logodl: remove code for yet another corpse

The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: August Hoeraendl <august.hoerandl@gmx.at>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

8 files changed, 1 insertions, 1771 deletions

diff --git a/CREDITS b/CREDITS
index 4f3cdbb2317..d6810189b60 100644
--- a/CREDITS
+++ b/CREDITS
@@ -200,10 +200,6 @@ N: Andreas Heppel
 E: aheppel@sysgo.de
 D: CPU Support for MPC 75x; board support for Eltec BAB750 [obsolete!]
 
-N: August Hoeraendl
-E: august.hoerandl@gmx.at
-D: Support for the logodl board (PXA2xx)
-
 N: Josh Huber
 E: huber@alum.wpi.edu
 D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series.
@@ -441,7 +437,7 @@ D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR)
 
 N: Robert Schwebel
 E: r.schwebel@pengutronix.de
-D: Support for csb226, logodl and innokom boards (PXA2xx)
+D: Support for csb226 and innokom boards (PXA2xx)
 
 N: Aaron Sells
 E: sellsa@embeddedplanet.com
diff --git a/board/logodl/Makefile b/board/logodl/Makefile
deleted file mode 100644
index 0795b6b2af8..00000000000
--- a/board/logodl/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= logodl.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/logodl/config.mk b/board/logodl/config.mk
deleted file mode 100644
index 76c382d57cf..00000000000
--- a/board/logodl/config.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c170'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-#TEXT_BASE = 0
-
-# FIXME: armboot does only work correctly when being compiled
-# # for the addresses _after_ relocation to RAM!! Otherwhise the
-# # .bss segment is assumed in flash...
-#
-TEXT_BASE = 0x083E0000
diff --git a/board/logodl/flash.c b/board/logodl/flash.c
deleted file mode 100644
index 593943ffda8..00000000000
--- a/board/logodl/flash.c
+++ /dev/null
@@ -1,829 +0,0 @@
-/*
- * (C) 2000 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x1000000
-#define MAIN_SECT_SIZE  0x20000		/* 2x64k = 128k per sector */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- *        has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFFFFFF
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-#define write_word(in, de, da)   write_word_amd(in, de, da)
-static void flash_get_offsets(ulong base, flash_info_t *info);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t *info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong flash_init(void)
-{
-    int i, j;
-    ulong size = 0;
-
-    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
-    {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (FLASH_MAN_AMD & FLASH_VENDMASK) |
-	  (FLASH_AM640U & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-	switch (i)
-	{
-	   case 0:
-		flashbase = PHYS_FLASH_1;
-		break;
-	   case 1:
-		flashbase = PHYS_FLASH_2;
-		break;
-	   default:
-		panic("configured too many flash banks!\n");
-		break;
-	}
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
-	    flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-	}
-	size += flash_info[i].size;
-    }
-
-    /* Protect monitor and environment sectors
-     */
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_SYS_FLASH_BASE,
-		  CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
-		  &flash_info[0]);
-
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_ENV_ADDR,
-		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		  &flash_info[0]);
-
-    return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
-	    && (info->flash_id & FLASH_BTYPE)) {
-		int bootsect_size;	/* number of bytes/boot sector	*/
-		int sect_size;		/* number of bytes/regular sector */
-
-		bootsect_size = 0x00002000 * (sizeof(FPW)/2);
-		sect_size =     0x00010000 * (sizeof(FPW)/2);
-
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < 8; ++i) {
-			info->start[i] = base + (i * bootsect_size);
-		}
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i - 7) * sect_size);
-		}
-	}
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
