))==(good))
+#define ATA_BAD_R_STAT	(ATA_STAT_BUSY	| ATA_STAT_ERR)
+#define ATA_BAD_W_STAT	(ATA_BAD_R_STAT	| ATA_STAT_FAULT)
+#define ATA_BAD_STAT	(ATA_BAD_R_STAT	| ATA_STAT_DRQ)
+#define ATA_DRIVE_READY	(ATA_READY_STAT	| ATA_STAT_SEEK)
+#define ATA_DATA_READY	(ATA_STAT_DRQ)
+
+#define ATA_BLOCKSIZE	512	/* bytes */
+#define ATA_BLOCKSHIFT	9	/* 2 ^ ATA_BLOCKSIZESHIFT = 512 */
+#define ATA_SECTORWORDS	(512 / sizeof(unsigned long))
+
+#ifndef ATA_RESET_TIME
+#define ATA_RESET_TIME	60	/* spec allows up to 31 seconds */
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * structure returned by ATA_CMD_IDENT, as per ANSI ATA2 rev.2f spec
+ */
+typedef struct hd_driveid {
+	unsigned short	config;		/* lots of obsolete bit flags */
+	unsigned short	cyls;		/* "physical" cyls */
+	unsigned short	reserved2;	/* reserved (word 2) */
+	unsigned short	heads;		/* "physical" heads */
+	unsigned short	track_bytes;	/* unformatted bytes per track */
+	unsigned short	sector_bytes;	/* unformatted bytes per sector */
+	unsigned short	sectors;	/* "physical" sectors per track */
+	unsigned short	vendor0;	/* vendor unique */
+	unsigned short	vendor1;	/* vendor unique */
+	unsigned short	vendor2;	/* vendor unique */
+	unsigned char	serial_no[20];	/* 0 = not_specified */
+	unsigned short	buf_type;
+	unsigned short	buf_size;	/* 512 byte increments; 0 = not_specified */
+	unsigned short	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
+	unsigned char	fw_rev[8];	/* 0 = not_specified */
+	unsigned char	model[40];	/* 0 = not_specified */
+	unsigned char	max_multsect;	/* 0=not_implemented */
+	unsigned char	vendor3;	/* vendor unique */
+	unsigned short	dword_io;	/* 0=not_implemented; 1=implemented */
+	unsigned char	vendor4;	/* vendor unique */
+	unsigned char	capability;	/* bits 0:DMA 1:LBA 2:IORDYsw 3:IORDYsup*/
+	unsigned short	reserved50;	/* reserved (word 50) */
+	unsigned char	vendor5;	/* vendor unique */
+	unsigned char	tPIO;		/* 0=slow, 1=medium, 2=fast */
+	unsigned char	vendor6;	/* vendor unique */
+	unsigned char	tDMA;		/* 0=slow, 1=medium, 2=fast */
+	unsigned short	field_valid;	/* bits 0:cur_ok 1:eide_ok */
+	unsigned short	cur_cyls;	/* logical cylinders */
+	unsigned short	cur_heads;	/* logical heads */
+	unsigned short	cur_sectors;	/* logical sectors per track */
+	unsigned short	cur_capacity0;	/* logical total sectors on drive */
+	unsigned short	cur_capacity1;	/*  (2 words, misaligned int)     */
+	unsigned char	multsect;	/* current multiple sector count */
+	unsigned char	multsect_valid;	/* when (bit0==1) multsect is ok */
+	unsigned int	lba_capacity;	/* total number of sectors */
+	unsigned short	dma_1word;	/* single-word dma info */
+	unsigned short	dma_mword;	/* multiple-word dma info */
+	unsigned short  eide_pio_modes; /* bits 0:mode3 1:mode4 */
+	unsigned short  eide_dma_min;	/* min mword dma cycle time (ns) */
+	unsigned short  eide_dma_time;	/* recommended mword dma cycle time (ns) */
+	unsigned short  eide_pio;       /* min cycle time (ns), no IORDY  */
+	unsigned short  eide_pio_iordy; /* min cycle time (ns), with IORDY */
+	unsigned short	words69_70[2];	/* reserved words 69-70 */
+	unsigned short	words71_74[4];	/* reserved words 71-74 */
+	unsigned short  queue_depth;	/*  */
+	unsigned short  words76_79[4];	/* reserved words 76-79 */
+	unsigned short  major_rev_num;	/*  */
+	unsigned short  minor_rev_num;	/*  */
+	unsigned short  command_set_1;	/* bits 0:Smart 1:Security 2:Removable 3:PM */
+	unsigned short  command_set_2;	/* bits 14:Smart Enabled 13:0 zero */
+	unsigned short  cfsse;		/* command set-feature supported extensions */
+	unsigned short  cfs_enable_1;	/* command set-feature enabled */
+	unsigned short  cfs_enable_2;	/* command set-feature enabled */
+	unsigned short  csf_default;	/* command set-feature default */
+	unsigned short  dma_ultra;	/*  */
+	unsigned short	word89;		/* reserved (word 89) */
+	unsigned short	word90;		/* reserved (word 90) */
+	unsigned short	CurAPMvalues;	/* current APM values */
+	unsigned short	word92;		/* reserved (word 92) */
+	unsigned short	hw_config;	/* hardware config */
+	unsigned short  words94_125[32];/* reserved words 94-125 */
+	unsigned short	last_lun;	/* reserved (word 126) */
+	unsigned short	word127;	/* reserved (word 127) */
+	unsigned short	dlf;		/* device lock function
+					 * 15:9	reserved
+					 * 8	security level 1:max 0:high
+					 * 7:6	reserved
+					 * 5	enhanced erase
+					 * 4	expire
+					 * 3	frozen
+					 * 2	locked
+					 * 1	en/disabled
+					 * 0	capability
+					 */
+	unsigned short  csfo;		/* current set features options
+					 * 15:4	reserved
+					 * 3	auto reassign
+					 * 2	reverting
+					 * 1	read-look-ahead
+					 * 0	write cache
+					 */
+	unsigned short	words130_155[26];/* reserved vendor words 130-155 */
+	unsigned short	word156;
+	unsigned short	words157_159[3];/* reserved vendor words 157-159 */
+	unsigned short	words160_255[95];/* reserved words 160-255 */
+} hd_driveid_t;
+
+
+/*
+ * PIO Mode Configuration
+ *
+ * See ATA-3 (AT Attachment-3 Interface) documentation, Figure 14 / Table 21
+ */
+
+typedef struct {
+	unsigned int	t_setup;	/* Setup  Time in [ns] or clocks	*/
+	unsigned int	t_length;	/* Length Time in [ns] or clocks	*/
+	unsigned int	t_hold;		/* Hold   Time in [ns] or clocks	*/
+}
+pio_config_t;
+
+#define	IDE_MAX_PIO_MODE	4	/* max suppurted PIO mode		*/
+
+/* ------------------------------------------------------------------------- */
+
+#endif /* _ATA_H */
diff --git a/include/commproc.h b/include/commproc.h
new file mode 100644
index 00000000000..410b96d9114
--- /dev/null
+++ b/include/commproc.h
@@ -0,0 +1,1593 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * throught the MPC8xx internal memory map.  See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities.  I (or someone else) will add definitions as they
+ * are needed.  -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_8XX__
+#define __CPM_8XX__
+
+#include <linux/config.h>
+#include <asm/8xx_immap.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* Some commands (there are more...later)
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1	((ushort)0x0000)
+#define CPM_CR_CH_I2C	((ushort)0x0001)	/* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2	((ushort)0x0004)
+#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_SCC3	((ushort)0x0008)
+#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4	((ushort)0x000c)
+#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+/*
+ * DPRAM defines and allocation functions
+ */
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+#ifdef  CFG_ALLOC_DPRAM
+
+#define CPM_DATAONLY_BASE	((uint)0x0800)
+#define CPM_DATAONLY_SIZE	((uint)0x0700)
+#define CPM_DP_NOSPACE		((uint)0x7fffffff)
+
+#else
+
+#define CPM_SERIAL_BASE		0x0800
+#define CPM_I2C_BASE		0x0820
+#define CPM_SPI_BASE		0x0840
+#define CPM_FEC_BASE		0x0860
+#define CPM_WLKBD_BASE		0x0880
+#define CPM_SCC_BASE		0x0900
+#define CPM_POST_BASE		0x0980
+
+#endif
+
+#define CPM_POST_WORD_ADDR	0x07FC
+
+#define BD_IIC_START	((uint) 0x0400) /* <- please use CPM_I2C_BASE !! */
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern	cpm8xx_t	*cpmp;		/* Pointer to comm processor */
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY	((ushort)0x8000)	/* Recieve is empty */
+#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
+#define BD_SC_CM	((ushort)0x0200)	/* Continous mode */
+#define BD_SC_ID	((ushort)0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
+#define BD_SC_BR	((ushort)0x0020)	/* Break received */
+#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
+#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
+#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
+#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1	((uint)0x0000)
+#define PROFF_IIC	((uint)0x0080)
+#define PROFF_SCC2	((uint)0x0100)
+#define PROFF_SPI	((uint)0x0180)
+#define PROFF_SCC3	((uint)0x0200)
+#define PROFF_SMC1	((uint)0x0280)
+#define PROFF_SCC4	((uint)0x0300)
+#define PROFF_SMC2	((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2	((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2	((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3	((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3	((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4	((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4	((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+/**********************************************************************
+ *
+ * Board specific configuration settings.
+ *
+ * Please note that we use the presence of a #define SCC_ENET and/or
+ * #define FEC_ENET to enable the SCC resp. FEC ethernet drivers.
+ **********************************************************************/
+
+
+/***  ADS  *************************************************************/
+
+#if defined(CONFIG_MPC860) && defined(CONFIG_ADS)
+/* This ENET stuff is for the MPC860ADS with ethernet on SCC1.
+ */
+
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+
+#define PB_ENET_TENA	((uint)0x00001000)
+
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002c)
+
+/* 68160 PHY control */
+
+#define PC_ENET_ETHLOOP ((ushort)0x0800)
+#define PC_ENET_TPFLDL	((ushort)0x0400)
+#define PC_ENET_TPSQEL  ((ushort)0x0200)
+
+#endif	/* MPC860ADS */
+
+/***  AMX860  **********************************************/
+
+#if defined(CONFIG_AMX860)
+
+/* This ENET stuff is for the AMX860 with ethernet on SCC1.
+ */
+
+#define PROFF_ENET	PROFF_SCC1
+#define CPM_CR_ENET	CPM_CR_CH_SCC1
+#define SCC_ENET	0
+
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0400)
+#define PA_ENET_RCLK	((ushort)0x0800)
+
+#define PB_ENET_TENA	((uint)0x00001000)
+
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003e)
+
+/* 68160 PHY control */
+
+#define PB_ENET_ETHLOOP	((uint)0x00020000)
+#define PB_ENET_TPFLDL	((uint)0x00010000)
+#define PB_ENET_TPSQEL	((uint)0x00008000)
+#define PD_ENET_ETH_EN	((ushort)0x0004)
+
+#endif	/* CONFIG_AMX860 */
+
+/***  BSEIP  **********************************************************/
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP	((uint)0x00000004)
+#define PB_BSE_FDXDIS	((uint)0x00008000)
+#define PC_BSE_LOOPBACK	((ushort)0x0800)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002c00)
+#endif	/* CONFIG_BSEIP */
+
+/***  BSEIP  **********************************************************/
+
+#ifdef CONFIG_FLAGADM
+/* Enet configuration for the FLAGADM */
+/* Enet on SCC2 */
+
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD		((ushort)0x0004)
+#define PA_ENET_TXD		((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0400)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003400)
+#endif	/* CONFIG_FLAGADM */
+
+/***  C2MON  **********************************************************/
+
+#ifdef CONFIG_C2MON
+
+# ifndef CONFIG_FEC_ENET	/* use SCC for 10Mbps Ethernet	*/
+#  error "Ethernet on SCC not supported on C2MON Board!"
+# else				/* Use FEC for Fast Ethernet */
+
+#undef	SCC_ENET
+#define FEC_ENET
+
+#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
+#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
+#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
+#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
+#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
+#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
+#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
+#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
+#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
+#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
+#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
+#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
+#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
+
+#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
+
+# endif	/* CONFIG_FEC_ENET */
+#endif	/* CONFIG_C2MON */
+
+/*********************************************************************/
+
+
+/***  CCM  and  PCU E  ***********************************************/
+
+/* The PCU E  and  CCM  use the FEC on a MPC860T for Ethernet */
+
+#if defined (CONFIG_PCU_E) || defined(CONFIG_CCM)
+
+#define	FEC_ENET	/* use FEC for EThernet */
+#undef	SCC_ENET
+
+#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
+#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
+#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
+#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
+#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
+#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
+#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
+#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
+#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
+#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
+#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
+#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
+#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
+
+#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
+
+#endif	/* CONFIG_PCU_E, CONFIG_CCM */
+
+/***  ESTEEM 192E  **************************************************/
+#ifdef CONFIG_ESTEEM192E
+/* ESTEEM192E
+ * This ENET stuff is for the MPC850 with ethernet on SCC2. This
+ * is very similar to the RPX-Lite configuration.
+ * Note TENA , LOOPBACK , FDPLEX_DIS on Port B.
+ */
+
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003d00)
+
+#define PB_ENET_LOOPBACK ((uint)0x00004000)
+#define PB_ENET_FDPLEX_DIS ((uint)0x00008000)
+
+#endif
+
+/***  FADS823  ********************************************************/
+
+#if defined(CONFIG_MPC823FADS) && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC823FADS with ethernet on SCC2.
+ */
+#ifdef CONFIG_SCC2_ENET
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define CPMVEC_ENET	CPMVEC_SCC2
+#endif
+
+#ifdef CONFIG_SCC1_ENET
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+#define CPMVEC_ENET	CPMVEC_SCC1
+#endif
+
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0400)
+#define PA_ENET_RCLK	((ushort)0x0200)
+
+#define PB_ENET_TENA	((uint)0x00002000)
+
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002e00)
+
+#endif	/* CONFIG_FADS823FADS */
+
+/***  FADS850SAR  ********************************************************/
+
+#if defined(CONFIG_MPC850SAR) && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC850SAR with ethernet on SCC2.  Some of
+ * this may be unique to the FADS850SAR configuration.
+ * Note TENA is on Port B.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA 6 */
+#define PA_ENET_TCLK	((ushort)0x0800)	/* PA 4 */
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC 9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC 8 */
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002f00)	/* RCLK-CLK2, TCLK-CLK4 */
+#endif	/* CONFIG_FADS850SAR */
+
+/***  FADS860T********************************************************/
+
+#if defined(CONFIG_MPC860T) && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC860TFADS with ethernet on SCC1.
+ */
+
+#ifdef CONFIG_SCC1_ENET
+#define	SCC_ENET	0
+#endif	/* CONFIG_SCC1_ETHERNET */
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0100)
+#define PA_ENET_RCLK	((ushort)0x0200)
+
+#define PB_ENET_TENA	((uint)0x00001000)
+
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002c)
+
+/* This ENET stuff is for the MPC860TFADS with ethernet on FEC.
+ */
+
+#ifdef CONFIG_FEC_ENET
+#define	FEC_ENET	/* use FEC for EThernet */
+#endif	/* CONFIG_FEC_ETHERNET */
+
+#endif	/* CONFIG_FADS860T */
+
+/***  FPS850L  *********************************************************/
+
+#ifdef CONFIG_FPS850L
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PC_ENET_TENA	((ushort)0x0002)	/* PC 14 */
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002600)
+#endif	/* CONFIG_FPS850L */
+
+/*** GEN860T **********************************************************/
+#if defined(CONFIG_GEN860T)
+#undef	SCC_ENET
+#define	FEC_ENET
+
+#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 	*/
+#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 	*/
+#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 	*/
+#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 	*/
+#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 	*/
+#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 	*/
+#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 	*/
+#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 	*/
+#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 	*/
+#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 	*/
+#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 	*/
+#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 	*/
+#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 	*/
+#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3-15	*/
+#endif	/* CONFIG_GEN860T */
+
+/***  GENIETV  ********************************************************/
+
+#if defined(CONFIG_GENIETV)
+/* Ethernet is only on SCC2 */
+
+#define CONFIG_SCC2_ENET
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define CPMVEC_ENET	CPMVEC_SCC2
+
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
+
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002e00)
+
+#endif	/* CONFIG_GENIETV */
+
+/*** GTH ******************************************************/
+
+#ifdef CONFIG_GTH
+#ifdef CONFIG_FEC_ENET
+#define	FEC_ENET	/* use FEC for EThernet */
+#endif	/* CONFIG_FEC_ETHERNET */
+
+/* This ENET stuff is for GTH 10 Mbit ( SCC ) */
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+
+#define PA_ENET_RXD	((ushort)0x0001) /* PA15 */
+#define PA_ENET_TXD	((ushort)0x0002) /* PA14 */
+#define PA_ENET_TCLK	((ushort)0x0800) /* PA4 */
+#define PA_ENET_RCLK	((ushort)0x0400) /* PA5 */
+
+#define PB_ENET_TENA	((uint)0x00001000) /* PB19 */
+
+#define PC_ENET_CLSN	((ushort)0x0010) /* PC11 */
+#define PC_ENET_RENA	((ushort)0x0020) /* PC10 */
+
+/* NOTE. This is reset for 10Mbit port only */
+#define PC_ENET_RESET	((ushort)0x0100)	/* PC 7 */
+
+#define SICR_ENET_MASK	((uint)0x000000ff)
+
+/* TCLK PA4 -->CLK4, RCLK PA5 -->CLK3 */
+#define SICR_ENET_CLKRT	((uint)0x00000037)
+
+#endif	/* CONFIG_GTH */
+
+/*** HERMES-PRO ******************************************************/
+
+/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
+
+#ifdef CONFIG_HERMES
+
+#define	FEC_ENET	/* use FEC for EThernet */
+#undef	SCC_ENET
+
+
+#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
+#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
+#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
+#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
+#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
+#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
+#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
+#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
+#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
+#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
+#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
+#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
+#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
+
+#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
+
+#endif	/* CONFIG_HERMES */
+
+/***  IAD210  **********************************************************/
+
+/* The IAD210 uses the FEC on a MPC860P for Ethernet */
+
+#if defined(CONFIG_IAD210)
+
+# define  FEC_ENET    /* use FEC for Ethernet */
+# undef   SCC_ENET
+
+# define PD_MII_TXD1    ((ushort) 0x1000 )	/* PD  3 */
+# define PD_MII_TXD2    ((ushort) 0x0800 )	/* PD  4 */
+# define PD_MII_TXD3    ((ushort) 0x0400 )	/* PD  5 */
+# define PD_MII_RX_DV   ((ushort) 0x0200 )	/* PD  6 */
+# define PD_MII_RX_ERR  ((ushort) 0x0100 )	/* PD  7 */
+# define PD_MII_RX_CLK  ((ushort) 0x0080 )	/* PD  8 */
+# define PD_MII_TXD0    ((ushort) 0x0040 )	/* PD  9 */
+# define PD_MII_RXD0    ((ushort) 0x0020 )	/* PD 10 */
+# define PD_MII_TX_ERR  ((ushort) 0x0010 )	/* PD 11 */
+# define PD_MII_MDC     ((ushort) 0x0008 )	/* PD 12 */
+# define PD_MII_RXD1    ((ushort) 0x0004 )	/* PD 13 */
+# define PD_MII_RXD2    ((ushort) 0x0002 )	/* PD 14 */
+# define PD_MII_RXD3    ((ushort) 0x0001 )	/* PD 15 */
+
+# define PD_MII_MASK    ((ushort) 0x1FFF )   /* PD 3...15 */
+
+#endif	/* CONFIG_IAD210 */
+
+/*** ICU862  **********************************************************/
+
+#if defined(CONFIG_ICU862)
+
+#ifdef CONFIG_FEC_ENET
+#define FEC_ENET	/* use FEC for EThernet */
+#endif  /* CONFIG_FEC_ETHERNET */
+
+#endif /* CONFIG_ICU862 */
+
+/***  IP860  **********************************************************/
+
+#if defined(CONFIG_IP860)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+#define PA_ENET_RXD	((ushort)0x0001)	/* PA 15 */
+#define PA_ENET_TXD	((ushort)0x0002)	/* PA 14 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
+#define PA_ENET_TCLK	((ushort)0x0100)	/* PA  7 */
+
+#define PC_ENET_TENA	((ushort)0x0001)	/* PC 15 */
+#define PC_ENET_CLSN	((ushort)0x0010)	/* PC 11 */
+#define PC_ENET_RENA	((ushort)0x0020)	/* PC 10 */
+
+#define PB_ENET_RESET	(uint)0x00000008	/* PB 28 */
+#define PB_ENET_JABD	(uint)0x00000004	/* PB 29 */
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000002C)
+#endif	/* CONFIG_IP860 */
+
+/*** IVMS8  **********************************************************/
+
+/* The IVMS8 uses the FEC on a MPC860T for Ethernet */
+
+#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24)
+
+#define	FEC_ENET	/* use FEC for EThernet */
+#undef	SCC_ENET
+
+#define	PB_ENET_POWER	((uint)0x00010000)	/* PB 15 */
+
+#define PC_ENET_RESET	((ushort)0x0010)	/* PC 11 */
+
+#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
+#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
+#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
+#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
+#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
+#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
+#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
+#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
+#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
+#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
+#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
+#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
+#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
+
+#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
+
+#endif	/* CONFIG_IVMS8, CONFIG_IVML24 */
+
+/***  LANTEC  *********************************************************/
+
+#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC2 use.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+
+#define PC_ENET_LBK	((ushort)0x0010)	/* PC 11 */
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x0000FF00)
+#define SICR_ENET_CLKRT	((uint)0x00002E00)
+#endif	/* CONFIG_LANTEC v2 */
+
+/***  LWMON  **********************************************************/
+
+#if defined(CONFIG_LWMON) && !defined(CONFIG_8xx_CONS_SCC2)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC2 use.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0800)	/* PA  4 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK4) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003E00)
+#endif	/* CONFIG_LWMON */
+
+/***  NX823  ***********************************************/
+
+#if defined(CONFIG_NX823)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PROFF_ENET	PROFF_SCC2
+#define CPM_CR_ENET	CPM_CR_CH_SCC2
+#define SCC_ENET	1
+#define PA_ENET_RXD  ((ushort)0x0004)  /* PA 13 */
+#define PA_ENET_TXD  ((ushort)0x0008)  /* PA 12 */
+#define PA_ENET_RCLK ((ushort)0x0200)  /* PA  6 */
+#define PA_ENET_TCLK ((ushort)0x0800)  /* PA  4 */
+
+#define PB_ENET_TENA ((uint)0x00002000)   /* PB 18 */
+
+#define PC_ENET_CLSN ((ushort)0x0040)  /* PC  9 */
+#define PC_ENET_RENA ((ushort)0x0080)  /* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK  ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002f00)
+
+#endif   /* CONFIG_NX823 */
+
+/***  MBX  ************************************************************/
+
+#ifdef CONFIG_MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
+ * to the MBX860 board.  Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PC_ENET_TENA	((ushort)0x0001)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+#endif	/* CONFIG_MBX */
+
+/***  MHPC  ********************************************************/
+
+#if defined(CONFIG_MHPC)
+/* This ENET stuff is for the MHPC with ethernet on SCC2.
+ * Note TENA is on Port B.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA 6 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA 5 */
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC 9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC 8 */
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002e00)	/* RCLK-CLK2, TCLK-CLK3 */
+#endif	/* CONFIG_MHPC */
+
+/***  RPXCLASSIC  *****************************************************/
+
+#ifdef CONFIG_RPXCLASSIC
+
+#ifdef CONFIG_FEC_ENET
+
+# define FEC_ENET				/* use FEC for EThernet */
+# undef SCC_ENET
+
+#else	/* ! CONFIG_FEC_ENET */
+
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00001000)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+
+#endif	/* CONFIG_FEC_ENET */
+
+#endif	/* CONFIG_RPXCLASSIC */
+
+/***  RPXLITE  ********************************************************/
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)
+#define PA_ENET_TXD	((ushort)0x0008)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00002000)
+#define PC_ENET_CLSN	((ushort)0x0040)
+#define PC_ENET_RENA	((ushort)0x0080)
+
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00003d00)
+#endif	/* CONFIG_RPXLITE */
+
+/***  SM850  *********************************************************/
+
+/* The SM850 Service Module uses SCC2 for IrDA and SCC3 for Ethernet */
+
+#ifdef CONFIG_SM850
+#define PROFF_ENET	PROFF_SCC3		/* Ethernet on SCC3 */
+#define CPM_CR_ENET	CPM_CR_CH_SCC3
+#define SCC_ENET	2
+#define PB_ENET_RXD	((uint)0x00000004)	/* PB 29 */
+#define PB_ENET_TXD	((uint)0x00000002)	/* PB 30 */
+#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PC_ENET_LBK	((ushort)0x0008)	/* PC 12 */
+#define PC_ENET_TENA	((ushort)0x0004)	/* PC 13 */
+
+#define PC_ENET_RENA	((ushort)0x0800)	/* PC  4 */
+#define PC_ENET_CLSN	((ushort)0x0400)	/* PC  5 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x00FF0000)
+#define SICR_ENET_CLKRT	((uint)0x00260000)
+#endif	/* CONFIG_SM850 */
+
+/***  SPD823TS  ******************************************************/
+
+#ifdef CONFIG_SPD823TS
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC2 use.
+ */
+#define	PROFF_ENET	PROFF_SCC2		/* Ethernet on SCC2 */
+#define CPM_CR_ENET     CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_MDC	((ushort)0x0001)	/* PA 15 !!! */
+#define PA_ENET_MDIO	((ushort)0x0002)	/* PA 14 !!! */
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+#define	PC_ENET_RESET	((ushort)0x0100)	/* PC  7 !!! */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002E00)
+#endif	/* CONFIG_SPD823TS */
+
+/***  SXNI855T  ******************************************************/
+
+#if defined(CONFIG_SXNI855T)
+
+#ifdef CONFIG_FEC_ENET
+#define	FEC_ENET	/* use FEC for Ethernet */
+#endif	/* CONFIG_FEC_ETHERNET */
+
+#endif	/* CONFIG_SXNI855T */
+
+/***  MVS1, TQM823L, TQM850L, ETX094, R360MPI  ***********************/
+
+#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
+    defined(CONFIG_R360MPI) || \
+    defined(CONFIG_TQM823L) || \
+    defined(CONFIG_TQM850L) || \
+    defined(CONFIG_ETX094)  || \
+    defined(CONFIG_RRVISION)|| \
+   (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC2 use.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
+
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+#if defined(CONFIG_R360MPI)
+#define PC_ENET_LBK	((ushort)0x0008)	/* PC 12 */
+#endif   /* CONFIG_R360MPI */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002600)
+#endif	/* CONFIG_MVS v1, CONFIG_TQM823L, CONFIG_TQM850L, etc. */
+
+/***  TQM860L, TQM855L ************************************************/
+
+#if (defined(CONFIG_TQM860L) || defined(CONFIG_TQM855L))
+
+# ifdef CONFIG_SCC1_ENET	/* use SCC for 10Mbps Ethernet	*/
+
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define	PROFF_ENET	PROFF_SCC1
+#define	CPM_CR_ENET	CPM_CR_CH_SCC1
+#define	SCC_ENET	0
+#define PA_ENET_RXD	((ushort)0x0001)	/* PA 15 */
+#define PA_ENET_TXD	((ushort)0x0002)	/* PA 14 */
+#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
+#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
+
+#define PC_ENET_TENA	((ushort)0x0001)	/* PC 15 */
+#define PC_ENET_CLSN	((ushort)0x0010)	/* PC 11 */
+#define PC_ENET_RENA	((ushort)0x0020)	/* PC 10 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x00000026)
+
+# endif	/* CONFIG_SCC1_ENET */
+
+# ifdef CONFIG_FEC_ENET		/* Use FEC for Fast Ethernet */
+
+#define FEC_ENET
+
+#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
+#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
+#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
+#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
+#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
+#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
+#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
+#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
+#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
+#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
+#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
+#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
+#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
+
+#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
+
+# endif	/* CONFIG_FEC_ENET */
+#endif	/* CONFIG_TQM860L, CONFIG_TQM855L */
+
+#if defined(CONFIG_NETVIA)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC2 use.
+ */
+#define	PROFF_ENET	PROFF_SCC2
+#define	CPM_CR_ENET	CPM_CR_CH_SCC2
+#define	SCC_ENET	1
+#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
+#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
+#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
+#define PA_ENET_TCLK	((ushort)0x0800)	/* PA  4 */
+
+#define PB_ENET_PDN	((ushort)0x4000)	/* PB 17 */
+#define PB_ENET_TENA	((ushort)0x2000)	/* PB 18 */
+
+#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
+#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x0000ff00)
+#define SICR_ENET_CLKRT	((uint)0x00002f00)
+
+#endif	/* CONFIG_NETVIA */
+
+/*********************************************************************/
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY	((ushort)0x8000)
+#define BD_ENET_RX_WRAP		((ushort)0x2000)
+#define BD_ENET_RX_INTR		((ushort)0x1000)
+#define BD_ENET_RX_LAST		((ushort)0x0800)
+#define BD_ENET_RX_FIRST	((ushort)0x0400)
+#define BD_ENET_RX_MISS		((ushort)0x0100)
+#define BD_ENET_RX_LG		((ushort)0x0020)
+#define BD_ENET_RX_NO		((ushort)0x0010)
+#define BD_ENET_RX_SH		((ushort)0x0008)
+#define BD_ENET_RX_CR		((ushort)0x0004)
+#define BD_ENET_RX_OV		((ushort)0x0002)
+#define BD_ENET_RX_CL		((ushort)0x0001)
+#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY	((ushort)0x8000)
+#define BD_ENET_TX_PAD		((ushort)0x4000)
+#define BD_ENET_TX_WRAP		((ushort)0x2000)
+#define BD_ENET_TX_INTR		((ushort)0x1000)
+#define BD_ENET_TX_LAST		((ushort)0x0800)
+#define BD_ENET_TX_TC		((ushort)0x0400)
+#define BD_ENET_TX_DEF		((ushort)0x0200)
+#define BD_ENET_TX_HB		((ushort)0x0100)
+#define BD_ENET_TX_LC		((ushort)0x0080)
+#define BD_ENET_TX_RL		((ushort)0x0040)
+#define BD_ENET_TX_RCMASK	((ushort)0x003c)
+#define BD_ENET_TX_UN		((ushort)0x0002)
+#define BD_ENET_TX_CSL		((ushort)0x0001)
+#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST		((ushort)0x0800)
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+	uint	iic_res;	/* reserved */
+	ushort	iic_rpbase;	/* Relocation pointer */
+	ushort	iic_res2;	/* reserved */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;
+	ushort	spi_rpbase;	/* Relocation pointer */
+	ushort	spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x)	((x) &0xF)
+
+/* HDLC parameter RAM.
+*/
+
+typedef struct hdlc_pram_s {
+	/*
+	 * SCC parameter RAM
+	 */
+	ushort	rbase;		/* Rx Buffer descriptor base address */
+	ushort	tbase;		/* Tx Buffer descriptor base address */
+	uchar	rfcr;		/* Rx function code */
+	uchar	tfcr;		/* Tx function code */
+	ushort	mrblr;		/* Rx buffer length */
+	ulong	rstate;		/* Rx internal state */
+	ulong	rptr;		/* Rx internal data pointer */
+	ushort	rbptr;		/* rb BD Pointer */
+	ushort	rcount;		/* Rx internal byte count */
+	ulong	rtemp;		/* Rx temp */
+	ulong	tstate;		/* Tx internal state */
+	ulong	tptr;		/* Tx internal data pointer */
+	ushort	tbptr;		/* Tx BD pointer */
+	ushort	tcount;		/* Tx byte count */
+	ulong	ttemp;		/* Tx temp */
+	ulong	rcrc;		/* temp receive CRC */
+	ulong	tcrc;		/* temp transmit CRC */
+	/*
+	 * HDLC specific parameter RAM
+	 */
+	uchar	res[4];		/* reserved */
+	ulong	c_mask;		/* CRC constant */
+	ulong	c_pres;		/* CRC preset */
+	ushort	disfc;		/* discarded frame counter */
+	ushort	crcec;		/* CRC error counter */
+	ushort	abtsc;		/* abort sequence counter */
+	ushort	nmarc;		/* nonmatching address rx cnt */
+	ushort	retrc;		/* frame retransmission cnt */
+	ushort	mflr;		/* maximum frame length reg */
+	ushort	max_cnt;	/* maximum length counter */
+	ushort	rfthr;		/* received frames threshold */
+	ushort	rfcnt;		/* received frames count */
+	ushort	hmask;		/* user defined frm addr mask */
+	ushort	haddr1;		/* user defined frm address 1 */
+	ushort	haddr2;		/* user defined frm address 2 */
+	ushort	haddr3;		/* user defined frm address 3 */
+	ushort	haddr4;		/* user defined frm address 4 */
+	ushort	tmp;		/* temp */
+	ushort	tmp_mb;		/* temp */
+} hdlc_pram_t;
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR		32
+#define	CPMVEC_PIO_PC15		((ushort)0x1f)
+#define	CPMVEC_SCC1		((ushort)0x1e)
+#define	CPMVEC_SCC2		((ushort)0x1d)
+#define	CPMVEC_SCC3		((ushort)0x1c)
+#define	CPMVEC_SCC4		((ushort)0x1b)
+#define	CPMVEC_PIO_PC14		((ushort)0x1a)
+#define	CPMVEC_TIMER1		((ushort)0x19)
+#define	CPMVEC_PIO_PC13		((ushort)0x18)
+#define	CPMVEC_PIO_PC12		((ushort)0x17)
+#define	CPMVEC_SDMA_CB_ERR	((ushort)0x16)
+#define CPMVEC_IDMA1		((ushort)0x15)
+#define CPMVEC_IDMA2		((ushort)0x14)
+#define CPMVEC_TIMER2		((ushort)0x12)
+#define CPMVEC_RISCTIMER	((ushort)0x11)
+#define CPMVEC_I2C		((ushort)0x10)
+#define	CPMVEC_PIO_PC11		((ushort)0x0f)
+#define	CPMVEC_PIO_PC10		((ushort)0x0e)
+#define CPMVEC_TIMER3		((ushort)0x0c)
+#define	CPMVEC_PIO_PC9		((ushort)0x0b)
+#define	CPMVEC_PIO_PC8		((ushort)0x0a)
+#define	CPMVEC_PIO_PC7		((ushort)0x09)
+#define CPMVEC_TIMER4		((ushort)0x07)
+#define	CPMVEC_PIO_PC6		((ushort)0x06)
+#define	CPMVEC_SPI		((ushort)0x05)
+#define	CPMVEC_SMC1		((ushort)0x04)
+#define	CPMVEC_SMC2		((ushort)0x03)
+#define	CPMVEC_PIO_PC5		((ushort)0x02)
+#define	CPMVEC_PIO_PC4		((ushort)0x01)
+#define	CPMVEC_ERROR		((ushort)0x00)
+
+extern void irq_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+#endif /* __CPM_8XX__ */
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
new file mode 100644
index 00000000000..d66266126c8
--- /dev/null
+++ b/include/configs/ML2.h
@@ -0,0 +1,246 @@
+/*
+ * ML2.h: ML2 specific config options
+ *
+ * Copyright 2002 Mind NV
+ *
+ * http://www.mind.be/
+ *
+ * Author : Peter De Schrijver (p2@mind.be)
+ *
+ * Derived from : other configuration header files in this tree
+ *
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License (GPL) version 2, incorporated herein by
+ * reference. Drivers based on or derived from this code fall under the GPL
+ * and must retain the authorship, copyright and this license notice. This
+ * file is not a complete program and may only be used when the entire
+ * program is licensed under the GPL.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405		1	/* This is a PPC405 CPU		*/
+#define CONFIG_4xx		1	/* ...member of PPC4xx family   */
+#define CONFIG_ML2	1	/* ...on a ML2 board	*/
+
+
+#define CFG_ENV_IS_IN_FLASH     1
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_FLASH
+#else
+#ifdef CFG_ENV_IS_IN_FLASH
+#undef CFG_ENV_IS_IN_NVRAM
+#endif
+#endif
+
+#define CONFIG_BAUDRATE		9600
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
+
+#if 1
+#define CONFIG_BOOTCOMMAND	"bootm" /* autoboot command	*/
+#else
+#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/
+#endif
+
+#define CONFIG_PREBOOT		"fsload 0x00100000 /boot/image"
+
+/* Size (bytes) of interrupt driven serial port buffer.
+ * Set to 0 to use polling instead of interrupts.
+ * Setting to 0 will also disable RTS/CTS handshaking.
+ */
+#if 0
+#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
+#else
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#endif
+
+#if 0
+#define CONFIG_BOOTARGS		"root=/dev/nfs "                        \
+    "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 "        \
+    "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
+#else
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock2 "			\
+   "console=ttyS0 console=tty"
+
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+
+
+#define CONFIG_COMMANDS	       ( (CONFIG_CMD_DFL & (~CFG_CMD_NET)	 &  \
+				(~CFG_CMD_RTC) & ~(CFG_CMD_PCI)  & ~(CFG_CMD_I2C)) | \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_KGDB	| \
+				CFG_CMD_BEDBUG	| \
+				CFG_CMD_ELF	 | CFG_CMD_JFFS2 )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_SYS_CLK_FREQ 50000000
+
+#define CONFIG_SPD_EEPROM      1       /* use SPD EEPROM for setup    */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+/*
+ * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CFG_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
+ * The Linux BASE_BAUD define should match this configuration.
+ *    baseBaud = cpuClock/(uartDivisor*16)
+ * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
+#undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+
+#define CFG_BASE_BAUD       (3125000*16)
+#define CFG_NS16550_CLK CFG_BASE_BAUD
+#define CFG_DUART_CHAN		0
+#define CFG_NS16550_COM1	0xa0001003
+#define CFG_NS16550_COM2	0xa0011003
+#define CFG_NS16550_REG_SIZE -4
+#define CFG_NS16550 1
+#define CFG_INIT_CHAN1	 1
+#define CFG_INIT_CHAN2	 1
+
+/* The following table includes the supported baudrates */
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x18000000
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 196 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+/* BEG ENVIRONNEMENT FLASH */
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
+#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
+#endif
+/* END ENVIRONNEMENT FLASH */
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR	0xf0000000	/* NVRAM base address	*/
+#define CFG_NVRAM_SIZE		0x1ff8		/* NVRAM size	*/
+
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE		0x1000		/* Size of Environment vars	*/
+#define CFG_ENV_ADDR		\
+	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
+#endif
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
+
+
+/* Configuration Port location */
+#define CONFIG_PORT_ADDR	0xF0000500
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+
+#define CFG_INIT_RAM_ADDR       0x800000  /* inside of SDRAM                     */
+#define CFG_INIT_RAM_END        0x2000  /* End of used area in RAM             */
+#define CFG_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Definitions for Serial Presence Detect EEPROM address
+ * (to get SDRAM settings)
+ */
+#define SPD_EEPROM_ADDRESS      0x50
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* JFFS2 stuff */
+
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_NUM_BANKS 1
+#define CFG_JFFS2_FIRST_SECTOR 1
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MOUSSE.h b/include/configs/MOUSSE.h
new file mode 100644
index 00000000000..109ed3d811e
--- /dev/null
+++ b/include/configs/MOUSSE.h
@@ -0,0 +1,332 @@
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * James F. Dougherty (jfd@cs.stanford.edu)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the MOUSSE board.
+ * See also: http://www.vooha.com/
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X      1
+#define CONFIG_MPC8240      1
+#define CONFIG_MOUSSE       1
+#define CFG_ADDR_MAP_B      1
+#define CONFIG_CONS_INDEX   1
+#define CONFIG_BAUDRATE     9600
+#if 1
+#define CONFIG_BOOTCOMMAND  "tftp 100000 vmlinux.img;bootm"    /* autoboot command */
+#else
+#define CONFIG_BOOTCOMMAND  "bootm ffe10000"
+#endif
+#define CONFIG_BOOTARGS      "console=ttyS0 root=/dev/nfs rw nfsroot=209.128.93.133:/boot nfsaddrs=209.128.93.133:209.128.93.138"
+#define CONFIG_BOOTDELAY     3
+#define CONFIG_COMMANDS      (CONFIG_CMD_DFL|CFG_CMD_ASKENV|CFG_CMD_DATE)
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ETH_ADDR      "00:10:18:10:00:06"
+
+#define CONFIG_DOS_PARTITION  1 /* MSDOS bootable partitiion support */
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+#include "../board/mousse/mousse.h"
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CFG_LONGHELP                /* undef to save memory     */
+#define CFG_PROMPT      "=>"  /* Monitor Command Prompt   */
+#define CFG_CBSIZE      256        /* Console I/O Buffer Size  */
+#define CFG_PBSIZE      (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS     8           /* Max number of command args   */
+
+#define CFG_BARGSIZE    CFG_CBSIZE  /* Boot Argument Buffer Size    */
+#define CFG_LOAD_ADDR   0x00100000  /* Default load address         */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE      0x00000000
+
+#ifdef DEBUG
+#define CFG_MONITOR_BASE    CFG_SDRAM_BASE
+#else
+#define CFG_MONITOR_BASE    CFG_FLASH_BASE
+#endif
+
+#ifdef DEBUG
+#define CFG_MONITOR_LEN     (4 << 20)	/* lots of mem ... */
+#else
+#define CFG_MONITOR_LEN     (512 << 10)	/* 512K PLCC bootrom */
+#endif
+#define CFG_MALLOC_LEN      (2*(4096 << 10))    /* 2*4096kB for malloc()  */
+
+#define CFG_MEMTEST_START   0x00004000	/* memtest works on      */
+#define CFG_MEMTEST_END     0x02000000	/* 0 ... 32 MB in DRAM   */
+
+
+#define CFG_EUMB_ADDR       0xFC000000
+
+#define CFG_ISA_MEM         0xFD000000
+#define CFG_ISA_IO          0xFE000000
+
+#define CFG_FLASH_BASE      0xFFF00000
+#define CFG_FLASH_SIZE      ((uint)(512 * 1024))
+#define CFG_RESET_ADDRESS   0xFFF00100
+#define FLASH_BASE0_PRELIM  0xFFF00000  /* 512K PLCC FLASH/AM29F040*/
+#define FLASH_BASE0_SIZE    0x80000     /* 512K */
+#define FLASH_BASE1_PRELIM  0xFFE10000  /* AMD 29LV160DB
+					   1MB - 64K FLASH0 SEG =960K
+					   (size=0xf0000)*/
+
+#define CFG_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE	1
+
+#define CFG_NS16550_CLK		18432000
+
+#define CFG_NS16550_COM1	0xFFE08080
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_SDRAM_BASE + CFG_MONITOR_LEN
+#define CFG_INIT_RAM_END   0x2F00  /* End of used area in DPRAM  */
+#define CFG_GBL_DATA_SIZE  64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET  CFG_GBL_DATA_OFFSET
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
+#define CFG_HZ               1000
+
+#define CFG_ETH_DEV_FN       0x00
+#define CFG_ETH_IOBASE       0x00104000
+
+
+	/* Bit-field values for MCCR1.
+	 */
+#define CFG_ROMNAL          8
+#define CFG_ROMFAL          8
+
+	/* Bit-field values for MCCR2.
+	 */
+#define CFG_REFINT          0xf5     /* Refresh interval               */
+
+	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+	 */
+#define CFG_BSTOPRE         0x79
+
+#ifdef INCLUDE_ECC
+#define USE_ECC				1
+#else /* INCLUDE_ECC */
+#define USE_ECC				0
+#endif /* INCLUDE_ECC */
+
+
+	/* Bit-field values for MCCR3.
+	 */
+#define CFG_REFREC          8       /* Refresh to activate interval   */
+#define CFG_RDLAT           (4+USE_ECC)   /* Data latancy from read command */
+
+	/* Bit-field values for MCCR4.
