* Modify KUP4X board configuration to use SL811 driver for USB memoryLABEL_2004_04_23_2240

  sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X

20 files changed, 954 insertions, 187 deletions

diff --git a/CHANGELOG b/CHANGELOG
index f4112df9009..2e01d696065 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,20 @@
 Changes for U-Boot 1.1.1:
 ======================================================================
 
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+  sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+  Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+  cleanup support for CF/IDE on PCMCIA for PXA25X
+
 * Temporarily disabled John Kerl's extended MII command code because
   "miivals.h" is missing
 
diff --git a/README b/README
index df2c29531e6..d441442d63a 100644
--- a/README
+++ b/README
@@ -1751,6 +1751,17 @@ to save the current settings.
 	  The length in bytes of the EEPROM memory array address.  Note
 	  that this is NOT the chip address length!
 
+	- CFG_I2C_EEPROM_ADDR_OVERFLOW:
+	  EEPROM chips that implement "address overflow" are ones
+	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	  address and the extra bits end up in the "chip address" bit
+	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
+	  byte chips.
+
+	  Note that we consider the length of the address field to
+	  still be one byte because the extra address bits are hidden
+	  in the chip address.
+
 	- CFG_EEPROM_SIZE:
 	  The size in bytes of the EEPROM device.
 
@@ -1972,6 +1983,16 @@ Low Level (hardware related) configuration options:
 		Note that this is a global option, we can't
 		have one FEC in standard MII mode and another in RMII mode.
 
+- CONFIG_CRC32_VERIFY
+		Add a verify option to the crc32 command.
+		The syntax is:
+
+		=> crc32 -v <address> <count> <crc32>
+
+		Where address/count indicate a memory area
+		and crc32 is the correct crc32 which the
+		area should have.
+
 Building the Software:
 ======================
 
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 5a206c0f485..15def0c61aa 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -42,7 +42,7 @@ static void sdram_start (int hi_addr)
 	/* unlock mode register */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
 	__asm__ volatile ("sync");
-	
+
 	/* precharge all banks */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");
@@ -68,7 +68,7 @@ static void sdram_start (int hi_addr)
 	/* set mode register */
 	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
 	__asm__ volatile ("sync");
-	
+
 	/* normal operation */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 	__asm__ volatile ("sync");
@@ -88,7 +88,7 @@ long int initdram (int board_type)
 	ulong dramsize2 = 0;
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
-	
+
 	/* setup SDRAM chip selects */
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
@@ -121,7 +121,7 @@ long int initdram (int board_type)
 	if (dramsize < (1 << 20)) {
 		dramsize = 0;
 	}
-	
+
 	/* set SDRAM CS0 size according to the amount of RAM found */
 	if (dramsize > 0) {
 		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
@@ -129,7 +129,6 @@ long int initdram (int board_type)
 		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
 	}
 
-	
 	/* let SDRAM CS1 start right after CS0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
 
@@ -144,12 +143,12 @@ long int initdram (int board_type)
 	} else {
 		dramsize2 = test2;
 	}
-	
+
 	/* memory smaller than 1MB is impossible */
 	if (dramsize2 < (1 << 20)) {
 		dramsize2 = 0;
 	}
-	
+
 	/* set SDRAM CS1 size according to the amount of RAM found */
 	if (dramsize2 > 0) {
 		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
@@ -188,7 +187,7 @@ long int initdram (int board_type)
 	ulong dramsize = 0;
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
-	
+
 	/* setup and enable SDRAM chip selects */
 	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
 	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
@@ -217,7 +216,7 @@ long int initdram (int board_type)
 
 	/* set SDRAM end address according to size */
 	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-	
+
 #else /* CFG_RAMBOOT */
 
 	/* Retrieve amount of SDRAM available */
diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile
index 3fed0f0485b..573204491eb 100644
--- a/board/kup/kup4x/Makefile
+++ b/board/kup/kup4x/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o usb.o
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/kup/kup4x/usb.c b/board/kup/kup4x/usb.c
deleted file mode 100644
index 5444008ecd1..00000000000
--- a/board/kup/kup4x/usb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * (C) Copyright 2004
- * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include "../common/kup.h"
-
-
-#define  SL811_ADR (0x50000000)
-#define  SL811_DAT (0x50000001)
-
-
-static void sl811_write_index_data (__u8 index, __u8 data)
-{
-	*(volatile unsigned char *) (SL811_ADR) = index;
-	__asm__ ("eieio");
-	*(volatile unsigned char *) (SL811_DAT) = data;
-	__asm__ ("eieio");
-}
-
-static __u8 sl811_read_index_data (__u8 index)
-{
-	__u8 data;
-
-	*(volatile unsigned char *) (SL811_ADR) = index;
-	__asm__ ("eieio");
-	data = *(volatile unsigned char *) (SL811_DAT);
-	__asm__ ("eieio");
-	return (data);
-}
-
-int usb_init_kup4x (void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	int i;
-	unsigned char tmp;
-
-	memctl = &immap->im_memctl;
-	memctl->memc_or7 = 0xFFFF8726;
-	memctl->memc_br7 = 0x50000401;	/* start at 0x50000000 */
-	/* BP 14 low = USB ON */
-	immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
-	/* PB 14 nomal port */
-	immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
-	/* output */
-	immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
-
-	puts ("USB:   ");
-
-	for (i = 0x10; i < 0xff; i++) {
-		sl811_write_index_data (i, i);
-		tmp = (sl811_read_index_data (i));
-		if (tmp != i) {
-			printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
-			return (-1);
-		}
-	}
-	printf ("SL811 ready\n");
-	return (0);
-}
diff --git a/board/netphone/netphone.c b/board/netphone/netphone.c
index 91943c97dea..698115a3191 100644
--- a/board/netphone/netphone.c
+++ b/board/netphone/netphone.c
@@ -30,6 +30,7 @@
 #include <common.h>
 #include <miiphy.h>
 #include <sed156x.h>
+#include <status_led.h>
 
