powerpc/mpc85xx: new SPL support for IFC NAND

Linker script is not able find start.o binary. So add its absolute path in
u-boot-spl.lds. This change is similar to u-boot-nand.lds

common/Makefile: Avoid compiling unnecssary files

fsl_ifc_spl.c : It is is responsible for reading u-boot binary from
NAND flash and copying into DDR. It also transfer control from NAND SPL
to u-boot image present in DDR.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

4 files changed, 270 insertions, 1 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
index f2b7bffdab..cf6fa7c936 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -60,7 +60,7 @@ SECTIONS
 #if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
 	.bootpg ADDR(.text) + 0x1000 :
 	{
-		start.o	(.bootpg)
+		arch/powerpc/cpu/mpc85xx/start.o (.bootpg)
 	}
 #define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
 #elif defined(CONFIG_FSL_ELBC)
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 72bb56cac4..37236d072b 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -29,6 +29,15 @@ endif
 
 LIB	= $(obj)libfreescale.o
 
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifndef MINIMAL
 COBJS-$(CONFIG_FSL_CADMUS)	+= cadmus.o
 COBJS-$(CONFIG_FSL_VIA)		+= cds_via.o
 COBJS-$(CONFIG_FMAN_ENET)	+= fman.o
@@ -68,6 +77,7 @@ SUBLIB-$(CONFIG_P3041DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P4080DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P5020DS)	+= p_corenet/libp_corenet.o
 SUBLIB-$(CONFIG_P5040DS)	+= p_corenet/libp_corenet.o
+endif
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8821704911..bb81e84113 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -83,6 +83,7 @@ COBJS-$(CONFIG_NAND_DOCG4) += docg4.o
 else  # minimal SPL drivers
 
 COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+COBJS-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
 COBJS-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
 