-		 && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
-		int sect_size;		/* number of bytes/sector */
-
-		sect_size = 0x00010000 * (sizeof(FPW)/2);
-
-		/* set up sector start address table (uniform sector type) */
-		for( i = 0; i < info->sector_count; i++ )
-			info->start[i] = base + (i * sect_size);
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	uchar *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM640U:
-		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
-		break;
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-		fmt = "28F800C3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL800B:
-	case FLASH_INTEL800T:
-		fmt = "28F800B3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-		fmt = "28F160C3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL160B:
-	case FLASH_INTEL160T:
-		fmt = "28F160B3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-		fmt = "28F320C3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL320B:
-	case FLASH_INTEL320T:
-		fmt = "28F320B3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		fmt = "28F640C3%s (64 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL640B:
-	case FLASH_INTEL640T:
-		fmt = "28F640B3%s (64 Mbit, %s)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	/* Write auto select command: read Manufacturer ID */
-
-	/* Write auto select command sequence and test FLASH answer */
-	addr[0x0555] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[0x02AA] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[0x0555] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch (addr[1]) {
-
-	case (FPW)AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
-		info->flash_id += FLASH_AM640U;
-		info->sector_count = 128;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	case (FPW)INTEL_ID_28F800C3B:
-		info->flash_id += FLASH_28F800C3B;
-		info->sector_count = 23;
-		info->size = 0x00100000 * (sizeof(FPW)/2);
-		break;				/* => 1 or 2 MB		*/
-
-	case (FPW)INTEL_ID_28F800B3B:
-		info->flash_id += FLASH_INTEL800B;
-		info->sector_count = 23;
-		info->size = 0x00100000 * (sizeof(FPW)/2);
-		break;				/* => 1 or 2 MB		*/
-
-	case (FPW)INTEL_ID_28F160C3B:
-		info->flash_id += FLASH_28F160C3B;
-		info->sector_count = 39;
-		info->size = 0x00200000 * (sizeof(FPW)/2);
-		break;				/* => 2 or 4 MB		*/
-
-	case (FPW)INTEL_ID_28F160B3B:
-		info->flash_id += FLASH_INTEL160B;
-		info->sector_count = 39;
-		info->size = 0x00200000 * (sizeof(FPW)/2);
-		break;				/* => 2 or 4 MB		*/
-
-	case (FPW)INTEL_ID_28F320C3B:
-		info->flash_id += FLASH_28F320C3B;
-		info->sector_count = 71;
-		info->size = 0x00400000 * (sizeof(FPW)/2);
-		break;				/* => 4 or 8 MB		*/
-
-	case (FPW)INTEL_ID_28F320B3B:
-		info->flash_id += FLASH_INTEL320B;
-		info->sector_count = 71;
-		info->size = 0x00400000 * (sizeof(FPW)/2);
-		break;				/* => 4 or 8 MB		*/
-
-	case (FPW)INTEL_ID_28F640C3B:
-		info->flash_id += FLASH_28F640C3B;
-		info->sector_count = 135;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	case (FPW)INTEL_ID_28F640B3B:
-		info->flash_id += FLASH_INTEL640B;
-		info->sector_count = 135;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	flash_get_offsets((ulong)addr, info);
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void flash_sync_real_protect(flash_info_t *info)
-{
-    FPWV *addr = (FPWV *)(info->start[0]);
-    FPWV *sect;
-    int i;
-
-    switch (info->flash_id & FLASH_TYPEMASK) {
-    case FLASH_28F800C3B:
-    case FLASH_28F800C3T:
-    case FLASH_28F160C3B:
-    case FLASH_28F160C3T:
-    case FLASH_28F320C3B:
-    case FLASH_28F320C3T:
-    case FLASH_28F640C3B:
-    case FLASH_28F640C3T:
-	/* check for protected sectors */
-	*addr = (FPW)0x00900090;
-	for (i = 0; i < info->sector_count; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02.
-	     * D0 = 1 for each device if protected.
-	     * If at least one device is protected the sector is marked
-	     * protected, but mixed protected and  unprotected devices
-	     * within a sector should never happen.