+	 */
+#define CFG_PRETOACT        3       /* Precharge to activate interval */
+#define CFG_ACTTOPRE        5       /* Activate to Precharge interval */
+#define CFG_SDMODE_CAS_LAT  3       /* SDMODE CAS latancy             */
+#define CFG_SDMODE_WRAP     0       /* SDMODE wrap type               */
+#define CFG_SDMODE_BURSTLEN 2       /* SDMODE Burst length            */
+#define CFG_ACTORW          2
+#define CFG_REGISTERD_TYPE_BUFFER (1-USE_ECC)
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+#define CFG_RAM_SIZE        0x04000000  /* 64MB */
+
+
+#define CFG_BANK0_START     0x00000000
+#define CFG_BANK0_END       (CFG_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE    1
+#define CFG_BANK1_START     0x3ff00000
+#define CFG_BANK1_END       0x3fffffff
+#define CFG_BANK1_ENABLE    0
+#define CFG_BANK2_START     0x3ff00000
+#define CFG_BANK2_END       0x3fffffff
+#define CFG_BANK2_ENABLE    0
+#define CFG_BANK3_START     0x3ff00000
+#define CFG_BANK3_END       0x3fffffff
+#define CFG_BANK3_ENABLE    0
+#define CFG_BANK4_START     0x3ff00000
+#define CFG_BANK4_END       0x3fffffff
+#define CFG_BANK4_ENABLE    0
+#define CFG_BANK5_START     0x3ff00000
+#define CFG_BANK5_END       0x3fffffff
+#define CFG_BANK5_ENABLE    0
+#define CFG_BANK6_START     0x3ff00000
+#define CFG_BANK6_END       0x3fffffff
+#define CFG_BANK6_ENABLE    0
+#define CFG_BANK7_START     0x3ff00000
+#define CFG_BANK7_END       0x3fffffff
+#define CFG_BANK7_ENABLE    0
+
+#define CFG_ODCR            0x7f
+
+
+#define CFG_PGMAX           0x32 /* how long the 8240 reatins the currently accessed page in memory
+                                    see 8240 book for details*/
+#define PCI_MEM_SPACE1_START	0x80000000
+#define PCI_MEM_SPACE2_START	0xfd000000
+
+/* IBAT/DBAT Configuration */
+/* Ram: 64MB, starts at address-0, r/w instruction/data */
+#define CFG_IBAT0U      (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_IBAT0L      (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_DBAT0U      CFG_IBAT0U
+#define CFG_DBAT0L      CFG_IBAT0L
+
+/* MPLD/Port-X I/O Space : data and instruction read/write,  cache-inhibit */
+#define CFG_IBAT1U      (PORTX_DEV_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
+#if 0
+#define CFG_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10  | BATL_MEMCOHERENCE |\
+			 BATL_WRITETHROUGH | BATL_CACHEINHIBIT)
+#else
+#define CFG_IBAT1L      (PORTX_DEV_BASE | BATL_PP_10 |BATL_CACHEINHIBIT)
+#endif
+#define CFG_DBAT1U  	CFG_IBAT1U
+#define CFG_DBAT1L  	CFG_IBAT1L
+
+/* PCI Memory region 1: 0x8XXX_XXXX PCI Mem space: EUMBAR, etc - 16MB */
+#define CFG_IBAT2U  	(PCI_MEM_SPACE1_START|BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L 	(PCI_MEM_SPACE1_START|BATL_PP_10 | BATL_GUARDEDSTORAGE|BATL_CACHEINHIBIT)
+#define CFG_DBAT2U      CFG_IBAT2U
+#define CFG_DBAT2L      CFG_IBAT2L
+
+/* PCI Memory region 2: PCI Devices in 0xFD space */
+#define CFG_IBAT3U  	(PCI_MEM_SPACE2_START|BATU_BL_16M | BATU_VS | BATU_VP)
+#define CFG_IBAT3L 	(PCI_MEM_SPACE2_START|BATL_PP_10 | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
+#define CFG_DBAT3U      CFG_IBAT3U
+#define CFG_DBAT3L      CFG_IBAT3L
+
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ       (8 << 20)   /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS     3       /* Max number of flash banks         */
+#define CFG_MAX_FLASH_SECT      64      /* Max number of sectors in one bank */
+
+#define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)   */
+#define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)   */
+
+#if 0
+#define	CFG_ENV_IS_IN_FLASH	    1
+#define CFG_ENV_OFFSET          0x8000  /* Offset of the Environment Sector	 */
+#define CFG_ENV_SIZE            0x4000  /* Size of the Environment Sector    */
+#else
+#define CFG_ENV_IS_IN_NVRAM          1
+#define CFG_ENV_ADDR            NV_OFF_U_BOOT_ADDR /* PortX NVM Free addr*/
+#define CFG_ENV_OFFSET          CFG_ENV_ADDR
+#define CFG_ENV_SIZE            NV_U_BOOT_ENV_SIZE /* 2K */
+#endif
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE  16
+
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM           0x02    /* Software reboot                  */
+
+/* Localizations */
+#if 0
+#define CONFIG_ETHADDR          0:0:0:0:1:d
+#define CONFIG_IPADDR           172.16.40.113
+#define CONFIG_SERVERIP         172.16.40.111
+#else
+#define CONFIG_ETHADDR          0:0:0:0:1:d
+#define CONFIG_IPADDR           209.128.93.138
+#define CONFIG_SERVERIP         209.128.93.133
+#endif
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI			/* include pci support			*/
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI		/* Multi ethernet cards support 	*/
+
+#define CONFIG_TULIP
+
+#endif  /* __CONFIG_H */
+
+
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
new file mode 100644
index 00000000000..13cf60f1673
--- /dev/null
+++ b/include/configs/csb226.h
@@ -0,0 +1,213 @@
+/*
+ * (C) Copyright 2000, 2001, 2002
+ * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
+ *
+ * Configuration for the Cogent CSB226 board. For details see
+ * http://www.cogcomp.com/csb_csb226.htm
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * include/configs/csb226.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start U-Boot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250 		1	/* This is an PXA250 CPU            */
+#define CONFIG_CSB226		1	/* on a CSB226 board                */
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
+					/* for timer/console/ethernet       */
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART		1	/* we use FFUART on CSB226 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		19200
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL & ~CFG_CMD_NET)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTARGS		"root=ramfs devfs=mount console=ttySA0,115200"
+#define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.1.56
+#define CONFIG_SERVERIP		192.168.1.2
+#define CONFIG_BOOTCOMMAND	""
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+
+/*
+ * Size of malloc() pool; this lives below the uppermost 128 KiB which are
+ * used for the RAM copy of the uboot code
+ *
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+#define CFG_LONGHELP				/* undef to save memory         */
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt       */
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
+
+#define CFG_MEMTEST_START	0xa0400000      /* memtest works on     */
+#define CFG_MEMTEST_END         0xa0800000      /* 4 ... 8 MB in DRAM   */
+
+#undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR           0xa7fe0000      /* default load address */
+						/* RS: where is this documented? */
+						/* RS: is this where U-Boot is  */
+						/* RS: relocated to in RAM?      */
+
+#define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
+						/* RS: the oscillator is actually 3680130?? */
+#define CFG_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
+						/* 0101000001 */
+						/*      ^^^^^ Memory Speed 99.53 MHz         */
+						/*    ^^      Run Mode Speed = 2x Mem Speed  */
+						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
+
+#define CFG_MONITOR_LEN		0x20000		/* 128 KiB */
+
+                                                /* valid baudrates */
+#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
+#ifdef  CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM   */
+#define PHYS_SDRAM_1		0xa0000000	/* SDRAM Bank #1            */
+#define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB                    */
+
+#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
+#define PHYS_FLASH_SIZE		0x02000000	/* 32 MB                    */
+
+#define CFG_DRAM_BASE		0xa0000000	/* RAM starts here          */
+#define CFG_DRAM_SIZE		0x02000000
+
+#define CFG_FLASH_BASE          PHYS_FLASH_1
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPSR0_VAL       0xFFFFFFFF
+#define CFG_GPSR1_VAL       0xFFFFFFFF
+#define CFG_GPSR2_VAL       0xFFFFFFFF
+#define CFG_GPCR0_VAL       0x08022080
+#define CFG_GPCR1_VAL       0x00000000
+#define CFG_GPCR2_VAL       0x00000000
+#define CFG_GPDR0_VAL       0xCD82A858
+#define CFG_GPDR1_VAL       0xFCFFAB80
+#define CFG_GPDR2_VAL       0x0001FFFF
+#define CFG_GAFR0_L_VAL     0x80000000
+#define CFG_GAFR0_U_VAL     0xA5254010
+#define CFG_GAFR1_L_VAL     0x599A9550
+#define CFG_GAFR1_U_VAL     0xAAA5AAAA
+#define CFG_GAFR2_L_VAL     0xAAAAAAAA
+#define CFG_GAFR2_U_VAL     0x00000002
+
+/* FIXME: set GPIO_RER/FER */
+
+#define CFG_PSSR_VAL        0x20
+
+/*
+ * Memory settings
+ */
+#define CFG_MSC0_VAL        0x2EF025D0
+#define CFG_MSC1_VAL        0x00003F64
+#define CFG_MSC2_VAL        0x00000000
+#define CFG_MDCNFG_VAL      0x09a909a9
+#define CFG_MDREFR_VAL      0x03ca0030
+/* #define CFG_MDREFR_VAL_100  ??? */
+#define CFG_MDMRS_VAL       0x00220022
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL        0x00000000
+#define CFG_MCMEM0_VAL      0x00000000
+#define CFG_MCMEM1_VAL      0x00000000
+#define CFG_MCATT0_VAL      0x00000000
+#define CFG_MCATT1_VAL      0x00000000
+#define CFG_MCIO0_VAL       0x00000000
+#define CFG_MCIO1_VAL       0x00000000
+
+/*
+#define _LED        0x08000010
+#define LED_BLANK  (0x08000040)
+*/
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS     1	/* max number of memory banks       */
+#define CFG_MAX_FLASH_SECT	128	/* max number of sect. on one chip  */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase       */
+#define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write       */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)
+					/* Addr of Environment Sector       */
+#define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector */
+
+#endif  /* __CONFIG_H */
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
new file mode 100644
index 00000000000..0e9a4ec90e2
--- /dev/null
+++ b/include/configs/gw8260.h
@@ -0,0 +1,820 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jmonkman@adventnetworks.com>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Oliver Brown <obrown@adventnetworks.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*********************************************************************/
+/* DESCRIPTION:
+ *   This file contains the board configuartion for the GW8260 board.
+ *
+ * MODULE DEPENDENCY:
+ *   None
+ *
+ * RESTRICTIONS/LIMITATIONS:
+ *   None
+ *
+ * Copyright (c) 2001, Advent Networks, Inc.
+ */
+/*********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Enable debug prints */
+#undef DEBUG                  /* General debug */
+#undef DEBUG_BOOTP_EXT        /* Debug received vendor fields */
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
+
+/*-----------------------------------------------------------------------
+ * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
+ *-----------------------------------------------------------------------
+ * What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Here are some example values (all frequencies are in MHz):
+ *
+ * MODCK_H   MODCK[1-3]  Osc    CPM    Core  S2-6   S2-7   S2-8
+ * -------   ----------  ---    ---    ----  -----  -----  -----
+ * 0x5       0x5     66 133     133    Open  Close  Open
+ * 0x5       0x6     66 133     166    Open  Open   Close
+ * 0x5       0x7     66 133     200    Open  Open   Open
+ * 0x6       0x0     66 133     233    Close Close  Close
+ * 0x6       0x1     66 133     266    Close Close  Open
+ * 0x6       0x2     66 133     300    Close Open   Close
+ */
+#define CFG_SBC_MODCK_H 0x05
+
+/* Define this if you want to boot from 0x00000100. If you don't define
+ * this, you will need to program the bootloader to 0xfff00000, and
+ * get the hardware reset config words at 0xfe000000. The simplest
+ * way to do that is to program the bootloader at both addresses.
+ * It is suggested that you just let U-Boot live at 0x00000000.
+ */
+#define CFG_SBC_BOOT_LOW 1
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * The main FLASH is whichever is connected to *CS0. U-Boot expects
+ * this to be the SIMM.
+ */
+#define CFG_FLASH0_BASE 0x40000000
+#define CFG_FLASH0_SIZE 8
+
+/* Define CFG_FLASH_CHECKSUM to enable flash checksum during boot.
+ * Note: the 'flashchecksum' environment variable must also be set to 'y'.
+ */
+#define CFG_FLASH_CHECKSUM
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?
+ */
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 64
+
+/*
+ * DRAM tests
+ *   CFG_DRAM_TEST - enables the following tests.
+ *
+ *   CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ *                        Environment variable 'test_dram_data' must be
+ *                        set to 'y'.
+ *   CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
+ *                        addressable. Environment variable
+ *                        'test_dram_address' must be set to 'y'.
+ *   CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ *                        This test takes about 6 minutes to test 64 MB.
+ *                        Environment variable 'test_dram_walk' must be
+ *                        set to 'y'.
+ */
+#define CFG_DRAM_TEST
+#if defined(CFG_DRAM_TEST)
+#define CFG_DRAM_TEST_DATA
+#define CFG_DRAM_TEST_ADDRESS
+#define CFG_DRAM_TEST_WALK
+#endif /* CFG_DRAM_TEST */
+
+/*
+ * GW8260 with 16 MB DIMM:
+ *
+ *     0x0000 0000     Exception Vector code, 8k
+ *           :
+ *     0x0000 1FFF
+ *     0x0000 2000     Free for Application Use
+ *           :
+ *           :
+ *
+ *           :
+ *           :
+ *     0x00F5 FF30     Monitor Stack (Growing downward)
+ *                     Monitor Stack Buffer (0x80)
+ *     0x00F5 FFB0     Board Info Data
+ *     0x00F6 0000     Malloc Arena
+ *           :          CFG_ENV_SECT_SIZE, 256k
+ *           :          CFG_MALLOC_LEN,    128k
+ *     0x00FC 0000     RAM Copy of Monitor Code
+ *           :              CFG_MONITOR_LEN,   256k
+ *     0x00FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+/*
+ * GW8260 with 64 MB DIMM:
+ *
+ *     0x0000 0000     Exception Vector code, 8k
+ *           :
+ *     0x0000 1FFF
+ *     0x0000 2000     Free for Application Use
+ *           :
+ *           :
+ *
+ *           :
+ *           :
+ *     0x03F5 FF30     Monitor Stack (Growing downward)
+ *                     Monitor Stack Buffer (0x80)
+ *     0x03F5 FFB0     Board Info Data
+ *     0x03F6 0000     Malloc Arena
+ *           :          CFG_ENV_SECT_SIZE, 256k
+ *           :          CFG_MALLOC_LEN,    128k
+ *     0x03FC 0000     RAM Copy of Monitor Code
+ *           :              CFG_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ */
+#define CONFIG_CONS_ON_SMC  1   /* define if console on SMC */
+#undef  CONFIG_CONS_ON_SCC      /* define if console on SCC */
+#undef  CONFIG_CONS_NONE        /* define if console on neither */
+#define CONFIG_CONS_INDEX   1   /* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+
+#undef  CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_ON_FCC
+#undef  CONFIG_ETHER_NONE       /* define if ethernet on neither */
+
+#ifdef  CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_INDEX  1   /* which SCC/FCC channel for ethernet */
+#endif  /* CONFIG_ETHER_ON_SCC */
+
+#ifdef  CONFIG_ETHER_ON_FCC
+#define CONFIG_ETHER_INDEX  2   /* which SCC/FCC channel for ethernet */
+#define CONFIG_MII              /* MII PHY management           */
+#define CONFIG_BITBANGMII       /* bit-bang MII PHY management  */
+/*
+ * Port pins used for bit-banged MII communictions (if applicable).
+ */
+#define MDIO_PORT   2       /* Port C */
+#define MDIO_ACTIVE    (iop->pdir |=  0x00400000)
+#define MDIO_TRISTATE  (iop->pdir &= ~0x00400000)
+#define MDIO_READ     ((iop->pdat &  0x00400000) != 0)
+
+#define MDIO(bit)   if(bit) iop->pdat |=  0x00400000; \
+            else            iop->pdat &= ~0x00400000
+
+#define MDC(bit)    if(bit) iop->pdat |=  0x00200000; \
+            else    iop->pdat &= ~0x00200000
+
+#define MIIDELAY    udelay(1)
+#endif  /* CONFIG_ETHER_ON_FCC */
+
+#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
+
+/*
+ * - Rx-CLK is CLK15
+ * - Tx-CLK is CLK16
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
+
+/* Define this to reserve an entire FLASH sector (256 KB) for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* What should the console's baud rate be? */
+#define CONFIG_BAUDRATE     115200
+
+/* Ethernet MAC address - This is set to all zeros to force an
+ *                        an error if we use BOOTP without setting
+ *                        the MAC address
+ */
+#define CONFIG_ETHADDR      00:00:00:00:00:00
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY    5   /* autoboot after 5 seconds */
+
+/* Be selective on what keys can delay or stop the autoboot process
+ *     To stop  use: " "
+ */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT  "Autobooting in %d seconds, press \" \" to stop\n"
+#define CONFIG_AUTOBOOT_STOP_STR    " "
+#undef  CONFIG_AUTOBOOT_DELAY_STR
+#define DEBUG_BOOTKEYS      0
+
+/* Add support for a few extra bootp options like:
+ *  - File size
+ *  - DNS
+ */
+#define CONFIG_BOOTP_MASK   (CONFIG_BOOTP_DEFAULT | \
+                             CONFIG_BOOTP_BOOTFILESIZE | \
+                             CONFIG_BOOTP_DNS)
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT      "=> "
+
+/* What U-Boot subsytems do you want enabled? */
+#define CONFIG_COMMANDS     (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+                               CFG_CMD_BEDBUG  | \
+                               CFG_CMD_ELF | \
+                               CFG_CMD_ASKENV  | \
+                               CFG_CMD_ECHO    | \
+                               CFG_CMD_REGINFO | \
+                               CFG_CMD_IMMAP   | \
+                               CFG_CMD_MII)
+
+/* Where do the internal registers live? */
+#define CFG_IMMR        0xf0000000
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* What is the address of IO controller */
+#define CFG_IO_BASE 0xe0000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260      1   /* This is an MPC8260 CPU   */
+#define CONFIG_GW8260       1   /* on an GW8260 Board  */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CBSIZE        1024    /* Console I/O Buffer Size       */
+#else
+#  define CFG_CBSIZE        256     /* Console I/O Buffer Size       */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE    (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS     8          /* max number of command args   */
+
+#define CFG_BARGSIZE    CFG_CBSIZE /* Boot Argument Buffer Size    */
+
+/* Convert clocks to MHZ when passing board info to kernel.
+ * This must be defined for eariler 2.4 kernels (~2.4.4).
+ */
+#define CONFIG_CLOCKS_IN_MHZ
+
+#define CFG_LOAD_ADDR   0x100000 /* default load address */
+#define CFG_HZ          1000     /* decrementer freq: 1 ms ticks */
+
+
+/* memtest works from the end of the exception vector table
+ * to the end of the DRAM less monitor and malloc area
+ */
+#define CFG_MEMTEST_START   0x2000
+
+#define CFG_STACK_USAGE     0x10000 /* Reserve 64k for the stack usage */
+
+#define CFG_MEM_END_USAGE   ( CFG_MONITOR_LEN \
+                            + CFG_MALLOC_LEN \
+                            + CFG_ENV_SECT_SIZE \
+                            + CFG_STACK_USAGE )
+
+#define CFG_MEMTEST_END     ( CFG_SDRAM_SIZE * 1024 * 1024 \
+                            - CFG_MEM_END_USAGE )
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_FLASH_BASE  CFG_FLASH0_BASE
+#define CFG_FLASH_SIZE  CFG_FLASH0_SIZE
+#define CFG_SDRAM_BASE  CFG_SDRAM0_BASE
+#define CFG_SDRAM_SIZE  CFG_SDRAM0_SIZE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+#if defined(CFG_SBC_BOOT_LOW)
+#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#else
+#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CFG_SBC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+#define CFG_SBC_HRCW_IMMR   ( ((CFG_IMMR & 0x10000000) >> 10) | \
+                  ((CFG_IMMR & 0x01000000) >>  7) | \
+                  ((CFG_IMMR & 0x00100000) >>  4) )
+
+#define CFG_HRCW_MASTER     ( HRCW_BPS11                | \
+                  HRCW_DPPC11               | \
+                  CFG_SBC_HRCW_IMMR         | \
+                  HRCW_MMR00                | \
+                  HRCW_LBPC11               | \
+                  HRCW_APPC10               | \
+                  HRCW_CS10PC00             | \
+                  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)  | \
+                  CFG_SBC_HRCW_BOOT_FLAGS )
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1     0
+#define CFG_HRCW_SLAVE2     0
+#define CFG_HRCW_SLAVE3     0
+#define CFG_HRCW_SLAVE4     0
+#define CFG_HRCW_SLAVE5     0
+#define CFG_HRCW_SLAVE6     0
+#define CFG_HRCW_SLAVE7     0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR    CFG_IMMR
+#define CFG_INIT_RAM_END     0x4000  /* End of used area in DPRAM    */
+#define CFG_GBL_DATA_SIZE   128 /* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET   CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE    CFG_FLASH0_BASE
+
+#define CFG_MONITOR_LEN     (256 * 1024) /* Reserve 256 kB for Monitor   */
+#define CFG_MALLOC_LEN      (128 * 1024) /* Reserve 128 kB for malloc()  */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ       (8 * 1024 * 1024) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS   1    /* max number of memory banks        */
+#define CFG_MAX_FLASH_SECT    32   /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT  8000 /* Timeout for Flash Erase (in ms)   */
+#define CFG_FLASH_WRITE_TOUT  1    /* Timeout for Flash Write (in ms)   */
+
+#define CFG_ENV_IS_IN_FLASH   1
+
+#ifdef CFG_ENV_IN_OWN_SECT
+#  define CFG_ENV_ADDR        (CFG_MONITOR_BASE +  (256 * 1024))
+#  define CFG_ENV_SECT_SIZE   (256 * 1024)
+#else
+#  define CFG_ENV_SIZE        (16 * 1024)/* Size of Environment Sector  */
+#  define CFG_ENV_ADD  ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) - CFG_ENV_SIZE)
+#  define CFG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size  */
+#endif /* CFG_ENV_IN_OWN_SECT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE  32      /* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT    5   /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers            2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT   (HID0_ICE  |\
+                         HID0_DCE  |\
+                         HID0_ICFI |\
+                         HID0_DCI  |\
+                         HID0_IFEM |\
+                         HID0_ABE)
+
+#define CFG_HID0_FINAL  (HID0_ICE  |\
+                         HID0_IFEM |\
+                         HID0_ABE  |\
+                         HID0_EMCP)
+#define CFG_HID2    0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR     0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration                           4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR     (BCR_ETM)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration                 4-31
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SIUMCR  (SIUMCR_DPPC11  |\
+                     SIUMCR_L2CPC00 |\
+                     SIUMCR_APPC10  |\
+                     SIUMCR_MMR00)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control                11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#define CFG_SYPCR   (SYPCR_SWTC |\
+                     SYPCR_BMT  |\
+                     SYPCR_PBME |\
+                     SYPCR_LBME |\
+                     SYPCR_SWRI |\
+                     SYPCR_SWP)
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control             4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC (TMCNTSC_SEC |\
+                     TMCNTSC_ALR |\
+                     TMCNTSC_TCF |\
+                     TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control         4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR   (PISCR_PS  |\
+                     PISCR_PTF |\
+                     PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control                           9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR    0
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration                 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR    0
+
+/*
+ * Initialize Memory Controller:
+ *
+ * Bank Bus   Machine PortSz  Device
+ * ---- ---   ------- ------  ------
+ *  0   60x   GPCM    32 bit  FLASH (SIMM - 4MB)
+ *  1   60x   GPCM    32 bit  unused
+ *  2   60x   SDRAM   64 bit  SDRAM (DIMM - 16MB or 64MB)
+ *  3   60x   SDRAM   64 bit  unused
+ *  4   Local GPCM     8 bit  IO    (on board - 64k)
+ *  5   60x   GPCM     8 bit  unused
+ *  6   60x   GPCM     8 bit  unused
+ *  7   60x   GPCM     8 bit  unused
+ *
+ */
+
+/*-----------------------------------------------------------------------
+ * BR0 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR0 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 0,1 - FLASH SIMM
+ *
+ * This expects the FLASH SIMM to be connected to *CS0
+ * It consists of 4 AM29F016D parts.
+ *
+ * Note: For the 8 MB SIMM, *CS1 is unused.
+ */
+
+/* BR0 is configured as follows:
+ *
+ *     - Base address of 0x40000000
+ *     - 32 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR0_PRELIM  ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+                          BRx_PS_32                     |\
+                          BRx_MS_GPCM_P                 |\
+                          BRx_V)
+
+/* OR0 is configured as follows:
+ *
+ *     - 8 MB
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 5
+ *     - *PSDVAL is generated internally by the memory controller
+ *       unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *       initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *       current bank and the next access.
+ */
+#define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH0_SIZE) |\
+                         ORxG_CSNT          |\
+                         ORxG_ACS_DIV1      |\
+                         ORxG_SCY_5_CLK     |\
+                         ORxG_TRLX          |\
+                         ORxG_EHTR)
+
+/*-----------------------------------------------------------------------
+ * BR2 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR2 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 2 - SDRAM DIMM
+ *
+ *     16MB DIMM: P/N
+ *     64MB DIMM: P/N  1W-8864X8-4-P1-EST or
+ *                     MT4LSDT864AG-10EB1 (Micron)
+ *
+ * Note: *CS3 is unused for this DIMM
+ */
+
+/* With a 16 MB or 64 MB DIMM, the BR2 is configured as follows:
+ *
+ *     - Base address of 0x00000000
+ *     - 64 bit port size (60x bus only)
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - SDRAM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR2_PRELIM  ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+                          BRx_PS_64          |\
+                          BRx_MS_SDRAM_P     |\
+                          BRx_V)
+
+/* With a 16 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 16 MB
+ *     - 2 internal banks per device
+ *     - Row start address bit is A9 with PSDMR[PBI] = 0
+ *     - 11 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 16)
+#define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+                         ORxS_BPD_2         |\
+                         ORxS_ROWST_PBI0_A9 |\
+                         ORxS_NUMR_11)
+
+/* With a 16 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Page Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *       (A6 on A15, and so on),
+ *     - use address pins A16-A18 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *       is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *       2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+#define CFG_PSDMR   (PSDMR_RFEN       |\
+                     PSDMR_SDAM_A14_IS_A5 |\
+                     PSDMR_BSMA_A16_A18   |\
+                     PSDMR_SDA10_PBI0_A9  |\
+                     PSDMR_RFRC_7_CLK     |\
+                     PSDMR_PRETOACT_3W    |\
+                     PSDMR_ACTTORW_2W     |\
+                     PSDMR_LDOTOPRE_1C    |\
+                     PSDMR_WRC_1C         |\
+                     PSDMR_CL_2)
+#endif /* (CFG_SDRAM0_SIZE == 16) */
+
+/* With a 64 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 64 MB
+ *     - 4 internal banks per device
+ *     - Row start address bit is A8 with PSDMR[PBI] = 0
+ *     - 12 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 64)
+#define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+             ORxS_BPD_4         |\
+             ORxS_ROWST_PBI0_A8     |\
+             ORxS_NUMR_12)
+
+/* With a 64 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Page Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *       (A6 on A15, and so on),
+ *     - use address pins A14-A16 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *       is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *       2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+#define CFG_PSDMR   (PSDMR_RFEN       |\
+                     PSDMR_SDAM_A14_IS_A5 |\
+                     PSDMR_BSMA_A14_A16   |\
+                     PSDMR_SDA10_PBI0_A9  |\
+                     PSDMR_RFRC_7_CLK     |\
+                     PSDMR_PRETOACT_3W    |\
+                     PSDMR_ACTTORW_2W     |\
+                     PSDMR_LDOTOPRE_1C    |\
+                     PSDMR_WRC_1C         |\
+                     PSDMR_CL_2)
+#endif  /* (CFG_SDRAM0_SIZE == 64) */
+
+#define CFG_PSRT    0x0e
+#define CFG_MPTPR   MPTPR_PTP_DIV32
+
+
+/*-----------------------------------------------------------------------
+ * BR4 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR4 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+/* Bank 4 - Onboard Memory Mapped IO controller
+ *
+ * This expects the onboard IO controller to connected to *CS4 and
+ * the local bus.
+ *     - Base address of 0xe0000000
+ *     - 8 bit port size (local bus only)
+ *     - Read and write access
+ *     - GPCM local bus
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ *     - extended hold time
+ *     - 11 wait states
+ */
+
+#ifdef CFG_IO_BASE
+#  define CFG_BR4_PRELIM  ((CFG_IO_BASE & BRx_BA_MSK)  |\
+                            BRx_PS_8                   |\
+                            BRx_MS_GPCM_L              |\
+                            BRx_V)
+
+#  define CFG_OR4_PRELIM   (ORxG_AM_MSK                |\
+                            ORxG_SCY_11_CLK            |\
+                            ORxG_EHTR)
+#endif /* CFG_IO_BASE */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM   0x02    /* Software reboot           */
+
+#endif  /* __CONFIG_H */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
new file mode 100644
index 00000000000..580b590e172
--- /dev/null
+++ b/include/configs/ppmc8260.h
@@ -0,0 +1,1004 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * Configuation settings for the WindRiver PPMC8260 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*****************************************************************************
+ *
+ * These settings must match the way _your_ board is set up
+ *
+ *****************************************************************************/
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
+
+/*-----------------------------------------------------------------------
+ * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
+ *-----------------------------------------------------------------------
+ * What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Here are some example values (all frequencies are in MHz):
+ *
+ * MODCK_H   MODCK[1-3]	 Osc	CPM    Core  S2-6   S2-7   S2-8
+ * -------   ----------	 ---	---    ----  -----  -----  -----
+ * 0x2	     0x2	 33	133    133   Close  Open   Close
+ * 0x2	     0x3	 33	133    166   Close  Open   Open
+ * 0x2	     0x4	 33	133    200   Open   Close  Close
+ * 0x2	     0x5	 33	133    233   Open   Close  Open
+ * 0x2	     0x6	 33	133    266   Open   Open   Close
+ *
+ * 0x5	     0x5	 66	133    133   Open   Close  Open
+ * 0x5	     0x6	 66	133    166   Open   Open   Close
+ * 0x5	     0x7	 66	133    200   Open   Open   Open
+ * 0x6	     0x0	 66	133    233   Close  Close  Close
+ * 0x6	     0x1	 66	133    266   Close  Close  Open
+ * 0x6	     0x2	 66	133    300   Close  Open   Close
+ */
+#define CFG_PPMC_MODCK_H 0x05
+
+/* Define this if you want to boot from 0x00000100. If you don't define
+ * this, you will need to program the bootloader to 0xfff00000, and
+ * get the hardware reset config words at 0xfe000000. The simplest
+ * way to do that is to program the bootloader at both addresses.
+ * It is suggested that you just let U-Boot live at 0x00000000.
+ */
+#define CFG_PPMC_BOOT_LOW 1
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/ppmc8260/config.mk
+ * The main FLASH is whichever is connected to *CS0. U-Boot expects
+ * this to be the SIMM.
+ */
+#define CFG_FLASH0_BASE 0xFE000000
+#define CFG_FLASH0_SIZE 16
+
+/* What should be the base address of the first SDRAM DIMM and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 128
+
+/* What should be the base address of the second SDRAM DIMM and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM1_BASE 0x08000000
+#define CFG_SDRAM1_SIZE 128
+
+/* What should be the base address of the on board SDRAM and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM2_BASE 0x38000000
+#define CFG_SDRAM2_SIZE 16
+
+/* What should be the base address of the MAILBOX  and how big is it
+ * (in Bytes)
+ * The eeprom lives at CFG_MAILBOX_BASE + 0x80000000
+ */
+#define CFG_MAILBOX_BASE 0x32000000
+#define CFG_MAILBOX_SIZE 8192
+
+/* What is the base address of the I/O select lines and how big is it
+ * (In Mbytes)?
+ */
+
+#define CFG_IOSELECT_BASE 0xE0000000
+#define CFG_IOSELECT_SIZE 32
+
+
+/* What should be the base address of the LEDs and switch S0?
+ * If you don't want them enabled, don't define this.
+ */
+#define CFG_LED_BASE 0xF1000000
+
+/*
+ * PPMC8260 with 256 16 MB DIMM:
+ *
+ *     0x0000 0000     Exception Vector code, 8k
+ *	     :
+ *     0x0000 1FFF
+ *     0x0000 2000     Free for Application Use
+ *	     :
+ *	     :
+ *
+ *	     :
+ *	     :
+ *     0x0FF5 FF30     Monitor Stack (Growing downward)
+ *		       Monitor Stack Buffer (0x80)
+ *     0x0FF5 FFB0     Board Info Data
+ *     0x0FF6 0000     Malloc Arena
+ *	     :		    CFG_ENV_SECT_SIZE, 256k
+ *	     :		    CFG_MALLOC_LEN,    128k
+ *     0x0FFC 0000     RAM Copy of Monitor Code
+ *	     :		    CFG_MONITOR_LEN,   256k
+ *     0x0FFF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ * The console can be on SMC1 or SMC2
+ */
+#define CONFIG_CONS_ON_SMC	1	/* define if console on SMC */
+#undef	CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on neither */
+#define CONFIG_CONS_INDEX	1	/* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+
+#undef	CONFIG_ETHER_ON_SCC		/* define if ethernet on SCC	*/
+#define CONFIG_ETHER_ON_FCC		/* define if ethernet on FCC	*/
+#undef	CONFIG_ETHER_NONE		/* define if ethernet on neither */
+#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
+#define CONFIG_MII			/* MII PHY management	*/
+#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+/*
+ * Port pins used for bit-banged MII communictions (if applicable).
+ */
+#define MDIO_PORT	2	/* Port C */
+#define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
+#define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
+#define MDIO_READ	((iop->pdat &  0x00400000) != 0)
+
+#define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
+			else	iop->pdat &= ~0x00400000
+
+#define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
+			else	iop->pdat &= ~0x00200000
+
+#define MIIDELAY	udelay(1)
+
+
+/* Define this to reserve an entire FLASH sector (256 KB) for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT	1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* What should the console's baud rate be? */
+#define CONFIG_BAUDRATE		9600
+
+/* Ethernet MAC address */
+
+#define CONFIG_ETHADDR		00:a0:1e:90:2b:00
+
+/* Define this to set the last octet of the ethernet address
+ * from the DS0-DS7 switch and light the leds with the result
+ * The DS0-DS7 switch and the leds are backwards with respect
+ * to each other. DS7 is on the board edge side of both the
+ * led strip and the DS0-DS7 switch.
+ */
+#define CONFIG_MISC_INIT_R
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#if 0
+/* Be selective on what keys can delay or stop the autoboot process
+ *     To stop	use: " "
+ */
+# define CONFIG_AUTOBOOT_KEYED
+# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+# define CONFIG_AUTOBOOT_STOP_STR	" "
+# undef CONFIG_AUTOBOOT_DELAY_STR
+# define DEBUG_BOOTKEYS		0
+#endif
+
+/* Define a command string that is automatically executed when no character
+ * is read on the console interface withing "Boot Delay" after reset.
+ */
+#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
+#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+
+#if CONFIG_BOOT_ROOT_INITRD
+#define CONFIG_BOOTCOMMAND \
+	"version;" \
+	"echo;" \
+	"bootp;" \
+	"setenv bootargs root=/dev/ram0 rw " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"bootm"
+#endif /* CONFIG_BOOT_ROOT_INITRD */
+
+#if CONFIG_BOOT_ROOT_NFS
+#define CONFIG_BOOTCOMMAND \
+	"version;" \
+	"echo;" \
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"bootm"
+#endif /* CONFIG_BOOT_ROOT_NFS */
+
+/* Add support for a few extra bootp options like:
+ *	- File size
+ *	- DNS
+ */
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
+				 CONFIG_BOOTP_BOOTFILESIZE | \
+				 CONFIG_BOOTP_DNS)
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT		"=> "
+
+/* What U-Boot subsytems do you want enabled? */
+#define CONFIG_COMMANDS		(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+				CFG_CMD_ELF	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_MEMTEST | \
+				CFG_CMD_MII	| \
+				CFG_CMD_IMMAP)
+
+
+/* Where do the internal registers live? */
+#define CFG_IMMR		0xf0000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
+#define CONFIG_PPMC8260		1	/* on an Wind River PPMC8260 Board  */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#else
+#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS		32	/* max number of command args	*/
+
+#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+
+#define CFG_LOAD_ADDR		0x140000   /* default load address */
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+					/* the exception vector table */
+					/* to the end of the DRAM  */
+					/* less monitor and malloc area */
+#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
+				+ CFG_MALLOC_LEN \
+				+ CFG_ENV_SECT_SIZE \
+				+ CFG_STACK_USAGE )
+
+#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
+				- CFG_MEM_END_USAGE )
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
+/*
+ *  Attention: This is board specific
+ *  - RX clk is CLK11
+ *  - TX clk is CLK12
+ */
+#define CFG_CMXSCR_VALUE       (CMXSCR_RS1CS_CLK11  |\
+				CMXSCR_TS1CS_CLK12)
+
+#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+/*
+ * Attention: this is board-specific
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+#define CFG_CMXFCR_MASK		(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+#define CFG_CPMFCR_RAMTYPE	0
+#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+#endif	/* CONFIG_ETHER_INDEX */
+
+#define CFG_FLASH_BASE	CFG_FLASH0_BASE
+#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
+#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
+#define CFG_SDRAM_SIZE	(CFG_SDRAM0_SIZE + CFG_SDRAM1_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+#if defined(CFG_PPMC_BOOT_LOW)
+#  define  CFG_PPMC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#else
+#  define  CFG_PPMC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CFG_PPMC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+#define CFG_PPMC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
+				  ((CFG_IMMR & 0x01000000) >>  7) | \
+				  ((CFG_IMMR & 0x00100000) >>  4) )
+
+#define CFG_HRCW_MASTER		( HRCW_EBM				| \
+				  HRCW_BPS11				| \
+				  HRCW_L2CPC10				| \
+				  HRCW_DPPC00				| \
+				  CFG_PPMC_HRCW_IMMR			| \
+				  HRCW_MMR00				| \
+				  HRCW_LBPC00				| \
+				  HRCW_APPC10				| \
+				  HRCW_CS10PC00				| \
+				  (CFG_PPMC_MODCK_H & HRCW_MODCK_H1111) | \
+				  CFG_PPMC_HRCW_BOOT_FLAGS )
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1		0
+#define CFG_HRCW_SLAVE2		0
+#define CFG_HRCW_SLAVE3		0
+#define CFG_HRCW_SLAVE4		0
+#define CFG_HRCW_SLAVE5		0
+#define CFG_HRCW_SLAVE6		0
+#define CFG_HRCW_SLAVE7		0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+
+#ifndef CFG_MONITOR_BASE
+#define CFG_MONITOR_BASE	0x0ff80000
+#endif
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#  define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 374 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#define CFG_MAX_FLASH_SECT	128	/* max number of sectors on one chip	*/
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_FLASH_INCREMENT	0	/* there is only one bank		*/
+#define CFG_FLASH_PROTECTION	1	/* use hardware protection		*/
+#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
+
+
+#ifndef CFG_RAMBOOT
+
+#  define CFG_ENV_IS_IN_FLASH	1
+#  ifdef CFG_ENV_IN_OWN_SECT
+#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
+#    define CFG_ENV_SECT_SIZE	0x40000
+#  else
+#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
+#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
+#    define CFG_ENV_SECT_SIZE	0x40000 /* see README - env sect real size	*/
+#  endif /* CFG_ENV_IN_OWN_SECT */
+
+#else
+#  define CFG_ENV_IS_IN_FLASH	1
+#  define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x40000)
+#define CFG_ENV_SIZE		0x1000
+#  define CFG_ENV_SECT_SIZE	0x40000
+#endif /* CFG_RAMBOOT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers			 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT	(HID0_ICE  |\
+			 HID0_DCE  |\
+			 HID0_ICFI |\
+			 HID0_DCI  |\
+			 HID0_IFEM |\
+			 HID0_ABE)
+
+#define CFG_HID0_FINAL	(HID0_ICE  |\
+			 HID0_IFEM |\
+			 HID0_ABE  |\
+			 HID0_EMCP)
+#define CFG_HID2	0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR		0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration					 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR		(BCR_EBM      |\
+			 0x30000000)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				 4-31
+ * Ref Section 4.3.2.6	page 4-31
+ *-----------------------------------------------------------------------
+ */
+
+#define CFG_SIUMCR	(SIUMCR_ESE	 |\
+			 SIUMCR_DPPC00	 |\
+			 SIUMCR_L2CPC10	 |\
+			 SIUMCR_LBPC00	 |\
+			 SIUMCR_APPC10	 |\
+			 SIUMCR_CS10PC00 |\
+			 SIUMCR_BCTLC00	 |\
+			 SIUMCR_MMR00)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#define CFG_SYPCR	(SYPCR_SWTC |\
+			 SYPCR_BMT  |\
+			 SYPCR_PBME |\
+			 SYPCR_LBME |\
+			 SYPCR_SWRI |\
+			 SYPCR_SWP)
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control			 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+			 TMCNTSC_ALR |\
+			 TMCNTSC_TCF |\
+			 TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR	(PISCR_PS  |\
+			 PISCR_PTF |\
+			 PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control					 9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR	0
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration				13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR	0
+
+/*
+ * Initialize Memory Controller:
+ *
+ * Bank Bus	Machine PortSz	Device
+ * ---- ---	------- ------	------
+ *  0	60x	GPCM	32 bit	FLASH (SIMM - 32MB) *
+ *  1	unused
+ *  2	60x	SDRAM	64 bit	SDRAM (DIMM - 128MB)
+ *  3	60x	SDRAM	64 bit	SDRAM (DIMM - 128MB)
+ *  4	Local	SDRAM	32 bit	SDRAM (on board - 16MB)
+ *  5	60x	GPCM	 8 bit	Mailbox/EEPROM (8KB)
+ *  6	60x	GPCM	 8 bit	FLASH  (on board - 2MB) *
+ *  7	60x	GPCM	 8 bit	LEDs, switches
+ *
+ *  (*) This configuration requires the PPMC8260 be configured
+ *	so that *CS0 goes to the FLASH SIMM, and *CS6 goes to
+ *	the on board FLASH. In other words, JP24 should have
+ *	pins 1 and 2 jumpered and pins 3 and 4 jumpered.
+ *
+ */
+
+/*-----------------------------------------------------------------------
+ * BR0,BR1 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR0,OR1 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 0,1 - FLASH SIMM
+ *
+ * This expects the FLASH SIMM to be connected to *CS0
+ * It consists of 4 AM29F080B parts.
+ *
+ * Note: For the 4 MB SIMM, *CS1 is unused.
+ */
+
+/* BR0 is configured as follows:
+ *
+ *     - Base address of 0xFE000000
+ *     - 32 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_32			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+/* OR0 is configured as follows:
+ *
+ *     - 32 MB
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 5
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxG_TRLX			|\
+			 ORxG_EHTR)
+
+/*-----------------------------------------------------------------------
+ * BR2,BR3 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR2,OR3 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/*
+ * Bank 2,3 - 128 MB SDRAM DIMM
+ */
+
+/* With a 128 MB DIMM, the BR2 is configured as follows:
+ *
+ *     - Base address of 0x00000000/0x08000000
+ *     - 64 bit port size (60x bus only)
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - SDRAM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+#define CFG_BR3_PRELIM	((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+/* With a 128 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 128 MB
+ *     - 4 internal banks per device
+ *     - Row start address bit is A8 with PSDMR[PBI] = 0
+ *     - 13 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+
+#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A7		|\
+			 ORxS_NUMR_13)
+
+#define CFG_OR3_PRELIM	(MEG_TO_AM(CFG_SDRAM1_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A7		|\
+			 ORxS_NUMR_13)
+
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+
+/* With a 128 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Page Based Interleaving,
+ *     - Refresh Enable,
+ *     - Normal Operation
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A13-A15 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - External Address Multiplexing enabled
+ *     - CAS Latency is 2.
+ */
+#define CFG_PSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A13_A15   |\
+			 PSDMR_SDA10_PBI0_A9  |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_3W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_EAMUX	      |\
+			 PSDMR_CL_2)
+
+
+#define CFG_PSRT	0x0e
+#define CFG_MPTPR	MPTPR_PTP_DIV32
+
+
+/*-----------------------------------------------------------------------
+ * BR4 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR4 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/*
+ * Bank 4 - On board SDRAM
+ *
+ */
+/* With 16 MB of onboard SDRAM	BR4 is configured as follows
+ *
+ *     - Base address 0x38000000
+ *     - 32 bit port size
+ *     - Data error checking disabled
+ *     - Read/Write access
+ *     - SDRAM local bus
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ *
+ */
+
+#define CFG_BR4_PRELIM	((CFG_SDRAM2_BASE & BRx_BA_MSK) |\
+			 BRx_PS_32			|\
+			 BRx_DECC_NONE			|\
+			 BRx_MS_SDRAM_L			|\
+			 BRx_V)
+
+/*
+ * With 16MB SDRAM, OR4 is configured as follows
+ *     - 4 internal banks per device
+ *     - Row start address bit is A10 with LSDMR[PBI] = 0
+ *     - 12 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+
+#define CFG_OR4_PRELIM	(MEG_TO_AM(CFG_SDRAM2_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A10		|\
+			 ORxS_NUMR_12)
+
+
+/*-----------------------------------------------------------------------
+ * LSDMR - Local Bus SDRAM Mode Register
+ *     Ref: Section 10.3.4 on page 10-24
+ *-----------------------------------------------------------------------
+ */
+
+/* With a 16 MB onboard SDRAM, the LSDMR is configured as follows:
+ *
+ *     - Page Based Interleaving,
+ *     - Refresh Enable,
+ *     - Normal Operation
+ *     - Address Multiplexing where A5 is output on A13 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A15-A17 as bank select,
+ *     - A11 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 2 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - SDRAM burst length is 8
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - External Address Multiplexing disabled
+ *     - CAS Latency is 2.
