nios: remove nios-32 arch

The nios-32 arch is obsolete and broken. So it is removed.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

94 files changed, 4 insertions, 12143 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 5cbc8456394..7a13d28df94 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -842,22 +842,6 @@ Stefan Roese <sr@denx.de>
 	vct_xxx		MIPS32 4Kc
 
 #########################################################################
-# Nios-32 Systems:							#
-#									#
-# Maintainer Name, Email Address					#
-#	Board		CPU						#
-#########################################################################
-
-Stephan Linz <linz@li-pro.net>
-
-	DK1S10		Nios-32
-	ADNPESC1	Nios-32
-
-Scott McNutt <smcnutt@psyent.com>
-
-	DK1C20		Nios-32
-
-#########################################################################
 # Nios-II Systems:							#
 #									#
 # Maintainer Name, Email Address					#
diff --git a/MAKEALL b/MAKEALL
index bb09627e33f..25273522b70 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -811,21 +811,6 @@ LIST_x86="		\
 "
 
 #########################################################################
-## NIOS Systems
-#########################################################################
-
-LIST_nios="			\
-	ADNPESC1		\
-	ADNPESC1_base_32	\
-	ADNPESC1_DNPEVA2_base_32\
-	DK1C20			\
-	DK1C20_standard_32	\
-	DK1S10			\
-	DK1S10_standard_32	\
-	DK1S10_mtx_ldk_20	\
-"
-
-#########################################################################
 ## Nios-II Systems
 #########################################################################
 
@@ -1017,7 +1002,7 @@ do
 	|coldfire \
 	|microblaze \
 	|mips|mips_el \
-	|nios|nios2 \
+	|nios2 \
 	|ppc|powerpc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
 	|sh|sh2|sh3|sh4 \
 	|sparc \
diff --git a/Makefile b/Makefile
index 686e6fbeb05..c26e491fb0a 100644
--- a/Makefile
+++ b/Makefile
@@ -3462,68 +3462,6 @@ purple_config :		unconfig
 #========================================================================
 # Nios
 #========================================================================
-#########################################################################
-## Nios32
-#########################################################################
-
-ADNPESC1_DNPEVA2_base_32_config	\
-ADNPESC1_base_32_config		\
-ADNPESC1_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _DNPEVA2,$@)" ] || \
-		{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... DNP/EVA2 configuration" ; \
-		}
-	@[ -z "$(findstring _base_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'base_32' configuration" ; \
-		}
-	@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
-
-DK1C20_safe_32_config		\
-DK1C20_standard_32_config	\
-DK1C20_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _safe_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'safe_32' configuration" ; \
-		}
-	@[ -z "$(findstring _standard_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration" ; \
-		}
-	@[ -z "$(findstring DK1C20_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
-
-DK1S10_safe_32_config		\
-DK1S10_standard_32_config	\
-DK1S10_mtx_ldk_20_config	\
-DK1S10_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _safe_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'safe_32' configuration" ; \
-		}
-	@[ -z "$(findstring _standard_32,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration" ; \
-		}
-	@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
-		}
-	@[ -z "$(findstring DK1S10_config,$@)" ] || \
-		{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
-		  $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
-		}
-	@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
 
 #########################################################################
 ## Nios-II
diff --git a/README b/README
index acb3308d2b1..68f1720ec71 100644
--- a/README
+++ b/README
@@ -177,9 +177,6 @@ Directory Hierarchy:
   /mips			Files generic to MIPS architecture
     /cpu		CPU specific files
     /lib		Architecture specific library files
-  /nios			Files generic to Altera NIOS architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
   /nios2		Files generic to Altera NIOS2 architecture
     /cpu		CPU specific files
     /lib		Architecture specific library files
@@ -3337,8 +3334,8 @@ details; basically, the header defines the following image properties:
   Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
   INTEGRITY).
 * Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
-  IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
-  Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
+  IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
+  Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC).
 * Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point
diff --git a/arch/nios/config.mk b/arch/nios/config.mk
deleted file mode 100644
index e1b9f07bb30..00000000000
--- a/arch/nios/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003
-# Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CROSS_COMPILE ?= nios-elf-
-
-STANDALONE_LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32
-
-PLATFORM_CPPFLAGS += -m32 -DCONFIG_NIOS -D__NIOS__ -ffixed-g7 -gstabs
diff --git a/arch/nios/cpu/Makefile b/arch/nios/cpu/Makefile
deleted file mode 100644
index ad1745608d3..00000000000
--- a/arch/nios/cpu/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).a
-
-START	= start.o
-SOBJS	= traps.o
-COBJS	= cpu.o interrupts.o serial.o asmi.o spi.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/nios/cpu/asmi.c b/arch/nios/cpu/asmi.c
deleted file mode 100644
index 33553b7ca6d..00000000000
--- a/arch/nios/cpu/asmi.c
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_NIOS_ASMI)
-#include <command.h>
-#include <nios-io.h>
-
-#if !defined(CONFIG_SYS_NIOS_ASMIBASE)
-#error "*** CONFIG_SYS_NIOS_ASMIBASE not defined ***"
-#endif
-
-/*-----------------------------------------------------------------------*/
-#define SHORT_HELP\
-	"asmi    - read/write Cyclone ASMI configuration device.\n"
-
-#define LONG_HELP\
-	"\n"\
-	"asmi erase start [end]\n"\
-	"    - erase sector start or sectors start through end.\n"\
-	"asmi info\n"\
-	"    - display ASMI device information.\n"\
-	"asmi protect on | off\n"\
-	"    - turn device protection on or off.\n"\
-	"asmi read addr offset count\n"\
-	"    - read count bytes from offset to addr.\n"\
-	"asmi write addr offset count\n"\
-	"    - write count bytes to offset from addr.\n"\
-	"asmi verify addr offset count\n"\
-	"    - verify count bytes at offset from addr."
-
-
-/*-----------------------------------------------------------------------*/
-/* Operation codes for serial configuration devices
- */
-#define ASMI_WRITE_ENA		0x06	/* Write enable */
-#define ASMI_WRITE_DIS		0x04	/* Write disable */
-#define ASMI_READ_STAT		0x05	/* Read status */
-#define ASMI_READ_BYTES		0x03	/* Read bytes */
-#define ASMI_READ_ID		0xab	/* Read silicon id */
-#define ASMI_WRITE_STAT		0x01	/* Write status */
-#define ASMI_WRITE_BYTES	0x02	/* Write bytes */
-#define ASMI_ERASE_BULK		0xc7	/* Erase entire device */
-#define ASMI_ERASE_SECT		0xd8	/* Erase sector */
-
-/* Device status register bits
- */
-#define ASMI_STATUS_WIP		(1<<0)	/* Write in progress */
-#define ASMI_STATUS_WEL		(1<<1)	/* Write enable latch */
-
-static nios_asmi_t *asmi = (nios_asmi_t *)CONFIG_SYS_NIOS_ASMIBASE;
-
-/***********************************************************************
- * Device access
- ***********************************************************************/
-static void asmi_cs (int assert)
-{
-	if (assert) {
-		asmi->control |= NIOS_ASMI_SSO;
-	} else {
-		/* Let all bits shift out */
-		while ((asmi->status & NIOS_ASMI_TMT) == 0)
-			;
-		asmi->control &= ~NIOS_ASMI_SSO;
-	}
-}
-
-static void asmi_tx (unsigned char c)
-{
-	while ((asmi->status & NIOS_ASMI_TRDY) == 0)
-		;
-	asmi->txdata = c;
-}
-
-static int asmi_rx (void)
-{
-	while ((asmi->status & NIOS_ASMI_RRDY) == 0)
-		;
-	return (asmi->rxdata);
-}
-
-static unsigned char bitrev[] = {
-	0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e,
-	0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f
-};
-
-static unsigned char asmi_bitrev( unsigned char c )
-{
-	unsigned char val;
-
-	val  = bitrev[c>>4];
-	val |= bitrev[c & 0x0f]<<4;
-	return (val);
-}
-
-static void asmi_rcv (unsigned char *dst, int len)
-{
-	while (len--) {
-		asmi_tx (0);
-		*dst++ = asmi_rx ();
-	}
-}
-
-static void asmi_rrcv (unsigned char *dst, int len)
-{
-	while (len--) {
-		asmi_tx (0);
-		*dst++ = asmi_bitrev (asmi_rx ());
-	}
-}
-
-static void asmi_snd (unsigned char *src, int len)
-{
-	while (len--) {
-		asmi_tx (*src++);
-		asmi_rx ();
-	}
-}
-
-static void asmi_rsnd (unsigned char *src, int len)
-{
-	while (len--) {
-		asmi_tx (asmi_bitrev (*src++));
-		asmi_rx ();
-	}
-}
-
-static void asmi_wr_enable (void)
-{
-	asmi_cs (1);
-	asmi_tx (ASMI_WRITE_ENA);
-	asmi_rx ();
-	asmi_cs (0);
-}
-
-static unsigned char asmi_status_rd (void)
-{
-	unsigned char status;
-
-	asmi_cs (1);
-	asmi_tx (ASMI_READ_STAT);
-	asmi_rx ();
-	asmi_tx (0);
-	status = asmi_rx ();
-	asmi_cs (0);
-	return (status);
-}
-
-static void asmi_status_wr (unsigned char status)
-{
-	asmi_wr_enable ();
-	asmi_cs (1);
-	asmi_tx (ASMI_WRITE_STAT);
-	asmi_rx ();
-	asmi_tx (status);
-	asmi_rx ();
-	asmi_cs (0);
-	return;
-}
-
-/***********************************************************************
- * Device information
- ***********************************************************************/
-typedef struct asmi_devinfo_t {
-	const char	*name;		/* Device name */
-	unsigned char	id;		/* Device silicon id */
-	unsigned char	size;		/* Total size log2(bytes)*/
-	unsigned char	num_sects;	/* Number of sectors */
-	unsigned char	sz_sect;	/* Sector size log2(bytes) */
-	unsigned char	sz_page;	/* Page size log2(bytes) */
-	unsigned char   prot_mask;	/* Protection mask */
-}asmi_devinfo_t;
-
-static struct asmi_devinfo_t devinfo[] = {
-	{ "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c },
-	{ "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c },
-	{ 0, 0, 0, 0, 0, 0 }
-};
-
-static asmi_devinfo_t *asmi_dev_find (void)
-{
-	unsigned char buf[4];
-	unsigned char id;
-	int i;
-	struct asmi_devinfo_t *dev = NULL;
-
-	/* Read silicon id requires 3 "dummy bytes" before it's put
-	 * on the wire.
-	 */
-	buf[0] = ASMI_READ_ID;
-	buf[1] = 0;
-	buf[2] = 0;
-	buf[3] = 0;
-
-	asmi_cs (1);
-	asmi_snd (buf,4);
-	asmi_rcv (buf,1);
-	asmi_cs (0);
-	id = buf[0];
-
-	/* Find the info struct */
-	i = 0;
-	while (devinfo[i].name) {
-		if (id == devinfo[i].id) {
-			dev = &devinfo[i];
-			break;
-		}
-		i++;
-	}
-
-	return (dev);
-}
-
-/***********************************************************************
- * Misc Utilities
- ***********************************************************************/
-static unsigned asmi_cfgsz (void)
-{
-	unsigned sz = 0;
-	unsigned char buf[128];
-	unsigned char *p;
-
-	/* Read in the first 128 bytes of the device */
-	buf[0] = ASMI_READ_BYTES;
-	buf[1] = 0;
-	buf[2] = 0;
-	buf[3] = 0;
-
-	asmi_cs (1);
-	asmi_snd (buf,4);
-	asmi_rrcv (buf, sizeof(buf));
-	asmi_cs (0);
-
-	/* Search for the starting 0x6a which is followed by the
-	 * 4-byte 'register' and 4-byte bit-count.
-	 */
-	p = buf;
-	while (p < buf + sizeof(buf)-8) {
-		if ( *p == 0x6a ) {
-			/* Point to bit count and extract */
-			p += 5;
-			sz = *p++;
-			sz |= *p++ << 8;
-			sz |= *p++ << 16;
-			sz |= *p++ << 24;
-			/* Convert to byte count */
-			sz += 7;
-			sz >>= 3;
-		} else if (*p == 0xff) {
-			/* 0xff is ok ... just skip */
-			p++;
-			continue;
-		} else {
-			/* Not 0xff or 0x6a ... something's not
-			 * right ... report 'unknown' (sz=0).
-			 */
-			break;
-		}
-	}
-	return (sz);
-}
-
-static int asmi_erase (unsigned start, unsigned end)
-{
-	unsigned off, sectsz;
-	unsigned char buf[4];
-	struct asmi_devinfo_t *dev = asmi_dev_find ();
-
-	if (!dev || (start>end))
-		return (-1);
-
-	/* Erase the requested sectors. An address is required
-	 * that lies within the requested sector -- we'll just
-	 * use the first address in the sector.
-	 */
-	printf ("asmi erasing sector %d ", start);
-	if (start != end)
-		printf ("to %d ", end);
-	sectsz = (1 << dev->sz_sect);
-	while (start <= end) {
-		off = start * sectsz;
-		start++;
-
-		buf[0] = ASMI_ERASE_SECT;
-		buf[1] = off >> 16;
-		buf[2] = off >> 8;
-		buf[3] = off;
-
-		asmi_wr_enable ();
-		asmi_cs (1);
-		asmi_snd (buf,4);
-		asmi_cs (0);
-
-		printf ("."); /* Some user feedback */
-
-		/* Wait for erase to complete */
-		while (asmi_status_rd() & ASMI_STATUS_WIP)
-			;
-	}
-	printf (" done.\n");
-	return (0);
-}
-
-static int asmi_read (ulong addr, ulong off, ulong cnt)
-{
-	unsigned char buf[4];
-
-	buf[0] = ASMI_READ_BYTES;
-	buf[1] = off >> 16;
-	buf[2] = off >> 8;
-	buf[3] = off;
-
-	asmi_cs (1);
-	asmi_snd (buf,4);
-	asmi_rrcv ((unsigned char *)addr, cnt);
-	asmi_cs (0);
-
-	return (0);
-}
-
-static
-int asmi_write (ulong addr, ulong off, ulong cnt)
-{
-	ulong wrcnt;
-	unsigned pgsz;
-	unsigned char buf[4];
-	struct asmi_devinfo_t *dev = asmi_dev_find ();
-
-	if (!dev)
-		return (-1);
-
-	pgsz = (1<<dev->sz_page);
-	while (cnt) {
-		if (off % pgsz)
-			wrcnt = pgsz - (off % pgsz);
-		else
-			wrcnt = pgsz;
-		wrcnt = (wrcnt > cnt) ? cnt : wrcnt;
-
-		buf[0] = ASMI_WRITE_BYTES;
-		buf[1] = off >> 16;
-		buf[2] = off >> 8;
-		buf[3] = off;
-
-		asmi_wr_enable ();
-		asmi_cs (1);
-		asmi_snd (buf,4);
-		asmi_rsnd ((unsigned char *)addr, wrcnt);
-		asmi_cs (0);
-
-		/* Wait for write to complete */
-		while (asmi_status_rd() & ASMI_STATUS_WIP)
-			;
-
-		cnt -= wrcnt;
-		off += wrcnt;
-		addr += wrcnt;
-	}
-
-	return (0);
-}
-
-static
-int asmi_verify (ulong addr, ulong off, ulong cnt, ulong *err)
-{
-	ulong rdcnt;
-	unsigned char buf[256];
-	unsigned char *start,*end;
-	int i;
-
-	start = end = (unsigned char *)addr;
-	while (cnt) {
-		rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt;
-		asmi_read ((ulong)buf, off, rdcnt);
-		for (i=0; i<rdcnt; i++) {
-			if (*end != buf[i]) {
-				*err = end - start;
-				return(-1);
-			}
-			end++;
-		}
-		cnt -= rdcnt;
-		off += rdcnt;
-	}
-	return (0);
-}
-
-static int asmi_sect_erased (int sect, unsigned *offset,
-		struct asmi_devinfo_t *dev)
-{
-	unsigned char buf[128];
-	unsigned off, end;
-	unsigned sectsz;
-	int i;
-
-	sectsz = (1 << dev->sz_sect);
-	off = sectsz * sect;
-	end = off + sectsz;
-
-	while (off < end) {
-		asmi_read ((ulong)buf, off, sizeof(buf));
-		for (i=0; i < sizeof(buf); i++) {
-			if (buf[i] != 0xff) {
-				*offset = off + i;
-				return (0);
-			}
-		}
-		off += sizeof(buf);
-	}
-	return (1);
-}
-
-
-/***********************************************************************
- * Commands
- ***********************************************************************/
-static
-void do_asmi_info (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
-	int i;
-	unsigned char stat;
-	unsigned tmp;
-	int erased;
-
-	/* Basic device info */
-	printf ("%s: %d kbytes (%d sectors x %d kbytes,"
-		" %d bytes/page)\n",
-		dev->name, 1 << (dev->size-10),
-		dev->num_sects, 1 << (dev->sz_sect-10),
-		1 << dev->sz_page );
-
-	/* Status -- for now protection is all-or-nothing */
-	stat = asmi_status_rd();
-	printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n",
-		stat,
-		(stat & ASMI_STATUS_WIP) ? 1 : 0,
-	        (stat & ASMI_STATUS_WEL) ? 1 : 0,
-		(stat & dev->prot_mask) ? "on" : "off" );
-
-	/* Configuration  */
-	tmp = asmi_cfgsz ();
-	if (tmp) {
-		printf ("config: 0x%06x (%d) bytes\n", tmp, tmp );
-	} else {
-		printf ("config: unknown\n" );
-	}
-
-	/* Sector info */
-	for (i=0; i<dev->num_sects; i++) {
-		erased = asmi_sect_erased (i, &tmp, dev);
-		printf ("     %d: %06x ",
-			i, i*(1<<dev->sz_sect) );
-		if (erased)
-			printf ("erased\n");
-		else
-			printf ("data @ 0x%06x\n", tmp);
-	}
-
-	return;
-}
-
-static
-void do_asmi_erase (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
-	unsigned start,end;
-
-	if ((argc < 3) || (argc > 4)) {
-		printf ("USAGE: asmi erase sect [end]\n");
-		return;
-	}
-	if ((asmi_status_rd() & dev->prot_mask) != 0) {
-		printf ( "asmi: device protected.\n");
-		return;
-	}
-
-	start = simple_strtoul (argv[2], NULL, 10);
-	if (argc > 3)
-		end = simple_strtoul (argv[3], NULL, 10);
-	else
-		end = start;
-	if ((start >= dev->num_sects) || (start > end)) {
-		printf ("asmi: invalid sector range: [%d:%d]\n",
-			start, end );
-		return;
-	}
-
-	asmi_erase (start, end);
-
-	return;
-}
-
-static
-void do_asmi_protect (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
-	unsigned char stat;
-
-	/* For now protection is all-or-nothing to keep things
-	 * simple. The protection bits don't map in a linear
-	 * fashion ... and we would rather protect the bottom
-	 * of the device since it contains the config data and
-	 * leave the top unprotected for app use. But unfortunately
-	 * protection works from top-to-bottom so it does
-	 * really help very much from a software app point-of-view.
-	 */
-	if (argc < 3) {
-		printf ("USAGE: asmi protect on | off\n");
-		return;
-	}
-	if (!dev)
-		return;
-
-	/* Protection on/off is just a matter of setting/clearing
-	 * all protection bits in the status register.
-	 */
-	stat = asmi_status_rd ();
-	if (strcmp ("on", argv[2]) == 0) {
-		stat |= dev->prot_mask;
-	} else if (strcmp ("off", argv[2]) == 0 ) {
-		stat &= ~dev->prot_mask;
-	} else {
-		printf ("asmi: unknown protection: %s\n", argv[2]);
-		return;
-	}
-	asmi_status_wr (stat);
-	return;
-}
-
-static
-void do_asmi_read (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
-	ulong addr,off,cnt;
-	ulong sz;
-
-	if (argc < 5) {
-		printf ("USAGE: asmi read addr offset count\n");
-		return;
-	}
-
-	sz = 1 << dev->size;
-	addr = simple_strtoul (argv[2], NULL, 16);
-	off  = simple_strtoul (argv[3], NULL, 16);
-	cnt  = simple_strtoul (argv[4], NULL, 16);
-	if (off > sz) {
-		printf ("offset is greater than device size"
-			"... aborting.\n");
-		return;
-	}
-	if ((off + cnt) > sz) {
-		printf ("request exceeds device size"
-			"... truncating.\n");
-		cnt = sz - off;
-	}
-	printf ("asmi: read %08lx <- %06lx (0x%lx bytes)\n",
-			addr, off, cnt);
-	asmi_read (addr, off, cnt);
-
-	return;
-}
-
-static
-void do_asmi_write (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
-	ulong addr,off,cnt;
-	ulong sz;
-	ulong err;
-
-	if (argc < 5) {
-		printf ("USAGE: asmi write addr offset count\n");
-		return;
-	}
-	if ((asmi_status_rd() & dev->prot_mask) != 0) {
-		printf ( "asmi: device protected.\n");
-		return;
-	}
-
-	sz = 1 << dev->size;
-	addr = simple_strtoul (argv[2], NULL, 16);
-	off  = simple_strtoul (argv[3], NULL, 16);
-	cnt  = simple_strtoul (argv[4], NULL, 16);
-	if (off > sz) {
-		printf ("offset is greater than device size"
-			"... aborting.\n");
-		return;
-	}
-	if ((off + cnt) > sz) {
-		printf ("request exceeds device size"
-			"... truncating.\n");
-		cnt = sz - off;
-	}
-	printf ("asmi: write %08lx -> %06lx (0x%lx bytes)\n",
-			addr, off, cnt);
-	asmi_write (addr, off, cnt);
-	if (asmi_verify (addr, off, cnt, &err) != 0)
-		printf ("asmi: write error at offset %06lx\n", err);
-
-	return;
-}
-
-static
-void do_asmi_verify (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
-	ulong addr,off,cnt;
-	ulong sz;
-	ulong err;
-
-	if (argc < 5) {
-		printf ("USAGE: asmi verify addr offset count\n");
-		return;
-	}
-
-	sz = 1 << dev->size;
-	addr = simple_strtoul (argv[2], NULL, 16);
-	off  = simple_strtoul (argv[3], NULL, 16);
-	cnt  = simple_strtoul (argv[4], NULL, 16);
-	if (off > sz) {
-		printf ("offset is greater than device size"
-			"... aborting.\n");
-		return;
-	}
-	if ((off + cnt) > sz) {
-		printf ("request exceeds device size"
-			"... truncating.\n");
-		cnt = sz - off;
-	}
-	printf ("asmi: verify %08lx -> %06lx (0x%lx bytes)\n",
-			addr, off, cnt);
-	if (asmi_verify (addr, off, cnt, &err) != 0)
-		printf ("asmi: verify error at offset %06lx\n", err);
-
-	return;
-}
-
-/*-----------------------------------------------------------------------*/
-int do_asmi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	int len;
-	struct asmi_devinfo_t *dev = asmi_dev_find ();
-
-	if (argc < 2) {
-		printf ("Usage:%s", LONG_HELP);
-		return (0);
-	}
-
-	if (!dev) {
-		printf ("asmi: device not found.\n");
-		return (0);
-	}
-
-	len = strlen (argv[1]);
-	if (strncmp ("info", argv[1], len) == 0) {
-		do_asmi_info ( dev, argc, argv);
-	} else if (strncmp ("erase", argv[1], len) == 0) {
-		do_asmi_erase (dev, argc, argv);
-	} else if (strncmp ("protect", argv[1], len) == 0) {
-		do_asmi_protect (dev, argc, argv);
-	} else if (strncmp ("read", argv[1], len) == 0) {
-		do_asmi_read (dev, argc, argv);
-	} else if (strncmp ("write", argv[1], len) == 0) {
-		do_asmi_write (dev, argc, argv);
-	} else if (strncmp ("verify", argv[1], len) == 0) {
-		do_asmi_verify (dev, argc, argv);
-	} else {
-		printf ("asmi: unknown operation: %s\n", argv[1]);
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------*/
-
-
-U_BOOT_CMD( asmi, 5, 0, do_asmi, SHORT_HELP, LONG_HELP );
-
-#endif /* CONFIG_NIOS_ASMI */
diff --git a/arch/nios/cpu/config.mk b/arch/nios/cpu/config.mk
deleted file mode 100644
index f228d7219a4..00000000000
--- a/arch/nios/cpu/config.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS +=
diff --git a/arch/nios/cpu/cpu.c b/arch/nios/cpu/cpu.c
deleted file mode 100644
index 5519e827804..00000000000
--- a/arch/nios/cpu/cpu.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nios.h>
-
-
-int checkcpu (void)
-{
-	unsigned val;
-	unsigned rev_major;
-	unsigned rev_minor;
-	short nregs, hi_limit, lo_limit;
-
-	/* Get cpu version info */
-	val = rdctl (CTL_CPU_ID);
-	puts ("CPU:   ");
-	printf ("%s", (val & 0x00008000) ? "Nios-16 " : "Nios-32 ");
-	rev_major = (val>>12) & 0x07;
-	rev_minor = (val>>4) & 0x0ff;
-	printf ("Rev. %d.%d (0x%04x)", rev_major, rev_minor,
-			val & 0xffff);
-	if (rev_major == 0x08)
-		printf (" [OpenCore (R) Plus]");
-	printf ("\n");
-
-	/* Check register file */
-	val = rdctl (CTL_WVALID);
-	lo_limit = val & 0x01f;
-	hi_limit = (val>>5) & 0x1f;
-	nregs = (hi_limit + 2) * 16;
-	printf ("Reg file size: %d LO_LIMIT/HI_LIMIT: %d/%d\n",
-		nregs, lo_limit, hi_limit);
-
-	return (0);
-}
-
-
-int do_reset (void)
-{
-	/* trap 0 does the trick ... at least with the OCI debug
-	 * present -- haven't tested without it yet (stm).
-	 */
-	disable_interrupts ();
-	ipri (1);
-	asm volatile ("trap 0\n");
-
-	/* No return ;-) */
-
-	return(0);
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
-}
-#endif /* CONFIG_WATCHDOG */
diff --git a/arch/nios/cpu/interrupts.c b/arch/nios/cpu/interrupts.c
deleted file mode 100644
index 55a57185741..00000000000
--- a/arch/nios/cpu/interrupts.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <nios.h>
-#include <nios-io.h>
-#include <asm/ptrace.h>
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-/****************************************************************************/
-
-struct	irq_action {
-	interrupt_handler_t *handler;
-	void *arg;
-	int count;
-};
-
-static struct irq_action irq_vecs[64];
-
-/*************************************************************************/
-volatile ulong timestamp = 0;
-
-void reset_timer (void)
-{
-	timestamp = 0;
-}
-
-ulong get_timer (ulong base)
-{
-	WATCHDOG_RESET ();
-	return (timestamp - base);
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-
-/* The board must handle this interrupt if a timer is not
- * provided.
- */
-#if defined(CONFIG_SYS_NIOS_TMRBASE)
-void timer_interrupt (struct pt_regs *regs)
-{
-	/* Interrupt is cleared by writing anything to the
-	 * status register.
-	 */
-	nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
-	tmr->status = 0;
-	timestamp += CONFIG_SYS_NIOS_TMRMS;
-#ifdef CONFIG_STATUS_LED
-	status_led_tick(timestamp);
-#endif
-}
-#endif
-
-/*************************************************************************/
-int disable_interrupts (void)
-{
-	int val = 0;
-
-	/* Writing anything to CLR_IE disables interrupts */
-	val = rdctl (CTL_STATUS);
-	wrctl (CTL_CLR_IE, 0);
-	return (val & STATUS_IE);
-}
-
-void enable_interrupts( void )
-{
-	/* Writing anything SET_IE enables interrupts */
-	wrctl (CTL_SET_IE, 0);
-}
-
-void external_interrupt (struct pt_regs *regs)
-{
-	unsigned vec;
-
-	vec = (regs->status & STATUS_IPRI) >> 9;	/* ipri */
-
-	irq_vecs[vec].count++;
-	if (irq_vecs[vec].handler != NULL) {
-		(*irq_vecs[vec].handler)(irq_vecs[vec].arg);
-	} else {
-		/* A sad side-effect of masking a bogus interrupt is
-		 * that lower priority interrupts will also be disabled.
-		 * This is probably not what we want ... so hang insted.
-		 */
-		printf ("Unhandled interrupt: 0x%x\n", vec);
-		disable_interrupts ();
-		hang ();
-	}
-}
-
-/*************************************************************************/
-int interrupt_init (void)
-{
-	int vec;
-
-#if defined(CONFIG_SYS_NIOS_TMRBASE)
-	nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
-
-	tmr->control &= ~NIOS_TIMER_ITO;
-	tmr->control |= NIOS_TIMER_STOP;
-#if defined(CONFIG_SYS_NIOS_TMRCNT)
-	tmr->periodl = CONFIG_SYS_NIOS_TMRCNT & 0xffff;
-	tmr->periodh = (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff;
-#endif
-#endif
-
-	for (vec=0; vec<64; vec++ ) {
-		irq_vecs[vec].handler = NULL;
-		irq_vecs[vec].arg = NULL;
-		irq_vecs[vec].count = 0;
-	}
-
-	/* Need timus interruptus -- start the lopri timer */
-#if defined(CONFIG_SYS_NIOS_TMRBASE)
-	tmr->control |= ( NIOS_TIMER_ITO |
-			  NIOS_TIMER_CONT |
-			  NIOS_TIMER_START );
-	ipri (CONFIG_SYS_NIOS_TMRIRQ + 1);
-#endif
-	enable_interrupts ();
-	return (0);
-}
-
-void irq_install_handler (int vec, interrupt_handler_t *handler, void *arg)
-{
-	struct irq_action *irqa = irq_vecs;
-	int   i = vec;
-	int flag;
-
-	if (irqa[i].handler != NULL) {
-		printf ("Interrupt vector %d: handler 0x%x "
-			"replacing 0x%x\n",
-			vec, (uint)handler, (uint)irqa[i].handler);
-	}
-
-	flag = disable_interrupts ();
-	irqa[i].handler = handler;
-	irqa[i].arg = arg;
-	if (flag )
-		enable_interrupts ();
-}
-
-/*************************************************************************/
-#if defined(CONFIG_CMD_IRQ)
-int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	int vec;
-
-	printf ("\nInterrupt-Information:\n");
-	printf ("Nr  Routine   Arg       Count\n");
-
-	for (vec=0; vec<64; vec++) {
-		if (irq_vecs[vec].handler != NULL) {
-			printf ("%02d  %08lx  %08lx  %d\n",
-				vec,
-				(ulong)irq_vecs[vec].handler<<1,
-				(ulong)irq_vecs[vec].arg,
-				irq_vecs[vec].count);
-		}
-	}
-
-	return (0);
-}
-#endif
diff --git a/arch/nios/cpu/serial.c b/arch/nios/cpu/serial.c
deleted file mode 100644
index 44aa6001f59..00000000000
--- a/arch/nios/cpu/serial.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <nios-io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*------------------------------------------------------------------
- * JTAG acts as the serial port
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
-
-static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-void serial_setbrg( void ){ return; }
-int serial_init( void ) { return(0);}
-
-void serial_putc (char c)
-{
-	while ((jtag->txcntl & NIOS_JTAG_TRDY) != 0)
-		WATCHDOG_RESET ();
-	jtag->txcntl = NIOS_JTAG_TRDY | (unsigned char)c;
-}
-
-void serial_puts (const char *s)
-{
-	while (*s != 0)
-		serial_putc (*s++);
-}
-
-int serial_tstc (void)
-{
-	return (jtag->rxcntl & NIOS_JTAG_RRDY);
-}
-
-int serial_getc (void)
-{
-	int c;
-	while (serial_tstc() == 0)
-		WATCHDOG_RESET ();
-	c = jtag->rxcntl & 0x0ff;
-	jtag->rxcntl = 0;
-	return (c);
-}
-
-/*------------------------------------------------------------------
- * UART the serial port
- *-----------------------------------------------------------------*/
-#else
-
-static nios_uart_t *uart = (nios_uart_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
-
-/* Everything's already setup for fixed-baud PTF
- * assignment
- */
-void serial_setbrg (void){ return; }
-int serial_init (void) { return (0);}
-
-#else
-
-void serial_setbrg (void)
-{
-	unsigned div;
-
-	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
-	uart->divisor = div;
-	return;
-}
-
-int serial_init (void)
-{
-	serial_setbrg ();
-	return (0);
-}
-
-#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
-
-
-/*-----------------------------------------------------------------------
- * UART CONSOLE
- *---------------------------------------------------------------------*/
-void serial_putc (char c)
-{
-	if (c == '\n')
-		serial_putc ('\r');
-	while ((uart->status & NIOS_UART_TRDY) == 0)
-		WATCHDOG_RESET ();
-	uart->txdata = (unsigned char)c;
-}
-
-void serial_puts (const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
-int serial_tstc (void)
-{
-	return (uart->status & NIOS_UART_RRDY);
-}
-
-int serial_getc (void)
-{
-	while (serial_tstc () == 0)
-		WATCHDOG_RESET ();
-	return( uart->rxdata & 0x00ff );
-}
-
-#endif /* CONFIG_JTAG_CONSOLE */
diff --git a/arch/nios/cpu/spi.c b/arch/nios/cpu/spi.c
deleted file mode 100644
index 89f9797faa2..00000000000
--- a/arch/nios/cpu/spi.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/ctype.h>
-
-#if defined(CONFIG_NIOS_SPI)
-#include <nios-io.h>
-#include <spi.h>
-
-#if !defined(CONFIG_SYS_NIOS_SPIBASE)
-#error "*** CONFIG_SYS_NIOS_SPIBASE not defined ***"
-#endif
-
-#if !defined(CONFIG_SYS_NIOS_SPIBITS)
-#error "*** CONFIG_SYS_NIOS_SPIBITS not defined ***"
-#endif
-
-#if (CONFIG_SYS_NIOS_SPIBITS != 8) && (CONFIG_SYS_NIOS_SPIBITS != 16)
-#error "*** CONFIG_SYS_NIOS_SPIBITS should be either 8 or 16 ***"
-#endif
-
-static nios_spi_t	*spi	= (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef	DEBUG
-
-#ifdef  DEBUG
-
-#define	DPRINT(a)	printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
-	return hex_digit[i];
-}
-
-static void memdump (const void *pv, int num)
-{
-	int i;
-	const unsigned char *pc = (const unsigned char *) pv;
-
-	for (i = 0; i < num; i++)
-		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
-	printf ("\t");
-	for (i = 0; i < num; i++)
-		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
-	printf ("\n");
-}
-#else   /* !DEBUG */
-
-#define	DPRINT(a)
-#define	memdump(p,n)
-
-#endif  /* DEBUG */
-
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int mode)
-{
-	struct spi_slave *slave;
-
-	if (!spi_cs_is_valid(bus, cs))
-		return NULL;
-
-	slave = malloc(sizeof(struct spi_slave));
-	if (!slave)
-		return NULL;
-
-	slave->bus = bus;
-	slave->cs = cs;
-
-	/* TODO: Add support for different modes and speeds */
-
-	return slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	free(slave);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-
-}
-
-/*
- * SPI transfer:
- *
- * See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
- * for more informations.