-	     */
-	    sect = (FPWV *)(info->start[i]);
-	    info->protect[i] = (sect[2] & (FPW)(0x00010001)) ? 1 : 0;
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-	break;
-
-    case FLASH_AM640U:
-    default:
-	/* no hardware protect that we support */
-	break;
-    }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_INTEL800B:
-	case FLASH_INTEL160B:
-	case FLASH_INTEL320B:
-	case FLASH_INTEL640B:
-	case FLASH_28F800C3B:
-	case FLASH_28F160C3B:
-	case FLASH_28F320C3B:
-	case FLASH_28F640C3B:
-	case FLASH_AM640U:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer(0);
-	last  = start;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW)0x00550055;	/* unlock */
-			base[0x0555] = (FPW)0x00800080;	/* erase mode */
-			base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				putc ('.');
-				last = now;
-			}
-		}
-
-		flash_reset(info);	/* reset to read mode	*/
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int bad_write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-    int bytes;	  /* number of bytes to program in current word		*/
-    int left;	  /* number of bytes left to program			*/
-    int i, res;
-
-    for (left = cnt, res = 0;
-	 left > 0 && res == 0;
-	 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-	bytes = addr & (sizeof(data) - 1);
-	addr &= ~(sizeof(data) - 1);
-
-	/* combine source and destination data so can program
-	 * an entire word of 16 or 32 bits
-	 */
-	for (i = 0; i < sizeof(data); i++) {
-	    data <<= 8;
-	    if (i < bytes || i - bytes >= left )
-		data += *((uchar *)addr + i);
-	    else
-		data += *src++;
-	}
-
-	/* write one word to the flash */
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		res = write_word_amd(info, (FPWV *)addr, data);
-		break;
-	case FLASH_MAN_INTEL:
-		res = write_word_intel(info, (FPWV *)addr, data);
-		break;
-	default:
-		/* unknown flash type, error! */
-		printf ("missing or unknown FLASH type\n");
-		res = 1;	/* not really a timeout, but gives error */
-		break;
-	}
-    }
-
-    return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr:	where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-		for (; i<2 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		/* data = *((vushort*)src); */
-		data = *((FPW*)src);
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += sizeof(FPW);
-		wp  += sizeof(FPW);
-		cnt -= sizeof(FPW);
-	}
-
-	if (cnt == 0) return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i<2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 8);
-	}
-
-	return write_word(info, wp, data);
-}
-
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-    ulong start;
-    int flag;
-    int res = 0;	/* result, assume success	*/
-    FPWV *base;		/* first address in flash bank	*/
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-
-    base = (FPWV *)(info->start[0]);
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-    base[0x02AA] = (FPW)0x00550055;	/* unlock */
-    base[0x0555] = (FPW)0x00A000A0;	/* selects program mode */
-
-    *dest = data;		/* start programming the data	*/
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    start = get_timer (0);
-
-    /* data polling for D7 */
-    while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    *dest = (FPW)0x00F000F0;	/* reset bank */
-	    res = 1;
-	}
-    }
-
-    return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
-{
-    ulong start;
-    int flag;
-    int res = 0;	/* result, assume success	*/
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    *dest = (FPW)0x00500050;	/* clear status register	*/
-    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
-    *dest = (FPW)0x00400040;	/* program setup		*/
-
-    *dest = data;		/* start programming the data	*/
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    start = get_timer (0);
-
-    while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
-	    res = 1;
-	}
-    }
-
-    if (res == 0 && (*dest & (FPW)0x00100010))
-	res = 1;	/* write failed, time out error is close enough	*/
-
-    *dest = (FPW)0x00500050;	/* clear status register	*/
-    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
-
-    return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect (flash_info_t * info, long sector, int prot)
-{
-	int rcode = 0;		/* assume success */
-	FPWV *addr;		/* address of sector */
-	FPW value;
-
-	addr = (FPWV *) (info->start[sector]);
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		flash_reset (info);		/* make sure in read mode */
-		*addr = (FPW) 0x00600060L;	/* lock command setup */
-		if (prot)
-			*addr = (FPW) 0x00010001L;	/* lock sector */
-		else
-			*addr = (FPW) 0x00D000D0L;	/* unlock sector */
-		flash_reset (info);		/* reset to read mode */
-
-		/* now see if it really is locked/unlocked as requested */
-		*addr = (FPW) 0x00900090;
-		/* read sector protection at sector address, (A7 .. A0) = 0x02.
-		 * D0 = 1 for each device if protected.
-		 * If at least one device is protected the sector is marked
-		 * protected, but return failure. Mixed protected and
-		 * unprotected devices within a sector should never happen.