 #include "mpc8xx.h"
 
@@ -659,6 +660,7 @@ int overwrite_console(void)
 
 extern int drv_phone_init(void);
 extern int drv_phone_use_me(void);
+extern int drv_phone_is_idle(void);
 
 int misc_init_r(void)
 {
@@ -691,6 +693,12 @@ int last_stage_init(void)
 		do_poll();
 
 		if (drv_phone_use_me()) {
+			status_led_set(0, STATUS_LED_ON);
+			while (!drv_phone_is_idle()) {
+				do_poll();
+				udelay(1000000 / CFG_HZ);
+			}
+
 			console_assign(stdin, "phone");
 			console_assign(stdout, "phone");
 			console_assign(stderr, "phone");
diff --git a/board/netphone/phone_console.c b/board/netphone/phone_console.c
index a0485b09270..c6a59af0c39 100644
--- a/board/netphone/phone_console.c
+++ b/board/netphone/phone_console.c
@@ -179,7 +179,6 @@ static int last_input_mode;
 static int refresh_time;
 static int blink_time;
 static char last_fast_punct;
-static int last_tab_indicator = -1;
 
 /*************************************************************************************************/
 
@@ -239,8 +238,6 @@ static void console_init(void)
 	refresh_time = REFRESH_HZ;
 	blink_time = BLINK_HZ;
 
-	tab_indicator = 1;
-
 	memset(vty_buf, ' ', sizeof(vty_buf));
 
 	memset(last_visible_buf, ' ', sizeof(last_visible_buf));
@@ -253,6 +250,8 @@ static void console_init(void)
 	sed156x_init();
 	width = sed156x_text_width;
 	height = sed156x_text_height - 1;
+
+	tab_indicator = 0;
 }
 
 /*****************************************************************************/
@@ -718,8 +717,10 @@ static void update(void)
 	if (input_mode != last_input_mode)
 		sed156x_output_at(sed156x_text_width - 3, sed156x_text_height - 1, input_mode_txt[input_mode], 3);
 
-	if (tab_indicator != last_tab_indicator)
+	if (tab_indicator == 0) {
 		sed156x_output_at(0, sed156x_text_height - 1, "\\t", 2);
+		tab_indicator = 1;
+	}
 
 	if (fast_punct != last_fast_punct)
 		sed156x_output_at(4, sed156x_text_height - 1, &fast_punct, 1);
@@ -779,7 +780,6 @@ static void update(void)
 
 	last_input_mode = input_mode;
 	last_fast_punct = fast_punct;
-	last_tab_indicator = tab_indicator;
 }
 
 /* ensure visibility; the trick is to minimize the screen movement */
@@ -891,7 +891,8 @@ void phone_putc(const char c)
 	blink_time = BLINK_HZ;
 
 	switch (c) {
-		case 13:		/* ignore */
+		case '\a':		/* ignore bell            */
+		case '\r':		/* ignore carriage return */
 			break;
 
 		case '\n':		/* next line */
@@ -1141,3 +1142,10 @@ static void kp_do_poll(void)
 			break;
 	}
 }
+
+/**************************************************************************************/
+
+int drv_phone_is_idle(void)
+{
+	return kp_state == SCAN;
+}
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 50ada33e869..0c9927be744 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -60,6 +60,11 @@ static unsigned long mips_io_port_base = 0;
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
+#ifdef __PPC__
+# define EIEIO		__asm__ volatile ("eieio")
+#else
+# define EIEIO		/* nothing */
+#endif
 
 #undef	IDE_DEBUG
 
@@ -790,9 +795,7 @@ ide_outb(int dev, int port, unsigned char val)
 		dev, port, val, (ATA_CURR_BASE(dev)+port));
 
 	/* Ensure I/O operations complete */
-#ifdef __PPC__
-	__asm__ volatile("eieio");
-#endif
+	EIEIO;
 	*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
 }
 #else	/* ! __PPC__ */
@@ -810,9 +813,7 @@ ide_inb(int dev, int port)
 {
 	uchar val;
 	/* Ensure I/O operations complete */
-#ifdef __PPC__
-	__asm__ volatile("eieio");
-#endif
+	EIEIO;
 	val = *((uchar *)(ATA_CURR_BASE(dev)+port));
 	PRINTF ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
 		dev, port, (ATA_CURR_BASE(dev)+port), val);
@@ -837,9 +838,9 @@ output_data_short(int dev, ulong *sect_buf, int words)
 	pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
 	dbuf = (ushort *)sect_buf;
 	while (words--) {
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf = *dbuf++;
-		__asm__ volatile ("eieio");
+		EIEIO;
 	}
 
 	if (words&1)
@@ -895,13 +896,9 @@ output_data(int dev, ulong *sect_buf, int words)
 	pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
 	dbuf = (ushort *)sect_buf;
 	while (words--) {
-#ifdef __PPC__
-		__asm__ volatile ("eieio");
-#endif
+		EIEIO;
 		*pbuf = *dbuf++;
-#ifdef __PPC__
-		__asm__ volatile ("eieio");
-#endif
+		EIEIO;
 		*pbuf = *dbuf++;
 	}
 #else	/* CONFIG_HMI10 */
@@ -913,13 +910,13 @@ output_data(int dev, ulong *sect_buf, int words)
 	pbuf_odd  = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
 	dbuf = (uchar *)sect_buf;
 	while (words--) {
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf_even = *dbuf++;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf_odd = *dbuf++;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf_even = *dbuf++;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf_odd = *dbuf++;
 	}
 #endif	/* CONFIG_HMI10 */
@@ -946,13 +943,9 @@ input_data(int dev, ulong *sect_buf, int words)
 	PRINTF("in input data base for read is %lx\n", (unsigned long) pbuf);
 