- */
-int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
-		void *din, unsigned long flags)
-{
-	const u8 *txd = dout;
-	u8 *rxd = din;
-	int j;
-
-	DPRINT(("spi_xfer: slave %u:%u dout %08X din %08X bitlen %d\n",
-		slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen));
-
-	memdump(dout, (bitlen + 7) / 8);
-
-	if (flags & SPI_XFER_BEGIN)
-		spi_cs_activate(slave);
-
-	if (!(flags & SPI_XFER_END) || bitlen > CONFIG_SYS_NIOS_SPIBITS) {
-		/* leave chip select active */
-		spi->control |= NIOS_SPI_SSO;
-	}
-
-	for (	j = 0;				/* count each byte in */
-		j < ((bitlen + 7) / 8);		/* dout[] and din[] */
-
-#if	(CONFIG_SYS_NIOS_SPIBITS == 8)
-		j++) {
-
-		while ((spi->status & NIOS_SPI_TRDY) == 0)
-			;
-		spi->txdata = (unsigned)(txd[j]);
-
-		while ((spi->status & NIOS_SPI_RRDY) == 0)
-			;
-		rxd[j] = (unsigned char)(spi->rxdata & 0xff);
-
-#elif	(CONFIG_SYS_NIOS_SPIBITS == 16)
-		j++, j++) {
-
-		while ((spi->status & NIOS_SPI_TRDY) == 0)
-			;
-		if ((j+1) < ((bitlen + 7) / 8))
-			spi->txdata = (unsigned)((txd[j] << 8) | txd[j+1]);
-		else
-			spi->txdata = (unsigned)(txd[j] << 8);
-
-		while ((spi->status & NIOS_SPI_RRDY) == 0)
-			;
-		rxd[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
-		if ((j+1) < ((bitlen + 7) / 8))
-			rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
-
-#else
-#error "*** unsupported value of CONFIG_SYS_NIOS_SPIBITS ***"
-#endif
-
-	}
-
-	if (bitlen > CONFIG_SYS_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
-		spi->control &= ~NIOS_SPI_SSO;
-	}
-
-	if (flags & SPI_XFER_END)
-		spi_cs_deactivate(slave);
-
-	memdump(din, (bitlen + 7) / 8);
-
-	return 0;
-}
-
-#endif /* CONFIG_NIOS_SPI */
diff --git a/arch/nios/cpu/start.S b/arch/nios/cpu/start.S
deleted file mode 100644
index 3578a04d51e..00000000000
--- a/arch/nios/cpu/start.S
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <timestamp.h>
-#include <version.h>
-
-#if !defined(CONFIG_IDENT_STRING)
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#define STATUS_INIT	0x8600		/* IE=1, IPRI=2 */
-
-/*************************************************************************
- * RESTART
- ************************************************************************/
-
-	.text
-	.global _start
-
-_start:
-	bsr	0f
-	nop
-	.long	_start
-
-	/* GERMS -- The "standard-32" configuration GERMS monitor looks
-	 * for the string "Nios" at flash_base + 0xc (actually it only
-	 * tests for 'N', 'i'). You can leave support for this in place
-	 * as it's only a few words.
-	 */
-	. = _start + 0x000c
-	.string "Nios"
-
-	.align 4
-0:
-	/*
-	 * Early setup -- set cwp = HI_LIMIT, IPRI = 2, IE = 1 to
-	 * enable underflow exceptions. Disable cache.
-	 * NOTE: %o7 has return addr -- save in %g7 use later.
-	 */
-	mov	%g7, %o7
-
-	pfx	2			/* WVALID */
-	rdctl	%g0
-	lsri	%g0, 1
-	pfx	%hi(STATUS_INIT)
-	or	%g0, %lo(STATUS_INIT)
-	wrctl	%g0			/* update status */
-	nop
-
-	/*
-	 * STACK
-	 */
-	pfx	%hi(CONFIG_SYS_INIT_SP)
-	movi	%sp, %lo(CONFIG_SYS_INIT_SP)
-	pfx	%xhi(CONFIG_SYS_INIT_SP)
-	movhi	%sp, %xlo(CONFIG_SYS_INIT_SP)
-	mov	%fp, %sp
-
-	pfx	%hi(4*16)
-	subi	%sp, %lo(4*16)		/* Space for reg window mgmt */
-
-	/*
-	 * RELOCATE -- %g7 has return addr from bsr at _start.
-	 */
-	pfx	%hi(__u_boot_cmd_end)
-	movi	%g5, %lo(__u_boot_cmd_end)
-	pfx	%xhi(__u_boot_cmd_end)
-	movhi	%g5, %xlo(__u_boot_cmd_end) /* %g5 <- end address */
-
-	lsli	%g7, 1			/* mem = retaddr << 1 */
-	mov	%g6, %g7
-	subi	%g6, 4			/* %g6 <- src addr */
-	ld	%g7, [%g7]		/* %g7 <- dst addr */
-
-	/* No need to move text sections if we're already located
-	 * at the proper address.
-	 */
-	cmp	%g7, %g6
-	ifs	cc_z
-	br	reloc
-	nop				/* delay slot */
-
-1:	cmp	%g7, %g5
-	skps	cc_nz
-	br	2f
-	nop				/* delay slot */
-
-	ld	%g0, [%g6]
-	addi	%g6, 4			/* src++ */
-	st	[%g7], %g0
-	addi	%g7, 4			/* dst++ */
-	br	1b
-	nop				/* delay slot */
-2:
-
-	/*
-	 * Jump to relocation address
-	 */
-	 pfx	%hi(reloc@h)
-	 movi	%g0, %lo(reloc@h)
-	 pfx	%xhi(reloc@h)
-	 movhi	%g0, %xlo(reloc@h)
-	 jmp	%g0
-	 nop				/* delay slot */
-reloc:
-
-	/*
-	 * CLEAR BSS
-	 */
-	pfx	%hi(__bss_end)
-	movi	%g5, %lo(__bss_end)
-	pfx	%xhi(__bss_end)
-	movhi	%g5, %xlo(__bss_end)	/* %g5 <- end address */
-	pfx	%hi(__bss_start)
-	movi	%g7, %lo(__bss_start)
-	pfx	%xhi(__bss_start)
-	movhi	%g7, %xlo(__bss_start)	/* %g7 <- end address */
-
-	movi	%g0, 0
-3:	cmp	%g7, %g5
-	skps	cc_nz
-	br	4f
-	nop				/* delay slot */
-
-	st	[%g7], %g0
-	addi	%g7, 4			/* (delay slot) dst++ */
-	br	3b
-	nop				/* delay slot */
-4:
-
-	/*
-	 * INIT VECTOR TABLE
-	 */
-	pfx	%hi(CONFIG_SYS_VECT_BASE)
-	movi	%g0, %lo(CONFIG_SYS_VECT_BASE)
-	pfx	%xhi(CONFIG_SYS_VECT_BASE)
-	movhi	%g0, %xlo(CONFIG_SYS_VECT_BASE)	/* dst */
-	mov	%l0, %g0
-
-	pfx	%hi(_vectors)
-	movi	%g1, %lo(_vectors)
-	pfx	%xhi(_vectors)
-	movhi	%g1, %xlo(_vectors)	/* src */
-	bgen	%g2, 6			/* cnt = 64 */
-
-	ldp	%g3, [%l0, 3]		/* bkpt vector */
-	ldp	%g4, [%l0, 4]		/* single step vector */
-
-5:	ld	%g7, [%g1]
-	addi	%g1, 4			/* src++ */
-	st	[%g0], %g7
-	addi	%g0, 4			/* dst++ */
-
-	subi	%g2, 1			/* cnt-- */
-	ifrnz	%g2
-	br	5b
-	nop				/* delay slot */
-
-#if defined(CONFIG_ROM_STUBS)
-	/* Restore the breakpoint and single step exception
-	 * vectors to their original values.
-	 */
-	stp	[%l0,3], %g3		/* breakpoint */
-	stp	[%l0,4], %g4		/* single step */
-#endif
-
-	/* For debug startup convenience ... software breakpoints
-	 * set prior to this point may not succeed ;-)
-	 */
-	.global __start
-__start:
-
-	/*
-	 * Call board_init -- never returns
-	 */
-	pfx	%hi(board_init@h)
-	movi	%g1, %lo(board_init@h)
-	pfx	%xhi(board_init@h)
-	movhi	%g1, %xlo(board_init@h)
-	call	%g1
-	nop				/* Delaly slot */
-	/* NEVER RETURNS */
-
-/*
- * dly_clks -- Nios doesn't have a time/clk reference for simple
- * delay loops, so we do our best by counting instruction cycles.
- * A control register that counts system clock cycles would be
- * a handy feature -- hint for Altera ;-)
- */
-	.globl dly_clks
-	/* Each loop is 4 instructions as delay slot is always
-	 * executed. Each instruction is approximately 4 clocks
-	 * (according to some lame info from Altera). So ...
-	 * ... each loop is about 16 clocks.
-	 */
-
-dly_clks:
-	lsri	%o0, 4			/* cnt/16 */
-
-8:	skprnz	%o0
-	br	9f
-	subi	%o0, 1			/* cnt--, Delay slot */
-	br	8b
-	nop
-
-9:	lret
-	nop				/* Delay slot */
-
-
-	.data
-	.globl	version_string
-
-version_string:
-	.ascii U_BOOT_VERSION
-	.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
-	.ascii CONFIG_IDENT_STRING, "\0"
diff --git a/arch/nios/cpu/traps.S b/arch/nios/cpu/traps.S
deleted file mode 100644
index bc4d3f66dae..00000000000
--- a/arch/nios/cpu/traps.S
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-/*************************************************************************
- * Register window underflow
- *
- * The register window underflow exception occurs whenever the lowest
- * valid register window is in use (CWP=LO_LIMIT) and a save instruction
- * is issued. The save moves CWP below LO_LIMIT, %sp is set as normal,
- * then the exception is generated prior to executing the instruction
- * after the save.
- ************************************************************************/
-	.text
-	.global _cwp_lolimit
-	.align	4
-
-_cwp_lolimit:
-
-	/* Sixteen words are always allocated by the compiler in every
-	 * procedure's stack frame, always starting at %sp, for saving
-	 * 'in' and 'local' registers on a window overflow.
-	 *
-	 * Save the 'global' and 'in' regs on stack. They are restored
-	 * at cwp = HI_LIMIT. The 'local' regs aren't in-use at this point.
-	 */
-	sts	[%sp,0], %g0		/* Save 'global' regs*/
-	sts	[%sp,1], %g1
-	sts	[%sp,2], %g2
-	sts	[%sp,3], %g3
-	sts	[%sp,4], %g4
-	sts	[%sp,5], %g5
-	sts	[%sp,6], %g6
-	sts	[%sp,7], %g7
-
-	sts	[%sp,8], %i0		/* Save 'in' regs */
-	sts	[%sp,9], %i1
-	sts	[%sp,10], %i2
-	sts	[%sp,11], %i3
-	sts	[%sp,12], %i4
-	sts	[%sp,13], %i5
-	sts	[%sp,14], %i6
-	sts	[%sp,15], %i7
-
-	/* Save current %sp and return address in a global so they are
-	 * available at cwp = HI_LIMIT ... where the 'global'/'in' regs
-	 * are restored. NOTE: %sp changes with cwp.
-	 */
-	mov	%g7, %o7
-	mov	%g6, %sp
-
-	/* Get LO_LIMIT/HI_LIMIT to know where to start & stop. Note: in
-	 * the underflow exception, cwp is __NOT__ guaranteed to be zero.
-	 * If the OCI debug module is enabled the reset value for LO_LIMIT
-	 * is 2, not 1 -- so cwp can be 1 or 0.
-	 */
-	pfx	2			/* WVALID */
-	rdctl	%g1
-	mov	%g2, %g1
-	pfx	0
-	and	%g1, 0x1f		/* g1 <- LO_LIMIT */
-	lsri	%g2, 5
-	pfx	0
-	and	%g2,0x1f		/* g2 <- HI_LIMIT */
-
-	/* Set istatus so cwp = HI_LIMIT after tret
-	 */
-	movi	%g5, 0x1f
-	lsli	%g5, 4
-	not	%g5			/* mask to clr cwp */
-	pfx	1			/* istatus */
-	rdctl	%g0
-	and	%g0, %g5		/* clear cwp field */
-
-	mov	%g4, %g2
-	lsli	%g4, 4
-	or	%g0, %g4		/* cwp = HI_LIMIT */
-	pfx	1
-	wrctl	%g0			/* update istatus */
-
-	/* Now move up the register file, saving as we go. When loop
-	 * is first entered, %g1 is at LO_LIMIT.
-	 */
-0:
-	restore				/* cwp++ */
-	sts	[%sp,0], %l0		/* Save "local" regs*/
-	sts	[%sp,1], %l1
-	sts	[%sp,2], %l2
-	sts	[%sp,3], %l3
-	sts	[%sp,4], %l4
-	sts	[%sp,5], %l5
-	sts	[%sp,6], %l6
-	sts	[%sp,7], %l7
-
-	sts	[%sp,8], %i0		/* Save 'in' regs */
-	sts	[%sp,9], %i1
-	sts	[%sp,10], %i2
-	sts	[%sp,11], %i3
-	sts	[%sp,12], %i4
-	sts	[%sp,13], %i5
-	sts	[%sp,14], %i6
-	sts	[%sp,15], %i7
-
-	cmp	%g1, %g2		/* cwp == HI_LIMIT ? */
-	skps	cc_ne			/* if so, we're done */
-	br	1f
-	nop				/* delay slot */
-
-	inc	%g1			/* g1 <- cwp++ */
-	br	0b
-	nop				/* delay slot */
-
-	/* At this point cwp = HI_LIMIT, so the global/in regs that were
-	 * in place when the underflow occurred must be restored using
-	 * the original stack pointer (saved in g6).
-	 */
-1:
-	mov	%o7, %g7		/* restore return addr */
-	mov	%sp, %g6		/* Restore original sp */
-
-	lds	%g0, [%sp,0]		/* Restore 'global' regs*/
-	lds	%g1, [%sp,1]
-	lds	%g2, [%sp,2]
-	lds	%g3, [%sp,3]
-	lds	%g4, [%sp,4]
-	lds	%g5, [%sp,5]
-	lds	%g6, [%sp,6]
-	lds	%g7, [%sp,7]
-
-	lds	%i0, [%sp,8]		/* Restore 'in' regs*/
-	lds	%i1, [%sp,9]
-	lds	%i2, [%sp,10]
-	lds	%i3, [%sp,11]
-	lds	%i4, [%sp,12]
-	lds	%i5, [%sp,13]
-	lds	%i6, [%sp,14]
-	lds	%i7, [%sp,15]
-
-	tret	%o7			/* All done */
-
-/*************************************************************************
- * Register window overflow
- *
- * The register window overflow exception occurs whenever the highest
- * valid register window is in use (cwp = HI_LIMIT) and a restore
- * instruction is issued. Control is transferred to the overflow handler
- * before the instruction following restore is executed.
- *
- * When a register window overflow exception is taken, the exception
- * handler sees cwp at HI_LIMIT.
- ************************************************************************/
-	.text
-	.global _cwp_hilimit
-	.align	4
-
-_cwp_hilimit:
-
-	/* Save 'global'/'in' regs on the stack -- will restore when cwp
-	 * is at LO_LIMIT. Locals don't need saving as they are going away.
-	 */
-	sts	[%sp,0], %g0		/* Save "global" regs*/
-	sts	[%sp,1], %g1
-	sts	[%sp,2], %g2
-	sts	[%sp,3], %g3
-	sts	[%sp,4], %g4
-	sts	[%sp,5], %g5
-	sts	[%sp,6], %g6
-	sts	[%sp,7], %g7
-
-	sts	[%sp,8], %i0		/* Save 'in' regs */
-	sts	[%sp,9], %i1
-	sts	[%sp,10], %i2
-	sts	[%sp,11], %i3
-	sts	[%sp,12], %i4
-	sts	[%sp,13], %i5
-	sts	[%sp,14], %i6
-	sts	[%sp,15], %i7
-
-	/* The current %sp must be available in global to restore regs
-	 * saved on stack. Need return addr as well ;-)
-	 */
-	mov	%g7, %o7
-	mov	%g6, %sp
-
-	/* Get HI_LIMIT & LO_LIMIT
-	 */
-	pfx	2			/* WVALID */
-	rdctl	%g1
-	mov	%g2, %g1
-	pfx	0
-	and	%g1, 0x1f		/* g1 <- LO_LIMIT */
-	lsri	%g2, 5
-	pfx	0
-	and	%g2,0x1f		/* g2 <- HI_LIMIT */
-
-	/* Set istatus so cwp = LO_LIMIT after tret
-	 */
-	movi	%g5, 0x1f
-	lsli	%g5, 4
-	not	%g5			/* mask to clr cwp */
-	pfx	1			/* istatus */
-	rdctl	%g0
-	and	%g0, %g5		/* clear cwp field */
-
-	mov	%g4, %g1		/* g4 <- LO_LIMIT */
-	lsli	%g4, 4
-	or	%g0, %g4		/* cwp = LO_LIMIT */
-	pfx	1
-	wrctl	%g0			/* update istatus */
-
-	/* Move to cwp = LO_LIMIT-1 and restore 'in' regs.
-	 */
-	subi	%g4,(1 << 4)		/* g4 <- LO_LIMIT - 1 */
-	rdctl	%g0
-	and	%g0, %g5		/* clear cwp field */
-	or	%g0, %g4		/* cwp = LO_LIMIT - 1 */
-	wrctl	%g0			/* update status */
-	nop
-
-	mov	%sp, %g6		/* Restore sp */
-	lds	%i0, [%sp,8]		/* Restore 'in' regs */
-	lds	%i1, [%sp,9]
-	lds	%i2, [%sp,10]
-	lds	%i3, [%sp,11]
-	lds	%i4, [%sp,12]
-	lds	%i5, [%sp,13]
-	lds	%i6, [%sp,14]		/* sp in next window */
-	lds	%i7, [%sp,15]
-
-	/* Starting at LO_LIMIT-1, move up the register file, restoring
-	 * along the way.
-	 */
-0:
-	restore				/* cwp++ */
-	lds	%l0, [%sp,0]		/* Restore 'local' regs*/
-	lds	%l1, [%sp,1]
-	lds	%l2, [%sp,2]
-	lds	%l3, [%sp,3]
-	lds	%l4, [%sp,4]
-	lds	%l5, [%sp,5]
-	lds	%l6, [%sp,6]
-	lds	%l7, [%sp,7]
-
-	lds	%i0, [%sp,8]		/* Restore 'in' regs */
-	lds	%i1, [%sp,9]
-	lds	%i2, [%sp,10]
-	lds	%i3, [%sp,11]
-	lds	%i4, [%sp,12]
-	lds	%i5, [%sp,13]
-	lds	%i6, [%sp,14]		/* sp in next window */
-	lds	%i7, [%sp,15]
-
-	cmp	%g1, %g2		/* cwp == HI_LIMIT ? */
-	skps	cc_ne			/* if so, we're done */
-	br	1f
-	nop				/* delay slot */
-
-	inc	%g1			/* cwp++ */
-	br	0b
-	nop				/* delay slot */
-
-	/* All windows have been updated at this point, but the globals
-	 * still need to be restored. Go to cwp = LO_LIMIT-1 to get
-	 * some registers to use.
-	 */
-1:
-	rdctl	%g0
-	and	%g0, %g5		/* clear cwp field */
-	or	%g0, %g4		/* cwp = LO_LIMIT - 1 */
-	wrctl	%g0			/* update status */
-	nop
-
-	/* Now there are some registers available to use in restoring
-	 * the globals.
-	 */
-	mov	%sp, %g6
-	mov	%o7, %g7
-
-	lds	%g0, [%sp,0]		/* Restore "global" regs*/
-	lds	%g1, [%sp,1]
-	lds	%g2, [%sp,2]
-	lds	%g3, [%sp,3]
-	lds	%g4, [%sp,4]
-	lds	%g5, [%sp,5]
-	lds	%g6, [%sp,6]
-	lds	%g7, [%sp,7]
-
-	/* The tret moves istatus -> status. istatus was already set for
-	 * cwp = LO_LIMIT.
-	 */
-
-	tret	%o7			/* done */
-
-/*************************************************************************
- * Default exception handler
- *
- * The default handler passes control to external_interrupt(). So trap
- * or hardware interrupt hanlders can be installed using the familiar
- * irq_install_handler().
- *
- * Here, the stack is fixed-up and cwp is incremented prior to calling
- * external_interrupt(). This lets the underflow and overflow handlers
- * operate normally during the exception.
- ************************************************************************/
-	.text
-	.global _def_xhandler
-	.align	4
-
-_def_xhandler:
-
-	/* Allocate some stack space: 16 words at %sp to accomodate
-	 * a reg window underflow, 8 words to save interrupted task's
-	 * 'out' regs (which are now the 'in' regs), 8 words to preserve
-	 * the 'global' regs and 3 words to save the return address,
-	 * status and istatus. istatus must be saved in the event an
-	 * underflow occurs in a dispatched handler. status is saved so
-	 * a handler can access it on stack.
-	 */
-	pfx	%hi((16+16+3) * 4)
-	subi	%fp, %lo((16+16+3) * 4)
-	mov	%sp, %fp
-
-	/* Save the 'global' regs and the interrupted task's 'out' regs
-	 * (our 'in' regs) along with the return addr, status & istatus.
-	 * First 16 words are for underflow exception.
-	 */
-	rdctl	%l0			/* status */
-	pfx	1			/* istatus */
-	rdctl	%l1
-
-	sts	[%sp,16+0], %g0		/* Save 'global' regs*/
-	sts	[%sp,16+1], %g1
-	sts	[%sp,16+2], %g2
-	sts	[%sp,16+3], %g3
-	sts	[%sp,16+4], %g4
-	sts	[%sp,16+5], %g5
-	sts	[%sp,16+6], %g6
-	sts	[%sp,16+7], %g7
-
-	sts	[%sp,16+8], %i0		/* Save 'in' regs */
-	sts	[%sp,16+9], %i1
-	sts	[%sp,16+10], %i2
-	sts	[%sp,16+11], %i3
-	sts	[%sp,16+12], %i4
-	sts	[%sp,16+13], %i5
-	sts	[%sp,16+14], %i6
-	sts	[%sp,16+15], %i7
-
-	sts	[%sp,16+16], %l0	/* status */
-	sts	[%sp,16+17], %l1	/* istatus */
-	sts	[%sp,16+18], %o7	/* return addr */
-
-	/* Move to cwp+1 ... this guarantees cwp is at or above LO_LIMIT.
-	 * Need to set IPRI=3 and IE=1 to enable underflow exceptions.
-	 * NOTE: only the 'out' regs have been saved ... can't touch
-	 * the 'in' or 'local' here.
-	 */
-	restore				/* cwp++ */
-	rdctl	%o0			/* o0 <- status */
-
-	pfx	%hi(0x7e00)
-	movi	%o1, %lo(0x7e00)
-	not	%o1
-	and	%o0, %o1		/* clear IPRI */
-
-	pfx	%hi(0x8600)
-	movi	%o1, %lo(0x8600)
-	or	%o0, %o1		/* IPRI=3, IE=1 */
-
-	wrctl	%o0			/* o0 -> status */
-	nop
-
-	/* It's ok to call a C routine now since cwp >= LO_LIMIT,
-	 * interrupt task's registers are/will be preserved, and
-	 * underflow exceptions can be handled.
-	 */
-	pfx	%hi(external_interrupt@h)
-	movi	%o1, %lo(external_interrupt@h)
-	pfx	%xhi(external_interrupt@h)
-	movhi	%o1, %xlo(external_interrupt@h)
-	bgen	%o0, 4+2		/* 16 * 4 */
-	add	%o0, %sp		/* Ptr to regs */
-	call	%o1
-	nop
-
-	/* Move back to the exception register window, restore the 'out'
-	 * registers, then return from exception.
-	 */
-	rdctl	%o0			/* o0 <- status */
-	subi	%o0, 16
-	wrctl	%o0			/* cwp-- */
-	nop
-
-	mov	%sp, %fp
-	lds	%g0, [%sp,16+0]		/* Restore 'global' regs*/
-	lds	%g1, [%sp,16+1]
-	lds	%g2, [%sp,16+2]
-	lds	%g3, [%sp,16+3]
-	lds	%g4, [%sp,16+4]
-	lds	%g5, [%sp,16+5]
-	lds	%g6, [%sp,16+6]
-	lds	%g7, [%sp,16+7]
-
-	lds	%i0, [%sp,16+8]		/* Restore 'in' regs*/
-	lds	%i1, [%sp,16+9]
-	lds	%i2, [%sp,16+10]
-	lds	%i3, [%sp,16+11]
-	lds	%i4, [%sp,16+12]
-	lds	%i5, [%sp,16+13]
-	lds	%i6, [%sp,16+14]
-	lds	%i7, [%sp,16+15]
-
-	lds	%l0, [%sp,16+16]	/* status */
-	lds	%l1, [%sp,16+17]	/* istatus */
-	lds	%o7, [%sp,16+18]	/* return addr */
-
-	pfx	1
-	wrctl	%l1			/* restore istatus */
-
-	pfx	%hi((16+16+3) * 4)
-	addi	%sp, %lo((16+16+3) * 4)
-	mov	%fp, %sp
-
-	tret	%o7			/* Done */
-
-
-/*************************************************************************
- * Timebase Timer Interrupt -- This has identical structure to above,
- * but calls timer_interrupt().  Doing it this way keeps things similar
- * to other architectures (e.g. ppc).
- ************************************************************************/
-	.text
-	.global _timebase_int
-	.align	4
-
-_timebase_int:
-
-	/* Allocate  stack space.
-	 */
-	pfx	%hi((16+16+3) * 4)
-	subi	%fp, %lo((16+16+3) * 4)
-	mov	%sp, %fp
-
-	/* Save the 'global' regs & 'out' regs (our 'in' regs)
-	 */
-	rdctl	%l0			/* status */
-	pfx	1			/* istatus */
-	rdctl	%l1
-
-	sts	[%sp,16+0], %g0		/* Save 'global' regs*/
-	sts	[%sp,16+1], %g1
-	sts	[%sp,16+2], %g2
-	sts	[%sp,16+3], %g3
-	sts	[%sp,16+4], %g4
-	sts	[%sp,16+5], %g5
-	sts	[%sp,16+6], %g6
-	sts	[%sp,16+7], %g7
-
-	sts	[%sp,16+8], %i0		/* Save 'in' regs */
-	sts	[%sp,16+9], %i1
-	sts	[%sp,16+10], %i2
-	sts	[%sp,16+11], %i3
-	sts	[%sp,16+12], %i4
-	sts	[%sp,16+13], %i5
-	sts	[%sp,16+14], %i6
-	sts	[%sp,16+15], %i7
-
-	sts	[%sp,16+16], %l0	/* status */
-	sts	[%sp,16+17], %l1	/* istatus */
-	sts	[%sp,16+18], %o7	/* return addr */
-
-	/* Move to cwp+1.
-	 */
-	restore				/* cwp++ */
-	rdctl	%o0			/* o0 <- status */
-
-	pfx	%hi(0x7e00)
-	movi	%o1, %lo(0x7e00)
-	not	%o1
-	and	%o0, %o1		/* clear IPRI */
-
-	pfx	%hi(0x8600)
-	movi	%o1, %lo(0x8600)
-	or	%o0, %o1		/* IPRI=3, IE=1 */
-
-	wrctl	%o0			/* o0 -> status */
-	nop
-
-	/* Call timer_interrupt()
-	 */
-	pfx	%hi(timer_interrupt@h)
-	movi	%o1, %lo(timer_interrupt@h)
-	pfx	%xhi(timer_interrupt@h)
-	movhi	%o1, %xlo(timer_interrupt@h)
-	bgen	%o0, 4+2		/* 16 * 4 */
-	add	%o0, %sp		/* Ptr to regs */
-	call	%o1
-	nop
-
-	/* Move back to the exception register window, restore the 'out'
-	 * registers, then return from exception.
