Add support for TQM885D board.

Patch by Martin Krause, 20 Mar 2006

Signed-off-by: Martin Krause <martin.krause@tqs.de>

10 files changed, 528 insertions, 15 deletions

diff --git a/MAKEALL b/MAKEALL
index 4de01580937..1adc443c88b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -53,6 +53,7 @@ LIST_8xx="	\
 	FPS850L		lwmon		QS860T		TQM850L		\
 	GEN860T		MBX		quantum		TQM855L		\
 	GEN860T_SC					TQM860L		\
+							TQM885D		\
 							uc100		\
 							v37		\
 "
diff --git a/Makefile b/Makefile
index efc5925ad88..63f21757678 100644
--- a/Makefile
+++ b/Makefile
@@ -745,6 +745,7 @@ TQM855M_config		\
 TQM860M_config		\
 TQM862M_config		\
 TQM866M_config		\
+TQM885D_config		\
 virtlab2_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring _LCD,$@)" ] || \
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index ab57ee5c619..db0a7e5eb86 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -33,12 +33,13 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
 # ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
 #  define CFG_OR_TIMING_FLASH_AT_50MHZ	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 					 OR_SCY_2_CLK | OR_EHTR | OR_BI)
 # endif
-#endif /* CONFIG_TQM8xxL/M, !TQM866M */
+#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
 
 #ifndef	CFG_ENV_ADDR
 #define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index b292231c969..06c84f7cf7b 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -119,6 +119,10 @@ int checkboard (void)
 		gd->board_type = 'M';
 	}
 
+	if ((*(s + 6) == 'D')) {	/* a TQM885D type */
+		gd->board_type = 'D';
+	}
+
 	for (; *s; ++s) {
 		if (*s == ' ')
 			break;
@@ -178,7 +182,8 @@ long int initdram (int board_type)
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
-	    (board_type != 'M') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
 		memctl->memc_or3 = CFG_OR3_PRELIM;
 		memctl->memc_br3 = CFG_BR3_PRELIM;
 	}
@@ -197,7 +202,8 @@ long int initdram (int board_type)
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
-	    (board_type != 'M') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
 		memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
 		udelay (1);
 		memctl->memc_mcr = 0x80006230;	/* SDRAM bank 1 - execute twice */
@@ -255,7 +261,8 @@ long int initdram (int board_type)
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
-	    (board_type != 'M') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
 		/*
 		 * Check Bank 1 Memory Size
 		 * use current column settings
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 9ebee592d8c..6d2755e8304 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -510,8 +510,6 @@ static void fec_pin_init(int fecidx)
 #if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
 
 #if !defined(CONFIG_RMII)
-
-#warning this configuration is not tested; please report if it works
 		immr->im_cpm.cp_pepar     |=  0x0003fffc;
 		immr->im_cpm.cp_pedir     |=  0x0003fffc;
 		immr->im_cpm.cp_peso      &= ~0x000087fc;
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 57f91c0aa04..101d5f9cb35 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -259,7 +259,11 @@ int get_clocks_866 (void)
 	 */
 	sccr_reg = immr->im_clkrst.car_sccr;
 	sccr_reg &= ~SCCR_EBDF11;
+#if defined(CONFIG_TQM885D)
+	if (gd->cpu_clk <= 80000000) {
+#else
 	if (gd->cpu_clk <= 66000000) {
+#endif
 		sccr_reg |= SCCR_EBDF00;	/* bus division factor = 1 */
 		gd->bus_clk = gd->cpu_clk;
 	} else {
@@ -360,7 +364,8 @@ static long init_pll_866 (long clk)
 
 #endif /* CONFIG_8xx_CPUCLK_DEFAULT */
 
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
 /*
  * Adjust sdram refresh rate to actual CPU clock
  * and set timebase source according to actual CPU clock
@@ -384,6 +389,6 @@ int adjust_sdram_tbs_8xx (void)
 
 	return (0);
 }
-#endif /* CONFIG_TQM8xxL/M, !TQM866M */
+#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
 
 /* ------------------------------------------------------------------------- */
diff --git a/include/common.h b/include/common.h
index 6d7c41ad2b6..e4637ad356a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -116,12 +116,13 @@ typedef void (interrupt_handler_t)(void *);
 
 /*
  * enable common handling for all TQM8xxL/M boards:
- * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
+ * - CONFIG_TQM8xxM will be defined for all TQM8xxM and TQM885D boards
  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  */
 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
-    defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
+    defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) || \
+    defined(CONFIG_TQM885D)
 # ifndef CONFIG_TQM8xxM
 #  define CONFIG_TQM8xxM
 # endif
diff --git a/include/commproc.h b/include/commproc.h
index 061468e752d..12400e3eddb 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1405,15 +1405,16 @@ typedef struct scc_enet {
 