 	while (words--) {
-#ifdef __PPC__
-		__asm__ volatile ("eieio");
-#endif
+		EIEIO;
 		*dbuf++ = *pbuf;
-#ifdef __PPC__
-		__asm__ volatile ("eieio");
-#endif
+		EIEIO;
 		*dbuf++ = *pbuf;
 	}
 #else	/* CONFIG_HMI10 */
@@ -964,13 +957,13 @@ input_data(int dev, ulong *sect_buf, int words)
 	pbuf_odd  = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
 	dbuf = (uchar *)sect_buf;
 	while (words--) {
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf_even;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf_odd;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf_even;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf_odd;
 	}
 #endif	/* CONFIG_HMI10 */
@@ -994,9 +987,9 @@ input_data_short(int dev, ulong *sect_buf, int words)
 	pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
 	dbuf = (ushort *)sect_buf;
 	while (words--) {
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf;
-		__asm__ volatile ("eieio");
+		EIEIO;
 	}
 
 	if (words&1) {
@@ -1608,9 +1601,7 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
 	PRINTF("in output data shorts base for read is %lx\n", (unsigned long) pbuf);
 
 	while (shorts--) {
-#ifdef __PPC__
-		__asm__ volatile ("eieio");
-#endif
+		EIEIO;
 		*pbuf = *dbuf++;
 	}
 #else	/* CONFIG_HMI10 */
@@ -1621,9 +1612,9 @@ output_data_shorts(int dev, ushort *sect_buf, int shorts)
 	pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
 	pbuf_odd  = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
 	while (shorts--) {
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf_even = *dbuf++;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*pbuf_odd = *dbuf++;
 	}
 #endif	/* CONFIG_HMI10 */
@@ -1642,9 +1633,7 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
 	PRINTF("in input data shorts base for read is %lx\n", (unsigned long) pbuf);
 
 	while (shorts--) {
-#ifdef __PPC__
-		__asm__ volatile ("eieio");
-#endif
+		EIEIO;
 		*dbuf++ = *pbuf;
 	}
 #else	/* CONFIG_HMI10 */
@@ -1655,9 +1644,9 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
 	pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
 	pbuf_odd  = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
 	while (shorts--) {
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf_even;
-		__asm__ volatile ("eieio");
+		EIEIO;
 		*dbuf++ = *pbuf_odd;
 	}
 #endif	/* CONFIG_HMI10 */
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 4539dc54cad..8ec05c80fa5 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -413,7 +413,7 @@ static void extract_range(
 	}
 }
 
-// ----------------------------------------------------------------
+/* ---------------------------------------------------------------- */
 int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	char		op;
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 150b106b602..83004b53ac9 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -598,14 +598,14 @@ U_BOOT_CMD(
 	usb,	5,	1,	do_usb,
 	"usb     - USB sub-system\n",
 	"reset - reset (rescan) USB controller\n"
-	"usb  stop [f]  - stop USB [f]=force stop\n"
-	"usb  tree  - show USB device tree\n"
-	"usb  info [dev] - show available USB devices\n"
-	"usb  scan  - (re-)scan USB bus for storage devices\n"
-	"usb  device [dev] - show or set current USB storage device\n"
-	"usb  part [dev] - print partition table of one or all USB storage devices\n"
-	"usb  read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
-	"     to memory address `addr'\n"
+	"usb stop [f]  - stop USB [f]=force stop\n"
+	"usb tree  - show USB device tree\n"
+	"usb info [dev] - show available USB devices\n"
+	"usb scan  - (re-)scan USB bus for storage devices\n"
+	"usb device [dev] - show or set current USB storage device\n"
+	"usb part [dev] - print partition table of one or all USB storage devices\n"
+	"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
+	"    to memory address `addr'\n"
 );
 