+ */
+#define CFG_LSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A13_IS_A5 |\
+			 PSDMR_BSMA_A15_A17   |\
+			 PSDMR_SDA10_PBI0_A11 |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_2W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_BL	      |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_CL_2)
+
+#define CFG_LSRT	0x0e
+
+/*-----------------------------------------------------------------------
+ * BR5 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR5 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/*
+ * Bank 5 EEProm and Mailbox
+ *
+ * The EEPROM and mailbox live on the same chip select.
+ * the eeprom is selected if the MSb of the address is set and the mailbox is
+ * selected if the MSb of the address is clear.
+ *
+ */
+
+/* BR5 is configured as follows:
+ *
+ *     - Base address of 0x32000000/0xF2000000
+ *     - 8 bit
+ *     - Data error checking disabled
+ *     - Read/Write access
+ *     - GPCM 60x Bus
+ *     - SDRAM local bus
+ *     - No data pipelining is done
+ *     - Valid
+ */
+
+#define CFG_BR5_PRELIM	((CFG_MAILBOX_BASE & BRx_BA_MSK) |\
+			 BRx_PS_8			 |\
+			 BRx_DECC_NONE			 |\
+			 BRx_MS_GPCM_P			 |\
+			 BRx_V)
+/* OR5 is configured as follows
+ *     - buffer control enabled
+ *     - chip select negated normally
+ *     - CS output 1/2 clock after address
+ *     - 15 wait states
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+
+#define CFG_OR5_PRELIM ((P2SZ_TO_AM(CFG_MAILBOX_SIZE) & ~0x80000000) |\
+			 ORxG_ACS_DIV2				     |\
+			 ORxG_SCY_15_CLK			     |\
+			 ORxG_TRLX				     |\
+			 ORxG_EHTR)
+
+/*-----------------------------------------------------------------------
+ * BR6 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR6 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 6 - I/O select
+ *
+ */
+
+/* BR6 is configured as follows:
+ *
+ *     - Base address of 0xE0000000
+ *     - 16 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR6_PRELIM	((CFG_IOSELECT_BASE & BRx_BA_MSK) |\
+			   BRx_PS_16			  |\
+			   BRx_MS_GPCM_P		  |\
+			   BRx_V)
+
+/* OR6 is configured as follows
+ *     - buffer control enabled
+ *     - chip select negated normally
+ *     - CS output 1/2 clock after address
+ *     - 15 wait states
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+
+#define CFG_OR6_PRELIM (MEG_TO_AM(CFG_IOSELECT_SIZE) |\
+			 ORxG_ACS_DIV2		     |\
+			 ORxG_SCY_15_CLK	     |\
+			 ORxG_TRLX		     |\
+			 ORxG_EHTR)
+
+
+/*-----------------------------------------------------------------------
+ * BR7 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR7 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 7 - LEDs and switches
+ *
+ *  LEDs     are at 0x00001 (write only)
+ *  switches are at 0x00001 (read only)
+ */
+#ifdef CFG_LED_BASE
+
+/* BR7 is configured as follows:
+ *
+ *     - Base address of 0xA0000000
+ *     - 8 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR7_PRELIM	((CFG_LED_BASE & BRx_BA_MSK)	 |\
+			   BRx_PS_8			 |\
+			   BRx_DECC_NONE		 |\
+			   BRx_MS_GPCM_P		 |\
+			   BRx_V)
+
+/* OR7 is configured as follows:
+ *
+ *     - 1 byte
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 15
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#define CFG_OR7_PRELIM	(ORxG_AM_MSK		       |\
+			 ORxG_CSNT		       |\
+			 ORxG_ACS_DIV1		       |\
+			 ORxG_SCY_15_CLK	       |\
+			 ORxG_TRLX		       |\
+			 ORxG_EHTR)
+#endif /* CFG_LED_BASE */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
new file mode 100644
index 00000000000..92cdcf08cb4
--- /dev/null
+++ b/include/configs/sacsng.h
@@ -0,0 +1,1000 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * Configuration settings for the WindRiver SBC8260 board.
+ *	See http://www.windriver.com/products/html/sbc8260.html
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Enable debug prints */
+#undef DEBUG		      /* General debug */
+#undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
+
+/*****************************************************************************
+ *
+ * These settings must match the way _your_ board is set up
+ *
+ *****************************************************************************/
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN  66666600
+
+/*-----------------------------------------------------------------------
+ * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
+ *-----------------------------------------------------------------------
+ * What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Here are some example values (all frequencies are in MHz):
+ *
+ * MODCK_H   MODCK[1-3]	 Osc	CPM    Core  S2-6   S2-7   S2-8
+ * -------   ----------	 ---	---    ----  -----  -----  -----
+ * 0x1	     0x5	 33	100    133   Open   Close  Open
+ * 0x1	     0x6	 33	100    166   Open   Open   Close
+ * 0x1	     0x7	 33	100    200   Open   Open   Open
+ *
+ * 0x2	     0x2	 33	133    133   Close  Open   Close
+ * 0x2	     0x3	 33	133    166   Close  Open   Open
+ * 0x2	     0x4	 33	133    200   Open   Close  Close
+ * 0x2	     0x5	 33	133    233   Open   Close  Open
+ * 0x2	     0x6	 33	133    266   Open   Open   Close
+ *
+ * 0x5	     0x5	 66	133    133   Open   Close  Open
+ * 0x5	     0x6	 66	133    166   Open   Open   Close
+ * 0x5	     0x7	 66	133    200   Open   Open   Open
+ * 0x6	     0x0	 66	133    233   Close  Close  Close
+ * 0x6	     0x1	 66	133    266   Close  Close  Open
+ * 0x6	     0x2	 66	133    300   Close  Open   Close
+ */
+#define CFG_SBC_MODCK_H 0x05
+
+/* Define this if you want to boot from 0x00000100. If you don't define
+ * this, you will need to program the bootloader to 0xfff00000, and
+ * get the hardware reset config words at 0xfe000000. The simplest
+ * way to do that is to program the bootloader at both addresses.
+ * It is suggested that you just let U-Boot live at 0x00000000.
+ */
+#define CFG_SBC_BOOT_LOW 1
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)?  This must contain TEXT_BASE from board/sacsng/config.mk
+ * The main FLASH is whichever is connected to *CS0.
+ */
+#define CFG_FLASH0_BASE 0x40000000
+#define CFG_FLASH0_SIZE 2
+
+/* What should the base address of the secondary FLASH be and how big
+ * is it (in Mbytes)?  The secondary FLASH is whichever is connected
+ * to *CS6.
+ */
+#define CFG_FLASH1_BASE 0x60000000
+#define CFG_FLASH1_SIZE 2
+
+/* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes
+ */
+#define CONFIG_VERY_BIG_RAM	1
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?  This will normally auto-configure via the SPD.
+*/
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 64
+
+/*
+ * Memory map example with 64 MB DIMM:
+ *
+ *     0x0000 0000     Exception Vector code, 8k
+ *	     :
+ *     0x0000 1FFF
+ *     0x0000 2000     Free for Application Use
+ *	     :
+ *	     :
+ *
+ *	     :
+ *	     :
+ *     0x03F5 FF30     Monitor Stack (Growing downward)
+ *		       Monitor Stack Buffer (0x80)
+ *     0x03F5 FFB0     Board Info Data
+ *     0x03F6 0000     Malloc Arena
+ *	     :		    CFG_ENV_SECT_SIZE, 16k
+ *	     :		    CFG_MALLOC_LEN,    128k
+ *     0x03FC 0000     RAM Copy of Monitor Code
+ *	     :		    CFG_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+#define CONFIG_POST		(CFG_POST_MEMORY | \
+				 CFG_POST_CPU)
+
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ */
+#define CONFIG_CONS_ON_SMC	1	/* define if console on SMC */
+#undef	CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on neither */
+#define CONFIG_CONS_INDEX	1	/* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+
+#undef	CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_ON_FCC
+#undef	CONFIG_ETHER_NONE		/* define if ethernet on neither */
+
+#ifdef	CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
+#endif	/* CONFIG_ETHER_ON_SCC */
+
+#ifdef	CONFIG_ETHER_ON_FCC
+#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
+#define CONFIG_MII			/* MII PHY management		*/
+#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+/*
+ * Port pins used for bit-banged MII communictions (if applicable).
+ */
+
+#define MDIO_PORT	2	        /* Port A=0, B=1, C=2, D=3 */
+#define MDIO_ACTIVE	(iop->pdir |=  0x40000000)
+#define MDIO_TRISTATE	(iop->pdir &= ~0x40000000)
+#define MDIO_READ	((iop->pdat &  0x40000000) != 0)
+
+#define MDIO(bit)	if(bit) iop->pdat |=  0x40000000; \
+			else	iop->pdat &= ~0x40000000
+
+#define MDC(bit)	if(bit) iop->pdat |=  0x80000000; \
+			else	iop->pdat &= ~0x80000000
+
+#define MIIDELAY	udelay(50)
+#endif	/* CONFIG_ETHER_ON_FCC */
+
+#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
+
+/*
+ *  - RX clk is CLK11
+ *  - TX clk is CLK12
+ */
+# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+
+#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1	/* boot progress enabled	*/
+
+/*
+ * Configure for RAM tests.
+ */
+#undef  CFG_DRAM_TEST			/* calls other tests in board.c	*/
+
+
+/*
+ * Status LED for power up status feedback.
+ */
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+
+#define STATUS_LED_PAR		im_ioport.iop_ppara
+#define STATUS_LED_DIR		im_ioport.iop_pdira
+#define STATUS_LED_ODR		im_ioport.iop_podra
+#define STATUS_LED_DAT		im_ioport.iop_pdata
+
+#define STATUS_LED_BIT		0x00000800	/* LED 0 is on PA.20	*/
+#define STATUS_LED_PERIOD	(CFG_HZ)
+#define STATUS_LED_STATE	STATUS_LED_OFF
+#define STATUS_LED_BIT1		0x00001000	/* LED 1 is on PA.19	*/
+#define STATUS_LED_PERIOD1	(CFG_HZ)
+#define STATUS_LED_STATE1	STATUS_LED_OFF
+#define STATUS_LED_BIT2		0x00002000	/* LED 2 is on PA.18	*/
+#define STATUS_LED_PERIOD2	(CFG_HZ/2)
+#define STATUS_LED_STATE2	STATUS_LED_ON
+
+#define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
+
+#define STATUS_LED_YELLOW	0
+#define STATUS_LED_GREEN	1
+#define STATUS_LED_RED		2
+#define STATUS_LED_BOOT		1
+
+
+/*
+ * select SPI support configuration
+ */
+#define  CONFIG_SOFT_SPI		/* enable SPI driver		*/
+
+/*
+ * Software (bit-bang) SPI driver configuration
+ */
+#ifdef CONFIG_SOFT_SPI
+
+/*
+ * Software (bit-bang) SPI driver configuration
+ */
+#define I2C_SCLK	0x00002000      /* PD 18: Shift clock */
+#define I2C_MOSI	0x00004000      /* PD 17: Master Out, Slave In */
+#define I2C_MISO	0x00008000      /* PD 16: Master In, Slave Out */
+
+#undef  SPI_INIT			/* no port initialization needed */
+#define SPI_READ        ((immr->im_ioport.iop_pdatd & I2C_MISO) != 0)
+#define SPI_SDA(bit)    if(bit) immr->im_ioport.iop_pdatd |=  I2C_MOSI; \
+                        else    immr->im_ioport.iop_pdatd &= ~I2C_MOSI
+#define SPI_SCL(bit)    if(bit) immr->im_ioport.iop_pdatd |=  I2C_SCLK; \
+                        else    immr->im_ioport.iop_pdatd &= ~I2C_SCLK
+#define SPI_DELAY	/*udelay(1)*/	/* 1/2 SPI clock duration */
+#endif /* CONFIG_SOFT_SPI */
+
+
+/*
+ * select I2C support configuration
+ *
+ * Supported configurations are {none, software, hardware} drivers.
+ * If the software driver is chosen, there are some additional
+ * configuration items that the driver uses to drive the port pins.
+ */
+#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#ifdef CONFIG_SOFT_I2C
+#define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE	(iop->pdir |=  0x00010000)
+#define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
+#define I2C_READ	((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
+			else    iop->pdat &= ~0x00010000
+#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
+			else    iop->pdat &= ~0x00020000
+#define I2C_DELAY	udelay(20)	/* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+/* Define this to reserve an entire FLASH sector for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT	1
+
+/* Define this to contain any number of null terminated strings that
+ * will be part of the default enviroment compiled into the boot image.
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+"serverip=192.168.123.201\0" \
+"ipaddr=192.168.123.203\0" \
+"checkhostname=VR8500\0" \
+"reprog="\
+    "tftpboot 0x140000 /bdi2000/u-boot.bin; " \
+    "protect off 60000000 6003FFFF; " \
+    "erase 60000000 6003FFFF; " \
+    "cp.b 140000 60000000 $(filesize); " \
+    "protect on 60000000 6003FFFF\0" \
+"copyenv="\
+    "protect off 60040000 6004FFFF; " \
+    "erase 60040000 6004FFFF; " \
+    "cp.b 40040000 60040000 10000; " \
+    "protect on 60040000 6004FFFF\0" \
+"copyprog="\
+    "protect off 60000000 6003FFFF; " \
+    "erase 60000000 6003FFFF; " \
+    "cp.b 40000000 60000000 40000; " \
+    "protect on 60000000 6003FFFF\0" \
+"zapenv="\
+    "protect off 40040000 4004FFFF; " \
+    "erase 40040000 4004FFFF; " \
+    "protect on 40040000 4004FFFF\0" \
+"zapotherenv="\
+    "protect off 60040000 6004FFFF; " \
+    "erase 60040000 6004FFFF; " \
+    "protect on 60040000 6004FFFF\0" \
+"root-on-initrd="\
+    "setenv bootcmd "\
+    "version\\;" \
+    "echo\\;" \
+    "bootp\\;" \
+    "setenv bootargs root=/dev/ram0 rw quiet " \
+    "ip=\\$(ipaddr):\\$(serverip):\\$(gatewayip):\\$(netmask):\\$(hostname)::off\\;" \
+    "run boot-hook\\;" \
+    "bootm\0" \
+"root-on-initrd-debug="\
+    "setenv bootcmd "\
+    "version\\;" \
+    "echo\\;" \
+    "bootp\\;" \
+    "setenv bootargs root=/dev/ram0 rw debug " \
+    "ip=\\$(ipaddr):\\$(serverip):\\$(gatewayip):\\$(netmask):\\$(hostname)::off\\;" \
+    "run debug-hook\\;" \
+    "run boot-hook\\;" \
+    "bootm\0" \
+"root-on-nfs="\
+    "setenv bootcmd "\
+    "version\\;" \
+    "echo\\;" \
+    "bootp\\;" \
+    "setenv bootargs root=/dev/nfs rw quiet " \
+    "nfsroot=\\$(serverip):\\$(rootpath) " \
+    "ip=\\$(ipaddr):\\$(serverip):\\$(gatewayip):\\$(netmask):\\$(hostname)::off\\;" \
+    "run boot-hook\\;" \
+    "bootm\0" \
+"root-on-nfs-debug="\
+    "setenv bootcmd "\
+    "version\\;" \
+    "echo\\;" \
+    "bootp\\;" \
+    "setenv bootargs root=/dev/nfs rw debug " \
+    "nfsroot=\\$(serverip):\\$(rootpath) " \
+    "ip=\\$(ipaddr):\\$(serverip):\\$(gatewayip):\\$(netmask):\\$(hostname)::off\\;" \
+    "run debug-hook\\;" \
+    "run boot-hook\\;" \
+    "bootm\0" \
+"debug-checkout="\
+    "setenv checkhostname;" \
+    "setenv ethaddr 00:09:70:00:00:01;" \
+    "bootp;" \
+    "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) debug " \
+    "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+    "run debug-hook;" \
+    "run boot-hook;" \
+    "bootm\0" \
+"debug-hook="\
+    "echo ipaddr    $(ipaddr);" \
+    "echo serverip  $(serverip);" \
+    "echo gatewayip $(gatewayip);" \
+    "echo netmask   $(netmask);" \
+    "echo hostname  $(hostname)\0" \
+"ana=run adc ; run dac\0" \
+"adc=run adc-12 ; run adc-34\0" \
+"adc-12=echo ### ADC-12 ; imd.b e 81 e\0" \
+"adc-34=echo ### ADC-34 ; imd.b f 81 e\0" \
+"dac=echo ### DAC ; imd.b 11 81 5\0" \
+"boot-hook=run ana\0"
+
+/* What should the console's baud rate be? */
+#define CONFIG_BAUDRATE		9600
+
+/* Ethernet MAC address */
+#define CONFIG_ETHADDR		00:09:70:00:00:00
+
+/* The default Ethernet MAC address can be overwritten just once  */
+#ifdef  CONFIG_ETHADDR
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#endif
+
+/*
+ * Define this to do some miscellaneous board-specific initialization.
+ */
+#define CONFIG_MISC_INIT_R
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 second */
+
+/* Be selective on what keys can delay or stop the autoboot process
+ *     To stop	use: " "
+ */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n"
+#define CONFIG_AUTOBOOT_STOP_STR	" "
+#undef  CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define DEBUG_BOOTKEYS		0
+
+/* Define a command string that is automatically executed when no character
+ * is read on the console interface withing "Boot Delay" after reset.
+ */
+#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
+#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+
+#if CONFIG_BOOT_ROOT_INITRD
+#define CONFIG_BOOTCOMMAND \
+	"version;" \
+	"echo;" \
+	"bootp;" \
+	"setenv bootargs root=/dev/ram0 rw quiet " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"run boot-hook;" \
+	"bootm"
+#endif /* CONFIG_BOOT_ROOT_INITRD */
+
+#if CONFIG_BOOT_ROOT_NFS
+#define CONFIG_BOOTCOMMAND \
+	"version;" \
+	"echo;" \
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) quiet " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"run boot-hook;" \
+	"bootm"
+#endif /* CONFIG_BOOT_ROOT_NFS */
+
+#define CONFIG_BOOTP_RANDOM_DELAY       /* Randomize the BOOTP retry delay */
+
+#define CONFIG_BOOTP_RETRY_COUNT 0x40000000 /* # of timeouts before giving up */
+
+/* Add support for a few extra bootp options like:
+ *	- File size
+ *	- DNS
+ */
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
+				 CONFIG_BOOTP_BOOTFILESIZE | \
+				 CONFIG_BOOTP_DNS)
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT		"=> "
+
+#undef  CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2     "> "
+#endif
+
+/* What U-Boot subsytems do you want enabled? */
+#ifdef CONFIG_ETHER_ON_FCC
+# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+				CFG_CMD_ELF	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_SPI	| \
+				CFG_CMD_SDRAM   | \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_IMMAP	| \
+				CFG_CMD_MII	)
+#else
+# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+				CFG_CMD_ELF	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_SPI	| \
+				CFG_CMD_SDRAM   | \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_IMMAP	)
+#endif /* CONFIG_ETHER_ON_FCC */
+
+/* Where do the internal registers live? */
+#define CFG_IMMR		0xF0000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
+#define CONFIG_SBC8260		1	/* on an EST SBC8260 Board  */
+#define CONFIG_SACSng		1	/* munged for the SACSng */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#else
+#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS		32	/* max number of command args	*/
+
+#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+
+#define CFG_LOAD_ADDR		0x400000   /* default load address */
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+					/* the exception vector table */
+					/* to the end of the DRAM  */
+					/* less monitor and malloc area */
+#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
+				+ CFG_MALLOC_LEN \
+				+ CFG_ENV_SECT_SIZE \
+				+ CFG_STACK_USAGE )
+
+#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
+				- CFG_MEM_END_USAGE )
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_FLASH_BASE	CFG_FLASH0_BASE
+#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
+#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
+#define CFG_SDRAM_SIZE	CFG_SDRAM0_SIZE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+#if defined(CFG_SBC_BOOT_LOW)
+#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#else
+#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CFG_SBC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+#define CFG_SBC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
+				  ((CFG_IMMR & 0x01000000) >>  7) | \
+				  ((CFG_IMMR & 0x00100000) >>  4) )
+
+#define CFG_HRCW_MASTER		( HRCW_BPS10				| \
+				  HRCW_DPPC11				| \
+				  CFG_SBC_HRCW_IMMR			| \
+				  HRCW_MMR00				| \
+				  HRCW_LBPC11				| \
+				  HRCW_APPC10				| \
+				  HRCW_CS10PC00				| \
+				  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
+				  CFG_SBC_HRCW_BOOT_FLAGS )
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1		0
+#define CFG_HRCW_SLAVE2		0
+#define CFG_HRCW_SLAVE3		0
+#define CFG_HRCW_SLAVE4		0
+#define CFG_HRCW_SLAVE5		0
+#define CFG_HRCW_SLAVE6		0
+#define CFG_HRCW_SLAVE7		0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#  define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
+#undef  CFG_FLASH_PROTECTION		/* use hardware protection		*/
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	(64+4)	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
+
+#ifndef CFG_RAMBOOT
+#  define CFG_ENV_IS_IN_FLASH	1
+
+#  ifdef CFG_ENV_IN_OWN_SECT
+#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#    define CFG_ENV_SECT_SIZE	0x10000
+#  else
+#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
+#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
+#    define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
+#  endif /* CFG_ENV_IN_OWN_SECT */
+
+#else
+#  define CFG_ENV_IS_IN_NVRAM	1
+#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#  define CFG_ENV_SIZE		0x200
+#endif /* CFG_RAMBOOT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers			 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT	(HID0_ICE  |\
+			 HID0_DCE  |\
+			 HID0_ICFI |\
+			 HID0_DCI  |\
+			 HID0_IFEM |\
+			 HID0_ABE)
+
+#define CFG_HID0_FINAL	(HID0_ICE  |\
+			 HID0_IFEM |\
+			 HID0_ABE  |\
+			 HID0_EMCP)
+#define CFG_HID2	0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR		0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration					 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR		(BCR_ETM)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				 4-31
+ *-----------------------------------------------------------------------
+ */
+
+#define CFG_SIUMCR	(SIUMCR_DPPC11	|\
+			 SIUMCR_L2CPC00 |\
+			 SIUMCR_APPC10	|\
+			 SIUMCR_MMR00)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#define CFG_SYPCR	(SYPCR_SWTC |\
+			 SYPCR_BMT  |\
+			 SYPCR_PBME |\
+			 SYPCR_LBME |\
+			 SYPCR_SWRI |\
+			 SYPCR_SWP)
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control			 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+			 TMCNTSC_ALR |\
+			 TMCNTSC_TCF |\
+			 TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR	(PISCR_PS  |\
+			 PISCR_PTF |\
+			 PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control					 9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR	0
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration				13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR	0
+
+/*
+ * Initialize Memory Controller:
+ *
+ * Bank Bus	Machine PortSz	Device
+ * ---- ---	------- ------	------
+ *  0	60x	GPCM	16 bit	FLASH (primary flash - 2MB)
+ *  1	60x	GPCM	-- bit	(Unused)
+ *  2	60x	SDRAM	64 bit	SDRAM (DIMM)
+ *  3	60x	SDRAM	64 bit	SDRAM (DIMM)
+ *  4	60x	GPCM	-- bit	(Unused)
+ *  5	60x	GPCM	-- bit	(Unused)
+ *  6	60x	GPCM	16 bit	FLASH  (secondary flash - 2MB)
+ */
+
+/*-----------------------------------------------------------------------
+ * BR0,BR1 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR0,OR1 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 0 - Primary FLASH
+ */
+
+/* BR0 is configured as follows:
+ *
+ *     - Base address of 0x40000000
+ *     - 16 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_16			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+/* OR0 is configured as follows:
+ *
+ *     - 4 MB
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 5
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxG_TRLX			|\
+			 ORxG_EHTR)
+
+/*-----------------------------------------------------------------------
+ * BR2,BR3 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR2,OR3 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 2,3 - SDRAM DIMM
+ */
+
+/* The BR2 is configured as follows:
+ *
+ *     - Base address of 0x00000000
+ *     - 64 bit port size (60x bus only)
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - SDRAM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+#define CFG_BR3_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+/* With a 64 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 64 MB
+ *     - 4 internal banks per device
+ *     - Row start address bit is A8 with PSDMR[PBI] = 0
+ *     - 12 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 64)
+#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A8		|\
+			 ORxS_NUMR_12)
+#else
+#error "INVALID SDRAM CONFIGURATION"
+#endif
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+
+/* Address that the DIMM SPD memory lives at.
+ */
+#define SDRAM_SPD_ADDR 0x50
+
+#if (CFG_SDRAM0_SIZE == 64)
+/* With a 64 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Bank Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A14-A16 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+#define CFG_PSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A14_A16   |\
+			 PSDMR_SDA10_PBI0_A9  |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_3W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_CL_2)
+#else
+#error "INVALID SDRAM CONFIGURATION"
+#endif
+
+/*
+ * Shoot for approximately 1MHz on the prescaler.
+ */
+#if (CONFIG_8260_CLKIN >= (60 * 1000 * 1000))
+#define CFG_MPTPR	MPTPR_PTP_DIV64
+#elif (CONFIG_8260_CLKIN >= (30 * 1000 * 1000))
+#define CFG_MPTPR	MPTPR_PTP_DIV32
+#else
+#warning "Unconfigured bus clock freq: check CFG_MPTPR and CFG_PSRT are OK"
+#define CFG_MPTPR	MPTPR_PTP_DIV32
+#endif
+#define CFG_PSRT	14
+
+
+/*-----------------------------------------------------------------------
+ * BR6 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR6 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 6 - Secondary FLASH
+ *
+ * The secondary FLASH is connected to *CS6
+ */
+#if (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE))
+
+/* BR6 is configured as follows:
+ *
+ *     - Base address of 0x60000000
+ *     - 16 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#  define CFG_BR6_PRELIM  ((CFG_FLASH1_BASE & BRx_BA_MSK) |\
+			   BRx_PS_16			  |\
+			   BRx_MS_GPCM_P		  |\
+			   BRx_V)
+
+/* OR6 is configured as follows:
+ *
+ *     - 2 MB
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 5
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#  define CFG_OR6_PRELIM  (MEG_TO_AM(CFG_FLASH1_SIZE)  |\
+			   ORxG_CSNT		       |\
+			   ORxG_ACS_DIV1	       |\
+			   ORxG_SCY_5_CLK	       |\
+			   ORxG_TRLX		       |\
+			   ORxG_EHTR)
+#endif /* (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE)) */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
new file mode 100644
index 00000000000..b89f503b661
--- /dev/null
+++ b/include/configs/sbc8260.h
@@ -0,0 +1,980 @@
+/*
+ * (C) Copyright 2000
+ * Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * Configuration settings for the WindRiver SBC8260 board.
+ *	See http://www.windriver.com/products/html/sbc8260.html
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Enable debug prints */
+#undef DEBUG		      /* General debug */
+#undef DEBUG_BOOTP_EXT	      /* Debug received vendor fields */
+
+/*****************************************************************************
+ *
+ * These settings must match the way _your_ board is set up
+ *
+ *****************************************************************************/
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
+
+/*-----------------------------------------------------------------------
+ * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
+ *-----------------------------------------------------------------------
+ * What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Here are some example values (all frequencies are in MHz):
+ *
+ * MODCK_H   MODCK[1-3]	 Osc	CPM    Core  S2-6   S2-7   S2-8
+ * -------   ----------	 ---	---    ----  -----  -----  -----
+ * 0x1	     0x5	 33	100    133   Open   Close  Open
+ * 0x1	     0x6	 33	100    166   Open   Open   Close
+ * 0x1	     0x7	 33	100    200   Open   Open   Open
+ *
+ * 0x2	     0x2	 33	133    133   Close  Open   Close
+ * 0x2	     0x3	 33	133    166   Close  Open   Open
+ * 0x2	     0x4	 33	133    200   Open   Close  Close
+ * 0x2	     0x5	 33	133    233   Open   Close  Open
+ * 0x2	     0x6	 33	133    266   Open   Open   Close
+ *
+ * 0x5	     0x5	 66	133    133   Open   Close  Open
+ * 0x5	     0x6	 66	133    166   Open   Open   Close
+ * 0x5	     0x7	 66	133    200   Open   Open   Open
+ * 0x6	     0x0	 66	133    233   Close  Close  Close
+ * 0x6	     0x1	 66	133    266   Close  Close  Open
+ * 0x6	     0x2	 66	133    300   Close  Open   Close
+ */
+#define CFG_SBC_MODCK_H 0x05
+
+/* Define this if you want to boot from 0x00000100. If you don't define
+ * this, you will need to program the bootloader to 0xfff00000, and
+ * get the hardware reset config words at 0xfe000000. The simplest
+ * way to do that is to program the bootloader at both addresses.
+ * It is suggested that you just let U-Boot live at 0x00000000.
+ */
+#define CFG_SBC_BOOT_LOW 1
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * The main FLASH is whichever is connected to *CS0. U-Boot expects
+ * this to be the SIMM.
+ */
+#define CFG_FLASH0_BASE 0x40000000
+#define CFG_FLASH0_SIZE 4
+
+/* What should the base address of the secondary FLASH be and how big
+ * is it (in Mbytes)? The secondary FLASH is whichever is connected
+ * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
+ * want it enabled, don't define these constants.
+ */
+#define CFG_FLASH1_BASE 0x60000000
+#define CFG_FLASH1_SIZE 2
+
+/* What should be the base address of SDRAM DIMM and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 64
+
+/* What should be the base address of the LEDs and switch S0?
+ * If you don't want them enabled, don't define this.
+ */
+#define CFG_LED_BASE 0xa0000000
+
+
+/*
+ * SBC8260 with 16 MB DIMM:
+ *
+ *     0x0000 0000     Exception Vector code, 8k
+ *	     :
+ *     0x0000 1FFF
+ *     0x0000 2000     Free for Application Use
+ *	     :
+ *	     :
+ *
+ *	     :
+ *	     :
+ *     0x00F5 FF30     Monitor Stack (Growing downward)
+ *		       Monitor Stack Buffer (0x80)
+ *     0x00F5 FFB0     Board Info Data
+ *     0x00F6 0000     Malloc Arena
+ *	     :		    CFG_ENV_SECT_SIZE, 256k
+ *	     :		    CFG_MALLOC_LEN,    128k
+ *     0x00FC 0000     RAM Copy of Monitor Code
+ *	     :		    CFG_MONITOR_LEN,   256k
+ *     0x00FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+/*
+ * SBC8260 with 64 MB DIMM:
+ *
+ *     0x0000 0000     Exception Vector code, 8k
+ *	     :
+ *     0x0000 1FFF
+ *     0x0000 2000     Free for Application Use
+ *	     :
+ *	     :
+ *
+ *	     :
+ *	     :
+ *     0x03F5 FF30     Monitor Stack (Growing downward)
+ *		       Monitor Stack Buffer (0x80)
+ *     0x03F5 FFB0     Board Info Data
+ *     0x03F6 0000     Malloc Arena
+ *	     :		    CFG_ENV_SECT_SIZE, 256k
+ *	     :		    CFG_MALLOC_LEN,    128k
+ *     0x03FC 0000     RAM Copy of Monitor Code
+ *	     :		    CFG_MONITOR_LEN,   256k
+ *     0x03FF FFFF     [End of RAM], CFG_SDRAM_SIZE - 1
+ */
+
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ */
+#define CONFIG_CONS_ON_SMC	1	/* define if console on SMC */
+#undef	CONFIG_CONS_ON_SCC		/* define if console on SCC */
+#undef	CONFIG_CONS_NONE		/* define if console on neither */
+#define CONFIG_CONS_INDEX	1	/* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+
+#undef	CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_ON_FCC
+#undef	CONFIG_ETHER_NONE		/* define if ethernet on neither */
+
+#ifdef	CONFIG_ETHER_ON_SCC
+#define CONFIG_ETHER_INDEX	1	/* which SCC/FCC channel for ethernet */
+#endif	/* CONFIG_ETHER_ON_SCC */
+
+#ifdef	CONFIG_ETHER_ON_FCC
+#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
+#define CONFIG_MII			/* MII PHY management		*/
+#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+/*
+ * Port pins used for bit-banged MII communictions (if applicable).
+ */
+#define MDIO_PORT	2	/* Port C */
+#define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
+#define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
+#define MDIO_READ	((iop->pdat &  0x00400000) != 0)
+
+#define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
+			else	iop->pdat &= ~0x00400000
+
+#define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
+			else	iop->pdat &= ~0x00200000
+
+#define MIIDELAY	udelay(1)
+#endif	/* CONFIG_ETHER_ON_FCC */
+
+#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1)
+
+/*
+ *  - RX clk is CLK11
+ *  - TX clk is CLK12
+ */
+# define CFG_CMXSCR_VALUE	(CMXSCR_RS1CS_CLK11  | CMXSCR_TS1CS_CLK12)
+
+#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 2)
+
+/*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers (see 28-13)
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CFG_CPMFCR_RAMTYPE	0
+# define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
+
+/*
+ * select SPI support configuration
+ */
+#undef  CONFIG_SPI			/* enable SPI driver		*/
+
+/*
+ * select i2c support configuration
+ *
+ * Supported configurations are {none, software, hardware} drivers.
+ * If the software driver is chosen, there are some additional
+ * configuration items that the driver uses to drive the port pins.
+ */
+#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#ifdef CONFIG_SOFT_I2C
+#define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE	(iop->pdir |=  0x00010000)
+#define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
+#define I2C_READ	((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
+			else    iop->pdat &= ~0x00010000
+#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
+			else    iop->pdat &= ~0x00020000
+#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+
+/* Define this to reserve an entire FLASH sector (256 KB) for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT	1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* What should the console's baud rate be? */
+#define CONFIG_BAUDRATE		9600
+
+/* Ethernet MAC address */
+#define CONFIG_ETHADDR		00:a0:1e:a8:7b:cb
+
+/*
+ * Define this to set the last octet of the ethernet address from the
+ * DS0-DS7 switch and light the LEDs with the result. The DS0-DS7
+ * switch and the LEDs are backwards with respect to each other. DS7
+ * is on the board edge side of both the LED strip and the DS0-DS7
+ * switch.
+ */
+#if 0
+# define CONFIG_MISC_INIT_R
+#endif
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#if 0
+/* Be selective on what keys can delay or stop the autoboot process
+ *     To stop	use: " "
+ */
+# define CONFIG_AUTOBOOT_KEYED
+# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+# define CONFIG_AUTOBOOT_STOP_STR	" "
+# undef CONFIG_AUTOBOOT_DELAY_STR
+# define DEBUG_BOOTKEYS		0
+#endif
+
+/* Define a command string that is automatically executed when no character
+ * is read on the console interface withing "Boot Delay" after reset.
+ */
+#define CONFIG_BOOT_ROOT_INITRD 0	/* Use ram disk for the root file system */
+#define CONFIG_BOOT_ROOT_NFS	1	/* Use a NFS mounted root file system */
+
+#if CONFIG_BOOT_ROOT_INITRD
+#define CONFIG_BOOTCOMMAND \
+	"version;" \
+	"echo;" \
+	"bootp;" \
+	"setenv bootargs root=/dev/ram0 rw " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"bootm"
+#endif /* CONFIG_BOOT_ROOT_INITRD */
+
+#if CONFIG_BOOT_ROOT_NFS
+#define CONFIG_BOOTCOMMAND \
+	"version;" \
+	"echo;" \
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"bootm"
+#endif /* CONFIG_BOOT_ROOT_NFS */
+
+/* Add support for a few extra bootp options like:
+ *	- File size
+ *	- DNS
+ */
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
+				 CONFIG_BOOTP_BOOTFILESIZE | \
+				 CONFIG_BOOTP_DNS)
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT		"=> "
+
+/* What U-Boot subsytems do you want enabled? */
+#ifdef CONFIG_ETHER_ON_FCC
+# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+				CFG_CMD_ELF	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_SDRAM   | \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_IMMAP	| \
+				CFG_CMD_MII	)
+#else
+# define CONFIG_COMMANDS	(((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
+				CFG_CMD_ELF	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_SDRAM   | \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_IMMAP	)
+#endif /* CONFIG_ETHER_ON_FCC */
+
+/* Where do the internal registers live? */
+#define CFG_IMMR		0xF0000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
+#define CONFIG_SBC8260		1	/* on an EST SBC8260 Board  */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CBSIZE		1024	/* Console I/O Buffer Size	     */
+#else
+#  define CFG_CBSIZE		256	/* Console I/O Buffer Size	     */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE	  (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS		32	/* max number of command args	*/
+
+#define CFG_BARGSIZE		CFG_CBSIZE /* Boot Argument Buffer Size	   */
+
+#define CFG_LOAD_ADDR		0x140000   /* default load address */
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_MEMTEST_START	0x2000	/* memtest works from the end of */
+					/* the exception vector table */
+					/* to the end of the DRAM  */
+					/* less monitor and malloc area */
+#define CFG_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
+#define CFG_MEM_END_USAGE	( CFG_MONITOR_LEN \
+				+ CFG_MALLOC_LEN \
+				+ CFG_ENV_SECT_SIZE \
+				+ CFG_STACK_USAGE )
+
+#define CFG_MEMTEST_END		( CFG_SDRAM_SIZE * 1024 * 1024 \
+				- CFG_MEM_END_USAGE )
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_FLASH_BASE	CFG_FLASH0_BASE
+#define CFG_FLASH_SIZE	CFG_FLASH0_SIZE
+#define CFG_SDRAM_BASE	CFG_SDRAM0_BASE
+#define CFG_SDRAM_SIZE	CFG_SDRAM0_SIZE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+#if defined(CFG_SBC_BOOT_LOW)
+#  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
+#else
+#  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
+#endif /* defined(CFG_SBC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+#define CFG_SBC_HRCW_IMMR	( ((CFG_IMMR & 0x10000000) >> 10) | \
+				  ((CFG_IMMR & 0x01000000) >>  7) | \
+				  ((CFG_IMMR & 0x00100000) >>  4) )
+
+#define CFG_HRCW_MASTER		( HRCW_BPS11				| \
+				  HRCW_DPPC11				| \
+				  CFG_SBC_HRCW_IMMR			| \
+				  HRCW_MMR00				| \
+				  HRCW_LBPC11				| \
+				  HRCW_APPC10				| \
+				  HRCW_CS10PC00				| \
+				  (CFG_SBC_MODCK_H & HRCW_MODCK_H1111)	| \
+				  CFG_SBC_HRCW_BOOT_FLAGS )
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1		0
+#define CFG_HRCW_SLAVE2		0
+#define CFG_HRCW_SLAVE3		0
+#define CFG_HRCW_SLAVE4		0
+#define CFG_HRCW_SLAVE5		0
+#define CFG_HRCW_SLAVE6		0
+#define CFG_HRCW_SLAVE7		0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x4000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE	CFG_FLASH0_BASE
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#  define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	16	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	1	/* Timeout for Flash Write (in ms)	*/
+
+#ifndef CFG_RAMBOOT
+#  define CFG_ENV_IS_IN_FLASH	1
+
+#  ifdef CFG_ENV_IN_OWN_SECT
+#    define CFG_ENV_ADDR	(CFG_MONITOR_BASE + 0x40000)
+#    define CFG_ENV_SECT_SIZE	0x40000
+#  else
+#    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
+#    define CFG_ENV_SIZE	0x1000	/* Total Size of Environment Sector	*/
+#    define CFG_ENV_SECT_SIZE	0x10000 /* see README - env sect real size	*/
+#  endif /* CFG_ENV_IN_OWN_SECT */
+
+#else
+#  define CFG_ENV_IS_IN_NVRAM	1
+#  define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#  define CFG_ENV_SIZE		0x200
+#endif /* CFG_RAMBOOT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers			 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT	(HID0_ICE  |\
+			 HID0_DCE  |\
+			 HID0_ICFI |\
+			 HID0_DCI  |\
+			 HID0_IFEM |\
+			 HID0_ABE)
+
+#define CFG_HID0_FINAL	(HID0_ICE  |\
+			 HID0_IFEM |\
+			 HID0_ABE  |\
+			 HID0_EMCP)
+#define CFG_HID2	0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR		0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration					 4-25
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BCR		(BCR_ETM)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				 4-31
+ *-----------------------------------------------------------------------
+ */
+
+#define CFG_SIUMCR	(SIUMCR_DPPC11	|\
+			 SIUMCR_L2CPC00 |\
+			 SIUMCR_APPC10	|\
+			 SIUMCR_MMR00)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#define CFG_SYPCR	(SYPCR_SWTC |\
+			 SYPCR_BMT  |\
+			 SYPCR_PBME |\
+			 SYPCR_LBME |\
+			 SYPCR_SWRI |\
+			 SYPCR_SWP)
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control			 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC	(TMCNTSC_SEC |\
+			 TMCNTSC_ALR |\
+			 TMCNTSC_TCF |\
+			 TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR	(PISCR_PS  |\
+			 PISCR_PTF |\
+			 PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control					 9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR	0
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration				13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR	0
+
+/*
+ * Initialize Memory Controller:
+ *
+ * Bank Bus	Machine PortSz	Device
+ * ---- ---	------- ------	------
+ *  0	60x	GPCM	32 bit	FLASH (SIMM - 4MB) *
+ *  1	60x	GPCM	32 bit	FLASH (SIMM - Unused)
+ *  2	60x	SDRAM	64 bit	SDRAM (DIMM - 16MB or 64MB)
+ *  3	60x	SDRAM	64 bit	SDRAM (DIMM - Unused)
+ *  4	Local	SDRAM	32 bit	SDRAM (on board - 4MB)
+ *  5	60x	GPCM	 8 bit	EEPROM (8KB)
+ *  6	60x	GPCM	 8 bit	FLASH  (on board - 2MB) *
+ *  7	60x	GPCM	 8 bit	LEDs, switches
+ *
+ *  (*) This configuration requires the SBC8260 be configured
+ *	so that *CS0 goes to the FLASH SIMM, and *CS6 goes to
+ *	the on board FLASH. In other words, JP24 should have
+ *	pins 1 and 2 jumpered and pins 3 and 4 jumpered.
+ *
+ */
+
+/*-----------------------------------------------------------------------
+ * BR0,BR1 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR0,OR1 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 0,1 - FLASH SIMM
+ *
+ * This expects the FLASH SIMM to be connected to *CS0
+ * It consists of 4 AM29F080B parts.
+ *
+ * Note: For the 4 MB SIMM, *CS1 is unused.
+ */
+
+/* BR0 is configured as follows:
+ *
+ *     - Base address of 0x40000000
+ *     - 32 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR0_PRELIM	((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_32			|\
+			 BRx_MS_GPCM_P			|\
+			 BRx_V)
+
+/* OR0 is configured as follows:
+ *
+ *     - 4 MB
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 5
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#define CFG_OR0_PRELIM	(MEG_TO_AM(CFG_FLASH0_SIZE)	|\
+			 ORxG_CSNT			|\
+			 ORxG_ACS_DIV1			|\
+			 ORxG_SCY_5_CLK			|\
+			 ORxG_TRLX			|\
+			 ORxG_EHTR)
+
+/*-----------------------------------------------------------------------
+ * BR2,BR3 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR2,OR3 - Option Register
+ *     Ref: Section 10.3.2 on page 10-16
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 2,3 - SDRAM DIMM
+ *
+ *     16MB DIMM: P/N
+ *     64MB DIMM: P/N  1W-8864X8-4-P1-EST
+ *
+ * Note: *CS3 is unused for this DIMM
+ */
+
+/* With a 16 MB or 64 MB DIMM, the BR2 is configured as follows:
+ *
+ *     - Base address of 0x00000000
+ *     - 64 bit port size (60x bus only)
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - SDRAM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#define CFG_BR2_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+#define CFG_BR3_PRELIM	((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+			 BRx_PS_64			|\
+			 BRx_MS_SDRAM_P			|\
+			 BRx_V)
+
+/* With a 16 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 16 MB
+ *     - 2 internal banks per device
+ *     - Row start address bit is A9 with PSDMR[PBI] = 0
+ *     - 11 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 16)
+#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+			 ORxS_BPD_2			|\
+			 ORxS_ROWST_PBI0_A9		|\
+			 ORxS_NUMR_11)
+#endif
+
+/* With a 64 MB DIMM, the OR2 is configured as follows:
+ *
+ *     - 64 MB
+ *     - 4 internal banks per device
+ *     - Row start address bit is A8 with PSDMR[PBI] = 0
+ *     - 12 row address lines
+ *     - Back-to-back page mode
+ *     - Internal bank interleaving within save device enabled
+ */
+#if (CFG_SDRAM0_SIZE == 64)
+#define CFG_OR2_PRELIM	(MEG_TO_AM(CFG_SDRAM0_SIZE)	|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI0_A8		|\
+			 ORxS_NUMR_12)
+#endif
+
+/*-----------------------------------------------------------------------
+ * PSDMR - 60x Bus SDRAM Mode Register
+ *     Ref: Section 10.3.3 on page 10-21
+ *-----------------------------------------------------------------------
+ */
+
+/* Address that the DIMM SPD memory lives at.
