* Patch by Rune Torgersen, 17 Sep 2003:

  - Fixes for MPC8266 default config
  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's

5 files changed, 95 insertions, 57 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 7c236b56c30..df90bd862b9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -4,6 +4,7 @@ Changes for U-Boot 1.0.0:
 
 * Patch by Rune Torgersen, 17 Sep 2003:
   - Fixes for MPC8266 default config
+  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
 
 * Patches by Jon Diekema, 17 Sep 2003:
   - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
diff --git a/board/mpc8266ads/mpc8266ads.c b/board/mpc8266ads/mpc8266ads.c
index fd11162960c..68a59a680c1 100644
--- a/board/mpc8266ads/mpc8266ads.c
+++ b/board/mpc8266ads/mpc8266ads.c
@@ -427,7 +427,7 @@ long int initdram(int board_type)
     bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
     sda10 = sdam + 2;
 #else
-    sdam = cols - 6;
+    sdam = cols + banks - 8;
     bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
     sda10 = sdam;
 #endif
@@ -557,9 +557,18 @@ long int initdram(int board_type)
 	printf("SDRAM configuration read from SPD\n");
 	printf("\tSize per side = %dMB\n", sdram_size >> 20);
 	printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
-	printf("\tRefresh rate = %d, CAS latency = %d\n", psrt, caslatency);
+	printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
+#if(CONFIG_PBI == 0)	/* bank-based interleaving */
+    printf(", Using Bank Based Interleave\n");
+#else
+    printf(", Using Page Based Interleave\n");
+#endif    
 	printf("\tTotal size: ");
 
+    /* this delay only needed for original 16MB DIMM... 
+     * Not needed for any other memory configuration */
+    if ((sdram_size * chipselects) == (16 *1024 *1024))
+        udelay (250000);
     return (sdram_size * chipselects);
 	/*return (16 * 1024 * 1024);*/
 }
@@ -575,3 +584,4 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
index 45dca732035..76645f3e02f 100644
--- a/cpu/mpc8260/ether_fcc.c
+++ b/cpu/mpc8260/ether_fcc.c
@@ -652,6 +652,15 @@ eth_loopback_test (void)
 #if defined(CONFIG_HYMOD)
 	/*
 	 * Attention: this is board-specific
+	 * 0, FCC1 
+	 * 1, FCC2 
+	 * 2, FCC3 
+         */
+#       define FCC_START_LOOP 0
+#       define FCC_END_LOOP   2
+
+	/*
+	 * Attention: this is board-specific
 	 * - FCC1 Rx-CLK is CLK10
 	 * - FCC1 Tx-CLK is CLK11
 	 * - FCC2 Rx-CLK is CLK13
@@ -665,13 +674,30 @@ eth_loopback_test (void)
 	immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
 	    CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
 	    CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
+#elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng)
+	/*
+	 * Attention: this is board-specific
+	 * 1, FCC2 
+         */
+#       define FCC_START_LOOP 1
+#       define FCC_END_LOOP   1
+
+	/*
+	 * Attention: this is board-specific
+	 * - FCC2 Rx-CLK is CLK13
+	 * - FCC2 Tx-CLK is CLK14
+	 */
+
+	/* 28.9 - (3): connect FCC's tx and rx clocks */
+	immr->im_cpmux.cmx_uar = 0;
+	immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14;
 #else
 #error "eth_loopback_test not supported on your board"
 #endif
 
 	puts ("Initialise FCC channels:");
 
-	for (c = 0; c < 3; c++) {
+	for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
 		elbt_chan *ecp = &elbt_chans[c];
 		volatile fcc_t *fcp = &immr->im_fcc[c];
 		volatile fcc_enet_t *fpp;
@@ -853,7 +879,7 @@ eth_loopback_test (void)
 	do {
 		nclosed = 0;
 
-		for (c = 0; c < 3; c++) {
+		for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
 			volatile fcc_t *fcp = &immr->im_fcc[c];
 			elbt_chan *ecp = &elbt_chans[c];
 			int i;
@@ -1082,7 +1108,7 @@ eth_loopback_test (void)
 			}
 		}
 
-	} while (nclosed < 3);
+	} while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1));
 
 	runtime = get_timer (runtime);
 	if (runtime <= ELBT_CLSWAIT) {
@@ -1099,7 +1125,7 @@ eth_loopback_test (void)
 	 * now print stats
 	 */
 
-	for (c = 0; c < 3; c++) {
+	for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
 		elbt_chan *ecp = &elbt_chans[c];
 		uint rxpps, txpps, nerr;
 
@@ -1131,17 +1157,17 @@ eth_loopback_test (void)
 	}
 
 	puts ("Receive Error Counts:\n");
-	for (c = 0; c < 3; c++)
+	for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
 		bases[c] = (uchar *)&elbt_chans[c].rxeacc;
 	print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
 
 	puts ("\nTransmit Error Counts:\n");
-	for (c = 0; c < 3; c++)
+	for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
 		bases[c] = (uchar *)&elbt_chans[c].txeacc;
 	print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
 
 	puts ("\nRMON(-like) Counters:\n");
-	for (c = 0; c < 3; c++)
+	for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
 		bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
 	print_desc (epram_descs, epram_ndesc, bases, 3);
 }
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 8501b2b4d9b..26c13068ef5 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -508,7 +508,8 @@
 #define CFG_MPTPR		0x00001900
 #define CFG_PSRT		0x00000021
 
