Merge branch 'master' of http://www.denx.de/git/u-boot

38 files changed, 1434 insertions, 101 deletions

diff --git a/CHANGELOG b/CHANGELOG
index e39b1e7510e..82be4e3d779 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,55 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add support for WTK FO300 board (TQM5200 based).
+
+* Fix TQM834x hang.
+
+* Update for SC520 board.
+  Patch by David Updegraff, 02 Dec 2005
+
+* Fixed common.h spelling error.
+  Patch by Cory Tusar, 30 Nov 2005
+
+* Fix typo.
+  Patch by Andreas Engel, 28 Nov 2005
+
+* Fix fatload command on FAT32 formatted partitions.
+  Patch by Joachim Jaeger, 18 Nov 2005
+
+* Fix drivers/dm9000.c when configured in 32 bit mode.
+  Patch by Eric Benard, 17 Nov 2005
+
+* Cleanup debug code for yucca board.
+
+* MCC200: restrict addressable flash space to 32 MB
+
+* Add debug console on COM12 for MCC200 board
+
+* Fix control-c handing in CONFIG_CMDLINE_EDITING
+  Properly pass break code back from readline.
+  Patch by Roger Blofeld, 31 Jul 2006
+
+* Add commandline history support to all AMCC eval boards
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Add Macronix MXLV320T flash support for AMCC Bamboo
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Change "mii info" to not print an error upon missing PHY at address
+  Patch by Stefan Roese, 07 Aug 2006
+
+* Fix PCI-Express on PPC440SPe rev. A.
+
+* Fix preboot message on TQM85xx after switching to hush parser.
+
+* Adapt TQM85xx ramdisk address to Linux kernel memory map
+
+* Add initial support for PCI-Express on PPC440SPe (Yucca board).
+
+* Fix compiler warning for TRAB board.
+  Patch by Martin Krause, 07 Aug 2006
+
 * Prevent USB commands from working when USB is stopped.
 
 * Add rudimentary handling of alternate settings of USB interfaces.
diff --git a/MAKEALL b/MAKEALL
index 467a9bee0a7..720ab03bd37 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -25,11 +25,11 @@ LIST_5xx="	\
 #########################################################################
 
 LIST_5xxx="	\
-	BC3450		cpci5200	EVAL5200	icecube_5100	\
-	icecube_5200	lite5200b	mcc200		o2dnt		\
-	pf5200		PM520		TB5200		Total5100	\
-	Total5200	Total5200_Rev2	TQM5200		TQM5200_B	\
-	TQM5200S							\
+	BC3450		cpci5200	EVAL5200	fo300		\
+	icecube_5100	icecube_5200	lite5200b	mcc200		\
+	o2dnt		pf5200		PM520		TB5200		\
+	Total5100	Total5200	Total5200_Rev2	TQM5200		\
+	TQM5200_B	TQM5200S					\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 2eec40df89d..8cc2664c430 100644
--- a/Makefile
+++ b/Makefile
@@ -328,6 +328,7 @@ lite5200b_LOWBOOT_config:	unconfig
 mcc200_config	\
 mcc200_SDRAM	\
 mcc200_highboot	\
+mcc200_COM12	\
 mcc200_highboot_SDRAM:	unconfig
 	@ >include/config.h
 	@[ -n "$(findstring highboot,$@)" ] || \
@@ -344,6 +345,10 @@ mcc200_highboot_SDRAM:	unconfig
 		{ echo "#define CONFIG_MCC200_SDRAM"	>>include/config.h ; \
 		  echo "... with SDRAM" ; \
 		}
+	@[ -z "$(findstring COM12,$@)" ] || \
+		{ echo "#define CONFIG_CONSOLE_COM12"	>>include/config.h ; \
+		  echo "... with console on COM12" ; \
+		}
 	@./mkconfig -a mcc200 ppc mpc5xxx mcc200
 
 o2dnt_config:
@@ -415,25 +420,30 @@ Total5200_Rev2_lowboot_config:	unconfig
 		}
 	@./mkconfig -a Total5200 ppc mpc5xxx total5200
 
-TQM5200_config	\
-TQM5200_B_config \
-TQM5200_B_HIGHBOOT_config \
+cam5200_config \
+fo300_config \
+MiniFAP_config \
 TQM5200S_config \
 TQM5200S_HIGHBOOT_config \
-TQM5200_STK100_config \
-cam5200_config \
-MiniFAP_config:	unconfig
+TQM5200_B_config \
+TQM5200_B_HIGHBOOT_config \
+TQM5200_config	\
+TQM5200_STK100_config:	unconfig
 	@ >include/config.h
-	@[ -z "$(findstring MiniFAP,$@)" ] || \
-		{ echo "#define CONFIG_MINIFAP"	>>include/config.h ; \
-		  echo "... TQM5200_AC on MiniFAP" ; \
-		}
 	@[ -z "$(findstring cam5200,$@)" ] || \
 		{ echo "#define CONFIG_CAM5200"	>>include/config.h ; \
 		  echo "#define CONFIG_TQM5200S"	>>include/config.h ; \
 		  echo "#define CONFIG_TQM5200_B"	>>include/config.h ; \
 		  echo "... TQM5200S on Cam5200" ; \
 		}
+	@[ -z "$(findstring fo300,$@)" ] || \
+		{ echo "#define CONFIG_FO300"	>>include/config.h ; \
+		  echo "... TQM5200 on FO300" ; \
+		}
+	@[ -z "$(findstring MiniFAP,$@)" ] || \
+		{ echo "#define CONFIG_MINIFAP"	>>include/config.h ; \
+		  echo "... TQM5200_AC on MiniFAP" ; \
+		}
 	@[ -z "$(findstring STK100,$@)" ] || \
 		{ echo "#define CONFIG_STK52XX_REV100"	>>include/config.h ; \
 		  echo "... on a STK52XX.100 base board" ; \
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index 3a50b095ca2..a0acbba70c3 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -76,6 +76,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_MAN_SST:
 		printf("SST ");
 		break;
+        case FLASH_MAN_MX:
+		printf ("MACRONIX ");
+		break;
 	default:
 		printf("Unknown Vendor ");
 		break;
@@ -124,6 +127,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_STMW320DT:
 		printf ("M29W320DT (32 M, top sector)\n");
 		break;
+	case FLASH_MXLV320T:
+		printf ("MXLV320T (32 Mbit, top sector)\n");
+		break;
 	default:
 		printf("Unknown Chip Type\n");
 		break;
@@ -375,6 +381,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
 		return flash_erase_2(info, s_first, s_last);
 	} else {
@@ -555,6 +562,7 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
 		return write_word_2(info, dest, data);
 	} else {
@@ -648,6 +656,9 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
+	case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
@@ -676,6 +687,12 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
+	case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+		info->flash_id += FLASH_MXLV320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;
+		break;	/* => 4 MB	*/
+
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);	/* => no or unknown flash */
@@ -711,6 +728,19 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 			--i;
 			info->start[i] = base;
 		}
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000a000;
+		info->start[i--] = base + info->size - 0x0000c000;
+		info->start[i--] = base + info->size - 0x0000e000;
+		info->start[i--] = base + info->size - 0x00010000;
+
+		for (; i >= 0; i--)
+			info->start[i] = base + i * 0x00010000;
 	} else {
 		if (info->flash_id & FLASH_BTYPE) {
 			/* set sector offsets for bottom boot block type        */
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index cb289366818..c9eca686b25 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -82,9 +82,49 @@
  *************************************************************************/
 
 	.section .bootpg,"ax"
-	.globl tlbtab
 
-tlbtab:
+/**************************************************************************
+ * TLB table for revA
+ *************************************************************************/
+	.globl tlbtabA
+tlbtabA:
+	tlbtab_start
+	tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
+
+	tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+
+	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbtab_end
+
+/**************************************************************************
+ * TLB table for revB
+ *
+ * Notice: revB of the 440SPe chip is very strict about PLB real addresses
+ * and ranges to be mapped for config space: it seems to only work with
+ * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
+ * set otherwise) while revA uses c_nnnn_nnnn.
+ *************************************************************************/
+	.globl tlbtabB
+tlbtabB:
 	tlbtab_start
 	tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
 