+ */
+#define SDRAM_SPD_ADDR 0x54
+
+#if (CFG_SDRAM0_SIZE == 16)
+/* With a 16 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Bank Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A16-A18 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+#define CFG_PSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A16_A18   |\
+			 PSDMR_SDA10_PBI0_A9  |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_3W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_CL_2)
+#endif
+
+#if (CFG_SDRAM0_SIZE == 64)
+/* With a 64 MB DIMM, the PSDMR is configured as follows:
+ *
+ *     - Bank Based Interleaving,
+ *     - Refresh Enable,
+ *     - Address Multiplexing where A5 is output on A14 pin
+ *	 (A6 on A15, and so on),
+ *     - use address pins A14-A16 as bank select,
+ *     - A9 is output on SDA10 during an ACTIVATE command,
+ *     - earliest timing for ACTIVATE command after REFRESH command is 7 clocks,
+ *     - earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
+ *	 is 3 clocks,
+ *     - earliest timing for READ/WRITE command after ACTIVATE command is
+ *	 2 clocks,
+ *     - earliest timing for PRECHARGE after last data was read is 1 clock,
+ *     - earliest timing for PRECHARGE after last data was written is 1 clock,
+ *     - CAS Latency is 2.
+ */
+#define CFG_PSDMR	(PSDMR_RFEN	      |\
+			 PSDMR_SDAM_A14_IS_A5 |\
+			 PSDMR_BSMA_A14_A16   |\
+			 PSDMR_SDA10_PBI0_A9  |\
+			 PSDMR_RFRC_7_CLK     |\
+			 PSDMR_PRETOACT_3W    |\
+			 PSDMR_ACTTORW_2W     |\
+			 PSDMR_LDOTOPRE_1C    |\
+			 PSDMR_WRC_1C	      |\
+			 PSDMR_CL_2)
+#endif
+
+/*
+ * Shoot for approximately 1MHz on the prescaler.
+ */
+#if (CONFIG_8260_CLKIN == (66 * 1000 * 1000))
+#define CFG_MPTPR	MPTPR_PTP_DIV64
+#elif (CONFIG_8260_CLKIN == (33 * 1000 * 1000))
+#define CFG_MPTPR	MPTPR_PTP_DIV32
+#else
+#warning "Unconfigured bus clock freq: check CFG_MPTPR and CFG_PSRT are OK"
+#define CFG_MPTPR	MPTPR_PTP_DIV32
+#endif
+#define CFG_PSRT	14
+
+
+/* Bank 4 - On board SDRAM
+ *
+ * This is not implemented yet.
+ */
+
+/*-----------------------------------------------------------------------
+ * BR6 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR6 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 6 - On board FLASH
+ *
+ * This expects the on board FLASH SIMM to be connected to *CS6
+ * It consists of 1 AM29F016A part.
+ */
+#if (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE))
+
+/* BR6 is configured as follows:
+ *
+ *     - Base address of 0x60000000
+ *     - 8 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#  define CFG_BR6_PRELIM  ((CFG_FLASH1_BASE & BRx_BA_MSK) |\
+			   BRx_PS_8			  |\
+			   BRx_MS_GPCM_P		  |\
+			   BRx_V)
+
+/* OR6 is configured as follows:
+ *
+ *     - 2 MB
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 5
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#  define CFG_OR6_PRELIM  (MEG_TO_AM(CFG_FLASH1_SIZE)  |\
+			   ORxG_CSNT		       |\
+			   ORxG_ACS_DIV1	       |\
+			   ORxG_SCY_5_CLK	       |\
+			   ORxG_TRLX		       |\
+			   ORxG_EHTR)
+#endif /* (defined(CFG_FLASH1_BASE) && defined(CFG_FLASH1_SIZE)) */
+
+/*-----------------------------------------------------------------------
+ * BR7 - Base Register
+ *     Ref: Section 10.3.1 on page 10-14
+ * OR7 - Option Register
+ *     Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 7 - LEDs and switches
+ *
+ *  LEDs     are at 0x00001 (write only)
+ *  switches are at 0x00001 (read only)
+ */
+#ifdef CFG_LED_BASE
+
+/* BR7 is configured as follows:
+ *
+ *     - Base address of 0xA0000000
+ *     - 8 bit port size
+ *     - Data errors checking is disabled
+ *     - Read and write access
+ *     - GPCM 60x bus
+ *     - Access are handled by the memory controller according to MSEL
+ *     - Not used for atomic operations
+ *     - No data pipelining is done
+ *     - Valid
+ */
+#  define CFG_BR7_PRELIM  ((CFG_LED_BASE & BRx_BA_MSK)	 |\
+			   BRx_PS_8			 |\
+			   BRx_MS_GPCM_P		 |\
+			   BRx_V)
+
+/* OR7 is configured as follows:
+ *
+ *     - 1 byte
+ *     - *BCTL0 is asserted upon access to the current memory bank
+ *     - *CW / *WE are negated a quarter of a clock earlier
+ *     - *CS is output at the same time as the address lines
+ *     - Uses a clock cycle length of 15
+ *     - *PSDVAL is generated internally by the memory controller
+ *	 unless *GTA is asserted earlier externally.
+ *     - Relaxed timing is generated by the GPCM for accesses
+ *	 initiated to this memory region.
+ *     - One idle clock is inserted between a read access from the
+ *	 current bank and the next access.
+ */
+#  define CFG_OR7_PRELIM  (ORxG_AM_MSK		       |\
+			   ORxG_CSNT		       |\
+			   ORxG_ACS_DIV1	       |\
+			   ORxG_SCY_15_CLK	       |\
+			   ORxG_TRLX		       |\
+			   ORxG_EHTR)
+#endif /* CFG_LED_BASE */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM	0x02	/* Software reboot		     */
+
+#endif	/* __CONFIG_H */
diff --git a/include/galileo/pci.h b/include/galileo/pci.h
new file mode 100644
index 00000000000..f45dd3617eb
--- /dev/null
+++ b/include/galileo/pci.h
@@ -0,0 +1,113 @@
+/* PCI.h - PCI functions header file */
+
+/* Copyright - Galileo technology. */
+
+#ifndef __INCpcih
+#define __INCpcih
+
+/* includes */
+
+#include "core.h"
+#include "memory.h"
+
+/* According to PCI REV 2.1 MAX agents allowed on the bus are -21- */
+#define PCI_MAX_DEVICES 22
+
+
+/* Macros */
+#define     SELF                    32
+
+/* Defines for the access regions. */
+#define     PREFETCH_ENABLE                 BIT12
+#define     PREFETCH_DISABLE                NO_BIT
+#define     DELAYED_READ_ENABLE             BIT13
+/* #define     CACHING_ENABLE                  BIT14 */
+/* aggressive prefetch: PCI slave prefetch two burst in advance*/
+#define     AGGRESSIVE_PREFETCH              BIT16
+/* read line aggresive prefetch: PCI slave prefetch two burst in advance*/
+#define     READ_LINE_AGGRESSIVE_PREFETCH   BIT17
+/* read multiple aggresive prefetch: PCI slave prefetch two burst in advance*/
+#define     READ_MULTI_AGGRESSIVE_PREFETCH  BIT18
+#define     MAX_BURST_4                     NO_BIT
+#define     MAX_BURST_8                     BIT20  /* Bits[21:20] = 01 */
+#define     MAX_BURST_16                    BIT21  /* Bits[21:20] = 10 */
+#define     PCI_BYTE_SWAP                   NO_BIT /* Bits[25:24] = 00 */
+#define     PCI_NO_SWAP                     BIT24  /* Bits[25:24] = 01 */
+#define     PCI_BYTE_AND_WORD_SWAP          BIT25  /* Bits[25:24] = 10 */
+#define     PCI_WORD_SWAP                  (BIT24 | BIT25) /* Bits[25:24] = 11 */
+#define     PCI_ACCESS_PROTECT              BIT28
+#define     PCI_WRITE_PROTECT               BIT29
+
+/* typedefs */
+
+typedef enum __pciAccessRegions{REGION0,REGION1,REGION2,REGION3,REGION4,REGION5,
+                                REGION6,REGION7} PCI_ACCESS_REGIONS;
+
+typedef enum __pciAgentPrio{LOW_AGENT_PRIO,HI_AGENT_PRIO} PCI_AGENT_PRIO;
+typedef enum __pciAgentPark{PARK_ON_AGENT,DONT_PARK_ON_AGENT} PCI_AGENT_PARK;
+
+typedef enum __pciSnoopType{PCI_NO_SNOOP,PCI_SNOOP_WT,PCI_SNOOP_WB}
+                            PCI_SNOOP_TYPE;
+typedef enum __pciSnoopRegion{PCI_SNOOP_REGION0,PCI_SNOOP_REGION1,
+                              PCI_SNOOP_REGION2,PCI_SNOOP_REGION3}
+                              PCI_SNOOP_REGION;
+
+typedef enum __memPciHost{PCI_HOST0,PCI_HOST1} PCI_HOST;
+typedef enum __memPciRegion{PCI_REGION0,PCI_REGION1,
+   			 PCI_REGION2,PCI_REGION3,
+			 PCI_IO}
+			 PCI_REGION;
+
+/* read/write configuration registers on local PCI bus. */
+void pciWriteConfigReg(PCI_HOST host, unsigned int regOffset,
+		       unsigned int pciDevNum, unsigned int data);
+unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
+                               unsigned int pciDevNum);
+
+/* read/write configuration registers on another PCI bus. */
+void pciOverBridgeWriteConfigReg(PCI_HOST host,
+				 unsigned int regOffset,
+                                 unsigned int pciDevNum,
+                                 unsigned int busNum,unsigned int data);
+unsigned int pciOverBridgeReadConfigReg(PCI_HOST host,
+					unsigned int regOffset,
+                                        unsigned int pciDevNum,
+                                        unsigned int busNum);
+
+/*      Master`s memory space   */
+bool pciMapSpace(PCI_HOST host, PCI_REGION region,
+		unsigned int remapBase,
+		unsigned int deviceBase,
+	        unsigned int deviceLength);
+unsigned int pciGetSpaceBase(PCI_HOST host, PCI_REGION region);
+unsigned int pciGetSpaceSize(PCI_HOST host, PCI_REGION region);
+
+/*      Slave`s memory space   */
+void pciMapMemoryBank(PCI_HOST host, MEMORY_BANK bank,
+		      unsigned int pci0Dram0Base, unsigned int pci0Dram0Size);
+
+/* PCI region options */
+
+bool  pciSetRegionFeatures(PCI_HOST host, PCI_ACCESS_REGIONS region,
+	unsigned int features, unsigned int baseAddress,
+	unsigned int regionLength);
+
+void  pciDisableAccessRegion(PCI_HOST host, PCI_ACCESS_REGIONS region);
+
+/* PCI arbiter */
+
+bool pciArbiterEnable(PCI_HOST host);
+bool pciArbiterDisable(PCI_HOST host);
+bool pciParkingDisable(PCI_HOST host, PCI_AGENT_PARK internalAgent,
+                        PCI_AGENT_PARK externalAgent0,
+                        PCI_AGENT_PARK externalAgent1,
+                        PCI_AGENT_PARK externalAgent2,
+                        PCI_AGENT_PARK externalAgent3,
+                        PCI_AGENT_PARK externalAgent4,
+                        PCI_AGENT_PARK externalAgent5);
+bool pciSetRegionSnoopMode(PCI_HOST host, PCI_SNOOP_REGION region,
+			    PCI_SNOOP_TYPE snoopType,
+                            unsigned int baseAddress,
+                            unsigned int regionLength);
+
+#endif /* __INCpcih */
diff --git a/include/jffs2/jffs2.h b/include/jffs2/jffs2.h
new file mode 100644
index 00000000000..909869006d1
--- /dev/null
+++ b/include/jffs2/jffs2.h
@@ -0,0 +1,208 @@
+/*
+ * JFFS2 -- Journalling Flash File System, Version 2.
+ *
+ * Copyright (C) 2001 Red Hat, Inc.
+ *
+ * Created by David Woodhouse <dwmw2@cambridge.redhat.com>
+ *
+ * The original JFFS, from which the design for JFFS2 was derived,
+ * was designed and implemented by Axis Communications AB.
+ *
+ * The contents of this file are subject to the Red Hat eCos Public
+ * License Version 1.1 (the "Licence"); you may not use this file
+ * except in compliance with the Licence.  You may obtain a copy of
+ * the Licence at http://www.redhat.com/
+ *
+ * Software distributed under the Licence is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.
+ * See the Licence for the specific language governing rights and
+ * limitations under the Licence.
+ *
+ * The Original Code is JFFS2 - Journalling Flash File System, version 2
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the RHEPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the RHEPL or the GPL.
+ *
+ * $Id: jffs2.h,v 1.2 2002/01/17 00:53:20 nyet Exp $
+ *
+ */
+
+#ifndef __LINUX_JFFS2_H__
+#define __LINUX_JFFS2_H__
+
+#include <asm/types.h>
+#include <jffs2/load_kernel.h>
+
+#define JFFS2_SUPER_MAGIC 0x72b6
+
+/* Values we may expect to find in the 'magic' field */
+#define JFFS2_OLD_MAGIC_BITMASK 0x1984
+#define JFFS2_MAGIC_BITMASK 0x1985
+#define KSAMTIB_CIGAM_2SFFJ 0x5981 /* For detecting wrong-endian fs */
+#define JFFS2_EMPTY_BITMASK 0xffff
+#define JFFS2_DIRTY_BITMASK 0x0000
+
+/* We only allow a single char for length, and 0xFF is empty flash so
+   we don't want it confused with a real length. Hence max 254.
+*/
+#define JFFS2_MAX_NAME_LEN 254
+
+/* How small can we sensibly write nodes? */
+#define JFFS2_MIN_DATA_LEN 128
+
+#define JFFS2_COMPR_NONE	0x00
+#define JFFS2_COMPR_ZERO	0x01
+#define JFFS2_COMPR_RTIME	0x02
+#define JFFS2_COMPR_RUBINMIPS	0x03
+#define JFFS2_COMPR_COPY	0x04
+#define JFFS2_COMPR_DYNRUBIN	0x05
+#define JFFS2_COMPR_ZLIB	0x06
+#define JFFS2_NUM_COMPR		7
+
+/* Compatibility flags. */
+#define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+#define JFFS2_NODE_ACCURATE 0x2000
+/* INCOMPAT: Fail to mount the filesystem */
+#define JFFS2_FEATURE_INCOMPAT 0xc000
+/* ROCOMPAT: Mount read-only */
+#define JFFS2_FEATURE_ROCOMPAT 0x8000
+/* RWCOMPAT_COPY: Mount read/write, and copy the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_COPY 0x4000
+/* RWCOMPAT_DELETE: Mount read/write, and delete the node when it's GC'd */
+#define JFFS2_FEATURE_RWCOMPAT_DELETE 0x0000
+
+#define JFFS2_NODETYPE_DIRENT (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 1)
+#define JFFS2_NODETYPE_INODE (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 2)
+#define JFFS2_NODETYPE_CLEANMARKER (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3)
+
+/* Maybe later... */
+/*#define JFFS2_NODETYPE_CHECKPOINT (JFFS2_FEATURE_RWCOMPAT_DELETE | JFFS2_NODE_ACCURATE | 3) */
+/*#define JFFS2_NODETYPE_OPTIONS (JFFS2_FEATURE_RWCOMPAT_COPY | JFFS2_NODE_ACCURATE | 4) */
+
+/* Same as the non_ECC versions, but with extra space for real
+ * ECC instead of just the checksum. For use on NAND flash
+ */
+/*#define JFFS2_NODETYPE_DIRENT_ECC (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 5) */
+/*#define JFFS2_NODETYPE_INODE_ECC (JFFS2_FEATURE_INCOMPAT | JFFS2_NODE_ACCURATE | 6) */
+
+#define JFFS2_INO_FLAG_PREREAD	  1	/* Do read_inode() for this one at
+					   mount time, don't wait for it to
+					   happen later */
+#define JFFS2_INO_FLAG_USERCOMPR  2	/* User has requested a specific
+					   compression type */
+
+
+struct jffs2_unknown_node
+{
+	/* All start like this */
+	__u16 magic;
+	__u16 nodetype;
+	__u32 totlen; /* So we can skip over nodes we don't grok */
+	__u32 hdr_crc;
+} __attribute__((packed));
+
+struct jffs2_raw_dirent
+{
+	__u16 magic;
+	__u16 nodetype;	/* == JFFS_NODETYPE_DIRENT */
+	__u32 totlen;
+	__u32 hdr_crc;
+	__u32 pino;
+	__u32 version;
+	__u32 ino; /* == zero for unlink */
+	__u32 mctime;
+	__u8 nsize;
+	__u8 type;
+	__u8 unused[2];
+	__u32 node_crc;
+	__u32 name_crc;
+	__u8 name[0];
+} __attribute__((packed));
+
+/* The JFFS2 raw inode structure: Used for storage on physical media.  */
+/* The uid, gid, atime, mtime and ctime members could be longer, but
+   are left like this for space efficiency. If and when people decide
+   they really need them extended, it's simple enough to add support for
+   a new type of raw node.
+*/
+struct jffs2_raw_inode
+{
+	__u16 magic;      /* A constant magic number.  */
+	__u16 nodetype;   /* == JFFS_NODETYPE_INODE */
+	__u32 totlen;     /* Total length of this node (inc data, etc.) */
+	__u32 hdr_crc;
+	__u32 ino;        /* Inode number.  */
+	__u32 version;    /* Version number.  */
+	__u32 mode;       /* The file's type or mode.  */
+	__u16 uid;        /* The file's owner.  */
+	__u16 gid;        /* The file's group.  */
+	__u32 isize;      /* Total resultant size of this inode (used for truncations)  */
+	__u32 atime;      /* Last access time.  */
+	__u32 mtime;      /* Last modification time.  */
+	__u32 ctime;      /* Change time.  */
+	__u32 offset;     /* Where to begin to write.  */
+	__u32 csize;      /* (Compressed) data size */
+	__u32 dsize;	  /* Size of the node's data. (after decompression) */
+	__u8 compr;       /* Compression algorithm used */
+	__u8 usercompr;	  /* Compression algorithm requested by the user */
+	__u16 flags;	  /* See JFFS2_INO_FLAG_* */
+	__u32 data_crc;   /* CRC for the (compressed) data.  */
+	__u32 node_crc;   /* CRC for the raw inode (excluding data)  */
+/*	__u8 data[dsize]; */
+} __attribute__((packed));
+
+union jffs2_node_union {
+	struct jffs2_raw_inode i;
+	struct jffs2_raw_dirent d;
+	struct jffs2_unknown_node u;
+} __attribute__((packed));
+
+enum
+  {
+    DT_UNKNOWN = 0,
+# define DT_UNKNOWN     DT_UNKNOWN
+    DT_FIFO = 1,
+# define DT_FIFO        DT_FIFO
+    DT_CHR = 2,
+# define DT_CHR         DT_CHR
+    DT_DIR = 4,
+# define DT_DIR         DT_DIR
+    DT_BLK = 6,
+# define DT_BLK         DT_BLK
+    DT_REG = 8,
+# define DT_REG         DT_REG
+    DT_LNK = 10,
+# define DT_LNK         DT_LNK
+    DT_SOCK = 12,
+# define DT_SOCK        DT_SOCK
+    DT_WHT = 14
+# define DT_WHT         DT_WHT
+  };
+
+
+u32 jffs2_1pass_ls(struct part_info *part,const char *fname);
+u32 jffs2_1pass_load(char *dest, struct part_info *part,const char *fname);
+u32 jffs2_1pass_info(struct part_info *part);
+
+void rtime_decompress(unsigned char *data_in, unsigned char *cpage_out, u32
+	srclen, u32 destlen);
+void rubin_do_decompress(unsigned char *bits, unsigned char *in, unsigned char
+	*page_out, __u32 destlen);
+void dynrubin_decompress(unsigned char *data_in, unsigned char *cpage_out,
+	unsigned long sourcelen, unsigned long dstlen);
+long zlib_decompress(unsigned char *data_in, unsigned char *cpage_out,
+	                      __u32 srclen, __u32 destlen);
+
+
+
+
+
+#endif /* __LINUX_JFFS2_H__ */
diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h
new file mode 100644
index 00000000000..d8b4240766e
--- /dev/null
+++ b/include/jffs2/load_kernel.h
@@ -0,0 +1,76 @@
+#ifndef load_kernel_h
+#define load_kernel_h
+/*-------------------------------------------------------------------------
+ * Filename:      load_kernel.h
+ * Version:       $Id: load_kernel.h,v 1.3 2002/01/25 01:34:11 nyet Exp $
+ * Copyright:     Copyright (C) 2001, Russ Dill
+ * Author:        Russ Dill <Russ.Dill@asu.edu>
+ * Description:   header for load kernel modules
+ *-----------------------------------------------------------------------*/
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/* this struct is very similar to mtd_info */
+struct part_info {
+	u32 size;	 /* Total size of the Partition */
+
+	/* "Major" erase size for the device. Naïve users may take this
+	 * to be the only erase size available, or may use the more detailed
+	 * information below if they desire
+	 */
+	u32 erasesize;
+
+	/* Where in memory does this partition start? */
+	char *offset;
+
+	/* used by jffs2 set to NULL */
+	void *jffs2_priv;
+
+	/* private filed used by user */
+	void *usr_priv;
+};
+
+struct part_info*
+jffs2_part_info(int part_num);
+
+struct kernel_loader {
+
+	/* Return true if there is a kernel contained at src */
+	int (* check_magic)(struct part_info *part);
+
+	/* load the kernel from the partition part to dst, return the number
+	 * of bytes copied if successful, zero if not */
+	u32 (* load_kernel)(u32 *dst, struct part_info *part, const char *kernel_filename);
+
+	/* A brief description of the module (ie, "cramfs") */
+	char *name;
+};
+
+#define ldr_strlen	strlen
+#define ldr_strncmp	strncmp
+#define ldr_memcpy	memcpy
+#define putstr(x)	printf("%s", x)
+#define mmalloc		malloc
+#define UDEBUG		printf
+
+#define putnstr(str, size)	printf("%*.*s", size, size, str)
+#define ldr_output_string(x)	puts(x)
+#define putLabeledWord(x, y)	printf("%s %08x\n", x, (unsigned int)y)
+#define led_blink(x, y, z, a)
+
+#endif /* load_kernel_h */
diff --git a/include/lcd.h b/include/lcd.h
new file mode 100644
index 00000000000..d063c9c8b56
--- /dev/null
+++ b/include/lcd.h
@@ -0,0 +1,39 @@
+/*
+ * MPC823 LCD Controller
+ *
+ * Modeled after video interface by Paolo Scaffardi
+ *
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _LCD_H_
+#define _LCD_H_
+
+/* Video functions */
+
+int	lcd_init	(void *lcdbase);
+void	lcd_putc	(const char c);
+void	lcd_puts	(const char *s);
+void	lcd_printf	(const char *fmt, ...);
+
+#endif
diff --git a/include/pci_ids.h b/include/pci_ids.h
new file mode 100644
index 00000000000..87de6a9b7db
--- /dev/null
+++ b/include/pci_ids.h
@@ -0,0 +1,1524 @@
+/*
+ *	PCI Class, Vendor and Device IDs
+ *
+ *	Please keep sorted.
+ */
+
+/* Device classes and subclasses */
+
+#define PCI_CLASS_NOT_DEFINED		0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
+
+#define PCI_BASE_CLASS_STORAGE		0x01
+#define PCI_CLASS_STORAGE_SCSI		0x0100
+#define PCI_CLASS_STORAGE_IDE		0x0101
+#define PCI_CLASS_STORAGE_FLOPPY	0x0102
+#define PCI_CLASS_STORAGE_IPI		0x0103
+#define PCI_CLASS_STORAGE_RAID		0x0104
+#define PCI_CLASS_STORAGE_OTHER		0x0180
+
+#define PCI_BASE_CLASS_NETWORK		0x02
+#define PCI_CLASS_NETWORK_ETHERNET	0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
+#define PCI_CLASS_NETWORK_FDDI		0x0202
+#define PCI_CLASS_NETWORK_ATM		0x0203
+#define PCI_CLASS_NETWORK_OTHER		0x0280
+
+#define PCI_BASE_CLASS_DISPLAY		0x03
+#define PCI_CLASS_DISPLAY_VGA		0x0300
+#define PCI_CLASS_DISPLAY_XGA		0x0301
+#define PCI_CLASS_DISPLAY_3D		0x0302
+#define PCI_CLASS_DISPLAY_OTHER		0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA	0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
+#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
+#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
+
+#define PCI_BASE_CLASS_MEMORY		0x05
+#define PCI_CLASS_MEMORY_RAM		0x0500
+#define PCI_CLASS_MEMORY_FLASH		0x0501
+#define PCI_CLASS_MEMORY_OTHER		0x0580
+
+#define PCI_BASE_CLASS_BRIDGE		0x06
+#define PCI_CLASS_BRIDGE_HOST		0x0600
+#define PCI_CLASS_BRIDGE_ISA		0x0601
+#define PCI_CLASS_BRIDGE_EISA		0x0602
+#define PCI_CLASS_BRIDGE_MC		0x0603
+#define PCI_CLASS_BRIDGE_PCI		0x0604
+#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
+#define PCI_CLASS_BRIDGE_NUBUS		0x0606
+#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
+#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
+#define PCI_CLASS_BRIDGE_OTHER		0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION	0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
+#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
+#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
+
+#define PCI_BASE_CLASS_SYSTEM		0x08
+#define PCI_CLASS_SYSTEM_PIC		0x0800
+#define PCI_CLASS_SYSTEM_DMA		0x0801
+#define PCI_CLASS_SYSTEM_TIMER		0x0802
+#define PCI_CLASS_SYSTEM_RTC		0x0803
+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
+#define PCI_CLASS_SYSTEM_OTHER		0x0880
+
+#define PCI_BASE_CLASS_INPUT		0x09
+#define PCI_CLASS_INPUT_KEYBOARD	0x0900
+#define PCI_CLASS_INPUT_PEN		0x0901
+#define PCI_CLASS_INPUT_MOUSE		0x0902
+#define PCI_CLASS_INPUT_SCANNER		0x0903
+#define PCI_CLASS_INPUT_GAMEPORT	0x0904
+#define PCI_CLASS_INPUT_OTHER		0x0980
+
+#define PCI_BASE_CLASS_DOCKING		0x0a
+#define PCI_CLASS_DOCKING_GENERIC	0x0a00
+#define PCI_CLASS_DOCKING_OTHER		0x0a80
+
+#define PCI_BASE_CLASS_PROCESSOR	0x0b
+#define PCI_CLASS_PROCESSOR_386		0x0b00
+#define PCI_CLASS_PROCESSOR_486		0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
+#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
+#define PCI_CLASS_PROCESSOR_CO		0x0b40
+
+#define PCI_BASE_CLASS_SERIAL		0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
+#define PCI_CLASS_SERIAL_ACCESS		0x0c01
+#define PCI_CLASS_SERIAL_SSA		0x0c02
+#define PCI_CLASS_SERIAL_USB		0x0c03
+#define PCI_CLASS_SERIAL_FIBER		0x0c04
+#define PCI_CLASS_SERIAL_SMBUS		0x0c05
+
+#define PCI_BASE_CLASS_INTELLIGENT	0x0e
+#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
+
+#define PCI_BASE_CLASS_SATELLITE	0x0f
+#define PCI_CLASS_SATELLITE_TV		0x0f00
+#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
+#define PCI_CLASS_SATELLITE_VOICE	0x0f03
+#define PCI_CLASS_SATELLITE_DATA	0x0f04
+
+#define PCI_BASE_CLASS_CRYPT		0x10
+#define PCI_CLASS_CRYPT_NETWORK		0x1000
+#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
+#define PCI_CLASS_CRYPT_OTHER		0x1080
+
+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
+#define PCI_CLASS_SP_DPIO		0x1100
+#define PCI_CLASS_SP_OTHER		0x1180
+
+#define PCI_CLASS_OTHERS		0xff
+
+/* Vendors and devices.  Sort key: vendor first, device next. */
+
+#define PCI_VENDOR_ID_DYNALINK		0x0675
+#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
+
+#define PCI_VENDOR_ID_BERKOM			0x0871
+#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
+#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
+
+#define PCI_VENDOR_ID_COMPAQ		0x0e11
+#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
+#define PCI_DEVICE_ID_COMPAQ_1280	0x3033
+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX	0x4000
+#define PCI_DEVICE_ID_COMPAQ_6010	0x6010
+#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
+#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
+#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
+#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
+#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
+#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
+#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
+#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
+
+#define PCI_VENDOR_ID_NCR		0x1000
+#define PCI_DEVICE_ID_NCR_53C810	0x0001
+#define PCI_DEVICE_ID_NCR_53C820	0x0002
+#define PCI_DEVICE_ID_NCR_53C825	0x0003
+#define PCI_DEVICE_ID_NCR_53C815	0x0004
+#define PCI_DEVICE_ID_NCR_53C860	0x0006
+#define PCI_DEVICE_ID_NCR_53C896	0x000b
+#define PCI_DEVICE_ID_NCR_53C895	0x000c
+#define PCI_DEVICE_ID_NCR_53C885	0x000d
+#define PCI_DEVICE_ID_NCR_53C875	0x000f
+#define PCI_DEVICE_ID_NCR_53C1510	0x0010
+#define PCI_DEVICE_ID_NCR_53C875J	0x008f
+#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
+
+#define PCI_VENDOR_ID_ATI		0x1002
+#define PCI_DEVICE_ID_ATI_68800		0x4158
+#define PCI_DEVICE_ID_ATI_215CT222	0x4354
+#define PCI_DEVICE_ID_ATI_210888CX	0x4358
+#define PCI_DEVICE_ID_ATI_215GB		0x4742
+#define PCI_DEVICE_ID_ATI_215GD		0x4744
+#define PCI_DEVICE_ID_ATI_215GI		0x4749
+#define PCI_DEVICE_ID_ATI_215GP		0x4750
+#define PCI_DEVICE_ID_ATI_215GQ		0x4751
+#define PCI_DEVICE_ID_ATI_215GT		0x4754
+#define PCI_DEVICE_ID_ATI_215GTB	0x4755
+#define PCI_DEVICE_ID_ATI_210888GX	0x4758
+#define PCI_DEVICE_ID_ATI_215LG		0x4c47
+#define PCI_DEVICE_ID_ATI_264LT		0x4c54
+#define PCI_DEVICE_ID_ATI_264VT		0x5654
+#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
+#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
+#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
+#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
+#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
+#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
+#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
+#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
+
+#define PCI_VENDOR_ID_VLSI		0x1004
+#define PCI_DEVICE_ID_VLSI_82C592	0x0005
+#define PCI_DEVICE_ID_VLSI_82C593	0x0006
+#define PCI_DEVICE_ID_VLSI_82C594	0x0007
+#define PCI_DEVICE_ID_VLSI_82C597	0x0009
+#define PCI_DEVICE_ID_VLSI_82C541	0x000c
+#define PCI_DEVICE_ID_VLSI_82C543	0x000d
+#define PCI_DEVICE_ID_VLSI_82C532	0x0101
+#define PCI_DEVICE_ID_VLSI_82C534	0x0102
+#define PCI_DEVICE_ID_VLSI_82C535	0x0104
+#define PCI_DEVICE_ID_VLSI_82C147	0x0105
+#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
+
+#define PCI_VENDOR_ID_ADL		0x1005
+#define PCI_DEVICE_ID_ADL_2301		0x2301
+
+#define PCI_VENDOR_ID_NS		0x100b
+#define PCI_DEVICE_ID_NS_83815		0x0020
+#define PCI_DEVICE_ID_NS_8382x		0x0022
+#define PCI_DEVICE_ID_NS_87415		0x0002
+#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
+#define PCI_DEVICE_ID_NS_87560_USB	0x0012
+#define PCI_DEVICE_ID_NS_87410		0xd001
+
+#define PCI_VENDOR_ID_TSENG		0x100c
+#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
+#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
+#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
+#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
+#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
+
+#define PCI_VENDOR_ID_WEITEK		0x100e
+#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
+#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
+
+#define PCI_VENDOR_ID_DEC		0x1011
+#define PCI_DEVICE_ID_DEC_BRD		0x0001
+#define PCI_DEVICE_ID_DEC_TULIP		0x0002
+#define PCI_DEVICE_ID_DEC_TGA		0x0004
+#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
+#define PCI_DEVICE_ID_DEC_TGA2		0x000D
+#define PCI_DEVICE_ID_DEC_FDDI		0x000F
+#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
+#define PCI_DEVICE_ID_DEC_21142		0x0019
+#define PCI_DEVICE_ID_DEC_21052		0x0021
+#define PCI_DEVICE_ID_DEC_21150		0x0022
+#define PCI_DEVICE_ID_DEC_21152		0x0024
+#define PCI_DEVICE_ID_DEC_21153		0x0025
+#define PCI_DEVICE_ID_DEC_21154		0x0026
+#define PCI_DEVICE_ID_DEC_21285		0x1065
+#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
+
+#define PCI_VENDOR_ID_CIRRUS		0x1013
+#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
+#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
+#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
+#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
+#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
+#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
+#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
+#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
+#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
+#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
+#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
+#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
+#define PCI_DEVICE_ID_CIRRUS_7542	0x1200
+#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
+#define PCI_DEVICE_ID_CIRRUS_7541	0x1204
+
+#define PCI_VENDOR_ID_IBM		0x1014
+#define PCI_DEVICE_ID_IBM_FIRE_CORAL	0x000a
+#define PCI_DEVICE_ID_IBM_TR		0x0018
+#define PCI_DEVICE_ID_IBM_82G2675	0x001d
+#define PCI_DEVICE_ID_IBM_MCA		0x0020
+#define PCI_DEVICE_ID_IBM_82351		0x0022
+#define PCI_DEVICE_ID_IBM_PYTHON	0x002d
+#define PCI_DEVICE_ID_IBM_SERVERAID	0x002e
+#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
+#define PCI_DEVICE_ID_IBM_MPIC		0x0046
+#define PCI_DEVICE_ID_IBM_3780IDSP	0x007d
+#define PCI_DEVICE_ID_IBM_CPC700	0x00f9
+#define PCI_DEVICE_ID_IBM_CPC710_PCI64	0x00fc
+#define PCI_DEVICE_ID_IBM_CPC710_PCI32	0x0105
+#define	PCI_DEVICE_ID_IBM_405GP		0x0156
+#define PCI_DEVICE_ID_IBM_MPIC_2	0xffff
+
+#define PCI_VENDOR_ID_COMPEX2		0x101a /* pci.ids says "AT&T GIS (NCR)" */
+#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
+
+#define PCI_VENDOR_ID_WD		0x101c
+#define PCI_DEVICE_ID_WD_7197		0x3296
+
+#define PCI_VENDOR_ID_AMI		0x101e
+#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
+#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
+#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
+
+#define PCI_VENDOR_ID_AMD		0x1022
+#define PCI_DEVICE_ID_AMD_LANCE		0x2000
+#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
+#define PCI_DEVICE_ID_AMD_SCSI		0x2020
+#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
+#define PCI_DEVICE_ID_AMD_COBRA_7400	0x7400
+#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
+#define PCI_DEVICE_ID_AMD_COBRA_7403	0x7403
+#define PCI_DEVICE_ID_AMD_COBRA_7404	0x7404
+#define PCI_DEVICE_ID_AMD_VIPER_7408	0x7408
+#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
+#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
+#define PCI_DEVICE_ID_AMD_VIPER_740C	0x740C
+
+#define PCI_VENDOR_ID_TRIDENT		0x1023
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
+#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
+#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
+#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
+#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
+#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
+#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
+#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
+#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
+#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
+#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
+#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
+#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
+#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
+#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
+#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
+
+#define PCI_VENDOR_ID_AI		0x1025
+#define PCI_DEVICE_ID_AI_M1435		0x1435
+
+#define PCI_VENDOR_ID_MATROX		0x102B
+#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
+#define PCI_DEVICE_ID_MATROX_MIL	0x0519
+#define PCI_DEVICE_ID_MATROX_MYS	0x051A
+#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
+#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
+#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
+#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
+#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
+#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
+#define	PCI_DEVICE_ID_MATROX_G400	0x0525
+#define PCI_DEVICE_ID_MATROX_VIA	0x4536
+
+#define PCI_VENDOR_ID_CT		0x102c
+#define PCI_DEVICE_ID_CT_65545		0x00d8
+#define PCI_DEVICE_ID_CT_65548		0x00dc
+#define PCI_DEVICE_ID_CT_65550		0x00e0
+#define PCI_DEVICE_ID_CT_65554		0x00e4
+#define PCI_DEVICE_ID_CT_65555		0x00e5
+#define PCI_DEVICE_ID_CT_69000		0x00c0
+
+#define PCI_VENDOR_ID_MIRO		0x1031
+#define PCI_DEVICE_ID_MIRO_36050	0x5601
+
+#define PCI_VENDOR_ID_NEC		0x1033
+#define PCI_DEVICE_ID_NEC_PCX2		0x0046
+#define PCI_DEVICE_ID_NEC_NILE4		0x005a
+
+#define PCI_VENDOR_ID_FD		0x1036
+#define PCI_DEVICE_ID_FD_36C70		0x0000
+
+#define PCI_VENDOR_ID_SI		0x1039
+#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
+#define PCI_DEVICE_ID_SI_6202		0x0002
+#define PCI_DEVICE_ID_SI_503		0x0008
+#define PCI_DEVICE_ID_SI_ACPI		0x0009
+#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
+#define PCI_DEVICE_ID_SI_6205		0x0205
+#define PCI_DEVICE_ID_SI_501		0x0406
+#define PCI_DEVICE_ID_SI_496		0x0496
+#define PCI_DEVICE_ID_SI_300		0x0300
+#define PCI_DEVICE_ID_SI_530		0x0530
+#define PCI_DEVICE_ID_SI_540		0x0540
+#define PCI_DEVICE_ID_SI_540_VGA	0x5300
+#define PCI_DEVICE_ID_SI_601		0x0601
+#define PCI_DEVICE_ID_SI_620		0x0620
+#define PCI_DEVICE_ID_SI_630		0x0630
+#define PCI_DEVICE_ID_SI_730		0x0730
+#define PCI_DEVICE_ID_SI_630_VGA	0x6300
+#define PCI_DEVICE_ID_SI_730_VGA	0x7300
+#define PCI_DEVICE_ID_SI_5107		0x5107
+#define PCI_DEVICE_ID_SI_5300		0x5300
+#define PCI_DEVICE_ID_SI_5511		0x5511
+#define PCI_DEVICE_ID_SI_5513		0x5513
+#define PCI_DEVICE_ID_SI_5571		0x5571
+#define PCI_DEVICE_ID_SI_5591		0x5591
+#define PCI_DEVICE_ID_SI_5597		0x5597
+#define PCI_DEVICE_ID_SI_5598		0x5598
+#define PCI_DEVICE_ID_SI_5600		0x5600
+#define PCI_DEVICE_ID_SI_6300		0x6300
+#define PCI_DEVICE_ID_SI_6306		0x6306
+#define PCI_DEVICE_ID_SI_6326		0x6326
+#define PCI_DEVICE_ID_SI_7001		0x7001
+
+#define PCI_VENDOR_ID_HP		0x103c
+#define PCI_DEVICE_ID_HP_J2585A		0x1030
+#define PCI_DEVICE_ID_HP_J2585B		0x1031
+
+#define PCI_VENDOR_ID_PCTECH		0x1042
+#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
+#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0	0x3000
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1	0x3010
+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
+
+#define PCI_VENDOR_ID_ASUSTEK		0x1043
+#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
+
+#define PCI_VENDOR_ID_DPT		0x1044
+#define PCI_DEVICE_ID_DPT		0xa400
+
+#define PCI_VENDOR_ID_OPTI		0x1045
+#define PCI_DEVICE_ID_OPTI_92C178	0xc178
+#define PCI_DEVICE_ID_OPTI_82C557	0xc557
+#define PCI_DEVICE_ID_OPTI_82C558	0xc558
+#define PCI_DEVICE_ID_OPTI_82C621	0xc621
+#define PCI_DEVICE_ID_OPTI_82C700	0xc700
+#define PCI_DEVICE_ID_OPTI_82C701	0xc701
+#define PCI_DEVICE_ID_OPTI_82C814	0xc814
+#define PCI_DEVICE_ID_OPTI_82C822	0xc822
+#define PCI_DEVICE_ID_OPTI_82C861	0xc861
+#define PCI_DEVICE_ID_OPTI_82C825	0xd568
+
+#define PCI_VENDOR_ID_ELSA		0x1048
+#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
+#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
+
+#define PCI_VENDOR_ID_SGS		0x104a
+#define PCI_DEVICE_ID_SGS_2000		0x0008
+#define PCI_DEVICE_ID_SGS_1764		0x0009
+
+#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
+
+#define PCI_VENDOR_ID_TI		0x104c
+#define PCI_DEVICE_ID_TI_TVP4010	0x3d04
+#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
+#define PCI_DEVICE_ID_TI_1130		0xac12
+#define PCI_DEVICE_ID_TI_1031		0xac13
+#define PCI_DEVICE_ID_TI_1131		0xac15
+#define PCI_DEVICE_ID_TI_1250		0xac16
+#define PCI_DEVICE_ID_TI_1220		0xac17
+#define PCI_DEVICE_ID_TI_1221		0xac19
+#define PCI_DEVICE_ID_TI_1210		0xac1a
+#define PCI_DEVICE_ID_TI_1450		0xac1b
+#define PCI_DEVICE_ID_TI_1225		0xac1c
+#define PCI_DEVICE_ID_TI_1251A		0xac1d
+#define PCI_DEVICE_ID_TI_1211		0xac1e
+#define PCI_DEVICE_ID_TI_1251B		0xac1f
+#define PCI_DEVICE_ID_TI_1420		0xac51
+
+#define PCI_VENDOR_ID_SONY		0x104d
+#define PCI_DEVICE_ID_SONY_CXD3222	0x8039
+
+#define PCI_VENDOR_ID_OAK		0x104e
+#define PCI_DEVICE_ID_OAK_OTI107	0x0107
+
+/* Winbond have two vendor IDs! See 0x10ad as well */
+#define PCI_VENDOR_ID_WINBOND2		0x1050
+#define PCI_DEVICE_ID_WINBOND2_89C940	0x0940
+#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
+#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
+
+#define PCI_VENDOR_ID_ANIGMA		0x1051
+#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
+
+#define PCI_VENDOR_ID_EFAR		0x1055
+#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0	0x9460
+#define PCI_DEVICE_ID_EFAR_SLC90E66_2	0x9462
+#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
+
+#define PCI_VENDOR_ID_MOTOROLA		0x1057
+#define PCI_VENDOR_ID_MOTOROLA_OOPS	0x1507
+#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
+#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
+#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
+#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
+#define PCI_DEVICE_ID_MOTOROLA_HAWK	0x4803
+#define PCI_DEVICE_ID_MOTOROLA_CPX8216	0x4806
+#define PCI_DEVICE_ID_MOTOROLA_MPC190	0x6400
+
+#define PCI_VENDOR_ID_PROMISE		0x105a
+#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
+#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
+#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
+#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
+#define PCI_DEVICE_ID_PROMISE_5300	0x5300
+
+#define PCI_VENDOR_ID_N9		0x105d
+#define PCI_DEVICE_ID_N9_I128		0x2309
+#define PCI_DEVICE_ID_N9_I128_2		0x2339
+#define PCI_DEVICE_ID_N9_I128_T2R	0x493d
+
+#define PCI_VENDOR_ID_UMC		0x1060
+#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
+#define PCI_DEVICE_ID_UMC_UM8891A	0x0891
+#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
+#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
+#define PCI_DEVICE_ID_UMC_UM8881F	0x8881
+#define PCI_DEVICE_ID_UMC_UM8886F	0x8886
+#define PCI_DEVICE_ID_UMC_UM9017F	0x9017
+#define PCI_DEVICE_ID_UMC_UM8886N	0xe886
+#define PCI_DEVICE_ID_UMC_UM8891N	0xe891
+
+#define PCI_VENDOR_ID_X			0x1061
+#define PCI_DEVICE_ID_X_AGX016		0x0001
+
+#define PCI_VENDOR_ID_MYLEX		0x1069
+#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
+#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
+#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
+#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
+#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
+#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
+
+#define PCI_VENDOR_ID_PICOP		0x1066
+#define PCI_DEVICE_ID_PICOP_PT86C52X	0x0001
+#define PCI_DEVICE_ID_PICOP_PT80C524	0x8002
+
+#define PCI_VENDOR_ID_APPLE		0x106b
+#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
+#define PCI_DEVICE_ID_APPLE_GC		0x0002
+#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
+#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
+#define PCI_DEVICE_ID_APPLE_KL_USB	0x0019
+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
+
+#define PCI_VENDOR_ID_YAMAHA		0x1073
+#define PCI_DEVICE_ID_YAMAHA_724	0x0004
+#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
+#define PCI_DEVICE_ID_YAMAHA_740	0x000a
+#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
+#define PCI_DEVICE_ID_YAMAHA_744	0x0010
+#define PCI_DEVICE_ID_YAMAHA_754	0x0012
+
+#define PCI_VENDOR_ID_NEXGEN		0x1074
+#define PCI_DEVICE_ID_NEXGEN_82C501	0x4e78
+
+#define PCI_VENDOR_ID_QLOGIC		0x1077
+#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
+#define PCI_DEVICE_ID_QLOGIC_ISP1022	0x1022
+#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
+#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
+
+#define PCI_VENDOR_ID_CYRIX		0x1078
+#define PCI_DEVICE_ID_CYRIX_5510	0x0000
+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
+#define PCI_DEVICE_ID_CYRIX_5520	0x0002
+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
+#define PCI_DEVICE_ID_CYRIX_5530_SMI	0x0101
+#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
+
+#define PCI_VENDOR_ID_LEADTEK		0x107d
+#define PCI_DEVICE_ID_LEADTEK_805	0x0000
+
+#define PCI_VENDOR_ID_INTERPHASE	0x107e
+#define PCI_DEVICE_ID_INTERPHASE_5526	0x0004
+#define PCI_DEVICE_ID_INTERPHASE_55x6	0x0005
+#define PCI_DEVICE_ID_INTERPHASE_5575	0x0008
+
+#define PCI_VENDOR_ID_CONTAQ		0x1080
+#define PCI_DEVICE_ID_CONTAQ_82C599	0x0600
+#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
+
+#define PCI_VENDOR_ID_FOREX		0x1083
+
+#define PCI_VENDOR_ID_OLICOM		0x108d
+#define PCI_DEVICE_ID_OLICOM_OC3136	0x0001
+#define PCI_DEVICE_ID_OLICOM_OC2315	0x0011
+#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
+#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
+#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
+#define PCI_DEVICE_ID_OLICOM_OC6151	0x0021
+
+#define PCI_VENDOR_ID_SUN		0x108e
+#define PCI_DEVICE_ID_SUN_EBUS		0x1000
+#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
+#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
+#define PCI_DEVICE_ID_SUN_PBM		0x8000
+#define PCI_DEVICE_ID_SUN_SABRE		0xa000
+
+#define PCI_VENDOR_ID_CMD		0x1095
+#define PCI_DEVICE_ID_CMD_640		0x0640
+#define PCI_DEVICE_ID_CMD_643		0x0643
+#define PCI_DEVICE_ID_CMD_646		0x0646
+#define PCI_DEVICE_ID_CMD_647		0x0647
+#define PCI_DEVICE_ID_CMD_648		0x0648
+#define PCI_DEVICE_ID_CMD_649		0x0649
+#define PCI_DEVICE_ID_CMD_670		0x0670
+
+#define PCI_VENDOR_ID_VISION		0x1098
+#define PCI_DEVICE_ID_VISION_QD8500	0x0001
+#define PCI_DEVICE_ID_VISION_QD8580	0x0002
+
+#define PCI_VENDOR_ID_BROOKTREE		0x109e
+#define PCI_DEVICE_ID_BROOKTREE_848	0x0350
+#define PCI_DEVICE_ID_BROOKTREE_849A	0x0351
+#define PCI_DEVICE_ID_BROOKTREE_878_1	0x036e
+#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
+#define PCI_DEVICE_ID_BROOKTREE_8474	0x8474
+
+#define PCI_VENDOR_ID_SIERRA		0x10a8
+#define PCI_DEVICE_ID_SIERRA_STB	0x0000
+
+#define PCI_VENDOR_ID_SGI		0x10a9
+#define PCI_DEVICE_ID_SGI_IOC3		0x0003
+
+#define PCI_VENDOR_ID_ACC		0x10aa
+#define PCI_DEVICE_ID_ACC_2056		0x0000
+
+#define PCI_VENDOR_ID_WINBOND		0x10ad
+#define PCI_DEVICE_ID_WINBOND_83769	0x0001
+#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
+#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
+
+#define PCI_VENDOR_ID_DATABOOK		0x10b3
+#define PCI_DEVICE_ID_DATABOOK_87144	0xb106
+
+#define PCI_VENDOR_ID_PLX		0x10b5
+#define PCI_DEVICE_ID_PLX_R685		0x1030
+#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
+#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
+#define PCI_DEVICE_ID_PLX_1077		0x1077
+#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
+#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
+#define PCI_DEVICE_ID_PLX_R753		0x1152
+#define PCI_DEVICE_ID_PLX_9050		0x9050
+#define PCI_DEVICE_ID_PLX_9060		0x9060
+#define PCI_DEVICE_ID_PLX_9060ES	0x906E
+#define PCI_DEVICE_ID_PLX_9060SD	0x906D
+#define PCI_DEVICE_ID_PLX_9080		0x9080
+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
+
+#define PCI_VENDOR_ID_MADGE		0x10b6
+#define PCI_DEVICE_ID_MADGE_MK2		0x0002
+#define PCI_DEVICE_ID_MADGE_C155S	0x1001
+
+#define PCI_VENDOR_ID_3COM		0x10b7
+#define PCI_DEVICE_ID_3COM_3C985	0x0001
+#define PCI_DEVICE_ID_3COM_3C339	0x3390
+#define PCI_DEVICE_ID_3COM_3C590	0x5900
+#define PCI_DEVICE_ID_3COM_3C595TX	0x5950
+#define PCI_DEVICE_ID_3COM_3C595T4	0x5951
+#define PCI_DEVICE_ID_3COM_3C595MII	0x5952
+#define PCI_DEVICE_ID_3COM_3C900TPO	0x9000
+#define PCI_DEVICE_ID_3COM_3C900COMBO	0x9001
+#define PCI_DEVICE_ID_3COM_3C905TX	0x9050
+#define PCI_DEVICE_ID_3COM_3C905T4	0x9051
+#define PCI_DEVICE_ID_3COM_3C905B_TX	0x9055
+
+#define PCI_VENDOR_ID_SMC		0x10b8
+#define PCI_DEVICE_ID_SMC_EPIC100	0x0005
+
+#define PCI_VENDOR_ID_AL		0x10b9
+#define PCI_DEVICE_ID_AL_M1445		0x1445
+#define PCI_DEVICE_ID_AL_M1449		0x1449
+#define PCI_DEVICE_ID_AL_M1451		0x1451
+#define PCI_DEVICE_ID_AL_M1461		0x1461
+#define PCI_DEVICE_ID_AL_M1489		0x1489
+#define PCI_DEVICE_ID_AL_M1511		0x1511
+#define PCI_DEVICE_ID_AL_M1513		0x1513
+#define PCI_DEVICE_ID_AL_M1521		0x1521
+#define PCI_DEVICE_ID_AL_M1523		0x1523
+#define PCI_DEVICE_ID_AL_M1531		0x1531
+#define PCI_DEVICE_ID_AL_M1533		0x1533
+#define PCI_DEVICE_ID_AL_M1541		0x1541
+#define PCI_DEVICE_ID_AL_M1543		0x1543
+#define PCI_DEVICE_ID_AL_M3307		0x3307
+#define PCI_DEVICE_ID_AL_M4803		0x5215
+#define PCI_DEVICE_ID_AL_M5219		0x5219
+#define PCI_DEVICE_ID_AL_M5229		0x5229
+#define PCI_DEVICE_ID_AL_M5237		0x5237
+#define PCI_DEVICE_ID_AL_M5243		0x5243
+#define PCI_DEVICE_ID_AL_M5451		0x5451
+#define PCI_DEVICE_ID_AL_M7101		0x7101
+
+#define PCI_VENDOR_ID_MITSUBISHI	0x10ba
+
+#define PCI_VENDOR_ID_SURECOM		0x10bd
+#define PCI_DEVICE_ID_SURECOM_NE34	0x0e34
+
+#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV       0x0005
+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS   0x0083
+
+#define PCI_VENDOR_ID_ASP		0x10cd
+#define PCI_DEVICE_ID_ASP_ABP940	0x1200
+#define PCI_DEVICE_ID_ASP_ABP940U	0x1300
+#define PCI_DEVICE_ID_ASP_ABP940UW	0x2300
+
+#define PCI_VENDOR_ID_MACRONIX		0x10d9
+#define PCI_DEVICE_ID_MACRONIX_MX98713	0x0512
+#define PCI_DEVICE_ID_MACRONIX_MX987x5	0x0531
+
+#define PCI_VENDOR_ID_TCONRAD		0x10da
+#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
+
+#define PCI_VENDOR_ID_CERN		0x10dc
+#define PCI_DEVICE_ID_CERN_SPSB_PMC	0x0001
+#define PCI_DEVICE_ID_CERN_SPSB_PCI	0x0002
+#define PCI_DEVICE_ID_CERN_HIPPI_DST	0x0021
+#define PCI_DEVICE_ID_CERN_HIPPI_SRC	0x0022
+
+#define PCI_VENDOR_ID_NVIDIA			0x10de
+#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
+#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
+#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
+#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
+#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
+#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
+#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
+
+#define PCI_VENDOR_ID_IMS		0x10e0
+#define PCI_DEVICE_ID_IMS_8849		0x8849
+
+#define PCI_VENDOR_ID_TEKRAM2		0x10e1
+#define PCI_DEVICE_ID_TEKRAM2_690c	0x690c
+
+#define PCI_VENDOR_ID_TUNDRA		0x10e3
+#define PCI_DEVICE_ID_TUNDRA_CA91C042	0x0000
+
+#define PCI_VENDOR_ID_AMCC		0x10e8
+#define PCI_DEVICE_ID_AMCC_MYRINET	0x8043
+#define PCI_DEVICE_ID_AMCC_PARASTATION	0x8062
+#define PCI_DEVICE_ID_AMCC_S5933	0x807d
+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3	0x809c
+
+#define PCI_VENDOR_ID_INTERG		0x10ea
+#define PCI_DEVICE_ID_INTERG_1680	0x1680
+#define PCI_DEVICE_ID_INTERG_1682	0x1682
+#define PCI_DEVICE_ID_INTERG_2000	0x2000
+#define PCI_DEVICE_ID_INTERG_2010	0x2010
+#define PCI_DEVICE_ID_INTERG_5000	0x5000
+
+#define PCI_VENDOR_ID_REALTEK		0x10ec
+#define PCI_DEVICE_ID_REALTEK_8029	0x8029
+#define PCI_DEVICE_ID_REALTEK_8129	0x8129
+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
+
+#define PCI_VENDOR_ID_TRUEVISION	0x10fa
+#define PCI_DEVICE_ID_TRUEVISION_T1000	0x000c
+
+#define PCI_VENDOR_ID_INIT		0x1101
+#define PCI_DEVICE_ID_INIT_320P		0x9100
+#define PCI_DEVICE_ID_INIT_360P		0x9500
+
+#define PCI_VENDOR_ID_CREATIVE		0x1102 /* duplicate: ECTIVA */
+#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
+
+#define PCI_VENDOR_ID_ECTIVA		0x1102 /* duplicate: CREATIVE */
+#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
+
+#define PCI_VENDOR_ID_TTI		0x1103
+#define PCI_DEVICE_ID_TTI_HPT343	0x0003
+#define PCI_DEVICE_ID_TTI_HPT366	0x0004
+
+#define PCI_VENDOR_ID_VIA		0x1106
+#define PCI_DEVICE_ID_VIA_8363_0	0x0305
+#define PCI_DEVICE_ID_VIA_8371_0	0x0391
+#define PCI_DEVICE_ID_VIA_8501_0	0x0501
+#define PCI_DEVICE_ID_VIA_82C505	0x0505
+#define PCI_DEVICE_ID_VIA_82C561	0x0561
+#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
+#define PCI_DEVICE_ID_VIA_82C576	0x0576
+#define PCI_DEVICE_ID_VIA_82C585	0x0585
+#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
+#define PCI_DEVICE_ID_VIA_82C595	0x0595
+#define PCI_DEVICE_ID_VIA_82C596	0x0596
+#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
+#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
+#define PCI_DEVICE_ID_VIA_8601_0	0x0601
+#define PCI_DEVICE_ID_VIA_8605_0	0x0605
+#define PCI_DEVICE_ID_VIA_82C680	0x0680
+#define PCI_DEVICE_ID_VIA_82C686	0x0686
+#define PCI_DEVICE_ID_VIA_82C691	0x0691
+#define PCI_DEVICE_ID_VIA_82C693	0x0693
+#define PCI_DEVICE_ID_VIA_82C693_1	0x0698
+#define PCI_DEVICE_ID_VIA_82C926	0x0926
+#define PCI_DEVICE_ID_VIA_82C416	0x1571
+#define PCI_DEVICE_ID_VIA_82C595_97	0x1595
+#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
+#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
+#define PCI_DEVICE_ID_VIA_6305		0x3044