-		 */
-		value = addr[2] & (FPW) 0x00010001;
-		if (value == 0)
-			info->protect[sector] = 0;
-		else if (value == (FPW) 0x00010001)
-			info->protect[sector] = 1;
-		else {
-			/* error, mixed protected and unprotected */
-			rcode = 1;
-			info->protect[sector] = 1;
-		}
-		if (info->protect[sector] != prot)
-			rcode = 1;	/* failed to protect/unprotect as requested */
-
-		/* reload all protection bits from hardware for now */
-		flash_sync_real_protect (info);
-		break;
-
-	case FLASH_AM640U:
-	default:
-		/* no hardware protect that we support */
-		info->protect[sector] = prot;
-		break;
-	}
-
-	return rcode;
-}
-#endif
diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
deleted file mode 100644
index 2562ecca350..00000000000
--- a/board/logodl/logodl.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * (C) 2002 Kyle Harris <kharris@nexus-tech.net>, Nexus Technologies, Inc.
- * (C) 2002 Marius Groeger <mgroeger@sysgo.de>, Sysgo GmbH
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	gd->bd->bi_arch_number = MACH_TYPE_LOGODL;
-	gd->bd->bi_boot_params = 0x08000100;
-	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
-
-	(*((volatile short*)0x14800000)) = 0xff; /* power on eth0 */
-	(*((volatile short*)0x14000000)) = 0xff; /* power on uart */
-
-	return 0;
-}
-
-
-/**
- * dram_init: - setup dynamic RAM
- *
- * @return: 0 in case of success
- */
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-
-/**
- * logodl_set_led: - switch LEDs on or off
- *
- * @param led:   LED to switch (0,1)
- * @param state: switch on (1) or off (0)
- */
-
-void logodl_set_led(int led, int state)
-{
-	switch(led) {
-
-	case 0:
-		if (state==1) {
-			CONFIG_SYS_LED_A_CR = CONFIG_SYS_LED_A_BIT;
-		} else if (state==0) {
-			CONFIG_SYS_LED_A_SR = CONFIG_SYS_LED_A_BIT;
-		}
-		break;
-
-	case 1:
-		if (state==1) {
-			CONFIG_SYS_LED_B_CR = CONFIG_SYS_LED_B_BIT;
-		} else if (state==0) {
-			CONFIG_SYS_LED_B_SR = CONFIG_SYS_LED_B_BIT;
-		}
-		break;
-	}
-
-	return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The LOGOTRONIC does only have 2 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
-	if (status < -32) status = -1;  /* let things compatible */
-	/*
-	  switch(status) {
-	  case  1: logodl_set_led(0,1); break;
-	  case  5: logodl_set_led(1,1); break;
-	  case 15: logodl_set_led(2,1); break;
-	  }
-	*/
-	logodl_set_led(0, (status & 1)==1);
-	logodl_set_led(1, (status & 2)==2);
-
-	return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/logodl/lowlevel_init.S b/board/logodl/lowlevel_init.S
deleted file mode 100644
index 9892430a1c7..00000000000
--- a/board/logodl/lowlevel_init.S
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
-
-/* wait for coprocessor write complete */
-   .macro CPWAIT reg
-   mrc  p15,0,\reg,c2,c0,0
-   mov  \reg,\reg
-   sub  pc,pc,#4
-   .endm
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-
-/*
- *	Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-    mov      r10, lr
-
-	/* Set up GPIO pins first ----------------------------------------- */
-
-	ldr		r0,	=GPSR0
-	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR1
-	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR2
-	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR0
-	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR1
-	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR2
-	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR0
-	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR1
-	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR2
-	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
-	str		r1,   [r0]
-
-	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CONFIG_SYS_PSSR_VAL
-	str		r1,   [r0]
-
-/*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
-/*	ldr	r2,	=CONFIG_SYS_MSC1_VAL	/  high - bank 3 Ethernet Controller */
-/*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
-/*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
-/* */
-/*	ldr	r1,	=LED_BLANK */
-/*	mov	r0,	#0xFF */
-/*	str	r0,	[r1]		/  turn on hex leds */
-/* */
-/*loop: */
-/* */
-/*   ldr	r0, =0xB0070001 */
-/*   ldr	r1, =_LED */
-/*   str	r0, [r1]		/  hex display */
-
-
-	/* ---------------------------------------------------------------- */