 
diff --git a/common/main.c b/common/main.c
index 7ce9b75f907..0869426f17d 100644
--- a/common/main.c
+++ b/common/main.c
@@ -726,8 +726,8 @@ static void process_macros (const char *input, char *output)
 	int inputcnt  = strlen (input);
 	int outputcnt = CFG_CBSIZE;
 	int state = 0;	/* 0 = waiting for '$'	*/
-			/* 1 = waiting for '('	*/
-			/* 2 = waiting for ')'	*/
+			/* 1 = waiting for '(' or '{' */
+			/* 2 = waiting for ')' or '}' */
 			/* 3 = waiting for '''  */
 #ifdef DEBUG_PARSER
 	char *output_start = output;
@@ -765,7 +765,7 @@ static void process_macros (const char *input, char *output)
 		}
 		break;
 	    case 1:			/* Waiting for (	*/
-		if (c == '(') {
+		if (c == '(' || c == '{') {
 			state++;
 			varname_start = input;
 		} else {
@@ -780,7 +780,7 @@ static void process_macros (const char *input, char *output)
 		}
 		break;
 	    case 2:			/* Waiting for )	*/
-		if (c == ')') {
+		if (c == ')' || c == '}') {
 			int i;
 			char envname[CFG_CBSIZE], *envval;
 			int envcnt = input-varname_start-1; /* Varname # of chars */
diff --git a/drivers/Makefile b/drivers/Makefile
index ee2d8b9cd55..0d1860e6e1f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -40,7 +40,7 @@ OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  rtl8019.o rtl8139.o rtl8169.o \
 	  s3c24x0_i2c.o sed13806.o sed156x.o \
 	  serial.o serial_max3100.o serial_pl010.o serial_pl011.o \
-	  serial_xuartlite.o \
+	  serial_xuartlite.o sl811_usb.o \
 	  smc91111.o smiLynxEM.o status_led.o sym53c8xx.o \
 	  ti_pci1410a.o tigon3.o w83c553f.o omap1510_i2c.o \
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
diff --git a/drivers/sl811.h b/drivers/sl811.h
new file mode 100644
index 00000000000..c1f9f013bd1
--- /dev/null
+++ b/drivers/sl811.h
@@ -0,0 +1,104 @@
+#ifndef __UBOOT_SL811_H
+#define __UBOOT_SL811_H
+
+#undef SL811_DEBUG
+
+#ifdef SL811_DEBUG
+	#define PDEBUG(level, fmt, args...) \
+		if (debug >= (level)) printf("[%s:%d] " fmt, \
+		__PRETTY_FUNCTION__, __LINE__ , ## args)
+#else
+	#define PDEBUG(level, fmt, args...) do {} while(0)
+#endif
+
+/* Sl811 host control register */
+#define	SL811_CTRL_A		0x00
+#define	SL811_ADDR_A		0x01
+#define	SL811_LEN_A		0x02
+#define	SL811_STS_A		0x03	/* read	*/
+#define	SL811_PIDEP_A		0x03	/* write */
+#define	SL811_CNT_A		0x04	/* read	*/
+#define	SL811_DEV_A		0x04	/* write */
+#define	SL811_CTRL1		0x05
+#define	SL811_INTR		0x06
+#define	SL811_CTRL_B		0x08
+#define	SL811_ADDR_B		0x09
+#define	SL811_LEN_B		0x0A
+#define	SL811_STS_B		0x0B	/* read	*/
+#define	SL811_PIDEP_B		0x0B	/* write */
+#define	SL811_CNT_B		0x0C	/* read	*/
+#define	SL811_DEV_B		0x0C	/* write */
+#define	SL811_INTRSTS		0x0D	/* write clears	bitwise	*/
+#define	SL811_HWREV		0x0E	/* read	*/
+#define	SL811_SOFLOW		0x0E	/* write */
+#define	SL811_SOFCNTDIV		0x0F	/* read	*/
+#define	SL811_CTRL2		0x0F	/* write */
+
+/* USB control register bits (addr 0x00 and addr 0x08) */
+#define	SL811_USB_CTRL_ARM	0x01
+#define	SL811_USB_CTRL_ENABLE	0x02
+#define	SL811_USB_CTRL_DIR_OUT	0x04
+#define	SL811_USB_CTRL_ISO	0x10
+#define	SL811_USB_CTRL_SOF	0x20
+#define	SL811_USB_CTRL_TOGGLE_1	0x40
+#define	SL811_USB_CTRL_PREAMBLE	0x80
+
+/* USB status register bits (addr 0x03 and addr 0x0B) */
+#define	SL811_USB_STS_ACK	0x01
+#define	SL811_USB_STS_ERROR	0x02
+#define	SL811_USB_STS_TIMEOUT	0x04
+#define	SL811_USB_STS_TOGGLE_1	0x08
+#define	SL811_USB_STS_SETUP	0x10
+#define	SL811_USB_STS_OVERFLOW	0x20
+#define	SL811_USB_STS_NAK	0x40
+#define	SL811_USB_STS_STALL	0x80
+
+/* Control register 1 bits (addr 0x05) */
+#define	SL811_CTRL1_SOF		0x01
+#define	SL811_CTRL1_RESET	0x08
+#define	SL811_CTRL1_JKSTATE	0x10
+#define	SL811_CTRL1_SPEED_LOW	0x20
+#define	SL811_CTRL1_SUSPEND	0x40
+
+/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */
+#define	SL811_INTR_DONE_A	0x01
+#define	SL811_INTR_DONE_B	0x02
+#define	SL811_INTR_SOF		0x10
+#define	SL811_INTR_INSRMV	0x20
+#define	SL811_INTR_DETECT	0x40
+#define	SL811_INTR_NOTPRESENT	0x40
+#define	SL811_INTR_SPEED_FULL	0x80    /* only in status reg */
+
+/* HW rev and SOF lo register bits (addr 0x0E) */
+#define	SL811_HWR_HWREV		0xF0
+
+/* SOF counter and control reg 2 (addr 0x0F) */
+#define	SL811_CTL2_SOFHI	0x3F
+#define	SL811_CTL2_DSWAP	0x40
+#define	SL811_CTL2_HOST		0x80
+
+/* Set up for 1-ms SOF time. */
+#define SL811_12M_LOW		0xE0
+#define SL811_12M_HI		0x2E
+
+#define SL811_DATA_START	0x10
+#define SL811_DATA_LIMIT	240
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS           0x0080
+#define RH_CLEAR_FEATURE        0x0100
+#define RH_SET_FEATURE          0x0300
+#define RH_SET_ADDRESS		0x0500
+#define RH_GET_DESCRIPTOR	0x0680
+#define RH_SET_DESCRIPTOR       0x0700
+#define RH_GET_CONFIGURATION	0x0880
+#define RH_SET_CONFIGURATION	0x0900
+#define RH_GET_STATE            0x0280
+#define RH_GET_INTERFACE        0x0A80
+#define RH_SET_INTERFACE        0x0B00
+#define RH_SYNC_FRAME           0x0C80
+
+
+#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep))
+
+#endif	/* __UBOOT_SL811_H */
diff --git a/drivers/sl811_usb.c b/drivers/sl811_usb.c
new file mode 100644
index 00000000000..a18e54d775c
--- /dev/null
+++ b/drivers/sl811_usb.c
@@ -0,0 +1,705 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This code is based on linux driver for sl811hs chip, source at
+ * drivers/usb/host/sl811.c:
+ *
+ * SL811 Host Controller Interface driver for USB.
+ *
+ * Copyright (c) 2003/06, Courage Co., Ltd.
+ *
+ * Based on:
+ *	1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
+ *	  Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
+ *	  Adam Richter, Gregory P. Smith;
+ *	2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