+#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
+#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
+#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
+#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
+#define PCI_DEVICE_ID_VIA_8233_5	0x3059
+#define PCI_DEVICE_ID_VIA_8233_7	0x3065
+#define PCI_DEVICE_ID_VIA_82C686_6	0x3068
+#define PCI_DEVICE_ID_VIA_8233_0	0x3074
+#define PCI_DEVICE_ID_VIA_8633_0	0x3091
+#define PCI_DEVICE_ID_VIA_8367_0	0x3099
+#define PCI_DEVICE_ID_VIA_86C100A	0x6100
+#define PCI_DEVICE_ID_VIA_8231		0x8231
+#define PCI_DEVICE_ID_VIA_8231_4	0x8235
+#define PCI_DEVICE_ID_VIA_8365_1	0x8305
+#define PCI_DEVICE_ID_VIA_8371_1	0x8391
+#define PCI_DEVICE_ID_VIA_8501_1	0x8501
+#define PCI_DEVICE_ID_VIA_82C597_1	0x8597
+#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
+#define PCI_DEVICE_ID_VIA_8601_1	0x8601
+#define PCI_DEVICE_ID_VIA_8505_1	0X8605
+#define PCI_DEVICE_ID_VIA_8633_1	0xB091
+#define PCI_DEVICE_ID_VIA_8367_1	0xB099
+
+#define PCI_VENDOR_ID_SMC2		0x1113
+#define PCI_DEVICE_ID_SMC2_1211TX	0x1211
+
+#define PCI_VENDOR_ID_VORTEX		0x1119
+#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
+#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
+#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
+#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
+#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
+#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
+#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
+#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
+#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
+#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
+#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
+#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
+#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
+#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1	0x0110
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1	0x0111
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1	0x0112
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1	0x0113
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1	0x0114
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1	0x0115
+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2	0x0120
+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2	0x0121
+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2	0x0122
+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2	0x0123
+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2	0x0124
+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2	0x0125
+
+#define PCI_VENDOR_ID_EF		0x111a
+#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
+#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
+
+#define PCI_VENDOR_ID_IDT		0x111d
+#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
+
+#define PCI_VENDOR_ID_FORE		0x1127
+#define PCI_DEVICE_ID_FORE_PCA200PC	0x0210
+#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
+
+#define PCI_VENDOR_ID_IMAGINGTECH	0x112f
+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI	0x0000
+
+#define PCI_VENDOR_ID_PHILIPS		0x1131
+#define PCI_DEVICE_ID_PHILIPS_SAA7145	0x7145
+#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
+
+#define PCI_VENDOR_ID_EICON		0x1133
+#define PCI_DEVICE_ID_EICON_DIVA20PRO	0xe001
+#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U	0xe003
+#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
+#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
+#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
+#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
+#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
+
+#define PCI_VENDOR_ID_CYCLONE		0x113c
+#define PCI_DEVICE_ID_CYCLONE_SDK	0x0001
+
+#define PCI_VENDOR_ID_ALLIANCE		0x1142
+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO	0x3210
+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO	0x6422
+#define PCI_DEVICE_ID_ALLIANCE_AT24	0x6424
+#define PCI_DEVICE_ID_ALLIANCE_AT3D	0x643d
+
+#define PCI_VENDOR_ID_SYSKONNECT	0x1148
+#define PCI_DEVICE_ID_SYSKONNECT_FP	0x4000
+#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
+#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
+
+#define PCI_VENDOR_ID_VMIC		0x114a
+#define PCI_DEVICE_ID_VMIC_VME		0x7587
+
+#define PCI_VENDOR_ID_DIGI		0x114f
+#define PCI_DEVICE_ID_DIGI_EPC		0x0002
+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH	0x0003
+#define PCI_DEVICE_ID_DIGI_XEM		0x0004
+#define PCI_DEVICE_ID_DIGI_XR		0x0005
+#define PCI_DEVICE_ID_DIGI_CX		0x0006
+#define PCI_DEVICE_ID_DIGI_XRJ		0x0009
+#define PCI_DEVICE_ID_DIGI_EPCJ		0x000a
+#define PCI_DEVICE_ID_DIGI_XR_920	0x0027
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
+#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
+#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
+
+#define PCI_VENDOR_ID_MUTECH		0x1159
+#define PCI_DEVICE_ID_MUTECH_MV1000	0x0001
+
+#define PCI_VENDOR_ID_RENDITION		0x1163
+#define PCI_DEVICE_ID_RENDITION_VERITE	0x0001
+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
+
+#define PCI_VENDOR_ID_SERVERWORKS	0x1166
+#define PCI_DEVICE_ID_SERVERWORKS_HE	0x0008
+#define PCI_DEVICE_ID_SERVERWORKS_LE	0x0009
+#define PCI_DEVICE_ID_SERVERWORKS_CIOB30   0x0010
+#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE  0x0011
+#define PCI_DEVICE_ID_SERVERWORKS_CSB5	   0x0201
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4	0x0200
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
+#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
+
+#define PCI_VENDOR_ID_SBE		0x1176
+#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
+#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
+#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
+
+#define PCI_VENDOR_ID_TOSHIBA		0x1179
+#define PCI_DEVICE_ID_TOSHIBA_601	0x0601
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
+
+#define PCI_VENDOR_ID_RICOH		0x1180
+#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
+#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
+#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
+#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
+#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
+
+#define PCI_VENDOR_ID_ARTOP		0x1191
+#define PCI_DEVICE_ID_ARTOP_ATP8400	0x0004
+#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
+#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
+#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
+#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
+#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
+#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
+#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
+#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
+#define PCI_DEVICE_ID_ARTOP_8060	0x8060
+
+#define PCI_VENDOR_ID_ZEITNET		0x1193
+#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
+#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
+
+#define PCI_VENDOR_ID_OMEGA		0x119b
+#define PCI_DEVICE_ID_OMEGA_82C092G	0x1221
+
+#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
+
+#define PCI_VENDOR_ID_GALILEO		0x11ab
+#define PCI_DEVICE_ID_GALILEO_GT64011	0x4146
+#define PCI_DEVICE_ID_GALILEO_GT64111	0x4146
+#define PCI_DEVICE_ID_GALILEO_GT96100	0x9652
+#define PCI_DEVICE_ID_GALILEO_GT96100A	0x9653
+
+#define PCI_VENDOR_ID_LITEON		0x11ad
+#define PCI_DEVICE_ID_LITEON_LNE100TX	0x0002
+
+#define PCI_VENDOR_ID_V3		0x11b0
+#define PCI_DEVICE_ID_V3_V960		0x0001
+#define PCI_DEVICE_ID_V3_V350		0x0001
+#define PCI_DEVICE_ID_V3_V961		0x0002
+#define PCI_DEVICE_ID_V3_V351		0x0002
+
+#define PCI_VENDOR_ID_NP		0x11bc
+#define PCI_DEVICE_ID_NP_PCI_FDDI	0x0001
+
+#define PCI_VENDOR_ID_ATT		0x11c1
+#define PCI_DEVICE_ID_ATT_L56XMF	0x0440
+#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
+
+#define PCI_VENDOR_ID_SPECIALIX		0x11cb
+#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
+#define PCI_DEVICE_ID_SPECIALIX_XIO	0x4000
+#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
+
+#define PCI_VENDOR_ID_AURAVISION	0x11d1
+#define PCI_DEVICE_ID_AURAVISION_VXP524	0x01f7
+
+#define PCI_VENDOR_ID_IKON		0x11d5
+#define PCI_DEVICE_ID_IKON_10115	0x0115
+#define PCI_DEVICE_ID_IKON_10117	0x0117
+
+#define PCI_VENDOR_ID_ZORAN		0x11de
+#define PCI_DEVICE_ID_ZORAN_36057	0x6057
+#define PCI_DEVICE_ID_ZORAN_36120	0x6120
+
+#define PCI_VENDOR_ID_KINETIC		0x11f4
+#define PCI_DEVICE_ID_KINETIC_2915	0x2915
+
+#define PCI_VENDOR_ID_COMPEX		0x11f6
+#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
+#define PCI_DEVICE_ID_COMPEX_RL2000	0x1401
+
+#define PCI_VENDOR_ID_RP		0x11fe
+#define PCI_DEVICE_ID_RP32INTF		0x0001
+#define PCI_DEVICE_ID_RP8INTF		0x0002
+#define PCI_DEVICE_ID_RP16INTF		0x0003
+#define PCI_DEVICE_ID_RP4QUAD		0x0004
+#define PCI_DEVICE_ID_RP8OCTA		0x0005
+#define PCI_DEVICE_ID_RP8J		0x0006
+#define PCI_DEVICE_ID_RPP4		0x000A
+#define PCI_DEVICE_ID_RPP8		0x000B
+#define PCI_DEVICE_ID_RP8M		0x000C
+
+#define PCI_VENDOR_ID_CYCLADES		0x120e
+#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
+#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
+#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
+#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
+#define PCI_DEVICE_ID_PC300_RX_2	0x0300
+#define PCI_DEVICE_ID_PC300_RX_1	0x0301
+#define PCI_DEVICE_ID_PC300_TE_2	0x0310
+#define PCI_DEVICE_ID_PC300_TE_1	0x0311
+
+#define PCI_VENDOR_ID_ESSENTIAL		0x120f
+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
+
+#define PCI_VENDOR_ID_O2		0x1217
+#define PCI_DEVICE_ID_O2_6729		0x6729
+#define PCI_DEVICE_ID_O2_6730		0x673a
+#define PCI_DEVICE_ID_O2_6832		0x6832
+#define PCI_DEVICE_ID_O2_6836		0x6836
+
+#define PCI_VENDOR_ID_3DFX		0x121a
+#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
+#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
+#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
+#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
+
+#define PCI_VENDOR_ID_SIGMADES		0x1236
+#define PCI_DEVICE_ID_SIGMADES_6425	0x6401
+
+#define PCI_VENDOR_ID_CCUBE		0x123f
+
+#define PCI_VENDOR_ID_AVM		0x1244
+#define PCI_DEVICE_ID_AVM_B1		0x0700
+#define PCI_DEVICE_ID_AVM_C4		0x0800
+#define PCI_DEVICE_ID_AVM_A1		0x0a00
+#define PCI_DEVICE_ID_AVM_T1		0x1200
+
+#define PCI_VENDOR_ID_DIPIX		0x1246
+
+#define PCI_VENDOR_ID_STALLION		0x124d
+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
+#define PCI_DEVICE_ID_STALLION_EIOPCI	0x0003
+
+#define PCI_VENDOR_ID_OPTIBASE		0x1255
+#define PCI_DEVICE_ID_OPTIBASE_FORGE	0x1110
+#define PCI_DEVICE_ID_OPTIBASE_FUSION	0x1210
+#define PCI_DEVICE_ID_OPTIBASE_VPLEX	0x2110
+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC	0x2120
+#define PCI_DEVICE_ID_OPTIBASE_VQUEST	0x2130
+
+#define PCI_VENDOR_ID_ESS		0x125d
+#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
+#define PCI_DEVICE_ID_ESS_AUDIOPCI	0x1969
+#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
+
+#define PCI_VENDOR_ID_SATSAGEM		0x1267
+#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
+#define PCI_DEVICE_ID_SATSAGEM_PCR2101	0x5352
+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
+
+#define PCI_VENDOR_ID_HUGHES		0x1273
+#define PCI_DEVICE_ID_HUGHES_DIRECPC	0x0002
+
+#define PCI_VENDOR_ID_ENSONIQ		0x1274
+#define PCI_DEVICE_ID_ENSONIQ_AUDIOPCI	0x5000
+#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
+
+#define PCI_VENDOR_ID_ROCKWELL		0x127A
+
+#define PCI_VENDOR_ID_ITE		0x1283
+#define PCI_DEVICE_ID_ITE_IT8172G	0x8172
+#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
+
+/* formerly Platform Tech */
+#define PCI_VENDOR_ID_ESS_OLD		0x1285
+#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
+
+#define PCI_VENDOR_ID_ALTEON		0x12ae
+#define PCI_DEVICE_ID_ALTEON_ACENIC	0x0001
+
+#define PCI_VENDOR_ID_USR		0x12B9
+
+#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
+
+#define PCI_VENDOR_ID_PICTUREL		0x12c5
+#define PCI_DEVICE_ID_PICTUREL_PCIVST	0x0081
+
+#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
+
+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
+
+#define PCI_VENDOR_ID_AUREAL		0x12eb
+#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
+#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
+
+#define PCI_VENDOR_ID_CBOARDS		0x1307
+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
+
+#define PCI_VENDOR_ID_SIIG		0x131f
+#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
+#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
+#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
+#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
+#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
+#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
+#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
+#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
+#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
+#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
+#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
+#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
+#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
+#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
+#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
+#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
+#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
+#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
+#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
+#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
+#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
+#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
+
+#define PCI_VENDOR_ID_DOMEX		0x134a
+#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
+
+#define PCI_VENDOR_ID_QUATECH		0x135C
+#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
+#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
+#define PCI_DEVICE_ID_QUATECH_DSC200	0x0030
+#define PCI_DEVICE_ID_QUATECH_QSC200	0x0040
+#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
+#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
+
+#define PCI_VENDOR_ID_SEALEVEL		0x135e
+#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
+#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
+#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
+
+#define PCI_VENDOR_ID_HYPERCOPE		0x1365
+#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS	0x0109
+
+#define PCI_VENDOR_ID_LMC		0x1376
+#define PCI_DEVICE_ID_LMC_HSSI		0x0003
+#define PCI_DEVICE_ID_LMC_DS3		0x0004
+#define PCI_DEVICE_ID_LMC_SSI		0x0005
+#define PCI_DEVICE_ID_LMC_T1		0x0006
+
+#define PCI_VENDOR_ID_NETGEAR		0x1385
+#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
+
+#define PCI_VENDOR_ID_APPLICOM		0x1389
+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
+
+#define PCI_VENDOR_ID_MOXA		0x1393
+#define PCI_DEVICE_ID_MOXA_C104		0x1040
+#define PCI_DEVICE_ID_MOXA_C168		0x1680
+#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
+#define PCI_DEVICE_ID_MOXA_C218		0x2180
+#define PCI_DEVICE_ID_MOXA_C320		0x3200
+
+#define PCI_VENDOR_ID_CCD		0x1397
+#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
+#define PCI_DEVICE_ID_CCD_B000		0xb000
+#define PCI_DEVICE_ID_CCD_B006		0xb006
+#define PCI_DEVICE_ID_CCD_B007		0xb007
+#define PCI_DEVICE_ID_CCD_B008		0xb008
+#define PCI_DEVICE_ID_CCD_B009		0xb009
+#define PCI_DEVICE_ID_CCD_B00A		0xb00a
+#define PCI_DEVICE_ID_CCD_B00B		0xb00b
+#define PCI_DEVICE_ID_CCD_B00C		0xb00c
+#define PCI_DEVICE_ID_CCD_B100		0xb100
+
+#define PCI_VENDOR_ID_3WARE		0x13C1
+#define PCI_DEVICE_ID_3WARE_1000	0x1000
+
+#define PCI_VENDOR_ID_ABOCOM		0x13D1
+#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
+
+#define PCI_VENDOR_ID_CMEDIA		0x13f6
+#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
+#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
+#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
+#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
+
+#define PCI_VENDOR_ID_LAVA		0x1407
+#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
+#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
+#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
+#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
+#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
+
+#define PCI_VENDOR_ID_TIMEDIA		0x1409
+#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
+
+#define PCI_VENDOR_ID_OXSEMI		0x1415
+#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
+#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x950A
+#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
+
+#define PCI_VENDOR_ID_AIRONET		0x14b9
+#define PCI_DEVICE_ID_AIRONET_4800_1	0x0001
+#define PCI_DEVICE_ID_AIRONET_4800	0x4500 /* values switched?  see */
+#define PCI_DEVICE_ID_AIRONET_4500	0x4800 /* drivers/net/aironet4500_card.c */
+
+#define PCI_VENDOR_ID_TITAN		0x14D2
+#define PCI_DEVICE_ID_TITAN_100		0xA001
+#define PCI_DEVICE_ID_TITAN_200		0xA005
+#define PCI_DEVICE_ID_TITAN_400		0xA003
+#define PCI_DEVICE_ID_TITAN_800B	0xA004
+
+#define PCI_VENDOR_ID_PANACOM		0x14d4
+#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
+#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
+
+#define PCI_VENDOR_ID_AFAVLAB		0x14db
+#define PCI_DEVICE_ID_AFAVLAB_TK9902	0x2120
+
+#define PCI_VENDOR_ID_SYBA		0x1592
+#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
+#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
+
+#define PCI_VENDOR_ID_MORETON		0x15aa
+#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
+
+#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
+
+#define PCI_VENDOR_ID_SYMPHONY		0x1c1c
+#define PCI_DEVICE_ID_SYMPHONY_101	0x0001
+
+#define PCI_VENDOR_ID_TEKRAM		0x1de1
+#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
+
+#define PCI_VENDOR_ID_3DLABS		0x3d3d
+#define PCI_DEVICE_ID_3DLABS_300SX	0x0001
+#define PCI_DEVICE_ID_3DLABS_500TX	0x0002
+#define PCI_DEVICE_ID_3DLABS_DELTA	0x0003
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA	0x0004
+#define PCI_DEVICE_ID_3DLABS_MX		0x0006
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
+#define PCI_DEVICE_ID_3DLABS_GAMMA	0x0008
+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
+
+#define PCI_VENDOR_ID_AVANCE		0x4005
+#define PCI_DEVICE_ID_AVANCE_ALG2064	0x2064
+#define PCI_DEVICE_ID_AVANCE_2302	0x2302
+
+#define PCI_VENDOR_ID_NETVIN		0x4a14
+#define PCI_DEVICE_ID_NETVIN_NV5000SC	0x5000
+
+#define PCI_VENDOR_ID_S3		0x5333
+#define PCI_DEVICE_ID_S3_PLATO_PXS	0x0551
+#define PCI_DEVICE_ID_S3_ViRGE		0x5631
+#define PCI_DEVICE_ID_S3_TRIO		0x8811
+#define PCI_DEVICE_ID_S3_AURORA64VP	0x8812
+#define PCI_DEVICE_ID_S3_TRIO64UVP	0x8814
+#define PCI_DEVICE_ID_S3_ViRGE_VX	0x883d
+#define PCI_DEVICE_ID_S3_868		0x8880
+#define PCI_DEVICE_ID_S3_928		0x88b0
+#define PCI_DEVICE_ID_S3_864_1		0x88c0
+#define PCI_DEVICE_ID_S3_864_2		0x88c1
+#define PCI_DEVICE_ID_S3_964_1		0x88d0
+#define PCI_DEVICE_ID_S3_964_2		0x88d1
+#define PCI_DEVICE_ID_S3_968		0x88f0
+#define PCI_DEVICE_ID_S3_TRIO64V2	0x8901
+#define PCI_DEVICE_ID_S3_PLATO_PXG	0x8902
+#define PCI_DEVICE_ID_S3_ViRGE_DXGX	0x8a01
+#define PCI_DEVICE_ID_S3_ViRGE_GX2	0x8a10
+#define PCI_DEVICE_ID_S3_ViRGE_MX	0x8c01
+#define PCI_DEVICE_ID_S3_ViRGE_MXP	0x8c02
+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV	0x8c03
+#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
+
+#define PCI_VENDOR_ID_DCI		0x6666
+#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
+
+#define PCI_VENDOR_ID_GENROCO		0x5555
+#define PCI_DEVICE_ID_GENROCO_HFP832	0x0003
+
+#define PCI_VENDOR_ID_INTEL		0x8086
+#define PCI_DEVICE_ID_INTEL_21145	0x0039
+#define PCI_DEVICE_ID_INTEL_21152BB	0xb152
+#define PCI_DEVICE_ID_INTEL_82375	0x0482
+#define PCI_DEVICE_ID_INTEL_82424	0x0483
+#define PCI_DEVICE_ID_INTEL_82378	0x0484
+#define PCI_DEVICE_ID_INTEL_82430	0x0486
+#define PCI_DEVICE_ID_INTEL_82434	0x04a3
+#define PCI_DEVICE_ID_INTEL_I960	0x0960
+#define PCI_DEVICE_ID_INTEL_82559	0x1030
+#define PCI_DEVICE_ID_INTEL_82559ER	0x1209
+#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
+#define PCI_DEVICE_ID_INTEL_82092AA_1	0x1222
+#define PCI_DEVICE_ID_INTEL_7116	0x1223
+#define PCI_DEVICE_ID_INTEL_82596	0x1226
+#define PCI_DEVICE_ID_INTEL_82865	0x1227
+#define PCI_DEVICE_ID_INTEL_82557	0x1229
+#define PCI_DEVICE_ID_INTEL_82437	0x122d
+#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
+#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
+#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
+#define PCI_DEVICE_ID_INTEL_82437MX	0x1235
+#define PCI_DEVICE_ID_INTEL_82441	0x1237
+#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
+#define PCI_DEVICE_ID_INTEL_82439	0x1250
+#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
+#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
+#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
+#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
+#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
+#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
+#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
+#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
+#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
+#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
+#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
+#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
+#define PCI_DEVICE_ID_INTEL_82801AA_2	0x2412
+#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
+#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
+#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
+#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
+#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
+#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
+#define PCI_DEVICE_ID_INTEL_82801AB_2	0x2422
+#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
+#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
+#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
+#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
+#define PCI_DEVICE_ID_INTEL_82820FW_0	0x2440
+#define PCI_DEVICE_ID_INTEL_82820FW_1	0x2442
+#define PCI_DEVICE_ID_INTEL_82820FW_2	0x2443
+#define PCI_DEVICE_ID_INTEL_82820FW_3	0x2444
+#define PCI_DEVICE_ID_INTEL_82820FW_4	0x2449
+#define PCI_DEVICE_ID_INTEL_82820FW_5	0x244b
+#define PCI_DEVICE_ID_INTEL_82820FW_6	0x244e
+#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
+#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
+#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
+#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
+#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
+#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
+#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
+#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
+#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
+#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
+#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
+#define PCI_DEVICE_ID_INTEL_82443MX_2	0x719a
+#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
+#define PCI_DEVICE_ID_INTEL_82372FB_0	0x7600
+#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
+#define PCI_DEVICE_ID_INTEL_82372FB_2	0x7602
+#define PCI_DEVICE_ID_INTEL_82372FB_3	0x7603
+#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
+#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
+
+#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
+#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
+#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
+#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
+
+#define PCI_VENDOR_ID_KTI		0x8e2e
+#define PCI_DEVICE_ID_KTI_ET32P2	0x3000
+
+#define PCI_VENDOR_ID_ADAPTEC		0x9004
+#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
+#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
+#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
+#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
+#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
+#define PCI_DEVICE_ID_ADAPTEC_5800	0x5800
+#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
+#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
+#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
+#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
+#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
+#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
+#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
+#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
+#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
+#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
+#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
+#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
+#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
+#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
+#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
+#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
+#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
+#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
+#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
+#define PCI_DEVICE_ID_ADAPTEC_1030	0x8b78
+
+#define PCI_VENDOR_ID_ADAPTEC2		0x9005
+#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
+#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
+#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
+#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
+#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
+#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
+#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
+#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
+#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
+#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
+#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
+#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
+#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
+#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
+
+#define PCI_VENDOR_ID_ATRONICS		0x907f
+#define PCI_DEVICE_ID_ATRONICS_2015	0x2015
+
+#define PCI_VENDOR_ID_HOLTEK		0x9412
+#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
+
+#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
+#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
+
+#define PCI_VENDOR_ID_TIGERJET		0xe159
+#define PCI_DEVICE_ID_TIGERJET_300	0x0001
+#define PCI_DEVICE_ID_TIGERJET_100	0x0002
+
+#define PCI_VENDOR_ID_ARK		0xedd8
+#define PCI_DEVICE_ID_ARK_STING		0xa091
+#define PCI_DEVICE_ID_ARK_STINGARK	0xa099
+#define PCI_DEVICE_ID_ARK_2000MT	0xa0a1
+
+#define PCI_VENDOR_ID_MICROGATE		0x13c0
+#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
+#define PCI_DEVICE_ID_MICROGATE_SCC	0x0020
+#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
+
+#define PCI_VENDOR_ID_SIS               0x1039
+#define PCI_DEVICE_ID_SIS_300           0x0300
+#define PCI_DEVICE_ID_SIS_540           0x5300
+#define PCI_DEVICE_ID_SIS_630           0x6300
+
+#define PCI_VENDOR_ID_SMI               0x126f
+#define PCI_DEVICE_ID_SMI_710           0x0710
+#define PCI_DEVICE_ID_SMI_712           0x0712
+#define PCI_DEVICE_ID_SMI_810           0x0810
diff --git a/include/video_ad7177.h b/include/video_ad7177.h
new file mode 100644
index 00000000000..68a6b8df648
--- /dev/null
+++ b/include/video_ad7177.h
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _VIDEO_AD7177_H_
+#define _VIDEO_AD7177_H_
+
+/*#define VIDEO_DEBUG_DISABLE_COLORS	0 */
+
+#define VIDEO_ENCODER_NAME	"Analog Devices AD7177"
+
+#define VIDEO_ENCODER_I2C_RATE	100000	/* Max rate is 100Khz */
+#define VIDEO_ENCODER_CB_Y_CR_Y		/* Use CB Y CR Y format... */
+
+#define VIDEO_MODE_YUYV		/* The only mode supported by this encoder */
+#undef  VIDEO_MODE_RGB
+#define VIDEO_MODE_BPP		16
+
+#ifdef  VIDEO_MODE_PAL
+#define VIDEO_ACTIVE_COLS	720
+#define VIDEO_ACTIVE_ROWS	576
+#define VIDEO_VISIBLE_COLS	640
+#define VIDEO_VISIBLE_ROWS	480
+#endif
+
+#ifdef 	VIDEO_MODE_NTSC
+#define VIDEO_ACTIVE_COLS	720
+#define VIDEO_ACTIVE_ROWS	525
+#define VIDEO_VISIBLE_COLS	640
+#define VIDEO_VISIBLE_ROWS	400
+#endif
+
+static unsigned char
+    video_encoder_data[] = {
+#ifdef VIDEO_MODE_NTSC
+    				        0x04, /* Mode Register 0 */
+#ifdef VIDEO_DEBUG_COLORBARS
+					0xc2,
+#else
+	                                0x42, /* Mode Register 1 */
+#endif
+                                        0x16, /* Subcarrier Freq 0 */
+                                        0x7c, /* Subcarrier Freq 1 */
+                            		0xf0, /* Subcarrier Freq 2 */
+                                        0x21, /* Subcarrier Freq 3 */
+                                        0x00, /* Subcarrier phase */
+                                        0x02, /* Timing Register 0 */
+                                	0x00, /* Extended Captioning 0 */
+                                        0x00, /* Extended Captioning 1 */
+                                        0x00, /* Closed Captioning 0 */
+                                	0x00, /* Closed Captioning 1 */
+                                        0x00, /* Timing Register 1 */
+                                        0x08, /* Mode Register 2 */
+                                	0x00, /* Pedestal Register 0 */
+                                        0x00, /* Pedestal Register 1 */
+                                        0x00, /* Pedestal Register 2 */
+                                        0x00, /* Pedestal Register 3 */
+                                        0x08 /* Mode Register 3 */
+
+#endif
+#ifdef VIDEO_MODE_PAL
+#ifdef VIDEO_MODE_RGB_OUT
+
+    				        0x69, /* Mode Register 0 */
+#ifdef VIDEO_DEBUG_COLORBARS
+					0xc0, /* Mode Register 1 (c0) */
+#else
+					0x40, /* Mode Register 1 (c0) */
+#endif
+                                        0xcb, /* Subcarrier Freq 0 */
+                                        0x8a, /* Subcarrier Freq 1 */
+                            		0x09, /* Subcarrier Freq 2 */
+                                        0x2a, /* Subcarrier Freq 3 */
+                                        0x00, /* Subcarrier phase */
+                                        0x02, /* Timing Register 0 */
+                                	0x00, /* Extended Captioning 0 */
+                                        0x00, /* Extended Captioning 1 */
+                                        0x00, /* Closed Captioning 0 */
+                                	0x00, /* Closed Captioning 1 */
+                                        0x00, /* Timing Register 1 */
+                                        0x28, /* Mode Register 2 */
+                                	0x00, /* Pedestal Register 0 */
+                                        0x00, /* Pedestal Register 1 */
+                                        0x00, /* Pedestal Register 2 */
+                                        0x00, /* Pedestal Register 3 */
+                                        0x08  /* Mode Register 3 */
+
+#else
+
+    				        0x09, /* Mode Register 0 (was 01) */
+#ifdef VIDEO_DEBUG_COLORBARS
+					0xd8,	/* */
+#else
+	                                0x59, /* Mode Register 1 (was 58) */
+#endif
+                                        0xcb, /* Subcarrier Freq 0 */
+                                        0x8a, /* Subcarrier Freq 1 */
+                                        0x09, /* Subcarrier Freq 2 */
+                                        0x2a, /* Subcarrier Freq 3 */
+                                        0x00, /* Subcarrier phase */
+                                        0x02, /* Timing Register 0 (was a) */
+                                        0x00, /* Extended Captioning 0 */
+                                        0x00, /* Extended Captioning 1 */
+                                        0x00, /* Closed Captioning 0 */
+                                        0x00, /* Closed Captioning 1 */
+                                        0x00, /* Timing Register 1 */
+#ifdef VIDEO_DEBUG_LOWPOWER
+#ifdef VIDEO_DEBUG_DISABLE_COLORS
+                                        0x98, /* Mode Register 2 */
+#else
+                                        0x88, /* Mode Register 2 */
+#endif
+#else
+#ifdef VIDEO_DEBUG_DISABLE_COLORS
+                                        0x18, /* Mode Register 2 */
+#else
+                                        0x08, /* Mode Register 2 */
+#endif
+#endif
+                                        0x00, /* Pedestal Register 0 */
+                                        0x00, /* Pedestal Register 1 */
+                                        0x00, /* Pedestal Register 2 */
+                                        0x00, /* Pedestal Register 3 */
+                                        0x08  /* Mode Register 3 */
+#endif
+#endif
+    } ;
+
+#endif
diff --git a/include/video_logo.h b/include/video_logo.h
new file mode 100644
index 00000000000..c12e8f84edf
--- /dev/null
+++ b/include/video_logo.h
@@ -0,0 +1,1951 @@
+/* */
+/* Generated by EasyLogo, (C) 2000 by Paolo Scaffardi */
+/* */
+/* To use this, include it and call: easylogo_plot(screen,&u_boot_logo, width,x,y) */
+/* */
+/* Where:	'screen'	is the pointer to the frame buffer */
+/* 		'width'	is the screen width */
+/* 		'x'		is the horizontal position */
+/* 		'y'		is the vertical position */
+/* */
+
+#include <video_easylogo.h>
+
+#define	DEF_U_BOOT_LOGO_WIDTH		160
+#define	DEF_U_BOOT_LOGO_HEIGHT		96
+#define	DEF_U_BOOT_LOGO_PIXELS		15360
+#define	DEF_U_BOOT_LOGO_BPP		16
+#define	DEF_U_BOOT_LOGO_PIXEL_SIZE	2
+#define	DEF_U_BOOT_LOGO_SIZE		30720
+
+unsigned char DEF_U_BOOT_LOGO_DATA[DEF_U_BOOT_LOGO_SIZE] = {
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6,
+ 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7c, 0x4b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7c, 0x69, 0x80, 0xd5, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xb6, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7c, 0x69, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa1, 0xa5, 0x70, 0xcc, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x6d, 0xc7, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x69,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0x96, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0x96, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x55, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xa0,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0x96, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x84, 0xdb, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x91, 0xc3, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xc0, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0x96,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7e, 0x96, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7d, 0x80, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xa0, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x75, 0xd1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0xdb, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x91, 0xc3, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0xa7, 0x9a, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x51, 0xa5, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x51, 0xa5, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x69, 0x7f, 0x8b, 0x7d, 0x75, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xb6, 0x80, 0xe1, 0x7e, 0xaa, 0x7c, 0x69, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xb6,
+ 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xb6, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0xdb, 0x8f, 0xc7,
+ 0x54, 0xa9, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x54, 0xa9, 0x8c, 0xcc,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7c, 0x69, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7d, 0x75, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xa0, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x89, 0xd1, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x59, 0xae, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x69, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xaa, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xc0, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7d, 0x80, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xd5, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xaa, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x89, 0xd1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x69, 0xc3, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x8f, 0xc7, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xd5, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x4b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x4c, 0x9f, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7c, 0x55, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xca, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x8c, 0xcc, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x9e, 0xa9, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa7, 0x9a, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa1, 0xa5, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0x96, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x9e, 0xa9, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x9e, 0xa9, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x8c, 0xcc, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xd5, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x4c, 0x9f, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x7c, 0xdb, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xca, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7e, 0x96, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xca, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0xa1, 0xa5, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa7, 0x9a, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7d, 0x80, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7c, 0xdb, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xca, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xd5, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7d, 0x80, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x7c, 0xdb, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x4c, 0x9f, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0x9d, 0xae, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xca, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0x96,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7d, 0x75, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xa0,
+ 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7d, 0x80, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0xdb, 0x97, 0xb8,
+ 0x51, 0xa5, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x51, 0xa5, 0x94, 0xbd,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7b, 0x60, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x7c, 0xdb, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7c, 0xdb, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x8c, 0xcc, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0xa7, 0x9a, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7b, 0x60, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x78, 0xd6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0xdb, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x4b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xc0,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7c, 0x4b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xd5,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0x8c, 0xcc, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x89, 0xd1, 0x45, 0x95, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7b, 0x60, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xb6,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xca, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x55, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa7, 0x9a,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xaa, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x75, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0xa9, 0x95,
+ 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0x84, 0xdb, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x8f, 0xc7, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95, 0x45, 0x95, 0xa9, 0x95,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7c, 0x69, 0x7a, 0x3f, 0x7c, 0x4b, 0x7c, 0x69,
+ 0x7e, 0xaa, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7f, 0x8b, 0x7f, 0x8b, 0x7e, 0xaa, 0x80, 0xb6, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x75, 0xd1, 0x97, 0xb8,
+ 0x70, 0xcc, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x70, 0xcc, 0x97, 0xb8,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xb6, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7d, 0x80, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f,
+ 0x80, 0xd5, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x69, 0x7c, 0x69, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x69, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x55, 0x7a, 0x3f, 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7b, 0x60, 0x7c, 0x69, 0x7b, 0x60, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7e, 0x96, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x7c, 0x69, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f,
+ 0x7d, 0x80, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x7c, 0x4b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7e, 0xa0, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xca, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x55,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7d, 0x75,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x75, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xca, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x80, 0xb6,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x80, 0xb6, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xb6,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x80, 0xd5, 0x7c, 0x55, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0x96, 0x7a, 0x3f, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f,
+ 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xb6,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x75, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7c, 0x69, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xb6,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x69,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7b, 0x60, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0x96, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xb6,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xa0,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7b, 0x60, 0x7a, 0x3f, 0x7e, 0xaa, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xa0, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7d, 0x80, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7d, 0x75, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x7f, 0x8b,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xd5, 0x7a, 0x3f, 0x7c, 0x55, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7c, 0x55,
+ 0x7c, 0x4b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xc0, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xaa, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x7d, 0x80, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7e, 0xaa, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xca, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xaa, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7b, 0x60,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7b, 0x60, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7c, 0x69,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x7e, 0x96,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xca, 0x7a, 0x3f, 0x7d, 0x75, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x69, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xaa, 0x7a, 0x3f,
+ 0x7c, 0x69, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xb6, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xc0, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x7c, 0x69, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7e, 0xaa, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xc0, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7b, 0x60, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x7b, 0x60, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7d, 0x80, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7f, 0x8b, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7b, 0x60, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xd5, 0x7a, 0x3f, 0x7d, 0x80, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7e, 0xaa, 0x7a, 0x3f, 0x7e, 0xa0, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7c, 0x4b, 0x7a, 0x3f, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7c, 0x4b, 0x7c, 0x69,
+ 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x7f, 0x8b, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1,
+ 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x80, 0xe1, 0x7d, 0x80, 0x7a, 0x3f, 0x7a, 0x3f,
+ 0x7a, 0x3f, 0x7c, 0x69, 0x7b, 0x60, 0x7a, 0x3f, 0x7a, 0x3f, 0x7a, 0x3f, 0x80, 0xe1, 0x80, 0xe1
+};
+
+fastimage_t u_boot_logo = {
+		DEF_U_BOOT_LOGO_DATA,
+		DEF_U_BOOT_LOGO_WIDTH,
+		DEF_U_BOOT_LOGO_HEIGHT,
+		DEF_U_BOOT_LOGO_BPP,
+		DEF_U_BOOT_LOGO_PIXEL_SIZE,
+		DEF_U_BOOT_LOGO_SIZE
+};
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
new file mode 100644
index 00000000000..347b6637d32
--- /dev/null
+++ b/lib_ppc/board.c
@@ -0,0 +1,962 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <malloc.h>
+#include <devices.h>
+#include <syscall.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#include <ide.h>
+#endif
+#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#include <scsi.h>
+#endif
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#include <kgdb.h>
+#endif
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+#include <net.h>
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#include <cmd_bedbug.h>
+#endif
+#ifdef CFG_ALLOC_DPRAM
+#include <commproc.h>
+#endif
+#include <version.h>
+#if defined(CONFIG_BAB7xx)
+#include <w83c553f.h>
+#endif
+#include <dtt.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+void doc_init (void);
+#endif
+#if defined(CONFIG_HARD_I2C) || \
+    defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+
+static char *failed = "*** failed ***\n";
+
+#if defined(CONFIG_PCU_E) || defined(CONFIG_OXC)
+extern flash_info_t flash_info[];
+#endif
+
+#include <environment.h>
+
+#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
+      (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
+    defined(CFG_ENV_IS_IN_NVRAM)
+#define	TOTAL_MALLOC_LEN	(CFG_MALLOC_LEN + CFG_ENV_SIZE)
+#else
+#define	TOTAL_MALLOC_LEN	CFG_MALLOC_LEN
+#endif
+
+/*
+ * Begin and End of memory area for malloc(), and current "brk"
+ */
+static	ulong	mem_malloc_start = 0;
+static	ulong	mem_malloc_end	 = 0;
+static	ulong	mem_malloc_brk	 = 0;
+
+/************************************************************************
+ * Utilities								*
+ ************************************************************************
+ */
+
+/*
+ * The Malloc area is immediately below the monitor copy in DRAM
+ */
+static void mem_malloc_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
+
+	mem_malloc_end = dest_addr;
+	mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+	mem_malloc_brk = mem_malloc_start;
+
+	memset ((void *) mem_malloc_start,
+		0,
+		mem_malloc_end - mem_malloc_start);
+}
+
+void *sbrk (ptrdiff_t increment)
+{
+	ulong old = mem_malloc_brk;
+	ulong new = old + increment;
+
+	if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
+		return (NULL);
+	}
+	mem_malloc_brk = new;
+	return ((void *) old);
+}
+
+char *strmhz (char *buf, long hz)
+{
+	long l, n;
+	long m;
+
+	n = hz / 1000000L;
+	l = sprintf (buf, "%ld", n);
+	m = (hz % 1000000L) / 1000L;
+	if (m != 0)
+		sprintf (buf + l, ".%03ld", m);
+	return (buf);
+}
+
+static void syscalls_init (void)
+{
+	ulong *addr;
+
+	syscall_tbl[SYSCALL_MALLOC] = (void *) malloc;
+	syscall_tbl[SYSCALL_FREE] = (void *) free;
+
+	syscall_tbl[SYSCALL_INSTALL_HDLR] = (void *) irq_install_handler;
+	syscall_tbl[SYSCALL_FREE_HDLR] = (void *) irq_free_handler;
+
+	addr = (ulong *) 0xc00;		/* syscall ISR addr */
+
+	/* patch ISR code */
+	*addr++ |= (ulong) syscall_tbl >> 16;
+	*addr++ |= (ulong) syscall_tbl & 0xFFFF;
+	*addr++ |= NR_SYSCALLS >> 16;
+	*addr++ |= NR_SYSCALLS & 0xFFFF;
+
+	flush_cache (0x0C00, 0x10);
+}
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+/************************************************************************
+ * Init Utilities							*
+ ************************************************************************
+ * Some of this code should be moved into the core functions,
+ * but let's get it working (again) first...