 #endif	/* CONFIG_SXNI855T */
 
-/***  MVS1, TQM823L/M, TQM850L/M, ETX094, R360MPI  *******************/
+/***  MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI  **********/
 
 #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
     defined(CONFIG_R360MPI) || defined(CONFIG_RBC823)  || \
     defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
     defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
-    defined(CONFIG_ETX094)  || defined(CONFIG_RRVISION)|| \
-    defined(CONFIG_VIRTLAB2)||				  \
+    defined(CONFIG_TQM885D) || defined(CONFIG_ETX094)  || \
+    defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \
    (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
+
 /* Bits in parallel I/O port registers that have to be set/cleared
  * to configure the pins for SCC2 use.
  */
@@ -1438,6 +1439,11 @@ typedef struct scc_enet {
  */
 #define SICR_ENET_MASK	((uint)0x0000ff00)
 #define SICR_ENET_CLKRT	((uint)0x00002600)
+
+# ifdef CONFIG_FEC_ENET		/* Use FEC for Fast Ethernet */
+#define FEC_ENET
+# endif	/* CONFIG_FEC_ENET */
+
 #endif	/* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */
 
 /***  TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M  *********************/
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
new file mode 100644
index 00000000000..ede4e3b9b34
--- /dev/null
+++ b/include/configs/TQM885D.h
@@ -0,0 +1,492 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2006
+ * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
+#define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
+
+#define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
+#define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
+#define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
+#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  50 MHz - CPU default clock	*/
+						/* (it will be used if there is no	*/
+						/* 'cpuclk' variable with valid value)	*/
+
+#define CFG_MEASURE_CPUCLK			/* Measure real cpu clock	*/
+						/* (function measure_gclk()	*/
+						/* will be called)		*/
+#ifdef CFG_MEASURE_CPUCLK
+#define CFG_8XX_XIN		10000000	/* measure_gclk() needs this	*/
+#endif
+
+#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/TQM866M/uImage\0"				\
+	"kernel_addr=40080000\0"					\
+	"ramdisk_addr=40180000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+
+#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CFG_I2C_SLAVE		0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL		0x00000020	/* PB 26 */
+#define PB_SDA		0x00000010	/* PB 27 */
+
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else	immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
+#endif	/* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+
+# define CONFIG_RTC_DS1337 1
+# define CFG_I2C_RTC_ADDR 0x68
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
+
+#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PING )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#if 0
+#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#endif
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
+#define CFG_ALT_MEMTEST				/* alternate, more extensive
+						   memory test.*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#else	/* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing: Default value of OR0 after reset
+ */
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
+				 OR_SCY_6_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
+#define SDRAM_MAX_SIZE		(256 << 20)	/* max 256 MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
+#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+					BR_PS_8 | BR_MS_UPMB | BR_V )
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*
+ * 4096	Rows from SDRAM example configuration
+ * 1000	factor s -> ms
+ * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4	Number of refresh cycles per period
+ * 64	Refresh cycle in ms per number of rows
+ */
+#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+
+/*
+ * Memory Periodic Timer Prescaler
+ * Periodic timer for refresh, start with refresh rate for 40 MHz clock
+ * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
+ */
+#define CFG_MAMR_PTA		39
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 10 column SDRAM */
+#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/*
+ * Network configuration
+ */
+#define CONFIG_SCC2_ENET		/* enable ethernet on SCC2 */
+#define CONFIG_FEC_ENET			/* enable ethernet on FEC */
+#define CONFIG_ETHER_ON_FEC1		/* ... for FEC1 */
+#define CONFIG_ETHER_ON_FEC2		/* ... for FEC2 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+#define CFG_DISCOVER_PHY
+#endif
+
+#define CONFIG_NET_RETRY_COUNT 1	/* reduce max. timeout before
+					   switching to another netwok (if the
+					   tried network is unreachable) */
+
+#define CONFIG_ETHPRIME		"SCC ETHERNET"
+
+#endif	/* __CONFIG_H */
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index dbb752e84f3..db80f775603 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -270,7 +270,8 @@ init_fnc_t *init_sequence[] = {
 
 #if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
 	get_clocks,		/* get CPU and bus clocks (etc.) */
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
 	adjust_sdram_tbs_8xx,
 #endif
 	init_timebase,