@@ -94,11 +134,19 @@ tlbtab:
 	tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
-	tlbentry(CFG_FPGA_BASE,SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+	tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
 
-	tlbentry(CFG_OPER_FLASH,SZ_16M,0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
 	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 
 	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index ce1312cf7da..af12839c2c3 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -21,12 +21,16 @@
  * MA 02111-1307 USA
  *
  * Port to AMCC-440SPE Evaluation Board SOP - April 2005
+ *
+ * PCIe supporting routines derived from Linux 440SPe PCIe driver.
  */
 
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include <i2c.h>
+#include <asm-ppc/io.h>
+
 #include "yucca.h"
 
 void fpga_init (void);
@@ -39,6 +43,9 @@ int get_console_port(void);
 unsigned long ppcMfcpr(unsigned long cpr_reg);
 unsigned long ppcMfsdr(unsigned long sdr_reg);
 
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
 #define DEBUG_ENV
 #ifdef DEBUG_ENV
 #define DEBUGF(fmt,args...) printf(fmt ,##args)
@@ -908,6 +915,7 @@ void pci_target_init(struct pci_controller * hose )
 }
 #endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
+#if defined(CONFIG_PCI)
 /*************************************************************************
  *  is_pci_host
  *
@@ -923,12 +931,132 @@ void pci_target_init(struct pci_controller * hose )
  *
  *
  ************************************************************************/
-#if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
 	/* The yucca board is always configured as host. */
 	return 1;
 }
+
+
+int yucca_pcie_card_present(int port)
+{
+	u16 reg;
+
+	reg = in_be16((u16 *)FPGA_REG1C);
+	switch(port) {
+	case 0:
+		return !(reg & FPGA_REG1C_PE0_PRSNT);
+	case 1:
+		return !(reg & FPGA_REG1C_PE1_PRSNT);
+	case 2:
+		return !(reg & FPGA_REG1C_PE2_PRSNT);
+	default:
+		return 0;
+	}
+}
+
+/*
+ * For the given slot, set rootpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * and turn off reset.
+ */
+void yucca_setup_pcie_fpga_rootpoint(int port)
+{
+	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+	switch(port) {
+	case 0:
+		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
+		endpoint    = 0;
+		power 	    = FPGA_REG1A_PE0_PWRON;
+		green_led   = FPGA_REG1A_PE0_GLED;
+		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE0_YLED;
+		reset_off   = FPGA_REG1C_PE0_PERST;
+		break;
+	case 1:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
+		power 	    = FPGA_REG1A_PE1_PWRON;
+		green_led   = FPGA_REG1A_PE1_GLED;
+		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE1_YLED;
+		reset_off   = FPGA_REG1C_PE1_PERST;
+		break;
+	case 2:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
+		power 	    = FPGA_REG1A_PE2_PWRON;
+		green_led   = FPGA_REG1A_PE2_GLED;
+		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE2_YLED;
+		reset_off   = FPGA_REG1C_PE2_PERST;
+		break;
+
+	default:
+		return;
+	}
+
+	out_be16((u16 *)FPGA_REG1A,
+		 ~(power | clock | green_led) &
+		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+
+	out_be16((u16 *)FPGA_REG1C,
+		 ~(endpoint | reset_off) &
+		 (rootpoint | in_be16((u16 *)FPGA_REG1C)));
+	/*
+	 * Leave device in reset for a while after powering on the
+	 * slot to give it a chance to initialize.
+	 */
+	udelay(250 * 1000);
+
+	out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
+}
+
+
+static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
+
+void pcie_setup_hoses(void)
+{
+	struct pci_controller *hose;
+	int i, bus;
+
+	/*
+	 * assume we're called after the PCIX hose is initialized, which takes
+	 * bus ID 0 and therefore start numbering PCIe's from 1.
+	 */
+	bus = 1;
+	for (i = 0; i <= 2; i++) {
+		/* Check for yucca card presence */
+		if (!yucca_pcie_card_present(i))
+			continue;
+
+		yucca_setup_pcie_fpga_rootpoint(i);
+
+		if (ppc440spe_init_pcie_rootport(i)) {
+			printf("PCIE%d: initialization failed\n", i);
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno  = bus;
+		bus++;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			CFG_PCIE_MEMSIZE,
+			PCI_REGION_MEM
+			);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		ppc440spe_setup_pcie(hose, i);
+		hose->last_busno = pci_hose_scan(hose);
+	}
+}
 #endif	/* defined(CONFIG_PCI) */
 
 int misc_init_f (void)
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 167dc0f8464..775030c17cb 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -203,6 +203,8 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
+	ulong flash_sup_end, snum;
+
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -257,6 +259,12 @@ int misc_init_r (void)
 			       (flash_info[0].start[0] - 1) + flash_info[0].size,
 			       &flash_info[0]);
 		*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
+		printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
+		flash_info[0].size = 32 << 20;
+		for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); 
+			flash_info[0].start[snum] < flash_sup_end; 
+			snum++);
+		flash_info[0].sector_count = snum;
 	}
 
 	return (0);
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index c37d4c662ef..7af69f21a23 100755
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -30,8 +30,8 @@
 #include <command.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#if defined (CONFIG_STK52XX)
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define DEFAULT_VOL	45
 #define DEFAULT_FREQ	500
 #define DEFAULT_DURATION	200
@@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	return rcode;
 }
+#endif
 
+#if defined(CONFIG_STK52XX)
 void led_init(void)
 {
 	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
@@ -736,7 +738,9 @@ int do_led(char *argv[])
 
 	return 0;
 }
+#endif
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 /*
  * return 1 on CAN initialization failure
  * return 0 if no failure
@@ -1106,6 +1110,7 @@ int do_rs232(char *argv[])
 	return error_status;
 }
 
+#ifndef CONFIG_FO300
 static void sm501_backlight (unsigned int state)
 {
 	if (state == BL_ON) {
@@ -1115,6 +1120,7 @@ static void sm501_backlight (unsigned int state)
 		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
 			~((1 << 26) | (1 << 27));
 }
+#endif
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1124,7 +1130,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	printf ("Revision 100 of STK52XX not supported!\n");
 	return 1;
 #endif
+#if defined(CONFIG_STK52XX)
 	led_init();
+#endif
 	can_init();
 
 	switch (argc) {
@@ -1152,6 +1160,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			else
 				printf ("Error\n");
 			return rcode;
+#ifndef CONFIG_FO300
 		} else if (strncmp (argv[1], "backlight", 4) == 0) {
 			if (strncmp (argv[2], "on", 2) == 0) {
 				sm501_backlight (BL_ON);
@@ -1161,14 +1170,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				sm501_backlight (BL_OFF);
 				return 0;
 			}
+#endif
 		}
 		break;
 
+#if defined(CONFIG_STK52XX)
 	case 4:
 		if (strcmp (argv[1], "led") == 0) {
 			return (do_led (argv));
 		}
 		break;
+#endif
 
 	default:
 		break;
@@ -1204,7 +1216,9 @@ U_BOOT_CMD(
 	"[channel]\n"
 	"    - play short beep on \"l\"eft or \"r\"ight channel\n"
 );
+#endif /* CONFIG_STK52XX  || CONFIG_FO300 */
 