+ */
+
+static int init_baudrate (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	uchar tmp[64];	/* long enough for environment variables */
+	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
+
+	gd->baudrate = (i > 0)
+			? (int) simple_strtoul (tmp, NULL, 10)
+			: CONFIG_BAUDRATE;
+
+	return (0);
+}
+
+/***********************************************************************/
+
+static int init_func_ram (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef	CONFIG_BOARD_TYPES
+	int board_type = gd->board_type;
+#else
+	int board_type = 0;	/* use dummy arg */
+#endif
+	puts ("DRAM:  ");
+
+	if ((gd->ram_size = initdram (board_type)) > 0) {
+		print_size (gd->ram_size, "\n");
+		return (0);
+	}
+	puts (failed);
+	return (1);
+}
+
+/***********************************************************************/
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+static int init_func_i2c (void)
+{
+	puts ("I2C:   ");
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	puts ("ready\n");
+	return (0);
+}
+#endif
+
+/***********************************************************************/
+
+#if defined(CONFIG_WATCHDOG)
+static int init_func_watchdog_init (void)
+{
+	puts ("       Watchdog enabled\n");
+	WATCHDOG_RESET ();
+	return (0);
+}
+# define INIT_FUNC_WATCHDOG_INIT	init_func_watchdog_init,
+
+static int init_func_watchdog_reset (void)
+{
+	WATCHDOG_RESET ();
+	return (0);
+}
+# define INIT_FUNC_WATCHDOG_RESET	init_func_watchdog_reset,
+#else
+# define INIT_FUNC_WATCHDOG_INIT	/* undef */
+# define INIT_FUNC_WATCHDOG_RESET	/* undef */
+#endif /* CONFIG_WATCHDOG */
+
+/************************************************************************
+ * Initialization sequence						*
+ ************************************************************************
+ */
+
+init_fnc_t *init_sequence[] = {
+
+#if defined(CONFIG_BOARD_PRE_INIT)
+	board_pre_init,		/* very early board init code (fpga boot, etc.) */
+#endif
+
+	get_clocks,		/* get CPU and bus clocks (etc.) */
+	init_timebase,
+#ifdef CFG_ALLOC_DPRAM
+	dpram_init,
+#endif
+#if defined(CONFIG_BOARD_POSTCLK_INIT)
+	board_postclk_init,
+#endif
+	env_init,
+	init_baudrate,
+	serial_init,
+	console_init_f,
+	display_options,
+#if defined(CONFIG_8260)
+	prt_8260_rsr,
+	prt_8260_clks,
+#endif /* CONFIG_8260 */
+	checkcpu,
+	checkboard,
+	INIT_FUNC_WATCHDOG_INIT
+#if defined(CONFIG_BMW)		|| \
+    defined(CONFIG_COGENT)	|| \
+    defined(CONFIG_HYMOD)	|| \
+    defined(CONFIG_RSD_PROTO)	|| \
+    defined(CONFIG_W7O)
+	misc_init_f,
+#endif
+	INIT_FUNC_WATCHDOG_RESET
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+	init_func_i2c,
+#endif
+#if defined(CONFIG_DTT)		/* Digital Thermometers and Thermostats */
+	dtt_init,
+#endif
+	INIT_FUNC_WATCHDOG_RESET
+	init_func_ram,
+#if defined(CFG_DRAM_TEST)
+	testdram,
+#endif /* CFG_DRAM_TEST */
+	INIT_FUNC_WATCHDOG_RESET
+
+	NULL,			/* Terminate this list */
+};
+
+/************************************************************************
+ *
+ * This is the first part of the initialization sequence that is
+ * implemented in C, but still running from ROM.
+ *
+ * The main purpose is to provide a (serial) console interface as
+ * soon as possible (so we can see any error messages), and to
+ * initialize the RAM so that we can relocate the monitor code to
+ * RAM.
+ *
+ * Be aware of the restrictions: global data is read-only, BSS is not
+ * initialized, and stack space is limited to a few kB.
+ *
+ ************************************************************************
+ */
+
+void board_init_f (ulong bootflag)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	bd_t *bd;
+	ulong len, addr, addr_sp;
+	gd_t *id;
+	init_fnc_t **init_fnc_ptr;
+#ifdef CONFIG_PRAM
+	int i;
+	ulong reg;
+	uchar tmp[64];		/* long enough for environment variables */
+#endif
+
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+#ifndef CONFIG_8260
+	/* Clear initial global data */
+	memset ((void *) gd, 0, sizeof (gd_t));
+#endif
+
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		if ((*init_fnc_ptr) () != 0) {
+			hang ();
+		}
+	}
+
+	/*
+	 * Now that we have DRAM mapped and working, we can
+	 * relocate the code and continue running from DRAM.
+	 *
+	 * Reserve memory at end of RAM for (top down in that order):
+	 *  - protected RAM
+	 *  - LCD framebuffer
+	 *  - monitor code
+	 *  - board info struct
+	 */
+	len = get_endaddr () - CFG_MONITOR_BASE;
+
+	if (len > CFG_MONITOR_LEN) {
+		printf ("*** U-Boot size %ld > reserved memory (%d)\n",
+				len, CFG_MONITOR_LEN);
+		hang ();
+	}
+
+	if (CFG_MONITOR_LEN > len)
+		len = CFG_MONITOR_LEN;
+
+#ifndef	CONFIG_VERY_BIG_RAM
+	addr = CFG_SDRAM_BASE + gd->ram_size;
+#else
+	/* only allow stack below 256M */
+	addr = CFG_SDRAM_BASE +
+	       (gd->ram_size > 256 << 20) ? 256 << 20 : gd->ram_size;
+#endif
+
+#ifdef CONFIG_PRAM
+	/*
+	 * reserve protected RAM
+	 */
+	i = getenv_r ("pram", tmp, sizeof (tmp));
+	reg = (i > 0) ? simple_strtoul (tmp, NULL, 10) : CONFIG_PRAM;
+	addr -= (reg << 10);		/* size is in kB */
+# ifdef DEBUG
+	printf ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+# endif
+#endif /* CONFIG_PRAM */
+
+	/* round down to next 4 kB limit */
+	addr &= ~(4096 - 1);
+#ifdef DEBUG
+	printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+#endif
+
+#ifdef CONFIG_LCD
+	/* reserve memory for LCD display (always full pages) */
+	addr = lcd_setmem (addr);
+	gd->fb_base = addr;
+#endif /* CONFIG_LCD */
+
+#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
+	/* reserve memory for video display (always full pages) */
+	addr = video_setmem (addr);
+	gd->fb_base = addr;
+#endif /* CONFIG_VIDEO  */
+
+	/*
+	 * reserve memory for U-Boot code, data & bss
+	 * round down to next 4 kB limit
+	 */
+	addr -= len;
+	addr &= ~(4096 - 1);
+
+#ifdef DEBUG
+	printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+#endif
+
+	/*
+	 * reserve memory for malloc() arena
+	 */
+	addr_sp = addr - TOTAL_MALLOC_LEN;
+#ifdef DEBUG
+	printf ("Reserving %dk for malloc() at: %08lx\n",
+			TOTAL_MALLOC_LEN >> 10, addr_sp);
+#endif
+
+	/*
+	 * (permanently) allocate a Board Info struct
+	 * and a permanent copy of the "global" data
+	 */
+	addr_sp -= sizeof (bd_t);
+	bd = (bd_t *) addr_sp;
+	gd->bd = bd;
+#ifdef DEBUG
+	printf ("Reserving %d Bytes for Board Info at: %08lx\n",
+			sizeof (bd_t), addr_sp);
+#endif
+	addr_sp -= sizeof (gd_t);
+	id = (gd_t *) addr_sp;
+#ifdef DEBUG
+	printf ("Reserving %d Bytes for Global Data at: %08lx\n",
+			sizeof (gd_t), addr_sp);
+#endif
+
+	/*
+	 * Finally, we set up a new (bigger) stack.
+	 *
+	 * Leave some safety gap for SP, force alignment on 16 byte boundary
+	 * Clear initial stack frame
+	 */
+	addr_sp -= 16;
+	addr_sp &= ~0xF;
+	*((ulong *) addr_sp)-- = 0;
+	*((ulong *) addr_sp)-- = 0;
+#ifdef DEBUG
+	printf ("Stack Pointer at: %08lx\n", addr_sp);
+#endif
+
+	/*
+	 * Save local variables to board info struct
+	 */
+
+	bd->bi_memstart  = CFG_SDRAM_BASE;	/* start of  DRAM memory      */
+	bd->bi_memsize   = gd->ram_size;	/* size  of  DRAM memory in bytes */
+
+#ifdef CONFIG_IP860
+	bd->bi_sramstart = SRAM_BASE;	/* start of  SRAM memory      */
+	bd->bi_sramsize  = SRAM_SIZE;	/* size  of  SRAM memory      */
+#else
+	bd->bi_sramstart = 0;		/* FIXME */ /* start of  SRAM memory      */
+	bd->bi_sramsize  = 0;		/* FIXME */ /* size  of  SRAM memory      */
+#endif
+
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
+	bd->bi_immr_base = CFG_IMMR;	/* base  of IMMR register     */
+#endif
+
+	bd->bi_bootflags = bootflag;	/* boot / reboot flag (for LynxOS)    */
+
+	WATCHDOG_RESET ();
+	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
+	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
+#if defined(CONFIG_8260)
+	bd->bi_cpmfreq = gd->cpm_clk;
+	bd->bi_brgfreq = gd->brg_clk;
+	bd->bi_sccfreq = gd->scc_clk;
+	bd->bi_vco     = gd->vco_out;
+#endif /* CONFIG_8260 */
+
+	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
+
+#ifdef CFG_EXTBDINFO
+	strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
+	strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
+
+	bd->bi_procfreq = gd->cpu_clk;	/* Processor Speed, In Hz */
+	bd->bi_plb_busfreq = gd->bus_clk;
+#ifdef CONFIG_405GP
+	bd->bi_pci_busfreq = get_PCI_freq ();
+#endif
+#endif
+
+#ifdef DEBUG
+	printf ("New Stack Pointer is: %08lx\n", addr_sp);
+#endif
+
+	WATCHDOG_RESET ();
+
+#ifdef CONFIG_POST
+	post_bootmode_init();
+	post_run (NULL, POST_ROM | post_bootmode_get(0));
+#endif
+
+	WATCHDOG_RESET();
+
+	memcpy (id, gd, sizeof (gd_t));
+
+	relocate_code (addr_sp, id, addr);
+
+	/* NOTREACHED - relocate_code() does not return */
+}
+
+
+/************************************************************************
+ *
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ *
+ ************************************************************************
+ */
+
+void board_init_r (gd_t *id, ulong dest_addr)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	cmd_tbl_t *cmdtp;
+	char *s, *e;
+	bd_t *bd;
+	int i;
+	extern void malloc_bin_reloc (void);
+#ifndef CFG_ENV_IS_NOWHERE
+	extern char * env_name_spec;
+#endif
+
+#ifndef CFG_NO_FLASH
+	ulong flash_size;
+#endif
+
+	gd = id;		/* initialize RAM version of global data */
+	bd = gd->bd;
+
+	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+
+#ifdef DEBUG
+	printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+#endif
+
+	WATCHDOG_RESET ();
+
+	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+	/*
+	 * We have to relocate the command table manually
+	 */
+	for (cmdtp = &cmd_tbl[0]; cmdtp->name; cmdtp++) {
+		ulong addr;
+
+		addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
+#if 0
+		printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
+				cmdtp->name, (ulong) (cmdtp->cmd), addr);
+#endif
+		cmdtp->cmd =
+			(int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
+
+		addr = (ulong)(cmdtp->name) + gd->reloc_off;
+		cmdtp->name = (char *)addr;
+
+		if (cmdtp->usage) {
+			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
+			cmdtp->usage = (char *)addr;
+		}
+#ifdef	CFG_LONGHELP
+		if (cmdtp->help) {
+			addr = (ulong)(cmdtp->help) + gd->reloc_off;
+			cmdtp->help = (char *)addr;
+		}
+#endif
+	}
+	/* there are some other pointer constants we must deal with */
+#ifndef CFG_ENV_IS_NOWHERE
+	env_name_spec += gd->reloc_off;
+#endif
+
+	WATCHDOG_RESET ();
+
+#ifdef CONFIG_POST
+	post_reloc ();
+#endif
+
+	WATCHDOG_RESET();
+
+#if defined(CONFIG_IP860) || defined(CONFIG_PCU_E) || defined (CONFIG_FLAGADM)
+	icache_enable ();	/* it's time to enable the instruction cache */
+#endif
+
+#if defined(CONFIG_BAB7xx)
+	/*
+	 * Do pci configuration on BAB 7xx _before_ the flash
+	 * is initialised, because we need the ISA bridge there.
+	 */
+	pci_init ();
+	/*
+	 * Initialise the ISA bridge
+	 */
+	initialise_w83c553f ();
+#endif
+
+	asm ("sync ; isync");
+
+	/*
+	 * Setup trap handlers
+	 */
+	trap_init (dest_addr);
+
+#if !defined(CFG_NO_FLASH)
+	puts ("FLASH: ");
+
+	if ((flash_size = flash_init ()) > 0) {
+#ifdef CFG_FLASH_CHECKSUM
+		print_size (flash_size, "");
+		/*
+		 * Compute and print flash CRC if flashchecksum is set to 'y'
+		 *
+		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+		 */
+		s = getenv ("flashchecksum");
+		if (s && (*s == 'y')) {
+			printf ("  CRC: %08lX",
+					crc32 (0,
+						   (const unsigned char *) CFG_FLASH_BASE,
+						   flash_size)
+					);
+		}
+		putc ('\n');
+#else
+		print_size (flash_size, "\n");
+#endif /* CFG_FLASH_CHECKSUM */
+	} else {
+		puts (failed);
+		hang ();
+	}
+
+	bd->bi_flashstart = CFG_FLASH_BASE;	/* update start of FLASH memory    */
+	bd->bi_flashsize = flash_size;	/* size of FLASH memory (final value) */
+#if defined(CONFIG_PCU_E) || defined(CONFIG_OXC)
+	bd->bi_flashoffset = 0;
+#elif CFG_MONITOR_BASE == CFG_FLASH_BASE
+	bd->bi_flashoffset = CFG_MONITOR_LEN;	/* reserved area for startup monitor  */
+#else
+	bd->bi_flashoffset = 0;
+#endif
+#else
+
+	bd->bi_flashsize = 0;
+	bd->bi_flashstart = 0;
+	bd->bi_flashoffset = 0;
+#endif /* !CFG_NO_FLASH */
+
+	WATCHDOG_RESET ();
+
+	/* initialize higher level parts of CPU like time base and timers */
+	cpu_init_r ();
+
+	WATCHDOG_RESET ();
+
+	/* initialize malloc() area */
+	mem_malloc_init ();
+	malloc_bin_reloc ();
+
+#ifdef CONFIG_SPI
+# if !defined(CFG_ENV_IS_IN_EEPROM)
+	spi_init_f ();
+# endif
+	spi_init_r ();
+#endif
+
+	/* relocate environment function pointers etc. */
+	env_relocate ();
+
+	/*
+	 * Fill in missing fields of bd_info.
+         * We do this here, where we have "normal" access to the
+         * environment; we used to do this still running from ROM,
+         * where had to use getenv_r(), which can be pretty slow when
+         * the environment is in EEPROM.
+	 */
+	s = getenv ("ethaddr");
+#if defined (CONFIG_MBX) || defined (CONFIG_RPXCLASSIC) || defined(CONFIG_IAD210)
+	if (s == NULL)
+		board_get_enetaddr (bd->bi_enetaddr);
+	else
+#endif
+		for (i = 0; i < 6; ++i) {
+			bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+			if (s)
+				s = (*e) ? e + 1 : e;
+		}
+#ifdef	CONFIG_HERMES
+	if ((gd->board_type >> 16) == 2)
+		bd->bi_ethspeed = gd->board_type & 0xFFFF;
+	else
+		bd->bi_ethspeed = 0xFFFF;
+#endif
+
+#ifdef CONFIG_NX823
+	load_sernum_ethaddr ();
+#endif
+
+#if defined(CFG_GT_6426x) || defined(CONFIG_PN62)
+	/* handle the 2nd ethernet address */
+
+	s = getenv ("eth1addr");
+
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enet1addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+#endif
+#if defined(CFG_GT_6426x)
+	/* handle the 3rd ethernet address */
+
+	s = getenv ("eth2addr");
+
+	for (i = 0; i < 6; ++i) {
+		bd->bi_enet2addr[i] = s ? simple_strtoul (s, &e, 16) : 0;
+		if (s)
+			s = (*e) ? e + 1 : e;
+	}
+#endif
+
+
+#if defined(CONFIG_TQM8xxL) || defined(CONFIG_TQM8260) || \
+    defined(CONFIG_CCM)
+	load_sernum_ethaddr ();
+#endif
+	/* IP Address */
+	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
+
+	WATCHDOG_RESET ();
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx)
+	/*
+	 * Do pci configuration
+	 */
+	pci_init ();
+#endif
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+	/* Initialize devices */
+	devices_init ();
+
+	/* allocate syscalls table (console_init_r will fill it in */
+	syscall_tbl = (void **) malloc (NR_SYSCALLS * sizeof (void *));
+
+	/* Initialize the console (after the relocation and devices init) */
+	console_init_r ();
+/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
+	syscalls_init ();
+
+#if defined(CONFIG_CCM)		|| \
+    defined(CONFIG_COGENT)	|| \
+    defined(CONFIG_CPCI405)	|| \
+    defined(CONFIG_EVB64260)	|| \
+    defined(CONFIG_HYMOD)	|| \
+    defined(CONFIG_LWMON)	|| \
+    defined(CONFIG_PCU_E)	|| \
+    defined(CONFIG_W7O)		|| \
+    defined(CONFIG_MISC_INIT_R)
+	/* miscellaneous platform dependent initialisations */
+	misc_init_r ();
+#endif
+
+#ifdef	CONFIG_HERMES
+	if (bd->bi_ethspeed != 0xFFFF)
+		hermes_start_lxt980 ((int) bd->bi_ethspeed);
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
+    defined(CONFIG_CCM)		|| \
+    defined(CONFIG_EP8260)	|| \
+    defined(CONFIG_IP860)	|| \
+    defined(CONFIG_IVML24)	|| \
+    defined(CONFIG_IVMS8)	|| \
+    defined(CONFIG_LWMON)	|| \
+    defined(CONFIG_MPC8260ADS)	|| \
+    defined(CONFIG_PCU_E)	|| \
+    defined(CONFIG_RPXSUPER)	|| \
+    defined(CONFIG_SPD823TS)	)
+
+	WATCHDOG_RESET ();
+# ifdef DEBUG
+	puts ("Reset Ethernet PHY\n");
+# endif
+	reset_phy ();
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	WATCHDOG_RESET ();
+	puts ("KGDB:  ");
+	kgdb_init ();
+#endif
+
+#ifdef DEBUG
+	printf ("U-Boot relocated to %08lx\n", dest_addr);
+#endif
+
+	/*
+	 * Enable Interrupts
+	 */
+	interrupt_init ();
+
+	/* Must happen after interrupts are initialized since
+	 * an irq handler gets installed
+	 */
+#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
+	serial_buffered_init();
+#endif
+
+#ifdef CONFIG_STATUS_LED
+	status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+
+	udelay (20);
+
+	set_timer (0);
+
+	/* Insert function pointers now that we have relocated the code */
+
+	/* Initialize from environment */
+	if ((s = getenv ("loadaddr")) != NULL) {
+		load_addr = simple_strtoul (s, NULL, 16);
+	}
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+	if ((s = getenv ("bootfile")) != NULL) {
+		copy_filename (BootFile, s, sizeof (BootFile));
+	}
+#endif /* CFG_CMD_NET */
+
+	WATCHDOG_RESET ();
+
+#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+	WATCHDOG_RESET ();
+	puts ("SCSI:  ");
+	scsi_init ();
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+	WATCHDOG_RESET ();
+	puts ("DOC:   ");
+	doc_init ();
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+	WATCHDOG_RESET ();
+	puts ("Net:   ");
+	eth_initialize (bd);
+#endif
+
+#ifdef CONFIG_POST
+	post_run (NULL, POST_RAM | post_bootmode_get(0));
+	if (post_bootmode_get(0) & POST_POWERFAIL) {
+		post_bootmode_clear();
+		board_poweroff();
+	}
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) && !(CONFIG_COMMANDS & CFG_CMD_IDE)
+	WATCHDOG_RESET ();
+	puts ("PCMCIA:");
+	pcmcia_init ();
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+	WATCHDOG_RESET ();
+# ifdef	CONFIG_IDE_8xx_PCCARD
+	puts ("PCMCIA:");
+# else
+	puts ("IDE:   ");
+#endif
+	ide_init ();
+#endif /* CFG_CMD_IDE */
+
+#ifdef CONFIG_LAST_STAGE_INIT
+	WATCHDOG_RESET ();
+	/*
+	 * Some parts can be only initialized if all others (like
+	 * Interrupts) are up and running (i.e. the PC-style ISA
+	 * keyboard).
+	 */
+	last_stage_init ();
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+	WATCHDOG_RESET ();
+	bedbug_init ();
+#endif
+
+#ifdef CONFIG_PRAM
+	/*
+	 * Export available size of memory for Linux,
+	 * taking into account the protected RAM at top of memory
+	 */
+	{
+		ulong pram;
+		char *s;
+		uchar memsz[32];
+
+		if ((s = getenv ("pram")) != NULL) {
+			pram = simple_strtoul (s, NULL, 10);
+		} else {
+			pram = CONFIG_PRAM;
+		}
+		sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+		setenv ("mem", memsz);
+	}
+#endif
+
+	/* Initialization complete - start the monitor */
+
+	/* main_loop() can return to retry autoboot, if so just run it again. */
+	for (;;) {
+		WATCHDOG_RESET ();
+		main_loop ();
+	}
+
+	/* NOTREACHED - no way out of command loop except booting */
+}
+
+void hang (void)
+{
+	puts ("### ERROR ### Please RESET the board ###\n");
+	for (;;);
+}
+
+#if 0 /* We could use plain global data, but the resulting code is bigger */
+/*
+ * Pointer to initial global data area
+ *
+ * Here we initialize it.
+ */
+#undef	XTRN_DECLARE_GLOBAL_DATA_PTR
+#define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
+DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+#endif  /* 0 */
+
+/************************************************************************/
diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c
new file mode 100644
index 00000000000..2f90df0be89
--- /dev/null
+++ b/lib_ppc/extable.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern const struct exception_table_entry __start___ex_table[];
+extern const struct exception_table_entry __stop___ex_table[];
+
+static inline unsigned long
+search_one_table(const struct exception_table_entry *first,
+		 const struct exception_table_entry *last,
+		 unsigned long value)
+{
+        while (first <= last) {
+		const struct exception_table_entry *mid;
+		long diff;
+
+		mid = (last - first) / 2 + first;
+		diff = mid->insn - value;
+                if (diff == 0)
+                        return mid->fixup;
+                else if (diff < 0)
+                        first = mid+1;
+                else
+                        last = mid-1;
+        }
+        return 0;
+}
+
+int	ex_tab_message = 1;
+
+unsigned long
+search_exception_table(unsigned long addr)
+{
+	unsigned long ret;
+
+	/* There is only the kernel to search.  */
+	ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
+	if (ex_tab_message)
+		printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+	if (ret) return ret;
+
+	return 0;
+}
diff --git a/net/tftp.c b/net/tftp.c
new file mode 100644
index 00000000000..0ad244fd97b
--- /dev/null
+++ b/net/tftp.c
@@ -0,0 +1,326 @@
+/*
+ *	Copyright 1994, 1995, 2000 Neil Russell.
+ *	(See License)
+ *	Copyright 2000, 2001 DENX Software Engineering, Wolfgang Denk, wd@denx.de
+ */
+
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include "tftp.h"
+#include "bootp.h"
+
+#undef	ET_DEBUG
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+#define WELL_KNOWN_PORT	69		/* Well known TFTP port #		*/
+#define TIMEOUT		2		/* Seconds to timeout for a lost pkt	*/
+#ifndef	CONFIG_NET_RETRY_COUNT
+# define TIMEOUT_COUNT	10		/* # of timeouts before giving up  */
+#else
+# define TIMEOUT_COUNT  (CONFIG_NET_RETRY_COUNT * 2)
+#endif
+					/* (for checking the image size)	*/
+#define HASHES_PER_LINE	65		/* Number of "loading" hashes per line	*/
+
+/*
+ *	TFTP operations.
+ */
+#define TFTP_RRQ	1
+#define TFTP_WRQ	2
+#define TFTP_DATA	3
+#define TFTP_ACK	4
+#define TFTP_ERROR	5
+
+
+static int	TftpServerPort;		/* The UDP port at their end		*/
+static int	TftpOurPort;		/* The UDP port at our end		*/
+static int	TftpTimeoutCount;
+static unsigned	TftpBlock;
+static unsigned	TftpLastBlock;
+static int	TftpState;
+#define STATE_RRQ	1
+#define STATE_DATA	2
+#define STATE_TOO_LARGE	3
+#define STATE_BAD_MAGIC	4
+
+#define DEFAULT_NAME_LEN	(8 + 4 + 1)
+static char default_filename[DEFAULT_NAME_LEN];
+static char *tftp_filename;
+
+#ifdef CFG_DIRECT_FLASH_TFTP
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+#endif
+
+static __inline__ void
+store_block (unsigned block, uchar * src, unsigned len)
+{
+	ulong offset = block * 512, newsize = offset + len;
+#ifdef CFG_DIRECT_FLASH_TFTP
+	int i, rc = 0;
+
+	for (i=0; i<CFG_MAX_FLASH_BANKS; i++) {
+		/* start address in flash? */
+		if (load_addr + offset >= flash_info[i].start[0]) {
+			rc = 1;
+			break;
+		}
+	}
+
+	if (rc) { /* Flash is destination for this packet */
+		rc = flash_write ((uchar *)src, (ulong)(load_addr+offset), len);
+		if (rc) {
+			flash_perror (rc);
+			NetState = NETLOOP_FAIL;
+			return;
+		}
+	}
+	else
+#endif /* CFG_DIRECT_FLASH_TFTP */
+	{
+		(void)memcpy((void *)(load_addr + offset), src, len);
+	}
+
+	if (NetBootFileXferSize < newsize)
+		NetBootFileXferSize = newsize;
+}
+
+static void TftpSend (void);
+static void TftpTimeout (void);
+
+/**********************************************************************/
+
+static void
+TftpSend (void)
+{
+	volatile uchar *	pkt;
+	volatile uchar *	xp;
+	int			len = 0;
+
+	/*
+	 *	We will always be sending some sort of packet, so
+	 *	cobble together the packet headers now.
+	 */
+	pkt = NetTxPacket + ETHER_HDR_SIZE + IP_HDR_SIZE;
+
+	switch (TftpState) {
+
+	case STATE_RRQ:
+		xp = pkt;
+		*((ushort *)pkt)++ = htons(TFTP_RRQ);
+		strcpy ((char *)pkt, tftp_filename);
+		pkt += strlen(tftp_filename) + 1;
+		strcpy ((char *)pkt, "octet");
+		pkt += 5 /*strlen("octet")*/ + 1;
+		len = pkt - xp;
+		break;
+
+	case STATE_DATA:
+		xp = pkt;
+		*((ushort *)pkt)++ = htons(TFTP_ACK);
+		*((ushort *)pkt)++ = htons(TftpBlock);
+		len = pkt - xp;
+		break;
+
+	case STATE_TOO_LARGE:
+		xp = pkt;
+		*((ushort *)pkt)++ = htons(TFTP_ERROR);
+		*((ushort *)pkt)++ = htons(3);
+		strcpy ((char *)pkt, "File too large");
+		pkt += 14 /*strlen("File too large")*/ + 1;
+		len = pkt - xp;
+		break;
+
+	case STATE_BAD_MAGIC:
+		xp = pkt;
+		*((ushort *)pkt)++ = htons(TFTP_ERROR);
+		*((ushort *)pkt)++ = htons(2);
+		strcpy ((char *)pkt, "File has bad magic");
+		pkt += 18 /*strlen("File has bad magic")*/ + 1;
+		len = pkt - xp;
+		break;
+	}
+
+	NetSetEther (NetTxPacket, NetServerEther, PROT_IP);
+	NetSetIP (NetTxPacket + ETHER_HDR_SIZE, NetServerIP,
+					TftpServerPort, TftpOurPort, len);
+	NetSendPacket (NetTxPacket, ETHER_HDR_SIZE + IP_HDR_SIZE + len);
+}
+
+
+static void
+TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
+{
+	ushort proto;
+
+	if (dest != TftpOurPort) {
+		return;
+	}
+	if (TftpState != STATE_RRQ && src != TftpServerPort) {
+		return;
+	}
+
+	if (len < 2) {
+		return;
+	}
+	len -= 2;
+	/* warning: don't use increment (++) in ntohs() macros!! */
+	proto = *((ushort *)pkt)++;
+	switch (ntohs(proto)) {
+
+	case TFTP_RRQ:
+	case TFTP_WRQ:
+	case TFTP_ACK:
+		break;
+	default:
+		break;
+
+	case TFTP_DATA:
+		if (len < 2)
+			return;
+		len -= 2;
+		TftpBlock = ntohs(*(ushort *)pkt);
+		if (((TftpBlock - 1) % 10) == 0) {
+			putc ('#');
+		} else if ((TftpBlock % (10 * HASHES_PER_LINE)) == 0) {
+			puts ("\n\t ");
+		}
+
+		if (TftpState == STATE_RRQ) {
+			TftpState = STATE_DATA;
+			TftpServerPort = src;
+			TftpLastBlock = 0;
+
+			if (TftpBlock != 1) {	/* Assertion */
+				printf ("\nTFTP error: "
+					"First block is not block 1 (%d)\n"
+					"Starting again\n\n",
+					TftpBlock);
+				NetStartAgain ();
+				break;
+			}
+		}
+
+		if (TftpBlock == TftpLastBlock) {
+			/*
+			 *	Same block again; ignore it.
+			 */
+			break;
+		}
+
+		TftpLastBlock = TftpBlock;
+		NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout);
+
+		store_block (TftpBlock - 1, pkt + 2, len);
+
+		/*
+		 *	Acknoledge the block just received, which will prompt
+		 *	the server for the next one.
+		 */
+		TftpSend ();
+
+		if (len < 512) {
+			/*
+			 *	We received the whole thing.  Try to
+			 *	run it.
+			 */
+			puts ("\ndone\n");
+			NetState = NETLOOP_SUCCESS;
+		}
+		break;
+
+	case TFTP_ERROR:
+		printf ("\nTFTP error: '%s' (%d)\n",
+					pkt + 2, ntohs(*(ushort *)pkt));
+		puts ("Starting again\n\n");
+		NetStartAgain ();
+		break;
+	}
+}
+
+
+static void
+TftpTimeout (void)
+{
+	if (++TftpTimeoutCount >= TIMEOUT_COUNT) {
+		puts ("\nRetry count exceeded; starting again\n");
+		NetStartAgain ();
+	} else {
+		puts ("T ");
+		NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout);
+		TftpSend ();
+	}
+}
+
+
+void
+TftpStart (void)
+{
+#ifdef ET_DEBUG
+	printf ("\nServer ethernet address %02x:%02x:%02x:%02x:%02x:%02x\n",
+		NetServerEther[0],
+		NetServerEther[1],
+		NetServerEther[2],
+		NetServerEther[3],
+		NetServerEther[4],
+		NetServerEther[5]
+	);
+#endif /* DEBUG */
+
+	if (BootFile[0] == '\0') {
+		IPaddr_t OurIP = ntohl(NetOurIP);
+
+		sprintf(default_filename, "%02lX%02lX%02lX%02lX.img",
+			OurIP & 0xFF,
+			(OurIP >>  8) & 0xFF,
+			(OurIP >> 16) & 0xFF,
+			(OurIP >> 24) & 0xFF	);
+		tftp_filename = default_filename;
+
+		printf ("*** Warning: no boot file name; using '%s'\n",
+			tftp_filename);
+	} else {
+		tftp_filename = BootFile;
+	}
+
+	puts ("TFTP from server ");	print_IPaddr (NetServerIP);
+	puts ("; our IP address is ");	print_IPaddr (NetOurIP);
+
+	/* Check if we need to send across this subnet */
+	if (NetOurGatewayIP && NetOurSubnetMask) {
+	    IPaddr_t OurNet 	= NetOurIP    & NetOurSubnetMask;
+	    IPaddr_t ServerNet 	= NetServerIP & NetOurSubnetMask;
+
+	    if (OurNet != ServerNet) {
+		puts ("; sending through gateway ");
+		print_IPaddr (NetOurGatewayIP) ;
+	    }
+	}
+	putc ('\n');
+
+	printf ("Filename '%s'.", tftp_filename);
+
+	if (NetBootFileSize) {
+		printf (" Size is 0x%x Bytes = ", NetBootFileSize<<9);
+		print_size (NetBootFileSize<<9, "");
+	}
+
+	putc ('\n');
+
+	printf ("Load address: 0x%lx\n", load_addr);
+
+	puts ("Loading: *\b");
+
+	NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout);
+	NetSetHandler (TftpHandler);
+
+	TftpServerPort = WELL_KNOWN_PORT;
+	TftpTimeoutCount = 0;
+	TftpState = STATE_RRQ;
+	TftpOurPort = 1024 + (get_timer(0) % 3072);
+
+	TftpSend ();
+}
+
+#endif /* CFG_CMD_NET */
diff --git a/rtc/ds1302.c b/rtc/ds1302.c
new file mode 100644
index 00000000000..ec5616a6776
--- /dev/null
+++ b/rtc/ds1302.c
@@ -0,0 +1,327 @@
+/*
+ * ds1302.c - Support for the Dallas Semiconductor DS1302 Timekeeping Chip
+ *
+ * Rex G. Feany <rfeany@zumanetworks.com>
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+
+#if defined(CONFIG_RTC_DS1302) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+/* GPP Pins */
+#define DATA		0x200
+#define SCLK		0x400
+#define RST		0x800
+
+/* Happy Fun Defines(tm) */
+#define RESET		rtc_go_low(RST), rtc_go_low(SCLK)
+#define N_RESET		rtc_go_high(RST), rtc_go_low(SCLK)
+
+#define CLOCK_HIGH	rtc_go_high(SCLK)
+#define CLOCK_LOW	rtc_go_low(SCLK)
+
+#define DATA_HIGH	rtc_go_high(DATA)
+#define DATA_LOW	rtc_go_low(DATA)
+#define DATA_READ	(GTREGREAD(GPP_VALUE) & DATA)
+
+#undef RTC_DEBUG
+
+#ifdef RTC_DEBUG
+#  define DPRINTF(x,args...)	printf("ds1302: " x , ##args)
+static inline void DUMP(const char *ptr, int num)
+{
+	while (num--) printf("%x ", *ptr++);
+	printf("]\n");
+}
+#else
+#  define DPRINTF(x,args...)