+ *	3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#ifdef CONFIG_USB_SL811HS
+#include <mpc8xx.h>
+#include <usb.h>
+#include "sl811.h"
+
+#include "../board/kup/common/kup.h"
+
+#ifdef __PPC__
+# define EIEIO		__asm__ volatile ("eieio")
+#else
+# define EIEIO		/* nothing */
+#endif
+
+#define	 SL811_ADR (0x50000000)
+#define	 SL811_DAT (0x50000001)
+
+#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
+
+#ifdef SL811_DEBUG
+static int debug = 9;
+#endif
+
+static int root_hub_devnum = 0;
+static struct usb_port_status rh_status = { 0 };/* root hub port status */
+
+static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
+			       void *data, int buf_len, struct devrequest *cmd);
+
+static void sl811_write (__u8 index, __u8 data)
+{
+	*(volatile unsigned char *) (SL811_ADR) = index;
+	EIEIO;
+	*(volatile unsigned char *) (SL811_DAT) = data;
+	EIEIO;
+}
+
+static __u8 sl811_read (__u8 index)
+{
+	__u8 data;
+
+	*(volatile unsigned char *) (SL811_ADR) = index;
+	EIEIO;
+	data = *(volatile unsigned char *) (SL811_DAT);
+	EIEIO;
+	return (data);
+}
+
+/*
+ * Read consecutive bytes of data from the SL811H/SL11H buffer
+ */
+static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
+{
+	*(volatile unsigned char *) (SL811_ADR) = offset;
+	EIEIO;
+	while (size--) {
+		*buf++ = *(volatile unsigned char *) (SL811_DAT);
+		EIEIO;
+	}
+}
+
+/*
+ * Write consecutive bytes of data to the SL811H/SL11H buffer
+ */
+static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
+{
+	*(volatile unsigned char *) (SL811_ADR) = offset;
+	EIEIO;
+	while (size--) {
+		*(volatile unsigned char *) (SL811_DAT) = *buf++;
+		EIEIO;
+	}
+}
+
+int usb_init_kup4x (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	int i;
+	unsigned char tmp;
+
+	memctl = &immap->im_memctl;
+	memctl->memc_or7 = 0xFFFF8726;
+	memctl->memc_br7 = 0x50000401;	/* start at 0x50000000 */
+	/* BP 14 low = USB ON */
+	immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
+	/* PB 14 nomal port */
+	immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
+	/* output */
+	immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
+
+	puts ("USB:   ");
+
+	for (i = 0x10; i < 0xff; i++) {
+		sl811_write(i, i);
+		tmp = (sl811_read(i));
+		if (tmp != i) {
+			printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
+			return (-1);
+		}
+	}
+	printf ("SL811 ready\n");
+	return (0);
+}
+
+/*
+ * This function resets SL811HS controller and detects the speed of
+ * the connecting device
+ *
+ * Return: 0 = no device attached; 1 = USB device attached
+ */
+static int sl811_hc_reset(void)
+{
+	int status ;
+
+	sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
+	sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+
+	mdelay(20);
+
+	/* Disable hardware SOF generation, clear all irq status. */
+	sl811_write(SL811_CTRL1, 0);
+	mdelay(2);
+	sl811_write(SL811_INTRSTS, 0xff);
+	status = sl811_read(SL811_INTRSTS);
+
+	if (status & SL811_INTR_NOTPRESENT) {
+		/* Device is not present */
+		PDEBUG(0, "Device not present\n");
+		rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
+		rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+		sl811_write(SL811_INTR, SL811_INTR_INSRMV);
+		return 0;
+	}
+
+	/* Send SOF to address 0, endpoint 0. */
+	sl811_write(SL811_LEN_B, 0);
+	sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
+	sl811_write(SL811_DEV_B, 0x00);
+	sl811_write(SL811_SOFLOW, SL811_12M_LOW);
+
+	if (status & SL811_INTR_SPEED_FULL) {
+		/* full speed device connect directly to root hub */
+		PDEBUG (0, "Full speed Device attached\n");
+
+		sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+		mdelay(20);
+		sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
+		sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
+
+		/* start the SOF or EOP */
+		sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
+		rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
+		rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
+		mdelay(2);
+		sl811_write(SL811_INTRSTS, 0xff);
+	} else {
+		/* slow speed device connect directly to root-hub */
+		PDEBUG(0, "Low speed Device attached\n");
+
+		sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
+		mdelay(20);
+		sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
+		sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
+
+		/* start the SOF or EOP */
+		sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
+		rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
+		mdelay(2);
+		sl811_write(SL811_INTRSTS, 0xff);
+	}
+
+	rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+	sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
+
+	return 1;
+}
+
+int usb_lowlevel_init(void)
+{
+	root_hub_devnum = 0;
+	sl811_hc_reset();
+	return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+	sl811_hc_reset();
+	return 0;
+}
+
+int sl811_send_packet(int dir_to_host, int data1, __u8 *buffer, int len)
+{
+	__u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
+	__u16 status;
+	int err = 0;
+
+	if (len > 239)
+		return -1;
+
+	if (!dir_to_host)
+		ctrl |= SL811_USB_CTRL_DIR_OUT;
+	if (data1)
+		ctrl |= SL811_USB_CTRL_TOGGLE_1;
+
+	sl811_write(SL811_ADDR_A, 0x10);
+	sl811_write(SL811_LEN_A, len);
+	if (!dir_to_host && len)
+		sl811_write_buf(0x10, buffer, len);
+
+	while (err < 3) {
+		if (sl811_read(SL811_SOFCNTDIV)*64 < len * 8 * 2)
+			ctrl |= SL811_USB_CTRL_SOF;
+		else
+			ctrl &= ~SL811_USB_CTRL_SOF;
+		sl811_write(SL811_CTRL_A, ctrl);
+		while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A))
+			; /* do nothing */
+
+		sl811_write(SL811_INTRSTS, 0xff);
+		status = sl811_read(SL811_STS_A);
+
+		if (status & SL811_USB_STS_ACK) {