+#if defined(CONFIG_STK52XX)
 U_BOOT_CMD(
 	fkt ,	4,	1,	cmd_fkt,
 	"fkt     - Function test routines\n",
@@ -1217,5 +1231,14 @@ U_BOOT_CMD(
 	"fkt backlight on/off\n"
 	"     - switch backlight on or off\n"
 );
-#endif /* CONFIG_STK52XX */
+#elif defined(CONFIG_FO300)
+U_BOOT_CMD(
+	fkt ,	3,	1,	cmd_fkt,
+	"fkt     - Function test routines\n",
+	"fkt can\n"
+	"     - loopback plug for X16/X29 required\n"
+	"fkt rs232 number\n"
+	"     - loopback plug(s) for X21/X22 required\n"
+);
+#endif
 #endif /* CFG_CMD_BSP */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index d6f7737d5bd..c8350ab3b5d 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -290,8 +290,10 @@ int checkboard (void)
 # define CARRIER_NAME	"TB5200"
 #elif defined(CONFIG_CAM5200)
 # define CARRIER_NAME	"Cam5200"
+#elif defined(CONFIG_FO300)
+# define CARRIER_NAME	"FO300"
 #else
-# error "Unknown carrier board"
+# error "UNKNOWN"
 #endif
 
 	puts (	"Board: " MODULE_NAME " (TQ-Components GmbH)\n"
@@ -541,7 +543,11 @@ int last_stage_init (void)
 
 #ifdef CONFIG_VIDEO_SM501
 
+#ifdef CONFIG_FO300
+#define DISPLAY_WIDTH   800
+#else
 #define DISPLAY_WIDTH   640
+#endif
 #define DISPLAY_HEIGHT  480
 
 #ifdef CONFIG_VIDEO_SM501_8BPP
@@ -571,6 +577,28 @@ static const SMI_REGS init_regs [] =
 	{0x80218, 0x000201e9},
 	{0x80200, 0x00013306},
 #else  /* panel + CRT */
+#ifdef CONFIG_FO300
+	{0x00004, 0x0},
+	{0x00048, 0x00021807},
+	{0x0004C, 0x301a0a01},
+	{0x00054, 0x1},
+	{0x00040, 0x00021807},
+	{0x00044, 0x091a0a01},
+	{0x00054, 0x0},
+	{0x80000, 0x0f013106},
+	{0x80004, 0xc428bb17},
+	{0x8000C, 0x00000000},
+	{0x80010, 0x0C800C80},
+	{0x80014, 0x03200000},
+	{0x80018, 0x01e00000},
+	{0x8001C, 0x00000000},
+	{0x80020, 0x01e00320},
+	{0x80024, 0x042a031f},
+	{0x80028, 0x0086034a},
+	{0x8002C, 0x020c01df},
+	{0x80030, 0x000201ea},
+	{0x80200, 0x00010000},
+#else
 	{0x00004, 0x0},
 	{0x00048, 0x00021807},
 	{0x0004C, 0x091a0a01},
@@ -591,6 +619,7 @@ static const SMI_REGS init_regs [] =
 	{0x8002C, 0x020c01df},
 	{0x80030, 0x000201e9},
 	{0x80200, 0x00010000},
+#endif /* #ifdef CONFIG_FO300 */
 #endif
 	{0, 0}
 };
@@ -604,7 +633,7 @@ void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1) {
 	strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200)
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300)
 	} else if (line_number == 2) {
 #if defined (CONFIG_STK52XX)
 		strcpy (info, "        on a STK52xx carrier board");
@@ -612,6 +641,9 @@ void video_get_info_str (int line_number, char *info)
 #if defined (CONFIG_TB5200)
 		strcpy (info, "        on a TB5200 carrier board");
 #endif
+#if defined (CONFIG_FO300)
+		strcpy (info, "        on a FO300 carrier board");
+#endif
 #endif
 	}
 	else {
@@ -697,3 +729,33 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+#ifdef CONFIG_FO300
+int board_early_init_f (void)
+{
+	vu_long timer3_status;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Configure GPT3 as GPIO input */
+	*(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+	/* Read in TIMER_3 pin status */
+	timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+	
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+	/* Force silent console mode if S1 switch
+	 * is in closed position (TIMER_3 pin status is LOW). */
+	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+#else
+	/* Force silent console mode if S1 switch
+	 * is in open position (TIMER_3 pin status is HIGH). */
+	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+#endif
+		gd->flags |= GD_FLG_SILENT;
+
+	return 0;
+}
+#endif
+#endif
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 26e52d29e87..d8a726b226f 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -175,9 +175,11 @@ int misc_init_r (void)
 #endif /* CONFIG_VERSION_VARIABLE */
 
 #ifdef CONFIG_AUTO_UPDATE
-	extern int do_auto_update(void);
-	/* this has priority over all else */
-	do_auto_update();
+	{
+		extern int do_auto_update(void);
+		/* this has priority over all else */
+		do_auto_update();
+	}
 #endif
 
 	for (i = 0; i < KEYBD_KEY_NUM; ++i) {
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index ee5e43ee8c7..e6595360cbe 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -117,8 +117,6 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					miiphy_speed (devname, j),
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
-			} else {
-				puts ("Error reading info from the PHY\n");
 			}
 		}
 	} else if (op == 'r') {
@@ -503,8 +501,6 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					miiphy_speed (devname, j),
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
-			} else {
-				puts ("Error reading info from the PHY\n");
 			}
 		}
 	} else if (op[0] == 'r') {
diff --git a/common/main.c b/common/main.c
index 3788bd5e4a1..13d12a43080 100644
--- a/common/main.c
+++ b/common/main.c
@@ -937,6 +937,7 @@ int readline (const char *const prompt)
 #ifdef CONFIG_CMDLINE_EDITING
 	char *p = console_buffer;
 	unsigned int len=MAX_CMDBUF_SIZE;
+	int rc;
 	static int initted = 0;
 
 	if (!initted) {
@@ -946,8 +947,8 @@ int readline (const char *const prompt)
 
 	puts (prompt);
 
-	cread_line(p, &len);
-	return len;
+	rc = cread_line(p, &len);
+	return rc < 0 ? rc : len;
 #else
 	char   *p = console_buffer;
 	int	n = 0;				/* buffer index		*/
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index c83f0bb6cf3..1c4370b0819 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -31,7 +31,9 @@
 #include <common.h>
 #include <config.h>
 #include <pci.h>
+#ifdef CONFIG_SC520_SSI
 #include <ssi.h>
+#endif
 #include <asm/io.h>
 #include <asm/pci.h>
 #include <asm/ic/sc520.h>
@@ -143,7 +145,15 @@ unsigned long init_sc520_dram(void)
 
 	u32 dram_present=0;
 	u32 dram_ctrl;
-
+#ifdef CFG_SDRAM_DRCTMCTL
+	/* these memory control registers are set up in the assember part,
+	 * in sc520_asm.S, during 'mem_init'.  If we muck with them here,
+	 * after we are running a stack in RAM, we have troubles.  Besides,
+	 * these refresh and delay values are better ? simply specified 
+	 * outright in the include/configs/{cfg} file since the HW designer
+	 * simply dictates it.
+	 */
+#else
 	int val;
 
 	int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
@@ -162,6 +172,7 @@ unsigned long init_sc520_dram(void)
 	} else {
 		val = 3;  /* 62.4us */
 	}
+
 	write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4));
 
 	val = read_mmcr_byte(SC520_DRCTMCTL);
@@ -181,13 +192,12 @@ unsigned long init_sc520_dram(void)
 		val |= 1;
 	}
 	write_mmcr_byte(SC520_DRCTMCTL, val);
-
+#endif
 
 	/* We read-back the configuration of the dram
 	 * controller that the assembly code wrote */
 	dram_ctrl = read_mmcr_long(SC520_DRCBENDADR);
 
-
 	bd->bi_dram[0].start = 0;
 	if (dram_ctrl & 0x80) {
 		/* bank 0 enabled */
@@ -274,7 +284,7 @@ int pci_sc520_set_irq(int pci_pin, int irq)
 {
 	int i;
 