 endif # drivers
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
new file mode 100644
index 0000000000..8537c4c6f5
--- /dev/null
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -0,0 +1,258 @@
+/*
+ * NAND boot for Freescale Integrated Flash Controller, NAND FCM
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/fsl_ifc.h>
+#include <linux/mtd/nand.h>
+
+static inline int is_blank(uchar *addr, int page_size)
+{
+	int i;
+
+	for (i = 0; i < page_size; i++) {
+		if (__raw_readb(&addr[i]) != 0xff)
+			return 0;
+	}
+
+	/*
+	 * For the SPL, don't worry about uncorrectable errors
+	 * where the main area is all FFs but shouldn't be.
+	 */
+	return 1;
+}
+
+/* returns nonzero if entire page is blank */
+static inline int check_read_ecc(uchar *buf, u32 *eccstat,
+				 unsigned int bufnum, int page_size)
+{
+	u32 reg = eccstat[bufnum / 4];
+	int errors = (reg >> ((3 - bufnum % 4) * 8)) & 0xf;
+
+	if (errors == 0xf) { /* uncorrectable */
+		/* Blank pages fail hw ECC checks */
+		if (is_blank(buf, page_size))
+			return 1;
+
+		puts("ecc error\n");
+		for (;;)
+			;
+	}
+
+	return 0;
+}
+
+static inline void nand_wait(uchar *buf, int bufnum, int page_size)
+{
+	struct fsl_ifc *ifc = IFC_BASE_ADDR;
+	u32 status;
+	u32 eccstat[4];
+	int bufperpage = page_size / 512;
+	int bufnum_end, i;
+
+	bufnum *= bufperpage;
+	bufnum_end = bufnum + bufperpage - 1;
+
+	do {
+		status = in_be32(&ifc->ifc_nand.nand_evter_stat);
+	} while (!(status & IFC_NAND_EVTER_STAT_OPC));
+
+	if (status & IFC_NAND_EVTER_STAT_FTOER) {
+		puts("flash time out error\n");
+		for (;;)
+			;
+	}
+
+	for (i = bufnum / 4; i <= bufnum_end / 4; i++)
+		eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
+
+	for (i = bufnum; i <= bufnum_end; i++) {
+		if (check_read_ecc(buf, eccstat, i, page_size))
+			break;
+	}
+
+	out_be32(&ifc->ifc_nand.nand_evter_stat, status);
+}
+
+static inline int bad_block(uchar *marker, int port_size)
+{
+	if (port_size == 8)
+		return __raw_readb(marker) != 0xff;
+	else
+		return __raw_readw((u16 *)marker) != 0xffff;
+}
+
+static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
+{
+	struct fsl_ifc *ifc = IFC_BASE_ADDR;
+	uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
+	int page_size;
+	int port_size;
+	int pages_per_blk;
+	int blk_size;
+	int bad_marker = 0;
+	int bufnum_mask, bufnum;
+
+	int csor, cspr;
+	int pos = 0;
+	int j = 0;
+
+	int sram_addr;
+	int pg_no;
+
+	/* Get NAND Flash configuration */
+	csor = CONFIG_SYS_NAND_CSOR;
+	cspr = CONFIG_SYS_NAND_CSPR;
+
+	port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
+
+	if (csor & CSOR_NAND_PGS_4K) {
+		page_size = 4096;
+		bufnum_mask = 0x1;
+	} else if (csor & CSOR_NAND_PGS_2K) {
+		page_size = 2048;
+		bufnum_mask = 0x3;
+	} else {
+		page_size = 512;
+		bufnum_mask = 0xf;
+
+		if (port_size == 8)
+			bad_marker = 5;
+	}
+
+	pages_per_blk =
+		32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);
+
+	blk_size = pages_per_blk * page_size;
+
+	/* Open Full SRAM mapping for spare are access */
+	out_be32(&ifc->ifc_nand.ncfgr, 0x0);
+
+	/* Clear Boot events */
+	out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
+
+	/* Program FIR/FCR for Large/Small page */
+	if (page_size > 512) {
+		out_be32(&ifc->ifc_nand.nand_fir0,
+			 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			 (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+			 (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+			 (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
+		out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+			 (NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+			 (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
+	} else {
+		out_be32(&ifc->ifc_nand.nand_fir0,
+			 (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+			 (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+			 (IFC_FIR_OP_RA0  << IFC_NAND_FIR0_OP2_SHIFT) |
+			 (IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
+		out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
+
+		out_be32(&ifc->ifc_nand.nand_fcr0,
+			 NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
+	}
+
+	/* Program FBCR = 0 for full page read */
+	out_be32(&ifc->ifc_nand.nand_fbcr, 0);
+
+	/* Read and copy u-boot on SDRAM from NAND device, In parallel
+	 * check for Bad block if found skip it and read continue to
+	 * next Block
+	 */
+	while (pos < uboot_size) {
+		int i = 0;
+		do {
+			pg_no = offs / page_size;
+			bufnum = pg_no & bufnum_mask;
+			sram_addr = bufnum * page_size * 2;
+
+			out_be32(&ifc->ifc_nand.row0, pg_no);
+			out_be32(&ifc->ifc_nand.col0, 0);
+			/* start read */
+			out_be32(&ifc->ifc_nand.nandseq_strt,
+				 IFC_NAND_SEQ_STRT_FIR_STRT);
+
+			/* wait for read to complete */
+			nand_wait(&buf[sram_addr], bufnum, page_size);
+
+			/*
+			 * If either of the first two pages are marked bad,
+			 * continue to the next block.
+			 */
+			if (i++ < 2 &&
+			    bad_block(&buf[sram_addr + page_size + bad_marker],
+				      port_size)) {
+				puts("skipping\n");
+				offs = (offs + blk_size) & ~(blk_size - 1);
+				pos &= ~(blk_size - 1);
+				break;
+			}
+
+			for (j = 0; j < page_size; j++)
+				dst[pos + j] = __raw_readb(&buf[sram_addr + j]);
+
+			pos += page_size;
+			offs += page_size;
+		} while ((offs & (blk_size - 1)) && (pos < uboot_size));
+	}
+}
+
+/*
+ * Main entrypoint for NAND Boot. It's necessary that SDRAM is already
+ * configured and available since this code loads the main U-boot image
+ * from NAND into SDRAM and starts from there.
+ */
+void nand_boot(void)
+{
+	__attribute__((noreturn)) void (*uboot)(void);
+	/*
+	 * Load U-Boot image from NAND into RAM
+	 */
+	nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
+		  (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+
+#ifdef CONFIG_NAND_ENV_DST
+	nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+		  (uchar *)CONFIG_NAND_ENV_DST);
+
+#ifdef CONFIG_ENV_OFFSET_REDUND
+	nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+		  (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+#endif
+#endif
+	/*
+	 * Jump to U-Boot image
+	 */
+#ifdef CONFIG_SPL_FLUSH_IMAGE
+	/*
+	 * Clean d-cache and invalidate i-cache, to
+	 * make sure that no stale data is executed.
+	 */
+	flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
+#endif
+	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+	uboot();
+}