-	/* Enable memory interface                                          */
-	/*                                                                  */
-	/* The sequence below is based on the recommended init steps        */
-	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
-	/* Chapter 10.                                                      */
-	/* ---------------------------------------------------------------- */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
-	/*         clocks to settle. Only necessary after hard reset...     */
-	/*         FIXME: can be optimized later                            */
-	/* ---------------------------------------------------------------- */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty        */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-mem_init:
-
-	ldr     r1,  =MEMC_BASE		/* get memory controller base addr. */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2a: Initialize Asynchronous static memory controller        */
-	/* ---------------------------------------------------------------- */
-
-	/* MSC registers: timing, bus width, mem type                       */
-
-	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CONFIG_SYS_MSC0_VAL
-	str     r2,   [r1, #MSC0_OFFSET]
-	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
-						/* that data latches        */
-	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CONFIG_SYS_MSC1_VAL
-	str     r2,  [r1, #MSC1_OFFSET]
-	ldr     r2,  [r1, #MSC1_OFFSET]
-
-	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CONFIG_SYS_MSC2_VAL
-	str     r2,  [r1, #MSC2_OFFSET]
-	ldr     r2,  [r1, #MSC2_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2b: Initialize Card Interface                               */
-	/* ---------------------------------------------------------------- */
-
-	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CONFIG_SYS_MECR_VAL
-	str     r2,  [r1, #MECR_OFFSET]
-	ldr	r2,	[r1, #MECR_OFFSET]
-
-	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
-	str     r2,  [r1, #MCMEM0_OFFSET]
-	ldr	r2,	[r1, #MCMEM0_OFFSET]
-
-	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
-	str     r2,  [r1, #MCMEM1_OFFSET]
-	ldr	r2,	[r1, #MCMEM1_OFFSET]
-
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
-	str     r2,  [r1, #MCATT0_OFFSET]
-	ldr	r2,	[r1, #MCATT0_OFFSET]
-
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
-	str     r2,  [r1, #MCATT1_OFFSET]
-	ldr	r2,	[r1, #MCATT1_OFFSET]
-
-	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
-	str     r2,  [r1, #MCIO0_OFFSET]
-	ldr	r2,	[r1, #MCIO0_OFFSET]
-
-	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
-	str     r2,  [r1, #MCIO1_OFFSET]
-	ldr	r2,	[r1, #MCIO1_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
-	/* ---------------------------------------------------------------- */
-
-	/* test if we run from flash or RAM - RAM/BDI: don't setup RAM      */
-	adr	r3, mem_init		/* r0 <- current position of code   */
-	ldr	r2, =mem_init
-	cmp	r3, r2			/* skip init if in place            */
-	beq	initirqs
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
-	/* ---------------------------------------------------------------- */
-
-	/* Before accessing MDREFR we need a valid DRI field, so we set     */
-	/* this to power on defaults + DRI field.                           */
-
-	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
-	ldr	r2,	=0xFFF
-	and	r3,	r3, r2
-	ldr	r4,	=0x03ca4000
-	orr	r4,	r4,  r3
-
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-	ldr     r4,	[r1, #MDREFR_OFFSET]
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
-	/* ---------------------------------------------------------------- */
-
-	/* Initialize SXCNFG register. Assert the enable bits               */
-
-	/* Write SXMRS to cause an MRS command to all enabled banks of      */
-	/* synchronous static memory. Note that SXLCR need not be written   */
-	/* at this time.                                                    */
-
-	/* FIXME: we use async mode for now                                 */
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 4: Initialize SDRAM                                         */
-	/* ---------------------------------------------------------------- */
-