+			int remainder = sl811_read(SL811_CNT_A);
+			if (remainder) {
+				PDEBUG(0, "usb transfer remainder = %d\n", remainder);
+				len -= remainder;
+			}
+			if (dir_to_host && len)
+				sl811_read_buf(0x10, buffer, len);
+			return len;
+		}
+
+		if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
+			continue;
+
+		PDEBUG(0, "usb transfer error %#x\n", (int)status);
+		err++;
+	}
+
+	return -1;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		    int len)
+{
+	int dir_out = usb_pipeout(pipe);
+	int ep = usb_pipeendpoint(pipe);
+	__u8* buf = (__u8*)buffer;
+	int max = usb_maxpacket(dev, pipe);
+	int done = 0;
+
+	PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
+	       usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
+
+	dev->status = 0;
+
+	sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
+	sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
+	while (done < len) {
+		int res = sl811_send_packet(!dir_out, usb_gettoggle(dev, ep, dir_out),
+					    buf+done,
+					    max > len - done ? len - done : max);
+		if (res < 0) {
+			dev->status = res;
+			return res;
+		}
+
+		if (!dir_out && res < max) /* short packet */
+			break;
+
+		done += res;
+		usb_dotoggle(dev, ep, dir_out);
+	}
+
+	dev->act_len = done;
+
+	return 0;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		       int len,struct devrequest *setup)
+{
+	int done = 0;
+	int devnum = usb_pipedevice(pipe);
+
+	dev->status = 0;
+
+	if (devnum == root_hub_devnum)
+		return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
+
+	PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x\n",
+	       devnum, usb_pipeendpoint(pipe), buffer, len, (int)setup->requesttype,
+	       (int)setup->request);
+
+	sl811_write(SL811_DEV_A, devnum);
+	sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, 0));
+	/* setup phase */
+	if (sl811_send_packet(0, 0, (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
+		int dir_in = setup->requesttype & USB_DIR_IN;
+		__u8* buf = (__u8*)buffer;
+		int data1 = 1;
+		int max = usb_maxpacket(dev, pipe);
+
+		/* data phase */
+		sl811_write(SL811_PIDEP_A,
+			    PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, 0));
+		while (done < len) {
+			int res = sl811_send_packet(dir_in, data1, buf+done,
+						    max > len - done ? len - done : max);
+			if (res < 0)
+				return res;
+			done += res;
+
+			if (dir_in && res < max) /* short packet */
+				break;
+
+			data1 = !data1;
+		}
+
+		/* status phase */
+		sl811_write(SL811_PIDEP_A,
+			    PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, 0));
+		if (sl811_send_packet(!dir_in, 1, 0, 0) < 0) {
+			PDEBUG(0, "status phase failed!\n");
+			dev->status = -1;
+		}
+	} else {
+		PDEBUG(0, "setup phase failed!\n");
+		dev->status = -1;
+	}
+
+	dev->act_len = done;
+
+	return done;
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		   int len, int interval)
+{
+	PDEBUG(7, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
+	       buffer, len, interval);
+	return -1;
+}
+
+/*
+ * SL811 Virtual Root Hub
+ */
+
+/* Device descriptor */
+static __u8 sl811_rh_dev_des[] =
+{
+	0x12,	    /*	__u8  bLength; */
+	0x01,	    /*	__u8  bDescriptorType; Device */
+	0x10,	    /*	__u16 bcdUSB; v1.1 */
+	0x01,
+	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  bDeviceSubClass; */
+	0x00,	    /*	__u8  bDeviceProtocol; */
+	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
+	0x00,	    /*	__u16 idVendor; */
+	0x00,
+	0x00,	    /*	__u16 idProduct; */
+	0x00,
+	0x00,	    /*	__u16 bcdDevice; */
+	0x00,
+	0x00,	    /*	__u8  iManufacturer; */
+	0x02,	    /*	__u8  iProduct; */
+	0x01,	    /*	__u8  iSerialNumber; */
+	0x01	    /*	__u8  bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 sl811_rh_config_des[] =
+{
+	0x09,	    /*	__u8  bLength; */
+	0x02,	    /*	__u8  bDescriptorType; Configuration */
+	0x19,	    /*	__u16 wTotalLength; */
+	0x00,
+	0x01,	    /*	__u8  bNumInterfaces; */
+	0x01,	    /*	__u8  bConfigurationValue; */
+	0x00,	    /*	__u8  iConfiguration; */
+	0x40,	    /*	__u8  bmAttributes;
+		    Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
+		    4..0: resvd */
+	0x00,	    /*	__u8  MaxPower; */
+
+	/* interface */
+	0x09,	    /*	__u8  if_bLength; */
+	0x04,	    /*	__u8  if_bDescriptorType; Interface */
+	0x00,	    /*	__u8  if_bInterfaceNumber; */
+	0x00,	    /*	__u8  if_bAlternateSetting; */
+	0x01,	    /*	__u8  if_bNumEndpoints; */
+	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  if_bInterfaceSubClass; */
+	0x00,	    /*	__u8  if_bInterfaceProtocol; */
+	0x00,	    /*	__u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,	    /*	__u8  ep_bLength; */
+	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
+	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
+	0x08,	    /*	__u16 ep_wMaxPacketSize; */
+	0x00,
+	0xff	    /*	__u8  ep_bInterval; 255 ms */
+};
+
+/* root hub class descriptor*/
+static __u8 sl811_rh_hub_des[] =
+{
+	0x09,			/*  __u8  bLength; */
+	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
+	0x01,			/*  __u8  bNbrPorts; */
+	0x00,			/* __u16  wHubCharacteristics; */
+	0x00,
+	0x50,			/*  __u8  bPwrOn2pwrGood; 2ms */
+	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
+	0xfc,			/*  __u8  DeviceRemovable; *** 7 Ports max *** */
+	0xff			/*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
+};
+
+/*
+ * helper routine for returning string descriptors in UTF-16LE
+ * input can actually be ISO-8859-1; ASCII is its 7-bit subset
+ */
+static int ascii2utf (char *s, u8 *utf, int utfmax)
+{
+	int retval;
+
+	for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
+		*utf++ = *s++;
+		*utf++ = 0;
+	}
+	return retval;
+}
+
+/*