-#define CFG_RESET_ADDRESS	0x04400000
+/* This address must not exist */
+#define CFG_RESET_ADDRESS	0xFCFFFF00
 
 /* PCI Memory map (if different from default map */
 #define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
diff --git a/include/miiphy.h b/include/miiphy.h
index 5122b098f2d..050db9ab57d 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -1,38 +1,38 @@
 /*----------------------------------------------------------------------------+
 |
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
+|	This source code has been made available to you by IBM on an AS-IS
+|	basis.	Anyone receiving this source is licensed under IBM
+|	copyrights to use it in any way he or she deems fit, including
+|	copying it, modifying it, compiling it, and redistributing it either
+|	with or without modifications.	No license under IBM patents or
+|	patent applications is to be implied by the copyright license.
 |
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
+|	Any user of this software should understand that IBM cannot provide
+|	technical support for this software and will not be responsible for
+|	any consequences resulting from the use of this software.
 |
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
+|	Any person who transfers this source code or any derivative work
+|	must include the IBM copyright notice, this paragraph, and the
+|	preceding two paragraphs in the transferred software.
 |
-|       COPYRIGHT   I B M   CORPORATION 1999
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+|	COPYRIGHT   I B M   CORPORATION 1999
+|	LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
 +----------------------------------------------------------------------------*/
 /*----------------------------------------------------------------------------+
 |
-|  File Name:   miiphy.h
+|  File Name:	miiphy.h
 |
-|  Function:    Include file defining PHY registers.
+|  Function:	Include file defining PHY registers.
 |
-|  Author:      Mark Wisner
+|  Author:	Mark Wisner
 |
 |  Change Activity-
 |
-|  Date        Description of Change                                       BY
-|  ---------   ---------------------                                       ---
-|  04-May-99   Created                                                     MKW
-|  07-Jul-99   Added full duplex support                                   MKW
-|  08-Sep-01   Tweaks                                                      gvb
+|  Date	       Description of Change					BY
+|  ---------   ---------------------					---
+|  04-May-99   Created							MKW
+|  07-Jul-99   Added full duplex support				MKW
+|  08-Sep-01   Tweaks							gvb
 |
 +----------------------------------------------------------------------------*/
 #ifndef _miiphy_h_
@@ -49,35 +49,35 @@ int  miiphy_duplex(unsigned char addr);
 
 
 /* phy seed setup */
-#define AUTO     99
-#define _100BASET 100
-#define _10BASET  10
-#define HALF   22
-#define FULL   44
+#define AUTO			99
+#define _100BASET		100
+#define _10BASET		10
+#define HALF			22
+#define FULL			44
 
 /* phy register offsets */
-#define PHY_BMCR 		0x00
+#define PHY_BMCR		0x00
 #define PHY_BMSR		0x01
-#define PHY_PHYIDR1 	0x02
-#define PHY_PHYIDR2	0x03
+#define PHY_PHYIDR1		0x02
+#define PHY_PHYIDR2		0x03
 #define PHY_ANAR		0x04
-#define PHY_ANLPAR	0x05
+#define PHY_ANLPAR		0x05
 #define PHY_ANER		0x06
-#define PHY_ANNPTR	0x07
-#define PHY_PHYSTS	0x10
-#define PHY_MIPSCR	0x11
-#define PHY_MIPGSR	0x12
-#define PHY_DCR		0x13
+#define PHY_ANNPTR		0x07
+#define PHY_PHYSTS		0x10
+#define PHY_MIPSCR		0x11
+#define PHY_MIPGSR		0x12
+#define PHY_DCR			0x13
 #define PHY_FCSCR		0x14
 #define PHY_RECR		0x15
 #define PHY_PCSR		0x16
-#define PHY_LBR		0x17
-#define PHY_10BTSCR	0x18
-#define PHY_PHYCTRL	0x19
+#define PHY_LBR			0x17
+#define PHY_10BTSCR		0x18
+#define PHY_PHYCTRL		0x19
 
 /* PHY BMCR */
-#define PHY_BMCR_RESET  	0x8000
-#define PHY_BMCR_LOOP  	 	0x4000
+#define PHY_BMCR_RESET		0x8000
+#define PHY_BMCR_LOOP		0x4000
 #define PHY_BMCR_100MB		0x2000
 #define PHY_BMCR_AUTON		0x1000
 #define PHY_BMCR_POWD		0x0800
@@ -103,11 +103,11 @@ int  miiphy_duplex(unsigned char addr);
 /*phy ANLPAR */
 #define PHY_ANLPAR_NP		0x8000
 #define PHY_ANLPAR_ACK		0x4000
-#define PHY_ANLPAR_RF         0x2000
-#define PHY_ANLPAR_T4         0x0200
-#define PHY_ANLPAR_TXFD       0x0100
-#define PHY_ANLPAR_TX         0x0080
+#define PHY_ANLPAR_RF		0x2000
+#define PHY_ANLPAR_T4		0x0200
+#define PHY_ANLPAR_TXFD		0x0100
+#define PHY_ANLPAR_TX		0x0080
 #define PHY_ANLPAR_10FD		0x0040
-#define PHY_ANLPAR_10         0x0020
-#define PHY_ANLPAR_100        0x0380        /* we can run at 100 */
+#define PHY_ANLPAR_10		0x0020
+#define PHY_ANLPAR_100		0x0380	    /* we can run at 100 */
 #endif