-	/* Step 4a: assert MDREFR:K?RUN and configure                       */
-	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
-
-	ldr	r4,	=CONFIG_SYS_MDREFR_VAL
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-	ldr	r4,	[r1, #MDREFR_OFFSET]
-
-	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
-
-	bic	r4,	r4, #(MDREFR_SLFRSH)
-
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,     [r1, #MDREFR_OFFSET]
-
-
-	/* Step 4c: assert MDREFR:E1PIN and E0PIO                           */
-
-	orr	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
-
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,     [r1, #MDREFR_OFFSET]
-
-
-	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
-	/*          configure but not enable each SDRAM partition pair.     */
-
-	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
-	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
-
-	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
-	ldr     r4,     [r1, #MDCNFG_OFFSET]
-
-
-	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
-	/*          100..200 µsec.                                          */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty        */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-
-	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
-	/*          attempting non-burst read or write accesses to disabled */
-	/*          SDRAM, as commonly specified in the power up sequence   */
-	/*          documented in SDRAM data sheets. The address(es) used   */
-	/*          for this purpose must not be cacheable.                 */
-
-	/*          There should 9 writes, since the first write doesn't    */
-	/*          trigger a refresh cycle on PXA250. See Intel PXA250 and */
-	/*          PXA210 Processors Specification Update,                 */
-	/*          Jan 2003, Errata #116, page 30.                         */
-
-
-	ldr	r3,	=CONFIG_SYS_DRAM_BASE
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-
-	/* Step 4g: Write MDCNFG with enable bits asserted                  */
-	/*          (MDCNFG:DEx set to 1).                                  */
-
-	ldr	r3, [r1, #MDCNFG_OFFSET]
-	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
-	str	r3, [r1, #MDCNFG_OFFSET]
-
-	/* Step 4h: Write MDMRS.                                            */
-
-	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
-	str     r2,  [r1, #MDMRS_OFFSET]
-
-
-	/* We are finished with Intel's memory controller initialisation    */
-
-	/* ---------------------------------------------------------------- */
-	/* Disable (mask) all interrupts at interrupt controller            */
-	/* ---------------------------------------------------------------- */
-
-initirqs:
-
-	mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
-	ldr     r2,  =ICLR
-	str     r1,  [r2]
-
-	ldr     r2,  =ICMR	/* mask all interrupts at the controller    */
-	str     r1,  [r2]
-
-
-	/* ---------------------------------------------------------------- */
-	/* Clock initialisation                                             */
-	/* ---------------------------------------------------------------- */
-
-initclks:
-
-	/* Disable the peripheral clocks, and set the core clock frequency  */
-	/* (hard-coding at 398.12MHz for now).                              */
-
-	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
-	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
-	ldr     r1,  =CKEN
-	mov     r2,  #0
-	str     r2,  [r1]
-
-
-	/* default value in case no valid rotary switch setting is found    */
-	ldr     r2, =(CCCR_L27|CCCR_M2|CCCR_N10)  /* DEFAULT: {200/200/100} */
-
-	/* ... and write the core clock config register                     */
-	ldr     r1,  =CCCR
-	str     r2,  [r1]
-
-	/* enable the 32Khz oscillator for RTC and PowerManager             */
-/*
-	ldr     r1,  =OSCC
-	mov     r2,  #OSCC_OON
-	str     r2,  [r1]
-*/
-	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
-	/* has settled.                                                     */
-60:
-	ldr     r2, [r1]
-	ands    r2, r2, #1
-	beq     60b
-
-	/* ---------------------------------------------------------------- */
-	/*                                                                  */