-# if 0
+# if 1
 	printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
 #endif
 	if (irq < 0 || irq > 15) {
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 80464fa78b0..e1fa37a4a61 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -113,6 +113,7 @@
 .equ            DRCCFG,     0x0fffef014   /* DRAM bank configuration register */
 .equ            DRCBENDADR, 0x0fffef018   /* DRAM bank ending address register */
 .equ            ECCCTL,     0x0fffef020   /* DRAM ECC control register */
+.equ            ECCINT,     0x0fffefd18   /* DRAM ECC nmi-INT mapping */
 .equ            DBCTL,      0x0fffef040   /* DRAM buffer control register */
 
 .equ            CACHELINESZ, 0x00000010   /* size of our cache line (read buffer) */
@@ -459,6 +460,12 @@ emptybank:
 	incl    %edi
 	loop    cleanuplp
 
+#if defined CFG_SDRAM_DRCTMCTL
+	/* just have your hardware desinger _GIVE_ you what you need here! */
+	movl    $DRCTMCTL, %edi   
+	movb    $CFG_SDRAM_DRCTMCTL,%al
+	movb    (%edi), %al
+#else
 #if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
 	/* set the CAS latency now since it is hard to do
 	 * when we run from the RAM */
@@ -470,7 +477,8 @@ emptybank:
 #ifdef CFG_SDRAM_CAS_LATENCY_3T
 	orb     $0x10, %al
 #endif
-	movb    %al, (%edi)
+	movb    %al, (%edi) 
+#endif
 #endif
 	movl    $DRCCTL, %edi            /* DRAM Control register */
 	movb    $0x3,%al                 /* Load mode register cmd */
@@ -528,9 +536,49 @@ bank0: 	movl	(%edi), %eax
 	shll	$22, %eax
 	movl	%eax, %ebx
 
-done:	movl	%ebx, %eax
 
+done:	
+	movl	%ebx, %eax
+
+#if CFG_SDRAM_ECC_ENABLE
+	/* A nominal memory test: just a byte at each address line */
+	movl    %eax, %ecx
+	shrl    $0x1, %ecx
+	movl	$0x1, %edi
+memtest0:
+	movb	$0xa5, (%edi)
+	cmpb    $0xa5, (%edi) 
+	jne	out
+	shrl	$1, %ecx
+	andl	%ecx,%ecx
+	jz	set_ecc
+	shll	$1, %edi
+	jmp	memtest0
+
+set_ecc:
+	/* clear all ram with a memset */
+	movl	%eax, %ecx
+	xorl	%esi, %esi
+	xorl	%edi, %edi
+	xorl	%eax, %eax
+	shrl	$2, %ecx
+	cld
+	rep 	stosl
+			/* enable read, write buffers */
+	movb    $0x11, %al
+	movl    $DBCTL, %edi
+	movb    %al, (%edi)
+			/* enable NMI mapping for ECC */
+	movl    $ECCINT, %edi
+	mov	$0x10, %al
+	movb    %al, (%edi) 
+			/* Turn on ECC */
+	movl    $ECCCTL, %edi
+	mov	$0x05, %al
+	movb    %al, (%edi) 
+#endif
+out:
+	movl	%ebx, %eax
 	jmp	*%ebp
 
-
 #endif /* CONFIG_SC520 */
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index cf5eccb01fd..0b0686bcf71 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -315,7 +315,6 @@ void pci_405gp_init(struct pci_controller *hose)
 #ifdef CONFIG_PCI_SCAN_SHOW
 		printf("PCI:   Bus Dev VenId DevId Class Int\n");
 #endif
-
 		hose->last_busno = pci_hose_scan(hose);
 	}
 #endif  /* CONFIG_PCI_PNP */
@@ -563,10 +562,12 @@ void pci_440_init (struct pci_controller *hose)
 	}
 }
 
-
 void pci_init_board(void)
 {
 	pci_440_init (&ppc440_hose);
+#if defined(CONFIG_440SPE)
+	pcie_setup_hoses();
+#endif
 }
 