+ * root_hub_string is used by each host controller's root hub code,
+ * so that they're identified consistently throughout the system.
+ */
+int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
+{
+	char buf [30];
+
+	/* assert (len > (2 * (sizeof (buf) + 1)));
+	   assert (strlen (type) <= 8);*/
+
+	/* language ids */
+	if (id == 0) {
+		*data++ = 4; *data++ = 3;	/* 4 bytes data */
+		*data++ = 0; *data++ = 0;	/* some language id */
+		return 4;
+
+	/* serial number */
+	} else if (id == 1) {
+		sprintf (buf, "%x", serial);
+
+	/* product description */
+	} else if (id == 2) {
+		sprintf (buf, "USB %s Root Hub", type);
+
+	/* id 3 == vendor description */
+
+	/* unsupported IDs --> "stall" */
+	} else
+	    return 0;
+
+	data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
+	data [1] = 3;
+	return data [0];
+}
+
+/* helper macro */
+#define OK(x)	len = (x); break
+
+/*
+ * This function handles all USB request to the the virtual root hub
+ */
+static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
+			       void *data, int buf_len, struct devrequest *cmd)
+{
+	__u8 data_buf[16];
+	__u8 *bufp = data_buf;
+	int len = 0;
+	int status = 0;
+
+	__u16 bmRType_bReq;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+
+	if (usb_pipeint(pipe)) {
+		PDEBUG(0, "interrupt transfer unimplemented!\n");
+		return 0;
+	}
+
+	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
+	wValue	      = le16_to_cpu (cmd->value);
+	wIndex	      = le16_to_cpu (cmd->index);
+	wLength	      = le16_to_cpu (cmd->length);
+
+	PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
+	       bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
+
+	/* Request Destination:
+		   without flags: Device,
+		   USB_RECIP_INTERFACE: interface,
+		   USB_RECIP_ENDPOINT: endpoint,
+		   USB_TYPE_CLASS means HUB here,
+		   USB_RECIP_OTHER | USB_TYPE_CLASS  almost ever means HUB_PORT here
+	*/
+	switch (bmRType_bReq) {
+	case RH_GET_STATUS:
+		*(__u16 *)bufp = cpu_to_le16(1);
+		OK(2);
+
+	case RH_GET_STATUS | USB_RECIP_INTERFACE:
+		*(__u16 *)bufp = cpu_to_le16(0);
+		OK(2);
+
+	case RH_GET_STATUS | USB_RECIP_ENDPOINT:
+		*(__u16 *)bufp = cpu_to_le16(0);
+		OK(2);
+
+	case RH_GET_STATUS | USB_TYPE_CLASS:
+		*(__u32 *)bufp = cpu_to_le32(0);
+		OK(4);
+
+	case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
+		*(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
+		OK(4);
+
+	case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
+		switch (wValue) {
+		case 1:
+			OK(0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+			OK(0);
+
+		case C_HUB_OVER_CURRENT:
+			OK(0);
+		}
+		break;
+
+	case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+			OK(0);
+
+		case USB_PORT_FEAT_SUSPEND:
+			rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
+			OK(0);
+
+		case USB_PORT_FEAT_POWER:
+			rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
+			OK(0);
+
+		case USB_PORT_FEAT_C_CONNECTION:
+			rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
+			OK(0);
+
+		case USB_PORT_FEAT_C_ENABLE:
+			rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
+			OK(0);
+
+		case USB_PORT_FEAT_C_SUSPEND:
+			rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
+			OK(0);
+
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
+			OK(0);
+
+		case USB_PORT_FEAT_C_RESET:
+			rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
+			OK(0);
+		}
+		break;
+
+	case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
+		switch (wValue) {
+		case USB_PORT_FEAT_SUSPEND:
+			rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
+			OK(0);
+
+		case USB_PORT_FEAT_RESET:
+			rh_status.wPortStatus |= USB_PORT_STAT_RESET;
+			rh_status.wPortChange = 0;
+			rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
+			rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
+			rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
+			OK(0);
+
+		case USB_PORT_FEAT_POWER:
+			rh_status.wPortStatus |= USB_PORT_STAT_POWER;
+			OK(0);
+
+		case USB_PORT_FEAT_ENABLE:
+			rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
+			OK(0);
+		}
+		break;
+
+	case RH_SET_ADDRESS:
+		root_hub_devnum = wValue;
+		OK(0);
+
+	case RH_GET_DESCRIPTOR:
+		switch ((wValue & 0xff00) >> 8) {
+		case USB_DT_DEVICE:
+			len = sizeof(sl811_rh_dev_des);
+			bufp = sl811_rh_dev_des;
+			OK(len);
+
+		case USB_DT_CONFIG:
+			len = sizeof(sl811_rh_config_des);
+			bufp = sl811_rh_config_des;
+			OK(len);
+
+		case USB_DT_STRING:
+			len = usb_root_hub_string(wValue & 0xff, (int)(long)0,	"SL811HS", data, wLength);
+			if (len > 0) {
+				bufp = data;
+				OK(len);
+			}
+
+		default:
+			status = -32;
+		}
+		break;
+
+	case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
+		len = sizeof(sl811_rh_hub_des);
+		bufp = sl811_rh_hub_des;
+		OK(len);
+
+	case RH_GET_CONFIGURATION:
+		bufp[0] = 0x01;
+		OK(1);
+
+	case RH_SET_CONFIGURATION:
+		OK(0);
+
+	default:
+		PDEBUG(1, "unsupported root hub command\n");
+		status = -32;
+	}
+
+	len = min(len, buf_len);
+	if (data != bufp)
+		memcpy(data, bufp, len);
+
+	PDEBUG(5, "len = %d, status = %d\n", len, status);
+
+	usb_dev->status = status;
+	usb_dev->act_len = len;
+
+	return status == 0 ? len : status;
+}
+
+#endif	/* CONFIG_USB_SL811HS */
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 4451f2a0e16..a5dcb4e7c75 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -118,7 +118,9 @@
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_I2C	| \
-				CFG_CMD_IDE	)
+				CFG_CMD_IDE	| \
+				CFG_CMD_USB	| \
+				CFG_CMD_FAT)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -386,4 +388,7 @@
 #define CONFIG_AUTOBOOT_STOP_STR	"."	/* easy to stop for now		*/
 #define CONFIG_SILENT_CONSOLE	1
 