+#  define DUMP(ptr, num)
+#endif
+
+/* time data format for DS1302 */
+struct ds1302_st
+{
+	unsigned char CH:1;		/* clock halt 1=stop 0=start */
+	unsigned char sec10:3;
+	unsigned char sec:4;
+
+	unsigned char zero0:1;
+	unsigned char min10:3;
+	unsigned char min:4;
+
+	unsigned char fmt:1;		/* 1=12 hour 0=24 hour */
+	unsigned char zero1:1;
+	unsigned char hr10:2;	/* 10 (0-2) or am/pm (am/pm, 0-1) */
+	unsigned char hr:4;
+
+	unsigned char zero2:2;
+	unsigned char date10:2;
+	unsigned char date:4;
+
+	unsigned char zero3:3;
+	unsigned char month10:1;
+	unsigned char month:4;
+
+	unsigned char zero4:5;
+	unsigned char day:3; 		/* day of week */
+
+	unsigned char year10:4;
+	unsigned char year:4;
+
+	unsigned char WP:1;		/* write protect 1=protect 0=unprot */
+	unsigned char zero5:7;
+};
+
+static int ds1302_initted=0;
+
+/* Pin control */
+static inline void
+rtc_go_high(unsigned int mask)
+{
+	unsigned int f = GTREGREAD(GPP_VALUE) | mask;
+
+	GT_REG_WRITE(GPP_VALUE, f);
+}
+
+static inline void
+rtc_go_low(unsigned int mask)
+{
+	unsigned int f = GTREGREAD(GPP_VALUE) & ~mask;
+
+	GT_REG_WRITE(GPP_VALUE, f);
+}
+
+static inline void
+rtc_go_input(unsigned int mask)
+{
+	unsigned int f = GTREGREAD(GPP_IO_CONTROL) & ~mask;
+
+	GT_REG_WRITE(GPP_IO_CONTROL, f);
+}
+
+static inline void
+rtc_go_output(unsigned int mask)
+{
+	unsigned int f = GTREGREAD(GPP_IO_CONTROL) | mask;
+
+	GT_REG_WRITE(GPP_IO_CONTROL, f);
+}
+
+/* Access data in RTC */
+
+static void
+write_byte(unsigned char b)
+{
+	int i;
+	unsigned char mask=1;
+
+	for(i=0;i<8;i++) {
+		CLOCK_LOW;			/* Lower clock */
+		(b&mask)?DATA_HIGH:DATA_LOW;	/* set data */
+		udelay(1);
+		CLOCK_HIGH;		/* latch data with rising clock */
+		udelay(1);
+		mask=mask<<1;
+	}
+}
+
+static unsigned char
+read_byte(void)
+{
+	int i;
+	unsigned char mask=1;
+	unsigned char b=0;
+
+	for(i=0;i<8;i++) {
+		CLOCK_LOW;
+		udelay(1);
+		if (DATA_READ) b|=mask;	/* if this bit is high, set in b */
+		CLOCK_HIGH;		/* clock out next bit */
+		udelay(1);
+		mask=mask<<1;
+	}
+	return b;
+}
+
+static void
+read_ser_drv(unsigned char addr, unsigned char *buf, int count)
+{
+	int i;
+#ifdef RTC_DEBUG
+	char *foo = buf;
+#endif
+
+	DPRINTF("READ 0x%x bytes @ 0x%x [ ", count, addr);
+
+	addr|=1;	/* READ */
+	N_RESET;
+	udelay(4);
+	write_byte(addr);
+	rtc_go_input(DATA); /* Put gpp pin into input mode */
+	udelay(1);
+	for(i=0;i<count;i++) *(buf++)=read_byte();
+	RESET;
+	rtc_go_output(DATA);/* Reset gpp for output */
+	udelay(4);
+
+	DUMP(foo, count);
+}
+
+static void
+write_ser_drv(unsigned char addr, unsigned char *buf, int count)
+{
+	int i;
+
+	DPRINTF("WRITE 0x%x bytes @ 0x%x [ ", count, addr);
+	DUMP(buf, count);
+
+	addr&=~1;	/* WRITE */
+	N_RESET;
+	udelay(4);
+	write_byte(addr);
+	for(i=0;i<count;i++) write_byte(*(buf++));
+	RESET;
+	udelay(4);
+
+}
+
+void
+rtc_init(void)
+{
+    	struct ds1302_st bbclk;
+	unsigned char b;
+	int mod;
+
+	DPRINTF("init\n");
+
+	rtc_go_output(DATA|SCLK|RST);
+
+	/* disable write protect */
+	b = 0;
+	write_ser_drv(0x8e,&b,1);
+
+	/* enable trickle */
+	b = 0xa5;	/* 1010.0101 */
+	write_ser_drv(0x90,&b,1);
+
+	/* read burst */
+	read_ser_drv(0xbe, (unsigned char *)&bbclk, 8);
+
+	/* Sanity checks */
+	mod = 0;
+	if (bbclk.CH) {
+		printf("ds1302: Clock was halted, starting clock\n");
+		bbclk.CH=0;
+		mod=1;
+	}
+
+	if (bbclk.fmt) {
+		printf("ds1302: Clock was in 12 hour mode, fixing\n");
+		bbclk.fmt=0;
+		mod=1;
+	}
+
+	if (bbclk.year>9) {
+		printf("ds1302: Year was corrupted, fixing\n");
+		bbclk.year10=100;	/* 2000 - why not? ;) */
+		bbclk.year=0;
+		mod=1;
+	}
+
+	/* Write out the changes if needed */
+	if (mod) {
+		/* enable write protect */
+		bbclk.WP = 1;
+		write_ser_drv(0xbe,(unsigned char *)&bbclk,8);
+	} else {
+		/* Else just turn write protect on */
+		b = 0x80;
+		write_ser_drv(0x8e,&b,1);
+	}
+	DPRINTF("init done\n");
+
+	ds1302_initted=1;
+}
+
+void
+rtc_reset(void)
+{
+	if(!ds1302_initted) rtc_init();
+	/* TODO */
+}
+
+void
+rtc_get(struct rtc_time *tmp)
+{
+	struct ds1302_st bbclk;
+
+	if(!ds1302_initted) rtc_init();
+
+	read_ser_drv(0xbe,(unsigned char *)&bbclk, 8);      /* read burst */
+
+	if (bbclk.CH) {
+		printf("ds1302: rtc_get: Clock was halted, clock probably "
+			"corrupt\n");
+	}
+
+	tmp->tm_sec=10*bbclk.sec10+bbclk.sec;
+	tmp->tm_min=10*bbclk.min10+bbclk.min;
+	tmp->tm_hour=10*bbclk.hr10+bbclk.hr;
+	tmp->tm_wday=bbclk.day;
+	tmp->tm_mday=10*bbclk.date10+bbclk.date;
+	tmp->tm_mon=10*bbclk.month10+bbclk.month;
+	tmp->tm_year=10*bbclk.year10+bbclk.year + 1900;
+
+	tmp->tm_yday = 0;
+	tmp->tm_isdst= 0;
+
+	DPRINTF("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
+}
+
+void
+rtc_set(struct rtc_time *tmp)
+{
+	struct ds1302_st bbclk;
+	unsigned char b=0;
+
+	if(!ds1302_initted) rtc_init();
+
+	DPRINTF("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	memset(&bbclk,0,sizeof(bbclk));
+	bbclk.CH=0; /* dont halt */
+	bbclk.WP=1; /* write protect when we're done */
+
+	bbclk.sec10=tmp->tm_sec/10;
+	bbclk.sec=tmp->tm_sec%10;
+
+	bbclk.min10=tmp->tm_min/10;
+	bbclk.min=tmp->tm_min%10;
+
+	bbclk.hr10=tmp->tm_hour/10;
+	bbclk.hr=tmp->tm_hour%10;
+
+	bbclk.day=tmp->tm_wday;
+
+	bbclk.date10=tmp->tm_mday/10;
+	bbclk.date=tmp->tm_mday%10;
+
+	bbclk.month10=tmp->tm_mon/10;
+	bbclk.month=tmp->tm_mon%10;
+
+	tmp->tm_year -= 1900;
+	bbclk.year10=tmp->tm_year/10;
+	bbclk.year=tmp->tm_year%10;
+
+	write_ser_drv(0x8e,&b,1);           /* disable write protect */
+	write_ser_drv(0xbe,(unsigned char *)&bbclk, 8);     /* write burst */
+}
+
+#endif
diff --git a/rtc/pcf8563.c b/rtc/pcf8563.c
new file mode 100644
index 00000000000..97b09b87254
--- /dev/null
+++ b/rtc/pcf8563.c
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for Philips PCF8563 RTC
+ */
+
+/* #define	DEBUG	*/
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <i2c.h>
+
+#if defined(CONFIG_RTC_PCF8563) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+static uchar rtc_read  (uchar reg);
+static void  rtc_write (uchar reg, uchar val);
+static uchar bin2bcd   (unsigned int n);
+static unsigned bcd2bin(uchar c);
+
+/* ------------------------------------------------------------------------- */
+
+void rtc_get (struct rtc_time *tmp)
+{
+	uchar sec, min, hour, mday, wday, mon_cent, year;
+
+	sec	= rtc_read (0x02);
+	min	= rtc_read (0x03);
+	hour	= rtc_read (0x04);
+	mday	= rtc_read (0x05);
+	wday	= rtc_read (0x06);
+	mon_cent= rtc_read (0x07);
+	year	= rtc_read (0x08);
+
+	debug ( "Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
+		"hr: %02x min: %02x sec: %02x\n",
+		year, mon_cent, mday, wday,
+		hour, min, sec );
+	debug ( "Alarms: wday: %02x day: %02x hour: %02x min: %02x\n",
+		rtc_read (0x0C),
+		rtc_read (0x0B),
+		rtc_read (0x0A),
+		rtc_read (0x09) );
+
+	if (sec & 0x80) {
+		printf ("### Warning: RTC Low Voltage - date/time not reliable\n");
+	}
+
+	tmp->tm_sec  = bcd2bin (sec  & 0x7F);
+	tmp->tm_min  = bcd2bin (min  & 0x7F);
+	tmp->tm_hour = bcd2bin (hour & 0x3F);
+	tmp->tm_mday = bcd2bin (mday & 0x3F);
+	tmp->tm_mon  = bcd2bin (mon_cent & 0x1F);
+	tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
+	tmp->tm_wday = bcd2bin (wday & 0x07);
+	tmp->tm_yday = 0;
+	tmp->tm_isdst= 0;
+
+	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+}
+
+void rtc_set (struct rtc_time *tmp)
+{
+	uchar century;
+
+	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+	rtc_write (0x08, bin2bcd(tmp->tm_year % 100));
+
+	century = (tmp->tm_year >= 2000) ? 0x80 : 0;
+	rtc_write (0x07, bin2bcd(tmp->tm_mon) | century);
+
+	rtc_write (0x06, bin2bcd(tmp->tm_wday));
+	rtc_write (0x05, bin2bcd(tmp->tm_mday));
+	rtc_write (0x04, bin2bcd(tmp->tm_hour));
+	rtc_write (0x03, bin2bcd(tmp->tm_min ));
+	rtc_write (0x02, bin2bcd(tmp->tm_sec ));
+}
+
+void rtc_reset (void)
+{
+	/* clear all control & status registers */
+	rtc_write (0x00, 0x00);
+	rtc_write (0x01, 0x00);
+	rtc_write (0x0D, 0x00);
+
+	/* clear Voltage Low bit */
+	rtc_write (0x02, rtc_read (0x02) & 0x7F);
+
+	/* reset all alarms */
+	rtc_write (0x09, 0x00);
+	rtc_write (0x0A, 0x00);
+	rtc_write (0x0B, 0x00);
+	rtc_write (0x0C, 0x00);
+}
+
+/* ------------------------------------------------------------------------- */
+
+static uchar rtc_read (uchar reg)
+{
+	return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg));
+}
+
+static void rtc_write (uchar reg, uchar val)
+{
+	i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val);
+}
+
+static unsigned bcd2bin (uchar n)
+{
+	return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+	return (((n / 10) << 4) | (n % 10));
+}
+
+#endif	/* CONFIG_RTC_PCF8563 && CFG_CMD_DATE */
diff --git a/tools/bddb/README b/tools/bddb/README
new file mode 100644
index 00000000000..778e41c1da8
--- /dev/null
+++ b/tools/bddb/README
@@ -0,0 +1,116 @@
+Hymod Board Database
+
+(C) Copyright 2001
+Murray Jensen <Murray.Jensen@cmst.csiro.au>
+CSIRO Manufacturing Science and Technology, Preston Lab
+
+25-Jun-01
+
+This stuff is a set of PHP/MySQL scripts to implement a custom board
+database. It will need *extensive* hacking to modify it to keep the
+information about your custom boards that you want, however it is a good
+starting point.
+
+How it is used:
+
+	1. a board has gone through all the hardware testing etc and is
+	   ready to have the flash programmed for the first time - first you
+	   go to a web page and fill in information about the board in a form
+	   to register it in a database
+
+	2. the web stuff allocates a (unique) serial number and (optionally)
+	   a (locally administered) ethernet address and stores the information
+	   in a database using the serial number as the key (can do whole
+	   batches of boards in one go and/or use a previously registered board
+	   as defaults for the new board(s))
+
+	3. it then creates a file in the tftp area of a server somewhere
+	   containing the board information in a simple text format (one
+	   per serial number)
+
+	4. all hymod boards have an i2c eeprom, and when U-Boot sees that
+	   the eeprom is unitialised, it prompts for a serial number and
+	   ethernet address (if not set), then transfers the file created
+	   in step 3 from the server and initialises the eeprom from its
+	   contents
+
+What this means is you can't boot the board until you have allocated a serial
+number, but you don't have to type it all twice - you do it once on the web
+and the board then finds the info it needs to initialise its eeprom. The
+other side of the coin is the reading of the eeprom and how it gets passed
+to Linux (or another O/S).
+
+To see how this is all done for the hymod boards look at the code in the
+"board/hymod" directory and in the file "include/asm/hymod.h". Hymod boards
+can have a mezzanine card which also have an eeprom that needs allocating,
+the same process is used for these as well - just a different i2c address.
+
+Other forms provide the following functions:
+
+	- browsing the board database
+	- editing board information (one at a time)
+	- maintaining/browsing a (simple) per board event log
+
+You will need: MySQL (I use version 3.23.7-alpha), PHP4 (with MySQL
+support enabled) and a web server (I use Apache 1.3.x).
+
+I originally started by using phpMyBuilder (http://kyber.dk/phpMyBuilder)
+but it soon got far more complicated than that could handle (but I left
+the copyright messages in there anyway). Most of the code resides in the
+common defs.php file, which shouldn't need much alteration - all the work
+will be in shaping the front-end php files to your liking.
+
+Here's a quick summary of what needs doing to use it for your boards:
+
+1. get phpMyAdmin (http://phpwizard.net/projects/phpMyAdmin/) - it's an
+   invaluable tool for this sort of stuff (this step is optional of course)
+
+2. edit "bddb.css" to your taste, if you could be bothered - I have no
+   idea what is in there or what it does - I copied it from somewhere else
+   ("user.css" from the phpMyEdit (http://phpmyedit.sourcerforge.net) package,
+   I think) - I figure one day I'll see what sort of things I can change
+   in there.
+
+3. create a mysql database - call it whatever you like
+
+4. edit "create_tables.sql" and modify the "boards" table schema to
+   reflect the information you want to keep about your boards. It may or
+   may not be easier to do this and the next step in phpMyAdmin. Check out
+   the MySQL documentation at http://www.mysql.com/doc/ in particular the
+   column types at http://www.mysql.com/doc/C/o/Column_types.html - Note
+   there is only support for a few data types:
+
+	int		- presented as an html text input
+	char/text	- presented as an html text input
+	date		- presented as an html text input
+	enum		- presented as an html radio input
+
+   I also have what I call "enum_multi" which is a set of enums with the
+   same name, but suffixed with a number e.g. fred0, fred1, fred2. These
+   are presented as a number of html select's with a single label "fred"
+   this is useful for board characteristics that have multiple items of
+   the same type e.g. multiple banks of sdram.
+
+5. use the "create_tables.sql" file to create the "boards" table in the
+   database e.g. mysql dbname < create_tables.sql
+
+6. create a user and password for the web server to log into the MySQL
+   database with; give this user select, insert and update privileges
+   to the database created in 3 (and delete, if you want the "delete"
+   functions in the edit forms to work- I have this turned off). phpMyAdmin
+   helps in this step.
+
+7. edit "config.php" and set the variables: $mysql_user, $mysql_pw, $mysql_db,
+   $bddb_cfgdir and $bddb_label - keep the contents of this file secret - it
+   contains the web servers username and password (the three $mysql_* vars
+   are set from the previous step)
+
+8. edit "defs.php" and a. adjust the various enum value arrays and b. edit
+   the function "pg_foot()" to remove my email address :-)
+
+9. do major hacking on the following files: browse.php, doedit.php, donew.php,
+   edit.php and new.php to reflect your database schema - fortunately the
+   hacking is fairly straight-forward, but it is boring and time-consuming.
+
+These notes were written rather hastily - if you find any obvious problems
+please let me know.
diff --git a/tools/bddb/brlog.php b/tools/bddb/brlog.php
new file mode 100644
index 00000000000..6e98c9c4813
--- /dev/null
+++ b/tools/bddb/brlog.php
@@ -0,0 +1,106 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// list page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Browse Board Log");
+
+	if (!isset($serno) || $serno == 0)
+		die("serial number not specified!");
+
+	function print_cell($str) {
+		if ($str == '')
+			$str = '&nbsp;';
+		echo "\t<td>$str</td>\n";
+	}
+?>
+<table align=center border=1 cellpadding=10>
+<tr>
+<th>serno / edit</th>
+<th>ethaddr</th>
+<th>date</th>
+<th>batch</th>
+<th>type</th>
+<th>rev</th>
+<th>location</th>
+</tr>
+<?php
+	$r=mysql_query("select * from boards where serno=$serno");
+
+	while($row=mysql_fetch_array($r)){
+		foreach ($columns as $key) {
+			if (!key_in_array($key, $row))
+				$row[$key] = '';
+		}
+
+		echo "<tr>\n";
+		print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>");
+		print_cell($row['ethaddr']);
+		print_cell($row['date']);
+		print_cell($row['batch']);
+		print_cell($row['type']);
+		print_cell($row['rev']);
+		print_cell($row['location']);
+		echo "</tr>\n";
+	}
+
+	mysql_free_result($r);
+?>
+</table>
+<hr></hr>
+<p></p>
+<?php
+	$limit=abs(isset($limit)?$limit:20);
+	$offset=abs(isset($offset)?$offset:0);
+	$lr=mysql_query("select count(*) as n from log where serno=$serno");
+	$lrow=mysql_fetch_array($lr);
+	if($lrow['n']>$limit){
+		$preoffset=max(0,$offset-$limit);
+		$postoffset=$offset+$limit;
+		echo "<table width=\"100%\">\n<tr align=center>\n";
+		printf("<td><%sa href=\"%s?serno=$serno&offset=%d\"><img border=0 alt=\"&lt;\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
+		printf("<td><%sa href=\"%s?serno=$serno&offset=%d\"><img border=0 alt=\"&gt;\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
+		echo "</tr>\n</table>\n";
+	}
+	mysql_free_result($lr);
+?>
+<table width="100%" border=1 cellpadding=10>
+<tr valign=top>
+<th>logno / edit</th>
+<th>date</th>
+<th width="70%">details</th>
+</tr>
+<?php
+	$r=mysql_query("select * from log where serno=$serno order by logno limit $offset,$limit");
+
+	while($row=mysql_fetch_array($r)){
+		echo "<tr>\n";
+		print_cell("<a href=\"edlog.php?serno=$row[serno]&logno=$row[logno]\">$row[logno]</a>");
+		print_cell($row['date']);
+		print_cell("<pre>" . urldecode($row['details']) . "</pre>");
+		echo "</tr>\n";
+	}
+
+	mysql_free_result($r);
+?>
+</table>
+<hr></hr>
+<p></p>
+<table width="100%">
+<tr>
+  <td align=center>
+    <a href="newlog.php?serno=<?php echo "$serno"; ?>">Add to Log</a>
+  </td>
+  <td align=center>
+    <a href="index.php">Back to Start</a>
+  </td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/browse.php b/tools/bddb/browse.php
new file mode 100644
index 00000000000..b7cd5089510
--- /dev/null
+++ b/tools/bddb/browse.php
@@ -0,0 +1,130 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// list page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	if (!isset($verbose))
+		$verbose = 0;
+
+	if (!isset($serno))
+		$serno = 0;
+
+	pg_head("$bddb_label - Browse database" . ($verbose?" (verbose)":""));
+?>
+<p></p>
+<?php
+	if ($serno == 0) {
+		$limit=abs(isset($limit)?$limit:20);
+		$offset=abs(isset($offset)?$offset:0);
+		$lr=mysql_query("select count(*) as n from boards");
+		$lrow=mysql_fetch_array($lr);
+		if($lrow['n']>$limit){
+			$preoffset=max(0,$offset-$limit);
+			$postoffset=$offset+$limit;
+			echo "<table width=\"100%\">\n<tr align=center>\n";
+			printf("<td><%sa href=\"%s?offset=%d\"><img border=0 alt=\"&lt;\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
+			printf("<td><%sa href=\"%s?offset=%d\"><img border=0 alt=\"&gt;\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
+			echo "</tr>\n</table>\n";
+		}
+		mysql_free_result($lr);
+	}
+?>
+<table align=center border=1 cellpadding=10>
+<tr>
+<th></th>
+<th>serno / edit</th>
+<th>ethaddr</th>
+<th>date</th>
+<th>batch</th>
+<th>type</th>
+<th>rev</th>
+<th>location</th>
+<?php
+	if ($verbose) {
+		echo "<th>comments</th>\n";
+		echo "<th>sdram</th>\n";
+		echo "<th>flash</th>\n";
+		echo "<th>zbt</th>\n";
+		echo "<th>xlxtyp</th>\n";
+		echo "<th>xlxspd</th>\n";
+		echo "<th>xlxtmp</th>\n";
+		echo "<th>xlxgrd</th>\n";
+		echo "<th>cputyp</th>\n";
+		echo "<th>cpuspd</th>\n";
+		echo "<th>cpmspd</th>\n";
+		echo "<th>busspd</th>\n";
+		echo "<th>hstype</th>\n";
+		echo "<th>hschin</th>\n";
+		echo "<th>hschout</th>\n";
+	}
+?>
+</tr>
+<?php
+	if ($serno == 0)
+		$r=mysql_query("select * from boards order by serno limit $offset,$limit");
+	else
+		$r=mysql_query("select * from boards where serno=$serno");
+
+	function print_cell($str) {
+		if ($str == '')
+			$str = '&nbsp;';
+		echo "\t<td>$str</td>\n";
+	}
+
+	while($row=mysql_fetch_array($r)){
+		foreach ($columns as $key) {
+			if (!key_in_array($key, $row))
+				$row[$key] = '';
+		}
+
+		echo "<tr>\n";
+		print_cell("<a href=\"brlog.php?serno=$row[serno]\">Log</a>");
+		print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>");
+		print_cell($row['ethaddr']);
+		print_cell($row['date']);
+		print_cell($row['batch']);
+		print_cell($row['type']);
+		print_cell($row['rev']);
+		print_cell($row['location']);
+		if ($verbose) {
+			print_cell("<pre>\n" . urldecode($row['comments']) .
+				"\n\t</pre>");
+			print_cell(gather_enum_multi_print("sdram", 4, $row));
+			print_cell(gather_enum_multi_print("flash", 4, $row));
+			print_cell(gather_enum_multi_print("zbt", 16, $row));
+			print_cell(gather_enum_multi_print("xlxtyp", 4, $row));
+			print_cell(gather_enum_multi_print("xlxspd", 4, $row));
+			print_cell(gather_enum_multi_print("xlxtmp", 4, $row));
+			print_cell(gather_enum_multi_print("xlxgrd", 4, $row));
+			print_cell($row['cputyp']);
+			print_cell($row['cpuspd']);
+			print_cell($row['cpmspd']);
+			print_cell($row['busspd']);
+			print_cell($row['hstype']);
+			print_cell($row['hschin']);
+			print_cell($row['hschout']);
+		}
+		echo "</tr>\n";
+	}
+?>
+</table>
+<p></p>
+<table width="100%">
+<tr>
+  <td align=center><?php
+	if ($verbose)
+		echo "<a href=\"browse.php?verbose=0\">Terse Listing</a>";
+	else
+		echo "<a href=\"browse.php?verbose=1\">Verbose Listing</a>";
+  ?></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/config.php b/tools/bddb/config.php
new file mode 100644
index 00000000000..8d54993c586
--- /dev/null
+++ b/tools/bddb/config.php
@@ -0,0 +1,16 @@
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// mysql database access info
+	$mysql_user="fred";
+	$mysql_pw="apassword";
+	$mysql_db="mydbname";
+
+	// where to put the eeprom config files
+	$bddb_cfgdir = '/tftpboot/bddb';
+
+	// what this database is called
+	$bddb_label = 'Hymod Board Database';
+?>
diff --git a/tools/bddb/create_tables.sql b/tools/bddb/create_tables.sql
new file mode 100644
index 00000000000..aa007c16c8b
--- /dev/null
+++ b/tools/bddb/create_tables.sql
@@ -0,0 +1,90 @@
+# phpMyAdmin MySQL-Dump
+# http://phpwizard.net/phpMyAdmin/
+#
+# Host: localhost Database : hymod_bddb
+
+# (C) Copyright 2001
+# Murray Jensen <Murray.Jensen@cmst.csiro.au>
+# CSIRO Manufacturing Science and Technology, Preston Lab
+
+# --------------------------------------------------------
+#
+# Table structure for table 'boards'
+#
+
+DROP TABLE IF EXISTS boards;
+CREATE TABLE boards (
+   serno int(10) unsigned zerofill NOT NULL auto_increment,
+   ethaddr char(17),
+   date date NOT NULL,
+   batch char(32),
+   type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY') NOT NULL,
+   rev tinyint(3) unsigned zerofill NOT NULL,
+   location char(64),
+   comments text,
+   sdram0 enum('32M','64M','128M','256M'),
+   sdram1 enum('32M','64M','128M','256M'),
+   sdram2 enum('32M','64M','128M','256M'),
+   sdram3 enum('32M','64M','128M','256M'),
+   flash0 enum('4M','8M','16M','32M','64M'),
+   flash1 enum('4M','8M','16M','32M','64M'),
+   flash2 enum('4M','8M','16M','32M','64M'),
+   flash3 enum('4M','8M','16M','32M','64M'),
+   zbt0 enum('512K','1M','2M','4M'),
+   zbt1 enum('512K','1M','2M','4M'),
+   zbt2 enum('512K','1M','2M','4M'),
+   zbt3 enum('512K','1M','2M','4M'),
+   zbt4 enum('512K','1M','2M','4M'),
+   zbt5 enum('512K','1M','2M','4M'),
+   zbt6 enum('512K','1M','2M','4M'),
+   zbt7 enum('512K','1M','2M','4M'),
+   zbt8 enum('512K','1M','2M','4M'),
+   zbt9 enum('512K','1M','2M','4M'),
+   zbta enum('512K','1M','2M','4M'),
+   zbtb enum('512K','1M','2M','4M'),
+   zbtc enum('512K','1M','2M','4M'),
+   zbtd enum('512K','1M','2M','4M'),
+   zbte enum('512K','1M','2M','4M'),
+   zbtf enum('512K','1M','2M','4M'),
+   xlxtyp0 enum('XCV300E','XCV400E','XCV600E'),
+   xlxtyp1 enum('XCV300E','XCV400E','XCV600E'),
+   xlxtyp2 enum('XCV300E','XCV400E','XCV600E'),
+   xlxtyp3 enum('XCV300E','XCV400E','XCV600E'),
+   xlxspd0 enum('6','7','8'),
+   xlxspd1 enum('6','7','8'),
+   xlxspd2 enum('6','7','8'),
+   xlxspd3 enum('6','7','8'),
+   xlxtmp0 enum('COM','IND'),
+   xlxtmp1 enum('COM','IND'),
+   xlxtmp2 enum('COM','IND'),
+   xlxtmp3 enum('COM','IND'),
+   xlxgrd0 enum('NORMAL','ENGSAMP'),
+   xlxgrd1 enum('NORMAL','ENGSAMP'),
+   xlxgrd2 enum('NORMAL','ENGSAMP'),
+   xlxgrd3 enum('NORMAL','ENGSAMP'),
+   cputyp enum('MPC8260'),
+   cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ'),
+   cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ'),
+   busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ'),
+   hstype enum('AMCC-S2064A'),
+   hschin enum('0','1','2','3','4'),
+   hschout enum('0','1','2','3','4'),
+   PRIMARY KEY (serno),
+   KEY serno (serno),
+   UNIQUE serno_2 (serno)
+);
+
+#
+# Table structure for table 'log'
+#
+
+DROP TABLE IF EXISTS log;
+CREATE TABLE log (
+   logno int(10) unsigned zerofill NOT NULL auto_increment,
+   serno int(10) unsigned zerofill NOT NULL,
+   date date NOT NULL,
+   details text NOT NULL,
+   PRIMARY KEY (logno),
+   KEY logno (logno, serno, date),
+   UNIQUE logno_2 (logno)
+);
diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php
new file mode 100644
index 00000000000..0393dbda644
--- /dev/null
+++ b/tools/bddb/defs.php
@@ -0,0 +1,663 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// contains mysql user id and password - keep secret
+	require("config.php");
+
+	if (isset($logout)) {
+		Header("status: 401 Unauthorized");
+		Header("HTTP/1.0 401 Unauthorized");
+		Header("WWW-authenticate: basic realm=\"$bddb_label\"");
+
+		echo "<html><head><title>" .
+			"Access to '$bddb_label' Denied" .
+			"</title></head>\n";
+		echo "<body bgcolor=#ffffff><br></br><br></br><center><h1>" .
+			"You must be an Authorised User " .
+			"to access the '$bddb_label'" .
+			"</h1>\n</center></body></html>\n";
+		exit;
+	}
+
+	// contents of the various enumerated types - if first item is
+	// empty ('') then the enum is allowed to be null (ie "not null"
+	// is not set on the column)
+
+	// all column names in the database table
+	$columns = array(
+		'serno','ethaddr','date','batch',
+		'type','rev','location','comments',
+		'sdram0','sdram1','sdram2','sdram3',
+		'flash0','flash1','flash2','flash3',
+		'zbt0','zbt1','zbt2','zbt3','zbt4','zbt5','zbt6','zbt7',
+		'zbt8','zbt9','zbta','zbtb','zbtc','zbtd','zbte','zbtf',
+		'xlxtyp0','xlxtyp1','xlxtyp2','xlxtyp3',
+		'xlxspd0','xlxspd1','xlxspd2','xlxspd3',
+		'xlxtmp0','xlxtmp1','xlxtmp2','xlxtmp3',
+		'xlxgrd0','xlxgrd1','xlxgrd2','xlxgrd3',
+		'cputyp','cpuspd','cpmspd','busspd',
+		'hstype','hschin','hschout'
+	);
+
+	// board type
+	$type_vals = array('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY');
+
+	// sdram sizes (nbits array is for write into eeprom config file)
+	$sdram_vals = array('','32M','64M','128M','256M');
+	$sdram_nbits = array(0,25,26,27,28);
+
+	// flash sizes (nbits array is for write into eeprom config file)
+	$flash_vals = array('','4M','8M','16M','32M','64M');
+	$flash_nbits = array(0,22,23,24,25,26);
+
+	// zbt ram sizes (nbits array is for write into eeprom config file)
+	$zbt_vals = array('','512K','1M','2M','4M');
+	$zbt_nbits = array(0,19,20,21,22);
+
+	// Xilinx attributes
+	$xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E');
+	$xlxspd_vals = array('','6','7','8');
+	$xlxtmp_vals = array('','COM','IND');
+	$xlxgrd_vals = array('','NORMAL','ENGSAMP');
+
+	// processor attributes
+	$cputyp_vals = array('','MPC8260');
+	$clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ');
+
+	// high-speed serial attributes
+	$hstype_vals = array('','AMCC-S2064A');
+	$hschin_vals = array('0','1','2','3','4');
+	$hschout_vals = array('0','1','2','3','4');
+
+	// value filters - used when outputting html
+	function rev_filter($num) {
+		if ($num == 0)
+			return "001";
+		else
+			return sprintf("%03d", $num);
+	}
+
+	function text_filter($str) {
+		return urldecode($str);
+	}
+
+	mt_srand(time() | getmypid());
+
+	// set up MySQL connection
+	mysql_connect("", $mysql_user, $mysql_pw) || die("cannot connect");
+	mysql_select_db($mysql_db) || die("cannot select db");
+
+	// page header
+	function pg_head($title)
+	{
+		echo "<html>\n<head>\n";
+		echo "<link rel=stylesheet href=\"bddb.css\" type=\"text/css\" title=\"style sheet\"></link>\n";
+		echo "<title>$title</title>\n";
+		echo "</head>\n";
+		echo "<body>\n";
+		echo "<center><h1>$title</h1></center>\n";
+		echo "<hr></hr>\n";
+	}
+
+	// page footer
+	function pg_foot()
+	{
+		echo "<hr></hr>\n";
+		echo "<table width=\"100%\"><tr><td align=left>\n<address>" .
+			"If you have any problems, email " .
+			"<a href=\"mailto:Murray.Jensen@cmst.csiro.au\">" .
+			"Murray Jensen" .
+			"</a></address>\n" .
+			"</td><td align=right>\n" .
+			"<a href=\"index.php?logout=true\">logout</a>\n" .
+			"</td></tr></table>\n";
+		echo "<p><small><i>Made with " .
+		    "<a href=\"http://kyber.dk/phpMyBuilder/\">" .
+		    "Kyber phpMyBuilder</a></i></small></p>\n";
+		echo "</body>\n";
+		echo "</html>\n";
+	}
+
+	// some support functions
+
+	if (!function_exists('array_search')) {
+
+		function array_search($needle, $haystack, $strict = false) {
+
+			if (is_array($haystack) && count($haystack)) {
+
+				$ntype = gettype($needle);
+
+				foreach ($haystack as $key => $value) {
+
+					if ($value == $needle && (!$strict ||
+					    gettype($value) == $ntype))
+						return $key;
+				}
+			}
+
+			return false;
+		}
+	}
+
+	if (!function_exists('in_array')) {
+
+		function in_array($needle, $haystack, $strict = false) {
+
+			if (is_array($haystack) && count($haystack)) {
+
+				$ntype = gettype($needle);
+
+				foreach ($haystack as $key => $value) {
+
+					if ($value == $needle && (!$strict ||
+					    gettype($value) == $ntype))
+						return true;
+				}
+			}
+
+			return false;
+		}
+	}
+
+	function key_in_array($key, $array) {
+		return in_array($key, array_keys($array), true);
+	}
+
+	function enum_to_index($name, $vals) {
+		$index = array_search($GLOBALS[$name], $vals);
+		if ($vals[0] != '')
+		        $index++;
+		return $index;
+	}
+
+	// fetch a value from an array - return empty string is not present
+	function get_key_value($key, $array) {
+		if (key_in_array($key, $array))
+			return $array[$key];
+		else
+			return '';
+	}
+
+	function fprintf() {
+		$n = func_num_args();
+		if ($n < 2)
+			return FALSE;
+		$a = func_get_args();
+		$fp = array_shift($a);
+		$x = "\$s = sprintf";
+		$sep = '(';
+		foreach ($a as $z) {
+			$x .= "$sep'$z'";
+			$sep = ',';
+		}
+		$x .= ');';
+		eval($x);
+		$l = strlen($s);
+		$r = fwrite($fp, $s, $l);
+		if ($r != $l)
+			return FALSE;
+		else
+			return TRUE;
+	}
+
+	// functions to display (print) a database table and its columns
+
+	function begin_table($ncols) {
+		global $table_ncols;
+		$table_ncols = $ncols;
+		echo "<table align=center width=\"100%\""
+			. " border=1 cellpadding=4 cols=$table_ncols>\n";
+	}
+
+	function begin_field($name, $span = 0) {
+		global $table_ncols;
+		echo "<tr valign=top>\n";
+		echo "\t<th align=center>$name</th>\n";
+		if ($span <= 0)
+			$span = $table_ncols - 1;
+		if ($span > 1)
+			echo "\t<td colspan=$span>\n";
+		else
+			echo "\t<td>\n";
+	}
+
+	function cont_field($span = 1) {
+		echo "\t</td>\n";
+		if ($span > 1)
+			echo "\t<td colspan=$span>\n";
+		else
+			echo "\t<td>\n";
+	}
+
+	function end_field() {
+		echo "\t</td>\n";
+		echo "</tr>\n";
+	}
+
+	function end_table() {
+		echo "</table>\n";
+	}
+
+	function print_field($name, $array, $size = 0, $filt='') {
+
+		begin_field($name);
+
+		if (key_in_array($name, $array))
+			$value = $array[$name];
+		else
+			$value = '';
+
+		if ($filt != '')
+			$value = $filt($value);
+
+		echo "\t\t<input name=$name value=\"$value\"";
+		if ($size > 0)
+			echo " size=$size maxlength=$size";
+		echo "></input>\n";
+
+		end_field();
+	}
+
+	function print_field_multiline($name, $array, $cols, $rows, $filt='') {
+
+		begin_field($name);
+
+		if (key_in_array($name, $array))
+			$value = $array[$name];
+		else
+			$value = '';
+
+		if ($filt != '')
+			$value = $filt($value);
+
+		echo "\t\t<textarea name=$name " .
+			"cols=$cols rows=$rows wrap=off>\n";
+		echo "$value";
+		echo "</textarea>\n";
+
+		end_field();
+	}
+
+	// print a mysql ENUM as an html RADIO INPUT
+	function print_enum($name, $array, $vals, $def = -1) {
+
+		begin_field($name);
+
+		if (key_in_array($name, $array))
+			$chk = array_search($array[$name], $vals, FALSE);
+		else
+			$chk = $def;
+
+		$nval = count($vals);
+
+		for ($i = 0; $i < $nval; $i++) {
+
+			$val = $vals[$i];
+			if ($val == '')
+				$pval = "none";
+			else
+				$pval = "$val";
+
+			printf("\t\t<input type=radio name=$name"
+				. " value=\"$val\"%s>$pval</input>\n",
+				$i == $chk ? " checked" : "");
+		}
+
+		end_field();
+	}
+
+	// print a group of mysql ENUMs (e.g. name0,name1,...) as an html SELECT
+	function print_enum_multi($base, $array, $vals, $cnt, $defs, $grp = 0) {
+
+		global $table_ncols;
+
+		if ($grp <= 0)
+			$grp = $cnt;
+		$ncell = $cnt / $grp;
+		$span = ($table_ncols - 1) / $ncell;
+
+		begin_field($base, $span);
+
+		$nval = count($vals);
+
+		for ($i = 0; $i < $cnt; $i++) {
+
+			if ($i > 0 && ($i % $grp) == 0)
+				cont_field($span);
+
+			$name = sprintf("%s%x", $base, $i);
+
+			echo "\t\t<select name=$name>\n";
+
+			if (key_in_array($name, $array))
+				$ai = array_search($array[$name], $vals, FALSE);
+			else {
+				if (key_in_array($i, $defs))
+					$ai = $defs[$i];
+				else
+					$ai = 0;
+			}
+
+			for ($j = 0; $j < $nval; $j++) {
+
+				$val = $vals[$j];
+				if ($val == '')
+					$pval = "&nbsp;";
+				else
+					$pval = "$val";
+
+				printf("\t\t\t<option " .
+					"value=\"%s\"%s>%s</option>\n",
+					$val,
+					$j == $ai ? " selected" : "",
+					$pval);
+			}
+
+			echo "\t\t</select>\n";
+		}
+
+		end_field();
+	}
+
+	// functions to handle the form input
+
+	// fetch all the parts of an "enum_multi" into a string suitable
+	// for a MySQL query
+	function gather_enum_multi_query($base, $cnt) {
+
+		$retval = '';
+
+		for ($i = 0; $i < $cnt; $i++) {
+
+			$name = sprintf("%s%x", $base, $i);
+
+			if (isset($GLOBALS[$name])) {
+				$retval .= sprintf(", %s='%s'",
+					$name, $GLOBALS[$name]);
+			}
+		}
+
+		return $retval;
+	}
+
+	// fetch all the parts of an "enum_multi" into a string suitable
+	// for a display e.g. in an html table cell
+	function gather_enum_multi_print($base, $cnt, $array) {
+
+		$retval = '';
+
+		for ($i = 0; $i < $cnt; $i++) {
+
+			$name = sprintf("%s%x", $base, $i);
+
+			if ($array[$name] != '') {
+				if ($retval != '')
+					$retval .= ',';
+				$retval .= $array[$name];
+			}
+		}
+
+		return $retval;
+	}
+
+	// fetch all the parts of an "enum_multi" into a string suitable
+	// for writing to the eeprom data file
+	function gather_enum_multi_write($base, $cnt, $vals, $xfrm = array()) {
+
+		$retval = '';
+
+		for ($i = 0; $i < $cnt; $i++) {
+
+			$name = sprintf("%s%x", $base, $i);
+
+			if ($GLOBALS[$name] != '') {
+				if ($retval != '')
+					$retval .= ',';
+				$index = enum_to_index($name, $vals);
+				if ($xfrm != array())
+					$retval .= $xfrm[$index];
+				else
+					$retval .= $index;
+			}
+		}
+
+		return $retval;
+	}
+
+	// count how many parts of an "enum_multi" are actually set
+	function count_enum_multi($base, $cnt) {
+
+		$retval = 0;
+
+		for ($i = 0; $i < $cnt; $i++) {
+
+			$name = sprintf("%s%x", $base, $i);
+
+			if (isset($GLOBALS[$name]))
+				$retval++;
+		}
+
+		return $retval;
+	}
+
+	// ethernet address functions
+
+	// generate a (possibly not unique) random vendor ethernet address
+	// (setting bit 6 in the ethernet address - motorola wise i.e. bit 0
+	// is the most significant bit - means it is not an assigned ethernet
+	// address). Also, make sure it is NOT a multicast ethernet address.
+	function gen_eth_addr($serno) {
+
+		$ethaddr_high = (mt_rand(0, 65535) & 0xfeff) | 0x0200;
+		$ethaddr_low = mt_rand(0, 4294967295);
+
+		return sprintf("%02lx:%02lx:%02lx:%02lx:%02lx:%02lx",
+			$ethaddr_high >> 8, $ethaddr_high & 0xff,
+			$ethaddr_low >> 24, ($ethaddr_low >> 16) & 0xff,
+			($ethaddr_low >> 8) & 0xff, $ethaddr_low & 0xff);
+	}
+
+	// check that an ethernet address is valid
+	function eth_addr_is_valid($ethaddr) {
+
+		$ethbytes = split(':', $ethaddr);
+
+		if (count($ethbytes) != 6)
+			return FALSE;
+
+		for ($i = 0; $i < 6; $i++) {
+			$ethbyte = $ethbytes[$i];
+			if (!ereg('^[0-9a-f][0-9a-f]$', $ethbyte))
+				return FALSE;
+		}
+
+		return TRUE;
+	}
+
+	// write a simple eeprom configuration file
+	function write_eeprom_cfg_file() {
+
+		global $sernos, $nsernos, $bddb_cfgdir, $numerrs, $cfgerrs;
+		global $date, $batch, $type_vals, $rev;
+		global $sdram_vals, $sdram_nbits;
+		global $flash_vals, $flash_nbits;
+		global $zbt_vals, $zbt_nbits;
+		global $xlxtyp_vals, $xlxspd_vals, $xlxtmp_vals, $xlxgrd_vals;
+		global $cputyp, $cputyp_vals, $clk_vals;
+		global $hstype, $hstype_vals, $hschin, $hschout;
+
+		$numerrs = 0;
+		$cfgerrs = array();
+
+		for ($i = 0; $i < $nsernos; $i++) {
+
+			$serno = sprintf("%010d", $sernos[$i]);
+
+			$wfp = @fopen($bddb_cfgdir . "/$serno.cfg", "w");
+			if (!$wfp) {
+				$cfgerrs[$i] = 'file create fail';
+				$numerrs++;
+				continue;
+			}
+			set_file_buffer($wfp, 0);
+
+			if (!fprintf($wfp, "serno=%d\n", $sernos[$i])) {
+				$cfgerrs[$i] = 'cfg wr fail (serno)';
+				fclose($wfp);
+				$numerrs++;
+				continue;
+			}
+
+			if (!fprintf($wfp, "date=%s\n", $date)) {
+				$cfgerrs[$i] = 'cfg wr fail (date)';
+				fclose($wfp);
+				$numerrs++;
+				continue;
+			}
+
+			if ($batch != '') {
+				if (!fprintf($wfp, "batch=%s\n", $batch)) {
+					$cfgerrs[$i] = 'cfg wr fail (batch)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$typei = enum_to_index("type", $type_vals);
+			if (!fprintf($wfp, "type=%d\n", $typei)) {
+				$cfgerrs[$i] = 'cfg wr fail (type)';
+				fclose($wfp);
+				$numerrs++;
+				continue;
+			}
+
+			if (!fprintf($wfp, "rev=%d\n", $rev)) {
+				$cfgerrs[$i] = 'cfg wr fail (rev)';
+				fclose($wfp);
+				$numerrs++;
+				continue;
+			}
+
+			$s = gather_enum_multi_write("sdram", 4,
+				$sdram_vals, $sdram_nbits);
+			if ($s != '') {
+				$b = fprintf($wfp, "sdram=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (sdram)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$s = gather_enum_multi_write("flash", 4,
+				$flash_vals, $flash_nbits);
+			if ($s != '') {
+				$b = fprintf($wfp, "flash=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (flash)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$s = gather_enum_multi_write("zbt", 16,
+				$zbt_vals, $zbt_nbits);
+			if ($s != '') {
+				$b = fprintf($wfp, "zbt=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (zbt)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$s = gather_enum_multi_write("xlxtyp", 4, $xlxtyp_vals);
+			if ($s != '') {
+				$b = fprintf($wfp, "xlxtyp=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (xlxtyp)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$s = gather_enum_multi_write("xlxspd", 4, $xlxspd_vals);
+			if ($s != '') {
+				$b = fprintf($wfp, "xlxspd=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (xlxspd)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$s = gather_enum_multi_write("xlxtmp", 4, $xlxtmp_vals);
+			if ($s != '') {
+				$b = fprintf($wfp, "xlxtmp=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (xlxtmp)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			$s = gather_enum_multi_write("xlxgrd", 4, $xlxgrd_vals);
+			if ($s != '') {
+				$b = fprintf($wfp, "xlxgrd=%s\n", $s);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (xlxgrd)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			if ($cputyp != '') {
+				$cputypi = enum_to_index("cputyp",$cputyp_vals);
+				$cpuspdi = enum_to_index("cpuspd", $clk_vals);
+				$busspdi = enum_to_index("busspd", $clk_vals);
+				$cpmspdi = enum_to_index("cpmspd", $clk_vals);
+				$b = fprintf($wfp, "cputyp=%d\ncpuspd=%d\n" .