 #endif /* CONFIG_440 & CONFIG_PCI */
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
new file mode 100644
index 00000000000..2e920aadf01
--- /dev/null
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -0,0 +1,592 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm-ppc/io.h>
+#include <ppc4xx.h>
+#include <common.h>
+#include <pci.h>
+
+#include "440spe_pcie.h"
+
+#if defined(CONFIG_440SPE)
+#if defined(CONFIG_PCI)
+
+enum {
+	PTYPE_ENDPOINT		= 0x0,
+	PTYPE_LEGACY_ENDPOINT	= 0x1,
+	PTYPE_ROOT_PORT		= 0x4,
+
+	LNKW_X1			= 0x1,
+	LNKW_X4			= 0x4,
+	LNKW_X8			= 0x8
+};
+
+static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
+	int offset, int len, u32 *val) {
+
+	*val = 0;
+	/*
+	 * 440SPE implements only one function per port
+	 */
+	if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1)))
+		return 0;
+
+	devfn = PCI_BDF(0,0,0);
+	offset += devfn << 4;
+
+	switch (len) {
+	case 1:
+		*val = in_8(hose->cfg_data + offset);
+		break;
+	case 2:
+		*val = in_le16((u16 *)(hose->cfg_data + offset));
+		break;
+	default:
+		*val = in_le32((u32 *)(hose->cfg_data + offset));
+		break;
+	}
+	return 0;
+}
+
+static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
+	int offset, int len, u32 val) {
+
+	/*
+	 * 440SPE implements only one function per port
+	 */
+	if (!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 1)))
+		return 0;
+
+	devfn = PCI_BDF(0,0,0);
+	offset += devfn << 4;
+
+	switch (len) {
+	case 1:
+		out_8(hose->cfg_data + offset, val);
+		break;
+	case 2:
+		out_le16((u16 *)(hose->cfg_data + offset), val);
+		break;
+	default:
+		out_le32((u32 *)(hose->cfg_data + offset), val);
+		break;
+	}
+	return 0;
+}
+
+int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
+{
+	u32 v;
+	int rv;
+
+	rv =  pcie_read_config(hose, dev, offset, 1, &v);
+	*val = (u8)v;
+	return rv;
+}
+
+int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
+{
+	u32 v;
+	int rv;
+
+	rv = pcie_read_config(hose, dev, offset, 2, &v);
+	*val = (u16)v;
+	return rv;
+}
+
+int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
+{
+	u32 v;
+	int rv;
+
+	rv = pcie_read_config(hose, dev, offset, 3, &v);
+	*val = (u32)v;
+	return rv;
+}
+
+int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
+{
+	return pcie_write_config(hose,(u32)dev,offset,1,val);
+}
+
+int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
+{
+	return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
+}
+
+int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
+{
+	return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
+}
+
+static void ppc440spe_setup_utl(u32 port) {
+
+	volatile void *utl_base = NULL;
+
+	/*
+	 * Map UTL registers
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+		break;
+	}
+	utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+	
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
+	out_be32(utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
+	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
+	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
+}
+
+static int check_error(void)
+{
+	u32 valPE0, valPE1, valPE2;
+	int err = 0;
+
+	/* SDR0_PEGPLLLCT1 reset */
+	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+		printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
+	}
+
+	valPE0 = SDR_READ(PESDR0_RCSSET);
+	valPE1 = SDR_READ(PESDR1_RCSSET);
+	valPE2 = SDR_READ(PESDR2_RCSSET);
+
+	/* SDR0_PExRCSSET rstgu */
+	if (!(valPE0 & 0x01000000) ||
+	    !(valPE1 & 0x01000000) ||
+	    !(valPE2 & 0x01000000)) {
+		printf("PCIE:  SDR0_PExRCSSET rstgu error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rstdl */
+	if (!(valPE0 & 0x00010000) ||
+	    !(valPE1 & 0x00010000) ||
+	    !(valPE2 & 0x00010000)) {
+		printf("PCIE:  SDR0_PExRCSSET rstdl error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rstpyn */
+	if ((valPE0 & 0x00001000) ||
+	    (valPE1 & 0x00001000) ||
+	    (valPE2 & 0x00001000)) {
+		printf("PCIE:  SDR0_PExRCSSET rstpyn error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET hldplb */
+	if ((valPE0 & 0x10000000) ||
+	    (valPE1 & 0x10000000) ||
+	    (valPE2 & 0x10000000)) {
+		printf("PCIE:  SDR0_PExRCSSET hldplb error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET rdy */
+	if ((valPE0 & 0x00100000) ||
+	    (valPE1 & 0x00100000) ||
+	    (valPE2 & 0x00100000)) {
+		printf("PCIE:  SDR0_PExRCSSET rdy error\n");
+		err = -1;
+	}
+
+	/* SDR0_PExRCSSET shutdown */
+	if ((valPE0 & 0x00000100) ||
+	    (valPE1 & 0x00000100) ||
+	    (valPE2 & 0x00000100)) {
+		printf("PCIE:  SDR0_PExRCSSET shutdown error\n");
+		err = -1;
+	}
+	return err;
+}
+
+/*
+ * Initialize PCI Express core
+ */
+int ppc440spe_init_pcie(void)
+{
+	int time_out = 20;
+
+	/* Set PLL clock receiver to LVPECL */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+	if (check_error())
+		return -1;
+
+	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
+	{
+		printf("PCIE: PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
+		       SDR_READ(PESDR0_PLLLCT2));
+		return -1;
+	}
+	/* De-assert reset of PCIe PLL, wait for lock */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+	udelay(3);
+
+	while(time_out) {
+		if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
+			time_out--;
+			udelay(1);
+		} else
+			break;
+	}
+	if (!time_out) {
+		printf("PCIE: VCO output not locked\n");
+		return -1;
+	}
+	return 0;
+}
+
+int ppc440spe_init_pcie_rootport(int port)
+{
+	static int core_init;
+	volatile u32 val = 0;
+	int attempts;
+
+	if (!core_init) {
+		++core_init;
+		if (ppc440spe_init_pcie())
+			return -1;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a root port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 *
+	 * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
+	 * default setting 0x11310000. The register has new fields,
+	 * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+	 * hang.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET,  1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+		SDR_WRITE(PESDR0_RCSSET,
+			(SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR1_RCSSET,
+			(SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
+		if (!ppc440spe_revB())
+			SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR2_RCSSET,
+			(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+	/*
+	 * Notice: the following delay has critical impact on device
+	 * initialization - if too short (<50ms) the link doesn't get up.
+	 */
+	mdelay(100);
+
+	switch (port) {
+	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
+	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
+	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
+	}
+
+	if (val & (1 << 20)) {
+		printf("PCIE%d: PGRST failed %08x\n", port, val);
+		return -1;
+	}
+
+	/*
+	 * Verify link is up
+	 */
+	val = 0;
+	switch (port)
+	{
+		case 0:
+			val = SDR_READ(PESDR0_LOOP);
+			break;
+		case 1:
+			val = SDR_READ(PESDR1_LOOP);
+			break;
+		case 2:
+			val = SDR_READ(PESDR2_LOOP);
+			break;
+	}
+	if (!(val & 0x00001000)) {
+		printf("PCIE%d: link is not up.\n", port);
+		return -1;
+	}
+
+	/*
+	 * Setup UTL registers - but only on revA!
+	 * We use default settings for revB chip.
+	 */
+	if (!ppc440spe_revB())
+		ppc440spe_setup_utl(port);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *
+	 * NOTICE: revB is very strict about PLB real addressess and ranges to
+	 * be mapped for config space; it seems to only work with d_nnnn_nnnn
+	 * range (hangs the core upon config transaction attempts when set
+	 * otherwise) while revA uses c_nnnn_nnnn.
+	 *
+	 * For revA:
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 *
+	 * For revB:
+	 *     PCIE0: 0xd_0000_0000
+	 *     PCIE1: 0xd_2000_0000
+	 *     PCIE2: 0xd_4000_0000
+	 */
+
+	switch (port) {
+	case 0:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
+		} else {
+			/* revA */
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		if (ppc440spe_revB()) {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
+		} else {
+			mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+			mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		}
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	attempts = 10;
+	switch (port) {
+	case 0:
+		while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE0: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE1: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
+			if (!(attempts--)) {
+				printf("PCIE2: VC0 not active\n");
+				return -1;
+			}
+			mdelay(1000);
+		}
+
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+	mdelay(100);
+
+	return 0;
+}
+
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+{
+	volatile void *mbase = NULL;
+
+	pci_set_ops(hose,
+			pcie_read_config_byte,
+			pcie_read_config_word,
+			pcie_read_config_dword,
+			pcie_write_config_byte,
+			pcie_write_config_word,
+			pcie_write_config_dword);
+
+	switch(port) {
+	case 0:
+		mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+		break;
+	case 1:
+		mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+		break;
+	case 2:
+		mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+		hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+		break;
+	}
+
+	/*
+	 * Set bus numbers on our root port
+	 */
+	if (ppc440spe_revB()) {
+		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+		out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+	} else {
+		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
+	}
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0x00000000);
+	out_le32(mbase + PECFG_POM0LAL, (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  (CFG_PCIE_MEMBASE +
+			port * CFG_PCIE_MEMSIZE));
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+			~(CFG_PCIE_MEMSIZE - 1) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+	out_le32(mbase + PECFG_PIM0LAL, 0);
+	out_le32(mbase + PECFG_PIM0LAH, 0);
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16((u16 *)(mbase + PCI_COMMAND),
+		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+#endif /* CONFIG_PCI */
+#endif /* CONFIG_440SPE */
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
new file mode 100644
index 00000000000..47df7620a6d
--- /dev/null
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <ppc4xx.h>
+#ifndef __440SPE_PCIE_H
+#define __440SPE_PCIE_H
+
+#define mdelay(n) ({unsigned long __ms=(n); while (__ms--) udelay(1000);})
+
+#define DCRN_SDR0_CFGADDR	0x00e
+#define DCRN_SDR0_CFGDATA	0x00f
+
+#define DCRN_PCIE0_BASE		0x100
+#define DCRN_PCIE1_BASE		0x120
+#define DCRN_PCIE2_BASE		0x140
+#define PCIE0			DCRN_PCIE0_BASE
+#define PCIE1			DCRN_PCIE1_BASE
+#define PCIE2			DCRN_PCIE2_BASE
+
+#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
+#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
+#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
+#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
+#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
+#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
+#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
+#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
+#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
+#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
+#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
+#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
+#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
+#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1		0x03a0
+#define PESDR0_PLLLCT2		0x03a1
+#define PESDR0_PLLLCT3		0x03a2
+
+#define PESDR0_UTLSET1		0x0300
+#define PESDR0_UTLSET2		0x0301
+#define PESDR0_DLPSET		0x0302
+#define PESDR0_LOOP		0x0303
+#define PESDR0_RCSSET		0x0304
+#define PESDR0_RCSSTS		0x0305
+#define PESDR0_HSSL0SET1	0x0306
+#define PESDR0_HSSL0SET2	0x0307
+#define PESDR0_HSSL0STS		0x0308
+#define PESDR0_HSSL1SET1	0x0309
+#define PESDR0_HSSL1SET2	0x030a
+#define PESDR0_HSSL1STS		0x030b
+#define PESDR0_HSSL2SET1	0x030c
+#define PESDR0_HSSL2SET2	0x030d
+#define PESDR0_HSSL2STS		0x030e
+#define PESDR0_HSSL3SET1	0x030f
+#define PESDR0_HSSL3SET2	0x0310
+#define PESDR0_HSSL3STS		0x0311
+#define PESDR0_HSSL4SET1	0x0312
+#define PESDR0_HSSL4SET2	0x0313
+#define PESDR0_HSSL4STS		0x0314
+#define PESDR0_HSSL5SET1	0x0315
+#define PESDR0_HSSL5SET2	0x0316
+#define PESDR0_HSSL5STS		0x0317
+#define PESDR0_HSSL6SET1	0x0318
+#define PESDR0_HSSL6SET2	0x0319
+#define PESDR0_HSSL6STS		0x031a
+#define PESDR0_HSSL7SET1	0x031b
+#define PESDR0_HSSL7SET2	0x031c
+#define PESDR0_HSSL7STS		0x031d
+#define PESDR0_HSSCTLSET	0x031e
+#define PESDR0_LANE_ABCD	0x031f
+#define PESDR0_LANE_EFGH	0x0320
+
+#define PESDR1_UTLSET1		0x0340
+#define PESDR1_UTLSET2		0x0341
+#define PESDR1_DLPSET		0x0342
+#define PESDR1_LOOP		0x0343
+#define PESDR1_RCSSET		0x0344
+#define PESDR1_RCSSTS		0x0345
+#define PESDR1_HSSL0SET1	0x0346
+#define PESDR1_HSSL0SET2	0x0347
+#define PESDR1_HSSL0STS		0x0348
+#define PESDR1_HSSL1SET1	0x0349
+#define PESDR1_HSSL1SET2	0x034a
+#define PESDR1_HSSL1STS		0x034b
+#define PESDR1_HSSL2SET1	0x034c
+#define PESDR1_HSSL2SET2	0x034d
+#define PESDR1_HSSL2STS		0x034e
+#define PESDR1_HSSL3SET1	0x034f
+#define PESDR1_HSSL3SET2	0x0350
+#define PESDR1_HSSL3STS		0x0351
+#define PESDR1_HSSCTLSET	0x0352
+#define PESDR1_LANE_ABCD	0x0353
+
+#define PESDR2_UTLSET1		0x0370
+#define PESDR2_UTLSET2		0x0371
+#define PESDR2_DLPSET		0x0372
+#define PESDR2_LOOP		0x0373
+#define PESDR2_RCSSET		0x0374
+#define PESDR2_RCSSTS		0x0375
+#define PESDR2_HSSL0SET1	0x0376
+#define PESDR2_HSSL0SET2	0x0377
+#define PESDR2_HSSL0STS		0x0378
+#define PESDR2_HSSL1SET1	0x0379
+#define PESDR2_HSSL1SET2	0x037a
+#define PESDR2_HSSL1STS		0x037b
+#define PESDR2_HSSL2SET1	0x037c
+#define PESDR2_HSSL2SET2	0x037d
+#define PESDR2_HSSL2STS		0x037e
+#define PESDR2_HSSL3SET1	0x037f
+#define PESDR2_HSSL3SET2	0x0380
+#define PESDR2_HSSL3STS		0x0381
+#define PESDR2_HSSCTLSET	0x0382
+#define PESDR2_LANE_ABCD	0x0383
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBBSZ		0x20
+#define PEUTL_OPDBSZ		0x68
+#define PEUTL_IPHBSZ		0x70
+#define PEUTL_IPDBSZ		0x78
+#define PEUTL_OUTTR		0x90
+#define PEUTL_INTR		0x98
+#define PEUTL_PCTL		0xa0
+#define PEUTL_RCIRQEN		0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA		0x210
+#define PECFG_BAR0HMPA		0x214
+#define PECFG_PIMEN		0x33c
+#define PECFG_PIM0LAL		0x340
+#define PECFG_PIM0LAH		0x344
+#define PECFG_POM0LAL		0x380
+#define PECFG_POM0LAH		0x384
+
+#define SDR_READ(offset) ({\
+	mtdcr(DCRN_SDR0_CFGADDR, offset); \
+	mfdcr(DCRN_SDR0_CFGDATA);})
+
+#define SDR_WRITE(offset, data) ({\
+	mtdcr(DCRN_SDR0_CFGADDR, offset); \
+	mtdcr(DCRN_SDR0_CFGDATA,data);})
+
+int ppc440spe_init_pcie(void);
+int ppc440spe_init_pcie_rootport(int port);
+void yucca_setup_pcie_fpga_rootpoint(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+int yucca_pcie_card_present(int port);
+int pcie_hose_scan(struct pci_controller *hose, int bus);
+#endif /* __440SPE_PCIE_H */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index c5634570054..7d6990f9a87 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -31,7 +31,8 @@ COBJS	= 405gp_pci.o 4xx_enet.o \
 	  bedbug_405.o commproc.o \
 	  cpu.o cpu_init.o i2c.o interrupts.o \
 	  miiphy.o sdram.o serial.o \
-	  spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o
+	  spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \
+	  440spe_pcie.o
 
