cfi_flash: Add cmdset-specific init functions

Move things like reading JEDEC IDs and fixing up geometry reversal
into separate functions. The geometry reversal fixup is now performed
by altering the qry structure directly, which makes the sector init
code slightly cleaner.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

1 files changed, 111 insertions, 63 deletions

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 14c20610e5d..effcce4df86 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1302,13 +1302,105 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset,
 
 #endif /* CFG_FLASH_PROTECTION */
 
+/*-----------------------------------------------------------------------
+ * Reverse the order of the erase regions in the CFI QRY structure.
+ * This is needed for chips that are either a) correctly detected as
+ * top-boot, or b) buggy.
+ */
+static void cfi_reverse_geometry(struct cfi_qry *qry)
+{
+	unsigned int i, j;
+	u32 tmp;
+
+	for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
+		tmp = qry->erase_region_info[i];
+		qry->erase_region_info[i] = qry->erase_region_info[j];
+		qry->erase_region_info[j] = tmp;
+	}
+}
 
 /*-----------------------------------------------------------------------
  * read jedec ids from device and set corresponding fields in info struct
  *
  * Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
  *
-*/
+ */
+static void cmdset_intel_read_jedec_ids(flash_info_t *info)
+{
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
+	udelay(1000); /* some flash are slow to respond */
+	info->manufacturer_id = flash_read_uchar (info,
+					FLASH_OFFSET_MANUFACTURER_ID);
+	info->device_id = flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID);
+	flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+
+static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
+{
+	info->cmd_reset = FLASH_CMD_RESET;
+
+	cmdset_intel_read_jedec_ids(info);
+	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+#ifdef CFG_FLASH_PROTECTION
+	/* read legacy lock/unlock bit from intel flash */
+	if (info->ext_addr) {
+		info->legacy_unlock = flash_read_uchar (info,
+				info->ext_addr + 5) & 0x08;
+	}
+#endif
+
+	return 0;
+}
+
+static void cmdset_amd_read_jedec_ids(flash_info_t *info)
+{
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+	flash_unlock_seq(info, 0);
+	flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
+	udelay(1000); /* some flash are slow to respond */
+	info->manufacturer_id = flash_read_uchar (info,
+					FLASH_OFFSET_MANUFACTURER_ID);
+	info->device_id = flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID);
+	if (info->device_id == 0x7E) {
+		/* AMD 3-byte (expanded) device ids */
+		info->device_id2 = flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID2);
+		info->device_id2 <<= 8;
+		info->device_id2 |= flash_read_uchar (info,
+					FLASH_OFFSET_DEVICE_ID3);
+	}
+	flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+}
+
+static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
+{
+	info->cmd_reset = AMD_CMD_RESET;
+
+	cmdset_amd_read_jedec_ids(info);
+	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+	/* check if flash geometry needs reversal */
+	if (qry->num_erase_regions > 1) {
+		/* reverse geometry if top boot part */
+		if (info->cfi_version < 0x3131) {
+			/* CFI < 1.1, try to guess from device id */
+			if ((info->device_id & 0x80) != 0)
+				cfi_reverse_geometry(qry);
+		} else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
+			/* CFI >= 1.1, deduct from top/bottom flag */
+			/* note: ext_addr is valid since cfi_version > 0 */
+			cfi_reverse_geometry(qry);
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_FLASH_CFI_LEGACY
 static void flash_read_jedec_ids (flash_info_t * info)
 {
 	info->manufacturer_id = 0;
@@ -1318,41 +1410,17 @@ static void flash_read_jedec_ids (flash_info_t * info)
 	switch (info->vendor) {
 	case CFI_CMDSET_INTEL_STANDARD:
 	case CFI_CMDSET_INTEL_EXTENDED:
-		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
-		flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
-		udelay(1000); /* some flash are slow to respond */
-		info->manufacturer_id = flash_read_uchar (info,
-						FLASH_OFFSET_MANUFACTURER_ID);
-		info->device_id = flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID);
-		flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+		flash_read_jedec_ids_intel(info);
 		break;
 	case CFI_CMDSET_AMD_STANDARD:
 	case CFI_CMDSET_AMD_EXTENDED:
-		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
-		flash_unlock_seq(info, 0);
-		flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
-		udelay(1000); /* some flash are slow to respond */
-		info->manufacturer_id = flash_read_uchar (info,
-						FLASH_OFFSET_MANUFACTURER_ID);
-		info->device_id = flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID);
-		if (info->device_id == 0x7E) {
-			/* AMD 3-byte (expanded) device ids */
-			info->device_id2 = flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID2);
-			info->device_id2 <<= 8;
-			info->device_id2 |= flash_read_uchar (info,
-						FLASH_OFFSET_DEVICE_ID3);
-		}
-		flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+		flash_read_jedec_ids_amd(info);
 		break;
 	default:
 		break;
 	}
 }
 