+#define CONFIG_USB_STORAGE	1
+#define CONFIG_USB_SL811HS	1
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h
index d82d5a78117..9dadaa836a1 100644
--- a/include/configs/NETPHONE.h
+++ b/include/configs/NETPHONE.h
@@ -67,8 +67,8 @@
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
 	"tftpboot; " 								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " 	\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " 	\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
 	"bootm"
 
 #define CONFIG_AUTOSCRIPT
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index d9a78bdeada..b720ec5be83 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -65,8 +65,8 @@
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
 	"tftpboot; " 								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " 	\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " 	\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h
index 8f93a49c082..dc6b15fcdc4 100644
--- a/include/configs/NETVIA.h
+++ b/include/configs/NETVIA.h
@@ -64,8 +64,8 @@
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
 	"tftpboot; " 								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " 	\
-	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " 	\
+	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " 	\
+	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " 	\
 	"bootm"
 
 #define CONFIG_LOADS_ECHO	0	/* echo off for serial download	*/
diff --git a/include/fat.h b/include/fat.h
index 3e7c91c9b65..0645458f17b 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -27,6 +27,8 @@
 #ifndef _FAT_H_
 #define _FAT_H_
 
+#include <asm/byteorder.h>
+
 #define CONFIG_SUPPORT_VFAT
 
 #define SECTOR_SIZE FS_BLOCK_SIZE
@@ -210,11 +212,4 @@ long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
 const char *file_getfsname(int idx);
 int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
 
-#ifdef CONFIG_PXA250
-#undef FAT2CPU16
-#define FAT2CPU16(x) x
-#undef FAT2CPU32
-#define FAT2CPU32(x) x
-#endif
-
 #endif /* _FAT_H_ */
diff --git a/include/usb.h b/include/usb.h
index 074e0f169ce..6940d325109 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -29,15 +29,15 @@
 #include <usb_defs.h>
 
 /* Everything is aribtrary */
-#define USB_ALTSETTINGALLOC          4
-#define USB_MAXALTSETTING	           128  /* Hard limit */
+#define USB_ALTSETTINGALLOC		4
+#define USB_MAXALTSETTING		128	/* Hard limit */
 
-#define USB_MAX_DEVICE              32
-#define USB_MAXCONFIG		            8
-#define USB_MAXINTERFACES	          8
-#define USB_MAXENDPOINTS	          16
-#define USB_MAXCHILDREN  						8 	/* This is arbitrary */
-#define USB_MAX_HUB									16
+#define USB_MAX_DEVICE			32
+#define USB_MAXCONFIG			8
+#define USB_MAXINTERFACES		8
+#define USB_MAXENDPOINTS		16
+#define USB_MAXCHILDREN			8	/* This is arbitrary */
+#define USB_MAX_HUB			16
 
 #define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
 
@@ -125,19 +125,19 @@ struct usb_config_descriptor {
 	unsigned char  bmAttributes;
 	unsigned char  MaxPower;
 
-	unsigned char  no_of_if;			/* number of interfaces */
+	unsigned char  no_of_if;		/* number of interfaces */
 	struct usb_interface_descriptor if_desc[USB_MAXINTERFACES];
 } __attribute__ ((packed));
 
 
 struct usb_device {
-	int devnum;								/* Device number on USB bus */
-	int slow;									/* Slow device? */
-	char mf[32];		     			/* manufacturer */
-	char prod[32];		     		/* product */
-	char serial[32];       	  /* serial number */
+	int devnum;			/* Device number on USB bus */
+	int slow;			/* Slow device? */
+	char mf[32];			/* manufacturer */
+	char prod[32];			/* product */
+	char serial[32];		/* serial number */
 
-	int maxpacketsize;		    /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
+	int maxpacketsize;		/* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
 	unsigned int toggle[2];		/* one bit for each endpoint ([0] = IN, [1] = OUT) */
 	unsigned int halted[2];		/* endpoint halts; one bit per endpoint # & direction; */
 			    /* [0] = IN, [1] = OUT */
@@ -152,7 +152,7 @@ struct usb_device {
 	int string_langid;		/* language ID for strings */
 	int (*irq_handle)(struct usb_device *dev);
 	unsigned long irq_status;
-	int irq_act_len;			/* transfered bytes */
+	int irq_act_len;		/* transfered bytes */
 	void *privptr;
 	/*
 	 * Child devices -  if this is a hub device
@@ -169,7 +169,7 @@ struct usb_device {
  * this is how the lowlevel part communicate with the outer world
  */
 
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS)
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
@@ -180,7 +180,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 /* Defines */
 #define USB_UHCI_VEND_ID 0x8086
-#define USB_UHCI_DEV_ID  0x7112
+#define USB_UHCI_DEV_ID	 0x7112
 
 #else
 #error USB Lowlevel not defined
@@ -242,8 +242,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 	({ unsigned long x_ = (unsigned long)x; \
 	 (unsigned long)( \
 		((x_ & 0x000000FFUL) << 24) | \
-		((x_ & 0x0000FF00UL) <<  8) | \
-		((x_ & 0x00FF0000UL) >>  8) | \
+		((x_ & 0x0000FF00UL) <<	 8) | \
+		((x_ & 0x00FF0000UL) >>	 8) | \
 		((x_ & 0xFF000000UL) >> 24) ); \
 	})
 #endif /* LITTLEENDIAN */
@@ -298,7 +298,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 
 /* The D0/D1 toggle bits */
 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
-#define	usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << ep))
+#define usb_dotoggle(dev, ep, out)  ((dev)->toggle[out] ^= (1 << ep))
 #define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << ep)) | ((bit) << ep))
 
 /* Endpoint halt control/status */