arm: mvebu: Add CRS305-1G-4S board

CRS305-1G-4S has a switch chip with an integrated CPU (98DX3236) and
like some of the other similar boards requires bin_hdr.
bin_hdr (DDR3 init stage) is currently retrieved from the stock
bootloader and compiled into the kwb image.

Adds support for U-Boot, enable UART, SPI, Winbond SPI flash chip
support and writing env to SPI flash.

Signed-off-by: Luka Kovacic <me@lukakovacic.xyz>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>

13 files changed, 364 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8b971434eb..56bf5aa8de 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -162,7 +162,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-38x-controlcenterdc.dtb		\
 	armada-385-atl-x530.dtb			\
 	armada-385-atl-x530DP.dtb		\
-	armada-xp-db-xc3-24g4xg.dtb
+	armada-xp-db-xc3-24g4xg.dtb		\
+	armada-xp-crs305-1g-4s.dtb
 
 dtb-$(CONFIG_ARCH_UNIPHIER_LD11) += \
 	uniphier-ld11-global.dtb \
diff --git a/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi b/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi
new file mode 100644
index 0000000000..8576a02730
--- /dev/null
+++ b/arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+
+	spi-flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
diff --git a/arch/arm/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/dts/armada-xp-crs305-1g-4s.dts
new file mode 100644
index 0000000000..1116f5c96c
--- /dev/null
+++ b/arch/arm/dts/armada-xp-crs305-1g-4s.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS305-1G-4S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+#include "armada-xp-crs305-1g-4s-u-boot.dtsi"
+
+/ {
+	model = "CRS305-1G-4S";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index a832e1dc8c..495c48e6c7 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -164,6 +164,10 @@ config TARGET_DB_XC3_24G4XG
 	bool "Support DB-XC3-24G4XG"
 	select 98DX3336
 
+config TARGET_CRS305_1G_4S
+	bool "Support CRS305-1G-4S"
+	select 98DX3236
+
 endchoice
 
 config SYS_BOARD
@@ -183,6 +187,7 @@ config SYS_BOARD
 	default "a38x" if TARGET_CONTROLCENTERDC
 	default "x530" if TARGET_X530
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
+	default "crs305-1g-4s" if TARGET_CRS305_1G_4S
 
 config SYS_CONFIG_NAME
 	default "clearfog" if TARGET_CLEARFOG
@@ -201,6 +206,7 @@ config SYS_CONFIG_NAME
 	default "controlcenterdc" if TARGET_CONTROLCENTERDC
 	default "x530" if TARGET_X530
 	default "db-xc3-24g4xg" if TARGET_DB_XC3_24G4XG
+	default "crs305-1g-4s" if TARGET_CRS305_1G_4S
 
 config SYS_VENDOR
 	default "Marvell" if TARGET_DB_MV784MP_GP
@@ -218,6 +224,7 @@ config SYS_VENDOR
 	default "CZ.NIC" if TARGET_TURRIS_MOX
 	default "gdsys" if TARGET_CONTROLCENTERDC
 	default "alliedtelesis" if TARGET_X530
+	default "mikrotik" if TARGET_CRS305_1G_4S
 