-	/* ---------------------------------------------------------------- */
-
-	/* Save SDRAM size                                                  */
-	ldr	r1, =DRAM_SIZE
-	str	r8, [r1]
-
-	/* Interrupt init: Mask all interrupts                              */
-	ldr	r0, =ICMR			/* enable no sources        */
-	mov	r1, #0
-	str	r1, [r0]
-
-	/* FIXME */
-
-#ifndef DEBUG
-	/*Disable software and data breakpoints */
-	mov	r0,#0
-	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
-	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
-	mcr	p15,0,r0,c14,c4,0  /* dbcon */
-
-	/*Enable all debug functionality */
-	mov	r0,#0x80000000
-	mcr	p14,0,r0,c10,c0,0  /* dcsr */
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* End lowlevel_init                                                     */
-	/* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
-    mov     pc, lr
diff --git a/boards.cfg b/boards.cfg
index 4c736802760..5dd7209491e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -59,7 +59,6 @@ cradle		arm	pxa
 csb226		arm	pxa
 delta		arm	pxa
 innokom		arm	pxa
-logodl		arm	pxa
 lubbock		arm	pxa
 pleb2		arm	pxa
 xaeniax		arm	pxa
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
deleted file mode 100644
index 0535ee127ff..00000000000
--- a/include/configs/logodl.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2003
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
- *
- * Configuration for the Logotronic DL board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/configs/logodl.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU            */
-#define CONFIG_GEALOG		1	/* on a Logotronic GEALOG SG board  */
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
-					/* for timer/console/ethernet       */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART		1	/* we use FFUART                    */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		19200
-#undef CONFIG_MISC_INIT_R		/* FIXME: misc_init_r() missing     */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_RUN
-
-
-#define CONFIG_BOOTDELAY	3
-/* #define CONFIG_BOOTARGS	"root=/dev/nfs ip=bootp console=ttyS0,19200" */
-#define CONFIG_BOOTARGS		"console=ttyS0,19200"
-#define CONFIG_ETHADDR		FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.1.56
-#define CONFIG_SERVERIP		192.168.1.2
-#define CONFIG_BOOTCOMMAND	"bootm 0x40000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG	1
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- *
- */
-#define CONFIG_SYS_MALLOC_LEN		(256*1024)
-
-#define CONFIG_SYS_LONGHELP				/* undef to save memory         */
-#define CONFIG_SYS_PROMPT		"uboot> "	/* Monitor Command Prompt       */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size      */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x08000000      /* memtest works on             */
-#define CONFIG_SYS_MEMTEST_END         0x0800ffff	/* 64 KiB                       */
-
-#define CONFIG_SYS_LOAD_ADDR           0x08000000      /* load kernel to this address   */
-
-#define CONFIG_SYS_HZ			1000
-						/* RS: the oscillator is actually 3680130?? */
-
-#define CONFIG_SYS_CPUSPEED            0x141           /* set core clock to 200/200/100 MHz */
-						/* 0101000001 */
-						/*      ^^^^^ Memory Speed 99.53 MHz         */
-						/*    ^^      Run Mode Speed = 2x Mem Speed  */
-						/* ^^         Turbo Mode Sp. = 1x Run M. Sp. */
-
-#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128 KiB */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * SMSC91C111 Network Card
- */
-#if 0
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111		1
-#define CONFIG_SMC91111_BASE		0x10000000 /* chip select 4         */
-#undef  CONFIG_SMC_USE_32_BIT		           /* 16 bit bus access     */
-#undef  CONFIG_SMC_91111_EXT_PHY		   /* we use internal phy   */
-#undef  CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT		10	   /* # of retries          */
-#endif
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
-#ifdef  CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of RAM    */
-#define PHYS_SDRAM_1		0x08000000	/* SRAM Bank #1             */
-#define PHYS_SDRAM_1_SIZE	(4*1024*1024)	/* 4 MB                     */
-
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1            */