-	 */
-	rdctl	%o0			/* o0 <- status */
-	subi	%o0, 16
-	wrctl	%o0			/* cwp-- */
-	nop
-
-	mov	%sp, %fp
-	lds	%g0, [%sp,16+0]		/* Restore 'global' regs*/
-	lds	%g1, [%sp,16+1]
-	lds	%g2, [%sp,16+2]
-	lds	%g3, [%sp,16+3]
-	lds	%g4, [%sp,16+4]
-	lds	%g5, [%sp,16+5]
-	lds	%g6, [%sp,16+6]
-	lds	%g7, [%sp,16+7]
-
-	lds	%i0, [%sp,16+8]		/* Restore 'in' regs*/
-	lds	%i1, [%sp,16+9]
-	lds	%i2, [%sp,16+10]
-	lds	%i3, [%sp,16+11]
-	lds	%i4, [%sp,16+12]
-	lds	%i5, [%sp,16+13]
-	lds	%i6, [%sp,16+14]
-	lds	%i7, [%sp,16+15]
-
-	lds	%l0, [%sp,16+16]	/* status */
-	lds	%l1, [%sp,16+17]	/* istatus */
-	lds	%o7, [%sp,16+18]	/* return addr */
-
-	pfx	1
-	wrctl	%l1			/* restore istatus */
-
-	pfx	%hi((16+16+3) * 4)
-	addi	%sp, %lo((16+16+3) * 4)
-	mov	%fp, %sp
-
-	tret	%o7			/* Done */
-
-/*************************************************************************
- * GDB stubs
- ************************************************************************/
-	.text
-	.global _brkpt_hw_int, _brkpt_sw_int
-	.align	4
-
-_brkpt_hw_int:
-	movi	%l1, 9
-	pfx	3
-	wrctl	%l1
-	pfx	4
-	wrctl	%l1
-
-_brkpt_sw_int:
-	movi	%l1, 9
-	pfx	3
-	wrctl	%l1
-	pfx	4
-	wrctl	%l1
-
-	tret	%o7
diff --git a/arch/nios/include/asm/bitops.h b/arch/nios/include/asm/bitops.h
deleted file mode 100644
index 0be74f42b8f..00000000000
--- a/arch/nios/include/asm/bitops.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_NIOS_BITOPS_H_
-#define _ASM_NIOS_BITOPS_H_
-
-
-extern void set_bit(int nr, volatile void * a);
-extern void clear_bit(int nr, volatile void * a);
-extern int test_and_clear_bit(int nr, volatile void * a);
-extern void change_bit(unsigned long nr, volatile void *addr);
-extern int test_and_set_bit(int nr, volatile void * a);
-extern int test_and_change_bit(int nr, volatile void * addr);
-extern int test_bit(int nr, volatile void * a);
-extern int ffs(int i);
-#define PLATFORM_FFS
-
-#endif /* _ASM_NIOS_BITOPS_H */
diff --git a/arch/nios/include/asm/byteorder.h b/arch/nios/include/asm/byteorder.h
deleted file mode 100644
index dc7102115f0..00000000000
--- a/arch/nios/include/asm/byteorder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
-* Scott McNutt <smcnutt@psyent.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#ifndef __ASM_NIOS_BYTEORDER_H
-#define __ASM_NIOS_BYTEORDER_H
-
-#include <asm/types.h>
-#include <linux/byteorder/little_endian.h>
-
-#endif
diff --git a/arch/nios/include/asm/cache.h b/arch/nios/include/asm/cache.h
deleted file mode 100644
index 3cdb7039ff8..00000000000
--- a/arch/nios/include/asm/cache.h
+++ /dev/null
@@ -1 +0,0 @@
-/*FIXME: Implement this! */
diff --git a/arch/nios/include/asm/config.h b/arch/nios/include/asm/config.h
deleted file mode 100644
index 2efe898b350..00000000000
--- a/arch/nios/include/asm/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-/* Relocation to SDRAM works on all NIOS boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
-#endif
diff --git a/arch/nios/include/asm/global_data.h b/arch/nios/include/asm/global_data.h
deleted file mode 100644
index fa54ee4dd3a..00000000000
--- a/arch/nios/include/asm/global_data.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef	__ASM_NIOS_GLOBALDATA_H
-#define __ASM_NIOS_GLOBALDATA_H
-
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned long	baudrate;
-	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
-	unsigned long	have_console;	/* serial_init() was called */
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-	unsigned long	post_log_word;	/* Record POST activities */
-	unsigned long	post_init_f_time; /* When post_init_f started */
-#endif
-	void		**jt;		/* Standalone app jump table */
-} gd_t;
-
-/* flags */
-#define	GD_FLG_RELOC	0x00001		/* Code was relocated to RAM		*/
-#define	GD_FLG_DEVINIT	0x00002		/* Devices have been initialized	*/
-#define	GD_FLG_SILENT	0x00004		/* Silent mode				*/
-#define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
-#define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
-#define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
-#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
-
-#define DECLARE_GLOBAL_DATA_PTR     register gd_t *gd asm ("%g7")
-
-#endif /* __ASM_NIOS_GLOBALDATA_H */
diff --git a/arch/nios/include/asm/io.h b/arch/nios/include/asm/io.h
deleted file mode 100644
index 899682cc40d..00000000000
--- a/arch/nios/include/asm/io.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASM_NIOS_IO_H_
-#define __ASM_NIOS_IO_H_
-
-#define __raw_writeb(v,a)       (*(volatile unsigned char  *)(a) = (v))
-#define __raw_writew(v,a)       (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a)       (*(volatile unsigned int   *)(a) = (v))
-
-#define __raw_readb(a)          (*(volatile unsigned char  *)(a))
-#define __raw_readw(a)          (*(volatile unsigned short *)(a))
-#define __raw_readl(a)          (*(volatile unsigned int   *)(a))
-
-#define readb(addr)\
-	({unsigned char val;\
-	 asm volatile(  "	pfxio	0		\n"\
-			"	ld	%0, [%1]	\n"\
-			"	ext8d	%0, %1		\n"\
-			:"=r"(val) : "r" (addr)); val;})
-
-#define readw(addr)\
-	({unsigned short val;\
-	 asm volatile(  "	pfxio	0		\n"\
-			"	ld	%0, [%1]	\n"\
-			"	ext16d	%0, %1		\n"\
-			:"=r"(val) : "r" (addr)); val;})
-
-#define readl(addr)\
-	({unsigned long val;\
-	 asm volatile(  "	pfxio	0		\n"\
-			"	ld	%0, [%1]	\n"\
-			:"=r"(val) : "r" (addr)); val;})
-
-#define writeb(addr,val)\
-	asm volatile (	"	fill8	%%r0, %1	\n"\
-			"	st8d	[%0], %%r0	\n"\
-			: : "r" (addr), "r" (val) : "r0")
-
-#define writew(addr,val)\
-	asm volatile (	"	fill16	%%r0, %1	\n"\
-			"	st16d	[%0], %%r0	\n"\
-			: : "r" (addr), "r" (val) : "r0")
-
-#define writel(addr,val)\
-	asm volatile (	"	st	[%0], %1	\n"\
-			: : "r" (addr), "r" (val))
-
-#define inb(addr)	readb(addr)
-#define inw(addr)	readw(addr)
-#define inl(addr)	readl(addr)
-#define outb(val,addr)	writeb(addr,val)
-#define outw(val,addr)	writew(addr,val)
-#define outl(val,addr)	writel(addr,val)
-
-static inline void insb (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned char *p = dst;
-	while (count--) *p++ = inb (port);
-}
-static inline void insw (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned short *p = dst;
-	while (count--) *p++ = inw (port);
-}
-static inline void insl (unsigned long port, void *dst, unsigned long count)
-{
-	unsigned long *p = dst;
-	while (count--) *p++ = inl (port);
-}
-
-static inline void outsb (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned char *p = src;
-	while (count--) outb (*p++, port);
-}
-
-static inline void outsw (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned short *p = src;
-	while (count--) outw (*p++, port);
-}
-static inline void outsl (unsigned long port, const void *src, unsigned long count)
-{
-	const unsigned long *p = src;
-	while (count--) outl (*p++, port);
-}
-
-static inline void sync(void)
-{
-}
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-#define MAP_NOCACHE	(0)
-#define MAP_WRCOMBINE	(0)
-#define MAP_WRBACK	(0)
-#define MAP_WRTHROUGH	(0)
-
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
-	return (void *)paddr;
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
-
-}
-
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
-	return (phys_addr_t)(vaddr);
-}
-
-#endif /* __ASM_NIOS_IO_H_ */
diff --git a/arch/nios/include/asm/posix_types.h b/arch/nios/include/asm/posix_types.h
deleted file mode 100644
index eb7421489f2..00000000000
--- a/arch/nios/include/asm/posix_types.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef __ASM_NIOS_POSIX_TYPES_H
-#define __ASM_NIOS_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short	__kernel_dev_t;
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned short	__kernel_mode_t;
-typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef	__FD_CLR
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef	__FD_ISSET
-#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif
diff --git a/arch/nios/include/asm/processor.h b/arch/nios/include/asm/processor.h
deleted file mode 100644
index 78b8976ca3d..00000000000
--- a/arch/nios/include/asm/processor.h
+++ /dev/null
@@ -1 +0,0 @@
-/* FIXME: Implement this! */
diff --git a/arch/nios/include/asm/psr.h b/arch/nios/include/asm/psr.h
deleted file mode 100644
index 6e8eba8095b..00000000000
--- a/arch/nios/include/asm/psr.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _NIOS_PSR_H
-#define _NIOS_PSR_H
-
-
-#endif /* _NIOS_PSR_H */
diff --git a/arch/nios/include/asm/ptrace.h b/arch/nios/include/asm/ptrace.h
deleted file mode 100644
index 73754c8696f..00000000000
--- a/arch/nios/include/asm/ptrace.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _NIOS_PTRACE_H
-#define _NIOS_PTRACE_H
-
-struct pt_regs {
-	unsigned global[8];
-	unsigned in[8];
-	unsigned status;
-	unsigned istatus;
-	unsigned retaddr;
-};
-
-
-#endif /* _NIOS_PTRACE_H */
diff --git a/arch/nios/include/asm/status_led.h b/arch/nios/include/asm/status_led.h
deleted file mode 100644
index 241c9176889..00000000000
--- a/arch/nios/include/asm/status_led.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * asm-nios/status_led.h
- *
- * NIOS PIO based status led support functions
- */
-
-#ifndef __ASM_STATUS_LED_H__
-#define __ASM_STATUS_LED_H__
-
-#include <nios-io.h>
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#ifdef	STATUS_LED_WRONLY	/* emulate read access */
-static led_id_t __led_portval = 0;
-#endif
-
-static inline void __led_init (led_id_t mask, int state)
-{
-	nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
-
-#ifdef	STATUS_LED_WRONLY	/* emulate read access */
-
-#if (STATUS_LED_ACTIVE == 0)
-	if (state == STATUS_LED_ON)
-		__led_portval &= ~mask;
-	else
-		__led_portval |= mask;
-#else
-	if (state == STATUS_LED_ON)
-		__led_portval |= mask;
-	else
-		__led_portval &= ~mask;
-#endif
-
-	piop->data = __led_portval;
-
-#else	/* !STATUS_LED_WRONLY */
-
-#if (STATUS_LED_ACTIVE == 0)
-	if (state == STATUS_LED_ON)
-		piop->data &= ~mask;
-	else
-		piop->data |= mask;
-#else
-	if (state == STATUS_LED_ON)
-		piop->data |= mask;
-	else
-		piop->data &= ~mask;
-#endif
-
-	piop->direction |= mask;
-
-#endif	/* STATUS_LED_WRONLY */
-}
-
-static inline void __led_toggle (led_id_t mask)
-{
-	nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
-
-#ifdef	STATUS_LED_WRONLY	/* emulate read access */
-
-	__led_portval ^= mask;
-	piop->data = __led_portval;
-
-#else	/* !STATUS_LED_WRONLY */
-
-	piop->data ^= mask;
-
-#endif	/* STATUS_LED_WRONLY */
-}
-
-static inline void __led_set (led_id_t mask, int state)
-{
-	nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
-
-#ifdef	STATUS_LED_WRONLY	/* emulate read access */
-
-#if (STATUS_LED_ACTIVE == 0)
-	if (state == STATUS_LED_ON)
-		__led_portval &= ~mask;
-	else
-		__led_portval |= mask;
-#else
-	if (state == STATUS_LED_ON)
-		__led_portval |= mask;
-	else
-		__led_portval &= ~mask;
-#endif
-
-	piop->data = __led_portval;
-
-#else	/* !STATUS_LED_WRONLY */
-
-#if (STATUS_LED_ACTIVE == 0)
-	if (state == STATUS_LED_ON)
-		piop->data &= ~mask;
-	else
-		piop->data |= mask;
-#else
-	if (state == STATUS_LED_ON)
-		piop->data |= mask;
-	else
-		piop->data &= ~mask;
-#endif
-
-#endif	/* STATUS_LED_WRONLY */
-}
-
-#endif	/* __ASM_STATUS_LED_H__ */
diff --git a/arch/nios/include/asm/string.h b/arch/nios/include/asm/string.h
deleted file mode 100644
index fa33275010f..00000000000
--- a/arch/nios/include/asm/string.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_NIOS_STRING_H
-#define __ASM_NIOS_STRING_H
-
-#undef __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#undef __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#undef __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMZERO
-extern void memzero(void *ptr, __kernel_size_t n);
-
-#endif
diff --git a/arch/nios/include/asm/system.h b/arch/nios/include/asm/system.h
deleted file mode 100644
index 9a9383d1619..00000000000
--- a/arch/nios/include/asm/system.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_NIOS_SYSTEM_H_
-#define _ASM_NIOS_SYSTEM_H_
-
-#endif /* _ASM_NIOS_SYSTEM_H */
diff --git a/arch/nios/include/asm/types.h b/arch/nios/include/asm/types.h
deleted file mode 100644
index 636e12fd38e..00000000000
--- a/arch/nios/include/asm/types.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _NIOS_TYPES_H
-#define _NIOS_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-#endif /* __KERNEL__ */
-
-#endif /* _NIOS_TYPES_H */
diff --git a/arch/nios/include/asm/u-boot.h b/arch/nios/include/asm/u-boot.h
deleted file mode 100644
index bdb6cf21b65..00000000000
--- a/arch/nios/include/asm/u-boot.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * (C) Copyright 2003
- * Psyent Corporation
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************
- * NOTE: This header file defines an interface to U-Boot. Including
- * this (unmodified) header file in another file is considered normal
- * use of U-Boot, and does *not* fall under the heading of "derived
- * work".
- ********************************************************************
- */
-
-#ifndef _U_BOOT_H_
-#define _U_BOOT_H_
-
-typedef struct bd_info {
-	unsigned long	bi_memstart;	/* start of DRAM memory */
-	phys_size_t	bi_memsize;	/* size	 of DRAM memory in bytes */
-	unsigned long	bi_flashstart;	/* start of FLASH memory */
-	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
-	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
-	unsigned long	bi_sramstart;	/* start of SRAM memory */
-	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	unsigned long	bi_ip_addr;	/* IP Address */
-	unsigned long	bi_baudrate;	/* Console Baudrate */
-} bd_t;
-
-
-#endif	/* _U_BOOT_H_ */
diff --git a/arch/nios/lib/Makefile b/arch/nios/lib/Makefile
deleted file mode 100644
index f66e9893ab5..00000000000
--- a/arch/nios/lib/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(ARCH).a
-
-SOBJS-y	+=
-
-COBJS-y	+= board.o
-COBJS-y	+= bootm.o
-COBJS-y	+= cache.o
-COBJS-y	+= divmod.o
-COBJS-y	+= mult.o
-COBJS-y	+= time.o
-
-SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/nios/lib/board.c b/arch/nios/lib/board.c
deleted file mode 100644
index 5d2fb2ec4af..00000000000
--- a/arch/nios/lib/board.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include <watchdog.h>
-#include <malloc.h>
-#include <net.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-
-
-typedef int (init_fnc_t) (void);
-
-
-/************************************************************************
- * Initialization sequence						*
- ***********************************************************************/
-
-init_fnc_t *init_sequence[] = {
-
-#if defined(CONFIG_BOARD_EARLY_INIT_F)
-	board_early_init_f,	/* Call board-specific init code early.*/
-#endif
-
-	env_init,
-	serial_init,
-	console_init_f,
-	display_options,
-	checkcpu,
-	checkboard,
-	NULL,			/* Terminate this list */
-};
-
-
-/***********************************************************************/
-void board_init (void)
-{
-	bd_t *bd;
-	init_fnc_t **init_fnc_ptr;
-	char *s, *e;
-	int i;
-
-	/* Pointer is writable since we allocated a register for it.
-	 * Nios treats CONFIG_SYS_GBL_DATA_OFFSET as an address.
-	 */
-	gd = (gd_t *)CONFIG_SYS_GBL_DATA_OFFSET;
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
-
-	memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE );
-
-	gd->bd = (bd_t *)(gd+1);	/* At end of global data */
-	gd->baudrate = CONFIG_BAUDRATE;
-	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
-
-	bd = gd->bd;
-	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;
-	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-#if	defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
-	bd->bi_sramstart= CONFIG_SYS_SRAM_BASE;
-	bd->bi_sramsize	= CONFIG_SYS_SRAM_SIZE;
-#endif
-	bd->bi_baudrate	= CONFIG_BAUDRATE;
-
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		WATCHDOG_RESET ();
-		if ((*init_fnc_ptr) () != 0) {
-			hang ();
-		}
-	}
-
-	WATCHDOG_RESET ();
-
-	/* The Malloc area is immediately below the monitor copy in RAM */
-	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-
-	WATCHDOG_RESET ();
-	bd->bi_flashsize = flash_init();
-
-	WATCHDOG_RESET ();
-	env_relocate();
-
-	bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
-	WATCHDOG_RESET ();
-	stdio_init();
-	jumptable_init();
-	console_init_r();
-	/*
-	 */
-
-	WATCHDOG_RESET ();
-	interrupt_init ();
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-
-	/* main_loop */
-	for (;;) {
-		WATCHDOG_RESET ();
-		main_loop ();
-	}
-}
-
-
-/***********************************************************************/
-
-void hang (void)
-{
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
-	status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
-#endif
-	puts("### ERROR ### Please reset board ###\n");
-	for (;;);
-}
-
-unsigned long do_go_exec (ulong (*entry)(int, char *[]), int argc, char *argv[])
-{
-	/*
-	 * x86 does not use a dedicated register to pass the pointer
-	 * to the global_data
-	 */
-	argv[-1] = (char *)gd;
-	return entry (argc, argv);
-}
diff --git a/arch/nios/lib/bootm.c b/arch/nios/lib/bootm.c
deleted file mode 100644
index b0d5b825746..00000000000
--- a/arch/nios/lib/bootm.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-
-/* FIXME: Once we find a stable version of uC-linux for nios
- * we can get this working. ;-)
- *
- */
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
-	return 1;
-}
diff --git a/arch/nios/lib/cache.c b/arch/nios/lib/cache.c
deleted file mode 100644
index 87dbab1734d..00000000000
--- a/arch/nios/lib/cache.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-
-void flush_cache (ulong addr, ulong size)
-{
-	/* Nios cache is write-thru -- nothing to do here.
-	 */
-	return;
-}
diff --git a/arch/nios/lib/divmod.c b/arch/nios/lib/divmod.c
deleted file mode 100644
index 3c7e71e9757..00000000000
--- a/arch/nios/lib/divmod.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is part of GNU CC.
- *
- * GNU CC is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published
- * by the Free Software Foundation; either version 2, or (at your
- * option) any later version.
- *
- * GNU CC is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with GNU CC; see the file COPYING.  If not, write
- * to the Free Software Foundation, 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-
-
-#include "math.h"
-
-USItype udivmodsi4 (USItype num, USItype den, word_type modwanted)
-{
-	USItype bit = 1;
-	USItype res = 0;
-
-	while (den < num && bit && !(den & (1L << 31))) {
-		den <<= 1;
-		bit <<= 1;
-	}
-	while (bit) {
-		if (num >= den) {
-			num -= den;
-			res |= bit;
-		}
-		bit >>= 1;
-		den >>= 1;
-	}
-	if (modwanted)
-		return num;
-	return res;
-}
-
-
-SItype __divsi3 (SItype a, SItype b)
-{
-	word_type neg = 0;
-	SItype res;
-
-	if (a < 0) {
-		a = -a;
-		neg = !neg;
-	}
-
-	if (b < 0) {
-		b = -b;
-		neg = !neg;
-	}
-
-	res = udivmodsi4 (a, b, 0);
-
-	if (neg)
-		res = -res;
-
-	return res;
-}
-
-
-SItype __modsi3 (SItype a, SItype b)
-{
-	word_type neg = 0;
-	SItype res;
-
-	if (a < 0) {
-		a = -a;
-		neg = 1;
-	}
-
-	if (b < 0)
-		b = -b;
-
-	res = udivmodsi4 (a, b, 1);
-
-	if (neg)
-		res = -res;
-
-	return res;
-}
-
-
-SItype __udivsi3 (SItype a, SItype b)
-{
-	return udivmodsi4 (a, b, 0);
-}
-
-
-SItype __umodsi3 (SItype a, SItype b)
-{
-	return udivmodsi4 (a, b, 1);
-}
diff --git a/arch/nios/lib/math.h b/arch/nios/lib/math.h
deleted file mode 100644
index f0aed8edc36..00000000000
--- a/arch/nios/lib/math.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#define BITS_PER_UNIT	8
-
-typedef	 int HItype			__attribute__ ((mode (HI)));
-typedef unsigned int UHItype		__attribute__ ((mode (HI)));
-
-typedef		 int SItype		__attribute__ ((mode (SI)));
-typedef unsigned int USItype		__attribute__ ((mode (SI)));
-
-typedef int word_type			__attribute__ ((mode (__word__)));
-
-struct SIstruct {HItype low, high;};
-
-typedef union {
-	struct SIstruct s;
-	SItype ll;
-} SIunion;
diff --git a/arch/nios/lib/mult.c b/arch/nios/lib/mult.c
deleted file mode 100644
index ec8139ed5a6..00000000000
--- a/arch/nios/lib/mult.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is part of GNU CC.
- *
- * GNU CC is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published
- * by the Free Software Foundation; either version 2, or (at your
- * option) any later version.
- *
- * GNU CC is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with GNU CC; see the file COPYING.  If not, write
- * to the Free Software Foundation, 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-
-
-#include <common.h>
-
-#if !defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP)
-
-#include "math.h"
-
-USItype __mulsi3 (USItype a, USItype b)
-{
-	USItype c = 0;
-
-	while (a != 0) {
-		if (a & 1)
-			c += b;
-		a >>= 1;
-		b <<= 1;
-	}
-
-	return c;
-}
-
-
-UHItype __mulhi3 (UHItype a, UHItype b)
-{
-	UHItype c = 0;
-
-	while (a != 0) {
-		if (a & 1)
-			c += b;
-		a >>= 1;
-		b <<= 1;
-	}
-
-	return c;
-}
-
-#endif /*!defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP) */
diff --git a/arch/nios/lib/time.c b/arch/nios/lib/time.c
deleted file mode 100644
index d5096ee1290..00000000000
--- a/arch/nios/lib/time.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-
-extern void dly_clks( unsigned long ticks );
-
-void __udelay(unsigned long usec)
-{
-	/* The Nios core doesn't have a timebase, so we do our
-	 * best for now and call a low-level loop that counts
-	 * cpu clocks.
-	 */
-	unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec;
-	dly_clks (cnt);
-}
diff --git a/board/altera/dk1c20/Makefile b/board/altera/dk1c20/Makefile
deleted file mode 100644
index 60ac6e6b704..00000000000
--- a/board/altera/dk1c20/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o flash.o misc.o
-SOBJS  = vectors.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/dk1c20/config.mk b/board/altera/dk1c20/config.mk
deleted file mode 100644
index d200715f5fd..00000000000
--- a/board/altera/dk1c20/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003
-# Psyent Corporation
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x018c0000
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/dk1c20/dk1c20.c b/board/altera/dk1c20/dk1c20.c
deleted file mode 100644
index 0bcaa4fd147..00000000000
--- a/board/altera/dk1c20/dk1c20.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * CompactFlash/IDE:
- * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <nios-io.h>
-#if	defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#endif
-
-void _default_hdlr (void)
-{
-	printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if	defined(CONFIG_SEVENSEG)
-	/* init seven segment led display and switch off */
-	sevenseg_set(SEVENSEG_OFF);
-#endif
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("Board: Altera Nios 1C20 Development Kit\n");
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return (0);
-}
-
-#if defined(CONFIG_CMD_IDE)
-int ide_preinit (void)
-{
-	nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT;
-	nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER;
-	nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL;
-
-	/* setup data direction registers */
-	present->direction = NIOS_PIO_IN;
-	power->direction = NIOS_PIO_OUT;
-	atasel->direction = NIOS_PIO_OUT;
-
-	/* Check for presence of card */
-	if (present->data)
-		return 1;
-	printf ("Ok\n");
-
-	/* Finish setup */
-	power->data = 1;	/* Turn on power FET */
-	atasel->data = 0;	/* Put in ATA mode */
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/altera/dk1c20/flash.c b/board/altera/dk1c20/flash.c
deleted file mode 100644
index 8bddd38e166..00000000000
--- a/board/altera/dk1c20/flash.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*
- * include common flash code (for altera boards)
- */
-#include "../common/flash.c"
-
-/*----------------------------------------------------------------------*/
-#define BANKSZ		CONFIG_SYS_FLASH_SIZE
-#define SECTSZ		(64 * 1024)
-#define USERFLASH	(2 * 1024 * 1024)	/* bottom 2 MB for user	*/
-
-/*----------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
-	int i;
-	unsigned long addr;
-	flash_info_t *fli = &flash_info[0];
-
-	fli->size = BANKSZ;
-	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
-
-	addr = CONFIG_SYS_FLASH_BASE;
-	for (i = 0; i < fli->sector_count; ++i) {
-		fli->start[i] = addr;
-		addr += SECTSZ;
-
-		/* Protect all but 2 MByte user area */
-		if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
-			fli->protect[i] = 0;
-		else
-			fli->protect[i] = 1;
-	}
-
-	return (BANKSZ);
-}
diff --git a/board/altera/dk1c20/misc.c b/board/altera/dk1c20/misc.c
deleted file mode 100644
index f25cdebd743..00000000000
--- a/board/altera/dk1c20/misc.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * board/altera/dk1s10/misc.c
- *
- * miscellaneous board interfaces / drivers
- */
-
-#include <common.h>
-
-#if	defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#include "../common/sevenseg.c"
-#endif
diff --git a/board/altera/dk1c20/u-boot.lds b/board/altera/dk1c20/u-boot.lds
deleted file mode 100644
index 50c3fe75a08..00000000000
--- a/board/altera/dk1c20/u-boot.lds
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  arch/nios/cpu/start.o (.text)
-	  *(.text)
-	}
-	__text_end = .;
-
-	. = ALIGN(4);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	}
-	__rodata_end = .;
-
-	. = ALIGN(4);
-	.data :
-	{
-		*(.data)
-	}
-	. = ALIGN(4);
-	__data_end = .;
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	__bss_start = .;
-	. = ALIGN(4);
-	.bss (NOLOAD) :
-	{
-		*(.bss)
-	}
-	. = ALIGN(4);
-	__bss_end = .;
-}
diff --git a/board/altera/dk1c20/vectors.S b/board/altera/dk1c20/vectors.S
deleted file mode 100644
index c83c0e70e11..00000000000
--- a/board/altera/dk1c20/vectors.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- *	_cwp_lolimit	-Handles register window underflows.
- *	_cwp_hilimit	-Handles register window overflows.
- *	_timebase_int	-Increments the timebase.
- *	_brkpt_hw_int	-Hardware breakpoint handler.
- *	_brkpt_sw_int	-Software breakpoint handler.
- *	_def_xhandler	-Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
-	.data
-	.global _vectors
-	.align	4
-_vectors:
-
-	.long	_def_xhandler@h		/* Vector 0  - NMI */
-	.long	_cwp_lolimit@h		/* Vector 1  -  underflow */
-	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
-	.long	_brkpt_hw_int@h		/* Vector 3 - Breakpoint */
-	.long	_brkpt_sw_int@h		/* Vector 4 - Single step*/
-	.long	_def_xhandler@h		/* Vector 5 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 6 - future reserved */
-	.long	_def_xhandler@h		/* Vector 7 - future reserved */
-	.long	_def_xhandler@h		/* Vector 8 - future reserved */
-	.long	_def_xhandler@h		/* Vector 9 - future reserved */
-	.long	_def_xhandler@h		/* Vector 10 - future reserved */
-	.long	_def_xhandler@h		/* Vector 11 - future reserved */
-	.long	_def_xhandler@h		/* Vector 12 - future reserved */
-	.long	_def_xhandler@h		/* Vector 13 - future reserved */
-	.long	_def_xhandler@h		/* Vector 14 - future reserved */
-	.long	_def_xhandler@h		/* Vector 15 - future reserved */
-	.long	_def_xhandler@h		/* Vector 16 */
-	.long	_def_xhandler@h		/* Vector 17 */
-	.long	_def_xhandler@h		/* Vector 18 */
-	.long	_def_xhandler@h		/* Vector 19 */
-	.long	_def_xhandler@h		/* Vector 20 */
-	.long	_def_xhandler@h		/* Vector 21 */
-	.long	_def_xhandler@h		/* Vector 22 */
-	.long	_def_xhandler@h		/* Vector 23 */
-	.long	_def_xhandler@h		/* Vector 24 */
-	.long	_def_xhandler@h		/* Vector 25 */
-	.long	_def_xhandler@h		/* Vector 26 */
-	.long	_def_xhandler@h		/* Vector 27 */
-	.long	_def_xhandler@h		/* Vector 28 */
-	.long	_def_xhandler@h		/* Vector 29 */
-	.long	_def_xhandler@h		/* Vector 30 */
-	.long	_def_xhandler@h		/* Vector 31 */
-	.long	_def_xhandler@h		/* Vector 32 */
-	.long	_def_xhandler@h		/* Vector 33 */
-	.long	_def_xhandler@h		/* Vector 34 */
-	.long	_def_xhandler@h		/* Vector 35 */
-	.long	_def_xhandler@h		/* Vector 36 */
-	.long	_def_xhandler@h		/* Vector 37 */
-	.long	_def_xhandler@h		/* Vector 38 */
-	.long	_def_xhandler@h		/* Vector 39 */
-	.long	_def_xhandler@h		/* Vector 40 */
-	.long	_def_xhandler@h		/* Vector 41 */
-	.long	_def_xhandler@h		/* Vector 42 */
-	.long	_def_xhandler@h		/* Vector 43 */
-	.long	_def_xhandler@h		/* Vector 44 */
-	.long	_def_xhandler@h		/* Vector 45 */
-	.long	_def_xhandler@h		/* Vector 46 */
-	.long	_def_xhandler@h		/* Vector 47 */
-	.long	_def_xhandler@h		/* Vector 48 */
-	.long	_def_xhandler@h		/* Vector 49 */
-	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
-	.long	_def_xhandler@h		/* Vector 51 */
-	.long	_def_xhandler@h		/* Vector 52 */
-	.long	_def_xhandler@h		/* Vector 53 */
-	.long	_def_xhandler@h		/* Vector 54 */
-	.long	_def_xhandler@h		/* Vector 55 */
-	.long	_def_xhandler@h		/* Vector 56 */
-	.long	_def_xhandler@h		/* Vector 57 */
-	.long	_def_xhandler@h		/* Vector 58 */
-	.long	_def_xhandler@h		/* Vector 59 */
-	.long	_def_xhandler@h		/* Vector 60 */
-	.long	_def_xhandler@h		/* Vector 61 */
-	.long	_def_xhandler@h		/* Vector 62 */
-	.long	_def_xhandler@h		/* Vector 63 */
diff --git a/board/altera/dk1s10/Makefile b/board/altera/dk1s10/Makefile
deleted file mode 100644
index 60ac6e6b704..00000000000
--- a/board/altera/dk1s10/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o flash.o misc.o
-SOBJS  = vectors.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/dk1s10/config.mk b/board/altera/dk1s10/config.mk
deleted file mode 100644
index d200715f5fd..00000000000
--- a/board/altera/dk1s10/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003
-# Psyent Corporation
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x018c0000
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/dk1s10/dk1s10.c b/board/altera/dk1s10/dk1s10.c
deleted file mode 100644
index fb96501da21..00000000000
--- a/board/altera/dk1s10/dk1s10.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#if	defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#endif
-
-void _default_hdlr (void)
-{
-	printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if	defined(CONFIG_SEVENSEG)
-	/* init seven segment led display and switch off */
-	sevenseg_set(SEVENSEG_OFF);
-#endif
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("Board: Altera Nios 1S10 Development Kit\n");
-#if     defined(CONFIG_NIOS_SAFE_32)
-	puts ("Conf.: Altera Safe 32 (safe_32)\n");
-#elif   defined(CONFIG_NIOS_STANDARD_32)
-	puts ("Conf.: Altera Standard 32 (standard_32)\n");
-#elif   defined(CONFIG_NIOS_MTX_LDK_20)
-	puts ("Conf.: Microtronix LDK 2.0 (LDK2)\n");
-#endif
-
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/altera/dk1s10/flash.c b/board/altera/dk1s10/flash.c
deleted file mode 100644
index d1f2db13b00..00000000000
--- a/board/altera/dk1s10/flash.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*
- * include common flash code (for altera boards)
- */
-#include "../common/flash.c"
-
-/*---------------------------------------------------------------------*/
-#define BANKSZ	(8 * 1024 * 1024)
-#define SECTSZ	(64 * 1024)
-#define USERFLASH (2 * 1024 * 1024)	/* bottom 2 MB for user */
-
-/*---------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
-	int i;
-	unsigned long addr;
-	flash_info_t *fli = &flash_info[0];
-
-	fli->size = BANKSZ;
-	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
-
-	addr = CONFIG_SYS_FLASH_BASE;
-	for (i = 0; i < fli->sector_count; ++i) {
-		fli->start[i] = addr;
-		addr += SECTSZ;
-
-		/* Protect all but 2 MByte user area */
-		if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
-			fli->protect[i] = 0;
-		else
-			fli->protect[i] = 1;
-	}
-
-	return (BANKSZ);
-}
diff --git a/board/altera/dk1s10/misc.c b/board/altera/dk1s10/misc.c
deleted file mode 100644
index f25cdebd743..00000000000
--- a/board/altera/dk1s10/misc.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * board/altera/dk1s10/misc.c
- *
- * miscellaneous board interfaces / drivers
- */
-
-#include <common.h>
-
-#if	defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#include "../common/sevenseg.c"
-#endif
diff --git a/board/altera/dk1s10/u-boot.lds b/board/altera/dk1s10/u-boot.lds
deleted file mode 100644
index 50c3fe75a08..00000000000
--- a/board/altera/dk1s10/u-boot.lds
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  arch/nios/cpu/start.o (.text)
-	  *(.text)
-	}
-	__text_end = .;
-
-	. = ALIGN(4);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	}
-	__rodata_end = .;
-
-	. = ALIGN(4);
-	.data :
-	{
-		*(.data)
-	}
-	. = ALIGN(4);
-	__data_end = .;
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	__bss_start = .;
-	. = ALIGN(4);
-	.bss (NOLOAD) :
-	{
-		*(.bss)
-	}
-	. = ALIGN(4);
-	__bss_end = .;
-}
diff --git a/board/altera/dk1s10/vectors.S b/board/altera/dk1s10/vectors.S
deleted file mode 100644
index 226f65bb536..00000000000
--- a/board/altera/dk1s10/vectors.S
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- *	_cwp_lolimit	-Handles register window underflows.
- *	_cwp_hilimit	-Handles register window overflows.
- *	_timebase_int	-Increments the timebase.
- *	_def_xhandler	-Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
-	.data
-	.global _vectors
-	.align	4
-_vectors:
-
-#if	defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
-	/* OCI does the reset job */
-	.long	_def_xhandler@h		/* Vector 0  - NMI / Reset */
-#else
-	/* there is no OCI, so we have to do a direct reset jump here */
-	.long	CONFIG_SYS_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
-#endif
-	.long	_cwp_lolimit@h		/* Vector 1  - underflow */
-	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
-
-	.long	_def_xhandler@h		/* Vector 3 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 4 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 5 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 6 - future reserved */
-	.long	_def_xhandler@h		/* Vector 7 - future reserved */
-	.long	_def_xhandler@h		/* Vector 8 - future reserved */
-	.long	_def_xhandler@h		/* Vector 9 - future reserved */
-	.long	_def_xhandler@h		/* Vector 10 - future reserved */
-	.long	_def_xhandler@h		/* Vector 11 - future reserved */
-	.long	_def_xhandler@h		/* Vector 12 - future reserved */
-	.long	_def_xhandler@h		/* Vector 13 - future reserved */
-	.long	_def_xhandler@h		/* Vector 14 - future reserved */
-	.long	_def_xhandler@h		/* Vector 15 - future reserved */
-#if	(CONFIG_SYS_NIOS_TMRIRQ == 16)
-	.long	_timebase_int@h		/* Vector 16 - lopri timer*/
-#else
-	.long	_def_xhandler@h		/* Vector 16 */
-#endif
-	.long	_def_xhandler@h		/* Vector 17 */
-	.long	_def_xhandler@h		/* Vector 18 */
-	.long	_def_xhandler@h		/* Vector 19 */
-	.long	_def_xhandler@h		/* Vector 20 */
-	.long	_def_xhandler@h		/* Vector 21 */
-	.long	_def_xhandler@h		/* Vector 22 */
-	.long	_def_xhandler@h		/* Vector 23 */
-	.long	_def_xhandler@h		/* Vector 24 */
-	.long	_def_xhandler@h		/* Vector 25 */
-	.long	_def_xhandler@h		/* Vector 26 */
-	.long	_def_xhandler@h		/* Vector 27 */
-	.long	_def_xhandler@h		/* Vector 28 */
-	.long	_def_xhandler@h		/* Vector 29 */
-	.long	_def_xhandler@h		/* Vector 30 */
-	.long	_def_xhandler@h		/* Vector 31 */
-	.long	_def_xhandler@h		/* Vector 32 */
-	.long	_def_xhandler@h		/* Vector 33 */
-	.long	_def_xhandler@h		/* Vector 34 */
-	.long	_def_xhandler@h		/* Vector 35 */
-	.long	_def_xhandler@h		/* Vector 36 */
-	.long	_def_xhandler@h		/* Vector 37 */
-	.long	_def_xhandler@h		/* Vector 38 */
-	.long	_def_xhandler@h		/* Vector 39 */
-	.long	_def_xhandler@h		/* Vector 40 */
-	.long	_def_xhandler@h		/* Vector 41 */
-	.long	_def_xhandler@h		/* Vector 42 */
-	.long	_def_xhandler@h		/* Vector 43 */
-	.long	_def_xhandler@h		/* Vector 44 */
-	.long	_def_xhandler@h		/* Vector 45 */
-	.long	_def_xhandler@h		/* Vector 46 */
-	.long	_def_xhandler@h		/* Vector 47 */
-	.long	_def_xhandler@h		/* Vector 48 */
-	.long	_def_xhandler@h		/* Vector 49 */
-#if	(CONFIG_SYS_NIOS_TMRIRQ == 50)
-	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
-#else
-	.long	_def_xhandler@h		/* Vector 50 */
-#endif
-	.long	_def_xhandler@h		/* Vector 51 */
-	.long	_def_xhandler@h		/* Vector 52 */
-	.long	_def_xhandler@h		/* Vector 53 */
-	.long	_def_xhandler@h		/* Vector 54 */
-	.long	_def_xhandler@h		/* Vector 55 */
-	.long	_def_xhandler@h		/* Vector 56 */
-	.long	_def_xhandler@h		/* Vector 57 */
-	.long	_def_xhandler@h		/* Vector 58 */
-	.long	_def_xhandler@h		/* Vector 59 */
-	.long	_def_xhandler@h		/* Vector 60 */
-	.long	_def_xhandler@h		/* Vector 61 */
-	.long	_def_xhandler@h		/* Vector 62 */
-	.long	_def_xhandler@h		/* Vector 63 */
diff --git a/board/ssv/adnpesc1/Makefile b/board/ssv/adnpesc1/Makefile
deleted file mode 100644
index 40f04b81f02..00000000000
--- a/board/ssv/adnpesc1/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o flash.o misc.o
-SOBJS	:= vectors.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
deleted file mode 100644
index 802bfba1ab6..00000000000
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <nios-io.h>
-#include <spi.h>
-
-#if	defined(CONFIG_HW_WATCHDOG)
-extern void ssv_wd_pio_init(void);	/* comes from ../common/wd_pio.c
-					   included by ./misc.c */
-#endif
-
-void _default_hdlr (void)
-{
-	printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if	defined(CONFIG_HW_WATCHDOG)
-	ssv_wd_pio_init();
-#endif
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts (	"Board: SSV DilNetPC ADNP/ESC1"
-#if	defined(CONFIG_DNPEVA2)
-		" on DNP/EVA2"
-#endif
-		"\n");
-#if     defined(CONFIG_NIOS_BASE_32)
-	puts ("Conf.: SSV Base 32 (nios_32)\n");
-#endif
-
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	return (0);
-}
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#if defined(CONFIG_CMD_SPI) && CONFIG_NIOS_SPI
-
-#define	SPI_RTC_CS_MASK	0x00000001
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
-
-	spi->slaveselect = SPI_RTC_CS_MASK;	/* activate (1) */
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
-
-	spi->slaveselect = 0;			/* deactivate (0) */
-}
-
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/ssv/adnpesc1/config.mk b/board/ssv/adnpesc1/config.mk
deleted file mode 100644
index cf05445722b..00000000000
--- a/board/ssv/adnpesc1/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2004
-# Li-Pro.Net <www.li-pro.net>
-# Stephan Linz <linz@li-pro.net>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x02fc0000	# ATTENTION: notice your CONFIG_SYS_MONITOR_LEN setting
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/ssv/adnpesc1/flash.c b/board/ssv/adnpesc1/flash.c
deleted file mode 100644
index 882630c582c..00000000000
--- a/board/ssv/adnpesc1/flash.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*
- * include common flash code (for ssv boards)
- */
-#include "../common/flash.c"
-
-/*---------------------------------------------------------------------*/
-#define	BANKSZ	(8 * 1024 * 1024)
-#define	SECTSZ	(64 * 1024)
-#define	UBOOTSECS ((CONFIG_SYS_MONITOR_LEN + CONFIG_ENV_SIZE) / SECTSZ)
-#define	UBOOTAREA (UBOOTSECS * 64 * 1024)	/* monitor / env area */
-
-/*---------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
-	int i;
-	unsigned long addr;
-	flash_info_t *fli = &flash_info[0];
-
-	fli->size = BANKSZ;
-	fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	fli->flash_id = FLASH_MAN_AMD + FLASH_AMLV640U;
-
-	addr = CONFIG_SYS_FLASH_BASE;
-	for (i = 0; i < fli->sector_count; ++i) {
-		fli->start[i] = addr;
-		addr += SECTSZ;
-
-		/* Protect monitor / environment area */
-		if (addr <= (CONFIG_SYS_FLASH_BASE + UBOOTAREA))
-			fli->protect[i] = 1;
-		else
-			fli->protect[i] = 0;
-	}
-
-	return (BANKSZ);
-}
diff --git a/board/ssv/adnpesc1/misc.c b/board/ssv/adnpesc1/misc.c
deleted file mode 100644
index 1c5fcb9fcaf..00000000000
--- a/board/ssv/adnpesc1/misc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * board/ssv/adnpesc1/misc.c
- *
- * miscellaneous board interfaces / drivers
- */
-
-#include <common.h>
-
-#if	defined(CONFIG_STATUS_LED)
-#include "../common/cmd_sled.c"
-#endif
-
-#if	defined(CONFIG_HW_WATCHDOG)
-#include "../common/wd_pio.c"
-#endif
-
-#if	defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-#include "../common/post.c"
-#endif
diff --git a/board/ssv/adnpesc1/u-boot.lds b/board/ssv/adnpesc1/u-boot.lds
deleted file mode 100644
index 50c3fe75a08..00000000000
--- a/board/ssv/adnpesc1/u-boot.lds
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
-	.text :
-	{
-	  arch/nios/cpu/start.o (.text)
-	  *(.text)
-	}
-	__text_end = .;
-
-	. = ALIGN(4);
-	.rodata :
-	{
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	}
-	__rodata_end = .;
-
-	. = ALIGN(4);
-	.data :
-	{
-		*(.data)
-	}
-	. = ALIGN(4);
-	__data_end = .;
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-	}
-	. = ALIGN(4);
-	__u_boot_cmd_end = .;
-
-	__bss_start = .;
-	. = ALIGN(4);
-	.bss (NOLOAD) :
-	{
-		*(.bss)
-	}
-	. = ALIGN(4);
-	__bss_end = .;
-}
diff --git a/board/ssv/adnpesc1/vectors.S b/board/ssv/adnpesc1/vectors.S
deleted file mode 100644
index 8b2da2fed34..00000000000
--- a/board/ssv/adnpesc1/vectors.S
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- *	_cwp_lolimit	-Handles register window underflows.