 OBJS	= $(AOBJS) $(COBJS)
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 71303bcc49f..bc51fbfdbed 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -315,6 +315,17 @@ int checkcpu (void)
 	return 0;
 }
 
+#if defined (CONFIG_440SPE)
+int ppc440spe_revB() {
+	unsigned int pvr;
+
+	pvr = get_pvr();
+	if (pvr == PVR_440SPe_RB)
+		return 1;
+	else
+		return 0;
+}
+#endif
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 699fa7fd752..60ed2d54536 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -315,7 +315,23 @@ rsttlb:	tlbwe	r0,r1,0x0000	/* Invalidate all entries (V=0)*/
 	/*----------------------------------------------------------------*/
 	/* TLB entry setup -- step thru tlbtab */
 	/*----------------------------------------------------------------*/
+#if defined(CONFIG_440SPE)
+	/*----------------------------------------------------------------*/
+	/* We have different TLB tables for revA and rev B of 440SPe */
+	/*----------------------------------------------------------------*/
+	mfspr	r1, PVR
+	lis	r0,0x5342
+	ori	r0,r0,0x1891
+	cmpw	r7,r1,r0
+	bne	r7,..revA
+	bl	tlbtabB
+	b	..goon
+..revA:
+	bl	tlbtabA
+..goon:
+#else
 	bl	tlbtab		/* Get tlbtab pointer */
+#endif
 	mr	r5,r0
 	li	r1,0x003f	/* 64 TLB entries max */
 	mtctr	r1
diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c
index 0e475d47237..687707627e5 100644
--- a/drivers/dm9000x.c
+++ b/drivers/dm9000x.c
@@ -436,6 +436,9 @@ eth_rx(void)
 	u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
 	u16 RxStatus, RxLen = 0;
 	u32 tmplen, i;
+#ifdef CONFIG_DM9000_USE_32BIT
+	u32 tmpdata;
+#endif
 
 	/* Check packet ready or not */
 	DM9000_ior(DM9000_MRCMDX);	/* Dummy read */
diff --git a/include/common.h b/include/common.h
index 9da66b8c275..8000dd01f3a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -252,6 +252,9 @@ void	pciinfo	      (int, int);
 	void	pci_master_init	     (struct pci_controller *);
 #   endif
     int	    is_pci_host		(struct pci_controller *);
+#if defined(CONFIG_440SPE)
+   void pcie_setup_hoses(void);
+#endif
 #endif
 
 int	misc_init_f   (void);
@@ -474,6 +477,7 @@ void   get_sys_info  ( sys_info_t * );
 #	if defined(CONFIG_440SPE)
 	 unsigned long determine_sysper(void);
 	 unsigned long determine_pci_clock_per(void);
+	 int ppc440spe_revB(void);
 #	endif
 #  else
     typedef PPC405_SYS_INFO sys_info_t;
@@ -611,7 +615,7 @@ void	show_boot_progress (int status);
 #endif
 
 #ifdef CONFIG_INIT_CRITICAL
-#error CONFIG_INIT_CRITICAL is depracted!
+#error CONFIG_INIT_CRITICAL is deprecated!
 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
 #endif
 
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index be83b676720..31e3eed68c7 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,8 @@
 #define CONFIG_TQM5200		1	/* ... on TQM5200 module		*/
 #undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules	*/
 
-#ifndef CONFIG_CAM5200			/* On a Cameron board or ...		*/
+/* On a Cameron or on a FO300 board or ...				*/
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
 #define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
 #endif
 