+					"busspd=%d\ncpmspd=%d\n",
+					$cputypi, $cpuspdi, $busspdi, $cpmspdi);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (cputyp)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			if ($hstype != '') {
+				$hstypei = enum_to_index("hstype",$hstype_vals);
+				$b = fprintf($wfp, "hstype=%d\n" .
+					"hschin=%s\nhschout=%s\n",
+					$hstypei, $hschin, $hschout);
+				if (!$b) {
+					$cfgerrs[$i] = 'cfg wr fail (hstype)';
+					fclose($wfp);
+					$numerrs++;
+					continue;
+				}
+			}
+
+			if (!fclose($wfp)) {
+				$cfgerrs[$i] = 'file cls fail';
+				$numerrs++;
+			}
+		}
+
+		return $numerrs;
+	}
+?>
diff --git a/tools/bddb/dodelete.php b/tools/bddb/dodelete.php
new file mode 100644
index 00000000000..839ad8cf107
--- /dev/null
+++ b/tools/bddb/dodelete.php
@@ -0,0 +1,64 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// dodelete page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Delete Board Results");
+
+	if (!($serno=intval($serno)))
+		die("the board serial number was not specified");
+
+	mysql_query("delete from boards where serno=$serno");
+
+	if(mysql_errno()) {
+		$errstr = mysql_error();
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $errstr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+	else {
+		echo "\t<font size=+2>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe board with serial number <b>$serno</b> was"
+			. " successfully deleted\n";
+		mysql_query("delete from log where serno=$serno");
+		if (mysql_errno()) {
+			$errstr = mysql_error();
+			echo "\t\t\t<font size=+4>\n";
+			echo "\t\t\t\t<p>\n";
+			echo "\t\t\t\t\tBut the following error occurred " .
+				"when deleting the log entries:\n";
+			echo "\t\t\t\t</p>\n";
+			echo "\t\t\t\t<center>\n";
+			printf("\t\t\t\t\t<b>%s</b>\n", $errstr);
+			echo "\t\t\t\t</center>\n";
+			echo "\t\t\t</font>\n";
+		}
+		echo "\t\t</p>\n";
+		echo "\t</font>\n";
+	}
+?>
+<p>
+<table width="100%">
+<tr>
+  <td align=center>
+    <a href="browse.php">Back to Browse</a>
+  </td>
+  <td align=center>
+    <a href="index.php">Back to Start</a>
+  </td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/dodellog.php b/tools/bddb/dodellog.php
new file mode 100644
index 00000000000..d5822c5fd19
--- /dev/null
+++ b/tools/bddb/dodellog.php
@@ -0,0 +1,55 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// dodelete page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Delete Log Entry Results");
+
+	if (!($serno=intval($serno)))
+		die("the board serial number was not specified");
+
+	if (!isset($logno) || $logno == 0)
+		die("the log entry number not specified!");
+
+	mysql_query("delete from log where serno=$serno and logno=$logno");
+
+	if(mysql_errno()) {
+		$errstr = mysql_error();
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $errstr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+	else {
+		echo "\t<font size=+2>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe log entry with log number <b>$logno</b>\n";
+		echo "\t\t\tand serial number <b>$serno</b> ";
+		echo "was successfully deleted\n";
+		echo "\t\t</p>\n";
+		echo "\t</font>\n";
+	}
+?>
+<p>
+<table width="100%">
+<tr>
+  <td align=center>
+    <a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a>
+  </td>
+  <td align=center>
+    <a href="index.php">Back to Start</a>
+  </td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/doedit.php b/tools/bddb/doedit.php
new file mode 100644
index 00000000000..110ecf39fee
--- /dev/null
+++ b/tools/bddb/doedit.php
@@ -0,0 +1,170 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// doedit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Edit Board Results");
+
+	if ($serno == 0)
+		die("the board serial number was not specified");
+
+	$query="update boards set";
+
+	if (isset($ethaddr)) {
+		if (!eth_addr_is_valid($ethaddr))
+			die("ethaddr is invalid ('$ethaddr')");
+		$query.=" ethaddr='$ethaddr',";
+	}
+
+	if (isset($date)) {
+		list($y, $m, $d) = split("-", $date);
+		if (!checkdate($m, $d, $y) || $y < 1999)
+			die("date is invalid (input '$date', " .
+				"yyyy-mm-dd '$y-$m-$d')");
+		$query.=" date='$date'";
+	}
+
+	if (isset($batch)) {
+		if (strlen($batch) > 32)
+			die("batch field too long (>32)");
+		$query.=", batch='$batch'";
+	}
+
+	if (isset($type)) {
+		if (!in_array($type, $type_vals))
+			die("Invalid type ($type) specified");
+		$query.=", type='$type'";
+	}
+
+	if (isset($rev)) {
+		if (($rev = intval($rev)) <= 0 || $rev > 255)
+			die("Revision number is invalid ($rev)");
+		$query.=sprintf(", rev=%d", $rev);
+	}
+
+	if (isset($location)) {
+		if (strlen($location) > 64)
+			die("location field too long (>64)");
+		$query.=", location='$location'";
+	}
+
+	if (isset($comments))
+		$query.=", comments='" . rawurlencode($comments) . "'";
+
+	$query.=gather_enum_multi_query("sdram", 4);
+
+	$query.=gather_enum_multi_query("flash", 4);
+
+	$query.=gather_enum_multi_query("zbt", 16);
+
+	$query.=gather_enum_multi_query("xlxtyp", 4);
+	$nxlx = count_enum_multi("xlxtyp", 4);
+
+	$query.=gather_enum_multi_query("xlxspd", 4);
+	if (count_enum_multi("xlxspd", 4) != $nxlx)
+		die("number of xilinx speeds not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxtmp", 4);
+	if (count_enum_multi("xlxtmp", 4) != $nxlx)
+		die("number of xilinx temps. not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxgrd", 4);
+	if (count_enum_multi("xlxgrd", 4) != $nxlx)
+		die("number of xilinx grades not same as number of types");
+
+	if (isset($cputyp)) {
+		$query.=", cputyp='$cputyp'";
+		if ($cpuspd == '')
+			die("must specify cpu speed if cpu type is defined");
+		$query.=", cpuspd='$cpuspd'";
+		if ($cpmspd == '')
+			die("must specify cpm speed if cpu type is defined");
+		$query.=", cpmspd='$cpmspd'";
+		if ($busspd == '')
+			die("must specify bus speed if cpu type is defined");
+		$query.=", busspd='$busspd'";
+	}
+	else {
+		if (isset($cpuspd))
+			die("can't specify cpu speed if there is no cpu");
+		if (isset($cpmspd))
+			die("can't specify cpm speed if there is no cpu");
+		if (isset($busspd))
+			die("can't specify bus speed if there is no cpu");
+	}
+
+	if (isset($hschin)) {
+		if (($hschin = intval($hschin)) < 0 || $hschin > 4)
+			die("Invalid number of hs input chans ($hschin)");
+	}
+	else
+		$hschin = 0;
+	if (isset($hschout)) {
+		if (($hschout = intval($hschout)) < 0 || $hschout > 4)
+			die("Invalid number of hs output chans ($hschout)");
+	}
+	else
+		$hschout = 0;
+	if (isset($hstype))
+		$query.=", hstype='$hstype'";
+	else {
+		if ($hschin != 0)
+			die("number of high-speed input channels must be zero"
+				. " if high-speed chip is not present");
+		if ($hschout != 0)
+			die("number of high-speed output channels must be zero"
+				. " if high-speed chip is not present");
+	}
+	$query.=", hschin='$hschin'";
+	$query.=", hschout='$hschout'";
+
+	$query.=" where serno=$serno";
+
+	mysql_query($query);
+	if(mysql_errno()) {
+		$errstr = mysql_error();
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $errstr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+	else {
+		$sernos = array($serno);
+		$nsernos = 1;
+
+		write_eeprom_cfg_file();
+
+		echo "\t<font size=+2>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe board with serial number <b>$serno</b> was"
+			. " successfully updated";
+		if ($numerrs > 0) {
+			$errstr = $cfgerrs[0];
+			echo "<br>\n\t\t\t";
+			echo "(but the cfg file update failed: $errstr)";
+		}
+		echo "\n";
+		echo "\t\t</p>\n";
+		echo "\t</font>\n";
+	}
+
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center><a href="browse.php">Back to Browse</a></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/doedlog.php b/tools/bddb/doedlog.php
new file mode 100644
index 00000000000..db27c37eb93
--- /dev/null
+++ b/tools/bddb/doedlog.php
@@ -0,0 +1,66 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// doedit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Edit Log Entry Results");
+
+	if ($serno == 0)
+		die("the board serial number was not specified");
+
+	if (!isset($logno) || $logno == 0)
+		die("log number not specified!");
+
+	$query="update log set";
+
+	if (isset($date)) {
+		list($y, $m, $d) = split("-", $date);
+		if (!checkdate($m, $d, $y) || $y < 1999)
+			die("date is invalid (input '$date', " .
+				"yyyy-mm-dd '$y-$m-$d')");
+		$query.=" date='$date'";
+	}
+
+	if (isset($details))
+		$query.=", details='" . rawurlencode($details) . "'";
+
+	$query.=" where serno=$serno and logno=$logno";
+
+	mysql_query($query);
+	if(mysql_errno()) {
+		$errstr = mysql_error();
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $errstr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+	else {
+		echo "\t<font size=+2>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe log entry with log number <b>$logno</b> and\n";
+		echo "\t\t\tserial number <b>$serno</b> ";
+		echo "was successfully updated\n";
+		echo "\t\t</p>\n";
+		echo "\t</font>\n";
+	}
+
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/donew.php b/tools/bddb/donew.php
new file mode 100644
index 00000000000..0f6e0d75ece
--- /dev/null
+++ b/tools/bddb/donew.php
@@ -0,0 +1,228 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// doedit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Board Registration Results");
+
+	if (($serno=intval($serno)) != 0)
+		die("serial number must not be set ($serno) when Creating!");
+
+	$query="update boards set";
+
+	list($y, $m, $d) = split("-", $date);
+	if (!checkdate($m, $d, $y) || $y < 1999)
+		die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
+	$query.=" date='$date'";
+
+	if ($batch != '') {
+		if (strlen($batch) > 32)
+			die("batch field too long (>32)");
+		$query.=", batch='$batch'";
+	}
+
+	if (!in_array($type, $type_vals))
+		die("Invalid type ($type) specified");
+	$query.=", type='$type'";
+
+	if (($rev = intval($rev)) <= 0 || $rev > 255)
+		die("Revision number is invalid ($rev)");
+	$query.=sprintf(", rev=%d", $rev);
+
+	$query.=gather_enum_multi_query("sdram", 4);
+
+	$query.=gather_enum_multi_query("flash", 4);
+
+	$query.=gather_enum_multi_query("zbt", 16);
+
+	$query.=gather_enum_multi_query("xlxtyp", 4);
+	$nxlx = count_enum_multi("xlxtyp", 4);
+
+	$query.=gather_enum_multi_query("xlxspd", 4);
+	if (count_enum_multi("xlxspd", 4) != $nxlx)
+		die("number of xilinx speeds not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxtmp", 4);
+	if (count_enum_multi("xlxtmp", 4) != $nxlx)
+		die("number of xilinx temps. not same as number of types");
+
+	$query.=gather_enum_multi_query("xlxgrd", 4);
+	if (count_enum_multi("xlxgrd", 4) != $nxlx)
+		die("number of xilinx grades not same as number of types");
+
+	if ($cputyp == '') {
+		if ($cpuspd != '')
+			die("can't specify cpu speed if there is no cpu");
+		if ($cpmspd != '')
+			die("can't specify cpm speed if there is no cpu");
+		if ($busspd != '')
+			die("can't specify bus speed if there is no cpu");
+	}
+	else {
+		$query.=", cputyp='$cputyp'";
+		if ($cpuspd == '')
+			die("must specify cpu speed if cpu type is defined");
+		$query.=", cpuspd='$cpuspd'";
+		if ($cpmspd == '')
+			die("must specify cpm speed if cpu type is defined");
+		$query.=", cpmspd='$cpmspd'";
+		if ($busspd == '')
+			die("must specify bus speed if cpu type is defined");
+		$query.=", busspd='$busspd'";
+	}
+
+	if (($hschin = intval($hschin)) < 0 || $hschin > 4)
+		die("Invalid number of hs input chans ($hschin)");
+	if (($hschout = intval($hschout)) < 0 || $hschout > 4)
+		die("Invalid number of hs output chans ($hschout)");
+	if ($hstype == '') {
+		if ($hschin != 0)
+			die("number of high-speed input channels must be zero"
+				. " if high-speed chip is not present");
+		if ($hschout != 0)
+			die("number of high-speed output channels must be zero"
+				. " if high-speed chip is not present");
+	}
+	else
+		$query.=", hstype='$hstype'";
+	$query.=", hschin='$hschin'";
+	$query.=", hschout='$hschout'";
+
+	// echo "final query = '$query'<br>\n";
+
+	$quant = intval($quant);
+	if ($quant <= 0) $quant = 1;
+
+	$sernos = array();
+	if ($geneths)
+		$ethaddrs = array();
+
+	$sqlerr = '';
+
+	while ($quant-- > 0) {
+
+		mysql_query("insert into boards (serno) values (null)");
+		if (mysql_errno()) {
+			$sqlerr = mysql_error();
+			break;
+		}
+
+		$serno = mysql_insert_id();
+		if (!$serno) {
+			$sqlerr = "couldn't allocate new serial number";
+			break;
+		}
+
+		mysql_query($query . " where serno=$serno");
+		if (mysql_errno()) {
+			$sqlerr = mysql_error();
+			break;
+		}
+
+		array_push($sernos, $serno);
+
+		if ($geneths) {
+
+			$ethaddr = gen_eth_addr($serno);
+
+			mysql_query("update boards set ethaddr='$ethaddr'" .
+			    " where serno=$serno");
+			if (mysql_errno()) {
+				$sqlerr = mysql_error();
+
+				array_push($ethaddrs,
+					"<font color=#ff0000><b>" .
+					"db save fail" .
+					"</b></font>");
+				break;
+			}
+
+			array_push($ethaddrs, $ethaddr);
+		}
+	}
+
+	$nsernos = count($sernos);
+
+	if ($nsernos > 0) {
+
+		write_eeprom_cfg_file();
+
+		echo "<font size=+2>\n";
+		echo "\t<p>\n";
+		echo "\t\tThe following board serial numbers were"
+			. " successfully allocated";
+		if ($numerrs > 0)
+			echo " (but with $numerrs cfg file error" .
+				($numerrs > 1 ? "s" : "") . ")";
+		echo ":\n";
+		echo "\t</p>\n";
+
+		echo "</font>\n";
+
+		echo "<table align=center width=\"100%\">\n";
+		echo "<tr>\n";
+		echo "\t<th>Serial Number</th>\n";
+		if ($numerrs > 0)
+			echo "\t<th>Cfg File Errs</th>\n";
+		if ($geneths)
+			echo "\t<th>Ethernet Address</th>\n";
+		echo "</tr>\n";
+
+		for ($i = 0; $i < $nsernos; $i++) {
+
+			$serno = sprintf("%010d", $sernos[$i]);
+
+			echo "<tr>\n";
+
+			echo "\t<td align=center><font size=+2>" .
+				"<b>$serno</b></font></td>\n";
+
+			if ($numerrs > 0) {
+				if (($errstr = $cfgerrs[$i]) == '')
+					$errstr = '&nbsp;';
+				echo "\t<td align=center>" .
+					"<font size=+2 color=#ff0000><b>" .
+					$errstr .
+					"</b></font></td>\n";
+			}
+
+			if ($geneths) {
+				echo "\t<td align=center>" .
+					"<font size=+2 color=#00ff00><b>" .
+					$ethaddrs[$i] .
+					"</b></font></td>\n";
+			}
+
+			echo "</tr>\n";
+		}
+
+		echo "</table>\n";
+	}
+
+	if ($sqlerr != '') {
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following SQL error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $sqlerr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center><a href="browse.php">Go to Browse</a></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/donewlog.php b/tools/bddb/donewlog.php
new file mode 100644
index 00000000000..b00de955bc5
--- /dev/null
+++ b/tools/bddb/donewlog.php
@@ -0,0 +1,76 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// doedit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Add Log Entry Results");
+
+	if ($serno == 0)
+		die("serial number not specified!");
+
+	if (isset($logno))
+		die("log number must not be set ($logno) when Creating!");
+
+	$query="update log set serno=$serno";
+
+	list($y, $m, $d) = split("-", $date);
+	if (!checkdate($m, $d, $y) || $y < 1999)
+		die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
+	$query.=", date='$date'";
+
+	if (isset($details))
+		$query.=", details='" . rawurlencode($details) . "'";
+
+	// echo "final query = '$query'<br>\n";
+
+	$sqlerr = '';
+
+	mysql_query("insert into log (logno) values (null)");
+	if (mysql_errno())
+		$sqlerr = mysql_error();
+	else {
+		$logno = mysql_insert_id();
+		if (!$logno)
+			$sqlerr = "couldn't allocate new serial number";
+		else {
+			mysql_query($query . " where logno=$logno");
+			if (mysql_errno())
+				$sqlerr = mysql_error();
+		}
+	}
+
+	if ($sqlerr == '') {
+		echo "<font size=+2>\n";
+		echo "\t<p>\n";
+		echo "\t\tA log entry with log number '$logno' was " .
+			"added to the board with serial number '$serno'\n";
+		echo "\t</p>\n";
+		echo "</font>\n";
+	}
+	else {
+		echo "\t<font size=+4>\n";
+		echo "\t\t<p>\n";
+		echo "\t\t\tThe following SQL error was encountered:\n";
+		echo "\t\t</p>\n";
+		echo "\t\t<center>\n";
+		printf("\t\t\t<b>%s</b>\n", $sqlerr);
+		echo "\t\t</center>\n";
+		echo "\t</font>\n";
+	}
+
+?>
+<p></p>
+<table width="100%">
+<tr>
+  <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Go to Browse</a></td>
+  <td align=center><a href="index.php">Back to Start</a></td>
+</tr>
+</table>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/edit.php b/tools/bddb/edit.php
new file mode 100644
index 00000000000..f7d48307980
--- /dev/null
+++ b/tools/bddb/edit.php
@@ -0,0 +1,131 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// edit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Edit Board Registration");
+
+	if ($serno == 0)
+		die("serial number not specified!");
+
+	$pserno = sprintf("%010d", $serno);
+
+	echo "<center><b><font size=+2>";
+	echo "Board Serial Number: $pserno";
+	echo "</font></b></center>\n";
+
+?>
+<p>
+<form action=doedit.php method=POST>
+<?php
+	echo "<input type=hidden name=serno value=$serno>\n";
+
+	$r=mysql_query("select * from boards where serno=$serno");
+	$row=mysql_fetch_array($r);
+	if(!$row) die("no record of serial number '$serno' in database");
+
+	begin_table(5);
+
+	// ethaddr char(17)
+	print_field("ethaddr", $row, 17);
+
+	// date date
+	print_field("date", $row);
+
+	// batch char(32)
+	print_field("batch", $row, 32);
+
+	// type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY')
+	print_enum("type", $row, $type_vals);
+
+	// rev tinyint(3) unsigned zerofill
+	print_field("rev", $row, 3, 'rev_filter');
+
+	// location char(64)
+	print_field("location", $row, 64);
+
+	// comments text
+	print_field_multiline("comments", $row, 60, 10, 'text_filter');
+
+	// sdram[0-3] enum('32M','64M','128M','256M')
+	print_enum_multi("sdram", $row, $sdram_vals, 4, array());
+
+	// flash[0-3] enum('4M','8M','16M','32M','64M')
+	print_enum_multi("flash", $row, $flash_vals, 4, array());
+
+	// zbt[0-f] enum('512K','1M','2M','4M')
+	print_enum_multi("zbt", $row, $zbt_vals, 16, array());
+
+	// xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E')
+	print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(), 1);
+
+	// xlxspd[0-3] enum('6','7','8')
+	print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(), 1);
+
+	// xlxtmp[0-3] enum('COM','IND')
+	print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(), 1);
+
+	// xlxgrd[0-3] enum('NORMAL','ENGSAMP')
+	print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(), 1);
+
+	// cputyp enum('MPC8260')
+	print_enum("cputyp", $row, $cputyp_vals);
+
+	// cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
+	print_enum("cpuspd", $row, $clk_vals);
+
+	// cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
+	print_enum("cpmspd", $row, $clk_vals);
+
+	// busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
+	print_enum("busspd", $row, $clk_vals);
+
+	// hstype enum('AMCC-S2064A')
+	print_enum("hstype", $row, $hstype_vals);
+
+	// hschin enum('0','1','2','3','4')
+	print_enum("hschin", $row, $hschin_vals);
+
+	// hschout enum('0','1','2','3','4')
+	print_enum("hschout", $row, $hschout_vals);
+
+	end_table();
+
+	echo "<p>\n";
+	echo "<center><b>";
+	echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>";
+	echo "<br></br>\n";
+	echo "<tt>[ <a href=\"dodelete.php?serno=$serno\">delete</a> ]</tt>";
+	echo "</b></center>\n";
+	echo "</p>\n";
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center>
+    <input type=submit value=Edit>
+  </td>
+  <td>
+    &nbsp;
+  </td>
+  <td align=center>
+    <input type=reset value=Reset>
+  </td>
+  <td>
+    &nbsp;
+  </td>
+  <td align=center>
+    <a href="index.php">Back to Start</a>
+  </td>
+</tr>
+</table>
+</p>
+</form>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/edlog.php b/tools/bddb/edlog.php
new file mode 100644
index 00000000000..f819b46a0de
--- /dev/null
+++ b/tools/bddb/edlog.php
@@ -0,0 +1,81 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// edit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - Edit Board Log Entry");
+
+	if ($serno == 0)
+		die("serial number not specified!");
+
+	if (!isset($logno) || $logno == 0)
+		die("log number not specified!");
+
+	$pserno = sprintf("%010d", $serno);
+	$plogno = sprintf("%010d", $logno);
+
+	echo "<center><b><font size=+2>";
+	echo "Board Serial Number: $pserno, Log Number: $plogno";
+	echo "</font></b></center>\n";
+
+?>
+<p>
+<form action=doedlog.php method=POST>
+<?php
+	echo "<input type=hidden name=serno value=$serno>\n";
+	echo "<input type=hidden name=logno value=$logno>\n";
+
+	$r=mysql_query("select * from log where serno=$serno and logno=$logno");
+	$row=mysql_fetch_array($r);
+	if(!$row)
+		die("no record of log entry with serial number '$serno' " .
+			"and log number '$logno' in database");
+
+	begin_table(3);
+
+	// date date
+	print_field("date", $row);
+
+	// details text
+	print_field_multiline("details", $row, 60, 10, 'text_filter');
+
+	end_table();
+
+	echo "<p>\n";
+	echo "<center><b>";
+	echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>";
+	echo "<br></br>\n";
+	echo "<tt>[ <a href=\"dodellog.php?serno=$serno&logno=$logno\">delete</a> ]</tt>";
+	echo "</b></center>\n";
+	echo "</p>\n";
+?>
+<p>
+<table align=center width="100%">
+<tr>
+  <td align=center>
+    <input type=submit value=Edit>
+  </td>
+  <td>
+    &nbsp;
+  </td>
+  <td align=center>
+    <input type=reset value=Reset>
+  </td>
+  <td>
+    &nbsp;
+  </td>
+  <td align=center>
+    <a href="index.php">Back to Start</a>
+  </td>
+</tr>
+</table>
+</p>
+</form>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/execute.php b/tools/bddb/execute.php
new file mode 100644
index 00000000000..7adcfec2018
--- /dev/null
+++ b/tools/bddb/execute.php
@@ -0,0 +1,37 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	if (!isset($serno))
+		$serno = 0;
+	else
+		$serno = intval($serno);
+
+	if (!isset($submit))
+		$submit = "[NOT SET]";
+
+	switch ($submit) {
+
+	case "New":
+		require("new.php");
+		break;
+
+	case "Edit":
+		require("edit.php");
+		break;
+
+	case "Browse":
+		require("browse.php");
+		break;
+
+	case "Log":
+		require("brlog.php");
+		break;
+
+	default:
+		require("badsubmit.php");
+		break;
+	}
+?>
diff --git a/tools/bddb/index.php b/tools/bddb/index.php
new file mode 100644
index 00000000000..9d6c7f59963
--- /dev/null
+++ b/tools/bddb/index.php
@@ -0,0 +1,38 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	require("defs.php");
+	pg_head("$bddb_label");
+?>
+<font size="+4">
+  <form action=execute.php method=POST>
+    <table width="100%" cellspacing=10 cellpadding=10>
+      <tr>
+	<td align=center>
+	  <input type=submit name=submit value="New"></input>
+	</td>
+	<td align=center>
+	  <input type=submit name=submit value="Edit"></input>
+	</td>
+	<td align=center>
+	  <input type=submit name=submit value="Browse"></input>
+	</td>
+	<td align=center>
+	  <input type=submit name=submit value="Log"></input>
+	</td>
+      </tr>
+      <tr>
+	<td align=center colspan=4>
+	  <b>Serial Number:</b>
+	  <input type=text name=serno size=10 maxsize=10 value=""></input>
+	</td>
+      </tr>
+    </table>
+  </form>
+</font>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/new.php b/tools/bddb/new.php
new file mode 100644
index 00000000000..889c6ae6a54
--- /dev/null
+++ b/tools/bddb/new.php
@@ -0,0 +1,121 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// edit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - New Board Registration");
+?>
+<form action=donew.php method=POST>
+<p></p>
+<?php
+	// if a serial number was supplied, fetch the record
+	// and use its contents as defaults
+	if ($serno != 0) {
+		$r=mysql_query("select * from boards where serno=$serno");
+		$row=mysql_fetch_array($r);
+		if(!$row)die("no record of serial number '$serno' in database");
+	}
+	else
+		$row = array();
+
+	echo "<input type=hidden name=serno value=0>\n";
+
+	begin_table(5);
+
+	// date date
+	print_field("date", array('date' => date("Y-m-d")));
+
+	// batch char(32)
+	print_field("batch", $row, 32);
+
+	// type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY')
+	print_enum("type", $row, $type_vals, 0);
+
+	// rev tinyint(3) unsigned zerofill
+	print_field("rev", $row, 3, 'rev_filter');
+
+	// sdram[0-3] enum('32M','64M','128M','256M')
+	print_enum_multi("sdram", $row, $sdram_vals, 4, array(2));
+
+	// flash[0-3] enum('4M','8M','16M','32M','64M')
+	print_enum_multi("flash", $row, $flash_vals, 4, array(2));
+
+	// zbt[0-f] enum('512K','1M','2M','4M')
+	print_enum_multi("zbt", $row, $zbt_vals, 16, array(2, 2));
+
+	// xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E')
+	print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(1), 1);
+
+	// xlxspd[0-3] enum('6','7','8')
+	print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(1), 1);
+
+	// xlxtmp[0-3] enum('COM','IND')
+	print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(1), 1);
+
+	// xlxgrd[0-3] enum('NORMAL','ENGSAMP')
+	print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(1), 1);
+
+	// cputyp enum('MPC8260')
+	print_enum("cputyp", $row, $cputyp_vals, 1);
+
+	// cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
+	print_enum("cpuspd", $row, $clk_vals, 4);
+
+	// cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
+	print_enum("cpmspd", $row, $clk_vals, 4);
+
+	// busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ')
+	print_enum("busspd", $row, $clk_vals, 2);
+
+	// hstype enum('AMCC-S2064A')
+	print_enum("hstype", $row, $hstype_vals, 1);
+
+	// hschin enum('0','1','2','3','4')
+	print_enum("hschin", $row, $hschin_vals, 4);
+
+	// hschout enum('0','1','2','3','4')
+	print_enum("hschout", $row, $hschout_vals, 4);
+
+	end_table();
+?>
+<p></p>
+<table width="100%">
+<tr>
+  <td align=center colspan=3>
+    Allocate
+    <input type=text name=quant size=2 maxlength=2 value=" 1">
+    board serial number(s)
+  </td>
+</tr>
+<tr>
+  <td align=center colspan=3>
+    <input type=checkbox name=geneths checked>
+    Generate Ethernet Address(es)
+  </td>
+</tr>
+<tr>
+  <td colspan=3>
+    &nbsp;
+  </td>
+</tr>
+<tr>
+  <td align=center>
+    <input type=submit value="Register Board">
+  </td>
+  <td>
+    &nbsp;
+  </td>
+  <td align=center>
+    <input type=reset value="Reset Form Contents">
+  </td>
+</tr>
+</table>
+</form>
+<?php
+	pg_foot();
+?>
diff --git a/tools/bddb/newlog.php b/tools/bddb/newlog.php
new file mode 100644
index 00000000000..5ec42ac289f
--- /dev/null
+++ b/tools/bddb/newlog.php
@@ -0,0 +1,48 @@
+<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
+<?php
+	// (C) Copyright 2001
+	// Murray Jensen <Murray.Jensen@cmst.csiro.au>
+	// CSIRO Manufacturing Science and Technology, Preston Lab
+
+	// edit page (hymod_bddb / boards)
+
+	require("defs.php");
+
+	pg_head("$bddb_label - New Log Entry");
+
+	if ($serno == 0)
+		die("serial number not specified!");
+
+	if (isset($logno))
+		die("log number must not be specified when adding!");
+?>
+<form action=donewlog.php method=POST>
+<p></p>
+<?php
+	echo "<input type=hidden name=serno value=$serno>\n";
+
+	begin_table(3);
+
+	// date date
+	print_field("date", array('date' => date("Y-m-d")));
+
+	// details text
+	print_field_multiline("details", array(), 60, 10, 'text_filter');
+
+	end_table();
+?>
+<p></p>
+<table width="100%">
+<tr>
+  <td align=center>
+    <input type=submit value="Add Log Entry">
+  </td>
+  <td align=center>
+    <input type=reset value="Reset Form Contents">
+  </td>
+</tr>
+</table>
+</form>
+<?php
+	pg_foot();
+?>
diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c
new file mode 100644
index 00000000000..548e3c3d2f3
--- /dev/null
+++ b/tools/easylogo/easylogo.c
@@ -0,0 +1,422 @@
+/*
+** Easylogo TGA->header converter
+** ==============================
+** (C) 2000 by Paolo Scaffardi (arsenio@tin.it)
+** AIRVENT SAM s.p.a - RIMINI(ITALY)
+**
+** This is still under construction!
+*/
+
+#include <stdio.h>
+
+#pragma pack(1)
+
+/*#define ENABLE_ASCII_BANNERS */
+
+typedef struct {
+	unsigned char	id;
+	unsigned char	ColorMapType;
+	unsigned char	ImageTypeCode;
+	unsigned short	ColorMapOrigin;
+	unsigned short	ColorMapLenght;
+	unsigned char	ColorMapEntrySize;
+	unsigned short	ImageXOrigin;
+	unsigned short	ImageYOrigin;
+	unsigned short	ImageWidth;
+	unsigned short	ImageHeight;
+	unsigned char	ImagePixelSize;
+	unsigned char	ImageDescriptorByte;
+} tga_header_t;
+
+typedef struct {
+	unsigned char r,g,b ;
+} rgb_t ;
+
+typedef struct {
+	unsigned char b,g,r ;
+} bgr_t ;
+
+typedef struct {
+	unsigned char 	Cb,y1,Cr,y2;
+} yuyv_t ;
+
+typedef struct {
+	unsigned char	*data,
+					*palette ;
+	int				width,
+					height,
+					pixels,
+					bpp,
+					pixel_size,
+					size,
+					palette_size,
+					yuyv;
+} image_t ;
+
+void StringUpperCase (char *str)
+{
+    int count = strlen(str);
+    char c ;
+
+    while(count--)
+    {
+	c=*str;
+	if ((c >= 'a')&&(c<='z'))
+	    *str = 'A' + (c-'a');
+	str++ ;
+    }
+}
+
+void StringLowerCase (char *str)
+{
+    int count = strlen(str);
+    char c ;
+
+    while(count--)
+    {
+	c=*str;
+	if ((c >= 'A')&&(c<='Z'))
+	    *str = 'a' + (c-'A');
+	str++ ;
+    }
+}
+void pixel_rgb_to_yuyv (rgb_t *rgb_pixel, yuyv_t *yuyv_pixel)
+{
+    unsigned int pR, pG, pB ;
+
+    /* Transform (0-255) components to (0-100) */
+    pR = rgb_pixel->r * 100 / 255 ;
+    pG = rgb_pixel->g * 100 / 255 ;
+    pB = rgb_pixel->b * 100 / 255 ;
+
+    /* Calculate YUV values (0-255) from RGB beetween 0-100 */
+    yuyv_pixel->y1 = yuyv_pixel->y2 	= 209 * (pR + pG + pB) / 300 + 16  ;
+    yuyv_pixel->Cb 			= pB - (pR/4)   - (pG*3/4)   + 128 ;
+    yuyv_pixel->Cr 			= pR - (pG*3/4) - (pB/4)     + 128 ;
+
+    return ;
+}
+
+void printlogo_rgb (rgb_t	*data, int w, int h)
+{
+    int x,y;
+    for (y=0; y<h; y++)
+    {
+	for (x=0; x<w; x++, data++)
+	    if ((data->r < 30)/*&&(data->g == 0)&&(data->b == 0)*/)
+		printf(" ");
+	    else
+		printf("X");
+        printf("\n");
+    }
+}
+
+void printlogo_yuyv (unsigned short *data, int w, int h)
+{
+    int x,y;
+    for (y=0; y<h; y++)
+    {
+	for (x=0; x<w; x++, data++)
+	    if (*data == 0x1080)    /* Because of inverted on i386! */
+		printf(" ");
+	    else
+		printf("X");
+        printf("\n");
+    }
+}
+
+int image_load_tga (image_t *image, char *filename)
+{
+    FILE *file ;
+    tga_header_t header ;
+    int i;
+    unsigned char app ;
+    rgb_t *p ;
+
+    if( ( file = fopen( filename, "rb" ) ) == NULL )
+    	return -1;
+
+    fread(&header, sizeof(header), 1, file);
+
+    image->width 	= header.ImageWidth ;
+    image->height 	= header.ImageHeight ;
+
+    switch (header.ImageTypeCode){
+	case 2:	/* Uncompressed RGB */
+			image->yuyv = 0 ;
+			image->palette_size = 0 ;
+			image->palette = NULL ;
+    	    break;
+
+	default:
+	    printf("Format not supported!\n");
+	    return -1 ;
+    }
+
+    image->bpp  		= header.ImagePixelSize ;
+    image->pixel_size 		= ((image->bpp-1) / 8) + 1 ;
+    image->pixels 		= image->width * image->height;
+    image->size 		= image->pixels * image->pixel_size ;
+    image->data 		= malloc(image->size) ;
+
+    if (image->bpp != 24)
+    {
+	printf("Bpp not supported: %d!\n", image->bpp);
+	return -1 ;
+    }
+
+    fread(image->data, image->size, 1, file);
+
+/* Swapping R and B values */
+
+    p = image->data ;
+    for(i=0; i < image->pixels; i++, p++)
+    {
+	app = p->r ;
+	p->r = p->b ;
+	p->b = app ;
+    }
+
+/* Swapping image */
+
+    if(!(header.ImageDescriptorByte & 0x20))
+    {
+    	unsigned char *temp = malloc(image->size);
+    	int linesize = image->pixel_size * image->width ;
+	void	*dest = image->data,
+		*source = temp + image->size - linesize ;
+
+        printf("S");
+	if (temp == NULL)
+	{
+	    printf("Cannot alloc temp buffer!\n");
+	    return -1;
+	}
+
+    	memcpy(temp, image->data, image->size);
+	for(i = 0; i<image->height; i++, dest+=linesize, source-=linesize)
+	    memcpy(dest, source, linesize);
+
+	free( temp );
+    }
+
+#ifdef ENABLE_ASCII_BANNERS
+    printlogo_rgb (image->data,image->width, image->height);
+#endif
+
+    fclose (file);
+    return 0;
+}
+
+int image_free (image_t *image)
+{
+    if(image->data != NULL)
+		free(image->data);
+
+    if(image->palette != NULL)
+		free(image->palette);
+
+	return 0;
+}
+
+int image_rgb_to_yuyv (image_t *rgb_image, image_t *yuyv_image)
+{
+	rgb_t	*rgb_ptr = (rgb_t *) rgb_image->data ;
+	yuyv_t	yuyv ;
+	unsigned short *dest ;
+	int	count = 0 ;
+
+	yuyv_image->pixel_size 		= 2 ;
+	yuyv_image->bpp			= 16 ;
+	yuyv_image->yuyv		= 1 ;
+	yuyv_image->width		= rgb_image->width ;
+	yuyv_image->height		= rgb_image->height ;
+	yuyv_image->pixels 		= yuyv_image->width * yuyv_image->height ;
+	yuyv_image->size 		= yuyv_image->pixels * yuyv_image->pixel_size ;
+	dest = (unsigned short *) (yuyv_image->data	= malloc(yuyv_image->size)) ;
+	yuyv_image->palette		= 0 ;
+	yuyv_image->palette_size= 0 ;
+
+	while((count++) < rgb_image->pixels)
+	{
+		pixel_rgb_to_yuyv (rgb_ptr++, &yuyv);
+
+		if ((count & 1)==0)	/* Was == 0 */
+	    	    memcpy (dest, ((void *)&yuyv) + 2, sizeof(short));
+		else
+		    memcpy (dest, (void *)&yuyv, sizeof(short));
+
+		dest ++ ;
+	}
+
+#ifdef ENABLE_ASCII_BANNERS
+	printlogo_yuyv (yuyv_image->data, yuyv_image->width, yuyv_image->height);
+#endif
+	return 0 ;
+}
+
+int image_save_header (image_t *image, char *filename, char *varname)
+{
+	FILE    *file = fopen (filename, "w");
+	char	app[256], str[256]="", def_name[64] ;
+	int 	count = image->size, col=0;
+	unsigned char *dataptr = image->data ;
+	if (file==NULL)
+		return -1 ;
+
+/*  Author informations */
+	fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n/*\n"); */
+	fprintf(file, " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n", varname);
+	fprintf(file, " * Where:\t'screen'\tis the pointer to the frame buffer\n");
+	fprintf(file, " *\t\t'width'\tis the screen width\n");
+	fprintf(file, " *\t\t'x'\t\tis the horizontal position\n");
+	fprintf(file, " *\t\t'y'\t\tis the vertical position\n */\n\n");
+
+/*	Headers */
+	fprintf(file, "#include <video_easylogo.h>\n\n");
+/*	Macros */
+	strcpy(def_name, varname);
+	StringUpperCase (def_name);
+	fprintf(file, "#define	DEF_%s_WIDTH\t\t%d\n", def_name, image->width);
+	fprintf(file, "#define	DEF_%s_HEIGHT\t\t%d\n", def_name, image->height);
+	fprintf(file, "#define	DEF_%s_PIXELS\t\t%d\n", def_name, image->pixels);
+	fprintf(file, "#define	DEF_%s_BPP\t\t%d\n", def_name, image->bpp);
+	fprintf(file, "#define	DEF_%s_PIXEL_SIZE\t%d\n", def_name, image->pixel_size);
+	fprintf(file, "#define	DEF_%s_SIZE\t\t%d\n\n", def_name, image->size);
+/*  Declaration */
+	fprintf(file, "unsigned char DEF_%s_DATA[DEF_%s_SIZE] = {\n", def_name, def_name);
+
+/*	Data */
+	while(count)
+		switch (col){
+			case 0:
+				sprintf(str, " 0x%02x", *dataptr++);
+				col++;
+				count-- ;
+				break;
+
+			case 16:
+				fprintf(file, "%s", str);
+				if (count > 0)
+				    fprintf(file,",");
+				fprintf(file, "\n");
+
+				col = 0 ;
+				break;
+
+			default:
+				strcpy(app, str);
+				sprintf(str, "%s, 0x%02x", app, *dataptr++);
+				col++ ;
+				count-- ;
+				break;
+		}
+
+	if (col)
+		fprintf(file, "%s\n", str);
+
+/* 	End of declaration */
+	fprintf(file, "};\n\n");
+/*	Variable */
+	fprintf(file, "fastimage_t %s = {\n", varname);
+	fprintf(file, "		DEF_%s_DATA,\n", def_name);
+	fprintf(file, "		DEF_%s_WIDTH,\n", def_name);
+	fprintf(file, "		DEF_%s_HEIGHT,\n", def_name);
+	fprintf(file, "		DEF_%s_BPP,\n", def_name);
+	fprintf(file, "		DEF_%s_PIXEL_SIZE,\n", def_name);
+	fprintf(file, "		DEF_%s_SIZE\n};\n", def_name);
+
+	fclose (file);
+
+	return 0 ;
+}
+
+#define DEF_FILELEN	256
+
+int main (int argc, char *argv[])
+{
+    char
+	inputfile[DEF_FILELEN],
+	outputfile[DEF_FILELEN],
+	varname[DEF_FILELEN];
+
+    image_t 		rgb_logo, yuyv_logo ;
+
+    switch (argc){
+    case 2:
+    case 3:
+    case 4:
+        strcpy (inputfile, 	argv[1]);
+
+	if (argc > 2)
+	    strcpy (varname, 	argv[2]);
+	else
+	{
+	    int pos = strchr(inputfile, '.');
+
+	    if (pos >= 0)
+	    {
+		strncpy (varname, inputfile, pos);
+		varname[pos] = 0 ;
+	    }
+	}
+
+	if (argc > 3)
+	    strcpy (outputfile, argv[3]);
+	else
+	{
+	    int pos = strchr (varname, '.');
+
+	    if (pos > 0)
+	    {
+		char app[DEF_FILELEN] ;
+
+		strncpy(app, varname, pos);
+		sprintf(outputfile, "%s.h", app);
+	    }
+	}
+        break;
+
+    default:
+        printf("EasyLogo 1.0 (C) 2000 by Paolo Scaffardi\n\n");
+
+        printf("Syntax:	easylogo inputfile [outputvar {outputfile}] \n");
+        printf("\n");
+        printf("Where:	'inputfile' 	is the TGA image to load\n");
+	printf("      	'outputvar' 	is the variable name to create\n");
+	printf("       	'outputfile' 	is the output header file (default is 'inputfile.h')\n");
+
+	return -1 ;
+    }
+
+    printf("Doing '%s' (%s) from '%s'...",
+	outputfile, varname, inputfile);
+
+/* Import TGA logo */
+
+    printf("L");
+    if (image_load_tga (&rgb_logo, inputfile)<0)
+    {
+	printf("input file not found!\n");
+    	exit(1);
+    }
+
+/* Convert it to YUYV format */
+
+    printf("C");
+    image_rgb_to_yuyv (&rgb_logo, &yuyv_logo) ;
+
+/* Save it into a header format */
+
+    printf("S");
+    image_save_header (&yuyv_logo, outputfile, varname) ;
+
+/* Free original image and copy */
+
+    image_free (&rgb_logo);
+    image_free (&yuyv_logo);
+
+    printf("\n");
+
+    return 0 ;
+}