- *	_cwp_hilimit	-Handles register window overflows.
- *	_timebase_int	-Increments the timebase.
- *	_def_xhandler	-Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
-	.data
-	.global _vectors
-	.align	4
-_vectors:
-
-#if	defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
-	/* OCI does the reset job */
-	.long	_def_xhandler@h		/* Vector 0  - NMI / Reset */
-#else
-	/* there is no OCI, so we have to do a direct reset jump here */
-	.long	CONFIG_SYS_NIOS_CPU_RST_VECT	/* Vector 0  - Reset to GERMS */
-#endif
-	.long	_cwp_lolimit@h		/* Vector 1  - underflow */
-	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
-
-	.long	_def_xhandler@h		/* Vector 3 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 4 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 5 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 6 - future reserved */
-	.long	_def_xhandler@h		/* Vector 7 - future reserved */
-	.long	_def_xhandler@h		/* Vector 8 - future reserved */
-	.long	_def_xhandler@h		/* Vector 9 - future reserved */
-	.long	_def_xhandler@h		/* Vector 10 - future reserved */
-	.long	_def_xhandler@h		/* Vector 11 - future reserved */
-	.long	_def_xhandler@h		/* Vector 12 - future reserved */
-	.long	_def_xhandler@h		/* Vector 13 - future reserved */
-	.long	_def_xhandler@h		/* Vector 14 - future reserved */
-	.long	_def_xhandler@h		/* Vector 15 - future reserved */
-#if	(CONFIG_SYS_NIOS_TMRIRQ == 16)
-	.long	_timebase_int@h		/* Vector 16 - lopri timer*/
-#else
-	.long	_def_xhandler@h		/* Vector 16 */
-#endif
-	.long	_def_xhandler@h		/* Vector 17 */
-	.long	_def_xhandler@h		/* Vector 18 */
-	.long	_def_xhandler@h		/* Vector 19 */
-	.long	_def_xhandler@h		/* Vector 20 */
-	.long	_def_xhandler@h		/* Vector 21 */
-	.long	_def_xhandler@h		/* Vector 22 */
-	.long	_def_xhandler@h		/* Vector 23 */
-	.long	_def_xhandler@h		/* Vector 24 */
-	.long	_def_xhandler@h		/* Vector 25 */
-	.long	_def_xhandler@h		/* Vector 26 */
-	.long	_def_xhandler@h		/* Vector 27 */
-	.long	_def_xhandler@h		/* Vector 28 */
-	.long	_def_xhandler@h		/* Vector 29 */
-	.long	_def_xhandler@h		/* Vector 30 */
-	.long	_def_xhandler@h		/* Vector 31 */
-	.long	_def_xhandler@h		/* Vector 32 */
-	.long	_def_xhandler@h		/* Vector 33 */
-	.long	_def_xhandler@h		/* Vector 34 */
-	.long	_def_xhandler@h		/* Vector 35 */
-	.long	_def_xhandler@h		/* Vector 36 */
-	.long	_def_xhandler@h		/* Vector 37 */
-	.long	_def_xhandler@h		/* Vector 38 */
-	.long	_def_xhandler@h		/* Vector 39 */
-	.long	_def_xhandler@h		/* Vector 40 */
-	.long	_def_xhandler@h		/* Vector 41 */
-	.long	_def_xhandler@h		/* Vector 42 */
-	.long	_def_xhandler@h		/* Vector 43 */
-	.long	_def_xhandler@h		/* Vector 44 */
-	.long	_def_xhandler@h		/* Vector 45 */
-	.long	_def_xhandler@h		/* Vector 46 */
-	.long	_def_xhandler@h		/* Vector 47 */
-	.long	_def_xhandler@h		/* Vector 48 */
-	.long	_def_xhandler@h		/* Vector 49 */
-#if	(CONFIG_SYS_NIOS_TMRIRQ == 50)
-	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
-#else
-	.long	_def_xhandler@h		/* Vector 50 */
-#endif
-	.long	_def_xhandler@h		/* Vector 51 */
-	.long	_def_xhandler@h		/* Vector 52 */
-	.long	_def_xhandler@h		/* Vector 53 */
-	.long	_def_xhandler@h		/* Vector 54 */
-	.long	_def_xhandler@h		/* Vector 55 */
-	.long	_def_xhandler@h		/* Vector 56 */
-	.long	_def_xhandler@h		/* Vector 57 */
-	.long	_def_xhandler@h		/* Vector 58 */
-	.long	_def_xhandler@h		/* Vector 59 */
-	.long	_def_xhandler@h		/* Vector 60 */
-	.long	_def_xhandler@h		/* Vector 61 */
-	.long	_def_xhandler@h		/* Vector 62 */
-	.long	_def_xhandler@h		/* Vector 63 */
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
deleted file mode 100644
index 449c1a49949..00000000000
--- a/board/ssv/common/cmd_sled.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <status_led.h>
-
-#if	defined(CONFIG_STATUS_LED)
-
-/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * !!!!!       Q u i c k   &   D i r t y   H a c k	 !!!!!
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * !!!!!						 !!!!!
- * !!!!! Next type definition was coming from original	 !!!!!
- * !!!!! status LED driver drivers/misc/status_led.c	 !!!!!
- * !!!!! and should be exported for using it here.	 !!!!!
- * !!!!!						 !!!!!
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
-
-typedef struct {
-	led_id_t mask;
-	int state;
-	int period;
-	int cnt;
-} led_dev_t;
-
-extern led_dev_t led_dev[];
-
-#if defined(CONFIG_CMD_BSP)
-int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	int led_id = 0;
-
-	if (argc > 1) {
-#ifdef	STATUS_LED_BOOT
-		if (!strcmp (argv[1], "boot")) {
-			led_id = STATUS_LED_BOOT + 1;
-		}
-#endif
-#ifdef	STATUS_LED_RED
-		if (!strcmp (argv[1], "red")) {
-			led_id = STATUS_LED_RED + 1;
-		}
-#endif
-#ifdef	STATUS_LED_YELLOW
-		if (!strcmp (argv[1], "yellow")) {
-			led_id = STATUS_LED_YELLOW + 1;
-		}
-#endif
-#ifdef	STATUS_LED_GREEN
-		if (!strcmp (argv[1], "green")) {
-			led_id = STATUS_LED_GREEN + 1;
-		}
-#endif
-	}
-
-	switch (argc) {
-	case 1:
-#if	(STATUS_LED_BITS > 3)
-		for (; led_id < 4; led_id++)
-#elif	(STATUS_LED_BITS > 2)
-		for (; led_id < 3; led_id++)
-#elif	(STATUS_LED_BITS > 1)
-		for (; led_id < 2; led_id++)
-#elif	(STATUS_LED_BITS > 0)
-		for (; led_id < 1; led_id++)
-#else
-#error "*** STATUS_LED_BITS not correct defined ***"
-#endif
-		{
-			printf ("Status LED '%s' is %s\n",
-				led_id == STATUS_LED_BOOT ? "boot"
-				: led_id == STATUS_LED_RED ? "red"
-				: led_id == STATUS_LED_YELLOW ? "yellow"
-				: led_id ==
-				STATUS_LED_GREEN ? "green" : "unknown",
-				led_dev[led_id].state ==
-				STATUS_LED_ON ? "on" : led_dev[led_id].
-				state ==
-				STATUS_LED_OFF ? "off" : led_dev[led_id].
-				state ==
-				STATUS_LED_BLINKING ? "blinking" : "unknown");
-		}
-		return 0;
-	case 2:
-		if (led_id) {
-			printf ("Status LED '%s' is %s\n", argv[1],
-				led_dev[led_id - 1].state ==
-				STATUS_LED_ON ? "on" : led_dev[led_id -
-							       1].state ==
-				STATUS_LED_OFF ? "off" : led_dev[led_id -
-								 1].state ==
-				STATUS_LED_BLINKING ? "blinking" : "unknown");
-			return 0;
-		} else
-			break;
-	case 3:
-		if (led_id) {
-			if (!strcmp (argv[2], "on")) {
-				status_led_set (led_id - 1, STATUS_LED_ON);
-				return 0;
-			} else if (!strcmp (argv[2], "off")) {
-				status_led_set (led_id - 1, STATUS_LED_OFF);
-				return 0;
-			} else if (!strcmp (argv[2], "blink")) {
-				status_led_set (led_id - 1,
-						STATUS_LED_BLINKING);
-				return 0;
-			} else
-				break;
-		} else
-			break;
-	default:
-		break;
-	}
-	cmd_usage(cmdtp);
-	return 1;
-}
-
-#ifdef	STATUS_LED_BOOT
-#ifdef	STATUS_LED_RED
-#ifdef	STATUS_LED_YELLOW
-#ifdef	STATUS_LED_GREEN
-#define __NAME_STR		"    - name: boot|red|yellow|green\n"
-#else
-#define __NAME_STR		"    - name: boot|red|yellow\n"
-#endif
-#else
-#define __NAME_STR		"    - name: boot|red\n"
-#endif
-#else
-#define __NAME_STR		"    - name: boot\n"
-#endif
-#else
-#define __NAME_STR		"    - name: (no such defined)\n"
-#endif
-
-U_BOOT_CMD (sled, 3, 0, do_sled,
-	    "check and set status led",
-	    "sled [name [state]]\n" __NAME_STR "    - state: on|off|blink");
-#endif
-#endif	/* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/flash.c b/board/ssv/common/flash.c
deleted file mode 100644
index 70bf9d678ad..00000000000
--- a/board/ssv/common/flash.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <nios.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*--------------------------------------------------------------------*/
-void flash_print_info (flash_info_t * info)
-{
-	int i, k;
-	unsigned long size;
-	int erased;
-	volatile unsigned char *flash;
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-
-		/* Check if whole sector is erased */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned char *) info->start[i];
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xff) {
-				erased = 0;
-				break;
-			}
-		}
-
-		/* Print the info */
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s%s", info->start[i], erased ? " E" : "  ",
-			info->protect[i] ? "RO " : "   ");
-	}
-	printf ("\n");
-}
-
-/*-------------------------------------------------------------------*/
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
-	int prot, sect, wait;
-	unsigned oldpri;
-	ulong start;
-
-	/* Some sanity checking */
-	if ((s_first < 0) || (s_first > s_last)) {
-		printf ("- no sectors to erase\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-#ifdef DEBUG
-	for (sect = s_first; sect <= s_last; sect++) {
-		printf("- Erase: Sect: %i @ 0x%08x\n", sect,  info->start[sect]);
-	}
-#endif
-
-	/* NOTE: disabling interrupts on Nios can be very bad since it
-	 * also disables the LO_LIMIT exception. It's better here to
-	 * set the interrupt priority to 3 & restore it when we're done.
-	 */
-	oldpri = ipri (3);
-
-	/* It's ok to erase multiple sectors provided we don't delay more
-	 * than 50 usec between cmds ... at which point the erase time-out
-	 * occurs. So don't go and put printf() calls in the loop ... it
-	 * won't be very helpful ;-)
-	 */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
-			*addr = 0xf0;
-			*(addr+0xAAA/2) = 0xaa;
-			*(addr+0x554/2) = 0x55;
-			*(addr+0xAAA/2) = 0x80;
-			*(addr+0xAAA/2) = 0xaa;
-			*(addr+0x554/2) = 0x55;
-			*addr2 = 0x30;
-			/* Now just wait for 0xffff & provide some user
-			 * feedback while we wait. Here we have to grant
-			 * timer interrupts. Otherwise get_timer() can't
-			 * work right. */
-			ipri(oldpri);
-			start = get_timer (0);
-			while (*addr2 != 0xffff) {
-				for (wait = 8; wait; wait--) {
-					udelay (125 * 1000);
-				}
-				putc ('.');
-				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("timeout\n");
-					return 1;
-				}
-			}
-			oldpri = ipri (3); /* disallow non important irqs again */
-		}
-	}
-
-	printf ("\n");
-	*addr = 0xf0;
-
-	/* Restore interrupt priority */
-	ipri (oldpri);
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * srcbuffer, ulong addr, ulong cnt)
-{
-
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *cmd = (vu_short *) info->start[0];
-	volatile CONFIG_SYS_FLASH_WORD_SIZE *dst = (vu_short *) addr;
-	CONFIG_SYS_FLASH_WORD_SIZE *src = (void *) srcbuffer;
-	CONFIG_SYS_FLASH_WORD_SIZE b;
-	unsigned oldpri;
-	ulong start;
-
-	cnt /= sizeof(CONFIG_SYS_FLASH_WORD_SIZE);
-	while (cnt) {
-		/* Check for sufficient erase */
-		b = *src;
-		if ((*dst & b) != b) {
-			printf ("%02x : %02x\n", *dst, b);
-			return (2);
-		}
-
-		/* Disable interrupts other than window underflow
-		 * (interrupt priority 2)
-		 */
-		oldpri = ipri (3);
-		*(cmd+0xAAA/2) = 0xaa;
-		*(cmd+0x554/2) = 0x55;
-		*(cmd+0xAAA/2) = 0xa0;
-		ipri (oldpri);
-		*dst = b;
-
-		/* Verify write */
-		start = get_timer (0);
-		while (*dst != b) {
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				*cmd = 0xf0;
-				return 1;
-			}
-		}
-		dst++;
-		src++;
-		cnt--;
-	}
-
-	*cmd = 0xf0;
-	return (0);
-}
diff --git a/board/ssv/common/post.c b/board/ssv/common/post.c
deleted file mode 100644
index c7a9ccc89ee..00000000000
--- a/board/ssv/common/post.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if !defined(CONFIG_SYS_NIOS_POST_WORD_ADDR)
-#error "*** CONFIG_SYS_NIOS_POST_WORD_ADDR not defined ***"
-#endif
-
-void post_word_store (ulong a)
-{
-	volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
-	*(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
-	return *(volatile ulong *) save_addr;
-}
-
-#endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
deleted file mode 100644
index eaf1d2526c9..00000000000
--- a/board/ssv/common/wd_pio.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <nios.h>
-#include <nios-io.h>
-
-#if	defined(CONFIG_HW_WATCHDOG)
-
-#if !defined(CONFIG_HW_WDENA_BASE)
-#error "*** CONFIG_HW_WDENA_BASE not defined ***"
-#if !defined(CONFIG_HW_WDENA_BIT)
-#error "*** CONFIG_HW_WDENA_BIT not defined ***"
-#endif
-#endif
-
-#if !defined(CONFIG_HW_WDTOG_BASE)
-#error "*** CONFIG_HW_WDTOG_BASE not defined ***"
-#if !defined(CONFIG_HW_WDTOG_BIT)
-#error "*** CONFIG_HW_WDTOG_BIT not defined ***"
-#endif
-#endif
-
-#ifdef	CONFIG_HW_WDPORT_WRONLY	/* emulate read access */
-static unsigned __wd_ena_pio_portval = 0;
-#endif
-
-#define	WD_PIO_INIT_DONE(V)	((V) & (1 << CONFIG_HW_WDENA_BIT))
-
-void ssv_wd_pio_init(void)
-{
-	nios_pio_t *ena_piop	 = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-	nios_pio_t *trg_piop	 = (nios_pio_t*)CONFIG_HW_WDTOG_BASE;
-
-	trg_piop->data		&= ~(1 << CONFIG_HW_WDTOG_BIT);
-
-#ifdef	CONFIG_HW_WDPORT_WRONLY	/* emulate read access */
-
-	__wd_ena_pio_portval	|= (1 << CONFIG_HW_WDENA_BIT);
-	ena_piop->data		 = __wd_ena_pio_portval;
-
-#else	/* !CONFIG_HW_WDPORT_WRONLY */
-
-	trg_piop->direction	|= (1 << CONFIG_HW_WDTOG_BIT);
-
-	ena_piop->data		|= (1 << CONFIG_HW_WDENA_BIT);
-	ena_piop->direction	|= (1 << CONFIG_HW_WDENA_BIT);
-
-#endif	/* CONFIG_HW_WDPORT_WRONLY */
-}
-
-void ssv_wd_pio_done(void)
-{
-	nios_pio_t *piop	 = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-
-#ifdef	CONFIG_HW_WDPORT_WRONLY	/* emulate read access */
-
-	__wd_ena_pio_portval	&= ~(1 << CONFIG_HW_WDENA_BIT);
-	piop->data		 = __wd_ena_pio_portval;
-
-#else	/* !CONFIG_HW_WDPORT_WRONLY */
-
-	piop->data		&= ~(1 << CONFIG_HW_WDENA_BIT);
-
-#endif	/* CONFIG_HW_WDPORT_WRONLY */
-}
-
-void ssv_wd_pio_reset(void)
-{
-	nios_pio_t *trg_piop	 = (nios_pio_t*)CONFIG_HW_WDTOG_BASE;
-
-#ifdef	CONFIG_HW_WDPORT_WRONLY
-	if (WD_PIO_INIT_DONE(__wd_ena_pio_portval))
-#else
-	nios_pio_t *ena_piop	 = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-
-	if (WD_PIO_INIT_DONE(ena_piop->data))
-#endif
-	{
-		trg_piop->data	|=  (1 << CONFIG_HW_WDTOG_BIT);
-		trg_piop->data	&= ~(1 << CONFIG_HW_WDTOG_BIT);
-	}
-}
-
-void hw_watchdog_reset(void)
-{
-	int re_enable = disable_interrupts ();
-
-	ssv_wd_pio_reset();
-	if (re_enable)
-		enable_interrupts ();
-}
-
-#if defined(CONFIG_CMD_BSP)
-int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	nios_pio_t *ena_piop	 = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-
-	switch (argc)
-	{
-	case 1:
-		printf ("Watchdog timer status is %s\n",
-#ifdef	CONFIG_HW_WDPORT_WRONLY
-				WD_PIO_INIT_DONE(__wd_ena_pio_portval)
-#else
-				WD_PIO_INIT_DONE(ena_piop->data)
-#endif
-				? "on" : "off");
-		return 0;
-	case 2:
-		if (!strcmp(argv[1],"on"))
-		{
-			ssv_wd_pio_init();
-			printf("Watchdog timer now is on\n");
-			return 0;
-		}
-		else if (!strcmp(argv[1],"off"))
-		{
-			ssv_wd_pio_done();
-			printf("Watchdog timer now is off\n");
-			return 0;
-		}
-		break;
-	default:
-		break;
-	}
-	cmd_usage(cmdtp);
-	return 1;
-}
-
-U_BOOT_CMD(
-	wd,	2,	1,	do_wd,
-	"check and set watchdog",
-	"on   - switch watchDog on\n"
-	"wd off  - switch watchdog off\n"
-	"wd      - print current status"
-);
-#endif
-#endif	/* CONFIG_HW_WATCHDOG */
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index d22eb6634a3..a0f7998f61f 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -119,25 +119,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return 0;
 }
 
-#elif defined(CONFIG_NIOS) /* NIOS*/
-
-int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	bd_t *bd = gd->bd;
-
-	print_num ("memstart",		(ulong)bd->bi_memstart);
-	print_lnum ("memsize",		(u64)bd->bi_memsize);
-	print_num ("flashstart",	(ulong)bd->bi_flashstart);
-	print_num ("flashsize",		(ulong)bd->bi_flashsize);
-	print_num ("flashoffset",	(ulong)bd->bi_flashoffset);
-
-	print_eth(0);
-	printf ("ip_addr     = %pI4\n", &bd->bi_ip_addr);
-	printf ("baudrate    = %ld bps\n", bd->bi_baudrate);
-
-	return 0;
-}
-
 #elif defined(CONFIG_NIOS2) /* Nios-II */
 
 int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index da060098af1..880320211ee 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -174,8 +174,6 @@ void arch_preboot_os(void) __attribute__((weak, alias("__arch_preboot_os")));
   #define IH_INITRD_ARCH IH_ARCH_MICROBLAZE
 #elif defined(__mips__)
   #define IH_INITRD_ARCH IH_ARCH_MIPS
-#elif defined(__nios__)
-  #define IH_INITRD_ARCH IH_ARCH_NIOS
 #elif defined(__nios2__)
   #define IH_INITRD_ARCH IH_ARCH_NIOS2
 #elif defined(__PPC__)
diff --git a/common/image.c b/common/image.c
index 8d4be140f69..2b6007e9c66 100644
--- a/common/image.c
+++ b/common/image.c
@@ -84,7 +84,6 @@ static table_entry_t uimage_arch[] = {
 	{	IH_ARCH_MICROBLAZE,	"microblaze",	"MicroBlaze",	},
 	{	IH_ARCH_MIPS,		"mips",		"MIPS",		},
 	{	IH_ARCH_MIPS64,		"mips64",	"MIPS 64 Bit",	},
-	{	IH_ARCH_NIOS,		"nios",		"NIOS",		},
 	{	IH_ARCH_NIOS2,		"nios2",	"NIOS II",	},
 	{	IH_ARCH_PPC,		"powerpc",	"PowerPC",	},
 	{	IH_ARCH_PPC,		"ppc",		"PowerPC",	},
diff --git a/config.mk b/config.mk
index c4ad223bfac..bcda77611a8 100644
--- a/config.mk
+++ b/config.mk
@@ -191,14 +191,6 @@ endif
 
 CFLAGS += $(call cc-option,-fno-stack-protector)
 
-# avoid trigraph warnings while parsing pci.h (produced by NIOS gcc-2.9)
-# this option have to be placed behind -Wall -- that's why it is here
-ifeq ($(ARCH),nios)
-ifeq ($(findstring 2.9,$(shell $(CC) --version)),2.9)
-CFLAGS := $(CPPFLAGS) -Wall -Wno-trigraphs
-endif
-endif
-
 # $(CPPFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
 # option to the assembler.
 AFLAGS_DEBUG :=
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
deleted file mode 100644
index f9566b8ee87..00000000000
--- a/doc/README.adnpesc1
+++ /dev/null
@@ -1,235 +0,0 @@
-
-	      SSV ADNP/ESC1 Embedded Softcore Computing
-		 Nios Softcore, Altera Cyclone FPGA
-
-		    Last Update: February 27, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the SSV Embedded
-Nios Softcore Computing platform ADNP/ESC1. For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1s10,
-the Altera DK-1S10 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
-	1. Files
-	2. Memory Organization
-	3. CPU Variations
-	4. Examples
-	5. Programming U-Boot into FLASH with GERMS
-	6. Autoboot
-	7. U-Boot environment convention and update philosophy
-
-====================================================================
-
-1. Files
-=========
-	board/ssv/adnpesc1/*
-	include/configs/ADNPESC1.h
-	include/configs/ADNPESC1_base_32.h
-
-
-2. Memory Organization
-=======================
-
-For the most part, you can put things pretty much anywhere.
-This is pretty flexible for Nios. So here we make some arbitrary
-choices & assume that the monitor is placed at the end of a memory
-resource. So you must make sure TEXT_BASE is chosen appropriately.
-This is very important if you plan to move your memory to another
-place as configured at this time!
-
-	-The heap is placed below the monitor (U-Boot code).
-	-Global data is placed below the heap.
-	-The stack is placed below global data (&grows down).
-
-(see doc/README.adnpesc1_base32 too)
-
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the ADNP/ESC1 possible.
-U-Boot supports the following CPU configurations:
-
-	- SSV Basis 32 (make ADNPESC1_base_32_config)
-	- SSV Basis 32 at DNP evaluation base board 2
-	  (make ADNPESC1_DNPEVA2_base_32_config)
-
-
-4. Examples
-============
-
-The hello_world example works fine. To try out you have to change
-the default load address from 0x0100_0000 to 0x0204_0000 in
-examples/Makefile (the real SDRAM for default board configuration).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-
-The current version of the ADNP/ESC1 port with the default
-configuration settings occupies about 97 KBytes of flash.
-A minimal configuration occupies less than 70 KByte
-(network, SPI, POST and board command support disabled). You
-can save more memory by deactivating the Hu-Shell support and
-long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
-
-To program U-Boot into the ADNP/ESC1 flash using GERMS do the
-following:
-
-1. Download U-Boot to its target run space in SDRAM:
-
-   a. Close jumper RCM_EN# and push the reset button.
-
-   b. From the command line, download U-Boot using the
-      nios-run:
-
-	$ nios-run -r u-boot.srec
-
-      NOTE: In some cases this want fail. I don't know why,
-	    but try again.
-
-This takes about 1 minute (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
-    U-Boot 1.0.2 (Jan 30 2004 - 12:59:15)
-
-    CPU: Nios-32 Rev. 3.3 (0x3038)
-    Reg file size: 512 LO_LIMIT/HI_LIMIT: 1/30
-    Board: SSV DilNetPC ADNP/ESC1
-    Conf.: SSV Base 32 (nios_32)
-    In:    serial
-    Out:   serial
-    Err:   serial
-    ADNPESC1 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
-   Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
-   following:
-
-   a. From the u-boot command prompt start a binary download to SDRAM:
-
-      at the SSV Basis 32 to SDRAM:
-
-	==> loadb 2000100
-
-   b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
-   at the SSV Basis 32 from 0x1000000 to 0x103ffff:
-
-	==> protect off 1:0-3
-	==> erase 1:0-3
-
-5. Copy the binary image from SDRAM to flash:
-
-   at the SSV Basis 32 from SDRAM:
-
-	==> cp.b 2000100 1000000 $filesize
-
-U-Boot will now automatically start when the board is powered on or
-reset using the SSV Basis 32 configuration without closed RCM jumper.
-To start U-Boot with closed RCM Jumper, enter the following GERMS
-command:
-
-    + g 1000000
-
-
-6. Autoboot
-===========
-
-U-Boot will try to boot a valid Nios application from Flash. For this
-it will use the deposited Hu-Shell script in environment variable
-'bootcmd' which is looking for a valid Nios application identifier
-string in Flash and go on at even its entry address. For more
-information see the next chapter.
-
-
-7. U-Boot environment convention and update philosophy
-======================================================
-
-U-Boot for the SSV ADNP/ESC1 target knows about many environment
-variables used to control the startup process, update process for
-raw Nios applications, and optionally file system image updates.
-In default configuration there are two Hu-Shell scripts to update
-the Nios application and/or the file system image:
-
-1. Update Nios application (ex. the uCLinux kernel):
-
-	run 'appl_update'
-
-2. Update optional file system image (ex. RomFS image used by uCLinux):
-
-	run 'fs_update'
-
-The Nios application can be any programm code generated in relation
-to the Nios application identifier -- the string "Nios" at offset
-address 0x0c. To use the scripts like described above in a secure way
-you have to check-up the next environment variables:
-
-1. update_allowed
-
-	- Update switch -- must be set to '1' (one) to allow any update
-	- default is '0' (zero)
-
-	  NOTE:	You should avoid to save this variable with non zero
-		value to Flash. Otherwise it would be allow any
-		update process at any time!
-
-2. appl_entry_addr
-
-	- Nios application area start address (usually in Flash)
-	- this is the startup address for autoboot
-	- each Nios application code we want to update will be copied
-	  to this address
-	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
-
-3. appl_end_addr
-
-	- Nios application area end address (usually in Flash)
-	- will be used to unprotect/erase the Flash area while updating
-	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
-
-4. appl_ident_addr
-
-	- address of the Nios application identification string
-	- this is the address checked-up by autoboot
-	- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
-
-5. appl_ident_str
-
-	- the Nios application identification string itself
-	- default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
-
-6. appl_name
-
-	- name of file we have to download/update
-	- default is ADNPESC1/base32/linux.bin
-
-7. fs_base_addr
-
-	- optionally file system area start address (usually in Flash)
-	- each file system we want to update will be copied to this address
-	- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
-
-8. fs_end_addr
-
-	- optionally file system area end address (usually in Flash)
-	- will be used to unprotect/erase the Flash area while updating
-	- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
-
-9. fs_name
-
-	- name of file we have to download/update
-	- default is ADNPESC1/base32/romfs.img
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
deleted file mode 100644
index e6fb7a47dfc..00000000000
--- a/doc/README.adnpesc1_base32
+++ /dev/null
@@ -1,469 +0,0 @@
-
-TODO:	specify IDE i/f
-
-
-===============================================================================
-	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU:	"DNP_ESC1"
-	32 bit NIOS for 50 MHz
-	512 Byte for register file (30 levels)
-	with out instruction cache
-	with out data cache
-	2 KByte On Chip ROM with GERMS boot monitor
-	with out On Chip RAM
-	MSTEP multiplier
-	no Debug Core
-	no On Chip Instrumentation (OCI)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
-			CONFIG_SYS_NIOS_CPU_ICACHE	     = (not present)
-			CONFIG_SYS_NIOS_CPU_DCACHE	     = (not present)
-			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 512
-			CONFIG_SYS_NIOS_CPU_MUL	     = 0
-			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
-			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
-
-IRQ:	 Nr.  | used by
-	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
-	 17   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 17
-	 18   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 18
-	 20   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   =
-	      | PIO6	  |  CONFIG_SYS_NIOS_CPU_PIO6_IRQ   = 20
-	 25   | SPI0	  |  CONFIG_SYS_NIOS_CPU_SPI0_IRQ   = 25
-	 31   | PIO7	  |  CONFIG_SYS_NIOS_CPU_PIO7_IRQ   = 31
-	 32   | PIO8	  |  CONFIG_SYS_NIOS_CPU_PIO8_IRQ   = 32
-	 33   | PIO9	  |  CONFIG_SYS_NIOS_CPU_PIO9_IRQ   = 33
-	 34   | PIO10	  |  CONFIG_SYS_NIOS_CPU_PIO10_IRQ  = 34
-	 35   | PIO11	  |  CONFIG_SYS_NIOS_CPU_PIO11_IRQ  = 35
-	 36   | PIO12	  |  CONFIG_SYS_NIOS_CPU_PIO12_IRQ  =
-	      | IDE0	  |  CONFIG_SYS_NIOS_CPU_IDE0_IRQ   = 36
-	 37   | PIO13	  |  CONFIG_SYS_NIOS_CPU_PIO13_IRQ  =
-	      | IDE1	  |  CONFIG_SYS_NIOS_CPU_IDE1_IRQ   = 37
-
-MEMORY:	 8 MByte Flash
-	16 MByte SDRAM
-
-Timer:	TIMER0: high priority programmable timer (IRQ16)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
-			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = (not present)
-
-PIO:	 Nr.  | description
-	------+--------------------------------------------------------
-	 PIO0 | PORTA:      8 in/outputs for general purpose usage
-	 PIO1 | PORTB:      8 in/outputs for general purpose usage
-	 PIO2 | PORTC:      4 in/outputs for general purpose usage
-	 PIO3 | RCM:	    1 input for RCM_EN# jumper (Req.Conf.Mon.)