@@ -58,6 +59,20 @@
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
+#ifdef CONFIG_FO300
+#define CFG_DEVICE_NULLDEV		1	/* enable null device */
+#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* used to detect S1 switch position */
+
+#if 0
+#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED	1	/* silent console on PSC1 when S1 */
+							/* switch is closed */
+#endif
+
+#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED		/* silent console on PSC1 when S1 */
+							/* switch is open */
+#endif	/* CONFIG_FO300 */
+
 #ifdef CONFIG_STK52XX
 #define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
 #define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
@@ -105,12 +120,18 @@
 #define CONFIG_VIDEO_SM501_32BPP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#ifndef CONFIG_FO300
 #define CONFIG_CONSOLE_EXTRA_INFO
+#else
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 #define CFG_CONSOLE_IS_IN_ENV
-#endif
+#endif /* #ifndef CONFIG_TQM5200S */
 
 #ifdef CONFIG_VIDEO
 #define ADD_BMP_CMD		CFG_CMD_BMP
@@ -124,7 +145,7 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI
 #define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
@@ -148,7 +169,7 @@
 #endif
 
 /* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
+#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
 #else
 #define ADD_IDE_CMD		0
@@ -224,6 +245,12 @@
 		"erase FC000000 FC03FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
 		"protect on FC000000 FC03FFFF\0"
+#elif defined (CONFIG_FO300)
+#   define ENV_UPDT							\
+	"update=protect off FC000000 FC05FFFF;"				\
+		"erase FC000000 FC05FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC05FFFF\0"
 #else
 # error "Unknown Carrier Board"
 #endif	/* CONFIG_STK52XX */
@@ -378,6 +405,13 @@
 						"2m(initrd),"		\
 						"8m(misc),"		\
 						"16m(big-fs)"
+#elif defined (CONFIG_FO300)
+#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+						"1408k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"8m(misc),"		\
+						"16m(big-fs)"
 #else
 # error "Unknown Carrier Board"
 #endif	/* CONFIG_STK52XX */
@@ -450,15 +484,18 @@
  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
  *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
  *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- *	      Use for REV200 STK52XX boards. Do not use with REV100 modules
- *	      (because, there I2C1 is used as I2C bus)
+ *	      Use for REV200 STK52XX boards and FO300 boards. Do not use
+ *	      with REV100 modules (because, there I2C1 is used as I2C bus)
  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
  * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
  *	000 -> All PSC2 pins are GIOPs
  *	001 -> CAN1/2 on PSC2 pins
  *	       Use for REV100 STK52xx boards
+ *	01x -> Use AC97
+ * use PSC3: Bits 20-23 (mask: 0x00000f00)
+ *	1100 -> UART/SPI (on FO300 board)
  * use PSC6:
- *   on STK52xx:
+ *   on STK52xx and FO300:
  *	use as UART. Pins PSC6_0 to PSC6_3 are used.
  *	Bits 9:11 (mask: 0x00700000):
  *	   101 -> PSC6 : Extended POST test is not available
@@ -480,6 +517,8 @@
 #   define CFG_GPS_PORT_CONFIG	0x91500004
 #  endif
 # endif
+#elif defined (CONFIG_FO300)
+# define CFG_GPS_PORT_CONFIG	0x91502c24
 #else  /* TMQ5200 Inbetriebnahme-Board */
 # define CFG_GPS_PORT_CONFIG	0x81000004
 #endif
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index cec7e3ece44..92c7016e6bc 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -422,9 +422,9 @@ extern int tqm834x_num_flash_banks;
 #define CFG_SICRL	SICRL_LDP_A
 
 /* i-cache and d-cache disabled */
-#define CFG_HID0_INIT		0x000000000
-#define CFG_HID0_FINAL		CFG_HID0_INIT
-#define CFG_HID2		0x000000000
+#define CFG_HID0_INIT	0x000000000
+#define CFG_HID0_FINAL	CFG_HID0_INIT
+#define CFG_HID2	HID2_HBE
 
 /* DDR 0 - 512M */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -437,12 +437,21 @@ extern int tqm834x_num_flash_banks;
 #define CFG_IBAT2U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
 /* PCI */
-#define CFG_IBAT3L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#ifdef CONFIG_PCI
+#define CFG_IBAT3L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT3U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L	(CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4L	(CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT4U	(CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 #define CFG_IBAT5L	(CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CFG_IBAT5U	(CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L	(0)
+#define CFG_IBAT3U	(0)
+#define CFG_IBAT4L	(0)
+#define CFG_IBAT4U	(0)
+#define CFG_IBAT5L	(0)
+#define CFG_IBAT5U	(0)
+#endif
 
 /* IMMRBAR */
 #define CFG_IBAT6L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 780f27433e6..bc3b9aa1d0a 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -424,7 +424,7 @@
 #define CONFIG_BOOTDELAY 5		/* -1 disables auto-boot	*/
 
 #define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
@@ -449,7 +449,7 @@
 		"run nfsargs addip addcons;bootm\0"			\
 	"rootpath=/opt/eldk/ppc_85xx\0"					\
 	"kernel_addr=FE000000\0"					\
-	"ramdisk_addr=FE100000\0"					\
+	"ramdisk_addr=FE180000\0"					\
 	"load=tftp 100000 /tftpboot/$hostname/u-boot.bin\0"		\
 	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
 		"cp.b 100000 fffc0000 40000;"			        \
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 2c1c31927c1..cd4339b5822 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -310,11 +310,11 @@
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				CFG_CMD_ASKENV	| \
-				CFG_CMD_EEPROM	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -358,13 +358,11 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_CMDLINE_EDITING
-
-#ifdef CONFIG_CMDLINE_EDITING
-#undef CONFIG_AUTO_COMPLETE
-#else
-#define CONFIG_AUTO_COMPLETE
-#endif
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h
index 4a79835d6ac..a66cdc39567 100644
--- a/include/configs/bubinga.h
+++ b/include/configs/bubinga.h
@@ -200,8 +200,9 @@
 
 #define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index a26af6952ef..d8882ea31c5 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -143,7 +143,13 @@
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -205,6 +211,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -243,8 +250,9 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 0335a009858..0350e91f0fb 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -145,6 +145,13 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
@@ -215,6 +222,7 @@
 				CFG_CMD_DHCP		|	\
 				CFG_CMD_DIAG		|	\
 				CFG_CMD_ELF		|	\
+				CFG_CMD_EEPROM		|	\
 				CFG_CMD_I2C		|	\
 				CFG_CMD_IRQ		|	\
 				CFG_CMD_MII		|	\
@@ -253,6 +261,12 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index ce33b85c96d..563f7978d5f 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -51,15 +51,20 @@
  *  To select console on the one of 8 external UARTs,
  * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
  * or as 5, 6, 7, or 8 for the second Quad UART.
+ * COM11, COM12, COM13, COM14 are located on the second Quad UART.
  *
  *  CONFIG_PSC_CONSOLE must be undefined in this case.
  */
-/* #define CONFIG_QUART_CONSOLE	1	*/ /* console is on UART1 of QUART1	*/
+#ifdef CONFIG_CONSOLE_COM12
+#define CONFIG_QUART_CONSOLE	6	/* console is on UARTF of QUART2	*/
+#else
+#define CONFIG_QUART_CONSOLE	8	/* console is on UARTH of QUART2	*/
+#endif
 /*
  *  To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
  * and undefine CONFIG_QUART_CONSOLE.
  */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
+/*#define CONFIG_PSC_CONSOLE	1	*/ /* console is on PSC1		*/
 #if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
 #error "Select only one console device!"
 #endif
diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h
index a13d6a870ab..89e9164e036 100644
--- a/include/configs/ocotea.h
+++ b/include/configs/ocotea.h
@@ -158,7 +158,13 @@
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -219,6 +225,9 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_PHY_RESET        1       /* reset phy upon startup         */
 #define CONFIG_PHY_RESET_DELAY	1000
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				CFG_CMD_ASKENV	| \
@@ -226,6 +235,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -264,15 +274,12 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
-
-#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index 1171ee5ae51..28abd6e1533 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -90,6 +90,11 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
 