-#define PHYS_FLASH_2		0x01000000	/* Flash Bank #2            */
-#define PHYS_FLASH_SIZE		(32*1024*1024)	/* 32 MB                    */
-
-#define CONFIG_SYS_DRAM_BASE		PHYS_SDRAM_1	/* RAM starts here          */
-#define CONFIG_SYS_DRAM_SIZE		PHYS_SDRAM_1_SIZE
-
-#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
-
-
-/*
- * GPIO settings
- *
- * GP?? == FOOBAR    is 0/1
- */
-
-#define _BIT0       0x00000001
-#define _BIT1       0x00000002
-#define _BIT2       0x00000004
-#define _BIT3       0x00000008
-
-#define _BIT4       0x00000010
-#define _BIT5       0x00000020
-#define _BIT6       0x00000040
-#define _BIT7       0x00000080
-
-#define _BIT8       0x00000100
-#define _BIT9       0x00000200
-#define _BIT10      0x00000400
-#define _BIT11      0x00000800
-
-#define _BIT12      0x00001000
-#define _BIT13      0x00002000
-#define _BIT14      0x00004000
-#define _BIT15      0x00008000
-
-#define _BIT16      0x00010000
-#define _BIT17      0x00020000
-#define _BIT18      0x00040000
-#define _BIT19      0x00080000
-
-#define _BIT20      0x00100000
-#define _BIT21      0x00200000
-#define _BIT22      0x00400000
-#define _BIT23      0x00800000
-
-#define _BIT24      0x01000000
-#define _BIT25      0x02000000
-#define _BIT26      0x04000000
-#define _BIT27      0x08000000
-
-#define _BIT28      0x10000000
-#define _BIT29      0x20000000
-#define _BIT30      0x40000000
-#define _BIT31      0x80000000
-
-
-#define CONFIG_SYS_LED_A_BIT           (_BIT18)
-#define CONFIG_SYS_LED_A_SR            GPSR0
-#define CONFIG_SYS_LED_A_CR            GPCR0
-
-#define CONFIG_SYS_LED_B_BIT           (_BIT16)
-#define CONFIG_SYS_LED_B_SR            GPSR1
-#define CONFIG_SYS_LED_B_CR            GPCR1
-
-
-/* LED A: off, LED B: off */
-#define CONFIG_SYS_GPSR0_VAL       (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT18)
-#define CONFIG_SYS_GPSR1_VAL       (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25  +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13)
-#define CONFIG_SYS_GPSR2_VAL       (_BIT14+_BIT15+_BIT16)
-
-#define CONFIG_SYS_GPCR0_VAL       0x00000000
-#define CONFIG_SYS_GPCR1_VAL       0x00000000
-#define CONFIG_SYS_GPCR2_VAL       0x00000000
-
-#define CONFIG_SYS_GPDR0_VAL       (_BIT1+_BIT6+_BIT8+_BIT9+_BIT11+_BIT15+_BIT16+_BIT17+_BIT18)
-#define CONFIG_SYS_GPDR1_VAL       (_BIT0+_BIT1+_BIT16+_BIT24+_BIT25  +_BIT7+_BIT8+_BIT9+_BIT11+_BIT13)
-#define CONFIG_SYS_GPDR2_VAL       (_BIT14+_BIT15+_BIT16)
-
-#define CONFIG_SYS_GAFR0_L_VAL     (_BIT22+_BIT24+_BIT31)
-#define CONFIG_SYS_GAFR0_U_VAL     (_BIT15+_BIT17+_BIT19+\
-			     _BIT20+_BIT22+_BIT24+_BIT26+_BIT29+_BIT31)
-#define CONFIG_SYS_GAFR1_L_VAL     (_BIT3+_BIT4+_BIT6+_BIT8+_BIT10+_BIT12+_BIT15+_BIT17+_BIT19+\
-			     _BIT20+_BIT23+_BIT24+_BIT27+_BIT28+_BIT31)
-#define CONFIG_SYS_GAFR1_U_VAL     (_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31)
-#define CONFIG_SYS_GAFR2_L_VAL     (_BIT1+_BIT3+_BIT5+_BIT7+_BIT9+_BIT11+_BIT13+_BIT15+_BIT17+\
-			     _BIT19+_BIT21+_BIT23+_BIT25+_BIT27+_BIT29+_BIT31)
-#define CONFIG_SYS_GAFR2_U_VAL     (_BIT1)
-
-#define CONFIG_SYS_PSSR_VAL        (0x20)
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL	0x123c2980
-#define CONFIG_SYS_MSC1_VAL	0x123c2661
-#define CONFIG_SYS_MSC2_VAL	0x7ff87ff8
-
-
-/* no sdram/pcmcia here */
-#define CONFIG_SYS_MDCNFG_VAL		0x00000000
-#define CONFIG_SYS_MDREFR_VAL		0x00000000
-#define CONFIG_SYS_MDREFR_VAL_100	0x00000000
-#define CONFIG_SYS_MDMRS_VAL		0x00000000
-
-/* only SRAM */
-#define SXCNFG_SETTINGS	0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-
-#define CONFIG_SYS_MECR_VAL        0x00000000
-#define CONFIG_SYS_MCMEM0_VAL      0x00010504
-#define CONFIG_SYS_MCMEM1_VAL      0x00010504
-#define CONFIG_SYS_MCATT0_VAL      0x00010504
-#define CONFIG_SYS_MCATT1_VAL      0x00010504
-#define CONFIG_SYS_MCIO0_VAL       0x00004715
-#define CONFIG_SYS_MCIO1_VAL       0x00004715
-
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT      128  /* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* FIXME */
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR            (PHYS_FLASH_1 + 0x1C000)        /* Addr of Environment Sector   */
-#define CONFIG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
-
-#endif  /* __CONFIG_H */