-	 PIO4 | WDTENA:	    1 output to enable the on-board watchdog
-	 PIO5 | WDTTRIG:    1 output to trigger the on-board watchdog
-	 PIO6 | LAN0INT:    1 input for LAN91C111 irq input (IRQ20)
-	 PIO7 | INT1:	    1 input for general purpose irq (IRQ31)
-	 PIO8 | INT2:	    1 input for general purpose irq (IRQ32)
-	 PIO9 | INT3:	    1 input for general purpose irq (IRQ33)
-	 PIO10| INT4:	    1 input for general purpose irq (IRQ34)
-	 PIO11| INT5:	    1 input for general purpose irq (IRQ35)
-	 PIO12| INT6:	    1 input for general purpose irq (IRQ36)
-	      | IDE0INT:     (same) for IDE0 irq input
-	 PIO13| INT7:	    1 input for general purpose irq (IRQ37)
-	      | IDE1INT:     (same) for IDE1 irq input
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_PORTA_PIO	     = 0
-			CONFIG_SYS_NIOS_CPU_PORTB_PIO	     = 1
-			CONFIG_SYS_NIOS_CPU_PORTC_PIO	     = 2
-			CONFIG_SYS_NIOS_CPU_RCM_PIO	     = 3
-			CONFIG_SYS_NIOS_CPU_WDTENA_PIO	     = 4
-			CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO     = 5
-			CONFIG_SYS_NIOS_CPU_LED_PIO	     = (not present)
-
-UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17)
-	UART1: fixed baudrate of 115200, fixed protocol 8N1,
-	       without handshake RTS/CTS (IRQ18)
-
-SPI:	SPI0: master capable, 1 slave selectable, 250kHz target clock,
-	      2 usec targets delay between slave select and clock,
-	      data is transferred MSB-first / LSB-last (IRQ25)
-
-LAN:	SMsC LAN91C111 with:
-	  - without offset
-	  - data bus width 16 bit (on-board hard wired at 32 bit bus)
-	  - !!! 32 bit bus access --> each address * 2 !!!
-
-IDE:	(TODO)
-
-
-===============================================================================
-	M E M O R Y   M A P
-===============================================================================
-
-- - - - - - - - - - -  external extension - - - - - - - - - - - - - - - - - - -
-
-  0x44000000 ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  EXT3 (CS4)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS3_SIZE
-	       :   unknown)    :	       : |   = 0x01000000
-	       |	       |	       | /
-  0x43000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS3_BASE
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  EXT2 (CS3)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS2_SIZE
-	       :   unknown)    :	       : |   = 0x01000000
-	       |	       |	       | /
-  0x42000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS2_BASE
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  EXT1 (CS2)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS1_SIZE
-	       :   unknown)    :	       : |   = 0x01000000
-	       |	       |	       | /
-  0x41000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS1_BASE
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  EXT0 (CS1)   :   and content :	       :  > CONFIG_SYS_NIOS_CPU_CS0_SIZE
-	       :   unknown)    :	       : |   = 0x01000000
-	       |	       |	       | /
-  0x40000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_CS0_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -   external memory   - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x03000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_STACK
-	       |	       .	       | \
-	       |	       .	       | |  (U-Boot run-time system)
-	       |	       .	       | |
-	       |	       .	       |  > CONFIG_SYS_MONITOR_LEN
-	       |	       .	       | |   = 0x00040000
-	       |	       .	       | |
-	       |	       .	       | /
-  0x02fc0000 --+32-----------16|15------------0+    TEXT_BASE
-	       |	       .	       | \
-	       |	       .	       |  > CONFIG_SYS_MALLOC_LEN (heap)
-	       |	       .	       | /
-	     --+32-----------16|15------------0+
-	       |	       .	       | \
-	       |	       .	       |  > CONFIG_SYS_GBL_DATA_SIZE (global)
-	       |	       .	       | /
-	     --+32-----------16|15------------0+    CONFIG_SYS_INIT_SP (u-boot stack)
-	       |	       .	       | \ \
-	       |	       .	       | | |
-	       |	       .	       | |  > stack area
-	       |	       .	       | | |
-	       |	       .	       | | V
-	       |	       .	       | |
-	       |	       .	       | |
-  SDRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-	       |	       .	       | |   = 0x01000000
-	       |	       .	       | |
-  0x02000100   |- - - - - - - - - - - - - - - -+-|-
-	       |	       .	       | | \
-	       |	       .	       | | |
-	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
-	       |	       .	       | | |   = 0x00000100
-	       |			       | / /
-  0x02000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
-  0x02000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-	       |			       | \
-	       :	      gap	       :  > (space for 2nd Flash)
-	       |			       | /
-  0x01800000 ---32-----------16|15------------0-
-	       |  sector 127		       | \
-    + 0x7f0000 |- - - - - - - - - - - - - - - -| |
-	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-	       |  sector 1     :	       | |   = 0x00800000
-    + 0x010000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 0 (size = 0x10000)    | /
-  0x01000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00010020 ---32-----------16|15------------0-
-	       |			       | \
-	       |  register bank		       | |
-	       |   size = (real_size << 1)     | |
-	       |   real_size = 0x10	       | |
-	       | +--------.---.---.---	       | |
-	       | | bank 0 \ 1 \ 2 \ 3 \	       | |
-	       | |---------------------------+ | |
-  LAN91C111    | | BANK	       | RESERVED    | |  > na_enet_size
-	       | |- - - - - - -|- - - - - - -| | |   = 0x00000020
-	       | | RPCR	       | MIR	     | | |
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | COUNTER     | RCR	     | | |
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | EPH STATUS  | TCR	     | | |
-	       | +---------------------------+ | /
-  0x00010000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00001040 ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :	       :	       : |
-  IDE1 i/f     :	       :	       :  > 0x00000020
-  [5]	       :	       :	       : |
-	       |	       |	       | /
-  0x00001020 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE1
-	       |	       |	       | \
-	       :	       :	       : |
-  IDE0 i/f     :	       :	       :  > 0x00000020
-  [5]	       :	       :	       : |
-	       |	       |	       | /
-  0x00001000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
-	       |			       |
-	       :	      gap	       :
-	       |			       |
-  0x00000980 ---32-----------16|15------------0-
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO13        |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO13
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO12        |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO12
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO11        |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000950 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO11
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO10        |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO10
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO9         |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000930 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO9
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO8         |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000920 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO8
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO7         |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000910 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO6         |  interruptmask (1 bit)	 (rw)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
-	       |			       |
-	       :	      gap	       :
-	       |			       |
-  0x000008e0 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |  endofpacket (16 bit)	 (rw)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  slaveselect (1 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  SPI0	       |		   (reserved)  | |
-  [4]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  control (11 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (9 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (16 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (16 bit)	 (ro)  | /
-  0x000008c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SPI0
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO5	       |		     (unused)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x000008b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO4	       |		     (unused)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x000008a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO3	       |		     (unused)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x00000890 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO2	       |		     (unused)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (4 bit)      (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (4 bit)		 (rw)  | /
-  0x00000880 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO1	       |		     (unused)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (8 bit)      (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (8 bit)		 (rw)  | /
-  0x00000870 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO0	       |		     (unused)  | |
-  [3]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (8 bit)      (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (8 bit)		 (rw)  | /
-  0x00000860 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  snaph (16 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER0       |  snapl (16 bit)	 (rw)  | |
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  periodh (16 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  periodl (16 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (4 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x00000840 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART1	       |		     (unused)  |  > 0x00000020
-  [1]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000820 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
-  [1]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000800 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
-
-  0x00000800 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
-	       |	       :	       | |   = 0x00000800
-	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
-  0x00000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-
-===============================================================================
-	F L A S H   M E M O R Y	  A L L O C A T I O N
-===============================================================================
-
-  0x01800000 ---8-------------4|3-------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       |  > 6 MByte ROM FS
-	       |	       :	       | |
-	       |	       :	       | /
-  0x01200000 --+- - - - - - - -:- - - - - - - -+- - file system image(s)
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       |  > 1728 kByte ucLinux
-	       |	       :	       | |
-	       |	       :	       | /
-  0x01050000 --+- - - - - - - -:- - - - - - - -+- - os image(s)
-	       |	       :	       | \
-  0x01040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
-	       |	       :	       | |
-	       |	       :	       |  > 320 kByte U-Boot
-	       |	       :	       | |
-	       |	       :	       | |
-	       |	       :	       | /
-  0x01000000 --+- - - - - - - -:- - - - - - - -+- - u-boot _start()
-  0x01000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[5]	http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1c20 b/doc/README.dk1c20
deleted file mode 100644
index 3c0e41bf7d6..00000000000
--- a/doc/README.dk1c20
+++ /dev/null
@@ -1,153 +0,0 @@
-
-			 Nios Development Kit
-			   Cyclone Editions
-
-		    Last Update: January 2, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios Development Kit, Cyclone Edition (DK-1C20). For general Nios
-information see doc/README.nios.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
-	1. Files
-	2. Memory Organization
-	3. Examples
-	4. Programming U-Boot into FLASH with GERMS
-	5. Active Serial Memory Interface (ASMI) Support
-
-====================================================================
-
-1. Files
-=========
-	board/altera/dk1c20/*
-	include/configs/DK1C20.h
-
-2. Memory Organization
-=======================
-
-	-The heap is placed below the monitor (U-Boot code).
-	-Global data is placed below the heap.
-	-The stack is placed below global data (&grows down).
-
-3. Examples
-============
-
-The hello_world example works fine. The default load address
-is 0x0100_0000 (the start of SDRAM).
-
-
-4. Programming U-Boot into FLASH with GERMS
-============================================
-The current version of the DK-1C20 port with the default
-configuration settings occupies about 81 KBytes of flash.
-A minimal configuration occupies less than 60 KByte (asmi
-and network support disabled).
-
-To program U-Boot into the DK-1C20 flash using GERMS do the
-following:
-
-1. From the command line, download U-Boot using the nios-run:
-
-	$ nios-run -r u-boot.srec
-
-This takes about 45 seconds (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
-    U-Boot 1.0.0-pre (Oct  4 2003 - 07:39:24)
-
-    CPU: Nios-32 Rev. 3.3 (0x3038)
-    Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
-    Board: Altera Nios 1C20 Development Kit
-    In:	   serial
-    Out:   serial
-    Err:   serial
-    ==>
-
-
-2. Quit nios-run and start your terminal application (e.g. start
-Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
-following:
-
-   a.  From the u-boot command prompt start a binary download to SRAM:
-
-    ==> loadb 800000
-
-    b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
-
-    ==> erase 1:4-5
-
-5. Copy the binary image from SRAM to flash:
-
-    ==> cp.b 800000 40000 10000
-
-U-Boot will now automatically start when the board is powered on or
-reset using the Standard-32 configuration. To start U-Boot with the
-Safe-32 configuration, enter the following GERMS command:
-
-    + g 40000
-
-5. Active Serial Memory Interface (ASMI) Support
-================================================
-ASMI is fully supported in U-Boot. Please note that ASMI is supported
-only on Cyclone devices. Do not expect ASMI to work with Stratix or
-APEX devices.
-
-		 ************* IMPORTANT *************
-	 ===================================================
-	IN ORDER FOR THE NIOS ASMI TO OPERATE PROPERLY, THE
-	CYCLONE DEVICE MUST BE CONFIGURED USING JTAG OR ASMI.
-
-There are two techniques you can use to bootstrap the ASMI. The
-first is to use the program_epcs utility that is part of Altera's SDK.
-But I've found program_epcs to be slow and cumbersome at best.
-
-An undocumented alternative is to use the Quartus device programing
-interface:
-
-    1. Select "Active Serial" mode.
-
-    2. Choose the xxx.pof file. For example, for the standard_32
-       configuration use the "standard_32.pof" file.
-
-    3. Attach your ByteBlaster to J28. Make sure you have the
-       cable attached properly -- the orientation of J28 is
-       different than J24 (the JTAG header). On J28, pin 1 is on
-       the bottom row, left-most pin.
-
-    4. Press and hold the "Power-On Reset" switch (SW10). You will
-       see the green "Loading" and red "Error" LEDs (LED3 and LED4)
-       in the on state.
-
-    5. While holding down the "Power-On Reset" switch, start the
-       programming sequence. This only takes about 10 seconds.
-
-    6. After programming is complete, release the "Power-On Reset"
-       switch. The Cyclone device should now load its configuration
-       from the EPCS4 (U59). The green "User" LED (LED 1) should be
-       blinking if the device was successfully loaded via ASMI.
-
-    7. Remove the ByteBlaster cable. The cable must be removed to
-       allow the Nios ASMI access to the EPCS4 device.
-
-After you have successfully programmed a configuration into the
-EPCS4, the ASMI will be used to load the Cyclone configuration
-unless the "Force Safe" switch (SW9) is pressed.
-
-NOTE: To maximize the amount of space available for program use,
-you can enable configuration compression in Quartus. With compression
-enabled, the size of the standard_32 configuration data is
-approximately 192 KBytes.
-
-To use the U-Boot ASMI commands, try typing "help asmi" at the
-command prompt. The command "asmi info" will show the current
-status of the ASMI.
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32
deleted file mode 100644
index 2be12998d31..00000000000
--- a/doc/README.dk1c20_std32
+++ /dev/null
@@ -1,366 +0,0 @@
-
-TODO:	specify IDE i/f
-	specify ASMI i/f
-	specify OCI
-
-
-===============================================================================
-	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
-===============================================================================
-see also [1]-[6]
-
-CPU:	"standard_32"
-	32 bit NIOS for 50 MHz
-	256 Byte for register file (15 levels)
-	4 KByte instruction cache (2 bytes in each cache line)
-	4 KByte data cache (4 bytes in each cache line)
-	2 KByte On Chip ROM with GERMS boot monitor
-	no On Chip RAM
-	MSTEP multiplier
-	no Debug Core
-	On Chip Instrumentation (OCI) enabled
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
-			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
-			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
-			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
-			CONFIG_SYS_NIOS_CPU_MUL	     = 0
-			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
-			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
-
-OCI:	(TODO)
-
-IRQ:	 Nr.  | used by
-	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
-	 45   | ASMI	  |  CONFIG_SYS_NIOS_CPU_ASMI0_IRQ  = 45
-	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY:	 8 MByte Flash
-	 1 MByte SRAM
-	16 MByte SDRAM
-
-ASMI:	(TODO) <-- ASMI part is 4M bits
-
-Timer:	TIMER0: high priority programmable timer (IRQ16)
-	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
-			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
-
-PIO:	 Nr.  | description
-	------+--------------------------------------------------------
-	 PIO0 | BUTTON:	    4 inputs for user push buttons (IRQ40)
-	 PIO1 | LCD:	   11 in/outputs for ASCII LCD
-	 PIO2 | LED:	    8 outputs for user LEDs
-	 PIO3 | SEVENSEG:  16 outputs for user seven segment display
-	 PIO4 | RECONF:	    1 in/output for . . . . . . . . . . . .
-	 PIO5 | CFPRESENT:  1 input for CF present event (IRQ35)
-	 PIO6 | CFPOWER:    1 output to controll CF power supply
-	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
-			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
-			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
-			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
-			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
-			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
-			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
-			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
-
-UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
-	       without handshake RTS/CTS (IRQ25)
-
-LAN:	SMsC LAN91C111 with:
-	  - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
-	  - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE:	(TODO)
-
-
-===============================================================================
-	M E M O R Y   M A P
-===============================================================================
-
-- - - - - - - - - - -  external memory 2  - - - - - - - - - - - - - - - - - - -
-
-  0x02000000 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-	       |	       :	       | |   = 0x01000000
-	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x________ ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  ASMI i/f     :   and content :	       :  > 0x________
-  [5]	       :   unknown)    :	       : |
-	       |	       |	       | /
-  0x00920b00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ASMI0
-	       |			       |
-	       :	      gap	       :
-	       |			       |
-  0x00920a80 ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  IDE i/f      :   and content :	       :  > 0x00000080
-  [6]	       :   unknown)    :	       : |
-	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER1       |		     (unused)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |		     (unused)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (1 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO7	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO6	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO5	       |  interruptmask (1 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO4	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (1 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO3	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO2	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO1	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (11 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
-	       |  edgecapture (4 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO0	       |  interruptmask (4 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  snaph (16 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER0       |  snapl (16 bit)	 (rw)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  periodh (16 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  periodl (16 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (4 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
-	       |			       | \
-	       :	      gap	       :  > (space for UART1)
-	       |			       | /
-  0x00920920 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
-
-  0x00920900 -----------------------------------
-	       |			       | \
-	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
-	       :   unknown)		       : |   = 0x00000100
-	       |			       | /
-  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - -	on chip memory	  - - - - - - - - - - -
-
-  0x00920800 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
-	       |	       :	       | |   = 0x00000800
-	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
-
-  0x00920000 ---32-----------16|15------------0-
-	       |	      gap	       | \
-  0x00910310 --+-------------------------------| |
-	       |			       | |
-	       |  register bank (size = 0x10)  | |
-	       | +--------.---.---.---	       | |
-	       | | bank 0 \ 1 \ 2 \ 3 \	       | |
-	       | |---------------------------+ | |
-  LAN91C111    | | BANK	       | RESERVED    | | |
-	       | |- - - - - - -|- - - - - - -| |  > na_lan91c111_size
-	       | | RPCR	       | MIR	     | | |   = 0x00010000
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | COUNTER     | RCR	     | | |
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | EPH STATUS  | TCR	     | | |
-	       | +---------------------------+ | |
-  0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
-	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00900000 ---32-----------16|15------------0-
-  0x00900000 --+32-----------16|15------------0+
-	       |	       :	       | \ \
-	       |	       :	       | | |
-	       |	       :	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
-	       |	       :	       | | |   = 0x00000100
-	       |	       :	       | | /
-  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
-	       |	       :	       | | \
-	       |	       :	       | | |
-	       |	       :	       | |  > stack area
-	       |	       :	       | | |
-	       |	       :	       | | V
-	       |	       :	       | |
-  SRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-	       |	       :	       | |   = 0x00100000
-	       |	       :	       | /
-  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
-  0x00800000 ---8-------------4|3-------------0-
-	       |  sector 127		       | \
-    + 0x7f0000 |- - - - - - - - - - - - - - - -| |
-	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-	       |  sector 1     :	       | |   = 0x00800000
-    + 0x010000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
-	F L A S H   M E M O R Y	  A L L O C A T I O N
-===============================================================================
-
-  0x00800000 ---8-------------4|3-------------0-
-	       |	       :	       | \
-  SAFE	       |	       :	       |  > 1 MByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00700000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-  USER	       |	       :	       |  > 1 MByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00600000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-  WEB pages    |	       :	       |  > 2 MByte
-	       |	       :	       | |    (provisory usable)
-	       |	       :	       | /
-  0x00400000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       | |
-	       |	       :	       |  > 4 MByte free for use
-	       |	       :	       | |
-  0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
-	       |	       :	       | /
-  0x00000000   |- - - - - - - -:- - - - - - - -+- - u-boot environment
-  0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.altera.com/literature/ds/ds_nios_asmi.pdf
-	http://www.altera.com/literature/wp/wp_epcs_cyc.pdf
-[6]	http://www.opencores.org/projects/ata/
-	http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10 b/doc/README.dk1s10
deleted file mode 100644
index 622bef53748..00000000000
--- a/doc/README.dk1s10
+++ /dev/null
@@ -1,131 +0,0 @@
-
-			 Nios Development Kit
-			   Startix Editions
-
-		    Last Update: January 28, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios Development Kit, Startix Edition (DK-1S10). For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1c20,
-the DK-1C20 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
-	1. Files
-	2. Memory Organization
-	3. CPU Variations
-	4. Examples
-	5. Programming U-Boot into FLASH with GERMS
-
-====================================================================
-
-1. Files
-=========
-	board/altera/dk1s10/*
-	include/configs/DK1S10.h
-
-2. Memory Organization
-=======================
-
-	-The heap is placed below the monitor (U-Boot code).
-	-Global data is placed below the heap.
-	-The stack is placed below global data (&grows down).
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the DK-1S10. U-Boot
-supports the following CPU configurations:
-
-	- Altera Standard 32 (make DK1S10_standard_32_config)
-	- Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
-
-4. Examples
-============
-
-The hello_world example was never tested on DK-1S10. Neverthelse
-it should work as far as possible, because the DK-1S10 port is
-more than ninetieth percents equal to the DK-1C20 port and at
-this platform the hello_world example was already tested
-successfully (see README.dk1c20).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-The current version of the DK-1S10 port with the default
-configuration settings occupies about 78 KBytes of flash.
-A minimal configuration occupies less than 60 KByte
-(network support disabled).
-
-To program U-Boot into the DK-1S10 flash using GERMS do the
-following:
-
-1. From the command line, download U-Boot using the nios-run:
-
-	$ nios-run -r u-boot.srec
-
-This takes about 45 seconds (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
-    U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
-
-    CPU: Nios-32 Rev. 3.3 (0x3038)
-    Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
-    Board: Altera Nios 1S10 Development Kit
-    In:    serial
-    Out:   serial
-    Err:   serial
-    DK1S10 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
-   Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
-   following:
-
-   a. From the u-boot command prompt start a binary download to
-      SRAM / SDRAM:
-
-      at the Altera Standard 32 to SRAM:
-
-	==> loadb 800000
-
-      at the Microtronix LDK 2.0 to SDRAM:
-
-	==> loadb 1010000
-
-   b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
-   at the Altera Standard 32 from 0x40000 to 0x5ffff:
-
-	==> erase 1:4-5
-
-   at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
-
-	==> erase 1:0-1
-
-5. Copy the binary image from SRAM / SDRAM to flash:
-
-   at the Altera Standard 32 to SRAM:
-
-	==> cp.b 800000 40000 ${filesize}
-
-   at the Microtronix LDK 2.0 to SDRAM:
-
-	==> cp.b 1010000 8000000 ${filesize}
-
-U-Boot will now automatically start when the board is powered on or
-reset using the Standard-32 configuration. To start U-Boot with the
-Safe-32 configuration, enter the following GERMS command:
-
-    + g 40000
diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20
deleted file mode 100644
index 74e07a93d15..00000000000
--- a/doc/README.dk1s10_mldk20
+++ /dev/null
@@ -1,286 +0,0 @@
-
-TODO:	specify IDE i/f
-
-
-===============================================================================
-	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU:	"LDK2"
-	32 bit NIOS for 75 MHz
-	512 Byte for register file (30 levels)
-	with out instruction cache
-	with out data cache
-	2 KByte On Chip ROM with GERMS boot monitor
-	with out On Chip RAM
-	MSTEP multiplier
-	no Debug Core
-	no On Chip Instrumentation (OCI)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 75000000
-			CONFIG_SYS_NIOS_CPU_ICACHE	     = (not present)
-			CONFIG_SYS_NIOS_CPU_DCACHE	     = (not present)
-			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 512
-			CONFIG_SYS_NIOS_CPU_MUL	     = 0
-			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
-			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
-
-IRQ:	 Nr.  | used by
-	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
-	 17   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 17
-	 18   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 18
-	 20   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 20
-	 25   | IDE0	  |  CONFIG_SYS_NIOS_CPU_IDE0_IRQ   = 25
-
-MEMORY:	 8 MByte Flash
-	16 MByte SDRAM
-
-Timer:	TIMER0: high priority programmable timer (IRQ16)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
-			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = (not present)
-
-PIO:	 Nr.  | description
-	------+--------------------------------------------------------
-	 PIO0 | CFPOWER:    1 output to controll CF power supply
-	 PIO1 | BUTTON:	    4 inputs for user push buttons (no IRQ)
-	------+--------------------------------------------------------
-	 not  | LCD:	   11 in/outputs for ASCII LCD
-	 pres.| LED:	    8 outputs for user LEDs
-	      | SEVENSEG:  16 outputs for user seven segment display
-	      | RECONF:	    1 in/output for . . . . . . . . . . . .
-	      | CFPRESENT:  1 input for CF present event (IRQ35)
-	      | CFATASEL:   1 output to controll CF ATA card select
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 1
-			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = (not present)
-			CONFIG_SYS_NIOS_CPU_LED_PIO	     = (not present)
-			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = (not present)
-			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = (not present)
-			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = (not present)
-			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 0
-			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = (not present)
-
-UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
-	       without handshake RTS/CTS (IRQ17)
-	UART1: fixed baudrate of 115200, fixed protocol 8N1,
-	       without handshake RTS/CTS (IRQ18)
-
-LAN:	SMsC LAN91C111 with:
-	  - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
-	  - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE:	(TODO)
-
-
-===============================================================================
-	M E M O R Y   M A P
-===============================================================================
-
-- - - - - - - - - - -   external memory   - - - - - - - - - - - - - - - - - - -
-
-  0x02000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_STACK
-  0x02000000 --+32-----------16|15------------0+
-	       |	       .	       | \ \
-	       |	       .	       | | |
-	       |	       .	       | |  > stack area
-	       |	       .	       | | |
-	       |	       .	       | | V
-	       |	       .	       | |
-	       |	       .	       | |
-  SDRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-	       |	       .	       | |   = 0x01000000
-	       |	       .	       | |
-  0x01000100   |- - - - - - - - - - - - - - - -+-|-
-	       |	       .	       | | \
-	       |	       .	       | | |
-	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
-	       |	       .	       | | |   = 0x00000100
-	       |			       | / /
-  0x01000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
-  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-	       |  sector 127		       | \
-    + 0x7f0000 |- - - - - - - - - - - - - - - -| |
-	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-	       |  sector 1     :	       | |   = 0x00800000
-    + 0x010000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 0 (size = 0x10000)    | /
-  0x00800000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00020000 ---32-----------16|15------------0-
-	       |	      gap	       | \
-  0x00010310 --+-------------------------------| |
-	       |			       | |
-	       |  register bank (size = 0x10)  | |
-	       | +--------.---.---.---	       | |
-	       | | bank 0 \ 1 \ 2 \ 3 \	       | |
-	       | |---------------------------+ | |
-  LAN91C111    | | BANK	       | RESERVED    | | |
-	       | |- - - - - - -|- - - - - - -| |  > na_enet_size
-	       | | RPCR	       | MIR	     | | |   = 0x00010000
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | COUNTER     | RCR	     | | |
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | EPH STATUS  | TCR	     | | |
-	       | +---------------------------+ | |
-  0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
-	       |	      gap	       | /
-  0x00010000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00000980 ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  IDE i/f      :   and content :	       :  > 0x00000080
-  [5]	       :   unknown)    :	       : |
-	       |	       |	       | /
-  0x00000900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
-	       |			       | \
-	       :	      gap	       :  > (space for PIO4..7)
-	       |			       | /
-  0x000008c0 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART1	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x000008a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
-	       |			       | \
-	       :	      gap	       :  > (space for PIO2..3)
-	       |			       | /
-  0x00000880 ---32-----------16|15------------0-
-	       |  edgecapture (4 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO1	       |  interruptmask (4 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (4 bit)		 (ro)  | /
-  0x00000870 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO0	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x00000860 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  snaph (16 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER0       |  snapl (16 bit)	 (rw)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  periodh (16 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  periodl (16 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (4 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x00000840 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
-	       |			       | \
-	       :	      gap	       :  > (space for UART2)
-	       |			       | /
-  0x00000820 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000800 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
-
-  0x00000800 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
-	       |	       :	       | |   = 0x00000800
-	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
-  0x00000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-===============================================================================
-	F L A S H   M E M O R Y	  A L L O C A T I O N
-===============================================================================
-
-  0x01000000 ---8-------------4|3-------------0-
-	       |	       :	       | \
-  SAFE	       |	       :	       |  > 1 MByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00f00000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-  USER	       |	       :	       |  > 1 MByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00e00000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-  WEB pages    |	       :	       |  > 2 MByte
-	       |	       :	       | |    (provisory usable)
-	       |	       :	       | /
-  0x00c00000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       | |
-	       |	       :	       |  > 4 MByte free for use
-	       |	       :	       | |
-  0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
-	       |	       :	       | /
-  0x00800000   |- - - - - - - -:- - - - - - - -+- - u-boot _start()
-  0x00800000 ---8-------------4|3-------------0-
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.opencores.org/projects/ata/
-	http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32
deleted file mode 100644
index 622b2b9c837..00000000000
--- a/doc/README.dk1s10_std32
+++ /dev/null
@@ -1,354 +0,0 @@
-
-TODO:	specify IDE i/f
-	specify OCI
-
-
-===============================================================================
-	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU:	"standard_32"
-	32 bit NIOS for 50 MHz
-	256 Byte for register file (15 levels)
-	4 KByte instruction cache (4 bytes in each cache line)
-	4 KByte data cache (4 bytes in each cache line)
-	2 KByte On Chip ROM with GERMS boot monitor
-	64 KByte On Chip RAM
-	MSTEP multiplier
-	no Debug Core
-	On Chip Instrumentation (OCI) enabled
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
-			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
-			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
-			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
-			CONFIG_SYS_NIOS_CPU_MUL	     = 0
-			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
-			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
-
-OCI:	(TODO)
-
-IRQ:	 Nr.  | used by
-	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
-	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY:	 8 MByte Flash
-	 1 MByte SRAM
-	16 MByte SDRAM
-
-Timer:	TIMER0: high priority programmable timer (IRQ16)
-	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
-			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
-
-PIO:	 Nr.  | description
-	------+--------------------------------------------------------
-	 PIO0 | BUTTON:	    4 inputs for user push buttons (IRQ40)
-	 PIO1 | LCD:	   11 in/outputs for ASCII LCD
-	 PIO2 | LED:	    8 outputs for user LEDs
-	 PIO3 | SEVENSEG:  16 outputs for user seven segment display
-	 PIO4 | RECONF:	    1 in/output for . . . . . . . . . . . .
-	 PIO5 | CFPRESENT:  1 input for CF present event (IRQ35)
-	 PIO6 | CFPOWER:    1 output to controll CF power supply
-	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
-			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
-			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
-			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
-			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
-			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
-			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
-			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
-
-UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
-	       without handshake RTS/CTS (IRQ25)
-
-LAN:	SMsC LAN91C111 with:
-	  - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
-	  - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE:	(TODO)
-
-
-===============================================================================
-	M E M O R Y   M A P
-===============================================================================
-
-- - - - - - - - - - -  external memory 2  - - - - - - - - - - - - - - - - - - -
-
-  0x02000000 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-	       |	       :	       | |   = 0x01000000
-	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00920a80 ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  IDE i/f      :   and content :	       :  > 0x00000080
-  [5]	       :   unknown)    :	       : |
-	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER1       |		     (unused)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |		     (unused)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (1 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO7	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO6	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO5	       |  interruptmask (1 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO4	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (1 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO3	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO2	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO1	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (11 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
-	       |  edgecapture (4 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO0	       |  interruptmask (4 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  snaph (16 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER0       |  snapl (16 bit)	 (rw)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  periodh (16 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  periodl (16 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (4 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
-	       |			       | \
-	       :	      gap	       :  > (space for UART1)
-	       |			       | /
-  0x00920920 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
-
-  0x00920900 -----------------------------------
-	       |			       | \
-	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
-	       :   unknown)		       : |   = 0x00000100
-	       |			       | /
-  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - -  on chip memory 2	  - - - - - - - - - - -
-
-  0x00920800 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
-	       |	       :	       | |   = 0x00000800
-	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
-
-  0x00920000 ---32-----------16|15------------0-
-	       |	      gap	       | \
-  0x00910310 --+-------------------------------| |
-	       |			       | |
-	       |  register bank (size = 0x10)  | |
-	       | +--------.---.---.---	       | |
-	       | | bank 0 \ 1 \ 2 \ 3 \	       | |
-	       | |---------------------------+ | |
-  LAN91C111    | | BANK	       | RESERVED    | | |
-	       | |- - - - - - -|- - - - - - -| |  > na_lan91c111_size
-	       | | RPCR	       | MIR	     | | |   = 0x00010000
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | COUNTER     | RCR	     | | |
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | EPH STATUS  | TCR	     | | |
-	       | +---------------------------+ | |
-  0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
-	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
-
-- - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
-
-  0x00910000 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  onchip RAM   |	       :	       |  > CONFIG_SYS_NIOS_CPU_RAM_SIZE
-	       |	       :	       | |   = 0x00010000
-	       |	       :	       | /
-  0x00900000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_RAM_BASE
-
-- - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
-
-  0x00900000 ---32-----------16|15------------0-
-  0x00900000 --+32-----------16|15------------0+
-	       |	       .	       | \ \
-	       |	       .	       | | |
-	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
-	       |	       .	       | | |   = 0x00000100
-	       |	       .	       | | /
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
-	       |	       .	       | | \
-	       |	       .	       | | |
-	       |	       .	       | |  > stack area
-	       |	       .	       | | |
-	       |	       .	       | | V
-	       |	       .	       | |
-  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-	       |	       .	       | |   = 0x00100000
-	       |			       | /
-  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
-  0x00800000 ---8-------------4|3-------------0-
-	       |  sector 127		       | \
-    + 0x7f0000 |- - - - - - - - - - - - - - - -| |
-	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-	       |  sector 1     :	       | |   = 0x00800000
-    + 0x010000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
-	F L A S H   M E M O R Y	  A L L O C A T I O N
-===============================================================================
-
-  0x00800000 ---8-------------4|3-------------0-
-	       |	       :	       | \
-  SAFE	       |	       :	       |  > 1 MByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00700000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-  USER	       |	       :	       |  > 1 MByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00600000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-  WEB pages    |	       :	       |  > 2 MByte
-	       |	       :	       | |    (provisory usable)
-	       |	       :	       | /
-  0x00400000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       | |
-	       |	       :	       |  > 4 MByte free for use
-	       |	       :	       | |
-  0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
-	       |	       :	       | /
-  0x00000000   |- - - - - - - -:- - - - - - - -+- - u-boot environment
-  0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.opencores.org/projects/ata/
-	http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32
deleted file mode 100644
index 9a0ea060c75..00000000000
--- a/doc/README.dk1s40_std32
+++ /dev/null
@@ -1,355 +0,0 @@
-
-TODO:	specify IDE i/f
-	specify OCI
-
-
-===============================================================================
-	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU:	"standard_32"
-	32 bit NIOS for 50 MHz
-	256 Byte for register file (15 levels)
-	4 KByte instruction cache (4 bytes in each cache line)
-	4 KByte data cache (4 bytes in each cache line)
-	2 KByte On Chip ROM with GERMS boot monitor
-	64 KByte On Chip RAM
-	MSTEP multiplier
-	no Debug Core
-	On Chip Instrumentation (OCI) enabled
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
-			CONFIG_SYS_NIOS_CPU_ICACHE	     = 4096
-			CONFIG_SYS_NIOS_CPU_DCACHE	     = 4096
-			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
-			CONFIG_SYS_NIOS_CPU_MUL	     = 0
-			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
-			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
-
-OCI:	(TODO)
-
-IRQ:	 Nr.  | used by
-	------+--------------------------------------------------------
-	 16   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
-	 25   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 25
-	 30   | LAN91C111 |  CONFIG_SYS_NIOS_CPU_LAN0_IRQ   = 30
-	 35   | PIO5	  |  CONFIG_SYS_NIOS_CPU_PIO5_IRQ   = 35
-	 40   | PIO0	  |  CONFIG_SYS_NIOS_CPU_PIO0_IRQ   = 40
-	 50   | TIMER1	  |  CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY:	 8 MByte Flash
-	 1 MByte SRAM
-	16 MByte SDRAM
-
-Timer:	TIMER0: high priority programmable timer (IRQ16)
-	TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 1
-			CONFIG_SYS_NIOS_CPU_USER_TIMER	     = 0
-
-PIO:	 Nr.  | description
-	------+--------------------------------------------------------
-	 PIO0 | BUTTON:	    4 inputs for user push buttons (IRQ40)
-	 PIO1 | LCD:	   11 in/outputs for ASCII LCD
-	 PIO2 | LED:	    8 outputs for user LEDs
-	 PIO3 | SEVENSEG:  16 outputs for user seven segment display
-	 PIO4 | RECONF:	    1 in/output for . . . . . . . . . . . .