+#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
+
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Walnut	*/
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
@@ -97,6 +102,7 @@
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
@@ -156,16 +162,12 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support	*/
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define CONFIG_LOOPW		1	/* enable loopw command		*/
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
-
-#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
-#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
-
 /*-----------------------------------------------------------------------
  * I2C stuff
  *-----------------------------------------------------------------------
@@ -175,6 +177,13 @@
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index 7d555665ec8..cf42b666b00 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -229,6 +229,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -265,6 +266,12 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index a81cf34f11d..86a85b8a6d3 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -231,6 +231,7 @@
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
 				CFG_CMD_MII	| \
@@ -272,6 +273,12 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 0e58e7e1024..a6532b5e853 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -31,9 +31,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG
-#undef DEBUG
-
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
@@ -63,17 +60,20 @@
 #define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
 #define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
 
-#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE1	0x90000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE2	0xa0000000	/* mapped pci memory	*/
-#define CFG_PCI_MEMBASE3	0xb0000000	/* mapped pci memory	*/
-
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
 #define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
-#define CFG_PCI_TARGBASE	0x80000000	/*PCIaddr mapped to CFG_PCI_MEMBASE*/
+#define CFG_PCI_TARGBASE	CFG_PCI_MEMBASE
+
+#define CFG_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
+#define CFG_PCIE_MEMSIZE	0x01000000
+#define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
-/* #define CFG_PCI_BASE_IO	0xB8000000 */	/* internal PCI I-O	*/
-/* #define CFG_PCI_BASE_REGS	0xBEC00000 */	/* internal PCI regs	*/
-/* #define CFG_PCI_BASE_CYCLE	0xBED00000 */	/* internal PCI regs	*/
+#define CFG_PCIE0_CFGBASE	0xc0000000
+#define CFG_PCIE0_XCFGBASE	0xc0000400
+#define CFG_PCIE1_CFGBASE	0xc0001000
+#define CFG_PCIE1_XCFGBASE	0xc0001400
+#define CFG_PCIE2_CFGBASE	0xc0002000
+#define CFG_PCIE2_XCFGBASE	0xc0002400
 
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
@@ -220,6 +220,9 @@
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
 
+#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
+#define CONFIG_NET_MULTI		/* needed for NetConsole	*/
+
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 /*
@@ -245,6 +248,12 @@
 
 #define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
@@ -292,6 +301,7 @@
  */
 /* Support for Intel 82557/82559/82559ER chips. */
 #define CONFIG_EEPRO100
+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
@@ -506,8 +516,8 @@
 #define FPGA_REG1C_PE1_WAKE		0x0040
 #define FPGA_REG1C_PE2_WAKE		0x0020
 #define FPGA_REG1C_PE0_PERST		0x0010
-#define FPGA_REG1C_PE1_PERST		0x0080
-#define FPGA_REG1C_PE2_PERST		0x0040
+#define FPGA_REG1C_PE1_PERST		0x0008
+#define FPGA_REG1C_PE2_PERST		0x0004
 
 /*----------------------------------------------------------------------------+
 | Defines
diff --git a/include/fat.h b/include/fat.h
index 0645458f17b..92638d535e4 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -175,15 +175,19 @@ typedef struct dir_slot {
 	__u8    name11_12[4];	/* Last 2 characters in name */
 } dir_slot;
 
-/* Private filesystem parameters */
+/* Private filesystem parameters
+ *
+ * Note: FAT buffer has to be 32 bit aligned
+ * (see FAT32 accesses)
+ */
 typedef struct {
+	__u8	fatbuf[FATBUFSIZE]; /* Current FAT buffer */
 	int	fatsize;	/* Size of FAT in bits */
 	__u16	fatlength;	/* Length of FAT in sectors */
 	__u16	fat_sect;	/* Starting sector of the FAT */
 	__u16	rootdir_sect;	/* Start sector of root directory */
 	__u16	clust_size;	/* Size of clusters in sectors */
 	short	data_begin;	/* The sector of the first cluster, can be negative */
-	__u8	fatbuf[FATBUFSIZE]; /* Current FAT buffer */
 	int	fatbufnum;	/* Used by get_fatent, init to -1 */
 } fsdata;
 
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 50a6ac1e98d..daa4d5f6d4c 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -235,20 +235,30 @@
 /* General Purpose Timers registers */
 #define MPC5XXX_GPT0_ENABLE		(MPC5XXX_GPT + 0x0)
 #define MPC5XXX_GPT0_COUNTER		(MPC5XXX_GPT + 0x4)
+#define MPC5XXX_GPT0_STATUS		(MPC5XXX_GPT + 0x0C)
 #define MPC5XXX_GPT1_ENABLE		(MPC5XXX_GPT + 0x10)
 #define MPC5XXX_GPT1_COUNTER		(MPC5XXX_GPT + 0x14)
+#define MPC5XXX_GPT1_STATUS		(MPC5XXX_GPT + 0x1C)
 #define MPC5XXX_GPT2_ENABLE		(MPC5XXX_GPT + 0x20)
 #define MPC5XXX_GPT2_COUNTER		(MPC5XXX_GPT + 0x24)
+#define MPC5XXX_GPT2_STATUS		(MPC5XXX_GPT + 0x2C)
 #define MPC5XXX_GPT3_ENABLE		(MPC5XXX_GPT + 0x30)
 #define MPC5XXX_GPT3_COUNTER		(MPC5XXX_GPT + 0x34)
+#define MPC5XXX_GPT3_STATUS		(MPC5XXX_GPT + 0x3C)
 #define MPC5XXX_GPT4_ENABLE		(MPC5XXX_GPT + 0x40)
 #define MPC5XXX_GPT4_COUNTER		(MPC5XXX_GPT + 0x44)
+#define MPC5XXX_GPT4_STATUS		(MPC5XXX_GPT + 0x4C)
 #define MPC5XXX_GPT5_ENABLE		(MPC5XXX_GPT + 0x50)
+#define MPC5XXX_GPT5_STATUS		(MPC5XXX_GPT + 0x5C)
 #define MPC5XXX_GPT5_COUNTER		(MPC5XXX_GPT + 0x54)
 #define MPC5XXX_GPT6_ENABLE		(MPC5XXX_GPT + 0x60)
 #define MPC5XXX_GPT6_COUNTER		(MPC5XXX_GPT + 0x64)
+#define MPC5XXX_GPT6_STATUS		(MPC5XXX_GPT + 0x6C)
 #define MPC5XXX_GPT7_ENABLE		(MPC5XXX_GPT + 0x70)
 #define MPC5XXX_GPT7_COUNTER		(MPC5XXX_GPT + 0x74)
+#define MPC5XXX_GPT7_STATUS		(MPC5XXX_GPT + 0x7C)
+
+#define MPC5XXX_GPT_GPIO_PIN(status)	((0x00000100 & (status)) >> 8)
 
 #define MPC5XXX_GPT7_PWMCFG		(MPC5XXX_GPT + 0x78)
 
diff --git a/net/tftp.c b/net/tftp.c
index eca21d294eb..f3a54714838 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -225,7 +225,7 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
 		if (TftpBlock == 0) {
 			TftpBlockWrap++;
 			TftpBlockWrapOffset += TFTP_BLOCK_SIZE * TFTP_SEQUENCE_SIZE;
-			printf ("\n\t %lu MB reveived\n\t ", TftpBlockWrapOffset>>20);
+			printf ("\n\t %lu MB received\n\t ", TftpBlockWrapOffset>>20);
 		} else {
 			if (((TftpBlock - 1) % 10) == 0) {
 				putc ('#');