-#ifdef CONFIG_FLASH_CFI_LEGACY
 /*-----------------------------------------------------------------------
  * Call board code to request info about non-CFI flash.
  * board_flash_get_legacy needs to fill in at least:
@@ -1514,7 +1582,6 @@ ulong flash_get_size (ulong base, int banknum)
 	uchar num_erase_regions;
 	int erase_region_size;
 	int erase_region_count;
-	int geometry_reversed = 0;
 	struct cfi_qry qry;
 
 	info->ext_addr = 0;
@@ -1530,51 +1597,36 @@ ulong flash_get_size (ulong base, int banknum)
 		info->ext_addr = le16_to_cpu(qry.p_adr);
 		num_erase_regions = qry.num_erase_regions;
 
-		flash_read_jedec_ids (info);
-		flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI);
-
 		if (info->ext_addr) {
 			info->cfi_version = (ushort) flash_read_uchar (info,
 						info->ext_addr + 3) << 8;
 			info->cfi_version |= (ushort) flash_read_uchar (info,
 						info->ext_addr + 4);
 		}
+
 #ifdef DEBUG
 		flash_printqry (&qry);
 #endif
+
 		switch (info->vendor) {
 		case CFI_CMDSET_INTEL_STANDARD:
 		case CFI_CMDSET_INTEL_EXTENDED:
-		default:
-			info->cmd_reset = FLASH_CMD_RESET;
-#ifdef CFG_FLASH_PROTECTION
-			/* read legacy lock/unlock bit from intel flash */
-			if (info->ext_addr) {
-				info->legacy_unlock = flash_read_uchar (info,
-						info->ext_addr + 5) & 0x08;
-			}
-#endif
+			cmdset_intel_init(info, &qry);
 			break;
 		case CFI_CMDSET_AMD_STANDARD:
 		case CFI_CMDSET_AMD_EXTENDED:
-			info->cmd_reset = AMD_CMD_RESET;
-			/* check if flash geometry needs reversal */
-			if (num_erase_regions <= 1)
-				break;
-			/* reverse geometry if top boot part */
-			if (info->cfi_version < 0x3131) {
-				/* CFI < 1.1, try to guess from device id */
-				if ((info->device_id & 0x80) != 0) {
-					geometry_reversed = 1;
-				}
-				break;
-			}
-			/* CFI >= 1.1, deduct from top/bottom flag */
-			/* note: ext_addr is valid since cfi_version > 0 */
-			if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
-				geometry_reversed = 1;
-			}
+			cmdset_amd_init(info, &qry);
 			break;
+		default:
+			printf("CFI: Unknown command set 0x%x\n",
+					info->vendor);
+			/*
+			 * Unfortunately, this means we don't know how
+			 * to get the chip back to Read mode. Might
+			 * as well try an Intel-style reset...
+			 */
+			flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+			return 0;
 		}
 
 		debug ("manufacturer is %d\n", info->vendor);
@@ -1596,18 +1648,14 @@ ulong flash_get_size (ulong base, int banknum)
 		sect_cnt = 0;
 		sector = base;
 		for (i = 0; i < num_erase_regions; i++) {
-			unsigned int region = i;
-
 			if (i > NUM_ERASE_REGIONS) {
 				printf ("%d erase regions found, only %d used\n",
 					num_erase_regions, NUM_ERASE_REGIONS);
 				break;
 			}
-			if (geometry_reversed)
-				region = num_erase_regions - 1 - i;
 
-			tmp = le32_to_cpu(qry.erase_region_info[region]);
-			debug("erase region %u: 0x%08lx\n", region, tmp);
+			tmp = le32_to_cpu(qry.erase_region_info[i]);
+			debug("erase region %u: 0x%08lx\n", i, tmp);
 
 			erase_region_count = (tmp & 0xffff) + 1;
 			tmp >>= 16;