-	 PIO5 | CFPRESENT:  1 input for CF present event (IRQ35)
-	 PIO6 | CFPOWER:    1 output to controll CF power supply
-	 PIO7 | CFATASEL:   1 output to controll CF ATA card select
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 0
-			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 1
-			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 2
-			CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 3
-			CONFIG_SYS_NIOS_CPU_RECONF_PIO	     = 4
-			CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO   = 5
-			CONFIG_SYS_NIOS_CPU_CFPOWER_PIO     = 6
-			CONFIG_SYS_NIOS_CPU_CFATASEL_PIO    = 7
-
-UART:	UART0: fixed baudrate of 115200, fixed protocol 8N1,
-	       without handshake RTS/CTS (IRQ25)
-
-LAN:	SMsC LAN91C111 with:
-	  - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
-	  - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE:	(TODO)
-
-
-===============================================================================
-	M E M O R Y   M A P
-===============================================================================
-
-- - - - - - - - - - -  external memory 2  - - - - - - - - - - - - - - - - - - -
-
-  0x02000000 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  SDRAM	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-	       |	       :	       | |   = 0x01000000
-	       |	       :	       | /
-  0x01000000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00920a80 ---32-----------16|15------------0-
-	       |	       |	       | \
-	       :  (real size   :	       : |
-  IDE i/f      :   and content :	       :  > 0x00000080
-  [5]	       :   unknown)    :	       : |
-	       |	       |	       | /
-  0x00920a00 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_IDE0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER1       |		     (unused)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |		     (unused)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (1 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x009209e0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER1
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO7	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x009209d0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO7
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO6	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (wo)  | /
-  0x009209c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO6
-	       |  edgecapture (1 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO5	       |  interruptmask (1 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (ro)  | /
-  0x009209b0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO5
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO4	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (1 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (1 bit)		 (rw)  | /
-  0x009209a0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO4
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO3	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (16 bit)		 (wo)  | /
-  0x00920990 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO2	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (8 bit)		 (wo)  | /
-  0x00920980 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO1	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (11 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (11 bit)		 (rw)  | /
-  0x00920970 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
-	       |  edgecapture (4 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO0	       |  interruptmask (4 bit)	 (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (4 bit)		 (ro)  | /
-  0x00920960 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  snaph (16 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER0       |  snapl (16 bit)	 (rw)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  periodh (16 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  periodl (16 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (4 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x00920940 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
-	       |			       | \
-	       :	      gap	       :  > (space for UART1)
-	       |			       | /
-  0x00920920 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00920900 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - -  on chip debugging  - - - - - - - - - - - - - - - - - - -
-
-  0x00920900 -----------------------------------
-	       |			       | \
-	       :  (real size		       : |
-  OCI Debug    :   and content		       :  > CONFIG_SYS_NIOS_CPU_OCI_SIZE
-	       :   unknown)		       : |   = 0x00000100
-	       |			       | /
-  0x00920800 -----------------------------------    CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - -  on chip memory 2	  - - - - - - - - - - -
-
-  0x00920800 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  GERMS	       |	       :	       |  > CONFIG_SYS_NIOS_CPU_ROM_SIZE
-	       |	       :	       | |   = 0x00000800
-	       |	       :	       | /
-  0x00920000   |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
-  0x00920000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - -	 external i/o	  - - - - - - - - - - - - - - - - - - -
-
-  0x00920000 ---32-----------16|15------------0-
-	       |	      gap	       | \
-  0x00910310 --+-------------------------------| |
-	       |			       | |
-	       |  register bank (size = 0x10)  | |
-	       | +--------.---.---.---	       | |
-	       | | bank 0 \ 1 \ 2 \ 3 \	       | |
-	       | |---------------------------+ | |
-  LAN91C111    | | BANK	       | RESERVED    | | |
-	       | |- - - - - - -|- - - - - - -| |  > na_lan91c111_size
-	       | | RPCR	       | MIR	     | | |   = 0x00010000
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | COUNTER     | RCR	     | | |
-	       | |- - - - - - -|- - - - - - -| | |
-	       | | EPH STATUS  | TCR	     | | |
-	       | +---------------------------+ | |
-  0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
-	       |	      gap	       | /
-  0x00910000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_LAN0_BASE
-
-- - - - - - - - - - -  on chip memory 1	  - - - - - - - - - - -
-
-  0x00910000 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  onchip RAM   |	       :	       |  > CONFIG_SYS_NIOS_CPU_RAM_SIZE
-	       |	       :	       | |   = 0x00010000
-	       |	       :	       | /
-  0x00900000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_RAM_BASE
-
-- - - - - - - - - - -  external memory 1  - - - - - - - - - - - - - - - - - - -
-
-  0x00900000 ---32-----------16|15------------0-
-  0x00900000 --+32-----------16|15------------0+
-	       |	       .	       | \ \
-	       |	       .	       | | |
-	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
-	       |	       .	       | | |   = 0x00000100
-	       |	       .	       | | /
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
-  0x008fff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
-	       |	       .	       | | \
-	       |	       .	       | | |
-	       |	       .	       | |  > stack area
-	       |	       .	       | | |
-	       |	       .	       | | V
-	       |	       .	       | |
-  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-	       |	       .	       | |   = 0x00100000
-	       |			       | /
-  0x00800000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
-  0x00800000 ---8-------------4|3-------------0-
-	       |  sector 127		       | \
-    + 0x7f0000 |- - - - - - - - - - - - - - - -| |
-	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-	       |  sector 1     :	       | |   = 0x00800000
-    + 0x010000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 0 (size = 0x10000)    | /
-  0x00000000 ---8-------------4|3-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
-	F L A S H   M E M O R Y	  A L L O C A T I O N
-===============================================================================
-
-  0x00800000 ---8-------------4|3-------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  SAFE	       |	       :	       |  > 2 MByte
-  FPGA conf.   |	       :	       | |    (NOT usable by software)
-	       |	       :	       | /
-  0x00600000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-  USER	       |	       :	       |  > 2 MByte
-  FPGA conf.   |	       :	       | |    (NOT usable by software)
-	       |	       :	       | /
-  0x00400000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-  WEB pages    |	       :	       |  > 2 MByte
-	       |	       :	       | |    (provisory usable)
-	       |	       :	       | /
-  0x00200000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       |  > 2 MByte free for use
-  0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
-	       |	       :	       | /
-  0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.opencores.org/projects/ata/
-	http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32
deleted file mode 100644
index fc2d2a38749..00000000000
--- a/doc/README.dk20k200_std32
+++ /dev/null
@@ -1,242 +0,0 @@
-
-===============================================================================
-	C P U ,	  M E M O R Y ,	  I N / O U T	C O M P O N E N T S
-===============================================================================
-see also [1]-[4]
-
-CPU:	"standard_32"
-	32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000)
-	256 Byte for register file (15 levels)
-	no instruction cache
-	no data cache
-	1 KByte On Chip ROM with GERMS boot monitor
-	no On Chip RAM
-	MSTEP multiplier
-	no Debug Core
-	no On Chip Instrumentation (OCI) enabled
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_CLK	     = 50000000
-			CONFIG_SYS_NIOS_CPU_ICACHE	     = 0
-			CONFIG_SYS_NIOS_CPU_DCACHE	     = 0
-			CONFIG_SYS_NIOS_CPU_REG_NUMS	     = 256
-			CONFIG_SYS_NIOS_CPU_MUL	     = 0
-			CONFIG_SYS_NIOS_CPU_MSTEP	     = 1
-			CONFIG_SYS_NIOS_CPU_DBG_CORE	     = 0
-
-IRQ:	 Nr.  | used by
-	------+--------------------------------------------------------
-	 25   | TIMER0	  |  CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25
-	 26   | UART0	  |  CONFIG_SYS_NIOS_CPU_UART0_IRQ  = 26
-	 27   | PIO2	  |  CONFIG_SYS_NIOS_CPU_PIO2_IRQ   = 27
-	 28   | UART1	  |  CONFIG_SYS_NIOS_CPU_UART1_IRQ  = 28    (debug)
-
-MEMORY:	  1 MByte Flash
-	256 KByte SRAM
-	(SDRAM with standard SODIMM only)
-
-Timer:	TIMER0: high priority programmable timer (IRQ25)
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_TICK_TIMER	     = 0
-
-PIO:	 Nr.  | description
-	------+--------------------------------------------------------
-	 PIO0 | SEVENSEG:  16 outputs for user seven segment display
-	 PIO1 | LED:	    8 outputs for user LEDs
-	 PIO2 | BUTTON:	    4 inputs for user push buttons (IRQ27)
-	 PIO3 | LCD:	   11 in/outputs for ASCII LCD
-
-	U-Boot CFG:	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO    = 0
-			CONFIG_SYS_NIOS_CPU_LED_PIO	     = 1
-			CONFIG_SYS_NIOS_CPU_BUTTON_PIO	     = 2
-			CONFIG_SYS_NIOS_CPU_LCD_PIO	     = 3
-
-UART:	UART0: fixed baudrate of 115200, fixed protocol 8N2,
-	       without handshake RTS/CTS (IRQ26)
-	UART1: fixed baudrate of 115200, fixed protocol 8N1,
-	       without handshake RTS/CTS (IRQ28)
-
-
-===============================================================================
-	M E M O R Y   M A P
-===============================================================================
-
-- - - - - - - - - - -	external memory	  - - - - - - - - - - - - - - - - - - -
-
-  0x00200000 ---15------------8|7-------------0-
-	       |  sector 18		       | \
-    + 0x0f0000 |- - - - - - - - - - - - - - - -| |
-	       |	       :	       | |
-  Flash	       |-   -	-   -  :  -   -	  -   -| |
-	       |  sector 5     :	       | |
-    + 0x020000 |-   -	-   -  -  -   -	  -   -| |
-	       |  sector 4 (size = 0x10000)    | |
-    + 0x010000 |- - - - - - - - - - - - - - - -|  > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-	       |  sector 3 (size = 0x08000)    | |   = 0x00100000
-    + 0x008000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 2 (size = 0x02000)    | |
-    + 0x006000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 1 (size = 0x02000)    | |
-    + 0x004000 |- - - - - - - - - - - - - - - -| |
-	       |  sector 0 (size = 0x04000)    | /
-  0x00100000 ---15------------8|7-------------0-    CONFIG_SYS_NIOS_CPU_FLASH_BASE
-	       |			       |
-	       :	      gap	       :
-	       |			       |
-  0x00080000 ---32-----------16|15------------0-
-  0x00080000 --+32-----------16|15------------0+
-	       |	       .	       | \ \
-	       |	       .	       | | |
-	       |	       .	       | |  > CONFIG_SYS_NIOS_CPU_VEC_SIZE
-	       |	       .	       | | |   = 0x00000100
-	       |	       .	       | | /
-  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
-  0x0007ff00   |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
-	       |	       .	       | | \
-	       |	       .	       | | |
-	       |	       .	       | |  > stack area
-	       |	       .	       | | |
-	       |	       .	       | | V
-	       |	       .	       | |
-  SRAM	       |	       .	       |  > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-	       |	       .	       | |   = 0x00040000
-	       |			       | /
-  0x00040000 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_SRAM_BASE
-	       |			       |
-	       :	      gap	       :
-	       :			       :
-
-- - - - - - - - - - -	  on chip i/o	  - - - - - - - - - - - - - - - - - - -
-
-	       :			       :
-	       :	      gap	       :
-	       |			       |
-  0x00000400 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART1	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x000004c0 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART1
-	       |			       |
-	       :	      gap	       :
-	       |			       |
-  0x00000490 ---32-----------16|15------------0-
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO3	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (11 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (11 bit)		 (rw)  | /
-  0x00000480 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO3
-	       |  edgecapture (12 bit)	 (rw)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO2	       |  interruptmask (12 bit) (rw)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (12 bit)		 (ro)  | /
-  0x00000470 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO2
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO1	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |  direction (2 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (2 bit)		 (rw)  | /
-  0x00000460 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO1
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |  snaph (16 bit)	 (rw)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  TIMER0       |  snapl (16 bit)	 (rw)  | |
-  [3]	+ 0x10 |- - - - - - - - - - - - - - - -|  > 0x00000020
-	       |  periodh (16 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  periodl (16 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  control (4 bit)	 (rw)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  status (2 bit)	 (rw)  | /
-  0x00000440 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_TIMER0
-	       |		     (unused)  | \
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-  PIO0	       |		     (unused)  | |
-  [4]	+ 0x08 |- - - - - - - - - - - - - - - -|  > 0x00000010
-	       |		     (unused)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  data (16 bit)		 (wo)  | /
-  0x00000420 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_PIO0
-	       |		     (unused)  | \
-	+ 0x1c |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x18 |- - - - - - - - - - - - - - - -| |
-	       |		     (unused)  | |
-	+ 0x14 |- - - - - - - - - - - - - - - -| |
-  UART0	       |		     (unused)  |  > 0x00000020
-  [2]	+ 0x10 |- - - - - - - - - - - - - - - -| |
-	       |  control (10 bit)	 (rw)  | |
-	+ 0x0c |- - - - - - - - - - - - - - - -| |
-	       |  status (10 bit)	 (rw)  | |
-	+ 0x08 |- - - - - - - - - - - - - - - -| |
-	       |  txdata (8 bit)	 (wo)  | |
-	+ 0x04 |- - - - - - - - - - - - - - - -| |
-	       |  rxdata (8 bit)	 (ro)  | /
-  0x00000400 ---32-----------16|15------------0-    CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - -	on chip memory	  - - - - - - - - - - -
-
-  0x00000400 ---32-----------16|15------------0-
-	       |	       :	       | \
-	       |	       :	       | |
-  GERMS	       |	       :	       |  > na_boot_monitor_rom_size
-	       |	       :	       | |   = 0x00000400
-	       |	       :	       | /
-  0x00000000   |- - - - - - - - - - - - - - - -+- - nasys_reset_address
-  0x00000000 ---32-----------16|15------------0-    na_boot_monitor_rom
-
-
-===============================================================================
-	F L A S H   M E M O R Y	  A L L O C A T I O N
-===============================================================================
-
-  0x00200000 ---15------------8|7-------------0-
-	       |	       :	       | \
-  SAFE	       |	       :	       |  > 256 KByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x001c0000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-  USER	       |	       :	       |  > 256 KByte
-  FPGA conf.   |	       :	       | /    (NOT usable by software)
-  0x00180000 --+- - - - - - - -:- - - - - - - -+-
-	       |	       :	       | \
-	       |	       :	       | |
-	       |	       :	       |  > 512 KByte free for use
-  0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
-	       |	       :	       | /
-  0x00100000 ---15------------8|7-------------0-
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.nios b/doc/README.nios
deleted file mode 100644
index 56281446003..00000000000
--- a/doc/README.nios
+++ /dev/null
@@ -1,366 +0,0 @@
-
-			   U-Boot for Nios-32
-
-		    Last Update: February 1, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios CPU. For information regarding U-Boot and the Nios Development
-Kits see:
-
-  * Cyclone Edition (DK-1C20), see doc/README.dk1c20
-  * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO)
-  * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO)
-  * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO)
-
-For informations regarding Nios Development Kit hardware overview
-and the NIOS CPU standard configuration of all known boards made by
-Altera see:
-
-  * Development Kit (DK) hardware overview, see doc/README.nios_DK
-  * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32
-  * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32
-  * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32
-  * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32
-
-For those interested in contributing ... see HELP WANTED below.
-
-
-1. OVERVIEW
-------------
-
-U-Boot has been successfully tested on the Nios Cyclone development
-board using both the 'safe' and 'standard 32' configurations with
-Nios CPU revision 3.1 (CPU_ID = 0x3018). U-Boot can be used with
-or without the GERMS monitor. The initial version of U-Boot for the
-Cyclone development kit is about 60 Kbyte and will fit in a single
-sector of on-board FLASH. Only the Nios 32-bit CPU is supported.
-
-1.1 GERMS Monitor
-------------------
-If GERMS is just not enough, then U-Boot is a great antibiotic.
-You will be very pleased with its high degree of configurability
-and its rich feature set.
-
-A few of the most obvious limitations of GERMS are overcome by
-using U-Boot (See 'Brain Damage'). Most notably, you can use
-minicom or Hyperterminal (duh).
-
-1.2 Altera Source Code
------------------------
-The Nios port does NOT include ANY sources that Altera has the
-copyright. This was a conscious decision ... not an accident.
-The Altera license is not clear in terms of distributing Altera
-sources (when altera silicon is not involved). This isn't really
-a problem as little, if any, of the Altera source contains
-features that are not already available in U-Boot.
-
-1.3 Debugging via OCI
----------------------
-The Nios port supports debugging with gdb and/or nios-console
-via the JTAG port. Stubs for debugging with gdb via the serial
-port are not currently implemented.
-
-
-2. CONFIGURATION OPTIONS/SETTINGS
-----------------------------------
-
-2.1 Nios-specific Options/Settings
------------------------------------
-All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_".
-
-The configuration follows a two-stage process. In the first stage
-the NIOS CPU core will defined like defined in Alteras SOPC Builder.
-At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For
-more informations about all the definitions you have to setup see
-into current board configurations and doc/README.nios_CFG_NIOS_CPU.
-
-In second stage we bring the NIOS CPU configuration in relation to
-U-Boot configuration options/settings. The following is a list of
-currently defined Nios-specific options/parameters used inside of
-U-Boot. If any options are related to Standard-32 Nios SDK
-excalibur.h definitions, the related definition follows the
-description).
-
-CONFIG_NIOS -- defined for all Nios-32 boards.
-
-CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG
-	stdio port. To enable a console via JTAG, define
-	CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address
-	of the JTAG stdio port (normally OCI base + 0x00fa). Then
-	run nios-console with the -w option.
-	(standard-32: nasys_uart_0 resp. na_uart1_base).
-
-CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
-	parameter is set to '1'.
-
-CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
-
-CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
-	MSTEP instruction (not yet implemented).
-
-CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support
-	xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
-	(standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
-
-CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
-	the timer. (standard-32: nasys_timer_1_irq resp.
-	na_low_priority_timer2_irq).
-
-CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds.
-
-CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
-	no fixed period.
-
-CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
-	(standard-32: na_asmi_base).
-
-CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
-	(nasys_spi_0)
-
-CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
-	This value can be 8 or 16 only! (PTF: databits)
-
-
-2.2 Differences in U-Boot Options/Settings
--------------------------------------------
-Some 'standard' U-Boot options/settings are treated differently in
-the Nios port. These are described below.
-
-CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
-	global data structure in the Nios memory space. More simply,
-	the address of global data.
-
-
-3. ASSEMBLY CODING
--------------------
-
-In browsing the assembly source files, you may notice the absence
-of the 'magic macros' (e.g. MOVIA, MOVIP, ADDIP etc.). This is
-deliberate. The documentation for the magic macros is scant and
-it is hard to find ... it does not appear in the Nios programmer's
-manual, nor does it appear in the assembler manual. Regardless,
-the macros actually do very little to improve readability anyway.
-
-With this in mind, all assembler modules use only instructions that
-appear in the Nios programmer's manual OR are directly supported
-by the nios-elf toolchain. For example, the 'dec %rB' instruction
-is an alias for 'subi %rB,1' that is supported by the assembler
-but does not appear in the programmer's manual.
-
-
-4. BOOT PROCESS
----------------
-
-4.1 Boot process over GERMS
----------------------------
-When the NIOS CPU catch a reset signal it will begin to be running
-code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will
-find the GERMS monitor. That's the case for the generic NIOS CPU
-configuration "standard_32". When the GERMS monitor starts running,
-it performs important system initializations and then looks for
-executable code in flash, using the following steps:
-
-    1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C.
-    2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO.
-    3. If the button is not pressed and the two bytes contain 'N'
-       and 'i', the monitor executes a CALL to location
-       CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000.
-    4. If the code is not executed in step 3 or the code returns,
-       then prints an 8-digit version number to STDOUT and waits for
-       user commands from STDIN.
-
-In normal case, for "standard_32", STDIN and STDOUT are the first
-serial port.
-
-4.2 Return to GERMS command line
---------------------------------
-During the boot process, the GERMS monitor checks for the existence
-of application software in flash memory. If found, the processor
-immediately executes the code. To return program execution to the
-GERMS monitor (that is, avoid running code stored in flash memory):
-
-    1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
-    2. Press then release the CPU reset button.
-    3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
-
-
-5. DEBUGGING WITH GDB
----------------------
-
-Debug sessions using gdb are currently supported only via JTAG. The
-stubs for debugging via a serial port are not implemented. To enable
-the gdb JTAG stubs, simply reference _brkpt_hw_int and _brkpt_sw_int
-at vector table offsets 3 and 4, respectively. For an example, see
-board/altera/dk1c20/vectors.S.
-
-5.1 Vector Table Initialization and ROM Stubs
----------------------------------------------
-If CONFIG_ROM_STUBS is defined, the debug breakpoint and single step
-entries in the vector table are restored to their initial values
-immediately _after_ initializing the vector table. Defining this macro
-is useful when ROM-based stubs are implemented.
-
-NOTE: The default GERMS monitor does NOT implement gdb stubs, nor does
-it initialize the vector table. Therefore, when debugging U-Boot, you
-should NOT set a software breakpoint prior to vector table initialization.
-
-5.2 Starting a Debug Session
-----------------------------
-If you're not familiar with gdb, you follow these step-by-step instructions.
-These instructions are NOT the only way to start a debug session, but they
-cover most of the individual functions to get you started.
-
-	1.  Start the JTAG gdb server. Open a Nios shell window and start
-	the server. When the server is started you must provide the base
-	address of the OCI core. For example, when using the Cyclone
-	development kit (DK1C20):
-
-		$ nios-gdb-server --ocibase=0x00920800 --tcpport=2342
-
-	2.  Start gdb. Open a Nios shell window, change to the top-level
-	U-Boot directory and start gdb, specifying the u-boot elf file:
-
-		$ nios-elf-gdb u-boot
-
-	3.  Update target settings. From the file menu, select
-	"Target Settings ..." and select the following, then click 'Ok':
-
-		Target:	Remote/TCP
-		Port :	2342   (same as in step 1)
-		Display download dialog: checked
-		All other check boxes: unchecked
-
-	4.  Connect to the target. Select menu: 'Run->Connect to target'.
-	You should see a dialog box indicating the you successfully connected
-	to the target.
-
-	5.  Download U-Boot. Select menu: 'Run->Download'.
-
-	6.  Open a gdb console window and set the source directory paths.
-	Select menu: 'View->Console'. In the console window, enter the
-	following commands, then close the console window:
-
-		(gdb) directory common
-		(gdb) directory arch/nios/cpu
-		(gdb) directory arch/nios/lib
-		(gdb) directory board/altera/dk1c20
-
-	Note that the last command is for the DK1C20 board only. If you
-	are using another board, specify that board's directory.
-
-	7.  Open the file board.c (using the file menu in the lower
-	left hand corner). Scroll to the board_init() routine and set
-	a breakpoint.
-
-	8. Run U-Boot. Just click on the run icon, or select menu:
-	'Run->Run'. U-Boot should start running, then break at your
-	breakpoint.
-
-	9.  Have fun & start learning more about gdb.
-
-
-5.3 For advanced Users
-----------------------
-A few notes for those more familiar with gdb.
-
-	-Serial port stubs are not implemented. Sorry, but it's just not
-	worth _my_ effort. The JTAG stubs work great and are ridiculously
-	simple to implement.
-
-	-If you need to debug the early startup code (prior to the vector
-	table initialization), use the nios-console debugger.
-
-	- Connect, download & run -- there are some problems here. Connect
-	download and run seperately to avoid trouble.
-
-6. BRAIN DAMAGE
-----------------
-
-This section describes some of the unfortunate and avoidable aspects
-of working with the Nios CPU ... and some things you can do to
-reduce your pain.
-
-6.1 GERMS doesn't work with Hyperterminal
-------------------------------------------
-GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
-(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
-sad design decision is remedied by using U-Boot.
-
-6.2 cygwin Incompatibility
----------------------------
-The version of cygwin distributed with the nios GNUPro toolchain is
-out-of-date and incompatible with the latest cygwin distributions.
-In addition, many of the standard utilities are very dated as well.
-If you try to download and build the lastest version of grep for
-example, you'll quickly realize that a native gcc is not available
-(the next topic) which leads to U-Boot build problems (following
-topic).
-
-The solution ... well, you can wait for Altera ... or build as
-set of tools for linux.
-
-6.3 No native gcc
-------------------
-I'm not sure how this one slipped through the cracks ... but it is
-a real pain. Basically, if you want to build anything for the native
-environment -- forget it! A native (cygwin) gcc is not distributed,
-and the old version of cygwin makes locating one challenging.
-
-The solution ... same as above. Just download the gcc source from
-Altera and build up a set of cross tools for your favorite linux
-distro. Anybody who wants to use an already precompiled NIOS cross
-toolchain can it found in the CDK4NIOS project hosted by Source
-Forge at http://cdk4nios.sourceforge.net.
-
-6.4 Can't build default U-Boot
--------------------------------
-By default, when you build U-Boot you will be building some native
-tools along with the target elf, bin, and srec files. Without a
-native gcc, this (obviously) causes problems.
-
-For developers using the Altera cygwin tools you can remove the
-'tools' directory from SUBDIRS in the top-level Makefile. You will
-also have to edit common/Makefile:
-
-Replace:
-env_embedded.o: env_embedded.c ../tools/envcrc
-	$(CC) $(AFLAGS) -Wa,--no-warn \
-		-DENV_CRC=$(shell ../tools/envcrc) \
-		-c -o $@ env_embedded.c
-
-With:
-env_embedded.o: env_embedded.c
-	$(CC) $(AFLAGS) -Wa,--no-warn \
-		-DENV_CRC=0 \
-		-c -o $@ env_embedded.c
-
-BTW, thats a 'zero' ... not the letter 'O'. And not that the
-"../tools/envcrc" dependency is removed.
-
-
-7. HELP WANTED
----------------
-
-There are plenty of areas where help is needed. Here's are some ideas
-for those interested in contributing:
-
--CompactFlash. Port & test CF/FAT.
-
--Bedbug. Develop bedbug for Nios ... or at least provide a disassemble
- command.
-
--Add boot support for ucLinux (niosnommu).
-
--Implement (don't copy Altera code) the __mulxx routines using the
- MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP).
-
-
-Regards,
-
---Scott
-<smcnutt@psyent.com>
-
---Stephan
-<linz@li-pro.net>
diff --git a/doc/README.nios_CONFIG_SYS_NIOS_CPU b/doc/README.nios_CONFIG_SYS_NIOS_CPU
deleted file mode 100644
index 3547c343bdf..00000000000
--- a/doc/README.nios_CONFIG_SYS_NIOS_CPU
+++ /dev/null
@@ -1,140 +0,0 @@
-
-===============================================================================
-	C F G _ N I O S _ C P U _ *   v s .   N I O S	S D K
-===============================================================================
-
-When ever you have to make a new NIOS CPU configuration you can use this table
-as a reference list to the original NIOS SDK symbols made by Alteras SOPC
-Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
-Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
-(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
-
-C O R E					N I O S	  S D K			[1],[7]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_CLK					nasys_clock_freq
-CONFIG_SYS_NIOS_CPU_ICACHE					nasys_icache_size
-CONFIG_SYS_NIOS_CPU_DCACHE					nasys_dcache_size
-CONFIG_SYS_NIOS_CPU_REG_NUMS					nasys_nios_num_regs
-CONFIG_SYS_NIOS_CPU_MUL					__nios_use_multiply__
-CONFIG_SYS_NIOS_CPU_MSTEP					__nios_use_mstep__
-CONFIG_SYS_NIOS_CPU_STACK					nasys_stack_top
-CONFIG_SYS_NIOS_CPU_VEC_BASE					nasys_vector_table
-CONFIG_SYS_NIOS_CPU_VEC_SIZE					nasys_vector_table_size
-CONFIG_SYS_NIOS_CPU_VEC_NUMS
-CONFIG_SYS_NIOS_CPU_RST_VECT					nasys_reset_address
-CONFIG_SYS_NIOS_CPU_DBG_CORE					nasys_debug_core
-CONFIG_SYS_NIOS_CPU_RAM_BASE		na_onchip_ram_64_kbytes
-CONFIG_SYS_NIOS_CPU_RAM_SIZE		na_onchip_ram_64_kbytes_size
-CONFIG_SYS_NIOS_CPU_ROM_BASE		na_boot_monitor_rom
-CONFIG_SYS_NIOS_CPU_ROM_SIZE		na_boot_monitor_rom_size
-CONFIG_SYS_NIOS_CPU_OCI_BASE					nasys_oci_core
-CONFIG_SYS_NIOS_CPU_OCI_SIZE
-CONFIG_SYS_NIOS_CPU_SRAM_BASE		na_ext_ram		nasys_program_mem
-							nasys_data_mem
-CONFIG_SYS_NIOS_CPU_SRAM_SIZE		na_ext_ram_size		nasys_program_mem_size
-							nasys_data_mem_size
-CONFIG_SYS_NIOS_CPU_SDRAM_BASE		 na_sdram
-CONFIG_SYS_NIOS_CPU_SDRAM_SIZE		 na_sdram_size
-CONFIG_SYS_NIOS_CPU_FLASH_BASE		 na_ext_flash		nasys_main_flash
-							nasys_am29lv065d_flash_0
-							nasys_flash_0
-CONFIG_SYS_NIOS_CPU_FLASH_SIZE	    na_ext_flash_size		nasys_main_flash_size
-
-T I M E R				N I O S	  S D K			    [3]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_TIMER_NUMS					nasys_timer_count
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]					nasys_timer_[0-9]
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ				nasys_timer_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER				[ptf]:period
-							[ptf]:period_units
-							[ptf]:mult
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR				[ptf]:always_run
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP				[ptf]:fixed_period
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS				[ptf]:snapshot
-
-U A R T					N I O S	  S D K			    [2]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_UART_NUMS					nasys_uart_count
-CONFIG_SYS_NIOS_CPU_UART[0-9]					nasys_uart_[0-9]
-CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ				nasys_uart_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_UART[0-9]_BR				[ptf]:baud
-CONFIG_SYS_NIOS_CPU_UART[0-9]_DB				[ptf]:data_bits
-CONFIG_SYS_NIOS_CPU_UART[0-9]_SB				[ptf]:stop_bits
-CONFIG_SYS_NIOS_CPU_UART[0-9]_PA				[ptf]:parity
-CONFIG_SYS_NIOS_CPU_UART[0-9]_HS				[ptf]:use_cts_rts
-CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP				[ptf]:use_eop_register
-
-P I O					N I O S	  S D K			    [4]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_PIO_NUMS					nasys_pio_count
-CONFIG_SYS_NIOS_CPU_PIO[0-9]					nasys_pio_[0-9]
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ				nasys_pio_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS				[ptf]:Data_Width
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE				[ptf]:has_tri
-							[ptf]:has_out
-							[ptf]:has_in
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP				[ptf]:capture
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE				[ptf]:edge_type
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE				[ptf]:irq_type
-
-S P I					N I O S	  S D K			    [6]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_SPI_NUMS					nasys_spi_count
-CONFIG_SYS_NIOS_CPU_SPI[0-9]					nasys_spi_[0-9]
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ				nasys_spi_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS				[ptf]:databits
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA				[ptf]:ismaster
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN				[ptf]:numslaves
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK				[ptf]:targetclock
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY				[ptf]:targetdelay
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_*					[ptf]:*
-
-I D E					N I O S	  S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_IDE_NUMS					nasys_usersocket_count
-CONFIG_SYS_NIOS_CPU_IDE[0-9]					nasys_usersocket_[0-9]
-
-A S M I					N I O S	  S D K			    [5]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_ASMI_NUMS					nasys_asmi_count
-CONFIG_SYS_NIOS_CPU_ASMI[0-9]					nasys_asmi_[0-9]
-CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ				nasys_asmi_[0-9]_irq
-
-E t h e r n e t	  ( L A N )		N I O S	  S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_LAN_NUMS
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE	na_lan91c111
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS				LAN91C111_REGISTERS_OFFSET
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ	na_lan91c111_irq
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW				LAN91C111_DATA_BUS_WIDTH
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE
-
-s y s t e m   c o m p o s i n g		N I O S	  S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_TICK_TIMER		(na_low_priority_timer2)
-CONFIG_SYS_NIOS_CPU_USER_TIMER		(na_timer1)
-CONFIG_SYS_NIOS_CPU_BUTTON_PIO		(na_button_pio)
-CONFIG_SYS_NIOS_CPU_LCD_PIO		(na_lcd_pio)
-CONFIG_SYS_NIOS_CPU_LED_PIO		(na_led_pio)
-CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO	(na_seven_seg_pio)
-CONFIG_SYS_NIOS_CPU_RECONF_PIO		(na_reconfig_request_pio)
-CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO	(na_cf_present_pio)
-CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	(na_cf_power_pio)
-CONFIG_SYS_NIOS_CPU_CFATASEL_PIO	(na_cf_ata_select_pio)
-CONFIG_SYS_NIOS_CPU_USER_SPI		(na_spi)
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/ds/ds_nioscpu.pdf
-[2]	http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3]	http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4]	http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5]	http://www.altera.com/literature/ds/ds_nios_asmi.pdf
-[6]	http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[7]	http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.nios_DK b/doc/README.nios_DK
deleted file mode 100644
index b119d766829..00000000000
--- a/doc/README.nios_DK
+++ /dev/null
@@ -1,192 +0,0 @@
-
-===============================================================================
-	H A R D W A R E	  O V E R V I E W
-===============================================================================
-===============|===============|===============|===============|===============
-	       |  DK20K200     |  DK1C20       |  DK1S10       |  DK1S40
----------------|---------------|---------------|---------------|---------------
-	       |	       |	       |	       |
-  Schem. Nr.   | Nios Dev.Brd. |  P06-08713-00 |  P06-08468-01 |  P06-09178-00
-	 Rev.  | pilot.	       |  01	       |  01	       |  00
-	 Date  | 2001/02/06    |  2003/02/20   |  2003/02/14   |  2003/05/14
-[1]	       |	       |	       |	       |
-===============|===============|===============|===============|===============
-	       |	       |	       |	       |
-  FPGA	       | "APEX"	       | "Cyclon"      | "Stratix"     | "Stratix"
-	       |  EP20K200E    |  EP1C20       |  EP1S10       |  EP1S40
-	       |	       |	       |
-	       | (484 FBGA)    | (400 FBGA)    | (780 FBGA)
-[2],[3],[4]    |	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  Clock (OSC)  |  33.333 MHz   |  50 MHz
-	       |	       | (with ext. supply)
-	       |
-	       |  PI49FCT3805
-[5]	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  Flash	       |  1 MByte      |  8 MByte
-	       |	       |
-	       |  AM29LV800BB  |  AM29LV065DU120REI
-	       |  8/16 bit bus |  8 bit bus
-	       |  1 chip       |  1 chip
-[6],[7]	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |	       |
-  serial       |  no such      |  4 MBits      |  no such
-  Flash	       |	       |	       |
-	       |	       |  EPCS4SI8     |
-[8]	       |	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  Compact      |  no such, as  |  see below: prototype adapter
-  Flash (CF)   |  module only  |
-	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  SRAM	       |  256 KByte    |  1 MByte
-	       |	       |
-	       |  IDT71V016S   |  IDT71V416S10PH
-	       |  32 bit bus   |  32 bit bus
-	       |  2 chips      |  2 chips
-	       |    interlaced |    interlaced
-[9],[10]       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  SDRAM	       |  SODIMM only  |  16 MByte
-	       |	       |
-	       |	       |  MT48LC4M32B2TG-7
-	       |  64 bit bus   |  32 bit bus
-	       |	       |  1 chip
-[11]	       |	       |
-===============|===============|===============|===============|===============
-	       |	       |
-  serial I/O   |  1 RS232      |  2 RS232
-	       |	       |
-	       |  LTC1386      |  MAX3237CAI
-	       |	       |
-	       |  port 1:      |  port 1:
-	       |   RxD / TxD,  |   RxD / TxD,
-	       |   RTS / CTS   |   RTS / CTS, DTR / DSR, DCD, RI
-	       |	       |
-	       |  ! ! ! ! ! !  |  port 2:      |  port 2:
-	       |  RTS/CTS can  |   RxD / TxD   |   RxD / TxD
-	       |  be RxD/TxD   |	       |   RTS / CTS, DTR / DSR
-	       |  of 2nd port  |	       |   DCD, RI
-[12],[13]      |  ! ! ! ! ! !  |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  Ethernet     |  no such, as  |  1 10BaseT / 100BaseT
-	       |  module only  |
-	       |	       |  LAN91C111-NE
-	       |	       |  32 bit bus
-	       |	       |  no external EEPROM
-	       |	       |  LEDA# for link
-	       |	       |  LEDB# for Rx / Tx
-[14]	       |	       |
-===============|===============|===============|===============|===============
-	       |	       |
-  user	       |  8	       |  no such
-  switches     |  SW[7..0]     |
-	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |
-  user push    |  4
-  buttons      |  PB[3..0]
-	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  user LEDs    |  2	       |  8
-	       |  LED[1..0]    |  LED[7..0]
-	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |
-  user seven   |  2
-  segment      |  HEX[1..0][G..A,DP]
-	       |
-===============|===============|===============|===============|===============
-	       |	       |
-  3.3V proto-  |  w/o level    |  no such -- only 5V
-  type adapter |  shift buffer |
-	       |	       |
-	       |  40 I/O pins  |
-	       |  1 card sel.  |
-	       |  1 reset out. |
-	       |  1 OSC clock  |
-	       |  1 CPU clock  |
-	       |  1 clock out. |
-	       |	       |
----------------|---------------|---------------|---------------|---------------
-	       |	       |
-  5V prototype |  with level   |  2 ports -- both card ports supplied with its
-  adapter      |  shift buffer |	     own level shift buffer
-	       |	       |
-	       |  40 I/O pins  |  port 1 & 2:
-	       |  1 card sel.  |   41 I/O pins
-	       |  1 Vee	 ? ? ? |   1 card select
-	       |  1 reset out. |   1 reset output (from dev/board)
-	       |  1 OSC clock  |   1 OSC clock	  (from dev/board)
-	       |  1 CPU clock  |   1 CPU clock	  (from dev/board)
-	       |  1 clock inp. |   1 clock input  (to dev/board)
-	       |	       |
-	       |	       |  (special) port 1:
-	       |	       |   1 CF select
-	       |	       |   1 CF present
-	       |	       |   1 CF ATA select
-	       |	       |   1 CF power
-	       |	       |
-	       |	       |  NOTE: Both card ports are prepared for raw
-	       |	       |	IDE working. You can connect such
-	       |	       |	devices directly to the 40 pin header.