 config SYS_SOC
 	default "mvebu"
diff --git a/board/mikrotik/crs305-1g-4s/.gitignore b/board/mikrotik/crs305-1g-4s/.gitignore
new file mode 100644
index 0000000000..775b9346b8
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/.gitignore
@@ -0,0 +1 @@
+kwbimage.cfg
diff --git a/board/mikrotik/crs305-1g-4s/MAINTAINERS b/board/mikrotik/crs305-1g-4s/MAINTAINERS
new file mode 100644
index 0000000000..3823489600
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/MAINTAINERS
@@ -0,0 +1,7 @@
+CRS305-1G-4S BOARD
+M:	Luka Kovacic <me@lukakovacic.xyz>
+S:	Maintained
+F:	board/mikrotik/crs305-1g-4s/
+F:	include/configs/crs305-1g-4s.h
+F:	configs/crs305-1g-4s_defconfig
+F:	arch/arm/dts/armada-xp-crs305-1g-4s.dts
diff --git a/board/mikrotik/crs305-1g-4s/Makefile b/board/mikrotik/crs305-1g-4s/Makefile
new file mode 100644
index 0000000000..895331beb8
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2015 Stefan Roese <sr@denx.de>
+
+obj-y	:= crs305-1g-4s.o
+extra-y	:= kwbimage.cfg
+
+quiet_cmd_sed = SED     $@
+      cmd_sed = sed $(SEDFLAGS_$(@F)) $< >$(dir $<)$(@F)
+
+SEDFLAGS_kwbimage.cfg =-e "s|^BINARY.*|BINARY $(srctree)/$(@D)/binary.0 0000005b 00000068|"
+$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \
+		include/config/auto.conf
+	  $(call if_changed,sed)
diff --git a/board/mikrotik/crs305-1g-4s/README b/board/mikrotik/crs305-1g-4s/README
new file mode 100644
index 0000000000..f420aabfbf
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/README
@@ -0,0 +1,23 @@
+MikroTik CRS305-1G-4S+IN
+========================
+
+CRS305-1G-4S+IN is a 4x SFP+ switch with a Gigabit Ethernet port for management.
+Specifications:
+ - Marvell Prestera 98DX3236 switch with an integrated ARMv7 CPU
+ - 512 MB DDR3 RAM
+ - UART @ 115200bps
+ - 4x SFP+
+ - Gigabit Ethernet (AR8033)
+ - 16 MB SPI flash (Winbond 25Q128JVSM)
+
+Currently supported hardware:
+ - UART boot (using kwboot) and console
+ - SPI boot, environment and load kernel
+
+Planned:
+ - Gigabit Ethernet support
+
+Getting binary.0
+================
+binary.0 (DDR3 init phase) can be retrieved/extracted from the integrated bootloader on the SPI flash.
+Then binary.0 can be replaced with the extracted blob.
diff --git a/board/mikrotik/crs305-1g-4s/binary.0 b/board/mikrotik/crs305-1g-4s/binary.0
new file mode 100644
index 0000000000..8dd687286a
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/binary.0
@@ -0,0 +1,11 @@
+--------
+WARNING:
+--------
+This file should contain the bin_hdr generated by the original Marvell
+U-Boot implementation. As this is currently not included in this
+U-Boot version, we have added this placeholder, so that the U-Boot
+image can be generated without errors.
+
+If you have a known to be working bin_hdr for your board, then you
+just need to replace this text file here with the binary header
+and recompile U-Boot.
diff --git a/board/mikrotik/crs305-1g-4s/crs305-1g-4s.c b/board/mikrotik/crs305-1g-4s/crs305-1g-4s.c
new file mode 100644
index 0000000000..d1d1f40092
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/crs305-1g-4s.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/gpio.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * These values and defines are taken from the Marvell U-Boot version
+ * "u-boot-2013.01-2016_T1.0.eng_drop_v6"
+ */
+#define DB_DX_AC3_GPP_OUT_ENA_LOW	(~(BIT(0) | BIT(2) | BIT(3) | BIT(4) \
+					| BIT(6) | BIT(12) | BIT(13) \
+					| BIT(16) | BIT(17) | BIT(20) \
+					| BIT(29)  | BIT(30)))
+#define DB_DX_AC3_GPP_OUT_ENA_MID	(~(0))
+#define DB_DX_AC3_GPP_OUT_VAL_LOW	(BIT(0) | BIT(2) | BIT(3) | BIT(4) \
+					| BIT(6) | BIT(12) | BIT(13) \
+					| BIT(16) | BIT(17) | BIT(20) \
+					| BIT(29)  | BIT(30))
+#define DB_DX_AC3_GPP_OUT_VAL_MID	0x0
+#define DB_DX_AC3_GPP_POL_LOW		0x0
+#define DB_DX_AC3_GPP_POL_MID		0x0
+
+int board_early_init_f(void)
+{
+	/* Configure MPP */
+	writel(0x00142222, MVEBU_MPP_BASE + 0x00);
+	writel(0x11122000, MVEBU_MPP_BASE + 0x04);
+	writel(0x44444004, MVEBU_MPP_BASE + 0x08);
+	writel(0x14444444, MVEBU_MPP_BASE + 0x0c);
+	writel(0x00000001, MVEBU_MPP_BASE + 0x10);
+
+	/*
+	 * MVEBU_GPIO0_BASE is the User LED
+	 * MVEBU_GPIO1_BASE is the Reset Button (currently not used)
+	 */
+
+	/* Set GPP Out value */
+	writel(DB_DX_AC3_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+	/* writel(DB_DX_AC3_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00); */
+
+	/* Set GPP Polarity */
+	writel(DB_DX_AC3_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
+	/* writel(DB_DX_AC3_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c); */
+
+	/* Set GPP Out Enable */
+	writel(DB_DX_AC3_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+	/* writel(DB_DX_AC3_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04); */
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: " CONFIG_SYS_BOARD "\n");
+
+	return 0;
+}
diff --git a/board/mikrotik/crs305-1g-4s/kwbimage.cfg.in b/board/mikrotik/crs305-1g-4s/kwbimage.cfg.in
new file mode 100644
index 0000000000..2dbbbd0246
--- /dev/null
+++ b/board/mikrotik/crs305-1g-4s/kwbimage.cfg.in
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2014 Stefan Roese <sr@denx.de>
+#
+
+# Armada XP uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+BOOT_FROM	spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY board/mikrotik/crs305-1g-4s/binary.0 0000005b 00000068
diff --git a/configs/crs305-1g-4s_defconfig b/configs/crs305-1g-4s_defconfig
new file mode 100644
index 0000000000..66ba04ede8
--- /dev/null
+++ b/configs/crs305-1g-4s_defconfig
@@ -0,0 +1,52 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_CRS305_1G_4S=y
+CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_USB is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_UBI=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_BLK=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEVICE=y
+# CONFIG_NAND is not set
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
+# CONFIG_USB is not set
+# CONFIG_DM_USB is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_HOST_ETHER is not set
diff --git a/include/configs/crs305-1g-4s.h b/include/configs/crs305-1g-4s.h
new file mode 100644
index 0000000000..c73cb99b1b
--- /dev/null
+++ b/include/configs/crs305-1g-4s.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ */
+
+#ifndef _CONFIG_CRS305_1G_4S_H
+#define _CONFIG_CRS305_1G_4S_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
+#define CONFIG_SYS_TCLK		200000000	/* 200MHz */
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
+#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
+#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
+
+/* Keep device tree and initrd in lower memory so the kernel can access them */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fdt_high=0x10000000\0"		\
+	"initrd_high=0x10000000\0"
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+#undef CONFIG_SYS_MAXARGS
+#define CONFIG_SYS_MAXARGS 96
+
+#endif /* _CONFIG_CRS305_1G_4S_H */