-	       |	       |	The signal PDIAG (passed diagnostic)
-	       |	       |	is not connected to any I/O signal.
-	       |	       |	Card port 1 is hard wired to the on
-	       |	       |	board Copact Flash adapter together
-	       |	       |	with all other signals needed by CF
-	       |	       |	cards. Hot plug should be working too.
-[15],[16]      |	       |
-===============|===============|===============|===============|===============
-	       |	       |
-  config. CPLD |  EPM7064      |  EPM7128
-	       |	       |
-  (alternative |  decition by  |  decision by
-   FPGA conf.) |  jumper       |  push button
-	       |	       |
-	       |  FPGA config. |  FPGA config. |  FPGA config.
-	       |  from Flash   |  from Flash   |  from Flash
-	       |  only	       |  and EPCS4    |  only
-	       |	       |	       |
-===============|===============|===============|===============|===============
-===============================================================================
-
-
-===============================================================================
-	R E F E R E N C E S
-===============================================================================
-[1]	http://www.altera.com/literature/lit-nio.jsp
-[2]	http://www.altera.com/literature/lit-apx.jsp
-[3]	http://www.altera.com/literature/lit-cyc.jsp
-[4]	http://www.altera.com/literature/lit-stx.jsp
-[5]	http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf
-	http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805
-[6]	http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html
-	http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf
-[7]	http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html
-	http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf
-[8]	http://www.altera.com/literature/lit-config.html
-	http://preview.altera.com/literature/ds/micron.pdf
-[9]	http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html
-[10]	http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html
-[11]	http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7
-[12]	http://www.linear.com/prod/datasheet.html?datasheet=33
-	http://www.linear.com/pdf/1386fa.pdf
-[13]	http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en
-	http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf
-[14]	http://www.smsc.com/main/catalog/lan91c111.html
-[15]	http://www.t13.org/index.html
-[16]	http://www.compactflash.org/faqs/faq.htm
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
index 157936ed531..6d2070758de 100644
--- a/doc/uImage.FIT/source_file_format.txt
+++ b/doc/uImage.FIT/source_file_format.txt
@@ -173,8 +173,7 @@ the '/images' node should have the following layout:
   - arch : Architecture name, mandatory for types: "standalone", "kernel",
     "firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha",
     "arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
-    "sparc64", "m68k", "nios", "microblaze", "nios2", "blackfin", "avr32",
-    "st200".
+    "sparc64", "m68k", "microblaze", "nios2", "blackfin", "avr32", "st200".
   - entry : entry point address, address size is determined by
     '#address-cells' property of the root node. Mandatory for for types:
     "standalone" and "kernel".
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index 0187708e0bd..f3e1ab5c6ab 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -65,23 +65,6 @@ gd_t *global_data;
 "	lw	$25, %1($25)\n"		\
 "	jr	$25\n"			\
 	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "t9");
-#elif defined(CONFIG_NIOS)
-/*
- * %g7 holds the pointer to the global_data. %g0 is call clobbered.
- */
-#define EXPORT_FUNC(x) \
-	asm volatile (			\
-"	.globl " #x "\n"		\
-#x ":\n"				\
-"	pfx	%%hi(%0)\n"		\
-"	movi	%%g0, %%lo(%0)\n"	\
-"	add	%%g0, %%g7\n"		\
-"	ld	%%g0, [%%g0]\n"		\
-"	pfx	%1\n"			\
-"	ld	%%g0, [%%g0]\n"		\
-"	jmp	%%g0\n"			\
-"	nop	\n"			\
-	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0");
 #elif defined(CONFIG_NIOS2)
 /*
  * gp holds the pointer to the global_data, r8 is call-clobbered
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 2445f1e784d..6b3a2742e21 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -708,9 +708,6 @@ long
 do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
 	     int dols)
 {
-#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */
-    static
-#endif
     char fnamecopy[2048];
     boot_sector bs;
     volume_info volinfo;
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
deleted file mode 100644
index 2d4fc779150..00000000000
--- a/include/configs/ADNPESC1.h
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if	defined(CONFIG_NIOS_BASE_32)
-#include <configs/ADNPESC1_base_32.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS		1		/* NIOS-32 core		*/
-#define	CONFIG_ADNPESC1		1		/* SSV ADNP/ESC1 board	*/
-#define CONFIG_SYS_CLK_FREQ	CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock	*/
-#define	CONFIG_SYS_HZ			1000		/* 1 msec time tick	*/
-#define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#if	defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-
-#define	CONFIG_SYS_SRAM_BASE		CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define	CONFIG_SYS_SRAM_SIZE		CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-
-#else
-
-#undef	CONFIG_SYS_SRAM_BASE
-#undef	CONFIG_SYS_SRAM_SIZE
-
-#endif
-
-#define CONFIG_SYS_VECT_BASE		CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately -- this is very important if you plan to move your
- * memory to another place as configured at this time !!!).
- *
- *	-The heap is placed below the monitor.
- *	-Global data is placed below the heap.
- *	-The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size	*/
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-
-/* Mem addr of environment */
-#if	defined(CONFIG_NIOS_BASE_32)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
-#endif
-
-#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
-#define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
-
-#else
-#define	CONFIG_ENV_IS_NOWHERE	1		/* NO Environment	*/
-#endif
-
-/*------------------------------------------------------------------------
- * NIOS APPLICATION CODE BASE AREA
- *----------------------------------------------------------------------*/
-#if	((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
-#define	CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR	"0x2000100"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY	"0x1050000"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT	"0x105000c"
-#define	CONFIG_SYS_ADNPESC1_NIOS_APPL_END	"0x11fffff"
-#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE	"0x1200000"
-#define	CONFIG_SYS_ADNPESC1_FILESYSTEM_END	"0x17fffff"
-#else
-#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
-#endif
-#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER	"Nios"
-
-/*------------------------------------------------------------------------
- * BOOT ENVIRONMENT
- *----------------------------------------------------------------------*/
-#ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
-#define	CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF	"sled boot off; "
-#define	CONFIG_SYS_ADNPESC1_SLED_RED_BLINK	"sled red blink; "
-#else
-#define	CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
-#define	CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
-#endif
-
-#define	CONFIG_BOOTDELAY	5
-#define	CONFIG_BOOTCOMMAND						\
-	"if itest.s *$appl_ident_addr == \"$appl_ident_str\"; "		\
-	"then "								\
-		"wd off; "						\
-		CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF				\
-		"go $appl_entry_addr; "					\
-	"else "								\
-		CONFIG_SYS_ADNPESC1_SLED_RED_BLINK				\
-		"echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
-		"echo *** invalid application at $appl_entry_addr; "	\
-		"echo *** stop bootup...; "				\
-	"fi"
-
-/*------------------------------------------------------------------------
- * EXTRA ENVIRONMENT
- *----------------------------------------------------------------------*/
-#ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
-#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_ON	"sled yellow on; "
-#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF	"sled yellow off; "
-#else
-#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
-#define	CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"update_allowed=0\0"						\
-	"update_load_addr="	CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR	"\0"	\
-	"appl_entry_addr="	CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY	"\0"	\
-	"appl_end_addr="	CONFIG_SYS_ADNPESC1_NIOS_APPL_END	"\0"	\
-	"appl_ident_addr="	CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT	"\0"	\
-	"appl_ident_str="	CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER	"\0"	\
-	"appl_name=ADNPESC1/base32/linux.bin\0"				\
-	"appl_update="							\
-		"if itest.b $update_allowed != 0; "			\
-		"then "							\
-			CONFIG_SYS_ADNPESC1_SLED_YELLO_ON			\
-			"tftp $update_load_addr $appl_name; "		\
-			"protect off $appl_entry_addr $appl_end_addr; "	\
-			"era $appl_entry_addr $appl_end_addr; "		\
-			"cp.b $update_load_addr $appl_entry_addr $filesize; "\
-			CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF			\
-		"else "							\
-			"echo *** update not allowed (update_allowed=$update_allowed); "\
-		"fi\0"							\
-	"fs_base_addr="		CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE	"\0"	\
-	"fs_end_addr="		CONFIG_SYS_ADNPESC1_FILESYSTEM_END	"\0"	\
-	"fs_name=ADNPESC1/base32/romfs.img\0"				\
-	"fs_update="							\
-		"if itest.b $update_allowed != 0; "			\
-		"then "							\
-			CONFIG_SYS_ADNPESC1_SLED_YELLO_ON			\
-			"tftp $update_load_addr $fs_name; "		\
-			"protect off $fs_base_addr $fs_end_addr; "	\
-			"era $fs_base_addr $fs_end_addr; "		\
-			"cp.b $update_load_addr $fs_base_addr $filesize; "\
-			CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF			\
-		"else "							\
-			"echo *** update not allowed (update_allowed=$update_allowed); "\
-		"fi\0"							\
-	"uboot_name=ADNPESC1/base32/u-boot.bin\0"			\
-	"uboot_loadnrun="						\
-		"if ping $serverip; "					\
-		"then "							\
-			CONFIG_SYS_ADNPESC1_SLED_YELLO_ON			\
-			"tftp $update_load_addr $uboot_name; "		\
-			"wd off; "					\
-			"go $update_load_addr; "			\
-		"else "							\
-			"echo *** missing connection to $serverip; "	\
-			"echo *** check your network and try again...; "\
-		"fi\0"
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-
-#if	(CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
-#define CONFIG_BAUDRATE		CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef	CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE		115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-
-#if	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
-#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
-
-#elif	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
-
-#if	(CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
-#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
-
-#elif	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
-
-#if	(CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif	/* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * WATCHDOG (or better MAX823 supervisory circuite access)
- *----------------------------------------------------------------------*/
-#define	CONFIG_HW_WATCHDOG	1		/* board specific WD	*/
-
-#ifdef	CONFIG_HW_WATCHDOG
-
-/* MAX823 supervisor -- watchdog enable port at: */
-#if	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO0	/* PIO0		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO1	/* PIO1		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO2	/* PIO2		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO3	/* PIO3		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO4	/* PIO4		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO5	/* PIO5		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO6	/* PIO6		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO7	/* PIO7		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO8	/* PIO8		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
-#define	CONFIG_HW_WDENA_BASE	CONFIG_SYS_NIOS_CPU_PIO9	/* PIO9		*/
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
-#endif
-
-/* MAX823 supervisor -- watchdog trigger port at: */
-#if	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO0	/* PIO0		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO1	/* PIO1		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO2	/* PIO2		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO3	/* PIO3		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO4	/* PIO4		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO5	/* PIO5		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO6	/* PIO6		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO7	/* PIO7		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO8	/* PIO8		*/
-#elif	(CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
-#define	CONFIG_HW_WDTOG_BASE	CONFIG_SYS_NIOS_CPU_PIO9	/* PIO9		*/
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
-#endif
-
-#if	defined(CONFIG_NIOS_BASE_32)		/* NIOS CPU specifics	*/
-#define	CONFIG_HW_WDENA_BIT		0	/* WD enable  @ Bit 0	*/
-#define	CONFIG_HW_WDTOG_BIT		0	/* WD trigger @ Bit 0	*/
-#define	CONFIG_HW_WDPORT_WRONLY	1	/* each WD port wr/only*/
-#else
-#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
-#endif
-
-#endif	/* CONFIG_HW_WATCHDOG */
-
-/*------------------------------------------------------------------------
- * SERIAL PERIPHAREL INTERFACE
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
-
-#define	CONFIG_NIOS_SPI		1		/* SPI support active	*/
-#define	CONFIG_SYS_NIOS_SPIBASE	CONFIG_SYS_NIOS_CPU_SPI0
-#define	CONFIG_SYS_NIOS_SPIBITS	CONFIG_SYS_NIOS_CPU_SPI0_BITS
-
-#define	CONFIG_RTC_DS1306	1	/* Dallas 1306 real time clock	*/
-#define CONFIG_SYS_SPI_RTC_DEVID	0	/*        as 1st SPI device	*/
-
-#else
-#undef	CONFIG_NIOS_SPI				/* NO SPI support	*/
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet -- needs work!
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
-
-#define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
-#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
-#define	CONFIG_SMC91111_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define	CONFIG_SMC_USE_32_BIT	1
-#else	/* no */
-#undef	CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
-
-	/********************************************/
-	/* !!! CS8900 is __not__ tested on NIOS !!! */
-	/********************************************/
-#define CONFIG_NET_MULTI
-#define	CONFIG_CS8900		/* Using CS8900		*/
-#define	CONFIG_CS8900_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
-				CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef	CONFIG_CS8900_BUS16
-#define	CONFIG_CS8900_BUS32
-#else	/* no */
-#define	CONFIG_CS8900_BUS16
-#undef	CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR		02:80:ae:20:60:6f
-#define CONFIG_NETMASK		255.255.255.248
-#define CONFIG_IPADDR		192.168.161.84
-#define CONFIG_SERVERIP		192.168.161.85
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-
-#if	(CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO0
-#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO0_BITS
-#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
-#define	STATUS_LED_WRONLY		1
-#else
-#undef	STATUS_LED_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO1
-#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO1_BITS
-#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
-#define	STATUS_LED_WRONLY		1
-#else
-#undef	STATUS_LED_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO2
-#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define	STATUS_LED_WRONLY		1
-#else
-#undef	STATUS_LED_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define	CONFIG_STATUS_LED		1 /* enable status led driver */
-
-#define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
-#define	STATUS_LED_STATE		STATUS_LED_BLINKING
-#define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)	/* ca. 1 Hz */
-#define	STATUS_LED_BOOT			0		/* boot LED */
-
-#if	(STATUS_LED_BITS > 1)
-#define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
-#define	STATUS_LED_STATE1		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 10)	/* ca. 5 Hz */
-#define	STATUS_LED_RED			1		/* fail LED */
-#endif
-
-#if	(STATUS_LED_BITS > 2)
-#define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
-#define	STATUS_LED_STATE2		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 2)	/* ca. 1 Hz */
-#define	STATUS_LED_YELLOW		2		/* info LED */
-#endif
-
-#if	(STATUS_LED_BITS > 3)
-#define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
-#define	STATUS_LED_STATE3		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 2)	/* ca. 1 Hz */
-#define	STATUS_LED_GREEN		3		/* info LED */
-#endif
-
-#define	STATUS_LED_PAR			1 /* makes status_led.h happy */
-
-#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * Diagnostics / Power On Self Tests
- *----------------------------------------------------------------------*/
-#define	CONFIG_POST			CONFIG_SYS_POST_RTC
-#define	CONFIG_SYS_NIOS_POST_WORD_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SPI
-#endif
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define	CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define	CONFIG_SYS_HUSH_PARSER		1	    /* use "hush" command parser
-					       undef to save memory	*/
-#define	CONFIG_SYS_PROMPT		"ADNPESC1 > " /* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		64	    /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
-
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"[]> "
-#endif
-
-/* Default load address	*/
-#if	(CONFIG_SYS_SRAM_SIZE != 0)
-
-/* default in SRAM */
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SRAM_BASE
-
-#elif	(CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* default in SDRAM */
-#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#if 1
-#define	CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define	CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x400000)
-#endif
-#else
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
-#endif
-
-#else
-#undef	CONFIG_SYS_LOAD_ADDR		/* force error break */
-#endif
-
-/* MEM test area */
-#if	(CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* SDRAM begin to stack area (1MB stack) */
-#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#if 0
-#define	CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define	CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x400000)
-#endif
-#else
-#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#endif
-
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
-
-#else
-#undef	CONFIG_SYS_MEMTEST_START	/* force error break */
-#undef	CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		""
-#define MTDPARTS_DEFAULT	""
-*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/ADNPESC1_base_32.h b/include/configs/ADNPESC1_base_32.h
deleted file mode 100644
index 1fe8d095be4..00000000000
--- a/include/configs/ADNPESC1_base_32.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_ADNPESC1_BASE_32_H
-#define __CONFIG_ADNPESC1_BASE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/ADNPESC1.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be undefined or defined with zero, example CPU without data cache / OCI:
- *
- *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
- *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
- *	#undef	CONFIG_SYS_NIOS_CPU_OCI_BASE
- *	#undef	CONFIG_SYS_NIOS_CPU_OCI_SIZE
- */
-
-/* CPU core */
-#define	CONFIG_SYS_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CONFIG_SYS_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
-#define	CONFIG_SYS_NIOS_CPU_DCACHE	(0)		/* data cache		*/
-#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	512		/* number of register	*/
-#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_STACK	0x03000000	/* stack top	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x02000000	/* IRQ vectors	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
-						/*		yes(1)	*/
-
-/* The offset address in flash to check for the Nios signature "Ni".
- * (see GM_FlashExec in germs_monitor.s) */
-#define	CONFIG_SYS_NIOS_CPU_EXES_OFFS	0x0C
-
-/* on-chip extensions */
-#undef	CONFIG_SYS_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
-
-#undef	CONFIG_SYS_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_OCI_SIZE			/*		size	*/
-
-/* timer */
-#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
-
-#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial i/o */
-#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
-
-#define	CONFIG_SYS_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_HS	1		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_UART1	0x00000820	/* UART1	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_DB	8		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial peripheral i/o */
-#define	CONFIG_SYS_NIOS_CPU_SPI_NUMS	1		/* number of spis	*/
-
-#define	CONFIG_SYS_NIOS_CPU_SPI0	0x000008c0	/* SPI0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_IRQ	25		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_BITS	16		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_MA	1		/*  is master:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_SLN	1		/*  num slaves		*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_TCLK	250000		/*  clock (Hz)		*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_TDELAY 2		/*  delay (usec)	*/
-#define	CONFIG_SYS_NIOS_CPU_SPI0_FB	0		/*  first bit	msb(0)	*/
-						/*		lsb(1)	*/
-
-/* parallel i/o */
-#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	14		/* number of parports	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	8		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	8		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO2	0x00000880	/* PIO2		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_BITS	4		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00000890	/* PIO3		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00000890	/* PIO3		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO4	0x000008a0	/* PIO4		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO5	0x000008b0	/* PIO5		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO5_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO6	0x00000900	/* PIO6		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_IRQ	20		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_ITYPE	1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO7	0x00000910	/* PIO7		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_IRQ	31		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_ITYPE	1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO8	0x00000920	/* PIO8		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO8_IRQ	32		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO8_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO8_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO8_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO8_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO8_ITYPE	1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO9	0x00000930	/* PIO9		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO9_IRQ	33		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO9_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO9_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO9_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO9_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO9_ITYPE	1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO10	0x00000940	/* PIO10	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO10_IRQ	34		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO10_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO10_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO10_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO10_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO10_ITYPE 1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO11	0x00000950	/* PIO11	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO11_IRQ	35		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO11_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO11_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO11_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO11_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO11_ITYPE 1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO12	0x00000960	/* PIO12	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO12_IRQ	36		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO12_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO12_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO12_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO12_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO12_ITYPE 1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO13	0x00000970	/* PIO113	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO13_IRQ	37		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO13_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO13_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO13_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO13_EDGE	2		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO13_ITYPE 1		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-/* IDE i/f */
-#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	2		/* number of IDE contr.	*/
-
-#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00001000	/* IDE0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_IDE0_IRQ	36		/*		IRQ	*/
-
-#define	CONFIG_SYS_NIOS_CPU_IDE1	0x00001020	/* IDE1		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_IDE1_IRQ	37		/*		IRQ	*/
-
-/* memory accessibility */
-#undef	CONFIG_SYS_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x02000000	/* board SDRAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x01000000	/* board Flash	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
-
-/* LAN */
-#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
-
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	(0)		/*		offset	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	16		/*	        buswidth*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
-						/*	cs8900(1)	*/
-						/* ex:	openmac(2)	*/
-						/* ex:	alteramac(3)	*/
-
-/* external extension */
-#define	CONFIG_SYS_NIOS_CPU_CS0_BASE	0x40000000	/* board EXT0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_CS0_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_CS1_BASE	0x41000000	/* board EXT1	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_CS1_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_CS2_BASE	0x42000000	/* board EXT2	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_CS2_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_CS3_BASE	0x43000000	/* board EXT3	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_CS3_SIZE	(16*1024*1024)	/*  max. 16 MB	size	*/
-
-/* symbolic redefinition (undef, if not present) */
-#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
-#undef	CONFIG_SYS_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PORTA_PIO		0	/* PIO0: Port A		*/
-#define	CONFIG_SYS_NIOS_CPU_PORTB_PIO		1	/* PIO1: Port D		*/
-#define	CONFIG_SYS_NIOS_CPU_PORTC_PIO		2	/* PIO2: Port C		*/
-#define	CONFIG_SYS_NIOS_CPU_RCM_PIO		3	/* PIO3: RCM jumper	*/
-#define	CONFIG_SYS_NIOS_CPU_WDENA_PIO		4	/* PIO4: watchdog enable*/
-#define	CONFIG_SYS_NIOS_CPU_WDTOG_PIO		5	/* PIO5: watchdog trigg.*/
-
-/* PIOx: LED bar */
-#ifdef	CONFIG_DNPEVA2			/* DNP/EVA2 base board */
-#define	CONFIG_SYS_NIOS_CPU_LED_PIO		CONFIG_SYS_NIOS_CPU_PORTA_PIO
-#else
-#undef	CONFIG_SYS_NIOS_CPU_LED_PIO			/* no LED bar		*/
-#endif
-
-#endif	/* __CONFIG_ADNPESC1_BASE_32_H */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
deleted file mode 100644
index cdc488b38e2..00000000000
--- a/include/configs/DK1C20.h
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * Stephan Linz <linz@li-pro.net>
- *
- * CompactFlash/IDE:
- * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if	defined(CONFIG_NIOS_SAFE_32)
-#include <configs/DK1C20_safe_32.h>
-#elif	defined(CONFIG_NIOS_STANDARD_32)
-#include <configs/DK1C20_standard_32.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS		1		/* NIOS-32 core		*/
-#define	CONFIG_DK1C20		1		/* Cyclone DK-1C20 board*/
-#define CONFIG_SYS_CLK_FREQ	CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock	*/
-#define	CONFIG_SYS_HZ			1000		/* 1 msec time tick	*/
-#define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#define CONFIG_SYS_SRAM_BASE		CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE		CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-#define CONFIG_SYS_VECT_BASE		CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately).
- *
- *	-The heap is placed below the monitor.
- *	-Global data is placed below the heap.
- *	-The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE	/* Mem addr of env	*/
-#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
-#define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
-
-#else
-#define	CONFIG_ENV_IS_NOWHERE	1		/* NO Environment	*/
-#endif
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-
-#if	(CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
-#define CONFIG_BAUDRATE		CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef	CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE		115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0)
-
-#if	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
-#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
-
-#elif	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
-
-#if	(CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
-#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
-
-#elif	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
-
-#if	(CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif	/* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
-
-#define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
-#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
-#define	CONFIG_SMC91111_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define	CONFIG_SMC_USE_32_BIT	1
-#else	/* no */
-#undef	CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
-
-	/********************************************/
-	/* !!! CS8900 is __not__ tested on NIOS !!! */
-	/********************************************/
-#define CONFIG_NET_MULTI
-#define	CONFIG_CS8900		/* Using CS8900		*/
-#define	CONFIG_CS8900_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
-				CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef	CONFIG_CS8900_BUS16
-#define	CONFIG_CS8900_BUS32
-#else	/* no */
-#define	CONFIG_CS8900_BUS16
-#undef	CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.2.21
-#define CONFIG_SERVERIP		192.168.2.16
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
-
-#if	(CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO2
-#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define	STATUS_LED_WRONLY		1
-#else
-#undef	STATUS_LED_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define	CONFIG_STATUS_LED		1 /* enable status led driver */
-
-#define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
-#define	STATUS_LED_STATE		STATUS_LED_BLINKING
-#define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
-#define	STATUS_LED_BOOT			0		/* boot LED */
-
-#if	(STATUS_LED_BITS > 1)
-#define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
-#define	STATUS_LED_STATE1		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 50)	/* ca. 5 Hz */
-#define	STATUS_LED_RED			1		/* fail LED */
-#endif
-
-#if	(STATUS_LED_BITS > 2)
-#define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
-#define	STATUS_LED_STATE2		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
-#define	STATUS_LED_YELLOW		2		/* info LED */
-#endif
-
-#if	(STATUS_LED_BITS > 3)
-#define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
-#define	STATUS_LED_STATE3		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
-#define	STATUS_LED_GREEN		3		/* info LED */
-#endif
-
-#define	STATUS_LED_PAR			1 /* makes status_led.h happy */
-
-#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * SEVEN SEGMENT LED DISPLAY
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
-
-#if	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
-
-#define	SEVENSEG_BASE			CONFIG_SYS_NIOS_CPU_PIO3
-#define	SEVENSEG_BITS			CONFIG_SYS_NIOS_CPU_PIO3_BITS
-#define	SEVENSEG_ACTIVE			0 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
-#define	SEVENSEG_WRONLY			1
-#else
-#undef	SEVENSEG_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
-#endif
-
-#define	CONFIG_SEVENSEG			1 /* enable seven segment led driver */
-
-/*
- * Dual 7-Segment Display pin assignment -- read more in your
- * "Nios Development Board Reference Manual"
- *
- *
- *    (U8) HI:D[15..8]     (U9) LO:D[7..0]
- *         ______               ______
- *        |  D14 |             |  D6  |
- *        |      |             |      |
- *      D9|      |D13        D1|      |D5
- *        |______|             |______|                  ___
- *        |  D8  |             |  D0  |                 | A |
- *        |      |             |      |                F|___|B
- *     D10|      |D12        D2|      |D4               | G |
- *        |______|             |______|                E|___|C
- *           D11  *               D3   *                  D  *
- *                D15                  D7                    DP
- *
- */
-#define	SEVENSEG_DIGIT_HI_LO_EQUAL	1	/* high nibble equal low nibble */
-#define	SEVENSEG_DIGIT_A		(1 << 6) /* bit 6 is segment A */
-#define	SEVENSEG_DIGIT_B		(1 << 5) /* bit 5 is segment B */
-#define	SEVENSEG_DIGIT_C		(1 << 4) /* bit 4 is segment C */
-#define	SEVENSEG_DIGIT_D		(1 << 3) /* bit 3 is segment D */
-#define	SEVENSEG_DIGIT_E		(1 << 2) /* bit 2 is segment E */
-#define	SEVENSEG_DIGIT_F		(1 << 1) /* bit 1 is segment F */
-#define	SEVENSEG_DIGIT_G		(1 << 0) /* bit 0 is segment G */
-#define	SEVENSEG_DIGIT_DP		(1 << 7) /* bit 7 is decimal point */
-
-#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * ASMI - Active Serial Memory Interface.
- *
- * ASMI is for Cyclone devices only and only works when the configuration
- * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS_ASMI			   /* Enable ASMI	*/
-#define CONFIG_SYS_NIOS_ASMIBASE	CONFIG_SYS_NIOS_CPU_ASMI0 /* ASMI base address	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-/*------------------------------------------------------------------------
- * COMPACT FLASH
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_IDE)
-#define CONFIG_IDE_PREINIT			/* Implement id_preinit	*/
-#define CONFIG_SYS_IDE_MAXBUS		1		/* 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0x00920a00	/* IDE/ATA base addr	*/
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000		/* IDE0 offset		*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0040		/* Data IO offset	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0040		/* Register offset	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100		/* Alternate reg offset	*/
-#define CONFIG_SYS_ATA_STRIDE          4		/* Width betwix addrs	*/
-#define CONFIG_DOS_PARTITION
-
-/* Board-specific cf regs */
-#define CONFIG_SYS_CF_PRESENT		0x009209b0	/* CF Present PIO base	*/
-#define CONFIG_SYS_CF_POWER		0x009209c0	/* CF Power FET PIO base*/
-#define CONFIG_SYS_CF_ATASEL		0x009209d0	/* CF ATASEL PIO base	*/
-
-#endif
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define	CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define	CONFIG_SYS_PROMPT		"DK1C20 > " /* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16	    /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
-
-#if	(CONFIG_SYS_SRAM_SIZE != 0)
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SRAM_BASE	/* Default load address	*/
-#else
-#undef	CONFIG_SYS_LOAD_ADDR
-#endif
-
-#if	(CONFIG_SYS_SDRAM_SIZE != 0)
-#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE	/* SDRAM til stack area */
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024)) /* 1MB stack */
-#else
-#undef	CONFIG_SYS_MEMTEST_START
-#undef	CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		""
-#define MTDPARTS_DEFAULT	""
-*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/DK1C20_safe_32.h b/include/configs/DK1C20_safe_32.h
deleted file mode 100644
index 86e4869f13f..00000000000
--- a/include/configs/DK1C20_safe_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1C20_SAFE_32_H
-#define __CONFIG_DK1C20_SAFE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1C20.h)
- *
- * !!! TODO !!! TODO !!!
- */
-#error *** CONFIG_SYS_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
-
-#endif	/* __CONFIG_DK1C20_SAFE_32_H */
diff --git a/include/configs/DK1C20_standard_32.h b/include/configs/DK1C20_standard_32.h
deleted file mode 100644
index c08aaae0196..00000000000
--- a/include/configs/DK1C20_standard_32.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1C20_STANDARD_32_H
-#define __CONFIG_DK1C20_STANDARD_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1C20.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
- *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
- *	#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0
- *	#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	0
- */
-
-/* CPU core */
-#define	CONFIG_SYS_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CONFIG_SYS_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
-#define	CONFIG_SYS_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
-#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	256		/* number of register	*/
-#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
-						/*		yes(1)	*/
-
-/* on-chip extensions */
-#define	CONFIG_SYS_NIOS_CPU_RAM_BASE	0		/* on chip RAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_RAM_SIZE	0		/*		size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	256		/*		size	*/
-
-/* timer */
-#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
-
-#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial i/o */
-#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
-
-#define	CONFIG_SYS_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-/* parallel i/o */
-#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-/* IDE i/f */
-#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
-
-/* active serial memory i/f */
-#define	CONFIG_SYS_NIOS_CPU_ASMI_NUMS	1		/* number of ASMI	*/
-#define	CONFIG_SYS_NIOS_CPU_ASMI0	0x00920b00	/* ASMI0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_ASMI0_IRQ	45		/*		IRQ	*/
-
-/* memory accessibility */
-#define	CONFIG_SYS_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
-
-/* LAN */
-#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
-
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
-						/*	cs8900(1)	*/
-						/* ex:	alteramac(2)	*/
-
-/* symbolic redefinition (undef, if not present) */
-#define	CONFIG_SYS_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
-#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
-
-#define	CONFIG_SYS_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
-#define	CONFIG_SYS_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
-#define	CONFIG_SYS_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
-#define	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
-#define	CONFIG_SYS_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
-#define	CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
-#define	CONFIG_SYS_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
-
-#endif	/* __CONFIG_DK1C20_STANDARD_32_H */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
deleted file mode 100644
index 6e788610fde..00000000000
--- a/include/configs/DK1S10.h
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if	defined(CONFIG_NIOS_SAFE_32)
-#include <configs/DK1S10_safe_32.h>
-#elif	defined(CONFIG_NIOS_STANDARD_32)
-#include <configs/DK1S10_standard_32.h>
-#elif	defined(CONFIG_NIOS_MTX_LDK_20)
-#include <configs/DK1S10_mtx_ldk_20.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS		1		/* NIOS-32 core		*/
-#define	CONFIG_DK1S10		1		/* Stratix DK-1S10 board*/
-#define CONFIG_SYS_CLK_FREQ	CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock	*/
-#define	CONFIG_SYS_HZ			1000		/* 1 msec time tick	*/
-#define	CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#if	defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-
-#define	CONFIG_SYS_SRAM_BASE		CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define	CONFIG_SYS_SRAM_SIZE		CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-
-#else
-
-#undef	CONFIG_SYS_SRAM_BASE
-#undef	CONFIG_SYS_SRAM_SIZE
-
-#endif
-
-#define CONFIG_SYS_VECT_BASE		CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately).
- *
- *	-The heap is placed below the monitor.
- *	-Global data is placed below the heap.
- *	-The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP		CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE		CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT	128		/* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define	CONFIG_ENV_IS_IN_FLASH	1		/* Environment in flash */
-
-#if	defined(CONFIG_NIOS_STANDARD_32)
-#define CONFIG_ENV_ADDR		CONFIG_SYS_FLASH_BASE	/* Mem addr of env	*/
-#elif	defined(CONFIG_NIOS_MTX_LDK_20)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
-#endif
-
-#define CONFIG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
-#define CONFIG_ENV_OVERWRITE			/* Serial/eth change Ok */
-
-#else
-#define	CONFIG_ENV_IS_NOWHERE	1		/* NO Environment	*/
-#endif
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-#define CONFIG_LOADS_ECHO	1	 /* echo on for serial download */
-
-#if	(CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD	1		   /* Baudrate is fixed	*/
-#define CONFIG_BAUDRATE		CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef	CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE		115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc  PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-
-#if	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick	*/
-#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1)		    /* fixed period */
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
-
-#elif	(CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0)		    /* variable period */
-
-#if	(CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick	*/
-#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1)		    /* fixed period */
-
-#if	(CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS		(CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef	CONFIG_SYS_NIOS_TMRCNT	/* no preloadable counter value */
-
-#elif	(CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0)		    /* variable period */
-
-#if	(CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS		(1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define	CONFIG_SYS_NIOS_TMRCNT		(CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif	/* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet -- needs work!
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0)		/* LAN91C111		*/
-
-#define	CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
-#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
-#define	CONFIG_SMC91111_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define	CONFIG_SMC_USE_32_BIT	1
-#else	/* no */
-#undef	CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1)		/* CS8900A		*/
-
-	/********************************************/
-	/* !!! CS8900 is __not__ tested on NIOS !!! */
-	/********************************************/
-#define CONFIG_NET_MULTI
-#define	CONFIG_CS8900		/* Using CS8900		*/
-#define	CONFIG_CS8900_BASE	(CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
-				CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if	(CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef	CONFIG_CS8900_BUS16
-#define	CONFIG_CS8900_BUS32
-#else	/* no */
-#define	CONFIG_CS8900_BUS16
-#undef	CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.2.21
-#define CONFIG_SERVERIP		192.168.2.16
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-
-#if	(CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define	STATUS_LED_BASE			CONFIG_SYS_NIOS_CPU_PIO2
-#define	STATUS_LED_BITS			CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define	STATUS_LED_ACTIVE		1 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define	STATUS_LED_WRONLY		1
-#else
-#undef	STATUS_LED_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define	CONFIG_STATUS_LED		1 /* enable status led driver */
-
-#define	STATUS_LED_BIT			(1 << 0)	/* LED[0] */
-#define	STATUS_LED_STATE		STATUS_LED_BLINKING
-#define	STATUS_LED_BOOT_STATE		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
-#define	STATUS_LED_BOOT			0		/* boot LED */
-
-#if	(STATUS_LED_BITS > 1)
-#define	STATUS_LED_BIT1			(1 << 1)	/* LED[1] */
-#define	STATUS_LED_STATE1		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 50)	/* ca. 5 Hz */
-#define	STATUS_LED_RED			1		/* fail LED */
-#endif
-
-#if	(STATUS_LED_BITS > 2)
-#define	STATUS_LED_BIT2			(1 << 2)	/* LED[2] */
-#define	STATUS_LED_STATE2		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD2		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
-#define	STATUS_LED_YELLOW		2		/* info LED */
-#endif
-
-#if	(STATUS_LED_BITS > 3)
-#define	STATUS_LED_BIT3			(1 << 3)	/* LED[3] */
-#define	STATUS_LED_STATE3		STATUS_LED_OFF
-#define	STATUS_LED_PERIOD3		(CONFIG_SYS_HZ / 10)	/* ca. 1 Hz */
-#define	STATUS_LED_GREEN		3		/* info LED */
-#endif
-
-#define	STATUS_LED_PAR			1 /* makes status_led.h happy */
-
-#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * SEVEN SEGMENT LED DISPLAY
- *----------------------------------------------------------------------*/
-#if	(CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO)
-
-#if	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
-
-#define	SEVENSEG_BASE			CONFIG_SYS_NIOS_CPU_PIO3
-#define	SEVENSEG_BITS			CONFIG_SYS_NIOS_CPU_PIO3_BITS
-#define	SEVENSEG_ACTIVE			0 /* LED on for bit == 1 */
-
-#if	(CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
-#define	SEVENSEG_WRONLY			1
-#else
-#undef	SEVENSEG_WRONLY
-#endif
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
-
-#elif	(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
-#endif
-
-#define	CONFIG_SEVENSEG			1 /* enable seven segment led driver */
-
-/*
- * Dual 7-Segment Display pin assignment -- read more in your
- * "Nios Development Board Reference Manual"
- *
- *
- *    (U8) HI:D[15..8]     (U9) LO:D[7..0]
- *         ______               ______
- *        |  D14 |             |  D6  |
- *        |      |             |      |
- *      D9|      |D13        D1|      |D5
- *        |______|             |______|                  ___
- *        |  D8  |             |  D0  |                 | A |
- *        |      |             |      |                F|___|B
- *     D10|      |D12        D2|      |D4               | G |
- *        |______|             |______|                E|___|C
- *           D11  *               D3   *                  D  *
- *                D15                  D7                    DP
- *
- */
-#define	SEVENSEG_DIGIT_HI_LO_EQUAL	1	/* high nibble equal low nibble */
-#define	SEVENSEG_DIGIT_A		(1 << 6) /* bit 6 is segment A */
-#define	SEVENSEG_DIGIT_B		(1 << 5) /* bit 5 is segment B */
-#define	SEVENSEG_DIGIT_C		(1 << 4) /* bit 4 is segment C */
-#define	SEVENSEG_DIGIT_D		(1 << 3) /* bit 3 is segment D */
-#define	SEVENSEG_DIGIT_E		(1 << 2) /* bit 2 is segment E */
-#define	SEVENSEG_DIGIT_F		(1 << 1) /* bit 1 is segment F */
-#define	SEVENSEG_DIGIT_G		(1 << 0) /* bit 0 is segment G */
-#define	SEVENSEG_DIGIT_DP		(1 << 7) /* bit 7 is decimal point */
-
-#endif	/* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define	CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define	CONFIG_SYS_PROMPT		"DK1S10 > " /* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16	    /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
-
-/* Default load address	*/
-#if	(CONFIG_SYS_SRAM_SIZE != 0)
-
-/* default in SRAM */
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SRAM_BASE
-
-#elif	(CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* default in SDRAM */
-#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#define	CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
-#endif
-
-#else
-#undef	CONFIG_SYS_LOAD_ADDR		/* force error break */
-#endif
-
-
-/* MEM test area */
-#if	(CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* SDRAM begin to stack area (1MB stack) */
-#if	(CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#define	CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
-#else
-#define	CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define	CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - (1024 * 1024))
-#endif
-
-#else
-#undef	CONFIG_SYS_MEMTEST_START	/* force error break */
-#undef	CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		""
-#define MTDPARTS_DEFAULT	""
-*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h
deleted file mode 100644
index 87a8a543807..00000000000
--- a/include/configs/DK1S10_mtx_ldk_20.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_MTX_LDK_20_H
-#define __CONFIG_DK1S10_MTX_LDK_20_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
- *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
- *	#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0
- *	#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	0
- */
-
-/* CPU core */
-#define	CONFIG_SYS_NIOS_CPU_CLK	75000000	/* NIOS CPU clock	*/
-#define	CONFIG_SYS_NIOS_CPU_ICACHE	(0)		/* instruction cache	*/
-#define	CONFIG_SYS_NIOS_CPU_DCACHE	(0)		/* data cache		*/
-#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	512		/* number of register	*/
-#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_STACK	0x02000000	/* stack top	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x01000000	/* IRQ vectors	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00000000	/* RESET vector	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
-						/*		yes(1)	*/
-
-/* The offset address in flash to check for the Nios signature "Ni".
- * (see GM_FlashExec in germs_monitor.s) */
-#define	CONFIG_SYS_NIOS_CPU_EXES_OFFS	0x0C
-
-/* on-chip extensions */
-#undef	CONFIG_SYS_NIOS_CPU_RAM_BASE			/* on chip RAM	addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_RAM_SIZE			/* 64 KB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00000000	/* on chip ROM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
-
-#undef	CONFIG_SYS_NIOS_CPU_OCI_BASE			/* OCI core	addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_OCI_SIZE			/*		size	*/
-
-/* timer */
-#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	1		/* number of timer	*/
-
-#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00000840	/* TIMER0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial i/o */
-#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	2		/* number of uarts	*/
-
-#define	CONFIG_SYS_NIOS_CPU_UART0	0x00000800	/* UART0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	17		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_SB	2		/*  stop bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_UART1	0x000008a0	/* UART1	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_IRQ	18		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_BR	115200		/*  baudrate	var(0)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_DB	8		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_SB	1		/*  stop bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART1_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-/* parallel i/o */
-#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	2		/* number of parports	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00000860	/* PIO0		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO0_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00000870	/* PIO1		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	4		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-/* IDE i/f */
-#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00000900	/* IDE0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_IDE0_IRQ	25		/*		IRQ	*/
-
-/* memory accessibility */
-#undef	CONFIG_SYS_NIOS_CPU_SRAM_BASE			/* board SRAM	addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_SRAM_SIZE			/*  1 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x00800000	/* board Flash	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
-
-/* LAN */
-#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
-
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00010000	/* LAN0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	20		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
-						/*	cs8900(1)	*/
-						/* ex:	openmac(2)	*/
-						/* ex:	alteramac(3)	*/
-
-/* symbolic redefinition (undef, if not present) */
-#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		0	/* TIMER0: tick (needed)*/
-#undef	CONFIG_SYS_NIOS_CPU_USER_TIMER			/* TIMERx: users choice	*/
-
-#define	CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	0	/* PIO0: CF power/sw.	*/
-#define	CONFIG_SYS_NIOS_CPU_BUTTON_PIO		1	/* PIO1: buttons	*/
-#undef	CONFIG_SYS_NIOS_CPU_LCD_PIO			/* PIOx: ASCII LCD	*/
-#undef	CONFIG_SYS_NIOS_CPU_LED_PIO			/* PIOx: LED bar	*/
-#undef	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO		/* PIOx: 7-seg. display	*/
-#undef	CONFIG_SYS_NIOS_CPU_RECONF_PIO			/* PIOx: reconf pin	*/
-#undef	CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO		/* PIOx: CF present IRQ	*/
-#undef	CONFIG_SYS_NIOS_CPU_CFATASEL_PIO		/* PIOx: CF ATA select	*/
-
-#endif	/* __CONFIG_DK1S10_MTX_LDK_20_H */
diff --git a/include/configs/DK1S10_safe_32.h b/include/configs/DK1S10_safe_32.h
deleted file mode 100644
index ced4ef281ce..00000000000
--- a/include/configs/DK1S10_safe_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_SAFE_32_H
-#define __CONFIG_DK1S10_SAFE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * !!! TODO !!! TODO !!!
- */
-#error *** CONFIG_SYS_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
-
-#endif	/* __CONFIG_DK1S10_SAFE_32_H */
diff --git a/include/configs/DK1S10_standard_32.h b/include/configs/DK1S10_standard_32.h
deleted file mode 100644
index e6ccaf57ab0..00000000000
--- a/include/configs/DK1S10_standard_32.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_STANDARD_32_H
-#define __CONFIG_DK1S10_STANDARD_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- *	#define	CONFIG_SYS_NIOS_CPU_ICACHE	4096
- *	#define	CONFIG_SYS_NIOS_CPU_DCACHE	0
- *	#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0
- *	#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	0
- */
-
-/* CPU core */
-#define	CONFIG_SYS_NIOS_CPU_CLK	50000000	/* NIOS CPU clock	*/
-#define	CONFIG_SYS_NIOS_CPU_ICACHE	(4 * 1024)	/* instruction cache	*/
-#define	CONFIG_SYS_NIOS_CPU_DCACHE	(4 * 1024)	/* data cache		*/
-#define	CONFIG_SYS_NIOS_CPU_REG_NUMS	256		/* number of register	*/
-#define	CONFIG_SYS_NIOS_CPU_MUL	0		/* 16x16 MUL:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_MSTEP	1		/* 16x16 MSTEP:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_STACK	0x008fff00	/* stack top	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_BASE	0x008fff00	/* IRQ vectors	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_SIZE	256		/*		size	*/
-#define	CONFIG_SYS_NIOS_CPU_VEC_NUMS	64		/*		numbers	*/
-#define	CONFIG_SYS_NIOS_CPU_RST_VECT	0x00920000	/* RESET vector	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_DBG_CORE	0		/* CPU debug:	no(0)	*/
-						/*		yes(1)	*/
-
-/* on-chip extensions */
-#define	CONFIG_SYS_NIOS_CPU_RAM_BASE	0x00900000	/* on chip RAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_RAM_SIZE	(64 * 1024)	/* 64 KB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_ROM_BASE	0x00920000	/* on chip ROM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_ROM_SIZE	(2 * 1024)	/*  2 KB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_OCI_BASE	0x00920800	/* OCI core	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_OCI_SIZE	256		/*		size	*/
-
-/* timer */
-#define	CONFIG_SYS_NIOS_CPU_TIMER_NUMS	2		/* number of timer	*/
-
-#define	CONFIG_SYS_NIOS_CPU_TIMER0	0x00920940	/* TIMER0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_IRQ	16		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_PER	1000		/*  periode	usec	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_AR	0		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_FP	0		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER0_SS	1		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_TIMER1	0x009209e0	/* TIMER1	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_IRQ	50		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_PER	10000		/*  periode	usec	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_AR	1		/*  always run:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_FP	1		/*  fixed per:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_TIMER1_SS	0		/*  snaphot:	no(0)	*/
-						/*		yes(1)	*/
-
-/* serial i/o */
-#define	CONFIG_SYS_NIOS_CPU_UART_NUMS	1		/* number of uarts	*/
-
-#define	CONFIG_SYS_NIOS_CPU_UART0	0x00920900	/* UART0	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_IRQ	25		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_BR	115200		/*  baudrate	var(0)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_DB	8		/*  data bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_SB	1		/*  stop bit		*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_PA	0		/*  parity	none(0)	*/
-						/*		odd(1)	*/
-						/*		even(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_HS	0		/*  handshake:	no(0)	*/
-						/*		crts(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_UART0_EOP	0		/*  eop reg:	no(0)	*/
-						/*		yes(1)	*/
-
-/* parallel i/o */
-#define	CONFIG_SYS_NIOS_CPU_PIO_NUMS	8		/* number of parports	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO0	0x00920960	/* PIO0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_IRQ	40		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_BITS	4		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO0_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO1	0x00920970	/* PIO1		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO1_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_BITS	11		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO1_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO2	0x00920980	/* PIO2		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO2_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_BITS	8		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO2_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO3	0x00920990	/* PIO3		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO3_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_BITS	16		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO3_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO4	0x009209a0	/* PIO4		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO4_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_TYPE	0		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO4_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO5	0x009209b0	/* PIO5		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_IRQ	35		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_TYPE	2		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_CAP	1		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_EDGE	3		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO5_ITYPE	2		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO6	0x009209c0	/* PIO6		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO6_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO6_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-#define	CONFIG_SYS_NIOS_CPU_PIO7	0x009209d0	/* PIO7		addr	*/
-#undef	CONFIG_SYS_NIOS_CPU_PIO7_IRQ			/*		w/o IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_BITS	1		/*  number  of  bits	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_TYPE	1		/*  io type:	tris(0)	*/
-						/*		out(1)	*/
-						/*		in(2)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_CAP	0		/*  capture:	no(0)	*/
-						/*		yes(1)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_EDGE	0		/*  edge type:	none(0)	*/
-						/*		fall(1)	*/
-						/*		rise(2)	*/
-						/*		any(3)	*/
-#define	CONFIG_SYS_NIOS_CPU_PIO7_ITYPE	0		/*  IRQ type:	none(0)	*/
-						/*		level(1)*/
-						/*		edge(2)	*/
-
-/* IDE i/f */
-#define	CONFIG_SYS_NIOS_CPU_IDE_NUMS	1		/* number of IDE contr.	*/
-#define	CONFIG_SYS_NIOS_CPU_IDE0	0x00920a00	/* IDE0		addr	*/
-
-/* memory accessibility */
-#define	CONFIG_SYS_NIOS_CPU_SRAM_BASE	0x00800000	/* board SRAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SRAM_SIZE	(1024 * 1024)	/*  1 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_BASE	0x01000000	/* board SDRAM	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_SDRAM_SIZE	(16*1024*1024)	/* 16 MB	size	*/
-
-#define	CONFIG_SYS_NIOS_CPU_FLASH_BASE	0x00000000	/* board Flash	addr	*/
-#define	CONFIG_SYS_NIOS_CPU_FLASH_SIZE	(8*1024*1024)	/*  8 MB	size	*/
-
-/* LAN */
-#define	CONFIG_SYS_NIOS_CPU_LAN_NUMS	1		/* number of LAN i/f	*/
-
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BASE	0x00910000	/* LAN0		addr	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_OFFS	0x0300		/*		offset	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_IRQ	30		/*		IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_BUSW	32		/*	        buswidth*/
-#define	CONFIG_SYS_NIOS_CPU_LAN0_TYPE	0		/*	smc91111(0)	*/
-						/*	cs8900(1)	*/
-						/* ex:	alteramac(2)	*/
-
-/* symbolic redefinition (undef, if not present) */
-#define	CONFIG_SYS_NIOS_CPU_USER_TIMER		0	/* TIMER0: users choice	*/
-#define	CONFIG_SYS_NIOS_CPU_TICK_TIMER		1	/* TIMER1: tick (needed)*/
-
-#define	CONFIG_SYS_NIOS_CPU_BUTTON_PIO		0	/* PIO0: buttons	*/
-#define	CONFIG_SYS_NIOS_CPU_LCD_PIO		1	/* PIO1: ASCII LCD	*/
-#define	CONFIG_SYS_NIOS_CPU_LED_PIO		2	/* PIO2: LED bar	*/
-#define	CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO	3	/* PIO3: 7-seg. display	*/
-#define	CONFIG_SYS_NIOS_CPU_RECONF_PIO		4	/* PIO4: reconf pin	*/
-#define	CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO	5	/* PIO5: CF present IRQ	*/
-#define	CONFIG_SYS_NIOS_CPU_CFPOWER_PIO	6	/* PIO6: CF power/sw.	*/
-#define	CONFIG_SYS_NIOS_CPU_CFATASEL_PIO	7	/* PIO7: CF ATA select	*/
-
-#endif	/* __CONFIG_DK1S10_STANDARD_32_H */
diff --git a/include/image.h b/include/image.h
index 541cac97fe1..294eba5094b 100644
--- a/include/image.h
+++ b/include/image.h
@@ -100,7 +100,6 @@
 #define IH_ARCH_SPARC		10	/* Sparc	*/
 #define IH_ARCH_SPARC64		11	/* Sparc 64 Bit */
 #define IH_ARCH_M68K		12	/* M68K		*/
-#define IH_ARCH_NIOS		13	/* Nios-32	*/
 #define IH_ARCH_MICROBLAZE	14	/* MicroBlaze   */
 #define IH_ARCH_NIOS2		15	/* Nios-II	*/
 #define IH_ARCH_BLACKFIN	16	/* Blackfin	*/
@@ -493,8 +492,6 @@ static inline int image_check_target_arch (const image_header_t *hdr)
 	if (!image_check_arch (hdr, IH_ARCH_MICROBLAZE))
 #elif defined(__mips__)
 	if (!image_check_arch (hdr, IH_ARCH_MIPS))
-#elif defined(__nios__)
-	if (!image_check_arch (hdr, IH_ARCH_NIOS))
 #elif defined(__nios2__)
 	if (!image_check_arch (hdr, IH_ARCH_NIOS2))
 #elif defined(__PPC__)
@@ -647,8 +644,6 @@ static inline int fit_image_check_target_arch (const void *fdt, int node)
 	if (!fit_image_check_arch (fdt, node, IH_ARCH_MICROBLAZE))
 #elif defined(__mips__)
 	if (!fit_image_check_arch (fdt, node, IH_ARCH_MIPS))
-#elif defined(__nios__)
-	if (!fit_image_check_arch (fdt, node, IH_ARCH_NIOS))
 #elif defined(__nios2__)
 	if (!fit_image_check_arch (fdt, node, IH_ARCH_NIOS2))
 #elif defined(__PPC__)
diff --git a/include/nios-io.h b/include/nios-io.h
deleted file mode 100644
index dc7e127fe54..00000000000
--- a/include/nios-io.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * Altera Nios Standard Peripherals
- ************************************************************************/
-
-#ifndef __NIOSIO_H__
-#define __NIOSIO_H__
-
-/*------------------------------------------------------------------------
- * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_uart_t {
-	unsigned	rxdata;		/* Rx data reg */
-	unsigned	txdata;		/* Tx data reg */
-	unsigned	status;		/* Status reg */
-	unsigned	control;	/* Control reg */
-	unsigned	divisor;	/* Baud rate divisor reg */
-	unsigned	endofpacket;	/* End-of-packet reg */
-}nios_uart_t;
-
-/* status register */
-#define NIOS_UART_PE		(1 << 0)	/* parity error */
-#define NIOS_UART_FE		(1 << 1)	/* frame error */
-#define NIOS_UART_BRK		(1 << 2)	/* break detect */
-#define NIOS_UART_ROE		(1 << 3)	/* rx overrun */
-#define NIOS_UART_TOE		(1 << 4)	/* tx overrun */
-#define NIOS_UART_TMT		(1 << 5)	/* tx empty */
-#define NIOS_UART_TRDY		(1 << 6)	/* tx ready */
-#define NIOS_UART_RRDY		(1 << 7)	/* rx ready */
-#define NIOS_UART_E		(1 << 8)	/* exception */
-#define NIOS_UART_DCTS		(1 << 10)	/* cts change */
-#define NIOS_UART_CTS		(1 << 11)	/* cts */
-#define NIOS_UART_EOP		(1 << 12)	/* eop detected */
-
-/* control register */
-#define NIOS_UART_IPE		(1 << 0)	/* parity error int ena*/
-#define NIOS_UART_IFE		(1 << 1)	/* frame error int ena */
-#define NIOS_UART_IBRK		(1 << 2)	/* break detect int ena */
-#define NIOS_UART_IROE		(1 << 3)	/* rx overrun int ena */
-#define NIOS_UART_ITOE		(1 << 4)	/* tx overrun int ena */
-#define NIOS_UART_ITMT		(1 << 5)	/* tx empty int ena */
-#define NIOS_UART_ITRDY		(1 << 6)	/* tx ready int ena */
-#define NIOS_UART_IRRDY		(1 << 7)	/* rx ready int ena */
-#define NIOS_UART_IE		(1 << 8)	/* exception int ena */
-#define NIOS_UART_TBRK		(1 << 9)	/* transmit break */
-#define NIOS_UART_IDCTS		(1 << 10)	/* cts change int ena */
-#define NIOS_UART_RTS		(1 << 11)	/* rts */
-#define NIOS_UART_IEOP		(1 << 12)	/* eop detected int ena */
-
-
-/*------------------------------------------------------------------------
- * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_timer_t {
-	unsigned	status;			/* Timer status reg */
-	unsigned	control;		/* Timer control reg */
-	unsigned	periodl;		/* Timeout period low */
-	unsigned	periodh;		/* Timeout period high */
-	unsigned	snapl;			/* Snapshot low */
-	unsigned	snaph;			/* Snapshot high */
-}nios_timer_t;
-
-/* status register */
-#define NIOS_TIMER_TO		(1 << 0)	/* Timeout */
-#define NIOS_TIMER_RUN		(1 << 1)	/* Timer running */
-
-/* control register */
-#define NIOS_TIMER_ITO		(1 << 0)	/* Timeout int ena */
-#define NIOS_TIMER_CONT		(1 << 1)	/* Continuous mode */
-#define NIOS_TIMER_START	(1 << 2)	/* Start timer */
-#define NIOS_TIMER_STOP		(1 << 3)	/* Stop timer */
-
-
-/*------------------------------------------------------------------------
- * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_pio_t {
-	unsigned int	data;		/* Data value at each PIO in/out */
-	unsigned int	direction;	/* Data direct. for each PIO bit */
-	unsigned int	interruptmask;	/* Per-bit IRQ enable/disable */
-	unsigned int	edgecapture;	/* Per-bit sync. edge detect & hold */
-}nios_pio_t;
-
-/* direction register */
-#define NIOS_PIO_OUT		(1)		/* PIO bit is output */
-#define NIOS_PIO_IN		(0)		/* PIO bit is input */
-
-
-/*------------------------------------------------------------------------
- * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_spi_t {
-	unsigned	rxdata;		/* Rx data reg */
-	unsigned	txdata;		/* Tx data reg */
-	unsigned	status;		/* Status reg */
-	unsigned	control;	/* Control reg */
-	unsigned	reserved;	/* (master only) */
-	unsigned	slaveselect;	/* SPI slave select mask (master only) */
-}nios_spi_t;
-
-/* status register */
-#define NIOS_SPI_ROE		(1 << 3)	/* rx overrun */
-#define NIOS_SPI_TOE		(1 << 4)	/* tx overrun */
-#define NIOS_SPI_TMT		(1 << 5)	/* tx empty */
-#define NIOS_SPI_TRDY		(1 << 6)	/* tx ready */
-#define NIOS_SPI_RRDY		(1 << 7)	/* rx ready */
-#define NIOS_SPI_E		(1 << 8)	/* exception */
-
-/* control register */
-#define NIOS_SPI_IROE		(1 << 3)	/* rx overrun int ena */
-#define NIOS_SPI_ITOE		(1 << 4)	/* tx overrun int ena */
-#define NIOS_SPI_ITRDY		(1 << 6)	/* tx ready int ena */
-#define NIOS_SPI_IRRDY		(1 << 7)	/* rx ready int ena */
-#define NIOS_SPI_IE		(1 << 8)	/* exception int ena */
-#define NIOS_SPI_SSO		(1 << 10)	/* override SS_n output */
-
-/*------------------------------------------------------------------------
- * ASMI
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_asmi_t {
-	unsigned	rxdata;		/* Rx data reg */
-	unsigned	txdata;		/* Tx data reg */
-	unsigned	status;		/* Status reg */
-	unsigned	control;	/* Control reg */
-	unsigned	reserved;
-	unsigned	slavesel;	/* Slave select */
-	unsigned	endofpacket;	/* End-of-packet reg */
-}nios_asmi_t;
-
-/* status register */
-#define NIOS_ASMI_ROE		(1 << 3)	/* rx overrun */
-#define NIOS_ASMI_TOE		(1 << 4)	/* tx overrun */
-#define NIOS_ASMI_TMT		(1 << 5)	/* tx empty */
-#define NIOS_ASMI_TRDY		(1 << 6)	/* tx ready */
-#define NIOS_ASMI_RRDY		(1 << 7)	/* rx ready */
-#define NIOS_ASMI_E		(1 << 8)	/* exception */
-#define NIOS_ASMI_EOP		(1 << 9)	/* eop detected */
-
-/* control register */
-#define NIOS_ASMI_IROE		(1 << 3)	/* rx overrun int ena */
-#define NIOS_ASMI_ITOE		(1 << 4)	/* tx overrun int ena */
-#define NIOS_ASMI_ITRDY		(1 << 6)	/* tx ready int ena */
-#define NIOS_ASMI_IRRDY		(1 << 7)	/* rx ready int ena */
-#define NIOS_ASMI_IE		(1 << 8)	/* exception int ena */
-#define NIOS_ASMI_IEOP		(1 << 9)	/* rx eop int ena */
-#define NIOS_ASMI_SSO		(1 << 10)	/* slave select enable */
-
-/*------------------------------------------------------------------------
- * JTAG UART
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_jtag_t {
-	unsigned short	rxcntl;			/* Rx data/cntl reg */
-	unsigned short	txcntl;			/* Tx data/cntl reg */
-	unsigned short	errcntl;		/* Err dta/cntl reg */
-}nios_jtag_t;
-
-/* status register */
-#define NIOS_JTAG_TRDY		(1 << 8)	/* tx ready bit */
-#define NIOS_JTAG_RRDY		(1 << 8)	/* rx ready bit */
-
-#endif /* __NIOSIO_H__ */
diff --git a/include/nios.h b/include/nios.h
deleted file mode 100644
index 46b685ab9d5..00000000000
--- a/include/nios.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __NIOS_H__
-#define __NIOS_H__
-
-/*------------------------------------------------------------------------
- * Control registers -- use with wrctl() & rdctl()
- *----------------------------------------------------------------------*/
-#define CTL_STATUS	0x00		/* Processor status		*/
-#define CTL_ISTATUS	0x01		/* Saved status (exception)	*/
-#define CTL_WVALID	0x02		/* Valid window limit		*/
-#define CTL_ICACHE	0x05		/* I-cache line-invalidate	*/
-#define CTL_CPU_ID	0x06		/* CPU version id		*/
-#define CTL_DCACHE	0x07		/* D-cache line-invalidate	*/
-#define CTL_CLR_IE	0x08		/* Interrupt clear (disable)	*/
-#define CTL_SET_IE	0x09		/* Interrupt set (enable)	*/
-
-/*------------------------------------------------------------------------
- * Access to control regs
- *----------------------------------------------------------------------*/
-#define _str_(s)	#s
-
-#define rdctl(reg)\
-	({unsigned int val;\
-	asm volatile( "pfx " _str_(reg) "\n\t rdctl %0"\
-		: "=r" (val) ); val;})
-
-#define wrctl(reg,val)\
-	asm volatile( "pfx " _str_(reg) "\n\t wrctl %0 \n\t nop"\
-		: : "r" (val))
-
-/*------------------------------------------------------------------------
- * Control reg bit masks
- *----------------------------------------------------------------------*/
-#define STATUS_DC	(1<<17)		/* Data cache enable		*/
-#define STATUS_IC	(1<<16)		/* Instruction cache enable	*/
-#define STATUS_IE	(1<<15)		/* Interrupt enable		*/
-#define STATUS_IPRI	(0x3f<<9)	/* Interrupt priority		*/
-#define STATUS_CWP	(0x1f<<4)	/* Current window pointer	*/
-#define STATUS_N	(1<<3)		/* Condition code: negative	*/
-#define STATUS_V	(1<<2)		/* Condition code: overflow	*/
-#define STATUS_Z	(1<<1)		/* Condition code: zero		*/
-#define STATUS_C	(1<<0)		/* Condition code: carry/borrow */
-
-static inline unsigned ipri( unsigned prio )
-{
-	unsigned tmp;
-	unsigned status = rdctl(CTL_STATUS);
-	prio = (prio << 9) & STATUS_IPRI;
-	tmp = (status & ~STATUS_IPRI) | prio;
-	wrctl(CTL_STATUS,tmp);
-	return( (status & STATUS_IPRI) >> 9);
-}
-
-
-#endif /* __NIOS_H__ */
diff --git a/include/watchdog.h b/include/watchdog.h
index ef2f5aac9be..b9599143afd 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -31,10 +31,6 @@
 #  error "Configuration error: CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG can't be used together."
 #endif
 
-#if defined(__ASSEMBLY__) && defined(__NIOS__)
-#  error "Configuration error: WATCHDOG_RESET inside assembler not supported for Nios platforms."
-#endif
-
 /*
  * Hardware watchdog
  */